source: ntrip/trunk/BNC/src/bncwindow.cpp@ 5265

Last change on this file since 5265 was 5265, checked in by mervart, 9 years ago
File size: 154.0 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#ifdef QT_WEBKIT
67# include "map/bncmapwin.h"
68#endif
69#ifdef USE_POSTPROCESSING
70# include "rinex/bncpostprocess.h"
71# include "rinex/reqcedit.h"
72# include "rinex/reqcanalyze.h"
73#endif
74
75using namespace std;
76
77#ifdef GNSSCENTER_PLUGIN
78Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
79#endif
80
81// Constructor
82////////////////////////////////////////////////////////////////////////////
83bncWindow::bncWindow() {
84
85#ifdef GNSSCENTER_PLUGIN
86 BNC_CORE->setConfFileName("");
87#endif
88
89 _caster = 0;
90 _casterEph = 0;
91
92 _bncFigure = new bncFigure(this);
93 _bncFigureLate = new bncFigureLate(this);
94 _bncFigurePPP = new bncFigurePPP(this);
95 _runningRealTime = false;
96 _runningPostProcessingPPP = false;
97 _runningPostProcessingReqc = false;
98 _postProcessing = 0;
99
100 _pppSPPComboBox = 0; // necessary for enableStartStop()
101 _reqcActionComboBox = 0; // necessary for enableStartStop()
102
103 _mapWin = 0;
104
105 int ww = QFontMetrics(this->font()).width('w');
106
107 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
108
109 setMinimumSize(85*ww, 65*ww);
110
111 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
112
113 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
114 this, SLOT(slotWindowMessage(QByteArray,bool)));
115
116 // Create Actions
117 // --------------
118 _actHelp = new QAction(tr("&Help Contents"),this);
119 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
120
121 _actAbout = new QAction(tr("&About BNC"),this);
122 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
123
124 _actFlowchart = new QAction(tr("&Flow Chart"),this);
125 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
126
127 _actFontSel = new QAction(tr("Select &Font"),this);
128 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
129
130 _actSaveOpt = new QAction(tr("&Save && Reread Configuration"),this);
131 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
132
133 _actQuit = new QAction(tr("&Quit"),this);
134 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
135
136 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
137 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
138
139 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
140 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
141 _actDeleteMountPoints->setEnabled(false);
142
143 _actMapMountPoints = new QAction(tr("Streams &Map"),this);
144 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
145
146 _actStart = new QAction(tr("Sta&rt"),this);
147 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
148
149 _actStop = new QAction(tr("Sto&p"),this);
150 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
151
152 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
153 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
154
155 CreateMenu();
156 AddToolbar();
157
158 bncSettings settings;
159
160 // Network Options
161 // ---------------
162 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
163 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
164
165 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
166 this, SLOT(slotBncTextChanged()));
167
168 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
169 _ignoreSslErrorsCheckBox = new QCheckBox();
170 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
171 settings.value("ignoreSslErrors").toInt()));
172
173 // General Options
174 // ---------------
175 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
176 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
177 _rnxAppendCheckBox = new QCheckBox();
178 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
179 settings.value("rnxAppend").toInt()));
180 _onTheFlyComboBox = new QComboBox();
181 _onTheFlyComboBox->setEditable(false);
182 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
183 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
184 if (ii != -1) {
185 _onTheFlyComboBox->setCurrentIndex(ii);
186 }
187 _autoStartCheckBox = new QCheckBox();
188 _autoStartCheckBox->setCheckState(Qt::CheckState(
189 settings.value("autoStart").toInt()));
190
191 // RINEX Observations Options
192 // --------------------------
193 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
194 _rnxIntrComboBox = new QComboBox();
195 _rnxIntrComboBox->setEditable(false);
196 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
197 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
198 if (ii != -1) {
199 _rnxIntrComboBox->setCurrentIndex(ii);
200 }
201 _rnxSamplSpinBox = new QSpinBox();
202 _rnxSamplSpinBox->setMinimum(0);
203 _rnxSamplSpinBox->setMaximum(60);
204 _rnxSamplSpinBox->setSingleStep(5);
205 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
206 _rnxSamplSpinBox->setSuffix(" sec");
207 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
208 _rnxSkelLineEdit->setMaximumWidth(5*ww);
209 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
210 _rnxV3CheckBox = new QCheckBox();
211 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
212
213 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
214 this, SLOT(slotBncTextChanged()));
215
216 // RINEX Ephemeris Options
217 // -----------------------
218 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
219 _ephIntrComboBox = new QComboBox();
220 _ephIntrComboBox->setEditable(false);
221 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
222 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
223 if (jj != -1) {
224 _ephIntrComboBox->setCurrentIndex(jj);
225 }
226 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
227 _ephV3CheckBox = new QCheckBox();
228 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
229
230 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
231 this, SLOT(slotBncTextChanged()));
232
233 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
234 this, SLOT(slotBncTextChanged()));
235
236 // Broadcast Corrections Options
237 // -----------------------------
238 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
239 _corrIntrComboBox = new QComboBox();
240 _corrIntrComboBox->setEditable(false);
241 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
242 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
243 if (mm != -1) {
244 _corrIntrComboBox->setCurrentIndex(mm);
245 }
246 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
247 _corrTimeSpinBox = new QSpinBox();
248 _corrTimeSpinBox->setMinimum(0);
249 _corrTimeSpinBox->setMaximum(60);
250 _corrTimeSpinBox->setSingleStep(1);
251 _corrTimeSpinBox->setSuffix(" sec");
252 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
253
254 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
255 this, SLOT(slotBncTextChanged()));
256
257 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
258 this, SLOT(slotBncTextChanged()));
259
260 // Feed Engine Options
261 // -------------------
262 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
263 _waitTimeSpinBox = new QSpinBox();
264 _waitTimeSpinBox->setMinimum(1);
265 _waitTimeSpinBox->setMaximum(30);
266 _waitTimeSpinBox->setSingleStep(1);
267 _waitTimeSpinBox->setSuffix(" sec");
268 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
269 _binSamplSpinBox = new QSpinBox();
270 _binSamplSpinBox->setMinimum(0);
271 _binSamplSpinBox->setMaximum(60);
272 _binSamplSpinBox->setSingleStep(5);
273 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
274 _binSamplSpinBox->setSuffix(" sec");
275 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
276 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
277
278 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
279 this, SLOT(slotBncTextChanged()));
280
281 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
282 this, SLOT(slotBncTextChanged()));
283
284 // Serial Output Options
285 // ---------------------
286 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
287 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
288 _serialBaudRateComboBox = new QComboBox();
289 _serialBaudRateComboBox->addItems(QString("110,300,600,"
290 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
291 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
292 if (kk != -1) {
293 _serialBaudRateComboBox->setCurrentIndex(kk);
294 }
295 _serialFlowControlComboBox = new QComboBox();
296 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
297 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
298 if (kk != -1) {
299 _serialFlowControlComboBox->setCurrentIndex(kk);
300 }
301 _serialDataBitsComboBox = new QComboBox();
302 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
303 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
304 if (kk != -1) {
305 _serialDataBitsComboBox->setCurrentIndex(kk);
306 }
307 _serialParityComboBox = new QComboBox();
308 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
309 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
310 if (kk != -1) {
311 _serialParityComboBox->setCurrentIndex(kk);
312 }
313 _serialStopBitsComboBox = new QComboBox();
314 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
315 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
316 if (kk != -1) {
317 _serialStopBitsComboBox->setCurrentIndex(kk);
318 }
319 _serialAutoNMEAComboBox = new QComboBox();
320 _serialAutoNMEAComboBox->addItems(QString("Auto,Manual").split(","));
321 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
322 if (kk != -1) {
323 _serialAutoNMEAComboBox->setCurrentIndex(kk);
324 }
325 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
326 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
327
328 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
329 this, SLOT(slotBncTextChanged()));
330
331 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
332 this, SLOT(slotBncTextChanged()));
333
334 // Outages Options
335 // ---------------
336 _obsRateComboBox = new QComboBox();
337 _obsRateComboBox->setEditable(false);
338 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
339 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
340 if (kk != -1) {
341 _obsRateComboBox->setCurrentIndex(kk);
342 }
343 _adviseFailSpinBox = new QSpinBox();
344 _adviseFailSpinBox->setMinimum(0);
345 _adviseFailSpinBox->setMaximum(60);
346 _adviseFailSpinBox->setSingleStep(1);
347 _adviseFailSpinBox->setSuffix(" min");
348 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
349 _adviseRecoSpinBox = new QSpinBox();
350 _adviseRecoSpinBox->setMinimum(0);
351 _adviseRecoSpinBox->setMaximum(60);
352 _adviseRecoSpinBox->setSingleStep(1);
353 _adviseRecoSpinBox->setSuffix(" min");
354 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
355 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
356
357 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
358 this, SLOT(slotBncTextChanged()));
359
360 // Miscellaneous Options
361 // ---------------------
362 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
363 _perfIntrComboBox = new QComboBox();
364 _perfIntrComboBox->setEditable(false);
365 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
366 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
367 if (ll != -1) {
368 _perfIntrComboBox->setCurrentIndex(ll);
369 }
370 _scanRTCMCheckBox = new QCheckBox();
371 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
372 settings.value("scanRTCM").toInt()));
373
374 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
375 this, SLOT(slotBncTextChanged()));
376
377 // PPP Options
378 // -----------
379 _pppMountLineEdit = new QLineEdit(settings.value("pppMount").toString());
380 _pppMountLineEdit->setMaximumWidth(8*ww);
381 _pppCorrMountLineEdit = new QLineEdit(settings.value("pppCorrMount").toString());
382 _pppMountLineEdit->setMinimumWidth(8*ww);
383 _pppCorrMountLineEdit->setMinimumWidth(8*ww);
384 _pppCorrMountLineEdit->setMaximumWidth(8*ww);
385 _pppNMEALineEdit = new QLineEdit(settings.value("nmeaFile").toString());
386 _pppNMEALineEdit->setMinimumWidth(15*ww);
387 _pppNMEAPortLineEdit = new QLineEdit(settings.value("nmeaPort").toString());
388 _pppNMEAPortLineEdit->setMaximumWidth(8*ww);
389 _pppNMEAPortLineEdit->setMinimumWidth(8*ww);
390 _pppSigCLineEdit = new QLineEdit(settings.value("pppSigmaCode").toString());
391 _pppSigPLineEdit = new QLineEdit(settings.value("pppSigmaPhase").toString());
392 _pppSigCrd0 = new QLineEdit(settings.value("pppSigCrd0").toString());
393 _pppSigCrdP = new QLineEdit(settings.value("pppSigCrdP").toString());
394 _pppSigTrp0 = new QLineEdit(settings.value("pppSigTrp0").toString());
395 _pppSigTrpP = new QLineEdit(settings.value("pppSigTrpP").toString());
396 _pppAverageLineEdit = new QLineEdit(settings.value("pppAverage").toString());
397 _pppQuickStartLineEdit = new QLineEdit(settings.value("pppQuickStart").toString());
398 _pppMaxSolGapLineEdit = new QLineEdit(settings.value("pppMaxSolGap").toString());
399 _pppAudioResponseLineEdit = new QLineEdit(settings.value("pppAudioResponse").toString());
400 _pppRefCrdXLineEdit = new QLineEdit(settings.value("pppRefCrdX").toString());
401 _pppRefCrdYLineEdit = new QLineEdit(settings.value("pppRefCrdY").toString());
402 _pppRefCrdZLineEdit = new QLineEdit(settings.value("pppRefCrdZ").toString());
403 _pppRefdNLineEdit = new QLineEdit(settings.value("pppRefdN").toString());
404 _pppRefdELineEdit = new QLineEdit(settings.value("pppRefdE").toString());
405 _pppRefdULineEdit = new QLineEdit(settings.value("pppRefdU").toString());
406 _pppSync = new QLineEdit(settings.value("pppSync").toString());
407 _pppAntexFileChooser = new qtFileChooser;
408 _pppAntexFileChooser->setMinimumWidth(12*ww);
409 _pppAntennaLineEdit = new QLineEdit(settings.value("pppAntenna").toString());
410 _pppAntexFileChooser->setFileName(settings.value("pppAntex").toString());
411
412 _pppSPPComboBox = new QComboBox();
413 _pppSPPComboBox->setEditable(false);
414 _pppSPPComboBox->addItems(QString(",Realtime-PPP,Realtime-SPP,Post-Processing").split(","));
415 int ik = _pppSPPComboBox->findText(settings.value("pppSPP").toString());
416 if (ik != -1) {
417 _pppSPPComboBox->setCurrentIndex(ik);
418 }
419 _pppUsePhaseCheckBox = new QCheckBox();
420 _pppUsePhaseCheckBox->setCheckState(Qt::CheckState(
421 settings.value("pppUsePhase").toInt()));
422 _pppEstTropoCheckBox = new QCheckBox();
423 _pppEstTropoCheckBox->setCheckState(Qt::CheckState(
424 settings.value("pppEstTropo").toInt()));
425 _pppGLONASSCheckBox = new QCheckBox();
426 _pppGLONASSCheckBox->setCheckState(Qt::CheckState(
427 settings.value("pppGLONASS").toInt()));
428 _pppGalileoCheckBox = new QCheckBox();
429 _pppGalileoCheckBox->setCheckState(Qt::CheckState(
430 settings.value("pppGalileo").toInt()));
431
432 connect(_pppMountLineEdit, SIGNAL(textChanged(const QString &)),
433 this, SLOT(slotBncTextChanged()));
434
435 connect(_pppCorrMountLineEdit, SIGNAL(textChanged(const QString &)),
436 this, SLOT(slotBncTextChanged()));
437
438 connect(_pppUsePhaseCheckBox, SIGNAL(stateChanged(int)),
439 this, SLOT(slotBncTextChanged()));
440
441 connect(_pppRefCrdXLineEdit, SIGNAL(textChanged(const QString &)),
442 this, SLOT(slotBncTextChanged()));
443 connect(_pppRefCrdYLineEdit, SIGNAL(textChanged(const QString &)),
444 this, SLOT(slotBncTextChanged()));
445 connect(_pppRefCrdZLineEdit, SIGNAL(textChanged(const QString &)),
446 this, SLOT(slotBncTextChanged()));
447 connect(_pppRefdNLineEdit, SIGNAL(textChanged(const QString &)),
448 this, SLOT(slotBncTextChanged()));
449 connect(_pppRefdELineEdit, SIGNAL(textChanged(const QString &)),
450 this, SLOT(slotBncTextChanged()));
451 connect(_pppRefdULineEdit, SIGNAL(textChanged(const QString &)),
