source: ntrip/trunk/BNC/src/bncwindow.cpp@ 5291

Last change on this file since 5291 was 5291, checked in by weber, 9 years ago

Wording changed

File size: 155.1 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#ifdef QT_WEBKIT
67# include "map/bncmapwin.h"
68#endif
69#ifdef USE_POSTPROCESSING
70# include "rinex/bncpostprocess.h"
71# include "rinex/reqcedit.h"
72# include "rinex/reqcanalyze.h"
73#endif
74
75using namespace std;
76
77#ifdef GNSSCENTER_PLUGIN
78Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
79#endif
80
81// Constructor
82////////////////////////////////////////////////////////////////////////////
83bncWindow::bncWindow() {
84
85#ifdef GNSSCENTER_PLUGIN
86 BNC_CORE->setConfFileName("");
87#endif
88
89 _caster = 0;
90 _casterEph = 0;
91
92 _bncFigure = new bncFigure(this);
93 _bncFigureLate = new bncFigureLate(this);
94 _bncFigurePPP = new bncFigurePPP(this);
95 _runningRealTime = false;
96 _runningPostProcessingPPP = false;
97 _runningPostProcessingReqc = false;
98 _postProcessing = 0;
99
100 _pppSPPComboBox = 0; // necessary for enableStartStop()
101 _reqcActionComboBox = 0; // necessary for enableStartStop()
102
103 _mapWin = 0;
104
105 int ww = QFontMetrics(this->font()).width('w');
106
107 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
108
109 setMinimumSize(85*ww, 65*ww);
110
111 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
112
113 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
114 this, SLOT(slotWindowMessage(QByteArray,bool)));
115
116 // Create Actions
117 // --------------
118 _actHelp = new QAction(tr("&Help Contents"),this);
119 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
120
121 _actAbout = new QAction(tr("&About BNC"),this);
122 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
123
124 _actFlowchart = new QAction(tr("&Flow Chart"),this);
125 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
126
127 _actFontSel = new QAction(tr("Select &Font"),this);
128 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
129
130 _actSaveOpt = new QAction(tr("&Save && Reread Configuration"),this);
131 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
132
133 _actQuit = new QAction(tr("&Quit"),this);
134 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
135
136 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
137 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
138
139 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
140 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
141 _actDeleteMountPoints->setEnabled(false);
142
143 _actMapMountPoints = new QAction(tr("Streams &Map"),this);
144 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
145
146 _actStart = new QAction(tr("Sta&rt"),this);
147 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
148
149 _actStop = new QAction(tr("Sto&p"),this);
150 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
151
152 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
153 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
154
155 CreateMenu();
156 AddToolbar();
157
158 bncSettings settings;
159
160 // Network Options
161 // ---------------
162 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
163 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
164
165 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
166 this, SLOT(slotBncTextChanged()));
167
168 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
169 _ignoreSslErrorsCheckBox = new QCheckBox();
170 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
171 settings.value("ignoreSslErrors").toInt()));
172
173 // General Options
174 // ---------------
175 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
176 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
177 _rnxAppendCheckBox = new QCheckBox();
178 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
179 settings.value("rnxAppend").toInt()));
180 _onTheFlyComboBox = new QComboBox();
181 _onTheFlyComboBox->setEditable(false);
182 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
183 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
184 if (ii != -1) {
185 _onTheFlyComboBox->setCurrentIndex(ii);
186 }
187 _autoStartCheckBox = new QCheckBox();
188 _autoStartCheckBox->setCheckState(Qt::CheckState(
189 settings.value("autoStart").toInt()));
190
191 // RINEX Observations Options
192 // --------------------------
193 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
194 _rnxIntrComboBox = new QComboBox();
195 _rnxIntrComboBox->setEditable(false);
196 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
197 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
198 if (ii != -1) {
199 _rnxIntrComboBox->setCurrentIndex(ii);
200 }
201 _rnxSamplSpinBox = new QSpinBox();
202 _rnxSamplSpinBox->setMinimum(0);
203 _rnxSamplSpinBox->setMaximum(60);
204 _rnxSamplSpinBox->setSingleStep(5);
205 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
206 _rnxSamplSpinBox->setSuffix(" sec");
207 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
208 _rnxSkelLineEdit->setMaximumWidth(5*ww);
209 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
210 _rnxV3CheckBox = new QCheckBox();
211 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
212
213 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
214 this, SLOT(slotBncTextChanged()));
215
216 // RINEX Ephemeris Options
217 // -----------------------
218 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
219 _ephIntrComboBox = new QComboBox();
220 _ephIntrComboBox->setEditable(false);
221 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
222 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
223 if (jj != -1) {
224 _ephIntrComboBox->setCurrentIndex(jj);
225 }
226 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
227 _ephV3CheckBox = new QCheckBox();
228 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
229
230 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
231 this, SLOT(slotBncTextChanged()));
232
233 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
234 this, SLOT(slotBncTextChanged()));
235
236 // Broadcast Corrections Options
237 // -----------------------------
238 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
239 _corrIntrComboBox = new QComboBox();
240 _corrIntrComboBox->setEditable(false);
241 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
242 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
243 if (mm != -1) {
244 _corrIntrComboBox->setCurrentIndex(mm);
245 }
246 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
247 _corrTimeSpinBox = new QSpinBox();
248 _corrTimeSpinBox->setMinimum(0);
249 _corrTimeSpinBox->setMaximum(60);
250 _corrTimeSpinBox->setSingleStep(1);
251 _corrTimeSpinBox->setSuffix(" sec");
252 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
253
254 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
255 this, SLOT(slotBncTextChanged()));
256
257 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
258 this, SLOT(slotBncTextChanged()));
259
260 // Feed Engine Options
261 // -------------------
262 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
263 _waitTimeSpinBox = new QSpinBox();
264 _waitTimeSpinBox->setMinimum(1);
265 _waitTimeSpinBox->setMaximum(30);
266 _waitTimeSpinBox->setSingleStep(1);
267 _waitTimeSpinBox->setSuffix(" sec");
268 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
269 _binSamplSpinBox = new QSpinBox();
270 _binSamplSpinBox->setMinimum(0);
271 _binSamplSpinBox->setMaximum(60);
272 _binSamplSpinBox->setSingleStep(5);
273 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
274 _binSamplSpinBox->setSuffix(" sec");
275 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
276 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
277
278 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
279 this, SLOT(slotBncTextChanged()));
280
281 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
282 this, SLOT(slotBncTextChanged()));
283
284 // Serial Output Options
285 // ---------------------
286 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
287 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
288 _serialBaudRateComboBox = new QComboBox();
289 _serialBaudRateComboBox->addItems(QString("110,300,600,"
290 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
291 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
292 if (kk != -1) {
293 _serialBaudRateComboBox->setCurrentIndex(kk);
294 }
295 _serialFlowControlComboBox = new QComboBox();
296 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
297 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
298 if (kk != -1) {
299 _serialFlowControlComboBox->setCurrentIndex(kk);
300 }
301 _serialDataBitsComboBox = new QComboBox();
302 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
303 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
304 if (kk != -1) {
305 _serialDataBitsComboBox->setCurrentIndex(kk);
306 }
307 _serialParityComboBox = new QComboBox();
308 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
309 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
310 if (kk != -1) {
311 _serialParityComboBox->setCurrentIndex(kk);
312 }
313 _serialStopBitsComboBox = new QComboBox();
314 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
315 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
316 if (kk != -1) {
317 _serialStopBitsComboBox->setCurrentIndex(kk);
318 }
319 _serialAutoNMEAComboBox = new QComboBox();
320 _serialAutoNMEAComboBox->addItems(QString("Auto,Manual").split(","));
321 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
322 if (kk != -1) {
323 _serialAutoNMEAComboBox->setCurrentIndex(kk);
324 }
325 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
326 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
327
328 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
329 this, SLOT(slotBncTextChanged()));
330
331 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
332 this, SLOT(slotBncTextChanged()));
333
334 // Outages Options
335 // ---------------
336 _obsRateComboBox = new QComboBox();
337 _obsRateComboBox->setEditable(false);
338 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
339 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
340 if (kk != -1) {
341 _obsRateComboBox->setCurrentIndex(kk);
342 }
343 _adviseFailSpinBox = new QSpinBox();
344 _adviseFailSpinBox->setMinimum(0);
345 _adviseFailSpinBox->setMaximum(60);
346 _adviseFailSpinBox->setSingleStep(1);
347 _adviseFailSpinBox->setSuffix(" min");
348 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
349 _adviseRecoSpinBox = new QSpinBox();
350 _adviseRecoSpinBox->setMinimum(0);
351 _adviseRecoSpinBox->setMaximum(60);
352 _adviseRecoSpinBox->setSingleStep(1);
353 _adviseRecoSpinBox->setSuffix(" min");
354 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
355 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
356
357 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
358 this, SLOT(slotBncTextChanged()));
359
360 // Miscellaneous Options
361 // ---------------------
362 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
363 _perfIntrComboBox = new QComboBox();
364 _perfIntrComboBox->setEditable(false);
365 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
366 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
367 if (ll != -1) {
368 _perfIntrComboBox->setCurrentIndex(ll);
369 }
370 _scanRTCMCheckBox = new QCheckBox();
371 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
372 settings.value("scanRTCM").toInt()));
373
374 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
375 this, SLOT(slotBncTextChanged()));
376
377 // PPP Options
378 // -----------
379 _pppMountLineEdit = new QLineEdit(settings.value("pppMount").toString());
380 _pppMountLineEdit->setMaximumWidth(8*ww);
381 _pppCorrMountLineEdit = new QLineEdit(settings.value("pppCorrMount").toString());
382 _pppMountLineEdit->setMinimumWidth(8*ww);
383 _pppCorrMountLineEdit->setMinimumWidth(8*ww);
384 _pppCorrMountLineEdit->setMaximumWidth(8*ww);
385 _pppNMEALineEdit = new QLineEdit(settings.value("nmeaFile").toString());
386 _pppNMEALineEdit->setMinimumWidth(15*ww);
387 _pppNMEAPortLineEdit = new QLineEdit(settings.value("nmeaPort").toString());
388 _pppNMEAPortLineEdit->setMaximumWidth(8*ww);
389 _pppNMEAPortLineEdit->setMinimumWidth(8*ww);
390 _pppSigCLineEdit = new QLineEdit(settings.value("pppSigmaCode").toString());
391 _pppSigPLineEdit = new QLineEdit(settings.value("pppSigmaPhase").toString());
392 _pppSigCrd0 = new QLineEdit(settings.value("pppSigCrd0").toString());
393 _pppSigCrdP = new QLineEdit(settings.value("pppSigCrdP").toString());
394 _pppSigTrp0 = new QLineEdit(settings.value("pppSigTrp0").toString());
395 _pppSigTrpP = new QLineEdit(settings.value("pppSigTrpP").toString());
396 _pppAverageLineEdit = new QLineEdit(settings.value("pppAverage").toString());
397 _pppQuickStartLineEdit = new QLineEdit(settings.value("pppQuickStart").toString());
398 _pppMaxSolGapLineEdit = new QLineEdit(settings.value("pppMaxSolGap").toString());
399 _pppAudioResponseLineEdit = new QLineEdit(settings.value("pppAudioResponse").toString());
400 _pppRefCrdXLineEdit = new QLineEdit(settings.value("pppRefCrdX").toString());
401 _pppRefCrdYLineEdit = new QLineEdit(settings.value("pppRefCrdY").toString());
402 _pppRefCrdZLineEdit = new QLineEdit(settings.value("pppRefCrdZ").toString());
403 _pppRefdNLineEdit = new QLineEdit(settings.value("pppRefdN").toString());
404 _pppRefdELineEdit = new QLineEdit(settings.value("pppRefdE").toString());
405 _pppRefdULineEdit = new QLineEdit(settings.value("pppRefdU").toString());
406 _pppSync = new QLineEdit(settings.value("pppSync").toString());
407 _pppAntexFileChooser = new qtFileChooser;
408 _pppAntexFileChooser->setMinimumWidth(12*ww);
409 _pppAntennaLineEdit = new QLineEdit(settings.value("pppAntenna").toString());
410 _pppAntexFileChooser->setFileName(settings.value("pppAntex").toString());
411
412 _pppSPPComboBox = new QComboBox();
413 _pppSPPComboBox->setEditable(false);
414 _pppSPPComboBox->addItems(QString(",Realtime-PPP,Realtime-SPP,Post-Processing").split(","));
415 int ik = _pppSPPComboBox->findText(settings.value("pppSPP").toString());
416 if (ik != -1) {
417 _pppSPPComboBox->setCurrentIndex(ik);
418 }
419 _pppUsePhaseCheckBox = new QCheckBox();
420 _pppUsePhaseCheckBox->setCheckState(Qt::CheckState(
421 settings.value("pppUsePhase").toInt()));
422 _pppEstTropoCheckBox = new QCheckBox();
423 _pppEstTropoCheckBox->setCheckState(Qt::CheckState(
424 settings.value("pppEstTropo").toInt()));
425 _pppGLONASSCheckBox = new QCheckBox();
426 _pppGLONASSCheckBox->setCheckState(Qt::CheckState(
427 settings.value("pppGLONASS").toInt()));
428 _pppGalileoCheckBox = new QCheckBox();
429 _pppGalileoCheckBox->setCheckState(Qt::CheckState(
430 settings.value("pppGalileo").toInt()));
431
432 connect(_pppMountLineEdit, SIGNAL(textChanged(const QString &)),
433 this, SLOT(slotBncTextChanged()));
434
435 connect(_pppCorrMountLineEdit, SIGNAL(textChanged(const QString &)),
436 this, SLOT(slotBncTextChanged()));
437
438 connect(_pppUsePhaseCheckBox, SIGNAL(stateChanged(int)),
439 this, SLOT(slotBncTextChanged()));
440
441 connect(_pppRefCrdXLineEdit, SIGNAL(textChanged(const QString &)),
442 this, SLOT(slotBncTextChanged()));
443 connect(_pppRefCrdYLineEdit, SIGNAL(textChanged(const QString &)),
444 this, SLOT(slotBncTextChanged()));
445 connect(_pppRefCrdZLineEdit, SIGNAL(textChanged(const QString &)),
446 this, SLOT(slotBncTextChanged()));
447 connect(_pppRefdNLineEdit, SIGNAL(textChanged(const QString &)),
448 this, SLOT(slotBncTextChanged()));
449 connect(_pppRefdELineEdit, SIGNAL(textChanged(const QString &)),
450 this, SLOT(slotBncTextChanged()));
451 connect(_pppRefdULineEdit, SIGNAL(textChanged(const QString &)),
452 this, SLOT(slotBncTextChanged()));
453
454 connect(_pppEstTropoCheckBox, SIGNAL(stateChanged(int)),
455 this, SLOT(slotBncTextChanged()));
456
