Index: /trunk/BNC/bnchelp.html =================================================================== --- /trunk/BNC/bnchelp.html (revision 383) +++ /trunk/BNC/bnchelp.html (revision 384) @@ -374,5 +374,5 @@

B - 10. No Window - optional

-You can use BNC on all systems in batch mode with the command line option '-nw'. BNC then runs in 'no window' mode, reading options from the configuration file ${HOME}/.config/BKG/BNC_NTRIP_Client.conf (Unix/Linux) or from the register BKC_NTRIP_Client (Windows). +You can use BNC on all systems in batch mode with the command line option '-nw'. BNC then runs in 'no window' mode, reading options from the configuration file ${HOME}/.config/BKG/BNC_NTRIP_Client.conf (Unix/Linux) or from the register BNC_NTRIP_Client (Windows).

@@ -436,5 +436,4 @@ NTRIP broadcaster overview  http://www.rtcm-ntrip.org/home EUREF-IP Pilot Project  http://www.epncb.oma.be/euref_IP -EUREF-IP Pilot Project  http://www.epncb.oma.be/euref_IP Radio Technical Commission
for Maritime Services  http://www.rtcm.org @@ -505,5 +504,5 @@

F - 2.1 RTCM Version 2.x

-Transmitting GNSS carrier phase data can be done through RTCM Version 2.x messages. Please note that only RTCM Version 2.3 streams may include GLONASS data. Messages that may be of interest here are of type 1, 2, 3, 6, 9, 16,18/19, 20/21, and 22. +Transmitting GNSS carrier phase data can be done through RTCM Version 2.x messages. Please note that only RTCM Version 2.2 and 2.3 streams may include GLONASS data. Messages that may be of some interest here are:

@@ -533,4 +532,10 @@ Type 19 and 21 messages are the uncorrected pseudo-range measurements and pseudo-range corrections used in RTK. +
  • +Type 23 message provides the information on the antenna type used on the reference station. +
    • +
  • +Type 24 message carries the coordinates of the installed antenna's ARP in the GNSS coordinate system coordinates. +
    • @@ -543,5 +548,5 @@