source: ntrip/trunk/BNC/src/bncwindow.cpp@ 6714

Last change on this file since 6714 was 6714, checked in by weber, 7 years ago

Documentation completed

File size: 132.8 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70# include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83#ifdef GNSSCENTER_PLUGIN
84 BNC_CORE->setConfFileName("");
85#endif
86
87 _caster = 0;
88 _casterEph = 0;
89
90 _bncFigure = new bncFigure(this);
91 _bncFigureLate = new bncFigureLate(this);
92 _bncFigurePPP = new bncFigurePPP(this);
93
94 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
95 _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
96
97 connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
98 connect(BNC_CORE, SIGNAL(finishedRnxPPP()), this, SLOT(slotPostProcessingFinished()));
99
100 _runningRealTime = false;
101 _runningPPP = false;
102 _runningEdit = false;
103 _runningQC = false;
104 _runningSp3Comp = false;
105 _reqcActionComboBox = 0; // necessary for enableStartStop()
106
107 _mapWin = 0;
108
109 int ww = QFontMetrics(this->font()).width('w');
110
111 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
112
113 setMinimumSize(100*ww, 70*ww);
114
115 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
116
117 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
118 this, SLOT(slotWindowMessage(QByteArray,bool)));
119
120 // Create Actions
121 // --------------
122 _actHelp = new QAction(tr("&Help Contents"),this);
123 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
124
125 _actAbout = new QAction(tr("&About BNC"),this);
126 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
127
128 _actFlowchart = new QAction(tr("&Flow Chart"),this);
129 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
130
131 _actFontSel = new QAction(tr("Select &Font"),this);
132 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
133
134 _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
135 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
136
137 _actQuit = new QAction(tr("&Quit"),this);
138 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
139
140 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
141 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
142
143 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
144 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
145 _actDeleteMountPoints->setEnabled(false);
146
147 _actMapMountPoints = new QAction(tr("&Map"),this);
148 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
149
150 _actStart = new QAction(tr("Sta&rt"),this);
151 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
152
153 _actStop = new QAction(tr("Sto&p"),this);
154 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
155
156 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
157 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
158
159 CreateMenu();
160 AddToolbar();
161
162 bncSettings settings;
163
164 // Network Options
165 // ---------------
166 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
167 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
168
169 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
170 this, SLOT(slotBncTextChanged()));
171
172 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
173 _ignoreSslErrorsCheckBox = new QCheckBox();
174 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
175 settings.value("ignoreSslErrors").toInt()));
176
177 // General Options
178 // ---------------
179 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
180 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
181 _rnxAppendCheckBox = new QCheckBox();
182 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
183 settings.value("rnxAppend").toInt()));
184 _onTheFlyComboBox = new QComboBox();
185 _onTheFlyComboBox->setEditable(false);
186 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
187 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
188 if (ii != -1) {
189 _onTheFlyComboBox->setCurrentIndex(ii);
190 }
191 _autoStartCheckBox = new QCheckBox();
192 _autoStartCheckBox->setCheckState(Qt::CheckState(
193 settings.value("autoStart").toInt()));
194
195 // RINEX Observations Options
196 // --------------------------
197 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
198 _rnxIntrComboBox = new QComboBox();
199 _rnxIntrComboBox->setEditable(false);
200 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
201 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
202 if (ii != -1) {
203 _rnxIntrComboBox->setCurrentIndex(ii);
204 }
205 _rnxSamplSpinBox = new QSpinBox();
206 _rnxSamplSpinBox->setMinimum(0);
207 _rnxSamplSpinBox->setMaximum(60);
208 _rnxSamplSpinBox->setSingleStep(5);
209 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
210 _rnxSamplSpinBox->setSuffix(" sec");
211 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
212 _rnxSkelLineEdit->setMaximumWidth(5*ww);
213 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
214 _rnxV3CheckBox = new QCheckBox();
215 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
216 QString hlp = settings.value("rnxV2Priority").toString();
217 if (hlp.isEmpty()) {
218 hlp = "CWPX_?";
219 }
220 _rnxV2Priority = new QLineEdit(hlp);
221
222 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
223 this, SLOT(slotBncTextChanged()));
224 connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
225 this, SLOT(slotBncTextChanged()));
226
227 // RINEX Ephemeris Options
228 // -----------------------
229 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
230 _ephIntrComboBox = new QComboBox();
231 _ephIntrComboBox->setEditable(false);
232 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
233 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
234 if (jj != -1) {
235 _ephIntrComboBox->setCurrentIndex(jj);
236 }
237 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
238 _ephV3CheckBox = new QCheckBox();
239 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
240
241 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
242 this, SLOT(slotBncTextChanged()));
243
244 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
245 this, SLOT(slotBncTextChanged()));
246
247 // Broadcast Corrections Options
248 // -----------------------------
249 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
250 _corrIntrComboBox = new QComboBox();
251 _corrIntrComboBox->setEditable(false);
252 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
253 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
254 if (mm != -1) {
255 _corrIntrComboBox->setCurrentIndex(mm);
256 }
257 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
258
259 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
260 this, SLOT(slotBncTextChanged()));
261
262 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
263 this, SLOT(slotBncTextChanged()));
264
265 // Feed Engine Options
266 // -------------------
267 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
268 _waitTimeSpinBox = new QSpinBox();
269 _waitTimeSpinBox->setMinimum(1);
270 _waitTimeSpinBox->setMaximum(30);
271 _waitTimeSpinBox->setSingleStep(1);
272 _waitTimeSpinBox->setSuffix(" sec");
273 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
274 _binSamplSpinBox = new QSpinBox();
275 _binSamplSpinBox->setMinimum(0);
276 _binSamplSpinBox->setMaximum(60);
277 _binSamplSpinBox->setSingleStep(5);
278 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
279 _binSamplSpinBox->setSuffix(" sec");
280 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
281 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
282
283 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
284 this, SLOT(slotBncTextChanged()));
285
286 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
287 this, SLOT(slotBncTextChanged()));
288
289 // Serial Output Options
290 // ---------------------
291 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
292 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
293 _serialBaudRateComboBox = new QComboBox();
294 _serialBaudRateComboBox->addItems(QString("110,300,600,"
295 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
296 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
297 if (kk != -1) {
298 _serialBaudRateComboBox->setCurrentIndex(kk);
299 }
300 _serialFlowControlComboBox = new QComboBox();
301 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
302 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
303 if (kk != -1) {
304 _serialFlowControlComboBox->setCurrentIndex(kk);
305 }
306 _serialDataBitsComboBox = new QComboBox();
307 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
308 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
309 if (kk != -1) {
310 _serialDataBitsComboBox->setCurrentIndex(kk);
311 }
312 _serialParityComboBox = new QComboBox();
313 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
314 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
315 if (kk != -1) {
316 _serialParityComboBox->setCurrentIndex(kk);
317 }
318 _serialStopBitsComboBox = new QComboBox();
319 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
320 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
321 if (kk != -1) {
322 _serialStopBitsComboBox->setCurrentIndex(kk);
323 }
324 _serialAutoNMEAComboBox = new QComboBox();
325 _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual").split(","));
326 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
327 if (kk != -1) {
328 _serialAutoNMEAComboBox->setCurrentIndex(kk);
329 }
330 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
331 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
332
333 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
334 this, SLOT(slotBncTextChanged()));
335
336 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
337 this, SLOT(slotBncTextChanged()));
338
339 // Outages Options
340 // ---------------
341 _obsRateComboBox = new QComboBox();
342 _obsRateComboBox->setEditable(false);
343 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
344 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
345 if (kk != -1) {
346 _obsRateComboBox->setCurrentIndex(kk);
347 }
348 _adviseFailSpinBox = new QSpinBox();
349 _adviseFailSpinBox->setMinimum(0);
350 _adviseFailSpinBox->setMaximum(60);
351 _adviseFailSpinBox->setSingleStep(1);
352 _adviseFailSpinBox->setSuffix(" min");
353 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
354 _adviseRecoSpinBox = new QSpinBox();
355 _adviseRecoSpinBox->setMinimum(0);
356 _adviseRecoSpinBox->setMaximum(60);
357 _adviseRecoSpinBox->setSingleStep(1);
358 _adviseRecoSpinBox->setSuffix(" min");
359 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
360 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
361
362 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
363 this, SLOT(slotBncTextChanged()));
364
365 // Miscellaneous Options
366 // ---------------------
367 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
368 _miscPortLineEdit = new QLineEdit(settings.value("miscPort").toString());
369 _perfIntrComboBox = new QComboBox();
370 _perfIntrComboBox->setEditable(false);
371 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
372 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
373 if (ll != -1) {
374 _perfIntrComboBox->setCurrentIndex(ll);
375 }
376 _scanRTCMCheckBox = new QCheckBox();
377 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
378 settings.value("scanRTCM").toInt()));
379
380 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
381 this, SLOT(slotBncTextChanged()));
382
383 // Streams
384 // -------
385 _mountPointsTable = new QTableWidget(0,8);
386
387 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
388 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
389 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
390 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
391 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
392 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
393 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
394 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
395 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
396 _mountPointsTable->setHorizontalHeaderLabels(labels);
397 _mountPointsTable->setGridStyle(Qt::NoPen);
398 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
399 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
400 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
401 _mountPointsTable->hideColumn(0);
402 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
403 SLOT(slotSelectionChanged()));
404 populateMountPointsTable();
405
406 _log = new QTextEdit();
407 _log->setReadOnly(true);
408 QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
409 _log->setFont(msFont);
410 _log->document()->setMaximumBlockCount(1000);
411
412 // Combine Corrections
413 // -------------------
414 _cmbTable = new QTableWidget(0,3);
415 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
416 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
