source: ntrip/trunk/BNC/src/bncwindow.cpp@ 8203

Last change on this file since 8203 was 8171, checked in by stuerze, 7 years ago

minor changes

File size: 158.0 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <QAction>
44#include <QApplication>
45#include <QCheckBox>
46#include <QComboBox>
47#include <QDialog>
48#include <QFontDialog>
49#include <QGridLayout>
50#include <QHeaderView>
51#include <QLabel>
52#include <QLineEdit>
53#include <QMenu>
54#include <QMenuBar>
55#include <QMessageBox>
56#include <QPushButton>
57#include <QRadioButton>
58#include <QSpinBox>
59#include <QTableWidgetItem>
60#include <QTextEdit>
61#include <QToolBar>
62
63#include <unistd.h>
64#include "bncwindow.h"
65#include "bnccore.h"
66#include "bncgetthread.h"
67#include "bnctabledlg.h"
68#include "bncipport.h"
69#include "bncudpport.h"
70#include "bncserialport.h"
71#include "bnchlpdlg.h"
72#include "bnchtml.h"
73#include "bnctableitem.h"
74#include "bncsettings.h"
75#include "bncfigure.h"
76#include "bncfigurelate.h"
77#include "bncfigureppp.h"
78#include "bncversion.h"
79#include "bncbytescounter.h"
80#include "bncsslconfig.h"
81#include "upload/bnccustomtrafo.h"
82#include "upload/bncephuploadcaster.h"
83#include "qtfilechooser.h"
84#include "reqcdlg.h"
85#include "bncmap.h"
86#include "rinex/reqcedit.h"
87#include "rinex/reqcanalyze.h"
88#include "orbComp/sp3Comp.h"
89#ifdef QT_WEBKIT
90# include "map/bncmapwin.h"
91#endif
92
93using namespace std;
94
95#ifdef GNSSCENTER_PLUGIN
96Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
97#endif
98
99// Constructor
100////////////////////////////////////////////////////////////////////////////
101bncWindow::bncWindow() {
102
103 const static QPalette paletteWhite(QColor(255, 255, 255));
104 const static QPalette paletteGray(QColor(230, 230, 230));
105
106#ifdef GNSSCENTER_PLUGIN
107 BNC_CORE->setConfFileName("");
108#endif
109
110 _caster = 0;
111 _casterEph = 0;
112
113 _bncFigure = new bncFigure(this);
114 _bncFigureLate = new bncFigureLate(this);
115 _bncFigurePPP = new bncFigurePPP(this);
116
117 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
118 _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
119
120 connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
121 connect(BNC_CORE, SIGNAL(finishedRnxPPP()), this, SLOT(slotPostProcessingFinished()));
122
123 _runningRealTime = false;
124 _runningPPP = false;
125 _runningEdit = false;
126 _runningQC = false;
127 _runningSp3Comp = false;
128 _reqcActionComboBox = 0; // necessary for enableStartStop()
129
130 _mapWin = 0;
131
132 int ww = QFontMetrics(this->font()).width('w');
133
134 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
135
136 setMinimumSize(100*ww, 70*ww);
137
138 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
139
140 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
141 this, SLOT(slotWindowMessage(QByteArray,bool)));
142
143 // Create Actions
144 // --------------
145 _actHelp = new QAction(tr("&Help Contents"),this);
146 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
147
148 _actAbout = new QAction(tr("&About BNC"),this);
149 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
150
151 _actFlowchart = new QAction(tr("&Flow Chart"),this);
152 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
153
154 _actFontSel = new QAction(tr("Select &Font"),this);
155 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
156
157 _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
158 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
159
160 _actQuit = new QAction(tr("&Quit"),this);
161 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
162
163 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
164 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
165
166 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
167 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
168 _actDeleteMountPoints->setEnabled(false);
169
170 _actMapMountPoints = new QAction(tr("&Map"),this);
171 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
172
173 _actStart = new QAction(tr("Sta&rt"),this);
174 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
175
176 _actStop = new QAction(tr("Sto&p"),this);
177 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
178
179 _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
180 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
181
182 CreateMenu();
183 AddToolbar();
184
185 bncSettings settings;
186
187 // Network Options
188 // ---------------
189 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
190 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
191
192 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
193 this, SLOT(slotBncTextChanged()));
194
195 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
196 _sslIgnoreErrorsCheckBox = new QCheckBox();
197 _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
198 settings.value("sslIgnoreErrors").toInt()));
199
200 // General Options
201 // ---------------
202 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
203 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
204 _rnxAppendCheckBox = new QCheckBox();
205 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
206 settings.value("rnxAppend").toInt()));
207 _onTheFlyComboBox = new QComboBox();
208 _onTheFlyComboBox->setEditable(false);
209 _onTheFlyComboBox->addItems(QString("no,1 day,1 hour,5 min,1 min").split(","));
210 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
211 if (ii != -1) {
212 _onTheFlyComboBox->setCurrentIndex(ii);
213 }
214 _autoStartCheckBox = new QCheckBox();
215 _autoStartCheckBox->setCheckState(Qt::CheckState(
216 settings.value("autoStart").toInt()));
217
218 // RINEX Observations Options
219 // --------------------------
220 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
221 _rnxIntrComboBox = new QComboBox();
222 _rnxIntrComboBox->setEditable(false);
223 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
224 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
225 if (ii != -1) {
226 _rnxIntrComboBox->setCurrentIndex(ii);
227 }
228 _rnxSamplSpinBox = new QSpinBox();
229 _rnxSamplSpinBox->setMinimum(0);
230 _rnxSamplSpinBox->setMaximum(60);
231 _rnxSamplSpinBox->setSingleStep(5);
232 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
233 _rnxFileCheckBox = new QCheckBox();
234 _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
235 _rnxSamplSpinBox->setSuffix(" sec");
236 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
237 _rnxSkelLineEdit->setMaximumWidth(5*ww);
238 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
239 _rnxV3CheckBox = new QCheckBox();
240 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
241 _rnxV3filenameCheckBox = new QCheckBox();
242 _rnxV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3filenames").toInt()));
243 QString hlp = settings.value("rnxV2Priority").toString();
244 if (hlp.isEmpty()) {
245 hlp = "G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_";
246 }
247 _rnxV2Priority = new QLineEdit(hlp);
248
249 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
250 this, SLOT(slotBncTextChanged()));
251 connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
252 this, SLOT(slotBncTextChanged()));
253
254 // RINEX Ephemeris Options
255 // -----------------------
256 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
257 _ephIntrComboBox = new QComboBox();
258 _ephIntrComboBox->setEditable(false);
259 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
260 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
261 if (jj != -1) {
262 _ephIntrComboBox->setCurrentIndex(jj);
263 }
264 _ephOutPortLineEdit = new QLineEdit(settings.value("ephOutPort").toString());
265 _ephV3CheckBox = new QCheckBox();
266 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
267
268 _ephV3filenameCheckBox = new QCheckBox();
269 _ephV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("ephV3filenames").toInt()));
270
271 connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
272 this, SLOT(slotBncTextChanged()));
273
274 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
275 this, SLOT(slotBncTextChanged()));
276
277 // Broadcast Corrections Options
278 // -----------------------------
279 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
280 _corrIntrComboBox = new QComboBox();
281 _corrIntrComboBox->setEditable(false);
282 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
283 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
284 if (mm != -1) {
285 _corrIntrComboBox->setCurrentIndex(mm);
286 }
287 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
288
289 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
290 this, SLOT(slotBncTextChanged()));
291
292 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
293 this, SLOT(slotBncTextChanged()));
294
295 // Feed Engine Options
296 // -------------------
297 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
298 _outWaitSpinBox = new QSpinBox();
299 _outWaitSpinBox->setMinimum(1);
300 _outWaitSpinBox->setMaximum(30);
301 _outWaitSpinBox->setSingleStep(1);
302 _outWaitSpinBox->setSuffix(" sec");
303 _outWaitSpinBox->setValue(settings.value("outWait").toInt());
304 _outSamplSpinBox = new QSpinBox();
305 _outSamplSpinBox->setMinimum(0);
306 _outSamplSpinBox->setMaximum(60);
307 _outSamplSpinBox->setSingleStep(5);
308 _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
309 _outSamplSpinBox->setSuffix(" sec");
310 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
311 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
312
313 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
314 this, SLOT(slotBncTextChanged()));
315
316 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
317 this, SLOT(slotBncTextChanged()));
318
319 // Serial Output Options
320 // ---------------------
321 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
322 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
323 _serialBaudRateComboBox = new QComboBox();
324 _serialBaudRateComboBox->addItems(QString("110,300,600,"
325 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
326 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
327 if (kk != -1) {
328 _serialBaudRateComboBox->setCurrentIndex(kk);
329 }
330 _serialFlowControlComboBox = new QComboBox();
331 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
332 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
333 if (kk != -1) {
334 _serialFlowControlComboBox->setCurrentIndex(kk);
335 }
336 _serialDataBitsComboBox = new QComboBox();
337 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
338 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
339 if (kk != -1) {
340 _serialDataBitsComboBox->setCurrentIndex(kk);
341 }
342 _serialParityComboBox = new QComboBox();
343 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
344 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
345 if (kk != -1) {
346 _serialParityComboBox->setCurrentIndex(kk);
347 }
348 _serialStopBitsComboBox = new QComboBox();
349 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
350 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
351 if (kk != -1) {
352 _serialStopBitsComboBox->setCurrentIndex(kk);
353 }
354 _serialAutoNMEAComboBox = new QComboBox();
355 _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
356 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
357 if (kk != -1) {
358 _serialAutoNMEAComboBox->setCurrentIndex(kk);
359 }
360 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
361 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
362
363 _serialManualNMEASamplingSpinBox = new QSpinBox();
364 _serialManualNMEASamplingSpinBox->setMinimum(0);
365 _serialManualNMEASamplingSpinBox->setMaximum(300);
366 _serialManualNMEASamplingSpinBox->setSingleStep(10);
367 _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
368 _serialManualNMEASamplingSpinBox->setSuffix(" sec");
369
370 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
371 this, SLOT(slotBncTextChanged()));
372
373 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
374 this, SLOT(slotBncTextChanged()));
375
376 // Outages Options
377 // ---------------
378 _adviseObsRateComboBox = new QComboBox();
379 _adviseObsRateComboBox->setEditable(false);
380 _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
381 kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
382 if (kk != -1) {
383 _adviseObsRateComboBox->setCurrentIndex(kk);
384 }
385 _adviseFailSpinBox = new QSpinBox();
386 _adviseFailSpinBox->setMinimum(0);
387 _adviseFailSpinBox->setMaximum(60);
388 _adviseFailSpinBox->setSingleStep(1);
389 _adviseFailSpinBox->setSuffix(" min");
390 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
391 _adviseRecoSpinBox = new QSpinBox();
392 _adviseRecoSpinBox->setMinimum(0);
393 _adviseRecoSpinBox->setMaximum(60);
394 _adviseRecoSpinBox->setSingleStep(1);
395 _adviseRecoSpinBox->setSuffix(" min");
396 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
397 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
398
399 connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
400 this, SLOT(slotBncTextChanged()));
401
402 // Miscellaneous Options
403 // ---------------------
404 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
405 _miscPortLineEdit = new QLineEdit(settings.value("miscPort").toString());
406 _miscIntrComboBox = new QComboBox();
407 _miscIntrComboBox->setEditable(false);
408 _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
409 int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
410 if (ll != -1) {
411 _miscIntrComboBox->setCurrentIndex(ll);
412 }
413 _miscScanRTCMCheckBox = new QCheckBox();
414 _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
415 settings.value("miscScanRTCM").toInt()));
416
417 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
418 this, SLOT(slotBncTextChanged()));
419
420 // Streams
421 // -------
422 _mountPointsTable = new QTableWidget(0,9);
423
424 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
425 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
426 _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
427 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
428 _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
429 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
430 _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
431#if QT_VERSION < 0x050000
432 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
433#else
434 _mountPointsTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
435#endif
436 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
437 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
438 _mountPointsTable->setHorizontalHeaderLabels(labels);
