source: ntrip/trunk/BNC/src/bncwindow.cpp@ 5690

Last change on this file since 5690 was 5690, checked in by mervart, 10 years ago
File size: 152.8 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#ifdef QT_WEBKIT
67# include "map/bncmapwin.h"
68#endif
69#ifdef USE_POSTPROCESSING
70# include "rinex/bncpostprocess.h"
71# include "rinex/reqcedit.h"
72# include "rinex/reqcanalyze.h"
73#endif
74
75using namespace std;
76
77#ifdef GNSSCENTER_PLUGIN
78Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
79#endif
80
81// Constructor
82////////////////////////////////////////////////////////////////////////////
83t_pppWidgets::t_pppWidgets() {
84 _dataSource = new QComboBox();
85 _rinexObs = new qtFileChooser();
86 _rinexNav = new qtFileChooser();
87 _corrHostPort = new QLineEdit();
88 _corrFile = new qtFileChooser();
89 _crdFile = new qtFileChooser();
90 _antexFile = new qtFileChooser();
91 _logFile = new QLineEdit();
92 _nmeaFile = new QLineEdit();
93 _nmeaPort = new QLineEdit();
94 _staTable = new QTableWidget();
95 _lcGPS = new QComboBox();
96 _lcGLONASS = new QComboBox();
97 _lcGalileo = new QComboBox();
98 _sigmaC1 = new QLineEdit();
99 _sigmaL1 = new QLineEdit();
100 _corrWaitTime = new QSpinBox();
101}
102
103// Constructor
104////////////////////////////////////////////////////////////////////////////
105bncWindow::bncWindow() {
106
107#ifdef GNSSCENTER_PLUGIN
108 BNC_CORE->setConfFileName("");
109#endif
110
111 _caster = 0;
112 _casterEph = 0;
113
114 _bncFigure = new bncFigure(this);
115 _bncFigureLate = new bncFigureLate(this);
116 _bncFigurePPP = new bncFigurePPP(this);
117 _runningRealTime = false;
118 _runningPostProcessingPPP = false;
119 _runningPostProcessingReqc = false;
120 _postProcessing = 0;
121
122 _pppSPPComboBox = 0; // necessary for enableStartStop()
123 _reqcActionComboBox = 0; // necessary for enableStartStop()
124
125 _mapWin = 0;
126
127 int ww = QFontMetrics(this->font()).width('w');
128
129 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
130
131 setMinimumSize(85*ww, 65*ww);
132
133 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
134
135 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
136 this, SLOT(slotWindowMessage(QByteArray,bool)));
137
138 // Create Actions
139 // --------------
140 _actHelp = new QAction(tr("&Help Contents"),this);
141 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
142
143 _actAbout = new QAction(tr("&About BNC"),this);
144 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
145
146 _actFlowchart = new QAction(tr("&Flow Chart"),this);
147 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
148
149 _actFontSel = new QAction(tr("Select &Font"),this);
150 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
151
152 _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
153 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
154
155 _actQuit = new QAction(tr("&Quit"),this);
156 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
157
158 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
159 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
160
161 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
162 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
163 _actDeleteMountPoints->setEnabled(false);
164
165 _actMapMountPoints = new QAction(tr("&Map"),this);
166 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
167
168 _actStart = new QAction(tr("Sta&rt"),this);
169 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
170
171 _actStop = new QAction(tr("Sto&p"),this);
172 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
173
174 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
175 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
176
177 CreateMenu();
178 AddToolbar();
179
180 bncSettings settings;
181
182 // Network Options
183 // ---------------
184 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
185 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
186
187 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
188 this, SLOT(slotBncTextChanged()));
189
190 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
191 _ignoreSslErrorsCheckBox = new QCheckBox();
192 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
193 settings.value("ignoreSslErrors").toInt()));
194
195 // General Options
196 // ---------------
197 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
198 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
199 _rnxAppendCheckBox = new QCheckBox();
200 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
201 settings.value("rnxAppend").toInt()));
202 _onTheFlyComboBox = new QComboBox();
203 _onTheFlyComboBox->setEditable(false);
204 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
205 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
206 if (ii != -1) {
207 _onTheFlyComboBox->setCurrentIndex(ii);
208 }
209 _autoStartCheckBox = new QCheckBox();
210 _autoStartCheckBox->setCheckState(Qt::CheckState(
211 settings.value("autoStart").toInt()));
212
213 // RINEX Observations Options
214 // --------------------------
215 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
216 _rnxIntrComboBox = new QComboBox();
217 _rnxIntrComboBox->setEditable(false);
218 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
219 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
220 if (ii != -1) {
221 _rnxIntrComboBox->setCurrentIndex(ii);
222 }
223 _rnxSamplSpinBox = new QSpinBox();
224 _rnxSamplSpinBox->setMinimum(0);
225 _rnxSamplSpinBox->setMaximum(60);
226 _rnxSamplSpinBox->setSingleStep(5);
227 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
228 _rnxSamplSpinBox->setSuffix(" sec");
229 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
230 _rnxSkelLineEdit->setMaximumWidth(5*ww);
231 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
232 _rnxV3CheckBox = new QCheckBox();
233 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
234
235 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
236 this, SLOT(slotBncTextChanged()));
237
238 // RINEX Ephemeris Options
239 // -----------------------
240 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
241 _ephIntrComboBox = new QComboBox();
242 _ephIntrComboBox->setEditable(false);
243 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
244 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
245 if (jj != -1) {
246 _ephIntrComboBox->setCurrentIndex(jj);
247 }
248 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
249 _ephV3CheckBox = new QCheckBox();
250 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
251
252 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
253 this, SLOT(slotBncTextChanged()));
254
255 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
256 this, SLOT(slotBncTextChanged()));
257
258 // Broadcast Corrections Options
259 // -----------------------------
260 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
261 _corrIntrComboBox = new QComboBox();
262 _corrIntrComboBox->setEditable(false);
263 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
264 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
265 if (mm != -1) {
266 _corrIntrComboBox->setCurrentIndex(mm);
267 }
268 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
269 _corrTimeSpinBox = new QSpinBox();
270 _corrTimeSpinBox->setMinimum(0);
271 _corrTimeSpinBox->setMaximum(60);
272 _corrTimeSpinBox->setSingleStep(1);
273 _corrTimeSpinBox->setSuffix(" sec");
274 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
275
276 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
277 this, SLOT(slotBncTextChanged()));
278
279 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
280 this, SLOT(slotBncTextChanged()));
281
282 // Feed Engine Options
283 // -------------------
284 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
285 _waitTimeSpinBox = new QSpinBox();
286 _waitTimeSpinBox->setMinimum(1);
287 _waitTimeSpinBox->setMaximum(30);
288 _waitTimeSpinBox->setSingleStep(1);
289 _waitTimeSpinBox->setSuffix(" sec");
290 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
291 _binSamplSpinBox = new QSpinBox();
292 _binSamplSpinBox->setMinimum(0);
293 _binSamplSpinBox->setMaximum(60);
294 _binSamplSpinBox->setSingleStep(5);
295 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
296 _binSamplSpinBox->setSuffix(" sec");
297 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
298 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
299
300 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
301 this, SLOT(slotBncTextChanged()));
302
303 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
304 this, SLOT(slotBncTextChanged()));
305
306 // Serial Output Options
307 // ---------------------
308 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
309 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
310 _serialBaudRateComboBox = new QComboBox();
311 _serialBaudRateComboBox->addItems(QString("110,300,600,"
312 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
313 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
314 if (kk != -1) {
315 _serialBaudRateComboBox->setCurrentIndex(kk);
316 }
317 _serialFlowControlComboBox = new QComboBox();
318 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
319 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
320 if (kk != -1) {
321 _serialFlowControlComboBox->setCurrentIndex(kk);
322 }
323 _serialDataBitsComboBox = new QComboBox();
324 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
325 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
326 if (kk != -1) {
327 _serialDataBitsComboBox->setCurrentIndex(kk);
328 }
329 _serialParityComboBox = new QComboBox();
330 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
331 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
332 if (kk != -1) {
333 _serialParityComboBox->setCurrentIndex(kk);
334 }
335 _serialStopBitsComboBox = new QComboBox();
336 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
337 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
338 if (kk != -1) {
339 _serialStopBitsComboBox->setCurrentIndex(kk);
340 }
341 _serialAutoNMEAComboBox = new QComboBox();
342 _serialAutoNMEAComboBox->addItems(QString("Auto,Manual").split(","));
343 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
344 if (kk != -1) {
345 _serialAutoNMEAComboBox->setCurrentIndex(kk);
346 }
347 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
348 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
349
350 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
351 this, SLOT(slotBncTextChanged()));
352
353 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
354 this, SLOT(slotBncTextChanged()));
355
356 // Outages Options
357 // ---------------
358 _obsRateComboBox = new QComboBox();
359 _obsRateComboBox->setEditable(false);
360 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
361 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
362 if (kk != -1) {
363 _obsRateComboBox->setCurrentIndex(kk);
364 }
365 _adviseFailSpinBox = new QSpinBox();
366 _adviseFailSpinBox->setMinimum(0);
367 _adviseFailSpinBox->setMaximum(60);
368 _adviseFailSpinBox->setSingleStep(1);
369 _adviseFailSpinBox->setSuffix(" min");
370 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
371 _adviseRecoSpinBox = new QSpinBox();
372 _adviseRecoSpinBox->setMinimum(0);
373 _adviseRecoSpinBox->setMaximum(60);
374 _adviseRecoSpinBox->setSingleStep(1);
375 _adviseRecoSpinBox->setSuffix(" min");
376 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
377 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
378
379 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
380 this, SLOT(slotBncTextChanged()));
381
382 // Miscellaneous Options
383 // ---------------------
384 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
385 _miscPortLineEdit = new QLineEdit(settings.value("miscPort").toString());
386 _perfIntrComboBox = new QComboBox();
387 _perfIntrComboBox->setEditable(false);
388 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
389 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
390 if (ll != -1) {
391 _perfIntrComboBox->setCurrentIndex(ll);
392 }
393 _scanRTCMCheckBox = new QCheckBox();
394 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
395 settings.value("scanRTCM").toInt()));
396
397 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
398 this, SLOT(slotBncTextChanged()));
399
400 // PPP Options
401 // -----------
402 _pppMountLineEdit = new QLineEdit(settings.value("pppMount").toString());
403 _pppMountLineEdit->setMaximumWidth(8*ww);
404 _pppCorrMountLineEdit = new QLineEdit(settings.value("pppCorrMount").toString());
405 _pppMountLineEdit->setMinimumWidth(8*ww);
406 _pppCorrMountLineEdit->setMinimumWidth(8*ww);
407 _pppCorrMountLineEdit->setMaximumWidth(8*ww);
408 _pppNMEALineEdit = new QLineEdit(settings.value("nmeaFile").toString());
409 _pppNMEALineEdit->setMinimumWidth(15*ww);
410 _pppNMEAPortLineEdit = new QLineEdit(settings.value("nmeaPort").toString());
411 _pppNMEAPortLineEdit->setMaximumWidth(8*ww);
412 _pppNMEAPortLineEdit->setMinimumWidth(8*ww);
413 _pppSigCLineEdit = new QLineEdit(settings.value("pppSigmaCode").toString());
414 _pppSigPLineEdit = new QLineEdit(settings.value("pppSigmaPhase").toString());
415 _pppSigCrd0 = new QLineEdit(settings.value("pppSigCrd0").toString());
416 _pppSigCrdP = new QLineEdit(settings.value("pppSigCrdP").toString());
417 _pppSigTrp0 = new QLineEdit(settings.value("pppSigTrp0").toString());
418 _pppSigTrpP = new QLineEdit(settings.value("pppSigTrpP").toString());
419 _pppAverageLineEdit = new QLineEdit(settings.value("pppAverage").toString());
420 _pppQuickStartLineEdit = new QLineEdit(settings.value("pppQuickStart").toString());
421 _pppMaxSolGapLineEdit = new QLineEdit(settings.value("pppMaxSolGap").toString());
422 _pppAudioResponseLineEdit = new QLineEdit(settings.value("pppAudioResponse").toString());
423 _pppRefCrdXLineEdit = new QLineEdit(settings.value("pppRefCrdX").toString());
424 _pppRefCrdYLineEdit = new QLineEdit(settings.value("pppRefCrdY").toString());
425 _pppRefCrdZLineEdit = new QLineEdit(settings.value("pppRefCrdZ").toString());
426 _pppRefdNLineEdit = new QLineEdit(settings.value("pppRefdN").toString());
427 _pppRefdELineEdit = new QLineEdit(settings.value("pppRefdE").toString());
428 _pppRefdULineEdit = new QLineEdit(settings.value("pppRefdU").toString());
429 _pppSync = new QLineEdit(settings.value("pppSync").toString());
430 _pppAntexFileChooser = new qtFileChooser;
431 _pppAntexFileChooser->setMinimumWidth(12*ww);
432 _pppAntennaLineEdit = new QLineEdit(settings.value("pppAntenna").toString());
433 _pppAntexFileChooser->setFileName(settings.value("pppAntex").toString());
434
435 _pppSPPComboBox = new QComboBox();
436 _pppSPPComboBox->setEditable(false);
437 _pppSPPComboBox->addItems(QString(",Realtime-PPP,Realtime-SPP,Post-Processing").split(","));
438 int ik = _pppSPPComboBox->findText(settings.value("pppSPP").toString());
439 if (ik != -1) {
440 _pppSPPComboBox->setCurrentIndex(ik);
441 }
442 _pppUsePhaseCheckBox = new QCheckBox();
443 _pppUsePhaseCheckBox->setCheckState(Qt::CheckState(
444 settings.value("pppUsePhase").toInt()));
445 _pppEstTropoCheckBox = new QCheckBox();
446 _pppEstTropoCheckBox->setCheckState(Qt::CheckState(
447 settings.value("pppEstTropo").toInt()));
448 _pppGLONASSCheckBox = new QCheckBox();
449 _pppGLONASSCheckBox->setCheckState(Qt::CheckState(
450 settings.value("pppGLONASS").toInt()));
451 _pppGalileoCheckBox = new QCheckBox();
452 _pppGalileoCheckBox->setCheckState(Qt::CheckState(