417 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
418 _cmbTable->setMaximumWidth(30*ww);
419 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
420 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
421 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
422 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
423 _cmbTable->horizontalHeader()->setStretchLastSection(true);
424 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
425
426 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
427 _cmbUseGlonass = new QCheckBox();
428 _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
429
430 _cmbSamplSpinBox = new QSpinBox;
431 _cmbSamplSpinBox->setMinimum(10);
432 _cmbSamplSpinBox->setMaximum(60);
433 _cmbSamplSpinBox->setSingleStep(10);
434 _cmbSamplSpinBox->setMaximumWidth(9*ww);
435 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
436 _cmbSamplSpinBox->setSuffix(" sec");
437
438 QPushButton* addCmbRowButton = new QPushButton("Add Row");
439 QPushButton* delCmbRowButton = new QPushButton("Delete");
440
441 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
442 SLOT(slotBncTextChanged()));
443
444 _cmbMethodComboBox = new QComboBox();
445 _cmbMethodComboBox->setEditable(false);
446 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
447 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
448 if (im != -1) {
449 _cmbMethodComboBox->setCurrentIndex(im);
450 }
451
452 int iRow = _cmbTable->rowCount();
453 if (iRow > 0) {
454 enableWidget(true, _cmbMethodComboBox);
455 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
456 _cmbSamplSpinBox->setStyleSheet("background-color: white");
457 _cmbMaxresLineEdit->setEnabled(true);
458 _cmbSamplSpinBox->setEnabled(true);
459 _cmbUseGlonass->setEnabled(true);
460 }
461 else {
462 enableWidget(false, _cmbMethodComboBox);
463 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
464 _cmbSamplSpinBox->setStyleSheet("background-color: lightGray");
465 _cmbMaxresLineEdit->setEnabled(false);
466 _cmbSamplSpinBox->setEnabled(false);
467 _cmbUseGlonass->setEnabled(false);
468 }
469
470 // Upload Results
471 // -------------
472 _uploadTable = new QTableWidget(0,12);
473 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
474 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
475 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
476 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
477 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
478 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
479 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
480 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
481 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
482 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
483 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
484 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
485 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
486 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
487 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
488 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
489 _uploadTable->horizontalHeader()->setStretchLastSection(true);
490 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
491
492 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
493 SLOT(slotBncTextChanged()));
494
495 QPushButton* addUploadRowButton = new QPushButton("Add Row");
496 QPushButton* delUploadRowButton = new QPushButton("Del Row");
497 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
498 _uploadIntrComboBox = new QComboBox;
499 _uploadIntrComboBox->setEditable(false);
500 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
501 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
502 if (ii != -1) {
503 _uploadIntrComboBox->setCurrentIndex(ii);
504 }
505
506 _uploadAntexFile = new qtFileChooser(0, qtFileChooser::File);
507 _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
508
509 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
510 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
511 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
512 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
513 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
514 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
515 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
516
517 _uploadSamplSp3SpinBox = new QSpinBox;
518 _uploadSamplSp3SpinBox->setMinimum(0);
519 _uploadSamplSp3SpinBox->setMaximum(15);
520 _uploadSamplSp3SpinBox->setSingleStep(1);
521 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
522 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
523 _uploadSamplSp3SpinBox->setSuffix(" min");
524
525 _uploadSamplClkRnxSpinBox = new QSpinBox;
526 _uploadSamplClkRnxSpinBox->setMinimum(0);
527 _uploadSamplClkRnxSpinBox->setMaximum(60);
528 _uploadSamplClkRnxSpinBox->setSingleStep(5);
529 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
530 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
531 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
532
533 int iRowT = _uploadTable->rowCount();
534 if (iRowT > 0) {
535 enableWidget(true, _uploadIntrComboBox);
536 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
537 enableWidget(true, _uploadSamplSp3SpinBox);
538 enableWidget(true, _uploadSamplClkRnxSpinBox);
539 enableWidget(true, _uploadAntexFile);
540 }
541 else {
542 enableWidget(false, _uploadIntrComboBox);
543 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
544 enableWidget(false, _uploadSamplSp3SpinBox);
545 enableWidget(false, _uploadSamplClkRnxSpinBox);
546 enableWidget(false, _uploadAntexFile);
547 }
548
549 // Upload RTCM3 Ephemeris
550 // ----------------------
551 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
552 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
553 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
554 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
555 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
556 _uploadEphSampleSpinBox = new QSpinBox;
557 _uploadEphSampleSpinBox->setMinimum(5);
558 _uploadEphSampleSpinBox->setMaximum(60);
559 _uploadEphSampleSpinBox->setSingleStep(5);
560 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
561 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
562 _uploadEphSampleSpinBox->setSuffix(" sec");
563 _uploadEphBytesCounter = new bncBytesCounter;
564
565 // Canvas with Editable Fields
566 // ---------------------------
567 _canvas = new QWidget;
568 setCentralWidget(_canvas);
569
570 _aogroup = new QTabWidget();
571 _aogroup->setElideMode(Qt::ElideNone);
572 _aogroup->setUsesScrollButtons(true);
573 QWidget* pgroup = new QWidget();
574 QWidget* ggroup = new QWidget();
575 QWidget* sgroup = new QWidget();
576 QWidget* egroup = new QWidget();
577 QWidget* agroup = new QWidget();
578 QWidget* cgroup = new QWidget();
579 QWidget* ogroup = new QWidget();
580 QWidget* rgroup = new QWidget();
581 QWidget* sergroup = new QWidget();
582 QWidget* pppGroup1 = new QWidget();
583 QWidget* pppGroup2 = new QWidget();
584 QWidget* pppGroup3 = new QWidget();
585 QWidget* pppGroup4 = new QWidget();
586 QWidget* reqcgroup = new QWidget();
587 QWidget* sp3CompGroup = new QWidget();
588 QWidget* cmbgroup = new QWidget();
589 QWidget* uploadgroup = new QWidget();
590 QWidget* uploadEphgroup = new QWidget();
591 _aogroup->addTab(pgroup,tr("Network"));
592 _aogroup->addTab(ggroup,tr("General"));
593 _aogroup->addTab(ogroup,tr("RINEX Observations"));
594 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
595 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
596 _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
597 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
598 _aogroup->addTab(sgroup,tr("Feed Engine"));
599 _aogroup->addTab(sergroup,tr("Serial Output"));
600 _aogroup->addTab(agroup,tr("Outages"));
601 _aogroup->addTab(rgroup,tr("Miscellaneous"));
602 _aogroup->addTab(pppGroup1,tr("PPP (1)"));
603 _aogroup->addTab(pppGroup2,tr("PPP (2)"));
604 _aogroup->addTab(pppGroup3,tr("PPP (3)"));
605 _aogroup->addTab(pppGroup4,tr("PPP (4)"));
606
607#ifdef USE_COMBINATION
608 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
609#endif
610 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
611 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
612
613 // Log Tab
614 // -------
615 _loggroup = new QTabWidget();
616 _loggroup->addTab(_log,tr("Log"));
617 _loggroup->addTab(_bncFigure,tr("Throughput"));
618 _loggroup->addTab(_bncFigureLate,tr("Latency"));
619 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
620
621 // Netowork (Proxy and SSL) Tab
622 // ----------------------------
623 QGridLayout* pLayout = new QGridLayout;
624 pLayout->setColumnMinimumWidth(0,13*ww);
625 _proxyPortLineEdit->setMaximumWidth(9*ww);
626
627 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
628 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
629 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
630 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
631 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
632 pLayout->addWidget(new QLabel("Path to SSL certificates"), 3, 0);
633 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
634 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
635 pLayout->addWidget(new QLabel("Ignore SSL authorization errors"), 4, 0);
636 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
637 pLayout->addWidget(new QLabel(""), 5, 1);
638 pLayout->setRowStretch(6, 999);
639
640 pgroup->setLayout(pLayout);
641
642 // General Tab
643 // -----------
644 QGridLayout* gLayout = new QGridLayout;
645 gLayout->setColumnMinimumWidth(0,14*ww);
646 _onTheFlyComboBox->setMaximumWidth(9*ww);
647
648 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start.<br>"),0, 0, 1, 50);
649 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
650 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,20);
651 gLayout->addWidget(new QLabel("Append files"), 2, 0);
652 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
653 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
654 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
655 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
656 gLayout->addWidget(_autoStartCheckBox, 4, 1);
657 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
658 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,20);
659 gLayout->addWidget(new QLabel(""), 6, 1);
660 gLayout->setRowStretch(7, 999);
661
662 ggroup->setLayout(gLayout);
663
664 // RINEX Observations
665 // ------------------
666 QGridLayout* oLayout = new QGridLayout;
667 oLayout->setColumnMinimumWidth(0,14*ww);
668 _rnxIntrComboBox->setMaximumWidth(9*ww);
669//_rnxSamplSpinBox->setMaximumWidth(9*ww);
670
671 oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
672 oLayout->addWidget(new QLabel("Directory"), 1, 0);
673 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1, 15);
674 oLayout->addWidget(new QLabel("Interval"), 2, 0);
675 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
676 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
677 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
678 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
679 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, Qt::AlignLeft);
680 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
681 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1, 15);
682 oLayout->addWidget(new QLabel("Version 2"), 5, 0);
683 oLayout->addWidget(_rnxV2Priority, 5, 1, 1, 2);
684 oLayout->addWidget(new QLabel(" Signal priority"), 5, 3);
685 oLayout->addWidget(new QLabel("Version 3"), 6, 0);
686 oLayout->addWidget(_rnxV3CheckBox, 6, 1);
687 oLayout->addWidget(new QLabel(""), 7, 1);
688 oLayout->setRowStretch(8, 999);
689
690 ogroup->setLayout(oLayout);
691
692 // RINEX Ephemeris
693 // ---------------
694 QGridLayout* eLayout = new QGridLayout;
695 eLayout->setColumnMinimumWidth(0,14*ww);
696 _ephIntrComboBox->setMaximumWidth(9*ww);
697 _outEphPortLineEdit->setMaximumWidth(9*ww);
698
699 eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
700 eLayout->addWidget(new QLabel("Directory"), 1, 0);
701 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
702 eLayout->addWidget(new QLabel("Interval"), 2, 0);
703 eLayout->addWidget(_ephIntrComboBox, 2, 1);
704 eLayout->addWidget(new QLabel("Port"), 3, 0);
705 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
706 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
707 eLayout->addWidget(_ephV3CheckBox, 4, 1);
708 eLayout->setRowStretch(5, 999);
709
710 egroup->setLayout(eLayout);
711
712
713 // Broadcast Corrections
714 // ---------------------
715 QGridLayout* cLayout = new QGridLayout;
716 cLayout->setColumnMinimumWidth(0,14*ww);
717 _corrIntrComboBox->setMaximumWidth(9*ww);
718 _corrPortLineEdit->setMaximumWidth(9*ww);
719
720 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
721 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