439 _mountPointsTable->setGridStyle(Qt::NoPen);
440 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
441 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
442 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
443 _mountPointsTable->hideColumn(0);
444 _mountPointsTable->hideColumn(3);
445 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
446 SLOT(slotSelectionChanged()));
447 populateMountPointsTable();
448
449 _log = new QTextEdit();
450 _log->setReadOnly(true);
451 QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
452 _log->setFont(msFont);
453 _log->document()->setMaximumBlockCount(1000);
454
455 // Combine Corrections
456 // -------------------
457 _cmbTable = new QTableWidget(0,3);
458 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
459 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
460 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
461 _cmbTable->setMaximumWidth(30*ww);
462 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
463 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
464 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
465#if QT_VERSION < 0x050000
466 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
467#else
468 _cmbTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
469#endif
470 _cmbTable->horizontalHeader()->setStretchLastSection(true);
471 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
472
473 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
474 _cmbUseGlonass = new QCheckBox();
475 _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
476
477 _cmbSamplSpinBox = new QSpinBox;
478 _cmbSamplSpinBox->setMinimum(10);
479 _cmbSamplSpinBox->setMaximum(60);
480 _cmbSamplSpinBox->setSingleStep(10);
481 _cmbSamplSpinBox->setMaximumWidth(9*ww);
482 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
483 _cmbSamplSpinBox->setSuffix(" sec");
484
485 QPushButton* addCmbRowButton = new QPushButton("Add Row");
486 QPushButton* delCmbRowButton = new QPushButton("Delete");
487
488 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
489 SLOT(slotBncTextChanged()));
490
491 _cmbMethodComboBox = new QComboBox();
492 _cmbMethodComboBox->setEditable(false);
493 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
494 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
495 if (im != -1) {
496 _cmbMethodComboBox->setCurrentIndex(im);
497 }
498
499 int iRow = _cmbTable->rowCount();
500 if (iRow > 0) {
501 enableWidget(true, _cmbMethodComboBox);
502 enableWidget(true, _cmbMaxresLineEdit);
503 enableWidget(true, _cmbSamplSpinBox);
504 enableWidget(true, _cmbUseGlonass);
505 }
506 else {
507 enableWidget(false, _cmbMethodComboBox);
508 enableWidget(false, _cmbMaxresLineEdit);
509 enableWidget(false, _cmbSamplSpinBox);
510 enableWidget(false, _cmbUseGlonass);
511 }
512
513 // Upload Results
514 // -------------
515 _uploadTable = new QTableWidget(0,12);
516 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
517 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
518 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
519 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
520 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
521 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
522 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
523 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
524 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
525 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
526 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
527 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
528 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
529 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
530 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
531#if QT_VERSION < 0x050000
532 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
533#else
534 _uploadTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
535#endif
536 _uploadTable->horizontalHeader()->setStretchLastSection(true);
537 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
538
539 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
540 SLOT(slotBncTextChanged()));
541
542 QPushButton* addUploadRowButton = new QPushButton("Add Row");
543 QPushButton* delUploadRowButton = new QPushButton("Del Row");
544 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
545 _uploadIntrComboBox = new QComboBox;
546 _uploadIntrComboBox->setEditable(false);
547 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
548 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
549 if (ii != -1) {
550 _uploadIntrComboBox->setCurrentIndex(ii);
551 }
552
553 _uploadAntexFile = new qtFileChooser(0, qtFileChooser::File);
554 _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
555
556 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
557 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
558 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
559 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
560 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
561 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
562 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
563
564 _uploadSamplSp3SpinBox = new QSpinBox;
565 _uploadSamplSp3SpinBox->setMinimum(0);
566 _uploadSamplSp3SpinBox->setMaximum(15);
567 _uploadSamplSp3SpinBox->setSingleStep(1);
568 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
569 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
570 _uploadSamplSp3SpinBox->setSuffix(" min");
571
572 _uploadSamplClkRnxSpinBox = new QSpinBox;
573 _uploadSamplClkRnxSpinBox->setMinimum(0);
574 _uploadSamplClkRnxSpinBox->setMaximum(60);
575 _uploadSamplClkRnxSpinBox->setSingleStep(5);
576 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
577 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
578 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
579
580 int iRowT = _uploadTable->rowCount();
581 if (iRowT > 0) {
582 enableWidget(true, _uploadIntrComboBox);
583 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
584 enableWidget(true, _uploadSamplSp3SpinBox);
585 enableWidget(true, _uploadSamplClkRnxSpinBox);
586 enableWidget(true, _uploadAntexFile);
587 }
588 else {
589 enableWidget(false, _uploadIntrComboBox);
590 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
591 enableWidget(false, _uploadSamplSp3SpinBox);
592 enableWidget(false, _uploadSamplClkRnxSpinBox);
593 enableWidget(false, _uploadAntexFile);
594 }
595
596 // Upload RTCM3 Ephemeris
597 // ----------------------
598 _uploadEphTable = new QTableWidget(0,6);
599 _uploadEphTable->setColumnCount(6);
600 _uploadEphTable->setRowCount(0);
601 _uploadEphTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, bytes").split(","));
602 _uploadEphTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
603 _uploadEphTable->setSelectionBehavior(QAbstractItemView::SelectRows);
604 _uploadEphTable->horizontalHeader()->resizeSection( 0,13*ww);
605 _uploadEphTable->horizontalHeader()->resizeSection( 1, 5*ww);
606 _uploadEphTable->horizontalHeader()->resizeSection( 2, 8*ww);
607 _uploadEphTable->horizontalHeader()->resizeSection( 3, 8*ww);
608 _uploadEphTable->horizontalHeader()->resizeSection( 4,10*ww);
609 _uploadEphTable->horizontalHeader()->resizeSection( 5,12*ww);
610#if QT_VERSION < 0x050000
611 _uploadEphTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
612#else
613 _uploadEphTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
614#endif
615 _uploadEphTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
616
617 connect(_uploadEphTable, SIGNAL(itemSelectionChanged()),
618 SLOT(slotBncTextChanged()));
619
620 QPushButton* addUploadEphRowButton = new QPushButton("Add Row");
621 addUploadEphRowButton->setMaximumWidth(9*ww);
622 QPushButton* delUploadEphRowButton = new QPushButton("Del Row");
623 delUploadEphRowButton->setMaximumWidth(9*ww);
624
625 _uploadSamplRtcmEphSpinBox = new QSpinBox;
626 _uploadSamplRtcmEphSpinBox->setMinimum(0);
627 _uploadSamplRtcmEphSpinBox->setMaximum(60);
628 _uploadSamplRtcmEphSpinBox->setSingleStep(5);
629 _uploadSamplRtcmEphSpinBox->setMaximumWidth(9*ww);
630 _uploadSamplRtcmEphSpinBox->setValue(settings.value("uploadSamplRtcmEph").toInt());
631 _uploadSamplRtcmEphSpinBox->setSuffix(" sec");
632
633 iRowT = _uploadEphTable->rowCount();
634 if (iRowT > 0) {
635 enableWidget(true, _uploadSamplRtcmEphSpinBox);
636 }
637 else {
638 enableWidget(false, _uploadSamplRtcmEphSpinBox);
639 }
640
641 // Canvas with Editable Fields
642 // ---------------------------
643 _canvas = new QWidget;
644 setCentralWidget(_canvas);
645
646 _aogroup = new QTabWidget();
647 _aogroup->setElideMode(Qt::ElideNone);
648 _aogroup->setUsesScrollButtons(true);
649 QWidget* pgroup = new QWidget();
650 QWidget* ggroup = new QWidget();
651 QWidget* sgroup = new QWidget();
652 QWidget* egroup = new QWidget();
653 QWidget* agroup = new QWidget();
654 QWidget* cgroup = new QWidget();
655 QWidget* ogroup = new QWidget();
656 QWidget* rgroup = new QWidget();
657 QWidget* sergroup = new QWidget();
658 QWidget* pppGroup1 = new QWidget();
659 QWidget* pppGroup2 = new QWidget();
660 QWidget* pppGroup3 = new QWidget();
661 QWidget* pppGroup4 = new QWidget();
662 QWidget* reqcgroup = new QWidget();
663 QWidget* sp3CompGroup = new QWidget();
664 QWidget* cmbgroup = new QWidget();
665 QWidget* uploadgroup = new QWidget();
666 QWidget* uploadEphgroup = new QWidget();
667 _aogroup->addTab(pgroup,tr("Network"));
668 _aogroup->addTab(ggroup,tr("General"));
669 _aogroup->addTab(ogroup,tr("RINEX Observations"));
670 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
671 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
672 _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
673 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
674 _aogroup->addTab(sgroup,tr("Feed Engine"));
675 _aogroup->addTab(sergroup,tr("Serial Output"));
676 _aogroup->addTab(agroup,tr("Outages"));
677 _aogroup->addTab(rgroup,tr("Miscellaneous"));
678 _aogroup->addTab(pppGroup1,tr("PPP (1)"));
679 _aogroup->addTab(pppGroup2,tr("PPP (2)"));
680 _aogroup->addTab(pppGroup3,tr("PPP (3)"));
681 _aogroup->addTab(pppGroup4,tr("PPP (4)"));
682 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
683 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
684 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
685
686 // Log Tab
687 // -------
688 _loggroup = new QTabWidget();
689 _loggroup->addTab(_log,tr("Log"));
690 _loggroup->addTab(_bncFigure,tr("Throughput"));
691 _loggroup->addTab(_bncFigureLate,tr("Latency"));
692 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
693
694 // Netowork (Proxy and SSL) Tab
695 // ----------------------------
696 QGridLayout* pLayout = new QGridLayout;
697 pLayout->setColumnMinimumWidth(0,13*ww);
698 _proxyPortLineEdit->setMaximumWidth(9*ww);
699
700 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
701 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
702 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
703 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
704 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
705 pLayout->addWidget(new QLabel("Path to SSL certificates"), 3, 0);
706 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
707 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
708 pLayout->addWidget(new QLabel("Ignore SSL authorization errors"), 4, 0);
709 pLayout->addWidget(_sslIgnoreErrorsCheckBox, 4, 1, 1,10);
710 pLayout->addWidget(new QLabel(""), 5, 1);
711 pLayout->setRowStretch(6, 999);
712
713 pgroup->setLayout(pLayout);
714
715 // General Tab
716 // -----------
717 QGridLayout* gLayout = new QGridLayout;
718 gLayout->setColumnMinimumWidth(0,14*ww);
719 _onTheFlyComboBox->setMaximumWidth(9*ww);
720
721 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
722 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
723 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,20);
724 gLayout->addWidget(new QLabel("Append files"), 2, 0);
725 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
726 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
727 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
728 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
729 gLayout->addWidget(_autoStartCheckBox, 4, 1);
730 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
731 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,20);
732 gLayout->addWidget(new QLabel(""), 6, 1);
733 gLayout->setRowStretch(7, 999);
734
735 ggroup->setLayout(gLayout);
736
737 // RINEX Observations
738 // ------------------
739 QGridLayout* oLayout = new QGridLayout;
740 oLayout->setColumnMinimumWidth(0,14*ww);
741 _rnxIntrComboBox->setMaximumWidth(9*ww);
742 _rnxSamplSpinBox->setMaximumWidth(9*ww);
743
744 oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
745 oLayout->addWidget(new QLabel("Directory"), 1, 0);
746 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1, 15);
747 oLayout->addWidget(new QLabel("Interval"), 2, 0);
748 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
749 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
750 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
751 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
752 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, Qt::AlignLeft);
753 oLayout->addWidget(new QLabel("Skeleton mandatory"), 3, 2);
754 oLayout->addWidget(_rnxFileCheckBox, 3, 3);
755 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
756 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1, 15);
757 oLayout->addWidget(new QLabel("Version 2 signal priority"), 5, 0);
758 oLayout->addWidget(_rnxV2Priority, 5, 1, 1, 15);
759 oLayout->addWidget(new QLabel("Version 3"), 6, 0);
760 oLayout->addWidget(_rnxV3CheckBox, 6, 1);
761 oLayout->addWidget(new QLabel("Version 3 filenames"), 6, 2);
762 oLayout->addWidget(_rnxV3filenameCheckBox, 6, 3);
763 oLayout->addWidget(new QLabel(""), 7, 1);
764 oLayout->setRowStretch(8, 999);
765
766 ogroup->setLayout(oLayout);
767
768 // RINEX Ephemeris
769 // ---------------
770 QGridLayout* eLayout = new QGridLayout;
771 eLayout->setColumnMinimumWidth(0,14*ww);
772 _ephIntrComboBox->setMaximumWidth(9*ww);
773 _ephOutPortLineEdit->setMaximumWidth(9*ww);
774
775 eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
776 eLayout->addWidget(new QLabel("Directory"), 1, 0);
777 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
778 eLayout->addWidget(new QLabel("Interval"), 2, 0);
779 eLayout->addWidget(_ephIntrComboBox, 2, 1);
780 eLayout->addWidget(new QLabel("Port"), 3, 0);
781 eLayout->addWidget(_ephOutPortLineEdit, 3, 1);
782 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
