source: ntrip/trunk/BNC/src/bncwindow.cpp@ 5236

Last change on this file since 5236 was 5236, checked in by mervart, 9 years ago
File size: 153.3 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#ifdef QT_WEBKIT
67# include "map/bncmapwin.h"
68#endif
69#ifdef USE_POSTPROCESSING
70# include "rinex/bncpostprocess.h"
71# include "rinex/reqcedit.h"
72# include "rinex/reqcanalyze.h"
73#endif
74
75using namespace std;
76
77#ifdef GNSSCENTER_PLUGIN
78Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
79#endif
80
81// Constructor
82////////////////////////////////////////////////////////////////////////////
83bncWindow::bncWindow() {
84
85#ifdef GNSSCENTER_PLUGIN
86 BNC_CORE->setConfFileName("");
87#endif
88
89 _caster = 0;
90 _casterEph = 0;
91
92 _bncFigure = new bncFigure(this);
93 _bncFigureLate = new bncFigureLate(this);
94 _bncFigurePPP = new bncFigurePPP(this);
95 _runningRealTime = false;
96 _runningPostProcessingPPP = false;
97 _runningPostProcessingReqc = false;
98 _postProcessing = 0;
99
100 _pppSPPComboBox = 0; // necessary for enableStartStop()
101 _reqcActionComboBox = 0; // necessary for enableStartStop()
102
103 _mapWin = 0;
104
105 int ww = QFontMetrics(this->font()).width('w');
106
107 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
108
109 setMinimumSize(85*ww, 65*ww);
110
111 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
112
113 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
114 this, SLOT(slotWindowMessage(QByteArray,bool)));
115
116 // Create Actions
117 // --------------
118 _actHelp = new QAction(tr("&Help Contents"),this);
119 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
120
121 _actAbout = new QAction(tr("&About BNC"),this);
122 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
123
124 _actFlowchart = new QAction(tr("&Flow Chart"),this);
125 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
126
127 _actFontSel = new QAction(tr("Select &Font"),this);
128 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
129
130 _actSaveOpt = new QAction(tr("&Save && Reread Configuration"),this);
131 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
132
133 _actQuit = new QAction(tr("&Quit"),this);
134 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
135
136 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
137 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
138
139 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
140 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
141 _actDeleteMountPoints->setEnabled(false);
142
143 _actMapMountPoints = new QAction(tr("Streams &Map"),this);
144 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
145
146 _actStart = new QAction(tr("Sta&rt"),this);
147 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
148
149 _actStop = new QAction(tr("Sto&p"),this);
150 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
151
152 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
153 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
154
155 CreateMenu();
156 AddToolbar();
157
158 bncSettings settings;
159
160 // Network Options
161 // ---------------
162 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
163 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
164
165 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
166 this, SLOT(slotBncTextChanged()));
167
168 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
169 _ignoreSslErrorsCheckBox = new QCheckBox();
170 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
171 settings.value("ignoreSslErrors").toInt()));
172
173 // General Options
174 // ---------------
175 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
176 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
177 _rnxAppendCheckBox = new QCheckBox();
178 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
179 settings.value("rnxAppend").toInt()));
180 _onTheFlyComboBox = new QComboBox();
181 _onTheFlyComboBox->setEditable(false);
182 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
183 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
184 if (ii != -1) {
185 _onTheFlyComboBox->setCurrentIndex(ii);
186 }
187 _autoStartCheckBox = new QCheckBox();
188 _autoStartCheckBox->setCheckState(Qt::CheckState(
189 settings.value("autoStart").toInt()));
190
191 // RINEX Observations Options
192 // --------------------------
193 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
194 _rnxIntrComboBox = new QComboBox();
195 _rnxIntrComboBox->setEditable(false);
196 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
