source: ntrip/trunk/BNC/src/bncwindow.cpp @ 8233

Last change on this file since 8233 was 8233, checked in by wiese, 2 years ago

CHANGE: access resource with :/

File size: 158.0 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <QAction>
44#include <QApplication>
45#include <QCheckBox>
46#include <QComboBox>
47#include <QDialog>
48#include <QFontDialog>
49#include <QGridLayout>
50#include <QHeaderView>
51#include <QLabel>
52#include <QLineEdit>
53#include <QMenu>
54#include <QMenuBar>
55#include <QMessageBox>
56#include <QPushButton>
57#include <QRadioButton>
58#include <QSpinBox>
59#include <QTableWidgetItem>
60#include <QTextEdit>
61#include <QToolBar>
62
63#include <unistd.h>
64#include "bncwindow.h"
65#include "bnccore.h"
66#include "bncgetthread.h"
67#include "bnctabledlg.h"
68#include "bncipport.h"
69#include "bncudpport.h"
70#include "bncserialport.h"
71#include "bnchlpdlg.h"
72#include "bnchtml.h"
73#include "bnctableitem.h"
74#include "bncsettings.h"
75#include "bncfigure.h"
76#include "bncfigurelate.h"
77#include "bncfigureppp.h"
78#include "bncversion.h"
79#include "bncbytescounter.h"
80#include "bncsslconfig.h"
81#include "upload/bnccustomtrafo.h"
82#include "upload/bncephuploadcaster.h"
83#include "qtfilechooser.h"
84#include "reqcdlg.h"
85#include "bncmap.h"
86#include "rinex/reqcedit.h"
87#include "rinex/reqcanalyze.h"
88#include "orbComp/sp3Comp.h"
89#ifdef QT_WEBKIT
90#  include "map/bncmapwin.h"
91#endif
92
93using namespace std;
94
95#ifdef GNSSCENTER_PLUGIN
96Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
97#endif
98
99// Constructor
100////////////////////////////////////////////////////////////////////////////
101bncWindow::bncWindow() {
102
103  const static QPalette paletteWhite(QColor(255, 255, 255));
104  const static QPalette paletteGray(QColor(230, 230, 230));
105
106#ifdef GNSSCENTER_PLUGIN
107  BNC_CORE->setConfFileName("");
108#endif
109
110  _caster    = 0;
111  _casterEph = 0;
112
113  _bncFigure     = new bncFigure(this);
114  _bncFigureLate = new bncFigureLate(this);
115  _bncFigurePPP  = new bncFigurePPP(this);
116
117  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
118          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
119
120  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
121  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
122
123  _runningRealTime    = false;
124  _runningPPP         = false;
125  _runningEdit        = false;
126  _runningQC          = false;
127  _runningSp3Comp     = false;
128  _reqcActionComboBox = 0; // necessary for enableStartStop()
129
130  _mapWin = 0;
131
132  int ww = QFontMetrics(this->font()).width('w');
133
134  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
135
136  setMinimumSize(100*ww, 70*ww);
137
138  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
139
140  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
141          this, SLOT(slotWindowMessage(QByteArray,bool)));
142
143  // Create Actions
144  // --------------
145  _actHelp = new QAction(tr("&Help Contents"),this);
146  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
147
148  _actAbout = new QAction(tr("&About BNC"),this);
149  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
150
151  _actFlowchart = new QAction(tr("&Flow Chart"),this);
152  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
153
154  _actFontSel = new QAction(tr("Select &Font"),this);
155  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
156
157  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
158  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
159
160  _actQuit  = new QAction(tr("&Quit"),this);
161  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
162
163  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
164  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
165
166  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
167  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
168  _actDeleteMountPoints->setEnabled(false);
169
170  _actMapMountPoints = new QAction(tr("&Map"),this);
171  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
172
173  _actStart = new QAction(tr("Sta&rt"),this);
174  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
175
176  _actStop = new QAction(tr("Sto&p"),this);
177  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
178
179  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
180  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
181
182  CreateMenu();
183  AddToolbar();
184
185  bncSettings settings;
186
187  // Network Options
188  // ---------------
189  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
190  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
191
192  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
193          this, SLOT(slotBncTextChanged()));
194
195  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
196  _sslIgnoreErrorsCheckBox = new QCheckBox();
197  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
198                                          settings.value("sslIgnoreErrors").toInt()));
199
200  // General Options
201  // ---------------
202  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
203  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
204  _rnxAppendCheckBox  = new QCheckBox();
205  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
206                                    settings.value("rnxAppend").toInt()));
207  _onTheFlyComboBox = new QComboBox();
208  _onTheFlyComboBox->setEditable(false);
209  _onTheFlyComboBox->addItems(QString("no,1 day,1 hour,5 min,1 min").split(","));
210  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
211  if (ii != -1) {
212    _onTheFlyComboBox->setCurrentIndex(ii);
213  }
214  _autoStartCheckBox  = new QCheckBox();
215  _autoStartCheckBox->setCheckState(Qt::CheckState(
216                                    settings.value("autoStart").toInt()));
217
218  // RINEX Observations Options
219  // --------------------------
220  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
221  _rnxIntrComboBox    = new QComboBox();
222  _rnxIntrComboBox->setEditable(false);
223  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
224  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
225  if (ii != -1) {
226    _rnxIntrComboBox->setCurrentIndex(ii);
227  }
228  _rnxSamplSpinBox    = new QSpinBox();
229  _rnxSamplSpinBox->setMinimum(0);
230  _rnxSamplSpinBox->setMaximum(60);
231  _rnxSamplSpinBox->setSingleStep(5);
232  _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
233  _rnxFileCheckBox = new QCheckBox();
234  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
235  _rnxSamplSpinBox->setSuffix(" sec");
236  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
237  _rnxSkelLineEdit->setMaximumWidth(5*ww);
238  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
239  _rnxV3CheckBox      = new QCheckBox();
240  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
241  _rnxV3filenameCheckBox = new QCheckBox();
242  _rnxV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3filenames").toInt()));
243  QString hlp = settings.value("rnxV2Priority").toString();
244  if (hlp.isEmpty()) {
245    hlp = "G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_";
246  }
247  _rnxV2Priority = new QLineEdit(hlp);
248
249  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
250          this, SLOT(slotBncTextChanged()));
251  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
252          this, SLOT(slotBncTextChanged()));
253
254  // RINEX Ephemeris Options
255  // -----------------------
256  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
257  _ephIntrComboBox    = new QComboBox();
258  _ephIntrComboBox->setEditable(false);
259  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
260  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
261  if (jj != -1) {
262    _ephIntrComboBox->setCurrentIndex(jj);
263  }
264  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
265  _ephV3CheckBox = new QCheckBox();
266  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
267
268  _ephV3filenameCheckBox = new QCheckBox();
269  _ephV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("ephV3filenames").toInt()));
270
271  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
272          this, SLOT(slotBncTextChanged()));
273
274  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
275          this, SLOT(slotBncTextChanged()));
276
277  // Broadcast Corrections Options
278  // -----------------------------
279  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
280  _corrIntrComboBox    = new QComboBox();
281  _corrIntrComboBox->setEditable(false);
282  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
283  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
284  if (mm != -1) {
285    _corrIntrComboBox->setCurrentIndex(mm);
286  }
287  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
288
289  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
290          this, SLOT(slotBncTextChanged()));
291
292  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
293          this, SLOT(slotBncTextChanged()));
294
295  // Feed Engine Options
296  // -------------------
297  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
298  _outWaitSpinBox   = new QSpinBox();
299  _outWaitSpinBox->setMinimum(1);
300  _outWaitSpinBox->setMaximum(30);
301  _outWaitSpinBox->setSingleStep(1);
302  _outWaitSpinBox->setSuffix(" sec");
303  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
304  _outSamplSpinBox    = new QSpinBox();
305  _outSamplSpinBox->setMinimum(0);
306  _outSamplSpinBox->setMaximum(60);
307  _outSamplSpinBox->setSingleStep(5);
308  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
309  _outSamplSpinBox->setSuffix(" sec");
310  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
311  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
312
313  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
314          this, SLOT(slotBncTextChanged()));
315
316  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
317          this, SLOT(slotBncTextChanged()));
318
319  // Serial Output Options
320  // ---------------------
321  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
322  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
323  _serialBaudRateComboBox = new QComboBox();
324  _serialBaudRateComboBox->addItems(QString("110,300,600,"
325            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
326  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
327  if (kk != -1) {
328    _serialBaudRateComboBox->setCurrentIndex(kk);
329  }
330  _serialFlowControlComboBox = new QComboBox();
331  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
332  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
333  if (kk != -1) {
334    _serialFlowControlComboBox->setCurrentIndex(kk);
335  }
336  _serialDataBitsComboBox = new QComboBox();
337  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
338  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
339  if (kk != -1) {
340    _serialDataBitsComboBox->setCurrentIndex(kk);
341  }
342  _serialParityComboBox   = new QComboBox();
343  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
344  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
345  if (kk != -1) {
346    _serialParityComboBox->setCurrentIndex(kk);
347  }
348  _serialStopBitsComboBox = new QComboBox();
349  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
350  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
351  if (kk != -1) {
352    _serialStopBitsComboBox->setCurrentIndex(kk);
353  }
354  _serialAutoNMEAComboBox  = new QComboBox();
355  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
356  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
357  if (kk != -1) {
358    _serialAutoNMEAComboBox->setCurrentIndex(kk);
359  }
360  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
361  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
362
363  _serialManualNMEASamplingSpinBox = new QSpinBox();
364  _serialManualNMEASamplingSpinBox->setMinimum(0);
365  _serialManualNMEASamplingSpinBox->setMaximum(300);
366  _serialManualNMEASamplingSpinBox->setSingleStep(10);
367  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
368  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
369
370  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
371          this, SLOT(slotBncTextChanged()));
372
373  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
374          this, SLOT(slotBncTextChanged()));
375
376  // Outages Options
377  // ---------------
378  _adviseObsRateComboBox    = new QComboBox();
379  _adviseObsRateComboBox->setEditable(false);
380  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
381  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
382  if (kk != -1) {
383    _adviseObsRateComboBox->setCurrentIndex(kk);
384  }
385  _adviseFailSpinBox = new QSpinBox();
386  _adviseFailSpinBox->setMinimum(0);
387  _adviseFailSpinBox->setMaximum(60);
388  _adviseFailSpinBox->setSingleStep(1);
389  _adviseFailSpinBox->setSuffix(" min");
390  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
391  _adviseRecoSpinBox = new QSpinBox();
392  _adviseRecoSpinBox->setMinimum(0);
393  _adviseRecoSpinBox->setMaximum(60);
394  _adviseRecoSpinBox->setSingleStep(1);
395  _adviseRecoSpinBox->setSuffix(" min");
396  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
397  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
398
399  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
400          this, SLOT(slotBncTextChanged()));
401
402  // Miscellaneous Options
403  // ---------------------
404  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
405  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
406  _miscIntrComboBox   = new QComboBox();
407  _miscIntrComboBox->setEditable(false);
408  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
409  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
410  if (ll != -1) {
411    _miscIntrComboBox->setCurrentIndex(ll);
412  }
413  _miscScanRTCMCheckBox  = new QCheckBox();
414  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
415                                    settings.value("miscScanRTCM").toInt()));
416
417  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
418          this, SLOT(slotBncTextChanged()));
419
420  // Streams
421  // -------
422  _mountPointsTable   = new QTableWidget(0,9);
423
424  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
425  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
426  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
427  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
428  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
429  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
430  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
431#if QT_VERSION < 0x050000
432  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
433#else
434  _mountPointsTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
435#endif
436  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
437  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
438  _mountPointsTable->setHorizontalHeaderLabels(labels);
439  _mountPointsTable->setGridStyle(Qt::NoPen);
440  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
441  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
442  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
443  _mountPointsTable->hideColumn(0);
444  _mountPointsTable->hideColumn(3);
445  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
446          SLOT(slotSelectionChanged()));
447  populateMountPointsTable();
448
449  _log = new QTextEdit();
450  _log->setReadOnly(true);
451  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
452  _log->setFont(msFont);
453  _log->document()->setMaximumBlockCount(1000);
454
455  // Combine Corrections
456  // -------------------
457  _cmbTable = new QTableWidget(0,3);
458  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
459  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
460  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
461  _cmbTable->setMaximumWidth(30*ww);
462  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
463  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
464  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
465#if QT_VERSION < 0x050000
466  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
467#else
468  _cmbTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
469#endif
470  _cmbTable->horizontalHeader()->setStretchLastSection(true);
471  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
472
473  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
474  _cmbUseGlonass     = new QCheckBox();
475  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
476