783 eLayout->addWidget(_ephV3CheckBox, 4, 1);
784 eLayout->addWidget(new QLabel("Version 3 filenames"), 4, 2);
785 eLayout->addWidget(_ephV3filenameCheckBox, 4, 3);
786 eLayout->setRowStretch(5, 999);
787
788 egroup->setLayout(eLayout);
789
790
791 // Broadcast Corrections
792 // ---------------------
793 QGridLayout* cLayout = new QGridLayout;
794 cLayout->setColumnMinimumWidth(0,14*ww);
795 _corrIntrComboBox->setMaximumWidth(9*ww);
796 _corrPortLineEdit->setMaximumWidth(9*ww);
797
798 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
799 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
800 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,30);
801 cLayout->addWidget(new QLabel("Interval"), 2, 0);
802 cLayout->addWidget(_corrIntrComboBox, 2, 1);
803 cLayout->addWidget(new QLabel("Port"), 3, 0);
804 cLayout->addWidget(_corrPortLineEdit, 3, 1);
805 cLayout->addWidget(new QLabel(""), 4, 1);
806 cLayout->setRowStretch(7, 999);
807 cgroup->setLayout(cLayout);
808
809 // Feed Engine
810 // -----------
811 QGridLayout* sLayout = new QGridLayout;
812 sLayout->setColumnMinimumWidth(0,14*ww);
813 _outPortLineEdit->setMaximumWidth(9*ww);
814 _outWaitSpinBox->setMaximumWidth(9*ww);
815 _outSamplSpinBox->setMaximumWidth(9*ww);
816 _outUPortLineEdit->setMaximumWidth(9*ww);
817
818 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
819 sLayout->addWidget(new QLabel("Port"), 1, 0);
820 sLayout->addWidget(_outPortLineEdit, 1, 1);
821 sLayout->addWidget(new QLabel(" Wait for full obs epoch"), 1, 2, Qt::AlignRight);
822 sLayout->addWidget(_outWaitSpinBox, 1, 3, Qt::AlignLeft);
823 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
824 sLayout->addWidget(_outSamplSpinBox, 2, 1, Qt::AlignLeft);
825 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
826 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 10);
827 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
828 sLayout->addWidget(_outUPortLineEdit, 4, 1);
829 sLayout->addWidget(new QLabel(""), 5, 1);
830 sLayout->setRowStretch(6, 999);
831
832 sgroup->setLayout(sLayout);
833
834 // Serial Output
835 // -------------
836 QGridLayout* serLayout = new QGridLayout;
837 serLayout->setColumnMinimumWidth(0,12*ww);
838 _serialBaudRateComboBox->setMaximumWidth(9*ww);
839 _serialFlowControlComboBox->setMaximumWidth(11*ww);
840 _serialDataBitsComboBox->setMaximumWidth(5*ww);
841 _serialParityComboBox->setMaximumWidth(9*ww);
842 _serialStopBitsComboBox->setMaximumWidth(5*ww);
843 _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
844 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
845 _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
846
847 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
848 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
849 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
850 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
851 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
852 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
853 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
854 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
855 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
856 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
857 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
858 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
859 serLayout->addWidget(_serialParityComboBox, 4, 3);
860 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
861 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
862 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
863 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
864 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
865 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,10);
866 serLayout->addWidget(new QLabel("Height"), 5,14, Qt::AlignRight);
867 serLayout->addWidget(_serialHeightNMEALineEdit, 5,15, 1,11);
868 serLayout->addWidget(new QLabel("Sampling"), 5,25, Qt::AlignRight);
869 serLayout->addWidget(_serialManualNMEASamplingSpinBox, 5,26, 1,12);
870 serLayout->addWidget(new QLabel(""), 6, 1);
871 serLayout->setRowStretch(7, 999);
872
873 sergroup->setLayout(serLayout);
874
875 // Outages
876 // -------
877 QGridLayout* aLayout = new QGridLayout;
878 aLayout->setColumnMinimumWidth(0,14*ww);
879 _adviseObsRateComboBox->setMaximumWidth(9*ww);
880 _adviseFailSpinBox->setMaximumWidth(9*ww);
881 _adviseRecoSpinBox->setMaximumWidth(9*ww);
882
883 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
884 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
885 aLayout->addWidget(_adviseObsRateComboBox, 1, 1);
886 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
887 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
888 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
889 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
890 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
891 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,20);
892 aLayout->addWidget(new QLabel(""), 5, 1);
893 aLayout->setRowStretch(6, 999);
894
895 agroup->setLayout(aLayout);
896
897 // Miscellaneous
898 // -------------
899 QGridLayout* rLayout = new QGridLayout;
900 rLayout->setColumnMinimumWidth(0,14*ww);
901 _miscIntrComboBox->setMaximumWidth(9*ww);
902 _miscPortLineEdit->setMaximumWidth(9*ww);
903
904 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
905 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
906 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1, 7);
907 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
908 rLayout->addWidget(_miscIntrComboBox, 2, 1);
909 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
910 rLayout->addWidget(_miscScanRTCMCheckBox, 3, 1);
911 rLayout->addWidget(new QLabel("Port"), 4, 0);
912 rLayout->addWidget(_miscPortLineEdit, 4, 1);
913 rLayout->addWidget(new QLabel(""), 5, 1);
914 rLayout->setRowStretch(6, 999);
915
916 rgroup->setLayout(rLayout);
917
918 // PPP
919 // ---
920 _pppWidgets._dataSource->setMaximumWidth(15*ww);
921 _pppWidgets._corrMount->setMaximumWidth(15*ww);
922 _pppWidgets._nmeaPath->setMaximumWidth(35*ww);
923 _pppWidgets._logPath->setMaximumWidth(35*ww);
924 _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
925 _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
926 _pppWidgets._snxtroAc ->setMaximumWidth(10*ww);
927 _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
928
929 QGridLayout* pppLayout1 = new QGridLayout();
930 int ir = 0;
931 pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output.<br>"), ir, 0, 1, 7, Qt::AlignLeft);
932 ++ir;
933 pppLayout1->addWidget(new QLabel("Data source"), ir, 0);
934 pppLayout1->addWidget(_pppWidgets._dataSource, ir, 1);
935 pppLayout1->addWidget(new QLabel(" Version 3 filenames"),ir, 4);
936 pppLayout1->addWidget(_pppWidgets._v3filenames, ir, 5, 1, 3);
937 ++ir;
938 pppLayout1->addWidget(new QLabel("Corrections stream"), ir, 0);
939 pppLayout1->addWidget(_pppWidgets._corrMount, ir, 1);
940 pppLayout1->addWidget(new QLabel("Corrections file"), ir, 2);
941 pppLayout1->addWidget(_pppWidgets._corrFile, ir, 3);
942 pppLayout1->addWidget(new QLabel(" Logfile directory"), ir, 4);
943 pppLayout1->addWidget(_pppWidgets._logPath, ir, 5, 1, 3);
944 ++ir;
945 pppLayout1->addWidget(new QLabel("RINEX Obs file"), ir, 0);
946 pppLayout1->addWidget(_pppWidgets._rinexObs, ir, 1);
947 pppLayout1->addWidget(new QLabel("RINEX Nav file"), ir, 2);
948 pppLayout1->addWidget(_pppWidgets._rinexNav, ir, 3);
949 pppLayout1->addWidget(new QLabel(" NMEA directory"), ir, 4);
950 pppLayout1->addWidget(_pppWidgets._nmeaPath, ir, 5, 1, 3);
951 ++ir;
952 pppLayout1->addWidget(new QLabel("Coordinates file"), ir, 0);
953 pppLayout1->addWidget(_pppWidgets._crdFile, ir, 1);
954 pppLayout1->addWidget(new QLabel("ANTEX file"), ir, 2);
955 pppLayout1->addWidget(_pppWidgets._antexFile, ir, 3);
956 pppLayout1->addWidget(new QLabel(" SNX TRO directory"), ir, 4);
957 pppLayout1->addWidget(_pppWidgets._snxtroPath, ir, 5, 1, 3);
958 ++ir;
959#ifdef USE_PPP
960 pppLayout1->addWidget(new QLabel("BLQ file"), ir, 0);
961 pppLayout1->addWidget(_pppWidgets._blqFile, ir, 1);
962#endif
963 pppLayout1->addWidget(new QLabel(" SNX TRO interval"), ir, 4);
964 pppLayout1->addWidget(_pppWidgets._snxtroIntr, ir, 5);
965 pppLayout1->addWidget(new QLabel(" SNX TRO sampling"), ir, 6);
966 pppLayout1->addWidget(_pppWidgets._snxtroSampl, ir, 7, Qt::AlignRight);
967 ++ir;
968 pppLayout1->addWidget(new QLabel(" SNX TRO AC"), ir, 4);
969 pppLayout1->addWidget(_pppWidgets._snxtroAc, ir, 5);
970 pppLayout1->addWidget(new QLabel(" SNX TRO solution"), ir, 6);
971 pppLayout1->addWidget(_pppWidgets._snxtroSol, ir, 7, Qt::AlignRight);
972 pppLayout1->setRowStretch(ir+1, 999);
973 pppGroup1->setLayout(pppLayout1);
974
975 QVBoxLayout* pppLayout2 = new QVBoxLayout();
976 pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
977 pppLayout2->addWidget(_pppWidgets._staTable, 99);
978 QHBoxLayout* pppLayout2sub = new QHBoxLayout();
979 pppLayout2sub->addWidget(_pppWidgets._addStaButton);
980 pppLayout2sub->addWidget(_pppWidgets._delStaButton);
981 pppLayout2sub->addStretch(99);
982
983 pppLayout2->addLayout(pppLayout2sub);
984
985 pppGroup2->setLayout(pppLayout2);
986
987 QGridLayout* pppLayout3 = new QGridLayout();
988 ir = 0;
989 pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
990 ++ir;
991 pppLayout3->addWidget(new QLabel("GPS LCs"), ir, 0, Qt::AlignLeft);
992 pppLayout3->addWidget(_pppWidgets._lcGPS, ir, 1);
993 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 2);
994 pppLayout3->addWidget(new QLabel("Sigma C1"), ir, 3, Qt::AlignLeft);
995 pppLayout3->addWidget(_pppWidgets._sigmaC1, ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
996 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 5);
997 pppLayout3->addWidget(new QLabel("Sigma L1"), ir, 6, Qt::AlignLeft);
998 pppLayout3->addWidget(_pppWidgets._sigmaL1, ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
999 ++ir;
1000 pppLayout3->addWidget(new QLabel("GLONASS LCs"), ir, 0, Qt::AlignLeft);
1001 pppLayout3->addWidget(_pppWidgets._lcGLONASS, ir, 1);
1002 pppLayout3->addWidget(new QLabel("Max Res C1"), ir, 3, Qt::AlignLeft);
1003 pppLayout3->addWidget(_pppWidgets._maxResC1, ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
1004 pppLayout3->addWidget(new QLabel("Max Res L1"), ir, 6, Qt::AlignLeft);
1005 pppLayout3->addWidget(_pppWidgets._maxResL1, ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
1006 ++ir;
1007 pppLayout3->addWidget(new QLabel("Galileo LCs"), ir, 0, Qt::AlignLeft);
1008 pppLayout3->addWidget(_pppWidgets._lcGalileo, ir, 1);
1009 pppLayout3->addWidget(new QLabel("Ele Wgt Code"), ir, 3, Qt::AlignLeft);
1010 pppLayout3->addWidget(_pppWidgets._eleWgtCode, ir, 4);
1011 pppLayout3->addWidget(new QLabel("Ele Wgt Phase"), ir, 6, Qt::AlignLeft);
1012 pppLayout3->addWidget(_pppWidgets._eleWgtPhase, ir, 7);
1013 ++ir;
1014 pppLayout3->addWidget(new QLabel("BDS LCs"), ir, 0, Qt::AlignLeft);
1015 pppLayout3->addWidget(_pppWidgets._lcBDS, ir, 1);
1016 pppLayout3->addWidget(new QLabel("Min # of Obs"), ir, 3, Qt::AlignLeft);
1017 pppLayout3->addWidget(_pppWidgets._minObs, ir, 4);
1018 pppLayout3->addWidget(new QLabel("Min Elevation"), ir, 6, Qt::AlignLeft);
1019 pppLayout3->addWidget(_pppWidgets._minEle, ir, 7);
1020 ++ir;
1021 pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
1022 pppLayout3->addWidget(_pppWidgets._corrWaitTime, ir, 1);
1023 pppLayout3->addWidget(new QLabel("Seeding (sec)"), ir, 3, Qt::AlignLeft);
1024 pppLayout3->addWidget(_pppWidgets._seedingTime, ir, 4);
1025 ++ir;
1026 pppLayout3->addWidget(new QLabel(""), ir, 8);
1027 pppLayout3->setColumnStretch(8, 999);
1028 ++ir;
1029 pppLayout3->addWidget(new QLabel(""), ir, 1);
1030 pppLayout3->setRowStretch(ir, 999);
1031
1032 pppGroup3->setLayout(pppLayout3);
1033
1034 // ------------------------
1035 connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1036 _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
1037 _pppWidgets._audioResponse->setMaximumWidth(8*ww);
1038
1039 QGridLayout* pppLayout4 = new QGridLayout();
1040 ir = 0;
1041 pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
1042 ++ir;
1043 pppLayout4->addWidget(new QLabel("PPP Plot"), ir, 0, Qt::AlignLeft);
1044 pppLayout4->addWidget(_pppWidgets._plotCoordinates, ir, 1, Qt::AlignLeft);
1045 pppLayout4->addWidget(new QLabel("Mountpoint"), ir, 2, 1, 10, Qt::AlignLeft);
1046 pppLayout4->addWidget(_pppWidgets._audioResponse, ir, 4, Qt::AlignLeft);
1047 pppLayout4->addWidget(new QLabel("Audio response"), ir, 5, Qt::AlignRight);
1048
1049 ++ir;
1050 pppLayout4->addWidget(new QLabel("Track map"), ir, 0, Qt::AlignLeft);
1051 pppLayout4->addWidget(_pppWidgets._mapWinButton, ir, 1, Qt::AlignLeft);
1052 pppLayout4->addWidget(new QLabel("OSM"), ir, 2, Qt::AlignLeft);
1053 pppLayout4->addWidget(_pppWidgets._useOpenStreetMap, ir, 3, Qt::AlignLeft);
1054 pppLayout4->addWidget(new QLabel("Google"), ir, 3, Qt::AlignRight);
1055 pppLayout4->addWidget(_pppWidgets._useGoogleMap, ir, 4, Qt::AlignLeft);
1056 ++ir;
1057 pppLayout4->addWidget(new QLabel("Dot-properties"), ir, 0, Qt::AlignLeft);
1058 pppLayout4->addWidget(_pppWidgets._mapWinDotSize, ir, 1, Qt::AlignLeft);
1059 pppLayout4->addWidget(new QLabel("Size "), ir, 2, Qt::AlignLeft);
1060 pppLayout4->addWidget(_pppWidgets._mapWinDotColor, ir, 3, Qt::AlignLeft);
1061 pppLayout4->addWidget(new QLabel("Color"), ir, 4, Qt::AlignLeft);
1062 ++ir;
1063 pppLayout4->addWidget(new QLabel("Post-processing speed"), ir, 0, Qt::AlignLeft);
1064 pppLayout4->addWidget(_pppWidgets._mapSpeedSlider, ir, 1, 1, 20, Qt::AlignLeft);
1065 ++ir;
1066 pppLayout4->addWidget(new QLabel(""), ir, 1);
1067 pppLayout4->setRowStretch(ir, 999);
1068
1069 pppGroup4->setLayout(pppLayout4);
1070
1071 // Reqc Processing
1072 // ---------------
1073 _reqcActionComboBox = new QComboBox();
1074 _reqcActionComboBox->setEditable(false);
1075 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1076 int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1077 if (ik != -1) {
1078 _reqcActionComboBox->setCurrentIndex(ik);
1079 }
1080 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1081 this, SLOT(slotBncTextChanged()));
1082
1083 QGridLayout* reqcLayout = new QGridLayout;
1084 _reqcActionComboBox->setMinimumWidth(15*ww);
1085 _reqcActionComboBox->setMaximumWidth(20*ww);
1086
1087 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1088 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1089
