Changeset 7891 in ntrip

Apr 29, 2016, 4:03:52 PM (6 years ago)

ADD: ChangeLog

1 edited


  • trunk/BNC/ChangeLog.txt

    r7887 r7891  
    1 ---------------------------------------------------------------------
    2  BNC VERSION 2.13.0 (xx.xx.xxxx)
    3 ---------------------------------------------------------------------
     2 BNC VERSION 2.13.0 (xx.xx.xxxx) current
    54    ??
    6     FIXED    (21.04.2016): RINEX v2 file naming for observation files
    7     CHANGED  (19.04.2016): start with BNC VERSION 2.13.0
    9 ---------------------------------------------------------------------
     5    Changed (19.04.2016): start with BNC VERSION 2.13.0
     6    Fixed   (21.04.2016): RINEX v2 file naming for observation files
    109 BNC VERSION 2.12.0 (19.04.2016)
    11 ---------------------------------------------------------------------
    12     RELEASED (19.04.2016): branch BNC 2.12 created
    15 ---------------------------------------------------------------------
    16  BNC VERSION x.x.x (xx.xx.20xx)
    17 ---------------------------------------------------------------------
     11    Added: Observation code selection in RINEX file editing
     12    Added: Machine-readable output of RINEX QC
     13    Added: PPP client functionality for parallel processing of an arbitrary number of stations in separate threads
     14    Added: NMEA output for any station processed in PPP mode
     15    Added: PPP processing of any number of linear combinations of GNSS measurements selected by user
     16    Added: Encoding/Decoding RTCM SSR I messages for Galileo, BDS, SBAS and QZSS
     17    Added: Encoding/Decoding RTCM SSR phase bias messages
     18    Added: Encoding/Decoding RTCM SSR ionospheric model messages, single-layer model for total electron content
     19    Added: RTCM SSR I messages for Galileo, BDS, SBAS and QZSS support from RTNET interface
     20    Added: RTCM SSR II messages (phase biases and SSR ionospheric model) support from RTNET interface
     21    Added: Computataion of VTEC and STEC from SSR ionospheric model messages for usage in PPP mode
     22    Added: Handle old-fashioned SNR values in RINEX
     23    Added: Comparison of SP3 files
     24    Added: Encoding/Decoding of RTCM v3 proposal for Galileo Broadcast Ephemeris message 1046
     25    Added: Encoding/Decoding of RTCM v3 QZSS Broadcast Ephemeris message 1044
     26    Added: Encoding/Decoding of RTCM v3 SBAS Broadcast Ephemeris message 1043
     27    Added: Encoding/Decoding of RTCM v3 BDS Broadcast Ephemeris message 63
     28    Added: RINEX v3 support of Galileo, BDS, SBAS and QZSS Broadcast Ephemerides
     29    Added: Consideration of the aspect that Galileo NAV message can be provided for the same epoch but with different flags (I/NAV, F/NAV, DVS)
     30    Added: Forwarding NMEA GNGGA to Ntrip Broadcaster
     31    Added: Compute IODs for BDS and SBAS from CRC over broadcast ephemeris and clock parameters
     32    Added: Example configuration for SP3 file comparison
     33    Added: Choose between code and phase observations when in PPP SSR I mode
     34    Added: Broadcast ephemeris check regarding allowed age of data sets
     35    Added: Code bias usage for PPP SSR I mode
     36    Added: Code bias, phase bias and VTEC usage in extended PPP mode
     37    Added: Allow GPS-only and GLONASS-only RINEX v2 Navigation files
     38    Added: Support Galileo I/NAV broadcast ephemeris
     39    Added: Extended RINEX v3 filenames
     40    Added: Stream's country added to configuration string 'mountPoints'
     41    Added: destinction of GEO/MEO satellites during BDS velocity derermination
     42    Added: Set TOE from BDS week and second
     43    Added: Use BDS observations and ephemerides in PPP SSR I mode
     44    Added: Considering that yaw angle restricted to -180 to +180 deg
     45    Added: Update interval for VTEC in RTNET stream format
     46    Added: Phase shift records in RINEX v3 headers
     47    Added: Output GLONASS slot numbers from scanning stream content
     48    Added: Decoder interface for PPP SSR I+II messages for Galileo/QZSS/SBAS/BDS
     49    Added: RINEX QC, receiver/antenna information editable
     50    Added: Support of new RINEX header lines regarding phase shifts, GLONAQSS slots and GLONASS biases during file merging
