source: ntrip/trunk/BNC/src/bncwindow.cpp @ 8252

Last change on this file since 8252 was 8252, checked in by stoecker, 23 months ago

see #105 - reenable Qt4 build options, drop generic version dependend includes, replace by direct requirements, remaining QtCore? lines should also be replaced

File size: 158.1 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <QAction>
44#include <QApplication>
45#include <QCheckBox>
46#include <QCloseEvent>
47#include <QComboBox>
48#include <QDialog>
49#include <QFontDialog>
50#include <QGridLayout>
51#include <QHeaderView>
52#include <QLabel>
53#include <QLineEdit>
54#include <QMenu>
55#include <QMenuBar>
56#include <QMessageBox>
57#include <QPushButton>
58#include <QRadioButton>
59#include <QSpinBox>
60#include <QTableWidgetItem>
61#include <QTextEdit>
62#include <QToolBar>
63
64#include <unistd.h>
65#include "bncwindow.h"
66#include "bnccore.h"
67#include "bncgetthread.h"
68#include "bnctabledlg.h"
69#include "bncipport.h"
70#include "bncudpport.h"
71#include "bncserialport.h"
72#include "bnchlpdlg.h"
73#include "bnchtml.h"
74#include "bnctableitem.h"
75#include "bncsettings.h"
76#include "bncfigure.h"
77#include "bncfigurelate.h"
78#include "bncfigureppp.h"
79#include "bncversion.h"
80#include "bncbytescounter.h"
81#include "bncsslconfig.h"
82#include "upload/bnccustomtrafo.h"
83#include "upload/bncephuploadcaster.h"
84#include "qtfilechooser.h"
85#include "reqcdlg.h"
86#include "bncmap.h"
87#include "rinex/reqcedit.h"
88#include "rinex/reqcanalyze.h"
89#include "orbComp/sp3Comp.h"
90#ifdef QT_WEBKIT
91#  include "map/bncmapwin.h"
92#endif
93
94using namespace std;
95
96#ifdef GNSSCENTER_PLUGIN
97Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
98#endif
99
100// Constructor
101////////////////////////////////////////////////////////////////////////////
102bncWindow::bncWindow() {
103
104  const static QPalette paletteWhite(QColor(255, 255, 255));
105  const static QPalette paletteGray(QColor(230, 230, 230));
106
107#ifdef GNSSCENTER_PLUGIN
108  BNC_CORE->setConfFileName("");
109#endif
110
111  _caster    = 0;
112  _casterEph = 0;
113
114  _bncFigure     = new bncFigure(this);
115  _bncFigureLate = new bncFigureLate(this);
116  _bncFigurePPP  = new bncFigurePPP(this);
117
118  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
119          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
120
121  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
122  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
123
124  _runningRealTime    = false;
125  _runningPPP         = false;
126  _runningEdit        = false;
127  _runningQC          = false;
128  _runningSp3Comp     = false;
129  _reqcActionComboBox = 0; // necessary for enableStartStop()
130
131  _mapWin = 0;
132
133  int ww = QFontMetrics(this->font()).width('w');
134
135  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
136
137  setMinimumSize(100*ww, 70*ww);
138
139  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
140
141  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
142          this, SLOT(slotWindowMessage(QByteArray,bool)));
143
144  // Create Actions
145  // --------------
146  _actHelp = new QAction(tr("&Help Contents"),this);
147  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
148
149  _actAbout = new QAction(tr("&About BNC"),this);
150  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
151
152  _actFlowchart = new QAction(tr("&Flow Chart"),this);
153  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
154
155  _actFontSel = new QAction(tr("Select &Font"),this);
156  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
157
158  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
159  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
160
161  _actQuit  = new QAction(tr("&Quit"),this);
162  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
163
164  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
165  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
166
167  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
168  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
169  _actDeleteMountPoints->setEnabled(false);
170
171  _actMapMountPoints = new QAction(tr("&Map"),this);
172  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
173
174  _actStart = new QAction(tr("Sta&rt"),this);
175  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
176
177  _actStop = new QAction(tr("Sto&p"),this);
178  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
179
180  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
181  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
182
183  CreateMenu();
184  AddToolbar();
185
186  bncSettings settings;
187
188  // Network Options
189  // ---------------
190  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
191  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
192
193  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
194          this, SLOT(slotBncTextChanged()));
195
196  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
197  _sslIgnoreErrorsCheckBox = new QCheckBox();
198  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
199                                          settings.value("sslIgnoreErrors").toInt()));
200
201  // General Options
202  // ---------------
203  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
204  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
205  _rnxAppendCheckBox  = new QCheckBox();
206  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
207                                    settings.value("rnxAppend").toInt()));
208  _onTheFlyComboBox = new QComboBox();
209  _onTheFlyComboBox->setEditable(false);
210  _onTheFlyComboBox->addItems(QString("no,1 day,1 hour,5 min,1 min").split(","));
211  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
212  if (ii != -1) {
213    _onTheFlyComboBox->setCurrentIndex(ii);
214  }
215  _autoStartCheckBox  = new QCheckBox();
216  _autoStartCheckBox->setCheckState(Qt::CheckState(
217                                    settings.value("autoStart").toInt()));
218
219  // RINEX Observations Options
220  // --------------------------
221  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
222  _rnxIntrComboBox    = new QComboBox();
223  _rnxIntrComboBox->setEditable(false);
224  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
225  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
226  if (ii != -1) {
227    _rnxIntrComboBox->setCurrentIndex(ii);
228  }
229  _rnxSamplSpinBox    = new QSpinBox();
230  _rnxSamplSpinBox->setMinimum(0);
231  _rnxSamplSpinBox->setMaximum(60);
232  _rnxSamplSpinBox->setSingleStep(5);
233  _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
234  _rnxFileCheckBox = new QCheckBox();
235  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
236  _rnxSamplSpinBox->setSuffix(" sec");
237  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
238  _rnxSkelLineEdit->setMaximumWidth(5*ww);
239  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
240  _rnxV3CheckBox      = new QCheckBox();
241  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
242  _rnxV3filenameCheckBox = new QCheckBox();
243  _rnxV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3filenames").toInt()));
244  QString hlp = settings.value("rnxV2Priority").toString();
245  if (hlp.isEmpty()) {
246    hlp = "G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_";
247  }
248  _rnxV2Priority = new QLineEdit(hlp);
249
250  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
251          this, SLOT(slotBncTextChanged()));
252  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
253          this, SLOT(slotBncTextChanged()));
254
255  // RINEX Ephemeris Options
256  // -----------------------
257  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
258  _ephIntrComboBox    = new QComboBox();
259  _ephIntrComboBox->setEditable(false);
260  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
261  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
262  if (jj != -1) {
263    _ephIntrComboBox->setCurrentIndex(jj);
264  }
265  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
266  _ephV3CheckBox = new QCheckBox();
267  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
268
269  _ephV3filenameCheckBox = new QCheckBox();
270  _ephV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("ephV3filenames").toInt()));
271
272  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
273          this, SLOT(slotBncTextChanged()));
274
275  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
276          this, SLOT(slotBncTextChanged()));
277
278  // Broadcast Corrections Options
279  // -----------------------------
280  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
281  _corrIntrComboBox    = new QComboBox();
282  _corrIntrComboBox->setEditable(false);
283  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
284  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
285  if (mm != -1) {
286    _corrIntrComboBox->setCurrentIndex(mm);
287  }
288  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
289
290  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
291          this, SLOT(slotBncTextChanged()));
292
293  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
294          this, SLOT(slotBncTextChanged()));
295
296  // Feed Engine Options
297  // -------------------
298  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
299  _outWaitSpinBox   = new QSpinBox();
300  _outWaitSpinBox->setMinimum(1);
301  _outWaitSpinBox->setMaximum(30);
302  _outWaitSpinBox->setSingleStep(1);
303  _outWaitSpinBox->setSuffix(" sec");
304  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
305  _outSamplSpinBox    = new QSpinBox();
306  _outSamplSpinBox->setMinimum(0);
307  _outSamplSpinBox->setMaximum(60);
308  _outSamplSpinBox->setSingleStep(5);
309  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
310  _outSamplSpinBox->setSuffix(" sec");
311  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
312  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
313
314  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
315          this, SLOT(slotBncTextChanged()));
316
317  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
318          this, SLOT(slotBncTextChanged()));
319
320  // Serial Output Options
321  // ---------------------
322  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
323  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
324  _serialBaudRateComboBox = new QComboBox();
325  _serialBaudRateComboBox->addItems(QString("110,300,600,"
326            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
327  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
328  if (kk != -1) {
329    _serialBaudRateComboBox->setCurrentIndex(kk);
330  }
331  _serialFlowControlComboBox = new QComboBox();
332  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
333  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
334  if (kk != -1) {
335    _serialFlowControlComboBox->setCurrentIndex(kk);
336  }
337  _serialDataBitsComboBox = new QComboBox();
338  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
339  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
340  if (kk != -1) {
341    _serialDataBitsComboBox->setCurrentIndex(kk);
342  }
343  _serialParityComboBox   = new QComboBox();
344  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
345  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
346  if (kk != -1) {
347    _serialParityComboBox->setCurrentIndex(kk);
348  }
349  _serialStopBitsComboBox = new QComboBox();
350  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
351  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
352  if (kk != -1) {
353    _serialStopBitsComboBox->setCurrentIndex(kk);
354  }
355  _serialAutoNMEAComboBox  = new QComboBox();
356  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
357  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
358  if (kk != -1) {
359    _serialAutoNMEAComboBox->setCurrentIndex(kk);
360  }
361  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
362  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
363
364  _serialManualNMEASamplingSpinBox = new QSpinBox();
365  _serialManualNMEASamplingSpinBox->setMinimum(0);
366  _serialManualNMEASamplingSpinBox->setMaximum(300);
367  _serialManualNMEASamplingSpinBox->setSingleStep(10);
368  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
369  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
370
371  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
372          this, SLOT(slotBncTextChanged()));
373
374  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
375          this, SLOT(slotBncTextChanged()));
376
377  // Outages Options
378  // ---------------
379  _adviseObsRateComboBox    = new QComboBox();
380  _adviseObsRateComboBox->setEditable(false);
381  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
382  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
383  if (kk != -1) {
384    _adviseObsRateComboBox->setCurrentIndex(kk);
385  }
386  _adviseFailSpinBox = new QSpinBox();
387  _adviseFailSpinBox->setMinimum(0);
388  _adviseFailSpinBox->setMaximum(60);
389  _adviseFailSpinBox->setSingleStep(1);
390  _adviseFailSpinBox->setSuffix(" min");
391  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
392  _adviseRecoSpinBox = new QSpinBox();
393  _adviseRecoSpinBox->setMinimum(0);
394  _adviseRecoSpinBox->setMaximum(60);
395  _adviseRecoSpinBox->setSingleStep(1);
396  _adviseRecoSpinBox->setSuffix(" min");
397  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
398  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
399
400  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
401          this, SLOT(slotBncTextChanged()));
402
403  // Miscellaneous Options
404  // ---------------------
405  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
406  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
407  _miscIntrComboBox   = new QComboBox();
408  _miscIntrComboBox->setEditable(false);
409  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
410  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
411  if (ll != -1) {
412    _miscIntrComboBox->setCurrentIndex(ll);
413  }
414  _miscScanRTCMCheckBox  = new QCheckBox();
415  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
416                                    settings.value("miscScanRTCM").toInt()));
417
418  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
419          this, SLOT(slotBncTextChanged()));
420
421  // Streams
422  // -------
423  _mountPointsTable   = new QTableWidget(0,9);
424
425  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
426  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
427  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
428  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
429  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
430  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
431  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
432#if QT_VERSION < 0x050000
433  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
434#else
435  _mountPointsTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
436#endif
437  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
438  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
439  _mountPointsTable->setHorizontalHeaderLabels(labels);
440  _mountPointsTable->setGridStyle(Qt::NoPen);
441  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
442  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
443  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
444  _mountPointsTable->hideColumn(0);
445  _mountPointsTable->hideColumn(3);
446  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
447          SLOT(slotSelectionChanged()));
448  populateMountPointsTable();
449
450  _log = new QTextEdit();
451  _log->setReadOnly(true);
452  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
453  _log->setFont(msFont);
454  _log->document()->setMaximumBlockCount(1000);
455
456  // Combine Corrections
457  // -------------------
458  _cmbTable = new QTableWidget(0,3);
459  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
460  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
461  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
462  _cmbTable->setMaximumWidth(30*ww);
463  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
464  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
465  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
466#if QT_VERSION < 0x050000
467  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
468#else
469  _cmbTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
470#endif
471  _cmbTable->horizontalHeader()->setStretchLastSection(true);
472  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
473
474  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
