Changeset 6687 in ntrip


Ignore:
Timestamp:
Mar 17, 2015, 9:48:49 PM (7 years ago)
Author:
weber
Message:

Documentation completed

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/BNC/src/bncwindow.cpp

    r6686 r6687  
    12531253  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
    12541254  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
    1255   _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA messages of type GPGGA or GNGGA coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' if you want BNC to produce and forward one initial GPGGA NMEA message because your serial connected receiver doesn't generate these messages.</p>"));
     1255  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'no' if you don't want BNC to forward or upload any NMEA message to the NTRIP broadcaster in support of the 'Virtural Reference Station' concept.</p><p>Select 'Auto' to automatically forward NMEA messages of type GPGGA or GNGGA from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' if you want BNC to produce and upload one initial GPGGA NMEA message to the NTRIP broadcaster because your serial connected receiver doesn't generate these messages.</p>"));
    12561256  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
    12571257  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the transmitting reference station introduced through 'Mountpoint'. Together with the latitude and longitude from the NTRIP broadcaster sourcetable the height information is used to build one initial GPGGA message to be sent to the NTRIP broadcaster.</p><p>The setting of this option is ignored if option 'NMEA' is set to 'Auto'.</p>"));
Note: See TracChangeset for help on using the changeset viewer.