Changeset 10503 in ntrip for trunk/BNC/src/bncwindow.cpp
- Timestamp:
- Jun 7, 2024, 11:41:06 AM (3 weeks ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
trunk/BNC/src/bncwindow.cpp
r10479 r10503 1500 1500 _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information. <i>[key: miscIntr]</i></p>")); 1501 1501 _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types. <i>[key: miscScanRTCM]</i></p>")); 1502 _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function. <i>[key: miscPort]</i></p>")); 1502 _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function. In this case, the stream content remains untouched; BNC does not decode or reformat the data for this output.</p><p> If the decoder string is not an accepted one ('RTCM_2.x', 'RTCM_3.x' and 'RTNET'), please change the decoder string to <ul>" 1503 "<li> 'ZERO' (forward the raw data) or </li>" 1504 "<li> 'ZERO2File' (forward and store the raw data)</li> </ul> in addition. <i>[key: miscPort]</i></p>")); 1503 1505 1504 1506 // WhatsThis, PPP (1) … … 1642 1644 // WhatsThis, Streams Canvas 1643 1645 // ------------------------- 1644 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. <i>[key: mountPoints]</i></p>")); 1646 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. " 1647 "Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster " 1648 "according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it " 1649 "and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>" 1650 "BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. " 1651 "BNC allows users to change this selection by editing the decoder string. " 1652 "Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. " 1653 "Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>" 1654 "In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. " 1655 "To do this, specify the decoder string as 'ZERO2FILE'.</p><p>" 1656 "BNC allows as well to forward streams related to the specified 'Mountpoint' on top of the 'Miscellaneous Panel' " 1657 "through a TCP/IP port of your local host. " 1658 "In this case, the stream content remains untouched; BNC does not decode or reformat the data for this output. " 1659 "If the decoder string is not an accepted one, please change the decoder string to 'ZERO' (forward the raw data only) or 'ZERO2FILE' (forward and store the raw data) in addition.</p><p>" 1660 "BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. " 1661 "To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster " 1662 "together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. " 1663 "Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. <i>[key: mountPoints]</i></p>")); 1645 1664 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>")); 1646 1665 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
Note:
See TracChangeset
for help on using the changeset viewer.