475  _cmbUseGlonass     = new QCheckBox();
476  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
477
478  _cmbSamplSpinBox = new QSpinBox;
479  _cmbSamplSpinBox->setMinimum(10);
480  _cmbSamplSpinBox->setMaximum(60);
481  _cmbSamplSpinBox->setSingleStep(10);
482  _cmbSamplSpinBox->setMaximumWidth(9*ww);
483  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
484  _cmbSamplSpinBox->setSuffix(" sec");
485
486  QPushButton* addCmbRowButton = new QPushButton("Add Row");
487  QPushButton* delCmbRowButton = new QPushButton("Delete");
488
489  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
490          SLOT(slotBncTextChanged()));
491
492  _cmbMethodComboBox = new QComboBox();
493  _cmbMethodComboBox->setEditable(false);
494  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
495  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
496  if (im != -1) {
497    _cmbMethodComboBox->setCurrentIndex(im);
498  }
499
500  int iRow = _cmbTable->rowCount();
501  if (iRow > 0) {
502    enableWidget(true, _cmbMethodComboBox);
503    enableWidget(true, _cmbMaxresLineEdit);
504    enableWidget(true, _cmbSamplSpinBox);
505    enableWidget(true, _cmbUseGlonass);
506  }
507  else {
508    enableWidget(false, _cmbMethodComboBox);
509    enableWidget(false, _cmbMaxresLineEdit);
510    enableWidget(false, _cmbSamplSpinBox);
511    enableWidget(false, _cmbUseGlonass);
512  }
513
514  // Upload Results
515  // -------------
516  _uploadTable = new QTableWidget(0,12);
517  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
518  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
519  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
520  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
521  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
522  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
523  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
524  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
525  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
526  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
527  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
528  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
529  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
530  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
531  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
532#if QT_VERSION < 0x050000
533  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
534#else
535  _uploadTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
536#endif
537  _uploadTable->horizontalHeader()->setStretchLastSection(true);
538  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
539
540  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
541          SLOT(slotBncTextChanged()));
542
543  QPushButton* addUploadRowButton = new QPushButton("Add Row");
544  QPushButton* delUploadRowButton = new QPushButton("Del Row");
545  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
546  _uploadIntrComboBox = new QComboBox;
547  _uploadIntrComboBox->setEditable(false);
548  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
549  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
550  if (ii != -1) {
551    _uploadIntrComboBox->setCurrentIndex(ii);
552  }
553
554  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
555  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
556
557  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
558  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
559  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
560  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
561  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
562  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
563  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
564
565  _uploadSamplSp3SpinBox = new QSpinBox;
566  _uploadSamplSp3SpinBox->setMinimum(0);
567  _uploadSamplSp3SpinBox->setMaximum(15);
568  _uploadSamplSp3SpinBox->setSingleStep(1);
569  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
570  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
571  _uploadSamplSp3SpinBox->setSuffix(" min");
572
573  _uploadSamplClkRnxSpinBox = new QSpinBox;
574  _uploadSamplClkRnxSpinBox->setMinimum(0);
575  _uploadSamplClkRnxSpinBox->setMaximum(60);
576  _uploadSamplClkRnxSpinBox->setSingleStep(5);
577  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
578  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
579  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
580
581  int iRowT = _uploadTable->rowCount();
582  if (iRowT > 0) {
583    enableWidget(true, _uploadIntrComboBox);
584    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
585    enableWidget(true, _uploadSamplSp3SpinBox);
586    enableWidget(true, _uploadSamplClkRnxSpinBox);
587    enableWidget(true, _uploadAntexFile);
588  }
589  else {
590    enableWidget(false, _uploadIntrComboBox);
591    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
592    enableWidget(false, _uploadSamplSp3SpinBox);
593    enableWidget(false, _uploadSamplClkRnxSpinBox);
594    enableWidget(false, _uploadAntexFile);
595  }
596
597  // Upload RTCM3 Ephemeris
598  // ----------------------
599  _uploadEphTable = new QTableWidget(0,6);
600  _uploadEphTable->setColumnCount(6);
601  _uploadEphTable->setRowCount(0);
602  _uploadEphTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, bytes").split(","));
603  _uploadEphTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
604  _uploadEphTable->setSelectionBehavior(QAbstractItemView::SelectRows);
605  _uploadEphTable->horizontalHeader()->resizeSection( 0,13*ww);
606  _uploadEphTable->horizontalHeader()->resizeSection( 1, 5*ww);
607  _uploadEphTable->horizontalHeader()->resizeSection( 2, 8*ww);
608  _uploadEphTable->horizontalHeader()->resizeSection( 3, 8*ww);
609  _uploadEphTable->horizontalHeader()->resizeSection( 4,10*ww);
610  _uploadEphTable->horizontalHeader()->resizeSection( 5,12*ww);
611#if QT_VERSION < 0x050000
612  _uploadEphTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
613#else
614  _uploadEphTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
615#endif
616  _uploadEphTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
617
618  connect(_uploadEphTable, SIGNAL(itemSelectionChanged()),
619          SLOT(slotBncTextChanged()));
620
621  QPushButton* addUploadEphRowButton = new QPushButton("Add Row");
622  addUploadEphRowButton->setMaximumWidth(9*ww);
623  QPushButton* delUploadEphRowButton = new QPushButton("Del Row");
624  delUploadEphRowButton->setMaximumWidth(9*ww);
625
626  _uploadSamplRtcmEphSpinBox = new QSpinBox;
627  _uploadSamplRtcmEphSpinBox->setMinimum(0);
628  _uploadSamplRtcmEphSpinBox->setMaximum(60);
629  _uploadSamplRtcmEphSpinBox->setSingleStep(5);
630  _uploadSamplRtcmEphSpinBox->setMaximumWidth(9*ww);
631  _uploadSamplRtcmEphSpinBox->setValue(settings.value("uploadSamplRtcmEph").toInt());
632  _uploadSamplRtcmEphSpinBox->setSuffix(" sec");
633
634  iRowT = _uploadEphTable->rowCount();
635  if (iRowT > 0) {
636    enableWidget(true, _uploadSamplRtcmEphSpinBox);
637  }
638  else {
639    enableWidget(false, _uploadSamplRtcmEphSpinBox);
640  }
641
642  // Canvas with Editable Fields
643  // ---------------------------
644  _canvas = new QWidget;
645  setCentralWidget(_canvas);
646
647  _aogroup = new QTabWidget();
648  _aogroup->setElideMode(Qt::ElideNone);
649  _aogroup->setUsesScrollButtons(true);
650  QWidget* pgroup = new QWidget();
651  QWidget* ggroup = new QWidget();
652  QWidget* sgroup = new QWidget();
653  QWidget* egroup = new QWidget();
654  QWidget* agroup = new QWidget();
655  QWidget* cgroup = new QWidget();
656  QWidget* ogroup = new QWidget();
657  QWidget* rgroup = new QWidget();
658  QWidget* sergroup = new QWidget();
659  QWidget* pppGroup1 = new QWidget();
660  QWidget* pppGroup2 = new QWidget();
661  QWidget* pppGroup3 = new QWidget();
662  QWidget* pppGroup4 = new QWidget();
663  QWidget* reqcgroup = new QWidget();
664  QWidget* sp3CompGroup = new QWidget();
665  QWidget* cmbgroup = new QWidget();
666  QWidget* uploadgroup = new QWidget();
667  QWidget* uploadEphgroup = new QWidget();
668  _aogroup->addTab(pgroup,tr("Network"));
669  _aogroup->addTab(ggroup,tr("General"));
670  _aogroup->addTab(ogroup,tr("RINEX Observations"));
671  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
672  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
673  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
674  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
675  _aogroup->addTab(sgroup,tr("Feed Engine"));
676  _aogroup->addTab(sergroup,tr("Serial Output"));
677  _aogroup->addTab(agroup,tr("Outages"));
678  _aogroup->addTab(rgroup,tr("Miscellaneous"));
679  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
680  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
681  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
682  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
683  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
684  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
685  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
686
687  // Log Tab
688  // -------
689  _loggroup = new QTabWidget();
690  _loggroup->addTab(_log,tr("Log"));
691  _loggroup->addTab(_bncFigure,tr("Throughput"));
692  _loggroup->addTab(_bncFigureLate,tr("Latency"));
693  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
694
695  // Netowork (Proxy and SSL) Tab
696  // ----------------------------
697  QGridLayout* pLayout = new QGridLayout;
698  pLayout->setColumnMinimumWidth(0,13*ww);
699  _proxyPortLineEdit->setMaximumWidth(9*ww);
700
701  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
702  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
703  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
704  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
705  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
706  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
707  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
708  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
709  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
710  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
711  pLayout->addWidget(new QLabel(""),                                         5, 1);
712  pLayout->setRowStretch(6, 999);
713
714  pgroup->setLayout(pLayout);
715
716  // General Tab
717  // -----------
718  QGridLayout* gLayout = new QGridLayout;
719  gLayout->setColumnMinimumWidth(0,14*ww);
720  _onTheFlyComboBox->setMaximumWidth(9*ww);
721
722  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
723  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
724  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
725  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
726  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
727  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
728  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
729  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
730  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
731  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
732  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
733  gLayout->addWidget(new QLabel(""),                             6, 1);
734  gLayout->setRowStretch(7, 999);
735
736  ggroup->setLayout(gLayout);
737
738  // RINEX Observations
739  // ------------------
740  QGridLayout* oLayout = new QGridLayout;
741  oLayout->setColumnMinimumWidth(0,14*ww);
742  _rnxIntrComboBox->setMaximumWidth(9*ww);
743  _rnxSamplSpinBox->setMaximumWidth(9*ww);
744
745  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
746  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
747  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
748  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
749  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
750  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
751  oLayout->addWidget(_rnxSamplSpinBox,                             2, 3, Qt::AlignLeft);
752  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
753  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
754  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
755  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
756  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
757  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
758  oLayout->addWidget(new QLabel("Version 2 signal priority"),      5, 0);
759  oLayout->addWidget(_rnxV2Priority,                               5, 1, 1, 15);
760  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
761  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
762  oLayout->addWidget(new QLabel("Version 3 filenames"),            6, 2);
763  oLayout->addWidget(_rnxV3filenameCheckBox,                       6, 3);
764  oLayout->addWidget(new QLabel(""),                               7, 1);
765  oLayout->setRowStretch(8, 999);
766
767  ogroup->setLayout(oLayout);
768
769  // RINEX Ephemeris
770  // ---------------
771  QGridLayout* eLayout = new QGridLayout;
772  eLayout->setColumnMinimumWidth(0,14*ww);
773  _ephIntrComboBox->setMaximumWidth(9*ww);
774  _ephOutPortLineEdit->setMaximumWidth(9*ww);
775
776  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
777  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
778  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
779  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
780  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
781  eLayout->addWidget(new QLabel("Port"),                          3, 0);
782  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
783  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
784  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
785  eLayout->addWidget(new QLabel("Version 3 filenames"),           4, 2);
786  eLayout->addWidget(_ephV3filenameCheckBox,                      4, 3);
787  eLayout->setRowStretch(5, 999);
788
789  egroup->setLayout(eLayout);
790
791
792  // Broadcast Corrections
793  // ---------------------
794  QGridLayout* cLayout = new QGridLayout;
795  cLayout->setColumnMinimumWidth(0,14*ww);
796  _corrIntrComboBox->setMaximumWidth(9*ww);
797  _corrPortLineEdit->setMaximumWidth(9*ww);
798
799  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
800  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
801  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
802  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
803  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
804  cLayout->addWidget(new QLabel("Port"),                          3, 0);
805  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
806  cLayout->addWidget(new QLabel(""),                              4, 1);
807  cLayout->setRowStretch(7, 999);
808  cgroup->setLayout(cLayout);
809
810  // Feed Engine
811  // -----------
812  QGridLayout* sLayout = new QGridLayout;
813  sLayout->setColumnMinimumWidth(0,14*ww);
814  _outPortLineEdit->setMaximumWidth(9*ww);
815  _outWaitSpinBox->setMaximumWidth(9*ww);
816  _outSamplSpinBox->setMaximumWidth(9*ww);
817  _outUPortLineEdit->setMaximumWidth(9*ww);
818
819  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
820  sLayout->addWidget(new QLabel("Port"),                            1, 0);
821  sLayout->addWidget(_outPortLineEdit,                              1, 1);
822  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
823  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
824  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
825  sLayout->addWidget(_outSamplSpinBox,                              2, 1, Qt::AlignLeft);
826  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
827  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
828  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
829  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
830  sLayout->addWidget(new QLabel(""),                                5, 1);
831  sLayout->setRowStretch(6, 999);
832
833  sgroup->setLayout(sLayout);
834
835  // Serial Output
836  // -------------
837  QGridLayout* serLayout = new QGridLayout;
838  serLayout->setColumnMinimumWidth(0,12*ww);
839  _serialBaudRateComboBox->setMaximumWidth(9*ww);
840  _serialFlowControlComboBox->setMaximumWidth(11*ww);
841  _serialDataBitsComboBox->setMaximumWidth(5*ww);
842  _serialParityComboBox->setMaximumWidth(9*ww);
843  _serialStopBitsComboBox->setMaximumWidth(5*ww);
844  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
845  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
846  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
847
848  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
849  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
850  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
851  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