452 this, SLOT(slotBncTextChanged()));
453
454 connect(_pppEstTropoCheckBox, SIGNAL(stateChanged(int)),
455 this, SLOT(slotBncTextChanged()));
456
457 connect(_pppSync, SIGNAL(textChanged(const QString &)),
458 this, SLOT(slotBncTextChanged()));
459
460 connect(_pppSPPComboBox, SIGNAL(currentIndexChanged(const QString &)),
461 this, SLOT(slotBncTextChanged()));
462
463 connect(_pppAntexFileChooser, SIGNAL(fileNameChanged(const QString &)),
464 this, SLOT(slotBncTextChanged()));
465
466 connect(_pppQuickStartLineEdit, SIGNAL(textChanged(const QString &)),
467 this, SLOT(slotBncTextChanged()));
468
469 // Streams
470 // -------
471 _mountPointsTable = new QTableWidget(0,8);
472
473 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
474 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
475 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
476 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
477 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
478 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
479 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
480 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
481 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
482_mountPointsTable->setHorizontalHeaderLabels(labels);
483 _mountPointsTable->setGridStyle(Qt::NoPen);
484 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
485 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
486 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
487 _mountPointsTable->hideColumn(0);
488 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
489 SLOT(slotSelectionChanged()));
490 populateMountPointsTable();
491
492 _log = new QTextBrowser();
493 _log->setReadOnly(true);
494
495 // Combine Corrections
496 // -------------------
497 _cmbTable = new QTableWidget(0,3);
498 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
499 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
500 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
501 _cmbTable->setMaximumWidth(30*ww);
502 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
503 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
504 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
505 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
506 _cmbTable->horizontalHeader()->setStretchLastSection(true);
507 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
508
509 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
510
511 _cmbSamplSpinBox = new QSpinBox;
512 _cmbSamplSpinBox->setMinimum(10);
513 _cmbSamplSpinBox->setMaximum(60);
514 _cmbSamplSpinBox->setSingleStep(10);
515 _cmbSamplSpinBox->setMaximumWidth(9*ww);
516 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
517 _cmbSamplSpinBox->setSuffix(" sec");
518
519 QPushButton* addCmbRowButton = new QPushButton("Add Row");
520 QPushButton* delCmbRowButton = new QPushButton("Delete");
521
522 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
523 SLOT(slotBncTextChanged()));
524
525 _cmbMethodComboBox = new QComboBox();
526 _cmbMethodComboBox->setEditable(false);
527 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
528 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
529 if (im != -1) {
530 _cmbMethodComboBox->setCurrentIndex(im);
531 }
532
533 int iRow = _cmbTable->rowCount();
534 if (iRow > 0) {
535 enableWidget(true, _cmbMethodComboBox);
536 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
537 _cmbMaxresLineEdit->setEnabled(true);
538 _cmbSamplSpinBox->setEnabled(true);
539 }
540 else {
541 enableWidget(false, _cmbMethodComboBox);
542 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
543 _cmbMaxresLineEdit->setEnabled(false);
544 _cmbSamplSpinBox->setEnabled(false);
545 }
546
547 // Upload Results
548 // -------------
549 _uploadTable = new QTableWidget(0,12);
550 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
551 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
552 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
553 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
554 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
555 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
556 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
557 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
558 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
559 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
560 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
561 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
562 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
563 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
564 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
565 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
566 _uploadTable->horizontalHeader()->setStretchLastSection(true);
567 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
568
569 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
570 SLOT(slotBncTextChanged()));
571
572 QPushButton* addUploadRowButton = new QPushButton("Add Row");
573 QPushButton* delUploadRowButton = new QPushButton("Del Row");
574 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
575 _uploadIntrComboBox = new QComboBox;
576 _uploadIntrComboBox->setEditable(false);
577 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
578 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
579 if (ii != -1) {
580 _uploadIntrComboBox->setCurrentIndex(ii);
581 }
582
583 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
584 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
585 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
586 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
587 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
588 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
589 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
590
591 _uploadSamplSp3SpinBox = new QSpinBox;
592 _uploadSamplSp3SpinBox->setMinimum(0);
593 _uploadSamplSp3SpinBox->setMaximum(15);
594 _uploadSamplSp3SpinBox->setSingleStep(1);
595 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
596 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
597 _uploadSamplSp3SpinBox->setSuffix(" min");
598
599 _uploadSamplClkRnxSpinBox = new QSpinBox;
600 _uploadSamplClkRnxSpinBox->setMinimum(0);
601 _uploadSamplClkRnxSpinBox->setMaximum(60);
602 _uploadSamplClkRnxSpinBox->setSingleStep(5);
603 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
604 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
605 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
606
607 int iRowT = _uploadTable->rowCount();
608 if (iRowT > 0) {
609 enableWidget(true, _uploadIntrComboBox);
610 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
611 enableWidget(true, _uploadSamplSp3SpinBox);
612 enableWidget(true, _uploadSamplClkRnxSpinBox);
613 }
614 else {
615 enableWidget(false, _uploadIntrComboBox);
616 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
617 enableWidget(false, _uploadSamplSp3SpinBox);
618 enableWidget(false, _uploadSamplClkRnxSpinBox);
619 }
620
621 // Upload RTCM3 Ephemeris
622 // ----------------------
623 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
624 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
625 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
626 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
627 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
628 _uploadEphSampleSpinBox = new QSpinBox;
629 _uploadEphSampleSpinBox->setMinimum(5);
630 _uploadEphSampleSpinBox->setMaximum(60);
631 _uploadEphSampleSpinBox->setSingleStep(5);
632 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
633 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
634 _uploadEphSampleSpinBox->setSuffix(" sec");
635 _uploadEphBytesCounter = new bncBytesCounter;
636
637 // Canvas with Editable Fields
638 // ---------------------------
639 _canvas = new QWidget;
640 setCentralWidget(_canvas);
641
642 _aogroup = new QTabWidget();
643 QWidget* pgroup = new QWidget();
644 QWidget* ggroup = new QWidget();
645 QWidget* sgroup = new QWidget();
646 QWidget* egroup = new QWidget();
647 QWidget* agroup = new QWidget();
648 QWidget* cgroup = new QWidget();
649 QWidget* ogroup = new QWidget();
650 QWidget* rgroup = new QWidget();
651 QWidget* sergroup = new QWidget();
652 QWidget* pppgroup = new QWidget();
653 QWidget* ppp2group = new QWidget();
654 QWidget* ppp3group = new QWidget();
655 QWidget* reqcgroup = new QWidget();
656 QWidget* cmbgroup = new QWidget();
657 QWidget* uploadgroup = new QWidget();
658 QWidget* uploadEphgroup = new QWidget();
659 _aogroup->addTab(pgroup,tr("Network"));
660 _aogroup->addTab(ggroup,tr("General"));
661 _aogroup->addTab(ogroup,tr("RINEX Observations"));
662 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
663 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
664 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
665 _aogroup->addTab(sgroup,tr("Feed Engine"));
666 _aogroup->addTab(sergroup,tr("Serial Output"));
667 _aogroup->addTab(agroup,tr("Outages"));
668 _aogroup->addTab(rgroup,tr("Miscellaneous"));
669 _aogroup->addTab(pppgroup,tr("PPP (1)"));
670 _aogroup->addTab(ppp2group,tr("PPP (2)"));
671 _aogroup->addTab(ppp3group,tr("PPP (3)"));
672#ifdef USE_COMBINATION
673 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
674#endif
675 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
676 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
677
678 // Log Tab
679 // -------
680 _loggroup = new QTabWidget();
681 _loggroup->addTab(_log,tr("Log"));
682 _loggroup->addTab(_bncFigure,tr("Throughput"));
683 _loggroup->addTab(_bncFigureLate,tr("Latency"));
684 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
685
686 // Netowork (Proxy and SSL) Tab
687 // ----------------------------
688 QGridLayout* pLayout = new QGridLayout;
689 pLayout->setColumnMinimumWidth(0,13*ww);
690 _proxyPortLineEdit->setMaximumWidth(9*ww);
691
692 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none."),0, 0, 1, 50);
693 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
694 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
695 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
696 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
697 pLayout->addWidget(new QLabel("Path to SSL Certificates"), 3, 0);
698 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
699 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
700 pLayout->addWidget(new QLabel("Ignore SSL Authorization Errors"), 4, 0);
701 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
702 pLayout->addWidget(new QLabel(" "), 4, 0);
703 pLayout->addWidget(new QLabel(" "), 5, 0);
704 pLayout->addWidget(new QLabel(" "), 6, 0);
705 pgroup->setLayout(pLayout);
706
707 // General Tab
708 // -----------
709 QGridLayout* gLayout = new QGridLayout;
710 gLayout->setColumnMinimumWidth(0,14*ww);
711 _onTheFlyComboBox->setMaximumWidth(9*ww);
712
713 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),0, 0, 1, 50);
714 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
715 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,30);
716 gLayout->addWidget(new QLabel("Append files"), 2, 0);
717 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
718 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
719 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
720 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
721 gLayout->addWidget(_autoStartCheckBox, 4, 1);
722 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
723 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,30);
724 gLayout->addWidget(new QLabel(" "), 6, 0);
725 ggroup->setLayout(gLayout);
726
727 // RINEX Observations
728 // ------------------
729 QGridLayout* oLayout = new QGridLayout;
730 oLayout->setColumnMinimumWidth(0,14*ww);
731 _rnxIntrComboBox->setMaximumWidth(9*ww);
732 _rnxSamplSpinBox->setMaximumWidth(9*ww);
733
734 oLayout->addWidget(new QLabel("Saving RINEX observation files."),0, 0, 1,50);
735 oLayout->addWidget(new QLabel("Directory"), 1, 0);
736 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1,24);
737 oLayout->addWidget(new QLabel("Interval"), 2, 0);
738 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
739 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
740 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
741 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
742 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, 1, 1, Qt::AlignLeft);
743 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
744 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1,24);
745 oLayout->addWidget(new QLabel("Version 3"), 5, 0);
746 oLayout->addWidget(_rnxV3CheckBox, 5, 1);
747 oLayout->addWidget(new QLabel(" "), 6, 0);
748 ogroup->setLayout(oLayout);
749
750 // RINEX Ephemeris
751 // ---------------
752 QGridLayout* eLayout = new QGridLayout;
753 eLayout->setColumnMinimumWidth(0,14*ww);
754 _ephIntrComboBox->setMaximumWidth(9*ww);
755 _outEphPortLineEdit->setMaximumWidth(9*ww);
756
757 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),0,0,1,50);
758 eLayout->addWidget(new QLabel("Directory"), 1, 0);
759 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
760 eLayout->addWidget(new QLabel("Interval"), 2, 0);
761 eLayout->addWidget(_ephIntrComboBox, 2, 1);
762 eLayout->addWidget(new QLabel("Port"), 3, 0);
763 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
764 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
765 eLayout->addWidget(_ephV3CheckBox, 4, 1);
766 eLayout->addWidget(new QLabel(" "), 5, 0);
767 eLayout->addWidget(new QLabel(" "), 6, 0);
768 egroup->setLayout(eLayout);
769
770
771 // Broadcast Corrections
772 // ---------------------
773 QGridLayout* cLayout = new QGridLayout;
774 cLayout->setColumnMinimumWidth(0,14*ww);
775 _corrIntrComboBox->setMaximumWidth(9*ww);
776 _corrPortLineEdit->setMaximumWidth(9*ww);
777 _corrTimeSpinBox->setMaximumWidth(9*ww);
778
779 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),0,0,1,50);
780 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
781 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,20);
782 cLayout->addWidget(new QLabel("Interval"), 2, 0);
783 cLayout->addWidget(_corrIntrComboBox, 2, 1);
784 cLayout->addWidget(new QLabel("Port"), 3, 0);
785 cLayout->addWidget(_corrPortLineEdit, 3, 1);
786 cLayout->addWidget(new QLabel(" Wait for full corr epoch"), 3, 2, Qt::AlignRight);
787 cLayout->addWidget(_corrTimeSpinBox, 3, 3, Qt::AlignLeft);
788 cLayout->addWidget(new QLabel(" "), 4, 0);
789 cLayout->addWidget(new QLabel(" "), 5, 0);
790 cLayout->addWidget(new QLabel(" "), 6, 0);
791 cgroup->setLayout(cLayout);
792
793 // Feed Engine
794 // -----------
795 QGridLayout* sLayout = new QGridLayout;
796 sLayout->setColumnMinimumWidth(0,14*ww);
797 _outPortLineEdit->setMaximumWidth(9*ww);
798 _waitTimeSpinBox->setMaximumWidth(9*ww);
799 _binSamplSpinBox->setMaximumWidth(9*ww);
800 _outUPortLineEdit->setMaximumWidth(9*ww);
801
802 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine."),0,0,1,50);
803 sLayout->addWidget(new QLabel("Port"), 1, 0);
804 sLayout->addWidget(_outPortLineEdit, 1, 1);
805 sLayout->addWidget(new QLabel("Wait for full obs epoch"), 1, 2, Qt::AlignRight);
806 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
807 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
808 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
809 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
810 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 20);
811 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
812 sLayout->addWidget(_outUPortLineEdit, 4, 1);
813 sLayout->addWidget(new QLabel(" "), 5, 0);
814 sLayout->addWidget(new QLabel(" "), 6, 0);