722 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,30);
723 cLayout->addWidget(new QLabel("Interval"), 2, 0);
724 cLayout->addWidget(_corrIntrComboBox, 2, 1);
725 cLayout->addWidget(new QLabel("Port"), 3, 0);
726 cLayout->addWidget(_corrPortLineEdit, 3, 1);
727 cLayout->addWidget(new QLabel(""), 4, 1);
728 cLayout->setRowStretch(7, 999);
729 cgroup->setLayout(cLayout);
730
731 // Feed Engine
732 // -----------
733 QGridLayout* sLayout = new QGridLayout;
734 sLayout->setColumnMinimumWidth(0,14*ww);
735 _outPortLineEdit->setMaximumWidth(9*ww);
736 _waitTimeSpinBox->setMaximumWidth(9*ww);
737 _binSamplSpinBox->setMaximumWidth(9*ww);
738 _outUPortLineEdit->setMaximumWidth(9*ww);
739
740 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
741 sLayout->addWidget(new QLabel("Port"), 1, 0);
742 sLayout->addWidget(_outPortLineEdit, 1, 1);
743 sLayout->addWidget(new QLabel(" Wait for full obs epoch"), 1, 2, Qt::AlignRight);
744 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
745 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
746 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
747 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
748 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 10);
749 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
750 sLayout->addWidget(_outUPortLineEdit, 4, 1);
751 sLayout->addWidget(new QLabel(""), 5, 1);
752 sLayout->setRowStretch(6, 999);
753
754 sgroup->setLayout(sLayout);
755
756 // Serial Output
757 // -------------
758 QGridLayout* serLayout = new QGridLayout;
759 serLayout->setColumnMinimumWidth(0,14*ww);
760 _serialBaudRateComboBox->setMaximumWidth(9*ww);
761 _serialFlowControlComboBox->setMaximumWidth(11*ww);
762 _serialDataBitsComboBox->setMaximumWidth(5*ww);
763 _serialParityComboBox->setMaximumWidth(9*ww);
764 _serialStopBitsComboBox->setMaximumWidth(5*ww);
765 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
766 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
767
768 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
769 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
770 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
771 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
772 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
773 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
774 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
775 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
776 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
777 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
778 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
779 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
780 serLayout->addWidget(_serialParityComboBox, 4, 3);
781 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
782 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
783 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
784 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
785 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
786 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,10);
787 serLayout->addWidget(new QLabel("Height"), 5,14, Qt::AlignRight); // 20
788 serLayout->addWidget(_serialHeightNMEALineEdit, 5,15, 1,11);
789 serLayout->addWidget(new QLabel(""), 6, 1);
790 serLayout->setRowStretch(7, 999);
791
792 sergroup->setLayout(serLayout);
793
794 // Outages
795 // -------
796 QGridLayout* aLayout = new QGridLayout;
797 aLayout->setColumnMinimumWidth(0,14*ww);
798 _obsRateComboBox->setMaximumWidth(9*ww);
799 _adviseFailSpinBox->setMaximumWidth(9*ww);
800 _adviseRecoSpinBox->setMaximumWidth(9*ww);
801
802 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
803 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
804 aLayout->addWidget(_obsRateComboBox, 1, 1);
805 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
806 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
807 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
808 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
809 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
810 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,20);
811 aLayout->addWidget(new QLabel(""), 5, 1);
812 aLayout->setRowStretch(6, 999);
813
814 agroup->setLayout(aLayout);
815
816 // Miscellaneous
817 // -------------
818 QGridLayout* rLayout = new QGridLayout;
819 rLayout->setColumnMinimumWidth(0,14*ww);
820 _perfIntrComboBox->setMaximumWidth(9*ww);
821 _miscPortLineEdit->setMaximumWidth(9*ww);
822
823 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
824 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
825 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1, 7);
826 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
827 rLayout->addWidget(_perfIntrComboBox, 2, 1);
828 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
829 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
830 rLayout->addWidget(new QLabel("Port"), 4, 0);
831 rLayout->addWidget(_miscPortLineEdit, 4, 1);
832 rLayout->addWidget(new QLabel(""), 5, 1);
833 rLayout->setRowStretch(6, 999);
834
835 rgroup->setLayout(rLayout);
836
837 // PPP
838 // ---
839 _pppWidgets._nmeaPort->setMaximumWidth(8*ww);
840 _pppWidgets._dataSource->setMaximumWidth(20*ww);
841 _pppWidgets._corrMount->setMaximumWidth(20*ww);
842
843 QGridLayout* pppLayout1 = new QGridLayout();
844 int ir = 0;
845 pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
846 ++ir;
847 pppLayout1->addWidget(new QLabel("Data source"), ir, 0);
848 pppLayout1->addWidget(_pppWidgets._dataSource, ir, 1);
849//pppLayout1->addItem(new QSpacerItem(4*ww, 0), ir, 2);
850 pppLayout1->addWidget(new QLabel(" RINEX Obs file(s)"), ir, 3);
851 pppLayout1->addWidget(_pppWidgets._rinexObs, ir, 4);
852 ++ir;
853 pppLayout1->addWidget(new QLabel(" RINEX Nav file(s)"), ir, 3);
854 pppLayout1->addWidget(_pppWidgets._rinexNav, ir, 4);
855 ++ir;
856 pppLayout1->addWidget(new QLabel("Corrections"), ir, 0);
857 pppLayout1->addWidget(_pppWidgets._corrMount, ir, 1);
858 pppLayout1->addWidget(new QLabel(" Corrections"), ir, 3);
859 pppLayout1->addWidget(_pppWidgets._corrFile, ir, 4);
860 ++ir;
861 pppLayout1->addWidget(new QLabel("Coordinates"), ir, 0);
862 pppLayout1->addWidget(_pppWidgets._crdFile, ir, 1);
863 pppLayout1->addWidget(new QLabel(" Logfile"), ir, 3);
864 pppLayout1->addWidget(_pppWidgets._logFile, ir, 4);
865 ++ir;
866 pppLayout1->addWidget(new QLabel("ANTEX file"), ir, 0);
867 pppLayout1->addWidget(_pppWidgets._antexFile, ir, 1);
868
869 pppLayout1->addWidget(new QLabel(" NMEA file"), ir, 3);
870 pppLayout1->addWidget(_pppWidgets._nmeaFile, ir, 4);
871 pppLayout1->addWidget(new QLabel(" Port"), ir, 5);
872 pppLayout1->addWidget(_pppWidgets._nmeaPort, ir, 6);
873 ++ir;
874 pppLayout1->addWidget(new QLabel(" SNX TRO file"), ir, 3);
875 pppLayout1->addWidget(_pppWidgets._snxtroFile, ir, 4);
876 pppLayout1->addWidget(new QLabel(" Sampling"), ir, 5);
877 pppLayout1->addWidget(_pppWidgets._snxtroSampl, ir, 6);
878 ++ir;
879 pppLayout1->setRowStretch(ir, 999);
880
881 pppGroup1->setLayout(pppLayout1);
882
883
884 _pppWidgets._dataSource->setWhatsThis(tr("<p>Select real-time PPP from 'Real-Time Streams' or post processing PPP from 'RINEX Files'.</p><p><ul><li>Real-time PPP requires that you pull an RTCM stream carrying GNSS observations plus a stream providing corrections to broadcast ephemeris. If the observations stream does not contian broadcast ephemeris then you must in addition pull a broadcast ephemeris stream like 'RTCM3EPH' from NTRIP broadcaster www.igs-ip.net.</li><li>Post processing PPP requires RINEX observation files, RINEX navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as beforehand saved with BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
885
886 _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p>"));
887
888 _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. The 'Coordinates' file must contain one record per station with the following parameters separated by blank characters:<p><ul><li>Either<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode) or</li><li>the first four characters of the RINEX observations file (when in post processing PPP mode).</li></ul>This parameter is mandatory. BNC will carry out PPP solutions only for those stations which are listed here.</li><li>Approximate X,Y,Z coordinate components of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>Nort, East and Up component of antenna excentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
889
890
891 _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
892
893 _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX observations file(s).</p>"));
894
895 _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX navigation file(s).</p>"));
896
897 _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file(s) as beforehand saved using BNC.</p>"));
898
899 _pppWidgets._logFile->setWhatsThis(tr("<p>Specify the path to daily PPP logfiles using e.g. the following syntax (example):</p><p> ./PPP_$(STATION)_$(DATE).log</p><p>BNC will produce one daily PPP logfile per station. Variable $(STATION) stands for the affected station and $(DATE) stands for the date.</p>"));
900
901 _pppWidgets._nmeaFile->setWhatsThis(tr("<p>Specify the path to daily NMEA files using e.g. the following syntax (example):</p><p> ./PPP_$(STATION)_$(DATE).nmea</p><p>BNC will produce one daily NMEA file per station, mainly to save NMEA GGA sentences from the PPP solution. Variable $(STATION) stands for the affected station and $(DATE) stands for the date.</p>"));
902
903 _pppWidgets._nmeaPort->setWhatsThis(tr("<p> </p>"));
904
905 _pppWidgets._snxtroFile->setWhatsThis(tr("<p>Specify the path to daily SINEX Troposphere files using e.g. the following syntax (example):</p><p> ./PPP_$(STATION)_$(DATE).tro</p><p>BNC will produce one daily troposphere file per station to save troposphere parameters from the PPP solution in SINEX Troposphere format. Variable $(STATION) stands for the affected station and $(DATE) stands for the date.</p>"));
906
907 _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for estimating troposphere paramers.</p>"));
908
909 QVBoxLayout* pppLayout2 = new QVBoxLayout();
910 pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
911 pppLayout2->addWidget(_pppWidgets._staTable, 99);
912 QHBoxLayout* pppLayout2sub = new QHBoxLayout();
913 pppLayout2sub->addWidget(_pppWidgets._addStaButton);
914 pppLayout2sub->addWidget(_pppWidgets._delStaButton);
915 pppLayout2sub->addStretch(99);
916
917 pppLayout2->addLayout(pppLayout2sub);
918
919 pppGroup2->setLayout(pppLayout2);
920
921 QGridLayout* pppLayout3 = new QGridLayout();
922 ir = 0;
923 pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
924 ++ir;
925 pppLayout3->addWidget(new QLabel("GPS LCs"), ir, 0, Qt::AlignLeft);
926 pppLayout3->addWidget(_pppWidgets._lcGPS, ir, 1);
927 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 2);
928 pppLayout3->addWidget(new QLabel("Sigma C1"), ir, 3, Qt::AlignLeft);
929 pppLayout3->addWidget(_pppWidgets._sigmaC1, ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
930 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 5);
931 pppLayout3->addWidget(new QLabel("Sigma L1"), ir, 6, Qt::AlignLeft);
932 pppLayout3->addWidget(_pppWidgets._sigmaL1, ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
933 ++ir;
934 pppLayout3->addWidget(new QLabel("GLONASS LCs"), ir, 0, Qt::AlignLeft);
935 pppLayout3->addWidget(_pppWidgets._lcGLONASS, ir, 1);
936 pppLayout3->addWidget(new QLabel("Max Res C1"), ir, 3, Qt::AlignLeft);
937 pppLayout3->addWidget(_pppWidgets._maxResC1, ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
938 pppLayout3->addWidget(new QLabel("Max Res L1"), ir, 6, Qt::AlignLeft);
939 pppLayout3->addWidget(_pppWidgets._maxResL1, ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
940 ++ir;
941 pppLayout3->addWidget(new QLabel("Galileo LCs"), ir, 0, Qt::AlignLeft);
942 pppLayout3->addWidget(_pppWidgets._lcGalileo, ir, 1);
943 pppLayout3->addWidget(new QLabel("Ele Wgt Code"), ir, 3, Qt::AlignLeft);
944 pppLayout3->addWidget(_pppWidgets._eleWgtCode, ir, 4);
945 pppLayout3->addWidget(new QLabel("Ele Wgt Phase"), ir, 6, Qt::AlignLeft);
946 pppLayout3->addWidget(_pppWidgets._eleWgtPhase, ir, 7);
947 ++ir;
948 pppLayout3->addWidget(new QLabel("Wait for corrections"), ir, 0, Qt::AlignLeft);
949 pppLayout3->addWidget(_pppWidgets._corrWaitTime, ir, 1);
950 pppLayout3->addWidget(new QLabel("Min # of Obs"), ir, 3, Qt::AlignLeft);
951 pppLayout3->addWidget(_pppWidgets._minObs, ir, 4);
952 pppLayout3->addWidget(new QLabel("Min Elevation"), ir, 6, Qt::AlignLeft);
953 pppLayout3->addWidget(_pppWidgets._minEle, ir, 7);
954 ++ir;
955 pppLayout3->addWidget(new QLabel("Seeding (seconds)"), ir, 0, Qt::AlignLeft);
956 pppLayout3->addWidget(_pppWidgets._seedingTime, ir, 1);
957 ++ir;
958 pppLayout3->addWidget(new QLabel(""), ir, 8);
959 pppLayout3->setColumnStretch(8, 999);