852  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
853  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
854  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
855  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
856  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
857  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
858  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
859  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
860  serLayout->addWidget(_serialParityComboBox,                     4, 3);
861  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
862  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
863  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
864  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
865  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
866  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
867  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
868  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
869  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
870  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
871  serLayout->addWidget(new QLabel(""),                            6, 1);
872  serLayout->setRowStretch(7, 999);
873
874  sergroup->setLayout(serLayout);
875
876  // Outages
877  // -------
878  QGridLayout* aLayout = new QGridLayout;
879  aLayout->setColumnMinimumWidth(0,14*ww);
880  _adviseObsRateComboBox->setMaximumWidth(9*ww);
881  _adviseFailSpinBox->setMaximumWidth(9*ww);
882  _adviseRecoSpinBox->setMaximumWidth(9*ww);
883
884  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
885  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
886  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
887  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
888  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
889  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
890  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
891  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
892  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
893  aLayout->addWidget(new QLabel(""),                              5, 1);
894  aLayout->setRowStretch(6, 999);
895
896  agroup->setLayout(aLayout);
897
898  // Miscellaneous
899  // -------------
900  QGridLayout* rLayout = new QGridLayout;
901  rLayout->setColumnMinimumWidth(0,14*ww);
902  _miscIntrComboBox->setMaximumWidth(9*ww);
903  _miscPortLineEdit->setMaximumWidth(9*ww);
904
905  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
906  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
907  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
908  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
909  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
910  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
911  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
912  rLayout->addWidget(new QLabel("Port"),                          4, 0);
913  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
914  rLayout->addWidget(new QLabel(""),                              5, 1);
915  rLayout->setRowStretch(6, 999);
916
917  rgroup->setLayout(rLayout);
918
919  // PPP
920  // ---
921  _pppWidgets._dataSource->setMaximumWidth(15*ww);
922  _pppWidgets._corrMount->setMaximumWidth(15*ww);
923  _pppWidgets._nmeaPath->setMaximumWidth(35*ww);
924  _pppWidgets._logPath->setMaximumWidth(35*ww);
925  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
926  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
927  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
928  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
929
930  QGridLayout* pppLayout1 = new QGridLayout();
931  int ir = 0;
932  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output.<br>"), ir, 0, 1, 7, Qt::AlignLeft);
933  ++ir;
934  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
935  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
936  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 4);
937  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 5, 1, 3);
938  ++ir;
939  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
940  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
941  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 2);
942  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 3);
943  pppLayout1->addWidget(new QLabel("   Logfile directory"),  ir, 4);
944  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 5, 1, 3);
945  ++ir;
946  pppLayout1->addWidget(new QLabel("RINEX Obs file"),        ir, 0);
947  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 1);
948  pppLayout1->addWidget(new QLabel("RINEX Nav file"),        ir, 2);
949  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 3);
950  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 4);
951  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 5, 1, 3);
952  ++ir;
953  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
954  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
955  pppLayout1->addWidget(new QLabel("ANTEX file"),            ir, 2);
956  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 3);
957  pppLayout1->addWidget(new QLabel("   SNX TRO directory"),  ir, 4);
958  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 5, 1, 3);
959  ++ir;
960#ifdef USE_PPP
961  pppLayout1->addWidget(new QLabel("BLQ file"),              ir, 0);
962  pppLayout1->addWidget(_pppWidgets._blqFile,                ir, 1);
963#endif
964  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 4);
965  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 5);
966  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 6);
967  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 7, Qt::AlignRight);
968  ++ir;
969  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 4);
970  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 5);
971  pppLayout1->addWidget(new QLabel("   SNX TRO solution"),   ir, 6);
972  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 7, Qt::AlignRight);
973  pppLayout1->setRowStretch(ir+1, 999);
974  pppGroup1->setLayout(pppLayout1);
975
976  QVBoxLayout* pppLayout2 = new QVBoxLayout();
977  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
978  pppLayout2->addWidget(_pppWidgets._staTable, 99);
979  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
980  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
981  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
982  pppLayout2sub->addStretch(99);
983
984  pppLayout2->addLayout(pppLayout2sub);
985
986  pppGroup2->setLayout(pppLayout2);
987
988  QGridLayout* pppLayout3 = new QGridLayout();
989  ir = 0;
990  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
991  ++ir;
992  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
993  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
994  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
995  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
996  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
997  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
998  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
999  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
1000  ++ir;
1001  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
1002  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
1003  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
1004  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
1005  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
1006  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
1007  ++ir;
1008  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
1009  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
1010  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
1011  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
1012  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
1013  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
1014  ++ir;
1015  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
1016  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
1017  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
1018  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
1019  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
1020  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
1021  ++ir;
1022  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
1023  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
1024  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
1025  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
1026  ++ir;
1027  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
1028  pppLayout3->setColumnStretch(8, 999);
1029  ++ir;
1030  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
1031  pppLayout3->setRowStretch(ir, 999);
1032
1033  pppGroup3->setLayout(pppLayout3);
1034
1035  // ------------------------
1036  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1037  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
1038  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
1039
1040  QGridLayout* pppLayout4 = new QGridLayout();
1041  ir = 0;
1042  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
1043  ++ir;
1044  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
1045  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
1046  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
1047  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
1048  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
1049
1050  ++ir;
1051  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
1052  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
1053  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
1054  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
1055  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
1056  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
1057  ++ir;
1058  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
1059  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
1060  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
1061  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
1062  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
1063  ++ir;
1064  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
1065  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
1066  ++ir;
1067  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
1068  pppLayout4->setRowStretch(ir, 999);
1069
1070  pppGroup4->setLayout(pppLayout4);
1071
1072  // Reqc Processing
1073  // ---------------
1074  _reqcActionComboBox = new QComboBox();
1075  _reqcActionComboBox->setEditable(false);
1076  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1077  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1078  if (ik != -1) {
1079    _reqcActionComboBox->setCurrentIndex(ik);
1080  }
1081  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1082          this, SLOT(slotBncTextChanged()));
1083
1084  QGridLayout* reqcLayout = new QGridLayout;
1085  _reqcActionComboBox->setMinimumWidth(15*ww);
1086  _reqcActionComboBox->setMaximumWidth(20*ww);
1087
1088  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1089  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1090
1091  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1092  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1093  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1094  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1095  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1096  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1097  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1098
1099  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1100          this, SLOT(slotBncTextChanged()));
1101
1102  _reqcLogSummaryOnly = new QCheckBox();
1103  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1104
1105  ir = 0;
1106  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1107  ++ir;
1108  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1109  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1110  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1111  _reqcEditOptionButton->setMinimumWidth(15*ww);
1112  _reqcEditOptionButton->setMaximumWidth(20*ww);
1113
1114  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1115  ++ir;
1116  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1117  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1118  _reqcObsFileChooser->setMaximumWidth(40*ww);
1119  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1120  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1121  _reqcNavFileChooser->setMaximumWidth(40*ww);
1122  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1123  ++ir;
1124  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1125  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1126  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1127  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1128  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1129  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1130  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1131  ++ir;
1132  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1133  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1134  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1135  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1136  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1137  ++ir;
1138  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1139  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1140  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1141  ++ir;
1142  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1143  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1144  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1145  ++ir;
1146  reqcLayout->setRowStretch(ir, 999);
1147
1148  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1149  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1150
1151  reqcgroup->setLayout(reqcLayout);
1152
1153  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1154          this, SLOT(slotReqcEditOption()));
1155
1156  QGridLayout* sp3CompLayout = new QGridLayout;
1157
1158  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1159  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1160  _sp3CompFileChooser->setMinimumWidth(15*ww);
1161  _sp3CompFileChooser->setMaximumWidth(40*ww);
1162
1163  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1164  _sp3CompExclude->setMinimumWidth(18*ww);
1165  _sp3CompExclude->setMaximumWidth(18*ww);
1166
1167  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1168  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1169  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1170
1171  ir = 0;
1172  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1173  ++ir;
1174  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1175  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1176  ++ir;
1177  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1178  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1179  ++ir;
1180  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1181  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1182  ++ir;
1183  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1184  ++ir;
1185  sp3CompLayout->setRowStretch(ir, 999);
1186
1187  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1188  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1189
1190  sp3CompGroup->setLayout(sp3CompLayout);
1191
1192  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1193          this, SLOT(slotBncTextChanged()));
1194
1195  // Combine Corrections
1196  // -------------------
1197  QGridLayout* cmbLayout = new QGridLayout;
1198
1199  populateCmbTable();
1200  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1201  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1202  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1203  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1204  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1205  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1206  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1207  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1208  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1209  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1210  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1211  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1212  cmbLayout->setRowStretch(7, 999);
1213
1214  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1215  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1216
1217  cmbgroup->setLayout(cmbLayout);
1218
1219  // Upload Layout (Clocks)
1220  // ----------------------
1221  QGridLayout* uploadHlpLayout = new QGridLayout();