477  _cmbSamplSpinBox = new QSpinBox;
478  _cmbSamplSpinBox->setMinimum(10);
479  _cmbSamplSpinBox->setMaximum(60);
480  _cmbSamplSpinBox->setSingleStep(10);
481  _cmbSamplSpinBox->setMaximumWidth(9*ww);
482  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
483  _cmbSamplSpinBox->setSuffix(" sec");
484
485  QPushButton* addCmbRowButton = new QPushButton("Add Row");
486  QPushButton* delCmbRowButton = new QPushButton("Delete");
487
488  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
489          SLOT(slotBncTextChanged()));
490
491  _cmbMethodComboBox = new QComboBox();
492  _cmbMethodComboBox->setEditable(false);
493  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
494  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
495  if (im != -1) {
496    _cmbMethodComboBox->setCurrentIndex(im);
497  }
498
499  int iRow = _cmbTable->rowCount();
500  if (iRow > 0) {
501    enableWidget(true, _cmbMethodComboBox);
502    enableWidget(true, _cmbMaxresLineEdit);
503    enableWidget(true, _cmbSamplSpinBox);
504    enableWidget(true, _cmbUseGlonass);
505  }
506  else {
507    enableWidget(false, _cmbMethodComboBox);
508    enableWidget(false, _cmbMaxresLineEdit);
509    enableWidget(false, _cmbSamplSpinBox);
510    enableWidget(false, _cmbUseGlonass);
511  }
512
513  // Upload Results
514  // -------------
515  _uploadTable = new QTableWidget(0,12);
516  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
517  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
518  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
519  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
520  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
521  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
522  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
523  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
524  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
525  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
526  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
527  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
528  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
529  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
530  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
531#if QT_VERSION < 0x050000
532  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
533#else
534  _uploadTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
535#endif
536  _uploadTable->horizontalHeader()->setStretchLastSection(true);
537  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
538
539  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
540          SLOT(slotBncTextChanged()));
541
542  QPushButton* addUploadRowButton = new QPushButton("Add Row");
543  QPushButton* delUploadRowButton = new QPushButton("Del Row");
544  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
545  _uploadIntrComboBox = new QComboBox;
546  _uploadIntrComboBox->setEditable(false);
547  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
548  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
549  if (ii != -1) {
550    _uploadIntrComboBox->setCurrentIndex(ii);
551  }
552
553  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
554  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
555
556  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
557  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
558  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
559  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
560  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
561  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
562  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
563
564  _uploadSamplSp3SpinBox = new QSpinBox;
565  _uploadSamplSp3SpinBox->setMinimum(0);
566  _uploadSamplSp3SpinBox->setMaximum(15);
567  _uploadSamplSp3SpinBox->setSingleStep(1);
568  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
569  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
570  _uploadSamplSp3SpinBox->setSuffix(" min");
571
572  _uploadSamplClkRnxSpinBox = new QSpinBox;
573  _uploadSamplClkRnxSpinBox->setMinimum(0);
574  _uploadSamplClkRnxSpinBox->setMaximum(60);
575  _uploadSamplClkRnxSpinBox->setSingleStep(5);
576  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
577  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
578  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
579
580  int iRowT = _uploadTable->rowCount();
581  if (iRowT > 0) {
582    enableWidget(true, _uploadIntrComboBox);
583    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
584    enableWidget(true, _uploadSamplSp3SpinBox);
585    enableWidget(true, _uploadSamplClkRnxSpinBox);
586    enableWidget(true, _uploadAntexFile);
587  }
588  else {
589    enableWidget(false, _uploadIntrComboBox);
590    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
591    enableWidget(false, _uploadSamplSp3SpinBox);
592    enableWidget(false, _uploadSamplClkRnxSpinBox);
593    enableWidget(false, _uploadAntexFile);
594  }
595
596  // Upload RTCM3 Ephemeris
597  // ----------------------
598  _uploadEphTable = new QTableWidget(0,6);
599  _uploadEphTable->setColumnCount(6);
600  _uploadEphTable->setRowCount(0);
601  _uploadEphTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, bytes").split(","));
602  _uploadEphTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
603  _uploadEphTable->setSelectionBehavior(QAbstractItemView::SelectRows);
604  _uploadEphTable->horizontalHeader()->resizeSection( 0,13*ww);
605  _uploadEphTable->horizontalHeader()->resizeSection( 1, 5*ww);
606  _uploadEphTable->horizontalHeader()->resizeSection( 2, 8*ww);
607  _uploadEphTable->horizontalHeader()->resizeSection( 3, 8*ww);
608  _uploadEphTable->horizontalHeader()->resizeSection( 4,10*ww);
609  _uploadEphTable->horizontalHeader()->resizeSection( 5,12*ww);
610#if QT_VERSION < 0x050000
611  _uploadEphTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
612#else
613  _uploadEphTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
614#endif
615  _uploadEphTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
616
617  connect(_uploadEphTable, SIGNAL(itemSelectionChanged()),
618          SLOT(slotBncTextChanged()));
619
620  QPushButton* addUploadEphRowButton = new QPushButton("Add Row");
621  addUploadEphRowButton->setMaximumWidth(9*ww);
622  QPushButton* delUploadEphRowButton = new QPushButton("Del Row");
623  delUploadEphRowButton->setMaximumWidth(9*ww);
624
625  _uploadSamplRtcmEphSpinBox = new QSpinBox;
626  _uploadSamplRtcmEphSpinBox->setMinimum(0);
627  _uploadSamplRtcmEphSpinBox->setMaximum(60);
628  _uploadSamplRtcmEphSpinBox->setSingleStep(5);
629  _uploadSamplRtcmEphSpinBox->setMaximumWidth(9*ww);
630  _uploadSamplRtcmEphSpinBox->setValue(settings.value("uploadSamplRtcmEph").toInt());
631  _uploadSamplRtcmEphSpinBox->setSuffix(" sec");
632
633  iRowT = _uploadEphTable->rowCount();
634  if (iRowT > 0) {
635    enableWidget(true, _uploadSamplRtcmEphSpinBox);
636  }
637  else {
638    enableWidget(false, _uploadSamplRtcmEphSpinBox);
639  }
640
641  // Canvas with Editable Fields
642  // ---------------------------
643  _canvas = new QWidget;
644  setCentralWidget(_canvas);
645
646  _aogroup = new QTabWidget();
647  _aogroup->setElideMode(Qt::ElideNone);
648  _aogroup->setUsesScrollButtons(true);
649  QWidget* pgroup = new QWidget();
650  QWidget* ggroup = new QWidget();
651  QWidget* sgroup = new QWidget();
652  QWidget* egroup = new QWidget();
653  QWidget* agroup = new QWidget();
654  QWidget* cgroup = new QWidget();
655  QWidget* ogroup = new QWidget();
656  QWidget* rgroup = new QWidget();
657  QWidget* sergroup = new QWidget();
658  QWidget* pppGroup1 = new QWidget();
659  QWidget* pppGroup2 = new QWidget();
660  QWidget* pppGroup3 = new QWidget();
661  QWidget* pppGroup4 = new QWidget();
662  QWidget* reqcgroup = new QWidget();
663  QWidget* sp3CompGroup = new QWidget();
664  QWidget* cmbgroup = new QWidget();
665  QWidget* uploadgroup = new QWidget();
666  QWidget* uploadEphgroup = new QWidget();
667  _aogroup->addTab(pgroup,tr("Network"));
668  _aogroup->addTab(ggroup,tr("General"));
669  _aogroup->addTab(ogroup,tr("RINEX Observations"));
670  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
671  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
672  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
673  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
674  _aogroup->addTab(sgroup,tr("Feed Engine"));
675  _aogroup->addTab(sergroup,tr("Serial Output"));
676  _aogroup->addTab(agroup,tr("Outages"));
677  _aogroup->addTab(rgroup,tr("Miscellaneous"));
678  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
679  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
680  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
681  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
682  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
683  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
684  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
685
686  // Log Tab
687  // -------
688  _loggroup = new QTabWidget();
689  _loggroup->addTab(_log,tr("Log"));
690  _loggroup->addTab(_bncFigure,tr("Throughput"));
691  _loggroup->addTab(_bncFigureLate,tr("Latency"));
692  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
693
694  // Netowork (Proxy and SSL) Tab
695  // ----------------------------
696  QGridLayout* pLayout = new QGridLayout;
697  pLayout->setColumnMinimumWidth(0,13*ww);
698  _proxyPortLineEdit->setMaximumWidth(9*ww);
699
700  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
701  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
702  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
703  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
704  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
705  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
706  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
707  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
708  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
709  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
710  pLayout->addWidget(new QLabel(""),                                         5, 1);
711  pLayout->setRowStretch(6, 999);
712
713  pgroup->setLayout(pLayout);
714
715  // General Tab
716  // -----------
717  QGridLayout* gLayout = new QGridLayout;
718  gLayout->setColumnMinimumWidth(0,14*ww);
719  _onTheFlyComboBox->setMaximumWidth(9*ww);
720
721  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
722  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
723  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
724  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
725  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
726  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
727  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
728  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
729  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
730  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
731  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
732  gLayout->addWidget(new QLabel(""),                             6, 1);
733  gLayout->setRowStretch(7, 999);
734
735  ggroup->setLayout(gLayout);
736
737  // RINEX Observations
738  // ------------------
739  QGridLayout* oLayout = new QGridLayout;
740  oLayout->setColumnMinimumWidth(0,14*ww);
741  _rnxIntrComboBox->setMaximumWidth(9*ww);
742  _rnxSamplSpinBox->setMaximumWidth(9*ww);
743
744  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
745  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
746  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
747  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
748  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
749  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
750  oLayout->addWidget(_rnxSamplSpinBox,                             2, 3, Qt::AlignLeft);
751  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
752  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
753  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
754  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
755  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
756  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
757  oLayout->addWidget(new QLabel("Version 2 signal priority"),      5, 0);
758  oLayout->addWidget(_rnxV2Priority,                               5, 1, 1, 15);
759  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
760  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
761  oLayout->addWidget(new QLabel("Version 3 filenames"),            6, 2);
762  oLayout->addWidget(_rnxV3filenameCheckBox,                       6, 3);
763  oLayout->addWidget(new QLabel(""),                               7, 1);
764  oLayout->setRowStretch(8, 999);
765
766  ogroup->setLayout(oLayout);
767
768  // RINEX Ephemeris
769  // ---------------
770  QGridLayout* eLayout = new QGridLayout;
771  eLayout->setColumnMinimumWidth(0,14*ww);
772  _ephIntrComboBox->setMaximumWidth(9*ww);
773  _ephOutPortLineEdit->setMaximumWidth(9*ww);
774
775  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
776  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
777  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
778  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
779  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
780  eLayout->addWidget(new QLabel("Port"),                          3, 0);
781  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
782  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
783  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
784  eLayout->addWidget(new QLabel("Version 3 filenames"),           4, 2);
785  eLayout->addWidget(_ephV3filenameCheckBox,                      4, 3);
786  eLayout->setRowStretch(5, 999);
787
788  egroup->setLayout(eLayout);
789
790
791  // Broadcast Corrections
792  // ---------------------
793  QGridLayout* cLayout = new QGridLayout;
794  cLayout->setColumnMinimumWidth(0,14*ww);
795  _corrIntrComboBox->setMaximumWidth(9*ww);
796  _corrPortLineEdit->setMaximumWidth(9*ww);
797
798  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
799  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
800  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
801  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
802  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
803  cLayout->addWidget(new QLabel("Port"),                          3, 0);
804  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
805  cLayout->addWidget(new QLabel(""),                              4, 1);
806  cLayout->setRowStretch(7, 999);
807  cgroup->setLayout(cLayout);
808
809  // Feed Engine
810  // -----------
811  QGridLayout* sLayout = new QGridLayout;
812  sLayout->setColumnMinimumWidth(0,14*ww);
813  _outPortLineEdit->setMaximumWidth(9*ww);
814  _outWaitSpinBox->setMaximumWidth(9*ww);
815  _outSamplSpinBox->setMaximumWidth(9*ww);
816  _outUPortLineEdit->setMaximumWidth(9*ww);
817
818  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
819  sLayout->addWidget(new QLabel("Port"),                            1, 0);
820  sLayout->addWidget(_outPortLineEdit,                              1, 1);
821  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
822  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
823  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
824  sLayout->addWidget(_outSamplSpinBox,                              2, 1, Qt::AlignLeft);
825  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
826  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
827  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
828  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
829  sLayout->addWidget(new QLabel(""),                                5, 1);
830  sLayout->setRowStretch(6, 999);
831
832  sgroup->setLayout(sLayout);
833
834  // Serial Output
835  // -------------
836  QGridLayout* serLayout = new QGridLayout;
837  serLayout->setColumnMinimumWidth(0,12*ww);
838  _serialBaudRateComboBox->setMaximumWidth(9*ww);
839  _serialFlowControlComboBox->setMaximumWidth(11*ww);
840  _serialDataBitsComboBox->setMaximumWidth(5*ww);
841  _serialParityComboBox->setMaximumWidth(9*ww);
842  _serialStopBitsComboBox->setMaximumWidth(5*ww);
843  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
844  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
845  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
846
847  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
848  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
849  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
850  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
851  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