960 ++ir;
961 pppLayout3->addWidget(new QLabel(""), ir, 1);
962 pppLayout3->setRowStretch(ir, 999);
963
964 pppGroup3->setLayout(pppLayout3);
965
966 // ------------------------
967 connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
968 _pppWidgets._mapSpeedSlider->setMinimumWidth(28*ww);
969
970 QGridLayout* pppLayout4 = new QGridLayout();
971 ir = 0;
972 pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
973 ++ir;
974 pppLayout4->addWidget(new QLabel("PPP Plot"), ir, 0, Qt::AlignLeft);
975 pppLayout4->addWidget(_pppWidgets._plotCoordinates, ir, 1, Qt::AlignLeft);
976 pppLayout4->addWidget(new QLabel("Mountpoint"), ir, 2, 1, 10, Qt::AlignLeft);
977 ++ir;
978 pppLayout4->addWidget(new QLabel("Track map"), ir, 0, Qt::AlignLeft);
979 pppLayout4->addWidget(_pppWidgets._mapWinButton, ir, 1, Qt::AlignLeft);
980 pppLayout4->addWidget(new QLabel("OSM"), ir, 2, Qt::AlignLeft);
981 pppLayout4->addWidget(_pppWidgets._useOpenStreetMap, ir, 3, Qt::AlignLeft);
982 pppLayout4->addWidget(new QLabel("Google"), ir, 3, Qt::AlignRight);
983 pppLayout4->addWidget(_pppWidgets._useGoogleMap, ir, 4, Qt::AlignLeft);
984 ++ir;
985 pppLayout4->addWidget(new QLabel("Dot-properties"), ir, 0, Qt::AlignLeft);
986 pppLayout4->addWidget(_pppWidgets._mapWinDotSize, ir, 1, Qt::AlignLeft);
987 pppLayout4->addWidget(new QLabel("Size "), ir, 2, Qt::AlignLeft);
988 pppLayout4->addWidget(_pppWidgets._mapWinDotColor, ir, 3, Qt::AlignLeft);
989 pppLayout4->addWidget(new QLabel("Color"), ir, 4, Qt::AlignLeft);
990 ++ir;
991 pppLayout4->addWidget(new QLabel("Post-processing speed"), ir, 0, Qt::AlignLeft);
992 pppLayout4->addWidget(_pppWidgets._mapSpeedSlider, ir, 1, 1, 20, Qt::AlignLeft);
993 ++ir;
994 pppLayout4->addWidget(new QLabel(""), ir, 1);
995 pppLayout4->setRowStretch(ir, 999);
996
997 pppGroup4->setLayout(pppLayout4);
998
999 // Reqc Processing
1000 // ---------------
1001 _reqcActionComboBox = new QComboBox();
1002 _reqcActionComboBox->setEditable(false);
1003 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1004 int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1005 if (ik != -1) {
1006 _reqcActionComboBox->setCurrentIndex(ik);
1007 }
1008 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1009 this, SLOT(slotBncTextChanged()));
1010
1011 QGridLayout* reqcLayout = new QGridLayout;
1012 _reqcActionComboBox->setMinimumWidth(15*ww);
1013 _reqcActionComboBox->setMaximumWidth(20*ww);
1014
1015 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1016 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1017 _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to an input observation file in RINEX v2 or v3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1018
1019 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1020 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1021 _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to an input navigation file in RINEX v2 or v3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1022
1023 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1024 _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX observation output file.</p><p>Default is an empty option field, meaning that no RINEX observation output file will be produced.</p>"));
1025
1026 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1027 _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX navigation output file.</p><p>Default is an empty option field, meaning that no RINEX navigation output file will be produced.</p>"));
1028
1029 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1030 _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1031
1032 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1033 _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1034
1035 _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1036 _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify the observation signals to be used for that. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for fequency and tracking mode or channel must be seperated by ampersand character '&'. Specifications for each navigation systems must be seperated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is an empty option field, meaning that BNC will not produces.</p>"));
1037
1038 connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1039 this, SLOT(slotBncTextChanged()));
1040
1041 _reqcLogSummaryOnly = new QCheckBox();
1042 _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1043 _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile contents to a small summary.</p><p>Tick 'Summary only' to suppress a full logfile output and produce a logfile containing only summary information.</p>"));
1044
1045 ir = 0;
1046 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1047 ++ir;
1048 reqcLayout->addWidget(new QLabel("Action"), ir, 0);
1049 reqcLayout->addWidget(_reqcActionComboBox, ir, 1);
1050 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1051 _reqcEditOptionButton->setMinimumWidth(15*ww);
1052 _reqcEditOptionButton->setMaximumWidth(20*ww);
1053
1054 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3);
1055 ++ir;
1056 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0);
1057 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1);
1058 _reqcObsFileChooser->setMaximumWidth(40*ww);
1059 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1060 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3);
1061 _reqcNavFileChooser->setMaximumWidth(40*ww);
1062 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1063 ++ir;
1064 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0);
1065 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1);
1066 _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1067 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1068 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3);
1069 _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1070 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1071 ++ir;
1072 reqcLayout->addWidget(new QLabel("Logfile"), ir, 0);
1073 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1);
1074 _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1075 reqcLayout->addWidget(new QLabel(" Summary only"), ir, 2);
1076 reqcLayout->addWidget(_reqcLogSummaryOnly, ir, 3);
1077 ++ir;
1078 reqcLayout->addWidget(new QLabel("Plots for signals"), ir, 0);
1079 reqcLayout->addWidget(_reqcSkyPlotSignals, ir, 1);
1080 _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1081 ++ir;
1082 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0);
1083 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1);
1084 _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1085 ++ir;
1086 reqcLayout->setRowStretch(ir, 999);
1087
1088 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1089 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1090
1091 reqcgroup->setLayout(reqcLayout);
1092
1093 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1094 this, SLOT(slotReqcEditOption()));
1095
1096 QGridLayout* sp3CompLayout = new QGridLayout;
1097
1098 _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1099 _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1100 _sp3CompFileChooser->setWhatsThis(tr("Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma."));
1101 _sp3CompFileChooser->setMinimumWidth(15*ww);
1102 _sp3CompFileChooser->setMaximumWidth(40*ww);
1103
1104 _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1105 _sp3CompExclude->setMinimumWidth(15*ww);
1106 _sp3CompExclude->setMaximumWidth(15*ww);
1107 _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparision. Example:<p>G04,G31,R</p><p>This excludes GPS satellites RPN 4 and 31 as well as all GLONASS satellites from the comparision.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1108
1109 _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1110 _sp3CompLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1111 _sp3CompLogLineEdit->setMinimumWidth(15*ww);
1112 _sp3CompLogLineEdit->setMaximumWidth(15*ww);
1113
1114 ir = 0;
1115 sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"), ir, 0, 1, 40);
1116 ++ir;
1117 sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"), ir, 0, Qt::AlignLeft);
1118 sp3CompLayout->addWidget(_sp3CompFileChooser, ir, 1, 1, 20);
1119 ++ir;
1120 sp3CompLayout->addWidget(new QLabel("Exclude satellites"), ir, 0, Qt::AlignLeft);
1121 sp3CompLayout->addWidget(_sp3CompExclude, ir, 1, Qt::AlignRight);
1122 ++ir;
1123 sp3CompLayout->addWidget(new QLabel("Logfile"), ir, 0, Qt::AlignLeft);
1124 sp3CompLayout->addWidget(_sp3CompLogLineEdit, ir, 1, Qt::AlignRight);
1125 ++ir;
1126 sp3CompLayout->addWidget(new QLabel(""), ir, 1);
1127 ++ir;
1128 sp3CompLayout->setRowStretch(ir, 999);
1129
1130 sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1131 sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1132
1133 sp3CompGroup->setLayout(sp3CompLayout);
1134
1135 connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1136 this, SLOT(slotBncTextChanged()));
1137
1138 // Combine Corrections
1139 // -------------------
1140 QGridLayout* cmbLayout = new QGridLayout;
1141
1142 populateCmbTable();
1143 cmbLayout->addWidget(_cmbTable, 0, 0, 8, 3);
1144 cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1145 cmbLayout->addWidget(addCmbRowButton, 2, 6);
1146 cmbLayout->addWidget(delCmbRowButton, 2, 7);
1147 cmbLayout->addWidget(new QLabel("Method"), 3, 6, Qt::AlignRight);
1148 cmbLayout->addWidget(_cmbMethodComboBox, 3, 7);
1149 cmbLayout->addWidget(new QLabel(" Maximal residuum"), 4, 6, Qt::AlignRight);
1150 cmbLayout->addWidget(_cmbMaxresLineEdit, 4, 7, Qt::AlignRight);
1151 cmbLayout->addWidget(new QLabel("Sampling"), 5, 6, Qt::AlignRight);
1152 cmbLayout->addWidget(_cmbSamplSpinBox, 5, 7);
1153 cmbLayout->addWidget(new QLabel(" Use GLONASS"), 6, 6, Qt::AlignRight);
1154 cmbLayout->addWidget(_cmbUseGlonass, 6, 7);
1155 cmbLayout->setRowStretch(7, 999);
1156
1157 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1158 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1159
1160 cmbgroup->setLayout(cmbLayout);
1161
1162 // Upload Layout (Clocks)
1163 // ----------------------
1164 QGridLayout* uploadHlpLayout = new QGridLayout();
1165
1166 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1167 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1168 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1169
1170 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1171 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1172 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1173 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1174 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1175 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1176 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1177 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1178 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1179 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1180 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1181 uploadHlpLayout->addWidget(new QLabel("ANTEX file"), 1, 0, Qt::AlignLeft);
1182 uploadHlpLayout->addWidget(_uploadAntexFile, 1, 1, 1, 4);
1183
1184 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1185 populateUploadTable();
1186
1187 uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1188 uploadLayout->addWidget(_uploadTable);
1189 uploadLayout->addLayout(uploadHlpLayout);
1190
1191 uploadgroup->setLayout(uploadLayout);
1192
1193 // Upload Layout (Ephemeris)
1194 // -------------------------
1195 QGridLayout* uploadLayoutEph = new QGridLayout;
1196
1197 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1198 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1199 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1200 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1201
1202 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1203 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1204 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1205 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1206 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1207 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1208 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1209 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1210 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1211 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1212 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1213 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1214 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1215 uploadLayoutEph->setRowStretch(5, 999);
1216
1217 uploadEphgroup->setLayout(uploadLayoutEph);
1218
1219 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1220 this, SLOT(slotBncTextChanged()));
1221
1222 // Main Layout
1223 // -----------
1224 QGridLayout* mLayout = new QGridLayout;
1225 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1226 mLayout->addWidget(_aogroup, 0,0);
