| [7981] | 1 | --------------------------------------------------------------------------------
|
|---|
| [7891] | 2 | BNC VERSION 2.13.0 (xx.xx.xxxx) current
|
|---|
| [7981] | 3 | --------------------------------------------------------------------------------
|
|---|
| [8010] | 4 | Added (12.08.2016): resp. config keywords in context help
|
|---|
| [8001] | 5 | Added (08.08.2016): some informations about the data source is added as
|
|---|
| 6 | comment within the header of RINEX navigation files
|
|---|
| [7981] | 7 | Added (21.07.2016): frequency specific signal priorities are added for
|
|---|
| [8080] | 8 | RINEX v3 to RINEX v2 conversion
|
|---|
| [7981] | 9 | Added (29.06.2016): consideration of provioder ID changes in SSR streams
|
|---|
| 10 | during PPP analysis
|
|---|
| [7997] | 11 | Added (18.05.2016): expected observations in RINEX QC
|
|---|
| [8080] | 12 | Changed (15.02.2017): SIRGAS2000 transformation parameters adjusted to IGb14
|
|---|
| [8107] | 13 | Changed (10.04.2017): Transformation parameters for ITRF2005 to GDA94 removed
|
|---|
| 14 | Changed (10.04.2017): Transformation parameters for ITRF2008 to SIRGAS95 removed
|
|---|
| 15 | Changed (10.04.2017): Transformation parameters for ITRF2014 to GDA2020 added
|
|---|
| [7997] | 16 | Changed (28.07.2016): small adaptations in qwtpolar sources to allow the
|
|---|
| [8080] | 17 | successful compilation of BNC on a Raspberry Pi, see
|
|---|
| [7997] | 18 | http://software.rtcm-ntrip.org/ticket/88
|
|---|
| 19 | Changed (21.07.2016): Default signal priority list
|
|---|
| [7981] | 20 | Changed (08.06.2016): weighting factor for GLONASS phase observations
|
|---|
| 21 | is now enlarged
|
|---|
| [7997] | 22 | Changed (27.05.2016): RINEX 2.11 ephemeris output for an unknown
|
|---|
| 23 | transmission time is set to 0.000000000000e+00
|
|---|
| 24 | Changed (23.05.2016): the real satellite visibility is considered now,
|
|---|
| 25 | if the expected observations are computed in RINEX QC
|
|---|
| 26 | Changed (12.05.2016): limits for spherical harmonics degree and order extended
|
|---|
| 27 | Changed (28.04.2016): ephemeris upload is extended to allow an upload of more
|
|---|
| 28 | than one stream and to choose a single satellite system
|
|---|
| [8014] | 29 | Fixed (12.08.2016): check regarding wrong observation epochs is done during
|
|---|
| 30 | latency check as well to prevent erroneous latencies
|
|---|
| [7981] | 31 | Fixed (08.06.2016): map generation from sourcetable entry
|
|---|
| 32 | Fixed (02.06.2016): the approach how to wait for clock corrections
|
|---|
| 33 | in PPP mode, which was well proven in BNC verson 2.11
|
|---|
| 34 | is re-implemented
|
|---|
| [7938] | 35 | Fixed (30.05.2016): some NMEA components in PPP output are fixed:
|
|---|
| [7981] | 36 | time stamp is now UTC, hDop value instead pDop value
|
|---|
| [7897] | 37 | Fixed (12.05.2016): wrong RINEX v2 header line excluded
|
|---|
| 38 | Fixed (21.04.2016): RINEX v2 file naming for observation files
|
|---|
| [8107] | 39 | Fixed (10.04.2017): minor bugs to prevent some irregular crashes of BNC
|
|---|
| [7886] | 40 |
|
|---|
| [7981] | 41 | --------------------------------------------------------------------------------
|
|---|
| [7886] | 42 | BNC VERSION 2.12.0 (19.04.2016)
|
|---|
| [7981] | 43 | --------------------------------------------------------------------------------
|
|---|
| [7891] | 44 | Added: Observation code selection in RINEX file editing
|
|---|
| 45 | Added: Machine-readable output of RINEX QC
|
|---|
| 46 | Added: PPP client functionality for parallel processing of an arbitrary number of stations in separate threads