815 sgroup->setLayout(sLayout);
816
817 // Serial Output
818 // -------------
819 QGridLayout* serLayout = new QGridLayout;
820 serLayout->setColumnMinimumWidth(0,14*ww);
821 _serialBaudRateComboBox->setMaximumWidth(9*ww);
822 _serialFlowControlComboBox->setMaximumWidth(11*ww);
823 _serialDataBitsComboBox->setMaximumWidth(5*ww);
824 _serialParityComboBox->setMaximumWidth(9*ww);
825 _serialStopBitsComboBox->setMaximumWidth(5*ww);
826 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
827 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
828
829 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver."),0,0,1,30);
830 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
831 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
832 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
833 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
834 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
835 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
836 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
837 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
838 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
839 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
840 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
841 serLayout->addWidget(_serialParityComboBox, 4, 3);
842 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
843 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
844 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
845 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
846 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
847 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,15);
848 serLayout->addWidget(new QLabel("Height"), 5,20, Qt::AlignRight);
849 serLayout->addWidget(_serialHeightNMEALineEdit, 5,21, 1,11);
850 serLayout->addWidget(new QLabel(" "), 6, 0);
851
852 sergroup->setLayout(serLayout);
853
854 // Outages
855 // -------
856 QGridLayout* aLayout = new QGridLayout;
857 aLayout->setColumnMinimumWidth(0,14*ww);
858 _obsRateComboBox->setMaximumWidth(9*ww);
859 _adviseFailSpinBox->setMaximumWidth(9*ww);
860 _adviseRecoSpinBox->setMaximumWidth(9*ww);
861
862 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes."),0,0,1,50,Qt::AlignLeft);
863 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
864 aLayout->addWidget(_obsRateComboBox, 1, 1);
865 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
866 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
867 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
868 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
869 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
870 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,30);
871 aLayout->addWidget(new QLabel(" "), 5, 0);
872 aLayout->addWidget(new QLabel(" "), 6, 0);
873 agroup->setLayout(aLayout);
874
875 // Miscellaneous
876 // -------------
877 QGridLayout* rLayout = new QGridLayout;
878 rLayout->setColumnMinimumWidth(0,14*ww);
879 _perfIntrComboBox->setMaximumWidth(9*ww);
880
881 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for numbers of message types and antenna information."),0, 0,1,30);
882 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
883 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1,7);
884 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
885 rLayout->addWidget(_perfIntrComboBox, 2, 1);
886 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
887 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
888 rLayout->addWidget(new QLabel(" "), 4, 0);
889 rLayout->addWidget(new QLabel(" "), 5, 0);
890 rLayout->addWidget(new QLabel(" "), 6, 0);
891 rgroup->setLayout(rLayout);
892
893 // PPP Client
894 // ----------
895 QGridLayout* pppLayout = new QGridLayout;
896 pppLayout->setColumnMinimumWidth(0,14*ww);
897 _pppSigCLineEdit->setMaximumWidth(6*ww);
898 _pppSigPLineEdit->setMaximumWidth(6*ww);
899 _pppSigCrd0->setMaximumWidth(6*ww);
900 _pppSigCrdP->setMaximumWidth(6*ww);
901 _pppSigTrp0->setMaximumWidth(6*ww);
902 _pppSigTrpP->setMaximumWidth(6*ww);
903 _pppAverageLineEdit->setMaximumWidth(6*ww);
904 _pppQuickStartLineEdit->setMaximumWidth(6*ww);
905 _pppMaxSolGapLineEdit->setMaximumWidth(6*ww);
906 _pppAudioResponseLineEdit->setMaximumWidth(6*ww);
907 _pppRefCrdXLineEdit->setMaximumWidth(10*ww);
908 _pppRefCrdYLineEdit->setMaximumWidth(10*ww);
909 _pppRefCrdZLineEdit->setMaximumWidth(10*ww);
910 _pppRefdNLineEdit->setMaximumWidth(6*ww);
911 _pppRefdELineEdit->setMaximumWidth(6*ww);
912 _pppRefdULineEdit->setMaximumWidth(6*ww);
913 _pppSync->setMaximumWidth(6*ww);
914 _pppSPPComboBox->setMinimumWidth(15*ww);
915
916 _postObsFileChooser = new qtFileChooser;
917 _postObsFileChooser->setFileName(settings.value("postObsFile").toString());
918 _postObsFileChooser->setMinimumWidth(15*ww);
919 _postNavFileChooser = new qtFileChooser;
920 _postNavFileChooser->setFileName(settings.value("postNavFile").toString());
921 _postNavFileChooser->setMinimumWidth(15*ww);
922 _postCorrFileChooser = new qtFileChooser;
923 _postCorrFileChooser->setFileName(settings.value("postCorrFile").toString());
924 _postCorrFileChooser->setMinimumWidth(15*ww);
925 _postOutLineEdit = new QLineEdit(settings.value("postOutFile").toString());
926 _postOutLineEdit->setMinimumWidth(15*ww);
927
928 int ir = 0;
929 pppLayout->addWidget(new QLabel("Precise Point Positioning, Panel 1."), ir, 0, 1, 2, Qt::AlignLeft);
930 ++ir;
931 pppLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
932 pppLayout->addWidget(_pppSPPComboBox, ir, 1, Qt::AlignRight);
933 pppLayout->addWidget(_pppMountLineEdit, ir, 3, Qt::AlignRight);
934 pppLayout->addWidget(new QLabel("Obs."), ir, 4, Qt::AlignLeft);
935 pppLayout->addWidget(_pppCorrMountLineEdit, ir, 5, Qt::AlignRight);
936 pppLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
937 ++ir;
938 pppLayout->addWidget(new QLabel("Marker coordinates"), ir, 0, Qt::AlignLeft);
939 pppLayout->addWidget(_pppRefCrdXLineEdit, ir, 1, Qt::AlignRight);
940 pppLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
941 pppLayout->addWidget(_pppRefCrdYLineEdit, ir, 3, Qt::AlignRight);
942 pppLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
943 pppLayout->addWidget(_pppRefCrdZLineEdit, ir, 5, Qt::AlignRight);
944 pppLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
945 ++ir;
946 pppLayout->addWidget(new QLabel("Antenna excentricity"), ir, 0, Qt::AlignLeft);
947 pppLayout->addWidget(_pppRefdNLineEdit, ir, 1, Qt::AlignRight);
948 pppLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
949 pppLayout->addWidget(_pppRefdELineEdit, ir, 3, Qt::AlignRight);
950 pppLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
951 pppLayout->addWidget(_pppRefdULineEdit, ir, 5, Qt::AlignRight);
952 pppLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
953 ++ir;
954 pppLayout->addWidget(new QLabel("NMEA & plot output"),ir, 0, Qt::AlignLeft);
955 pppLayout->addWidget(_pppNMEALineEdit, ir, 1, Qt::AlignRight);
956 pppLayout->addWidget(new QLabel("NMEA File"), ir, 2, Qt::AlignLeft);
957 pppLayout->addWidget(_pppNMEAPortLineEdit, ir, 3, Qt::AlignRight);
958 pppLayout->addWidget(new QLabel("NMEA Port"), ir, 4, Qt::AlignLeft);
959 ++ir;
960 pppLayout->addWidget(new QLabel("Post-processing"), ir, 0, Qt::AlignLeft);
961 pppLayout->addWidget(_postObsFileChooser, ir, 1, Qt::AlignRight);
962 pppLayout->addWidget(new QLabel("Obs "), ir, 2, Qt::AlignLeft);
963 pppLayout->addWidget(_postNavFileChooser, ir, 3, Qt::AlignRight);
964 pppLayout->addWidget(new QLabel("Nav "), ir, 4, Qt::AlignLeft);
965 ++ir;
966 pppLayout->addWidget(_postCorrFileChooser, ir, 1, Qt::AlignRight);
967 pppLayout->addWidget(new QLabel("Corr"), ir, 2, Qt::AlignLeft);
968 pppLayout->addWidget(_postOutLineEdit, ir, 3, Qt::AlignRight);
969 pppLayout->addWidget(new QLabel("Log (full path)"), ir, 4, Qt::AlignLeft);
970
971 pppgroup->setLayout(pppLayout);
972
973 // PPP Client (second panel)
974 // -------------------------
975 QGridLayout* ppp2Layout = new QGridLayout;
976 ppp2Layout->setColumnMinimumWidth(0,14*ww);
977 ir = 0;
978 ppp2Layout->addWidget(new QLabel("Precise Point Positioning, Panel 2."), ir, 0, 1, 10);
979 ++ir;
980 ppp2Layout->addWidget(new QLabel("Antennas"), ir, 0);
981 ppp2Layout->addWidget(_pppAntexFileChooser, ir, 1,1,3);
982 ppp2Layout->addWidget(new QLabel("ANTEX File"), ir, 4);
983 ppp2Layout->addWidget(_pppAntennaLineEdit, ir, 5,1,3);
984 ppp2Layout->addWidget(new QLabel("Antenna Name"), ir, 8);
985 ++ir;
986 ppp2Layout->addWidget(new QLabel("Basics"), ir, 0, 1, 5);
987 ppp2Layout->addWidget(_pppUsePhaseCheckBox, ir, 1, Qt::AlignRight);
988 ppp2Layout->addWidget(new QLabel("Use phase obs"), ir, 2);
989 ppp2Layout->addWidget(_pppEstTropoCheckBox, ir, 3, Qt::AlignRight);
990 ppp2Layout->addWidget(new QLabel("Estimate tropo"), ir, 4);
991 ppp2Layout->addWidget(_pppGLONASSCheckBox, ir, 5, Qt::AlignRight);
992 ppp2Layout->addWidget(new QLabel("Use GLONASS"), ir, 6);
993 ppp2Layout->addWidget(_pppGalileoCheckBox, ir, 7, Qt::AlignRight);
994 ppp2Layout->addWidget(new QLabel("Use Galileo "), ir, 8);
995 ++ir;
996 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
997 ppp2Layout->addWidget(_pppSync, ir, 1);
998 ppp2Layout->addWidget(new QLabel("Sync Corr (sec) "), ir, 2);
999 ppp2Layout->addWidget(_pppAverageLineEdit, ir, 3, Qt::AlignRight);
1000 ppp2Layout->addWidget(new QLabel("Averaging (min)") , ir, 4);
1001 ppp2Layout->addWidget(_pppQuickStartLineEdit, ir, 5, Qt::AlignRight);
1002 ppp2Layout->addWidget(new QLabel("Quick-Start (sec) "), ir, 6);
1003 ppp2Layout->addWidget(_pppMaxSolGapLineEdit, ir, 7, Qt::AlignRight);
1004 ppp2Layout->addWidget(new QLabel("Max Sol. Gap (sec)"), ir, 8);
1005 ++ir;
1006 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1007 ppp2Layout->addWidget(_pppAudioResponseLineEdit, ir, 1, Qt::AlignRight);
1008 ppp2Layout->addWidget(new QLabel("Audio response (m)"), ir, 2);
1009 ++ir;
1010 ppp2Layout->addWidget(new QLabel("Sigmas"), ir, 0);
1011 ppp2Layout->addWidget(_pppSigCLineEdit, ir, 1, Qt::AlignRight);
1012 ppp2Layout->addWidget(new QLabel("Code"), ir, 2);
1013 ppp2Layout->addWidget(_pppSigPLineEdit, ir, 3);
1014 ppp2Layout->addWidget(new QLabel("Phase"), ir, 4);
1015 ++ir;
1016 ppp2Layout->addWidget(new QLabel("Sigmas cont'd"), ir, 0);
1017 ppp2Layout->addWidget(_pppSigCrd0, ir, 1, Qt::AlignRight);
1018 ppp2Layout->addWidget(new QLabel("XYZ Init "), ir, 2);
1019 ppp2Layout->addWidget(_pppSigCrdP, ir, 3, Qt::AlignRight);
1020 ppp2Layout->addWidget(new QLabel("XYZ White Noise "), ir, 4);
1021 ppp2Layout->addWidget(_pppSigTrp0, ir, 5, Qt::AlignRight);
1022 ppp2Layout->addWidget(new QLabel("Tropo Init "), ir, 6);
1023 ppp2Layout->addWidget(_pppSigTrpP, ir, 7);
1024 ppp2Layout->addWidget(new QLabel("Tropo White Noise"), ir, 8);
1025 ++ir;
1026 ppp2Layout->addWidget(new QLabel(""), ir, 0);
1027
1028 ppp2group->setLayout(ppp2Layout);
1029
1030 // PPP Client (third panel)
1031 // ------------------------
1032 QVBoxLayout* ppp3Layout = new QVBoxLayout;
1033 ppp3Layout->addWidget(new QLabel("Precise Point Positioning, Panel 3."));
1034 ppp3Layout->addSpacing(ww);
1035
1036 QHBoxLayout* ppp3LayoutHlp1 = new QHBoxLayout;
1037 _pppPlotCoordinates = new QCheckBox();
1038 _pppPlotCoordinates->setCheckState(Qt::CheckState(settings.value("pppPlotCoordinates").toInt()));
1039 ppp3LayoutHlp1->addWidget(new QLabel("PPP Plot"));
1040 ppp3LayoutHlp1->addWidget(_pppPlotCoordinates);
1041 ppp3LayoutHlp1->addStretch();
1042 ppp3Layout->addLayout(ppp3LayoutHlp1);
1043 ppp3Layout->addSpacing(ww);
1044
1045 QHBoxLayout* ppp3LayoutHlp2 = new QHBoxLayout;
1046 _mapWinButton = new QPushButton;
1047 _mapWinButton->setText("Google / Open Street Map");
1048 connect(_mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1049 ppp3LayoutHlp2->addWidget(_mapWinButton);
1050
1051 ppp3LayoutHlp2->addSpacing(5*ww);
1052
1053 _gmRadioButton = new QRadioButton;
1054 _gmRadioButton->setChecked(!settings.value("useOsmMap").toBool());
1055 ppp3LayoutHlp2->addWidget(new QLabel("Google"));
1056 ppp3LayoutHlp2->addWidget(_gmRadioButton);
1057
1058 _osmRadioButton = new QRadioButton;
1059 _osmRadioButton->setChecked(settings.value("useOsmMap").toBool());
1060 ppp3LayoutHlp2->addWidget(new QLabel("OSM"));
1061 ppp3LayoutHlp2->addWidget(_osmRadioButton);
1062
1063 ppp3LayoutHlp2->addSpacing(5*ww);
1064
1065 _mapWinTraceCheckBox = new QCheckBox;
1066 _mapWinTraceCheckBox->setCheckState(Qt::CheckState(settings.value("mapWinTrace").toInt()));
1067 ppp3LayoutHlp2->addWidget(new QLabel("Trace"));
1068 ppp3LayoutHlp2->addWidget(_mapWinTraceCheckBox);
1069
1070 ppp3LayoutHlp2->addSpacing(5*ww);
1071
1072 _mapSpeedSlider = new QSlider;
1073 _mapSpeedSlider->setOrientation(Qt::Horizontal);
1074 _mapSpeedSlider->setRange(1, 100);
1075 _mapSpeedSlider->setTickPosition(QSlider::TicksBelow);
1076 _mapSpeedSlider->setTickInterval(10);
1077 int speed = settings.value("mapSpeed").toInt();
1078 if (speed == 0) speed = _mapSpeedSlider->maximum();
1079 _mapSpeedSlider->setSliderPosition(speed);
1080 ppp3LayoutHlp2->addWidget(new QLabel("Speed"));
1081 ppp3LayoutHlp2->addWidget(_mapSpeedSlider);
1082
1083 ppp3LayoutHlp2->addStretch();
1084 ppp3Layout->addLayout(ppp3LayoutHlp2);
1085
1086 ppp3Layout->addStretch();
1087 ppp3group->setLayout(ppp3Layout);
1088
1089 // Reqc Processing
1090 // ---------------
1091 _reqcActionComboBox = new QComboBox();
1092 _reqcActionComboBox->setEditable(false);
1093 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1094 ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1095 if (ik != -1) {
1096 _reqcActionComboBox->setCurrentIndex(ik);
1097 }
1098 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1099 this, SLOT(slotBncTextChanged()));
1100
1101 QGridLayout* reqcLayout = new QGridLayout;
1102 _reqcActionComboBox->setMinimumWidth(15*ww);
1103 _reqcActionComboBox->setMaximumWidth(15*ww);
1104
1105 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1106 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1107 _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
1108 _reqcObsFileChooser->setMinimumWidth(15*ww);
1109 _reqcObsFileChooser->setMaximumWidth(15*ww);
1110
1111 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1112 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1113 _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
1114 _reqcNavFileChooser->setMinimumWidth(15*ww);
1115 _reqcNavFileChooser->setMaximumWidth(15*ww);
1116
1117 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1118 _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to a RINEX observation output file."));
1119 _reqcOutObsLineEdit->setMinimumWidth(15*ww);
1120 _reqcOutObsLineEdit->setMaximumWidth(15*ww);
1121
1122 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1123 _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to a RINEX navigation output file."));
1124 _reqcOutNavLineEdit->setMinimumWidth(15*ww);
1125 _reqcOutNavLineEdit->setMaximumWidth(15*ww);
1126
1127 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1128 _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1129 _reqcOutLogLineEdit->setMinimumWidth(15*ww);
1130 _reqcOutLogLineEdit->setMaximumWidth(15*ww);
1131
1132 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1133 _reqcPlotDirLineEdit->setWhatsThis(tr("Specify the directory name for saving plots."));
1134 _reqcPlotDirLineEdit->setMinimumWidth(15*ww);
1135 _reqcPlotDirLineEdit->setMaximumWidth(15*ww);
1136
1137 _reqcSkyPlotSystems = new QComboBox();
1138 _reqcSkyPlotSystems->setEditable(false);
1139 _reqcSkyPlotSystems->addItems(QString("ALL,GPS,GLONASS,Galileo").split(","));
1140 ik = _reqcSkyPlotSystems->findText(settings.value("reqcSkyPlotSystems").toString());
1141 if (ik != -1) {