1227 mLayout->addWidget(_mountPointsTable, 1,0);
1228 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1229 mLayout->addWidget(_loggroup, 2,0);
1230
1231 _canvas->setLayout(mLayout);
1232
1233 // WhatsThis
1234 // ---------
1235 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1236 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1237 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1238 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1239 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1240 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1241 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1242 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1243 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1244 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1245 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1246 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1247 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1248 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1249 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1250 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1251 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1252 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1253 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1254 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1255 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1256 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1257 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1258 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1259 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1260 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1261 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1262 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1263 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1264 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1265 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster together with an approximation for the height. The default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1266 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1267 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1268 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1269 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1270 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1271 _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Default is priority list 'CWPX_?'.</p>"));
1272 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1273 _miscPortLineEdit->setWhatsThis(tr("BNC can output an incoming stream through a TCP/IP port of your local host. Specify a port number here to activate this function."));
1274 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1275 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream contents the receiver may use it for Differential GNSS, Precise Point Positioning or any other purpose supported by the firmware.</p>"));
1276 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1277 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1278 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1279 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1280 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1281 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1282 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtural Reference Station' (VRS) concept which requires the receiver to send approximate position information to the NTRIP Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the NTRIP broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GPGGA or GNGGA from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' if you want BNC to produce and upload one initial GPGGA NMEA message to the NTRIP broadcaster because your serial connected receiver doesn't generate these messages.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'ntrip' stream attribute set to 'yes'. This attribute is either extracted from the NTRIP broadcaster's sourcetable or introduced by the user through editing the BNC configuration file.</p>"));
1283 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1284 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced through 'Mountpoint'. Together with the latitude and longitude from the NTRIP broadcaster sourcetable the height information is used to build one initial GPGGA message to be sent to the NTRIP broadcaster.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual'.</p>"));
1285 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX v2 or v3 files or to perform a quality check and 'Analyze' the data following UNAVCO's famous 'teqc' program.</p>"));
1286 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1287 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1288 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.</p><p>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1289 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1290 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval for the Clocks. The clock corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1291 _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination."));
1292 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1293 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>When saving SP3 file contents and/or referring correctors to the satellite's Center of Mass (CoM), an offset has to be applied because correctors originally refer to the satellite's Antenna Phase Center (APC). Antenna offsets are available from the IGS 'ANTEX file' which can be introduced through specifying its path. If you don't specify an 'ANTEX file' path, the SP3 file contents and the orbit and clock correctors will be referred to satellite APCs and not to CoM.</p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1294
1295 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1296 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1297 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1298 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1299 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1300 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1301 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1302 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1303 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1304 _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead of Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify the 'ANTEX file' path if you want to save the stream contents in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file contents as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1305 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1306 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1307 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1308 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1309 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1310 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1311 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1312 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1313 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1314 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1315 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1316
1317 // Enable/Disable all Widgets
1318 // --------------------------
1319 slotBncTextChanged();
1320 enableStartStop();
1321
1322 // Auto start
1323 // ----------
1324 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1325 slotStart();
1326 }
1327}
1328
1329// Destructor
1330////////////////////////////////////////////////////////////////////////////
1331bncWindow::~bncWindow() {
1332 delete _caster; BNC_CORE->setCaster(0);
1333 delete _casterEph;
1334}
1335
1336//
1337////////////////////////////////////////////////////////////////////////////
1338void bncWindow::populateMountPointsTable() {
1339
1340 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1341 _mountPointsTable->removeRow(iRow);
1342 }
1343
1344 bncSettings settings;
1345
1346 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1347 int iRow = 0;
1348 while (it.hasNext()) {
1349 QStringList hlp = it.next().split(" ");
1350 if (hlp.size() < 5) continue;
1351 _mountPointsTable->insertRow(iRow);
1352
1353 QUrl url(hlp[0]);
1354
1355 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1356 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1357 QString nmea(hlp[4]);
1358 if (hlp[5] == "S") {
1359 fullPath = hlp[0].replace(0,2,"");
1360 }
1361 QString ntripVersion = "2";
1362 if (hlp.size() >= 6) {
1363 ntripVersion = (hlp[5]);
1364 }
1365
1366 QTableWidgetItem* it;
1367 it = new QTableWidgetItem(url.userInfo());
1368 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1369 _mountPointsTable->setItem(iRow, 0, it);
1370
1371 it = new QTableWidgetItem(fullPath);
1372 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1373 _mountPointsTable->setItem(iRow, 1, it);
1374
1375 it = new QTableWidgetItem(format);
1376 _mountPointsTable->setItem(iRow, 2, it);
1377
1378 if (nmea == "yes") {
1379 it = new QTableWidgetItem(latitude);
1380 _mountPointsTable->setItem(iRow, 3, it);
1381 it = new QTableWidgetItem(longitude);
1382 _mountPointsTable->setItem(iRow, 4, it);
1383 } else {
1384 it = new QTableWidgetItem(latitude);
1385 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1386 _mountPointsTable->setItem(iRow, 3, it);
1387 it = new QTableWidgetItem(longitude);
1388 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1389 _mountPointsTable->setItem(iRow, 4, it);
1390 }
1391
1392 it = new QTableWidgetItem(nmea);
1393 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1394 _mountPointsTable->setItem(iRow, 5, it);
1395
1396 it = new QTableWidgetItem(ntripVersion);
1397 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1398 _mountPointsTable->setItem(iRow, 6, it);
1399
1400 bncTableItem* bncIt = new bncTableItem();
1401 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1402 _mountPointsTable->setItem(iRow, 7, bncIt);
1403
1404 iRow++;
1405 }
1406
1407 _mountPointsTable->sortItems(1);
1408
1409 enableStartStop();
1410}
1411
1412// Retrieve Table
1413////////////////////////////////////////////////////////////////////////////
1414void bncWindow::slotAddMountPoints() {
1415
1416 bncSettings settings;
1417 QString proxyHost = settings.value("proxyHost").toString();
1418 int proxyPort = settings.value("proxyPort").toInt();
1419 if (proxyHost != _proxyHostLineEdit->text() ||
1420 proxyPort != _proxyPortLineEdit->text().toInt()) {
1421 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1422 "changed. Use the new ones?",
1423 QMessageBox::Yes, QMessageBox::No,
1424 QMessageBox::NoButton);
1425 if (iRet == QMessageBox::Yes) {
1426 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1427 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1428 }
1429 }
1430
1431 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1432 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1433
1434 QMessageBox msgBox;
1435 msgBox.setIcon(QMessageBox::Question);
1436 msgBox.setWindowTitle("Add Stream");
1437 msgBox.setText("Add stream(s) coming from:");
1438
1439 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1440 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1441 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1442 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1443 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1444
1445 msgBox.exec();
1446
1447 if (msgBox.clickedButton() == buttonNtrip) {
1448 bncTableDlg* dlg = new bncTableDlg(this);
1449 dlg->move(this->pos().x()+50, this->pos().y()+50);
1450 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1451 this, SLOT(slotNewMountPoints(QStringList*)));
1452 dlg->exec();
1453 delete dlg;
1454 } else if (msgBox.clickedButton() == buttonIP) {
1455 bncIpPort* ipp = new bncIpPort(this);
1456 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1457 this, SLOT(slotNewMountPoints(QStringList*)));
1458 ipp->exec();
1459 delete ipp;
1460 } else if (msgBox.clickedButton() == buttonUDP) {
1461 bncUdpPort* udp = new bncUdpPort(this);
1462 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1463 this, SLOT(slotNewMountPoints(QStringList*)));
1464 udp->exec();
1465 delete udp;
1466 } else if (msgBox.clickedButton() == buttonSerial) {
1467 bncSerialPort* sep = new bncSerialPort(this);
1468 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1469 this, SLOT(slotNewMountPoints(QStringList*)));
1470 sep->exec();
1471 delete sep;
1472 } else if (msgBox.clickedButton() == buttonCancel) {
1473 // Cancel
1474 }
1475
1476 enableStartStop();
1477}
1478
1479// Delete Selected Mount Points
1480////////////////////////////////////////////////////////////////////////////
1481void bncWindow::slotDeleteMountPoints() {
1482