457 connect(_pppSync, SIGNAL(textChanged(const QString &)),
458 this, SLOT(slotBncTextChanged()));
459
460 connect(_pppSPPComboBox, SIGNAL(currentIndexChanged(const QString &)),
461 this, SLOT(slotBncTextChanged()));
462
463 connect(_pppAntexFileChooser, SIGNAL(fileNameChanged(const QString &)),
464 this, SLOT(slotBncTextChanged()));
465
466 connect(_pppQuickStartLineEdit, SIGNAL(textChanged(const QString &)),
467 this, SLOT(slotBncTextChanged()));
468
469 // Streams
470 // -------
471 _mountPointsTable = new QTableWidget(0,8);
472
473 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
474 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
475 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
476 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
477 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
478 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
479 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
480 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
481 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
482_mountPointsTable->setHorizontalHeaderLabels(labels);
483 _mountPointsTable->setGridStyle(Qt::NoPen);
484 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
485 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
486 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
487 _mountPointsTable->hideColumn(0);
488 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
489 SLOT(slotSelectionChanged()));
490 populateMountPointsTable();
491
492 _log = new QTextBrowser();
493 _log->setReadOnly(true);
494
495 // Combine Corrections
496 // -------------------
497 _cmbTable = new QTableWidget(0,3);
498 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
499 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
500 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
501 _cmbTable->setMaximumWidth(30*ww);
502 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
503 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
504 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
505 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
506 _cmbTable->horizontalHeader()->setStretchLastSection(true);
507 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
508
509 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
510
511 _cmbSamplSpinBox = new QSpinBox;
512 _cmbSamplSpinBox->setMinimum(10);
513 _cmbSamplSpinBox->setMaximum(60);
514 _cmbSamplSpinBox->setSingleStep(10);
515 _cmbSamplSpinBox->setMaximumWidth(9*ww);
516 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
517 _cmbSamplSpinBox->setSuffix(" sec");
518
519 QPushButton* addCmbRowButton = new QPushButton("Add Row");
520 QPushButton* delCmbRowButton = new QPushButton("Delete");
521
522 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
523 SLOT(slotBncTextChanged()));
524
525 _cmbMethodComboBox = new QComboBox();
526 _cmbMethodComboBox->setEditable(false);
527 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
528 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
529 if (im != -1) {
530 _cmbMethodComboBox->setCurrentIndex(im);
531 }
532
533 int iRow = _cmbTable->rowCount();
534 if (iRow > 0) {
535 enableWidget(true, _cmbMethodComboBox);
536 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
537 _cmbMaxresLineEdit->setEnabled(true);
538 _cmbSamplSpinBox->setEnabled(true);
539 }
540 else {
541 enableWidget(false, _cmbMethodComboBox);
542 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
543 _cmbMaxresLineEdit->setEnabled(false);
544 _cmbSamplSpinBox->setEnabled(false);
545 }
546
547 // Upload Results
548 // -------------
549 _uploadTable = new QTableWidget(0,12);
550 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
551 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
552 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
553 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
554 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
555 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
556 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
557 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
558 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
559 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
560 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
561 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
562 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
563 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
564 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
565 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
566 _uploadTable->horizontalHeader()->setStretchLastSection(true);
567 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
568
569 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
570 SLOT(slotBncTextChanged()));
571
572 QPushButton* addUploadRowButton = new QPushButton("Add Row");
573 QPushButton* delUploadRowButton = new QPushButton("Del Row");
574 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
575 _uploadIntrComboBox = new QComboBox;
576 _uploadIntrComboBox->setEditable(false);
577 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
578 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
579 if (ii != -1) {
580 _uploadIntrComboBox->setCurrentIndex(ii);
581 }
582
583 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
584 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
585 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
586 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
587 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
588 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
589 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
590
591 _uploadSamplSp3SpinBox = new QSpinBox;
592 _uploadSamplSp3SpinBox->setMinimum(0);
593 _uploadSamplSp3SpinBox->setMaximum(15);
594 _uploadSamplSp3SpinBox->setSingleStep(1);
595 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
596 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
597 _uploadSamplSp3SpinBox->setSuffix(" min");
598
599 _uploadSamplClkRnxSpinBox = new QSpinBox;
600 _uploadSamplClkRnxSpinBox->setMinimum(0);
601 _uploadSamplClkRnxSpinBox->setMaximum(60);
602 _uploadSamplClkRnxSpinBox->setSingleStep(5);
603 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
604 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
605 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
606
607 int iRowT = _uploadTable->rowCount();
608 if (iRowT > 0) {
609 enableWidget(true, _uploadIntrComboBox);
610 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
611 enableWidget(true, _uploadSamplSp3SpinBox);
612 enableWidget(true, _uploadSamplClkRnxSpinBox);
613 }
614 else {
615 enableWidget(false, _uploadIntrComboBox);
616 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
617 enableWidget(false, _uploadSamplSp3SpinBox);
618 enableWidget(false, _uploadSamplClkRnxSpinBox);
619 }
620
621 // Upload RTCM3 Ephemeris
622 // ----------------------
623 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
624 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
625 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
626 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
627 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
628 _uploadEphSampleSpinBox = new QSpinBox;
629 _uploadEphSampleSpinBox->setMinimum(5);
630 _uploadEphSampleSpinBox->setMaximum(60);
631 _uploadEphSampleSpinBox->setSingleStep(5);
632 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
633 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
634 _uploadEphSampleSpinBox->setSuffix(" sec");
635 _uploadEphBytesCounter = new bncBytesCounter;
636
637 // Canvas with Editable Fields
638 // ---------------------------
639 _canvas = new QWidget;
640 setCentralWidget(_canvas);
641
642 _aogroup = new QTabWidget();
643 QWidget* pgroup = new QWidget();
644 QWidget* ggroup = new QWidget();
645 QWidget* sgroup = new QWidget();
646 QWidget* egroup = new QWidget();
647 QWidget* agroup = new QWidget();
648 QWidget* cgroup = new QWidget();
649 QWidget* ogroup = new QWidget();
650 QWidget* rgroup = new QWidget();
651 QWidget* sergroup = new QWidget();
652 QWidget* pppgroup = new QWidget();
653 QWidget* ppp2group = new QWidget();
654 QWidget* ppp3group = new QWidget();
655 QWidget* reqcgroup = new QWidget();
656 QWidget* cmbgroup = new QWidget();
657 QWidget* uploadgroup = new QWidget();
658 QWidget* uploadEphgroup = new QWidget();
659 _aogroup->addTab(pgroup,tr("Network"));
660 _aogroup->addTab(ggroup,tr("General"));
661 _aogroup->addTab(ogroup,tr("RINEX Observations"));
662 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
663 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
664 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
665 _aogroup->addTab(sgroup,tr("Feed Engine"));
666 _aogroup->addTab(sergroup,tr("Serial Output"));
667 _aogroup->addTab(agroup,tr("Outages"));
668 _aogroup->addTab(rgroup,tr("Miscellaneous"));
669 _aogroup->addTab(pppgroup,tr("PPP (1)"));
670 _aogroup->addTab(ppp2group,tr("PPP (2)"));
671 _aogroup->addTab(ppp3group,tr("PPP (3)"));
672#ifdef USE_COMBINATION
673 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
674#endif
675 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
676 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
677
678 // Log Tab
679 // -------
680 _loggroup = new QTabWidget();
681 _loggroup->addTab(_log,tr("Log"));
682 _loggroup->addTab(_bncFigure,tr("Throughput"));
683 _loggroup->addTab(_bncFigureLate,tr("Latency"));
684 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
685
686 // Netowork (Proxy and SSL) Tab
687 // ----------------------------
688 QGridLayout* pLayout = new QGridLayout;
689 pLayout->setColumnMinimumWidth(0,13*ww);
690 _proxyPortLineEdit->setMaximumWidth(9*ww);
691
692 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none."),0, 0, 1, 50);
693 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
694 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
695 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
696 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
697 pLayout->addWidget(new QLabel("Path to SSL Certificates"), 3, 0);
698 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
699 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
700 pLayout->addWidget(new QLabel("Ignore SSL Authorization Errors"), 4, 0);
701 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
702 pLayout->addWidget(new QLabel(" "), 4, 0);
703 pLayout->addWidget(new QLabel(" "), 5, 0);
704 pLayout->addWidget(new QLabel(" "), 6, 0);
705 pgroup->setLayout(pLayout);
706
707 // General Tab
708 // -----------
709 QGridLayout* gLayout = new QGridLayout;
710 gLayout->setColumnMinimumWidth(0,14*ww);
711 _onTheFlyComboBox->setMaximumWidth(9*ww);
712
713 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),0, 0, 1, 50);
714 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
715 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,30);
716 gLayout->addWidget(new QLabel("Append files"), 2, 0);
717 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
718 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
719 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
720 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
721 gLayout->addWidget(_autoStartCheckBox, 4, 1);
722 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
723 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,30);
724 gLayout->addWidget(new QLabel(" "), 6, 0);
725 ggroup->setLayout(gLayout);
726
727 // RINEX Observations
728 // ------------------
729 QGridLayout* oLayout = new QGridLayout;
730 oLayout->setColumnMinimumWidth(0,14*ww);
731 _rnxIntrComboBox->setMaximumWidth(9*ww);
732 _rnxSamplSpinBox->setMaximumWidth(9*ww);
733
734 oLayout->addWidget(new QLabel("Saving RINEX observation files."),0, 0, 1,50);
735 oLayout->addWidget(new QLabel("Directory"), 1, 0);
736 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1,24);
737 oLayout->addWidget(new QLabel("Interval"), 2, 0);
738 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
739 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
740 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
741 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
742 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, 1, 1, Qt::AlignLeft);
743 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
744 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1,24);
745 oLayout->addWidget(new QLabel("Version 3"), 5, 0);
746 oLayout->addWidget(_rnxV3CheckBox, 5, 1);
747 oLayout->addWidget(new QLabel(" "), 6, 0);
748 ogroup->setLayout(oLayout);
749
750 // RINEX Ephemeris
751 // ---------------
752 QGridLayout* eLayout = new QGridLayout;
753 eLayout->setColumnMinimumWidth(0,14*ww);
754 _ephIntrComboBox->setMaximumWidth(9*ww);
755 _outEphPortLineEdit->setMaximumWidth(9*ww);
756
757 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),0,0,1,50);
758 eLayout->addWidget(new QLabel("Directory"), 1, 0);
759 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
760 eLayout->addWidget(new QLabel("Interval"), 2, 0);
761 eLayout->addWidget(_ephIntrComboBox, 2, 1);
762 eLayout->addWidget(new QLabel("Port"), 3, 0);
763 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
764 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
765 eLayout->addWidget(_ephV3CheckBox, 4, 1);
766 eLayout->addWidget(new QLabel(" "), 5, 0);
767 eLayout->addWidget(new QLabel(" "), 6, 0);
768 egroup->setLayout(eLayout);
769
770
771 // Broadcast Corrections
772 // ---------------------
773 QGridLayout* cLayout = new QGridLayout;
774 cLayout->setColumnMinimumWidth(0,14*ww);
775 _corrIntrComboBox->setMaximumWidth(9*ww);
776 _corrPortLineEdit->setMaximumWidth(9*ww);
777 _corrTimeSpinBox->setMaximumWidth(9*ww);
778
779 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),0,0,1,50);
780 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
781 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,20);
782 cLayout->addWidget(new QLabel("Interval"), 2, 0);
783 cLayout->addWidget(_corrIntrComboBox, 2, 1);
784 cLayout->addWidget(new QLabel("Port"), 3, 0);
785 cLayout->addWidget(_corrPortLineEdit, 3, 1);
786 cLayout->addWidget(new QLabel(" Wait for full corr epoch"), 3, 2, Qt::AlignRight);
787 cLayout->addWidget(_corrTimeSpinBox, 3, 3, Qt::AlignLeft);
788 cLayout->addWidget(new QLabel(" "), 4, 0);
789 cLayout->addWidget(new QLabel(" "), 5, 0);
790 cLayout->addWidget(new QLabel(" "), 6, 0);
791 cgroup->setLayout(cLayout);
792
793 // Feed Engine
794 // -----------
795 QGridLayout* sLayout = new QGridLayout;
796 sLayout->setColumnMinimumWidth(0,14*ww);
797 _outPortLineEdit->setMaximumWidth(9*ww);
798 _waitTimeSpinBox->setMaximumWidth(9*ww);
799 _binSamplSpinBox->setMaximumWidth(9*ww);
800 _outUPortLineEdit->setMaximumWidth(9*ww);
801
802 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine."),0,0,1,50);
803 sLayout->addWidget(new QLabel("Port"), 1, 0);
804 sLayout->addWidget(_outPortLineEdit, 1, 1);
805 sLayout->addWidget(new QLabel("Wait for full obs epoch"), 1, 2, Qt::AlignRight);
806 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
807 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
808 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
809 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
810 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 20);
811 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
812 sLayout->addWidget(_outUPortLineEdit, 4, 1);
813 sLayout->addWidget(new QLabel(" "), 5, 0);
814 sLayout->addWidget(new QLabel(" "), 6, 0);
815 sgroup->setLayout(sLayout);
816
817 // Serial Output
818 // -------------
819 QGridLayout* serLayout = new QGridLayout;
820 serLayout->setColumnMinimumWidth(0,14*ww);
821 _serialBaudRateComboBox->setMaximumWidth(9*ww);
822 _serialFlowControlComboBox->setMaximumWidth(11*ww);
823 _serialDataBitsComboBox->setMaximumWidth(5*ww);