852  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
853  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
854  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
855  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
856  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
857  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
858  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
859  serLayout->addWidget(_serialParityComboBox,                     4, 3);
860  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
861  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
862  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
863  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
864  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
865  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
866  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
867  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
868  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
869  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
870  serLayout->addWidget(new QLabel(""),                            6, 1);
871  serLayout->setRowStretch(7, 999);
872
873  sergroup->setLayout(serLayout);
874
875  // Outages
876  // -------
877  QGridLayout* aLayout = new QGridLayout;
878  aLayout->setColumnMinimumWidth(0,14*ww);
879  _adviseObsRateComboBox->setMaximumWidth(9*ww);
880  _adviseFailSpinBox->setMaximumWidth(9*ww);
881  _adviseRecoSpinBox->setMaximumWidth(9*ww);
882
883  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
884  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
885  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
886  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
887  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
888  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
889  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
890  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
891  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
892  aLayout->addWidget(new QLabel(""),                              5, 1);
893  aLayout->setRowStretch(6, 999);
894
895  agroup->setLayout(aLayout);
896
897  // Miscellaneous
898  // -------------
899  QGridLayout* rLayout = new QGridLayout;
900  rLayout->setColumnMinimumWidth(0,14*ww);
901  _miscIntrComboBox->setMaximumWidth(9*ww);
902  _miscPortLineEdit->setMaximumWidth(9*ww);
903
904  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
905  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
906  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
907  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
908  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
909  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
910  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
911  rLayout->addWidget(new QLabel("Port"),                          4, 0);
912  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
913  rLayout->addWidget(new QLabel(""),                              5, 1);
914  rLayout->setRowStretch(6, 999);
915
916  rgroup->setLayout(rLayout);
917
918  // PPP
919  // ---
920  _pppWidgets._dataSource->setMaximumWidth(15*ww);
921  _pppWidgets._corrMount->setMaximumWidth(15*ww);
922  _pppWidgets._nmeaPath->setMaximumWidth(35*ww);
923  _pppWidgets._logPath->setMaximumWidth(35*ww);
924  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
925  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
926  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
927  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
928
929  QGridLayout* pppLayout1 = new QGridLayout();
930  int ir = 0;
931  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output.<br>"), ir, 0, 1, 7, Qt::AlignLeft);
932  ++ir;
933  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
934  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
935  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 4);
936  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 5, 1, 3);
937  ++ir;
938  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
939  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
940  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 2);
941  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 3);
942  pppLayout1->addWidget(new QLabel("   Logfile directory"),  ir, 4);
943  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 5, 1, 3);
944  ++ir;
945  pppLayout1->addWidget(new QLabel("RINEX Obs file"),        ir, 0);
946  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 1);
947  pppLayout1->addWidget(new QLabel("RINEX Nav file"),        ir, 2);
948  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 3);
949  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 4);
950  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 5, 1, 3);
951  ++ir;
952  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
953  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
954  pppLayout1->addWidget(new QLabel("ANTEX file"),            ir, 2);
955  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 3);
956  pppLayout1->addWidget(new QLabel("   SNX TRO directory"),  ir, 4);
957  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 5, 1, 3);
958  ++ir;
959#ifdef USE_PPP
960  pppLayout1->addWidget(new QLabel("BLQ file"),              ir, 0);
961  pppLayout1->addWidget(_pppWidgets._blqFile,                ir, 1);
962#endif
963  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 4);
964  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 5);
965  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 6);
966  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 7, Qt::AlignRight);
967  ++ir;
968  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 4);
969  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 5);
970  pppLayout1->addWidget(new QLabel("   SNX TRO solution"),   ir, 6);
971  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 7, Qt::AlignRight);
972  pppLayout1->setRowStretch(ir+1, 999);
973  pppGroup1->setLayout(pppLayout1);
974
975  QVBoxLayout* pppLayout2 = new QVBoxLayout();
976  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
977  pppLayout2->addWidget(_pppWidgets._staTable, 99);
978  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
979  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
980  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
981  pppLayout2sub->addStretch(99);
982
983  pppLayout2->addLayout(pppLayout2sub);
984
985  pppGroup2->setLayout(pppLayout2);
986
987  QGridLayout* pppLayout3 = new QGridLayout();
988  ir = 0;
989  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
990  ++ir;
991  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
992  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
993  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
994  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
995  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
996  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
997  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
998  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
999  ++ir;
1000  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
1001  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
1002  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
1003  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
1004  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
1005  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
1006  ++ir;
1007  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
1008  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
1009  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
1010  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
1011  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
1012  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
1013  ++ir;
1014  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
1015  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
1016  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
1017  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
1018  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
1019  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
1020  ++ir;
1021  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
1022  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
1023  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
1024  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
1025  ++ir;
1026  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
1027  pppLayout3->setColumnStretch(8, 999);
1028  ++ir;
1029  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
1030  pppLayout3->setRowStretch(ir, 999);
1031
1032  pppGroup3->setLayout(pppLayout3);
1033
1034  // ------------------------
1035  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1036  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
1037  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
1038
1039  QGridLayout* pppLayout4 = new QGridLayout();
1040  ir = 0;
1041  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
1042  ++ir;
1043  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
1044  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
1045  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
1046  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
1047  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
1048
1049  ++ir;
1050  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
1051  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
1052  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
1053  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
1054  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
1055  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
1056  ++ir;
1057  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
1058  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
1059  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
1060  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
1061  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
1062  ++ir;
1063  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
1064  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
1065  ++ir;
1066  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
1067  pppLayout4->setRowStretch(ir, 999);
1068
1069  pppGroup4->setLayout(pppLayout4);
1070
1071  // Reqc Processing
1072  // ---------------
1073  _reqcActionComboBox = new QComboBox();
1074  _reqcActionComboBox->setEditable(false);
1075  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1076  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1077  if (ik != -1) {
1078    _reqcActionComboBox->setCurrentIndex(ik);
1079  }
1080  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1081          this, SLOT(slotBncTextChanged()));
1082
1083  QGridLayout* reqcLayout = new QGridLayout;
1084  _reqcActionComboBox->setMinimumWidth(15*ww);
1085  _reqcActionComboBox->setMaximumWidth(20*ww);
1086
1087  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1088  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1089
1090  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1091  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1092  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1093  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1094  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1095  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1096  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1097
1098  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1099          this, SLOT(slotBncTextChanged()));
1100
1101  _reqcLogSummaryOnly = new QCheckBox();
1102  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1103
1104  ir = 0;
1105  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1106  ++ir;
1107  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1108  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1109  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1110  _reqcEditOptionButton->setMinimumWidth(15*ww);
1111  _reqcEditOptionButton->setMaximumWidth(20*ww);
1112
1113  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1114  ++ir;
1115  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1116  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1117  _reqcObsFileChooser->setMaximumWidth(40*ww);
1118  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1119  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1120  _reqcNavFileChooser->setMaximumWidth(40*ww);
1121  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1122  ++ir;
1123  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1124  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1125  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1126  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1127  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1128  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1129  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1130  ++ir;
1131  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1132  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1133  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1134  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1135  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1136  ++ir;
1137  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1138  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1139  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1140  ++ir;
1141  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1142  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1143  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1144  ++ir;
1145  reqcLayout->setRowStretch(ir, 999);
1146
1147  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1148  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1149
1150  reqcgroup->setLayout(reqcLayout);
1151
1152  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1153          this, SLOT(slotReqcEditOption()));
1154
1155  QGridLayout* sp3CompLayout = new QGridLayout;
1156
1157  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1158  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1159  _sp3CompFileChooser->setMinimumWidth(15*ww);
1160  _sp3CompFileChooser->setMaximumWidth(40*ww);
1161
1162  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1163  _sp3CompExclude->setMinimumWidth(18*ww);
1164  _sp3CompExclude->setMaximumWidth(18*ww);
1165
1166  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1167  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1168  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1169
1170  ir = 0;
1171  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1172  ++ir;
1173  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1174  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1175  ++ir;
1176  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1177  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1178  ++ir;
1179  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1180  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1181  ++ir;
1182  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1183  ++ir;
1184  sp3CompLayout->setRowStretch(ir, 999);
1185
1186  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1187  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1188
1189  sp3CompGroup->setLayout(sp3CompLayout);
1190
1191  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1192          this, SLOT(slotBncTextChanged()));
1193
1194  // Combine Corrections
1195  // -------------------
1196  QGridLayout* cmbLayout = new QGridLayout;
1197
1198  populateCmbTable();
1199  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1200  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1201  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1202  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1203  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1204  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1205  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1206  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1207  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1208  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1209  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1210  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1211  cmbLayout->setRowStretch(7, 999);
1212
1213  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1214  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1215
1216  cmbgroup->setLayout(cmbLayout);
1217
1218  // Upload Layout (Clocks)
1219  // ----------------------
1220  QGridLayout* uploadHlpLayout = new QGridLayout();
1221
