Index: /trunk/BNC/bncwindow.cpp
===================================================================
--- /trunk/BNC/bncwindow.cpp	(revision 3896)
+++ /trunk/BNC/bncwindow.cpp	(revision 3897)
@@ -62,9 +62,9 @@
 #include "upload/bncephuploadcaster.h"
 #include "qtfilechooser.h"
-#include "teqcdlg.h"
+#include "reqcdlg.h"
 #ifdef USE_POSTPROCESSING
 #  include "rinex/bncpostprocess.h"
-#  include "rinex/teqcedit.h"
-#  include "rinex/teqcanalyze.h"
+#  include "rinex/reqcedit.h"
+#  include "rinex/reqcanalyze.h"
 #endif
 
@@ -83,8 +83,8 @@
   _runningRealTime           = false;
   _runningPostProcessingPPP  = false;
-  _runningPostProcessingTeqc = false;
+  _runningPostProcessingReqc = false;
 
   _pppSPPComboBox     = 0; // necessary for enableStartStop()
-  _teqcActionComboBox = 0; // necessary for enableStartStop()
+  _reqcActionComboBox = 0; // necessary for enableStartStop()
 
   int ww = QFontMetrics(this->font()).width('w');
@@ -617,5 +617,5 @@
   QWidget* pppgroup = new QWidget();
   QWidget* ppp2group = new QWidget();
-  QWidget* teqcgroup = new QWidget();
+  QWidget* reqcgroup = new QWidget();
   QWidget* cmbgroup = new QWidget();
   QWidget* uploadgroup = new QWidget();
@@ -625,4 +625,5 @@
   _aogroup->addTab(ogroup,tr("RINEX Observations"));
   _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
+  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
   _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
   _aogroup->addTab(sgroup,tr("Feed Engine"));
@@ -632,5 +633,4 @@
   _aogroup->addTab(pppgroup,tr("PPP (1)"));
   _aogroup->addTab(ppp2group,tr("PPP (2)"));
-  _aogroup->addTab(teqcgroup,tr("Teqc"));
 #ifdef USE_COMBINATION
   _aogroup->addTab(cmbgroup,tr("Combination"));
@@ -990,80 +990,80 @@
   ppp2group->setLayout(ppp2Layout);
 
-  // Teqc Processing
+  // Reqc Processing
   // ---------------
-  _teqcActionComboBox = new QComboBox();
-  _teqcActionComboBox->setEditable(false);
-  _teqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
-  ik = _teqcActionComboBox->findText(settings.value("teqcAction").toString());
+  _reqcActionComboBox = new QComboBox();
+  _reqcActionComboBox->setEditable(false);
+  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
+  ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
   if (ik != -1) {
-    _teqcActionComboBox->setCurrentIndex(ik);
-  }
-  connect(_teqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
-          this, SLOT(slotBncTextChanged()));
-
-  QGridLayout* teqcLayout = new QGridLayout;
-  _teqcActionComboBox->setMinimumWidth(15*ww);
-  _teqcActionComboBox->setMaximumWidth(15*ww);
-
-  _teqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
-  _teqcObsFileChooser->setFileName(settings.value("teqcObsFile").toString());
-  _teqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
-  _teqcObsFileChooser->setMinimumWidth(15*ww);
-  _teqcObsFileChooser->setMaximumWidth(15*ww);
-
-  _teqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
-  _teqcNavFileChooser->setFileName(settings.value("teqcNavFile").toString());
-  _teqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
-  _teqcNavFileChooser->setMinimumWidth(15*ww);
-  _teqcNavFileChooser->setMaximumWidth(15*ww);
-
-  _teqcOutObsLineEdit = new QLineEdit(settings.value("teqcOutObsFile").toString());
-  _teqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to an output file."));
-  _teqcOutObsLineEdit->setMinimumWidth(15*ww);
-  _teqcOutObsLineEdit->setMaximumWidth(15*ww);
-
-  _teqcOutNavLineEdit = new QLineEdit(settings.value("teqcOutNavFile").toString());
-  _teqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to an output file."));
-  _teqcOutNavLineEdit->setMinimumWidth(15*ww);
-  _teqcOutNavLineEdit->setMaximumWidth(15*ww);
-
-  _teqcOutLogLineEdit = new QLineEdit(settings.value("teqcOutLogFile").toString());
-  _teqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to an output file."));
-  _teqcOutLogLineEdit->setMinimumWidth(15*ww);
-  _teqcOutLogLineEdit->setMaximumWidth(15*ww);
+    _reqcActionComboBox->setCurrentIndex(ik);
+  }
+  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
+          this, SLOT(slotBncTextChanged()));
+
+  QGridLayout* reqcLayout = new QGridLayout;
+  _reqcActionComboBox->setMinimumWidth(15*ww);
+  _reqcActionComboBox->setMaximumWidth(15*ww);
+
+  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
+  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
+  _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
+  _reqcObsFileChooser->setMinimumWidth(15*ww);
+  _reqcObsFileChooser->setMaximumWidth(15*ww);
+
+  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
+  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
+  _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
+  _reqcNavFileChooser->setMinimumWidth(15*ww);
+  _reqcNavFileChooser->setMaximumWidth(15*ww);
+
+  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
+  _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to an output file."));
+  _reqcOutObsLineEdit->setMinimumWidth(15*ww);
+  _reqcOutObsLineEdit->setMaximumWidth(15*ww);
+
+  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
+  _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to an output file."));
+  _reqcOutNavLineEdit->setMinimumWidth(15*ww);
+  _reqcOutNavLineEdit->setMaximumWidth(15*ww);
+
+  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
+  _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to an output file."));
+  _reqcOutLogLineEdit->setMinimumWidth(15*ww);
+  _reqcOutLogLineEdit->setMaximumWidth(15*ww);
 