453 settings.value("pppGalileo").toInt()));
454
455 connect(_pppMountLineEdit, SIGNAL(textChanged(const QString &)),
456 this, SLOT(slotBncTextChanged()));
457
458 connect(_pppCorrMountLineEdit, SIGNAL(textChanged(const QString &)),
459 this, SLOT(slotBncTextChanged()));
460
461 connect(_pppUsePhaseCheckBox, SIGNAL(stateChanged(int)),
462 this, SLOT(slotBncTextChanged()));
463
464 connect(_pppRefCrdXLineEdit, SIGNAL(textChanged(const QString &)),
465 this, SLOT(slotBncTextChanged()));
466 connect(_pppRefCrdYLineEdit, SIGNAL(textChanged(const QString &)),
467 this, SLOT(slotBncTextChanged()));
468 connect(_pppRefCrdZLineEdit, SIGNAL(textChanged(const QString &)),
469 this, SLOT(slotBncTextChanged()));
470 connect(_pppRefdNLineEdit, SIGNAL(textChanged(const QString &)),
471 this, SLOT(slotBncTextChanged()));
472 connect(_pppRefdELineEdit, SIGNAL(textChanged(const QString &)),
473 this, SLOT(slotBncTextChanged()));
474 connect(_pppRefdULineEdit, SIGNAL(textChanged(const QString &)),
475 this, SLOT(slotBncTextChanged()));
476
477 connect(_pppEstTropoCheckBox, SIGNAL(stateChanged(int)),
478 this, SLOT(slotBncTextChanged()));
479
480 connect(_pppSync, SIGNAL(textChanged(const QString &)),
481 this, SLOT(slotBncTextChanged()));
482
483 connect(_pppSPPComboBox, SIGNAL(currentIndexChanged(const QString &)),
484 this, SLOT(slotBncTextChanged()));
485
486 connect(_pppAntexFileChooser, SIGNAL(fileNameChanged(const QString &)),
487 this, SLOT(slotBncTextChanged()));
488
489 connect(_pppQuickStartLineEdit, SIGNAL(textChanged(const QString &)),
490 this, SLOT(slotBncTextChanged()));
491
492 // Streams
493 // -------
494 _mountPointsTable = new QTableWidget(0,8);
495
496 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
497 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
498 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
499 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
500 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
501 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
502 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
503 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
504 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
505_mountPointsTable->setHorizontalHeaderLabels(labels);
506 _mountPointsTable->setGridStyle(Qt::NoPen);
507 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
508 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
509 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
510 _mountPointsTable->hideColumn(0);
511 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
512 SLOT(slotSelectionChanged()));
513 populateMountPointsTable();
514
515 _log = new QTextBrowser();
516 _log->setReadOnly(true);
517
518 // Combine Corrections
519 // -------------------
520 _cmbTable = new QTableWidget(0,3);
521 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
522 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
523 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
524 _cmbTable->setMaximumWidth(30*ww);
525 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
526 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
527 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
528 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
529 _cmbTable->horizontalHeader()->setStretchLastSection(true);
530 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
531
532 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
533
534 _cmbSamplSpinBox = new QSpinBox;
535 _cmbSamplSpinBox->setMinimum(10);
536 _cmbSamplSpinBox->setMaximum(60);
537 _cmbSamplSpinBox->setSingleStep(10);
538 _cmbSamplSpinBox->setMaximumWidth(9*ww);
539 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
540 _cmbSamplSpinBox->setSuffix(" sec");
541
542 QPushButton* addCmbRowButton = new QPushButton("Add Row");
543 QPushButton* delCmbRowButton = new QPushButton("Delete");
544
545 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
546 SLOT(slotBncTextChanged()));
547
548 _cmbMethodComboBox = new QComboBox();
549 _cmbMethodComboBox->setEditable(false);
550 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
551 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
552 if (im != -1) {
553 _cmbMethodComboBox->setCurrentIndex(im);
554 }
555
556 int iRow = _cmbTable->rowCount();
557 if (iRow > 0) {
558 enableWidget(true, _cmbMethodComboBox);
559 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
560 _cmbMaxresLineEdit->setEnabled(true);
561 _cmbSamplSpinBox->setEnabled(true);
562 }
563 else {
564 enableWidget(false, _cmbMethodComboBox);
565 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
566 _cmbMaxresLineEdit->setEnabled(false);
567 _cmbSamplSpinBox->setEnabled(false);
568 }
569
570 // Upload Results
571 // -------------
572 _uploadTable = new QTableWidget(0,12);
573 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
574 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
575 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
576 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
577 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
578 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
579 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
580 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
581 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
582 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
583 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
584 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
585 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
586 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
587 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
588 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
589 _uploadTable->horizontalHeader()->setStretchLastSection(true);
590 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
591
592 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
593 SLOT(slotBncTextChanged()));
594
595 QPushButton* addUploadRowButton = new QPushButton("Add Row");
596 QPushButton* delUploadRowButton = new QPushButton("Del Row");
597 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
598 _uploadIntrComboBox = new QComboBox;
599 _uploadIntrComboBox->setEditable(false);
600 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
601 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
602 if (ii != -1) {
603 _uploadIntrComboBox->setCurrentIndex(ii);
604 }
605
606 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
607 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
608 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
609 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
610 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
611 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
612 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
613
614 _uploadSamplSp3SpinBox = new QSpinBox;
615 _uploadSamplSp3SpinBox->setMinimum(0);
616 _uploadSamplSp3SpinBox->setMaximum(15);
617 _uploadSamplSp3SpinBox->setSingleStep(1);
618 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
619 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
620 _uploadSamplSp3SpinBox->setSuffix(" min");
621
622 _uploadSamplClkRnxSpinBox = new QSpinBox;
623 _uploadSamplClkRnxSpinBox->setMinimum(0);
624 _uploadSamplClkRnxSpinBox->setMaximum(60);
625 _uploadSamplClkRnxSpinBox->setSingleStep(5);
626 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
627 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
628 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
629
630 int iRowT = _uploadTable->rowCount();
631 if (iRowT > 0) {
632 enableWidget(true, _uploadIntrComboBox);
633 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
634 enableWidget(true, _uploadSamplSp3SpinBox);
635 enableWidget(true, _uploadSamplClkRnxSpinBox);
636 }
637 else {
638 enableWidget(false, _uploadIntrComboBox);
639 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
640 enableWidget(false, _uploadSamplSp3SpinBox);
641 enableWidget(false, _uploadSamplClkRnxSpinBox);
642 }
643
644 // Upload RTCM3 Ephemeris
645 // ----------------------
646 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
647 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
648 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
649 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
650 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
651 _uploadEphSampleSpinBox = new QSpinBox;
652 _uploadEphSampleSpinBox->setMinimum(5);
653 _uploadEphSampleSpinBox->setMaximum(60);
654 _uploadEphSampleSpinBox->setSingleStep(5);
655 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
656 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
657 _uploadEphSampleSpinBox->setSuffix(" sec");
658 _uploadEphBytesCounter = new bncBytesCounter;
659
660 // Canvas with Editable Fields
661 // ---------------------------
662 _canvas = new QWidget;
663 setCentralWidget(_canvas);
664
665 _aogroup = new QTabWidget();
666 QWidget* pgroup = new QWidget();
667 QWidget* ggroup = new QWidget();
668 QWidget* sgroup = new QWidget();
669 QWidget* egroup = new QWidget();
670 QWidget* agroup = new QWidget();
671 QWidget* cgroup = new QWidget();
672 QWidget* ogroup = new QWidget();
673 QWidget* rgroup = new QWidget();
674 QWidget* sergroup = new QWidget();
675 QWidget* pppgroup = new QWidget();
676 QWidget* ppp2group = new QWidget();
677 QWidget* ppp3group = new QWidget();
678 QWidget* pppGroup1 = new QWidget();
679 QWidget* pppGroup2 = new QWidget();
680 QWidget* pppGroup3 = new QWidget();
681 QWidget* reqcgroup = new QWidget();
682 QWidget* cmbgroup = new QWidget();
683 QWidget* uploadgroup = new QWidget();
684 QWidget* uploadEphgroup = new QWidget();
685 _aogroup->addTab(pgroup,tr("Network"));
686 _aogroup->addTab(ggroup,tr("General"));
687 _aogroup->addTab(ogroup,tr("RINEX Observations"));
688 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
689 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
690 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
691 _aogroup->addTab(sgroup,tr("Feed Engine"));
692 _aogroup->addTab(sergroup,tr("Serial Output"));
693 _aogroup->addTab(agroup,tr("Outages"));
694 _aogroup->addTab(rgroup,tr("Miscellaneous"));
695 _aogroup->addTab(pppgroup,tr("PPP (1)"));
696 _aogroup->addTab(ppp2group,tr("PPP (2)"));
697 _aogroup->addTab(ppp3group,tr("PPP (3)"));
698
699 _aogroup->addTab(pppGroup1,tr("PPP NEW (1)"));
700 _aogroup->addTab(pppGroup2,tr("PPP NEW (2)"));
701 _aogroup->addTab(pppGroup3,tr("PPP NEW (3)"));
702
703#ifdef USE_COMBINATION
704 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
705#endif
706 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
707 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
708
709 // Log Tab
710 // -------
711 _loggroup = new QTabWidget();
712 _loggroup->addTab(_log,tr("Log"));
713 _loggroup->addTab(_bncFigure,tr("Throughput"));
714 _loggroup->addTab(_bncFigureLate,tr("Latency"));
715 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
716
717 // Netowork (Proxy and SSL) Tab
718 // ----------------------------
719 QGridLayout* pLayout = new QGridLayout;
720 pLayout->setColumnMinimumWidth(0,13*ww);
721 _proxyPortLineEdit->setMaximumWidth(9*ww);
722
723 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none."),0, 0, 1, 50);
724 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
725 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
726 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
727 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
728 pLayout->addWidget(new QLabel("Path to SSL Certificates"), 3, 0);
729 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
730 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
731 pLayout->addWidget(new QLabel("Ignore SSL Authorization Errors"), 4, 0);
732 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
733 pLayout->addWidget(new QLabel(" "), 4, 0);
734 pLayout->addWidget(new QLabel(" "), 5, 0);
735 pLayout->addWidget(new QLabel(" "), 6, 0);
736 pgroup->setLayout(pLayout);
737
738 // General Tab
739 // -----------
740 QGridLayout* gLayout = new QGridLayout;
741 gLayout->setColumnMinimumWidth(0,14*ww);
742 _onTheFlyComboBox->setMaximumWidth(9*ww);
743
744 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),0, 0, 1, 50);
745 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
746 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,30);
747 gLayout->addWidget(new QLabel("Append files"), 2, 0);
748 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
749 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
750 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
751 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
752 gLayout->addWidget(_autoStartCheckBox, 4, 1);
753 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
754 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,30);
755 gLayout->addWidget(new QLabel(" "), 6, 0);
756 ggroup->setLayout(gLayout);
757
758 // RINEX Observations
759 // ------------------
760 QGridLayout* oLayout = new QGridLayout;
761 oLayout->setColumnMinimumWidth(0,14*ww);
762 _rnxIntrComboBox->setMaximumWidth(9*ww);
763 _rnxSamplSpinBox->setMaximumWidth(9*ww);
764
765 oLayout->addWidget(new QLabel("Saving RINEX observation files."),0, 0, 1,50);
766 oLayout->addWidget(new QLabel("Directory"), 1, 0);
767 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1,24);
768 oLayout->addWidget(new QLabel("Interval"), 2, 0);
769 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
770 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
771 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
772 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
773 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, 1, 1, Qt::AlignLeft);
774 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
775 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1,24);
776 oLayout->addWidget(new QLabel("Version 3"), 5, 0);
777 oLayout->addWidget(_rnxV3CheckBox, 5, 1);
778 oLayout->addWidget(new QLabel(" "), 6, 0);
779 ogroup->setLayout(oLayout);
780
781 // RINEX Ephemeris
782 // ---------------
783 QGridLayout* eLayout = new QGridLayout;
784 eLayout->setColumnMinimumWidth(0,14*ww);
785 _ephIntrComboBox->setMaximumWidth(9*ww);
786 _outEphPortLineEdit->setMaximumWidth(9*ww);
787
788 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),0,0,1,50);
789 eLayout->addWidget(new QLabel("Directory"), 1, 0);
790 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
791 eLayout->addWidget(new QLabel("Interval"), 2, 0);
792 eLayout->addWidget(_ephIntrComboBox, 2, 1);
793 eLayout->addWidget(new QLabel("Port"), 3, 0);
794 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
795 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
796 eLayout->addWidget(_ephV3CheckBox, 4, 1);
797 eLayout->addWidget(new QLabel(" "), 5, 0);
798 eLayout->addWidget(new QLabel(" "), 6, 0);
799 egroup->setLayout(eLayout);
800
801
802 // Broadcast Corrections
803 // ---------------------
804 QGridLayout* cLayout = new QGridLayout;
805 cLayout->setColumnMinimumWidth(0,14*ww);
806 _corrIntrComboBox->setMaximumWidth(9*ww);
807 _corrPortLineEdit->setMaximumWidth(9*ww);
808 _corrTimeSpinBox->setMaximumWidth(9*ww);
809
810 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),0,0,1,50);
811 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
812 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,20);
813 cLayout->addWidget(new QLabel("Interval"), 2, 0);
814 cLayout->addWidget(_corrIntrComboBox, 2, 1);
