source: ntrip/trunk/BNC/src/bncwindow.cpp@ 6721

Last change on this file since 6721 was 6721, checked in by weber, 7 years ago

Documentation completed

File size: 132.8 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70# include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83#ifdef GNSSCENTER_PLUGIN
84 BNC_CORE->setConfFileName("");
85#endif
86
87 _caster = 0;
88 _casterEph = 0;
89
90 _bncFigure = new bncFigure(this);
91 _bncFigureLate = new bncFigureLate(this);
92 _bncFigurePPP = new bncFigurePPP(this);
93
94 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
95 _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
96
97 connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
98 connect(BNC_CORE, SIGNAL(finishedRnxPPP()), this, SLOT(slotPostProcessingFinished()));
99
100 _runningRealTime = false;
101 _runningPPP = false;
102 _runningEdit = false;
103 _runningQC = false;
104 _runningSp3Comp = false;
105 _reqcActionComboBox = 0; // necessary for enableStartStop()
106
107 _mapWin = 0;
108
109 int ww = QFontMetrics(this->font()).width('w');
110
111 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
112
113 setMinimumSize(100*ww, 70*ww);
114
115 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
116
117 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
118 this, SLOT(slotWindowMessage(QByteArray,bool)));
119
120 // Create Actions
121 // --------------
122 _actHelp = new QAction(tr("&Help Contents"),this);
123 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
124
125 _actAbout = new QAction(tr("&About BNC"),this);
126 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
127
128 _actFlowchart = new QAction(tr("&Flow Chart"),this);
129 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
130
131 _actFontSel = new QAction(tr("Select &Font"),this);
132 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
133
134 _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
135 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
136
137 _actQuit = new QAction(tr("&Quit"),this);
138 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
139
140 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
141 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
142
143 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
144 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
145 _actDeleteMountPoints->setEnabled(false);
146
147 _actMapMountPoints = new QAction(tr("&Map"),this);
148 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
149
150 _actStart = new QAction(tr("Sta&rt"),this);
151 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
152
153 _actStop = new QAction(tr("Sto&p"),this);
154 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
155
156 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
157 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
158
159 CreateMenu();
160 AddToolbar();
161
162 bncSettings settings;
163
164 // Network Options
165 // ---------------
166 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
167 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
168
169 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
170 this, SLOT(slotBncTextChanged()));
171
172 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
173 _ignoreSslErrorsCheckBox = new QCheckBox();
174 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
175 settings.value("ignoreSslErrors").toInt()));
176
177 // General Options
178 // ---------------
179 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
180 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
181 _rnxAppendCheckBox = new QCheckBox();
182 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
183 settings.value("rnxAppend").toInt()));
184 _onTheFlyComboBox = new QComboBox();
185 _onTheFlyComboBox->setEditable(false);
186 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
187 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
188 if (ii != -1) {
189 _onTheFlyComboBox->setCurrentIndex(ii);
190 }
191 _autoStartCheckBox = new QCheckBox();
192 _autoStartCheckBox->setCheckState(Qt::CheckState(
193 settings.value("autoStart").toInt()));
194
195 // RINEX Observations Options
196 // --------------------------
197 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
198 _rnxIntrComboBox = new QComboBox();
199 _rnxIntrComboBox->setEditable(false);
200 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
201 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
202 if (ii != -1) {
203 _rnxIntrComboBox->setCurrentIndex(ii);
204 }
205 _rnxSamplSpinBox = new QSpinBox();
206 _rnxSamplSpinBox->setMinimum(0);
207 _rnxSamplSpinBox->setMaximum(60);
208 _rnxSamplSpinBox->setSingleStep(5);
209 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
210 _rnxSamplSpinBox->setSuffix(" sec");
211 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
212 _rnxSkelLineEdit->setMaximumWidth(5*ww);
213 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
214 _rnxV3CheckBox = new QCheckBox();
215 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
216 QString hlp = settings.value("rnxV2Priority").toString();
217 if (hlp.isEmpty()) {
218 hlp = "CWPX_?";
219 }
220 _rnxV2Priority = new QLineEdit(hlp);
221
222 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
223 this, SLOT(slotBncTextChanged()));
224 connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
225 this, SLOT(slotBncTextChanged()));
226
227 // RINEX Ephemeris Options
228 // -----------------------
229 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
230 _ephIntrComboBox = new QComboBox();
231 _ephIntrComboBox->setEditable(false);
232 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
233 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
234 if (jj != -1) {
235 _ephIntrComboBox->setCurrentIndex(jj);
236 }
237 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
238 _ephV3CheckBox = new QCheckBox();
239 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
240
241 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
242 this, SLOT(slotBncTextChanged()));
243
244 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
245 this, SLOT(slotBncTextChanged()));
246
247 // Broadcast Corrections Options
248 // -----------------------------
249 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
250 _corrIntrComboBox = new QComboBox();
251 _corrIntrComboBox->setEditable(false);
252 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
253 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
254 if (mm != -1) {
255 _corrIntrComboBox->setCurrentIndex(mm);
256 }
257 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
258
259 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
260 this, SLOT(slotBncTextChanged()));
261
262 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
263 this, SLOT(slotBncTextChanged()));
264
265 // Feed Engine Options
266 // -------------------
267 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
268 _waitTimeSpinBox = new QSpinBox();
269 _waitTimeSpinBox->setMinimum(1);
270 _waitTimeSpinBox->setMaximum(30);
271 _waitTimeSpinBox->setSingleStep(1);
272 _waitTimeSpinBox->setSuffix(" sec");
273 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
274 _binSamplSpinBox = new QSpinBox();
275 _binSamplSpinBox->setMinimum(0);
276 _binSamplSpinBox->setMaximum(60);
277 _binSamplSpinBox->setSingleStep(5);
278 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
279 _binSamplSpinBox->setSuffix(" sec");
280 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
281 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
282
283 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
284 this, SLOT(slotBncTextChanged()));
285
286 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
287 this, SLOT(slotBncTextChanged()));
288
289 // Serial Output Options
290 // ---------------------
291 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
292 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
293 _serialBaudRateComboBox = new QComboBox();
294 _serialBaudRateComboBox->addItems(QString("110,300,600,"
295 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
296 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
297 if (kk != -1) {
298 _serialBaudRateComboBox->setCurrentIndex(kk);
299 }
300 _serialFlowControlComboBox = new QComboBox();
301 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
302 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
303 if (kk != -1) {
304 _serialFlowControlComboBox->setCurrentIndex(kk);
305 }
306 _serialDataBitsComboBox = new QComboBox();
307 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
308 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
309 if (kk != -1) {
310 _serialDataBitsComboBox->setCurrentIndex(kk);
311 }
312 _serialParityComboBox = new QComboBox();
313 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
314 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
315 if (kk != -1) {
316 _serialParityComboBox->setCurrentIndex(kk);
317 }
318 _serialStopBitsComboBox = new QComboBox();
319 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
320 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
321 if (kk != -1) {
322 _serialStopBitsComboBox->setCurrentIndex(kk);
323 }
324 _serialAutoNMEAComboBox = new QComboBox();
325 _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual").split(","));
326 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
327 if (kk != -1) {
328 _serialAutoNMEAComboBox->setCurrentIndex(kk);
329 }
330 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
331 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
332
333 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
334 this, SLOT(slotBncTextChanged()));
335
336 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
337 this, SLOT(slotBncTextChanged()));
338
339 // Outages Options
340 // ---------------
341 _obsRateComboBox = new QComboBox();
342 _obsRateComboBox->setEditable(false);
343 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
344 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
345 if (kk != -1) {
346 _obsRateComboBox->setCurrentIndex(kk);
347 }
348 _adviseFailSpinBox = new QSpinBox();
349 _adviseFailSpinBox->setMinimum(0);
350 _adviseFailSpinBox->setMaximum(60);
351 _adviseFailSpinBox->setSingleStep(1);
352 _adviseFailSpinBox->setSuffix(" min");
353 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
354 _adviseRecoSpinBox = new QSpinBox();
355 _adviseRecoSpinBox->setMinimum(0);
356 _adviseRecoSpinBox->setMaximum(60);
357 _adviseRecoSpinBox->setSingleStep(1);
358 _adviseRecoSpinBox->setSuffix(" min");
359 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
360 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
361
362 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
363 this, SLOT(slotBncTextChanged()));
364
365 // Miscellaneous Options
366 // ---------------------
367 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
368 _miscPortLineEdit = new QLineEdit(settings.value("miscPort").toString());
369 _perfIntrComboBox = new QComboBox();
370 _perfIntrComboBox->setEditable(false);
371 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
372 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
373 if (ll != -1) {
374 _perfIntrComboBox->setCurrentIndex(ll);
375 }
376 _scanRTCMCheckBox = new QCheckBox();
377 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
378 settings.value("scanRTCM").toInt()));
379
380 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
381 this, SLOT(slotBncTextChanged()));
382
383 // Streams
384 // -------
385 _mountPointsTable = new QTableWidget(0,8);
386
387 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
388 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
389 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
390 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
391 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
392 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
393 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
394 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
395 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
396 _mountPointsTable->setHorizontalHeaderLabels(labels);
397 _mountPointsTable->setGridStyle(Qt::NoPen);
398 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
399 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
400 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
401 _mountPointsTable->hideColumn(0);
402 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
403 SLOT(slotSelectionChanged()));
404 populateMountPointsTable();
405
406 _log = new QTextEdit();
407 _log->setReadOnly(true);
408 QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
409 _log->setFont(msFont);
410 _log->document()->setMaximumBlockCount(1000);
411
412 // Combine Corrections
413 // -------------------
414 _cmbTable = new QTableWidget(0,3);
415 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