   ir = 0;
-  teqcLayout->addWidget(new QLabel("RINEX file editing, quality control or concatenation."),ir, 0, 1, 20);
+  reqcLayout->addWidget(new QLabel("RINEX file editing, quality control or concatenation."),ir, 0, 1, 20);
   ++ir;
-  teqcLayout->addWidget(new QLabel("Action"),                   ir, 0, Qt::AlignLeft);
-  teqcLayout->addWidget(_teqcActionComboBox,                    ir, 1, Qt::AlignLeft);
-  _teqcEditOptionButton = new QPushButton("Set Edit Options");
-  teqcLayout->addWidget(_teqcEditOptionButton,                  ir, 3, Qt::AlignRight);
+  reqcLayout->addWidget(new QLabel("Action"),                   ir, 0, Qt::AlignLeft);
+  reqcLayout->addWidget(_reqcActionComboBox,                    ir, 1, Qt::AlignLeft);
+  _reqcEditOptionButton = new QPushButton("Set Edit Options");
+  reqcLayout->addWidget(_reqcEditOptionButton,                  ir, 3, Qt::AlignRight);
   ++ir;
-  teqcLayout->addWidget(new QLabel("Input files (full path)"),  ir, 0, Qt::AlignLeft);
-  teqcLayout->addWidget(_teqcObsFileChooser,                    ir, 1, Qt::AlignRight);
-  teqcLayout->addWidget(new QLabel("Obs"),                      ir, 2, Qt::AlignLeft);
-  teqcLayout->addWidget(_teqcNavFileChooser,                    ir, 3, Qt::AlignRight);
-  teqcLayout->addWidget(new QLabel("Nav"),                      ir, 4, Qt::AlignLeft);
+  reqcLayout->addWidget(new QLabel("Input files (full path)"),  ir, 0, Qt::AlignLeft);
+  reqcLayout->addWidget(_reqcObsFileChooser,                    ir, 1, Qt::AlignRight);
+  reqcLayout->addWidget(new QLabel("Obs"),                      ir, 2, Qt::AlignLeft);
+  reqcLayout->addWidget(_reqcNavFileChooser,                    ir, 3, Qt::AlignRight);
+  reqcLayout->addWidget(new QLabel("Nav"),                      ir, 4, Qt::AlignLeft);
   ++ir;
-  teqcLayout->addWidget(new QLabel("Output files (full path)"),  ir, 0, Qt::AlignLeft);
-  teqcLayout->addWidget(_teqcOutObsLineEdit,                     ir, 1, Qt::AlignRight);
-  teqcLayout->addWidget(new QLabel("Obs"),                       ir, 2, Qt::AlignLeft);
-  teqcLayout->addWidget(_teqcOutNavLineEdit,                     ir, 3, Qt::AlignRight);
-  teqcLayout->addWidget(new QLabel("Nav"),                       ir, 4, Qt::AlignLeft);
+  reqcLayout->addWidget(new QLabel("Output files (full path)"),  ir, 0, Qt::AlignLeft);
+  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1, Qt::AlignRight);
+  reqcLayout->addWidget(new QLabel("Obs"),                       ir, 2, Qt::AlignLeft);
+  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3, Qt::AlignRight);
+  reqcLayout->addWidget(new QLabel("Nav"),                       ir, 4, Qt::AlignLeft);
   ++ir;
-  teqcLayout->addWidget(_teqcOutLogLineEdit,                     ir, 1, Qt::AlignRight);
-  teqcLayout->addWidget(new QLabel("Log"),                       ir, 2, Qt::AlignLeft);
+  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1, Qt::AlignRight);
+  reqcLayout->addWidget(new QLabel("Log"),                       ir, 2, Qt::AlignLeft);
   ++ir;
-  teqcLayout->addWidget(new QLabel(""), ir, 1);
-  teqcLayout->setRowStretch(ir, 999);
-
-  teqcLayout->setColumnMinimumWidth(2, 8*ww);
-  teqcLayout->setColumnMinimumWidth(4, 8*ww);
-
-  teqcgroup->setLayout(teqcLayout);
-
-  connect(_teqcEditOptionButton, SIGNAL(clicked()), 
-          this, SLOT(slotTeqcEditOption()));
+  reqcLayout->addWidget(new QLabel(""), ir, 1);
+  reqcLayout->setRowStretch(ir, 999);
+
+  reqcLayout->setColumnMinimumWidth(2, 8*ww);
+  reqcLayout->setColumnMinimumWidth(4, 8*ww);
+
+  reqcgroup->setLayout(reqcLayout);
+
+  connect(_reqcEditOptionButton, SIGNAL(clicked()), 
+          this, SLOT(slotReqcEditOption()));
 