1222
1223  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1224  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1225  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1226
1227  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1228  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1229  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1230  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1231  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1232  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1233  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1234  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1235  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1236  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1237  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1238  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1239  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1240
1241  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1242  populateUploadTable();
1243
1244  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1245  uploadLayout->addWidget(_uploadTable);
1246  uploadLayout->addLayout(uploadHlpLayout);
1247
1248  uploadgroup->setLayout(uploadLayout);
1249
1250  // Upload Layout (Ephemeris)
1251  // -------------------------
1252  QGridLayout* uploadHlpLayoutEph = new QGridLayout();
1253
1254  connect(addUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadEphRow()));
1255  connect(delUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadEphRow()));
1256
1257  uploadHlpLayoutEph->addWidget(addUploadEphRowButton,               0, 0);
1258  uploadHlpLayoutEph->addWidget(delUploadEphRowButton,               0, 1);
1259  uploadHlpLayoutEph->addWidget(new QLabel("     Sampling"),         0, 2, Qt::AlignRight);
1260  uploadHlpLayoutEph->addWidget(_uploadSamplRtcmEphSpinBox,          0, 3);
1261
1262  QBoxLayout* uploadLayoutEph = new QBoxLayout(QBoxLayout::TopToBottom);
1263  populateUploadEphTable();
1264
1265  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"));
1266  uploadLayoutEph->addWidget(_uploadEphTable);
1267  uploadLayoutEph->addLayout(uploadHlpLayoutEph);
1268
1269  uploadEphgroup->setLayout(uploadLayoutEph);
1270
1271
1272  // Main Layout
1273  // -----------
1274  QGridLayout* mLayout = new QGridLayout;
1275  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1276  mLayout->addWidget(_aogroup,            0,0);
1277  mLayout->addWidget(_mountPointsTable,   1,0);
1278  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1279  mLayout->addWidget(_loggroup,           2,0);
1280
1281  _canvas->setLayout(mLayout);
1282
1283  // WhatsThis, Network
1284  // ------------------
1285  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet. <i>[key: proxyHost]</i></p>"));
1286  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC. <i>[key: proxyPort]</i></p>"));
1287  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443. <i>[key: sslCaCertPath]</i></p>"));
1288  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this. <i>[key: sslIgnoreErrors]</i></p>"));
1289
1290  // WhatsThis, General
1291  // ------------------
1292  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date. <i>[key: logFile]</i></p>"));
1293  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far. <i>[key: rnxAppend]</i></p>"));
1294  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals. The default entry is 'no' that means the reread function is switched of. <p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'. <i>[key: onTheFlyInterval]</i></p>"));
1295  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options. <i>[key: autoStart]</i></p>"));
1296  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes. <i>[key: rawOutFile]</i></p>"));
1297
1298  // WhatsThis, RINEX Observations
1299  // -----------------------------
1300  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files. <i>[key: rnxPath]</i></p>"));
1301  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file. <i>[key: rnxIntr]</i></p>"));
1302  _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files. <i>[key: rnxSampl]</i></p>"));
1303  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. <i>[key: rnxSkel]</i></p>"));
1304  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types. <i>[key: rnxOnlyWithSKL]</i></p>"));
1305  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems). <i>[key: rnxScript]</i></p>"));
1306  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'C:IQX I:ABCX' (System specific signal priorities for BDS and IRNSS) </li><li>'G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_'. <i>[key: rnxV2Priority]</i></p>"));
1307  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format. <i>[key: rnxV3]</i></p>"));
1308  _rnxV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format. <i>[key: rnxV3filenames]</i></p>"));
1309
1310  // WhatsThis, RINEX Ephemeris
1311  // --------------------------
1312  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files. <i>[key: ephPath]</i></p>"));
1313  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file. <i>[key: ephIntr]</i></p>"));
1314  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: ephOutPort]</i></p>"));
1315  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format. <i>[key: ephV3]</i></p>"));
1316  _ephV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format. <i>[key: ephV3filenames]</i></p>"));
1317
1318  // WhatsThis, RINEX Editing & QC
1319  // -----------------------------
1320  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program. <i>[key: reqcAction]</i></p>"));
1321  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1322  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory. <i>[key: reqcObsFile]</i></p>"));
1323  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory. <i>[key: reqcNavFile]</i></p>"));
1324  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced. <i>[key: reqcOutObsFile]</i></p>"));
1325  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced. <i>[key: reqcOutNavFile]</i></p>"));
1326  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced. <i>[key: reqcOutLogFile]</i></p>"));
1327  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information. <i>[key: reqcLogSummaryOnly]</i></p>"));
1328  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk. <i>[key: reqcPlotDir]</i></p>"));
1329  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default. <i>[key: reqcSkyPlotSignals]</i></p>"));
1330
1331  // WhatsThis, SP3 Comparison
1332  // -------------------------
1333  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma. <i>[key: sp3CompFile]</i></p>"));
1334  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison. <i>[key: sp3CompExclude]</i></p>"));
1335  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless. <i>[key: sp3CompOutLogFile]</i></p>"));
1336
1337  // WhatsThis, Broadcast Corrections
1338  // --------------------------------
1339  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files. <i>[key: corrPath]</i></p>"));
1340  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files. <i>[key: corrIntr]</i></p>"));
1341  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: corrPort]</i></p>"));
1342
1343  // WhatsThis, Feed Engine
1344  // ----------------------
1345  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outPort]</i></p>"));
1346  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product. <i>[key: outWait]</i></p>"));
1347  _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs. <i>[key: outSampl]</i></p>"));
1348  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams. <i>[key: outFile]</i></p>"));
1349  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outUPort]</i></p>"));
1350
1351  // WhatsThis, Serial Output
1352  // ------------------------
1353  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware. <i>[key: serialMountPoint]</i></p>"));
1354  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here. <i>[key: serialPortName]</i></p>"));
1355  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended. <i>[key: serialBaudRate]</i></p>"));
1356  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better. <i>[key: serialFlowControl]</i></p>"));
1357  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used. <i>[key: serialDataBits]</i></p>"));
1358  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'. <i>[key: serialParity]</i></p>"));
1359  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used. <i>[key: serialStopBits]</i></p>"));
1360  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file. <i>[key: serialAutoNMEA]</i></p>"));
1361  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk. <i>[key: serialFileNMEA]</i></p>"));
1362  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively. <i>[key: serialHeightNMEA]</i></p>"));
1363  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals. <i>[key: serialManualNMEASampling]</i></p>"));
1364
1365  // WhatsThis, Outages
1366  // ------------------
1367  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span. <i>[key: adviseObsRate]</i></p>"));
1368  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note. <i>[key: adviseFail]</i></p>"));
1369  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note. <i>[key: adviseReco]</i></p>"));
1370  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option. <i>[key: adviseScript]</i></p>"));
1371
1372  // WhatsThis, Miscellaneous
1373  // ------------------------
1374  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options. <i>[key: miscMount]</i></p>"));
1375  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information. <i>[key: miscIntr]</i></p>"));
1376  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types. <i>[key: miscScanRTCM]</i></p>"));
1377  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function. <i>[key: miscPort]</i></p>"));
1378
1379  // WhatsThis, PPP (1)
1380  // ------------------
1381  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations. <i>[key: PPP/dataSource]</i></p>"));
1382  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file. <i>[key: PPP/rinexObs]</i></p>"));
1383  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file. <i>[key: PPP/rinexNav]</i></p>"));
1384  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP. <i>[key: PPP/corrMount]</i></p>"));
1385  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP. <i>[key: PPP/corrFile]</i></p>"));
1386  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations. <i>[key: PPP/antexFile]</i></p>"));
1387  _pppWidgets._blqFile->setWhatsThis(tr("<p>Enter the full path to an ocean loading file in BLQ format. It contains a record for each site, which shows a header with information on the ocean tide model, the site name and the geographic coordinates. The first three rows of numbers designate amplitudes (meter), radial, west, south, and are followed by three lines with the corresponding phase values (degrees). <i>[key: PPP/blqFile]</i></p>"));
1388  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored. <i>[key: PPP/crdFile]</i></p>"));
1389  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames. <i>[key: PPP/v3filenames]</i></p>"));
1390  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced. <i>[key: PPP/logPath]</i></p>"));
1391  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced. <i>[key: PPP/nmeaPath]</i></p>"));
1392  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced. <i>[key: PPP/snxtroPath]</i></p>"));
1393  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'. <i>[key: PPP/snxtroIntr]</i></p>"));
1394  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk. <i>[key: PPP/snxtroSampl]</i></p>"));
1395  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files. <i>[key: PPP/snxtroAc]</i></p>"));
1396  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC. <i>[key: PPP/snxtroSol]</i></p>"));
1397
1398  // WhatsThis, PPP (3)
1399  // ------------------
1400  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data. <i>[key: PPP/lcGPS]</i></p>"));
1401  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data. <i>[key: PPP/lcGLONASS]</i></p>"));
1402  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data. <i>[key: PPP/lcGalileo]</i></p>"));
1403  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data. <i>[key: PPP/lcBDS]</i></p>"));
1404  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0' <i>[key: PPP/sigmaC1]</i></p>"));
1405  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01' <i>[key: PPP/sigmaL1]</i></p>"));
1406  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0' <i>[key: PPP/maxResC1]</i></p>"));
1407  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03' <i>[key: PPP/maxResL1]</i></p>"));
1408  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution. <i>[key: PPP/eleWgtCode]</i></p>"));
1409  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution. <i>[key: PPP/eleWgtPhase]</i></p>"));
1410  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum. <i>[key: PPP/minObs]</i></p>"));
1411  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations. <i>[key: PPP/minEle]</i></p>"));
1412
1413  // WhatsThis, Combine Corrections
1414  // ------------------------------
1415  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format. <i>[key: cmbStreams]</i></p>"));
1416  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1417  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1418  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning. <i>[key: cmbMethod]</i></p>"));
1419  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'. <i>[key: cmbMaxres]</i></p>"));
1420  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice. <i>[key: cmbSampl]</i></p>"));
1421  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination. <i>[key: cmbUseGlonass]</i></p>"));
1422
1423  // WhatsThis, Upload Corrections
1424  // -----------------------------
1425  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table. <i>[key: uploadMountpointsOut]</i></p>"));
1426  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1427  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Corrections' table.</p>"));
1428  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files. <i>[key: uploadIntr]</i></p>"));
1429  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages. <i>[key: uploadSamplRtcmEphCorr]</i></p>"));
1430  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files. <i>[key: uploadSamplSp3]</i></p>"));
1431  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files. <i>[key: uploadSamplClkRnx]</i></p>"));
1432  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1433  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs. <i>[key: uploadAntexFile]</i></p>"));
1434
1435  // WhatsThis, Upload Ephemeris
1436  // ---------------------------
1437  _uploadEphTable->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the respective stream. <i>[key: uploadEphHost]</i></p>"));
1438  addUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Ephemeris' table.</p>"));
1439  delUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Ephemeris' table.</p>"));
1440  _uploadSamplRtcmEphSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds. <i>[key: uploadSamplRtcmEph]</i></p>"));
1441
1442  // WhatsThis, Streams Canvas
1443  // -------------------------
1444  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. <i>[key: mountPoints]</i></p>"));
1445  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1446  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1447  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1448  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1449  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1450
1451  // WhatsThis, Log Canvas
1452  // ---------------------
1453  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1454  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1455  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1456  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1457
1458
1459  // Enable/Disable all Widgets
1460  // --------------------------
1461  slotBncTextChanged();
1462  enableStartStop();
1463
1464  // Auto start
1465  // ----------
1466  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1467    slotStart();
1468  }
1469}
1470
1471// Destructor
1472////////////////////////////////////////////////////////////////////////////
1473bncWindow::~bncWindow() {
1474  if (_caster) {
1475    delete _caster; BNC_CORE->setCaster(0);
1476  }
1477  if (_casterEph) {
1478    delete _casterEph;
1479  }
1480  delete _bncFigureLate;
1481  delete _bncFigurePPP;
1482  delete _actHelp;
1483  delete _actAbout;
1484  delete _actFlowchart;
1485  delete _actFontSel;
1486  delete _actSaveOpt;
1487  delete _actQuit;
1488  delete _actAddMountPoints;
1489  delete _actDeleteMountPoints;