815 cLayout->addWidget(new QLabel("Port"), 3, 0);
816 cLayout->addWidget(_corrPortLineEdit, 3, 1);
817 cLayout->addWidget(new QLabel(" Wait for full corr epoch"), 3, 2, Qt::AlignRight);
818 cLayout->addWidget(_corrTimeSpinBox, 3, 3, Qt::AlignLeft);
819 cLayout->addWidget(new QLabel(" "), 4, 0);
820 cLayout->addWidget(new QLabel(" "), 5, 0);
821 cLayout->addWidget(new QLabel(" "), 6, 0);
822 cgroup->setLayout(cLayout);
823
824 // Feed Engine
825 // -----------
826 QGridLayout* sLayout = new QGridLayout;
827 sLayout->setColumnMinimumWidth(0,14*ww);
828 _outPortLineEdit->setMaximumWidth(9*ww);
829 _waitTimeSpinBox->setMaximumWidth(9*ww);
830 _binSamplSpinBox->setMaximumWidth(9*ww);
831 _outUPortLineEdit->setMaximumWidth(9*ww);
832
833 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine."),0,0,1,50);
834 sLayout->addWidget(new QLabel("Port"), 1, 0);
835 sLayout->addWidget(_outPortLineEdit, 1, 1);
836 sLayout->addWidget(new QLabel("Wait for full obs epoch"), 1, 2, Qt::AlignRight);
837 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
838 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
839 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
840 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
841 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 20);
842 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
843 sLayout->addWidget(_outUPortLineEdit, 4, 1);
844 sLayout->addWidget(new QLabel(" "), 5, 0);
845 sLayout->addWidget(new QLabel(" "), 6, 0);
846 sgroup->setLayout(sLayout);
847
848 // Serial Output
849 // -------------
850 QGridLayout* serLayout = new QGridLayout;
851 serLayout->setColumnMinimumWidth(0,14*ww);
852 _serialBaudRateComboBox->setMaximumWidth(9*ww);
853 _serialFlowControlComboBox->setMaximumWidth(11*ww);
854 _serialDataBitsComboBox->setMaximumWidth(5*ww);
855 _serialParityComboBox->setMaximumWidth(9*ww);
856 _serialStopBitsComboBox->setMaximumWidth(5*ww);
857 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
858 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
859
860 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver."),0,0,1,30);
861 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
862 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
863 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
864 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
865 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
866 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
867 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
868 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
869 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
870 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
871 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
872 serLayout->addWidget(_serialParityComboBox, 4, 3);
873 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
874 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
875 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
876 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
877 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
878 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,15);
879 serLayout->addWidget(new QLabel("Height"), 5,20, Qt::AlignRight);
880 serLayout->addWidget(_serialHeightNMEALineEdit, 5,21, 1,11);
881 serLayout->addWidget(new QLabel(" "), 6, 0);
882
883 sergroup->setLayout(serLayout);
884
885 // Outages
886 // -------
887 QGridLayout* aLayout = new QGridLayout;
888 aLayout->setColumnMinimumWidth(0,14*ww);
889 _obsRateComboBox->setMaximumWidth(9*ww);
890 _adviseFailSpinBox->setMaximumWidth(9*ww);
891 _adviseRecoSpinBox->setMaximumWidth(9*ww);
892
893 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes."),0,0,1,50,Qt::AlignLeft);
894 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
895 aLayout->addWidget(_obsRateComboBox, 1, 1);
896 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
897 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
898 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
899 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
900 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
901 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,30);
902 aLayout->addWidget(new QLabel(" "), 5, 0);
903 aLayout->addWidget(new QLabel(" "), 6, 0);
904 agroup->setLayout(aLayout);
905
906 // Miscellaneous
907 // -------------
908 QGridLayout* rLayout = new QGridLayout;
909 rLayout->setColumnMinimumWidth(0,14*ww);
910 _perfIntrComboBox->setMaximumWidth(9*ww);
911 _miscPortLineEdit->setMaximumWidth(9*ww);
912
913 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port."),0, 0,1,30);
914 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
915 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1,7);
916 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
917 rLayout->addWidget(_perfIntrComboBox, 2, 1);
918 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
919 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
920 rLayout->addWidget(new QLabel("Port"), 4, 0);
921 rLayout->addWidget(_miscPortLineEdit, 4, 1);
922 rLayout->addWidget(new QLabel(" "), 5, 0);
923 rLayout->addWidget(new QLabel(" "), 6, 0);
924 rgroup->setLayout(rLayout);
925
926 // PPP Client
927 // ----------
928 QGridLayout* pppLayout = new QGridLayout;
929 pppLayout->setColumnMinimumWidth(0,14*ww);
930 _pppSigCLineEdit->setMaximumWidth(6*ww);
931 _pppSigPLineEdit->setMaximumWidth(6*ww);
932 _pppSigCrd0->setMaximumWidth(6*ww);
933 _pppSigCrdP->setMaximumWidth(6*ww);
934 _pppSigTrp0->setMaximumWidth(6*ww);
935 _pppSigTrpP->setMaximumWidth(6*ww);
936 _pppAverageLineEdit->setMaximumWidth(6*ww);
937 _pppQuickStartLineEdit->setMaximumWidth(6*ww);
938 _pppMaxSolGapLineEdit->setMaximumWidth(6*ww);
939 _pppAudioResponseLineEdit->setMaximumWidth(6*ww);
940 _pppRefCrdXLineEdit->setMaximumWidth(10*ww);
941 _pppRefCrdYLineEdit->setMaximumWidth(10*ww);
942 _pppRefCrdZLineEdit->setMaximumWidth(10*ww);
943 _pppRefdNLineEdit->setMaximumWidth(6*ww);
944 _pppRefdELineEdit->setMaximumWidth(6*ww);
945 _pppRefdULineEdit->setMaximumWidth(6*ww);
946 _pppSync->setMaximumWidth(6*ww);
947 _pppSPPComboBox->setMinimumWidth(15*ww);
948
949 _postObsFileChooser = new qtFileChooser;
950 _postObsFileChooser->setFileName(settings.value("postObsFile").toString());
951 _postObsFileChooser->setMinimumWidth(15*ww);
952 _postNavFileChooser = new qtFileChooser;
953 _postNavFileChooser->setFileName(settings.value("postNavFile").toString());
954 _postNavFileChooser->setMinimumWidth(15*ww);
955 _postCorrFileChooser = new qtFileChooser;
956 _postCorrFileChooser->setFileName(settings.value("postCorrFile").toString());
957 _postCorrFileChooser->setMinimumWidth(15*ww);
958 _postOutLineEdit = new QLineEdit(settings.value("postOutFile").toString());
959 _postOutLineEdit->setMinimumWidth(15*ww);
960
961 int ir = 0;
962 pppLayout->addWidget(new QLabel("Precise Point Positioning, Panel 1."), ir, 0, 1, 2, Qt::AlignLeft);
963 ++ir;
964 pppLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
965 pppLayout->addWidget(_pppSPPComboBox, ir, 1, Qt::AlignRight);
966 pppLayout->addWidget(_pppMountLineEdit, ir, 3, Qt::AlignRight);
967 pppLayout->addWidget(new QLabel("Obs."), ir, 4, Qt::AlignLeft);
968 pppLayout->addWidget(_pppCorrMountLineEdit, ir, 5, Qt::AlignRight);
969 pppLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
970 ++ir;
971 pppLayout->addWidget(new QLabel("Marker coordinates"), ir, 0, Qt::AlignLeft);
972 pppLayout->addWidget(_pppRefCrdXLineEdit, ir, 1, Qt::AlignRight);
973 pppLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
974 pppLayout->addWidget(_pppRefCrdYLineEdit, ir, 3, Qt::AlignRight);
975 pppLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
976 pppLayout->addWidget(_pppRefCrdZLineEdit, ir, 5, Qt::AlignRight);
977 pppLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
978 ++ir;
979 pppLayout->addWidget(new QLabel("Antenna excentricity"), ir, 0, Qt::AlignLeft);
980 pppLayout->addWidget(_pppRefdNLineEdit, ir, 1, Qt::AlignRight);
981 pppLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
982 pppLayout->addWidget(_pppRefdELineEdit, ir, 3, Qt::AlignRight);
983 pppLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
984 pppLayout->addWidget(_pppRefdULineEdit, ir, 5, Qt::AlignRight);
985 pppLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
986 ++ir;
987 pppLayout->addWidget(new QLabel("NMEA output"), ir, 0, Qt::AlignLeft);
988 pppLayout->addWidget(_pppNMEALineEdit, ir, 1, Qt::AlignRight);
989 pppLayout->addWidget(new QLabel("NMEA File"), ir, 2, Qt::AlignLeft);
990 pppLayout->addWidget(_pppNMEAPortLineEdit, ir, 3, Qt::AlignRight);
991 pppLayout->addWidget(new QLabel("NMEA Port"), ir, 4, Qt::AlignLeft);
992 ++ir;
993 pppLayout->addWidget(new QLabel("Post-processing"), ir, 0, Qt::AlignLeft);
994 pppLayout->addWidget(_postObsFileChooser, ir, 1, Qt::AlignRight);
995 pppLayout->addWidget(new QLabel("Obs "), ir, 2, Qt::AlignLeft);
996 pppLayout->addWidget(_postNavFileChooser, ir, 3, Qt::AlignRight);
997 pppLayout->addWidget(new QLabel("Nav "), ir, 4, Qt::AlignLeft);
998 ++ir;
999 pppLayout->addWidget(_postCorrFileChooser, ir, 1, Qt::AlignRight);
1000 pppLayout->addWidget(new QLabel("Corr"), ir, 2, Qt::AlignLeft);
1001 pppLayout->addWidget(_postOutLineEdit, ir, 3, Qt::AlignRight);
1002 pppLayout->addWidget(new QLabel("Log (full path)"), ir, 4, Qt::AlignLeft);
1003
1004 pppgroup->setLayout(pppLayout);
1005
1006 // PPP Client (second panel)
1007 // -------------------------
1008 QGridLayout* ppp2Layout = new QGridLayout;
1009 ppp2Layout->setColumnMinimumWidth(0,14*ww);
1010 ir = 0;
1011 ppp2Layout->addWidget(new QLabel("Precise Point Positioning, Panel 2."), ir, 0, 1, 10);
1012 ++ir;
1013 ppp2Layout->addWidget(new QLabel("Antennas"), ir, 0);
1014 ppp2Layout->addWidget(_pppAntexFileChooser, ir, 1,1,3);
1015 ppp2Layout->addWidget(new QLabel("ANTEX File"), ir, 4);
1016 ppp2Layout->addWidget(_pppAntennaLineEdit, ir, 5,1,3);
1017 ppp2Layout->addWidget(new QLabel("Antenna Name"), ir, 8);
1018 ++ir;
1019 ppp2Layout->addWidget(new QLabel("Basics"), ir, 0, 1, 5);
1020 ppp2Layout->addWidget(_pppUsePhaseCheckBox, ir, 1, Qt::AlignRight);
1021 ppp2Layout->addWidget(new QLabel("Use phase obs"), ir, 2);
1022 ppp2Layout->addWidget(_pppEstTropoCheckBox, ir, 3, Qt::AlignRight);
1023 ppp2Layout->addWidget(new QLabel("Estimate tropo"), ir, 4);
1024 ppp2Layout->addWidget(_pppGLONASSCheckBox, ir, 5, Qt::AlignRight);
1025 ppp2Layout->addWidget(new QLabel("Use GLONASS"), ir, 6);
1026 ppp2Layout->addWidget(_pppGalileoCheckBox, ir, 7, Qt::AlignRight);
1027 ppp2Layout->addWidget(new QLabel("Use Galileo "), ir, 8);
1028 ++ir;
1029 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1030 ppp2Layout->addWidget(_pppSync, ir, 1);
1031 ppp2Layout->addWidget(new QLabel("Sync Corr (sec) "), ir, 2);
1032 ppp2Layout->addWidget(_pppAverageLineEdit, ir, 3, Qt::AlignRight);
1033 ppp2Layout->addWidget(new QLabel("Averaging (min)") , ir, 4);
1034 ppp2Layout->addWidget(_pppQuickStartLineEdit, ir, 5, Qt::AlignRight);
1035 ppp2Layout->addWidget(new QLabel("Quick-Start (sec) "), ir, 6);
1036 ppp2Layout->addWidget(_pppMaxSolGapLineEdit, ir, 7, Qt::AlignRight);
1037 ppp2Layout->addWidget(new QLabel("Max Sol. Gap (sec)"), ir, 8);
1038 ++ir;
1039 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1040 ppp2Layout->addWidget(_pppAudioResponseLineEdit, ir, 1, Qt::AlignRight);
1041 ppp2Layout->addWidget(new QLabel("Audio response (m)"), ir, 2);
1042 ++ir;
1043 ppp2Layout->addWidget(new QLabel("Sigmas"), ir, 0);
1044 ppp2Layout->addWidget(_pppSigCLineEdit, ir, 1, Qt::AlignRight);
1045 ppp2Layout->addWidget(new QLabel("Code"), ir, 2);
1046 ppp2Layout->addWidget(_pppSigPLineEdit, ir, 3);
1047 ppp2Layout->addWidget(new QLabel("Phase"), ir, 4);
1048 ++ir;
1049 ppp2Layout->addWidget(new QLabel("Sigmas cont'd"), ir, 0);
1050 ppp2Layout->addWidget(_pppSigCrd0, ir, 1, Qt::AlignRight);
1051 ppp2Layout->addWidget(new QLabel("XYZ Init "), ir, 2);
1052 ppp2Layout->addWidget(_pppSigCrdP, ir, 3, Qt::AlignRight);
1053 ppp2Layout->addWidget(new QLabel("XYZ White Noise "), ir, 4);
1054 ppp2Layout->addWidget(_pppSigTrp0, ir, 5, Qt::AlignRight);
1055 ppp2Layout->addWidget(new QLabel("Tropo Init "), ir, 6);
1056 ppp2Layout->addWidget(_pppSigTrpP, ir, 7);
1057 ppp2Layout->addWidget(new QLabel("Tropo White Noise"), ir, 8);
1058 ++ir;
1059 ppp2Layout->addWidget(new QLabel(""), ir, 0);
1060
1061 ppp2group->setLayout(ppp2Layout);
1062
1063 // PPP Client (third panel)
1064 // ------------------------
1065 QVBoxLayout* ppp3Layout = new QVBoxLayout;
1066 ppp3Layout->addWidget(new QLabel("Precise Point Positioning, Panel 3."));
1067 ppp3Layout->addSpacing(ww);
1068
1069 QHBoxLayout* ppp3LayoutHlp1 = new QHBoxLayout;
1070 _pppPlotCoordinates = new QCheckBox();
1071 _pppPlotCoordinates->setCheckState(Qt::CheckState(settings.value("pppPlotCoordinates").toInt()));
1072 ppp3LayoutHlp1->addWidget(new QLabel("PPP Plot "));
1073 ppp3LayoutHlp1->addWidget(_pppPlotCoordinates);
1074 ppp3LayoutHlp1->addWidget(new QLabel("Nort-East-Up Time Series"));
1075 ppp3LayoutHlp1->addStretch();
1076 ppp3Layout->addLayout(ppp3LayoutHlp1);
1077 ppp3Layout->addSpacing(ww);
1078
1079 QHBoxLayout* ppp3LayoutHlp2 = new QHBoxLayout;
1080 ppp3LayoutHlp2->addWidget(new QLabel("Track Plot "));
1081 _mapWinButton = new QPushButton;
1082 _mapWinButton->setText("Open Map");
1083 connect(_mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1084 ppp3LayoutHlp2->addWidget(_mapWinButton);
1085
1086 ppp3LayoutHlp2->addSpacing(1*ww);
1087
1088 _gmRadioButton = new QRadioButton;
1089 _gmRadioButton->setChecked(!settings.value("useOsmMap").toBool());
1090 ppp3LayoutHlp2->addWidget(new QLabel("Google"));
1091 ppp3LayoutHlp2->addWidget(_gmRadioButton);
1092
1093 _osmRadioButton = new QRadioButton;
1094 _osmRadioButton->setChecked(settings.value("useOsmMap").toBool());
1095 ppp3LayoutHlp2->addWidget(new QLabel("OSM"));
1096 ppp3LayoutHlp2->addWidget(_osmRadioButton);
1097
1098 ppp3LayoutHlp2->addSpacing(3*ww);
1099
1100 _mapWinDotSizeLineEdit = new QLineEdit(settings.value("mapWinDotSize").toString());
1101 ppp3LayoutHlp2->addWidget(new QLabel("Dot Size"));
1102 _mapWinDotSizeLineEdit->setMaximumWidth(5*ww);
1103 ppp3LayoutHlp2->addWidget(_mapWinDotSizeLineEdit);
1104
1105 ppp3LayoutHlp2->addSpacing(3*ww);
1106
1107 _mapWinDotColorComboBox = new QComboBox();
1108 ppp3LayoutHlp2->addWidget(new QLabel("Dot Color"));
1109 _mapWinDotColorComboBox->setEditable(false);
1110 _mapWinDotColorComboBox->addItems(QString("red,yellow").split(","));
1111 ii = _mapWinDotColorComboBox->findText(settings.value("mapWinDotColor").toString());
1112 if (ii != -1) {
1113 _mapWinDotColorComboBox->setCurrentIndex(ii);
1114 }
1115 ppp3LayoutHlp2->addWidget(_mapWinDotColorComboBox);
1116
1117 ppp3LayoutHlp2->addSpacing(3*ww);
1118
1119 _mapSpeedSlider = new QSlider;
1120 _mapSpeedSlider->setOrientation(Qt::Horizontal);
1121 _mapSpeedSlider->setRange(1, 100);
1122 _mapSpeedSlider->setTickPosition(QSlider::TicksBelow);
1123 _mapSpeedSlider->setTickInterval(10);
1124 int speed = settings.value("mapSpeed").toInt();
1125 if (speed == 0) speed = _mapSpeedSlider->maximum();
1126 _mapSpeedSlider->setSliderPosition(speed);
1127 ppp3LayoutHlp2->addWidget(new QLabel("Speed"));
1128 ppp3LayoutHlp2->addWidget(_mapSpeedSlider);
1129
1130 ppp3LayoutHlp2->addStretch();
1131 ppp3Layout->addLayout(ppp3LayoutHlp2);
1132
1133 ppp3Layout->addStretch();
1134 ppp3group->setLayout(ppp3Layout);
1135
1136 // PPP NEW
1137 // -------
