Changeset 7581 in ntrip


Ignore:
Timestamp:
Nov 24, 2015, 9:43:02 AM (7 years ago)
Author:
weber
Message:

Documentation completed

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/BNC/Example_Configs/00_Readme.txt

    r7562 r7581  
    194194and clocks in Clock RINEX format.
    195195
    196 17. File 'UploadPPP.bnc'
    197 This configuration equals the 'Upload.bnc' configuration. However, the
    198 Broadcast Corrections are in addition used for an 'INTERNAL' PPP solution based
    199 on observations from a static reference station with known precise coordinates.
    200 This allows a continuous quality check of the Broadcast Corrections through
    201 observing coordinate displacements.
    202 
    203 18. File 'Combi.bnc'
     19617. File 'Combi.bnc'
    204197The purpose of this configuration is to pull several streams carrying
    205198Broadcast Corrections and a Broadcast Ephemeris stream from an Ntrip
     
    210203and clocks in Clock RINEX format.
    211204
    212 19. File 'CombiPPP.bnc'
     20518. File 'CombiPPP.bnc'
    213206This configuration equals the 'Combi.bnc' configuration. However, the
    214207combined Broadcast Corrections are in addition used for an 'INTERNAL' PPP
     
    217210product through observing coordinate displacements.
    218211
    219 20. File 'UploadEph.bnc'
     21219. File 'UploadEph.bnc'
    220213The purpose of this configuration is to pull a number of streams from
    221214reference stations to get hold of contained Broadcast Ephemeris messages. These
     
    223216Ephemeris with an update rate of 5 seconds.
    224217
    225 21. File 'CompareSp3.bnc'
     21820. File 'CompareSp3.bnc'
    226219The purpose of this configuration is to compare two SP3 files to calculate
    227220RMS values for orbit and clock differences. GPS satellite G05 and GLONASS
     
    229222in a logfile.
    230223
    231 22. File 'Empty.bnc'
     22421. File 'Empty.bnc'
    232225The purpose of this example is to provide an empty configuration file for
    233226BNC which only contains the default settings.
Note: See TracChangeset for help on using the changeset viewer.