   // Combination
@@ -1212,6 +1212,6 @@
   _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combination' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
   _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
-  _teqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality control.</p><p>In this it follows UNAVCO's famous 'teqc' program developed by Lou Estey.</p>"));
-  _teqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
+  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check.</p><p>In this it follows UNAVCO's famous 'teqc' program.</p>"));
+  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
   _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
   _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
@@ -1688,11 +1688,11 @@
   settings.setValue("pppSigTrp0",_pppSigTrp0->text());
   settings.setValue("pppSigTrpP",_pppSigTrpP->text());
-// Teqc
-  settings.setValue("teqcAction",     _teqcActionComboBox->currentText());
-  settings.setValue("teqcObsFile",    _teqcObsFileChooser->fileName());
-  settings.setValue("teqcNavFile",    _teqcNavFileChooser->fileName());
-  settings.setValue("teqcOutObsFile", _teqcOutObsLineEdit->text());
-  settings.setValue("teqcOutNavFile", _teqcOutNavLineEdit->text());
-  settings.setValue("teqcOutLogFile", _teqcOutLogLineEdit->text());
+// Reqc
+  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
+  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
+  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
+  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
+  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
+  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
 // Combination
   if (!combineStreams.isEmpty()) {
@@ -1742,6 +1742,6 @@
     startPostProcessingPPP();
   }
-  else if ( !_teqcActionComboBox->currentText().isEmpty() ) {
-    startPostProcessingTeqc();
+  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
+    startPostProcessingReqc();
   }
   else {
@@ -2284,13 +2284,13 @@
   }
 