416 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
417 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
418 _cmbTable->setMaximumWidth(30*ww);
419 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
420 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
421 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
422 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
423 _cmbTable->horizontalHeader()->setStretchLastSection(true);
424 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
425
426 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
427 _cmbUseGlonass = new QCheckBox();
428 _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
429
430 _cmbSamplSpinBox = new QSpinBox;
431 _cmbSamplSpinBox->setMinimum(10);
432 _cmbSamplSpinBox->setMaximum(60);
433 _cmbSamplSpinBox->setSingleStep(10);
434 _cmbSamplSpinBox->setMaximumWidth(9*ww);
435 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
436 _cmbSamplSpinBox->setSuffix(" sec");
437
438 QPushButton* addCmbRowButton = new QPushButton("Add Row");
439 QPushButton* delCmbRowButton = new QPushButton("Delete");
440
441 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
442 SLOT(slotBncTextChanged()));
443
444 _cmbMethodComboBox = new QComboBox();
445 _cmbMethodComboBox->setEditable(false);
446 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
447 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
448 if (im != -1) {
449 _cmbMethodComboBox->setCurrentIndex(im);
450 }
451
452 int iRow = _cmbTable->rowCount();
453 if (iRow > 0) {
454 enableWidget(true, _cmbMethodComboBox);
455 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
456 _cmbSamplSpinBox->setStyleSheet("background-color: white");
457 _cmbMaxresLineEdit->setEnabled(true);
458 _cmbSamplSpinBox->setEnabled(true);
459 _cmbUseGlonass->setEnabled(true);
460 }
461 else {
462 enableWidget(false, _cmbMethodComboBox);
463 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
464 _cmbSamplSpinBox->setStyleSheet("background-color: lightGray");
465 _cmbMaxresLineEdit->setEnabled(false);
466 _cmbSamplSpinBox->setEnabled(false);
467 _cmbUseGlonass->setEnabled(false);
468 }
469
470 // Upload Results
471 // -------------
472 _uploadTable = new QTableWidget(0,12);
473 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
474 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
475 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
476 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
477 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
478 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
479 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
480 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
481 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
482 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
483 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
484 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
485 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
486 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
487 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
488 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
489 _uploadTable->horizontalHeader()->setStretchLastSection(true);
490 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
491
492 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
493 SLOT(slotBncTextChanged()));
494
495 QPushButton* addUploadRowButton = new QPushButton("Add Row");
496 QPushButton* delUploadRowButton = new QPushButton("Del Row");
497 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
498 _uploadIntrComboBox = new QComboBox;
499 _uploadIntrComboBox->setEditable(false);
500 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
501 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
502 if (ii != -1) {
503 _uploadIntrComboBox->setCurrentIndex(ii);
504 }
505
506 _uploadAntexFile = new qtFileChooser(0, qtFileChooser::File);
507 _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
508
509 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
510 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
511 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
512 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
513 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
514 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
515 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
516
517 _uploadSamplSp3SpinBox = new QSpinBox;
518 _uploadSamplSp3SpinBox->setMinimum(0);
519 _uploadSamplSp3SpinBox->setMaximum(15);
520 _uploadSamplSp3SpinBox->setSingleStep(1);
521 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
522 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
523 _uploadSamplSp3SpinBox->setSuffix(" min");
524
525 _uploadSamplClkRnxSpinBox = new QSpinBox;
526 _uploadSamplClkRnxSpinBox->setMinimum(0);
527 _uploadSamplClkRnxSpinBox->setMaximum(60);
528 _uploadSamplClkRnxSpinBox->setSingleStep(5);
529 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
530 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
531 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
532
533 int iRowT = _uploadTable->rowCount();
534 if (iRowT > 0) {
535 enableWidget(true, _uploadIntrComboBox);
536 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
537 enableWidget(true, _uploadSamplSp3SpinBox);
538 enableWidget(true, _uploadSamplClkRnxSpinBox);
539 enableWidget(true, _uploadAntexFile);
540 }
541 else {
542 enableWidget(false, _uploadIntrComboBox);
543 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
544 enableWidget(false, _uploadSamplSp3SpinBox);
545 enableWidget(false, _uploadSamplClkRnxSpinBox);
546 enableWidget(false, _uploadAntexFile);
547 }
548
549 // Upload RTCM3 Ephemeris
550 // ----------------------
551 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
552 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
553 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
554 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
555 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
556 _uploadEphSampleSpinBox = new QSpinBox;
557 _uploadEphSampleSpinBox->setMinimum(5);
558 _uploadEphSampleSpinBox->setMaximum(60);
559 _uploadEphSampleSpinBox->setSingleStep(5);
560 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
561 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
562 _uploadEphSampleSpinBox->setSuffix(" sec");
563 _uploadEphBytesCounter = new bncBytesCounter;
564
565 // Canvas with Editable Fields
566 // ---------------------------
567 _canvas = new QWidget;
568 setCentralWidget(_canvas);
569
570 _aogroup = new QTabWidget();
571 _aogroup->setElideMode(Qt::ElideNone);
572 _aogroup->setUsesScrollButtons(true);
573 QWidget* pgroup = new QWidget();
574 QWidget* ggroup = new QWidget();
575 QWidget* sgroup = new QWidget();
576 QWidget* egroup = new QWidget();
577 QWidget* agroup = new QWidget();
578 QWidget* cgroup = new QWidget();
579 QWidget* ogroup = new QWidget();
580 QWidget* rgroup = new QWidget();
581 QWidget* sergroup = new QWidget();
582 QWidget* pppGroup1 = new QWidget();
583 QWidget* pppGroup2 = new QWidget();
584 QWidget* pppGroup3 = new QWidget();
585 QWidget* pppGroup4 = new QWidget();
586 QWidget* reqcgroup = new QWidget();
587 QWidget* sp3CompGroup = new QWidget();
588 QWidget* cmbgroup = new QWidget();
589 QWidget* uploadgroup = new QWidget();
590 QWidget* uploadEphgroup = new QWidget();
591 _aogroup->addTab(pgroup,tr("Network"));
592 _aogroup->addTab(ggroup,tr("General"));
593 _aogroup->addTab(ogroup,tr("RINEX Observations"));
594 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
595 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
596 _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
597 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
598 _aogroup->addTab(sgroup,tr("Feed Engine"));
599 _aogroup->addTab(sergroup,tr("Serial Output"));
600 _aogroup->addTab(agroup,tr("Outages"));
601 _aogroup->addTab(rgroup,tr("Miscellaneous"));
602 _aogroup->addTab(pppGroup1,tr("PPP (1)"));
603 _aogroup->addTab(pppGroup2,tr("PPP (2)"));
604 _aogroup->addTab(pppGroup3,tr("PPP (3)"));
605 _aogroup->addTab(pppGroup4,tr("PPP (4)"));
606
607#ifdef USE_COMBINATION
608 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
609#endif
610 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
611 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
612
613 // Log Tab
614 // -------
615 _loggroup = new QTabWidget();
616 _loggroup->addTab(_log,tr("Log"));
617 _loggroup->addTab(_bncFigure,tr("Throughput"));
618 _loggroup->addTab(_bncFigureLate,tr("Latency"));
619 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
620
621 // Netowork (Proxy and SSL) Tab
622 // ----------------------------
623 QGridLayout* pLayout = new QGridLayout;
624 pLayout->setColumnMinimumWidth(0,13*ww);
625 _proxyPortLineEdit->setMaximumWidth(9*ww);
626
627 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
628 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
629 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
630 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
631 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
632 pLayout->addWidget(new QLabel("Path to SSL certificates"), 3, 0);
633 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
634 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
635 pLayout->addWidget(new QLabel("Ignore SSL authorization errors"), 4, 0);
636 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
637 pLayout->addWidget(new QLabel(""), 5, 1);
638 pLayout->setRowStretch(6, 999);
639
640 pgroup->setLayout(pLayout);
641
642 // General Tab
643 // -----------
644 QGridLayout* gLayout = new QGridLayout;
645 gLayout->setColumnMinimumWidth(0,14*ww);
646 _onTheFlyComboBox->setMaximumWidth(9*ww);
647
648 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start.<br>"),0, 0, 1, 50);
649 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
650 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,20);
651 gLayout->addWidget(new QLabel("Append files"), 2, 0);
652 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
653 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
654 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
655 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
656 gLayout->addWidget(_autoStartCheckBox, 4, 1);
657 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
658 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,20);
659 gLayout->addWidget(new QLabel(""), 6, 1);
660 gLayout->setRowStretch(7, 999);
661
662 ggroup->setLayout(gLayout);
663
664 // RINEX Observations
665 // ------------------
666 QGridLayout* oLayout = new QGridLayout;
667 oLayout->setColumnMinimumWidth(0,14*ww);
668 _rnxIntrComboBox->setMaximumWidth(9*ww);
669//_rnxSamplSpinBox->setMaximumWidth(9*ww);
670
671 oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
672 oLayout->addWidget(new QLabel("Directory"), 1, 0);
673 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1, 15);
674 oLayout->addWidget(new QLabel("Interval"), 2, 0);
675 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
676 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
677 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
678 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
679 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, Qt::AlignLeft);
680 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
681 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1, 15);
682 oLayout->addWidget(new QLabel("Version 2"), 5, 0);
683 oLayout->addWidget(_rnxV2Priority, 5, 1, 1, 2);
684 oLayout->addWidget(new QLabel(" Signal priority"), 5, 3);
685 oLayout->addWidget(new QLabel("Version 3"), 6, 0);
686 oLayout->addWidget(_rnxV3CheckBox, 6, 1);
687 oLayout->addWidget(new QLabel(""), 7, 1);
688 oLayout->setRowStretch(8, 999);
689
690 ogroup->setLayout(oLayout);
691
692 // RINEX Ephemeris
693 // ---------------
694 QGridLayout* eLayout = new QGridLayout;
695 eLayout->setColumnMinimumWidth(0,14*ww);
696 _ephIntrComboBox->setMaximumWidth(9*ww);
697 _outEphPortLineEdit->setMaximumWidth(9*ww);
698
699 eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
700 eLayout->addWidget(new QLabel("Directory"), 1, 0);
701 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
702 eLayout->addWidget(new QLabel("Interval"), 2, 0);
703 eLayout->addWidget(_ephIntrComboBox, 2, 1);
704 eLayout->addWidget(new QLabel("Port"), 3, 0);
705 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
706 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
707 eLayout->addWidget(_ephV3CheckBox, 4, 1);
708 eLayout->setRowStretch(5, 999);
709
710 egroup->setLayout(eLayout);
711
712
713 // Broadcast Corrections
714 // ---------------------
715 QGridLayout* cLayout = new QGridLayout;
716 cLayout->setColumnMinimumWidth(0,14*ww);
717 _corrIntrComboBox->setMaximumWidth(9*ww);
718 _corrPortLineEdit->setMaximumWidth(9*ww);
719