1138 QGridLayout* pppLayout1 = new QGridLayout();
1139 ir = 0;
1140 pppLayout1->addWidget(new QLabel("<b>Precise Point Positioning</b>"), ir, 0, 1, 7, Qt::AlignLeft);
1141 ++ir;
1142 pppLayout1->addWidget(new QLabel("Data Source"), ir, 0, Qt::AlignLeft);
1143 pppLayout1->addWidget(_pppWidgets._dataSource, ir, 1);
1144 pppLayout1->addItem(new QSpacerItem(4*ww, 0), ir, 2);
1145 pppLayout1->addWidget(new QLabel("RINEX Observations"), ir, 3, Qt::AlignLeft);
1146 pppLayout1->addWidget(_pppWidgets._rinexObs, ir, 4, 1, 2);
1147 ++ir;
1148 pppLayout1->addWidget(new QLabel("RINEX Orbits"), ir, 3, Qt::AlignLeft);
1149 pppLayout1->addWidget(_pppWidgets._rinexNav, ir, 4, 1, 2);
1150 ++ir;
1151 pppLayout1->addWidget(new QLabel("Corrections"), ir, 0, Qt::AlignLeft);
1152 pppLayout1->addWidget(_pppWidgets._corrHostPort, ir, 1);
1153 pppLayout1->addWidget(new QLabel("Corrections"), ir, 3, Qt::AlignLeft);
1154 pppLayout1->addWidget(_pppWidgets._corrFile, ir, 4, 1, 2);
1155 ++ir;
1156 pppLayout1->addWidget(new QLabel("<b>Input</b>"), ir, 0, Qt::AlignLeft);
1157 pppLayout1->addWidget(new QLabel("<b>Output</b>"), ir, 4, 1, 2, Qt::AlignLeft);
1158 ++ir;
1159 pppLayout1->addWidget(new QLabel("Coordinates"), ir, 0, Qt::AlignLeft);
1160 pppLayout1->addWidget(_pppWidgets._crdFile, ir, 1, 1, 2);
1161 pppLayout1->addWidget(new QLabel("Log File"), ir, 4, Qt::AlignLeft);
1162 pppLayout1->addWidget(_pppWidgets._logFile, ir, 5);
1163 ++ir;
1164 pppLayout1->addWidget(new QLabel("ANTEX"), ir, 0, Qt::AlignLeft);
1165 pppLayout1->addWidget(_pppWidgets._antexFile, ir, 1, 1, 2);
1166 pppLayout1->addWidget(new QLabel("NMEA File"), ir, 4, Qt::AlignLeft);
1167 pppLayout1->addWidget(_pppWidgets._nmeaFile, ir, 5);
1168 pppLayout1->addWidget(new QLabel("Port"), ir, 6, Qt::AlignLeft);
1169 pppLayout1->addWidget(_pppWidgets._nmeaPort, ir, 7);
1170
1171 pppGroup1->setLayout(pppLayout1);
1172
1173 QVBoxLayout* pppLayout2 = new QVBoxLayout();
1174 pppLayout2->addWidget(new QLabel("<b>Precise Point Positioning</b>"));
1175 pppLayout2->addWidget(_pppWidgets._staTable, 99);
1176
1177 pppGroup2->setLayout(pppLayout2);
1178
1179 QGridLayout* pppLayout3 = new QGridLayout();
1180 ir = 0;
1181 pppLayout3->addWidget(new QLabel("<b>Precise Point Positioning</b>"), ir, 0, 1, 7, Qt::AlignLeft);
1182 ++ir;
1183 pppLayout3->addWidget(new QLabel("GPS LCs"), ir, 0, Qt::AlignLeft);
1184 pppLayout3->addWidget(_pppWidgets._lcGPS, ir, 1);
1185 pppLayout3->addItem(new QSpacerItem(4*ww, 0), ir, 2);
1186 pppLayout3->addWidget(new QLabel("Sigma C1"), ir, 3, Qt::AlignLeft);
1187 pppLayout3->addWidget(_pppWidgets._sigmaC1, ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
1188 pppLayout3->addWidget(new QLabel("Sigma L1"), ir, 5, Qt::AlignLeft);
1189 pppLayout3->addWidget(_pppWidgets._sigmaL1, ir, 6); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
1190 ++ir;
1191 pppLayout3->addWidget(new QLabel("GLONASS LCs"), ir, 0, Qt::AlignLeft);
1192 pppLayout3->addWidget(_pppWidgets._lcGLONASS, ir, 1);
1193 ++ir;
1194 pppLayout3->addWidget(new QLabel("Galileo LCs"), ir, 0, Qt::AlignLeft);
1195 pppLayout3->addWidget(_pppWidgets._lcGalileo, ir, 1);
1196 ++ir;
1197 pppLayout3->addWidget(new QLabel("Wait for corrections"), ir, 0, Qt::AlignLeft);
1198 pppLayout3->addWidget(_pppWidgets._corrWaitTime, ir, 1);
1199
1200 pppGroup3->setLayout(pppLayout3);
1201
1202 // Reqc Processing
1203 // ---------------
1204 _reqcActionComboBox = new QComboBox();
1205 _reqcActionComboBox->setEditable(false);
1206 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1207 ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1208 if (ik != -1) {
1209 _reqcActionComboBox->setCurrentIndex(ik);
1210 }
1211 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1212 this, SLOT(slotBncTextChanged()));
1213
1214 QGridLayout* reqcLayout = new QGridLayout;
1215 _reqcActionComboBox->setMinimumWidth(15*ww);
1216 _reqcActionComboBox->setMaximumWidth(15*ww);
1217
1218 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1219 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1220 _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
1221 _reqcObsFileChooser->setMinimumWidth(15*ww);
1222 _reqcObsFileChooser->setMaximumWidth(15*ww);
1223
1224 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1225 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1226 _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
1227 _reqcNavFileChooser->setMinimumWidth(15*ww);
1228 _reqcNavFileChooser->setMaximumWidth(15*ww);
1229
1230 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1231 _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to a RINEX observation output file."));
1232 _reqcOutObsLineEdit->setMinimumWidth(15*ww);
1233 _reqcOutObsLineEdit->setMaximumWidth(15*ww);
1234
1235 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1236 _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to a RINEX navigation output file."));
1237 _reqcOutNavLineEdit->setMinimumWidth(15*ww);
1238 _reqcOutNavLineEdit->setMaximumWidth(15*ww);
1239
1240 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1241 _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1242 _reqcOutLogLineEdit->setMinimumWidth(15*ww);
1243 _reqcOutLogLineEdit->setMaximumWidth(15*ww);
1244
1245 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1246 _reqcPlotDirLineEdit->setWhatsThis(tr("Specify the directory name for saving plots."));
1247 _reqcPlotDirLineEdit->setMinimumWidth(15*ww);
1248 _reqcPlotDirLineEdit->setMaximumWidth(15*ww);
1249
1250 _reqcSkyPlotSystems = new QComboBox();
1251 _reqcSkyPlotSystems->setEditable(false);
1252 _reqcSkyPlotSystems->addItems(QString("ALL,GPS,GLONASS,Galileo").split(","));
1253 ik = _reqcSkyPlotSystems->findText(settings.value("reqcSkyPlotSystems").toString());
1254 if (ik != -1) {
1255 _reqcSkyPlotSystems->setCurrentIndex(ik);
1256 }
1257
1258 ir = 0;
1259 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check."),ir, 0, 1, 20);
1260 ++ir;
1261 reqcLayout->addWidget(new QLabel("Action"), ir, 0, Qt::AlignLeft);
1262 reqcLayout->addWidget(_reqcActionComboBox, ir, 1, Qt::AlignLeft);
1263 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1264 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3, Qt::AlignRight);
1265 ++ir;
1266 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0, Qt::AlignLeft);
1267 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1, Qt::AlignRight);
1268 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1269 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3, Qt::AlignRight);
1270 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1271 ++ir;
1272 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0, Qt::AlignLeft);
1273 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1, Qt::AlignRight);
1274 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1275 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3, Qt::AlignRight);
1276 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1277 ++ir;
1278 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1, Qt::AlignRight);
1279 reqcLayout->addWidget(new QLabel("Log"), ir, 2, Qt::AlignLeft);
1280 ++ir;
1281 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0, Qt::AlignLeft);
1282 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1, Qt::AlignRight);
1283 ++ir;
1284 reqcLayout->addWidget(new QLabel("Sky plots for"), ir, 0, Qt::AlignLeft);
1285 reqcLayout->addWidget(_reqcSkyPlotSystems, ir, 1, Qt::AlignRight);
1286 ++ir;
1287 reqcLayout->addWidget(new QLabel(""), ir, 1);
1288 reqcLayout->setRowStretch(ir, 999);
1289
1290 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1291 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1292
1293 reqcgroup->setLayout(reqcLayout);
1294
1295 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1296 this, SLOT(slotReqcEditOption()));
1297
1298 // Combine Corrections
1299 // -------------------
1300 QGridLayout* cmbLayout = new QGridLayout;
1301
1302 populateCmbTable();
1303 cmbLayout->addWidget(_cmbTable, 0, 0, 6, 3);
1304 cmbLayout->addWidget(new QLabel(" "), 0, 5);
1305 cmbLayout->addWidget(new QLabel("Combine Broadcast Correction streams."), 0, 6, 1, 50);
1306 cmbLayout->addWidget(new QLabel(" "), 1, 5);
1307 cmbLayout->addWidget(addCmbRowButton, 1, 6);
1308 cmbLayout->addWidget(delCmbRowButton, 1, 7);
1309 cmbLayout->addWidget(new QLabel(" "), 2, 5);
1310 cmbLayout->addWidget(new QLabel("Method"), 2, 6, Qt::AlignRight);
1311 cmbLayout->addWidget(_cmbMethodComboBox, 2, 7, Qt::AlignRight);
1312 cmbLayout->addWidget(new QLabel(" "), 3, 5);
1313 cmbLayout->addWidget(new QLabel("Maximal Residuum"), 3, 6, Qt::AlignRight);
1314 cmbLayout->addWidget(_cmbMaxresLineEdit, 3, 7, Qt::AlignRight);
1315 cmbLayout->addWidget(new QLabel(" "), 4, 5);
1316 cmbLayout->addWidget(new QLabel("Sampling"), 4, 6, Qt::AlignRight);
1317 cmbLayout->addWidget(_cmbSamplSpinBox, 4, 7, Qt::AlignRight);
1318 cmbLayout->addWidget(new QLabel(" "), 5, 0);
1319
1320 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1321 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1322
1323 cmbgroup->setLayout(cmbLayout);
1324
1325 // Upload Layout (Clocks)
1326 // ----------------------
1327 QGridLayout* uploadHlpLayout = new QGridLayout();
1328
1329 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1330 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1331 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1332
1333 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1334 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1335 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1336 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1337 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1338 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1339 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1340 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1341 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1342 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1343 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1344
1345 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1346 populateUploadTable();
1347
1348 uploadLayout->addWidget(new QLabel("Upload RTCMv3 Broadcast Corrections to caster."));
1349 uploadLayout->addWidget(_uploadTable);
1350 uploadLayout->addLayout(uploadHlpLayout);
1351
1352 uploadgroup->setLayout(uploadLayout);
1353
1354 // Upload Layout (Ephemeris)
1355 // -------------------------
1356 QGridLayout* uploadLayoutEph = new QGridLayout;
1357
1358 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1359 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1360 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1361 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1362
1363 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster."), 0, 0, 1, 50);
1364 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1365 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1366 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1367 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1368 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1369 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1370 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1371 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1372 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1373 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1374 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1375 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1376 uploadLayoutEph->addWidget(new QLabel(" "), 5, 0);
1377 uploadLayoutEph->addWidget(new QLabel(" "), 6, 0);
1378
1379 uploadEphgroup->setLayout(uploadLayoutEph);
1380
1381 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1382 this, SLOT(slotBncTextChanged()));
1383
1384 // Main Layout
1385 // -----------
1386 QGridLayout* mLayout = new QGridLayout;
1387 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1388 mLayout->addWidget(_aogroup, 0,0);
1389 mLayout->addWidget(_mountPointsTable, 1,0);
1390 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1391 mLayout->addWidget(_loggroup, 2,0);
1392
1393 _canvas->setLayout(mLayout);
1394
1395 // WhatsThis
1396 // ---------
1397 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1398 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1399 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1400 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1401 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1402 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1403 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1404 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1405 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1406 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1407 _corrTimeSpinBox->setWhatsThis(tr("<p>Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full corr epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application.</p><p>Specifying a value of '0' means that BNC immediately outputs all incoming Broadcast Epemeris Corrections and does not drop any of them for latency reasons.</p>"));
1408 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1409 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1410 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1411 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1412 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1413 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1414 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1415 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1416
1417 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1418 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1419 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1420 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1421 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1422 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1423 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1424 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1425 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1426 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1427 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1428 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1429 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster. The default values can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1430 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1431 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1432 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1433 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1434 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1435 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1436 _miscPortLineEdit->setWhatsThis(tr("BNC can output an incoming stream through a TCP/IP port of your local host. Specify a port number here to activate this function."));
1437 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1438 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p>"));
1439 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1440 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1441 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1442 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1443 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1444 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1445 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA-GGA messages coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' only when handling a VRS stream and your serial connected receiver doesn't generate NMEA-GGA messages.</p>"));