1483 int nRows = _mountPointsTable->rowCount();
1484 bool flg[nRows];
1485 for (int iRow = 0; iRow < nRows; iRow++) {
1486 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1487 flg[iRow] = true;
1488 }
1489 else {
1490 flg[iRow] = false;
1491 }
1492 }
1493 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1494 if (flg[iRow]) {
1495 _mountPointsTable->removeRow(iRow);
1496 }
1497 }
1498 _actDeleteMountPoints->setEnabled(false);
1499
1500 enableStartStop();
1501}
1502
1503// New Mount Points Selected
1504////////////////////////////////////////////////////////////////////////////
1505void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1506 int iRow = 0;
1507 QListIterator<QString> it(*mountPoints);
1508 while (it.hasNext()) {
1509 QStringList hlp = it.next().split(" ");
1510 QUrl url(hlp[0]);
1511 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1512 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1513 QString nmea(hlp[4]);
1514 if (hlp[5] == "S") {
1515 fullPath = hlp[0].replace(0,2,"");
1516 }
1517 QString ntripVersion = "2";
1518 if (hlp.size() >= 6) {
1519 ntripVersion = (hlp[5]);
1520 }
1521
1522 _mountPointsTable->insertRow(iRow);
1523
1524 QTableWidgetItem* it;
1525 it = new QTableWidgetItem(url.userInfo());
1526 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1527 _mountPointsTable->setItem(iRow, 0, it);
1528
1529 it = new QTableWidgetItem(fullPath);
1530 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1531 _mountPointsTable->setItem(iRow, 1, it);
1532
1533 it = new QTableWidgetItem(format);
1534 _mountPointsTable->setItem(iRow, 2, it);
1535
1536 if (nmea == "yes") {
1537 it = new QTableWidgetItem(latitude);
1538 _mountPointsTable->setItem(iRow, 3, it);
1539 it = new QTableWidgetItem(longitude);
1540 _mountPointsTable->setItem(iRow, 4, it);
1541 } else {
1542 it = new QTableWidgetItem(latitude);
1543 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1544 _mountPointsTable->setItem(iRow, 3, it);
1545 it = new QTableWidgetItem(longitude);
1546 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1547 _mountPointsTable->setItem(iRow, 4, it);
1548 }
1549
1550 it = new QTableWidgetItem(nmea);
1551 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1552 _mountPointsTable->setItem(iRow, 5, it);
1553
1554 it = new QTableWidgetItem(ntripVersion);
1555 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1556 _mountPointsTable->setItem(iRow, 6, it);
1557
1558 bncTableItem* bncIt = new bncTableItem();
1559 _mountPointsTable->setItem(iRow, 7, bncIt);
1560
1561 iRow++;
1562 }
1563 _mountPointsTable->hideColumn(0);
1564 _mountPointsTable->sortItems(1);
1565 delete mountPoints;
1566
1567 enableStartStop();
1568}
1569
1570// Save Options (serialize)
1571////////////////////////////////////////////////////////////////////////////
1572void bncWindow::slotSaveOptions() {
1573 saveOptions();
1574 bncSettings settings;
1575 settings.sync();
1576}
1577
1578// Save Options (memory only)
1579////////////////////////////////////////////////////////////////////////////
1580void bncWindow::saveOptions() {
1581
1582 QStringList mountPoints;
1583 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1584
1585 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1586 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1587 "@" + _mountPointsTable->item(iRow, 1)->text() );
1588
1589 mountPoints.append(url.toString() + " " +
1590 _mountPointsTable->item(iRow, 2)->text()
1591 + " " + _mountPointsTable->item(iRow, 3)->text()
1592 + " " + _mountPointsTable->item(iRow, 4)->text()
1593 + " " + _mountPointsTable->item(iRow, 5)->text()
1594 + " " + _mountPointsTable->item(iRow, 6)->text());
1595 } else {
1596 mountPoints.append(
1597 "//" + _mountPointsTable->item(iRow, 1)->text()
1598 + " " + _mountPointsTable->item(iRow, 2)->text()
1599 + " " + _mountPointsTable->item(iRow, 3)->text()
1600 + " " + _mountPointsTable->item(iRow, 4)->text()
1601 + " " + _mountPointsTable->item(iRow, 5)->text()
1602 + " " + _mountPointsTable->item(iRow, 6)->text());
1603 }
1604 }
1605
1606 QStringList combineStreams;
1607 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1608 QString hlp;
1609 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1610 if (_cmbTable->item(iRow, iCol)) {
1611 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1612 }
1613 }
1614 if (!hlp.isEmpty()) {
1615 combineStreams << hlp;
1616 }
1617 }
1618
1619 QStringList uploadMountpointsOut;
1620 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1621 QString hlp;
1622 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1623 if (_uploadTable->cellWidget(iRow, iCol) &&
1624 (iCol == 3 || iCol == 4 || iCol == 5)) {
1625 if (iCol == 3) {
1626 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1627 hlp += passwd->text() + ",";
1628 }
1629 else if (iCol == 4) {
1630 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1631 hlp += system->currentText() + ",";
1632 }
1633 else if (iCol == 5) {
1634 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1635 QString state; state.setNum(com->checkState());
1636 hlp += state + ",";
1637 }
1638 }
1639 else if (_uploadTable->item(iRow, iCol)) {
1640 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1641 }
1642 }
1643 if (!hlp.isEmpty()) {
1644 uploadMountpointsOut << hlp;
1645 }
1646 }
1647
1648 bncSettings settings;
1649
1650 settings.setValue("startTab", _aogroup->currentIndex());
1651 settings.setValue("statusTab", _loggroup->currentIndex());
1652 settings.setValue("mountPoints", mountPoints);
1653// Network
1654 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1655 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1656 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1657 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1658// General
1659 settings.setValue("logFile", _logFileLineEdit->text());
1660 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1661 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1662 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1663 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1664// RINEX Observations
1665 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1666 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1667 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1668 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1669 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1670 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1671 settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1672// RINEX Ephemeris
1673 settings.setValue("ephPath", _ephPathLineEdit->text());
1674 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1675 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1676 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1677// Broadcast Corrections
1678 settings.setValue("corrPath", _corrPathLineEdit->text());
1679 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1680 settings.setValue("corrPort", _corrPortLineEdit->text());
1681// Feed Engine
1682 settings.setValue("outPort", _outPortLineEdit->text());
1683 settings.setValue("waitTime", _waitTimeSpinBox->value());
1684 settings.setValue("binSampl", _binSamplSpinBox->value());
1685 settings.setValue("outFile", _outFileLineEdit->text());
1686 settings.setValue("outUPort", _outUPortLineEdit->text());
1687// Serial Output
1688 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1689 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1690 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1691 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1692 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1693 settings.setValue("serialParity", _serialParityComboBox->currentText());
1694 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1695 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1696 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1697 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1698// Outages
1699 settings.setValue("obsRate", _obsRateComboBox->currentText());
1700 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1701 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1702 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1703// Miscellaneous
1704 settings.setValue("miscMount", _miscMountLineEdit->text());
1705 settings.setValue("miscPort", _miscPortLineEdit->text());
1706 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1707 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1708// Reqc
1709 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1710 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1711 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1712 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1713 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1714 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1715 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1716 settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1717 settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1718// SP3 Comparison
1719 settings.setValue("sp3CompFile", _sp3CompFileChooser->fileName());
1720 settings.setValue("sp3CompExclude", _sp3CompExclude->text());
1721 settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1722// Combine Corrections
1723 if (!combineStreams.isEmpty()) {
1724 settings.setValue("combineStreams", combineStreams);
1725 }
1726 else {
1727 settings.setValue("combineStreams", "");
1728 }
1729 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1730 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1731 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1732 settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1733// Upload Corrections
1734 if (!uploadMountpointsOut.isEmpty()) {
1735 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1736 }
1737 else {
1738 settings.setValue("uploadMountpointsOut", "");
1739 }
1740 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1741 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1742 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1743 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1744 settings.setValue("uploadAntexFile", _uploadAntexFile->fileName());
1745// Upload Ephemeris
1746 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1747 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1748 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1749 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1750 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1751
1752 if (_caster) {
1753 _caster->readMountPoints();
1754 }
1755
1756 _pppWidgets.saveOptions();
1757}
1758
1759// All get slots terminated
1760////////////////////////////////////////////////////////////////////////////
1761void bncWindow::slotGetThreadsFinished() {
1762 BNC_CORE->slotMessage("All Get Threads Terminated", true);
1763 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
1764 delete _casterEph; _casterEph = 0;
1765 _runningRealTime = false;
1766}
1767
1768// Start It!
1769////////////////////////////////////////////////////////////////////////////
1770void bncWindow::slotStart() {
1771 saveOptions();
1772 if ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1773 _runningPPP = true;
1774 enableStartStop();
1775 _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1776 BNC_CORE->startPPP();
1777 }
1778 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1779 if (_reqcActionComboBox->currentText() == "Analyze") {
1780 _runningQC = true;
1781 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1782 connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1783 reqcAnalyze->start();
1784 }
1785 else {
1786 _runningEdit = true;
1787 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1788 connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1789 reqcEdit->start();
1790 }
1791 enableStartStop();
1792 }
1793 else if (!_sp3CompFileChooser->fileName().isEmpty()) {
1794 _runningSp3Comp = true;
1795 t_sp3Comp* sp3Comp = new t_sp3Comp(this);
1796 connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1797 sp3Comp->start();
1798 enableStartStop();
1799 }
1800 else {
1801 startRealTime();
1802 BNC_CORE->startPPP();
1803 }
1804}
1805
1806// Start Real-Time (Retrieve Data etc.)
1807////////////////////////////////////////////////////////////////////////////
1808void bncWindow::startRealTime() {
1809
1810 _runningRealTime = true;
1811
1812 _bncFigurePPP->reset();
1813
1814 _actDeleteMountPoints->setEnabled(false);
1815
1816 enableStartStop();
1817
1818 _caster = new bncCaster();
1819
1820 BNC_CORE->setCaster(_caster);
1821 BNC_CORE->setPortEph(_outEphPortLineEdit->text().toInt());
1822 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
1823 BNC_CORE->initCombination();
1824
1825 connect(_caster, SIGNAL(getThreadsFinished()),
1826 this, SLOT(slotGetThreadsFinished()));
1827
1828 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
1829 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
1830