824 _serialParityComboBox->setMaximumWidth(9*ww);
825 _serialStopBitsComboBox->setMaximumWidth(5*ww);
826 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
827 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
828
829 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver."),0,0,1,30);
830 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
831 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
832 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
833 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
834 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
835 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
836 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
837 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
838 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
839 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
840 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
841 serLayout->addWidget(_serialParityComboBox, 4, 3);
842 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
843 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
844 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
845 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
846 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
847 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,15);
848 serLayout->addWidget(new QLabel("Height"), 5,20, Qt::AlignRight);
849 serLayout->addWidget(_serialHeightNMEALineEdit, 5,21, 1,11);
850 serLayout->addWidget(new QLabel(" "), 6, 0);
851
852 sergroup->setLayout(serLayout);
853
854 // Outages
855 // -------
856 QGridLayout* aLayout = new QGridLayout;
857 aLayout->setColumnMinimumWidth(0,14*ww);
858 _obsRateComboBox->setMaximumWidth(9*ww);
859 _adviseFailSpinBox->setMaximumWidth(9*ww);
860 _adviseRecoSpinBox->setMaximumWidth(9*ww);
861
862 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes."),0,0,1,50,Qt::AlignLeft);
863 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
864 aLayout->addWidget(_obsRateComboBox, 1, 1);
865 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
866 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
867 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
868 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
869 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
870 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,30);
871 aLayout->addWidget(new QLabel(" "), 5, 0);
872 aLayout->addWidget(new QLabel(" "), 6, 0);
873 agroup->setLayout(aLayout);
874
875 // Miscellaneous
876 // -------------
877 QGridLayout* rLayout = new QGridLayout;
878 rLayout->setColumnMinimumWidth(0,14*ww);
879 _perfIntrComboBox->setMaximumWidth(9*ww);
880
881 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for numbers of message types and antenna information."),0, 0,1,30);
882 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
883 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1,7);
884 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
885 rLayout->addWidget(_perfIntrComboBox, 2, 1);
886 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
887 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
888 rLayout->addWidget(new QLabel(" "), 4, 0);
889 rLayout->addWidget(new QLabel(" "), 5, 0);
890 rLayout->addWidget(new QLabel(" "), 6, 0);
891 rgroup->setLayout(rLayout);
892
893 // PPP Client
894 // ----------
895 QGridLayout* pppLayout = new QGridLayout;
896 pppLayout->setColumnMinimumWidth(0,14*ww);
897 _pppSigCLineEdit->setMaximumWidth(6*ww);
898 _pppSigPLineEdit->setMaximumWidth(6*ww);
899 _pppSigCrd0->setMaximumWidth(6*ww);
900 _pppSigCrdP->setMaximumWidth(6*ww);
901 _pppSigTrp0->setMaximumWidth(6*ww);
902 _pppSigTrpP->setMaximumWidth(6*ww);
903 _pppAverageLineEdit->setMaximumWidth(6*ww);
904 _pppQuickStartLineEdit->setMaximumWidth(6*ww);
905 _pppMaxSolGapLineEdit->setMaximumWidth(6*ww);
906 _pppAudioResponseLineEdit->setMaximumWidth(6*ww);
907 _pppRefCrdXLineEdit->setMaximumWidth(10*ww);
908 _pppRefCrdYLineEdit->setMaximumWidth(10*ww);
909 _pppRefCrdZLineEdit->setMaximumWidth(10*ww);
910 _pppRefdNLineEdit->setMaximumWidth(6*ww);
911 _pppRefdELineEdit->setMaximumWidth(6*ww);
912 _pppRefdULineEdit->setMaximumWidth(6*ww);
913 _pppSync->setMaximumWidth(6*ww);
914 _pppSPPComboBox->setMinimumWidth(15*ww);
915
916 _postObsFileChooser = new qtFileChooser;
917 _postObsFileChooser->setFileName(settings.value("postObsFile").toString());
918 _postObsFileChooser->setMinimumWidth(15*ww);
919 _postNavFileChooser = new qtFileChooser;
920 _postNavFileChooser->setFileName(settings.value("postNavFile").toString());
921 _postNavFileChooser->setMinimumWidth(15*ww);
922 _postCorrFileChooser = new qtFileChooser;
923 _postCorrFileChooser->setFileName(settings.value("postCorrFile").toString());
924 _postCorrFileChooser->setMinimumWidth(15*ww);
925 _postOutLineEdit = new QLineEdit(settings.value("postOutFile").toString());
926 _postOutLineEdit->setMinimumWidth(15*ww);
927
928 int ir = 0;
929 pppLayout->addWidget(new QLabel("Precise Point Positioning, Panel 1."), ir, 0, 1, 2, Qt::AlignLeft);
930 ++ir;
931 pppLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
932 pppLayout->addWidget(_pppSPPComboBox, ir, 1, Qt::AlignRight);
933 pppLayout->addWidget(_pppMountLineEdit, ir, 3, Qt::AlignRight);
934 pppLayout->addWidget(new QLabel("Obs."), ir, 4, Qt::AlignLeft);
935 pppLayout->addWidget(_pppCorrMountLineEdit, ir, 5, Qt::AlignRight);
936 pppLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
937 ++ir;
938 pppLayout->addWidget(new QLabel("Marker coordinates"), ir, 0, Qt::AlignLeft);
939 pppLayout->addWidget(_pppRefCrdXLineEdit, ir, 1, Qt::AlignRight);
940 pppLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
941 pppLayout->addWidget(_pppRefCrdYLineEdit, ir, 3, Qt::AlignRight);
942 pppLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
943 pppLayout->addWidget(_pppRefCrdZLineEdit, ir, 5, Qt::AlignRight);
944 pppLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
945 ++ir;
946 pppLayout->addWidget(new QLabel("Antenna excentricity"), ir, 0, Qt::AlignLeft);
947 pppLayout->addWidget(_pppRefdNLineEdit, ir, 1, Qt::AlignRight);
948 pppLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
949 pppLayout->addWidget(_pppRefdELineEdit, ir, 3, Qt::AlignRight);
950 pppLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
951 pppLayout->addWidget(_pppRefdULineEdit, ir, 5, Qt::AlignRight);
952 pppLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
953 ++ir;
954 pppLayout->addWidget(new QLabel("NMEA & plot output"),ir, 0, Qt::AlignLeft);
955 pppLayout->addWidget(_pppNMEALineEdit, ir, 1, Qt::AlignRight);
956 pppLayout->addWidget(new QLabel("NMEA File"), ir, 2, Qt::AlignLeft);
957 pppLayout->addWidget(_pppNMEAPortLineEdit, ir, 3, Qt::AlignRight);
958 pppLayout->addWidget(new QLabel("NMEA Port"), ir, 4, Qt::AlignLeft);
959 ++ir;
960 pppLayout->addWidget(new QLabel("Post-processing"), ir, 0, Qt::AlignLeft);
961 pppLayout->addWidget(_postObsFileChooser, ir, 1, Qt::AlignRight);
962 pppLayout->addWidget(new QLabel("Obs "), ir, 2, Qt::AlignLeft);
963 pppLayout->addWidget(_postNavFileChooser, ir, 3, Qt::AlignRight);
964 pppLayout->addWidget(new QLabel("Nav "), ir, 4, Qt::AlignLeft);
965 ++ir;
966 pppLayout->addWidget(_postCorrFileChooser, ir, 1, Qt::AlignRight);
967 pppLayout->addWidget(new QLabel("Corr"), ir, 2, Qt::AlignLeft);
968 pppLayout->addWidget(_postOutLineEdit, ir, 3, Qt::AlignRight);
969 pppLayout->addWidget(new QLabel("Log (full path)"), ir, 4, Qt::AlignLeft);
970
971 pppgroup->setLayout(pppLayout);
972
973 // PPP Client (second panel)
974 // -------------------------
975 QGridLayout* ppp2Layout = new QGridLayout;
976 ppp2Layout->setColumnMinimumWidth(0,14*ww);
977 ir = 0;
978 ppp2Layout->addWidget(new QLabel("Precise Point Positioning, Panel 2."), ir, 0, 1, 10);
979 ++ir;
980 ppp2Layout->addWidget(new QLabel("Antennas"), ir, 0);
981 ppp2Layout->addWidget(_pppAntexFileChooser, ir, 1,1,3);
982 ppp2Layout->addWidget(new QLabel("ANTEX File"), ir, 4);
983 ppp2Layout->addWidget(_pppAntennaLineEdit, ir, 5,1,3);
984 ppp2Layout->addWidget(new QLabel("Antenna Name"), ir, 8);
985 ++ir;
986 ppp2Layout->addWidget(new QLabel("Basics"), ir, 0, 1, 5);
987 ppp2Layout->addWidget(_pppUsePhaseCheckBox, ir, 1, Qt::AlignRight);
988 ppp2Layout->addWidget(new QLabel("Use phase obs"), ir, 2);
989 ppp2Layout->addWidget(_pppEstTropoCheckBox, ir, 3, Qt::AlignRight);
990 ppp2Layout->addWidget(new QLabel("Estimate tropo"), ir, 4);
991 ppp2Layout->addWidget(_pppGLONASSCheckBox, ir, 5, Qt::AlignRight);
992 ppp2Layout->addWidget(new QLabel("Use GLONASS"), ir, 6);
993 ppp2Layout->addWidget(_pppGalileoCheckBox, ir, 7, Qt::AlignRight);
994 ppp2Layout->addWidget(new QLabel("Use Galileo "), ir, 8);
995 ++ir;
996 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
997 ppp2Layout->addWidget(_pppSync, ir, 1);
998 ppp2Layout->addWidget(new QLabel("Sync Corr (sec) "), ir, 2);
999 ppp2Layout->addWidget(_pppAverageLineEdit, ir, 3, Qt::AlignRight);
1000 ppp2Layout->addWidget(new QLabel("Averaging (min)") , ir, 4);
1001 ppp2Layout->addWidget(_pppQuickStartLineEdit, ir, 5, Qt::AlignRight);
1002 ppp2Layout->addWidget(new QLabel("Quick-Start (sec) "), ir, 6);
1003 ppp2Layout->addWidget(_pppMaxSolGapLineEdit, ir, 7, Qt::AlignRight);
1004 ppp2Layout->addWidget(new QLabel("Max Sol. Gap (sec)"), ir, 8);
1005 ++ir;
1006 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1007 ppp2Layout->addWidget(_pppAudioResponseLineEdit, ir, 1, Qt::AlignRight);
1008 ppp2Layout->addWidget(new QLabel("Audio response (m)"), ir, 2);
1009 ++ir;
1010 ppp2Layout->addWidget(new QLabel("Sigmas"), ir, 0);
1011 ppp2Layout->addWidget(_pppSigCLineEdit, ir, 1, Qt::AlignRight);
1012 ppp2Layout->addWidget(new QLabel("Code"), ir, 2);
1013 ppp2Layout->addWidget(_pppSigPLineEdit, ir, 3);
1014 ppp2Layout->addWidget(new QLabel("Phase"), ir, 4);
1015 ++ir;
1016 ppp2Layout->addWidget(new QLabel("Sigmas cont'd"), ir, 0);
1017 ppp2Layout->addWidget(_pppSigCrd0, ir, 1, Qt::AlignRight);
1018 ppp2Layout->addWidget(new QLabel("XYZ Init "), ir, 2);
1019 ppp2Layout->addWidget(_pppSigCrdP, ir, 3, Qt::AlignRight);
1020 ppp2Layout->addWidget(new QLabel("XYZ White Noise "), ir, 4);
1021 ppp2Layout->addWidget(_pppSigTrp0, ir, 5, Qt::AlignRight);
1022 ppp2Layout->addWidget(new QLabel("Tropo Init "), ir, 6);
1023 ppp2Layout->addWidget(_pppSigTrpP, ir, 7);
1024 ppp2Layout->addWidget(new QLabel("Tropo White Noise"), ir, 8);
1025 ++ir;
1026 ppp2Layout->addWidget(new QLabel(""), ir, 0);
1027
1028 ppp2group->setLayout(ppp2Layout);
1029
1030 // PPP Client (third panel)
1031 // ------------------------
1032 QVBoxLayout* ppp3Layout = new QVBoxLayout;
1033 ppp3Layout->addWidget(new QLabel("Precise Point Positioning, Panel 3."));
1034 ppp3Layout->addSpacing(ww);
1035
1036 QHBoxLayout* ppp3LayoutHlp1 = new QHBoxLayout;
1037 _pppPlotCoordinates = new QCheckBox();
1038 _pppPlotCoordinates->setCheckState(Qt::CheckState(settings.value("pppPlotCoordinates").toInt()));
1039 ppp3LayoutHlp1->addWidget(new QLabel("PPP Plot"));
1040 ppp3LayoutHlp1->addWidget(_pppPlotCoordinates);
1041 ppp3LayoutHlp1->addStretch();
1042 ppp3Layout->addLayout(ppp3LayoutHlp1);
1043 ppp3Layout->addSpacing(ww);
1044
1045 QHBoxLayout* ppp3LayoutHlp2 = new QHBoxLayout;
1046 _mapWinButton = new QPushButton;
1047 _mapWinButton->setText("Track Plot");
1048 connect(_mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1049 ppp3LayoutHlp2->addWidget(_mapWinButton);
1050
1051 ppp3LayoutHlp2->addSpacing(5*ww);
1052
1053 _gmRadioButton = new QRadioButton;
1054 _gmRadioButton->setChecked(!settings.value("useOsmMap").toBool());
1055 ppp3LayoutHlp2->addWidget(new QLabel("Google"));
1056 ppp3LayoutHlp2->addWidget(_gmRadioButton);
1057
1058 _osmRadioButton = new QRadioButton;
1059 _osmRadioButton->setChecked(settings.value("useOsmMap").toBool());
1060 ppp3LayoutHlp2->addWidget(new QLabel("OSM"));
1061 ppp3LayoutHlp2->addWidget(_osmRadioButton);
1062
1063 ppp3LayoutHlp2->addSpacing(5*ww);
1064
1065 _mapWinTraceCheckBox = new QCheckBox;
1066 _mapWinTraceCheckBox->setCheckState(Qt::CheckState(settings.value("mapWinTrace").toInt()));
1067 ppp3LayoutHlp2->addWidget(new QLabel("Trace"));
1068 ppp3LayoutHlp2->addWidget(_mapWinTraceCheckBox);
1069
1070 ppp3LayoutHlp2->addSpacing(5*ww);
1071
1072 _mapSpeedSlider = new QSlider;
1073 _mapSpeedSlider->setOrientation(Qt::Horizontal);
1074 _mapSpeedSlider->setRange(1, 100);
1075 _mapSpeedSlider->setTickPosition(QSlider::TicksBelow);
1076 _mapSpeedSlider->setTickInterval(10);
1077 int speed = settings.value("mapSpeed").toInt();
1078 if (speed == 0) speed = _mapSpeedSlider->maximum();
1079 _mapSpeedSlider->setSliderPosition(speed);
1080 ppp3LayoutHlp2->addWidget(new QLabel("Speed"));
1081 ppp3LayoutHlp2->addWidget(_mapSpeedSlider);
1082
1083 ppp3LayoutHlp2->addStretch();
1084 ppp3Layout->addLayout(ppp3LayoutHlp2);
1085
1086 ppp3Layout->addStretch();
1087 ppp3group->setLayout(ppp3Layout);
1088
1089 // Reqc Processing
1090 // ---------------
1091 _reqcActionComboBox = new QComboBox();
1092 _reqcActionComboBox->setEditable(false);
1093 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1094 ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1095 if (ik != -1) {
1096 _reqcActionComboBox->setCurrentIndex(ik);
1097 }
1098 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1099 this, SLOT(slotBncTextChanged()));
1100
1101 QGridLayout* reqcLayout = new QGridLayout;
1102 _reqcActionComboBox->setMinimumWidth(15*ww);
1103 _reqcActionComboBox->setMaximumWidth(15*ww);
1104
1105 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1106 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1107 _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
1108 _reqcObsFileChooser->setMinimumWidth(15*ww);
1109 _reqcObsFileChooser->setMaximumWidth(15*ww);
1110
1111 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1112 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1113 _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
1114 _reqcNavFileChooser->setMinimumWidth(15*ww);
1115 _reqcNavFileChooser->setMaximumWidth(15*ww);
1116
1117 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1118 _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to a RINEX observation output file."));
1119 _reqcOutObsLineEdit->setMinimumWidth(15*ww);
1120 _reqcOutObsLineEdit->setMaximumWidth(15*ww);
1121
1122 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1123 _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to a RINEX navigation output file."));
1124 _reqcOutNavLineEdit->setMinimumWidth(15*ww);
1125 _reqcOutNavLineEdit->setMaximumWidth(15*ww);
1126
1127 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1128 _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1129 _reqcOutLogLineEdit->setMinimumWidth(15*ww);
1130 _reqcOutLogLineEdit->setMaximumWidth(15*ww);
1131
1132 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1133 _reqcPlotDirLineEdit->setWhatsThis(tr("Specify the directory name for saving plots."));
1134 _reqcPlotDirLineEdit->setMinimumWidth(15*ww);
1135 _reqcPlotDirLineEdit->setMaximumWidth(15*ww);
1136
1137 _reqcSkyPlotSystems = new QComboBox();
1138 _reqcSkyPlotSystems->setEditable(false);
1139 _reqcSkyPlotSystems->addItems(QString("ALL,GPS,GLONASS,Galileo").split(","));
1140 ik = _reqcSkyPlotSystems->findText(settings.value("reqcSkyPlotSystems").toString());
1141 if (ik != -1) {
1142 _reqcSkyPlotSystems->setCurrentIndex(ik);
1143 }
1144
1145 ir = 0;
1146 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check."),ir, 0, 1, 20);
1147 ++ir;
1148 reqcLayout->addWidget(new QLabel("Action"), ir, 0, Qt::AlignLeft);
1149 reqcLayout->addWidget(_reqcActionComboBox, ir, 1, Qt::AlignLeft);
1150 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1151 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3, Qt::AlignRight);
1152 ++ir;
1153 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0, Qt::AlignLeft);