1142 _reqcSkyPlotSystems->setCurrentIndex(ik);
1143 }
1144
1145 ir = 0;
1146 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check."),ir, 0, 1, 20);
1147 ++ir;
1148 reqcLayout->addWidget(new QLabel("Action"), ir, 0, Qt::AlignLeft);
1149 reqcLayout->addWidget(_reqcActionComboBox, ir, 1, Qt::AlignLeft);
1150 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1151 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3, Qt::AlignRight);
1152 ++ir;
1153 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0, Qt::AlignLeft);
1154 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1, Qt::AlignRight);
1155 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1156 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3, Qt::AlignRight);
1157 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1158 ++ir;
1159 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0, Qt::AlignLeft);
1160 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1, Qt::AlignRight);
1161 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1162 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3, Qt::AlignRight);
1163 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1164 ++ir;
1165 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1, Qt::AlignRight);
1166 reqcLayout->addWidget(new QLabel("Log"), ir, 2, Qt::AlignLeft);
1167 ++ir;
1168 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0, Qt::AlignLeft);
1169 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1, Qt::AlignRight);
1170 ++ir;
1171 reqcLayout->addWidget(new QLabel("Sky plots for"), ir, 0, Qt::AlignLeft);
1172 reqcLayout->addWidget(_reqcSkyPlotSystems, ir, 1, Qt::AlignRight);
1173 ++ir;
1174 reqcLayout->addWidget(new QLabel(""), ir, 1);
1175 reqcLayout->setRowStretch(ir, 999);
1176
1177 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1178 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1179
1180 reqcgroup->setLayout(reqcLayout);
1181
1182 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1183 this, SLOT(slotReqcEditOption()));
1184
1185 // Combine Corrections
1186 // -------------------
1187 QGridLayout* cmbLayout = new QGridLayout;
1188
1189 populateCmbTable();
1190 cmbLayout->addWidget(_cmbTable, 0, 0, 6, 3);
1191 cmbLayout->addWidget(new QLabel(" "), 0, 5);
1192 cmbLayout->addWidget(new QLabel("Combine Broadcast Correction streams."), 0, 6, 1, 50);
1193 cmbLayout->addWidget(new QLabel(" "), 1, 5);
1194 cmbLayout->addWidget(addCmbRowButton, 1, 6);
1195 cmbLayout->addWidget(delCmbRowButton, 1, 7);
1196 cmbLayout->addWidget(new QLabel(" "), 2, 5);
1197 cmbLayout->addWidget(new QLabel("Method"), 2, 6, Qt::AlignRight);
1198 cmbLayout->addWidget(_cmbMethodComboBox, 2, 7, Qt::AlignRight);
1199 cmbLayout->addWidget(new QLabel(" "), 3, 5);
1200 cmbLayout->addWidget(new QLabel("Maximal Residuum"), 3, 6, Qt::AlignRight);
1201 cmbLayout->addWidget(_cmbMaxresLineEdit, 3, 7, Qt::AlignRight);
1202 cmbLayout->addWidget(new QLabel(" "), 4, 5);
1203 cmbLayout->addWidget(new QLabel("Sampling"), 4, 6, Qt::AlignRight);
1204 cmbLayout->addWidget(_cmbSamplSpinBox, 4, 7, Qt::AlignRight);
1205 cmbLayout->addWidget(new QLabel(" "), 5, 0);
1206
1207 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1208 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1209
1210 cmbgroup->setLayout(cmbLayout);
1211
1212 // Upload Layout (Clocks)
1213 // ----------------------
1214 QGridLayout* uploadHlpLayout = new QGridLayout();
1215
1216 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1217 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1218 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1219
1220 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1221 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1222 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1223 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1224 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1225 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1226 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1227 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1228 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1229 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1230 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1231
1232 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1233 populateUploadTable();
1234
1235 uploadLayout->addWidget(new QLabel("Upload RTCMv3 Broadcast Corrections to caster."));
1236 uploadLayout->addWidget(_uploadTable);
1237 uploadLayout->addLayout(uploadHlpLayout);
1238
1239 uploadgroup->setLayout(uploadLayout);
1240
1241 // Upload Layout (Ephemeris)
1242 // -------------------------
1243 QGridLayout* uploadLayoutEph = new QGridLayout;
1244
1245 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1246 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1247 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1248 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1249
1250 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster."), 0, 0, 1, 50);
1251 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1252 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1253 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1254 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1255 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1256 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1257 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1258 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1259 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1260 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1261 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1262 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1263 uploadLayoutEph->addWidget(new QLabel(" "), 5, 0);
1264 uploadLayoutEph->addWidget(new QLabel(" "), 6, 0);
1265
1266 uploadEphgroup->setLayout(uploadLayoutEph);
1267
1268 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1269 this, SLOT(slotBncTextChanged()));
1270
1271#ifdef RTROVER_INTERFACE
1272 QWidget* rtroverGroup = new QWidget();
1273 _aogroup->addTab(rtroverGroup,tr("RTRover"));
1274 QGridLayout* rtroverLayout = new QGridLayout();
1275
1276 _rtroverModeComboBox = new QComboBox();
1277
1278 _rtroverModeComboBox->setEditable(false);
1279 _rtroverModeComboBox->addItems(QString(",PPP_DF,SPP_DF,PPP_SF,SPP_SF,PPP_AR,RTK,PPP_FTTF").split(","));
1280 ik = _rtroverModeComboBox->findText(settings.value("rtroverMode").toString());
1281 if (ik != -1) {
1282 _rtroverModeComboBox->setCurrentIndex(ik);
1283 }
1284 _rtroverModeComboBox->setMinimumWidth(10*ww);
1285
1286 _rtroverRoverMountLineEdit = new QLineEdit(settings.value("rtroverRoverMount").toString());
1287 _rtroverRoverMountLineEdit->setMaximumWidth(8*ww);
1288 _rtroverCorrMountLineEdit = new QLineEdit(settings.value("rtroverCorrMount").toString());
1289 _rtroverCorrMountLineEdit->setMaximumWidth(8*ww);
1290 _rtroverBaseMountLineEdit = new QLineEdit(settings.value("rtroverBaseMount").toString());
1291 _rtroverBaseMountLineEdit->setMaximumWidth(8*ww);
1292 _rtroverRoverRefCrdXLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdX").toString());
1293 _rtroverRoverRefCrdYLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdY").toString());
1294 _rtroverRoverRefCrdZLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdZ").toString());
1295 _rtroverBaseRefCrdXLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdX").toString());
1296 _rtroverBaseRefCrdYLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdY").toString());
1297 _rtroverBaseCrdZLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdZ").toString());
1298 _rtroverRoverDNLineEdit = new QLineEdit(settings.value("rtroverRoverDN").toString());
1299 _rtroverRoverDNLineEdit->setMaximumWidth(6*ww);
1300 _rtroverRoverDELineEdit = new QLineEdit(settings.value("rtroverRoverDE").toString());
1301 _rtroverRoverDELineEdit->setMaximumWidth(6*ww);
1302 _rtroverRoverDULineEdit = new QLineEdit(settings.value("rtroverRoverDU").toString());
1303 _rtroverRoverDULineEdit->setMaximumWidth(6*ww);
1304 _rtroverBaseDNLineEdit = new QLineEdit(settings.value("rtroverBaseDN").toString());
1305 _rtroverBaseDNLineEdit->setMaximumWidth(6*ww);
1306 _rtroverBaseDELineEdit = new QLineEdit(settings.value("rtroverBaseDE").toString());
1307 _rtroverBaseDELineEdit->setMaximumWidth(6*ww);
1308 _rtroverBaseDULineEdit = new QLineEdit(settings.value("rtroverBaseDU").toString());
1309 _rtroverBaseDULineEdit->setMaximumWidth(6*ww);
1310 _rtroverRoverAntennaLineEdit = new QLineEdit(settings.value("rtroverRoverAntenna").toString());
1311 _rtroverBaseAntennaLineEdit = new QLineEdit(settings.value("rtroverBaseAntenna").toString());
1312 _rtroverAntexFileChooser = new qtFileChooser;
1313 _rtroverAntexFileChooser->setMinimumWidth(12*ww);
1314 _rtroverAntexFileChooser->setFileName(settings.value("rtroverAntex").toString());
1315 _rtroverOutputLineEdit = new QLineEdit(settings.value("rtroverOutput").toString());
1316 _rtroverOutputLineEdit->setMinimumWidth(15*ww);
1317
1318 ir = 0;
1319 rtroverLayout->addWidget(new QLabel("Real-Time Rover"), ir, 0, 1, 2, Qt::AlignLeft);
1320 ++ir;
1321 rtroverLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
1322 rtroverLayout->addWidget(_rtroverModeComboBox, ir, 1, Qt::AlignRight);
1323 rtroverLayout->addWidget(_rtroverRoverMountLineEdit, ir, 3, Qt::AlignRight);
1324 rtroverLayout->addWidget(new QLabel("Rover"), ir, 4, Qt::AlignLeft);
1325 rtroverLayout->addWidget(_rtroverCorrMountLineEdit, ir, 5, Qt::AlignRight);
1326 rtroverLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
1327 rtroverLayout->addWidget(_rtroverBaseMountLineEdit, ir, 7, Qt::AlignRight);
1328 rtroverLayout->addWidget(new QLabel("Base"), ir, 8, Qt::AlignLeft);
1329 ++ir;
1330 rtroverLayout->addWidget(new QLabel("Rover coordinates"), ir, 0, Qt::AlignLeft);
1331 rtroverLayout->addWidget(_rtroverRoverRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1332 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1333 rtroverLayout->addWidget(_rtroverRoverRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1334 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1335 rtroverLayout->addWidget(_rtroverRoverRefCrdZLineEdit, ir, 5, Qt::AlignRight);
1336 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1337 ++ir;
1338 rtroverLayout->addWidget(_rtroverRoverDNLineEdit, ir, 1, Qt::AlignRight);
1339 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1340 rtroverLayout->addWidget(_rtroverRoverDELineEdit, ir, 3, Qt::AlignRight);
1341 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1342 rtroverLayout->addWidget(_rtroverRoverDULineEdit, ir, 5, Qt::AlignRight);
1343 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1344 ++ir;
1345 rtroverLayout->addWidget(new QLabel("Base coordinates"), ir, 0, Qt::AlignLeft);
1346 rtroverLayout->addWidget(_rtroverBaseRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1347 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1348 rtroverLayout->addWidget(_rtroverBaseRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1349 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1350 rtroverLayout->addWidget(_rtroverBaseCrdZLineEdit, ir, 5, Qt::AlignRight);
1351 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1352 ++ir;
1353 rtroverLayout->addWidget(_rtroverBaseDNLineEdit, ir, 1, Qt::AlignRight);
1354 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1355 rtroverLayout->addWidget(_rtroverBaseDELineEdit, ir, 3, Qt::AlignRight);
1356 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1357 rtroverLayout->addWidget(_rtroverBaseDULineEdit, ir, 5, Qt::AlignRight);
1358 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1359 ++ir;
1360 rtroverLayout->addWidget(new QLabel("ANTEX"), ir, 0, Qt::AlignLeft);
1361 rtroverLayout->addWidget(_rtroverAntexFileChooser, ir, 1, Qt::AlignRight);
1362 rtroverLayout->addWidget(new QLabel("file"), ir, 2, Qt::AlignLeft);
1363 rtroverLayout->addWidget(_rtroverBaseAntennaLineEdit, ir, 3, Qt::AlignRight);
1364 rtroverLayout->addWidget(new QLabel("Ant. Rover"), ir, 4, Qt::AlignLeft);
1365 rtroverLayout->addWidget(_rtroverRoverAntennaLineEdit, ir, 5, Qt::AlignRight);
1366 rtroverLayout->addWidget(new QLabel("Ant. Base"), ir, 6, Qt::AlignLeft);
1367 ++ir;
1368 rtroverLayout->addWidget(new QLabel("Output"), ir, 0, Qt::AlignLeft);
1369 rtroverLayout->addWidget(_rtroverOutputLineEdit, ir, 1, Qt::AlignRight);
1370
1371 rtroverGroup->setLayout(rtroverLayout);
1372#endif
1373
1374 // Main Layout
1375 // -----------
1376 QGridLayout* mLayout = new QGridLayout;
1377 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1378 mLayout->addWidget(_aogroup, 0,0);
1379 mLayout->addWidget(_mountPointsTable, 1,0);
1380 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1381 mLayout->addWidget(_loggroup, 2,0);
1382
1383 _canvas->setLayout(mLayout);
1384
1385 // WhatsThis
1386 // ---------
1387 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1388 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1389 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1390 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1391 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1392 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1393 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1394 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1395 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1396 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1397 _corrTimeSpinBox->setWhatsThis(tr("<p>Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full corr epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application.</p><p>Specifying a value of '0' means that BNC immediately outputs all incoming Broadcast Epemeris Corrections and does not drop any of them for latency reasons.</p>"));
1398 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1399 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1400 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1401 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1402 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1403 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1404 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1405 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1406
1407 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1408 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1409 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1410 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1411 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1412 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1413 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1414 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1415 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1416 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1417 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1418 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1419 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster. The default values can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1420 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1421 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1422 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1423 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1424 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1425 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1426 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1427 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p>"));
