Changeset 9445 in ntrip
- Timestamp:
- May 25, 2021, 10:33:29 PM (3 years ago)
- Location:
- trunk/BNC/src
- Files:
-
- 3 edited
Legend:
- Unmodified
- Added
- Removed
-
trunk/BNC/src/bnchelp.html
r9440 r9445 4279 4279 4280 4280 <pre> 4281 /home/user/BNCOUTPUT 0${V3PROD}.sp34281 /home/user/BNCOUTPUT${V3PROD}.sp3 4282 4282 </pre> 4283 4283 Note that '${V3PROD}' produces the time stamp in the filename, which is related to the RINEX version 3 filename concept. … … 4310 4310 Specify a path for saving the generated clock corrections as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: 4311 4311 <pre> 4312 /home/user/BNCOUTPUT 0${V3PROD}.clk4312 /home/user/BNCOUTPUT${V3PROD}.clk 4313 4313 </pre> 4314 4314 Note that '${V3PROD}' produces the time stamp in the filename, which is related to the RINEX version 3 filename concept. … … 5263 5263 <b>Upload Corrections Panel keys:</b> 5264 5264 uploadMountpointsOut {Upload corrections table [character string, semicolon separated list, each element in quotation marks, example: 5265 "igs-ip.net,2101,IGS01,2,user,pass,IGS14,IGS-SSR,0,/home/user/BNCOUTPUT 0${V3PROD}.sp3,BNCOUTPUT0${V3PROD}.clk,258,1,0;5265 "igs-ip.net,2101,IGS01,2,user,pass,IGS14,IGS-SSR,0,/home/user/BNCOUTPUT${V3PROD}.sp3,BNCOUTPUT${V3PROD}.clk,258,1,0; 5266 5266 euref-ip.net,2101,EUREF01,2,user,pass,ETRF2000,IGS-SSR,0,,,258,2,0"]} 5267 5267 uploadIntr {Length of SP3 and Clock RINEX file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]} … … 5322 5322 //user:pass@igs-ip.net:2101/FFMJ1 RTCM_3.1 DEU 50.09 8.66 no 2" 5323 5323 (7) bnc --key cmbStreams "SSRA00BKG1 BKG 1.0;SSRA00CNE1 CNES 1.0" 5324 (8) bnc --key uploadMountpointsOut "products.igs-ip.net,98756,TEST,2,user,passwd,IGS14,IGS-SSR,2,/Users/weber/BNCOUTPUT 0${V3PROD}.clk,,33,3,2;5324 (8) bnc --key uploadMountpointsOut "products.igs-ip.net,98756,TEST,2,user,passwd,IGS14,IGS-SSR,2,/Users/weber/BNCOUTPUT${V3PROD}.clk,,33,3,2; 5325 5325 euref-ip.net,333,TEST2,2,user,passwd,ETRF12000,IGS-SSR,2,,,33,5,5" 5326 5326 (9) bnc --key PPP/staTable "FFMJ00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0.1,7777; -
trunk/BNC/src/bncmain.cpp
r9441 r9445 267 267 "Upload Corrections Panel keys:\n" 268 268 " uploadMountpointsOut {Upload corrections table [character string, semicolon separated list, each element in quotation marks, example:\n" 269 " \"igs-ip.net,2101,SSRA03IGS0,1,,pass,IGS14,RTCM-SSR,0,/home/user/BNCOUTPUT 0${V3PROD}.sp3,/home/user/BNCOUTPUT0${V3PROD}.clk,258,1,0;\n"269 " \"igs-ip.net,2101,SSRA03IGS0,1,,pass,IGS14,RTCM-SSR,0,/home/user/BNCOUTPUT${V3PROD}.sp3,/home/user/BNCOUTPUT${V3PROD}.clk,258,1,0;\n" 270 270 " euref-ip.net,2101,EUREF01,1,,pass,ETRF2000,RTCM-SSR,0,,,258,2,0\"]}\n" 271 271 " uploadIntr {Length of SP3 and Clock RINEX file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n" … … 325 325 "//user:pass@igs-ip.net:2101/FFMJ00DEU1 RTCM_3.1 DEU 50.09 8.66 no 2\"\n" 326 326 "(7) bnc --key cmbStreams \"CLK11 BLG 1.0;CLK93 CNES 1.0\"\n" 327 "(8) bnc --key uploadMountpointsOut \"products.igs-ip.net,98756,TEST,letmein,IGS14,2,/Users/weber/BNCOUTPUT 0${V3PROD}.clk,,33,3,2;"327 "(8) bnc --key uploadMountpointsOut \"products.igs-ip.net,98756,TEST,letmein,IGS14,2,/Users/weber/BNCOUTPUT${V3PROD}.clk,,33,3,2;" 328 328 "euref-ip.net,333,TEST2,aaaaa,ETRF2000,2,,,33,5,5\"\n" 329 329 "(9) bnc --key PPP/staTable \"FFMJ00DEU1,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0.1,7777;" -
trunk/BNC/src/bncwindow.cpp
r9437 r9445 1481 1481 // WhatsThis, Upload Corrections 1482 1482 // ----------------------------- 1483 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in different SSR formats. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Select the Ntrip Version that shall be used for data upload. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. If Ntrip Version 2 is chosen, click to the 'User' field to enter a stream upload user name. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>Select a target SSR format (e.g. IGS-SSR) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNCOUTPUT 0${V3PROD}.sp3<br>Note that '${V3PROD}' produces the time stamp in the filename, which is related to the RINEX version 3 filename concept.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNCOUTPUT0${V3PROD}.clk<br>Note that '${V3PROD}' produces the time stamp in the filename, which is related to the RINEX version 3 filename concept.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table. <i>[key: uploadMountpointsOut]</i></p>"));1483 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in different SSR formats. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Select the Ntrip Version that shall be used for data upload. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. If Ntrip Version 2 is chosen, click to the 'User' field to enter a stream upload user name. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>Select a target SSR format (e.g. IGS-SSR) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNCOUTPUT${V3PROD}.sp3<br>Note that '${V3PROD}' produces the time stamp in the filename, which is related to the RINEX version 3 filename concept.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNCOUTPUT${V3PROD}.clk<br>Note that '${V3PROD}' produces the time stamp in the filename, which is related to the RINEX version 3 filename concept.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table. <i>[key: uploadMountpointsOut]</i></p>")); 1484 1484 addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>")); 1485 1485 delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Corrections' table.</p>"));
Note:
See TracChangeset
for help on using the changeset viewer.