If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.
Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.
")); _proxyPortLineEdit->setWhatsThis(tr("Enter your proxy server port number in case a proxy is operated in front of BNC.
")); - _sslCaCertPathLineEdit->setWhatsThis(tr("Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved Ntrip Broadcaster.
Note that SSL communication is usually done over port 443.
")); - _sslIgnoreErrorsCheckBox->setWhatsThis(tr("SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.
")); + _sslCaCertPathLineEdit->setWhatsThis(tr("Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.
Note that SSL communication is usually done over port 443.
")); + _sslIgnoreErrorsCheckBox->setWhatsThis(tr("SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.
")); // WhatsThis, General @@ -1269,10 +1269,10 @@ _reqcLogSummaryOnly->setWhatsThis(tr("By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.
Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.
")); _reqcPlotDirLineEdit->setWhatsThis(tr("Specify a directory for saving plots in PNG format.
Default is an empty option field, meaning that plots will not be saved on disk.
")); - _reqcSkyPlotSignals->setWhatsThis(tr("BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for fequency and tracking mode or channel must be seperated by ampersand character '&'. Specifications for navigation systems must be seperated by blank character ' '.
Examples for 'Plots for signals' option:
Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5'. Specifying an empty option string would be overruled by this default.
")); + _reqcSkyPlotSignals->setWhatsThis(tr("BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.
Examples for 'Plots for signals' option:
Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5'. Specifying an empty option string would be overruled by this default.
")); // WhatsThis, SP3 Comparison // ------------------------- _sp3CompFileChooser->setWhatsThis(tr("BNC can compare two SP3 files containing GNSS satellite orbit and clock information.
Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.")); - _sp3CompExclude->setWhatsThis(tr("Specify satellites to exclude them from orbit and clock comparision. Example:
G04,G31,R
This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparision.
Default is an empty option field, meaning that no satellite is excluded from the comparison.
")); + _sp3CompExclude->setWhatsThis(tr("Specify satellites to exclude them from orbit and clock comparison. Example:
G04,G31,R
This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.
Default is an empty option field, meaning that no satellite is excluded from the comparison.
")); _sp3CompLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile saving comparison results.
Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.
")); @@ -1316,10 +1316,10 @@ _miscMountLineEdit->setWhatsThis(tr("Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.
An empty option field (default) means that you don't want BNC to apply any of these options.
")); _miscIntrComboBox->setWhatsThis(tr("BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).
Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.
")); - _miscScanRTCMCheckBox->setWhatsThis(tr("Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.
In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.
.")); + _miscScanRTCMCheckBox->setWhatsThis(tr("Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.
In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.
.")); _miscPortLineEdit->setWhatsThis(tr("BNC can output an incoming stream through an IP port of your local host.
Specify a port number to activate this function.
")); // WhatsThis, PPP (1) // ------------------ - _pppWidgets._dataSource->setWhatsThis(tr("Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.
Note that BNC allows to carry out PPP solutions simultaneously for several stations.
")); + _pppWidgets._dataSource->setWhatsThis(tr("Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.
Note that BNC allows to carry out PPP solutions simultaneously for several stations.
")); _pppWidgets._rinexObs->setWhatsThis(tr("Specify the RINEX Observation file.
")); _pppWidgets._rinexNav->setWhatsThis(tr("Specify the RINEX Navigation file.
")); @@ -1327,5 +1327,5 @@ _pppWidgets._corrFile->setWhatsThis(tr("Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.
If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.
")); _pppWidgets._antexFile->setWhatsThis(tr("Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for
If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.
")); - _pppWidgets._crdFile->setWhatsThis(tr("Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:
Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.
")); + _pppWidgets._crdFile->setWhatsThis(tr("Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:
Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.
")); _pppWidgets._v3filenames->setWhatsThis(tr("Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.
Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.
")); _pppWidgets._logPath->setWhatsThis(tr("Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.
Default is an empty option field, meaning that no PPP logfiles shall be produced.
")); @@ -1333,5 +1333,5 @@ _pppWidgets._snxtroPath->setWhatsThis(tr("Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.
Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.
")); _pppWidgets._snxtroIntr->setWhatsThis(tr("Select a length for SINEX Troposphere files.
Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.
")); - _pppWidgets._snxtroSampl->setWhatsThis(tr("Select a 'Sampling' rate for saving troposphere paramers.
Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk.
")); + _pppWidgets._snxtroSampl->setWhatsThis(tr("Select a 'Sampling' rate for saving troposphere parameters.
Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk.
")); // WhatsThis, PPP (3) @@ -1339,14 +1339,14 @@ _pppWidgets._lcGPS->setWhatsThis(tr("Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.
Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.
Specifying 'no' means that you don't want BNC to use GPS data.
")); _pppWidgets._lcGLONASS->setWhatsThis(tr("Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.
Specifying 'no' means that you don't want BNC to use GLONASS data.
")); - _pppWidgets._lcGalileo->setWhatsThis(tr("Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.
Specifying on of these options makes only sense if Galileo data are part ot the processed observation stream.
Specifying 'no' means that you don't want BNC to use Galileo data.
")); - _pppWidgets._lcBDS->setWhatsThis(tr("Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.
Specifying on of these options makes only sense if BDS data are part ot the processed observation stream.
Specifying 'no' means that you don't want to use BDS data.
")); + _pppWidgets._lcGalileo->setWhatsThis(tr("Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.
Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.
Specifying 'no' means that you don't want BNC to use Galileo data.
")); + _pppWidgets._lcBDS->setWhatsThis(tr("Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.
Specifying on of these options makes only sense if BDS data are part of the processed observation stream.
Specifying 'no' means that you don't want to use BDS data.
")); _pppWidgets._sigmaC1->setWhatsThis(tr("Enter a Sigma for GNSS C1 code observations in meters.
The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.
Default is an empty option field, meaning
'Sigma C1 = 2.0'
Enter a Sigma for GNSS L1 phase observations in meters.
The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.
Default is an empty option field, meaning
'Sigma L1 = 0.01'
Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choise for that.
If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.
Default is an empty option field, meaning
'Max Rex C1 = 3.0'
Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choise for that.
If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.
Default is an empty option field, meaning
'Max Rex L1 = 0.03'
Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.
If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.
Default is an empty option field, meaning
'Max Rex C1 = 3.0'
Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.
If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.
Default is an empty option field, meaning
'Max Rex L1 = 0.03'
Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.
")); _pppWidgets._eleWgtPhase->setWhatsThis(tr("Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.
")); _pppWidgets._minObs->setWhatsThis(tr("Select a Minimum Number of Observations per epoch for a PPP solution.
BNC will only process epochs with observation numbers reaching or exceeding this minimum.
")); - _pppWidgets._minEle->setWhatsThis(tr("Select a Minimum satellite Elevation for observations.
BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.
Selecting '10 deg' may be an appropriate choise in order to avoid too noisy observations.
")); + _pppWidgets._minEle->setWhatsThis(tr("Select a Minimum satellite Elevation for observations.
BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.
Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.
")); // WhatsThis, Combine Corrections @@ -1394,5 +1394,5 @@ // --------------------- _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.
")); - _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps).
")); + _bncFigure->setWhatsThis(tr("The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).
")); _bncFigureLate->setWhatsThis(tr("The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.
Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.
")); _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.
Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.
"));