|
|---|
| 47 | Added: NMEA output for any station processed in PPP mode
|
|---|
| 48 | Added: PPP processing of any number of linear combinations of GNSS measurements selected by user
|
|---|
| 49 | Added: Encoding/Decoding RTCM SSR I messages for Galileo, BDS, SBAS and QZSS
|
|---|
| 50 | Added: Encoding/Decoding RTCM SSR phase bias messages
|
|---|
| 51 | Added: Encoding/Decoding RTCM SSR ionospheric model messages, single-layer model for total electron content
|
|---|
| 52 | Added: RTCM SSR I messages for Galileo, BDS, SBAS and QZSS support from RTNET interface
|
|---|
| 53 | Added: RTCM SSR II messages (phase biases and SSR ionospheric model) support from RTNET interface
|
|---|
| 54 | Added: Computataion of VTEC and STEC from SSR ionospheric model messages for usage in PPP mode
|
|---|
| 55 | Added: Handle old-fashioned SNR values in RINEX
|
|---|
| 56 | Added: Comparison of SP3 files
|
|---|
| 57 | Added: Encoding/Decoding of RTCM v3 proposal for Galileo Broadcast Ephemeris message 1046
|
|---|
| 58 | Added: Encoding/Decoding of RTCM v3 QZSS Broadcast Ephemeris message 1044
|
|---|
| 59 | Added: Encoding/Decoding of RTCM v3 SBAS Broadcast Ephemeris message 1043
|
|---|
| 60 | Added: Encoding/Decoding of RTCM v3 BDS Broadcast Ephemeris message 63
|
|---|
| 61 | Added: RINEX v3 support of Galileo, BDS, SBAS and QZSS Broadcast Ephemerides
|
|---|
| 62 | Added: Consideration of the aspect that Galileo NAV message can be provided for the same epoch but with different flags (I/NAV, F/NAV, DVS)
|
|---|
| 63 | Added: Forwarding NMEA GNGGA to Ntrip Broadcaster
|
|---|
| 64 | Added: Compute IODs for BDS and SBAS from CRC over broadcast ephemeris and clock parameters
|
|---|
| 65 | Added: Example configuration for SP3 file comparison
|
|---|
| 66 | Added: Choose between code and phase observations when in PPP SSR I mode
|
|---|
| 67 | Added: Broadcast ephemeris check regarding allowed age of data sets
|
|---|
| 68 | Added: Code bias usage for PPP SSR I mode
|
|---|
| 69 | Added: Code bias, phase bias and VTEC usage in extended PPP mode
|
|---|
| 70 | Added: Allow GPS-only and GLONASS-only RINEX v2 Navigation files
|
|---|
| 71 | Added: Support Galileo I/NAV broadcast ephemeris
|
|---|
| 72 | Added: Extended RINEX v3 filenames
|
|---|
| 73 | Added: Stream's country added to configuration string 'mountPoints'
|
|---|
| 74 | Added: destinction of GEO/MEO satellites during BDS velocity derermination
|
|---|
| 75 | Added: Set TOE from BDS week and second
|
|---|
| 76 | Added: Use BDS observations and ephemerides in PPP SSR I mode
|
|---|
| 77 | Added: Considering that yaw angle restricted to -180 to +180 deg
|
|---|
| 78 | Added: Update interval for VTEC in RTNET stream format
|
|---|
| 79 | Added: Phase shift records in RINEX v3 headers
|
|---|
| 80 | Added: Output GLONASS slot numbers from scanning stream content
|
|---|
| 81 | Added: Decoder interface for PPP SSR I+II messages for Galileo/QZSS/SBAS/BDS
|
|---|
| 82 | Added: RINEX QC, receiver/antenna information editable
|
|---|
| 83 | Added: Support of new RINEX header lines regarding phase shifts, GLONAQSS slots and GLONASS biases during file merging
|
|---|
| 84 | Added: Switch to port 443 for skeleton file download from https website
|
|---|
| 85 | Added: SINEX Troposphere file output
|
|---|
| 86 | Added: Comments with respect to RINEX v3 to RINEX v2 observation file conversion
|
|---|
| 87 | Added: String for Operating System in logfile output
|
|---|
| 88 | Added: Full integration of 'rtcm3torinex'
|
|---|
| 89 | Added: Extended command line help
|
|---|
| 90 | Changed: RINEX file concatenation