1154 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1, Qt::AlignRight);
1155 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1156 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3, Qt::AlignRight);
1157 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1158 ++ir;
1159 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0, Qt::AlignLeft);
1160 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1, Qt::AlignRight);
1161 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1162 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3, Qt::AlignRight);
1163 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1164 ++ir;
1165 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1, Qt::AlignRight);
1166 reqcLayout->addWidget(new QLabel("Log"), ir, 2, Qt::AlignLeft);
1167 ++ir;
1168 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0, Qt::AlignLeft);
1169 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1, Qt::AlignRight);
1170 ++ir;
1171 reqcLayout->addWidget(new QLabel("Sky plots for"), ir, 0, Qt::AlignLeft);
1172 reqcLayout->addWidget(_reqcSkyPlotSystems, ir, 1, Qt::AlignRight);
1173 ++ir;
1174 reqcLayout->addWidget(new QLabel(""), ir, 1);
1175 reqcLayout->setRowStretch(ir, 999);
1176
1177 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1178 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1179
1180 reqcgroup->setLayout(reqcLayout);
1181
1182 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1183 this, SLOT(slotReqcEditOption()));
1184
1185 // Combine Corrections
1186 // -------------------
1187 QGridLayout* cmbLayout = new QGridLayout;
1188
1189 populateCmbTable();
1190 cmbLayout->addWidget(_cmbTable, 0, 0, 6, 3);
1191 cmbLayout->addWidget(new QLabel(" "), 0, 5);
1192 cmbLayout->addWidget(new QLabel("Combine Broadcast Correction streams."), 0, 6, 1, 50);
1193 cmbLayout->addWidget(new QLabel(" "), 1, 5);
1194 cmbLayout->addWidget(addCmbRowButton, 1, 6);
1195 cmbLayout->addWidget(delCmbRowButton, 1, 7);
1196 cmbLayout->addWidget(new QLabel(" "), 2, 5);
1197 cmbLayout->addWidget(new QLabel("Method"), 2, 6, Qt::AlignRight);
1198 cmbLayout->addWidget(_cmbMethodComboBox, 2, 7, Qt::AlignRight);
1199 cmbLayout->addWidget(new QLabel(" "), 3, 5);
1200 cmbLayout->addWidget(new QLabel("Maximal Residuum"), 3, 6, Qt::AlignRight);
1201 cmbLayout->addWidget(_cmbMaxresLineEdit, 3, 7, Qt::AlignRight);
1202 cmbLayout->addWidget(new QLabel(" "), 4, 5);
1203 cmbLayout->addWidget(new QLabel("Sampling"), 4, 6, Qt::AlignRight);
1204 cmbLayout->addWidget(_cmbSamplSpinBox, 4, 7, Qt::AlignRight);
1205 cmbLayout->addWidget(new QLabel(" "), 5, 0);
1206
1207 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1208 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1209
1210 cmbgroup->setLayout(cmbLayout);
1211
1212 // Upload Layout (Clocks)
1213 // ----------------------
1214 QGridLayout* uploadHlpLayout = new QGridLayout();
1215
1216 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1217 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1218 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1219
1220 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1221 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1222 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1223 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1224 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1225 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1226 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1227 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1228 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1229 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1230 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1231
1232 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1233 populateUploadTable();
1234
1235 uploadLayout->addWidget(new QLabel("Upload RTCMv3 Broadcast Corrections to caster."));
1236 uploadLayout->addWidget(_uploadTable);
1237 uploadLayout->addLayout(uploadHlpLayout);
1238
1239 uploadgroup->setLayout(uploadLayout);
1240
1241 // Upload Layout (Ephemeris)
1242 // -------------------------
1243 QGridLayout* uploadLayoutEph = new QGridLayout;
1244
1245 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1246 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1247 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1248 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1249
1250 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster."), 0, 0, 1, 50);
1251 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1252 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1253 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1254 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1255 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1256 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1257 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1258 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1259 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1260 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1261 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1262 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1263 uploadLayoutEph->addWidget(new QLabel(" "), 5, 0);
1264 uploadLayoutEph->addWidget(new QLabel(" "), 6, 0);
1265
1266 uploadEphgroup->setLayout(uploadLayoutEph);
1267
1268 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1269 this, SLOT(slotBncTextChanged()));
1270
1271#ifdef RTROVER_INTERFACE
1272 QWidget* rtroverGroup = new QWidget();
1273 _aogroup->addTab(rtroverGroup,tr("RTRover"));
1274 QGridLayout* rtroverLayout = new QGridLayout();
1275
1276 _rtroverModeComboBox = new QComboBox();
1277
1278 _rtroverModeComboBox->setEditable(false);
1279 _rtroverModeComboBox->addItems(QString(",PPP_DF,SPP_DF,PPP_SF,SPP_SF,PPP_AR,RTK,PPP_FTTF").split(","));
1280 ik = _rtroverModeComboBox->findText(settings.value("rtroverMode").toString());
1281 if (ik != -1) {
1282 _rtroverModeComboBox->setCurrentIndex(ik);
1283 }
1284 _rtroverModeComboBox->setMinimumWidth(10*ww);
1285
1286 _rtroverRoverMountLineEdit = new QLineEdit(settings.value("rtroverRoverMount").toString());
1287 _rtroverRoverMountLineEdit->setMaximumWidth(8*ww);
1288 _rtroverCorrMountLineEdit = new QLineEdit(settings.value("rtroverCorrMount").toString());
1289 _rtroverCorrMountLineEdit->setMaximumWidth(8*ww);
1290 _rtroverBaseMountLineEdit = new QLineEdit(settings.value("rtroverBaseMount").toString());
1291 _rtroverBaseMountLineEdit->setMaximumWidth(8*ww);
1292 _rtroverRoverRefCrdXLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdX").toString());
1293 _rtroverRoverRefCrdYLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdY").toString());
1294 _rtroverRoverRefCrdZLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdZ").toString());
1295 _rtroverBaseRefCrdXLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdX").toString());
1296 _rtroverBaseRefCrdYLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdY").toString());
1297 _rtroverBaseCrdZLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdZ").toString());
1298 _rtroverRoverDNLineEdit = new QLineEdit(settings.value("rtroverRoverDN").toString());
1299 _rtroverRoverDNLineEdit->setMaximumWidth(6*ww);
1300 _rtroverRoverDELineEdit = new QLineEdit(settings.value("rtroverRoverDE").toString());
1301 _rtroverRoverDELineEdit->setMaximumWidth(6*ww);
1302 _rtroverRoverDULineEdit = new QLineEdit(settings.value("rtroverRoverDU").toString());
1303 _rtroverRoverDULineEdit->setMaximumWidth(6*ww);
1304 _rtroverBaseDNLineEdit = new QLineEdit(settings.value("rtroverBaseDN").toString());
1305 _rtroverBaseDNLineEdit->setMaximumWidth(6*ww);
1306 _rtroverBaseDELineEdit = new QLineEdit(settings.value("rtroverBaseDE").toString());
1307 _rtroverBaseDELineEdit->setMaximumWidth(6*ww);
1308 _rtroverBaseDULineEdit = new QLineEdit(settings.value("rtroverBaseDU").toString());
1309 _rtroverBaseDULineEdit->setMaximumWidth(6*ww);
1310 _rtroverRoverAntennaLineEdit = new QLineEdit(settings.value("rtroverRoverAntenna").toString());
1311 _rtroverBaseAntennaLineEdit = new QLineEdit(settings.value("rtroverBaseAntenna").toString());
1312 _rtroverAntexFileChooser = new qtFileChooser;
1313 _rtroverAntexFileChooser->setMinimumWidth(12*ww);
1314 _rtroverAntexFileChooser->setFileName(settings.value("rtroverAntex").toString());
1315 _rtroverOutputLineEdit = new QLineEdit(settings.value("rtroverOutput").toString());
1316 _rtroverOutputLineEdit->setMinimumWidth(15*ww);
1317
1318 ir = 0;
1319 rtroverLayout->addWidget(new QLabel("Real-Time Rover"), ir, 0, 1, 2, Qt::AlignLeft);
1320 ++ir;
1321 rtroverLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
1322 rtroverLayout->addWidget(_rtroverModeComboBox, ir, 1, Qt::AlignRight);
1323 rtroverLayout->addWidget(_rtroverRoverMountLineEdit, ir, 3, Qt::AlignRight);
1324 rtroverLayout->addWidget(new QLabel("Rover"), ir, 4, Qt::AlignLeft);
1325 rtroverLayout->addWidget(_rtroverCorrMountLineEdit, ir, 5, Qt::AlignRight);
1326 rtroverLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
1327 rtroverLayout->addWidget(_rtroverBaseMountLineEdit, ir, 7, Qt::AlignRight);
1328 rtroverLayout->addWidget(new QLabel("Base"), ir, 8, Qt::AlignLeft);
1329 ++ir;
1330 rtroverLayout->addWidget(new QLabel("Rover coordinates"), ir, 0, Qt::AlignLeft);
1331 rtroverLayout->addWidget(_rtroverRoverRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1332 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1333 rtroverLayout->addWidget(_rtroverRoverRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1334 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1335 rtroverLayout->addWidget(_rtroverRoverRefCrdZLineEdit, ir, 5, Qt::AlignRight);
1336 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1337 ++ir;
1338 rtroverLayout->addWidget(_rtroverRoverDNLineEdit, ir, 1, Qt::AlignRight);
1339 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1340 rtroverLayout->addWidget(_rtroverRoverDELineEdit, ir, 3, Qt::AlignRight);
1341 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1342 rtroverLayout->addWidget(_rtroverRoverDULineEdit, ir, 5, Qt::AlignRight);
1343 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1344 ++ir;
1345 rtroverLayout->addWidget(new QLabel("Base coordinates"), ir, 0, Qt::AlignLeft);
1346 rtroverLayout->addWidget(_rtroverBaseRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1347 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1348 rtroverLayout->addWidget(_rtroverBaseRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1349 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1350 rtroverLayout->addWidget(_rtroverBaseCrdZLineEdit, ir, 5, Qt::AlignRight);
1351 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1352 ++ir;
1353 rtroverLayout->addWidget(_rtroverBaseDNLineEdit, ir, 1, Qt::AlignRight);
1354 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1355 rtroverLayout->addWidget(_rtroverBaseDELineEdit, ir, 3, Qt::AlignRight);
1356 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1357 rtroverLayout->addWidget(_rtroverBaseDULineEdit, ir, 5, Qt::AlignRight);
1358 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1359 ++ir;
1360 rtroverLayout->addWidget(new QLabel("ANTEX"), ir, 0, Qt::AlignLeft);
1361 rtroverLayout->addWidget(_rtroverAntexFileChooser, ir, 1, Qt::AlignRight);
1362 rtroverLayout->addWidget(new QLabel("file"), ir, 2, Qt::AlignLeft);
1363 rtroverLayout->addWidget(_rtroverBaseAntennaLineEdit, ir, 3, Qt::AlignRight);
1364 rtroverLayout->addWidget(new QLabel("Ant. Rover"), ir, 4, Qt::AlignLeft);
1365 rtroverLayout->addWidget(_rtroverRoverAntennaLineEdit, ir, 5, Qt::AlignRight);
1366 rtroverLayout->addWidget(new QLabel("Ant. Base"), ir, 6, Qt::AlignLeft);
1367 ++ir;
1368 rtroverLayout->addWidget(new QLabel("Output"), ir, 0, Qt::AlignLeft);
1369 rtroverLayout->addWidget(_rtroverOutputLineEdit, ir, 1, Qt::AlignRight);
1370
1371 rtroverGroup->setLayout(rtroverLayout);
1372#endif
1373
1374 // Main Layout
1375 // -----------
1376 QGridLayout* mLayout = new QGridLayout;
1377 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1378 mLayout->addWidget(_aogroup, 0,0);
1379 mLayout->addWidget(_mountPointsTable, 1,0);
1380 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1381 mLayout->addWidget(_loggroup, 2,0);
1382
1383 _canvas->setLayout(mLayout);
1384
1385 // WhatsThis
1386 // ---------
1387 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1388 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1389 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1390 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1391 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1392 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1393 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1394 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1395 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1396 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1397 _corrTimeSpinBox->setWhatsThis(tr("<p>Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full corr epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application.</p><p>Specifying a value of '0' means that BNC immediately outputs all incoming Broadcast Epemeris Corrections and does not drop any of them for latency reasons.</p>"));
1398 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1399 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1400 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1401 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1402 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1403 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1404 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1405 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1406
1407 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1408 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1409 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1410 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1411 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1412 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1413 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1414 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1415 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1416 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1417 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1418 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1419 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster. The default values can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1420 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1421 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1422 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1423 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1424 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1425 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1426 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1427 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p>"));
1428 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1429 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1430 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1431 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1432 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1433 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1434 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA-GGA messages coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' only when handling a VRS stream and your serial connected receiver doesn't generate NMEA-GGA messages.</p>"));
1435 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
1436 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