1490  delete _actMapMountPoints;
1491  delete _actStart;
1492  delete _actStop;
1493  delete _actwhatsthis;
1494  delete _proxyHostLineEdit;
1495  delete _proxyPortLineEdit;
1496  delete _sslCaCertPathLineEdit;
1497  delete _sslIgnoreErrorsCheckBox;
1498  delete _logFileLineEdit;
1499  delete _rawOutFileLineEdit;
1500  delete _rnxAppendCheckBox;
1501  delete _onTheFlyComboBox;
1502  delete _autoStartCheckBox;
1503  delete _rnxPathLineEdit;
1504  delete _rnxIntrComboBox;
1505  delete _rnxSamplSpinBox;
1506  delete _rnxFileCheckBox;
1507  delete _rnxSkelLineEdit;
1508  delete _rnxScrpLineEdit;
1509  delete _rnxV3CheckBox;
1510  delete _rnxV3filenameCheckBox;
1511  delete _rnxV2Priority;
1512  delete _ephPathLineEdit;
1513  delete _ephIntrComboBox;
1514  delete _ephOutPortLineEdit;
1515  delete _ephV3CheckBox;
1516  delete _ephV3filenameCheckBox;
1517  delete _corrPathLineEdit;
1518  delete _corrIntrComboBox;
1519  delete _corrPortLineEdit;
1520  delete _outPortLineEdit;
1521  delete _outWaitSpinBox;
1522  delete _outSamplSpinBox;
1523  delete _outFileLineEdit;
1524  delete _outUPortLineEdit;
1525  delete _serialMountPointLineEdit;
1526  delete _serialPortNameLineEdit;
1527  delete _serialBaudRateComboBox;
1528  delete _serialFlowControlComboBox;
1529  delete _serialDataBitsComboBox;
1530  delete _serialParityComboBox;
1531  delete _serialStopBitsComboBox;
1532  delete _serialAutoNMEAComboBox;
1533  delete _serialFileNMEALineEdit;
1534  delete _serialHeightNMEALineEdit;
1535  delete _serialManualNMEASamplingSpinBox;
1536  delete _adviseObsRateComboBox;
1537  delete _adviseFailSpinBox;
1538  delete _adviseRecoSpinBox;
1539  delete _adviseScriptLineEdit;
1540  delete _miscMountLineEdit;
1541  delete _miscPortLineEdit;
1542  delete _miscIntrComboBox;
1543  delete _miscScanRTCMCheckBox;
1544  _mountPointsTable->deleteLater();
1545  delete _log;
1546  delete _loggroup;
1547  _cmbTable->deleteLater();
1548  delete _cmbMaxresLineEdit;
1549  delete _cmbUseGlonass;
1550  delete _cmbSamplSpinBox;
1551  delete _cmbMethodComboBox;;
1552  _uploadEphTable->deleteLater();
1553  delete _uploadSamplRtcmEphCorrSpinBox;
1554  _uploadTable->deleteLater();
1555  delete _uploadIntrComboBox;
1556  delete _uploadAntexFile;
1557  delete _uploadSamplRtcmEphSpinBox;
1558  delete _uploadSamplSp3SpinBox;
1559  delete _uploadSamplClkRnxSpinBox;
1560  delete _reqcActionComboBox;
1561  delete _reqcObsFileChooser;
1562  delete _reqcNavFileChooser;
1563  delete _reqcOutObsLineEdit;
1564  delete _reqcOutNavLineEdit;
1565  delete _reqcOutLogLineEdit;
1566  delete _reqcPlotDirLineEdit;
1567  delete _reqcSkyPlotSignals;
1568  delete _reqcLogSummaryOnly;
1569  delete _reqcEditOptionButton;
1570  delete _sp3CompFileChooser;
1571  delete _sp3CompExclude;
1572  delete _sp3CompLogLineEdit;
1573  //delete _canvas;
1574}
1575
1576//
1577////////////////////////////////////////////////////////////////////////////
1578void bncWindow::populateMountPointsTable() {
1579
1580  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1581    _mountPointsTable->removeRow(iRow);
1582  }
1583
1584  bncSettings settings;
1585
1586  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1587  int iRow = 0;
1588  while (it.hasNext()) {
1589    QStringList hlp = it.next().split(" ");
1590    if (hlp.size() < 7) continue;
1591    _mountPointsTable->insertRow(iRow);
1592
1593    QUrl    url(hlp[0]);
1594
1595    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1596    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1597    QString nmea(hlp[5]);
1598    if (hlp[6] == "S") {
1599      fullPath = hlp[0].replace(0,2,"");
1600    }
1601    QString ntripVersion = "2";
1602    if (hlp.size() >= 7) {
1603      ntripVersion = (hlp[6]);
1604    }
1605
1606    QTableWidgetItem* it;
1607    it = new QTableWidgetItem(url.userInfo());
1608    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1609    _mountPointsTable->setItem(iRow, 0, it);
1610
1611    it = new QTableWidgetItem(fullPath);
1612    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1613    _mountPointsTable->setItem(iRow, 1, it);
1614
1615    it = new QTableWidgetItem(format);
1616    _mountPointsTable->setItem(iRow, 2, it);
1617
1618    it = new QTableWidgetItem(country);
1619    _mountPointsTable->setItem(iRow, 3, it);
1620
1621    if      (nmea == "yes") {
1622      it = new QTableWidgetItem(latitude);
1623      _mountPointsTable->setItem(iRow, 4, it);
1624      it = new QTableWidgetItem(longitude);
1625      _mountPointsTable->setItem(iRow, 5, it);
1626    } else {
1627      it = new QTableWidgetItem(latitude);
1628      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1629      _mountPointsTable->setItem(iRow, 4, it);
1630
1631      it = new QTableWidgetItem(longitude);
1632      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1633      _mountPointsTable->setItem(iRow, 5, it);
1634    }
1635
1636    it = new QTableWidgetItem(nmea);
1637    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1638    _mountPointsTable->setItem(iRow, 6, it);
1639
1640    it = new QTableWidgetItem(ntripVersion);
1641    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1642    _mountPointsTable->setItem(iRow, 7, it);
1643
1644    bncTableItem* bncIt = new bncTableItem();
1645    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1646    _mountPointsTable->setItem(iRow, 8, bncIt);
1647
1648    iRow++;
1649  }
1650
1651  _mountPointsTable->sortItems(1);
1652
1653  enableStartStop();
1654}
1655
1656// Retrieve Table
1657////////////////////////////////////////////////////////////////////////////
1658void bncWindow::slotAddMountPoints() {
1659
1660  bncSettings settings;
1661  QString proxyHost = settings.value("proxyHost").toString();
1662  int     proxyPort = settings.value("proxyPort").toInt();
1663  if (proxyHost != _proxyHostLineEdit->text()         ||
1664      proxyPort != _proxyPortLineEdit->text().toInt()) {
1665    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1666                                     "changed. Use the new ones?",
1667                                     QMessageBox::Yes, QMessageBox::No,
1668                                     QMessageBox::NoButton);
1669    if      (iRet == QMessageBox::Yes) {
1670      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1671      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1672    }
1673  }
1674
1675  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1676  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1677
1678  QMessageBox msgBox;
1679  msgBox.setIcon(QMessageBox::Question);
1680  msgBox.setWindowTitle("Add Stream");
1681  msgBox.setText("Add stream(s) coming from:");
1682
1683  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1684  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1685  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1686  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1687  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1688
1689  msgBox.exec();
1690
1691  if (msgBox.clickedButton() == buttonNtrip) {
1692    bncTableDlg* dlg = new bncTableDlg(this);
1693    dlg->move(this->pos().x()+50, this->pos().y()+50);
1694    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1695          this, SLOT(slotNewMountPoints(QStringList*)));
1696    dlg->exec();
1697    delete dlg;
1698  } else if (msgBox.clickedButton() == buttonIP) {
1699    bncIpPort* ipp = new bncIpPort(this);
1700    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1701          this, SLOT(slotNewMountPoints(QStringList*)));
1702    ipp->exec();
1703    delete ipp;
1704  } else if (msgBox.clickedButton() == buttonUDP) {
1705    bncUdpPort* udp = new bncUdpPort(this);
1706    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1707          this, SLOT(slotNewMountPoints(QStringList*)));
1708    udp->exec();
1709    delete udp;
1710  } else if (msgBox.clickedButton() == buttonSerial) {
1711    bncSerialPort* sep = new bncSerialPort(this);
1712    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1713          this, SLOT(slotNewMountPoints(QStringList*)));
1714    sep->exec();
1715    delete sep;
1716  } else if (msgBox.clickedButton() == buttonCancel) {
1717    // Cancel
1718  }
1719
1720  enableStartStop();
1721}
1722
1723// Delete Selected Mount Points
1724////////////////////////////////////////////////////////////////////////////
1725void bncWindow::slotDeleteMountPoints() {
1726
1727  int nRows = _mountPointsTable->rowCount();
1728  bool flg[nRows];
1729  for (int iRow = 0; iRow < nRows; iRow++) {
1730    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1731      flg[iRow] = true;
1732    }
1733    else {
1734      flg[iRow] = false;
1735    }
1736  }
1737  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1738    if (flg[iRow]) {
1739      _mountPointsTable->removeRow(iRow);
1740    }
1741  }
1742  _actDeleteMountPoints->setEnabled(false);
1743
1744  enableStartStop();
1745}
1746
1747// New Mount Points Selected
1748////////////////////////////////////////////////////////////////////////////
1749void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1750  int iRow = 0;
1751  QListIterator<QString> it(*mountPoints);
1752  while (it.hasNext()) {
1753    QStringList hlp = it.next().split(" ");
1754    QUrl    url(hlp[0]);
1755    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1756    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1757    QString nmea(hlp[5]);
1758    if (hlp[6] == "S") {
1759      fullPath = hlp[0].replace(0,2,"");
1760    }
1761    QString ntripVersion = "2";
1762    if (hlp.size() >= 7) {
1763      ntripVersion = (hlp[6]);
1764    }
1765
1766    _mountPointsTable->insertRow(iRow);
1767
1768    QTableWidgetItem* it;
1769    it = new QTableWidgetItem(url.userInfo());
1770    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1771    _mountPointsTable->setItem(iRow, 0, it);
1772
1773    it = new QTableWidgetItem(fullPath);
1774    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1775    _mountPointsTable->setItem(iRow, 1, it);
1776
1777    it = new QTableWidgetItem(format);
1778    _mountPointsTable->setItem(iRow, 2, it);
1779
1780    it = new QTableWidgetItem(country);
1781    _mountPointsTable->setItem(iRow, 3, it);
1782
1783    if      (nmea == "yes") {
1784    it = new QTableWidgetItem(latitude);
1785    _mountPointsTable->setItem(iRow, 4, it);
1786    it = new QTableWidgetItem(longitude);
1787    _mountPointsTable->setItem(iRow, 5, it);
1788    } else {
1789    it = new QTableWidgetItem(latitude);
1790    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1791    _mountPointsTable->setItem(iRow, 4, it);
1792    it = new QTableWidgetItem(longitude);
1793    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1794    _mountPointsTable->setItem(iRow, 5, it);
1795    }
1796
1797    it = new QTableWidgetItem(nmea);
1798    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1799    _mountPointsTable->setItem(iRow, 6, it);
1800
1801    it = new QTableWidgetItem(ntripVersion);
1802    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1803    _mountPointsTable->setItem(iRow, 7, it);
1804
1805    bncTableItem* bncIt = new bncTableItem();
1806    _mountPointsTable->setItem(iRow, 8, bncIt);
1807
1808    iRow++;
1809  }
1810  _mountPointsTable->hideColumn(0);
1811  _mountPointsTable->hideColumn(3);
1812  _mountPointsTable->sortItems(1);
1813  delete mountPoints;
1814
1815  enableStartStop();
1816}
1817
1818// Save Options (serialize)
1819////////////////////////////////////////////////////////////////////////////
1820void bncWindow::slotSaveOptions() {
1821  saveOptions();
1822  bncSettings settings;
1823  settings.sync();
1824}
1825
1826// Save Options (memory only)
1827////////////////////////////////////////////////////////////////////////////
1828void bncWindow::saveOptions() {
1829
1830  QStringList mountPoints;
1831  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1832
1833    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1834      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1835                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1836
1837      mountPoints.append(url.toString() + " " +
1838                         _mountPointsTable->item(iRow, 2)->text()
1839                 + " " + _mountPointsTable->item(iRow, 3)->text()
1840                 + " " + _mountPointsTable->item(iRow, 4)->text()
1841                 + " " + _mountPointsTable->item(iRow, 5)->text()
1842                 + " " + _mountPointsTable->item(iRow, 6)->text()
1843                 + " " + _mountPointsTable->item(iRow, 7)->text());
1844    } else {
1845      mountPoints.append(
1846                  "//" + _mountPointsTable->item(iRow, 1)->text()
1847                 + " " + _mountPointsTable->item(iRow, 2)->text()
1848                 + " " + _mountPointsTable->item(iRow, 3)->text()
1849                 + " " + _mountPointsTable->item(iRow, 4)->text()
1850                 + " " + _mountPointsTable->item(iRow, 5)->text()
1851                 + " " + _mountPointsTable->item(iRow, 6)->text()
1852                 + " " + _mountPointsTable->item(iRow, 7)->text());
1853    }
1854  }
1855
1856  QStringList cmbStreams;
1857  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1858    QString hlp;
1859    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1860      if (_cmbTable->item(iRow, iCol)) {
1861        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1862      }
1863    }
1864    if (!hlp.isEmpty()) {
1865      cmbStreams << hlp;
1866    }
1867  }
1868
1869  QStringList uploadMountpointsOut;
1870  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1871    QString hlp;
1872    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1873      if (_uploadTable->cellWidget(iRow, iCol) &&
1874          (iCol == 3 || iCol == 4 || iCol == 5)) {
1875        if      (iCol == 3) {
1876          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1877          hlp += passwd->text() + ",";
1878        }
1879        else if (iCol == 4) {
1880          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1881          hlp += system->currentText() + ",";
1882        }
1883        else if (iCol == 5) {
1884          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1885          QString state; state.setNum(com->checkState());
1886          hlp +=  state + ",";
1887        }
1888      }
1889      else if (_uploadTable->item(iRow, iCol)) {
1890        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1891      }
1892    }
1893    if (!hlp.isEmpty()) {
1894      uploadMountpointsOut << hlp;
1895    }
1896  }
1897
1898  QStringList uploadEphMountpointsOut;
1899  for (int iRow = 0; iRow < _uploadEphTable->rowCount(); iRow++) {
1900    QString hlp;
1901    for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
1902      if (_uploadEphTable->cellWidget(iRow, iCol) &&
1903          (iCol == 3 || iCol == 4)) {
1904        if      (iCol == 3) {
1905          QLineEdit* passwd = (QLineEdit*)(_uploadEphTable->cellWidget(iRow, iCol));
1906          hlp += passwd->text() + ",";
1907        }
1908        else if (iCol == 4) {
1909          QComboBox* system = (QComboBox*)(_uploadEphTable->cellWidget(iRow, iCol));
1910          hlp += system->currentText() + ",";
1911        }
1912      }
1913      else if (_uploadEphTable->item(iRow, iCol)) {
1914        hlp += _uploadEphTable->item(iRow, iCol)->text() + ",";
1915      }
1916    }
1917    if (!hlp.isEmpty()) {
1918      uploadEphMountpointsOut << hlp;
1919    }
1920  }
1921
1922  bncSettings settings;
1923
1924  settings.setValue("startTab",    _aogroup->currentIndex());
1925  settings.setValue("statusTab",   _loggroup->currentIndex());
1926  settings.setValue("mountPoints", mountPoints);
1927// Network
1928  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1929  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1930  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1931  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1932// General
1933  settings.setValue("logFile",     _logFileLineEdit->text());
1934  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1935  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1936  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1937  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1938// RINEX Observations
1939  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1940  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1941  settings.setValue("rnxSampl",    _rnxSamplSpinBox->value());
1942  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1943  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1944  settings.setValue("rnxV3filenames",_rnxV3filenameCheckBox->checkState());
1945  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1946  (_rnxV3filenameCheckBox->checkState()) ?