1090 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1091 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1092 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1093 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1094 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1095 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1096 _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1097
1098 connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1099 this, SLOT(slotBncTextChanged()));
1100
1101 _reqcLogSummaryOnly = new QCheckBox();
1102 _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1103
1104 ir = 0;
1105 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1106 ++ir;
1107 reqcLayout->addWidget(new QLabel("Action"), ir, 0);
1108 reqcLayout->addWidget(_reqcActionComboBox, ir, 1);
1109 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1110 _reqcEditOptionButton->setMinimumWidth(15*ww);
1111 _reqcEditOptionButton->setMaximumWidth(20*ww);
1112
1113 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3);
1114 ++ir;
1115 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0);
1116 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1);
1117 _reqcObsFileChooser->setMaximumWidth(40*ww);
1118 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1119 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3);
1120 _reqcNavFileChooser->setMaximumWidth(40*ww);
1121 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1122 ++ir;
1123 reqcLayout->addWidget(new QLabel("Output file (full path)"), ir, 0);
1124 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1);
1125 _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1126 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1127 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3);
1128 _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1129 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1130 ++ir;
1131 reqcLayout->addWidget(new QLabel("Logfile"), ir, 0);
1132 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1);
1133 _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1134 reqcLayout->addWidget(new QLabel(" Summary only"), ir, 2);
1135 reqcLayout->addWidget(_reqcLogSummaryOnly, ir, 3);
1136 ++ir;
1137 reqcLayout->addWidget(new QLabel("Plots for signals"), ir, 0);
1138 reqcLayout->addWidget(_reqcSkyPlotSignals, ir, 1);
1139 _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1140 ++ir;
1141 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0);
1142 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1);
1143 _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1144 ++ir;
1145 reqcLayout->setRowStretch(ir, 999);
1146
1147 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1148 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1149
1150 reqcgroup->setLayout(reqcLayout);
1151
1152 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1153 this, SLOT(slotReqcEditOption()));
1154
1155 QGridLayout* sp3CompLayout = new QGridLayout;
1156
1157 _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1158 _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1159 _sp3CompFileChooser->setMinimumWidth(15*ww);
1160 _sp3CompFileChooser->setMaximumWidth(40*ww);
1161
1162 _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1163 _sp3CompExclude->setMinimumWidth(18*ww);
1164 _sp3CompExclude->setMaximumWidth(18*ww);
1165
1166 _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1167 _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1168 _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1169
1170 ir = 0;
1171 sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"), ir, 0, 1, 40);
1172 ++ir;
1173 sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"), ir, 0, Qt::AlignLeft);
1174 sp3CompLayout->addWidget(_sp3CompFileChooser, ir, 1, 1, 20);
1175 ++ir;
1176 sp3CompLayout->addWidget(new QLabel("Exclude satellites"), ir, 0, Qt::AlignLeft);
1177 sp3CompLayout->addWidget(_sp3CompExclude, ir, 1, Qt::AlignRight);
1178 ++ir;
1179 sp3CompLayout->addWidget(new QLabel("Logfile"), ir, 0, Qt::AlignLeft);
1180 sp3CompLayout->addWidget(_sp3CompLogLineEdit, ir, 1, Qt::AlignRight);
1181 ++ir;
1182 sp3CompLayout->addWidget(new QLabel(""), ir, 1);
1183 ++ir;
1184 sp3CompLayout->setRowStretch(ir, 999);
1185
1186 sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1187 sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1188
1189 sp3CompGroup->setLayout(sp3CompLayout);
1190
1191 connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1192 this, SLOT(slotBncTextChanged()));
1193
1194 // Combine Corrections
1195 // -------------------
1196 QGridLayout* cmbLayout = new QGridLayout;
1197
1198 populateCmbTable();
1199 cmbLayout->addWidget(_cmbTable, 0, 0, 8, 3);
1200 cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1201 cmbLayout->addWidget(addCmbRowButton, 2, 6);
1202 cmbLayout->addWidget(delCmbRowButton, 2, 7);
1203 cmbLayout->addWidget(new QLabel("Method"), 3, 6, Qt::AlignRight);
1204 cmbLayout->addWidget(_cmbMethodComboBox, 3, 7);
1205 cmbLayout->addWidget(new QLabel(" Maximal residuum"), 4, 6, Qt::AlignRight);
1206 cmbLayout->addWidget(_cmbMaxresLineEdit, 4, 7, Qt::AlignRight);
1207 cmbLayout->addWidget(new QLabel("Sampling"), 5, 6, Qt::AlignRight);
1208 cmbLayout->addWidget(_cmbSamplSpinBox, 5, 7);
1209 cmbLayout->addWidget(new QLabel(" Use GLONASS"), 6, 6, Qt::AlignRight);
1210 cmbLayout->addWidget(_cmbUseGlonass, 6, 7);
1211 cmbLayout->setRowStretch(7, 999);
1212
1213 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1214 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1215
1216 cmbgroup->setLayout(cmbLayout);
1217
1218 // Upload Layout (Clocks)
1219 // ----------------------
1220 QGridLayout* uploadHlpLayout = new QGridLayout();
1221
1222 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1223 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1224 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1225
1226 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1227 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1228 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1229 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1230 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1231 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1232 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1233 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1234 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1235 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1236 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1237 uploadHlpLayout->addWidget(new QLabel("ANTEX file"), 1, 0, Qt::AlignLeft);
1238 uploadHlpLayout->addWidget(_uploadAntexFile, 1, 1, 1, 4);
1239
1240 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1241 populateUploadTable();
1242
1243 uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1244 uploadLayout->addWidget(_uploadTable);
1245 uploadLayout->addLayout(uploadHlpLayout);
1246
1247 uploadgroup->setLayout(uploadLayout);
1248
1249 // Upload Layout (Ephemeris)
1250 // -------------------------
1251 QGridLayout* uploadHlpLayoutEph = new QGridLayout();
1252
1253 connect(addUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadEphRow()));
1254 connect(delUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadEphRow()));
1255
1256 uploadHlpLayoutEph->addWidget(addUploadEphRowButton, 0, 0);
1257 uploadHlpLayoutEph->addWidget(delUploadEphRowButton, 0, 1);
1258 uploadHlpLayoutEph->addWidget(new QLabel(" Sampling"), 0, 2, Qt::AlignRight);
1259 uploadHlpLayoutEph->addWidget(_uploadSamplRtcmEphSpinBox, 0, 3);
1260
1261 QBoxLayout* uploadLayoutEph = new QBoxLayout(QBoxLayout::TopToBottom);
1262 populateUploadEphTable();
1263
1264 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"));
1265 uploadLayoutEph->addWidget(_uploadEphTable);
1266 uploadLayoutEph->addLayout(uploadHlpLayoutEph);
1267
1268 uploadEphgroup->setLayout(uploadLayoutEph);
1269
1270
1271 // Main Layout
1272 // -----------
1273 QGridLayout* mLayout = new QGridLayout;
1274 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1275 mLayout->addWidget(_aogroup, 0,0);
1276 mLayout->addWidget(_mountPointsTable, 1,0);
1277 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1278 mLayout->addWidget(_loggroup, 2,0);
1279
1280 _canvas->setLayout(mLayout);
1281
1282 // WhatsThis, Network
1283 // ------------------
1284 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet. <i>[key: proxyHost]</i></p>"));
1285 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC. <i>[key: proxyPort]</i></p>"));
1286 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443. <i>[key: sslCaCertPath]</i></p>"));
1287 _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this. <i>[key: sslIgnoreErrors]</i></p>"));
1288
1289 // WhatsThis, General
1290 // ------------------
1291 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date. <i>[key: logFile]</i></p>"));
1292 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far. <i>[key: rnxAppend]</i></p>"));
1293 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals. The default entry is 'no' that means the reread function is switched of. <p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'. <i>[key: onTheFlyInterval]</i></p>"));
1294 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options. <i>[key: autoStart]</i></p>"));
1295 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes. <i>[key: rawOutFile]</i></p>"));
1296
1297 // WhatsThis, RINEX Observations
1298 // -----------------------------
1299 _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files. <i>[key: rnxPath]</i></p>"));
1300 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file. <i>[key: rnxIntr]</i></p>"));
1301 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files. <i>[key: rnxSampl]</i></p>"));
1302 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. <i>[key: rnxSkel]</i></p>"));
1303 _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types. <i>[key: rnxOnlyWithSKL]</i></p>"));
1304 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems). <i>[key: rnxScript]</i></p>"));
1305 _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'C:IQX I:ABCX' (System specific signal priorities for BDS and IRNSS) </li><li>'G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_'. <i>[key: rnxV2Priority]</i></p>"));
1306 _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format. <i>[key: rnxV3]</i></p>"));
1307 _rnxV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format. <i>[key: rnxV3filenames]</i></p>"));
1308
1309 // WhatsThis, RINEX Ephemeris
1310 // --------------------------
1311 _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files. <i>[key: ephPath]</i></p>"));
1312 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file. <i>[key: ephIntr]</i></p>"));
1313 _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: ephOutPort]</i></p>"));
1314 _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format. <i>[key: ephV3]</i></p>"));
1315 _ephV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format. <i>[key: ephV3filenames]</i></p>"));
1316
1317 // WhatsThis, RINEX Editing & QC
1318 // -----------------------------
1319 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program. <i>[key: reqcAction]</i></p>"));
1320 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1321 _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory. <i>[key: reqcObsFile]</i></p>"));
1322 _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory. <i>[key: reqcNavFile]</i></p>"));
1323 _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced. <i>[key: reqcOutObsFile]</i></p>"));
1324 _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced. <i>[key: reqcOutNavFile]</i></p>"));
1325 _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced. <i>[key: reqcOutLogFile]</i></p>"));
1326 _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information. <i>[key: reqcLogSummaryOnly]</i></p>"));
1327 _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk. <i>[key: reqcPlotDir]</i></p>"));
1328 _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default. <i>[key: reqcSkyPlotSignals]</i></p>"));
1329
1330 // WhatsThis, SP3 Comparison
1331 // -------------------------
1332 _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma. <i>[key: sp3CompFile]</i></p>"));
1333 _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison. <i>[key: sp3CompExclude]</i></p>"));
1334 _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless. <i>[key: sp3CompOutLogFile]</i></p>"));
1335
1336 // WhatsThis, Broadcast Corrections
1337 // --------------------------------
1338 _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files. <i>[key: corrPath]</i></p>"));
1339 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files. <i>[key: corrIntr]</i></p>"));
1340 _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: corrPort]</i></p>"));
1341
1342 // WhatsThis, Feed Engine
1343 // ----------------------
1344 _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outPort]</i></p>"));
1345 _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product. <i>[key: outWait]</i></p>"));
1346 _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs. <i>[key: outSampl]</i></p>"));
1347 _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams. <i>[key: outFile]</i></p>"));
1348 _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outUPort]</i></p>"));
1349
1350 // WhatsThis, Serial Output
1351 // ------------------------
1352 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware. <i>[key: serialMountPoint]</i></p>"));
1353 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here. <i>[key: serialPortName]</i></p>"));
1354 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended. <i>[key: serialBaudRate]</i></p>"));
1355 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better. <i>[key: serialFlowControl]</i></p>"));
1356 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used. <i>[key: serialDataBits]</i></p>"));
1357 _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'. <i>[key: serialParity]</i></p>"));
1358 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used. <i>[key: serialStopBits]</i></p>"));
1359 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file. <i>[key: serialAutoNMEA]</i></p>"));
1360 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk. <i>[key: serialFileNMEA]</i></p>"));
1361 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively. <i>[key: serialHeightNMEA]</i></p>"));
1362 _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals. <i>[key: serialManualNMEASampling]</i></p>"));
1363
1364 // WhatsThis, Outages
1365 // ------------------
1366 _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span. <i>[key: adviseObsRate]</i></p>"));
1367 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note. <i>[key: adviseFail]</i></p>"));
