Changeset 9155 in ntrip


Ignore:
Timestamp:
Sep 30, 2020, 10:16:43 PM (4 years ago)
Author:
stuerze
Message:

minor changes

Location:
trunk/BNC/src
Files:
2 edited

Legend:

Unmodified
Added
Removed
  • trunk/BNC/src/bnchelp.html

    r9092 r9155  
    12881288<p><h4 id="proxy">2.2.1 Proxy - Usage in a protected LAN</h4></p>
    12891289<p>
    1290 If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p>
     1290If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator. Without any entry, BNC will try to use the system proxies.</p>
    12911291<p>
    12921292Note that IP streaming is often not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcaster you need to access. If this is not possible, you might need to run BNC outside your LAN on a host that has unobstructed connection to the Internet.
     
    20242024</pre>
    20252025<p>
    2026 contains 
     2026contains
    20272027</p>
    20282028<ul>
     
    20452045<p><h4 id="reqcplots">2.6.5 Plots for Signals - mandatory if 'Action' is set to 'Analyze'</h4></p>
    20462046<p>
    2047 BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify the observation signals to be used for that and also enables the plot production. 
    2048 You can specify the navigation system (C = BDS, E = Galileo, G = GPS, J = QZSS, R = GLONASS, S = SBAS), the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency 
    2049 and tracking mode or channel must be separated by ampersand character '&'. Specifications for each navigation systems must be separated by blank character ' '. 
     2047BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify the observation signals to be used for that and also enables the plot production.
     2048You can specify the navigation system (C = BDS, E = Galileo, G = GPS, J = QZSS, R = GLONASS, S = SBAS), the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency
     2049and tracking mode or channel must be separated by ampersand character '&'. Specifications for each navigation systems must be separated by blank character ' '.
    20502050
    20512051<p>Examples for 'Plots for signals' option:<ul><li> G:1&2&5 R:1&2&3 J:1&2 E:1&7 C:1&6 S:1<br>
    2052 (Plots will be based on GPS observations on 1st, 2nd and 5th frequency, GLONASS observations on 1st, 2nd and 3rd frequency, 
    2053 QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 
     2052(Plots will be based on GPS observations on 1st, 2nd and 5th frequency, GLONASS observations on 1st, 2nd and 3rd frequency,
     2053QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on
    205420541st and 6th frequency, SBAS observations on 1st frequency.)
    20552055</li>
     
    20602060</p>
    20612061<p>
    2062 Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default. 
     2062Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default.
    20632063</p>
    20642064
     
    26842684
    26852685<p>
    2686 Each epoch in the synchronized output begins with a line containing the GPS Week Number and the seconds within the GPS Week. Following lines begin with the mountpoint string of the stream which provides the observations followed by a satellite number. Specifications for satellite number, code, phase, doppler and signal strength data follow definitions presented in the RINEX Version 3 documentation. In case of phase observations, a 'Slip Counter' is added. The end of an epoch is indicated by an empty line. 
     2686Each epoch in the synchronized output begins with a line containing the GPS Week Number and the seconds within the GPS Week. Following lines begin with the mountpoint string of the stream which provides the observations followed by a satellite number. Specifications for satellite number, code, phase, doppler and signal strength data follow definitions presented in the RINEX Version 3 documentation. In case of phase observations, a 'Slip Counter' is added. The end of an epoch is indicated by an empty line.
    26872687</p>
    26882688
  • trunk/BNC/src/src.pri

    r9025 r9155  
    137137}
    138138
    139 # Check QtWebEngineWidges Library Existence
     139# Check QtWebEngineWidgets Library Existence
    140140# -----------------------------------------
    141141exists("$$[QT_INSTALL_LIBS]/*WebEngineWidgets*") {
Note: See TracChangeset for help on using the changeset viewer.