1947    settings.setValue("rnxV3",       _rnxV3filenameCheckBox->checkState()) :
1948    settings.setValue("rnxV3",       _rnxV3CheckBox->checkState());
1949  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1950// RINEX Ephemeris
1951  settings.setValue("ephPath",       _ephPathLineEdit->text());
1952  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1953  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1954  settings.setValue("ephV3filenames", _ephV3filenameCheckBox->checkState());
1955  (_ephV3filenameCheckBox->checkState()) ?
1956    settings.setValue("ephV3",       _ephV3filenameCheckBox->checkState()) :
1957    settings.setValue("ephV3",       _ephV3CheckBox->checkState());
1958// Broadcast Corrections
1959  settings.setValue("corrPath",    _corrPathLineEdit->text());
1960  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1961  settings.setValue("corrPort",    _corrPortLineEdit->text());
1962// Feed Engine
1963  settings.setValue("outPort",     _outPortLineEdit->text());
1964  settings.setValue("outWait",     _outWaitSpinBox->value());
1965  settings.setValue("outSampl",    _outSamplSpinBox->value());
1966  settings.setValue("outFile",     _outFileLineEdit->text());
1967  settings.setValue("outUPort",    _outUPortLineEdit->text());
1968// Serial Output
1969  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1970  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1971  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1972  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1973  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1974  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1975  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1976  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1977  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1978  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1979  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1980// Outages
1981  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1982  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1983  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1984  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1985// Miscellaneous
1986  settings.setValue("miscMount",   _miscMountLineEdit->text());
1987  settings.setValue("miscPort",    _miscPortLineEdit->text());
1988  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1989  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1990// Reqc
1991  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1992  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1993  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1994  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1995  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1996  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1997  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1998  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1999  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
2000// SP3 Comparison
2001  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
2002  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
2003  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
2004// Combine Corrections
2005  if (!cmbStreams.isEmpty()) {
2006    settings.setValue("cmbStreams", cmbStreams);
2007  }
2008  else {
2009    settings.setValue("cmbStreams", "");
2010  }
2011  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
2012  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
2013  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
2014  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
2015// Upload Corrections
2016  if (!uploadMountpointsOut.isEmpty()) {
2017    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
2018  }
2019  else {
2020    settings.setValue("uploadMountpointsOut", "");
2021  }
2022  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
2023  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
2024  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
2025  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
2026  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
2027// Upload Ephemeris
2028  if (!uploadEphMountpointsOut.isEmpty()) {
2029    settings.setValue("uploadEphMountpointsOut", uploadEphMountpointsOut);
2030  }
2031  else {
2032    settings.setValue("uploadEphMountpointsOut", "");
2033  }
2034  settings.setValue("uploadSamplRtcmEph", _uploadSamplRtcmEphSpinBox->value());
2035
2036  if (_caster) {
2037    _caster->readMountPoints();
2038  }
2039
2040  _pppWidgets.saveOptions();
2041}
2042
2043// All get slots terminated
2044////////////////////////////////////////////////////////////////////////////
2045void bncWindow::slotGetThreadsFinished() {
2046  BNC_CORE->slotMessage("All Get Threads Terminated", true);
2047  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2048  delete _casterEph; _casterEph = 0;
2049  _runningRealTime = false;
2050}
2051
2052// Start It!
2053////////////////////////////////////////////////////////////////////////////
2054void bncWindow::slotStart() {
2055  saveOptions();
2056  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
2057    _runningPPP = true;
2058    enableStartStop();
2059    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
2060    BNC_CORE->startPPP();
2061    _bncFigurePPP->reset();
2062  }
2063  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2064    if (_reqcActionComboBox->currentText() == "Analyze") {
2065      _runningQC = true;
2066      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2067      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2068      reqcAnalyze->start();
2069    }
2070    else {
2071      _runningEdit = true;
2072      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2073      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2074      reqcEdit->start();
2075    }
2076    enableStartStop();
2077  }
2078  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
2079    _runningSp3Comp = true;
2080    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2081    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2082    sp3Comp->start();
2083    enableStartStop();
2084  }
2085  else {
2086    startRealTime();
2087    BNC_CORE->startPPP();
2088  }
2089}
2090
2091// Start Real-Time (Retrieve Data etc.)
2092////////////////////////////////////////////////////////////////////////////
2093void bncWindow::startRealTime() {
2094
2095  _runningRealTime = true;
2096
2097  _bncFigurePPP->reset();
2098
2099  _actDeleteMountPoints->setEnabled(false);
2100
2101  enableStartStop();
2102
2103  _caster = new bncCaster();
2104
2105  BNC_CORE->setCaster(_caster);
2106  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2107  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2108  BNC_CORE->initCombination();
2109
2110  connect(_caster, SIGNAL(getThreadsFinished()),
2111          this, SLOT(slotGetThreadsFinished()));
2112
2113  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2114           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2115
2116  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " (" BNC_OS ") ==========", true);
2117
2118  bncSettings settings;
2119
2120  // Active panels
2121  // -------------
2122  if (!_rnxPathLineEdit->text().isEmpty())
2123      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2124  if (!_ephPathLineEdit->text().isEmpty())
2125      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2126  if (!_corrPathLineEdit->text().isEmpty())
2127      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2128  if (!_outPortLineEdit->text().isEmpty())
2129      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2130  if (!_serialMountPointLineEdit->text().isEmpty())
2131      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2132  if (!_adviseObsRateComboBox->currentText().isEmpty())
2133      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2134  if (!_miscMountLineEdit->text().isEmpty())
2135      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2136  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2137      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2138  if (_cmbTable->rowCount() > 0)
2139      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2140  if (_uploadTable->rowCount() > 0)
2141      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2142  if (_uploadEphTable->rowCount() > 0)
2143      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2144
2145  QDir rnxdir(settings.value("rnxPath").toString());
2146  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2147
2148  QString rnx_file = settings.value("rnxScript").toString();
2149  if ( !rnx_file.isEmpty() ) {
2150    QFile rnxfile(settings.value("rnxScript").toString());
2151    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2152  }
2153
2154  QDir ephdir(settings.value("ephPath").toString());
2155  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2156
2157  QDir corrdir(settings.value("corrPath").toString());
2158  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2159
2160  QString advise_file = settings.value("adviseScript").toString();
2161  if ( !advise_file.isEmpty() ) {
2162    QFile advisefile(settings.value("adviseScript").toString());
2163    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2164  }
2165
2166  _caster->readMountPoints();
2167
2168  _casterEph = new bncEphUploadCaster();
2169}
2170
2171// Retrieve Data
2172////////////////////////////////////////////////////////////////////////////
2173void bncWindow::slotStop() {
2174  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2175                                   QMessageBox::Yes, QMessageBox::No,
2176                                   QMessageBox::NoButton);
2177  if (iRet == QMessageBox::Yes) {
2178    BNC_CORE->stopPPP();
2179    BNC_CORE->stopCombination();
2180    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2181    delete _casterEph; _casterEph = 0;
2182    _runningRealTime = false;
2183    _runningPPP      = false;
2184    enableStartStop();
2185  }
2186}
2187
2188// Close Application gracefully
2189////////////////////////////////////////////////////////////////////////////
2190void bncWindow::closeEvent(QCloseEvent* event) {
2191
2192  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2193                                   QMessageBox::Yes, QMessageBox::No,
2194                                   QMessageBox::Cancel);
2195
2196  if      (iRet == QMessageBox::Cancel) {
2197    event->ignore();
2198    return;
2199  }
2200  else if (iRet == QMessageBox::Yes) {
2201    slotSaveOptions();
2202  }
2203
2204  BNC_CORE->stopPPP();
2205
2206  QMainWindow::closeEvent(event);
2207}
2208
2209// User changed the selection of mountPoints
2210////////////////////////////////////////////////////////////////////////////
2211void bncWindow::slotSelectionChanged() {
2212  if (_mountPointsTable->selectedItems().isEmpty()) {
2213    _actDeleteMountPoints->setEnabled(false);
2214  }
2215  else {
2216    _actDeleteMountPoints->setEnabled(true);
2217  }
2218}
2219
2220// Display Program Messages
2221////////////////////////////////////////////////////////////////////////////
2222void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2223  if (showOnScreen ) {
2224    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2225  }
2226}
2227
2228// About Message
2229////////////////////////////////////////////////////////////////////////////
2230void bncWindow::slotAbout() {
2231 new bncAboutDlg(0);
2232}
2233
2234//Flowchart
2235////////////////////////////////////////////////////////////////////////////
2236void bncWindow::slotFlowchart() {
2237 new bncFlowchartDlg(0);
2238}
2239
2240// Help Window
2241////////////////////////////////////////////////////////////////////////////
2242void bncWindow::slotHelp() {
2243  QUrl url = QUrl::fromLocalFile(":/bnchelp.html");
2244  new bncHlpDlg(0, url);
2245}
2246
2247// Select Fonts
2248////////////////////////////////////////////////////////////////////////////
2249void bncWindow::slotFontSel() {
2250  bool ok;
2251  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2252  if (ok) {
2253    bncSettings settings;
2254    settings.setValue("font", newFont.toString());
2255    QApplication::setFont(newFont);
2256    int ww = QFontMetrics(newFont).width('w');
2257    setMinimumSize(60*ww, 80*ww);
2258    resize(60*ww, 80*ww);
2259  }
2260}
2261
2262// Whats This Help
2263void bncWindow::slotWhatsThis() {
2264  QWhatsThis::enterWhatsThisMode();
2265}
2266
2267//
2268////////////////////////////////////////////////////////////////////////////
2269void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2270  _threads = threads;
2271
2272  _bncFigure->updateMountPoints();
2273  _bncFigureLate->updateMountPoints();
2274
2275  populateMountPointsTable();
2276  bncSettings settings;
2277  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2278  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2279  QListIterator<bncGetThread*> iTh(threads);
