Changeset 9996 in ntrip for branches/BNC_2.13/src/pppWidgets.cpp

Timestamp:

Feb 28, 2023, 7:59:28 AM (19 months ago)

Author:

stuerze

Message:

switch off DCM

File:

• branches/BNC_2.13/src/pppWidgets.cpp (modified) (2 diffs)

branches/BNC_2.13/src/pppWidgets.cpp

@@ -156 +156 @@
   _pseudoObs->addItems(QString("no").split(","));
 #else
-  _modelObs->addItems(QString("Uncombined PPP,Ionosphere-free PPP,DCM with Code Biases,DCM with Phase Biases").split(","));
+  _modelObs->addItems(QString("Uncombined PPP,Ionosphere-free PPP").split(","));
   _pseudoObs->addItems(QString("no,Ionosphere").split(","));
 #endif
@@ -214 +214 @@
   // WhatsThis, PPP (3)
   // ------------------
-  _staTable->setWhatsThis(tr("<p>Specify values for Sigma and white Noise of the Stations North, East and Height coordinate components in meters. Specify also a Sigma in meters for a priori model based Tropospheric delays and a Sigma in meters per second for the delay's Noise. You can also specify a 'NMEA Port' to output coordinates in NMEA format through an IP port of your local host. Specify a list of signal priorities for the observations that shall be used for PPP.</p><p>Specifying one record per Station is mandatory. BNC will only process data for stations which are listed here. To define a station, specify the 'Mountpoint' when in 'Real-Time Streams' mode or the 4-character station ID when in 'RINEX Files' mode.</p><p>'Sigma' is meant to describe the uncertainty of a single coordinate or tropospheric delay estimated for one epoch. 'Noise' is meant to describe the variation of estimates from epoch to epoch.</p><p><ul><li>A Sigma of 100.0 meters may be an appropriate choice e.g. for the initial N/E/H coordinates. However, this value may be significantly smaller (i.e. 0.01) for stations with well-known a priori coordinates.</li><li>A Noise of 100.0 meters for the estimated N/E/H coordinates may also be appropriate considering the potential movement of a rover position.</li><li>A value of 0.1 meters may be an appropriate Sigma for the a priori model based Tropospheric delay estimation.</li><li>Specify a Noise to describe the expected variation of the tropospheric effect over time. Supposing 1Hz observation data, specifying a value of 3e-6 would mean that the tropospheric effect may vary 3600 * 3e-6 = 0.01 meters per hour.</li></ul></p><p>'Signal Priorities' can be specified as equal for all systems, as system specific or as system and frequency specific. Please note, for 'DCM with Phase Biases' or 'DCM with Code Biases' at the moment only one code or phase bias per system (G,R,E,C)/modulation can be considered. Hence, for example the following list of 'Signal Priorities' would be valid: <ul><li>'G:12&CW R:12&CP E:1&CX E:5&QX C:26&I'</li></ul><p>For all other PPP models for example the following list of 'Signal Priorities' can be used:</p> <ul><li>'G:12&CWPSLX R:12&CP E:1&CBX E:5&QIX C:26&IQX'</li></ul> <p> <i>[key: PPP/staTable]</i></p>"));
+  _staTable->setWhatsThis(tr("<p>Specify values for Sigma and white Noise of the Stations North, East and Height coordinate components in meters. Specify also a Sigma in meters for a priori model based Tropospheric delays and a Sigma in meters per second for the delay's Noise. You can also specify a 'NMEA Port' to output coordinates in NMEA format through an IP port of your local host. Specify a list of signal priorities for the observations that shall be used for PPP.</p><p>Specifying one record per Station is mandatory. BNC will only process data for stations which are listed here. To define a station, specify the 'Mountpoint' when in 'Real-Time Streams' mode or the 4-character station ID when in 'RINEX Files' mode.</p><p>'Sigma' is meant to describe the uncertainty of a single coordinate or tropospheric delay estimated for one epoch. 'Noise' is meant to describe the variation of estimates from epoch to epoch.</p><p><ul><li>A Sigma of 100.0 meters may be an appropriate choice e.g. for the initial N/E/H coordinates. However, this value may be significantly smaller (i.e. 0.01) for stations with well-known a priori coordinates.</li><li>A Noise of 100.0 meters for the estimated N/E/H coordinates may also be appropriate considering the potential movement of a rover position.</li><li>A value of 0.1 meters may be an appropriate Sigma for the a priori model based Tropospheric delay estimation.</li><li>Specify a Noise to describe the expected variation of the tropospheric effect over time. Supposing 1Hz observation data, specifying a value of 3e-6 would mean that the tropospheric effect may vary 3600 * 3e-6 = 0.01 meters per hour.</li></ul></p><p>'Signal Priorities' can be specified as equal for all systems, as system specific or as system and frequency specific. <p>For the PPP models for example the following list of 'Signal Priorities' can be used:</p> <ul><li>'G:12&CWPSLX R:12&CP E:1&CBX E:5&QIX C:26&IQX'</li></ul> <p> <i>[key: PPP/staTable]</i></p>"));
 
   // WhatsThis, PPP (4)