1831 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " ("BNC_OS") ==========", true);
1832
1833 bncSettings settings;
1834
1835 QDir rnxdir(settings.value("rnxPath").toString());
1836 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
1837
1838 QString rnx_file = settings.value("rnxScript").toString();
1839 if ( !rnx_file.isEmpty() ) {
1840 QFile rnxfile(settings.value("rnxScript").toString());
1841 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
1842 }
1843
1844 QDir ephdir(settings.value("ephPath").toString());
1845 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
1846
1847 QDir corrdir(settings.value("corrPath").toString());
1848 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
1849
1850 QString advise_file = settings.value("adviseScript").toString();
1851 if ( !advise_file.isEmpty() ) {
1852 QFile advisefile(settings.value("adviseScript").toString());
1853 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
1854 }
1855
1856 _caster->readMountPoints();
1857
1858 _casterEph = new bncEphUploadCaster();
1859 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
1860 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
1861}
1862
1863// Retrieve Data
1864////////////////////////////////////////////////////////////////////////////
1865void bncWindow::slotStop() {
1866 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
1867 QMessageBox::Yes, QMessageBox::No,
1868 QMessageBox::NoButton);
1869 if (iRet == QMessageBox::Yes) {
1870 BNC_CORE->stopPPP();
1871 BNC_CORE->stopCombination();
1872 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
1873 delete _casterEph; _casterEph = 0;
1874 _runningRealTime = false;
1875 _runningPPP = false;
1876 enableStartStop();
1877 }
1878}
1879
1880// Close Application gracefully
1881////////////////////////////////////////////////////////////////////////////
1882void bncWindow::closeEvent(QCloseEvent* event) {
1883
1884 int iRet = QMessageBox::question(this, "Close", "Save Options?",
1885 QMessageBox::Yes, QMessageBox::No,
1886 QMessageBox::Cancel);
1887
1888 if (iRet == QMessageBox::Cancel) {
1889 event->ignore();
1890 return;
1891 }
1892 else if (iRet == QMessageBox::Yes) {
1893 slotSaveOptions();
1894 }
1895
1896 BNC_CORE->stopPPP();
1897
1898 QMainWindow::closeEvent(event);
1899}
1900
1901// User changed the selection of mountPoints
1902////////////////////////////////////////////////////////////////////////////
1903void bncWindow::slotSelectionChanged() {
1904 if (_mountPointsTable->selectedItems().isEmpty()) {
1905 _actDeleteMountPoints->setEnabled(false);
1906 }
1907 else {
1908 _actDeleteMountPoints->setEnabled(true);
1909 }
1910}
1911
1912// Display Program Messages
1913////////////////////////////////////////////////////////////////////////////
1914void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
1915 if (showOnScreen ) {
1916 _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
1917 }
1918}
1919
1920// About Message
1921////////////////////////////////////////////////////////////////////////////
1922void bncWindow::slotAbout() {
1923 new bncAboutDlg(0);
1924}
1925
1926//Flowchart
1927////////////////////////////////////////////////////////////////////////////
1928void bncWindow::slotFlowchart() {
1929 new bncFlowchartDlg(0);
1930}
1931
1932// Help Window
1933////////////////////////////////////////////////////////////////////////////
1934void bncWindow::slotHelp() {
1935 QUrl url;
1936 url.setPath(":bnchelp.html");
1937 new bncHlpDlg(0, url);
1938}
1939
1940// Select Fonts
1941////////////////////////////////////////////////////////////////////////////
1942void bncWindow::slotFontSel() {
1943 bool ok;
1944 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
1945 if (ok) {
1946 bncSettings settings;
1947 settings.setValue("font", newFont.toString());
1948 QApplication::setFont(newFont);
1949 int ww = QFontMetrics(newFont).width('w');
1950 setMinimumSize(60*ww, 80*ww);
1951 resize(60*ww, 80*ww);
1952 }
1953}
1954
1955// Whats This Help
1956void bncWindow::slotWhatsThis() {
1957 QWhatsThis::enterWhatsThisMode();
1958}
1959
1960//
1961////////////////////////////////////////////////////////////////////////////
1962void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
1963 _threads = threads;
1964
1965 _bncFigure->updateMountPoints();
1966 _bncFigureLate->updateMountPoints();
1967
1968 populateMountPointsTable();
1969 bncSettings settings;
1970 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
1971 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
1972 QListIterator<bncGetThread*> iTh(threads);
1973 while (iTh.hasNext()) {
1974 bncGetThread* thread = iTh.next();
1975 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1976 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1977 "@" + _mountPointsTable->item(iRow, 1)->text() );
1978 if (url == thread->mountPoint() &&
1979 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
1980 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
1981 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
1982 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
1983 _bncFigure, SLOT(slotNewData(QByteArray, double)));
1984 connect(thread, SIGNAL(newBytes(QByteArray, double)),
1985 _bncFigure, SLOT(slotNewData(QByteArray, double)));
1986 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
1987 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
1988 connect(thread, SIGNAL(newLatency(QByteArray, double)),
1989 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
1990 break;
1991 }
1992 }
1993 }
1994}
1995
1996//
1997////////////////////////////////////////////////////////////////////////////
1998void bncWindow::CreateMenu() {
1999 // Create Menus
2000 // ------------
2001 _menuFile = menuBar()->addMenu(tr("&File"));
2002 _menuFile->addAction(_actFontSel);
2003 _menuFile->addSeparator();
2004 _menuFile->addAction(_actSaveOpt);
2005 _menuFile->addSeparator();
2006 _menuFile->addAction(_actQuit);
2007
2008 _menuHlp = menuBar()->addMenu(tr("&Help"));
2009 _menuHlp->addAction(_actHelp);
2010 _menuHlp->addAction(_actFlowchart);
2011 _menuHlp->addAction(_actAbout);
2012}
2013
2014// Toolbar
2015////////////////////////////////////////////////////////////////////////////
2016void bncWindow::AddToolbar() {
2017 QToolBar* toolBar = new QToolBar;
2018 addToolBar(Qt::BottomToolBarArea, toolBar);
2019 toolBar->setMovable(false);
2020 toolBar->addAction(_actAddMountPoints);
2021 toolBar->addAction(_actDeleteMountPoints);
2022 toolBar->addAction(_actMapMountPoints);
2023 toolBar->addAction(_actStart);
2024 toolBar->addAction(_actStop);
2025 toolBar->addWidget(new QLabel(" "));
2026 toolBar->addAction(_actwhatsthis);
2027}
2028
2029// About
2030////////////////////////////////////////////////////////////////////////////
2031bncAboutDlg::bncAboutDlg(QWidget* parent) :
2032 QDialog(parent) {
2033
2034 QTextBrowser* tb = new QTextBrowser;
2035 QUrl url; url.setPath(":bncabout.html");
2036 tb->setSource(url);
2037 tb->setReadOnly(true);
2038
2039 int ww = QFontMetrics(font()).width('w');
2040 QPushButton* _closeButton = new QPushButton("Close");
2041 _closeButton->setMaximumWidth(10*ww);
2042 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2043
2044 QGridLayout* dlgLayout = new QGridLayout();
2045 QLabel* img = new QLabel();
2046 img->setPixmap(QPixmap(":ntrip-logo.png"));
2047 dlgLayout->addWidget(img, 0,0);
2048 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2049 dlgLayout->addWidget(tb,1,0,1,2);
2050 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2051
2052 setLayout(dlgLayout);
2053 resize(60*ww, 60*ww);
2054 setWindowTitle("About BNC");
2055 show();
2056}
2057
2058//
2059////////////////////////////////////////////////////////////////////////////
2060bncAboutDlg::~bncAboutDlg() {
2061};
2062
2063// Flowchart
2064////////////////////////////////////////////////////////////////////////////
2065bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2066 QDialog(parent) {
2067
2068 int ww = QFontMetrics(font()).width('w');
2069 QPushButton* _closeButton = new QPushButton("Close");
2070 _closeButton->setMaximumWidth(10*ww);
2071 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2072
2073 QGridLayout* dlgLayout = new QGridLayout();
2074 QLabel* img = new QLabel();
2075 img->setPixmap(QPixmap(":bncflowchart.png"));
2076 dlgLayout->addWidget(img, 0,0);
2077 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2078
2079 setLayout(dlgLayout);
2080 setWindowTitle("Flow Chart");
2081 show();
2082}
2083
2084//
2085////////////////////////////////////////////////////////////////////////////
2086bncFlowchartDlg::~bncFlowchartDlg() {
2087};
2088
2089// Enable/Disable Widget (and change its color)
2090////////////////////////////////////////////////////////////////////////////
2091void bncWindow::enableWidget(bool enable, QWidget* widget) {
2092 const static QPalette paletteWhite(QColor(255, 255, 255));
2093 const static QPalette paletteGray(QColor(230, 230, 230));
2094
2095 widget->setEnabled(enable);
2096 if (enable) {
2097 widget->setPalette(paletteWhite);
2098 }
2099 else {
2100 widget->setPalette(paletteGray);
2101 }
2102}
2103
2104// Bnc Text
2105////////////////////////////////////////////////////////////////////////////
2106void bncWindow::slotBncTextChanged(){
2107
2108 bool enable = true;
2109
2110 // Proxy
2111 //------
2112 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2113 enable = !_proxyHostLineEdit->text().isEmpty();
2114 enableWidget(enable, _proxyPortLineEdit);
2115 }
2116
2117 // RINEX Observations
2118 // ------------------
2119 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2120 enable = !_rnxPathLineEdit->text().isEmpty();
2121 enableWidget(enable, _rnxIntrComboBox);
2122 enableWidget(enable, _rnxSamplSpinBox);
2123 enableWidget(enable, _rnxSkelLineEdit);
2124 enableWidget(enable, _rnxScrpLineEdit);
2125 enableWidget(enable, _rnxV3CheckBox);
2126 if (!_rnxV3CheckBox->isChecked()) {
2127 enableWidget(enable, _rnxV2Priority);
2128 }
2129 else {
2130 enableWidget(false, _rnxV2Priority);
2131 }
2132 }
2133
2134 // RINEX Observations, Signal Priority
2135 // -----------------------------------
2136 if (sender() == 0 || sender() == _rnxV3CheckBox) {
2137 if (!_rnxV3CheckBox->isChecked()) {
2138 enableWidget(true, _rnxV2Priority);
2139 }
2140 else {
2141 enableWidget(false, _rnxV2Priority);
2142 }
2143 }
2144
2145 // RINEX Ephemeris
2146 // ---------------
2147 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2148 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2149 enableWidget(enable, _ephIntrComboBox);
2150 enableWidget(enable, _ephV3CheckBox);
2151 }
2152
2153 // Broadcast Corrections
2154 // ---------------------
2155 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2156 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2157 enableWidget(enable, _corrIntrComboBox);
2158 }
2159
2160 // Feed Engine
2161 // -----------
2162 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2163 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2164 enableWidget(enable, _waitTimeSpinBox);
2165 enableWidget(enable, _binSamplSpinBox);
2166 }
2167
2168 // Serial Output
2169 // -------------
2170 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2171 sender() == _serialAutoNMEAComboBox) {
2172 enable = !_serialMountPointLineEdit->text().isEmpty();
2173 enableWidget(enable, _serialPortNameLineEdit);
2174 enableWidget(enable, _serialBaudRateComboBox);
2175 enableWidget(enable, _serialParityComboBox);
2176 enableWidget(enable, _serialDataBitsComboBox);
2177 enableWidget(enable, _serialStopBitsComboBox);
2178 enableWidget(enable, _serialFlowControlComboBox);
2179 enableWidget(enable, _serialAutoNMEAComboBox);
2180
2181 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2182 enableWidget(enable2, _serialFileNMEALineEdit);
2183 bool enable3 = enable && _serialAutoNMEAComboBox->currentText() == "Manual";
2184 enableWidget(enable3, _serialHeightNMEALineEdit);
2185 }
2186
2187 // Outages
2188 // -------
2189 if (sender() == 0 || sender() == _obsRateComboBox) {
2190 enable = !_obsRateComboBox->currentText().isEmpty();
2191 enableWidget(enable, _adviseFailSpinBox);
2192 enableWidget(enable, _adviseRecoSpinBox);
2193 enableWidget(enable, _adviseScriptLineEdit);
2194 }
2195
2196 // Miscellaneous
2197 // -------------
2198 if (sender() == 0 || sender() == _miscMountLineEdit) {
2199 enable = !_miscMountLineEdit->text().isEmpty();
2200 enableWidget(enable, _perfIntrComboBox);
2201 enableWidget(enable, _scanRTCMCheckBox);
2202 enableWidget(enable, _miscPortLineEdit);
2203 }
2204
2205 // Enable/disable Broadcast Ephemerides
2206 // ------------------------------------
2207 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2208 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2209 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2210 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2211 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2212 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2213 _uploadEphPortLineEdit->setEnabled(true);