720 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
721 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
722 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,30);
723 cLayout->addWidget(new QLabel("Interval"), 2, 0);
724 cLayout->addWidget(_corrIntrComboBox, 2, 1);
725 cLayout->addWidget(new QLabel("Port"), 3, 0);
726 cLayout->addWidget(_corrPortLineEdit, 3, 1);
727 cLayout->addWidget(new QLabel(""), 4, 1);
728 cLayout->setRowStretch(7, 999);
729 cgroup->setLayout(cLayout);
730
731 // Feed Engine
732 // -----------
733 QGridLayout* sLayout = new QGridLayout;
734 sLayout->setColumnMinimumWidth(0,14*ww);
735 _outPortLineEdit->setMaximumWidth(9*ww);
736 _waitTimeSpinBox->setMaximumWidth(9*ww);
737 _binSamplSpinBox->setMaximumWidth(9*ww);
738 _outUPortLineEdit->setMaximumWidth(9*ww);
739
740 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
741 sLayout->addWidget(new QLabel("Port"), 1, 0);
742 sLayout->addWidget(_outPortLineEdit, 1, 1);
743 sLayout->addWidget(new QLabel(" Wait for full obs epoch"), 1, 2, Qt::AlignRight);
744 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
745 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
746 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
747 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
748 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 10);
749 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
750 sLayout->addWidget(_outUPortLineEdit, 4, 1);
751 sLayout->addWidget(new QLabel(""), 5, 1);
752 sLayout->setRowStretch(6, 999);
753
754 sgroup->setLayout(sLayout);
755
756 // Serial Output
757 // -------------
758 QGridLayout* serLayout = new QGridLayout;
759 serLayout->setColumnMinimumWidth(0,14*ww);
760 _serialBaudRateComboBox->setMaximumWidth(9*ww);
761 _serialFlowControlComboBox->setMaximumWidth(11*ww);
762 _serialDataBitsComboBox->setMaximumWidth(5*ww);
763 _serialParityComboBox->setMaximumWidth(9*ww);
764 _serialStopBitsComboBox->setMaximumWidth(5*ww);
765 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
766 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
767
768 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
769 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
770 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
771 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
772 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
773 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
774 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
775 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
776 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
777 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
778 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
779 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
780 serLayout->addWidget(_serialParityComboBox, 4, 3);
781 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
782 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
783 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
784 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
785 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
786 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,10);
787 serLayout->addWidget(new QLabel("Height"), 5,14, Qt::AlignRight); // 20
788 serLayout->addWidget(_serialHeightNMEALineEdit, 5,15, 1,11);
789 serLayout->addWidget(new QLabel(""), 6, 1);
790 serLayout->setRowStretch(7, 999);
791
792 sergroup->setLayout(serLayout);
793
794 // Outages
795 // -------
796 QGridLayout* aLayout = new QGridLayout;
797 aLayout->setColumnMinimumWidth(0,14*ww);
798 _obsRateComboBox->setMaximumWidth(9*ww);
799 _adviseFailSpinBox->setMaximumWidth(9*ww);
800 _adviseRecoSpinBox->setMaximumWidth(9*ww);
801
802 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
803 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
804 aLayout->addWidget(_obsRateComboBox, 1, 1);
805 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
806 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
807 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
808 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
809 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
810 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,20);
811 aLayout->addWidget(new QLabel(""), 5, 1);
812 aLayout->setRowStretch(6, 999);
813
814 agroup->setLayout(aLayout);
815
816 // Miscellaneous
817 // -------------
818 QGridLayout* rLayout = new QGridLayout;
819 rLayout->setColumnMinimumWidth(0,14*ww);
820 _perfIntrComboBox->setMaximumWidth(9*ww);
821 _miscPortLineEdit->setMaximumWidth(9*ww);
822
823 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
824 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
825 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1, 7);
826 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
827 rLayout->addWidget(_perfIntrComboBox, 2, 1);
828 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
829 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
830 rLayout->addWidget(new QLabel("Port"), 4, 0);
831 rLayout->addWidget(_miscPortLineEdit, 4, 1);
832 rLayout->addWidget(new QLabel(""), 5, 1);
833 rLayout->setRowStretch(6, 999);
834
835 rgroup->setLayout(rLayout);
836
837 // PPP
838 // ---
839 _pppWidgets._nmeaPort->setMaximumWidth(8*ww);
840 _pppWidgets._dataSource->setMaximumWidth(20*ww);
841 _pppWidgets._corrMount->setMaximumWidth(20*ww);
842
843 QGridLayout* pppLayout1 = new QGridLayout();
844 int ir = 0;
845 pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
846 ++ir;
847 pppLayout1->addWidget(new QLabel("Data source"), ir, 0);
848 pppLayout1->addWidget(_pppWidgets._dataSource, ir, 1);
849//pppLayout1->addItem(new QSpacerItem(4*ww, 0), ir, 2);
850 pppLayout1->addWidget(new QLabel(" RINEX Obs file(s)"), ir, 3);
851 pppLayout1->addWidget(_pppWidgets._rinexObs, ir, 4);
852 ++ir;
853 pppLayout1->addWidget(new QLabel(" RINEX Nav file(s)"), ir, 3);
854 pppLayout1->addWidget(_pppWidgets._rinexNav, ir, 4);
855 ++ir;
856 pppLayout1->addWidget(new QLabel("Corrections"), ir, 0);
857 pppLayout1->addWidget(_pppWidgets._corrMount, ir, 1);
858 pppLayout1->addWidget(new QLabel(" Corrections"), ir, 3);
859 pppLayout1->addWidget(_pppWidgets._corrFile, ir, 4);
860 ++ir;
861 pppLayout1->addWidget(new QLabel("Coordinates"), ir, 0);
862 pppLayout1->addWidget(_pppWidgets._crdFile, ir, 1);
863 pppLayout1->addWidget(new QLabel(" Logfile"), ir, 3);
864 pppLayout1->addWidget(_pppWidgets._logFile, ir, 4);
865 ++ir;
866 pppLayout1->addWidget(new QLabel("ANTEX file"), ir, 0);
867 pppLayout1->addWidget(_pppWidgets._antexFile, ir, 1);
868
869 pppLayout1->addWidget(new QLabel(" NMEA file"), ir, 3);
870 pppLayout1->addWidget(_pppWidgets._nmeaFile, ir, 4);
871 pppLayout1->addWidget(new QLabel(" Port"), ir, 5);
872 pppLayout1->addWidget(_pppWidgets._nmeaPort, ir, 6);
873 ++ir;
874 pppLayout1->addWidget(new QLabel(" SNX TRO file"), ir, 3);
875 pppLayout1->addWidget(_pppWidgets._snxtroFile, ir, 4);
876 pppLayout1->addWidget(new QLabel(" Sampling"), ir, 5);
877 pppLayout1->addWidget(_pppWidgets._snxtroSampl, ir, 6);
878 ++ir;
879 pppLayout1->setRowStretch(ir, 999);
880
881 pppGroup1->setLayout(pppLayout1);
882
883
884 _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull an RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from NTRIP broadcaster www.igs-ip.net.</li><li>Post processing PPP requires RINEX observation files, RINEX navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
885
886 _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p>"));
887
888 _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. The 'Coordinates' file must contain one record per station with the following parameters separated by blank characters:<p><ul><li>Either<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode) or</li><li>the first four characters of the RINEX observations file (when in post processing PPP mode).</li></ul>This parameter is mandatory. BNC will carry out PPP solutions only for those stations which are listed here.</li><li>Approximate X,Y,Z coordinate components of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>Nort, East and Up component of antenna excentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
889
890 _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
891
892 _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX observations file(s).</p>"));
893
894 _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX navigation file(s).</p>"));
895
896 _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file(s) as saved beforehand using BNC.</p>"));
897
898 _pppWidgets._logFile->setWhatsThis(tr("<p>Specify the path to daily PPP logfiles using e.g. the following syntax (example):</p><p> ./PPP_$(STATION)_$(DATE).log</p><p>BNC will produce one daily PPP logfile per station. Variable $(STATION) stands for the affected station and $(DATE) stands for the date.</p>"));
899
900 _pppWidgets._nmeaFile->setWhatsThis(tr("<p>Specify the path to daily NMEA files using e.g. the following syntax (example):</p><p> ./PPP_$(STATION)_$(DATE).nmea</p><p>BNC will produce one daily NMEA file per station, mainly to save NMEA GGA sentences from the PPP solution. Variable $(STATION) stands for the affected station and $(DATE) stands for the date.</p>"));
901
902 _pppWidgets._nmeaPort->setWhatsThis(tr("<p> </p>"));
903
904 _pppWidgets._snxtroFile->setWhatsThis(tr("<p>Specify the path to daily SINEX Troposphere files using e.g. the following syntax (example):</p><p> ./PPP_$(STATION)_$(DATE).tro</p><p>BNC will produce one daily troposphere file per station to save troposphere parameters from the PPP solution in SINEX Troposphere format. Variable $(STATION) stands for the affected station and $(DATE) stands for the date.</p>"));
905
906 _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere paramers.</p>"));
907
908 QVBoxLayout* pppLayout2 = new QVBoxLayout();
909 pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
910 pppLayout2->addWidget(_pppWidgets._staTable, 99);
911 QHBoxLayout* pppLayout2sub = new QHBoxLayout();
912 pppLayout2sub->addWidget(_pppWidgets._addStaButton);
913 pppLayout2sub->addWidget(_pppWidgets._delStaButton);
914 pppLayout2sub->addStretch(99);
915
916 pppLayout2->addLayout(pppLayout2sub);
917
918 pppGroup2->setLayout(pppLayout2);
919
920 QGridLayout* pppLayout3 = new QGridLayout();
921 ir = 0;
922 pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
923 ++ir;
924 pppLayout3->addWidget(new QLabel("GPS LCs"), ir, 0, Qt::AlignLeft);
925 pppLayout3->addWidget(_pppWidgets._lcGPS, ir, 1);
926 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 2);
927 pppLayout3->addWidget(new QLabel("Sigma C1"), ir, 3, Qt::AlignLeft);
928 pppLayout3->addWidget(_pppWidgets._sigmaC1, ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
929 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 5);
930 pppLayout3->addWidget(new QLabel("Sigma L1"), ir, 6, Qt::AlignLeft);
931 pppLayout3->addWidget(_pppWidgets._sigmaL1, ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
932 ++ir;
933 pppLayout3->addWidget(new QLabel("GLONASS LCs"), ir, 0, Qt::AlignLeft);
934 pppLayout3->addWidget(_pppWidgets._lcGLONASS, ir, 1);
935 pppLayout3->addWidget(new QLabel("Max Res C1"), ir, 3, Qt::AlignLeft);
936 pppLayout3->addWidget(_pppWidgets._maxResC1, ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
937 pppLayout3->addWidget(new QLabel("Max Res L1"), ir, 6, Qt::AlignLeft);
938 pppLayout3->addWidget(_pppWidgets._maxResL1, ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
939 ++ir;
940 pppLayout3->addWidget(new QLabel("Galileo LCs"), ir, 0, Qt::AlignLeft);
941 pppLayout3->addWidget(_pppWidgets._lcGalileo, ir, 1);
942 pppLayout3->addWidget(new QLabel("Ele Wgt Code"), ir, 3, Qt::AlignLeft);
943 pppLayout3->addWidget(_pppWidgets._eleWgtCode, ir, 4);
944 pppLayout3->addWidget(new QLabel("Ele Wgt Phase"), ir, 6, Qt::AlignLeft);
945 pppLayout3->addWidget(_pppWidgets._eleWgtPhase, ir, 7);
946 ++ir;
947 pppLayout3->addWidget(new QLabel("Wait for corrections"), ir, 0, Qt::AlignLeft);
948 pppLayout3->addWidget(_pppWidgets._corrWaitTime, ir, 1);
949 pppLayout3->addWidget(new QLabel("Min # of Obs"), ir, 3, Qt::AlignLeft);
950 pppLayout3->addWidget(_pppWidgets._minObs, ir, 4);
951 pppLayout3->addWidget(new QLabel("Min Elevation"), ir, 6, Qt::AlignLeft);
952 pppLayout3->addWidget(_pppWidgets._minEle, ir, 7);
953 ++ir;
954 pppLayout3->addWidget(new QLabel("Seeding (sec)"), ir, 0, Qt::AlignLeft);
955 pppLayout3->addWidget(_pppWidgets._seedingTime, ir, 1);
956 ++ir;
957 pppLayout3->addWidget(new QLabel(""), ir, 8);
958 pppLayout3->setColumnStretch(8, 999);
959 ++ir;
960 pppLayout3->addWidget(new QLabel(""), ir, 1);
961 pppLayout3->setRowStretch(ir, 999);
962
963 pppGroup3->setLayout(pppLayout3);
964
965 // ------------------------
966 connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