1222  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1223  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1224  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1225
1226  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1227  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1228  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1229  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1230  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1231  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1232  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1233  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1234  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1235  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1236  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1237  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1238  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1239
1240  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1241  populateUploadTable();
1242
1243  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1244  uploadLayout->addWidget(_uploadTable);
1245  uploadLayout->addLayout(uploadHlpLayout);
1246
1247  uploadgroup->setLayout(uploadLayout);
1248
1249  // Upload Layout (Ephemeris)
1250  // -------------------------
1251  QGridLayout* uploadHlpLayoutEph = new QGridLayout();
1252
1253  connect(addUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadEphRow()));
1254  connect(delUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadEphRow()));
1255
1256  uploadHlpLayoutEph->addWidget(addUploadEphRowButton,               0, 0);
1257  uploadHlpLayoutEph->addWidget(delUploadEphRowButton,               0, 1);
1258  uploadHlpLayoutEph->addWidget(new QLabel("     Sampling"),         0, 2, Qt::AlignRight);
1259  uploadHlpLayoutEph->addWidget(_uploadSamplRtcmEphSpinBox,          0, 3);
1260
1261  QBoxLayout* uploadLayoutEph = new QBoxLayout(QBoxLayout::TopToBottom);
1262  populateUploadEphTable();
1263
1264  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"));
1265  uploadLayoutEph->addWidget(_uploadEphTable);
1266  uploadLayoutEph->addLayout(uploadHlpLayoutEph);
1267
1268  uploadEphgroup->setLayout(uploadLayoutEph);
1269
1270
1271  // Main Layout
1272  // -----------
1273  QGridLayout* mLayout = new QGridLayout;
1274  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1275  mLayout->addWidget(_aogroup,            0,0);
1276  mLayout->addWidget(_mountPointsTable,   1,0);
1277  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1278  mLayout->addWidget(_loggroup,           2,0);
1279
1280  _canvas->setLayout(mLayout);
1281
1282  // WhatsThis, Network
1283  // ------------------
1284  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet. <i>[key: proxyHost]</i></p>"));
1285  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC. <i>[key: proxyPort]</i></p>"));
1286  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443. <i>[key: sslCaCertPath]</i></p>"));
1287  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this. <i>[key: sslIgnoreErrors]</i></p>"));
1288
1289  // WhatsThis, General
1290  // ------------------
1291  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date. <i>[key: logFile]</i></p>"));
1292  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far. <i>[key: rnxAppend]</i></p>"));
1293  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals. The default entry is 'no' that means the reread function is switched of. <p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'. <i>[key: onTheFlyInterval]</i></p>"));
1294  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options. <i>[key: autoStart]</i></p>"));
1295  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes. <i>[key: rawOutFile]</i></p>"));
1296
1297  // WhatsThis, RINEX Observations
1298  // -----------------------------
1299  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files. <i>[key: rnxPath]</i></p>"));
1300  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file. <i>[key: rnxIntr]</i></p>"));
1301  _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files. <i>[key: rnxSampl]</i></p>"));
1302  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. <i>[key: rnxSkel]</i></p>"));
1303  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types. <i>[key: rnxOnlyWithSKL]</i></p>"));
1304  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems). <i>[key: rnxScript]</i></p>"));
1305  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'C:IQX I:ABCX' (System specific signal priorities for BDS and IRNSS) </li><li>'G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_'. <i>[key: rnxV2Priority]</i></p>"));
1306  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format. <i>[key: rnxV3]</i></p>"));
1307  _rnxV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format. <i>[key: rnxV3filenames]</i></p>"));
1308
1309  // WhatsThis, RINEX Ephemeris
1310  // --------------------------
1311  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files. <i>[key: ephPath]</i></p>"));
1312  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file. <i>[key: ephIntr]</i></p>"));
1313  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: ephOutPort]</i></p>"));
1314  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format. <i>[key: ephV3]</i></p>"));
1315  _ephV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format. <i>[key: ephV3filenames]</i></p>"));
1316
1317  // WhatsThis, RINEX Editing & QC
1318  // -----------------------------
1319  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program. <i>[key: reqcAction]</i></p>"));
1320  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1321  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory. <i>[key: reqcObsFile]</i></p>"));
1322  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory. <i>[key: reqcNavFile]</i></p>"));
1323  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced. <i>[key: reqcOutObsFile]</i></p>"));
1324  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced. <i>[key: reqcOutNavFile]</i></p>"));
1325  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced. <i>[key: reqcOutLogFile]</i></p>"));
1326  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information. <i>[key: reqcLogSummaryOnly]</i></p>"));
1327  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk. <i>[key: reqcPlotDir]</i></p>"));
1328  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default. <i>[key: reqcSkyPlotSignals]</i></p>"));
1329
1330  // WhatsThis, SP3 Comparison
1331  // -------------------------
1332  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma. <i>[key: sp3CompFile]</i></p>"));
1333  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison. <i>[key: sp3CompExclude]</i></p>"));
1334  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless. <i>[key: sp3CompOutLogFile]</i></p>"));
1335
1336  // WhatsThis, Broadcast Corrections
1337  // --------------------------------
1338  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files. <i>[key: corrPath]</i></p>"));
1339  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files. <i>[key: corrIntr]</i></p>"));
1340  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: corrPort]</i></p>"));
1341
1342  // WhatsThis, Feed Engine
1343  // ----------------------
1344  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outPort]</i></p>"));
1345  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product. <i>[key: outWait]</i></p>"));
1346  _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs. <i>[key: outSampl]</i></p>"));
1347  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams. <i>[key: outFile]</i></p>"));
1348  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outUPort]</i></p>"));
1349
1350  // WhatsThis, Serial Output
1351  // ------------------------
1352  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware. <i>[key: serialMountPoint]</i></p>"));
1353  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here. <i>[key: serialPortName]</i></p>"));
1354  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended. <i>[key: serialBaudRate]</i></p>"));
1355  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better. <i>[key: serialFlowControl]</i></p>"));
1356  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used. <i>[key: serialDataBits]</i></p>"));
1357  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'. <i>[key: serialParity]</i></p>"));
1358  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used. <i>[key: serialStopBits]</i></p>"));
1359  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file. <i>[key: serialAutoNMEA]</i></p>"));
1360  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk. <i>[key: serialFileNMEA]</i></p>"));
1361  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively. <i>[key: serialHeightNMEA]</i></p>"));
1362  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals. <i>[key: serialManualNMEASampling]</i></p>"));
1363
1364  // WhatsThis, Outages
1365  // ------------------
1366  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span. <i>[key: adviseObsRate]</i></p>"));
1367  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note. <i>[key: adviseFail]</i></p>"));
1368  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note. <i>[key: adviseReco]</i></p>"));
1369  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option. <i>[key: adviseScript]</i></p>"));
1370
1371  // WhatsThis, Miscellaneous
1372  // ------------------------
1373  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options. <i>[key: miscMount]</i></p>"));
1374  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information. <i>[key: miscIntr]</i></p>"));
1375  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types. <i>[key: miscScanRTCM]</i></p>"));
1376  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function. <i>[key: miscPort]</i></p>"));
1377
1378  // WhatsThis, PPP (1)
1379  // ------------------
1380  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations. <i>[key: PPP/dataSource]</i></p>"));
1381  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file. <i>[key: PPP/rinexObs]</i></p>"));
1382  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file. <i>[key: PPP/rinexNav]</i></p>"));
1383  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP. <i>[key: PPP/corrMount]</i></p>"));
1384  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP. <i>[key: PPP/corrFile]</i></p>"));
1385  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations. <i>[key: PPP/antexFile]</i></p>"));
1386  _pppWidgets._blqFile->setWhatsThis(tr("<p>Enter the full path to an ocean loading file in BLQ format. It contains a record for each site, which shows a header with information on the ocean tide model, the site name and the geographic coordinates. The first three rows of numbers designate amplitudes (meter), radial, west, south, and are followed by three lines with the corresponding phase values (degrees). <i>[key: PPP/blqFile]</i></p>"));
1387  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored. <i>[key: PPP/crdFile]</i></p>"));
1388  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames. <i>[key: PPP/v3filenames]</i></p>"));
1389  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced. <i>[key: PPP/logPath]</i></p>"));
1390  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced. <i>[key: PPP/nmeaPath]</i></p>"));
1391  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced. <i>[key: PPP/snxtroPath]</i></p>"));
1392  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'. <i>[key: PPP/snxtroIntr]</i></p>"));
1393  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk. <i>[key: PPP/snxtroSampl]</i></p>"));
1394  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files. <i>[key: PPP/snxtroAc]</i></p>"));
1395  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC. <i>[key: PPP/snxtroSol]</i></p>"));
1396
1397  // WhatsThis, PPP (3)
1398  // ------------------
1399  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data. <i>[key: PPP/lcGPS]</i></p>"));
1400  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data. <i>[key: PPP/lcGLONASS]</i></p>"));
1401  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data. <i>[key: PPP/lcGalileo]</i></p>"));
1402  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data. <i>[key: PPP/lcBDS]</i></p>"));
1403  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0' <i>[key: PPP/sigmaC1]</i></p>"));
1404  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01' <i>[key: PPP/sigmaL1]</i></p>"));
1405  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0' <i>[key: PPP/maxResC1]</i></p>"));
1406  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03' <i>[key: PPP/maxResL1]</i></p>"));
1407  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution. <i>[key: PPP/eleWgtCode]</i></p>"));
1408  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution. <i>[key: PPP/eleWgtPhase]</i></p>"));
1409  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum. <i>[key: PPP/minObs]</i></p>"));
1410  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations. <i>[key: PPP/minEle]</i></p>"));
1411
1412  // WhatsThis, Combine Corrections
1413  // ------------------------------
1414  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format. <i>[key: cmbStreams]</i></p>"));
1415  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1416  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1417  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning. <i>[key: cmbMethod]</i></p>"));
1418  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'. <i>[key: cmbMaxres]</i></p>"));
1419  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice. <i>[key: cmbSampl]</i></p>"));
1420  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination. <i>[key: cmbUseGlonass]</i></p>"));
1421
1422  // WhatsThis, Upload Corrections
1423  // -----------------------------
1424  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table. <i>[key: uploadMountpointsOut]</i></p>"));
1425  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1426  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Corrections' table.</p>"));
1427  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files. <i>[key: uploadIntr]</i></p>"));
1428  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages. <i>[key: uploadSamplRtcmEphCorr]</i></p>"));
1429  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files. <i>[key: uploadSamplSp3]</i></p>"));
1430  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files. <i>[key: uploadSamplClkRnx]</i></p>"));
1431  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1432  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs. <i>[key: uploadAntexFile]</i></p>"));
1433
1434  // WhatsThis, Upload Ephemeris
1435  // ---------------------------
1436  _uploadEphTable->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the respective stream. <i>[key: uploadEphHost]</i></p>"));
1437  addUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Ephemeris' table.</p>"));
1438  delUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Ephemeris' table.</p>"));
1439  _uploadSamplRtcmEphSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds. <i>[key: uploadSamplRtcmEph]</i></p>"));
1440
1441  // WhatsThis, Streams Canvas
1442  // -------------------------
1443  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. <i>[key: mountPoints]</i></p>"));
1444  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1445  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1446  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1447  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1448  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1449
1450  // WhatsThis, Log Canvas
1451  // ---------------------
1452  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1453  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1454  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1455  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1456
1457
1458  // Enable/Disable all Widgets
1459  // --------------------------
1460  slotBncTextChanged();
1461  enableStartStop();
1462
1463  // Auto start
1464  // ----------
1465  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1466    slotStart();
1467  }
1468}
1469
1470// Destructor
1471////////////////////////////////////////////////////////////////////////////
1472bncWindow::~bncWindow() {
1473  if (_caster) {
1474    delete _caster; BNC_CORE->setCaster(0);
1475  }
1476  if (_casterEph) {
1477    delete _casterEph;
1478  }
1479  delete _bncFigureLate;
1480  delete _bncFigurePPP;
1481  delete _actHelp;
1482  delete _actAbout;
1483  delete _actFlowchart;
1484  delete _actFontSel;
1485  delete _actSaveOpt;
1486  delete _actQuit;
1487  delete _actAddMountPoints;
1488  delete _actDeleteMountPoints;