-  if (sender() == 0 || sender() == _teqcActionComboBox) {
-    enable = !_teqcActionComboBox->currentText().isEmpty();
-    bool enable10 = _teqcActionComboBox->currentText() == "Edit/Concatenate";
-    enableWidget(enable &&  enable10, _teqcEditOptionButton);
-    enableWidget(enable,              _teqcObsFileChooser);
-    enableWidget(enable,              _teqcNavFileChooser);
-    enableWidget(enable &&  enable10, _teqcOutObsLineEdit);
-    enableWidget(enable &&  enable10, _teqcOutNavLineEdit);
-    enableWidget(enable && !enable10, _teqcOutLogLineEdit);
+  if (sender() == 0 || sender() == _reqcActionComboBox) {
+    enable = !_reqcActionComboBox->currentText().isEmpty();
+    bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
+    enableWidget(enable &&  enable10, _reqcEditOptionButton);
+    enableWidget(enable,              _reqcObsFileChooser);
+    enableWidget(enable,              _reqcNavFileChooser);
+    enableWidget(enable &&  enable10, _reqcOutObsLineEdit);
+    enableWidget(enable &&  enable10, _reqcOutNavLineEdit);
+    enableWidget(enable && !enable10, _reqcOutLogLineEdit);
   }
 }
@@ -2522,21 +2522,21 @@
 }
 
-// Start Post-Processing Teqc
-////////////////////////////////////////////////////////////////////////////
-void bncWindow::startPostProcessingTeqc() {
+// Start Post-Processing Reqc
+////////////////////////////////////////////////////////////////////////////
+void bncWindow::startPostProcessingReqc() {
 #ifdef USE_POSTPROCESSING
-  _runningPostProcessingTeqc = true;
+  _runningPostProcessingReqc = true;
   enableStartStop();
-  if (_teqcActionComboBox->currentText() == "Analyze") {
-    t_teqcAnalyze* teqcAnalyze = new t_teqcAnalyze(this);
-    connect(teqcAnalyze, SIGNAL(finished()), 
-            this, SLOT(slotFinishedPostProcessingTeqc()));
-    teqcAnalyze->start();
+  if (_reqcActionComboBox->currentText() == "Analyze") {
+    t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
+    connect(reqcAnalyze, SIGNAL(finished()), 
+            this, SLOT(slotFinishedPostProcessingReqc()));
+    reqcAnalyze->start();
   }
   else {
-    t_teqcEdit* teqcEdit = new t_teqcEdit(this);
-    connect(teqcEdit, SIGNAL(finished()), 
-            this, SLOT(slotFinishedPostProcessingTeqc()));
-    teqcEdit->start();
+    t_reqcEdit* reqcEdit = new t_reqcEdit(this);
+    connect(reqcEdit, SIGNAL(finished()), 
+            this, SLOT(slotFinishedPostProcessingReqc()));
+    reqcEdit->start();
   }
 #else
@@ -2546,10 +2546,10 @@
 }
 
-// Post-Processing Teqc Finished
-////////////////////////////////////////////////////////////////////////////
-void bncWindow::slotFinishedPostProcessingTeqc() {
-  _runningPostProcessingTeqc = false;
+// Post-Processing Reqc Finished
+////////////////////////////////////////////////////////////////////////////
+void bncWindow::slotFinishedPostProcessingReqc() {
+  _runningPostProcessingReqc = false;
   QMessageBox::information(this, "Information",
-                           "Teqc-Processing Thread Finished");
+                           "Reqc-Processing Thread Finished");
   enableStartStop();
 }
@@ -2557,6 +2557,6 @@
 // Edit teqc-like editing options
 ////////////////////////////////////////////////////////////////////////////
-void bncWindow::slotTeqcEditOption() {
-  teqcDlg* dlg = new teqcDlg(this);
+void bncWindow::slotReqcEditOption() {
+  reqcDlg* dlg = new reqcDlg(this);
   dlg->move(this->pos().x()+50, this->pos().y()+50);
   dlg->exec();
@@ -2577,6 +2577,6 @@
     _actStop->setEnabled(false);
   }
-  else if ( _teqcActionComboBox && !_teqcActionComboBox->currentText().isEmpty() ) {
-    if (_runningPostProcessingTeqc) {
+  else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
+    if (_runningPostProcessingReqc) {
       _actStart->setEnabled(false);
     }