Changeset 683 in ntrip for trunk/BNC/bncwindow.cpp
- Timestamp:
- Feb 13, 2008, 2:34:11 PM (17 years ago)
- File:
-
- 1 edited
-
trunk/BNC/bncwindow.cpp (modified) (12 diffs)
Legend:
- Unmodified
- Added
- Removed
-
trunk/BNC/bncwindow.cpp
r682 r683 103 103 QSettings settings; 104 104 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString()); 105 // _proxyHostLineEdit->setMaximumWidth(12*ww);106 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is often not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));107 105 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString()); 108 106 _proxyPortLineEdit->setMaximumWidth(9*ww); 109 _proxyPortLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is often not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));110 107 _waitTimeSpinBox = new QSpinBox(); 111 108 _waitTimeSpinBox->setMinimum(1); … … 115 112 _waitTimeSpinBox->setMaximumWidth(9*ww); 116 113 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt()); 117 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS engine waiting for input epoch by epoch, BNC drops whatever is received later than 'Wait for full epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS engine or products.</p><p>Note that 'Wait for full epoch' does not effect the RINEX Observation file content. Observations received later than 'Wait for full epoch' seconds will still be included in the RINEX Observation files.</p>"));118 114 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString()); 119 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));120 115 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString()); 121 116 _outPortLineEdit->setMaximumWidth(9*ww); 122 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in binary format on your local host through an IP port. Specify a port number here to activate this function."));123 117 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString()); 124 118 _outEphPortLineEdit->setMaximumWidth(9*ww); 125 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));126 119 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString()); 127 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));128 120 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString()); 129 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));130 121 131 122 _rnxV3CheckBox = new QCheckBox(); … … 134 125 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt())); 135 126 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString()); 136 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p><p>The triggering event for calling the script or batch file is the end of a RINEX Observation file 'Interval'. If that is overridden by a stream outage, the triggering event is the stream reconnection.</p>"));137 127 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString()); 138 128 _rnxSkelLineEdit->setMaximumWidth(5*ww); 139 _rnxSkelLineEdit->setWhatsThis(tr("<p>Whenever BNC starts generating RINEX Observation files (and then once every day at midnight), it first tries to retrieve information needed for RINEX headers from so-called public RINEX header skeleton files which are derived from sitelogs. However, sometimes public RINEX header skeleton files are not available, its contents is not up to date, or you need to put additional/optional records in the RINEX header.</p><p>For that BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog. A file in the RINEX 'Directory' with the RINEX 'Skeleton extension' is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));140 129 _rnxAppendCheckBox = new QCheckBox(); 141 130 _rnxAppendCheckBox->setCheckState(Qt::CheckState( 142 131 settings.value("rnxAppend").toInt())); 143 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));144 132 _rnxIntrComboBox = new QComboBox(); 145 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));146 133 _rnxIntrComboBox->setMaximumWidth(9*ww); 147 134 _rnxIntrComboBox->setEditable(false); … … 152 139 } 153 140 _ephIntrComboBox = new QComboBox(); 154 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));155 141 _ephIntrComboBox->setMaximumWidth(9*ww); 156 142 _ephIntrComboBox->setEditable(false); … … 161 147 } 162 148 _rnxSamplSpinBox = new QSpinBox(); 163 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));164 149 _rnxSamplSpinBox->setMinimum(0); 165 150 _rnxSamplSpinBox->setMaximum(60); … … 175 160 _inspSegmSpinBox->setValue(settings.value("inspSegm").toInt()); 176 161 _inspSegmSpinBox->setSuffix(" sec"); 177 _inspSegmSpinBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span (Inspect segment) to then decide whether the stream content of that segment is corrupted or not. When a continuous problem is detected in consecutive segments, BNC can inform its operator about this event through an Advisory note. A value of about 15 sec (default) as 'Inspect segment' is recommended when handling 1Hz data.</p><p>A value of zero '0' means that you don't want BNC to inform you about incoming data that can not be decoded.</p>"));178 162 _adviseRecoSpinBox = new QSpinBox(); 179 163 _adviseRecoSpinBox->setMinimum(0); … … 183 167 _adviseRecoSpinBox->setMaximumWidth(9*ww); 184 168 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt()); 185 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of corrupted 'Inspect segments', an Advisory note is generated when valid 'Inspect segments' are received again throughout the 'Recovery' threshold time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery BNC immediately generates an Advisory note.