1368 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note. <i>[key: adviseReco]</i></p>"));
1369 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option. <i>[key: adviseScript]</i></p>"));
1370
1371 // WhatsThis, Miscellaneous
1372 // ------------------------
1373 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options. <i>[key: miscMount]</i></p>"));
1374 _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information. <i>[key: miscIntr]</i></p>"));
1375 _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types. <i>[key: miscScanRTCM]</i></p>"));
1376 _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function. <i>[key: miscPort]</i></p>"));
1377
1378 // WhatsThis, PPP (1)
1379 // ------------------
1380 _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations. <i>[key: PPP/dataSource]</i></p>"));
1381 _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file. <i>[key: PPP/rinexObs]</i></p>"));
1382 _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file. <i>[key: PPP/rinexNav]</i></p>"));
1383 _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP. <i>[key: PPP/corrMount]</i></p>"));
1384 _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP. <i>[key: PPP/corrFile]</i></p>"));
1385 _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations. <i>[key: PPP/antexFile]</i></p>"));
1386 _pppWidgets._blqFile->setWhatsThis(tr("<p>Enter the full path to an ocean loading file in BLQ format. It contains a record for each site, which shows a header with information on the ocean tide model, the site name and the geographic coordinates. The first three rows of numbers designate amplitudes (meter), radial, west, south, and are followed by three lines with the corresponding phase values (degrees). <i>[key: PPP/blqFile]</i></p>"));
1387 _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored. <i>[key: PPP/crdFile]</i></p>"));
1388 _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames. <i>[key: PPP/v3filenames]</i></p>"));
1389 _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced. <i>[key: PPP/logPath]</i></p>"));
1390 _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced. <i>[key: PPP/nmeaPath]</i></p>"));
1391 _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced. <i>[key: PPP/snxtroPath]</i></p>"));
1392 _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'. <i>[key: PPP/snxtroIntr]</i></p>"));
1393 _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk. <i>[key: PPP/snxtroSampl]</i></p>"));
1394 _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files. <i>[key: PPP/snxtroAc]</i></p>"));
1395 _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC. <i>[key: PPP/snxtroSol]</i></p>"));
1396
1397 // WhatsThis, PPP (3)
1398 // ------------------
1399 _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data. <i>[key: PPP/lcGPS]</i></p>"));
1400 _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data. <i>[key: PPP/lcGLONASS]</i></p>"));
1401 _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data. <i>[key: PPP/lcGalileo]</i></p>"));
1402 _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data. <i>[key: PPP/lcBDS]</i></p>"));
1403 _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0' <i>[key: PPP/sigmaC1]</i></p>"));
1404 _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01' <i>[key: PPP/sigmaL1]</i></p>"));
1405 _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0' <i>[key: PPP/maxResC1]</i></p>"));
1406 _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03' <i>[key: PPP/maxResL1]</i></p>"));
1407 _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution. <i>[key: PPP/eleWgtCode]</i></p>"));
1408 _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution. <i>[key: PPP/eleWgtPhase]</i></p>"));
1409 _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum. <i>[key: PPP/minObs]</i></p>"));
1410 _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations. <i>[key: PPP/minEle]</i></p>"));
1411
1412 // WhatsThis, Combine Corrections
1413 // ------------------------------
1414 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format. <i>[key: cmbStreams]</i></p>"));
1415 addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1416 delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1417 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning. <i>[key: cmbMethod]</i></p>"));
1418 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'. <i>[key: cmbMaxres]</i></p>"));
1419 _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice. <i>[key: cmbSampl]</i></p>"));
1420 _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination. <i>[key: cmbUseGlonass]</i></p>"));
1421
1422 // WhatsThis, Upload Corrections
1423 // -----------------------------
1424 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table. <i>[key: uploadMountpointsOut]</i></p>"));
1425 addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1426 delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Corrections' table.</p>"));
1427 _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files. <i>[key: uploadIntr]</i></p>"));
1428 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages. <i>[key: uploadSamplRtcmEphCorr]</i></p>"));
1429 _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files. <i>[key: uploadSamplSp3]</i></p>"));
1430 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files. <i>[key: uploadSamplClkRnx]</i></p>"));
1431 setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1432 _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs. <i>[key: uploadAntexFile]</i></p>"));
1433
1434 // WhatsThis, Upload Ephemeris
1435 // ---------------------------
1436 _uploadEphTable->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the respective stream. <i>[key: uploadEphHost]</i></p>"));
1437 addUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Ephemeris' table.</p>"));
1438 delUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Ephemeris' table.</p>"));
1439 _uploadSamplRtcmEphSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds. <i>[key: uploadSamplRtcmEph]</i></p>"));
1440
1441 // WhatsThis, Streams Canvas
1442 // -------------------------
1443 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. <i>[key: mountPoints]</i></p>"));
1444 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1445 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1446 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1447 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1448 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1449
1450 // WhatsThis, Log Canvas
1451 // ---------------------
1452 _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1453 _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1454 _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1455 _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1456
1457
1458 // Enable/Disable all Widgets
1459 // --------------------------
1460 slotBncTextChanged();
1461 enableStartStop();
1462
1463 // Auto start
1464 // ----------
1465 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1466 slotStart();
1467 }
1468}
1469
1470// Destructor
1471////////////////////////////////////////////////////////////////////////////
1472bncWindow::~bncWindow() {
1473 if (_caster) {
1474 delete _caster; BNC_CORE->setCaster(0);
1475 }
1476 if (_casterEph) {
1477 delete _casterEph;
1478 }
1479 delete _bncFigureLate;
1480 delete _bncFigurePPP;
1481 delete _actHelp;
1482 delete _actAbout;
1483 delete _actFlowchart;
1484 delete _actFontSel;
1485 delete _actSaveOpt;
1486 delete _actQuit;
1487 delete _actAddMountPoints;
1488 delete _actDeleteMountPoints;
1489 delete _actMapMountPoints;
1490 delete _actStart;
1491 delete _actStop;
1492 delete _actwhatsthis;
1493 delete _proxyHostLineEdit;
1494 delete _proxyPortLineEdit;
1495 delete _sslCaCertPathLineEdit;
1496 delete _sslIgnoreErrorsCheckBox;
1497 delete _logFileLineEdit;
1498 delete _rawOutFileLineEdit;
1499 delete _rnxAppendCheckBox;
1500 delete _onTheFlyComboBox;
1501 delete _autoStartCheckBox;
1502 delete _rnxPathLineEdit;
1503 delete _rnxIntrComboBox;
1504 delete _rnxSamplSpinBox;
1505 delete _rnxFileCheckBox;
1506 delete _rnxSkelLineEdit;
1507 delete _rnxScrpLineEdit;
1508 delete _rnxV3CheckBox;
1509 delete _rnxV3filenameCheckBox;
1510 delete _rnxV2Priority;
1511 delete _ephPathLineEdit;
1512 delete _ephIntrComboBox;
1513 delete _ephOutPortLineEdit;
1514 delete _ephV3CheckBox;
1515 delete _ephV3filenameCheckBox;
1516 delete _corrPathLineEdit;
1517 delete _corrIntrComboBox;
1518 delete _corrPortLineEdit;
1519 delete _outPortLineEdit;
1520 delete _outWaitSpinBox;
1521 delete _outSamplSpinBox;
1522 delete _outFileLineEdit;
1523 delete _outUPortLineEdit;
1524 delete _serialMountPointLineEdit;
1525 delete _serialPortNameLineEdit;
1526 delete _serialBaudRateComboBox;
1527 delete _serialFlowControlComboBox;
1528 delete _serialDataBitsComboBox;
1529 delete _serialParityComboBox;
1530 delete _serialStopBitsComboBox;
1531 delete _serialAutoNMEAComboBox;
1532 delete _serialFileNMEALineEdit;
1533 delete _serialHeightNMEALineEdit;
1534 delete _serialManualNMEASamplingSpinBox;
1535 delete _adviseObsRateComboBox;
1536 delete _adviseFailSpinBox;
1537 delete _adviseRecoSpinBox;
1538 delete _adviseScriptLineEdit;
1539 delete _miscMountLineEdit;
1540 delete _miscPortLineEdit;
1541 delete _miscIntrComboBox;
1542 delete _miscScanRTCMCheckBox;
1543 _mountPointsTable->deleteLater();
1544 delete _log;
1545 delete _loggroup;
1546 _cmbTable->deleteLater();
1547 delete _cmbMaxresLineEdit;
1548 delete _cmbUseGlonass;
1549 delete _cmbSamplSpinBox;
1550 delete _cmbMethodComboBox;;
1551 _uploadEphTable->deleteLater();
1552 delete _uploadSamplRtcmEphCorrSpinBox;
1553 _uploadTable->deleteLater();
1554 delete _uploadIntrComboBox;
1555 delete _uploadAntexFile;
1556 delete _uploadSamplRtcmEphSpinBox;
1557 delete _uploadSamplSp3SpinBox;
1558 delete _uploadSamplClkRnxSpinBox;
1559 delete _reqcActionComboBox;
1560 delete _reqcObsFileChooser;
1561 delete _reqcNavFileChooser;
1562 delete _reqcOutObsLineEdit;
1563 delete _reqcOutNavLineEdit;
1564 delete _reqcOutLogLineEdit;
1565 delete _reqcPlotDirLineEdit;
1566 delete _reqcSkyPlotSignals;
1567 delete _reqcLogSummaryOnly;
1568 delete _reqcEditOptionButton;
1569 delete _sp3CompFileChooser;
1570 delete _sp3CompExclude;
1571 delete _sp3CompLogLineEdit;
1572 //delete _canvas;
1573}
1574
1575//
1576////////////////////////////////////////////////////////////////////////////
1577void bncWindow::populateMountPointsTable() {
1578
1579 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1580 _mountPointsTable->removeRow(iRow);
1581 }
1582
1583 bncSettings settings;
1584
1585 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1586 int iRow = 0;
1587 while (it.hasNext()) {
1588 QStringList hlp = it.next().split(" ");
1589 if (hlp.size() < 7) continue;
1590 _mountPointsTable->insertRow(iRow);
1591
1592 QUrl url(hlp[0]);
1593
1594 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1595 QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1596 QString nmea(hlp[5]);
1597 if (hlp[6] == "S") {
1598 fullPath = hlp[0].replace(0,2,"");
1599 }
1600 QString ntripVersion = "2";
1601 if (hlp.size() >= 7) {
1602 ntripVersion = (hlp[6]);
1603 }
1604
1605 QTableWidgetItem* it;
1606 it = new QTableWidgetItem(url.userInfo());
1607 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1608 _mountPointsTable->setItem(iRow, 0, it);
1609
1610 it = new QTableWidgetItem(fullPath);
1611 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1612 _mountPointsTable->setItem(iRow, 1, it);
1613
1614 it = new QTableWidgetItem(format);
1615 _mountPointsTable->setItem(iRow, 2, it);
1616
1617 it = new QTableWidgetItem(country);
1618 _mountPointsTable->setItem(iRow, 3, it);
1619
1620 if (nmea == "yes") {
1621 it = new QTableWidgetItem(latitude);
1622 _mountPointsTable->setItem(iRow, 4, it);
1623 it = new QTableWidgetItem(longitude);
1624 _mountPointsTable->setItem(iRow, 5, it);
1625 } else {
1626 it = new QTableWidgetItem(latitude);
1627 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1628 _mountPointsTable->setItem(iRow, 4, it);
1629
1630 it = new QTableWidgetItem(longitude);
1631 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1632 _mountPointsTable->setItem(iRow, 5, it);
1633 }
1634
1635 it = new QTableWidgetItem(nmea);
1636 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1637 _mountPointsTable->setItem(iRow, 6, it);
1638
1639 it = new QTableWidgetItem(ntripVersion);
1640 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1641 _mountPointsTable->setItem(iRow, 7, it);
1642
1643 bncTableItem* bncIt = new bncTableItem();
1644 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1645 _mountPointsTable->setItem(iRow, 8, bncIt);
1646
1647 iRow++;
1648 }
1649
1650 _mountPointsTable->sortItems(1);
1651
1652 enableStartStop();
1653}
1654
1655// Retrieve Table
1656////////////////////////////////////////////////////////////////////////////
1657void bncWindow::slotAddMountPoints() {
1658
1659 bncSettings settings;
1660 QString proxyHost = settings.value("proxyHost").toString();
1661 int proxyPort = settings.value("proxyPort").toInt();
1662 if (proxyHost != _proxyHostLineEdit->text() ||
1663 proxyPort != _proxyPortLineEdit->text().toInt()) {
1664 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1665 "changed. Use the new ones?",
1666 QMessageBox::Yes, QMessageBox::No,
1667 QMessageBox::NoButton);
1668 if (iRet == QMessageBox::Yes) {
1669 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1670 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1671 }
1672 }
1673
1674 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1675 settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1676
1677 QMessageBox msgBox;
1678 msgBox.setIcon(QMessageBox::Question);
1679 msgBox.setWindowTitle("Add Stream");
1680 msgBox.setText("Add stream(s) coming from:");
1681
1682 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1683 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1684 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1685 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1686 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1687
1688 msgBox.exec();
1689
1690 if (msgBox.clickedButton() == buttonNtrip) {
1691 bncTableDlg* dlg = new bncTableDlg(this);
1692 dlg->move(this->pos().x()+50, this->pos().y()+50);
1693 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1694 this, SLOT(slotNewMountPoints(QStringList*)));
1695 dlg->exec();
1696 delete dlg;
1697 } else if (msgBox.clickedButton() == buttonIP) {
1698 bncIpPort* ipp = new bncIpPort(this);
1699 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1700 this, SLOT(slotNewMountPoints(QStringList*)));