1489  delete _actMapMountPoints;
1490  delete _actStart;
1491  delete _actStop;
1492  delete _actwhatsthis;
1493  delete _proxyHostLineEdit;
1494  delete _proxyPortLineEdit;
1495  delete _sslCaCertPathLineEdit;
1496  delete _sslIgnoreErrorsCheckBox;
1497  delete _logFileLineEdit;
1498  delete _rawOutFileLineEdit;
1499  delete _rnxAppendCheckBox;
1500  delete _onTheFlyComboBox;
1501  delete _autoStartCheckBox;
1502  delete _rnxPathLineEdit;
1503  delete _rnxIntrComboBox;
1504  delete _rnxSamplSpinBox;
1505  delete _rnxFileCheckBox;
1506  delete _rnxSkelLineEdit;
1507  delete _rnxScrpLineEdit;
1508  delete _rnxV3CheckBox;
1509  delete _rnxV3filenameCheckBox;
1510  delete _rnxV2Priority;
1511  delete _ephPathLineEdit;
1512  delete _ephIntrComboBox;
1513  delete _ephOutPortLineEdit;
1514  delete _ephV3CheckBox;
1515  delete _ephV3filenameCheckBox;
1516  delete _corrPathLineEdit;
1517  delete _corrIntrComboBox;
1518  delete _corrPortLineEdit;
1519  delete _outPortLineEdit;
1520  delete _outWaitSpinBox;
1521  delete _outSamplSpinBox;
1522  delete _outFileLineEdit;
1523  delete _outUPortLineEdit;
1524  delete _serialMountPointLineEdit;
1525  delete _serialPortNameLineEdit;
1526  delete _serialBaudRateComboBox;
1527  delete _serialFlowControlComboBox;
1528  delete _serialDataBitsComboBox;
1529  delete _serialParityComboBox;
1530  delete _serialStopBitsComboBox;
1531  delete _serialAutoNMEAComboBox;
1532  delete _serialFileNMEALineEdit;
1533  delete _serialHeightNMEALineEdit;
1534  delete _serialManualNMEASamplingSpinBox;
1535  delete _adviseObsRateComboBox;
1536  delete _adviseFailSpinBox;
1537  delete _adviseRecoSpinBox;
1538  delete _adviseScriptLineEdit;
1539  delete _miscMountLineEdit;
1540  delete _miscPortLineEdit;
1541  delete _miscIntrComboBox;
1542  delete _miscScanRTCMCheckBox;
1543  _mountPointsTable->deleteLater();
1544  delete _log;
1545  delete _loggroup;
1546  _cmbTable->deleteLater();
1547  delete _cmbMaxresLineEdit;
1548  delete _cmbUseGlonass;
1549  delete _cmbSamplSpinBox;
1550  delete _cmbMethodComboBox;;
1551  _uploadEphTable->deleteLater();
1552  delete _uploadSamplRtcmEphCorrSpinBox;
1553  _uploadTable->deleteLater();
1554  delete _uploadIntrComboBox;
1555  delete _uploadAntexFile;
1556  delete _uploadSamplRtcmEphSpinBox;
1557  delete _uploadSamplSp3SpinBox;
1558  delete _uploadSamplClkRnxSpinBox;
1559  delete _reqcActionComboBox;
1560  delete _reqcObsFileChooser;
1561  delete _reqcNavFileChooser;
1562  delete _reqcOutObsLineEdit;
1563  delete _reqcOutNavLineEdit;
1564  delete _reqcOutLogLineEdit;
1565  delete _reqcPlotDirLineEdit;
1566  delete _reqcSkyPlotSignals;
1567  delete _reqcLogSummaryOnly;
1568  delete _reqcEditOptionButton;
1569  delete _sp3CompFileChooser;
1570  delete _sp3CompExclude;
1571  delete _sp3CompLogLineEdit;
1572  //delete _canvas;
1573}
1574
1575//
1576////////////////////////////////////////////////////////////////////////////
1577void bncWindow::populateMountPointsTable() {
1578
1579  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1580    _mountPointsTable->removeRow(iRow);
1581  }
1582
1583  bncSettings settings;
1584
1585  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1586  int iRow = 0;
1587  while (it.hasNext()) {
1588    QStringList hlp = it.next().split(" ");
1589    if (hlp.size() < 7) continue;
1590    _mountPointsTable->insertRow(iRow);
1591
1592    QUrl    url(hlp[0]);
1593
1594    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1595    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1596    QString nmea(hlp[5]);
1597    if (hlp[6] == "S") {
1598      fullPath = hlp[0].replace(0,2,"");
1599    }
1600    QString ntripVersion = "2";
1601    if (hlp.size() >= 7) {
1602      ntripVersion = (hlp[6]);
1603    }
1604
1605    QTableWidgetItem* it;
1606    it = new QTableWidgetItem(url.userInfo());
1607    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1608    _mountPointsTable->setItem(iRow, 0, it);
1609
1610    it = new QTableWidgetItem(fullPath);
1611    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1612    _mountPointsTable->setItem(iRow, 1, it);
1613
1614    it = new QTableWidgetItem(format);
1615    _mountPointsTable->setItem(iRow, 2, it);
1616
1617    it = new QTableWidgetItem(country);
1618    _mountPointsTable->setItem(iRow, 3, it);
1619
1620    if      (nmea == "yes") {
1621      it = new QTableWidgetItem(latitude);
1622      _mountPointsTable->setItem(iRow, 4, it);
1623      it = new QTableWidgetItem(longitude);
1624      _mountPointsTable->setItem(iRow, 5, it);
1625    } else {
1626      it = new QTableWidgetItem(latitude);
1627      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1628      _mountPointsTable->setItem(iRow, 4, it);
1629
1630      it = new QTableWidgetItem(longitude);
1631      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1632      _mountPointsTable->setItem(iRow, 5, it);
1633    }
1634
1635    it = new QTableWidgetItem(nmea);
1636    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1637    _mountPointsTable->setItem(iRow, 6, it);
1638
1639    it = new QTableWidgetItem(ntripVersion);
1640    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1641    _mountPointsTable->setItem(iRow, 7, it);
1642
1643    bncTableItem* bncIt = new bncTableItem();
1644    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1645    _mountPointsTable->setItem(iRow, 8, bncIt);
1646
1647    iRow++;
1648  }
1649
1650  _mountPointsTable->sortItems(1);
1651
1652  enableStartStop();
1653}
1654
1655// Retrieve Table
1656////////////////////////////////////////////////////////////////////////////
1657void bncWindow::slotAddMountPoints() {
1658
1659  bncSettings settings;
1660  QString proxyHost = settings.value("proxyHost").toString();
1661  int     proxyPort = settings.value("proxyPort").toInt();
1662  if (proxyHost != _proxyHostLineEdit->text()         ||
1663      proxyPort != _proxyPortLineEdit->text().toInt()) {
1664    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1665                                     "changed. Use the new ones?",
1666                                     QMessageBox::Yes, QMessageBox::No,
1667                                     QMessageBox::NoButton);
1668    if      (iRet == QMessageBox::Yes) {
1669      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1670      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1671    }
1672  }
1673
1674  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1675  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1676
1677  QMessageBox msgBox;
1678  msgBox.setIcon(QMessageBox::Question);
1679  msgBox.setWindowTitle("Add Stream");
1680  msgBox.setText("Add stream(s) coming from:");
1681
1682  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1683  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1684  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1685  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1686  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1687
1688  msgBox.exec();
1689
1690  if (msgBox.clickedButton() == buttonNtrip) {
1691    bncTableDlg* dlg = new bncTableDlg(this);
1692    dlg->move(this->pos().x()+50, this->pos().y()+50);
1693    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1694          this, SLOT(slotNewMountPoints(QStringList*)));
1695    dlg->exec();
1696    delete dlg;
1697  } else if (msgBox.clickedButton() == buttonIP) {
1698    bncIpPort* ipp = new bncIpPort(this);
1699    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1700          this, SLOT(slotNewMountPoints(QStringList*)));
1701    ipp->exec();
1702    delete ipp;
1703  } else if (msgBox.clickedButton() == buttonUDP) {
1704    bncUdpPort* udp = new bncUdpPort(this);
1705    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1706          this, SLOT(slotNewMountPoints(QStringList*)));
1707    udp->exec();
1708    delete udp;
1709  } else if (msgBox.clickedButton() == buttonSerial) {
1710    bncSerialPort* sep = new bncSerialPort(this);
1711    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1712          this, SLOT(slotNewMountPoints(QStringList*)));
1713    sep->exec();
1714    delete sep;
1715  } else if (msgBox.clickedButton() == buttonCancel) {
1716    // Cancel
1717  }
1718
1719  enableStartStop();
1720}
1721
1722// Delete Selected Mount Points
1723////////////////////////////////////////////////////////////////////////////
1724void bncWindow::slotDeleteMountPoints() {
1725
1726  int nRows = _mountPointsTable->rowCount();
1727  bool flg[nRows];
1728  for (int iRow = 0; iRow < nRows; iRow++) {
1729    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1730      flg[iRow] = true;
1731    }
1732    else {
1733      flg[iRow] = false;
1734    }
1735  }
1736  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1737    if (flg[iRow]) {
1738      _mountPointsTable->removeRow(iRow);
1739    }
1740  }
1741  _actDeleteMountPoints->setEnabled(false);
1742
1743  enableStartStop();
1744}
1745
1746// New Mount Points Selected
1747////////////////////////////////////////////////////////////////////////////
1748void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1749  int iRow = 0;
1750  QListIterator<QString> it(*mountPoints);
1751  while (it.hasNext()) {
1752    QStringList hlp = it.next().split(" ");
1753    QUrl    url(hlp[0]);
1754    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1755    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1756    QString nmea(hlp[5]);
1757    if (hlp[6] == "S") {
1758      fullPath = hlp[0].replace(0,2,"");
1759    }
1760    QString ntripVersion = "2";
1761    if (hlp.size() >= 7) {
1762      ntripVersion = (hlp[6]);
1763    }
1764
1765    _mountPointsTable->insertRow(iRow);
1766
1767    QTableWidgetItem* it;
1768    it = new QTableWidgetItem(url.userInfo());
1769    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1770    _mountPointsTable->setItem(iRow, 0, it);
1771
1772    it = new QTableWidgetItem(fullPath);
1773    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1774    _mountPointsTable->setItem(iRow, 1, it);
1775
1776    it = new QTableWidgetItem(format);
1777    _mountPointsTable->setItem(iRow, 2, it);
1778
1779    it = new QTableWidgetItem(country);
1780    _mountPointsTable->setItem(iRow, 3, it);
1781
1782    if      (nmea == "yes") {
1783    it = new QTableWidgetItem(latitude);
1784    _mountPointsTable->setItem(iRow, 4, it);
1785    it = new QTableWidgetItem(longitude);
1786    _mountPointsTable->setItem(iRow, 5, it);
1787    } else {
1788    it = new QTableWidgetItem(latitude);
1789    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1790    _mountPointsTable->setItem(iRow, 4, it);
1791    it = new QTableWidgetItem(longitude);
1792    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1793    _mountPointsTable->setItem(iRow, 5, it);
1794    }
1795
1796    it = new QTableWidgetItem(nmea);
1797    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1798    _mountPointsTable->setItem(iRow, 6, it);
1799
1800    it = new QTableWidgetItem(ntripVersion);
1801    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1802    _mountPointsTable->setItem(iRow, 7, it);
1803
1804    bncTableItem* bncIt = new bncTableItem();
1805    _mountPointsTable->setItem(iRow, 8, bncIt);
1806
1807    iRow++;
1808  }
1809  _mountPointsTable->hideColumn(0);
1810  _mountPointsTable->hideColumn(3);
1811  _mountPointsTable->sortItems(1);
1812  delete mountPoints;
1813
1814  enableStartStop();
1815}
1816
1817// Save Options (serialize)
1818////////////////////////////////////////////////////////////////////////////
1819void bncWindow::slotSaveOptions() {
1820  saveOptions();
1821  bncSettings settings;
1822  settings.sync();
1823}
1824
1825// Save Options (memory only)
1826////////////////////////////////////////////////////////////////////////////
1827void bncWindow::saveOptions() {
1828
1829  QStringList mountPoints;
1830  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1831
1832    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1833      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1834                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1835
1836      mountPoints.append(url.toString() + " " +
1837                         _mountPointsTable->item(iRow, 2)->text()
1838                 + " " + _mountPointsTable->item(iRow, 3)->text()
1839                 + " " + _mountPointsTable->item(iRow, 4)->text()
1840                 + " " + _mountPointsTable->item(iRow, 5)->text()
1841                 + " " + _mountPointsTable->item(iRow, 6)->text()
1842                 + " " + _mountPointsTable->item(iRow, 7)->text());
1843    } else {
1844      mountPoints.append(
1845                  "//" + _mountPointsTable->item(iRow, 1)->text()
1846                 + " " + _mountPointsTable->item(iRow, 2)->text()
1847                 + " " + _mountPointsTable->item(iRow, 3)->text()
1848                 + " " + _mountPointsTable->item(iRow, 4)->text()
1849                 + " " + _mountPointsTable->item(iRow, 5)->text()
1850                 + " " + _mountPointsTable->item(iRow, 6)->text()
1851                 + " " + _mountPointsTable->item(iRow, 7)->text());
1852    }
1853  }
1854
1855  QStringList cmbStreams;
1856  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1857    QString hlp;
1858    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1859      if (_cmbTable->item(iRow, iCol)) {
1860        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1861      }
1862    }
1863    if (!hlp.isEmpty()) {
1864      cmbStreams << hlp;
1865    }
1866  }
1867
1868  QStringList uploadMountpointsOut;
1869  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1870    QString hlp;
1871    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1872      if (_uploadTable->cellWidget(iRow, iCol) &&
1873          (iCol == 3 || iCol == 4 || iCol == 5)) {
1874        if      (iCol == 3) {
1875          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1876          hlp += passwd->text() + ",";
1877        }
1878        else if (iCol == 4) {
1879          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1880          hlp += system->currentText() + ",";
1881        }
1882        else if (iCol == 5) {
1883          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1884          QString state; state.setNum(com->checkState());
1885          hlp +=  state + ",";
1886        }
1887      }
1888      else if (_uploadTable->item(iRow, iCol)) {
1889        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1890      }
1891    }
1892    if (!hlp.isEmpty()) {
1893      uploadMountpointsOut << hlp;
1894    }
1895  }
1896
1897  QStringList uploadEphMountpointsOut;
1898  for (int iRow = 0; iRow < _uploadEphTable->rowCount(); iRow++) {
1899    QString hlp;
1900    for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
1901      if (_uploadEphTable->cellWidget(iRow, iCol) &&
1902          (iCol == 3 || iCol == 4)) {
1903        if      (iCol == 3) {
1904          QLineEdit* passwd = (QLineEdit*)(_uploadEphTable->cellWidget(iRow, iCol));
1905          hlp += passwd->text() + ",";
1906        }
1907        else if (iCol == 4) {
1908          QComboBox* system = (QComboBox*)(_uploadEphTable->cellWidget(iRow, iCol));
1909          hlp += system->currentText() + ",";
1910        }
1911      }
1912      else if (_uploadEphTable->item(iRow, iCol)) {
1913        hlp += _uploadEphTable->item(iRow, iCol)->text() + ",";
1914      }
1915    }
1916    if (!hlp.isEmpty()) {
1917      uploadEphMountpointsOut << hlp;
1918    }
1919  }
1920
1921  bncSettings settings;
1922
1923  settings.setValue("startTab",    _aogroup->currentIndex());
1924  settings.setValue("statusTab",   _loggroup->currentIndex());
1925  settings.setValue("mountPoints", mountPoints);
1926// Network
1927  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1928  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1929  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1930  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1931// General
1932  settings.setValue("logFile",     _logFileLineEdit->text());
1933  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1934  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1935  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1936  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1937// RINEX Observations
1938  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1939  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1940  settings.setValue("rnxSampl",    _rnxSamplSpinBox->value());
1941  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1942  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1943  settings.setValue("rnxV3filenames",_rnxV3filenameCheckBox->checkState());
1944  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1945  (_rnxV3filenameCheckBox->checkState()) ?