|
|---|
| 91 | Changed: Routine handling of data input and output in RINEX format re-written
|
|---|
| 92 | Changed: QC routines re-written with the goal of handling all signal types
|
|---|
| 93 | Changed: SNR and MP visualization depending on RINEX observation attribute
|
|---|
| 94 | Changed: PPP default options
|
|---|
| 95 | Changed: Consideration of the full antenna PCO vector in all PPP modes
|
|---|
| 96 | Changed: SSR clock correction converted to seconds to be consistent with broadcast values
|
|---|
| 97 | Changed: Read local RINEX skeleton files
|
|---|
| 98 | Changed: Renaming BDS first frequency from '1' to '2'
|
|---|
| 99 | Changed: Default observation types for RINEX v3 files
|
|---|
| 100 | Fixed: Receiver antenna PCO in ionosphere-free PPP mode
|
|---|
| 101 | Fixed: Saastamoinen tropospheric correction for very high elevation receivers
|
|---|
| 102 | Fixed: VRS support in sending NMEA in Auto/Manual mode to Ntrip Broadcaster
|
|---|
| 103 | Fixed: Stream failure/recovery reports
|
|---|
| 104 | Fixed: Reset time series plot when restarting PPP in post processing mode
|
|---|
| 105 | Fixed: Velocity determination for geostationary BDS satellites
|
|---|
| 106 | Fixed: SBAS IODN
|
|---|
| 107 | Fixed: Galileo week number
|
|---|
| 108 | Fixed: RTCM v2 decoder
|
|---|
| [7886] | 109 |
|
|---|
| [7891] | 110 | -------------------------------------------------------------------------------
|
|---|
| 111 | BNC VERSION 2.11 (Sept-2014)
|
|---|
| 112 | -------------------------------------------------------------------------------
|
|---|
| 113 | Added: Raw stream output through TCP/IP port
|
|---|
| 114 | Changed: SIRGAS transformation parameters adjusted
|
|---|
| 115 | Changed: ANTEX file updated
|
|---|
| 116 | Changed: RTCM SSR messages updated
|
|---|
| 117 | Changed: Maximum number of GNSS observations increased
|
|---|
| 118 | Changed: Loss of lock handling changed
|
|---|
| 119 | Fixed: GLONASS code biases
|
|---|
| [7886] | 120 |
|
|---|
| [7891] | 121 | -------------------------------------------------------------------------------
|
|---|
| 122 | BNC VERSION 2.10 (Dec-2013)
|
|---|
| 123 | -------------------------------------------------------------------------------
|
|---|
| 124 | Added: Transformation ITRF2008 to NAD83 and DREF91
|
|---|
| 125 | Added: CodeBias added to RTNET stream format
|
|---|
| 126 | Added: Feed engine output sorted per stream
|
|---|
| 127 | Added: Feed engine output filename change on-the-fly
|
|---|
| 128 | Added: 'Append files' option for RINEX observation files
|
|---|
| 129 | Added: RTCM v3 Galileo Broadcast Ephemeris message 1046
|
|---|
| 130 | Added: Reset ambiguities in PPP when orbit/clock correction IDs change
|
|---|
| 131 | Added: Satellite clock offsets are reset in adjustment for combination when orbit/clock correction IDs change
|
|---|
| 132 | Changed: Made C1 in BeiDou default observation type instead of C2
|
|---|
| 133 | Changed: Broadcast Correction ASCII file output for message 1058 & 1064 modified
|
|---|
| 134 | Fixed: Clock RINEX und SP3 file generation on Windows systems
|
|---|
| 135 | Fixed: Broadcast Ephemeris generation
|
|---|
| 136 | Fixed: GPS L2 in 'Feed Engine' output
|
|---|
| 137 | Fixed: GPS L2 phase data in RINEX2
|
|---|
| 138 | Fixed: GLONASS frequency numbers
|
|---|
| 139 |
|
|---|
| 140 | -------------------------------------------------------------------------------
|
|---|
| 141 | BNC VERSION 2.9 (Jul-2013)
|
|---|
| 142 | -------------------------------------------------------------------------------
|
|---|
| 143 | Added: Include Galileo in SPP
|