1446 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
1447 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
1448 _pppMountLineEdit->setWhatsThis(tr("<p>Specify an observations stream by its mountpoint from the 'Streams' list compiled below if you want BNC to estimate coordinates for the affected receiver position through a PPP solution. Example: 'FFMJ1'</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris referring to the satellites' Antenna Phase Centers (APC). Stream CLK11 on NTRIP broadcaster products.igs-ip.net is an example.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver in low repetition rate or don't come at all from there.</p>"));
1449 _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'. Corrections must refer to satellite Antenna Phase Centers (APC).</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combine Corrections' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
1450 _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
1451 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check following UNAVCO's famous 'teqc' program.</p>"));
1452 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1453 _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
1454 _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
1455 _pppGLONASSCheckBox->setWhatsThis(tr("<p>By default BNC does not use GLONASS observations in PPP mode.</p><p>Tick 'Use GLONASS' for adding GLONASS observations to GPS and Galileo (optional) in a PPP solution.</p>"));
1456 _pppGalileoCheckBox->setWhatsThis(tr("<p>By default BNC does not use Galileo observations in PPP mode.</p><p>Tick 'Use Galileo' for adding Galileo observations to GPS and GLONASS (optional) in a PPP solution.</p>"));
1457 _pppPlotCoordinates->setWhatsThis(tr("<p>BNC will plot PPP results in the 'PPP Plot' tab as North (red), East (green) and Up (blue) displacements when this option is selected. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes.</p><p>Note that a PPP time series makes only sense for a stationary operated receiver."));
1458 _mapWinButton->setWhatsThis(tr("<p>You make like to track your rover position using Google Maps or Open Street Map as a background map. Track plots can be produced with BNC in 'Realtime-PPP', 'Realtime-SPP' and 'Post-Processing' mode.</p><p>The 'Open Map' button opens a windows showing a map according to specified options.</p><p>When in 'Post-Processing' mode you should not forget to specify a proxy under the 'Network' tab if that is operated in front of BNC."));
1459 _gmRadioButton->setWhatsThis(tr("<p>Specify Google Maps as the background for your rover positions."));
1460 _osmRadioButton->setWhatsThis(tr("<p>Specify Open Street Map as the background for your rover positions."));
1461 _mapWinDotSizeLineEdit->setWhatsThis(tr("<p>Specify the size of dots showing the rover positions.</p><p>A dot size of '3' may be appropriate. The maximum possible dot size is '10'. An empty option field or a size of '0' would mean that you don't want BNC to show the rover's track on the map.</p>"));
1462 _mapWinDotColorComboBox->setWhatsThis(tr("<p>Specify the color of dots showing the rover track.</p>"));
1463 _mapSpeedSlider->setWhatsThis(tr("<p>With BNC in PPP post-processing mode you can specify the speed of computations as appropriate for visualization. Note that you can adjust 'Speed' on-the-fly while BNC is already processing your observations."));
1464 _pppNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where PPP results are saved as NMEA messages.</p>"));
1465 _pppNMEAPortLineEdit->setWhatsThis(tr("<p>Specify an IP port number to output PPP results as NMEA messages through an IP port.</p>"));
1466 _pppSigCLineEdit->setWhatsThis(tr("<p>Enter a sigma for your code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of code observations to a PPP solution based on a combination of code and phase data. 5.0 (default) is likely to be an appropriate choice.</p>"));
1467 _pppQuickStartLineEdit->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solution to a known XYZ coordinate as introduced above and adjust a sigma 'XYZ Ini' according to the coordinate's precision. Fixing the coordinate is done in BNC through setting the 'Sigma XYZ Noise' you define below temporarily to zero.</p><p>This so-called Quick-Start option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the know position throughout the startup period.</p><p>A value of 120 is likely to be an appropriate choice for 'Quick-Start'. Default is an empty option field, meaning that you don't want BNC to operate in Quick-Start mode.</p>"));
1468 _pppMaxSolGapLineEdit->setWhatsThis(tr("<p>Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive solutions exceed this limit, the algorithm returns into Quick-Start mode and fixes the introduced reference coordinate for the specified period. A value of '60' seconds could be an appropriate choice.</p><p>This option makes only sense for a stationary operated receiver where solution convergence can be enforced because a good approximation for the rover position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages.</p>"));
1469 _pppAudioResponseLineEdit->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
1470 _pppSigPLineEdit->setWhatsThis(tr("<p>Enter a sigma for your phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of phase observations to a PPP solutions based on a combination of code and phase data. 0.02 (default) is likely to be an appropriate choice.</p>"));
1471 _pppAverageLineEdit->setWhatsThis(tr("<p>Enter the length of a sliding time window in minutes. BNC will continuously output moving average positions computed from those individual positions obtained most recently throughout this period.</p><p>An empty option field (default) means that you don't want BNC to output moving average positions.</p>"));
1472 _pppSigCrd0->setWhatsThis(tr("<p>Enter a sigma in meters for the initial XYZ coordinate componentes. A value of 100.0 (default) may be an appropriate choice. However, this value may be significantly smaller (i.e. 0.01) when starting for example from a station with known XZY position in Quick-Start mode."));
1473 _pppSigCrdP->setWhatsThis(tr("<p>Enter a sigma in meters for the white noise of estimated XYZ coordinate components. A value of 100.0 (default) may be appropriate considering the potential movement of a rover position.</p>"));
1474 _pppSigTrp0->setWhatsThis(tr("<p>Enter a sigma in meters for the a-priory model based tropospheric delay estimation. A value of 0.1 (default) may be an appropriate choice.</p>"));
1475 _pppSigTrpP->setWhatsThis(tr("<p>Enter a sigma in meters per second to describe the expected variation of the tropospheric effect.</p><p>Supposing 1Hz observation data, a value of 3e-6 (default) would mean that the tropospheric effect may vary for 3600 * 3e-6 = 0.01 meters per hour.</p>"));
1476 _pppRefCrdXLineEdit->setWhatsThis(tr("<p>Enter reference coordinate X of the receiver's position.</p><p>This option only makes sense in static observation conditions.</p>"));
1477 _pppRefCrdYLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Y of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1478 _pppRefCrdZLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Z of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1479 _pppRefdNLineEdit->setWhatsThis(tr("<p>Enter north antenna excentricity.</p>"));
1480 _pppRefdELineEdit->setWhatsThis(tr("<p>Enter east antenna excentricity.</p>"));
1481 _pppRefdULineEdit->setWhatsThis(tr("<p>Enter up antenna excentricity.</p>"));
1482 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1483 _pppSync->setWhatsThis(tr(
1484 "<p> Zero value (or empty field, default) means that BNC processes each epoch of data "
1485 "immediately after its arrival using satellite clock corrections available at "
1486 "that time.</p><p> Non-zero value 'Sync Corr' (i.e. 5) means that the epochs of data "
1487 "are buffered and the processing of each epoch is postponed till the satellite clock "
1488 "corrections not older than 'Sync Corr' seconds are available.<p>"));
1489 _pppAntexFileChooser->setWhatsThis(tr("<p>IGS provides a file containing absolute phase center corrections for GNSS satellite and receiver antennas in ANTEX format. Entering the full path to such an ANTEX file is required for correcting observations for antenna phase center offsets and variations. It allows you to specify the name of your receiver's antenna (as contained in the ANTEX file) to apply such corrections.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets and variations.</p>"));
1490 _pppAntennaLineEdit->setWhatsThis(tr("<p>Specify the receiver's antenna name as defined in your ANTEX file. Observations will be corrected for the antenna phase center's offset which may result in a reduction of a few centimeters at max. Corrections for phase center variations are not yet applied by BNC. The specified name must consist of 20 characters. Add trailing blanks if the antenna name has less then 20 characters.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets.</p>"));
1491 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.<ul><li>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</li><li>Note also that you need to tick 'Use GLONASS' which is part ot the 'PPP (2)' panel in case you want to produce an GPS plus GLONASS combination.</li></ul></p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1492 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1493 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval. Clock and orbit corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1494 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1495 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><ul><li>As an SP3 file contents should be referred to the satellites Center of Mass (CoM) while correctors are referred to the satellites Antenna Phase Center (APC), an offset has to be applied which is available from an IGS ANTEX file. You should therefore specify the 'ANTEX File' path under tab 'PPP (2)' if you want to save the stream contents in SP3 format. If you don't specify an 'ANTEX File' path there, the SP3 file contents will be referred to the satellites APCs.</li></ul></p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1496 _postObsFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Observation file."));
1497 _postNavFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Navigation file."));
1498 _postCorrFileChooser->setWhatsThis(tr("Full path to Broadcast Corrections file as previously saved with BNC in plain ASCII format."));
1499 _postOutLineEdit->setWhatsThis(tr("Full path to file with post processing PPP results. "));
1500 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1501 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1502 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1503 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1504 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1505 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1506 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1507 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1508 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1509
1510 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1511 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1512 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1513 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1514 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1515 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1516
1517 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1518 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1519 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1520
1521 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1522 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1523// Weber
1524
1525 // Enable/Disable all Widgets
1526 // --------------------------
1527 slotBncTextChanged();
1528 enableStartStop();
1529
1530 // Auto start
1531 // ----------
1532 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1533 slotStart();
1534 }
1535}
1536
1537// Destructor
1538////////////////////////////////////////////////////////////////////////////
1539bncWindow::~bncWindow() {
1540 delete _caster;
1541 delete _casterEph;
1542}
1543
1544//
1545////////////////////////////////////////////////////////////////////////////
1546void bncWindow::populateMountPointsTable() {
1547
1548 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1549 _mountPointsTable->removeRow(iRow);
1550 }
1551
1552 bncSettings settings;
1553
1554 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1555 int iRow = 0;
1556 while (it.hasNext()) {
1557 QStringList hlp = it.next().split(" ");
1558 if (hlp.size() < 5) continue;
1559 _mountPointsTable->insertRow(iRow);
1560
1561 QUrl url(hlp[0]);
1562
1563 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1564 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1565 QString nmea(hlp[4]);
1566 if (hlp[5] == "S") {
1567 fullPath = hlp[0].replace(0,2,"");
1568 }
1569 QString ntripVersion = "2";
1570 if (hlp.size() >= 6) {
1571 ntripVersion = (hlp[5]);
1572 }
1573
1574 QTableWidgetItem* it;
1575 it = new QTableWidgetItem(url.userInfo());
1576 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1577 _mountPointsTable->setItem(iRow, 0, it);
1578
1579 it = new QTableWidgetItem(fullPath);
1580 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1581 _mountPointsTable->setItem(iRow, 1, it);
1582
1583 it = new QTableWidgetItem(format);
1584 _mountPointsTable->setItem(iRow, 2, it);
1585
1586 if (nmea == "yes") {
1587 it = new QTableWidgetItem(latitude);
1588 _mountPointsTable->setItem(iRow, 3, it);
1589 it = new QTableWidgetItem(longitude);
1590 _mountPointsTable->setItem(iRow, 4, it);
1591 } else {
1592 it = new QTableWidgetItem(latitude);
1593 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1594 _mountPointsTable->setItem(iRow, 3, it);
1595 it = new QTableWidgetItem(longitude);
1596 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1597 _mountPointsTable->setItem(iRow, 4, it);
1598 }
1599
1600 it = new QTableWidgetItem(nmea);
1601 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1602 _mountPointsTable->setItem(iRow, 5, it);
1603
1604 it = new QTableWidgetItem(ntripVersion);
1605 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1606 _mountPointsTable->setItem(iRow, 6, it);
1607
1608 bncTableItem* bncIt = new bncTableItem();
1609 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1610 _mountPointsTable->setItem(iRow, 7, bncIt);
1611
1612 iRow++;
1613 }
1614
1615 _mountPointsTable->sortItems(1);
1616
1617 enableStartStop();
1618}
1619
1620// Retrieve Table
1621////////////////////////////////////////////////////////////////////////////
1622void bncWindow::slotAddMountPoints() {
1623
1624 bncSettings settings;
1625 QString proxyHost = settings.value("proxyHost").toString();
1626 int proxyPort = settings.value("proxyPort").toInt();
1627 if (proxyHost != _proxyHostLineEdit->text() ||
1628 proxyPort != _proxyPortLineEdit->text().toInt()) {
1629 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1630 "changed. Use the new ones?",
1631 QMessageBox::Yes, QMessageBox::No,
1632 QMessageBox::NoButton);
1633 if (iRet == QMessageBox::Yes) {