967 _pppWidgets._mapSpeedSlider->setMinimumWidth(28*ww);
968
969 QGridLayout* pppLayout4 = new QGridLayout();
970 ir = 0;
971 pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
972 ++ir;
973 pppLayout4->addWidget(new QLabel("PPP Plot"), ir, 0, Qt::AlignLeft);
974 pppLayout4->addWidget(_pppWidgets._plotCoordinates, ir, 1, Qt::AlignLeft);
975 pppLayout4->addWidget(new QLabel("Mountpoint"), ir, 2, 1, 10, Qt::AlignLeft);
976 ++ir;
977 pppLayout4->addWidget(new QLabel("Track map"), ir, 0, Qt::AlignLeft);
978 pppLayout4->addWidget(_pppWidgets._mapWinButton, ir, 1, Qt::AlignLeft);
979 pppLayout4->addWidget(new QLabel("OSM"), ir, 2, Qt::AlignLeft);
980 pppLayout4->addWidget(_pppWidgets._useOpenStreetMap, ir, 3, Qt::AlignLeft);
981 pppLayout4->addWidget(new QLabel("Google"), ir, 3, Qt::AlignRight);
982 pppLayout4->addWidget(_pppWidgets._useGoogleMap, ir, 4, Qt::AlignLeft);
983 ++ir;
984 pppLayout4->addWidget(new QLabel("Dot-properties"), ir, 0, Qt::AlignLeft);
985 pppLayout4->addWidget(_pppWidgets._mapWinDotSize, ir, 1, Qt::AlignLeft);
986 pppLayout4->addWidget(new QLabel("Size "), ir, 2, Qt::AlignLeft);
987 pppLayout4->addWidget(_pppWidgets._mapWinDotColor, ir, 3, Qt::AlignLeft);
988 pppLayout4->addWidget(new QLabel("Color"), ir, 4, Qt::AlignLeft);
989 ++ir;
990 pppLayout4->addWidget(new QLabel("Post-processing speed"), ir, 0, Qt::AlignLeft);
991 pppLayout4->addWidget(_pppWidgets._mapSpeedSlider, ir, 1, 1, 20, Qt::AlignLeft);
992 ++ir;
993 pppLayout4->addWidget(new QLabel(""), ir, 1);
994 pppLayout4->setRowStretch(ir, 999);
995
996 pppGroup4->setLayout(pppLayout4);
997
998 // Reqc Processing
999 // ---------------
1000 _reqcActionComboBox = new QComboBox();
1001 _reqcActionComboBox->setEditable(false);
1002 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1003 int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1004 if (ik != -1) {
1005 _reqcActionComboBox->setCurrentIndex(ik);
1006 }
1007 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1008 this, SLOT(slotBncTextChanged()));
1009
1010 QGridLayout* reqcLayout = new QGridLayout;
1011 _reqcActionComboBox->setMinimumWidth(15*ww);
1012 _reqcActionComboBox->setMaximumWidth(20*ww);
1013
1014 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1015 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1016 _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to an input observation file in RINEX v2 or v3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1017
1018 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1019 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1020 _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to an input navigation file in RINEX v2 or v3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1021
1022 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1023 _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX observation output file.</p><p>Default is an empty option field, meaning that no RINEX observation output file will be produced.</p>"));
1024
1025 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1026 _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX navigation output file.</p><p>Default is an empty option field, meaning that no RINEX navigation output file will be produced.</p>"));
1027
1028 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1029 _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1030
1031 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1032 _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1033
1034 _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1035 _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify the observation signals to be used for that. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for fequency and tracking mode or channel must be seperated by ampersand character '&'. Specifications for each navigation systems must be seperated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is an empty option field, meaning that BNC will not produces.</p>"));
1036
1037 connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1038 this, SLOT(slotBncTextChanged()));
1039
1040 _reqcLogSummaryOnly = new QCheckBox();
1041 _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1042 _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile contents to a small summary.</p><p>Tick 'Summary only' to suppress a full logfile output and produce a logfile containing only summary information.</p>"));
1043
1044 ir = 0;
1045 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1046 ++ir;
1047 reqcLayout->addWidget(new QLabel("Action"), ir, 0);
1048 reqcLayout->addWidget(_reqcActionComboBox, ir, 1);
1049 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1050 _reqcEditOptionButton->setMinimumWidth(15*ww);
1051 _reqcEditOptionButton->setMaximumWidth(20*ww);
1052
1053 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3);
1054 ++ir;
1055 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0);
1056 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1);
1057 _reqcObsFileChooser->setMaximumWidth(40*ww);
1058 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1059 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3);
1060 _reqcNavFileChooser->setMaximumWidth(40*ww);
1061 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1062 ++ir;
1063 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0);
1064 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1);
1065 _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1066 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1067 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3);
1068 _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1069 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1070 ++ir;
1071 reqcLayout->addWidget(new QLabel("Logfile"), ir, 0);
1072 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1);
1073 _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1074 reqcLayout->addWidget(new QLabel(" Summary only"), ir, 2);
1075 reqcLayout->addWidget(_reqcLogSummaryOnly, ir, 3);
1076 ++ir;
1077 reqcLayout->addWidget(new QLabel("Plots for signals"), ir, 0);
1078 reqcLayout->addWidget(_reqcSkyPlotSignals, ir, 1);
1079 _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1080 ++ir;
1081 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0);
1082 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1);
1083 _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1084 ++ir;
1085 reqcLayout->setRowStretch(ir, 999);
1086
1087 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1088 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1089
1090 reqcgroup->setLayout(reqcLayout);
1091
1092 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1093 this, SLOT(slotReqcEditOption()));
1094
1095 QGridLayout* sp3CompLayout = new QGridLayout;
1096
1097 _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1098 _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1099 _sp3CompFileChooser->setWhatsThis(tr("Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma."));
1100 _sp3CompFileChooser->setMinimumWidth(15*ww);
1101 _sp3CompFileChooser->setMaximumWidth(40*ww);
1102
1103 _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1104 _sp3CompExclude->setMinimumWidth(15*ww);
1105 _sp3CompExclude->setMaximumWidth(15*ww);
1106 _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparision. Example:<p>G04,G31,R</p><p>This excludes GPS satellites RPN 4 and 31 as well as all GLONASS satellites from the comparision.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1107
1108 _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1109 _sp3CompLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1110 _sp3CompLogLineEdit->setMinimumWidth(15*ww);
1111 _sp3CompLogLineEdit->setMaximumWidth(15*ww);
1112
1113 ir = 0;
1114 sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"), ir, 0, 1, 40);
1115 ++ir;
1116 sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"), ir, 0, Qt::AlignLeft);
1117 sp3CompLayout->addWidget(_sp3CompFileChooser, ir, 1, 1, 20);
1118 ++ir;
1119 sp3CompLayout->addWidget(new QLabel("Exclude satellites"), ir, 0, Qt::AlignLeft);
1120 sp3CompLayout->addWidget(_sp3CompExclude, ir, 1, Qt::AlignRight);
1121 ++ir;
1122 sp3CompLayout->addWidget(new QLabel("Logfile"), ir, 0, Qt::AlignLeft);
1123 sp3CompLayout->addWidget(_sp3CompLogLineEdit, ir, 1, Qt::AlignRight);
1124 ++ir;
1125 sp3CompLayout->addWidget(new QLabel(""), ir, 1);
1126 ++ir;
1127 sp3CompLayout->setRowStretch(ir, 999);
1128
1129 sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1130 sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1131
1132 sp3CompGroup->setLayout(sp3CompLayout);
1133
1134 connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1135 this, SLOT(slotBncTextChanged()));
1136
1137 // Combine Corrections
1138 // -------------------
1139 QGridLayout* cmbLayout = new QGridLayout;
1140
1141 populateCmbTable();
1142 cmbLayout->addWidget(_cmbTable, 0, 0, 8, 3);
1143 cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1144 cmbLayout->addWidget(addCmbRowButton, 2, 6);
1145 cmbLayout->addWidget(delCmbRowButton, 2, 7);
1146 cmbLayout->addWidget(new QLabel("Method"), 3, 6, Qt::AlignRight);
1147 cmbLayout->addWidget(_cmbMethodComboBox, 3, 7);
1148 cmbLayout->addWidget(new QLabel(" Maximal residuum"), 4, 6, Qt::AlignRight);
1149 cmbLayout->addWidget(_cmbMaxresLineEdit, 4, 7, Qt::AlignRight);
1150 cmbLayout->addWidget(new QLabel("Sampling"), 5, 6, Qt::AlignRight);
1151 cmbLayout->addWidget(_cmbSamplSpinBox, 5, 7);
1152 cmbLayout->addWidget(new QLabel(" Use GLONASS"), 6, 6, Qt::AlignRight);
1153 cmbLayout->addWidget(_cmbUseGlonass, 6, 7);
1154 cmbLayout->setRowStretch(7, 999);
1155
1156 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1157 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1158
1159 cmbgroup->setLayout(cmbLayout);
1160
1161 // Upload Layout (Clocks)
1162 // ----------------------
1163 QGridLayout* uploadHlpLayout = new QGridLayout();
1164
1165 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1166 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1167 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1168
1169 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1170 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1171 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1172 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1173 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1174 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1175 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1176 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1177 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1178 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1179 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1180 uploadHlpLayout->addWidget(new QLabel("ANTEX file"), 1, 0, Qt::AlignLeft);
1181 uploadHlpLayout->addWidget(_uploadAntexFile, 1, 1, 1, 4);
1182
1183 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1184 populateUploadTable();
1185
1186 uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1187 uploadLayout->addWidget(_uploadTable);
1188 uploadLayout->addLayout(uploadHlpLayout);
1189
1190 uploadgroup->setLayout(uploadLayout);
1191
1192 // Upload Layout (Ephemeris)
1193 // -------------------------
1194 QGridLayout* uploadLayoutEph = new QGridLayout;
1195
1196 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1197 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1198 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1199 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1200
1201 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1202 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1203 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1204 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1205 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1206 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1207 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1208 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1209 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1210 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1211 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1212 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1213 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1214 uploadLayoutEph->setRowStretch(5, 999);
1215
1216 uploadEphgroup->setLayout(uploadLayoutEph);
1217
1218 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1219 this, SLOT(slotBncTextChanged()));
1220
1221 // Main Layout
1222 // -----------
1223 QGridLayout* mLayout = new QGridLayout;
1224 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1225 mLayout->addWidget(_aogroup, 0,0);
1226 mLayout->addWidget(_mountPointsTable, 1,0);
1227 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1228 mLayout->addWidget(_loggroup, 2,0);
1229
1230 _canvas->setLayout(mLayout);
1231