     51    Added: Switch to port 443 for skeleton file download from https website
     52    Added: SINEX Troposphere file output
     53    Added: Comments with respect to RINEX v3 to RINEX v2 observation file conversion
     54    Added: String for Operating System in logfile output
     55    Added: Full integration of 'rtcm3torinex'
     56    Added: Extended command line help
     57    Changed: RINEX file concatenation
     58    Changed: Routine handling of data input and output in RINEX format re-written
     59    Changed: QC routines re-written with the goal of handling all signal types
     60    Changed: SNR and MP visualization depending on RINEX observation attribute
     61    Changed: PPP default options
     62    Changed: Consideration of the full antenna PCO vector in all PPP modes
     63    Changed: SSR clock correction converted to seconds to be consistent with broadcast values
     64    Changed: Read local RINEX skeleton files
     65    Changed: Renaming BDS first frequency from '1' to '2'
     66    Changed: Default observation types for RINEX v3 files
     67    Fixed: Receiver antenna PCO in ionosphere-free PPP mode
     68    Fixed: Saastamoinen tropospheric correction for very high elevation receivers
     69    Fixed: VRS support in sending NMEA in Auto/Manual mode to Ntrip Broadcaster
     70    Fixed: Stream failure/recovery reports
     71    Fixed: Reset time series plot when restarting PPP in post processing mode
     72    Fixed: Velocity determination for geostationary BDS satellites
     73    Fixed: SBAS IODN
     74    Fixed: Galileo week number
     75    Fixed: RTCM v2 decoder
     78 BNC VERSION 2.11 (Sept-2014)
     80    Added: Raw stream output through TCP/IP port
     81    Changed: SIRGAS transformation parameters adjusted
     82    Changed: ANTEX file updated
     83    Changed: RTCM SSR messages updated
     84    Changed: Maximum number of GNSS observations increased
     85    Changed: Loss of lock handling changed
     86    Fixed: GLONASS code biases
     89 BNC VERSION 2.10 (Dec-2013)
     91    Added: Transformation ITRF2008 to NAD83 and DREF91
     92    Added: CodeBias added to RTNET stream format
     93    Added: Feed engine output sorted per stream
     94    Added: Feed engine output filename change on-the-fly
     95    Added: 'Append files' option for RINEX observation files
     96    Added: RTCM v3 Galileo Broadcast Ephemeris message 1046
     97    Added: Reset ambiguities in PPP when orbit/clock correction IDs change
     98    Added: Satellite clock offsets are reset in adjustment for combination when orbit/clock correction IDs change
     99    Changed: Made C1 in BeiDou default observation type instead of C2
     100    Changed: Broadcast Correction ASCII file output for message 1058 & 1064 modified
     101    Fixed: Clock RINEX und SP3 file generation on Windows systems
     102    Fixed: Broadcast Ephemeris generation
     103    Fixed: GPS L2 in 'Feed Engine' output
     104    Fixed: GPS L2 phase data in RINEX2
     105    Fixed: GLONASS frequency numbers
     108 BNC VERSION 2.9 (Jul-2013)
     110    Added: Include Galileo in SPP
     111    Added: RINEX QC multipath an SNR sky plots for GLONASS and Galileo
     112    Added: Bias estimation for GLONASS clocks in PPP
     113    Added: Trace positions on GM or OSM maps
     114    Changed: Format for feeding a connected GNSS engine
     115    Changed: RTNET format for receiving data from a connected GNSS engine
     116    Fixed: SSR stream upload buffering disabled
     119 BNC VERSION 2.8 (Mar-2013)
     121    Added: Concatenate RINEX v3 navigation files containing Galileo ephemeris
     122    Added: Correcting clocks for scale factor involved in transformation
     123    Changed: Started work on new version in Sep 2012
     124    Changed: Plausibility check of GLONASS ephemeris
     125    Changed: Orbit/clock interpolation in SSR stream encoding and upload to caster
     126    Fixed: Epoch special event flag in RINEX concatenation
     127    Fixed: Limit RINEX v2 records length to 80 characters
     128    Fixed: SSR message update interval indicator
     129    Fixed: Fixed SSR stream encoding and upload
     132 BNC VERSION 2.7 (Sept-2012)
     134    Added: Clock RINEX file header extended
