Changeset 2448 in ntrip

Timestamp:

Apr 21, 2010, 12:28:22 PM (16 years ago)

Author:

weber

Message:

* empty log message *

File:

• trunk/BNC/bnchelp.html (modified) (11 diffs)

trunk/BNC/bnchelp.html

@@ -64 +64 @@
 The first of the following figures shows a flow chart of BNC connected to a GNSS receiver via serial or TCP communication link for the pupose of Precise Point Positioning. The second figure shows the conversion of RTCM streams to RINEX batches. The third figure shows a flow chart of BNC feeding a real-time GNSS engine. The engine then estimates satellite orbit and clock correctors. The 'BKG Ntrip Server' (BNS) is used in this scenario to encode correctors to RTCMv3.
 </p>
-<p><img src="IMG/screenshot10.png"/></p>
+<p><img src=":/bnchelp/screenshot10.png"/></p>
 <p><u>Figure:</u> BNC connected to a GNSS receiver for Precise Point Positioning.</p>
 
 <p>
 </p>
-<p><img src="IMG/screenshot01.png"/></p>
+<p><img src=":/bnchelp/screenshot01.png"/></p>
 <p><u>Figure:</u> BNC converting RTCM streams to RINEX batches.</p>
 
 <p>
 </p>
-<p><img src="IMG/screenshot02.png"/></p>
+<p><img src=":/bnchelp/screenshot02.png"/></p>
 <p><u>Figuge:</u> BNC feeding a real-time GNSS engine.</p>
 
@@ -96 +96 @@
 This section describes BNC's top menu bar, its processing options, the 'Streams' and 'Log' sections, and the bottom menu bar, see figure below.
 </p>
-<p><img src="IMG/screenshot09.png"/></p>
+<p><img src=":/bnchelp/screenshot09.png"/></p>
 <p><u>Figure:</u> Sections on BNC's main window.</p>
 
@@ -732 +732 @@
 The following figure shows the screenshot of a BNC configuration where a number if streams is pulled from different NTRIP broadcasters to feed a GNSS engine via IP port output.
 </p>
-<p><img src="IMG/screenshot12.png"/></p>
+<p><img src=":/bnchelp/screenshot12.png"/></p>
 <p><u>Figure:</u> Synchronized BNC output via IP port to feed a GNSS real-time engine.</p>
 
@@ -772 +772 @@
 </p>
 </p>
-<p><img src="IMG/screenshot11.png"/></p>
+<p><img src=":/bnchelp/screenshot11.png"/></p>
 <p><u>Figure:</u> BNC pulling a VRS to feed a serial connected rover.</p>
 
@@ -987 +987 @@
 The following figure provides the screenshot of an example PPP session with BNC.
 </p>
-<p><img src="IMG/screenshot03.png"/></p>
+<p><img src=":/bnchelp/screenshot03.png"/></p>
 <p><u>Figure:</u> Precise Point Positioning (PPP) with BNC.</p>
 
@@ -1186 +1186 @@
 <p>
 </p>
-<p><img src="IMG/screenshot08.png"/></p>
+<p><img src=":/bnchelp/screenshot08.png"/></p>
 <p><u>Figure:</u> Bandwidth consumption of incoming streams.</p>
 
@@ -1196 +1196 @@
 <p>
 </p>
-<p><img src="IMG/screenshot07.png"/></p>
+<p><img src=":/bnchelp/screenshot07.png"/></p>
 <p><u>Figure:</u> Latency of incoming streams.</p>
 
@@ -1206 +1206 @@
 <p>
 </p>
-<p><img src="IMG/screenshot13.png"/></p>
+<p><img src=":/bnchelp/screenshot13.png"/></p>
 <p><u>Figure:</u> Time series plot of PPP session.</p>
 
@@ -1219 +1219 @@
 Button 'Add Stream' opens a window that allows user to select one of several input communication links, see figure below.
 </p>
-<p><img src="IMG/screenshot06.png"/></p>
+<p><img src=":/bnchelp/screenshot06.png"/></p>
 <p><u>Figure:</u> Steam input communication links.</p>
 
@@ -1236 +1236 @@
 </p> 
 </p>
-<p><img src="IMG/screenshot04.png"/></p>
+<p><img src=":/bnchelp/screenshot04.png"/></p>
 <p><u>Figure:</u> Casters table.</p>
 
@@ -1256 +1256 @@
 </p> 
 </p>
-<p><img src="IMG/screenshot05.png"/></p>
+<p><img src=":/bnchelp/screenshot05.png"/></p>
 <p><u>Figure:</u> Broadcaster source-table.</p>