Index: branches/BNC_2.12/src/bnchelp.html =================================================================== --- branches/BNC_2.12/src/bnchelp.html (revision 8457) +++ branches/BNC_2.12/src/bnchelp.html (revision 8464) @@ -1892,28 +1892,88 @@
-
-In the epoch-specific output every PRN follows its elevation and azimuth, as well as the number of observations types.
-For every observation type a letter for phase and code follows where 's' means cycle slip, 'g' gap and '.' means OK.
-For phase observations the signal-to-noise ratio follows, for code observations the multipath standard deviation.
-
-Note that in addition to cycle slips recorded in the RINEX 'file', cycle slips identified by BNC are reported as 'found'.
-
-Multipath and signal-to-noise sky plots as well as plots for satellite availability, elevation and PDOP are produced per GNSS system and frequency with the multipath analysis based on CnC observation types (n = band / frequency). The 'Plots for signals' option lets you exactly specify the observation signals to be used for that and also enables the plot production. You can specify the navigation system (C = BDS, E = Galileo, G = GPS, J = QZSS, R = GLONASS, S = SBAS), the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for each navigation systems must be separated by blank character ' '. The following string is an example for option field 'Plots of signals':
-
-
- C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 --This default configuration will present: -
+The epoch-specific output +
+ ++Each 'Epoch Record' contains 9 parameters. Example: +
++> 2015 09 09 13 04 50.0000000 23 1.2 ++
+Their meaning is as follows: +
++Each of the 'Satellite Records' in such an epoch block carries information for one specific satellite. Example: +
++R10 49.67 46.84 8 L1C .. 52.3 C1C . 0.62 L1P .. 51.2 C1P . 0.52 L2C .. 42.9 C2C . 0.51 L2P .. 42.4 C2P . 0.40 ++
+A satellite-specific line starts with: +
++An observation type block, for example +
++L1C s. 34.3 or C1P . 0.52 ++
+contains +
++With respect to the summary note, that in addition to cycle slips recorded in the RINEX 'file', cycle slips identified by BNC are reported as 'found'. +
+ ++BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify the observation signals to be used for that and also enables the plot production. +You can specify the navigation system (C = BDS, E = Galileo, G = GPS, J = QZSS, R = GLONASS, S = SBAS), the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency +and tracking mode or channel must be separated by ampersand character '&'. Specifications for each navigation systems must be separated by blank character ' '. + +
Examples for 'Plots for signals' option:
+Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default.