197 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
198 if (ii != -1) {
199 _rnxIntrComboBox->setCurrentIndex(ii);
200 }
201 _rnxSamplSpinBox = new QSpinBox();
202 _rnxSamplSpinBox->setMinimum(0);
203 _rnxSamplSpinBox->setMaximum(60);
204 _rnxSamplSpinBox->setSingleStep(5);
205 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
206 _rnxSamplSpinBox->setSuffix(" sec");
207 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
208 _rnxSkelLineEdit->setMaximumWidth(5*ww);
209 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
210 _rnxV3CheckBox = new QCheckBox();
211 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
212
213 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
214 this, SLOT(slotBncTextChanged()));
215
216 // RINEX Ephemeris Options
217 // -----------------------
218 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
219 _ephIntrComboBox = new QComboBox();
220 _ephIntrComboBox->setEditable(false);
221 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
222 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
223 if (jj != -1) {
224 _ephIntrComboBox->setCurrentIndex(jj);
225 }
226 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
227 _ephV3CheckBox = new QCheckBox();
228 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
229
230 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
231 this, SLOT(slotBncTextChanged()));
232
233 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
234 this, SLOT(slotBncTextChanged()));
235
236 // Broadcast Corrections Options
237 // -----------------------------
238 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
239 _corrIntrComboBox = new QComboBox();
240 _corrIntrComboBox->setEditable(false);
241 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
242 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
243 if (mm != -1) {
244 _corrIntrComboBox->setCurrentIndex(mm);
245 }
246 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
247 _corrTimeSpinBox = new QSpinBox();
248 _corrTimeSpinBox->setMinimum(0);
249 _corrTimeSpinBox->setMaximum(60);
250 _corrTimeSpinBox->setSingleStep(1);
251 _corrTimeSpinBox->setSuffix(" sec");
252 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
253
254 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
255 this, SLOT(slotBncTextChanged()));
256
257 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
258 this, SLOT(slotBncTextChanged()));
259
260 // Feed Engine Options
261 // -------------------
262 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
263 _waitTimeSpinBox = new QSpinBox();
264 _waitTimeSpinBox->setMinimum(1);
265 _waitTimeSpinBox->setMaximum(30);
266 _waitTimeSpinBox->setSingleStep(1);
267 _waitTimeSpinBox->setSuffix(" sec");
268 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
269 _binSamplSpinBox = new QSpinBox();
270 _binSamplSpinBox->setMinimum(0);
271 _binSamplSpinBox->setMaximum(60);
272 _binSamplSpinBox->setSingleStep(5);
273 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
274 _binSamplSpinBox->setSuffix(" sec");
275 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
276 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
277
278 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
279 this, SLOT(slotBncTextChanged()));
280
281 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
282 this, SLOT(slotBncTextChanged()));
283
284 // Serial Output Options
285 // ---------------------
286 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
287 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
288 _serialBaudRateComboBox = new QComboBox();
289 _serialBaudRateComboBox->addItems(QString("110,300,600,"
290 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
291 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
292 if (kk != -1) {
293 _serialBaudRateComboBox->setCurrentIndex(kk);
294 }
295 _serialFlowControlComboBox = new QComboBox();
296 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
297 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
298 if (kk != -1) {
299 _serialFlowControlComboBox->setCurrentIndex(kk);
300 }
301 _serialDataBitsComboBox = new QComboBox();
302 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
303 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
304 if (kk != -1) {
305 _serialDataBitsComboBox->setCurrentIndex(kk);
306 }
307 _serialParityComboBox = new QComboBox();
308 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
309 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
310 if (kk != -1) {
311 _serialParityComboBox->setCurrentIndex(kk);
312 }
