Changeset 11173 in ntrip for trunk/BNC/src

Timestamp:

Nov 6, 2026, 11:07:32 AM (25 hours ago)

Author:

stuerze

Message:

example configs description updated

File:

• trunk/BNC/src/bnchelp.html (modified) (31 diffs)

trunk/BNC/src/bnchelp.html

@@ -2054 +2054 @@
 
   <ol type="1">
-    <li> Configuration File 'RinexObs.bnc'<br>
+    <li>Configuration File '01_RinexObs.bnc'<br>
       Purpose: Convert RTCM streams to RINEX Observation files.
       The configuration pulls RTCM Version 3 streams from Ntrip Broadcasters using
@@ -2062 +2062 @@
     </li>
 
-    <li>Configuration File 'RinexEph.bnc'<br>
+    <li>Configuration File '02_RinexEph.bnc'<br>
       Purpose: Convert a RTCM stream with navigation messages to RINEX Navigation
       files. The configuration pulls a RTCM Version 3 stream with Broadcast Ephemeris
@@ -2071 +2071 @@
     </li>
 
-    <li>Configuration File 'BrdcCorr.bnc'<br>
+    <li>Configuration File '03_BrdcCorr.bnc'<br>
       Purpose: Save Broadcast Corrections from RTCM SSR messages in hourly plain
       ASCII files. See <a href="https://igs.bkg.bund.de/ntrip/#rtcm-corr"
@@ -2078 +2078 @@
     </li>
 
-    <li>Configuration File 'RinexConcat.bnc'<br>
+    <li>Configuration File '04_RinexConcat.bnc'<br>
       Purpose: Concatenate several RINEX Version 3 files to produce one compiled file
       and edit the marker name in the file header. The sampling interval is set to 30
@@ -2086 +2086 @@
     </li>
 
-    <li>Configuration File 'RinexQC.bnc'<br>
+    <li>Configuration File '05_RinexQC.bnc'<br>
       Purpose: Check the quality of a RINEX Version 4 file by means of a multipath
       analysis. Results are saved on disk in terms of a plot in PNG format. See
@@ -2094 +2094 @@
     </li>
 
-    <li>Configuration File 'RTK.bnc'<br>
+    <li>Configuration File '06_RTK.bnc'<br>
       Purpose: Feed a serial connected receiver with observations from a nearby
       reference station for conventional RTK. The stream is scanned for RTCM
@@ -2101 +2101 @@
     </li>
 
-    <li>Configuration File 'FeedEngine.bnc'<br>
+    <li>Configuration File '07_FeedEngine.bnc'<br>
       Purpose: Feed a real-time GNSS engine with observations from remote reference
       stations. The configuration pulls a single stream from an Ntrip Broadcaster.
@@ -2110 +2110 @@
     </li>
 
-    <li>Configuration File 'PPP.bnc'<br>
+    <li>Configuration File '08_PPP.bnc'<br>
       Purpose: Precise Point Positioning from observations of a rover receiver. The
       configuration reads RTCM Version 3 observations, a Broadcast Ephemeris stream
@@ -2117 +2117 @@
     </li>
 
-    <li>Configuration File 'PPPNet.bnc'<br>
+    <li>Configuration File '09_PPPNet.bnc'<br>
       Purpose: Precise Point Positioning for several rovers or receivers from an
       entire network of reference stations in one BNC job. The possible maximum
@@ -2126 +2126 @@
     </li>
 
-    <li>Configuration File 'PPPQuickStart.bnc'<br>
+    <li>Configuration File '10_PPPQuickStart.bnc'<br>
       Purpose: Precise Point Positioning in Quick-Start mode from observations of a
       static receiver with precisely known position. The configuration reads RTCM
@@ -2135 +2135 @@
     </li>
 
-    <li>Configuration File 'PPPPostProc.bnc'<br>
+    <li>Configuration File '11_PPPPostProc.bnc'<br>
       Purpose: Precise Point Positioning in post processing mode. BNC reads RINEX
       Version 3 Observation and Navigation files and a Broadcast Correction file.
@@ -2145 +2145 @@
     </li>
 
-    <li>Configuration File 'PPPOsm.bnc'<br>
+    <li>Configuration File '12_PPPOsm.bnc'<br>
       Purpose: Track BNC's point positioning solutions using OpenStreetMap as background.
       BNC reads a RINEX Observation file and a RINEX Navigation file to carry out
@@ -2155 +2155 @@
     </li>
 
-    <li>Configuration File 'PPPGalHAS.bnc'<br>
+    <li>Configuration File '13_PPPGalHAS.bnc'<br>
       Purpose: Precise Point Positioning in Quick-Start mode with SSR corrections
       from the Galileo HAS Internet Data Distribution (IDD) interface with observations
@@ -2171 +2171 @@
     </li>
 
-    <li>Configuration File 'SaveSp3.bnc'<br>
+    <li>Configuration File '14_SaveSp3.bnc'<br>
       Purpose: Produces SP3 files from a Broadcast Ephemeris stream and a Broadcast
       Correction stream. The Broadcast Correction stream is formally introduced in
@@ -2178 +2178 @@
     </li>
 
-    <li>Configuration File 'Sp3ETRF2000PPP.bnc'<br>
+    <li>Configuration File '15_Sp3ETRF2000PPP.bnc'<br>
       Purpose: Produce SP3 files from a Broadcast Ephemeris stream and a stream
       carrying ETRF2000 Broadcast Corrections. The Broadcast Correction stream is
@@ -2188 +2188 @@
     </li>
 