1232 // WhatsThis
1233 // ---------
1234 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1235 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1236 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1237 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1238 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1239 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1240 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1241 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1242 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1243 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1244 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1245 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1246 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1247 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1248 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1249 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1250 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1251 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1252 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1253 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1254 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1255 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1256 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1257 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1258 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1259 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1260 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1261 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1262 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1263 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1264 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster together with an approximation for the height. The default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1265 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1266 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1267 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1268 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1269 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1270 _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Default is priority list 'CWPX_?'.</p>"));
1271 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1272 _miscPortLineEdit->setWhatsThis(tr("BNC can output an incoming stream through a TCP/IP port of your local host. Specify a port number here to activate this function."));
1273 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1274 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream contents the receiver may use it for Differential GNSS, Precise Point Positioning or any other purpose supported by the firmware.</p>"));
1275 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1276 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1277 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1278 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1279 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1280 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1281 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtural Reference Station' (VRS) concept which requires the receiver to send approximate position information to the NTRIP Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the NTRIP broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GPGGA or GNGGA from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' if you want BNC to produce and upload one initial GPGGA NMEA message to the NTRIP broadcaster because your serial connected receiver doesn't generate these messages.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'ntrip' stream attribute set to 'yes'. This attribute is either extracted from the NTRIP broadcaster's sourcetable or introduced by the user through editing the BNC configuration file.</p>"));
1282 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1283 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced through 'Mountpoint'. Together with the latitude and longitude from the NTRIP broadcaster sourcetable the height information is used to build one initial GPGGA message to be sent to the NTRIP broadcaster.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual'.</p>"));
1284 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX v2 or v3 files or to perform a quality check and 'Analyze' the data following UNAVCO's famous 'teqc' program.</p>"));
1285 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1286 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1287 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.</p><p>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1288 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1289 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval for the Clocks. The clock corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1290 _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination."));
1291 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1292 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>When saving SP3 file contents and/or referring correctors to the satellite's Center of Mass (CoM), an offset has to be applied because correctors originally refer to the satellite's Antenna Phase Center (APC). Antenna offsets are available from the IGS 'ANTEX file' which can be introduced through specifying its path. If you don't specify an 'ANTEX file' path, the SP3 file contents and the orbit and clock correctors will be referred to satellite APCs and not to CoM.</p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1293
1294 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1295 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1296 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1297 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1298 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1299 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1300 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1301 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1302 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1303 _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead of Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify the 'ANTEX file' path if you want to save the stream contents in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file contents as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1304 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1305 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1306 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1307 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1308 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1309 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1310 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1311 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1312 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1313 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1314 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1315
1316 // Enable/Disable all Widgets
1317 // --------------------------
1318 slotBncTextChanged();
1319 enableStartStop();
1320
1321 // Auto start
1322 // ----------
1323 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1324 slotStart();
1325 }
1326}
1327
1328// Destructor
1329////////////////////////////////////////////////////////////////////////////
1330bncWindow::~bncWindow() {
1331 delete _caster; BNC_CORE->setCaster(0);
1332 delete _casterEph;
1333}
1334
1335//
1336////////////////////////////////////////////////////////////////////////////
1337void bncWindow::populateMountPointsTable() {
1338
1339 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1340 _mountPointsTable->removeRow(iRow);
1341 }
1342
1343 bncSettings settings;
1344
1345 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1346 int iRow = 0;
1347 while (it.hasNext()) {
1348 QStringList hlp = it.next().split(" ");
1349 if (hlp.size() < 5) continue;
1350 _mountPointsTable->insertRow(iRow);
1351
1352 QUrl url(hlp[0]);
1353
1354 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1355 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1356 QString nmea(hlp[4]);
1357 if (hlp[5] == "S") {
1358 fullPath = hlp[0].replace(0,2,"");
1359 }
1360 QString ntripVersion = "2";
1361 if (hlp.size() >= 6) {
1362 ntripVersion = (hlp[5]);
1363 }
1364
1365 QTableWidgetItem* it;
1366 it = new QTableWidgetItem(url.userInfo());
1367 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1368 _mountPointsTable->setItem(iRow, 0, it);
1369
1370 it = new QTableWidgetItem(fullPath);
1371 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1372 _mountPointsTable->setItem(iRow, 1, it);
1373
1374 it = new QTableWidgetItem(format);
1375 _mountPointsTable->setItem(iRow, 2, it);
1376
1377 if (nmea == "yes") {
1378 it = new QTableWidgetItem(latitude);
1379 _mountPointsTable->setItem(iRow, 3, it);
1380 it = new QTableWidgetItem(longitude);
1381 _mountPointsTable->setItem(iRow, 4, it);
1382 } else {
1383 it = new QTableWidgetItem(latitude);
1384 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1385 _mountPointsTable->setItem(iRow, 3, it);
1386 it = new QTableWidgetItem(longitude);
1387 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1388 _mountPointsTable->setItem(iRow, 4, it);
1389 }
1390
1391 it = new QTableWidgetItem(nmea);
1392 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1393 _mountPointsTable->setItem(iRow, 5, it);
1394
1395 it = new QTableWidgetItem(ntripVersion);
1396 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1397 _mountPointsTable->setItem(iRow, 6, it);
1398
1399 bncTableItem* bncIt = new bncTableItem();
1400 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1401 _mountPointsTable->setItem(iRow, 7, bncIt);
1402
1403 iRow++;
1404 }
1405
1406 _mountPointsTable->sortItems(1);
1407
1408 enableStartStop();
1409}
1410
1411// Retrieve Table
1412////////////////////////////////////////////////////////////////////////////
1413void bncWindow::slotAddMountPoints() {
1414
1415 bncSettings settings;
1416 QString proxyHost = settings.value("proxyHost").toString();
1417 int proxyPort = settings.value("proxyPort").toInt();
1418 if (proxyHost != _proxyHostLineEdit->text() ||
1419 proxyPort != _proxyPortLineEdit->text().toInt()) {
1420 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1421 "changed. Use the new ones?",
1422 QMessageBox::Yes, QMessageBox::No,
1423 QMessageBox::NoButton);
1424 if (iRet == QMessageBox::Yes) {
1425 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1426 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1427 }
1428 }
1429
1430 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1431 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1432
1433 QMessageBox msgBox;
1434 msgBox.setIcon(QMessageBox::Question);
1435 msgBox.setWindowTitle("Add Stream");
1436 msgBox.setText("Add stream(s) coming from:");
1437
1438 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1439 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1440 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1441 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1442 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1443
1444 msgBox.exec();
1445
1446 if (msgBox.clickedButton() == buttonNtrip) {
1447 bncTableDlg* dlg = new bncTableDlg(this);
1448 dlg->move(this->pos().x()+50, this->pos().y()+50);
1449 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1450 this, SLOT(slotNewMountPoints(QStringList*)));
1451 dlg->exec();
1452 delete dlg;
1453 } else if (msgBox.clickedButton() == buttonIP) {
1454 bncIpPort* ipp = new bncIpPort(this);
1455 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1456 this, SLOT(slotNewMountPoints(QStringList*)));
1457 ipp->exec();
1458 delete ipp;
1459 } else if (msgBox.clickedButton() == buttonUDP) {
1460 bncUdpPort* udp = new bncUdpPort(this);
1461 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1462 this, SLOT(slotNewMountPoints(QStringList*)));
1463 udp->exec();
1464 delete udp;
1465 } else if (msgBox.clickedButton() == buttonSerial) {
1466 bncSerialPort* sep = new bncSerialPort(this);
1467 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1468 this, SLOT(slotNewMountPoints(QStringList*)));
1469 sep->exec();
1470 delete sep;
1471 } else if (msgBox.clickedButton() == buttonCancel) {
1472 // Cancel
1473 }
1474
1475 enableStartStop();
1476}
1477
1478// Delete Selected Mount Points
1479////////////////////////////////////////////////////////////////////////////
1480void bncWindow::slotDeleteMountPoints() {
1481
1482 int nRows = _mountPointsTable->rowCount();
1483 bool flg[nRows];
1484 for (int iRow = 0; iRow < nRows; iRow++) {
1485 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1486 flg[iRow] = true;