2280  while (iTh.hasNext()) {
2281    bncGetThread* thread = iTh.next();
2282    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2283      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2284                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2285      if (url                                      == thread->mountPoint() &&
2286          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2287          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2288        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2289        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2290                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2291        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2292                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2293        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2294                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2295        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2296                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2297        break;
2298      }
2299    }
2300  }
2301}
2302
2303//
2304////////////////////////////////////////////////////////////////////////////
2305void bncWindow::CreateMenu() {
2306  // Create Menus
2307  // ------------
2308  _menuFile = menuBar()->addMenu(tr("&File"));
2309  _menuFile->addAction(_actFontSel);
2310  _menuFile->addSeparator();
2311  _menuFile->addAction(_actSaveOpt);
2312  _menuFile->addSeparator();
2313  _menuFile->addAction(_actQuit);
2314
2315  _menuHlp = menuBar()->addMenu(tr("&Help"));
2316  _menuHlp->addAction(_actHelp);
2317  _menuHlp->addAction(_actFlowchart);
2318  _menuHlp->addAction(_actAbout);
2319}
2320
2321// Toolbar
2322////////////////////////////////////////////////////////////////////////////
2323void bncWindow::AddToolbar() {
2324  QToolBar* toolBar = new QToolBar;
2325  addToolBar(Qt::BottomToolBarArea, toolBar);
2326  toolBar->setMovable(false);
2327  toolBar->addAction(_actAddMountPoints);
2328  toolBar->addAction(_actDeleteMountPoints);
2329  toolBar->addAction(_actMapMountPoints);
2330  toolBar->addAction(_actStart);
2331  toolBar->addAction(_actStop);
2332  toolBar->addWidget(new QLabel("                                           "));
2333  toolBar->addAction(_actwhatsthis);
2334}
2335
2336// About
2337////////////////////////////////////////////////////////////////////////////
2338bncAboutDlg::bncAboutDlg(QWidget* parent) :
2339   QDialog(parent) {
2340
2341  QTextBrowser* tb = new QTextBrowser;
2342  QUrl url = QUrl::fromLocalFile(":/bncabout.html");
2343  tb->setSource(url);
2344  tb->setReadOnly(true);
2345
2346  int ww = QFontMetrics(font()).width('w');
2347  QPushButton* _closeButton = new QPushButton("Close");
2348  _closeButton->setMaximumWidth(10*ww);
2349  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2350
2351  QGridLayout* dlgLayout = new QGridLayout();
2352  QLabel* img = new QLabel();
2353  img->setPixmap(QPixmap(":ntrip-logo.png"));
2354  dlgLayout->addWidget(img, 0,0);
2355  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version " BNCVERSION), 0,1);
2356  dlgLayout->addWidget(tb,1,0,1,2);
2357  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2358
2359  setLayout(dlgLayout);
2360  resize(60*ww, 60*ww);
2361  setWindowTitle("About BNC");
2362  show();
2363}
2364
2365//
2366////////////////////////////////////////////////////////////////////////////
2367bncAboutDlg::~bncAboutDlg() {
2368
2369};
2370
2371// Flowchart
2372////////////////////////////////////////////////////////////////////////////
2373bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2374   QDialog(parent) {
2375
2376  int ww = QFontMetrics(font()).width('w');
2377  QPushButton* _closeButton = new QPushButton("Close");
2378  _closeButton->setMaximumWidth(10*ww);
2379  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2380
2381  QGridLayout* dlgLayout = new QGridLayout();
2382  QLabel* img = new QLabel();
2383  img->setPixmap(QPixmap(":bncflowchart.png"));
2384  dlgLayout->addWidget(img, 0,0);
2385  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2386
2387  setLayout(dlgLayout);
2388  setWindowTitle("Flow Chart");
2389  show();
2390}
2391
2392//
2393////////////////////////////////////////////////////////////////////////////
2394bncFlowchartDlg::~bncFlowchartDlg() {
2395};
2396
2397// Enable/Disable Widget (and change its color)
2398////////////////////////////////////////////////////////////////////////////
2399void bncWindow::enableWidget(bool enable, QWidget* widget) {
2400
2401  const static QPalette paletteWhite(QColor(255, 255, 255));
2402  const static QPalette paletteGray(QColor(230, 230, 230));
2403
2404  widget->setEnabled(enable);
2405  if (enable) {
2406    widget->setPalette(paletteWhite);
2407  }
2408  else {
2409    widget->setPalette(paletteGray);
2410  }
2411}
2412
2413//  Bnc Text
2414////////////////////////////////////////////////////////////////////////////
2415void bncWindow::slotBncTextChanged(){
2416
2417  const static QPalette paletteWhite(QColor(255, 255, 255));
2418  const static QPalette paletteGray(QColor(230, 230, 230));
2419
2420  bool enable = true;
2421
2422  // Proxy
2423  //------
2424  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2425    enable = !_proxyHostLineEdit->text().isEmpty();
2426    enableWidget(enable, _proxyPortLineEdit);
2427  }
2428
2429  // RINEX Observations
2430  // ------------------
2431  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2432    enable = !_rnxPathLineEdit->text().isEmpty();
2433    enableWidget(enable, _rnxIntrComboBox);
2434    enableWidget(enable, _rnxSamplSpinBox);
2435    enableWidget(enable, _rnxSkelLineEdit);
2436    enableWidget(enable, _rnxFileCheckBox);
2437    enableWidget(enable, _rnxScrpLineEdit);
2438    enableWidget(enable, _rnxV2Priority);
2439    enableWidget(enable, _rnxV3CheckBox);
2440
2441    bool enable1 = true;
2442    enable1 = _rnxV3CheckBox->isChecked();
2443    if (enable && enable1) {
2444      enableWidget(false, _rnxV2Priority);
2445    }
2446    if (enable && !enable1) {
2447      enableWidget(true, _rnxV2Priority);
2448    }
2449  }
2450
2451  // RINEX Observations, Signal Priority
2452  // -----------------------------------
2453  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2454    if (!_rnxPathLineEdit->text().isEmpty()) {
2455      enableWidget(enable, _rnxIntrComboBox);
2456      enable = !_rnxV3CheckBox->isChecked();
2457      enableWidget(enable, _rnxV2Priority);
2458    }
2459  }
2460
2461  // RINEX Ephemeris
2462  // ---------------
2463  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2464    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2465    enableWidget(enable, _ephIntrComboBox);
2466    enableWidget(enable, _ephV3CheckBox);
2467    enableWidget(enable, _ephV3filenameCheckBox);
2468  }
2469
2470  // Broadcast Corrections
2471  // ---------------------
2472  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2473    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2474    enableWidget(enable, _corrIntrComboBox);
2475  }
2476
2477  // Feed Engine
2478  // -----------
2479  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2480    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2481    enableWidget(enable, _outWaitSpinBox);
2482    enableWidget(enable, _outSamplSpinBox);
2483  }
2484
2485  // Serial Output
2486  // -------------
2487  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2488      sender() == _serialAutoNMEAComboBox) {
2489    enable = !_serialMountPointLineEdit->text().isEmpty();
2490    enableWidget(enable, _serialPortNameLineEdit);
2491    enableWidget(enable, _serialBaudRateComboBox);
2492    enableWidget(enable, _serialParityComboBox);
2493    enableWidget(enable, _serialDataBitsComboBox);
2494    enableWidget(enable, _serialStopBitsComboBox);
2495    enableWidget(enable, _serialFlowControlComboBox);
2496    enableWidget(enable, _serialAutoNMEAComboBox);
2497    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2498    enableWidget(enable2, _serialFileNMEALineEdit);
2499    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2500    enableWidget(enable3, _serialHeightNMEALineEdit);
2501    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2502  }
2503
2504  // Outages
2505  // -------
2506  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2507    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2508    enableWidget(enable, _adviseFailSpinBox);
2509    enableWidget(enable, _adviseRecoSpinBox);
2510    enableWidget(enable, _adviseScriptLineEdit);
2511  }
2512
2513  // Miscellaneous
2514  // -------------
2515  if (sender() == 0 || sender() == _miscMountLineEdit) {
2516    enable = !_miscMountLineEdit->text().isEmpty();
2517    enableWidget(enable, _miscIntrComboBox);
2518    enableWidget(enable, _miscScanRTCMCheckBox);
2519    enableWidget(enable, _miscPortLineEdit);
2520  }
2521
2522  // Combine Corrections
2523  // -------------------
2524  if (sender() == 0 || sender() == _cmbTable) {
2525    int iRow = _cmbTable->rowCount();
2526    if (iRow > 0) {
2527      enableWidget(true, _cmbMethodComboBox);
2528      enableWidget(true, _cmbMaxresLineEdit);
2529      enableWidget(true, _cmbSamplSpinBox);
2530      enableWidget(true, _cmbUseGlonass);
2531    }
2532    else {
2533      enableWidget(false, _cmbMethodComboBox);
2534      enableWidget(false, _cmbMaxresLineEdit);
2535      enableWidget(false, _cmbSamplSpinBox);
2536      enableWidget(false, _cmbUseGlonass);
2537    }
2538  }
2539
2540  // Upload(clk)
2541  // -----------
2542  int iRow = _uploadTable->rowCount();
2543  if (iRow > 0) {
2544    enableWidget(true, _uploadIntrComboBox);
2545    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2546    enableWidget(true, _uploadSamplClkRnxSpinBox);
2547    enableWidget(true, _uploadSamplSp3SpinBox);
2548    enableWidget(true, _uploadAntexFile);
2549  }
2550  else {
2551    enableWidget(false, _uploadIntrComboBox);
2552    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2553    enableWidget(false, _uploadSamplClkRnxSpinBox);
2554    enableWidget(false, _uploadSamplSp3SpinBox);
2555    enableWidget(false, _uploadAntexFile);
2556  }
2557
2558  // Upload(eph)
2559  // -----------
2560  iRow = _uploadEphTable->rowCount();
2561  if (iRow > 0) {
2562    enableWidget(true, _uploadSamplRtcmEphSpinBox);
2563  }
2564  else {
2565    enableWidget(false, _uploadSamplRtcmEphSpinBox);
2566  }
2567
2568  // QC
2569  // --
2570  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2571    enable = !_reqcActionComboBox->currentText().isEmpty();
2572    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2573//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2574    enableWidget(enable,                            _reqcObsFileChooser);
2575    enableWidget(enable,                            _reqcNavFileChooser);
2576    enableWidget(enable,                            _reqcOutLogLineEdit);
2577    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2578    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2579    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2580    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2581    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2582//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2583    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2584  }
2585
2586  // SP3 File Comparison
2587  // -------------------
2588  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2589    enable = !_sp3CompFileChooser->fileName().isEmpty();
2590    enableWidget(enable, _sp3CompLogLineEdit);
2591    enableWidget(enable, _sp3CompExclude);
2592  }
2593
2594  enableStartStop();
2595}
2596
2597//
2598////////////////////////////////////////////////////////////////////////////
2599void bncWindow::slotAddCmbRow() {
2600  int iRow = _cmbTable->rowCount();
2601  _cmbTable->insertRow(iRow);
2602  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2603    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2604  }
2605}
2606
2607//
2608////////////////////////////////////////////////////////////////////////////
2609void bncWindow::slotDelCmbRow() {
2610
2611  const static QPalette paletteWhite(QColor(255, 255, 255));
2612  const static QPalette paletteGray(QColor(230, 230, 230));
2613
2614  int nRows = _cmbTable->rowCount();
2615  bool flg[nRows];
2616  for (int iRow = 0; iRow < nRows; iRow++) {
2617    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2618      flg[iRow] = true;
2619    }
2620    else {
2621      flg[iRow] = false;
2622    }
2623  }
2624  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2625    if (flg[iRow]) {
2626      _cmbTable->removeRow(iRow);
2627    }
2628  }
2629  nRows = _cmbTable->rowCount();
2630  if (nRows < 1) {
2631    enableWidget(false, _cmbMethodComboBox);
2632    enableWidget(false, _cmbMaxresLineEdit);
2633    enableWidget(false, _cmbSamplSpinBox);
2634    enableWidget(false, _cmbUseGlonass);
2635  }
2636}
2637
2638//