1428 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1429 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1430 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1431 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1432 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1433 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1434 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA-GGA messages coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' only when handling a VRS stream and your serial connected receiver doesn't generate NMEA-GGA messages.</p>"));
1435 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
1436 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
1437 _pppMountLineEdit->setWhatsThis(tr("<p>Specify an observations stream by its mountpoint from the 'Streams' list compiled below if you want BNC to estimate coordinates for the affected receiver position through a PPP solution. Example: 'FFMJ1'</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris referring to the satellites' Antenna Phase Centers (APC). Stream CLK11 on NTRIP broadcaster products.igs-ip.net is an example.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver in low repetition rate or don't come at all from there.</p>"));
1438 _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'. Corrections must refer to satellite Antenna Phase Centers (APC).</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combine Corrections' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
1439 _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
1440 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check following UNAVCO's famous 'teqc' program.</p>"));
1441 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1442 _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
1443 _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
1444 _pppGLONASSCheckBox->setWhatsThis(tr("<p>By default BNC does not use GLONASS observations in PPP mode.</p><p>Tick 'Use GLONASS' for adding GLONASS observations to GPS and Galileo (optional) in a PPP solution.</p>"));
1445 _pppGalileoCheckBox->setWhatsThis(tr("<p>By default BNC does not use Galileo observations in PPP mode.</p><p>Tick 'Use Galileo' for adding Galileo observations to GPS and GLONASS (optional) in a PPP solution.</p>"));
1446 _pppPlotCoordinates->setWhatsThis(tr("<p>BNC will plot PPP results in the 'PPP Plot' tab as North (red), East (green) and Up (blue) displacements when this option is selected. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes.</p><p>Note that a PPP time series makes only sense for a stationary operated receiver."));
1447 _pppNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where PPP results are saved as NMEA messages.</p>"));
1448 _pppNMEAPortLineEdit->setWhatsThis(tr("<p>Specify an IP port number to output PPP results as NMEA messages through an IP port.</p>"));
1449 _pppSigCLineEdit->setWhatsThis(tr("<p>Enter a sigma for your code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of code observations to a PPP solution based on a combination of code and phase data. 5.0 (default) is likely to be an appropriate choice.</p>"));
1450 _pppQuickStartLineEdit->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solution to a known XYZ coordinate as introduced above and adjust a sigma 'XYZ Ini' according to the coordinate's precision. Fixing the coordinate is done in BNC through setting the 'Sigma XYZ Noise' you define below temporarily to zero.</p><p>This so-called Quick-Start option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the know position throughout the startup period.</p><p>A value of 120 is likely to be an appropriate choice for 'Quick-Start'. Default is an empty option field, meaning that you don't want BNC to operate in Quick-Start mode.</p>"));
1451 _pppMaxSolGapLineEdit->setWhatsThis(tr("<p>Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive solutions exceed this limit, the algorithm returns into Quick-Start mode and fixes the introduced reference coordinate for the specified period. A value of '60' seconds could be an appropriate choice.</p><p>This option makes only sense for a stationary operated receiver where solution convergence can be enforced because a good approximation for the rover position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages.</p>"));
1452 _pppAudioResponseLineEdit->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
1453 _pppSigPLineEdit->setWhatsThis(tr("<p>Enter a sigma for your phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of phase observations to a PPP solutions based on a combination of code and phase data. 0.02 (default) is likely to be an appropriate choice.</p>"));
1454 _pppAverageLineEdit->setWhatsThis(tr("<p>Enter the length of a sliding time window in minutes. BNC will continuously output moving average positions computed from those individual positions obtained most recently throughout this period.</p><p>An empty option field (default) means that you don't want BNC to output moving average positions.</p>"));
1455 _pppSigCrd0->setWhatsThis(tr("<p>Enter a sigma in meters for the initial XYZ coordinate componentes. A value of 100.0 (default) may be an appropriate choice. However, this value may be significantly smaller (i.e. 0.01) when starting for example from a station with known XZY position in Quick-Start mode."));
1456 _pppSigCrdP->setWhatsThis(tr("<p>Enter a sigma in meters for the white noise of estimated XYZ coordinate components. A value of 100.0 (default) may be appropriate considering the potential movement of a rover position.</p>"));
1457 _pppSigTrp0->setWhatsThis(tr("<p>Enter a sigma in meters for the a-priory model based tropospheric delay estimation. A value of 0.1 (default) may be an appropriate choice.</p>"));
1458 _pppSigTrpP->setWhatsThis(tr("<p>Enter a sigma in meters per second to describe the expected variation of the tropospheric effect.</p><p>Supposing 1Hz observation data, a value of 3e-6 (default) would mean that the tropospheric effect may vary for 3600 * 3e-6 = 0.01 meters per hour.</p>"));
1459 _pppRefCrdXLineEdit->setWhatsThis(tr("<p>Enter reference coordinate X of the receiver's position.</p><p>This option only makes sense in static observation conditions.</p>"));
1460 _pppRefCrdYLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Y of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1461 _pppRefCrdZLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Z of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1462 _pppRefdNLineEdit->setWhatsThis(tr("<p>Enter north antenna excentricity.</p>"));
1463 _pppRefdELineEdit->setWhatsThis(tr("<p>Enter east antenna excentricity.</p>"));
1464 _pppRefdULineEdit->setWhatsThis(tr("<p>Enter up antenna excentricity.</p>"));
1465 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1466 _pppSync->setWhatsThis(tr(
1467 "<p> Zero value (or empty field, default) means that BNC processes each epoch of data "
1468 "immediately after its arrival using satellite clock corrections available at "
1469 "that time.</p><p> Non-zero value 'Sync Corr' (i.e. 5) means that the epochs of data "
1470 "are buffered and the processing of each epoch is postponed till the satellite clock "
1471 "corrections not older than 'Sync Corr' seconds are available.<p>"));
1472 _pppAntexFileChooser->setWhatsThis(tr("<p>IGS provides a file containing absolute phase center corrections for GNSS satellite and receiver antennas in ANTEX format. Entering the full path to such an ANTEX file is required for correcting observations for antenna phase center offsets and variations. It allows you to specify the name of your receiver's antenna (as contained in the ANTEX file) to apply such corrections.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets and variations.</p>"));
1473 _pppAntennaLineEdit->setWhatsThis(tr("<p>Specify the receiver's antenna name as defined in your ANTEX file. Observations will be corrected for the antenna phase center's offset which may result in a reduction of a few centimeters at max. Corrections for phase center variations are not yet applied by BNC. The specified name must consist of 20 characters. Add trailing blanks if the antenna name has less then 20 characters.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets.</p>"));
1474 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.<ul><li>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</li><li>Note also that you need to tick 'Use GLONASS' which is part ot the 'PPP (2)' panel in case you want to produce an GPS plus GLONASS combination.</li></ul></p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1475 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1476 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval. Clock and orbit corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1477 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1478 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><ul><li>As an SP3 file contents should be referred to the satellites Center of Mass (CoM) while correctors are referred to the satellites Antenna Phase Center (APC), an offset has to be applied which is available from an IGS ANTEX file. You should therefore specify the 'ANTEX File' path under tab 'PPP (2)' if you want to save the stream contents in SP3 format. If you don't specify an 'ANTEX File' path there, the SP3 file contents will be referred to the satellites APCs.</li></ul></p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1479 _postObsFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Observation file."));
1480 _postNavFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Navigation file."));
1481 _postCorrFileChooser->setWhatsThis(tr("Full path to Broadcast Corrections file as previously saved with BNC in plain ASCII format."));
1482 _postOutLineEdit->setWhatsThis(tr("Full path to file with post processing PPP results. "));
1483 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1484 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1485 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1486 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1487 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1488 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1489 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1490 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1491 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1492
1493 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1494 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1495 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1496 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1497 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1498 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1499
1500 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1501 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1502 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1503
1504 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1505 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1506// Weber
1507
1508 // Enable/Disable all Widgets
1509 // --------------------------
1510 slotBncTextChanged();
1511 enableStartStop();
1512
1513 // Auto start
1514 // ----------
1515 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1516 slotStart();
1517 }
1518}
1519
1520// Destructor
1521////////////////////////////////////////////////////////////////////////////
1522bncWindow::~bncWindow() {
1523 delete _caster;
1524 delete _casterEph;
1525}
1526
1527//
1528////////////////////////////////////////////////////////////////////////////
1529void bncWindow::populateMountPointsTable() {
1530
1531 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1532 _mountPointsTable->removeRow(iRow);
1533 }
1534
1535 bncSettings settings;
1536
1537 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1538 int iRow = 0;
1539 while (it.hasNext()) {
1540 QStringList hlp = it.next().split(" ");
1541 if (hlp.size() < 5) continue;
1542 _mountPointsTable->insertRow(iRow);
1543
1544 QUrl url(hlp[0]);
1545
1546 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1547 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1548 QString nmea(hlp[4]);
1549 if (hlp[5] == "S") {
1550 fullPath = hlp[0].replace(0,2,"");
1551 }
1552 QString ntripVersion = "2";
1553 if (hlp.size() >= 6) {
1554 ntripVersion = (hlp[5]);
1555 }
1556
1557 QTableWidgetItem* it;
1558 it = new QTableWidgetItem(url.userInfo());
1559 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1560 _mountPointsTable->setItem(iRow, 0, it);
1561
1562 it = new QTableWidgetItem(fullPath);
1563 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1564 _mountPointsTable->setItem(iRow, 1, it);
1565
1566 it = new QTableWidgetItem(format);
1567 _mountPointsTable->setItem(iRow, 2, it);
1568
1569 if (nmea == "yes") {
1570 it = new QTableWidgetItem(latitude);
1571 _mountPointsTable->setItem(iRow, 3, it);
1572 it = new QTableWidgetItem(longitude);
1573 _mountPointsTable->setItem(iRow, 4, it);
1574 } else {
1575 it = new QTableWidgetItem(latitude);
1576 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1577 _mountPointsTable->setItem(iRow, 3, it);
1578 it = new QTableWidgetItem(longitude);
1579 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1580 _mountPointsTable->setItem(iRow, 4, it);
1581 }
1582
1583 it = new QTableWidgetItem(nmea);
1584 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1585 _mountPointsTable->setItem(iRow, 5, it);
1586
1587 it = new QTableWidgetItem(ntripVersion);
1588 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1589 _mountPointsTable->setItem(iRow, 6, it);
1590
1591 bncTableItem* bncIt = new bncTableItem();
1592 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1593 _mountPointsTable->setItem(iRow, 7, bncIt);
1594
1595 iRow++;
1596 }
1597
1598 _mountPointsTable->sortItems(1);
1599
1600 enableStartStop();
1601}
1602
1603// Retrieve Table
1604////////////////////////////////////////////////////////////////////////////
1605void bncWindow::slotAddMountPoints() {
1606
1607 bncSettings settings;
1608 QString proxyHost = settings.value("proxyHost").toString();
1609 int proxyPort = settings.value("proxyPort").toInt();
1610 if (proxyHost != _proxyHostLineEdit->text() ||
1611 proxyPort != _proxyPortLineEdit->text().toInt()) {
1612 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1613 "changed. Use the new ones?",
1614 QMessageBox::Yes, QMessageBox::No,
1615 QMessageBox::NoButton);
1616 if (iRet == QMessageBox::Yes) {
1617 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1618 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1619 }
1620 }
1621
1622 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1623 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1624
1625 QMessageBox msgBox;
1626 msgBox.setIcon(QMessageBox::Question);
1627 msgBox.setWindowTitle("Add Stream");
1628 msgBox.setText("Add stream(s) coming from:");
1629
1630 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1631 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1632 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1633 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1634 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1635
1636 msgBox.exec();
1637
1638 if (msgBox.clickedButton() == buttonNtrip) {
1639 bncTableDlg* dlg = new bncTableDlg(this);
1640 dlg->move(this->pos().x()+50, this->pos().y()+50);
1641 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1642 this, SLOT(slotNewMountPoints(QStringList*)));
1643 dlg->exec();
1644 delete dlg;
1645 } else if (msgBox.clickedButton() == buttonIP) {
1646 bncIpPort* ipp = new bncIpPort(this);
1647 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1648 this, SLOT(slotNewMountPoints(QStringList*)));
1649 ipp->exec();
1650 delete ipp;