1437 _pppMountLineEdit->setWhatsThis(tr("<p>Specify an observations stream by its mountpoint from the 'Streams' list compiled below if you want BNC to estimate coordinates for the affected receiver position through a PPP solution. Example: 'FFMJ1'</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris referring to the satellites' Antenna Phase Centers (APC). Stream CLK11 on NTRIP broadcaster products.igs-ip.net is an example.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver in low repetition rate or don't come at all from there.</p>"));
1438 _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'. Corrections must refer to satellite Antenna Phase Centers (APC).</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combine Corrections' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
1439 _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
1440 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check following UNAVCO's famous 'teqc' program.</p>"));
1441 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1442 _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
1443 _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
1444 _pppGLONASSCheckBox->setWhatsThis(tr("<p>By default BNC does not use GLONASS observations in PPP mode.</p><p>Tick 'Use GLONASS' for adding GLONASS observations to GPS and Galileo (optional) in a PPP solution.</p>"));
1445 _pppGalileoCheckBox->setWhatsThis(tr("<p>By default BNC does not use Galileo observations in PPP mode.</p><p>Tick 'Use Galileo' for adding Galileo observations to GPS and GLONASS (optional) in a PPP solution.</p>"));
1446 _pppPlotCoordinates->setWhatsThis(tr("<p>BNC will plot PPP results in the 'PPP Plot' tab as North (red), East (green) and Up (blue) displacements when this option is selected. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes.</p><p>Note that a PPP time series makes only sense for a stationary operated receiver."));
1447 _mapWinButton->setWhatsThis(tr("<p>You make like to track your rover position using Google Maps or Open Street Map as a background map. Track plots can be produced with BNC in 'Realtime-PPP', 'Realtime-SPP' and 'Post-Processing' mode.</p><p>The 'Track Plot' button opens a windows showing a map according to specified options.</p><p>When in 'Post-Processing' mode you should not forget to specify a proxy under the 'Network' tab if that is operated in front of BNC."));
1448 _gmRadioButton->setWhatsThis(tr("<p>Specify Google Maps as the background for your rover positions."));
1449 _osmRadioButton->setWhatsThis(tr("<p>Specify Open Street Map as the background for your rover positions."));
1450 _mapWinTraceCheckBox->setWhatsThis(tr("<p>Hit 'Trace' to plot each position as a single dot on the map."));
1451 _mapSpeedSlider->setWhatsThis(tr("<p>With BNC in PPP post-processing mode you can specify the speed of computations as appropriate for visualization. Note that you can adjust 'Speed' on-the-fly while BNC is already processing your observations."));
1452 _pppNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where PPP results are saved as NMEA messages.</p>"));
1453 _pppNMEAPortLineEdit->setWhatsThis(tr("<p>Specify an IP port number to output PPP results as NMEA messages through an IP port.</p>"));
1454 _pppSigCLineEdit->setWhatsThis(tr("<p>Enter a sigma for your code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of code observations to a PPP solution based on a combination of code and phase data. 5.0 (default) is likely to be an appropriate choice.</p>"));
1455 _pppQuickStartLineEdit->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solution to a known XYZ coordinate as introduced above and adjust a sigma 'XYZ Ini' according to the coordinate's precision. Fixing the coordinate is done in BNC through setting the 'Sigma XYZ Noise' you define below temporarily to zero.</p><p>This so-called Quick-Start option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the know position throughout the startup period.</p><p>A value of 120 is likely to be an appropriate choice for 'Quick-Start'. Default is an empty option field, meaning that you don't want BNC to operate in Quick-Start mode.</p>"));
1456 _pppMaxSolGapLineEdit->setWhatsThis(tr("<p>Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive solutions exceed this limit, the algorithm returns into Quick-Start mode and fixes the introduced reference coordinate for the specified period. A value of '60' seconds could be an appropriate choice.</p><p>This option makes only sense for a stationary operated receiver where solution convergence can be enforced because a good approximation for the rover position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages.</p>"));
1457 _pppAudioResponseLineEdit->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
1458 _pppSigPLineEdit->setWhatsThis(tr("<p>Enter a sigma for your phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of phase observations to a PPP solutions based on a combination of code and phase data. 0.02 (default) is likely to be an appropriate choice.</p>"));
1459 _pppAverageLineEdit->setWhatsThis(tr("<p>Enter the length of a sliding time window in minutes. BNC will continuously output moving average positions computed from those individual positions obtained most recently throughout this period.</p><p>An empty option field (default) means that you don't want BNC to output moving average positions.</p>"));
1460 _pppSigCrd0->setWhatsThis(tr("<p>Enter a sigma in meters for the initial XYZ coordinate componentes. A value of 100.0 (default) may be an appropriate choice. However, this value may be significantly smaller (i.e. 0.01) when starting for example from a station with known XZY position in Quick-Start mode."));
1461 _pppSigCrdP->setWhatsThis(tr("<p>Enter a sigma in meters for the white noise of estimated XYZ coordinate components. A value of 100.0 (default) may be appropriate considering the potential movement of a rover position.</p>"));
1462 _pppSigTrp0->setWhatsThis(tr("<p>Enter a sigma in meters for the a-priory model based tropospheric delay estimation. A value of 0.1 (default) may be an appropriate choice.</p>"));
1463 _pppSigTrpP->setWhatsThis(tr("<p>Enter a sigma in meters per second to describe the expected variation of the tropospheric effect.</p><p>Supposing 1Hz observation data, a value of 3e-6 (default) would mean that the tropospheric effect may vary for 3600 * 3e-6 = 0.01 meters per hour.</p>"));
1464 _pppRefCrdXLineEdit->setWhatsThis(tr("<p>Enter reference coordinate X of the receiver's position.</p><p>This option only makes sense in static observation conditions.</p>"));
1465 _pppRefCrdYLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Y of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1466 _pppRefCrdZLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Z of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1467 _pppRefdNLineEdit->setWhatsThis(tr("<p>Enter north antenna excentricity.</p>"));
1468 _pppRefdELineEdit->setWhatsThis(tr("<p>Enter east antenna excentricity.</p>"));
1469 _pppRefdULineEdit->setWhatsThis(tr("<p>Enter up antenna excentricity.</p>"));
1470 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1471 _pppSync->setWhatsThis(tr(
1472 "<p> Zero value (or empty field, default) means that BNC processes each epoch of data "
1473 "immediately after its arrival using satellite clock corrections available at "
1474 "that time.</p><p> Non-zero value 'Sync Corr' (i.e. 5) means that the epochs of data "
1475 "are buffered and the processing of each epoch is postponed till the satellite clock "
1476 "corrections not older than 'Sync Corr' seconds are available.<p>"));
1477 _pppAntexFileChooser->setWhatsThis(tr("<p>IGS provides a file containing absolute phase center corrections for GNSS satellite and receiver antennas in ANTEX format. Entering the full path to such an ANTEX file is required for correcting observations for antenna phase center offsets and variations. It allows you to specify the name of your receiver's antenna (as contained in the ANTEX file) to apply such corrections.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets and variations.</p>"));
1478 _pppAntennaLineEdit->setWhatsThis(tr("<p>Specify the receiver's antenna name as defined in your ANTEX file. Observations will be corrected for the antenna phase center's offset which may result in a reduction of a few centimeters at max. Corrections for phase center variations are not yet applied by BNC. The specified name must consist of 20 characters. Add trailing blanks if the antenna name has less then 20 characters.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets.</p>"));
1479 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.<ul><li>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</li><li>Note also that you need to tick 'Use GLONASS' which is part ot the 'PPP (2)' panel in case you want to produce an GPS plus GLONASS combination.</li></ul></p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1480 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1481 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval. Clock and orbit corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1482 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1483 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><ul><li>As an SP3 file contents should be referred to the satellites Center of Mass (CoM) while correctors are referred to the satellites Antenna Phase Center (APC), an offset has to be applied which is available from an IGS ANTEX file. You should therefore specify the 'ANTEX File' path under tab 'PPP (2)' if you want to save the stream contents in SP3 format. If you don't specify an 'ANTEX File' path there, the SP3 file contents will be referred to the satellites APCs.</li></ul></p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1484 _postObsFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Observation file."));
1485 _postNavFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Navigation file."));
1486 _postCorrFileChooser->setWhatsThis(tr("Full path to Broadcast Corrections file as previously saved with BNC in plain ASCII format."));
1487 _postOutLineEdit->setWhatsThis(tr("Full path to file with post processing PPP results. "));
1488 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1489 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1490 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1491 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1492 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1493 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1494 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1495 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1496 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1497
1498 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1499 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1500 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1501 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1502 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1503 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1504
1505 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1506 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1507 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1508
1509 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1510 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1511// Weber
1512
1513 // Enable/Disable all Widgets
1514 // --------------------------
1515 slotBncTextChanged();
1516 enableStartStop();
1517
1518 // Auto start
1519 // ----------
1520 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1521 slotStart();
1522 }
1523}
1524
1525// Destructor
1526////////////////////////////////////////////////////////////////////////////
1527bncWindow::~bncWindow() {
1528 delete _caster;
1529 delete _casterEph;
1530}
1531
1532//
1533////////////////////////////////////////////////////////////////////////////
1534void bncWindow::populateMountPointsTable() {
1535
1536 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1537 _mountPointsTable->removeRow(iRow);
1538 }
1539
1540 bncSettings settings;
1541
1542 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1543 int iRow = 0;
1544 while (it.hasNext()) {
1545 QStringList hlp = it.next().split(" ");
1546 if (hlp.size() < 5) continue;
1547 _mountPointsTable->insertRow(iRow);
1548
1549 QUrl url(hlp[0]);
1550
1551 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1552 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1553 QString nmea(hlp[4]);
1554 if (hlp[5] == "S") {
1555 fullPath = hlp[0].replace(0,2,"");
1556 }
1557 QString ntripVersion = "2";
1558 if (hlp.size() >= 6) {
1559 ntripVersion = (hlp[5]);
1560 }
1561
1562 QTableWidgetItem* it;
1563 it = new QTableWidgetItem(url.userInfo());
1564 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1565 _mountPointsTable->setItem(iRow, 0, it);
1566
1567 it = new QTableWidgetItem(fullPath);
1568 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1569 _mountPointsTable->setItem(iRow, 1, it);
1570
1571 it = new QTableWidgetItem(format);
1572 _mountPointsTable->setItem(iRow, 2, it);
1573
1574 if (nmea == "yes") {
1575 it = new QTableWidgetItem(latitude);
1576 _mountPointsTable->setItem(iRow, 3, it);
1577 it = new QTableWidgetItem(longitude);
1578 _mountPointsTable->setItem(iRow, 4, it);
1579 } else {
1580 it = new QTableWidgetItem(latitude);
1581 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1582 _mountPointsTable->setItem(iRow, 3, it);
1583 it = new QTableWidgetItem(longitude);
1584 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1585 _mountPointsTable->setItem(iRow, 4, it);
1586 }
1587
1588 it = new QTableWidgetItem(nmea);
1589 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1590 _mountPointsTable->setItem(iRow, 5, it);
1591
1592 it = new QTableWidgetItem(ntripVersion);
1593 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1594 _mountPointsTable->setItem(iRow, 6, it);
1595
1596 bncTableItem* bncIt = new bncTableItem();
1597 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1598 _mountPointsTable->setItem(iRow, 7, bncIt);
1599
1600 iRow++;
1601 }
1602
1603 _mountPointsTable->sortItems(1);
1604
1605 enableStartStop();
1606}
1607
1608// Retrieve Table
1609////////////////////////////////////////////////////////////////////////////
1610void bncWindow::slotAddMountPoints() {
1611
1612 bncSettings settings;
1613 QString proxyHost = settings.value("proxyHost").toString();
1614 int proxyPort = settings.value("proxyPort").toInt();
1615 if (proxyHost != _proxyHostLineEdit->text() ||
1616 proxyPort != _proxyPortLineEdit->text().toInt()) {
1617 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1618 "changed. Use the new ones?",
1619 QMessageBox::Yes, QMessageBox::No,
1620 QMessageBox::NoButton);
1621 if (iRet == QMessageBox::Yes) {
1622 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1623 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1624 }
1625 }
1626
1627 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1628 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1629
1630 QMessageBox msgBox;
1631 msgBox.setIcon(QMessageBox::Question);
1632 msgBox.setWindowTitle("Add Stream");
1633 msgBox.setText("Add stream(s) coming from:");
1634
1635 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1636 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1637 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1638 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1639 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1640
1641 msgBox.exec();
1642
1643 if (msgBox.clickedButton() == buttonNtrip) {
1644 bncTableDlg* dlg = new bncTableDlg(this);
1645 dlg->move(this->pos().x()+50, this->pos().y()+50);
1646 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1647 this, SLOT(slotNewMountPoints(QStringList*)));
1648 dlg->exec();
1649 delete dlg;
1650 } else if (msgBox.clickedButton() == buttonIP) {
1651 bncIpPort* ipp = new bncIpPort(this);