2214 _uploadEphMountpointLineEdit->setEnabled(true);
2215 _uploadEphPasswordLineEdit->setEnabled(true);
2216 _uploadEphSampleSpinBox->setEnabled(true);
2217 }
2218 else {
2219 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2220 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2221 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2222 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2223 _uploadEphPortLineEdit->setEnabled(false);
2224 _uploadEphMountpointLineEdit->setEnabled(false);
2225 _uploadEphPasswordLineEdit->setEnabled(false);
2226 _uploadEphSampleSpinBox->setEnabled(false);
2227 }
2228 }
2229
2230 // Combine Corrections
2231 // -------------------
2232 if (sender() == 0 || sender() == _cmbTable) {
2233 int iRow = _cmbTable->rowCount();
2234 if (iRow > 0) {
2235 enableWidget(true, _cmbMethodComboBox);
2236 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2237 _cmbSamplSpinBox->setStyleSheet("background-color: white");
2238 _cmbMaxresLineEdit->setEnabled(true);
2239 _cmbSamplSpinBox->setEnabled(true);
2240 _cmbUseGlonass->setEnabled(true);
2241 }
2242 else {
2243 enableWidget(false, _cmbMethodComboBox);
2244 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2245 _cmbSamplSpinBox->setStyleSheet("background-color: lightGray");
2246 _cmbMaxresLineEdit->setEnabled(false);
2247 _cmbSamplSpinBox->setEnabled(false);
2248 _cmbUseGlonass->setEnabled(false);
2249 }
2250 }
2251
2252 // Upload(clk)
2253 // -----------
2254 int iRow = _uploadTable->rowCount();
2255 if (iRow > 0) {
2256 enableWidget(true, _uploadIntrComboBox);
2257 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2258 enableWidget(true, _uploadSamplClkRnxSpinBox);
2259 enableWidget(true, _uploadSamplSp3SpinBox);
2260 enableWidget(true, _uploadAntexFile);
2261 }
2262 else {
2263 enableWidget(false, _uploadIntrComboBox);
2264 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2265 enableWidget(false, _uploadSamplClkRnxSpinBox);
2266 enableWidget(false, _uploadSamplSp3SpinBox);
2267 enableWidget(false, _uploadAntexFile);
2268 }
2269
2270 // QC
2271 // --
2272 if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2273 enable = !_reqcActionComboBox->currentText().isEmpty();
2274 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2275 bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2276 enableWidget(enable, _reqcObsFileChooser);
2277 enableWidget(enable, _reqcNavFileChooser);
2278 enableWidget(enable, _reqcOutLogLineEdit);
2279 enableWidget(enable && enable10, _reqcEditOptionButton);
2280 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2281 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2282 enableWidget(enable && !enable10, _reqcLogSummaryOnly);
2283 enableWidget(enable && !enable10, _reqcSkyPlotSignals);
2284 enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2285 }
2286
2287 // SP3 File Comparison
2288 // -------------------
2289 if (sender() == 0 || sender() == _sp3CompFileChooser) {
2290 enable = !_sp3CompFileChooser->fileName().isEmpty();
2291 enableWidget(enable, _sp3CompLogLineEdit);
2292 enableWidget(enable, _sp3CompExclude);
2293 }
2294
2295 enableStartStop();
2296}
2297
2298//
2299////////////////////////////////////////////////////////////////////////////
2300void bncWindow::slotAddCmbRow() {
2301 int iRow = _cmbTable->rowCount();
2302 _cmbTable->insertRow(iRow);
2303 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2304 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2305 }
2306}
2307
2308//
2309////////////////////////////////////////////////////////////////////////////
2310void bncWindow::slotDelCmbRow() {
2311 int nRows = _cmbTable->rowCount();
2312 bool flg[nRows];
2313 for (int iRow = 0; iRow < nRows; iRow++) {
2314 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2315 flg[iRow] = true;
2316 }
2317 else {
2318 flg[iRow] = false;
2319 }
2320 }
2321 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2322 if (flg[iRow]) {
2323 _cmbTable->removeRow(iRow);
2324 }
2325 }
2326 nRows = _cmbTable->rowCount();
2327 if (nRows < 1) {
2328 enableWidget(false, _cmbMethodComboBox);
2329 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2330 _cmbSamplSpinBox->setStyleSheet("background-color: lightGray");
2331 _cmbMaxresLineEdit->setEnabled(false);
2332 _cmbSamplSpinBox->setEnabled(false);
2333 _cmbUseGlonass->setEnabled(false);
2334 }
2335}
2336
2337//
2338////////////////////////////////////////////////////////////////////////////
2339void bncWindow::populateCmbTable() {
2340
2341 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2342 _cmbTable->removeRow(iRow);
2343 }
2344
2345 bncSettings settings;
2346
2347 int iRow = -1;
2348 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2349 while (it.hasNext()) {
2350 QStringList hlp = it.next().split(" ");
2351 if (hlp.size() > 2) {
2352 ++iRow;
2353 _cmbTable->insertRow(iRow);
2354 }
2355 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2356 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2357 }
2358 }
2359}
2360
2361//
2362////////////////////////////////////////////////////////////////////////////
2363void bncWindow::slotAddUploadRow() {
2364 int iRow = _uploadTable->rowCount();
2365 _uploadTable->insertRow(iRow);
2366 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2367 if (iCol == 3) {
2368 QLineEdit* passwd = new QLineEdit();
2369 passwd->setFrame(false);
2370 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2371 _uploadTable->setCellWidget(iRow, iCol, passwd);
2372 }
2373 else if (iCol == 4) {
2374 QComboBox* system = new QComboBox();
2375 system->setEditable(false);
2376 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2377 system->setFrame(false);
2378 _uploadTable->setCellWidget(iRow, iCol, system);
2379 }
2380 else if (iCol == 5) {
2381 QCheckBox* com = new QCheckBox();
2382 _uploadTable->setCellWidget(iRow, iCol, com);
2383 }
2384 else if (iCol == 11) {
2385 bncTableItem* bncIt = new bncTableItem();
2386 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2387 _uploadTable->setItem(iRow, iCol, bncIt);
2388 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2389 }
2390 else {
2391 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2392 }
2393 }
2394}
2395
2396//
2397////////////////////////////////////////////////////////////////////////////
2398void bncWindow::slotDelUploadRow() {
2399 BNC_CORE->_uploadTableItems.clear();
2400 int nRows = _uploadTable->rowCount();
2401 bool flg[nRows];
2402 for (int iRow = 0; iRow < nRows; iRow++) {
2403 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2404 flg[iRow] = true;
2405 }
2406 else {
2407 flg[iRow] = false;
2408 }
2409 }
2410 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2411 if (flg[iRow]) {
2412 _uploadTable->removeRow(iRow);
2413 }
2414 }
2415 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2416 BNC_CORE->_uploadTableItems[iRow] =
2417 (bncTableItem*) _uploadTable->item(iRow, 11);
2418 }
2419 nRows = _uploadTable->rowCount();
2420 if (nRows < 1) {
2421 enableWidget(false, _uploadIntrComboBox);
2422 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2423 enableWidget(false, _uploadSamplSp3SpinBox);
2424 enableWidget(false, _uploadSamplClkRnxSpinBox);
2425 enableWidget(false, _uploadAntexFile);
2426 }
2427}
2428
2429//
2430////////////////////////////////////////////////////////////////////////////
2431void bncWindow::populateUploadTable() {
2432 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2433 _uploadTable->removeRow(iRow);
2434 }
2435
2436 bncSettings settings;
2437
2438 int iRow = -1;
2439 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2440 while (it.hasNext()) {
2441 QStringList hlp = it.next().split(",");
2442 if (hlp.size() > 6) {
2443 ++iRow;
2444 _uploadTable->insertRow(iRow);
2445 }
2446 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2447 if (iCol == 3) {
2448 QLineEdit* passwd = new QLineEdit();
2449 passwd->setFrame(false);
2450 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2451 passwd->setText(hlp[iCol]);
2452 _uploadTable->setCellWidget(iRow, iCol, passwd);
2453 }
2454 else if (iCol == 4) {
2455 QComboBox* system = new QComboBox();
2456 system->setEditable(false);
2457 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2458 system->setFrame(false);
2459 system->setCurrentIndex(system->findText(hlp[iCol]));
2460 _uploadTable->setCellWidget(iRow, iCol, system);
2461 }
2462 else if (iCol == 5) {
2463 QCheckBox* com = new QCheckBox();
2464 if (hlp[iCol].toInt() == Qt::Checked) {
2465 com->setCheckState(Qt::Checked);
2466 }
2467 _uploadTable->setCellWidget(iRow, iCol, com);
2468 }
2469 else if (iCol == 11) {
2470 bncTableItem* bncIt = new bncTableItem();
2471 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2472 _uploadTable->setItem(iRow, iCol, bncIt);
2473 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2474 }
2475 else {
2476 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2477 }
2478 }
2479 }
2480}
2481
2482//
2483////////////////////////////////////////////////////////////////////////////
2484void bncWindow::slotSetUploadTrafo() {
2485 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2486 dlg->exec();
2487 delete dlg;
2488}
2489
2490// Progress Bar Change
2491////////////////////////////////////////////////////////////////////////////
2492void bncWindow::slotPostProcessingProgress(int nEpo) {
2493 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2494}
2495
2496// Post-Processing Reqc Finished
2497////////////////////////////////////////////////////////////////////////////
2498void bncWindow::slotPostProcessingFinished() {
2499 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2500 _runningPPP = false;
2501 _runningEdit = false;
2502 _runningQC = false;
2503 _runningSp3Comp = false;
2504 _actStart->setText(tr("Sta&rt"));
2505 enableStartStop();
2506}
2507
2508// Edit teqc-like editing options
2509////////////////////////////////////////////////////////////////////////////
2510void bncWindow::slotReqcEditOption() {
2511 saveOptions();
2512 reqcDlg* dlg = new reqcDlg(this);
2513 dlg->move(this->pos().x()+50, this->pos().y()+50);
2514 dlg->exec();
2515 delete dlg;
2516}
2517
2518// Enable/Disable Start and Stop Buttons
2519////////////////////////////////////////////////////////////////////////////
2520void bncWindow::enableStartStop() {
2521 if ( running() ) {
2522 _actStart->setEnabled(false);
2523 if (_runningRealTime || _runningPPP) {
2524 _actStop->setEnabled(true);
2525 }
2526 }
2527 else {
2528 _actStart->setEnabled(true);
2529 _actStop->setEnabled(false);
2530 }
2531}
2532
2533// Show Map
2534////////////////////////////////////////////////////////////////////////////
2535void bncWindow::slotMapMountPoints() {
2536 saveOptions();
2537 t_bncMap* bncMap = new t_bncMap(this);
2538 bncMap->setMinimumSize(800, 600);
2539 bncMap->setWindowTitle("Selected Mountpoints");
2540
2541 bncSettings settings;
2542 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2543 while (it.hasNext()) {
2544 QStringList hlp = it.next().split(" ");
2545 if (hlp.size() < 5) continue;
2546 QUrl url(hlp[0]);
2547 double latDeg = hlp[2].toDouble();
2548 double lonDeg = hlp[3].toDouble();
2549 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2550 }
2551
2552 bncMap->show();
2553}
2554
2555// Show Map
2556////////////////////////////////////////////////////////////////////////////
2557void bncWindow::slotMapPPP() {
2558#ifdef QT_WEBKIT
2559 saveOptions();
2560 enableWidget(false, _pppWidgets._mapWinButton);
2561 enableWidget(false, _pppWidgets._useGoogleMap);
2562 enableWidget(false, _pppWidgets._useOpenStreetMap);
2563 enableWidget(false, _pppWidgets._mapWinDotSize);
2564 enableWidget(false, _pppWidgets._mapWinDotColor);
2565
2566 if (!_mapWin) {
2567 _mapWin = new bncMapWin(this);
2568 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2569 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2570 _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2571 }
2572 _mapWin->show();
2573#else
2574 QMessageBox::information(this, "Information",
2575 "Qt Library compiled without QtWebKit");
2576#endif
2577}
2578
2579// Show Map
2580////////////////////////////////////////////////////////////////////////////
2581void bncWindow::slotMapPPPClosed() {
2582#ifdef QT_WEBKIT
2583 enableWidget(true, _pppWidgets._mapWinButton);
2584 enableWidget(true, _pppWidgets._useGoogleMap);
2585 enableWidget(true, _pppWidgets._useOpenStreetMap);
2586 enableWidget(true, _pppWidgets._mapWinDotSize);
2587 enableWidget(true, _pppWidgets._mapWinDotColor);
2588 if (_mapWin) {
2589 QListIterator<bncGetThread*> it(_threads);
2590 while (it.hasNext()) {
2591 bncGetThread* thread = it.next();
2592 thread->disconnect(_mapWin);
2593 }
2594 _mapWin->deleteLater();
2595 _mapWin = 0;
2596 }
2597#endif
2598}
Note: See TracBrowser for help on using the repository browser.