2639////////////////////////////////////////////////////////////////////////////
2640void bncWindow::populateCmbTable() {
2641
2642  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2643    _cmbTable->removeRow(iRow);
2644  }
2645
2646  bncSettings settings;
2647
2648  int iRow = -1;
2649  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2650  while (it.hasNext()) {
2651    QStringList hlp = it.next().split(" ");
2652    if (hlp.size() > 2) {
2653      ++iRow;
2654      _cmbTable->insertRow(iRow);
2655    }
2656    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2657      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2658    }
2659  }
2660}
2661
2662//
2663////////////////////////////////////////////////////////////////////////////
2664void bncWindow::slotAddUploadRow() {
2665  int iRow = _uploadTable->rowCount();
2666  _uploadTable->insertRow(iRow);
2667  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2668    if      (iCol == 3) {
2669      QLineEdit* passwd = new QLineEdit();
2670      passwd->setFrame(false);
2671      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2672      _uploadTable->setCellWidget(iRow, iCol, passwd);
2673    }
2674    else if (iCol == 4) {
2675      QComboBox* system = new QComboBox();
2676      system->setEditable(false);
2677      system->addItems(QString("IGS14,ETRF2000,NAD83,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2678      system->setFrame(false);
2679      _uploadTable->setCellWidget(iRow, iCol, system);
2680    }
2681    else if (iCol == 5) {
2682      QCheckBox* com = new QCheckBox();
2683      _uploadTable->setCellWidget(iRow, iCol, com);
2684    }
2685    else if (iCol == 11) {
2686      bncTableItem* bncIt = new bncTableItem();
2687      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2688      _uploadTable->setItem(iRow, iCol, bncIt);
2689      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2690    }
2691    else {
2692      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2693    }
2694  }
2695}
2696
2697//
2698////////////////////////////////////////////////////////////////////////////
2699void bncWindow::slotDelUploadRow() {
2700  BNC_CORE->_uploadTableItems.clear();
2701  int nRows = _uploadTable->rowCount();
2702  bool flg[nRows];
2703  for (int iRow = 0; iRow < nRows; iRow++) {
2704    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2705      flg[iRow] = true;
2706    }
2707    else {
2708      flg[iRow] = false;
2709    }
2710  }
2711  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2712    if (flg[iRow]) {
2713      _uploadTable->removeRow(iRow);
2714    }
2715  }
2716  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2717    BNC_CORE->_uploadTableItems[iRow] =
2718                                (bncTableItem*) _uploadTable->item(iRow, 11);
2719  }
2720  nRows = _uploadTable->rowCount();
2721  if (nRows < 1) {
2722    enableWidget(false, _uploadIntrComboBox);
2723    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2724    enableWidget(false, _uploadSamplSp3SpinBox);
2725    enableWidget(false, _uploadSamplClkRnxSpinBox);
2726    enableWidget(false, _uploadAntexFile);
2727  }
2728}
2729
2730//
2731////////////////////////////////////////////////////////////////////////////
2732void bncWindow::populateUploadTable() {
2733  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2734    _uploadTable->removeRow(iRow);
2735  }
2736
2737  bncSettings settings;
2738
2739  int iRow = -1;
2740  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2741  while (it.hasNext()) {
2742    QStringList hlp = it.next().split(",");
2743    if (hlp.size() > 6) {
2744      ++iRow;
2745      _uploadTable->insertRow(iRow);
2746    }
2747    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2748      if      (iCol == 3) {
2749        QLineEdit* passwd = new QLineEdit();
2750        passwd->setFrame(false);
2751        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2752        passwd->setText(hlp[iCol]);
2753        _uploadTable->setCellWidget(iRow, iCol, passwd);
2754      }
2755      else if (iCol == 4) {
2756        QComboBox* system = new QComboBox();
2757        system->setEditable(false);
2758        system->addItems(QString(",IGS14,ETRF2000,NAD83,GDA94,SIRGAS2000,DREF91,Custom").split(","));
2759        system->setFrame(false);
2760        system->setCurrentIndex(system->findText(hlp[iCol]));
2761        _uploadTable->setCellWidget(iRow, iCol, system);
2762      }
2763      else if (iCol == 5) {
2764        QCheckBox* com = new QCheckBox();
2765        if (hlp[iCol].toInt() == Qt::Checked) {
2766          com->setCheckState(Qt::Checked);
2767        }
2768        _uploadTable->setCellWidget(iRow, iCol, com);
2769      }
2770      else if (iCol == 11) {
2771        bncTableItem* bncIt = new bncTableItem();
2772        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2773        _uploadTable->setItem(iRow, iCol, bncIt);
2774        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2775      }
2776      else {
2777        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2778      }
2779    }
2780  }
2781}
2782
2783//
2784////////////////////////////////////////////////////////////////////////////
2785void bncWindow::slotSetUploadTrafo() {
2786  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2787  dlg->exec();
2788  delete dlg;
2789}
2790
2791//
2792////////////////////////////////////////////////////////////////////////////
2793void bncWindow::slotAddUploadEphRow() {
2794  int iRow = _uploadEphTable->rowCount();
2795  _uploadEphTable->insertRow(iRow);
2796  for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
2797    if      (iCol == 3) {
2798      QLineEdit* passwd = new QLineEdit();
2799      passwd->setFrame(false);
2800      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2801      _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2802    }
2803    else if (iCol == 4) {
2804      QComboBox* system = new QComboBox();
2805      system->setEditable(false);
2806      system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2807      system->setFrame(false);
2808      _uploadEphTable->setCellWidget(iRow, iCol, system);
2809    }
2810    else if (iCol == 5) {
2811      bncTableItem* bncIt = new bncTableItem();
2812      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2813      _uploadEphTable->setItem(iRow, iCol, bncIt);
2814      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2815    }
2816    else {
2817      _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2818    }
2819  }
2820}
2821
2822//
2823////////////////////////////////////////////////////////////////////////////
2824void bncWindow::slotDelUploadEphRow() {
2825  BNC_CORE->_uploadTableItems.clear();
2826  int nRows = _uploadEphTable->rowCount();
2827  bool flg[nRows];
2828  for (int iRow = 0; iRow < nRows; iRow++) {
2829    if (_uploadEphTable->isItemSelected(_uploadEphTable->item(iRow,1))) {
2830      flg[iRow] = true;
2831    }
2832    else {
2833      flg[iRow] = false;
2834    }
2835  }
2836  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2837    if (flg[iRow]) {
2838      _uploadEphTable->removeRow(iRow);
2839    }
2840  }
2841  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2842    BNC_CORE->_uploadTableItems[iRow] =
2843                                (bncTableItem*) _uploadEphTable->item(iRow, 5);
2844  }
2845  nRows = _uploadEphTable->rowCount();
2846  if (nRows < 1) {
2847    enableWidget(false, _uploadSamplRtcmEphSpinBox);
2848  }
2849}
2850
2851//
2852////////////////////////////////////////////////////////////////////////////
2853void bncWindow::populateUploadEphTable() {
2854  for (int iRow = _uploadEphTable->rowCount()-1; iRow >=0; iRow--) {
2855    _uploadEphTable->removeRow(iRow);
2856  }
2857
2858  bncSettings settings;
2859
2860  int iRow = -1;
2861  QListIterator<QString> it(settings.value("uploadEphMountpointsOut").toStringList());
2862  while (it.hasNext()) {
2863    QStringList hlp = it.next().split(",");
2864    if (hlp.size() > 4) {
2865      ++iRow;
2866      _uploadEphTable->insertRow(iRow);
2867    }
2868    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2869      if      (iCol == 3) {
2870        QLineEdit* passwd = new QLineEdit();
2871        passwd->setFrame(false);
2872        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2873        passwd->setText(hlp[iCol]);
2874        _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2875      }
2876      else if (iCol == 4) {
2877        QComboBox* system = new QComboBox();
2878        system->setEditable(false);
2879        system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2880        system->setFrame(false);
2881        system->setCurrentIndex(system->findText(hlp[iCol]));
2882        _uploadEphTable->setCellWidget(iRow, iCol, system);
2883      }
2884      else if (iCol == 5) {
2885        bncTableItem* bncIt = new bncTableItem();
2886        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2887        _uploadEphTable->setItem(iRow, iCol, bncIt);
2888        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2889      }
2890      else {
2891        _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2892      }
2893    }
2894  }
2895}
2896
2897
2898// Progress Bar Change
2899////////////////////////////////////////////////////////////////////////////
2900void bncWindow::slotPostProcessingProgress(int nEpo) {
2901  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2902}
2903
2904// Post-Processing Reqc Finished
2905////////////////////////////////////////////////////////////////////////////
2906void bncWindow::slotPostProcessingFinished() {
2907  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2908  _runningPPP     = false;
2909  _runningEdit    = false;
2910  _runningQC      = false;
2911  _runningSp3Comp = false;
2912  _actStart->setText(tr("Sta&rt"));
2913  enableStartStop();
2914}
2915
2916// Edit teqc-like editing options
2917////////////////////////////////////////////////////////////////////////////
2918void bncWindow::slotReqcEditOption() {
2919  saveOptions();
2920  reqcDlg* dlg = new reqcDlg(this);
2921  dlg->move(this->pos().x()+50, this->pos().y()+50);
2922  dlg->exec();
2923  delete dlg;
2924}
2925
2926// Enable/Disable Start and Stop Buttons
2927////////////////////////////////////////////////////////////////////////////
2928void bncWindow::enableStartStop() {
2929  if ( running() ) {
2930    _actStart->setEnabled(false);
2931    if (_runningRealTime || _runningPPP) {
2932      _actStop->setEnabled(true);
2933    }
2934  }
2935  else {
2936    _actStart->setEnabled(true);
2937    _actStop->setEnabled(false);
2938  }
2939}
2940
2941// Show Map
2942////////////////////////////////////////////////////////////////////////////
2943void bncWindow::slotMapMountPoints() {
2944  saveOptions();
2945  t_bncMap* bncMap = new t_bncMap(this);
2946  bncMap->setMinimumSize(800, 600);
2947  bncMap->setWindowTitle("Selected Mountpoints");
2948
2949  bncSettings settings;
2950  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2951  while (it.hasNext()) {
2952    QStringList hlp = it.next().split(" ");
2953    if (hlp.size() < 5) continue;
2954    QUrl   url(hlp[0]);
2955    double latDeg = hlp[3].toDouble();
2956    double lonDeg = hlp[4].toDouble();
2957    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2958  }
2959
2960  bncMap->show();
2961}
2962
2963// Show Map
2964////////////////////////////////////////////////////////////////////////////
2965void bncWindow::slotMapPPP() {
2966#ifdef QT_WEBKIT
2967  saveOptions();
2968  enableWidget(false, _pppWidgets._mapWinButton);
2969  enableWidget(false, _pppWidgets._useGoogleMap);
2970  enableWidget(false, _pppWidgets._useOpenStreetMap);
2971  enableWidget(false, _pppWidgets._mapWinDotSize);
2972  enableWidget(false, _pppWidgets._mapWinDotColor);
2973
2974  if (!_mapWin) {
2975    _mapWin = new bncMapWin(this);
2976    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2977    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2978            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2979  }
2980  _mapWin->show();
2981#else
2982  QMessageBox::information(this, "Information",
2983                           "Qt Library compiled without QtWebKit");
2984#endif
2985}
2986
2987// Show Map
2988////////////////////////////////////////////////////////////////////////////
2989void bncWindow::slotMapPPPClosed() {
2990#ifdef QT_WEBKIT
2991  enableWidget(true, _pppWidgets._mapWinButton);
2992  enableWidget(true, _pppWidgets._useGoogleMap);
2993  enableWidget(true, _pppWidgets._useOpenStreetMap);
2994  enableWidget(true, _pppWidgets._mapWinDotSize);
2995  enableWidget(true, _pppWidgets._mapWinDotColor);
2996  if (_mapWin) {
2997    QListIterator<bncGetThread*> it(_threads);
2998    while (it.hasNext()) {
2999      bncGetThread* thread = it.next();
3000      thread->disconnect(_mapWin);
3001    }
3002    _mapWin->deleteLater();
3003    _mapWin = 0;
3004  }
3005#endif
3006}
Note: See TracBrowser for help on using the repository browser.