1652 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1653 this, SLOT(slotNewMountPoints(QStringList*)));
1654 ipp->exec();
1655 delete ipp;
1656 } else if (msgBox.clickedButton() == buttonUDP) {
1657 bncUdpPort* udp = new bncUdpPort(this);
1658 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1659 this, SLOT(slotNewMountPoints(QStringList*)));
1660 udp->exec();
1661 delete udp;
1662 } else if (msgBox.clickedButton() == buttonSerial) {
1663 bncSerialPort* sep = new bncSerialPort(this);
1664 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1665 this, SLOT(slotNewMountPoints(QStringList*)));
1666 sep->exec();
1667 delete sep;
1668 } else if (msgBox.clickedButton() == buttonCancel) {
1669 // Cancel
1670 }
1671
1672 enableStartStop();
1673}
1674
1675// Delete Selected Mount Points
1676////////////////////////////////////////////////////////////////////////////
1677void bncWindow::slotDeleteMountPoints() {
1678
1679 int nRows = _mountPointsTable->rowCount();
1680 bool flg[nRows];
1681 for (int iRow = 0; iRow < nRows; iRow++) {
1682 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1683 flg[iRow] = true;
1684 }
1685 else {
1686 flg[iRow] = false;
1687 }
1688 }
1689 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1690 if (flg[iRow]) {
1691 _mountPointsTable->removeRow(iRow);
1692 }
1693 }
1694 _actDeleteMountPoints->setEnabled(false);
1695
1696 enableStartStop();
1697}
1698
1699// New Mount Points Selected
1700////////////////////////////////////////////////////////////////////////////
1701void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1702 int iRow = 0;
1703 QListIterator<QString> it(*mountPoints);
1704 while (it.hasNext()) {
1705 QStringList hlp = it.next().split(" ");
1706 QUrl url(hlp[0]);
1707 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1708 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1709 QString nmea(hlp[4]);
1710 if (hlp[5] == "S") {
1711 fullPath = hlp[0].replace(0,2,"");
1712 }
1713 QString ntripVersion = "2";
1714 if (hlp.size() >= 6) {
1715 ntripVersion = (hlp[5]);
1716 }
1717
1718 _mountPointsTable->insertRow(iRow);
1719
1720 QTableWidgetItem* it;
1721 it = new QTableWidgetItem(url.userInfo());
1722 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1723 _mountPointsTable->setItem(iRow, 0, it);
1724
1725 it = new QTableWidgetItem(fullPath);
1726 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1727 _mountPointsTable->setItem(iRow, 1, it);
1728
1729 it = new QTableWidgetItem(format);
1730 _mountPointsTable->setItem(iRow, 2, it);
1731
1732 if (nmea == "yes") {
1733 it = new QTableWidgetItem(latitude);
1734 _mountPointsTable->setItem(iRow, 3, it);
1735 it = new QTableWidgetItem(longitude);
1736 _mountPointsTable->setItem(iRow, 4, it);
1737 } else {
1738 it = new QTableWidgetItem(latitude);
1739 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1740 _mountPointsTable->setItem(iRow, 3, it);
1741 it = new QTableWidgetItem(longitude);
1742 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1743 _mountPointsTable->setItem(iRow, 4, it);
1744 }
1745
1746 it = new QTableWidgetItem(nmea);
1747 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1748 _mountPointsTable->setItem(iRow, 5, it);
1749
1750 it = new QTableWidgetItem(ntripVersion);
1751 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1752 _mountPointsTable->setItem(iRow, 6, it);
1753
1754 bncTableItem* bncIt = new bncTableItem();
1755 _mountPointsTable->setItem(iRow, 7, bncIt);
1756
1757 iRow++;
1758 }
1759 _mountPointsTable->hideColumn(0);
1760 _mountPointsTable->sortItems(1);
1761 delete mountPoints;
1762
1763 enableStartStop();
1764}
1765
1766// Save Options (serialize)
1767////////////////////////////////////////////////////////////////////////////
1768void bncWindow::slotSaveOptions() {
1769 saveOptions();
1770 bncSettings settings;
1771 settings.sync();
1772}
1773
1774// Save Options (memory only)
1775////////////////////////////////////////////////////////////////////////////
1776void bncWindow::saveOptions() {
1777
1778 QStringList mountPoints;
1779 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1780
1781 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1782 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1783 "@" + _mountPointsTable->item(iRow, 1)->text() );
1784
1785 mountPoints.append(url.toString() + " " +
1786 _mountPointsTable->item(iRow, 2)->text()
1787 + " " + _mountPointsTable->item(iRow, 3)->text()
1788 + " " + _mountPointsTable->item(iRow, 4)->text()
1789 + " " + _mountPointsTable->item(iRow, 5)->text()
1790 + " " + _mountPointsTable->item(iRow, 6)->text());
1791 } else {
1792 mountPoints.append(
1793 "//" + _mountPointsTable->item(iRow, 1)->text()
1794 + " " + _mountPointsTable->item(iRow, 2)->text()
1795 + " " + _mountPointsTable->item(iRow, 3)->text()
1796 + " " + _mountPointsTable->item(iRow, 4)->text()
1797 + " " + _mountPointsTable->item(iRow, 5)->text()
1798 + " " + _mountPointsTable->item(iRow, 6)->text());
1799 }
1800 }
1801
1802 QStringList combineStreams;
1803 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1804 QString hlp;
1805 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1806 if (_cmbTable->item(iRow, iCol)) {
1807 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1808 }
1809 }
1810 if (!hlp.isEmpty()) {
1811 combineStreams << hlp;
1812 }
1813 }
1814
1815 QStringList uploadMountpointsOut;
1816 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1817 QString hlp;
1818 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1819 if (_uploadTable->cellWidget(iRow, iCol) &&
1820 (iCol == 3 || iCol == 4 || iCol == 5)) {
1821 if (iCol == 3) {
1822 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1823 hlp += passwd->text() + ",";
1824 }
1825 else if (iCol == 4) {
1826 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1827 hlp += system->currentText() + ",";
1828 }
1829 else if (iCol == 5) {
1830 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1831 QString state; state.setNum(com->checkState());
1832 hlp += state + ",";
1833 }
1834 }
1835 else if (_uploadTable->item(iRow, iCol)) {
1836 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1837 }
1838 }
1839 if (!hlp.isEmpty()) {
1840 uploadMountpointsOut << hlp;
1841 }
1842 }
1843
1844 bncSettings settings;
1845
1846 settings.setValue("startTab", _aogroup->currentIndex());
1847 settings.setValue("statusTab", _loggroup->currentIndex());
1848 settings.setValue("mountPoints", mountPoints);
1849// Network
1850 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1851 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1852 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1853 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1854// General
1855 settings.setValue("logFile", _logFileLineEdit->text());
1856 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1857 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1858 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1859 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1860// RINEX Observations
1861 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1862 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1863 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1864 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1865 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1866 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1867// RINEX Ephemeris
1868 settings.setValue("ephPath", _ephPathLineEdit->text());
1869 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1870 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1871 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1872// Broadcast Corrections
1873 settings.setValue("corrPath", _corrPathLineEdit->text());
1874 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1875 settings.setValue("corrPort", _corrPortLineEdit->text());
1876 settings.setValue("corrTime", _corrTimeSpinBox->value());
1877// Feed Engine
1878 settings.setValue("outPort", _outPortLineEdit->text());
1879 settings.setValue("waitTime", _waitTimeSpinBox->value());
1880 settings.setValue("binSampl", _binSamplSpinBox->value());
1881 settings.setValue("outFile", _outFileLineEdit->text());
1882 settings.setValue("outUPort", _outUPortLineEdit->text());
1883// Serial Output
1884 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1885 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1886 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1887 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1888 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1889 settings.setValue("serialParity", _serialParityComboBox->currentText());
1890 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1891 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1892 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1893 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1894// Outages
1895 settings.setValue("obsRate", _obsRateComboBox->currentText());
1896 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1897 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1898 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1899// Miscellaneous
1900 settings.setValue("miscMount", _miscMountLineEdit->text());
1901 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1902 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1903// PPPP
1904 settings.setValue("pppSPP", _pppSPPComboBox->currentText());
1905 settings.setValue("pppMount", _pppMountLineEdit->text());
1906 settings.setValue("pppCorrMount",_pppCorrMountLineEdit->text());
1907 settings.setValue("pppRefCrdX", _pppRefCrdXLineEdit->text());
1908 settings.setValue("pppRefCrdY", _pppRefCrdYLineEdit->text());
1909 settings.setValue("pppRefCrdZ", _pppRefCrdZLineEdit->text());
1910 settings.setValue("pppRefdN", _pppRefdNLineEdit->text());
1911 settings.setValue("pppRefdE", _pppRefdELineEdit->text());
1912 settings.setValue("pppRefdU", _pppRefdULineEdit->text());
1913 settings.setValue("nmeaFile", _pppNMEALineEdit->text());
1914 settings.setValue("nmeaPort", _pppNMEAPortLineEdit->text());
1915 settings.setValue("pppPlotCoordinates", _pppPlotCoordinates->checkState());
1916 settings.setValue("useOsmMap", _osmRadioButton->isChecked());
1917 settings.setValue("mapWinTrace", _mapWinTraceCheckBox->checkState());
1918 settings.setValue("mapSpeed", _mapSpeedSlider->value());
1919 settings.setValue("postObsFile", _postObsFileChooser->fileName());
1920 settings.setValue("postNavFile", _postNavFileChooser->fileName());
1921 settings.setValue("postCorrFile", _postCorrFileChooser->fileName());
1922 settings.setValue("postOutFile", _postOutLineEdit->text());
1923 settings.setValue("pppAntenna", _pppAntennaLineEdit->text());
1924 settings.setValue("pppAntex", _pppAntexFileChooser->fileName());
1925 settings.setValue("pppUsePhase", _pppUsePhaseCheckBox->checkState());
1926 settings.setValue("pppEstTropo", _pppEstTropoCheckBox->checkState());
1927 settings.setValue("pppGLONASS", _pppGLONASSCheckBox->checkState());
1928 settings.setValue("pppGalileo", _pppGalileoCheckBox->checkState());
1929 settings.setValue("pppSync", _pppSync->text());
1930 settings.setValue("pppAverage", _pppAverageLineEdit->text());
1931 settings.setValue("pppQuickStart", _pppQuickStartLineEdit->text());
1932 settings.setValue("pppMaxSolGap", _pppMaxSolGapLineEdit->text());
1933 settings.setValue("pppAudioResponse", _pppAudioResponseLineEdit->text());
1934 settings.setValue("pppSigmaCode",_pppSigCLineEdit->text());
1935 settings.setValue("pppSigmaPhase",_pppSigPLineEdit->text());
1936 settings.setValue("pppSigCrd0",_pppSigCrd0->text());
1937 settings.setValue("pppSigCrdP",_pppSigCrdP->text());
1938 settings.setValue("pppSigTrp0",_pppSigTrp0->text());
1939 settings.setValue("pppSigTrpP",_pppSigTrpP->text());
1940// Reqc
1941 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1942 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1943 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1944 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1945 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1946 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1947 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1948 settings.setValue("reqcSkyPlotSystems", _reqcSkyPlotSystems->currentText());
1949// Combine Corrections
1950 if (!combineStreams.isEmpty()) {
1951 settings.setValue("combineStreams", combineStreams);
1952 }
1953 else {
1954 settings.setValue("combineStreams", "");
1955 }
1956 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1957 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1958 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1959// Upload Corrections
1960 if (!uploadMountpointsOut.isEmpty()) {
1961 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1962 }
1963 else {
1964 settings.setValue("uploadMountpointsOut", "");
1965 }
1966 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1967 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1968 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1969 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1970// Upload Ephemeris
1971 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1972 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1973 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1974 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1975 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1976
1977#ifdef RTROVER_INTERFACE
1978 settings.setValue("rtroverMode", _rtroverModeComboBox->currentText());
1979 settings.setValue("rtroverRoverMount", _rtroverRoverMountLineEdit->text());
1980 settings.setValue("rtroverCorrMount", _rtroverCorrMountLineEdit->text());
1981 settings.setValue("rtroverBaseMount", _rtroverBaseMountLineEdit->text());
1982 settings.setValue("rtroverRoverRefCrdX", _rtroverRoverRefCrdXLineEdit->text());
1983 settings.setValue("rtroverRoverRefCrdY", _rtroverRoverRefCrdYLineEdit->text());
1984 settings.setValue("rtroverRoverRefCrdZ", _rtroverRoverRefCrdZLineEdit->text());
1985 settings.setValue("rtroverBaseRefCrdX", _rtroverBaseRefCrdXLineEdit->text());
1986 settings.setValue("rtroverBaseRefCrdY", _rtroverBaseRefCrdYLineEdit->text());
1987 settings.setValue("rtroverBaseRefCrdZ", _rtroverBaseCrdZLineEdit->text());
1988 settings.setValue("rtroverRoverDN", _rtroverRoverDNLineEdit->text());
1989 settings.setValue("rtroverRoverDE", _rtroverRoverDELineEdit->text());
1990 settings.setValue("rtroverRoverDU", _rtroverRoverDULineEdit->text());
1991 settings.setValue("rtroverBaseDN", _rtroverBaseDNLineEdit->text());
1992 settings.setValue("rtroverBaseDE", _rtroverBaseDELineEdit->text());
1993 settings.setValue("rtroverBaseDU", _rtroverBaseDULineEdit->text());
1994 settings.setValue("rtroverRoverAntenna", _rtroverRoverAntennaLineEdit->text());
1995 settings.setValue("rtroverBaseAntenna", _rtroverBaseAntennaLineEdit->text());
1996 settings.setValue("rtroverAntex", _rtroverAntexFileChooser->fileName());
1997 settings.setValue("rtroverOutput", _rtroverOutputLineEdit->text());
1998#endif
1999
2000 if (_caster) {
2001 _caster->readMountPoints();
2002 }
2003}
2004
2005// All get slots terminated
2006////////////////////////////////////////////////////////////////////////////
2007void bncWindow::slotGetThreadsFinished() {
2008 BNC_CORE->slotMessage("All Get Threads Terminated", true);
2009 delete _caster; _caster = 0;
2010 delete _casterEph; _casterEph = 0;
2011 _runningRealTime = false;
2012}
2013
2014// Start It!
2015////////////////////////////////////////////////////////////////////////////
2016void bncWindow::slotStart() {
2017 saveOptions();
2018 if ( _pppSPPComboBox->currentText() == "Post-Processing" ) {
2019 startPostProcessingPPP();
2020 }
2021 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2022 startPostProcessingReqc();
2023 }
2024 else {
2025 startRealTime();
2026 }
2027}
2028
2029// Start Real-Time (Retrieve Data etc.)