     135    Added: Decoding/converting BeiDou and QZSS added
     136    Added: Work on RINEX v2 and v3 quality check started
     137    Added: QWT and QWTPOLAR graphics libraries added
     138    Added: RINEX QC through multipath analysis sky plot
     139    Added: RINEX QC through signal-to-noise ratio sky plot
     140    Added: RINEX QC through satellite availability plot
     141    Added: RINEX QC through satellite elevation plot
     142    Added: RINEX QC through PDOP plot
     143    Added: Log observation types contained in RTCM Version 3 MSM streams
     144    Added: Reading RINEX v3 observation type header records from RINEX skeleton files
     145    Added: Logfile for RINEX file editing and concatenation
     146    Added: Save PNG plot files on disk
     147    Added: Plot stream distribution map from selected sources
     148    Changed: Source code completely re-arranged
     149    Changed: Plot stream distribution map from Ntrip Broadcaster source-table
     150    Fixed: Bug in L5 decoding fixed
     151    Fixed: Bug in on-the-fly configuration fixed
     152    Fixed: Short periodic outages in PPP time series when 'Sync Corr' set to zero
     155 BNC VERSION 2.6 (Apr-2011)
     157    Added: Complete integration of BNS in BNC
     158    Added: SP3 and Clock RINEX output
     159    Added: PPP in post processing Mode
     160    Added: Some RINEX editing & QC functionality
     161    Added: Threshold for orbit outliers in combination solution
     162    Added: Real-time engine becomes orbit/clock server instead of client
     163    Added: Correction for antenna eccentricities
     164    Added: Quick start mode for PPP
     165    Added: SSL/TLS Support of Ntrip Version 2
     166    Added: RINEX editing, concatenation and quality check
     167    Added: Reading all configuration options from command line
     168    Added: Specific rates for orbits and clocks in streams and SP3/RNX files
     169    Changed: 'EOE' added to orbit/clock stream from engine
     170    Changed: Design of format for feeding engine changed to follow RINEX v3
     171    Changed: Implementation of SSR message encoding modified according to standard
     172    Changed: Switch to Qt version 4.7.3
     173    Changed: RTCM v3 Galileo Broadcast Ephemeris message 1045
     174    Changed: Change default configuration file suffix from 'ini' to 'bnc'
     177 BNC VERSION 2.5 (Feb-2011)
     179    Added: PPP option for sync of clock observations and corrections
     180    Added: Drafted RTCM v3 Galileo ephemeris messages 1045
     181    Added: Drafted RTCM v3 Multiple Signal Messages
     182    Added: Optional specification of sigmas for coordinates and troposphere in PPP
     183    Added: Include Galileo in SPP
     184    Added: Include Galileo observations in output via IP port
     185    Added: Include Galileo observations in output via RINEX v3 files
     186    Added: Correct observations for Antenna Phase Center offsets
     187    Added: Combine orbit/clock correction streams
     188    Added: Specify corrections mountpoint in PPP panel
     189    Changed: Interface format for feeding a real-time engine with observations
     192 BNC VERSION 2.4 (Dec-2010)
     194    Added: Output of averaged positions when in PPP mode
     195    Added: QuickStart PPP option
     196    Added: Sigmas for observations and parameters
     197    Added: Stream distribution map
     198    Changed: Use always the latest received set of Broadcast Ephemeris
     199    Changed: Improvement of data sharing efficiency among different threads
     200    Changed: Design of PPP panel section
     201    Fixed: GPS Ephemeris in RINEX v3 format
     204 BNC VERSION 2.3 (Aug-2010)
     206    Changed: Internal format for saving raw streams
     207    Changed: Format of PPP logs in logfile
     208    Fixed: Outlier detection in GLONASS ambiguity resolution
     209    Fixed: Complete acceleration terms for GLONASS ephemeris
     210    Fixed: Handling ephemeris IOD's in PPP mode
     213 BNC VERSION 2.2 (Jul-2010)
     215    Fixed: GLONASS ephemeris time
     218 BNC VERSION 2.1 (Jun-2010)
     220    Added: PPP in post processing mode
     221    Changed: Update of SSR messages following draft dated 2010-04-12
     222    Changed: Generating error message when observation epoch is wrong
