Changeset 7663 in ntrip for trunk/BNC/src/pppWidgets.cpp

Timestamp:

Jan 11, 2016, 11:37:25 AM (8 years ago)

Author:

weber

Message:

Documentation completed

File:

• trunk/BNC/src/pppWidgets.cpp (modified) (1 diff)

trunk/BNC/src/pppWidgets.cpp

@@ -182 +182 @@
   // WhatsThis, PPP (2)
   // ------------------
-  _staTable->setWhatsThis(tr("<p>Specify values for Sigma and white Noise of the Stations North, East and Height coordinates in meters. Specify also a Sigma in meters for a priori model based Tropospheric delays and for the delay's Noise in meters per second.</p><p>Specifying one record per station is mandatory. BNC will only process data for stations wich are listed here.</p><p>'Sigma' is meant to describe the uncertainty of a single coordinate or tropospheric delay estimated for one epoch. 'Noise' is meant to describe the variation of estimates from epoch to epoch.</p><p><ul><li>A Sigma of 100.0 meters may be an appropriate choice e.g. for the initial N/E/H coordinates. However, this value may be significantly smaller (i.e. 0.01) for stations with well known a priori coordinates.</li><li>A Noise of 100.0 meters for the estimated N/E/H coordinates may also be appropriate considering the potential movement of a rover position.</li><li>A value of 0.1 meters may be an appropriate Sigma for the a priori model based Tropospheric delay estimation.</li><li>Specify a Noise to describe the expected variation of the tropospheric effect over time. Supposing 1Hz observation data, specifying a value of 3e-6 would mean that the tropospheric effect may vary 3600 * 3e-6 = 0.01 meters per hour.</li></ul></p>"));
+  _staTable->setWhatsThis(tr("<p>Specify values for Sigma and white Noise of the Stations North, East and Height coordinate components in meters. Specify also a Sigma in meters for a priori model based Tropospheric delays and a Sigma in meters per second for the delay's Noise.</p><p>Specifying one record per Station is mandatory. BNC will only process data for stations wich are listed here. To define a station, specify the 'Mountpoint' when in 'Real-Time Streams' mode or the 4-character station ID when in 'RINEX Files' mode.</p><p>'Sigma' is meant to describe the uncertainty of a single coordinate or tropospheric delay estimated for one epoch. 'Noise' is meant to describe the variation of estimates from epoch to epoch.</p><p><ul><li>A Sigma of 100.0 meters may be an appropriate choice e.g. for the initial N/E/H coordinates. However, this value may be significantly smaller (i.e. 0.01) for stations with well known a priori coordinates.</li><li>A Noise of 100.0 meters for the estimated N/E/H coordinates may also be appropriate considering the potential movement of a rover position.</li><li>A value of 0.1 meters may be an appropriate Sigma for the a priori model based Tropospheric delay estimation.</li><li>Specify a Noise to describe the expected variation of the tropospheric effect over time. Supposing 1Hz observation data, specifying a value of 3e-6 would mean that the tropospheric effect may vary 3600 * 3e-6 = 0.01 meters per hour.</li></ul></p><p>You can also specify a 'NMEA Port' to output coordinates in NMEA format through an IP port of your local host.</p>"));
 