2030////////////////////////////////////////////////////////////////////////////
2031void bncWindow::startRealTime() {
2032
2033 _runningRealTime = true;
2034
2035 _bncFigurePPP->reset();
2036
2037 _actDeleteMountPoints->setEnabled(false);
2038
2039 enableStartStop();
2040
2041 _caster = new bncCaster(_outFileLineEdit->text(),
2042 _outPortLineEdit->text().toInt());
2043
2044 BNC_CORE->setPort(_outEphPortLineEdit->text().toInt());
2045 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2046 BNC_CORE->initCombination();
2047
2048 connect(_caster, SIGNAL(getThreadsFinished()),
2049 this, SLOT(slotGetThreadsFinished()));
2050
2051 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2052 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2053
2054 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " =========", true);
2055
2056 bncSettings settings;
2057
2058 QDir rnxdir(settings.value("rnxPath").toString());
2059 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2060
2061 QString rnx_file = settings.value("rnxScript").toString();
2062 if ( !rnx_file.isEmpty() ) {
2063 QFile rnxfile(settings.value("rnxScript").toString());
2064 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2065 }
2066
2067 QDir ephdir(settings.value("ephPath").toString());
2068 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2069
2070 QDir corrdir(settings.value("corrPath").toString());
2071 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2072
2073 QString advise_file = settings.value("adviseScript").toString();
2074 if ( !advise_file.isEmpty() ) {
2075 QFile advisefile(settings.value("adviseScript").toString());
2076 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2077 }
2078
2079 QString ant_file = settings.value("pppAntex").toString();
2080 if ( !ant_file.isEmpty() ) {
2081 QFile anxfile(settings.value("pppAntex").toString());
2082 if (!anxfile.exists()) BNC_CORE->slotMessage("Cannot find IGS ANTEX file", true);
2083 }
2084
2085 _caster->readMountPoints();
2086
2087 _casterEph = new bncEphUploadCaster();
2088 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2089 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2090}
2091
2092// Retrieve Data
2093////////////////////////////////////////////////////////////////////////////
2094void bncWindow::slotStop() {
2095 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
2096 QMessageBox::Yes, QMessageBox::No,
2097 QMessageBox::NoButton);
2098 if (iRet == QMessageBox::Yes) {
2099 BNC_CORE->stopCombination();
2100 delete _caster; _caster = 0;
2101 delete _casterEph; _casterEph = 0;
2102 _runningRealTime = false;
2103 enableStartStop();
2104 }
2105}
2106
2107// Close Application gracefully
2108////////////////////////////////////////////////////////////////////////////
2109void bncWindow::closeEvent(QCloseEvent* event) {
2110
2111 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2112 QMessageBox::Yes, QMessageBox::No,
2113 QMessageBox::Cancel);
2114
2115 if (iRet == QMessageBox::Cancel) {
2116 event->ignore();
2117 return;
2118 }
2119 else if (iRet == QMessageBox::Yes) {
2120 slotSaveOptions();
2121 }
2122
2123 if (_postProcessing) {
2124 _postProcessing->terminate();
2125 }
2126
2127 QMainWindow::closeEvent(event);
2128}
2129
2130// User changed the selection of mountPoints
2131////////////////////////////////////////////////////////////////////////////
2132void bncWindow::slotSelectionChanged() {
2133 if (_mountPointsTable->selectedItems().isEmpty()) {
2134 _actDeleteMountPoints->setEnabled(false);
2135 }
2136 else {
2137 _actDeleteMountPoints->setEnabled(true);
2138 }
2139}
2140
2141// Display Program Messages
2142////////////////////////////////////////////////////////////////////////////
2143void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2144
2145#ifdef DEBUG_RTCM2_2021
2146 const int maxBufferSize = 1000;
2147#else
2148 const int maxBufferSize = 10000;
2149#endif
2150
2151 if (! showOnScreen ) {
2152 return;
2153 }
2154
2155 QString txt = _log->toPlainText() + "\n" +
2156 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
2157 _log->clear();
2158 _log->append(txt.right(maxBufferSize));
2159}
2160
2161// About Message
2162////////////////////////////////////////////////////////////////////////////
2163void bncWindow::slotAbout() {
2164 new bncAboutDlg(0);
2165}
2166
2167//Flowchart
2168////////////////////////////////////////////////////////////////////////////
2169void bncWindow::slotFlowchart() {
2170 new bncFlowchartDlg(0);
2171}
2172
2173// Help Window
2174////////////////////////////////////////////////////////////////////////////
2175void bncWindow::slotHelp() {
2176 QUrl url;
2177 url.setPath(":bnchelp.html");
2178 new bncHlpDlg(0, url);
2179}
2180
2181// Select Fonts
2182////////////////////////////////////////////////////////////////////////////
2183void bncWindow::slotFontSel() {
2184 bool ok;
2185 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2186 if (ok) {
2187 bncSettings settings;
2188 settings.setValue("font", newFont.toString());
2189 QApplication::setFont(newFont);
2190 int ww = QFontMetrics(newFont).width('w');
2191 setMinimumSize(60*ww, 80*ww);
2192 resize(60*ww, 80*ww);
2193 }
2194}
2195
2196// Whats This Help
2197void bncWindow::slotWhatsThis() {
2198 QWhatsThis::enterWhatsThisMode();
2199}
2200
2201//
2202////////////////////////////////////////////////////////////////////////////
2203void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2204 _threads = threads;
2205
2206 _bncFigure->updateMountPoints();
2207 _bncFigureLate->updateMountPoints();
2208
2209 populateMountPointsTable();
2210 bncSettings settings;
2211 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
2212 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
2213 QListIterator<bncGetThread*> iTh(threads);
2214 while (iTh.hasNext()) {
2215 bncGetThread* thread = iTh.next();
2216 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2217 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2218 "@" + _mountPointsTable->item(iRow, 1)->text() );
2219 if (url == thread->mountPoint() &&
2220 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
2221 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
2222 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
2223 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2224 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2225 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2226 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2227 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2228 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2229 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2230 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2231 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2232 disconnect(thread,
2233 SIGNAL(newPosition(bncTime, double, double, double)),
2234 _bncFigurePPP,
2235 SLOT(slotNewPosition(bncTime, double, double, double)));
2236 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2237 _bncFigurePPP,
2238 SLOT(slotNewPosition(bncTime, double, double, double)));
2239 }
2240#ifdef QT_WEBKIT
2241 if (_mapWin) {
2242 disconnect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2243 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2244 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2245 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2246 }
2247#endif
2248 break;
2249 }
2250 }
2251 }
2252}
2253
2254//
2255////////////////////////////////////////////////////////////////////////////
2256void bncWindow::CreateMenu() {
2257 // Create Menus
2258 // ------------
2259 _menuFile = menuBar()->addMenu(tr("&File"));
2260 _menuFile->addAction(_actFontSel);
2261 _menuFile->addSeparator();
2262 _menuFile->addAction(_actSaveOpt);
2263 _menuFile->addSeparator();
2264 _menuFile->addAction(_actQuit);
2265
2266 _menuHlp = menuBar()->addMenu(tr("&Help"));
2267 _menuHlp->addAction(_actHelp);
2268 _menuHlp->addAction(_actFlowchart);
2269 _menuHlp->addAction(_actAbout);
2270}
2271
2272// Toolbar
2273////////////////////////////////////////////////////////////////////////////
2274void bncWindow::AddToolbar() {
2275 QToolBar* toolBar = new QToolBar;
2276 addToolBar(Qt::BottomToolBarArea, toolBar);
2277 toolBar->setMovable(false);
2278 toolBar->addAction(_actAddMountPoints);
2279 toolBar->addAction(_actDeleteMountPoints);
2280 toolBar->addAction(_actMapMountPoints);
2281 toolBar->addAction(_actStart);
2282 toolBar->addAction(_actStop);
2283 toolBar->addWidget(new QLabel(" "));
2284 toolBar->addAction(_actwhatsthis);
2285}
2286
2287// About
2288////////////////////////////////////////////////////////////////////////////
2289bncAboutDlg::bncAboutDlg(QWidget* parent) :
2290 QDialog(parent) {
2291
2292 QTextBrowser* tb = new QTextBrowser;
2293 QUrl url; url.setPath(":bncabout.html");
2294 tb->setSource(url);
2295 tb->setReadOnly(true);
2296
2297 int ww = QFontMetrics(font()).width('w');
2298 QPushButton* _closeButton = new QPushButton("Close");
2299 _closeButton->setMaximumWidth(10*ww);
2300 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2301
2302 QGridLayout* dlgLayout = new QGridLayout();
2303 QLabel* img = new QLabel();
2304 img->setPixmap(QPixmap(":ntrip-logo.png"));
2305 dlgLayout->addWidget(img, 0,0);
2306 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2307 dlgLayout->addWidget(tb,1,0,1,2);
2308 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2309
2310 setLayout(dlgLayout);
2311 resize(60*ww, 60*ww);
2312 setWindowTitle("About BNC");
2313 show();
2314}
2315
2316//
2317////////////////////////////////////////////////////////////////////////////
2318bncAboutDlg::~bncAboutDlg() {
2319};
2320
2321// Flowchart
2322////////////////////////////////////////////////////////////////////////////
2323bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2324 QDialog(parent) {
2325
2326 int ww = QFontMetrics(font()).width('w');
2327 QPushButton* _closeButton = new QPushButton("Close");
2328 _closeButton->setMaximumWidth(10*ww);
2329 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2330
2331 QGridLayout* dlgLayout = new QGridLayout();
2332 QLabel* img = new QLabel();
2333 img->setPixmap(QPixmap(":bncflowchart.png"));
2334 dlgLayout->addWidget(img, 0,0);
2335 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2336
2337 setLayout(dlgLayout);
2338 setWindowTitle("Flow Chart");
2339 show();
2340}
2341
2342//
2343////////////////////////////////////////////////////////////////////////////
2344bncFlowchartDlg::~bncFlowchartDlg() {
2345};
2346
2347// Enable/Disable Widget (and change its color)
2348////////////////////////////////////////////////////////////////////////////
2349void bncWindow::enableWidget(bool enable, QWidget* widget) {
2350 const static QPalette paletteWhite(QColor(255, 255, 255));
2351 const static QPalette paletteGray(QColor(230, 230, 230));
2352
2353 widget->setEnabled(enable);
2354 if (enable) {
2355 widget->setPalette(paletteWhite);
2356 }
2357 else {
2358 widget->setPalette(paletteGray);
2359 }
2360}
2361
2362// Bnc Text
2363////////////////////////////////////////////////////////////////////////////
2364void bncWindow::slotBncTextChanged(){
2365
2366 bool enable = true;
2367
2368 // Proxy
2369 //------
2370 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2371 enable = !_proxyHostLineEdit->text().isEmpty();
2372 enableWidget(enable, _proxyPortLineEdit);
2373 }
2374
2375 // RINEX Observations
2376 // ------------------
2377 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2378 enable = !_rnxPathLineEdit->text().isEmpty();
2379 enableWidget(enable, _rnxSamplSpinBox);
2380 enableWidget(enable, _rnxSkelLineEdit);
2381 enableWidget(enable, _rnxScrpLineEdit);
2382 enableWidget(enable, _rnxV3CheckBox);
2383 enableWidget(enable, _rnxIntrComboBox);
2384 }
2385
2386 // RINEX Ephemeris
2387 // ---------------
2388 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2389 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2390 enableWidget(enable, _ephIntrComboBox);
2391 enableWidget(enable, _ephV3CheckBox);
2392 }
2393
2394 // Broadcast Corrections
2395 // ---------------------
2396 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2397 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2398 enableWidget(enable, _corrIntrComboBox);
2399 }
2400
2401 // Feed Engine
2402 // -----------
2403 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2404 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2405 enableWidget(enable, _waitTimeSpinBox);
2406 enableWidget(enable, _binSamplSpinBox);
2407 }
2408
2409 // Serial Output
2410 // -------------
2411 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2412 sender() == _serialAutoNMEAComboBox) {
2413 enable = !_serialMountPointLineEdit->text().isEmpty();
2414 enableWidget(enable, _serialPortNameLineEdit);
2415 enableWidget(enable, _serialBaudRateComboBox);
2416 enableWidget(enable, _serialParityComboBox);
2417 enableWidget(enable, _serialDataBitsComboBox);
2418 enableWidget(enable, _serialStopBitsComboBox);
2419 enableWidget(enable, _serialFlowControlComboBox);
2420 enableWidget(enable, _serialAutoNMEAComboBox);
2421
2422 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() != "Auto";
2423 enableWidget(enable2, _serialFileNMEALineEdit);
2424 }
2425
2426 // Outages
2427 // -------
2428 if (sender() == 0 || sender() == _obsRateComboBox) {
2429 enable = !_obsRateComboBox->currentText().isEmpty();
2430 enableWidget(enable, _adviseFailSpinBox);
2431 enableWidget(enable, _adviseRecoSpinBox);
2432 enableWidget(enable, _adviseScriptLineEdit);
2433 }
2434
2435 // Miscellaneous
2436 // -------------
2437 if (sender() == 0 || sender() == _miscMountLineEdit) {
2438 enable = !_miscMountLineEdit->text().isEmpty();
2439 enableWidget(enable, _perfIntrComboBox);
2440 enableWidget(enable, _scanRTCMCheckBox);
2441 }
2442
2443 // Enable/disable Broadcast Ephemerides
2444 // ------------------------------------
2445 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2446 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2447 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2448 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2449 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2450 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2451 _uploadEphPortLineEdit->setEnabled(true);
2452 _uploadEphMountpointLineEdit->setEnabled(true);
2453 _uploadEphPasswordLineEdit->setEnabled(true);
2454 _uploadEphSampleSpinBox->setEnabled(true);
2455 }
2456 else {
2457 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2458 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2459 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2460 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2461 _uploadEphPortLineEdit->setEnabled(false);
2462 _uploadEphMountpointLineEdit->setEnabled(false);
2463 _uploadEphPasswordLineEdit->setEnabled(false);
2464 _uploadEphSampleSpinBox->setEnabled(false);
2465 }
2466 }
2467
2468 // Combine Corrections
2469 // -------------------
2470 if (sender() == 0 || sender() == _cmbTable) {
2471 int iRow = _cmbTable->rowCount();
2472 if (iRow > 0) {
2473 enableWidget(true, _cmbMethodComboBox);
2474 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2475 _cmbMaxresLineEdit->setEnabled(true);
2476 _cmbSamplSpinBox->setEnabled(true);
2477 }
2478 else {
2479 enableWidget(false, _cmbMethodComboBox);
2480 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2481 _cmbMaxresLineEdit->setEnabled(false);
2482 _cmbSamplSpinBox->setEnabled(false);
2483 }
2484 }
2485
2486 // Upload(clk)
2487 // -----------
2488 int iRow = _uploadTable->rowCount();
2489 if (iRow > 0) {
2490 enableWidget(true, _uploadIntrComboBox);
2491 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2492 enableWidget(true, _uploadSamplClkRnxSpinBox);
2493 enableWidget(true, _uploadSamplSp3SpinBox);
2494 }
2495 else {
2496 enableWidget(false, _uploadIntrComboBox);
2497 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2498 enableWidget(false, _uploadSamplClkRnxSpinBox);
2499 enableWidget(false, _uploadSamplSp3SpinBox);
2500 }
2501
2502 // PPP Client
2503 // ----------
2504 if (sender() == 0
2505 || sender() == _pppMountLineEdit
2506 || sender() == _pppCorrMountLineEdit
2507 || sender() == _pppRefCrdXLineEdit
2508 || sender() == _pppRefCrdYLineEdit
2509 || sender() == _pppRefCrdZLineEdit
2510 || sender() == _pppRefdNLineEdit
2511 || sender() == _pppRefdELineEdit
2512 || sender() == _pppRefdULineEdit
2513 || sender() == _pppSync
2514 || sender() == _pppSPPComboBox