-    <li>Configuration File 'Upload.bnc'<br>
+    <li>Configuration File '16_Upload.bnc'<br>
       Purpose: Upload orbits and clocks from a real-time GNSS engine to an Ntrip
       Broadcaster. For that the configuration reads precise orbits and clocks in
@@ -2199 +2199 @@
     </li>
 
-    <li>Configuration File 'Combi.bnc'<br>
+    <li>Configuration File '17_Combi.bnc'<br>
       Purpose: Pull 2 streams carrying Broadcast Corrections, and Satellite Code Biases
       together with Broadcast Ephemeris from an Ntrip Broadcaster
@@ -2210 +2210 @@
     </li>
 
-    <li>Configuration File 'CombiPPP.bnc'<br>
+    <li>Configuration File '18_CombiPPP.bnc'<br>
       Purpose: This configuration equals the 'Combi.bnc' configuration. However, the
       combined Broadcast Corrections are in addition used for an 'INTERNAL' PPP
@@ -2218 +2218 @@
     </li>
 
-    <li>Configuration File 'UploadEph.bnc'<br>
+    <li>Configuration File '19_UploadEph.bnc'<br>
       Purpose: Pull a number of streams from reference stations to get the
       contained Broadcast Ephemeris messages. They are encoded to RTCM Version 3
@@ -2225 +2225 @@
     </li>
 
-    <li>Configuration File 'UploadRaw.bnc'<br>
+    <li>Configuration File '20_UploadRaw.bnc'<br>
       Purpose: Forward the stream contents of the incoming stream BCEP00BKG0
       from products.igs-ip.net to another caster.
     </li>
 
-    <li>Configuration File 'CompareSp3.bnc'<br>
+    <li>Configuration File '21_CompareSp3.bnc'<br>
       Purpose: Compare two SP3 files to calculate RMS values for orbit and clock
       differences. GPS satellite G05 and GLONASS satellite R18 are excluded from this
@@ -2236 +2236 @@
     </li>
 
-    <li>Configuration File 'Empty.bnc'<br>
+    <li>Configuration File '22_Empty.bnc'<br>
       Purpose: Provide an empty example configuration file for BNC which only
       contains the default settings.
     </li>
-
-    <li value="29"> Configuration File '29_PPPAR_CNES.bnc'<br>
+</ol>
+  <ol start="29">
+    <li> Configuration File '29_PPPAR_CNES.bnc'<br>
       Purpose: Precise Point Positioning with ambiguity resolution using an raw input file.
       Call: bnc --conf 29_PPPAR_CNES.bnc --file WTZR_CNES_20251117.raw
@@ -2248 +2249 @@
       More detailed PPP results are saved in the PPP logfile.
 
-    <li value="30"> Configuration File '30_PPPAR_WHU.bnc'<br>
+    <li> Configuration File '30_PPPAR_WHU.bnc'<br>
       Purpose: Precise Point Positioning with ambiguity resolution using an raw input file.
       Call: bnc --conf 30_PPPAR_WHU.bnc --file WTZR_WHU_20251129.raw
@@ -2256 +2257 @@
     </li>
 
-    <li value="31"> Configuration File '31_SsrQC.bnc'<br>
+    <li> Configuration File '31_SsrQC.bnc'<br>
       Purpose: Quality control of Broadcast Correction streams (see section 'QC Logfile, QC Interval').
       The configuration reads a Broadcast Ephemeris stream and three Broadcast Correction streams in
@@ -2264 +2265 @@
       bnc --conf 31_SsrQC.bnc --file &lt;rawFile&gt; --key ssrQcIntr "5 min"
     </li>
-
   </ol>
   <b>(B) Working with Command Line configuration options</b><br><br>
@@ -2274 +2274 @@
 
   <ol start="23">
-    <li>Shell Script 'RinexQC.sh'<br>
+    <li>Shell Script '23_RinexQC.sh'<br>
       Purpose: Equals configuration file example 'RinexQC.bnc', checks the quality of
       a RINEX Version 4 file by means of a multipath analysis. The platform offscreen
@@ -2281 +2281 @@
     </li>
 
-    <li>Shell Script 'RinexConcat.sh'<br>
+    <li>Shell Script '24_RinexConcat.sh'<br>
       Purpose: Equals configuration file example 'RinexConcat.bnc', concatenates
       several RINEX Version 3 files to produce one compiled file and edit the marker
@@ -2288 +2288 @@
     </li>
 
-    <li>Shell Script 'RinexEph.sh'<br>
+    <li>Shell Script '25_RinexEph.sh'<br>
       Purpose: Equals configuration file example 'RinexEph.bnc', converts a RTCM
       stream with navigation messages to RINEX Navigation files. The configuration
@@ -2298 +2298 @@
     </li>
 
-    <li>Shell Script 'ScanLate.sh'<br>
+    <li>Shell Script '26_ScanLate.sh'<br>
       Purpose: Scan an observation stream for contained RTCM message types, print
       observation latencies. The output is saved in a logfile. Latencies are
@@ -2305 +2305 @@
     </li>
 
-    <li>Shell Script 'RinexObs.sh'<br>
+    <li>Shell Script '27_RinexObs.sh'<br>
       Purpose: Equals configuration file example 'RinexObs.bnc', converts RTCM
       streams to RINEX Observation files. The configuration pulls streams from two
@@ -2323 +2323 @@
 
   <ol start="28">
-    <li>Shell Script 'CompareSp3.sh'<br>
+    <li>Shell Script '28_CompareSp3.sh'<br>
       Purpose: Equals configuration file example 'CompareSp3.bnc', compares two SP3
       files to calculate RMS values for orbit and clock differences. However, instead
@@ -2332 +2332 @@
     </li>
   </ol>
-  </p>
+</p>
 
   <p>