|---|
| 144 | Added: RINEX QC multipath an SNR sky plots for GLONASS and Galileo
|
|---|
| 145 | Added: Bias estimation for GLONASS clocks in PPP
|
|---|
| 146 | Added: Trace positions on GM or OSM maps
|
|---|
| 147 | Changed: Format for feeding a connected GNSS engine
|
|---|
| 148 | Changed: RTNET format for receiving data from a connected GNSS engine
|
|---|
| 149 | Fixed: SSR stream upload buffering disabled
|
|---|
| 150 |
|
|---|
| 151 | -------------------------------------------------------------------------------
|
|---|
| 152 | BNC VERSION 2.8 (Mar-2013)
|
|---|
| 153 | -------------------------------------------------------------------------------
|
|---|
| 154 | Added: Concatenate RINEX v3 navigation files containing Galileo ephemeris
|
|---|
| 155 | Added: Correcting clocks for scale factor involved in transformation
|
|---|
| 156 | Changed: Started work on new version in Sep 2012
|
|---|
| 157 | Changed: Plausibility check of GLONASS ephemeris
|
|---|
| 158 | Changed: Orbit/clock interpolation in SSR stream encoding and upload to caster
|
|---|
| 159 | Fixed: Epoch special event flag in RINEX concatenation
|
|---|
| 160 | Fixed: Limit RINEX v2 records length to 80 characters
|
|---|
| 161 | Fixed: SSR message update interval indicator
|
|---|
| 162 | Fixed: Fixed SSR stream encoding and upload
|
|---|
| 163 |
|
|---|
| 164 | -------------------------------------------------------------------------------
|
|---|
| 165 | BNC VERSION 2.7 (Sept-2012)
|
|---|
| 166 | -------------------------------------------------------------------------------
|
|---|
| 167 | Added: Clock RINEX file header extended
|
|---|
| 168 | Added: Decoding/converting BeiDou and QZSS added
|
|---|
| 169 | Added: Work on RINEX v2 and v3 quality check started
|
|---|
| 170 | Added: QWT and QWTPOLAR graphics libraries added
|
|---|
| 171 | Added: RINEX QC through multipath analysis sky plot
|
|---|
| 172 | Added: RINEX QC through signal-to-noise ratio sky plot
|
|---|
| 173 | Added: RINEX QC through satellite availability plot
|
|---|
| 174 | Added: RINEX QC through satellite elevation plot
|
|---|
| 175 | Added: RINEX QC through PDOP plot
|
|---|
| 176 | Added: Log observation types contained in RTCM Version 3 MSM streams
|
|---|
| 177 | Added: Reading RINEX v3 observation type header records from RINEX skeleton files
|
|---|
| 178 | Added: Logfile for RINEX file editing and concatenation
|
|---|
| 179 | Added: Save PNG plot files on disk
|
|---|
| 180 | Added: Plot stream distribution map from selected sources
|
|---|
| 181 | Changed: Source code completely re-arranged
|
|---|
| 182 | Changed: Plot stream distribution map from Ntrip Broadcaster source-table
|
|---|
| 183 | Fixed: Bug in L5 decoding fixed
|
|---|
| 184 | Fixed: Bug in on-the-fly configuration fixed
|
|---|
| 185 | Fixed: Short periodic outages in PPP time series when 'Sync Corr' set to zero
|
|---|
| 186 |
|
|---|
| 187 | -------------------------------------------------------------------------------
|
|---|
| 188 | BNC VERSION 2.6 (Apr-2011)
|
|---|
| 189 | -------------------------------------------------------------------------------
|
|---|
| 190 | Added: Complete integration of BNS in BNC
|
|---|
| 191 | Added: SP3 and Clock RINEX output
|
|---|
| 192 | Added: PPP in post processing Mode
|
|---|
| 193 | Added: Some RINEX editing & QC functionality
|
|---|
| 194 | Added: Threshold for orbit outliers in combination solution
|
|---|
| 195 | Added: Real-time engine becomes orbit/clock server instead of client
|
|---|
| 196 | Added: Correction for antenna eccentricities
|
|---|
| 197 | Added: Quick start mode for PPP