</p><p>Note that using this function for corrupted streams needs an 'Inspect segment' greater zero '0'.</p>"));186 169 _adviseFailSpinBox = new QSpinBox(); 187 170 _adviseFailSpinBox->setMinimum(0); … … 191 174 _adviseFailSpinBox->setMaximumWidth(9*ww); 192 175 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt()); 193 _adviseFailSpinBox->setWhatsThis(tr("<p>An Advisory note is generated when no (or only corrupted) observations are seen in all 'Inspect segments' throughout the 'Failure' threshold time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure BNC immediately generates an Advisory note!</p><p>Note that using this function for corrupted streams needs an 'Inspect segment' greater zero '0'.</p>"));194 176 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString()); 195 _logFileLineEdit->setWhatsThis(tr("Records of BNC's activities are shown in the Log section on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field."));196 177 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString()); 197 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle Advisory notes generated in the event of corrupted streams of stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script can be configured to send an email to BNC's operator and/or to the affected stream provider. An empty option field or invalid path means that you don't want to use this option.</p>"));198 178 _mountPointsTable = new QTableWidget(0,7); 199 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Mountpoints' section. Clicking on 'Add Mountpoints' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Mountpoints' list, highlight it by clicking on it and hit the 'Delete Mountpoints' button. You can also remove multiple mountpoints by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' and 'format-details' as given in the sourcetable. However, there might be cases where you need to override the automatic selection due to incorrect sourcetable for example. BNC allows users to manually select the required decoder by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x', and 'RTIGS'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). To initiate these streams, an approximate rover position needs to be sent in NMEA GGA message to the NTRIP broadcaster. In return, a user-specific data stream is generated, typically by a Network-RTK software. This stream is customized to the exact latitude and longitude as shown in the 'lat' and 'long' columns under 'Mountpoints'. These VRS streams are indicated by a 'yes' in the 'nmea' column under 'Mountpoints' as well as in the sourcetable. The default 'lat' and 'long' values are taken from the sourcetable. However, in most cases you would probably want to change this according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. The format is in positive north latitude degrees (e.g. for northern hemisphere: 52.436, for southern hemisphere: -24.567) and eastern longitude degrees (e.g.: 358.872 or -1.128). Only mountpoints with a 'yes' in its 'nmea' column can be edited. The position should preferably be a point within the coverage of the network.</p>"));200 179 201 180 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww); … … 272 251 _log->setReadOnly(true); 273 252 253 // WhatsThis 254 // --------- 255 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is often not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>")); 256 _proxyPortLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is often not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>")); 257 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS engine waiting for input epoch by epoch, BNC drops whatever is received later than 'Wait for full epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS engine or products.</p><p>Note that 'Wait for full epoch' does not effect the RINEX Observation file content. Observations received later than 'Wait for full epoch' seconds will still be included in the RINEX Observation files.</p>")); 258 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams.")); 259 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in binary format on your local host through an IP port. Specify a port number here to activate this function.")); 260 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function.")); 261 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files.")); 262 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files.")); 263 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p><p>The triggering event for calling the script or batch file is the end of a RINEX Observation file 'Interval'. If that is overridden by a stream outage, the triggering event is the stream reconnection.</p>")); 264 _rnxSkelLineEdit->setWhatsThis(tr("<p>Whenever BNC starts generating RINEX Observation files (and then once every day at midnight), it first tries to retrieve information needed for RINEX headers from so-called public RINEX header skeleton files which are derived from sitelogs. However, sometimes public RINEX header skeleton files are not available, its contents is not up to date, or you need to put additional/optional records in the RINEX header.