1487 }
1488 else {
1489 flg[iRow] = false;
1490 }
1491 }
1492 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1493 if (flg[iRow]) {
1494 _mountPointsTable->removeRow(iRow);
1495 }
1496 }
1497 _actDeleteMountPoints->setEnabled(false);
1498
1499 enableStartStop();
1500}
1501
1502// New Mount Points Selected
1503////////////////////////////////////////////////////////////////////////////
1504void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1505 int iRow = 0;
1506 QListIterator<QString> it(*mountPoints);
1507 while (it.hasNext()) {
1508 QStringList hlp = it.next().split(" ");
1509 QUrl url(hlp[0]);
1510 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1511 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1512 QString nmea(hlp[4]);
1513 if (hlp[5] == "S") {
1514 fullPath = hlp[0].replace(0,2,"");
1515 }
1516 QString ntripVersion = "2";
1517 if (hlp.size() >= 6) {
1518 ntripVersion = (hlp[5]);
1519 }
1520
1521 _mountPointsTable->insertRow(iRow);
1522
1523 QTableWidgetItem* it;
1524 it = new QTableWidgetItem(url.userInfo());
1525 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1526 _mountPointsTable->setItem(iRow, 0, it);
1527
1528 it = new QTableWidgetItem(fullPath);
1529 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1530 _mountPointsTable->setItem(iRow, 1, it);
1531
1532 it = new QTableWidgetItem(format);
1533 _mountPointsTable->setItem(iRow, 2, it);
1534
1535 if (nmea == "yes") {
1536 it = new QTableWidgetItem(latitude);
1537 _mountPointsTable->setItem(iRow, 3, it);
1538 it = new QTableWidgetItem(longitude);
1539 _mountPointsTable->setItem(iRow, 4, it);
1540 } else {
1541 it = new QTableWidgetItem(latitude);
1542 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1543 _mountPointsTable->setItem(iRow, 3, it);
1544 it = new QTableWidgetItem(longitude);
1545 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1546 _mountPointsTable->setItem(iRow, 4, it);
1547 }
1548
1549 it = new QTableWidgetItem(nmea);
1550 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1551 _mountPointsTable->setItem(iRow, 5, it);
1552
1553 it = new QTableWidgetItem(ntripVersion);
1554 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1555 _mountPointsTable->setItem(iRow, 6, it);
1556
1557 bncTableItem* bncIt = new bncTableItem();
1558 _mountPointsTable->setItem(iRow, 7, bncIt);
1559
1560 iRow++;
1561 }
1562 _mountPointsTable->hideColumn(0);
1563 _mountPointsTable->sortItems(1);
1564 delete mountPoints;
1565
1566 enableStartStop();
1567}
1568
1569// Save Options (serialize)
1570////////////////////////////////////////////////////////////////////////////
1571void bncWindow::slotSaveOptions() {
1572 saveOptions();
1573 bncSettings settings;
1574 settings.sync();
1575}
1576
1577// Save Options (memory only)
1578////////////////////////////////////////////////////////////////////////////
1579void bncWindow::saveOptions() {
1580
1581 QStringList mountPoints;
1582 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1583
1584 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1585 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1586 "@" + _mountPointsTable->item(iRow, 1)->text() );
1587
1588 mountPoints.append(url.toString() + " " +
1589 _mountPointsTable->item(iRow, 2)->text()
1590 + " " + _mountPointsTable->item(iRow, 3)->text()
1591 + " " + _mountPointsTable->item(iRow, 4)->text()
1592 + " " + _mountPointsTable->item(iRow, 5)->text()
1593 + " " + _mountPointsTable->item(iRow, 6)->text());
1594 } else {
1595 mountPoints.append(
1596 "//" + _mountPointsTable->item(iRow, 1)->text()
1597 + " " + _mountPointsTable->item(iRow, 2)->text()
1598 + " " + _mountPointsTable->item(iRow, 3)->text()
1599 + " " + _mountPointsTable->item(iRow, 4)->text()
1600 + " " + _mountPointsTable->item(iRow, 5)->text()
1601 + " " + _mountPointsTable->item(iRow, 6)->text());
1602 }
1603 }
1604
1605 QStringList combineStreams;
1606 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1607 QString hlp;
1608 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1609 if (_cmbTable->item(iRow, iCol)) {
1610 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1611 }
1612 }
1613 if (!hlp.isEmpty()) {
1614 combineStreams << hlp;
1615 }
1616 }
1617
1618 QStringList uploadMountpointsOut;
1619 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1620 QString hlp;
1621 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1622 if (_uploadTable->cellWidget(iRow, iCol) &&
1623 (iCol == 3 || iCol == 4 || iCol == 5)) {
1624 if (iCol == 3) {
1625 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1626 hlp += passwd->text() + ",";
1627 }
1628 else if (iCol == 4) {
1629 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1630 hlp += system->currentText() + ",";
1631 }
1632 else if (iCol == 5) {
1633 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1634 QString state; state.setNum(com->checkState());
1635 hlp += state + ",";
1636 }
1637 }
1638 else if (_uploadTable->item(iRow, iCol)) {
1639 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1640 }
1641 }
1642 if (!hlp.isEmpty()) {
1643 uploadMountpointsOut << hlp;
1644 }
1645 }
1646
1647 bncSettings settings;
1648
1649 settings.setValue("startTab", _aogroup->currentIndex());
1650 settings.setValue("statusTab", _loggroup->currentIndex());
1651 settings.setValue("mountPoints", mountPoints);
1652// Network
1653 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1654 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1655 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1656 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1657// General
1658 settings.setValue("logFile", _logFileLineEdit->text());
1659 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1660 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1661 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1662 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1663// RINEX Observations
1664 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1665 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1666 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1667 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1668 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1669 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1670 settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1671// RINEX Ephemeris
1672 settings.setValue("ephPath", _ephPathLineEdit->text());
1673 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1674 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1675 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1676// Broadcast Corrections
1677 settings.setValue("corrPath", _corrPathLineEdit->text());
1678 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1679 settings.setValue("corrPort", _corrPortLineEdit->text());
1680// Feed Engine
1681 settings.setValue("outPort", _outPortLineEdit->text());
1682 settings.setValue("waitTime", _waitTimeSpinBox->value());
1683 settings.setValue("binSampl", _binSamplSpinBox->value());
1684 settings.setValue("outFile", _outFileLineEdit->text());
1685 settings.setValue("outUPort", _outUPortLineEdit->text());
1686// Serial Output
1687 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1688 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1689 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1690 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1691 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1692 settings.setValue("serialParity", _serialParityComboBox->currentText());
1693 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1694 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1695 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1696 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1697// Outages
1698 settings.setValue("obsRate", _obsRateComboBox->currentText());
1699 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1700 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1701 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1702// Miscellaneous
1703 settings.setValue("miscMount", _miscMountLineEdit->text());
1704 settings.setValue("miscPort", _miscPortLineEdit->text());
1705 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1706 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1707// Reqc
1708 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1709 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1710 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1711 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1712 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1713 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1714 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1715 settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1716 settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1717// SP3 Comparison
1718 settings.setValue("sp3CompFile", _sp3CompFileChooser->fileName());
1719 settings.setValue("sp3CompExclude", _sp3CompExclude->text());
1720 settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1721// Combine Corrections
1722 if (!combineStreams.isEmpty()) {
1723 settings.setValue("combineStreams", combineStreams);
1724 }
1725 else {
1726 settings.setValue("combineStreams", "");
1727 }
1728 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1729 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1730 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1731 settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1732// Upload Corrections
1733 if (!uploadMountpointsOut.isEmpty()) {
1734 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1735 }
1736 else {
1737 settings.setValue("uploadMountpointsOut", "");
1738 }
1739 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1740 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1741 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1742 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1743 settings.setValue("uploadAntexFile", _uploadAntexFile->fileName());
1744// Upload Ephemeris
1745 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1746 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1747 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1748 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1749 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1750
1751 if (_caster) {
1752 _caster->readMountPoints();
1753 }
1754
1755 _pppWidgets.saveOptions();
1756}
1757
1758// All get slots terminated
1759////////////////////////////////////////////////////////////////////////////
1760void bncWindow::slotGetThreadsFinished() {
1761 BNC_CORE->slotMessage("All Get Threads Terminated", true);
1762 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
1763 delete _casterEph; _casterEph = 0;
1764 _runningRealTime = false;
1765}
1766
1767// Start It!
1768////////////////////////////////////////////////////////////////////////////
1769void bncWindow::slotStart() {
1770 saveOptions();
1771 if ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1772 _runningPPP = true;
1773 enableStartStop();
1774 _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1775 BNC_CORE->startPPP();
1776 }
1777 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1778 if (_reqcActionComboBox->currentText() == "Analyze") {
1779 _runningQC = true;
1780 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1781 connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1782 reqcAnalyze->start();
1783 }
1784 else {
1785 _runningEdit = true;
1786 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1787 connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1788 reqcEdit->start();
1789 }
1790 enableStartStop();
1791 }
1792 else if (!_sp3CompFileChooser->fileName().isEmpty()) {
1793 _runningSp3Comp = true;
1794 t_sp3Comp* sp3Comp = new t_sp3Comp(this);
1795 connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1796 sp3Comp->start();
1797 enableStartStop();
1798 }
1799 else {
1800 startRealTime();
1801 BNC_CORE->startPPP();
1802 }
1803}
1804
1805// Start Real-Time (Retrieve Data etc.)
1806////////////////////////////////////////////////////////////////////////////
1807void bncWindow::startRealTime() {
1808
1809 _runningRealTime = true;
1810
1811 _bncFigurePPP->reset();
1812
1813 _actDeleteMountPoints->setEnabled(false);
1814
1815 enableStartStop();
1816
1817 _caster = new bncCaster();
1818
1819 BNC_CORE->setCaster(_caster);
1820 BNC_CORE->setPortEph(_outEphPortLineEdit->text().toInt());
1821 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
1822 BNC_CORE->initCombination();
1823
1824 connect(_caster, SIGNAL(getThreadsFinished()),
1825 this, SLOT(slotGetThreadsFinished()));
1826
1827 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
1828 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
1829
1830 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " ("BNC_OS") ==========", true);
1831
1832 bncSettings settings;