|
|---|
| 198 | Added: SSL/TLS Support of Ntrip Version 2
|
|---|
| 199 | Added: RINEX editing, concatenation and quality check
|
|---|
| 200 | Added: Reading all configuration options from command line
|
|---|
| 201 | Added: Specific rates for orbits and clocks in streams and SP3/RNX files
|
|---|
| 202 | Changed: 'EOE' added to orbit/clock stream from engine
|
|---|
| 203 | Changed: Design of format for feeding engine changed to follow RINEX v3
|
|---|
| 204 | Changed: Implementation of SSR message encoding modified according to standard
|
|---|
| 205 | Changed: Switch to Qt version 4.7.3
|
|---|
| 206 | Changed: RTCM v3 Galileo Broadcast Ephemeris message 1045
|
|---|
| 207 | Changed: Change default configuration file suffix from 'ini' to 'bnc'
|
|---|
| 208 |
|
|---|
| 209 | -------------------------------------------------------------------------------
|
|---|
| 210 | BNC VERSION 2.5 (Feb-2011)
|
|---|
| 211 | -------------------------------------------------------------------------------
|
|---|
| 212 | Added: PPP option for sync of clock observations and corrections
|
|---|
| 213 | Added: Drafted RTCM v3 Galileo ephemeris messages 1045
|
|---|
| 214 | Added: Drafted RTCM v3 Multiple Signal Messages
|
|---|
| 215 | Added: Optional specification of sigmas for coordinates and troposphere in PPP
|
|---|
| 216 | Added: Include Galileo in SPP
|
|---|
| 217 | Added: Include Galileo observations in output via IP port
|
|---|
| 218 | Added: Include Galileo observations in output via RINEX v3 files
|
|---|
| 219 | Added: Correct observations for Antenna Phase Center offsets
|
|---|
| 220 | Added: Combine orbit/clock correction streams
|
|---|
| 221 | Added: Specify corrections mountpoint in PPP panel
|
|---|
| 222 | Changed: Interface format for feeding a real-time engine with observations
|
|---|
| 223 |
|
|---|
| 224 | -------------------------------------------------------------------------------
|
|---|
| 225 | BNC VERSION 2.4 (Dec-2010)
|
|---|
| 226 | -------------------------------------------------------------------------------
|
|---|
| 227 | Added: Output of averaged positions when in PPP mode
|
|---|
| 228 | Added: QuickStart PPP option
|
|---|
| 229 | Added: Sigmas for observations and parameters
|
|---|
| 230 | Added: Stream distribution map
|
|---|
| 231 | Changed: Use always the latest received set of Broadcast Ephemeris
|
|---|
| 232 | Changed: Improvement of data sharing efficiency among different threads
|
|---|
| 233 | Changed: Design of PPP panel section
|
|---|
| 234 | Fixed: GPS Ephemeris in RINEX v3 format
|
|---|
| 235 |
|
|---|
| 236 | -------------------------------------------------------------------------------
|
|---|
| 237 | BNC VERSION 2.3 (Aug-2010)
|
|---|
| 238 | -------------------------------------------------------------------------------
|
|---|
| 239 | Changed: Internal format for saving raw streams
|
|---|
| 240 | Changed: Format of PPP logs in logfile
|
|---|
| 241 | Fixed: Outlier detection in GLONASS ambiguity resolution
|
|---|
| 242 | Fixed: Complete acceleration terms for GLONASS ephemeris
|
|---|
| 243 | Fixed: Handling ephemeris IOD's in PPP mode
|
|---|
| 244 |
|
|---|
| 245 | -------------------------------------------------------------------------------
|
|---|
| 246 | BNC VERSION 2.2 (Jul-2010)
|
|---|
| 247 | -------------------------------------------------------------------------------
|
|---|
| 248 | Fixed: GLONASS ephemeris time
|
|---|
| 249 |
|
|---|
| 250 | -------------------------------------------------------------------------------
|
|---|
| 251 | BNC VERSION 2.1 (Jun-2010)
|
|---|