</p><p>For that BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog. A file in the RINEX 'Directory' with the RINEX 'Skeleton extension' is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>")); 265 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>")); 266 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>")); 267 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>")); 268 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>")); 269 _inspSegmSpinBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span (Inspect segment) to then decide whether the stream content of that segment is corrupted or not. When a continuous problem is detected in consecutive segments, BNC can inform its operator about this event through an Advisory note. A value of about 15 sec (default) as 'Inspect segment' is recommended when handling 1Hz data.</p><p>A value of zero '0' means that you don't want BNC to inform you about incoming data that can not be decoded.</p>")); 270 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of corrupted 'Inspect segments', an Advisory note is generated when valid 'Inspect segments' are received again throughout the 'Recovery' threshold time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery BNC immediately generates an Advisory note.</p><p>Note that using this function for corrupted streams needs an 'Inspect segment' greater zero '0'.</p>")); 271 _adviseFailSpinBox->setWhatsThis(tr("<p>An Advisory note is generated when no (or only corrupted) observations are seen in all 'Inspect segments' throughout the 'Failure' threshold time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure BNC immediately generates an Advisory note!</p><p>Note that using this function for corrupted streams needs an 'Inspect segment' greater zero '0'.</p>")); 272 _logFileLineEdit->setWhatsThis(tr("Records of BNC's activities are shown in the Log section on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.")); 273 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle Advisory notes generated in the event of corrupted streams of stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script can be configured to send an email to BNC's operator and/or to the affected stream provider. An empty option field or invalid path means that you don't want to use this option.</p>")); 274 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Mountpoints' section. Clicking on 'Add Mountpoints' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Mountpoints' list, highlight it by clicking on it and hit the 'Delete Mountpoints' button. You can also remove multiple mountpoints by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' and 'format-details' as given in the sourcetable. However, there might be cases where you need to override the automatic selection due to incorrect sourcetable for example. BNC allows users to manually select the required decoder by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x', and 'RTIGS'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). To initiate these streams, an approximate rover position needs to be sent in NMEA GGA message to the NTRIP broadcaster. In return, a user-specific data stream is generated, typically by a Network-RTK software. This stream is customized to the exact latitude and longitude as shown in the 'lat' and 'long' columns under 'Mountpoints'. These VRS streams are indicated by a 'yes' in the 'nmea' column under 'Mountpoints' as well as in the sourcetable. The default 'lat' and 'long' values are taken from the sourcetable. However, in most cases you would probably want to change this according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. The format is in positive north latitude degrees (e.g. for northern hemisphere: 52.436, for southern hemisphere: -24.567) and eastern longitude degrees (e.g.: 358.872 or -1.128). Only mountpoints with a 'yes' in its 'nmea' column can be edited. The position should preferably be a point within the coverage of the network.</p>")); 274 275 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' section. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc.")); 275 276 276 _ephV3CheckBox->setWhatsThis(tr("The default format for RINEX Navigation files containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to save the ephemeris in RINEX Version 3 format.")); 277 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format.")); 277 278 278 279 // Canvas with Editable Fields … … 294 295 aogroup->addTab(sgroup,tr("Synchronized Observations")); 295 296 aogroup->addTab(agroup,tr("Advisory")); 296 297 297 298 298 QGridLayout* pLayout = new QGridLayout; … … 343 343 eLayout->addWidget(new QLabel("Version 3"), 3, 0); 344 344 eLayout->addWidget(_ephV3CheckBox, 3, 1); 345 _ephV3CheckBox->setWhatsThis(tr("The default format for RINEX Navigation files containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to save the ephemeris in RINEX Version 3 format."));346 345 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),4,0,1,2,Qt::AlignLeft); 347 346 eLayout->addWidget(new QLabel(" "),5,0); … … 379 378 oLayout->addWidget(new QLabel("Version 3"), 4, 0); 380 379 oLayout->addWidget(_rnxV3CheckBox, 4, 1); 381 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));382 380 oLayout->addWidget(new QLabel("Saving RINEX observation files."),5,0,1,4, Qt::AlignLeft); 383 381 ogroup->setLayout(oLayout);
Note:
See TracChangeset
for help on using the changeset viewer.