1634 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1635 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1636 }
1637 }
1638
1639 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1640 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1641
1642 QMessageBox msgBox;
1643 msgBox.setIcon(QMessageBox::Question);
1644 msgBox.setWindowTitle("Add Stream");
1645 msgBox.setText("Add stream(s) coming from:");
1646
1647 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1648 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1649 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1650 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1651 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1652
1653 msgBox.exec();
1654
1655 if (msgBox.clickedButton() == buttonNtrip) {
1656 bncTableDlg* dlg = new bncTableDlg(this);
1657 dlg->move(this->pos().x()+50, this->pos().y()+50);
1658 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1659 this, SLOT(slotNewMountPoints(QStringList*)));
1660 dlg->exec();
1661 delete dlg;
1662 } else if (msgBox.clickedButton() == buttonIP) {
1663 bncIpPort* ipp = new bncIpPort(this);
1664 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1665 this, SLOT(slotNewMountPoints(QStringList*)));
1666 ipp->exec();
1667 delete ipp;
1668 } else if (msgBox.clickedButton() == buttonUDP) {
1669 bncUdpPort* udp = new bncUdpPort(this);
1670 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1671 this, SLOT(slotNewMountPoints(QStringList*)));
1672 udp->exec();
1673 delete udp;
1674 } else if (msgBox.clickedButton() == buttonSerial) {
1675 bncSerialPort* sep = new bncSerialPort(this);
1676 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1677 this, SLOT(slotNewMountPoints(QStringList*)));
1678 sep->exec();
1679 delete sep;
1680 } else if (msgBox.clickedButton() == buttonCancel) {
1681 // Cancel
1682 }
1683
1684 enableStartStop();
1685}
1686
1687// Delete Selected Mount Points
1688////////////////////////////////////////////////////////////////////////////
1689void bncWindow::slotDeleteMountPoints() {
1690
1691 int nRows = _mountPointsTable->rowCount();
1692 bool flg[nRows];
1693 for (int iRow = 0; iRow < nRows; iRow++) {
1694 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1695 flg[iRow] = true;
1696 }
1697 else {
1698 flg[iRow] = false;
1699 }
1700 }
1701 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1702 if (flg[iRow]) {
1703 _mountPointsTable->removeRow(iRow);
1704 }
1705 }
1706 _actDeleteMountPoints->setEnabled(false);
1707
1708 enableStartStop();
1709}
1710
1711// New Mount Points Selected
1712////////////////////////////////////////////////////////////////////////////
1713void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1714 int iRow = 0;
1715 QListIterator<QString> it(*mountPoints);
1716 while (it.hasNext()) {
1717 QStringList hlp = it.next().split(" ");
1718 QUrl url(hlp[0]);
1719 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1720 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1721 QString nmea(hlp[4]);
1722 if (hlp[5] == "S") {
1723 fullPath = hlp[0].replace(0,2,"");
1724 }
1725 QString ntripVersion = "2";
1726 if (hlp.size() >= 6) {
1727 ntripVersion = (hlp[5]);
1728 }
1729
1730 _mountPointsTable->insertRow(iRow);
1731
1732 QTableWidgetItem* it;
1733 it = new QTableWidgetItem(url.userInfo());
1734 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1735 _mountPointsTable->setItem(iRow, 0, it);
1736
1737 it = new QTableWidgetItem(fullPath);
1738 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1739 _mountPointsTable->setItem(iRow, 1, it);
1740
1741 it = new QTableWidgetItem(format);
1742 _mountPointsTable->setItem(iRow, 2, it);
1743
1744 if (nmea == "yes") {
1745 it = new QTableWidgetItem(latitude);
1746 _mountPointsTable->setItem(iRow, 3, it);
1747 it = new QTableWidgetItem(longitude);
1748 _mountPointsTable->setItem(iRow, 4, it);
1749 } else {
1750 it = new QTableWidgetItem(latitude);
1751 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1752 _mountPointsTable->setItem(iRow, 3, it);
1753 it = new QTableWidgetItem(longitude);
1754 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1755 _mountPointsTable->setItem(iRow, 4, it);
1756 }
1757
1758 it = new QTableWidgetItem(nmea);
1759 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1760 _mountPointsTable->setItem(iRow, 5, it);
1761
1762 it = new QTableWidgetItem(ntripVersion);
1763 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1764 _mountPointsTable->setItem(iRow, 6, it);
1765
1766 bncTableItem* bncIt = new bncTableItem();
1767 _mountPointsTable->setItem(iRow, 7, bncIt);
1768
1769 iRow++;
1770 }
1771 _mountPointsTable->hideColumn(0);
1772 _mountPointsTable->sortItems(1);
1773 delete mountPoints;
1774
1775 enableStartStop();
1776}
1777
1778// Save Options (serialize)
1779////////////////////////////////////////////////////////////////////////////
1780void bncWindow::slotSaveOptions() {
1781 saveOptions();
1782 bncSettings settings;
1783 settings.sync();
1784}
1785
1786// Save Options (memory only)
1787////////////////////////////////////////////////////////////////////////////
1788void bncWindow::saveOptions() {
1789
1790 QStringList mountPoints;
1791 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1792
1793 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1794 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1795 "@" + _mountPointsTable->item(iRow, 1)->text() );
1796
1797 mountPoints.append(url.toString() + " " +
1798 _mountPointsTable->item(iRow, 2)->text()
1799 + " " + _mountPointsTable->item(iRow, 3)->text()
1800 + " " + _mountPointsTable->item(iRow, 4)->text()
1801 + " " + _mountPointsTable->item(iRow, 5)->text()
1802 + " " + _mountPointsTable->item(iRow, 6)->text());
1803 } else {
1804 mountPoints.append(
1805 "//" + _mountPointsTable->item(iRow, 1)->text()
1806 + " " + _mountPointsTable->item(iRow, 2)->text()
1807 + " " + _mountPointsTable->item(iRow, 3)->text()
1808 + " " + _mountPointsTable->item(iRow, 4)->text()
1809 + " " + _mountPointsTable->item(iRow, 5)->text()
1810 + " " + _mountPointsTable->item(iRow, 6)->text());
1811 }
1812 }
1813
1814 QStringList combineStreams;
1815 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1816 QString hlp;
1817 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1818 if (_cmbTable->item(iRow, iCol)) {
1819 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1820 }
1821 }
1822 if (!hlp.isEmpty()) {
1823 combineStreams << hlp;
1824 }
1825 }
1826
1827 QStringList uploadMountpointsOut;
1828 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1829 QString hlp;
1830 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1831 if (_uploadTable->cellWidget(iRow, iCol) &&
1832 (iCol == 3 || iCol == 4 || iCol == 5)) {
1833 if (iCol == 3) {
1834 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1835 hlp += passwd->text() + ",";
1836 }
1837 else if (iCol == 4) {
1838 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1839 hlp += system->currentText() + ",";
1840 }
1841 else if (iCol == 5) {
1842 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1843 QString state; state.setNum(com->checkState());
1844 hlp += state + ",";
1845 }
1846 }
1847 else if (_uploadTable->item(iRow, iCol)) {
1848 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1849 }
1850 }
1851 if (!hlp.isEmpty()) {
1852 uploadMountpointsOut << hlp;
1853 }
1854 }
1855
1856 bncSettings settings;
1857
1858 settings.setValue("startTab", _aogroup->currentIndex());
1859 settings.setValue("statusTab", _loggroup->currentIndex());
1860 settings.setValue("mountPoints", mountPoints);
1861// Network
1862 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1863 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1864 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1865 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1866// General
1867 settings.setValue("logFile", _logFileLineEdit->text());
1868 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1869 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1870 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1871 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1872// RINEX Observations
1873 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1874 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1875 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1876 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1877 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1878 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1879// RINEX Ephemeris
1880 settings.setValue("ephPath", _ephPathLineEdit->text());
1881 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1882 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1883 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1884// Broadcast Corrections
1885 settings.setValue("corrPath", _corrPathLineEdit->text());
1886 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1887 settings.setValue("corrPort", _corrPortLineEdit->text());
1888 settings.setValue("corrTime", _corrTimeSpinBox->value());
1889// Feed Engine
1890 settings.setValue("outPort", _outPortLineEdit->text());
1891 settings.setValue("waitTime", _waitTimeSpinBox->value());
1892 settings.setValue("binSampl", _binSamplSpinBox->value());
1893 settings.setValue("outFile", _outFileLineEdit->text());
1894 settings.setValue("outUPort", _outUPortLineEdit->text());
1895// Serial Output
1896 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1897 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1898 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1899 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1900 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1901 settings.setValue("serialParity", _serialParityComboBox->currentText());
1902 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1903 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1904 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1905 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1906// Outages
1907 settings.setValue("obsRate", _obsRateComboBox->currentText());
1908 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1909 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1910 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1911// Miscellaneous
1912 settings.setValue("miscMount", _miscMountLineEdit->text());
1913 settings.setValue("miscPort", _miscPortLineEdit->text());
1914 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1915 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1916// PPPP
1917 settings.setValue("pppSPP", _pppSPPComboBox->currentText());
1918 settings.setValue("pppMount", _pppMountLineEdit->text());
1919 settings.setValue("pppCorrMount",_pppCorrMountLineEdit->text());
1920 settings.setValue("pppRefCrdX", _pppRefCrdXLineEdit->text());
1921 settings.setValue("pppRefCrdY", _pppRefCrdYLineEdit->text());
1922 settings.setValue("pppRefCrdZ", _pppRefCrdZLineEdit->text());
1923 settings.setValue("pppRefdN", _pppRefdNLineEdit->text());
1924 settings.setValue("pppRefdE", _pppRefdELineEdit->text());
1925 settings.setValue("pppRefdU", _pppRefdULineEdit->text());
1926 settings.setValue("nmeaFile", _pppNMEALineEdit->text());
1927 settings.setValue("nmeaPort", _pppNMEAPortLineEdit->text());
1928 settings.setValue("pppPlotCoordinates", _pppPlotCoordinates->checkState());
1929 settings.setValue("useOsmMap", _osmRadioButton->isChecked());
1930 settings.setValue("mapWinDotSize", _mapWinDotSizeLineEdit->text());
1931 settings.setValue("mapWinDotColor", _mapWinDotColorComboBox->currentText());
1932 settings.setValue("mapSpeed", _mapSpeedSlider->value());
1933 settings.setValue("postObsFile", _postObsFileChooser->fileName());
1934 settings.setValue("postNavFile", _postNavFileChooser->fileName());
1935 settings.setValue("postCorrFile", _postCorrFileChooser->fileName());
1936 settings.setValue("postOutFile", _postOutLineEdit->text());
1937 settings.setValue("pppAntenna", _pppAntennaLineEdit->text());
1938 settings.setValue("pppAntex", _pppAntexFileChooser->fileName());
1939 settings.setValue("pppUsePhase", _pppUsePhaseCheckBox->checkState());
1940 settings.setValue("pppEstTropo", _pppEstTropoCheckBox->checkState());
1941 settings.setValue("pppGLONASS", _pppGLONASSCheckBox->checkState());
1942 settings.setValue("pppGalileo", _pppGalileoCheckBox->checkState());
1943 settings.setValue("pppSync", _pppSync->text());
1944 settings.setValue("pppAverage", _pppAverageLineEdit->text());
1945 settings.setValue("pppQuickStart", _pppQuickStartLineEdit->text());
1946 settings.setValue("pppMaxSolGap", _pppMaxSolGapLineEdit->text());
1947 settings.setValue("pppAudioResponse", _pppAudioResponseLineEdit->text());
1948 settings.setValue("pppSigmaCode",_pppSigCLineEdit->text());
1949 settings.setValue("pppSigmaPhase",_pppSigPLineEdit->text());
1950 settings.setValue("pppSigCrd0",_pppSigCrd0->text());
1951 settings.setValue("pppSigCrdP",_pppSigCrdP->text());
1952 settings.setValue("pppSigTrp0",_pppSigTrp0->text());
1953 settings.setValue("pppSigTrpP",_pppSigTrpP->text());
1954// Reqc
1955 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1956 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1957 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1958 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1959 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1960 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1961 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1962 settings.setValue("reqcSkyPlotSystems", _reqcSkyPlotSystems->currentText());
1963// Combine Corrections
1964 if (!combineStreams.isEmpty()) {
1965 settings.setValue("combineStreams", combineStreams);
1966 }
1967 else {
1968 settings.setValue("combineStreams", "");
1969 }
1970 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1971 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1972 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1973// Upload Corrections
1974 if (!uploadMountpointsOut.isEmpty()) {
1975 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1976 }
1977 else {
1978 settings.setValue("uploadMountpointsOut", "");
1979 }
1980 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1981 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1982 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1983 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1984// Upload Ephemeris
1985 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1986 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1987 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1988 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1989 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1990
1991 if (_caster) {
1992 _caster->readMountPoints();
1993 }
1994}
1995
1996// All get slots terminated
1997////////////////////////////////////////////////////////////////////////////
1998void bncWindow::slotGetThreadsFinished() {
1999 BNC_CORE->slotMessage("All Get Threads Terminated", true);
2000 delete _caster; _caster = 0;
2001 delete _casterEph; _casterEph = 0;
2002 _runningRealTime = false;
2003}
2004
2005// Start It!
2006////////////////////////////////////////////////////////////////////////////
2007void bncWindow::slotStart() {
2008 saveOptions();
2009 if ( _pppSPPComboBox->currentText() == "Post-Processing" ) {
2010 startPostProcessingPPP();
2011 }
2012 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2013 startPostProcessingReqc();
2014 }
2015 else {
2016 startRealTime();
2017 }
2018}
2019
2020// Start Real-Time (Retrieve Data etc.)