   // WhatsThis, PPP (3)
   // ------------------
-  _seedingTime->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solutions to known a priori coordinates as introduced through option 'Coordinates'. Adjust 'Sigma N/E/H' in the PPP Stations table according to the coordinates precision. Fixing a priori coordinates is done in BNC through setting 'Sigma N/E/H' temporarily to zero.</p><p>This option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the a priori known position throughout the startup period.</p><p>A value of 60 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning that you don't want BNC to fix the PPP solutions during startup to known a priori coordinates.</p>"));
-
-  _corrWaitTime->setWhatsThis(tr("<p>Specifying 'no' means that BNC will not wait for clock corrections and process each epoch of observation data immediately after arrival using the satellite clock corrections available at that time.</p><p>Specifying a non-zero value (i.e. 5 sec) means that data will be buffered and the processing of each buffered epoch is postponed till satellite clock corrections not older than '5 sec' (example) become available.</p>"));
-
-  _plotCoordinates->setWhatsThis(tr("<p>BNC allows to produce a time series plot of coordinate displacements for one of your PPP stations in the 'PPP Plot' tab below. Specify a 'Mountpoint' (when in 'Real-Time Streams' mode) or the 4-character station ID (when in 'RINEX Files' mode) to define the station whose coordinate displacements you would like to see plotted.</p><p>Note that this option makes only sense for a stationary receiver with known a priori marker coordinates as specified through PPP option 'Coordinates'.</p><p>Default is an empty option field, meaning that BNC shall not produce a time series plot of PPP coordinate displacements.</p>"));
-
-  _mapWinButton->setWhatsThis(tr("<p>You make like to track your rover position using Google Maps or Open Street Map as a background map. Track maps can be produced with BNC in 'Realtime-PPP', 'Realtime-SPP' and 'Post-Processing' mode.</p><p>The 'Open Map' button opens a windows showing a map according to specified options.</p><p>Even in 'Post-Processing' mode you should not forget to specify a proxy under the 'Network' tab if that is operated in front of BNC because the programm needs to download the map data.</p>"));
-
+  _corrWaitTime->setWhatsThis(tr("<p>Specifying 'no' means that BNC will not wait for satellite clock corrections and process each epoch of observation data immediately after arrival using the corrections available at that time.</p><p>Specifying a non-zero value (i.e. 5 sec) means that data will be buffered and their processing is postponed till corrections not older than '5 sec' (example) become available.</p>"));
+  _seedingTime->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solutions to known a priori coordinates as introduced through option 'Coordinates file'. Adjust 'Sigma N/E/H' in the PPP Stations table according to the coordinate's precision. Fixing a priori coordinates is done in BNC through setting 'Sigma N/E/H' temporarily to zero.</p><p>This option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the a priori known position throughout the startup period.</p><p>A value of 60 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning that you don't want BNC to fix PPP solutions during startup to an a priori coordinate.</p>"));
+
+  // WhatsThis, PPP (4)
+  // ------------------
+  _plotCoordinates->setWhatsThis(tr("<p>For one of your PPP Stations BNC can produce a time series plot of coordinate displacements in the 'PPP Plot' tab below. Specify a 'Mountpoint' (when in 'Real-Time Streams' mode) or the 4-character station ID (when in 'RINEX Files' mode) to define the station whose coordinate displacements you would like to see plotted.</p><p>Note that this option makes only sense for a stationary receiver with known a priori marker coordinates as specified through PPP option 'Coordinates file'.</p><p>Default is an empty option field, meaning that BNC shall not produce a time series plot of PPP coordinate displacements.</p>"));
+  _audioResponse->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the a priori marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
+  _mapWinButton->setWhatsThis(tr("<p>You make like to track your rover position using Google Maps or Open Street Map as a background map. A 'Track map' can be produced with BNC in 'Real-Time Streams' or 'RINEX files' PPP mode.</p><p>The 'Open Map' button opens a windows showing a map according to specified options.</p><p>Even in 'RINEX files' post processing mode you should not forget to specify a proxy under the 'Network' tab if that is operated in front of BNC because the programm needs to download the map data.</p>"));
   _useGoogleMap->setWhatsThis(tr("<p>Specify Google Maps as the background for your rover positions.</p>"));
-
   _useOpenStreetMap->setWhatsThis(tr("<p>Specify Open Street Map as the background for your rover positions.</p>"));
-
-  _audioResponse->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the a priori marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
-
-  _mapWinDotSize->setWhatsThis(tr("<p>Specify the size of dots showing the rover positions on the track map.</p><p>A dot size of '3' may be appropriate. The maximum possible dot size is '10'. An empty option field or a size of '0' would mean that you don't want BNC to show the rover's track on the map.</p>"));
-
+  _mapWinDotSize->setWhatsThis(tr("<p>Specify the size of dots showing rover positions on the track map.</p><p>A dot size of '3' may be appropriate. The maximum possible dot size is '10'. An empty option field or a size of '0' would mean that you don't want BNC to show the rover's track on the map.</p>"));
   _mapWinDotColor->setWhatsThis(tr("<p>Specify the color of dots showing the rover track on the map.</p>"));
-
-  _mapSpeedSlider->setWhatsThis(tr("<p>With BNC in PPP post-processing mode you can specify the speed of computations as appropriate for 'Track map' visualization. Note that you can adjust 'speed' on-the-fly while BNC is already processing your observations.</p>"));
+  _mapSpeedSlider->setWhatsThis(tr("<p>With BNC in 'RINEX files' PPP post processing mode you can specify the speed of computations as appropriate for 'Track map' visualization.</p><p>Note that you can adjust 'Post-processing speed' on-the-fly while BNC is already processing your observations.</p>"));
 
   readOptions();