| 252 | -------------------------------------------------------------------------------
|
|---|
| 253 | Added: PPP in post processing mode
|
|---|
| 254 | Changed: Update of SSR messages following draft dated 2010-04-12
|
|---|
| 255 | Changed: Generating error message when observation epoch is wrong
|
|---|
| 256 | Fixed: SSR GLONASS message generation
|
|---|
| 257 |
|
|---|
| 258 | -------------------------------------------------------------------------------
|
|---|
| 259 | BNC VERSION 2.0 (Feb-2010)
|
|---|
| 260 | -------------------------------------------------------------------------------
|
|---|
| 261 | Added: Real-time PPP option
|
|---|
| 262 | Changed: Change sign of Broadcast Corrections
|
|---|
| 263 |
|
|---|
| 264 | -------------------------------------------------------------------------------
|
|---|
| 265 | BNC VERSION 1.8 (Nov-2009)
|
|---|
| 266 | -------------------------------------------------------------------------------
|
|---|
| 267 | Changed: On-the-fly reconfiguration of latency and throughput plots
|
|---|
| 268 |
|
|---|
| 269 | -------------------------------------------------------------------------------
|
|---|
| 270 | BNC VERSION 1.7 (Nov-2009)
|
|---|
| 271 | -------------------------------------------------------------------------------
|
|---|
| 272 | Added: Upgrade to Qt Version 4.5.2
|
|---|
| 273 | Added: Support of Ntrip v2
|
|---|
| 274 | Added: Rover support via serial port
|
|---|
| 275 | Added: Show broadcaster table from www.rtcm-ntrip.org
|
|---|
| 276 | Added: Enable/disable panel widgets
|
|---|
| 277 | Added: User defined configuration filename
|
|---|
| 278 | Added: Daily logfile rotation
|
|---|
| 279 | Added: Read from TCP/IP port, by-pass Ntrip transport protocol
|
|---|
| 280 | Added: Save NMEA sentences coming from rover
|
|---|
| 281 | Added: Auto start
|
|---|
| 282 | Added: Drag and drop ini files
|
|---|
| 283 | Added: Read from serial port, by-pass Ntrip transport protocol
|
|---|
| 284 | Added: Read from UPD port, by-pass Ntrip transport protocol
|
|---|
| 285 | Added: Throughput plot
|
|---|
| 286 | Added: Latency plot
|
|---|
| 287 | Changed: Switch to configuration files in ini-Format
|
|---|
| 288 | Changed: Update of SSR messages following RTCM 091-2009-SC104-542
|
|---|
| 289 | Changed: Output format of Broadcast Corrections
|
|---|
| 290 | Fixed: RINEX Navigation file format
|
|---|
| 291 |
|
|---|
| 292 | -------------------------------------------------------------------------------
|
|---|
| 293 | BNC VERSION 1.6.1 (Dec-2008)
|
|---|
| 294 | -------------------------------------------------------------------------------
|
|---|
| 295 | Changed: HTTP GET when no proxy in front
|
|---|
| 296 |
|
|---|
| 297 | -------------------------------------------------------------------------------
|
|---|
| 298 | BNC VERSION 1.6 (Dec-2008)
|
|---|
| 299 | -------------------------------------------------------------------------------
|
|---|
| 300 | Added: RTCM v3 decoder for orbit and clock corrections
|
|---|
| 301 | Added: Check RTCM v3 streams for incoming message types
|
|---|
| 302 | Added: Decode RTCM v2 message types 3, 20, 21, and 22
|
|---|
| 303 | Added: Loss of lock and lock time indicator
|
|---|
| 304 | Added: Leap second 1 January 2009
|
|---|
| 305 | Added: Offline mode, read data from file
|
|---|
| 306 | Added: Output antenna descriptor, coordinates and eccentricities from RTCM v3
|
|---|
| 307 | Added: Reconfiguration on-the-fly
|
|---|
| 308 | Added: Binary output of unsynchronized observations
|
|---|
| 309 | Changed: Fill blank columns in RINEX v3 with 0.000
|
|---|