1651 } else if (msgBox.clickedButton() == buttonUDP) {
1652 bncUdpPort* udp = new bncUdpPort(this);
1653 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1654 this, SLOT(slotNewMountPoints(QStringList*)));
1655 udp->exec();
1656 delete udp;
1657 } else if (msgBox.clickedButton() == buttonSerial) {
1658 bncSerialPort* sep = new bncSerialPort(this);
1659 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1660 this, SLOT(slotNewMountPoints(QStringList*)));
1661 sep->exec();
1662 delete sep;
1663 } else if (msgBox.clickedButton() == buttonCancel) {
1664 // Cancel
1665 }
1666
1667 enableStartStop();
1668}
1669
1670// Delete Selected Mount Points
1671////////////////////////////////////////////////////////////////////////////
1672void bncWindow::slotDeleteMountPoints() {
1673
1674 int nRows = _mountPointsTable->rowCount();
1675 bool flg[nRows];
1676 for (int iRow = 0; iRow < nRows; iRow++) {
1677 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1678 flg[iRow] = true;
1679 }
1680 else {
1681 flg[iRow] = false;
1682 }
1683 }
1684 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1685 if (flg[iRow]) {
1686 _mountPointsTable->removeRow(iRow);
1687 }
1688 }
1689 _actDeleteMountPoints->setEnabled(false);
1690
1691 enableStartStop();
1692}
1693
1694// New Mount Points Selected
1695////////////////////////////////////////////////////////////////////////////
1696void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1697 int iRow = 0;
1698 QListIterator<QString> it(*mountPoints);
1699 while (it.hasNext()) {
1700 QStringList hlp = it.next().split(" ");
1701 QUrl url(hlp[0]);
1702 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1703 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1704 QString nmea(hlp[4]);
1705 if (hlp[5] == "S") {
1706 fullPath = hlp[0].replace(0,2,"");
1707 }
1708 QString ntripVersion = "2";
1709 if (hlp.size() >= 6) {
1710 ntripVersion = (hlp[5]);
1711 }
1712
1713 _mountPointsTable->insertRow(iRow);
1714
1715 QTableWidgetItem* it;
1716 it = new QTableWidgetItem(url.userInfo());
1717 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1718 _mountPointsTable->setItem(iRow, 0, it);
1719
1720 it = new QTableWidgetItem(fullPath);
1721 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1722 _mountPointsTable->setItem(iRow, 1, it);
1723
1724 it = new QTableWidgetItem(format);
1725 _mountPointsTable->setItem(iRow, 2, it);
1726
1727 if (nmea == "yes") {
1728 it = new QTableWidgetItem(latitude);
1729 _mountPointsTable->setItem(iRow, 3, it);
1730 it = new QTableWidgetItem(longitude);
1731 _mountPointsTable->setItem(iRow, 4, it);
1732 } else {
1733 it = new QTableWidgetItem(latitude);
1734 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1735 _mountPointsTable->setItem(iRow, 3, it);
1736 it = new QTableWidgetItem(longitude);
1737 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1738 _mountPointsTable->setItem(iRow, 4, it);
1739 }
1740
1741 it = new QTableWidgetItem(nmea);
1742 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1743 _mountPointsTable->setItem(iRow, 5, it);
1744
1745 it = new QTableWidgetItem(ntripVersion);
1746 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1747 _mountPointsTable->setItem(iRow, 6, it);
1748
1749 bncTableItem* bncIt = new bncTableItem();
1750 _mountPointsTable->setItem(iRow, 7, bncIt);
1751
1752 iRow++;
1753 }
1754 _mountPointsTable->hideColumn(0);
1755 _mountPointsTable->sortItems(1);
1756 delete mountPoints;
1757
1758 enableStartStop();
1759}
1760
1761// Save Options (serialize)
1762////////////////////////////////////////////////////////////////////////////
1763void bncWindow::slotSaveOptions() {
1764 saveOptions();
1765 bncSettings settings;
1766 settings.sync();
1767}
1768
1769// Save Options (memory only)
1770////////////////////////////////////////////////////////////////////////////
1771void bncWindow::saveOptions() {
1772
1773 QStringList mountPoints;
1774 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1775
1776 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1777 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1778 "@" + _mountPointsTable->item(iRow, 1)->text() );
1779
1780 mountPoints.append(url.toString() + " " +
1781 _mountPointsTable->item(iRow, 2)->text()
1782 + " " + _mountPointsTable->item(iRow, 3)->text()
1783 + " " + _mountPointsTable->item(iRow, 4)->text()
1784 + " " + _mountPointsTable->item(iRow, 5)->text()
1785 + " " + _mountPointsTable->item(iRow, 6)->text());
1786 } else {
1787 mountPoints.append(
1788 "//" + _mountPointsTable->item(iRow, 1)->text()
1789 + " " + _mountPointsTable->item(iRow, 2)->text()
1790 + " " + _mountPointsTable->item(iRow, 3)->text()
1791 + " " + _mountPointsTable->item(iRow, 4)->text()
1792 + " " + _mountPointsTable->item(iRow, 5)->text()
1793 + " " + _mountPointsTable->item(iRow, 6)->text());
1794 }
1795 }
1796
1797 QStringList combineStreams;
1798 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1799 QString hlp;
1800 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1801 if (_cmbTable->item(iRow, iCol)) {
1802 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1803 }
1804 }
1805 if (!hlp.isEmpty()) {
1806 combineStreams << hlp;
1807 }
1808 }
1809
1810 QStringList uploadMountpointsOut;
1811 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1812 QString hlp;
1813 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1814 if (_uploadTable->cellWidget(iRow, iCol) &&
1815 (iCol == 3 || iCol == 4 || iCol == 5)) {
1816 if (iCol == 3) {
1817 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1818 hlp += passwd->text() + ",";
1819 }
1820 else if (iCol == 4) {
1821 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1822 hlp += system->currentText() + ",";
1823 }
1824 else if (iCol == 5) {
1825 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1826 QString state; state.setNum(com->checkState());
1827 hlp += state + ",";
1828 }
1829 }
1830 else if (_uploadTable->item(iRow, iCol)) {
1831 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1832 }
1833 }
1834 if (!hlp.isEmpty()) {
1835 uploadMountpointsOut << hlp;
1836 }
1837 }
1838
1839 bncSettings settings;
1840
1841 settings.setValue("startTab", _aogroup->currentIndex());
1842 settings.setValue("statusTab", _loggroup->currentIndex());
1843 settings.setValue("mountPoints", mountPoints);
1844// Network
1845 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1846 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1847 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1848 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1849// General
1850 settings.setValue("logFile", _logFileLineEdit->text());
1851 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1852 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1853 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1854 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1855// RINEX Observations
1856 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1857 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1858 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1859 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1860 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1861 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1862// RINEX Ephemeris
1863 settings.setValue("ephPath", _ephPathLineEdit->text());
1864 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1865 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1866 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1867// Broadcast Corrections
1868 settings.setValue("corrPath", _corrPathLineEdit->text());
1869 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1870 settings.setValue("corrPort", _corrPortLineEdit->text());
1871 settings.setValue("corrTime", _corrTimeSpinBox->value());
1872// Feed Engine
1873 settings.setValue("outPort", _outPortLineEdit->text());
1874 settings.setValue("waitTime", _waitTimeSpinBox->value());
1875 settings.setValue("binSampl", _binSamplSpinBox->value());
1876 settings.setValue("outFile", _outFileLineEdit->text());
1877 settings.setValue("outUPort", _outUPortLineEdit->text());
1878// Serial Output
1879 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1880 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1881 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1882 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1883 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1884 settings.setValue("serialParity", _serialParityComboBox->currentText());
1885 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1886 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1887 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1888 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1889// Outages
1890 settings.setValue("obsRate", _obsRateComboBox->currentText());
1891 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1892 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1893 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1894// Miscellaneous
1895 settings.setValue("miscMount", _miscMountLineEdit->text());
1896 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1897 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1898// PPPP
1899 settings.setValue("pppSPP", _pppSPPComboBox->currentText());
1900 settings.setValue("pppMount", _pppMountLineEdit->text());
1901 settings.setValue("pppCorrMount",_pppCorrMountLineEdit->text());
1902 settings.setValue("pppRefCrdX", _pppRefCrdXLineEdit->text());
1903 settings.setValue("pppRefCrdY", _pppRefCrdYLineEdit->text());
1904 settings.setValue("pppRefCrdZ", _pppRefCrdZLineEdit->text());
1905 settings.setValue("pppRefdN", _pppRefdNLineEdit->text());
1906 settings.setValue("pppRefdE", _pppRefdELineEdit->text());
1907 settings.setValue("pppRefdU", _pppRefdULineEdit->text());
1908 settings.setValue("nmeaFile", _pppNMEALineEdit->text());
1909 settings.setValue("nmeaPort", _pppNMEAPortLineEdit->text());
1910 settings.setValue("pppPlotCoordinates", _pppPlotCoordinates->checkState());
1911 settings.setValue("useOsmMap", _osmRadioButton->isChecked());
1912 settings.setValue("mapWinTrace", _mapWinTraceCheckBox->checkState());
1913 settings.setValue("mapSpeed", _mapSpeedSlider->value());
1914 settings.setValue("postObsFile", _postObsFileChooser->fileName());
1915 settings.setValue("postNavFile", _postNavFileChooser->fileName());
1916 settings.setValue("postCorrFile", _postCorrFileChooser->fileName());
1917 settings.setValue("postOutFile", _postOutLineEdit->text());
1918 settings.setValue("pppAntenna", _pppAntennaLineEdit->text());
1919 settings.setValue("pppAntex", _pppAntexFileChooser->fileName());
1920 settings.setValue("pppUsePhase", _pppUsePhaseCheckBox->checkState());
1921 settings.setValue("pppEstTropo", _pppEstTropoCheckBox->checkState());
1922 settings.setValue("pppGLONASS", _pppGLONASSCheckBox->checkState());
1923 settings.setValue("pppGalileo", _pppGalileoCheckBox->checkState());
1924 settings.setValue("pppSync", _pppSync->text());
1925 settings.setValue("pppAverage", _pppAverageLineEdit->text());
1926 settings.setValue("pppQuickStart", _pppQuickStartLineEdit->text());
1927 settings.setValue("pppMaxSolGap", _pppMaxSolGapLineEdit->text());
1928 settings.setValue("pppAudioResponse", _pppAudioResponseLineEdit->text());
1929 settings.setValue("pppSigmaCode",_pppSigCLineEdit->text());
1930 settings.setValue("pppSigmaPhase",_pppSigPLineEdit->text());
1931 settings.setValue("pppSigCrd0",_pppSigCrd0->text());
1932 settings.setValue("pppSigCrdP",_pppSigCrdP->text());
1933 settings.setValue("pppSigTrp0",_pppSigTrp0->text());
1934 settings.setValue("pppSigTrpP",_pppSigTrpP->text());
1935// Reqc
1936 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1937 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1938 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1939 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1940 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1941 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1942 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1943 settings.setValue("reqcSkyPlotSystems", _reqcSkyPlotSystems->currentText());
1944// Combine Corrections
1945 if (!combineStreams.isEmpty()) {
1946 settings.setValue("combineStreams", combineStreams);
1947 }
1948 else {
1949 settings.setValue("combineStreams", "");
1950 }
1951 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1952 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1953 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1954// Upload Corrections
1955 if (!uploadMountpointsOut.isEmpty()) {
1956 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1957 }
1958 else {
1959 settings.setValue("uploadMountpointsOut", "");
1960 }
1961 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1962 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1963 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1964 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1965// Upload Ephemeris
1966 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1967 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1968 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1969 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1970 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1971
1972#ifdef RTROVER_INTERFACE
1973 settings.setValue("rtroverMode", _rtroverModeComboBox->currentText());
1974 settings.setValue("rtroverRoverMount", _rtroverRoverMountLineEdit->text());
1975 settings.setValue("rtroverCorrMount", _rtroverCorrMountLineEdit->text());
1976 settings.setValue("rtroverBaseMount", _rtroverBaseMountLineEdit->text());
1977 settings.setValue("rtroverRoverRefCrdX", _rtroverRoverRefCrdXLineEdit->text());
1978 settings.setValue("rtroverRoverRefCrdY", _rtroverRoverRefCrdYLineEdit->text());
1979 settings.setValue("rtroverRoverRefCrdZ", _rtroverRoverRefCrdZLineEdit->text());
1980 settings.setValue("rtroverBaseRefCrdX", _rtroverBaseRefCrdXLineEdit->text());
1981 settings.setValue("rtroverBaseRefCrdY", _rtroverBaseRefCrdYLineEdit->text());
1982 settings.setValue("rtroverBaseRefCrdZ", _rtroverBaseCrdZLineEdit->text());
1983 settings.setValue("rtroverRoverDN", _rtroverRoverDNLineEdit->text());
1984 settings.setValue("rtroverRoverDE", _rtroverRoverDELineEdit->text());
1985 settings.setValue("rtroverRoverDU", _rtroverRoverDULineEdit->text());
1986 settings.setValue("rtroverBaseDN", _rtroverBaseDNLineEdit->text());
1987 settings.setValue("rtroverBaseDE", _rtroverBaseDELineEdit->text());
1988 settings.setValue("rtroverBaseDU", _rtroverBaseDULineEdit->text());
1989 settings.setValue("rtroverRoverAntenna", _rtroverRoverAntennaLineEdit->text());
1990 settings.setValue("rtroverBaseAntenna", _rtroverBaseAntennaLineEdit->text());
1991 settings.setValue("rtroverAntex", _rtroverAntexFileChooser->fileName());
1992 settings.setValue("rtroverOutput", _rtroverOutputLineEdit->text());
1993#endif
1994
1995 if (_caster) {
1996 _caster->readMountPoints();
1997 }
1998}
1999
2000// All get slots terminated
2001////////////////////////////////////////////////////////////////////////////
2002void bncWindow::slotGetThreadsFinished() {
2003 BNC_CORE->slotMessage("All Get Threads Terminated", true);
2004 delete _caster; _caster = 0;
2005 delete _casterEph; _casterEph = 0;
2006 _runningRealTime = false;
2007}
2008
2009// Start It!
2010////////////////////////////////////////////////////////////////////////////
2011void bncWindow::slotStart() {
2012 saveOptions();
2013 if ( _pppSPPComboBox->currentText() == "Post-Processing" ) {
2014 startPostProcessingPPP();
2015 }
2016 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2017 startPostProcessingReqc();
2018 }
2019 else {
2020 startRealTime();
2021 }
2022}
2023
2024// Start Real-Time (Retrieve Data etc.)