1701 ipp->exec();
1702 delete ipp;
1703 } else if (msgBox.clickedButton() == buttonUDP) {
1704 bncUdpPort* udp = new bncUdpPort(this);
1705 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1706 this, SLOT(slotNewMountPoints(QStringList*)));
1707 udp->exec();
1708 delete udp;
1709 } else if (msgBox.clickedButton() == buttonSerial) {
1710 bncSerialPort* sep = new bncSerialPort(this);
1711 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1712 this, SLOT(slotNewMountPoints(QStringList*)));
1713 sep->exec();
1714 delete sep;
1715 } else if (msgBox.clickedButton() == buttonCancel) {
1716 // Cancel
1717 }
1718
1719 enableStartStop();
1720}
1721
1722// Delete Selected Mount Points
1723////////////////////////////////////////////////////////////////////////////
1724void bncWindow::slotDeleteMountPoints() {
1725
1726 int nRows = _mountPointsTable->rowCount();
1727 bool flg[nRows];
1728 for (int iRow = 0; iRow < nRows; iRow++) {
1729 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1730 flg[iRow] = true;
1731 }
1732 else {
1733 flg[iRow] = false;
1734 }
1735 }
1736 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1737 if (flg[iRow]) {
1738 _mountPointsTable->removeRow(iRow);
1739 }
1740 }
1741 _actDeleteMountPoints->setEnabled(false);
1742
1743 enableStartStop();
1744}
1745
1746// New Mount Points Selected
1747////////////////////////////////////////////////////////////////////////////
1748void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1749 int iRow = 0;
1750 QListIterator<QString> it(*mountPoints);
1751 while (it.hasNext()) {
1752 QStringList hlp = it.next().split(" ");
1753 QUrl url(hlp[0]);
1754 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1755 QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1756 QString nmea(hlp[5]);
1757 if (hlp[6] == "S") {
1758 fullPath = hlp[0].replace(0,2,"");
1759 }
1760 QString ntripVersion = "2";
1761 if (hlp.size() >= 7) {
1762 ntripVersion = (hlp[6]);
1763 }
1764
1765 _mountPointsTable->insertRow(iRow);
1766
1767 QTableWidgetItem* it;
1768 it = new QTableWidgetItem(url.userInfo());
1769 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1770 _mountPointsTable->setItem(iRow, 0, it);
1771
1772 it = new QTableWidgetItem(fullPath);
1773 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1774 _mountPointsTable->setItem(iRow, 1, it);
1775
1776 it = new QTableWidgetItem(format);
1777 _mountPointsTable->setItem(iRow, 2, it);
1778
1779 it = new QTableWidgetItem(country);
1780 _mountPointsTable->setItem(iRow, 3, it);
1781
1782 if (nmea == "yes") {
1783 it = new QTableWidgetItem(latitude);
1784 _mountPointsTable->setItem(iRow, 4, it);
1785 it = new QTableWidgetItem(longitude);
1786 _mountPointsTable->setItem(iRow, 5, it);
1787 } else {
1788 it = new QTableWidgetItem(latitude);
1789 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1790 _mountPointsTable->setItem(iRow, 4, it);
1791 it = new QTableWidgetItem(longitude);
1792 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1793 _mountPointsTable->setItem(iRow, 5, it);
1794 }
1795
1796 it = new QTableWidgetItem(nmea);
1797 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1798 _mountPointsTable->setItem(iRow, 6, it);
1799
1800 it = new QTableWidgetItem(ntripVersion);
1801 ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1802 _mountPointsTable->setItem(iRow, 7, it);
1803
1804 bncTableItem* bncIt = new bncTableItem();
1805 _mountPointsTable->setItem(iRow, 8, bncIt);
1806
1807 iRow++;
1808 }
1809 _mountPointsTable->hideColumn(0);
1810 _mountPointsTable->hideColumn(3);
1811 _mountPointsTable->sortItems(1);
1812 delete mountPoints;
1813
1814 enableStartStop();
1815}
1816
1817// Save Options (serialize)
1818////////////////////////////////////////////////////////////////////////////
1819void bncWindow::slotSaveOptions() {
1820 saveOptions();
1821 bncSettings settings;
1822 settings.sync();
1823}
1824
1825// Save Options (memory only)
1826////////////////////////////////////////////////////////////////////////////
1827void bncWindow::saveOptions() {
1828
1829 QStringList mountPoints;
1830 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1831
1832 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1833 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1834 "@" + _mountPointsTable->item(iRow, 1)->text() );
1835
1836 mountPoints.append(url.toString() + " " +
1837 _mountPointsTable->item(iRow, 2)->text()
1838 + " " + _mountPointsTable->item(iRow, 3)->text()
1839 + " " + _mountPointsTable->item(iRow, 4)->text()
1840 + " " + _mountPointsTable->item(iRow, 5)->text()
1841 + " " + _mountPointsTable->item(iRow, 6)->text()
1842 + " " + _mountPointsTable->item(iRow, 7)->text());
1843 } else {
1844 mountPoints.append(
1845 "//" + _mountPointsTable->item(iRow, 1)->text()
1846 + " " + _mountPointsTable->item(iRow, 2)->text()
1847 + " " + _mountPointsTable->item(iRow, 3)->text()
1848 + " " + _mountPointsTable->item(iRow, 4)->text()
1849 + " " + _mountPointsTable->item(iRow, 5)->text()
1850 + " " + _mountPointsTable->item(iRow, 6)->text()
1851 + " " + _mountPointsTable->item(iRow, 7)->text());
1852 }
1853 }
1854
1855 QStringList cmbStreams;
1856 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1857 QString hlp;
1858 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1859 if (_cmbTable->item(iRow, iCol)) {
1860 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1861 }
1862 }
1863 if (!hlp.isEmpty()) {
1864 cmbStreams << hlp;
1865 }
1866 }
1867
1868 QStringList uploadMountpointsOut;
1869 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1870 QString hlp;
1871 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1872 if (_uploadTable->cellWidget(iRow, iCol) &&
1873 (iCol == 3 || iCol == 4 || iCol == 5)) {
1874 if (iCol == 3) {
1875 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1876 hlp += passwd->text() + ",";
1877 }
1878 else if (iCol == 4) {
1879 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1880 hlp += system->currentText() + ",";
1881 }
1882 else if (iCol == 5) {
1883 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1884 QString state; state.setNum(com->checkState());
1885 hlp += state + ",";
1886 }
1887 }
1888 else if (_uploadTable->item(iRow, iCol)) {
1889 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1890 }
1891 }
1892 if (!hlp.isEmpty()) {
1893 uploadMountpointsOut << hlp;
1894 }
1895 }
1896
1897 QStringList uploadEphMountpointsOut;
1898 for (int iRow = 0; iRow < _uploadEphTable->rowCount(); iRow++) {
1899 QString hlp;
1900 for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
1901 if (_uploadEphTable->cellWidget(iRow, iCol) &&
1902 (iCol == 3 || iCol == 4)) {
1903 if (iCol == 3) {
1904 QLineEdit* passwd = (QLineEdit*)(_uploadEphTable->cellWidget(iRow, iCol));
1905 hlp += passwd->text() + ",";
1906 }
1907 else if (iCol == 4) {
1908 QComboBox* system = (QComboBox*)(_uploadEphTable->cellWidget(iRow, iCol));
1909 hlp += system->currentText() + ",";
1910 }
1911 }
1912 else if (_uploadEphTable->item(iRow, iCol)) {
1913 hlp += _uploadEphTable->item(iRow, iCol)->text() + ",";
1914 }
1915 }
1916 if (!hlp.isEmpty()) {
1917 uploadEphMountpointsOut << hlp;
1918 }
1919 }
1920
1921 bncSettings settings;
1922
1923 settings.setValue("startTab", _aogroup->currentIndex());
1924 settings.setValue("statusTab", _loggroup->currentIndex());
1925 settings.setValue("mountPoints", mountPoints);
1926// Network
1927 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1928 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1929 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1930 settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1931// General
1932 settings.setValue("logFile", _logFileLineEdit->text());
1933 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1934 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1935 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1936 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1937// RINEX Observations
1938 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1939 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1940 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1941 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1942 settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1943 settings.setValue("rnxV3filenames",_rnxV3filenameCheckBox->checkState());
1944 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1945 (_rnxV3filenameCheckBox->checkState()) ?
1946 settings.setValue("rnxV3", _rnxV3filenameCheckBox->checkState()) :
1947 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1948 settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1949// RINEX Ephemeris
1950 settings.setValue("ephPath", _ephPathLineEdit->text());
1951 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1952 settings.setValue("ephOutPort", _ephOutPortLineEdit->text());
1953 settings.setValue("ephV3filenames", _ephV3filenameCheckBox->checkState());
1954 (_ephV3filenameCheckBox->checkState()) ?
1955 settings.setValue("ephV3", _ephV3filenameCheckBox->checkState()) :
1956 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1957// Broadcast Corrections
1958 settings.setValue("corrPath", _corrPathLineEdit->text());
1959 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1960 settings.setValue("corrPort", _corrPortLineEdit->text());
1961// Feed Engine
1962 settings.setValue("outPort", _outPortLineEdit->text());
1963 settings.setValue("outWait", _outWaitSpinBox->value());
1964 settings.setValue("outSampl", _outSamplSpinBox->value());
1965 settings.setValue("outFile", _outFileLineEdit->text());
1966 settings.setValue("outUPort", _outUPortLineEdit->text());
1967// Serial Output
1968 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1969 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1970 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1971 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1972 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1973 settings.setValue("serialParity", _serialParityComboBox->currentText());
1974 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1975 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1976 settings.setValue("serialFileNMEA", _serialFileNMEALineEdit->text());
1977 settings.setValue("serialHeightNMEA", _serialHeightNMEALineEdit->text());
1978 settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1979// Outages
1980 settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1981 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1982 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1983 settings.setValue("adviseScript", _adviseScriptLineEdit->text());
1984// Miscellaneous
1985 settings.setValue("miscMount", _miscMountLineEdit->text());
1986 settings.setValue("miscPort", _miscPortLineEdit->text());
1987 settings.setValue("miscIntr", _miscIntrComboBox->currentText());
1988 settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1989// Reqc
1990 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1991 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1992 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1993 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1994 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1995 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1996 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1997 settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1998 settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1999// SP3 Comparison
2000 settings.setValue("sp3CompFile", _sp3CompFileChooser->fileName());
2001 settings.setValue("sp3CompExclude", _sp3CompExclude->text());
2002 settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
2003// Combine Corrections
2004 if (!cmbStreams.isEmpty()) {
2005 settings.setValue("cmbStreams", cmbStreams);
2006 }
2007 else {
2008 settings.setValue("cmbStreams", "");
2009 }
2010 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
2011 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
2012 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
2013 settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
2014// Upload Corrections
2015 if (!uploadMountpointsOut.isEmpty()) {
2016 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
2017 }
2018 else {
2019 settings.setValue("uploadMountpointsOut", "");
2020 }
2021 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
2022 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
2023 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
2024 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
2025 settings.setValue("uploadAntexFile", _uploadAntexFile->fileName());
2026// Upload Ephemeris
2027 if (!uploadEphMountpointsOut.isEmpty()) {
2028 settings.setValue("uploadEphMountpointsOut", uploadEphMountpointsOut);
2029 }
2030 else {
2031 settings.setValue("uploadEphMountpointsOut", "");
2032 }
2033 settings.setValue("uploadSamplRtcmEph", _uploadSamplRtcmEphSpinBox->value());
2034
2035 if (_caster) {
2036 _caster->readMountPoints();
2037 }
2038
2039 _pppWidgets.saveOptions();
2040}
2041
2042// All get slots terminated
2043////////////////////////////////////////////////////////////////////////////
2044void bncWindow::slotGetThreadsFinished() {
2045 BNC_CORE->slotMessage("All Get Threads Terminated", true);
2046 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2047 delete _casterEph; _casterEph = 0;
2048 _runningRealTime = false;
2049}
2050
2051// Start It!
2052////////////////////////////////////////////////////////////////////////////
2053void bncWindow::slotStart() {
2054 saveOptions();
2055 if ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
2056 _runningPPP = true;
2057 enableStartStop();
2058 _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
2059 BNC_CORE->startPPP();
2060 _bncFigurePPP->reset();
2061 }
2062 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2063 if (_reqcActionComboBox->currentText() == "Analyze") {
2064 _runningQC = true;
2065 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2066 connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2067 reqcAnalyze->start();
2068 }
2069 else {
2070 _runningEdit = true;
2071 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2072 connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2073 reqcEdit->start();
2074 }
2075 enableStartStop();
2076 }
2077 else if (!_sp3CompFileChooser->fileName().isEmpty()) {
2078 _runningSp3Comp = true;
2079 t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2080 connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2081 sp3Comp->start();
2082 enableStartStop();
2083 }
2084 else {
2085 startRealTime();
2086 BNC_CORE->startPPP();
2087 }
2088}
2089
2090// Start Real-Time (Retrieve Data etc.)