| 310 | Changed: Accept GLONASS in RTCM v3 when transmitted first
|
|---|
| 311 | Changed: Binary output of synchronized observations
|
|---|
| 312 | Fixed: Rounding error in RTCM v3 decoder concerning GLONASS height
|
|---|
| 313 | Fixed: Fixed problem with joined RTCM v3 blocks
|
|---|
| 314 |
|
|---|
| 315 | -------------------------------------------------------------------------------
|
|---|
| 316 | BNC VERSION 1.5 (Apr-2008)
|
|---|
| 317 | -------------------------------------------------------------------------------
|
|---|
| 318 | Added: Handle ephemeris from RTCM Version 3 streams
|
|---|
| 319 | Added: Upgrade to Qt Version 4.3.2
|
|---|
| 320 | Added: Optional RINEX v3 output
|
|---|
| 321 | Added: SBAS support
|
|---|
| 322 | Added: Handle ephemeris from RTIGS streams
|
|---|
| 323 | Added: Monitor stream failure/recovery and latency
|
|---|
| 324 | Changed: Redesign of main window
|
|---|
| 325 | Changed: Major revision of input buffer in RTCM v2 decoder
|
|---|
| 326 | Fixed: RINEX skeleton download following stream outage
|
|---|
| 327 | Fixed: Freezing of About window on Mac OS X
|
|---|
| 328 | Fixed: Fixed problem with PRN 32 in RTCM v2 decoder
|
|---|
| 329 | Fixed: Fix for Trimble 4000SSI receivers in RTCM v2 decoder
|
|---|
| 330 |
|
|---|
| 331 | -------------------------------------------------------------------------------
|
|---|
| 332 | BNC VERSION 1.4 (Jul-2007)
|
|---|
| 333 | -------------------------------------------------------------------------------
|
|---|
| 334 | Fixed: Skip messages from proxy server
|
|---|
| 335 | Fixed: Call RINEX script through 'nohup'
|
|---|
| 336 |
|
|---|
| 337 | -------------------------------------------------------------------------------
|
|---|
| 338 | BNC VERSION 1.3 (May-2007)
|
|---|
| 339 | -------------------------------------------------------------------------------
|
|---|
| 340 | Added: Source code published
|
|---|
| 341 |
|
|---|
| 342 | -------------------------------------------------------------------------------
|
|---|
| 343 | BNC VERSION 1.2b (Apr-2007)
|
|---|
| 344 | -------------------------------------------------------------------------------
|
|---|
| 345 | Added: ZERO decoder added
|
|---|
| 346 | Added: HTTP Host directive for skeleton file download
|
|---|
| 347 | Added: Percent encoding for user IDs and passwords
|
|---|
| 348 | Changed: Download public RINEX skeletons once per day
|
|---|
| 349 | Changed: Upgrade to Qt Version 4.2.3
|
|---|
| 350 | Changed: Replace 'system' call for RINEX script by 'QProcess'
|
|---|
| 351 | Fixed: Output only through IP port
|
|---|
| 352 | Fixed: Method 'reconnecting' now thread-save
|
|---|
| 353 | Fixed: Exit execution of calling thread for RTCM3 streams
|
|---|
| 354 | Fixed: Signal-slot mechanism for threads
|
|---|
| 355 |
|
|---|
| 356 | -------------------------------------------------------------------------------
|
|---|
| 357 | BNC VERSION 1.1b (Jan-2007)
|
|---|
| 358 | -------------------------------------------------------------------------------
|
|---|
| 359 | Added: Observables C2, S1, and S2
|
|---|
| 360 | Added: Virtual reference station access
|
|---|
| 361 | Added: Online help through Shift+F1
|
|---|
| 362 | Changed: Small letters for public RINEX skeleton files
|
|---|
| 363 | Fixed: RTCM2 decoder time tag fixed
|
|---|
| 364 |
|
|---|
| 365 | -------------------------------------------------------------------------------
|
|---|
| 366 | BNC VERSION 1.0b (Dec-2006)
|
|---|
| 367 | -------------------------------------------------------------------------------
|
|---|
| 368 | initial version published based on Qt 4.2.3
|
|---|