2025////////////////////////////////////////////////////////////////////////////
2026void bncWindow::startRealTime() {
2027
2028 _runningRealTime = true;
2029
2030 _bncFigurePPP->reset();
2031
2032 _actDeleteMountPoints->setEnabled(false);
2033
2034 enableStartStop();
2035
2036 _caster = new bncCaster(_outFileLineEdit->text(),
2037 _outPortLineEdit->text().toInt());
2038
2039 BNC_CORE->setPort(_outEphPortLineEdit->text().toInt());
2040 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2041 BNC_CORE->initCombination();
2042
2043 connect(_caster, SIGNAL(getThreadsFinished()),
2044 this, SLOT(slotGetThreadsFinished()));
2045
2046 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2047 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2048
2049 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " =========", true);
2050
2051 bncSettings settings;
2052
2053 QDir rnxdir(settings.value("rnxPath").toString());
2054 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2055
2056 QString rnx_file = settings.value("rnxScript").toString();
2057 if ( !rnx_file.isEmpty() ) {
2058 QFile rnxfile(settings.value("rnxScript").toString());
2059 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2060 }
2061
2062 QDir ephdir(settings.value("ephPath").toString());
2063 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2064
2065 QDir corrdir(settings.value("corrPath").toString());
2066 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2067
2068 QString advise_file = settings.value("adviseScript").toString();
2069 if ( !advise_file.isEmpty() ) {
2070 QFile advisefile(settings.value("adviseScript").toString());
2071 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2072 }
2073
2074 QString ant_file = settings.value("pppAntex").toString();
2075 if ( !ant_file.isEmpty() ) {
2076 QFile anxfile(settings.value("pppAntex").toString());
2077 if (!anxfile.exists()) BNC_CORE->slotMessage("Cannot find IGS ANTEX file", true);
2078 }
2079
2080 _caster->readMountPoints();
2081
2082 _casterEph = new bncEphUploadCaster();
2083 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2084 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2085}
2086
2087// Retrieve Data
2088////////////////////////////////////////////////////////////////////////////
2089void bncWindow::slotStop() {
2090 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
2091 QMessageBox::Yes, QMessageBox::No,
2092 QMessageBox::NoButton);
2093 if (iRet == QMessageBox::Yes) {
2094 BNC_CORE->stopCombination();
2095 delete _caster; _caster = 0;
2096 delete _casterEph; _casterEph = 0;
2097 _runningRealTime = false;
2098 enableStartStop();
2099 }
2100}
2101
2102// Close Application gracefully
2103////////////////////////////////////////////////////////////////////////////
2104void bncWindow::closeEvent(QCloseEvent* event) {
2105
2106 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2107 QMessageBox::Yes, QMessageBox::No,
2108 QMessageBox::Cancel);
2109
2110 if (iRet == QMessageBox::Cancel) {
2111 event->ignore();
2112 return;
2113 }
2114 else if (iRet == QMessageBox::Yes) {
2115 slotSaveOptions();
2116 }
2117
2118 if (_postProcessing) {
2119 _postProcessing->terminate();
2120 }
2121
2122 QMainWindow::closeEvent(event);
2123}
2124
2125// User changed the selection of mountPoints
2126////////////////////////////////////////////////////////////////////////////
2127void bncWindow::slotSelectionChanged() {
2128 if (_mountPointsTable->selectedItems().isEmpty()) {
2129 _actDeleteMountPoints->setEnabled(false);
2130 }
2131 else {
2132 _actDeleteMountPoints->setEnabled(true);
2133 }
2134}
2135
2136// Display Program Messages
2137////////////////////////////////////////////////////////////////////////////
2138void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2139
2140#ifdef DEBUG_RTCM2_2021
2141 const int maxBufferSize = 1000;
2142#else
2143 const int maxBufferSize = 10000;
2144#endif
2145
2146 if (! showOnScreen ) {
2147 return;
2148 }
2149
2150 QString txt = _log->toPlainText() + "\n" +
2151 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
2152 _log->clear();
2153 _log->append(txt.right(maxBufferSize));
2154}
2155
2156// About Message
2157////////////////////////////////////////////////////////////////////////////
2158void bncWindow::slotAbout() {
2159 new bncAboutDlg(0);
2160}
2161
2162//Flowchart
2163////////////////////////////////////////////////////////////////////////////
2164void bncWindow::slotFlowchart() {
2165 new bncFlowchartDlg(0);
2166}
2167
2168// Help Window
2169////////////////////////////////////////////////////////////////////////////
2170void bncWindow::slotHelp() {
2171 QUrl url;
2172 url.setPath(":bnchelp.html");
2173 new bncHlpDlg(0, url);
2174}
2175
2176// Select Fonts
2177////////////////////////////////////////////////////////////////////////////
2178void bncWindow::slotFontSel() {
2179 bool ok;
2180 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2181 if (ok) {
2182 bncSettings settings;
2183 settings.setValue("font", newFont.toString());
2184 QApplication::setFont(newFont);
2185 int ww = QFontMetrics(newFont).width('w');
2186 setMinimumSize(60*ww, 80*ww);
2187 resize(60*ww, 80*ww);
2188 }
2189}
2190
2191// Whats This Help
2192void bncWindow::slotWhatsThis() {
2193 QWhatsThis::enterWhatsThisMode();
2194}
2195
2196//
2197////////////////////////////////////////////////////////////////////////////
2198void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2199 _threads = threads;
2200
2201 _bncFigure->updateMountPoints();
2202 _bncFigureLate->updateMountPoints();
2203
2204 populateMountPointsTable();
2205 bncSettings settings;
2206 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
2207 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
2208 QListIterator<bncGetThread*> iTh(threads);
2209 while (iTh.hasNext()) {
2210 bncGetThread* thread = iTh.next();
2211 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2212 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2213 "@" + _mountPointsTable->item(iRow, 1)->text() );
2214 if (url == thread->mountPoint() &&
2215 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
2216 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
2217 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
2218 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2219 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2220 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2221 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2222 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2223 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2224 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2225 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2226 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2227 disconnect(thread,
2228 SIGNAL(newPosition(bncTime, double, double, double)),
2229 _bncFigurePPP,
2230 SLOT(slotNewPosition(bncTime, double, double, double)));
2231 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2232 _bncFigurePPP,
2233 SLOT(slotNewPosition(bncTime, double, double, double)));
2234 }
2235#ifdef QT_WEBKIT
2236 if (_mapWin) {
2237 disconnect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2238 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2239 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2240 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2241 }
2242#endif
2243 break;
2244 }
2245 }
2246 }
2247}
2248
2249//
2250////////////////////////////////////////////////////////////////////////////
2251void bncWindow::CreateMenu() {
2252 // Create Menus
2253 // ------------
2254 _menuFile = menuBar()->addMenu(tr("&File"));
2255 _menuFile->addAction(_actFontSel);
2256 _menuFile->addSeparator();
2257 _menuFile->addAction(_actSaveOpt);
2258 _menuFile->addSeparator();
2259 _menuFile->addAction(_actQuit);
2260
2261 _menuHlp = menuBar()->addMenu(tr("&Help"));
2262 _menuHlp->addAction(_actHelp);
2263 _menuHlp->addAction(_actFlowchart);
2264 _menuHlp->addAction(_actAbout);
2265}
2266
2267// Toolbar
2268////////////////////////////////////////////////////////////////////////////
2269void bncWindow::AddToolbar() {
2270 QToolBar* toolBar = new QToolBar;
2271 addToolBar(Qt::BottomToolBarArea, toolBar);
2272 toolBar->setMovable(false);
2273 toolBar->addAction(_actAddMountPoints);
2274 toolBar->addAction(_actDeleteMountPoints);
2275 toolBar->addAction(_actMapMountPoints);
2276 toolBar->addAction(_actStart);
2277 toolBar->addAction(_actStop);
2278 toolBar->addWidget(new QLabel(" "));
2279 toolBar->addAction(_actwhatsthis);
2280}
2281
2282// About
2283////////////////////////////////////////////////////////////////////////////
2284bncAboutDlg::bncAboutDlg(QWidget* parent) :
2285 QDialog(parent) {
2286
2287 QTextBrowser* tb = new QTextBrowser;
2288 QUrl url; url.setPath(":bncabout.html");
2289 tb->setSource(url);
2290 tb->setReadOnly(true);
2291
2292 int ww = QFontMetrics(font()).width('w');
2293 QPushButton* _closeButton = new QPushButton("Close");
2294 _closeButton->setMaximumWidth(10*ww);
2295 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2296
2297 QGridLayout* dlgLayout = new QGridLayout();
2298 QLabel* img = new QLabel();
2299 img->setPixmap(QPixmap(":ntrip-logo.png"));
2300 dlgLayout->addWidget(img, 0,0);
2301 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2302 dlgLayout->addWidget(tb,1,0,1,2);
2303 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2304
2305 setLayout(dlgLayout);
2306 resize(60*ww, 60*ww);
2307 setWindowTitle("About BNC");
2308 show();
2309}
2310
2311//
2312////////////////////////////////////////////////////////////////////////////
2313bncAboutDlg::~bncAboutDlg() {
2314};
2315
2316// Flowchart
2317////////////////////////////////////////////////////////////////////////////
2318bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2319 QDialog(parent) {
2320
2321 int ww = QFontMetrics(font()).width('w');
2322 QPushButton* _closeButton = new QPushButton("Close");
2323 _closeButton->setMaximumWidth(10*ww);
2324 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2325
2326 QGridLayout* dlgLayout = new QGridLayout();
2327 QLabel* img = new QLabel();
2328 img->setPixmap(QPixmap(":bncflowchart.png"));
2329 dlgLayout->addWidget(img, 0,0);
2330 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2331
2332 setLayout(dlgLayout);
2333 setWindowTitle("Flow Chart");
2334 show();
2335}
2336
2337//
2338////////////////////////////////////////////////////////////////////////////
2339bncFlowchartDlg::~bncFlowchartDlg() {
2340};
2341
2342// Enable/Disable Widget (and change its color)
2343////////////////////////////////////////////////////////////////////////////
2344void bncWindow::enableWidget(bool enable, QWidget* widget) {
2345 const static QPalette paletteWhite(QColor(255, 255, 255));
2346 const static QPalette paletteGray(QColor(230, 230, 230));
2347
2348 widget->setEnabled(enable);
2349 if (enable) {
2350 widget->setPalette(paletteWhite);
2351 }
2352 else {
2353 widget->setPalette(paletteGray);
2354 }
2355}
2356
2357// Bnc Text
2358////////////////////////////////////////////////////////////////////////////
2359void bncWindow::slotBncTextChanged(){
2360
2361 bool enable = true;
2362
2363 // Proxy
2364 //------
2365 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2366 enable = !_proxyHostLineEdit->text().isEmpty();
2367 enableWidget(enable, _proxyPortLineEdit);
2368 }
2369
2370 // RINEX Observations
2371 // ------------------
2372 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2373 enable = !_rnxPathLineEdit->text().isEmpty();
2374 enableWidget(enable, _rnxSamplSpinBox);
2375 enableWidget(enable, _rnxSkelLineEdit);
2376 enableWidget(enable, _rnxScrpLineEdit);
2377 enableWidget(enable, _rnxV3CheckBox);
2378 enableWidget(enable, _rnxIntrComboBox);
2379 }
2380
2381 // RINEX Ephemeris
2382 // ---------------
2383 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2384 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2385 enableWidget(enable, _ephIntrComboBox);
2386 enableWidget(enable, _ephV3CheckBox);
2387 }
2388
2389 // Broadcast Corrections
2390 // ---------------------
2391 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2392 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2393 enableWidget(enable, _corrIntrComboBox);
2394 }
2395
2396 // Feed Engine
2397 // -----------
2398 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2399 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2400 enableWidget(enable, _waitTimeSpinBox);
2401 enableWidget(enable, _binSamplSpinBox);
2402 }
2403
2404 // Serial Output
2405 // -------------
2406 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2407 sender() == _serialAutoNMEAComboBox) {
2408 enable = !_serialMountPointLineEdit->text().isEmpty();
2409 enableWidget(enable, _serialPortNameLineEdit);
2410 enableWidget(enable, _serialBaudRateComboBox);
2411 enableWidget(enable, _serialParityComboBox);
2412 enableWidget(enable, _serialDataBitsComboBox);
2413 enableWidget(enable, _serialStopBitsComboBox);
2414 enableWidget(enable, _serialFlowControlComboBox);
2415 enableWidget(enable, _serialAutoNMEAComboBox);
2416
2417 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() != "Auto";
2418 enableWidget(enable2, _serialFileNMEALineEdit);
2419 }
2420
2421 // Outages
2422 // -------
2423 if (sender() == 0 || sender() == _obsRateComboBox) {
2424 enable = !_obsRateComboBox->currentText().isEmpty();
2425 enableWidget(enable, _adviseFailSpinBox);
2426 enableWidget(enable, _adviseRecoSpinBox);
2427 enableWidget(enable, _adviseScriptLineEdit);
2428 }
2429
2430 // Miscellaneous
2431 // -------------
2432 if (sender() == 0 || sender() == _miscMountLineEdit) {
2433 enable = !_miscMountLineEdit->text().isEmpty();
2434 enableWidget(enable, _perfIntrComboBox);
2435 enableWidget(enable, _scanRTCMCheckBox);
2436 }
2437
2438 // Enable/disable Broadcast Ephemerides
2439 // ------------------------------------
2440 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2441 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2442 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2443 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2444 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2445 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2446 _uploadEphPortLineEdit->setEnabled(true);
2447 _uploadEphMountpointLineEdit->setEnabled(true);
2448 _uploadEphPasswordLineEdit->setEnabled(true);
2449 _uploadEphSampleSpinBox->setEnabled(true);
2450 }
2451 else {
2452 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2453 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2454 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2455 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2456 _uploadEphPortLineEdit->setEnabled(false);
2457 _uploadEphMountpointLineEdit->setEnabled(false);
2458 _uploadEphPasswordLineEdit->setEnabled(false);
2459 _uploadEphSampleSpinBox->setEnabled(false);
2460 }
2461 }
2462
2463 // Combine Corrections
2464 // -------------------
2465 if (sender() == 0 || sender() == _cmbTable) {
2466 int iRow = _cmbTable->rowCount();
2467 if (iRow > 0) {
2468 enableWidget(true, _cmbMethodComboBox);
2469 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2470 _cmbMaxresLineEdit->setEnabled(true);
2471 _cmbSamplSpinBox->setEnabled(true);
2472 }
2473 else {
2474 enableWidget(false, _cmbMethodComboBox);
2475 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2476 _cmbMaxresLineEdit->setEnabled(false);
2477 _cmbSamplSpinBox->setEnabled(false);
2478 }
2479 }
2480
2481 // Upload(clk)
2482 // -----------
2483 int iRow = _uploadTable->rowCount();
2484 if (iRow > 0) {
2485 enableWidget(true, _uploadIntrComboBox);
2486 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2487 enableWidget(true, _uploadSamplClkRnxSpinBox);
2488 enableWidget(true, _uploadSamplSp3SpinBox);
2489 }
2490 else {
2491 enableWidget(false, _uploadIntrComboBox);
2492 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2493 enableWidget(false, _uploadSamplClkRnxSpinBox);
2494 enableWidget(false, _uploadSamplSp3SpinBox);
2495 }
2496
2497 // PPP Client
2498 // ----------
2499 if (sender() == 0
2500 || sender() == _pppMountLineEdit
2501 || sender() == _pppCorrMountLineEdit
2502 || sender() == _pppRefCrdXLineEdit
2503 || sender() == _pppRefCrdYLineEdit
2504 || sender() == _pppRefCrdZLineEdit
2505 || sender() == _pppRefdNLineEdit
2506 || sender() == _pppRefdELineEdit
2507 || sender() == _pppRefdULineEdit
2508 || sender() == _pppSync
2509 || sender() == _pppSPPComboBox