1946    settings.setValue("rnxV3",       _rnxV3filenameCheckBox->checkState()) :
1947    settings.setValue("rnxV3",       _rnxV3CheckBox->checkState());
1948  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1949// RINEX Ephemeris
1950  settings.setValue("ephPath",       _ephPathLineEdit->text());
1951  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1952  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1953  settings.setValue("ephV3filenames", _ephV3filenameCheckBox->checkState());
1954  (_ephV3filenameCheckBox->checkState()) ?
1955    settings.setValue("ephV3",       _ephV3filenameCheckBox->checkState()) :
1956    settings.setValue("ephV3",       _ephV3CheckBox->checkState());
1957// Broadcast Corrections
1958  settings.setValue("corrPath",    _corrPathLineEdit->text());
1959  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1960  settings.setValue("corrPort",    _corrPortLineEdit->text());
1961// Feed Engine
1962  settings.setValue("outPort",     _outPortLineEdit->text());
1963  settings.setValue("outWait",     _outWaitSpinBox->value());
1964  settings.setValue("outSampl",    _outSamplSpinBox->value());
1965  settings.setValue("outFile",     _outFileLineEdit->text());
1966  settings.setValue("outUPort",    _outUPortLineEdit->text());
1967// Serial Output
1968  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1969  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1970  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1971  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1972  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1973  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1974  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1975  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1976  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1977  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1978  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1979// Outages
1980  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1981  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1982  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1983  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1984// Miscellaneous
1985  settings.setValue("miscMount",   _miscMountLineEdit->text());
1986  settings.setValue("miscPort",    _miscPortLineEdit->text());
1987  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1988  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1989// Reqc
1990  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1991  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1992  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1993  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1994  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1995  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1996  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1997  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1998  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1999// SP3 Comparison
2000  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
2001  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
2002  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
2003// Combine Corrections
2004  if (!cmbStreams.isEmpty()) {
2005    settings.setValue("cmbStreams", cmbStreams);
2006  }
2007  else {
2008    settings.setValue("cmbStreams", "");
2009  }
2010  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
2011  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
2012  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
2013  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
2014// Upload Corrections
2015  if (!uploadMountpointsOut.isEmpty()) {
2016    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
2017  }
2018  else {
2019    settings.setValue("uploadMountpointsOut", "");
2020  }
2021  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
2022  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
2023  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
2024  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
2025  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
2026// Upload Ephemeris
2027  if (!uploadEphMountpointsOut.isEmpty()) {
2028    settings.setValue("uploadEphMountpointsOut", uploadEphMountpointsOut);
2029  }
2030  else {
2031    settings.setValue("uploadEphMountpointsOut", "");
2032  }
2033  settings.setValue("uploadSamplRtcmEph", _uploadSamplRtcmEphSpinBox->value());
2034
2035  if (_caster) {
2036    _caster->readMountPoints();
2037  }
2038
2039  _pppWidgets.saveOptions();
2040}
2041
2042// All get slots terminated
2043////////////////////////////////////////////////////////////////////////////
2044void bncWindow::slotGetThreadsFinished() {
2045  BNC_CORE->slotMessage("All Get Threads Terminated", true);
2046  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2047  delete _casterEph; _casterEph = 0;
2048  _runningRealTime = false;
2049}
2050
2051// Start It!
2052////////////////////////////////////////////////////////////////////////////
2053void bncWindow::slotStart() {
2054  saveOptions();
2055  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
2056    _runningPPP = true;
2057    enableStartStop();
2058    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
2059    BNC_CORE->startPPP();
2060    _bncFigurePPP->reset();
2061  }
2062  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2063    if (_reqcActionComboBox->currentText() == "Analyze") {
2064      _runningQC = true;
2065      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2066      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2067      reqcAnalyze->start();
2068    }
2069    else {
2070      _runningEdit = true;
2071      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2072      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2073      reqcEdit->start();
2074    }
2075    enableStartStop();
2076  }
2077  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
2078    _runningSp3Comp = true;
2079    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2080    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2081    sp3Comp->start();
2082    enableStartStop();
2083  }
2084  else {
2085    startRealTime();
2086    BNC_CORE->startPPP();
2087  }
2088}
2089
2090// Start Real-Time (Retrieve Data etc.)
2091////////////////////////////////////////////////////////////////////////////
2092void bncWindow::startRealTime() {
2093
2094  _runningRealTime = true;
2095
2096  _bncFigurePPP->reset();
2097
2098  _actDeleteMountPoints->setEnabled(false);
2099
2100  enableStartStop();
2101
2102  _caster = new bncCaster();
2103
2104  BNC_CORE->setCaster(_caster);
2105  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2106  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2107  BNC_CORE->initCombination();
2108
2109  connect(_caster, SIGNAL(getThreadsFinished()),
2110          this, SLOT(slotGetThreadsFinished()));
2111
2112  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2113           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2114
2115  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " (" BNC_OS ") ==========", true);
2116
2117  bncSettings settings;
2118
2119  // Active panels
2120  // -------------
2121  if (!_rnxPathLineEdit->text().isEmpty())
2122      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2123  if (!_ephPathLineEdit->text().isEmpty())
2124      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2125  if (!_corrPathLineEdit->text().isEmpty())
2126      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2127  if (!_outPortLineEdit->text().isEmpty())
2128      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2129  if (!_serialMountPointLineEdit->text().isEmpty())
2130      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2131  if (!_adviseObsRateComboBox->currentText().isEmpty())
2132      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2133  if (!_miscMountLineEdit->text().isEmpty())
2134      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2135  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2136      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2137  if (_cmbTable->rowCount() > 0)
2138      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2139  if (_uploadTable->rowCount() > 0)
2140      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2141  if (_uploadEphTable->rowCount() > 0)
2142      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2143
2144  QDir rnxdir(settings.value("rnxPath").toString());
2145  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2146
2147  QString rnx_file = settings.value("rnxScript").toString();
2148  if ( !rnx_file.isEmpty() ) {
2149    QFile rnxfile(settings.value("rnxScript").toString());
2150    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2151  }
2152
2153  QDir ephdir(settings.value("ephPath").toString());
2154  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2155
2156  QDir corrdir(settings.value("corrPath").toString());
2157  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2158
2159  QString advise_file = settings.value("adviseScript").toString();
2160  if ( !advise_file.isEmpty() ) {
2161    QFile advisefile(settings.value("adviseScript").toString());
2162    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2163  }
2164
2165  _caster->readMountPoints();
2166
2167  _casterEph = new bncEphUploadCaster();
2168}
2169
2170// Retrieve Data
2171////////////////////////////////////////////////////////////////////////////
2172void bncWindow::slotStop() {
2173  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2174                                   QMessageBox::Yes, QMessageBox::No,
2175                                   QMessageBox::NoButton);
2176  if (iRet == QMessageBox::Yes) {
2177    BNC_CORE->stopPPP();
2178    BNC_CORE->stopCombination();
2179    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2180    delete _casterEph; _casterEph = 0;
2181    _runningRealTime = false;
2182    _runningPPP      = false;
2183    enableStartStop();
2184  }
2185}
2186
2187// Close Application gracefully
2188////////////////////////////////////////////////////////////////////////////
2189void bncWindow::closeEvent(QCloseEvent* event) {
2190
2191  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2192                                   QMessageBox::Yes, QMessageBox::No,
2193                                   QMessageBox::Cancel);
2194
2195  if      (iRet == QMessageBox::Cancel) {
2196    event->ignore();
2197    return;
2198  }
2199  else if (iRet == QMessageBox::Yes) {
2200    slotSaveOptions();
2201  }
2202
2203  BNC_CORE->stopPPP();
2204
2205  QMainWindow::closeEvent(event);
2206}
2207
2208// User changed the selection of mountPoints
2209////////////////////////////////////////////////////////////////////////////
2210void bncWindow::slotSelectionChanged() {
2211  if (_mountPointsTable->selectedItems().isEmpty()) {
2212    _actDeleteMountPoints->setEnabled(false);
2213  }
2214  else {
2215    _actDeleteMountPoints->setEnabled(true);
2216  }
2217}
2218
2219// Display Program Messages
2220////////////////////////////////////////////////////////////////////////////
2221void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2222  if (showOnScreen ) {
2223    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2224  }
2225}
2226
2227// About Message
2228////////////////////////////////////////////////////////////////////////////
2229void bncWindow::slotAbout() {
2230 new bncAboutDlg(0);
2231}
2232
2233//Flowchart
2234////////////////////////////////////////////////////////////////////////////
2235void bncWindow::slotFlowchart() {
2236 new bncFlowchartDlg(0);
2237}
2238
2239// Help Window
2240////////////////////////////////////////////////////////////////////////////
2241void bncWindow::slotHelp() {
2242  QUrl url = QUrl::fromLocalFile(":/bnchelp.html");
2243  new bncHlpDlg(0, url);
2244}
2245
2246// Select Fonts
2247////////////////////////////////////////////////////////////////////////////
2248void bncWindow::slotFontSel() {
2249  bool ok;
2250  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2251  if (ok) {
2252    bncSettings settings;
2253    settings.setValue("font", newFont.toString());
2254    QApplication::setFont(newFont);
2255    int ww = QFontMetrics(newFont).width('w');
2256    setMinimumSize(60*ww, 80*ww);
2257    resize(60*ww, 80*ww);
2258  }
2259}
2260
2261// Whats This Help
2262void bncWindow::slotWhatsThis() {
2263  QWhatsThis::enterWhatsThisMode();
2264}
2265
2266//
2267////////////////////////////////////////////////////////////////////////////
2268void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2269  _threads = threads;
2270
2271  _bncFigure->updateMountPoints();
2272  _bncFigureLate->updateMountPoints();
2273
2274  populateMountPointsTable();
2275  bncSettings settings;
2276  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2277  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2278  QListIterator<bncGetThread*> iTh(threads);
