Index: trunk/BNC/src/bncwindow.cpp =================================================================== --- trunk/BNC/src/bncwindow.cpp (revision 6687) +++ trunk/BNC/src/bncwindow.cpp (revision 6688) @@ -1255,5 +1255,5 @@ _serialAutoNMEAComboBox->setWhatsThis(tr("
Select 'no' if you don't want BNC to forward or upload any NMEA message to the NTRIP broadcaster in support of the 'Virtural Reference Station' concept.
Select 'Auto' to automatically forward NMEA messages of type GPGGA or GNGGA from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.
Select 'Manual' if you want BNC to produce and upload one initial GPGGA NMEA message to the NTRIP broadcaster because your serial connected receiver doesn't generate these messages.
")); _serialFileNMEALineEdit->setWhatsThis(tr("Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.
")); - _serialHeightNMEALineEdit->setWhatsThis(tr("Specify an approximate 'Height' above mean sea level in meters for the transmitting reference station introduced through 'Mountpoint'. Together with the latitude and longitude from the NTRIP broadcaster sourcetable the height information is used to build one initial GPGGA message to be sent to the NTRIP broadcaster.
The setting of this option is ignored if option 'NMEA' is set to 'Auto'.
")); + _serialHeightNMEALineEdit->setWhatsThis(tr("Specify an approximate 'Height' above mean sea level in meters for the transmitting reference station introduced through 'Mountpoint'. Together with the latitude and longitude from the NTRIP broadcaster sourcetable the height information is used to build one initial GPGGA message to be sent to the NTRIP broadcaster.
The setting of this option is ignored if option 'NMEA' is set to 'Auto' or 'no'.
")); _reqcActionComboBox->setWhatsThis(tr("BNC allows to 'Edit or Concatenate' RINEX v2 or v3 files or to perform a quality check and 'Analyze' the data following UNAVCO's famous 'teqc' program.
")); _reqcEditOptionButton->setWhatsThis(tr("Specify options for editing RINEX v2 or v3 files.
"));