2510 || sender() == _pppQuickStartLineEdit
2511 || sender() == _pppEstTropoCheckBox
2512 || sender() == _pppUsePhaseCheckBox
2513 || sender() == _pppAntexFileChooser
2514 || sender() == _mapWin) {
2515
2516 enable = !_pppSPPComboBox->currentText().isEmpty();
2517 if (enable) {
2518 enable = (!_pppMountLineEdit->text().isEmpty() && !_pppCorrMountLineEdit->text().isEmpty()) ||
2519 (!_pppMountLineEdit->text().isEmpty() && _pppSPPComboBox->currentText() == "Realtime-SPP") ||
2520 (_pppSPPComboBox->currentText() == "Post-Processing");
2521 }
2522
2523 enableWidget(enable, _pppNMEALineEdit);
2524 enableWidget(enable, _pppNMEAPortLineEdit);
2525 enableWidget(enable, _pppRefCrdXLineEdit);
2526 enableWidget(enable, _pppRefCrdYLineEdit);
2527 enableWidget(enable, _pppRefCrdZLineEdit);
2528 enableWidget(enable, _pppRefdNLineEdit);
2529 enableWidget(enable, _pppRefdELineEdit);
2530 enableWidget(enable, _pppRefdULineEdit);
2531 enableWidget(enable, _pppUsePhaseCheckBox);
2532 enableWidget(enable, _pppPlotCoordinates);
2533 enableWidget(enable, _mapWinButton);
2534 enableWidget(enable, _gmRadioButton);
2535 enableWidget(enable, _osmRadioButton);
2536 enableWidget(enable, _mapWinTraceCheckBox);
2537 enableWidget(enable, _pppEstTropoCheckBox);
2538// enableWidget(enable, _pppGLONASSCheckBox);
2539 enableWidget(enable, _pppGalileoCheckBox);
2540// enableWidget(enable, _pppAntexFileChooser);
2541 enableWidget(enable, _pppSigCLineEdit);
2542 enableWidget(enable, _pppSigCrd0);
2543 enableWidget(enable, _pppSigCrdP);
2544
2545 bool enable2 = enable && !_pppRefCrdXLineEdit->text().isEmpty() &&
2546 !_pppRefCrdYLineEdit->text().isEmpty() &&
2547 !_pppRefCrdZLineEdit->text().isEmpty();
2548
2549 enableWidget(enable2, _pppAverageLineEdit);
2550 enableWidget(enable2, _pppQuickStartLineEdit);
2551
2552 bool enable3 = enable2 && !_pppQuickStartLineEdit->text().isEmpty();
2553 enableWidget(enable3, _pppMaxSolGapLineEdit);
2554 enableWidget(enable3, _pppAudioResponseLineEdit);
2555
2556 bool enable4 = enable && !_pppAntexFileChooser->fileName().isEmpty();
2557 enableWidget(enable4, _pppAntennaLineEdit);
2558
2559 bool enable5 = enable && _pppEstTropoCheckBox->isChecked();
2560 enableWidget(enable5, _pppSigTrp0);
2561 enableWidget(enable5, _pppSigTrpP);
2562
2563 bool enable6 = enable && _pppUsePhaseCheckBox->isChecked();
2564 enableWidget(enable6, _pppSigPLineEdit);
2565
2566 bool enable7 = enable && _pppSPPComboBox->currentText() == "Realtime-PPP";
2567 enableWidget(enable7, _pppSync);
2568
2569 bool enable8 = _pppSPPComboBox->currentText() == "Realtime-PPP";
2570 enableWidget(enable8, _pppCorrMountLineEdit);
2571
2572 bool enable9 = _pppSPPComboBox->currentText() == "Post-Processing";
2573 enableWidget(enable9, _postObsFileChooser);
2574 enableWidget(enable9, _postNavFileChooser);
2575 enableWidget(enable9, _postCorrFileChooser);
2576 enableWidget(enable9, _postOutLineEdit);
2577 enableWidget(enable9, _mapSpeedSlider);
2578
2579 bool enable10 = !_pppSPPComboBox->currentText().isEmpty() && !enable9;
2580 enableWidget(enable10, _pppMountLineEdit);
2581 }
2582
2583 if (sender() == 0 || sender() == _reqcActionComboBox) {
2584 enable = !_reqcActionComboBox->currentText().isEmpty();
2585 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2586 enableWidget(enable && enable10, _reqcEditOptionButton);
2587 enableWidget(enable, _reqcObsFileChooser);
2588 enableWidget(enable, _reqcNavFileChooser);
2589 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2590 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2591 enableWidget(enable, _reqcOutLogLineEdit);
2592 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2593 enableWidget(enable && !enable10, _reqcSkyPlotSystems);
2594 }
2595
2596 enableStartStop();
2597}
2598
2599//
2600////////////////////////////////////////////////////////////////////////////
2601void bncWindow::slotAddCmbRow() {
2602 int iRow = _cmbTable->rowCount();
2603 _cmbTable->insertRow(iRow);
2604 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2605 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2606 }
2607}
2608
2609//
2610////////////////////////////////////////////////////////////////////////////
2611void bncWindow::slotDelCmbRow() {
2612 int nRows = _cmbTable->rowCount();
2613 bool flg[nRows];
2614 for (int iRow = 0; iRow < nRows; iRow++) {
2615 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2616 flg[iRow] = true;
2617 }
2618 else {
2619 flg[iRow] = false;
2620 }
2621 }
2622 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2623 if (flg[iRow]) {
2624 _cmbTable->removeRow(iRow);
2625 }
2626 }
2627 nRows = _cmbTable->rowCount();
2628 if (nRows < 1) {
2629 enableWidget(false, _cmbMethodComboBox);
2630 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2631 _cmbMaxresLineEdit->setEnabled(false);
2632 _cmbSamplSpinBox->setEnabled(false);
2633 }
2634}
2635
2636//
2637////////////////////////////////////////////////////////////////////////////
2638void bncWindow::populateCmbTable() {
2639
2640 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2641 _cmbTable->removeRow(iRow);
2642 }
2643
2644 bncSettings settings;
2645
2646 int iRow = -1;
2647 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2648 while (it.hasNext()) {
2649 QStringList hlp = it.next().split(" ");
2650 if (hlp.size() > 2) {
2651 ++iRow;
2652 _cmbTable->insertRow(iRow);
2653 }
2654 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2655 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2656 }
2657 }
2658}
2659
2660//
2661////////////////////////////////////////////////////////////////////////////
2662void bncWindow::slotAddUploadRow() {
2663 int iRow = _uploadTable->rowCount();
2664 _uploadTable->insertRow(iRow);
2665 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2666 if (iCol == 3) {
2667 QLineEdit* passwd = new QLineEdit();
2668 passwd->setFrame(false);
2669 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2670 _uploadTable->setCellWidget(iRow, iCol, passwd);
2671 }
2672 else if (iCol == 4) {
2673 QComboBox* system = new QComboBox();
2674 system->setEditable(false);
2675 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2676 system->setFrame(false);
2677 _uploadTable->setCellWidget(iRow, iCol, system);
2678 }
2679 else if (iCol == 5) {
2680 QCheckBox* com = new QCheckBox();
2681 _uploadTable->setCellWidget(iRow, iCol, com);
2682 }
2683 else if (iCol == 11) {
2684 bncTableItem* bncIt = new bncTableItem();
2685 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2686 _uploadTable->setItem(iRow, iCol, bncIt);
2687 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2688 }
2689 else {
2690 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2691 }
2692 }
2693}
2694
2695//
2696////////////////////////////////////////////////////////////////////////////
2697void bncWindow::slotDelUploadRow() {
2698 BNC_CORE->_uploadTableItems.clear();
2699 int nRows = _uploadTable->rowCount();
2700 bool flg[nRows];
2701 for (int iRow = 0; iRow < nRows; iRow++) {
2702 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2703 flg[iRow] = true;
2704 }
2705 else {
2706 flg[iRow] = false;
2707 }
2708 }
2709 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2710 if (flg[iRow]) {
2711 _uploadTable->removeRow(iRow);
2712 }
2713 }
2714 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2715 BNC_CORE->_uploadTableItems[iRow] =
2716 (bncTableItem*) _uploadTable->item(iRow, 11);
2717 }
2718 nRows = _uploadTable->rowCount();
2719 if (nRows < 1) {
2720 enableWidget(false, _uploadIntrComboBox);
2721 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2722 enableWidget(false, _uploadSamplSp3SpinBox);
2723 enableWidget(false, _uploadSamplClkRnxSpinBox);
2724 }
2725}
2726
2727//
2728////////////////////////////////////////////////////////////////////////////
2729void bncWindow::populateUploadTable() {
2730 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2731 _uploadTable->removeRow(iRow);
2732 }
2733
2734 bncSettings settings;
2735
2736 int iRow = -1;
2737 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2738 while (it.hasNext()) {
2739 QStringList hlp = it.next().split(",");
2740 if (hlp.size() > 6) {
2741 ++iRow;
2742 _uploadTable->insertRow(iRow);
2743 }
2744 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2745 if (iCol == 3) {
2746 QLineEdit* passwd = new QLineEdit();
2747 passwd->setFrame(false);
2748 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2749 passwd->setText(hlp[iCol]);
2750 _uploadTable->setCellWidget(iRow, iCol, passwd);
2751 }
2752 else if (iCol == 4) {
2753 QComboBox* system = new QComboBox();
2754 system->setEditable(false);
2755 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2756 system->setFrame(false);
2757 system->setCurrentIndex(system->findText(hlp[iCol]));
2758 _uploadTable->setCellWidget(iRow, iCol, system);
2759 }
2760 else if (iCol == 5) {
2761 QCheckBox* com = new QCheckBox();
2762 if (hlp[iCol].toInt() == Qt::Checked) {
2763 com->setCheckState(Qt::Checked);
2764 }
2765 _uploadTable->setCellWidget(iRow, iCol, com);
2766 }
2767 else if (iCol == 11) {
2768 bncTableItem* bncIt = new bncTableItem();
2769 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2770 _uploadTable->setItem(iRow, iCol, bncIt);
2771 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2772 }
2773 else {
2774 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2775 }
2776 }
2777 }
2778}
2779
2780//
2781////////////////////////////////////////////////////////////////////////////
2782void bncWindow::slotSetUploadTrafo() {
2783 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2784 dlg->exec();
2785 delete dlg;
2786}
2787
2788// Start Post-Processing PPP
2789////////////////////////////////////////////////////////////////////////////
2790void bncWindow::startPostProcessingPPP() {
2791#ifdef USE_POSTPROCESSING
2792 _runningPostProcessingPPP = true;
2793 _actStart->setText("0 Epochs");
2794 enableStartStop();
2795
2796 _postProcessing = new t_postProcessing(this, _mapSpeedSlider->maximum(), _mapSpeedSlider->value());
2797 connect(_postProcessing, SIGNAL(finished()), this, SLOT(slotFinishedPostProcessingPPP()));
2798 connect(_postProcessing, SIGNAL(progress(int)), this, SLOT(slotPostProgress(int)));
2799 connect(_mapSpeedSlider, SIGNAL(valueChanged(int)), _postProcessing, SLOT(slotSetSpeed(int)));
2800 bncSettings settings;
2801 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2802 _bncFigurePPP->reset();
2803 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2804 _bncFigurePPP, SLOT(slotNewPosition(bncTime, double, double, double)));
2805 }
2806#ifdef QT_WEBKIT
2807 if (_mapWin) {
2808 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2809 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2810 }
2811#endif
2812
2813 _postProcessing->start();
2814#else
2815 QMessageBox::information(this, "Information",
2816 "Post-Processing Not Permitted");
2817#endif
2818}
2819
2820// Post-Processing PPP Finished
2821////////////////////////////////////////////////////////////////////////////
2822void bncWindow::slotFinishedPostProcessingPPP() {
2823#ifdef QT_WEBKIT
2824 if (_mapWin) {
2825 _postProcessing->disconnect(_mapWin);
2826 }
2827#endif
2828 _runningPostProcessingPPP = false;
2829 delete _postProcessing;
2830 _postProcessing = 0;
2831 QMessageBox::information(this, "Information",
2832 "Post-Processing Thread Finished");
2833 _actStart->setText("Start");
2834 enableStartStop();
2835}
2836
2837// Progress Bar Change
2838////////////////////////////////////////////////////////////////////////////
2839void bncWindow::slotPostProgress(int nEpo) {
2840 if (_actStart) {
2841 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2842 }
2843}
2844
2845// Start Post-Processing Reqc
2846////////////////////////////////////////////////////////////////////////////
2847void bncWindow::startPostProcessingReqc() {
2848#ifdef USE_POSTPROCESSING
2849 _runningPostProcessingReqc = true;
2850 enableStartStop();
2851 if (_reqcActionComboBox->currentText() == "Analyze") {
2852 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2853 connect(reqcAnalyze, SIGNAL(finished()),
2854 this, SLOT(slotFinishedPostProcessingReqc()));
2855 reqcAnalyze->start();
2856 }
2857 else {
2858 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2859 connect(reqcEdit, SIGNAL(finished()),
2860 this, SLOT(slotFinishedPostProcessingReqc()));
2861 reqcEdit->start();
2862 }
2863#else
2864 QMessageBox::information(this, "Information",
2865 "Post-Processing Not Permitted");
2866#endif
2867}
2868
2869// Post-Processing Reqc Finished
2870////////////////////////////////////////////////////////////////////////////
2871void bncWindow::slotFinishedPostProcessingReqc() {
2872 _runningPostProcessingReqc = false;
2873 if (_reqcActionComboBox->currentText() != "Analyze") {
2874 QMessageBox::information(this, "Information",
2875 "RINEX Processing Thread Finished");
2876 }
2877 enableStartStop();
2878}
2879
2880// Edit teqc-like editing options
2881////////////////////////////////////////////////////////////////////////////
2882void bncWindow::slotReqcEditOption() {
2883 reqcDlg* dlg = new reqcDlg(this);
2884 dlg->move(this->pos().x()+50, this->pos().y()+50);
2885 dlg->exec();
2886 delete dlg;
2887}
2888
2889// Enable/Disable Start and Stop Buttons
2890////////////////////////////////////////////////////////////////////////////
2891void bncWindow::enableStartStop() {
2892
2893 if ( _pppSPPComboBox && _pppSPPComboBox->currentText() == "Post-Processing" ) {
2894 if (_runningPostProcessingPPP) {
2895 _actStart->setEnabled(false);
2896 }
2897 else {
2898 _actStart->setEnabled(true);
2899 }
2900 _actStop->setEnabled(false);
2901 }
2902 else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
2903 if (_runningPostProcessingReqc) {
2904 _actStart->setEnabled(false);
2905 }
2906 else {
2907 _actStart->setEnabled(true);
2908 }
2909 _actStop->setEnabled(false);
2910 }
2911 else {
2912 if (_runningRealTime) {
2913 _actStart->setEnabled(false);
2914 _actStop->setEnabled(true);
2915 }
2916 else {
2917 _actStop->setEnabled(false);
2918 if (_mountPointsTable->rowCount() == 0) {
2919 _actStart->setEnabled(false);
2920 }
2921 else {
2922 _actStart->setEnabled(true);
2923 }
2924 }
2925 }
2926}
2927
2928// Show Map
2929////////////////////////////////////////////////////////////////////////////
2930void bncWindow::slotMapMountPoints() {
2931 saveOptions();
2932 t_bncMap* bncMap = new t_bncMap(this);
2933 bncMap->setMinimumSize(800, 600);
2934 bncMap->setWindowTitle("Selected Mountpoints");
2935
2936 bncSettings settings;
2937 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2938 while (it.hasNext()) {
2939 QStringList hlp = it.next().split(" ");
2940 if (hlp.size() < 5) continue;
2941 QUrl url(hlp[0]);
2942 double latDeg = hlp[2].toDouble();
2943 double lonDeg = hlp[3].toDouble();
2944 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2945 }
2946
2947 bncMap->show();
2948}
2949
2950// Show Map
2951////////////////////////////////////////////////////////////////////////////
2952void bncWindow::slotMapPPP() {
2953#ifdef QT_WEBKIT
2954 saveOptions();
2955 enableWidget(false, _mapWinButton);
2956 enableWidget(false, _gmRadioButton);
2957 enableWidget(false, _osmRadioButton);
2958 enableWidget(false, _mapWinTraceCheckBox);
2959 if (!_mapWin) {
2960 _mapWin = new bncMapWin(this);
2961 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2962 QListIterator<bncGetThread*> it(_threads);
2963 while (it.hasNext()) {
2964 bncGetThread* thread = it.next();
2965 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2966 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2967 }
2968 if (_postProcessing) {
2969 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2970 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2971 }
2972 }
2973 _mapWin->show();
2974#else
2975 QMessageBox::information(this, "Information",
2976 "Qt Library compiled without QtWebKit");
2977#endif
2978}
2979
2980// Show Map
2981////////////////////////////////////////////////////////////////////////////
2982void bncWindow::slotMapPPPClosed() {
2983#ifdef QT_WEBKIT
2984 slotBncTextChanged();
2985 if (_mapWin) {
2986 QListIterator<bncGetThread*> it(_threads);
2987 while (it.hasNext()) {
2988 bncGetThread* thread = it.next();
2989 thread->disconnect(_mapWin);
2990 }
2991 if (_postProcessing) {
2992 _postProcessing->disconnect(_mapWin);
2993 }
2994 _mapWin->deleteLater();
2995 _mapWin = 0;
2996 }
2997#endif
2998}
Note: See TracBrowser for help on using the repository browser.