2021////////////////////////////////////////////////////////////////////////////
2022void bncWindow::startRealTime() {
2023
2024 _runningRealTime = true;
2025
2026 _bncFigurePPP->reset();
2027
2028 _actDeleteMountPoints->setEnabled(false);
2029
2030 enableStartStop();
2031
2032 _caster = new bncCaster();
2033
2034 BNC_CORE->setPort(_outEphPortLineEdit->text().toInt());
2035 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2036 BNC_CORE->initCombination();
2037
2038 connect(_caster, SIGNAL(getThreadsFinished()),
2039 this, SLOT(slotGetThreadsFinished()));
2040
2041 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2042 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2043
2044 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " =========", true);
2045
2046 bncSettings settings;
2047
2048 QDir rnxdir(settings.value("rnxPath").toString());
2049 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2050
2051 QString rnx_file = settings.value("rnxScript").toString();
2052 if ( !rnx_file.isEmpty() ) {
2053 QFile rnxfile(settings.value("rnxScript").toString());
2054 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2055 }
2056
2057 QDir ephdir(settings.value("ephPath").toString());
2058 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2059
2060 QDir corrdir(settings.value("corrPath").toString());
2061 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2062
2063 QString advise_file = settings.value("adviseScript").toString();
2064 if ( !advise_file.isEmpty() ) {
2065 QFile advisefile(settings.value("adviseScript").toString());
2066 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2067 }
2068
2069 QString ant_file = settings.value("pppAntex").toString();
2070 if ( !ant_file.isEmpty() ) {
2071 QFile anxfile(settings.value("pppAntex").toString());
2072 if (!anxfile.exists()) BNC_CORE->slotMessage("Cannot find IGS ANTEX file", true);
2073 }
2074
2075 _caster->readMountPoints();
2076
2077 _casterEph = new bncEphUploadCaster();
2078 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2079 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2080}
2081
2082// Retrieve Data
2083////////////////////////////////////////////////////////////////////////////
2084void bncWindow::slotStop() {
2085 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
2086 QMessageBox::Yes, QMessageBox::No,
2087 QMessageBox::NoButton);
2088 if (iRet == QMessageBox::Yes) {
2089 BNC_CORE->stopCombination();
2090 delete _caster; _caster = 0;
2091 delete _casterEph; _casterEph = 0;
2092 _runningRealTime = false;
2093 enableStartStop();
2094 }
2095}
2096
2097// Close Application gracefully
2098////////////////////////////////////////////////////////////////////////////
2099void bncWindow::closeEvent(QCloseEvent* event) {
2100
2101 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2102 QMessageBox::Yes, QMessageBox::No,
2103 QMessageBox::Cancel);
2104
2105 if (iRet == QMessageBox::Cancel) {
2106 event->ignore();
2107 return;
2108 }
2109 else if (iRet == QMessageBox::Yes) {
2110 slotSaveOptions();
2111 }
2112
2113 if (_postProcessing) {
2114 _postProcessing->terminate();
2115 }
2116
2117 QMainWindow::closeEvent(event);
2118}
2119
2120// User changed the selection of mountPoints
2121////////////////////////////////////////////////////////////////////////////
2122void bncWindow::slotSelectionChanged() {
2123 if (_mountPointsTable->selectedItems().isEmpty()) {
2124 _actDeleteMountPoints->setEnabled(false);
2125 }
2126 else {
2127 _actDeleteMountPoints->setEnabled(true);
2128 }
2129}
2130
2131// Display Program Messages
2132////////////////////////////////////////////////////////////////////////////
2133void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2134
2135#ifdef DEBUG_RTCM2_2021
2136 const int maxBufferSize = 1000;
2137#else
2138 const int maxBufferSize = 10000;
2139#endif
2140
2141 if (! showOnScreen ) {
2142 return;
2143 }
2144
2145 QString txt = _log->toPlainText() + "\n" +
2146 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
2147 _log->clear();
2148 _log->append(txt.right(maxBufferSize));
2149}
2150
2151// About Message
2152////////////////////////////////////////////////////////////////////////////
2153void bncWindow::slotAbout() {
2154 new bncAboutDlg(0);
2155}
2156
2157//Flowchart
2158////////////////////////////////////////////////////////////////////////////
2159void bncWindow::slotFlowchart() {
2160 new bncFlowchartDlg(0);
2161}
2162
2163// Help Window
2164////////////////////////////////////////////////////////////////////////////
2165void bncWindow::slotHelp() {
2166 QUrl url;
2167 url.setPath(":bnchelp.html");
2168 new bncHlpDlg(0, url);
2169}
2170
2171// Select Fonts
2172////////////////////////////////////////////////////////////////////////////
2173void bncWindow::slotFontSel() {
2174 bool ok;
2175 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2176 if (ok) {
2177 bncSettings settings;
2178 settings.setValue("font", newFont.toString());
2179 QApplication::setFont(newFont);
2180 int ww = QFontMetrics(newFont).width('w');
2181 setMinimumSize(60*ww, 80*ww);
2182 resize(60*ww, 80*ww);
2183 }
2184}
2185
2186// Whats This Help
2187void bncWindow::slotWhatsThis() {
2188 QWhatsThis::enterWhatsThisMode();
2189}
2190
2191//
2192////////////////////////////////////////////////////////////////////////////
2193void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2194 _threads = threads;
2195
2196 _bncFigure->updateMountPoints();
2197 _bncFigureLate->updateMountPoints();
2198
2199 populateMountPointsTable();
2200 bncSettings settings;
2201 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
2202 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
2203 QListIterator<bncGetThread*> iTh(threads);
2204 while (iTh.hasNext()) {
2205 bncGetThread* thread = iTh.next();
2206 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2207 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2208 "@" + _mountPointsTable->item(iRow, 1)->text() );
2209 if (url == thread->mountPoint() &&
2210 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
2211 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
2212 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
2213 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2214 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2215 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2216 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2217 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2218 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2219 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2220 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2221 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2222 disconnect(thread,
2223 SIGNAL(newPosition(bncTime, double, double, double)),
2224 _bncFigurePPP,
2225 SLOT(slotNewPosition(bncTime, double, double, double)));
2226 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2227 _bncFigurePPP,
2228 SLOT(slotNewPosition(bncTime, double, double, double)));
2229 }
2230#ifdef QT_WEBKIT
2231 if (_mapWin) {
2232 disconnect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2233 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2234 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2235 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2236 }
2237#endif
2238 break;
2239 }
2240 }
2241 }
2242}
2243
2244//
2245////////////////////////////////////////////////////////////////////////////
2246void bncWindow::CreateMenu() {
2247 // Create Menus
2248 // ------------
2249 _menuFile = menuBar()->addMenu(tr("&File"));
2250 _menuFile->addAction(_actFontSel);
2251 _menuFile->addSeparator();
2252 _menuFile->addAction(_actSaveOpt);
2253 _menuFile->addSeparator();
2254 _menuFile->addAction(_actQuit);
2255
2256 _menuHlp = menuBar()->addMenu(tr("&Help"));
2257 _menuHlp->addAction(_actHelp);
2258 _menuHlp->addAction(_actFlowchart);
2259 _menuHlp->addAction(_actAbout);
2260}
2261
2262// Toolbar
2263////////////////////////////////////////////////////////////////////////////
2264void bncWindow::AddToolbar() {
2265 QToolBar* toolBar = new QToolBar;
2266 addToolBar(Qt::BottomToolBarArea, toolBar);
2267 toolBar->setMovable(false);
2268 toolBar->addAction(_actAddMountPoints);
2269 toolBar->addAction(_actDeleteMountPoints);
2270 toolBar->addAction(_actMapMountPoints);
2271 toolBar->addAction(_actStart);
2272 toolBar->addAction(_actStop);
2273 toolBar->addWidget(new QLabel(" "));
2274 toolBar->addAction(_actwhatsthis);
2275}
2276
2277// About
2278////////////////////////////////////////////////////////////////////////////
2279bncAboutDlg::bncAboutDlg(QWidget* parent) :
2280 QDialog(parent) {
2281
2282 QTextBrowser* tb = new QTextBrowser;
2283 QUrl url; url.setPath(":bncabout.html");
2284 tb->setSource(url);
2285 tb->setReadOnly(true);
2286
2287 int ww = QFontMetrics(font()).width('w');
2288 QPushButton* _closeButton = new QPushButton("Close");
2289 _closeButton->setMaximumWidth(10*ww);
2290 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2291
2292 QGridLayout* dlgLayout = new QGridLayout();
2293 QLabel* img = new QLabel();
2294 img->setPixmap(QPixmap(":ntrip-logo.png"));
2295 dlgLayout->addWidget(img, 0,0);
2296 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2297 dlgLayout->addWidget(tb,1,0,1,2);
2298 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2299
2300 setLayout(dlgLayout);
2301 resize(60*ww, 60*ww);
2302 setWindowTitle("About BNC");
2303 show();
2304}
2305
2306//
2307////////////////////////////////////////////////////////////////////////////
2308bncAboutDlg::~bncAboutDlg() {
2309};
2310
2311// Flowchart
2312////////////////////////////////////////////////////////////////////////////
2313bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2314 QDialog(parent) {
2315
2316 int ww = QFontMetrics(font()).width('w');
2317 QPushButton* _closeButton = new QPushButton("Close");
2318 _closeButton->setMaximumWidth(10*ww);
2319 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2320
2321 QGridLayout* dlgLayout = new QGridLayout();
2322 QLabel* img = new QLabel();
2323 img->setPixmap(QPixmap(":bncflowchart.png"));
2324 dlgLayout->addWidget(img, 0,0);
2325 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2326
2327 setLayout(dlgLayout);
2328 setWindowTitle("Flow Chart");
2329 show();
2330}
2331
2332//
2333////////////////////////////////////////////////////////////////////////////
2334bncFlowchartDlg::~bncFlowchartDlg() {
2335};
2336
2337// Enable/Disable Widget (and change its color)
2338////////////////////////////////////////////////////////////////////////////
2339void bncWindow::enableWidget(bool enable, QWidget* widget) {
2340 const static QPalette paletteWhite(QColor(255, 255, 255));
2341 const static QPalette paletteGray(QColor(230, 230, 230));
2342
2343 widget->setEnabled(enable);
2344 if (enable) {
2345 widget->setPalette(paletteWhite);
2346 }
2347 else {
2348 widget->setPalette(paletteGray);
2349 }
2350}
2351
2352// Bnc Text
2353////////////////////////////////////////////////////////////////////////////
2354void bncWindow::slotBncTextChanged(){
2355
2356 bool enable = true;
2357
2358 // Proxy
2359 //------
2360 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2361 enable = !_proxyHostLineEdit->text().isEmpty();
2362 enableWidget(enable, _proxyPortLineEdit);
2363 }
2364
2365 // RINEX Observations
2366 // ------------------
2367 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2368 enable = !_rnxPathLineEdit->text().isEmpty();
2369 enableWidget(enable, _rnxSamplSpinBox);
2370 enableWidget(enable, _rnxSkelLineEdit);
2371 enableWidget(enable, _rnxScrpLineEdit);
2372 enableWidget(enable, _rnxV3CheckBox);
2373 enableWidget(enable, _rnxIntrComboBox);
2374 }
2375
2376 // RINEX Ephemeris
2377 // ---------------
2378 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2379 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2380 enableWidget(enable, _ephIntrComboBox);
2381 enableWidget(enable, _ephV3CheckBox);
2382 }
2383
2384 // Broadcast Corrections
2385 // ---------------------
2386 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2387 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2388 enableWidget(enable, _corrIntrComboBox);
2389 }
2390
2391 // Feed Engine
2392 // -----------
2393 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2394 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2395 enableWidget(enable, _waitTimeSpinBox);
2396 enableWidget(enable, _binSamplSpinBox);
2397 }
2398
2399 // Serial Output
2400 // -------------
2401 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2402 sender() == _serialAutoNMEAComboBox) {
2403 enable = !_serialMountPointLineEdit->text().isEmpty();
2404 enableWidget(enable, _serialPortNameLineEdit);
2405 enableWidget(enable, _serialBaudRateComboBox);
2406 enableWidget(enable, _serialParityComboBox);
2407 enableWidget(enable, _serialDataBitsComboBox);
2408 enableWidget(enable, _serialStopBitsComboBox);
2409 enableWidget(enable, _serialFlowControlComboBox);
2410 enableWidget(enable, _serialAutoNMEAComboBox);
2411
2412 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() != "Auto";
2413 enableWidget(enable2, _serialFileNMEALineEdit);
2414 }
2415
2416 // Outages
2417 // -------
2418 if (sender() == 0 || sender() == _obsRateComboBox) {
2419 enable = !_obsRateComboBox->currentText().isEmpty();
2420 enableWidget(enable, _adviseFailSpinBox);
2421 enableWidget(enable, _adviseRecoSpinBox);
2422 enableWidget(enable, _adviseScriptLineEdit);
2423 }
2424
2425 // Miscellaneous
2426 // -------------
2427 if (sender() == 0 || sender() == _miscMountLineEdit) {
2428 enable = !_miscMountLineEdit->text().isEmpty();
2429 enableWidget(enable, _perfIntrComboBox);
2430 enableWidget(enable, _scanRTCMCheckBox);
2431 enableWidget(enable, _miscPortLineEdit);
2432 }
2433
2434 // Enable/disable Broadcast Ephemerides
2435 // ------------------------------------
2436 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2437 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2438 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2439 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2440 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2441 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2442 _uploadEphPortLineEdit->setEnabled(true);
2443 _uploadEphMountpointLineEdit->setEnabled(true);
2444 _uploadEphPasswordLineEdit->setEnabled(true);
2445 _uploadEphSampleSpinBox->setEnabled(true);
2446 }
2447 else {
2448 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2449 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2450 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2451 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2452 _uploadEphPortLineEdit->setEnabled(false);
2453 _uploadEphMountpointLineEdit->setEnabled(false);
2454 _uploadEphPasswordLineEdit->setEnabled(false);
2455 _uploadEphSampleSpinBox->setEnabled(false);
2456 }
2457 }
2458
2459 // Combine Corrections
2460 // -------------------
2461 if (sender() == 0 || sender() == _cmbTable) {
2462 int iRow = _cmbTable->rowCount();
2463 if (iRow > 0) {
2464 enableWidget(true, _cmbMethodComboBox);
2465 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2466 _cmbMaxresLineEdit->setEnabled(true);
2467 _cmbSamplSpinBox->setEnabled(true);
2468 }
2469 else {
2470 enableWidget(false, _cmbMethodComboBox);
2471 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2472 _cmbMaxresLineEdit->setEnabled(false);
2473 _cmbSamplSpinBox->setEnabled(false);
2474 }
2475 }
2476
2477 // Upload(clk)
2478 // -----------
2479 int iRow = _uploadTable->rowCount();
2480 if (iRow > 0) {
2481 enableWidget(true, _uploadIntrComboBox);
2482 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2483 enableWidget(true, _uploadSamplClkRnxSpinBox);
2484 enableWidget(true, _uploadSamplSp3SpinBox);
2485 }
2486 else {
2487 enableWidget(false, _uploadIntrComboBox);
2488 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2489 enableWidget(false, _uploadSamplClkRnxSpinBox);
2490 enableWidget(false, _uploadSamplSp3SpinBox);
2491 }
2492
2493 // PPP Client
2494 // ----------
2495 if (sender() == 0
2496 || sender() == _pppMountLineEdit
2497 || sender() == _pppCorrMountLineEdit
2498 || sender() == _pppRefCrdXLineEdit
2499 || sender() == _pppRefCrdYLineEdit
2500 || sender() == _pppRefCrdZLineEdit
2501 || sender() == _pppRefdNLineEdit
2502 || sender() == _pppRefdELineEdit
2503 || sender() == _pppRefdULineEdit
2504 || sender() == _pppSync
2505 || sender() == _pppSPPComboBox
2506 || sender() == _pppQuickStartLineEdit
2507 || sender() == _pppEstTropoCheckBox