2515 || sender() == _pppQuickStartLineEdit
2516 || sender() == _pppEstTropoCheckBox
2517 || sender() == _pppUsePhaseCheckBox
2518 || sender() == _pppAntexFileChooser
2519#ifdef QT_WEBKIT
2520 || sender() == _mapWin
2521#endif
2522 ) {
2523
2524
2525 enable = !_pppSPPComboBox->currentText().isEmpty();
2526 if (enable) {
2527 enable = (!_pppMountLineEdit->text().isEmpty() && !_pppCorrMountLineEdit->text().isEmpty()) ||
2528 (!_pppMountLineEdit->text().isEmpty() && _pppSPPComboBox->currentText() == "Realtime-SPP") ||
2529 (_pppSPPComboBox->currentText() == "Post-Processing");
2530 }
2531
2532 enableWidget(enable, _pppNMEALineEdit);
2533 enableWidget(enable, _pppNMEAPortLineEdit);
2534 enableWidget(enable, _pppRefCrdXLineEdit);
2535 enableWidget(enable, _pppRefCrdYLineEdit);
2536 enableWidget(enable, _pppRefCrdZLineEdit);
2537 enableWidget(enable, _pppRefdNLineEdit);
2538 enableWidget(enable, _pppRefdELineEdit);
2539 enableWidget(enable, _pppRefdULineEdit);
2540 enableWidget(enable, _pppUsePhaseCheckBox);
2541 enableWidget(enable, _pppPlotCoordinates);
2542 enableWidget(enable, _mapWinButton);
2543 enableWidget(enable, _gmRadioButton);
2544 enableWidget(enable, _osmRadioButton);
2545 enableWidget(enable, _mapWinTraceCheckBox);
2546 enableWidget(enable, _pppEstTropoCheckBox);
2547// enableWidget(enable, _pppGLONASSCheckBox);
2548 enableWidget(enable, _pppGalileoCheckBox);
2549// enableWidget(enable, _pppAntexFileChooser);
2550 enableWidget(enable, _pppSigCLineEdit);
2551 enableWidget(enable, _pppSigCrd0);
2552 enableWidget(enable, _pppSigCrdP);
2553
2554 bool enable2 = enable && !_pppRefCrdXLineEdit->text().isEmpty() &&
2555 !_pppRefCrdYLineEdit->text().isEmpty() &&
2556 !_pppRefCrdZLineEdit->text().isEmpty();
2557
2558 enableWidget(enable2, _pppAverageLineEdit);
2559 enableWidget(enable2, _pppQuickStartLineEdit);
2560
2561 bool enable3 = enable2 && !_pppQuickStartLineEdit->text().isEmpty();
2562 enableWidget(enable3, _pppMaxSolGapLineEdit);
2563 enableWidget(enable3, _pppAudioResponseLineEdit);
2564
2565 bool enable4 = enable && !_pppAntexFileChooser->fileName().isEmpty();
2566 enableWidget(enable4, _pppAntennaLineEdit);
2567
2568 bool enable5 = enable && _pppEstTropoCheckBox->isChecked();
2569 enableWidget(enable5, _pppSigTrp0);
2570 enableWidget(enable5, _pppSigTrpP);
2571
2572 bool enable6 = enable && _pppUsePhaseCheckBox->isChecked();
2573 enableWidget(enable6, _pppSigPLineEdit);
2574
2575 bool enable7 = enable && _pppSPPComboBox->currentText() == "Realtime-PPP";
2576 enableWidget(enable7, _pppSync);
2577
2578 bool enable8 = _pppSPPComboBox->currentText() == "Realtime-PPP";
2579 enableWidget(enable8, _pppCorrMountLineEdit);
2580
2581 bool enable9 = _pppSPPComboBox->currentText() == "Post-Processing";
2582 enableWidget(enable9, _postObsFileChooser);
2583 enableWidget(enable9, _postNavFileChooser);
2584 enableWidget(enable9, _postCorrFileChooser);
2585 enableWidget(enable9, _postOutLineEdit);
2586 enableWidget(enable9, _mapSpeedSlider);
2587
2588 bool enable10 = !_pppSPPComboBox->currentText().isEmpty() && !enable9;
2589 enableWidget(enable10, _pppMountLineEdit);
2590 }
2591
2592 if (sender() == 0 || sender() == _reqcActionComboBox) {
2593 enable = !_reqcActionComboBox->currentText().isEmpty();
2594 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2595 enableWidget(enable && enable10, _reqcEditOptionButton);
2596 enableWidget(enable, _reqcObsFileChooser);
2597 enableWidget(enable, _reqcNavFileChooser);
2598 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2599 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2600 enableWidget(enable, _reqcOutLogLineEdit);
2601 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2602 enableWidget(enable && !enable10, _reqcSkyPlotSystems);
2603 }
2604
2605 enableStartStop();
2606}
2607
2608//
2609////////////////////////////////////////////////////////////////////////////
2610void bncWindow::slotAddCmbRow() {
2611 int iRow = _cmbTable->rowCount();
2612 _cmbTable->insertRow(iRow);
2613 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2614 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2615 }
2616}
2617
2618//
2619////////////////////////////////////////////////////////////////////////////
2620void bncWindow::slotDelCmbRow() {
2621 int nRows = _cmbTable->rowCount();
2622 bool flg[nRows];
2623 for (int iRow = 0; iRow < nRows; iRow++) {
2624 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2625 flg[iRow] = true;
2626 }
2627 else {
2628 flg[iRow] = false;
2629 }
2630 }
2631 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2632 if (flg[iRow]) {
2633 _cmbTable->removeRow(iRow);
2634 }
2635 }
2636 nRows = _cmbTable->rowCount();
2637 if (nRows < 1) {
2638 enableWidget(false, _cmbMethodComboBox);
2639 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2640 _cmbMaxresLineEdit->setEnabled(false);
2641 _cmbSamplSpinBox->setEnabled(false);
2642 }
2643}
2644
2645//
2646////////////////////////////////////////////////////////////////////////////
2647void bncWindow::populateCmbTable() {
2648
2649 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2650 _cmbTable->removeRow(iRow);
2651 }
2652
2653 bncSettings settings;
2654
2655 int iRow = -1;
2656 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2657 while (it.hasNext()) {
2658 QStringList hlp = it.next().split(" ");
2659 if (hlp.size() > 2) {
2660 ++iRow;
2661 _cmbTable->insertRow(iRow);
2662 }
2663 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2664 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2665 }
2666 }
2667}
2668
2669//
2670////////////////////////////////////////////////////////////////////////////
2671void bncWindow::slotAddUploadRow() {
2672 int iRow = _uploadTable->rowCount();
2673 _uploadTable->insertRow(iRow);
2674 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2675 if (iCol == 3) {
2676 QLineEdit* passwd = new QLineEdit();
2677 passwd->setFrame(false);
2678 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2679 _uploadTable->setCellWidget(iRow, iCol, passwd);
2680 }
2681 else if (iCol == 4) {
2682 QComboBox* system = new QComboBox();
2683 system->setEditable(false);
2684 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2685 system->setFrame(false);
2686 _uploadTable->setCellWidget(iRow, iCol, system);
2687 }
2688 else if (iCol == 5) {
2689 QCheckBox* com = new QCheckBox();
2690 _uploadTable->setCellWidget(iRow, iCol, com);
2691 }
2692 else if (iCol == 11) {
2693 bncTableItem* bncIt = new bncTableItem();
2694 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2695 _uploadTable->setItem(iRow, iCol, bncIt);
2696 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2697 }
2698 else {
2699 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2700 }
2701 }
2702}
2703
2704//
2705////////////////////////////////////////////////////////////////////////////
2706void bncWindow::slotDelUploadRow() {
2707 BNC_CORE->_uploadTableItems.clear();
2708 int nRows = _uploadTable->rowCount();
2709 bool flg[nRows];
2710 for (int iRow = 0; iRow < nRows; iRow++) {
2711 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2712 flg[iRow] = true;
2713 }
2714 else {
2715 flg[iRow] = false;
2716 }
2717 }
2718 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2719 if (flg[iRow]) {
2720 _uploadTable->removeRow(iRow);
2721 }
2722 }
2723 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2724 BNC_CORE->_uploadTableItems[iRow] =
2725 (bncTableItem*) _uploadTable->item(iRow, 11);
2726 }
2727 nRows = _uploadTable->rowCount();
2728 if (nRows < 1) {
2729 enableWidget(false, _uploadIntrComboBox);
2730 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2731 enableWidget(false, _uploadSamplSp3SpinBox);
2732 enableWidget(false, _uploadSamplClkRnxSpinBox);
2733 }
2734}
2735
2736//
2737////////////////////////////////////////////////////////////////////////////
2738void bncWindow::populateUploadTable() {
2739 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2740 _uploadTable->removeRow(iRow);
2741 }
2742
2743 bncSettings settings;
2744
2745 int iRow = -1;
2746 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2747 while (it.hasNext()) {
2748 QStringList hlp = it.next().split(",");
2749 if (hlp.size() > 6) {
2750 ++iRow;
2751 _uploadTable->insertRow(iRow);
2752 }
2753 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2754 if (iCol == 3) {
2755 QLineEdit* passwd = new QLineEdit();
2756 passwd->setFrame(false);
2757 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2758 passwd->setText(hlp[iCol]);
2759 _uploadTable->setCellWidget(iRow, iCol, passwd);
2760 }
2761 else if (iCol == 4) {
2762 QComboBox* system = new QComboBox();
2763 system->setEditable(false);
2764 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2765 system->setFrame(false);
2766 system->setCurrentIndex(system->findText(hlp[iCol]));
2767 _uploadTable->setCellWidget(iRow, iCol, system);
2768 }
2769 else if (iCol == 5) {
2770 QCheckBox* com = new QCheckBox();
2771 if (hlp[iCol].toInt() == Qt::Checked) {
2772 com->setCheckState(Qt::Checked);
2773 }
2774 _uploadTable->setCellWidget(iRow, iCol, com);
2775 }
2776 else if (iCol == 11) {
2777 bncTableItem* bncIt = new bncTableItem();
2778 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2779 _uploadTable->setItem(iRow, iCol, bncIt);
2780 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2781 }
2782 else {
2783 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2784 }
2785 }
2786 }
2787}
2788
2789//
2790////////////////////////////////////////////////////////////////////////////
2791void bncWindow::slotSetUploadTrafo() {
2792 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2793 dlg->exec();
2794 delete dlg;
2795}
2796
2797// Start Post-Processing PPP
2798////////////////////////////////////////////////////////////////////////////
2799void bncWindow::startPostProcessingPPP() {
2800#ifdef USE_POSTPROCESSING
2801 _runningPostProcessingPPP = true;
2802 _actStart->setText("0 Epochs");
2803 enableStartStop();
2804
2805 _postProcessing = new t_postProcessing(this, _mapSpeedSlider->maximum(), _mapSpeedSlider->value());
2806 connect(_postProcessing, SIGNAL(finished()), this, SLOT(slotFinishedPostProcessingPPP()));
2807 connect(_postProcessing, SIGNAL(progress(int)), this, SLOT(slotPostProgress(int)));
2808 connect(_mapSpeedSlider, SIGNAL(valueChanged(int)), _postProcessing, SLOT(slotSetSpeed(int)));
2809 bncSettings settings;
2810 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2811 _bncFigurePPP->reset();
2812 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2813 _bncFigurePPP, SLOT(slotNewPosition(bncTime, double, double, double)));
2814 }
2815#ifdef QT_WEBKIT
2816 if (_mapWin) {
2817 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2818 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2819 }
2820#endif
2821
2822 _postProcessing->start();
2823#else
2824 QMessageBox::information(this, "Information",
2825 "Post-Processing Not Permitted");
2826#endif
2827}
2828
2829// Post-Processing PPP Finished
2830////////////////////////////////////////////////////////////////////////////
2831void bncWindow::slotFinishedPostProcessingPPP() {
2832#ifdef QT_WEBKIT
2833 if (_mapWin) {
2834 _postProcessing->disconnect(_mapWin);
2835 }
2836#endif
2837 _runningPostProcessingPPP = false;
2838 delete _postProcessing;
2839 _postProcessing = 0;
2840 QMessageBox::information(this, "Information",
2841 "Post-Processing Thread Finished");
2842 _actStart->setText("Start");
2843 enableStartStop();
2844}
2845
2846// Progress Bar Change
2847////////////////////////////////////////////////////////////////////////////
2848void bncWindow::slotPostProgress(int nEpo) {
2849 if (_actStart) {
2850 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2851 }
2852}
2853
2854// Start Post-Processing Reqc
2855////////////////////////////////////////////////////////////////////////////
2856void bncWindow::startPostProcessingReqc() {
2857#ifdef USE_POSTPROCESSING
2858 _runningPostProcessingReqc = true;
2859 enableStartStop();
2860 if (_reqcActionComboBox->currentText() == "Analyze") {
2861 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2862 connect(reqcAnalyze, SIGNAL(finished()),
2863 this, SLOT(slotFinishedPostProcessingReqc()));
2864 reqcAnalyze->start();
2865 }
2866 else {
2867 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2868 connect(reqcEdit, SIGNAL(finished()),
2869 this, SLOT(slotFinishedPostProcessingReqc()));
2870 reqcEdit->start();
2871 }
2872#else
2873 QMessageBox::information(this, "Information",
2874 "Post-Processing Not Permitted");
2875#endif
2876}
2877
2878// Post-Processing Reqc Finished
2879////////////////////////////////////////////////////////////////////////////
2880void bncWindow::slotFinishedPostProcessingReqc() {
2881 _runningPostProcessingReqc = false;
2882 if (_reqcActionComboBox->currentText() != "Analyze") {
2883 QMessageBox::information(this, "Information",
2884 "RINEX Processing Thread Finished");
2885 }
2886 enableStartStop();
2887}
2888
2889// Edit teqc-like editing options
2890////////////////////////////////////////////////////////////////////////////
2891void bncWindow::slotReqcEditOption() {
2892 reqcDlg* dlg = new reqcDlg(this);
2893 dlg->move(this->pos().x()+50, this->pos().y()+50);
2894 dlg->exec();
2895 delete dlg;
2896}
2897
2898// Enable/Disable Start and Stop Buttons
2899////////////////////////////////////////////////////////////////////////////
2900void bncWindow::enableStartStop() {
2901
2902 if ( _pppSPPComboBox && _pppSPPComboBox->currentText() == "Post-Processing" ) {
2903 if (_runningPostProcessingPPP) {
2904 _actStart->setEnabled(false);
2905 }
2906 else {
2907 _actStart->setEnabled(true);
2908 }
2909 _actStop->setEnabled(false);
2910 }
2911 else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
2912 if (_runningPostProcessingReqc) {
2913 _actStart->setEnabled(false);
2914 }
2915 else {
2916 _actStart->setEnabled(true);
2917 }
2918 _actStop->setEnabled(false);
2919 }
2920 else {
2921 if (_runningRealTime) {
2922 _actStart->setEnabled(false);
2923 _actStop->setEnabled(true);
2924 }
2925 else {
2926 _actStop->setEnabled(false);
2927 if (_mountPointsTable->rowCount() == 0) {
2928 _actStart->setEnabled(false);
2929 }
2930 else {
2931 _actStart->setEnabled(true);
2932 }
2933 }
2934 }
2935}
2936
2937// Show Map
2938////////////////////////////////////////////////////////////////////////////
2939void bncWindow::slotMapMountPoints() {
2940 saveOptions();
2941 t_bncMap* bncMap = new t_bncMap(this);
2942 bncMap->setMinimumSize(800, 600);
2943 bncMap->setWindowTitle("Selected Mountpoints");
2944
2945 bncSettings settings;
2946 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2947 while (it.hasNext()) {
2948 QStringList hlp = it.next().split(" ");
2949 if (hlp.size() < 5) continue;
2950 QUrl url(hlp[0]);
2951 double latDeg = hlp[2].toDouble();
2952 double lonDeg = hlp[3].toDouble();
2953 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2954 }
2955
2956 bncMap->show();
2957}
2958
2959// Show Map
2960////////////////////////////////////////////////////////////////////////////
2961void bncWindow::slotMapPPP() {
2962#ifdef QT_WEBKIT
2963 saveOptions();
2964 enableWidget(false, _mapWinButton);
2965 enableWidget(false, _gmRadioButton);
2966 enableWidget(false, _osmRadioButton);
2967 enableWidget(false, _mapWinTraceCheckBox);
2968 if (!_mapWin) {
2969 _mapWin = new bncMapWin(this);
2970 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2971 QListIterator<bncGetThread*> it(_threads);
2972 while (it.hasNext()) {
2973 bncGetThread* thread = it.next();
2974 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2975 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2976 }
2977 if (_postProcessing) {
2978 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2979 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2980 }
2981 }
2982 _mapWin->show();
2983#else
2984 QMessageBox::information(this, "Information",
2985 "Qt Library compiled without QtWebKit");
2986#endif
2987}
2988
2989// Show Map
2990////////////////////////////////////////////////////////////////////////////
2991void bncWindow::slotMapPPPClosed() {
2992#ifdef QT_WEBKIT
2993 slotBncTextChanged();
2994 if (_mapWin) {
2995 QListIterator<bncGetThread*> it(_threads);
2996 while (it.hasNext()) {
2997 bncGetThread* thread = it.next();
2998 thread->disconnect(_mapWin);
2999 }
3000 if (_postProcessing) {
3001 _postProcessing->disconnect(_mapWin);
3002 }
3003 _mapWin->deleteLater();
3004 _mapWin = 0;
3005 }
3006#endif
3007}
Note: See TracBrowser for help on using the repository browser.