1833
1834 QDir rnxdir(settings.value("rnxPath").toString());
1835 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
1836
1837 QString rnx_file = settings.value("rnxScript").toString();
1838 if ( !rnx_file.isEmpty() ) {
1839 QFile rnxfile(settings.value("rnxScript").toString());
1840 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
1841 }
1842
1843 QDir ephdir(settings.value("ephPath").toString());
1844 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
1845
1846 QDir corrdir(settings.value("corrPath").toString());
1847 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
1848
1849 QString advise_file = settings.value("adviseScript").toString();
1850 if ( !advise_file.isEmpty() ) {
1851 QFile advisefile(settings.value("adviseScript").toString());
1852 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
1853 }
1854
1855 _caster->readMountPoints();
1856
1857 _casterEph = new bncEphUploadCaster();
1858 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
1859 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
1860}
1861
1862// Retrieve Data
1863////////////////////////////////////////////////////////////////////////////
1864void bncWindow::slotStop() {
1865 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
1866 QMessageBox::Yes, QMessageBox::No,
1867 QMessageBox::NoButton);
1868 if (iRet == QMessageBox::Yes) {
1869 BNC_CORE->stopPPP();
1870 BNC_CORE->stopCombination();
1871 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
1872 delete _casterEph; _casterEph = 0;
1873 _runningRealTime = false;
1874 _runningPPP = false;
1875 enableStartStop();
1876 }
1877}
1878
1879// Close Application gracefully
1880////////////////////////////////////////////////////////////////////////////
1881void bncWindow::closeEvent(QCloseEvent* event) {
1882
1883 int iRet = QMessageBox::question(this, "Close", "Save Options?",
1884 QMessageBox::Yes, QMessageBox::No,
1885 QMessageBox::Cancel);
1886
1887 if (iRet == QMessageBox::Cancel) {
1888 event->ignore();
1889 return;
1890 }
1891 else if (iRet == QMessageBox::Yes) {
1892 slotSaveOptions();
1893 }
1894
1895 BNC_CORE->stopPPP();
1896
1897 QMainWindow::closeEvent(event);
1898}
1899
1900// User changed the selection of mountPoints
1901////////////////////////////////////////////////////////////////////////////
1902void bncWindow::slotSelectionChanged() {
1903 if (_mountPointsTable->selectedItems().isEmpty()) {
1904 _actDeleteMountPoints->setEnabled(false);
1905 }
1906 else {
1907 _actDeleteMountPoints->setEnabled(true);
1908 }
1909}
1910
1911// Display Program Messages
1912////////////////////////////////////////////////////////////////////////////
1913void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
1914 if (showOnScreen ) {
1915 _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
1916 }
1917}
1918
1919// About Message
1920////////////////////////////////////////////////////////////////////////////
1921void bncWindow::slotAbout() {
1922 new bncAboutDlg(0);
1923}
1924
1925//Flowchart
1926////////////////////////////////////////////////////////////////////////////
1927void bncWindow::slotFlowchart() {
1928 new bncFlowchartDlg(0);
1929}
1930
1931// Help Window
1932////////////////////////////////////////////////////////////////////////////
1933void bncWindow::slotHelp() {
1934 QUrl url;
1935 url.setPath(":bnchelp.html");
1936 new bncHlpDlg(0, url);
1937}
1938
1939// Select Fonts
1940////////////////////////////////////////////////////////////////////////////
1941void bncWindow::slotFontSel() {
1942 bool ok;
1943 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
1944 if (ok) {
1945 bncSettings settings;
1946 settings.setValue("font", newFont.toString());
1947 QApplication::setFont(newFont);
1948 int ww = QFontMetrics(newFont).width('w');
1949 setMinimumSize(60*ww, 80*ww);
1950 resize(60*ww, 80*ww);
1951 }
1952}
1953
1954// Whats This Help
1955void bncWindow::slotWhatsThis() {
1956 QWhatsThis::enterWhatsThisMode();
1957}
1958
1959//
1960////////////////////////////////////////////////////////////////////////////
1961void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
1962 _threads = threads;
1963
1964 _bncFigure->updateMountPoints();
1965 _bncFigureLate->updateMountPoints();
1966
1967 populateMountPointsTable();
1968 bncSettings settings;
1969 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
1970 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
1971 QListIterator<bncGetThread*> iTh(threads);
1972 while (iTh.hasNext()) {
1973 bncGetThread* thread = iTh.next();
1974 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1975 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1976 "@" + _mountPointsTable->item(iRow, 1)->text() );
1977 if (url == thread->mountPoint() &&
1978 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
1979 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
1980 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
1981 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
1982 _bncFigure, SLOT(slotNewData(QByteArray, double)));
1983 connect(thread, SIGNAL(newBytes(QByteArray, double)),
1984 _bncFigure, SLOT(slotNewData(QByteArray, double)));
1985 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
1986 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
1987 connect(thread, SIGNAL(newLatency(QByteArray, double)),
1988 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
1989 break;
1990 }
1991 }
1992 }
1993}
1994
1995//
1996////////////////////////////////////////////////////////////////////////////
1997void bncWindow::CreateMenu() {
1998 // Create Menus
1999 // ------------
2000 _menuFile = menuBar()->addMenu(tr("&File"));
2001 _menuFile->addAction(_actFontSel);
2002 _menuFile->addSeparator();
2003 _menuFile->addAction(_actSaveOpt);
2004 _menuFile->addSeparator();
2005 _menuFile->addAction(_actQuit);
2006
2007 _menuHlp = menuBar()->addMenu(tr("&Help"));
2008 _menuHlp->addAction(_actHelp);
2009 _menuHlp->addAction(_actFlowchart);
2010 _menuHlp->addAction(_actAbout);
2011}
2012
2013// Toolbar
2014////////////////////////////////////////////////////////////////////////////
2015void bncWindow::AddToolbar() {
2016 QToolBar* toolBar = new QToolBar;
2017 addToolBar(Qt::BottomToolBarArea, toolBar);
2018 toolBar->setMovable(false);
2019 toolBar->addAction(_actAddMountPoints);
2020 toolBar->addAction(_actDeleteMountPoints);
2021 toolBar->addAction(_actMapMountPoints);
2022 toolBar->addAction(_actStart);
2023 toolBar->addAction(_actStop);
2024 toolBar->addWidget(new QLabel(" "));
2025 toolBar->addAction(_actwhatsthis);
2026}
2027
2028// About
2029////////////////////////////////////////////////////////////////////////////
2030bncAboutDlg::bncAboutDlg(QWidget* parent) :
2031 QDialog(parent) {
2032
2033 QTextBrowser* tb = new QTextBrowser;
2034 QUrl url; url.setPath(":bncabout.html");
2035 tb->setSource(url);
2036 tb->setReadOnly(true);
2037
2038 int ww = QFontMetrics(font()).width('w');
2039 QPushButton* _closeButton = new QPushButton("Close");
2040 _closeButton->setMaximumWidth(10*ww);
2041 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2042
2043 QGridLayout* dlgLayout = new QGridLayout();
2044 QLabel* img = new QLabel();
2045 img->setPixmap(QPixmap(":ntrip-logo.png"));
2046 dlgLayout->addWidget(img, 0,0);
2047 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2048 dlgLayout->addWidget(tb,1,0,1,2);
2049 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2050
2051 setLayout(dlgLayout);
2052 resize(60*ww, 60*ww);
2053 setWindowTitle("About BNC");
2054 show();
2055}
2056
2057//
2058////////////////////////////////////////////////////////////////////////////
2059bncAboutDlg::~bncAboutDlg() {
2060};
2061
2062// Flowchart
2063////////////////////////////////////////////////////////////////////////////
2064bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2065 QDialog(parent) {
2066
2067 int ww = QFontMetrics(font()).width('w');
2068 QPushButton* _closeButton = new QPushButton("Close");
2069 _closeButton->setMaximumWidth(10*ww);
2070 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2071
2072 QGridLayout* dlgLayout = new QGridLayout();
2073 QLabel* img = new QLabel();
2074 img->setPixmap(QPixmap(":bncflowchart.png"));
2075 dlgLayout->addWidget(img, 0,0);
2076 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2077
2078 setLayout(dlgLayout);
2079 setWindowTitle("Flow Chart");
2080 show();
2081}
2082
2083//
2084////////////////////////////////////////////////////////////////////////////
2085bncFlowchartDlg::~bncFlowchartDlg() {
2086};
2087
2088// Enable/Disable Widget (and change its color)
2089////////////////////////////////////////////////////////////////////////////
2090void bncWindow::enableWidget(bool enable, QWidget* widget) {
2091 const static QPalette paletteWhite(QColor(255, 255, 255));
2092 const static QPalette paletteGray(QColor(230, 230, 230));
2093
2094 widget->setEnabled(enable);
2095 if (enable) {
2096 widget->setPalette(paletteWhite);
2097 }
2098 else {
2099 widget->setPalette(paletteGray);
2100 }
2101}
2102
2103// Bnc Text
2104////////////////////////////////////////////////////////////////////////////
2105void bncWindow::slotBncTextChanged(){
2106
2107 bool enable = true;
2108
2109 // Proxy
2110 //------
2111 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2112 enable = !_proxyHostLineEdit->text().isEmpty();
2113 enableWidget(enable, _proxyPortLineEdit);
2114 }
2115
2116 // RINEX Observations
2117 // ------------------
2118 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2119 enable = !_rnxPathLineEdit->text().isEmpty();
2120 enableWidget(enable, _rnxIntrComboBox);
2121 enableWidget(enable, _rnxSamplSpinBox);
2122 enableWidget(enable, _rnxSkelLineEdit);
2123 enableWidget(enable, _rnxScrpLineEdit);
2124 enableWidget(enable, _rnxV3CheckBox);
2125 if (!_rnxV3CheckBox->isChecked()) {
2126 enableWidget(enable, _rnxV2Priority);
2127 }
2128 else {
2129 enableWidget(false, _rnxV2Priority);
2130 }
2131 }
2132
2133 // RINEX Observations, Signal Priority
2134 // -----------------------------------
2135 if (sender() == 0 || sender() == _rnxV3CheckBox) {
2136 if (!_rnxV3CheckBox->isChecked()) {
2137 enableWidget(true, _rnxV2Priority);
2138 }
2139 else {
2140 enableWidget(false, _rnxV2Priority);
2141 }
2142 }
2143
2144 // RINEX Ephemeris
2145 // ---------------
2146 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2147 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2148 enableWidget(enable, _ephIntrComboBox);
2149 enableWidget(enable, _ephV3CheckBox);
2150 }
2151
2152 // Broadcast Corrections
2153 // ---------------------
2154 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2155 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2156 enableWidget(enable, _corrIntrComboBox);
2157 }
2158
2159 // Feed Engine
2160 // -----------
2161 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2162 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2163 enableWidget(enable, _waitTimeSpinBox);
2164 enableWidget(enable, _binSamplSpinBox);
2165 }
2166
2167 // Serial Output
2168 // -------------
2169 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2170 sender() == _serialAutoNMEAComboBox) {
2171 enable = !_serialMountPointLineEdit->text().isEmpty();
2172 enableWidget(enable, _serialPortNameLineEdit);
2173 enableWidget(enable, _serialBaudRateComboBox);
2174 enableWidget(enable, _serialParityComboBox);
2175 enableWidget(enable, _serialDataBitsComboBox);
2176 enableWidget(enable, _serialStopBitsComboBox);
2177 enableWidget(enable, _serialFlowControlComboBox);
2178 enableWidget(enable, _serialAutoNMEAComboBox);
2179
2180 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2181 enableWidget(enable2, _serialFileNMEALineEdit);
2182 bool enable3 = enable && _serialAutoNMEAComboBox->currentText() == "Manual";
2183 enableWidget(enable3, _serialHeightNMEALineEdit);
2184 }
2185
2186 // Outages
2187 // -------
2188 if (sender() == 0 || sender() == _obsRateComboBox) {
2189 enable = !_obsRateComboBox->currentText().isEmpty();
2190 enableWidget(enable, _adviseFailSpinBox);
2191 enableWidget(enable, _adviseRecoSpinBox);
2192 enableWidget(enable, _adviseScriptLineEdit);
2193 }
2194
2195 // Miscellaneous
2196 // -------------
2197 if (sender() == 0 || sender() == _miscMountLineEdit) {
2198 enable = !_miscMountLineEdit->text().isEmpty();
2199 enableWidget(enable, _perfIntrComboBox);
2200 enableWidget(enable, _scanRTCMCheckBox);
2201 enableWidget(enable, _miscPortLineEdit);
2202 }
2203
2204 // Enable/disable Broadcast Ephemerides
2205 // ------------------------------------
2206 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2207 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2208 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2209 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2210 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2211 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2212 _uploadEphPortLineEdit->setEnabled(true);