2508 || sender() == _pppUsePhaseCheckBox
2509 || sender() == _pppAntexFileChooser
2510#ifdef QT_WEBKIT
2511 || sender() == _mapWin
2512#endif
2513 ) {
2514
2515
2516 enable = !_pppSPPComboBox->currentText().isEmpty();
2517 if (enable) {
2518 enable = (!_pppMountLineEdit->text().isEmpty() && !_pppCorrMountLineEdit->text().isEmpty()) ||
2519 (!_pppMountLineEdit->text().isEmpty() && _pppSPPComboBox->currentText() == "Realtime-SPP") ||
2520 (_pppSPPComboBox->currentText() == "Post-Processing");
2521 }
2522
2523 enableWidget(enable, _pppNMEALineEdit);
2524 enableWidget(enable, _pppNMEAPortLineEdit);
2525 enableWidget(enable, _pppRefCrdXLineEdit);
2526 enableWidget(enable, _pppRefCrdYLineEdit);
2527 enableWidget(enable, _pppRefCrdZLineEdit);
2528 enableWidget(enable, _pppRefdNLineEdit);
2529 enableWidget(enable, _pppRefdELineEdit);
2530 enableWidget(enable, _pppRefdULineEdit);
2531 enableWidget(enable, _pppUsePhaseCheckBox);
2532 enableWidget(enable, _pppPlotCoordinates);
2533 enableWidget(enable, _mapWinButton);
2534 enableWidget(enable, _mapWinDotSizeLineEdit);
2535 enableWidget(enable, _mapWinDotColorComboBox);
2536 enableWidget(enable, _gmRadioButton);
2537 enableWidget(enable, _osmRadioButton);
2538 enableWidget(enable, _pppEstTropoCheckBox);
2539// enableWidget(enable, _pppGLONASSCheckBox);
2540 enableWidget(enable, _pppGalileoCheckBox);
2541// enableWidget(enable, _pppAntexFileChooser);
2542 enableWidget(enable, _pppSigCLineEdit);
2543 enableWidget(enable, _pppSigCrd0);
2544 enableWidget(enable, _pppSigCrdP);
2545
2546 bool enable2 = enable && !_pppRefCrdXLineEdit->text().isEmpty() &&
2547 !_pppRefCrdYLineEdit->text().isEmpty() &&
2548 !_pppRefCrdZLineEdit->text().isEmpty();
2549
2550 enableWidget(enable2, _pppAverageLineEdit);
2551 enableWidget(enable2, _pppQuickStartLineEdit);
2552
2553 bool enable3 = enable2 && !_pppQuickStartLineEdit->text().isEmpty();
2554 enableWidget(enable3, _pppMaxSolGapLineEdit);
2555 enableWidget(enable3, _pppAudioResponseLineEdit);
2556
2557 bool enable4 = enable && !_pppAntexFileChooser->fileName().isEmpty();
2558 enableWidget(enable4, _pppAntennaLineEdit);
2559
2560 bool enable5 = enable && _pppEstTropoCheckBox->isChecked();
2561 enableWidget(enable5, _pppSigTrp0);
2562 enableWidget(enable5, _pppSigTrpP);
2563
2564 bool enable6 = enable && _pppUsePhaseCheckBox->isChecked();
2565 enableWidget(enable6, _pppSigPLineEdit);
2566
2567 bool enable7 = enable && _pppSPPComboBox->currentText() == "Realtime-PPP";
2568 enableWidget(enable7, _pppSync);
2569
2570 bool enable8 = _pppSPPComboBox->currentText() == "Realtime-PPP";
2571 enableWidget(enable8, _pppCorrMountLineEdit);
2572
2573 bool enable9 = _pppSPPComboBox->currentText() == "Post-Processing";
2574 enableWidget(enable9, _postObsFileChooser);
2575 enableWidget(enable9, _postNavFileChooser);
2576 enableWidget(enable9, _postCorrFileChooser);
2577 enableWidget(enable9, _postOutLineEdit);
2578 enableWidget(enable9, _mapSpeedSlider);
2579
2580 bool enable10 = !_pppSPPComboBox->currentText().isEmpty() && !enable9;
2581 enableWidget(enable10, _pppMountLineEdit);
2582 }
2583
2584 if (sender() == 0 || sender() == _reqcActionComboBox) {
2585 enable = !_reqcActionComboBox->currentText().isEmpty();
2586 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2587 enableWidget(enable && enable10, _reqcEditOptionButton);
2588 enableWidget(enable, _reqcObsFileChooser);
2589 enableWidget(enable, _reqcNavFileChooser);
2590 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2591 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2592 enableWidget(enable, _reqcOutLogLineEdit);
2593 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2594 enableWidget(enable && !enable10, _reqcSkyPlotSystems);
2595 }
2596
2597 enableStartStop();
2598}
2599
2600//
2601////////////////////////////////////////////////////////////////////////////
2602void bncWindow::slotAddCmbRow() {
2603 int iRow = _cmbTable->rowCount();
2604 _cmbTable->insertRow(iRow);
2605 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2606 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2607 }
2608}
2609
2610//
2611////////////////////////////////////////////////////////////////////////////
2612void bncWindow::slotDelCmbRow() {
2613 int nRows = _cmbTable->rowCount();
2614 bool flg[nRows];
2615 for (int iRow = 0; iRow < nRows; iRow++) {
2616 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2617 flg[iRow] = true;
2618 }
2619 else {
2620 flg[iRow] = false;
2621 }
2622 }
2623 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2624 if (flg[iRow]) {
2625 _cmbTable->removeRow(iRow);
2626 }
2627 }
2628 nRows = _cmbTable->rowCount();
2629 if (nRows < 1) {
2630 enableWidget(false, _cmbMethodComboBox);
2631 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2632 _cmbMaxresLineEdit->setEnabled(false);
2633 _cmbSamplSpinBox->setEnabled(false);
2634 }
2635}
2636
2637//
2638////////////////////////////////////////////////////////////////////////////
2639void bncWindow::populateCmbTable() {
2640
2641 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2642 _cmbTable->removeRow(iRow);
2643 }
2644
2645 bncSettings settings;
2646
2647 int iRow = -1;
2648 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2649 while (it.hasNext()) {
2650 QStringList hlp = it.next().split(" ");
2651 if (hlp.size() > 2) {
2652 ++iRow;
2653 _cmbTable->insertRow(iRow);
2654 }
2655 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2656 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2657 }
2658 }
2659}
2660
2661//
2662////////////////////////////////////////////////////////////////////////////
2663void bncWindow::slotAddUploadRow() {
2664 int iRow = _uploadTable->rowCount();
2665 _uploadTable->insertRow(iRow);
2666 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2667 if (iCol == 3) {
2668 QLineEdit* passwd = new QLineEdit();
2669 passwd->setFrame(false);
2670 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2671 _uploadTable->setCellWidget(iRow, iCol, passwd);
2672 }
2673 else if (iCol == 4) {
2674 QComboBox* system = new QComboBox();
2675 system->setEditable(false);
2676 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2677 system->setFrame(false);
2678 _uploadTable->setCellWidget(iRow, iCol, system);
2679 }
2680 else if (iCol == 5) {
2681 QCheckBox* com = new QCheckBox();
2682 _uploadTable->setCellWidget(iRow, iCol, com);
2683 }
2684 else if (iCol == 11) {
2685 bncTableItem* bncIt = new bncTableItem();
2686 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2687 _uploadTable->setItem(iRow, iCol, bncIt);
2688 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2689 }
2690 else {
2691 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2692 }
2693 }
2694}
2695
2696//
2697////////////////////////////////////////////////////////////////////////////
2698void bncWindow::slotDelUploadRow() {
2699 BNC_CORE->_uploadTableItems.clear();
2700 int nRows = _uploadTable->rowCount();
2701 bool flg[nRows];
2702 for (int iRow = 0; iRow < nRows; iRow++) {
2703 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2704 flg[iRow] = true;
2705 }
2706 else {
2707 flg[iRow] = false;
2708 }
2709 }
2710 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2711 if (flg[iRow]) {
2712 _uploadTable->removeRow(iRow);
2713 }
2714 }
2715 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2716 BNC_CORE->_uploadTableItems[iRow] =
2717 (bncTableItem*) _uploadTable->item(iRow, 11);
2718 }
2719 nRows = _uploadTable->rowCount();
2720 if (nRows < 1) {
2721 enableWidget(false, _uploadIntrComboBox);
2722 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2723 enableWidget(false, _uploadSamplSp3SpinBox);
2724 enableWidget(false, _uploadSamplClkRnxSpinBox);
2725 }
2726}
2727
2728//
2729////////////////////////////////////////////////////////////////////////////
2730void bncWindow::populateUploadTable() {
2731 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2732 _uploadTable->removeRow(iRow);
2733 }
2734
2735 bncSettings settings;
2736
2737 int iRow = -1;
2738 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2739 while (it.hasNext()) {
2740 QStringList hlp = it.next().split(",");
2741 if (hlp.size() > 6) {
2742 ++iRow;
2743 _uploadTable->insertRow(iRow);
2744 }
2745 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2746 if (iCol == 3) {
2747 QLineEdit* passwd = new QLineEdit();
2748 passwd->setFrame(false);
2749 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2750 passwd->setText(hlp[iCol]);
2751 _uploadTable->setCellWidget(iRow, iCol, passwd);
2752 }
2753 else if (iCol == 4) {
2754 QComboBox* system = new QComboBox();
2755 system->setEditable(false);
2756 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2757 system->setFrame(false);
2758 system->setCurrentIndex(system->findText(hlp[iCol]));
2759 _uploadTable->setCellWidget(iRow, iCol, system);
2760 }
2761 else if (iCol == 5) {
2762 QCheckBox* com = new QCheckBox();
2763 if (hlp[iCol].toInt() == Qt::Checked) {
2764 com->setCheckState(Qt::Checked);
2765 }
2766 _uploadTable->setCellWidget(iRow, iCol, com);
2767 }
2768 else if (iCol == 11) {
2769 bncTableItem* bncIt = new bncTableItem();
2770 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2771 _uploadTable->setItem(iRow, iCol, bncIt);
2772 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2773 }
2774 else {
2775 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2776 }
2777 }
2778 }
2779}
2780
2781//
2782////////////////////////////////////////////////////////////////////////////
2783void bncWindow::slotSetUploadTrafo() {
2784 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2785 dlg->exec();
2786 delete dlg;
2787}
2788
2789// Start Post-Processing PPP
2790////////////////////////////////////////////////////////////////////////////
2791void bncWindow::startPostProcessingPPP() {
2792#ifdef USE_POSTPROCESSING
2793 _runningPostProcessingPPP = true;
2794 _actStart->setText("0 Epochs");
2795 enableStartStop();
2796
2797 _postProcessing = new t_postProcessing(this, _mapSpeedSlider->maximum(), _mapSpeedSlider->value());
2798 connect(_postProcessing, SIGNAL(finished()), this, SLOT(slotFinishedPostProcessingPPP()));
2799 connect(_postProcessing, SIGNAL(progress(int)), this, SLOT(slotPostProgress(int)));
2800 connect(_mapSpeedSlider, SIGNAL(valueChanged(int)), _postProcessing, SLOT(slotSetSpeed(int)));
2801 bncSettings settings;
2802 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2803 _bncFigurePPP->reset();
2804 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2805 _bncFigurePPP, SLOT(slotNewPosition(bncTime, double, double, double)));
2806 }
2807#ifdef QT_WEBKIT
2808 if (_mapWin) {
2809 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2810 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2811 }
2812#endif
2813
2814 _postProcessing->start();
2815#else
2816 QMessageBox::information(this, "Information",
2817 "Post-Processing Not Permitted");
2818#endif
2819}
2820
2821// Post-Processing PPP Finished
2822////////////////////////////////////////////////////////////////////////////
2823void bncWindow::slotFinishedPostProcessingPPP() {
2824#ifdef QT_WEBKIT
2825 if (_mapWin) {
2826 _postProcessing->disconnect(_mapWin);
2827 }
2828#endif
2829 _runningPostProcessingPPP = false;
2830 delete _postProcessing;
2831 _postProcessing = 0;
2832 QMessageBox::information(this, "Information",
2833 "Post-Processing Thread Finished");
2834 _actStart->setText("Start");
2835 enableStartStop();
2836}
2837
2838// Progress Bar Change
2839////////////////////////////////////////////////////////////////////////////
2840void bncWindow::slotPostProgress(int nEpo) {
2841 if (_actStart) {
2842 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2843 }
2844}
2845
2846// Start Post-Processing Reqc
2847////////////////////////////////////////////////////////////////////////////
2848void bncWindow::startPostProcessingReqc() {
2849#ifdef USE_POSTPROCESSING
2850 _runningPostProcessingReqc = true;
2851 enableStartStop();
2852 if (_reqcActionComboBox->currentText() == "Analyze") {
2853 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2854 connect(reqcAnalyze, SIGNAL(finished()),
2855 this, SLOT(slotFinishedPostProcessingReqc()));
2856 reqcAnalyze->start();
2857 }
2858 else {
2859 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2860 connect(reqcEdit, SIGNAL(finished()),
2861 this, SLOT(slotFinishedPostProcessingReqc()));
2862 reqcEdit->start();
2863 }
2864#else
2865 QMessageBox::information(this, "Information",
2866 "Post-Processing Not Permitted");
2867#endif
2868}
2869
2870// Post-Processing Reqc Finished
2871////////////////////////////////////////////////////////////////////////////
2872void bncWindow::slotFinishedPostProcessingReqc() {
2873 _runningPostProcessingReqc = false;
2874 if (_reqcActionComboBox->currentText() != "Analyze") {
2875 QMessageBox::information(this, "Information",
2876 "RINEX Processing Thread Finished");
2877 }
2878 enableStartStop();
2879}
2880
2881// Edit teqc-like editing options
2882////////////////////////////////////////////////////////////////////////////
2883void bncWindow::slotReqcEditOption() {
2884 reqcDlg* dlg = new reqcDlg(this);
2885 dlg->move(this->pos().x()+50, this->pos().y()+50);
2886 dlg->exec();
2887 delete dlg;
2888}
2889
2890// Enable/Disable Start and Stop Buttons
2891////////////////////////////////////////////////////////////////////////////
2892void bncWindow::enableStartStop() {
2893
2894 if ( _pppSPPComboBox && _pppSPPComboBox->currentText() == "Post-Processing" ) {
2895 if (_runningPostProcessingPPP) {
2896 _actStart->setEnabled(false);
2897 }
2898 else {
2899 _actStart->setEnabled(true);
2900 }
2901 _actStop->setEnabled(false);
2902 }
2903 else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
2904 if (_runningPostProcessingReqc) {
2905 _actStart->setEnabled(false);
2906 }
2907 else {
2908 _actStart->setEnabled(true);
2909 }
2910 _actStop->setEnabled(false);
2911 }
2912 else {
2913 if (_runningRealTime) {
2914 _actStart->setEnabled(false);
2915 _actStop->setEnabled(true);
2916 }
2917 else {
2918 _actStop->setEnabled(false);
2919 if (_mountPointsTable->rowCount() == 0) {
2920 _actStart->setEnabled(false);
2921 }
2922 else {
2923 _actStart->setEnabled(true);
2924 }
2925 }
2926 }
2927}
2928
2929// Show Map
2930////////////////////////////////////////////////////////////////////////////
2931void bncWindow::slotMapMountPoints() {
2932 saveOptions();
2933 t_bncMap* bncMap = new t_bncMap(this);
2934 bncMap->setMinimumSize(800, 600);
2935 bncMap->setWindowTitle("Selected Mountpoints");
2936
2937 bncSettings settings;
2938 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2939 while (it.hasNext()) {
2940 QStringList hlp = it.next().split(" ");
2941 if (hlp.size() < 5) continue;
2942 QUrl url(hlp[0]);
2943 double latDeg = hlp[2].toDouble();
2944 double lonDeg = hlp[3].toDouble();
2945 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2946 }
2947
2948 bncMap->show();
2949}
2950
2951// Show Map
2952////////////////////////////////////////////////////////////////////////////
2953void bncWindow::slotMapPPP() {
2954#ifdef QT_WEBKIT
2955 saveOptions();
2956 enableWidget(false, _mapWinButton);
2957 enableWidget(false, _gmRadioButton);
2958 enableWidget(false, _osmRadioButton);
2959 enableWidget(false, _mapWinDotSizeLineEdit);
2960 enableWidget(false, _mapWinDotColorComboBox);
2961
2962 if (!_mapWin) {
2963 _mapWin = new bncMapWin(this);
2964 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2965 QListIterator<bncGetThread*> it(_threads);
2966 while (it.hasNext()) {
2967 bncGetThread* thread = it.next();
2968 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2969 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2970 }
2971 if (_postProcessing) {
2972 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2973 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2974 }
2975 }
2976 _mapWin->show();
2977#else
2978 QMessageBox::information(this, "Information",
2979 "Qt Library compiled without QtWebKit");
2980#endif
2981}
2982
2983// Show Map
2984////////////////////////////////////////////////////////////////////////////
2985void bncWindow::slotMapPPPClosed() {
2986#ifdef QT_WEBKIT
2987 slotBncTextChanged();
2988 if (_mapWin) {
2989 QListIterator<bncGetThread*> it(_threads);
2990 while (it.hasNext()) {
2991 bncGetThread* thread = it.next();
2992 thread->disconnect(_mapWin);
2993 }
2994 if (_postProcessing) {
2995 _postProcessing->disconnect(_mapWin);
2996 }
2997 _mapWin->deleteLater();
2998 _mapWin = 0;
2999 }
3000#endif
3001}
Note: See TracBrowser for help on using the repository browser.