2279  while (iTh.hasNext()) {
2280    bncGetThread* thread = iTh.next();
2281    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2282      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2283                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2284      if (url                                      == thread->mountPoint() &&
2285          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2286          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2287        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2288        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2289                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2290        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2291                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2292        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2293                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2294        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2295                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2296        break;
2297      }
2298    }
2299  }
2300}
2301
2302//
2303////////////////////////////////////////////////////////////////////////////
2304void bncWindow::CreateMenu() {
2305  // Create Menus
2306  // ------------
2307  _menuFile = menuBar()->addMenu(tr("&File"));
2308  _menuFile->addAction(_actFontSel);
2309  _menuFile->addSeparator();
2310  _menuFile->addAction(_actSaveOpt);
2311  _menuFile->addSeparator();
2312  _menuFile->addAction(_actQuit);
2313
2314  _menuHlp = menuBar()->addMenu(tr("&Help"));
2315  _menuHlp->addAction(_actHelp);
2316  _menuHlp->addAction(_actFlowchart);
2317  _menuHlp->addAction(_actAbout);
2318}
2319
2320// Toolbar
2321////////////////////////////////////////////////////////////////////////////
2322void bncWindow::AddToolbar() {
2323  QToolBar* toolBar = new QToolBar;
2324  addToolBar(Qt::BottomToolBarArea, toolBar);
2325  toolBar->setMovable(false);
2326  toolBar->addAction(_actAddMountPoints);
2327  toolBar->addAction(_actDeleteMountPoints);
2328  toolBar->addAction(_actMapMountPoints);
2329  toolBar->addAction(_actStart);
2330  toolBar->addAction(_actStop);
2331  toolBar->addWidget(new QLabel("                                           "));
2332  toolBar->addAction(_actwhatsthis);
2333}
2334
2335// About
2336////////////////////////////////////////////////////////////////////////////
2337bncAboutDlg::bncAboutDlg(QWidget* parent) :
2338   QDialog(parent) {
2339
2340  QTextBrowser* tb = new QTextBrowser;
2341  QUrl url = QUrl::fromLocalFile(":/bncabout.html");
2342  tb->setSource(url);
2343  tb->setReadOnly(true);
2344
2345  int ww = QFontMetrics(font()).width('w');
2346  QPushButton* _closeButton = new QPushButton("Close");
2347  _closeButton->setMaximumWidth(10*ww);
2348  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2349
2350  QGridLayout* dlgLayout = new QGridLayout();
2351  QLabel* img = new QLabel();
2352  img->setPixmap(QPixmap(":ntrip-logo.png"));
2353  dlgLayout->addWidget(img, 0,0);
2354  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version " BNCVERSION), 0,1);
2355  dlgLayout->addWidget(tb,1,0,1,2);
2356  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2357
2358  setLayout(dlgLayout);
2359  resize(60*ww, 60*ww);
2360  setWindowTitle("About BNC");
2361  show();
2362}
2363
2364//
2365////////////////////////////////////////////////////////////////////////////
2366bncAboutDlg::~bncAboutDlg() {
2367
2368};
2369
2370// Flowchart
2371////////////////////////////////////////////////////////////////////////////
2372bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2373   QDialog(parent) {
2374
2375  int ww = QFontMetrics(font()).width('w');
2376  QPushButton* _closeButton = new QPushButton("Close");
2377  _closeButton->setMaximumWidth(10*ww);
2378  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2379
2380  QGridLayout* dlgLayout = new QGridLayout();
2381  QLabel* img = new QLabel();
2382  img->setPixmap(QPixmap(":bncflowchart.png"));
2383  dlgLayout->addWidget(img, 0,0);
2384  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2385
2386  setLayout(dlgLayout);
2387  setWindowTitle("Flow Chart");
2388  show();
2389}
2390
2391//
2392////////////////////////////////////////////////////////////////////////////
2393bncFlowchartDlg::~bncFlowchartDlg() {
2394};
2395
2396// Enable/Disable Widget (and change its color)
2397////////////////////////////////////////////////////////////////////////////
2398void bncWindow::enableWidget(bool enable, QWidget* widget) {
2399
2400  const static QPalette paletteWhite(QColor(255, 255, 255));
2401  const static QPalette paletteGray(QColor(230, 230, 230));
2402
2403  widget->setEnabled(enable);
2404  if (enable) {
2405    widget->setPalette(paletteWhite);
2406  }
2407  else {
2408    widget->setPalette(paletteGray);
2409  }
2410}
2411
2412//  Bnc Text
2413////////////////////////////////////////////////////////////////////////////
2414void bncWindow::slotBncTextChanged(){
2415
2416  const static QPalette paletteWhite(QColor(255, 255, 255));
2417  const static QPalette paletteGray(QColor(230, 230, 230));
2418
2419  bool enable = true;
2420
2421  // Proxy
2422  //------
2423  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2424    enable = !_proxyHostLineEdit->text().isEmpty();
2425    enableWidget(enable, _proxyPortLineEdit);
2426  }
2427
2428  // RINEX Observations
2429  // ------------------
2430  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2431    enable = !_rnxPathLineEdit->text().isEmpty();
2432    enableWidget(enable, _rnxIntrComboBox);
2433    enableWidget(enable, _rnxSamplSpinBox);
2434    enableWidget(enable, _rnxSkelLineEdit);
2435    enableWidget(enable, _rnxFileCheckBox);
2436    enableWidget(enable, _rnxScrpLineEdit);
2437    enableWidget(enable, _rnxV2Priority);
2438    enableWidget(enable, _rnxV3CheckBox);
2439
2440    bool enable1 = true;
2441    enable1 = _rnxV3CheckBox->isChecked();
2442    if (enable && enable1) {
2443      enableWidget(false, _rnxV2Priority);
2444    }
2445    if (enable && !enable1) {
2446      enableWidget(true, _rnxV2Priority);
2447    }
2448  }
2449
2450  // RINEX Observations, Signal Priority
2451  // -----------------------------------
2452  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2453    if (!_rnxPathLineEdit->text().isEmpty()) {
2454      enableWidget(enable, _rnxIntrComboBox);
2455      enable = !_rnxV3CheckBox->isChecked();
2456      enableWidget(enable, _rnxV2Priority);
2457    }
2458  }
2459
2460  // RINEX Ephemeris
2461  // ---------------
2462  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2463    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2464    enableWidget(enable, _ephIntrComboBox);
2465    enableWidget(enable, _ephV3CheckBox);
2466    enableWidget(enable, _ephV3filenameCheckBox);
2467  }
2468
2469  // Broadcast Corrections
2470  // ---------------------
2471  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2472    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2473    enableWidget(enable, _corrIntrComboBox);
2474  }
2475
2476  // Feed Engine
2477  // -----------
2478  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2479    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2480    enableWidget(enable, _outWaitSpinBox);
2481    enableWidget(enable, _outSamplSpinBox);
2482  }
2483
2484  // Serial Output
2485  // -------------
2486  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2487      sender() == _serialAutoNMEAComboBox) {
2488    enable = !_serialMountPointLineEdit->text().isEmpty();
2489    enableWidget(enable, _serialPortNameLineEdit);
2490    enableWidget(enable, _serialBaudRateComboBox);
2491    enableWidget(enable, _serialParityComboBox);
2492    enableWidget(enable, _serialDataBitsComboBox);
2493    enableWidget(enable, _serialStopBitsComboBox);
2494    enableWidget(enable, _serialFlowControlComboBox);
2495    enableWidget(enable, _serialAutoNMEAComboBox);
2496    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2497    enableWidget(enable2, _serialFileNMEALineEdit);
2498    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2499    enableWidget(enable3, _serialHeightNMEALineEdit);
2500    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2501  }
2502
2503  // Outages
2504  // -------
2505  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2506    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2507    enableWidget(enable, _adviseFailSpinBox);
2508    enableWidget(enable, _adviseRecoSpinBox);
2509    enableWidget(enable, _adviseScriptLineEdit);
2510  }
2511
2512  // Miscellaneous
2513  // -------------
2514  if (sender() == 0 || sender() == _miscMountLineEdit) {
2515    enable = !_miscMountLineEdit->text().isEmpty();
2516    enableWidget(enable, _miscIntrComboBox);
2517    enableWidget(enable, _miscScanRTCMCheckBox);
2518    enableWidget(enable, _miscPortLineEdit);
2519  }
2520
2521  // Combine Corrections
2522  // -------------------
2523  if (sender() == 0 || sender() == _cmbTable) {
2524    int iRow = _cmbTable->rowCount();
2525    if (iRow > 0) {
2526      enableWidget(true, _cmbMethodComboBox);
2527      enableWidget(true, _cmbMaxresLineEdit);
2528      enableWidget(true, _cmbSamplSpinBox);
2529      enableWidget(true, _cmbUseGlonass);
2530    }
2531    else {
2532      enableWidget(false, _cmbMethodComboBox);
2533      enableWidget(false, _cmbMaxresLineEdit);
2534      enableWidget(false, _cmbSamplSpinBox);
2535      enableWidget(false, _cmbUseGlonass);
2536    }
2537  }
2538
2539  // Upload(clk)
2540  // -----------
2541  int iRow = _uploadTable->rowCount();
2542  if (iRow > 0) {
2543    enableWidget(true, _uploadIntrComboBox);
2544    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2545    enableWidget(true, _uploadSamplClkRnxSpinBox);
2546    enableWidget(true, _uploadSamplSp3SpinBox);
2547    enableWidget(true, _uploadAntexFile);
2548  }
2549  else {
2550    enableWidget(false, _uploadIntrComboBox);
2551    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2552    enableWidget(false, _uploadSamplClkRnxSpinBox);
2553    enableWidget(false, _uploadSamplSp3SpinBox);
2554    enableWidget(false, _uploadAntexFile);
2555  }
2556
2557  // Upload(eph)
2558  // -----------
2559  iRow = _uploadEphTable->rowCount();
2560  if (iRow > 0) {
2561    enableWidget(true, _uploadSamplRtcmEphSpinBox);
2562  }
2563  else {
2564    enableWidget(false, _uploadSamplRtcmEphSpinBox);
2565  }
2566
2567  // QC
2568  // --
2569  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2570    enable = !_reqcActionComboBox->currentText().isEmpty();
2571    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2572//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2573    enableWidget(enable,                            _reqcObsFileChooser);
2574    enableWidget(enable,                            _reqcNavFileChooser);
2575    enableWidget(enable,                            _reqcOutLogLineEdit);
2576    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2577    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2578    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2579    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2580    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2581//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2582    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2583  }
2584
2585  // SP3 File Comparison
2586  // -------------------
2587  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2588    enable = !_sp3CompFileChooser->fileName().isEmpty();
2589    enableWidget(enable, _sp3CompLogLineEdit);
2590    enableWidget(enable, _sp3CompExclude);
2591  }
2592
2593  enableStartStop();
2594}
2595
2596//
2597////////////////////////////////////////////////////////////////////////////
2598void bncWindow::slotAddCmbRow() {
2599  int iRow = _cmbTable->rowCount();
2600  _cmbTable->insertRow(iRow);
2601  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2602    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2603  }
2604}
2605
2606//
2607////////////////////////////////////////////////////////////////////////////
2608void bncWindow::slotDelCmbRow() {
2609
2610  const static QPalette paletteWhite(QColor(255, 255, 255));
2611  const static QPalette paletteGray(QColor(230, 230, 230));
2612
2613  int nRows = _cmbTable->rowCount();
2614  bool flg[nRows];
2615  for (int iRow = 0; iRow < nRows; iRow++) {
2616    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2617      flg[iRow] = true;
2618    }
2619    else {
2620      flg[iRow] = false;
2621    }
2622  }
2623  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2624    if (flg[iRow]) {
2625      _cmbTable->removeRow(iRow);
2626    }
2627  }
2628  nRows = _cmbTable->rowCount();
2629  if (nRows < 1) {
2630    enableWidget(false, _cmbMethodComboBox);
2631    enableWidget(false, _cmbMaxresLineEdit);
2632    enableWidget(false, _cmbSamplSpinBox);
2633    enableWidget(false, _cmbUseGlonass);
2634  }
2635}
2636
2637//