2213 _uploadEphMountpointLineEdit->setEnabled(true);
2214 _uploadEphPasswordLineEdit->setEnabled(true);
2215 _uploadEphSampleSpinBox->setEnabled(true);
2216 }
2217 else {
2218 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2219 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2220 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2221 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2222 _uploadEphPortLineEdit->setEnabled(false);
2223 _uploadEphMountpointLineEdit->setEnabled(false);
2224 _uploadEphPasswordLineEdit->setEnabled(false);
2225 _uploadEphSampleSpinBox->setEnabled(false);
2226 }
2227 }
2228
2229 // Combine Corrections
2230 // -------------------
2231 if (sender() == 0 || sender() == _cmbTable) {
2232 int iRow = _cmbTable->rowCount();
2233 if (iRow > 0) {
2234 enableWidget(true, _cmbMethodComboBox);
2235 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2236 _cmbSamplSpinBox->setStyleSheet("background-color: white");
2237 _cmbMaxresLineEdit->setEnabled(true);
2238 _cmbSamplSpinBox->setEnabled(true);
2239 _cmbUseGlonass->setEnabled(true);
2240 }
2241 else {
2242 enableWidget(false, _cmbMethodComboBox);
2243 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2244 _cmbSamplSpinBox->setStyleSheet("background-color: lightGray");
2245 _cmbMaxresLineEdit->setEnabled(false);
2246 _cmbSamplSpinBox->setEnabled(false);
2247 _cmbUseGlonass->setEnabled(false);
2248 }
2249 }
2250
2251 // Upload(clk)
2252 // -----------
2253 int iRow = _uploadTable->rowCount();
2254 if (iRow > 0) {
2255 enableWidget(true, _uploadIntrComboBox);
2256 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2257 enableWidget(true, _uploadSamplClkRnxSpinBox);
2258 enableWidget(true, _uploadSamplSp3SpinBox);
2259 enableWidget(true, _uploadAntexFile);
2260 }
2261 else {
2262 enableWidget(false, _uploadIntrComboBox);
2263 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2264 enableWidget(false, _uploadSamplClkRnxSpinBox);
2265 enableWidget(false, _uploadSamplSp3SpinBox);
2266 enableWidget(false, _uploadAntexFile);
2267 }
2268
2269 // QC
2270 // --
2271 if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2272 enable = !_reqcActionComboBox->currentText().isEmpty();
2273 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2274 bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2275 enableWidget(enable, _reqcObsFileChooser);
2276 enableWidget(enable, _reqcNavFileChooser);
2277 enableWidget(enable, _reqcOutLogLineEdit);
2278 enableWidget(enable && enable10, _reqcEditOptionButton);
2279 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2280 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2281 enableWidget(enable && !enable10, _reqcLogSummaryOnly);
2282 enableWidget(enable && !enable10, _reqcSkyPlotSignals);
2283 enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2284 }
2285
2286 // SP3 File Comparison
2287 // -------------------
2288 if (sender() == 0 || sender() == _sp3CompFileChooser) {
2289 enable = !_sp3CompFileChooser->fileName().isEmpty();
2290 enableWidget(enable, _sp3CompLogLineEdit);
2291 enableWidget(enable, _sp3CompExclude);
2292 }
2293
2294 enableStartStop();
2295}
2296
2297//
2298////////////////////////////////////////////////////////////////////////////
2299void bncWindow::slotAddCmbRow() {
2300 int iRow = _cmbTable->rowCount();
2301 _cmbTable->insertRow(iRow);
2302 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2303 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2304 }
2305}
2306
2307//
2308////////////////////////////////////////////////////////////////////////////
2309void bncWindow::slotDelCmbRow() {
2310 int nRows = _cmbTable->rowCount();
2311 bool flg[nRows];
2312 for (int iRow = 0; iRow < nRows; iRow++) {
2313 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2314 flg[iRow] = true;
2315 }
2316 else {
2317 flg[iRow] = false;
2318 }
2319 }
2320 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2321 if (flg[iRow]) {
2322 _cmbTable->removeRow(iRow);
2323 }
2324 }
2325 nRows = _cmbTable->rowCount();
2326 if (nRows < 1) {
2327 enableWidget(false, _cmbMethodComboBox);
2328 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2329 _cmbSamplSpinBox->setStyleSheet("background-color: lightGray");
2330 _cmbMaxresLineEdit->setEnabled(false);
2331 _cmbSamplSpinBox->setEnabled(false);
2332 _cmbUseGlonass->setEnabled(false);
2333 }
2334}
2335
2336//
2337////////////////////////////////////////////////////////////////////////////
2338void bncWindow::populateCmbTable() {
2339
2340 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2341 _cmbTable->removeRow(iRow);
2342 }
2343
2344 bncSettings settings;
2345
2346 int iRow = -1;
2347 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2348 while (it.hasNext()) {
2349 QStringList hlp = it.next().split(" ");
2350 if (hlp.size() > 2) {
2351 ++iRow;
2352 _cmbTable->insertRow(iRow);
2353 }
2354 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2355 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2356 }
2357 }
2358}
2359
2360//
2361////////////////////////////////////////////////////////////////////////////
2362void bncWindow::slotAddUploadRow() {
2363 int iRow = _uploadTable->rowCount();
2364 _uploadTable->insertRow(iRow);
2365 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2366 if (iCol == 3) {
2367 QLineEdit* passwd = new QLineEdit();
2368 passwd->setFrame(false);
2369 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2370 _uploadTable->setCellWidget(iRow, iCol, passwd);
2371 }
2372 else if (iCol == 4) {
2373 QComboBox* system = new QComboBox();
2374 system->setEditable(false);
2375 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2376 system->setFrame(false);
2377 _uploadTable->setCellWidget(iRow, iCol, system);
2378 }
2379 else if (iCol == 5) {
2380 QCheckBox* com = new QCheckBox();
2381 _uploadTable->setCellWidget(iRow, iCol, com);
2382 }
2383 else if (iCol == 11) {
2384 bncTableItem* bncIt = new bncTableItem();
2385 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2386 _uploadTable->setItem(iRow, iCol, bncIt);
2387 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2388 }
2389 else {
2390 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2391 }
2392 }
2393}
2394
2395//
2396////////////////////////////////////////////////////////////////////////////
2397void bncWindow::slotDelUploadRow() {
2398 BNC_CORE->_uploadTableItems.clear();
2399 int nRows = _uploadTable->rowCount();
2400 bool flg[nRows];
2401 for (int iRow = 0; iRow < nRows; iRow++) {
2402 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2403 flg[iRow] = true;
2404 }
2405 else {
2406 flg[iRow] = false;
2407 }
2408 }
2409 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2410 if (flg[iRow]) {
2411 _uploadTable->removeRow(iRow);
2412 }
2413 }
2414 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2415 BNC_CORE->_uploadTableItems[iRow] =
2416 (bncTableItem*) _uploadTable->item(iRow, 11);
2417 }
2418 nRows = _uploadTable->rowCount();
2419 if (nRows < 1) {
2420 enableWidget(false, _uploadIntrComboBox);
2421 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2422 enableWidget(false, _uploadSamplSp3SpinBox);
2423 enableWidget(false, _uploadSamplClkRnxSpinBox);
2424 enableWidget(false, _uploadAntexFile);
2425 }
2426}
2427
2428//
2429////////////////////////////////////////////////////////////////////////////
2430void bncWindow::populateUploadTable() {
2431 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2432 _uploadTable->removeRow(iRow);
2433 }
2434
2435 bncSettings settings;
2436
2437 int iRow = -1;
2438 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2439 while (it.hasNext()) {
2440 QStringList hlp = it.next().split(",");
2441 if (hlp.size() > 6) {
2442 ++iRow;
2443 _uploadTable->insertRow(iRow);
2444 }
2445 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2446 if (iCol == 3) {
2447 QLineEdit* passwd = new QLineEdit();
2448 passwd->setFrame(false);
2449 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2450 passwd->setText(hlp[iCol]);
2451 _uploadTable->setCellWidget(iRow, iCol, passwd);
2452 }
2453 else if (iCol == 4) {
2454 QComboBox* system = new QComboBox();
2455 system->setEditable(false);
2456 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2457 system->setFrame(false);
2458 system->setCurrentIndex(system->findText(hlp[iCol]));
2459 _uploadTable->setCellWidget(iRow, iCol, system);
2460 }
2461 else if (iCol == 5) {
2462 QCheckBox* com = new QCheckBox();
2463 if (hlp[iCol].toInt() == Qt::Checked) {
2464 com->setCheckState(Qt::Checked);
2465 }
2466 _uploadTable->setCellWidget(iRow, iCol, com);
2467 }
2468 else if (iCol == 11) {
2469 bncTableItem* bncIt = new bncTableItem();
2470 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2471 _uploadTable->setItem(iRow, iCol, bncIt);
2472 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2473 }
2474 else {
2475 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2476 }
2477 }
2478 }
2479}
2480
2481//
2482////////////////////////////////////////////////////////////////////////////
2483void bncWindow::slotSetUploadTrafo() {
2484 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2485 dlg->exec();
2486 delete dlg;
2487}
2488
2489// Progress Bar Change
2490////////////////////////////////////////////////////////////////////////////
2491void bncWindow::slotPostProcessingProgress(int nEpo) {
2492 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2493}
2494
2495// Post-Processing Reqc Finished
2496////////////////////////////////////////////////////////////////////////////
2497void bncWindow::slotPostProcessingFinished() {
2498 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2499 _runningPPP = false;
2500 _runningEdit = false;
2501 _runningQC = false;
2502 _runningSp3Comp = false;
2503 _actStart->setText(tr("Sta&rt"));
2504 enableStartStop();
2505}
2506
2507// Edit teqc-like editing options
2508////////////////////////////////////////////////////////////////////////////
2509void bncWindow::slotReqcEditOption() {
2510 saveOptions();
2511 reqcDlg* dlg = new reqcDlg(this);
2512 dlg->move(this->pos().x()+50, this->pos().y()+50);
2513 dlg->exec();
2514 delete dlg;
2515}
2516
2517// Enable/Disable Start and Stop Buttons
2518////////////////////////////////////////////////////////////////////////////
2519void bncWindow::enableStartStop() {
2520 if ( running() ) {
2521 _actStart->setEnabled(false);
2522 if (_runningRealTime || _runningPPP) {
2523 _actStop->setEnabled(true);
2524 }
2525 }
2526 else {
2527 _actStart->setEnabled(true);
2528 _actStop->setEnabled(false);
2529 }
2530}
2531
2532// Show Map
2533////////////////////////////////////////////////////////////////////////////
2534void bncWindow::slotMapMountPoints() {
2535 saveOptions();
2536 t_bncMap* bncMap = new t_bncMap(this);
2537 bncMap->setMinimumSize(800, 600);
2538 bncMap->setWindowTitle("Selected Mountpoints");
2539
2540 bncSettings settings;
2541 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2542 while (it.hasNext()) {
2543 QStringList hlp = it.next().split(" ");
2544 if (hlp.size() < 5) continue;
2545 QUrl url(hlp[0]);
2546 double latDeg = hlp[2].toDouble();
2547 double lonDeg = hlp[3].toDouble();
2548 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2549 }
2550
2551 bncMap->show();
2552}
2553
2554// Show Map
2555////////////////////////////////////////////////////////////////////////////
2556void bncWindow::slotMapPPP() {
2557#ifdef QT_WEBKIT
2558 saveOptions();
2559 enableWidget(false, _pppWidgets._mapWinButton);
2560 enableWidget(false, _pppWidgets._useGoogleMap);
2561 enableWidget(false, _pppWidgets._useOpenStreetMap);
2562 enableWidget(false, _pppWidgets._mapWinDotSize);
2563 enableWidget(false, _pppWidgets._mapWinDotColor);
2564
2565 if (!_mapWin) {
2566 _mapWin = new bncMapWin(this);
2567 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2568 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2569 _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2570 }
2571 _mapWin->show();
2572#else
2573 QMessageBox::information(this, "Information",
2574 "Qt Library compiled without QtWebKit");
2575#endif
2576}
2577
2578// Show Map
2579////////////////////////////////////////////////////////////////////////////
2580void bncWindow::slotMapPPPClosed() {
2581#ifdef QT_WEBKIT
2582 enableWidget(true, _pppWidgets._mapWinButton);
2583 enableWidget(true, _pppWidgets._useGoogleMap);
2584 enableWidget(true, _pppWidgets._useOpenStreetMap);
2585 enableWidget(true, _pppWidgets._mapWinDotSize);
2586 enableWidget(true, _pppWidgets._mapWinDotColor);
2587 if (_mapWin) {
2588 QListIterator<bncGetThread*> it(_threads);
2589 while (it.hasNext()) {
2590 bncGetThread* thread = it.next();
2591 thread->disconnect(_mapWin);
2592 }
2593 _mapWin->deleteLater();
2594 _mapWin = 0;
2595 }
2596#endif
2597}
Note: See TracBrowser for help on using the repository browser.