     223    Fixed: SSR GLONASS message generation
     226 BNC VERSION 2.0 (Feb-2010)
     228    Added: Real-time PPP option
     229    Changed: Change sign of Broadcast Corrections
     232 BNC VERSION 1.8 (Nov-2009)
     234    Changed: On-the-fly reconfiguration of latency and throughput plots
     237 BNC VERSION 1.7 (Nov-2009)
     239    Added: Upgrade to Qt Version 4.5.2
     240    Added: Support of Ntrip v2
     241    Added: Rover support via serial port
     242    Added: Show broadcaster table from
     243    Added: Enable/disable panel widgets
     244    Added: User defined configuration filename
     245    Added: Daily logfile rotation
     246    Added: Read from TCP/IP port, by-pass Ntrip transport protocol
     247    Added: Save NMEA sentences coming from rover
     248    Added: Auto start
     249    Added: Drag and drop ini files
     250    Added: Read from serial port, by-pass Ntrip transport protocol
     251    Added: Read from UPD port, by-pass Ntrip transport protocol
     252    Added: Throughput plot
     253    Added: Latency plot
     254    Changed: Switch to configuration files in ini-Format
     255    Changed: Update of SSR messages following RTCM 091-2009-SC104-542
     256    Changed: Output format of Broadcast Corrections
     257    Fixed: RINEX Navigation file format
     260 BNC VERSION 1.6.1 (Dec-2008)
     262    Changed: HTTP GET when no proxy in front
     265 BNC VERSION 1.6 (Dec-2008)
     267    Added: RTCM v3 decoder for orbit and clock corrections
     268    Added: Check RTCM v3 streams for incoming message types
     269    Added: Decode RTCM v2 message types 3, 20, 21, and 22
     270    Added: Loss of lock and lock time indicator
     271    Added: Leap second 1 January 2009
     272    Added: Offline mode, read data from file
     273    Added: Output antenna descriptor, coordinates and eccentricities from RTCM v3
     274    Added: Reconfiguration on-the-fly
     275    Added: Binary output of unsynchronized observations
     276    Changed: Fill blank columns in RINEX v3 with 0.000
     277    Changed: Accept GLONASS in RTCM v3 when transmitted first
     278    Changed: Binary output of synchronized observations
     279    Fixed: Rounding error in RTCM v3 decoder concerning GLONASS height
     280    Fixed: Fixed problem with joined RTCM v3 blocks
     283 BNC VERSION 1.5 (Apr-2008)
     285    Added: Handle ephemeris from RTCM Version 3 streams
     286    Added: Upgrade to Qt Version 4.3.2
     287    Added: Optional RINEX v3 output
     288    Added: SBAS support
     289    Added: Handle ephemeris from RTIGS streams
     290    Added: Monitor stream failure/recovery and latency
     291    Changed: Redesign of main window
     292    Changed: Major revision of input buffer in RTCM v2 decoder
     293    Fixed: RINEX skeleton download following stream outage
     294    Fixed: Freezing of About window on Mac OS X
     295    Fixed: Fixed problem with PRN 32 in RTCM v2 decoder
     296    Fixed: Fix for Trimble 4000SSI receivers in RTCM v2 decoder
     299 BNC VERSION 1.4 (Jul-2007)
     301    Fixed: Skip messages from proxy server
     302    Fixed: Call RINEX script through 'nohup'
     305 BNC VERSION 1.3 (May-2007)
     307    Added: Source code published
     310 BNC VERSION 1.2b (Apr-2007)
     312    Added: ZERO decoder added
     313    Added: HTTP Host directive for skeleton file download
     314    Added: Percent encoding for user IDs and passwords
     315    Changed: Download public RINEX skeletons once per day
     316    Changed: Upgrade to Qt Version 4.2.3
     317    Changed: Replace 'system' call for RINEX script by 'QProcess'
     318    Fixed: Output only through IP port
     319    Fixed: Method 'reconnecting' now thread-save
     320    Fixed: Exit execution of calling thread for RTCM3 streams
     321    Fixed: Signal-slot mechanism for threads
     324 BNC VERSION 1.1b (Jan-2007)
     326    Added: Observables C2, S1, and S2
     327    Added: Virtual reference station access
     328    Added: Online help through Shift+F1
     329    Changed: Small letters for public RINEX skeleton files
     330    Fixed: RTCM2 decoder time tag fixed
     333 BNC VERSION 1.0b (Dec-2006)
     335    initial version published based on Qt 4.2.3
Note: See TracChangeset for help on using the changeset viewer.