2638////////////////////////////////////////////////////////////////////////////
2639void bncWindow::populateCmbTable() {
2640
2641  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2642    _cmbTable->removeRow(iRow);
2643  }
2644
2645  bncSettings settings;
2646
2647  int iRow = -1;
2648  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2649  while (it.hasNext()) {
2650    QStringList hlp = it.next().split(" ");
2651    if (hlp.size() > 2) {
2652      ++iRow;
2653      _cmbTable->insertRow(iRow);
2654    }
2655    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2656      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2657    }
2658  }
2659}
2660
2661//
2662////////////////////////////////////////////////////////////////////////////
2663void bncWindow::slotAddUploadRow() {
2664  int iRow = _uploadTable->rowCount();
2665  _uploadTable->insertRow(iRow);
2666  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2667    if      (iCol == 3) {
2668      QLineEdit* passwd = new QLineEdit();
2669      passwd->setFrame(false);
2670      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2671      _uploadTable->setCellWidget(iRow, iCol, passwd);
2672    }
2673    else if (iCol == 4) {
2674      QComboBox* system = new QComboBox();
2675      system->setEditable(false);
2676      system->addItems(QString("IGS14,ETRF2000,NAD83,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2677      system->setFrame(false);
2678      _uploadTable->setCellWidget(iRow, iCol, system);
2679    }
2680    else if (iCol == 5) {
2681      QCheckBox* com = new QCheckBox();
2682      _uploadTable->setCellWidget(iRow, iCol, com);
2683    }
2684    else if (iCol == 11) {
2685      bncTableItem* bncIt = new bncTableItem();
2686      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2687      _uploadTable->setItem(iRow, iCol, bncIt);
2688      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2689    }
2690    else {
2691      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2692    }
2693  }
2694}
2695
2696//
2697////////////////////////////////////////////////////////////////////////////
2698void bncWindow::slotDelUploadRow() {
2699  BNC_CORE->_uploadTableItems.clear();
2700  int nRows = _uploadTable->rowCount();
2701  bool flg[nRows];
2702  for (int iRow = 0; iRow < nRows; iRow++) {
2703    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2704      flg[iRow] = true;
2705    }
2706    else {
2707      flg[iRow] = false;
2708    }
2709  }
2710  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2711    if (flg[iRow]) {
2712      _uploadTable->removeRow(iRow);
2713    }
2714  }
2715  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2716    BNC_CORE->_uploadTableItems[iRow] =
2717                                (bncTableItem*) _uploadTable->item(iRow, 11);
2718  }
2719  nRows = _uploadTable->rowCount();
2720  if (nRows < 1) {
2721    enableWidget(false, _uploadIntrComboBox);
2722    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2723    enableWidget(false, _uploadSamplSp3SpinBox);
2724    enableWidget(false, _uploadSamplClkRnxSpinBox);
2725    enableWidget(false, _uploadAntexFile);
2726  }
2727}
2728
2729//
2730////////////////////////////////////////////////////////////////////////////
2731void bncWindow::populateUploadTable() {
2732  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2733    _uploadTable->removeRow(iRow);
2734  }
2735
2736  bncSettings settings;
2737
2738  int iRow = -1;
2739  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2740  while (it.hasNext()) {
2741    QStringList hlp = it.next().split(",");
2742    if (hlp.size() > 6) {
2743      ++iRow;
2744      _uploadTable->insertRow(iRow);
2745    }
2746    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2747      if      (iCol == 3) {
2748        QLineEdit* passwd = new QLineEdit();
2749        passwd->setFrame(false);
2750        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2751        passwd->setText(hlp[iCol]);
2752        _uploadTable->setCellWidget(iRow, iCol, passwd);
2753      }
2754      else if (iCol == 4) {
2755        QComboBox* system = new QComboBox();
2756        system->setEditable(false);
2757        system->addItems(QString(",IGS14,ETRF2000,NAD83,GDA94,SIRGAS2000,DREF91,Custom").split(","));
2758        system->setFrame(false);
2759        system->setCurrentIndex(system->findText(hlp[iCol]));
2760        _uploadTable->setCellWidget(iRow, iCol, system);
2761      }
2762      else if (iCol == 5) {
2763        QCheckBox* com = new QCheckBox();
2764        if (hlp[iCol].toInt() == Qt::Checked) {
2765          com->setCheckState(Qt::Checked);
2766        }
2767        _uploadTable->setCellWidget(iRow, iCol, com);
2768      }
2769      else if (iCol == 11) {
2770        bncTableItem* bncIt = new bncTableItem();
2771        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2772        _uploadTable->setItem(iRow, iCol, bncIt);
2773        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2774      }
2775      else {
2776        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2777      }
2778    }
2779  }
2780}
2781
2782//
2783////////////////////////////////////////////////////////////////////////////
2784void bncWindow::slotSetUploadTrafo() {
2785  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2786  dlg->exec();
2787  delete dlg;
2788}
2789
2790//
2791////////////////////////////////////////////////////////////////////////////
2792void bncWindow::slotAddUploadEphRow() {
2793  int iRow = _uploadEphTable->rowCount();
2794  _uploadEphTable->insertRow(iRow);
2795  for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
2796    if      (iCol == 3) {
2797      QLineEdit* passwd = new QLineEdit();
2798      passwd->setFrame(false);
2799      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2800      _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2801    }
2802    else if (iCol == 4) {
2803      QComboBox* system = new QComboBox();
2804      system->setEditable(false);
2805      system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2806      system->setFrame(false);
2807      _uploadEphTable->setCellWidget(iRow, iCol, system);
2808    }
2809    else if (iCol == 5) {
2810      bncTableItem* bncIt = new bncTableItem();
2811      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2812      _uploadEphTable->setItem(iRow, iCol, bncIt);
2813      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2814    }
2815    else {
2816      _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2817    }
2818  }
2819}
2820
2821//
2822////////////////////////////////////////////////////////////////////////////
2823void bncWindow::slotDelUploadEphRow() {
2824  BNC_CORE->_uploadTableItems.clear();
2825  int nRows = _uploadEphTable->rowCount();
2826  bool flg[nRows];
2827  for (int iRow = 0; iRow < nRows; iRow++) {
2828    if (_uploadEphTable->isItemSelected(_uploadEphTable->item(iRow,1))) {
2829      flg[iRow] = true;
2830    }
2831    else {
2832      flg[iRow] = false;
2833    }
2834  }
2835  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2836    if (flg[iRow]) {
2837      _uploadEphTable->removeRow(iRow);
2838    }
2839  }
2840  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2841    BNC_CORE->_uploadTableItems[iRow] =
2842                                (bncTableItem*) _uploadEphTable->item(iRow, 5);
2843  }
2844  nRows = _uploadEphTable->rowCount();
2845  if (nRows < 1) {
2846    enableWidget(false, _uploadSamplRtcmEphSpinBox);
2847  }
2848}
2849
2850//
2851////////////////////////////////////////////////////////////////////////////
2852void bncWindow::populateUploadEphTable() {
2853  for (int iRow = _uploadEphTable->rowCount()-1; iRow >=0; iRow--) {
2854    _uploadEphTable->removeRow(iRow);
2855  }
2856
2857  bncSettings settings;
2858
2859  int iRow = -1;
2860  QListIterator<QString> it(settings.value("uploadEphMountpointsOut").toStringList());
2861  while (it.hasNext()) {
2862    QStringList hlp = it.next().split(",");
2863    if (hlp.size() > 4) {
2864      ++iRow;
2865      _uploadEphTable->insertRow(iRow);
2866    }
2867    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2868      if      (iCol == 3) {
2869        QLineEdit* passwd = new QLineEdit();
2870        passwd->setFrame(false);
2871        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2872        passwd->setText(hlp[iCol]);
2873        _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2874      }
2875      else if (iCol == 4) {
2876        QComboBox* system = new QComboBox();
2877        system->setEditable(false);
2878        system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2879        system->setFrame(false);
2880        system->setCurrentIndex(system->findText(hlp[iCol]));
2881        _uploadEphTable->setCellWidget(iRow, iCol, system);
2882      }
2883      else if (iCol == 5) {
2884        bncTableItem* bncIt = new bncTableItem();
2885        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2886        _uploadEphTable->setItem(iRow, iCol, bncIt);
2887        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2888      }
2889      else {
2890        _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2891      }
2892    }
2893  }
2894}
2895
2896
2897// Progress Bar Change
2898////////////////////////////////////////////////////////////////////////////
2899void bncWindow::slotPostProcessingProgress(int nEpo) {
2900  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2901}
2902
2903// Post-Processing Reqc Finished
2904////////////////////////////////////////////////////////////////////////////
2905void bncWindow::slotPostProcessingFinished() {
2906  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2907  _runningPPP     = false;
2908  _runningEdit    = false;
2909  _runningQC      = false;
2910  _runningSp3Comp = false;
2911  _actStart->setText(tr("Sta&rt"));
2912  enableStartStop();
2913}
2914
2915// Edit teqc-like editing options
2916////////////////////////////////////////////////////////////////////////////
2917void bncWindow::slotReqcEditOption() {
2918  saveOptions();
2919  reqcDlg* dlg = new reqcDlg(this);
2920  dlg->move(this->pos().x()+50, this->pos().y()+50);
2921  dlg->exec();
2922  delete dlg;
2923}
2924
2925// Enable/Disable Start and Stop Buttons
2926////////////////////////////////////////////////////////////////////////////
2927void bncWindow::enableStartStop() {
2928  if ( running() ) {
2929    _actStart->setEnabled(false);
2930    if (_runningRealTime || _runningPPP) {
2931      _actStop->setEnabled(true);
2932    }
2933  }
2934  else {
2935    _actStart->setEnabled(true);
2936    _actStop->setEnabled(false);
2937  }
2938}
2939
2940// Show Map
2941////////////////////////////////////////////////////////////////////////////
2942void bncWindow::slotMapMountPoints() {
2943  saveOptions();
2944  t_bncMap* bncMap = new t_bncMap(this);
2945  bncMap->setMinimumSize(800, 600);
2946  bncMap->setWindowTitle("Selected Mountpoints");
2947
2948  bncSettings settings;
2949  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2950  while (it.hasNext()) {
2951    QStringList hlp = it.next().split(" ");
2952    if (hlp.size() < 5) continue;
2953    QUrl   url(hlp[0]);
2954    double latDeg = hlp[3].toDouble();
2955    double lonDeg = hlp[4].toDouble();
2956    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2957  }
2958
2959  bncMap->show();
2960}
2961
2962// Show Map
2963////////////////////////////////////////////////////////////////////////////
2964void bncWindow::slotMapPPP() {
2965#ifdef QT_WEBKIT
2966  saveOptions();
2967  enableWidget(false, _pppWidgets._mapWinButton);
2968  enableWidget(false, _pppWidgets._useGoogleMap);
2969  enableWidget(false, _pppWidgets._useOpenStreetMap);
2970  enableWidget(false, _pppWidgets._mapWinDotSize);
2971  enableWidget(false, _pppWidgets._mapWinDotColor);
2972
2973  if (!_mapWin) {
2974    _mapWin = new bncMapWin(this);
2975    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2976    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2977            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2978  }
2979  _mapWin->show();
2980#else
2981  QMessageBox::information(this, "Information",
2982                           "Qt Library compiled without QtWebKit");
2983#endif
2984}
2985
2986// Show Map
2987////////////////////////////////////////////////////////////////////////////
2988void bncWindow::slotMapPPPClosed() {
2989#ifdef QT_WEBKIT
2990  enableWidget(true, _pppWidgets._mapWinButton);
2991  enableWidget(true, _pppWidgets._useGoogleMap);
2992  enableWidget(true, _pppWidgets._useOpenStreetMap);
2993  enableWidget(true, _pppWidgets._mapWinDotSize);
2994  enableWidget(true, _pppWidgets._mapWinDotColor);
2995  if (_mapWin) {
2996    QListIterator<bncGetThread*> it(_threads);
2997    while (it.hasNext()) {
2998      bncGetThread* thread = it.next();
2999      thread->disconnect(_mapWin);
3000    }
3001    _mapWin->deleteLater();
3002    _mapWin = 0;
3003  }
3004#endif
3005}
Note: See TracBrowser for help on using the repository browser.