2091////////////////////////////////////////////////////////////////////////////
2092void bncWindow::startRealTime() {
2093
2094 _runningRealTime = true;
2095
2096 _bncFigurePPP->reset();
2097
2098 _actDeleteMountPoints->setEnabled(false);
2099
2100 enableStartStop();
2101
2102 _caster = new bncCaster();
2103
2104 BNC_CORE->setCaster(_caster);
2105 BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2106 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2107 BNC_CORE->initCombination();
2108
2109 connect(_caster, SIGNAL(getThreadsFinished()),
2110 this, SLOT(slotGetThreadsFinished()));
2111
2112 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2113 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2114
2115 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " (" BNC_OS ") ==========", true);
2116
2117 bncSettings settings;
2118
2119 // Active panels
2120 // -------------
2121 if (!_rnxPathLineEdit->text().isEmpty())
2122 BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2123 if (!_ephPathLineEdit->text().isEmpty())
2124 BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2125 if (!_corrPathLineEdit->text().isEmpty())
2126 BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2127 if (!_outPortLineEdit->text().isEmpty())
2128 BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2129 if (!_serialMountPointLineEdit->text().isEmpty())
2130 BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2131 if (!_adviseObsRateComboBox->currentText().isEmpty())
2132 BNC_CORE->slotMessage("Panel 'Outages' active", true);
2133 if (!_miscMountLineEdit->text().isEmpty())
2134 BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2135 if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2136 BNC_CORE->slotMessage("Panel 'PPP' active", true);
2137 if (_cmbTable->rowCount() > 0)
2138 BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2139 if (_uploadTable->rowCount() > 0)
2140 BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2141 if (_uploadEphTable->rowCount() > 0)
2142 BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2143
2144 QDir rnxdir(settings.value("rnxPath").toString());
2145 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2146
2147 QString rnx_file = settings.value("rnxScript").toString();
2148 if ( !rnx_file.isEmpty() ) {
2149 QFile rnxfile(settings.value("rnxScript").toString());
2150 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2151 }
2152
2153 QDir ephdir(settings.value("ephPath").toString());
2154 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2155
2156 QDir corrdir(settings.value("corrPath").toString());
2157 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2158
2159 QString advise_file = settings.value("adviseScript").toString();
2160 if ( !advise_file.isEmpty() ) {
2161 QFile advisefile(settings.value("adviseScript").toString());
2162 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2163 }
2164
2165 _caster->readMountPoints();
2166
2167 _casterEph = new bncEphUploadCaster();
2168}
2169
2170// Retrieve Data
2171////////////////////////////////////////////////////////////////////////////
2172void bncWindow::slotStop() {
2173 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2174 QMessageBox::Yes, QMessageBox::No,
2175 QMessageBox::NoButton);
2176 if (iRet == QMessageBox::Yes) {
2177 BNC_CORE->stopPPP();
2178 BNC_CORE->stopCombination();
2179 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2180 delete _casterEph; _casterEph = 0;
2181 _runningRealTime = false;
2182 _runningPPP = false;
2183 enableStartStop();
2184 }
2185}
2186
2187// Close Application gracefully
2188////////////////////////////////////////////////////////////////////////////
2189void bncWindow::closeEvent(QCloseEvent* event) {
2190
2191 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2192 QMessageBox::Yes, QMessageBox::No,
2193 QMessageBox::Cancel);
2194
2195 if (iRet == QMessageBox::Cancel) {
2196 event->ignore();
2197 return;
2198 }
2199 else if (iRet == QMessageBox::Yes) {
2200 slotSaveOptions();
2201 }
2202
2203 BNC_CORE->stopPPP();
2204
2205 QMainWindow::closeEvent(event);
2206}
2207
2208// User changed the selection of mountPoints
2209////////////////////////////////////////////////////////////////////////////
2210void bncWindow::slotSelectionChanged() {
2211 if (_mountPointsTable->selectedItems().isEmpty()) {
2212 _actDeleteMountPoints->setEnabled(false);
2213 }
2214 else {
2215 _actDeleteMountPoints->setEnabled(true);
2216 }
2217}
2218
2219// Display Program Messages
2220////////////////////////////////////////////////////////////////////////////
2221void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2222 if (showOnScreen ) {
2223 _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2224 }
2225}
2226
2227// About Message
2228////////////////////////////////////////////////////////////////////////////
2229void bncWindow::slotAbout() {
2230 new bncAboutDlg(0);
2231}
2232
2233//Flowchart
2234////////////////////////////////////////////////////////////////////////////
2235void bncWindow::slotFlowchart() {
2236 new bncFlowchartDlg(0);
2237}
2238
2239// Help Window
2240////////////////////////////////////////////////////////////////////////////
2241void bncWindow::slotHelp() {
2242 QUrl url;
2243 url.setPath(":bnchelp.html");
2244 new bncHlpDlg(0, url);
2245}
2246
2247// Select Fonts
2248////////////////////////////////////////////////////////////////////////////
2249void bncWindow::slotFontSel() {
2250 bool ok;
2251 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2252 if (ok) {
2253 bncSettings settings;
2254 settings.setValue("font", newFont.toString());
2255 QApplication::setFont(newFont);
2256 int ww = QFontMetrics(newFont).width('w');
2257 setMinimumSize(60*ww, 80*ww);
2258 resize(60*ww, 80*ww);
2259 }
2260}
2261
2262// Whats This Help
2263void bncWindow::slotWhatsThis() {
2264 QWhatsThis::enterWhatsThisMode();
2265}
2266
2267//
2268////////////////////////////////////////////////////////////////////////////
2269void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2270 _threads = threads;
2271
2272 _bncFigure->updateMountPoints();
2273 _bncFigureLate->updateMountPoints();
2274
2275 populateMountPointsTable();
2276 bncSettings settings;
2277 _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2278 _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2279 QListIterator<bncGetThread*> iTh(threads);
2280 while (iTh.hasNext()) {
2281 bncGetThread* thread = iTh.next();
2282 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2283 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2284 "@" + _mountPointsTable->item(iRow, 1)->text() );
2285 if (url == thread->mountPoint() &&
2286 _mountPointsTable->item(iRow, 4)->text() == thread->latitude() &&
2287 _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2288 ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2289 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2290 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2291 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2292 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2293 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2294 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2295 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2296 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2297 break;
2298 }
2299 }
2300 }
2301}
2302
2303//
2304////////////////////////////////////////////////////////////////////////////
2305void bncWindow::CreateMenu() {
2306 // Create Menus
2307 // ------------
2308 _menuFile = menuBar()->addMenu(tr("&File"));
2309 _menuFile->addAction(_actFontSel);
2310 _menuFile->addSeparator();
2311 _menuFile->addAction(_actSaveOpt);
2312 _menuFile->addSeparator();
2313 _menuFile->addAction(_actQuit);
2314
2315 _menuHlp = menuBar()->addMenu(tr("&Help"));
2316 _menuHlp->addAction(_actHelp);
2317 _menuHlp->addAction(_actFlowchart);
2318 _menuHlp->addAction(_actAbout);
2319}
2320
2321// Toolbar
2322////////////////////////////////////////////////////////////////////////////
2323void bncWindow::AddToolbar() {
2324 QToolBar* toolBar = new QToolBar;
2325 addToolBar(Qt::BottomToolBarArea, toolBar);
2326 toolBar->setMovable(false);
2327 toolBar->addAction(_actAddMountPoints);
2328 toolBar->addAction(_actDeleteMountPoints);
2329 toolBar->addAction(_actMapMountPoints);
2330 toolBar->addAction(_actStart);
2331 toolBar->addAction(_actStop);
2332 toolBar->addWidget(new QLabel(" "));
2333 toolBar->addAction(_actwhatsthis);
2334}
2335
2336// About
2337////////////////////////////////////////////////////////////////////////////
2338bncAboutDlg::bncAboutDlg(QWidget* parent) :
2339 QDialog(parent) {
2340
2341 QTextBrowser* tb = new QTextBrowser;
2342 QUrl url; url.setPath(":bncabout.html");
2343 tb->setSource(url);
2344 tb->setReadOnly(true);
2345
2346 int ww = QFontMetrics(font()).width('w');
2347 QPushButton* _closeButton = new QPushButton("Close");
2348 _closeButton->setMaximumWidth(10*ww);
2349 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2350
2351 QGridLayout* dlgLayout = new QGridLayout();
2352 QLabel* img = new QLabel();
2353 img->setPixmap(QPixmap(":ntrip-logo.png"));
2354 dlgLayout->addWidget(img, 0,0);
2355 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version " BNCVERSION), 0,1);
2356 dlgLayout->addWidget(tb,1,0,1,2);
2357 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2358
2359 setLayout(dlgLayout);
2360 resize(60*ww, 60*ww);
2361 setWindowTitle("About BNC");
2362 show();
2363}
2364
2365//
2366////////////////////////////////////////////////////////////////////////////
2367bncAboutDlg::~bncAboutDlg() {
2368
2369};
2370
2371// Flowchart
2372////////////////////////////////////////////////////////////////////////////
2373bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2374 QDialog(parent) {
2375
2376 int ww = QFontMetrics(font()).width('w');
2377 QPushButton* _closeButton = new QPushButton("Close");
2378 _closeButton->setMaximumWidth(10*ww);
2379 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2380
2381 QGridLayout* dlgLayout = new QGridLayout();
2382 QLabel* img = new QLabel();
2383 img->setPixmap(QPixmap(":bncflowchart.png"));
2384 dlgLayout->addWidget(img, 0,0);
2385 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2386
2387 setLayout(dlgLayout);
2388 setWindowTitle("Flow Chart");
2389 show();
2390}
2391
2392//
2393////////////////////////////////////////////////////////////////////////////
2394bncFlowchartDlg::~bncFlowchartDlg() {
2395};
2396
2397// Enable/Disable Widget (and change its color)
2398////////////////////////////////////////////////////////////////////////////
2399void bncWindow::enableWidget(bool enable, QWidget* widget) {
2400
2401 const static QPalette paletteWhite(QColor(255, 255, 255));
2402 const static QPalette paletteGray(QColor(230, 230, 230));
2403
2404 widget->setEnabled(enable);
2405 if (enable) {
2406 widget->setPalette(paletteWhite);
2407 }
2408 else {
2409 widget->setPalette(paletteGray);
2410 }
2411}
2412
2413// Bnc Text
2414////////////////////////////////////////////////////////////////////////////
2415void bncWindow::slotBncTextChanged(){
2416
2417 const static QPalette paletteWhite(QColor(255, 255, 255));
2418 const static QPalette paletteGray(QColor(230, 230, 230));
2419
2420 bool enable = true;
2421
2422 // Proxy
2423 //------
2424 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2425 enable = !_proxyHostLineEdit->text().isEmpty();
2426 enableWidget(enable, _proxyPortLineEdit);
2427 }
2428
2429 // RINEX Observations
2430 // ------------------
2431 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2432 enable = !_rnxPathLineEdit->text().isEmpty();
2433 enableWidget(enable, _rnxIntrComboBox);
2434 enableWidget(enable, _rnxSamplSpinBox);
2435 enableWidget(enable, _rnxSkelLineEdit);
2436 enableWidget(enable, _rnxFileCheckBox);
2437 enableWidget(enable, _rnxScrpLineEdit);
2438 enableWidget(enable, _rnxV2Priority);
2439 enableWidget(enable, _rnxV3CheckBox);
2440
2441 bool enable1 = true;
2442 enable1 = _rnxV3CheckBox->isChecked();
2443 if (enable && enable1) {
2444 enableWidget(false, _rnxV2Priority);
2445 }
2446 if (enable && !enable1) {
2447 enableWidget(true, _rnxV2Priority);
2448 }
2449 }
2450
2451 // RINEX Observations, Signal Priority
2452 // -----------------------------------
2453 if (sender() == 0 || sender() == _rnxV3CheckBox) {
2454 if (!_rnxPathLineEdit->text().isEmpty()) {
2455 enableWidget(enable, _rnxIntrComboBox);
2456 enable = !_rnxV3CheckBox->isChecked();
2457 enableWidget(enable, _rnxV2Priority);
2458 }
2459 }
2460
2461 // RINEX Ephemeris
2462 // ---------------
2463 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2464 enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2465 enableWidget(enable, _ephIntrComboBox);
2466 enableWidget(enable, _ephV3CheckBox);
2467 enableWidget(enable, _ephV3filenameCheckBox);
2468 }
2469
2470 // Broadcast Corrections
2471 // ---------------------
2472 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2473 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2474 enableWidget(enable, _corrIntrComboBox);
2475 }
2476
2477 // Feed Engine
2478 // -----------
2479 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2480 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2481 enableWidget(enable, _outWaitSpinBox);
2482 enableWidget(enable, _outSamplSpinBox);
2483 }
2484
2485 // Serial Output
2486 // -------------
2487 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2488 sender() == _serialAutoNMEAComboBox) {
2489 enable = !_serialMountPointLineEdit->text().isEmpty();
2490 enableWidget(enable, _serialPortNameLineEdit);
2491 enableWidget(enable, _serialBaudRateComboBox);
2492 enableWidget(enable, _serialParityComboBox);
2493 enableWidget(enable, _serialDataBitsComboBox);
2494 enableWidget(enable, _serialStopBitsComboBox);
2495 enableWidget(enable, _serialFlowControlComboBox);
2496 enableWidget(enable, _serialAutoNMEAComboBox);
2497 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2498 enableWidget(enable2, _serialFileNMEALineEdit);
2499 bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2500 enableWidget(enable3, _serialHeightNMEALineEdit);
2501 enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2502 }
2503
2504 // Outages
2505 // -------
2506 if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2507 enable = !_adviseObsRateComboBox->currentText().isEmpty();
2508 enableWidget(enable, _adviseFailSpinBox);
2509 enableWidget(enable, _adviseRecoSpinBox);
2510 enableWidget(enable, _adviseScriptLineEdit);
2511 }
2512
2513 // Miscellaneous
2514 // -------------
2515 if (sender() == 0 || sender() == _miscMountLineEdit) {
2516 enable = !_miscMountLineEdit->text().isEmpty();
2517 enableWidget(enable, _miscIntrComboBox);
2518 enableWidget(enable, _miscScanRTCMCheckBox);
2519 enableWidget(enable, _miscPortLineEdit);
2520 }
2521
2522 // Combine Corrections
2523 // -------------------
2524 if (sender() == 0 || sender() == _cmbTable) {
2525 int iRow = _cmbTable->rowCount();
2526 if (iRow > 0) {
2527 enableWidget(true, _cmbMethodComboBox);
2528 enableWidget(true, _cmbMaxresLineEdit);
2529 enableWidget(true, _cmbSamplSpinBox);
2530 enableWidget(true, _cmbUseGlonass);
2531 }
2532 else {
2533 enableWidget(false, _cmbMethodComboBox);
2534 enableWidget(false, _cmbMaxresLineEdit);
2535 enableWidget(false, _cmbSamplSpinBox);
2536 enableWidget(false, _cmbUseGlonass);
2537 }
2538 }
2539
2540 // Upload(clk)
2541 // -----------
2542 int iRow = _uploadTable->rowCount();
2543 if (iRow > 0) {
2544 enableWidget(true, _uploadIntrComboBox);
2545 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2546 enableWidget(true, _uploadSamplClkRnxSpinBox);
2547 enableWidget(true, _uploadSamplSp3SpinBox);
2548 enableWidget(true, _uploadAntexFile);
2549 }
2550 else {
2551 enableWidget(false, _uploadIntrComboBox);
2552 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2553 enableWidget(false, _uploadSamplClkRnxSpinBox);
2554 enableWidget(false, _uploadSamplSp3SpinBox);
2555 enableWidget(false, _uploadAntexFile);
2556 }
2557
2558 // Upload(eph)
2559 // -----------
2560 iRow = _uploadEphTable->rowCount();
2561 if (iRow > 0) {
2562 enableWidget(true, _uploadSamplRtcmEphSpinBox);
2563 }
2564 else {
2565 enableWidget(false, _uploadSamplRtcmEphSpinBox);
2566 }
2567
2568 // QC
2569 // --
2570 if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2571 enable = !_reqcActionComboBox->currentText().isEmpty();
2572 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2573// bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2574 enableWidget(enable, _reqcObsFileChooser);
2575 enableWidget(enable, _reqcNavFileChooser);
2576 enableWidget(enable, _reqcOutLogLineEdit);
2577 enableWidget(enable && enable10, _reqcEditOptionButton);
2578 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2579 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2580 enableWidget(enable && !enable10, _reqcLogSummaryOnly);
2581 enableWidget(enable && !enable10, _reqcSkyPlotSignals);
2582// enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2583 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2584 }
2585
2586 // SP3 File Comparison
2587 // -------------------
2588 if (sender() == 0 || sender() == _sp3CompFileChooser) {
2589 enable = !_sp3CompFileChooser->fileName().isEmpty();
2590 enableWidget(enable, _sp3CompLogLineEdit);
2591 enableWidget(enable, _sp3CompExclude);
2592 }
2593
2594 enableStartStop();
2595}
2596
2597//
2598////////////////////////////////////////////////////////////////////////////
2599void bncWindow::slotAddCmbRow() {
2600 int iRow = _cmbTable->rowCount();
2601 _cmbTable->insertRow(iRow);
2602 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2603 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2604 }
2605}
2606
2607//
2608////////////////////////////////////////////////////////////////////////////
2609void bncWindow::slotDelCmbRow() {
2610
2611 const static QPalette paletteWhite(QColor(255, 255, 255));
2612 const static QPalette paletteGray(QColor(230, 230, 230));
2613
2614 int nRows = _cmbTable->rowCount();
2615 bool flg[nRows];
2616 for (int iRow = 0; iRow < nRows; iRow++) {
2617 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2618 flg[iRow] = true;
2619 }
2620 else {
2621 flg[iRow] = false;
2622 }
2623 }
2624 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2625 if (flg[iRow]) {
2626 _cmbTable->removeRow(iRow);
2627 }
2628 }
2629 nRows = _cmbTable->rowCount();
2630 if (nRows < 1) {
2631 enableWidget(false, _cmbMethodComboBox);
2632 enableWidget(false, _cmbMaxresLineEdit);
2633 enableWidget(false, _cmbSamplSpinBox);
2634 enableWidget(false, _cmbUseGlonass);
2635 }
2636}
2637
2638//
2639////////////////////////////////////////////////////////////////////////////
2640void bncWindow::populateCmbTable() {
2641
2642 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2643 _cmbTable->removeRow(iRow);
2644 }
2645
2646 bncSettings settings;
2647
2648 int iRow = -1;
2649 QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2650 while (it.hasNext()) {
2651 QStringList hlp = it.next().split(" ");
2652 if (hlp.size() > 2) {
2653 ++iRow;
2654 _cmbTable->insertRow(iRow);
2655 }
2656 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2657 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2658 }
2659 }
2660}
2661
2662//
2663////////////////////////////////////////////////////////////////////////////
2664void bncWindow::slotAddUploadRow() {
2665 int iRow = _uploadTable->rowCount();
2666 _uploadTable->insertRow(iRow);
2667 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2668 if (iCol == 3) {
2669 QLineEdit* passwd = new QLineEdit();
2670 passwd->setFrame(false);
2671 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2672 _uploadTable->setCellWidget(iRow, iCol, passwd);
2673 }
2674 else if (iCol == 4) {
2675 QComboBox* system = new QComboBox();
2676 system->setEditable(false);
2677 system->addItems(QString("IGS14,ETRF2000,NAD83,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2678 system->setFrame(false);
2679 _uploadTable->setCellWidget(iRow, iCol, system);
2680 }
2681 else if (iCol == 5) {
2682 QCheckBox* com = new QCheckBox();
2683 _uploadTable->setCellWidget(iRow, iCol, com);
2684 }
2685 else if (iCol == 11) {
2686 bncTableItem* bncIt = new bncTableItem();
2687 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2688 _uploadTable->setItem(iRow, iCol, bncIt);
2689 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2690 }
2691 else {
2692 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2693 }
2694 }
2695}
2696
2697//
2698////////////////////////////////////////////////////////////////////////////
2699void bncWindow::slotDelUploadRow() {
2700 BNC_CORE->_uploadTableItems.clear();
2701 int nRows = _uploadTable->rowCount();
2702 bool flg[nRows];
2703 for (int iRow = 0; iRow < nRows; iRow++) {
2704 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2705 flg[iRow] = true;
2706 }
2707 else {
2708 flg[iRow] = false;
2709 }
2710 }
2711 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2712 if (flg[iRow]) {
2713 _uploadTable->removeRow(iRow);
2714 }
2715 }
2716 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2717 BNC_CORE->_uploadTableItems[iRow] =
2718 (bncTableItem*) _uploadTable->item(iRow, 11);
2719 }
2720 nRows = _uploadTable->rowCount();
2721 if (nRows < 1) {
2722 enableWidget(false, _uploadIntrComboBox);
2723 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2724 enableWidget(false, _uploadSamplSp3SpinBox);
2725 enableWidget(false, _uploadSamplClkRnxSpinBox);
2726 enableWidget(false, _uploadAntexFile);
2727 }
2728}
2729
2730//
2731////////////////////////////////////////////////////////////////////////////
2732void bncWindow::populateUploadTable() {
2733 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2734 _uploadTable->removeRow(iRow);
2735 }
2736
2737 bncSettings settings;
2738
2739 int iRow = -1;
2740 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2741 while (it.hasNext()) {
2742 QStringList hlp = it.next().split(",");
2743 if (hlp.size() > 6) {
2744 ++iRow;
2745 _uploadTable->insertRow(iRow);
2746 }
2747 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2748 if (iCol == 3) {
2749 QLineEdit* passwd = new QLineEdit();
2750 passwd->setFrame(false);
2751 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2752 passwd->setText(hlp[iCol]);
2753 _uploadTable->setCellWidget(iRow, iCol, passwd);
2754 }
2755 else if (iCol == 4) {
2756 QComboBox* system = new QComboBox();
2757 system->setEditable(false);
2758 system->addItems(QString(",IGS14,ETRF2000,NAD83,GDA94,SIRGAS2000,DREF91,Custom").split(","));
2759 system->setFrame(false);
2760 system->setCurrentIndex(system->findText(hlp[iCol]));
2761 _uploadTable->setCellWidget(iRow, iCol, system);
2762 }
2763 else if (iCol == 5) {
2764 QCheckBox* com = new QCheckBox();
2765 if (hlp[iCol].toInt() == Qt::Checked) {
2766 com->setCheckState(Qt::Checked);
2767 }
2768 _uploadTable->setCellWidget(iRow, iCol, com);
2769 }
2770 else if (iCol == 11) {
2771 bncTableItem* bncIt = new bncTableItem();
2772 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2773 _uploadTable->setItem(iRow, iCol, bncIt);
2774 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2775 }
2776 else {
2777 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2778 }
2779 }
2780 }
2781}
2782
2783//
2784////////////////////////////////////////////////////////////////////////////
2785void bncWindow::slotSetUploadTrafo() {
2786 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2787 dlg->exec();
2788 delete dlg;
2789}
2790
2791//
2792////////////////////////////////////////////////////////////////////////////
2793void bncWindow::slotAddUploadEphRow() {
2794 int iRow = _uploadEphTable->rowCount();
2795 _uploadEphTable->insertRow(iRow);
2796 for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
2797 if (iCol == 3) {
2798 QLineEdit* passwd = new QLineEdit();
2799 passwd->setFrame(false);
2800 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2801 _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2802 }
2803 else if (iCol == 4) {
2804 QComboBox* system = new QComboBox();
2805 system->setEditable(false);
2806 system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2807 system->setFrame(false);
2808 _uploadEphTable->setCellWidget(iRow, iCol, system);
2809 }
2810 else if (iCol == 5) {
2811 bncTableItem* bncIt = new bncTableItem();
2812 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2813 _uploadEphTable->setItem(iRow, iCol, bncIt);
2814 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2815 }
2816 else {
2817 _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2818 }
2819 }
2820}
2821
2822//
2823////////////////////////////////////////////////////////////////////////////
2824void bncWindow::slotDelUploadEphRow() {
2825 BNC_CORE->_uploadTableItems.clear();
2826 int nRows = _uploadEphTable->rowCount();
2827 bool flg[nRows];
2828 for (int iRow = 0; iRow < nRows; iRow++) {
2829 if (_uploadEphTable->isItemSelected(_uploadEphTable->item(iRow,1))) {
2830 flg[iRow] = true;
2831 }
2832 else {
2833 flg[iRow] = false;
2834 }
2835 }
2836 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2837 if (flg[iRow]) {
2838 _uploadEphTable->removeRow(iRow);
2839 }
2840 }
2841 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2842 BNC_CORE->_uploadTableItems[iRow] =
2843 (bncTableItem*) _uploadEphTable->item(iRow, 5);
2844 }
2845 nRows = _uploadEphTable->rowCount();
2846 if (nRows < 1) {
2847 enableWidget(false, _uploadSamplRtcmEphSpinBox);
2848 }
2849}
2850
2851//
2852////////////////////////////////////////////////////////////////////////////
2853void bncWindow::populateUploadEphTable() {
2854 for (int iRow = _uploadEphTable->rowCount()-1; iRow >=0; iRow--) {
2855 _uploadEphTable->removeRow(iRow);
2856 }
2857
2858 bncSettings settings;
2859
2860 int iRow = -1;
2861 QListIterator<QString> it(settings.value("uploadEphMountpointsOut").toStringList());
2862 while (it.hasNext()) {
2863 QStringList hlp = it.next().split(",");
2864 if (hlp.size() > 4) {
2865 ++iRow;
2866 _uploadEphTable->insertRow(iRow);
2867 }
2868 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2869 if (iCol == 3) {
2870 QLineEdit* passwd = new QLineEdit();
2871 passwd->setFrame(false);
2872 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2873 passwd->setText(hlp[iCol]);
2874 _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2875 }
2876 else if (iCol == 4) {
2877 QComboBox* system = new QComboBox();
2878 system->setEditable(false);
2879 system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2880 system->setFrame(false);
2881 system->setCurrentIndex(system->findText(hlp[iCol]));
2882 _uploadEphTable->setCellWidget(iRow, iCol, system);
2883 }
2884 else if (iCol == 5) {
2885 bncTableItem* bncIt = new bncTableItem();
2886 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2887 _uploadEphTable->setItem(iRow, iCol, bncIt);
2888 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2889 }
2890 else {
2891 _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2892 }
2893 }
2894 }
2895}
2896
2897
2898// Progress Bar Change
2899////////////////////////////////////////////////////////////////////////////
2900void bncWindow::slotPostProcessingProgress(int nEpo) {
2901 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2902}
2903
2904// Post-Processing Reqc Finished
2905////////////////////////////////////////////////////////////////////////////
2906void bncWindow::slotPostProcessingFinished() {
2907 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2908 _runningPPP = false;
2909 _runningEdit = false;
2910 _runningQC = false;
2911 _runningSp3Comp = false;
2912 _actStart->setText(tr("Sta&rt"));
2913 enableStartStop();
2914}
2915
2916// Edit teqc-like editing options
2917////////////////////////////////////////////////////////////////////////////
2918void bncWindow::slotReqcEditOption() {
2919 saveOptions();
2920 reqcDlg* dlg = new reqcDlg(this);
2921 dlg->move(this->pos().x()+50, this->pos().y()+50);
2922 dlg->exec();
2923 delete dlg;
2924}
2925
2926// Enable/Disable Start and Stop Buttons
2927////////////////////////////////////////////////////////////////////////////
2928void bncWindow::enableStartStop() {
2929 if ( running() ) {
2930 _actStart->setEnabled(false);
2931 if (_runningRealTime || _runningPPP) {
2932 _actStop->setEnabled(true);
2933 }
2934 }
2935 else {
2936 _actStart->setEnabled(true);
2937 _actStop->setEnabled(false);
2938 }
2939}
2940
2941// Show Map
2942////////////////////////////////////////////////////////////////////////////
2943void bncWindow::slotMapMountPoints() {
2944 saveOptions();
2945 t_bncMap* bncMap = new t_bncMap(this);
2946 bncMap->setMinimumSize(800, 600);
2947 bncMap->setWindowTitle("Selected Mountpoints");
2948
2949 bncSettings settings;
2950 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2951 while (it.hasNext()) {
2952 QStringList hlp = it.next().split(" ");
2953 if (hlp.size() < 5) continue;
2954 QUrl url(hlp[0]);
2955 double latDeg = hlp[3].toDouble();
2956 double lonDeg = hlp[4].toDouble();
2957 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2958 }
2959
2960 bncMap->show();
2961}
2962
2963// Show Map
2964////////////////////////////////////////////////////////////////////////////
2965void bncWindow::slotMapPPP() {
2966#ifdef QT_WEBKIT
2967 saveOptions();
2968 enableWidget(false, _pppWidgets._mapWinButton);
2969 enableWidget(false, _pppWidgets._useGoogleMap);
2970 enableWidget(false, _pppWidgets._useOpenStreetMap);
2971 enableWidget(false, _pppWidgets._mapWinDotSize);
2972 enableWidget(false, _pppWidgets._mapWinDotColor);
2973
2974 if (!_mapWin) {
2975 _mapWin = new bncMapWin(this);
2976 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2977 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2978 _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2979 }
2980 _mapWin->show();
2981#else
2982 QMessageBox::information(this, "Information",
2983 "Qt Library compiled without QtWebKit");
2984#endif
2985}
2986
2987// Show Map
2988////////////////////////////////////////////////////////////////////////////
2989void bncWindow::slotMapPPPClosed() {
2990#ifdef QT_WEBKIT
2991 enableWidget(true, _pppWidgets._mapWinButton);
2992 enableWidget(true, _pppWidgets._useGoogleMap);
2993 enableWidget(true, _pppWidgets._useOpenStreetMap);
2994 enableWidget(true, _pppWidgets._mapWinDotSize);
2995 enableWidget(true, _pppWidgets._mapWinDotColor);
2996 if (_mapWin) {
2997 QListIterator<bncGetThread*> it(_threads);
2998 while (it.hasNext()) {
2999 bncGetThread* thread = it.next();
3000 thread->disconnect(_mapWin);
3001 }
3002 _mapWin->deleteLater();
3003 _mapWin = 0;
3004 }
3005#endif
3006}
Note: See TracBrowser for help on using the repository browser.