313 _serialStopBitsComboBox = new QComboBox();
314 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
315 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
316 if (kk != -1) {
317 _serialStopBitsComboBox->setCurrentIndex(kk);
318 }
319 _serialAutoNMEAComboBox = new QComboBox();
320 _serialAutoNMEAComboBox->addItems(QString("Auto,Manual").split(","));
321 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
322 if (kk != -1) {
323 _serialAutoNMEAComboBox->setCurrentIndex(kk);
324 }
325 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
326 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
327
328 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
329 this, SLOT(slotBncTextChanged()));
330
331 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
332 this, SLOT(slotBncTextChanged()));
333
334 // Outages Options
335 // ---------------
336 _obsRateComboBox = new QComboBox();
337 _obsRateComboBox->setEditable(false);
338 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
339 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
340 if (kk != -1) {
341 _obsRateComboBox->setCurrentIndex(kk);
342 }
343 _adviseFailSpinBox = new QSpinBox();
344 _adviseFailSpinBox->setMinimum(0);
345 _adviseFailSpinBox->setMaximum(60);
346 _adviseFailSpinBox->setSingleStep(1);
347 _adviseFailSpinBox->setSuffix(" min");
348 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
349 _adviseRecoSpinBox = new QSpinBox();
350 _adviseRecoSpinBox->setMinimum(0);
351 _adviseRecoSpinBox->setMaximum(60);
352 _adviseRecoSpinBox->setSingleStep(1);
353 _adviseRecoSpinBox->setSuffix(" min");
354 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
355 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
356
357 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
358 this, SLOT(slotBncTextChanged()));
359
360 // Miscellaneous Options
361 // ---------------------
362 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
363 _perfIntrComboBox = new QComboBox();
364 _perfIntrComboBox->setEditable(false);
365 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
366 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
367 if (ll != -1) {
368 _perfIntrComboBox->setCurrentIndex(ll);
369 }
370 _scanRTCMCheckBox = new QCheckBox();
371 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
372 settings.value("scanRTCM").toInt()));
373
374 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
375 this, SLOT(slotBncTextChanged()));
376
377 // PPP Options
378 // -----------
379 _pppMountLineEdit = new QLineEdit(settings.value("pppMount").toString());
380 _pppMountLineEdit->setMaximumWidth(8*ww);
381 _pppCorrMountLineEdit = new QLineEdit(settings.value("pppCorrMount").toString());
382 _pppMountLineEdit->setMinimumWidth(8*ww);
383 _pppCorrMountLineEdit->setMinimumWidth(8*ww);
384 _pppCorrMountLineEdit->setMaximumWidth(8*ww);
385 _pppNMEALineEdit = new QLineEdit(settings.value("nmeaFile").toString());
386 _pppNMEALineEdit->setMinimumWidth(15*ww);
387 _pppNMEAPortLineEdit = new QLineEdit(settings.value("nmeaPort").toString());
388 _pppNMEAPortLineEdit->setMaximumWidth(8*ww);
389 _pppNMEAPortLineEdit->setMinimumWidth(8*ww);
390 _pppSigCLineEdit = new QLineEdit(settings.value("pppSigmaCode").toString());
391 _pppSigPLineEdit = new QLineEdit(settings.value("pppSigmaPhase").toString());
392 _pppSigCrd0 = new QLineEdit(settings.value("pppSigCrd0").toString());
393 _pppSigCrdP = new QLineEdit(settings.value("pppSigCrdP").toString());
394 _pppSigTrp0 = new QLineEdit(settings.value("pppSigTrp0").toString());
395 _pppSigTrpP = new QLineEdit(settings.value("pppSigTrpP").toString());
396 _pppAverageLineEdit = new QLineEdit(settings.value("pppAverage").toString());
397 _pppQuickStartLineEdit = new QLineEdit(settings.value("pppQuickStart").toString());
398 _pppMaxSolGapLineEdit = new QLineEdit(settings.value("pppMaxSolGap").toString());
399 _pppAudioResponseLineEdit = new QLineEdit(settings.value("pppAudioResponse").toString());
400 _pppRefCrdXLineEdit = new QLineEdit(settings.value("pppRefCrdX").toString());
401 _pppRefCrdYLineEdit = new QLineEdit(settings.value("pppRefCrdY").toString());
402 _pppRefCrdZLineEdit = new QLineEdit(settings.value("pppRefCrdZ").toString());
403 _pppRefdNLineEdit = new QLineEdit(settings.value("pppRefdN").toString());
404 _pppRefdELineEdit = new QLineEdit(settings.value("pppRefdE").toString());
405 _pppRefdULineEdit = new QLineEdit(settings.value("pppRefdU").toString());
406 _pppSync = new QLineEdit(settings.value("pppSync").toString());
407 _pppAntexFileChooser = new qtFileChooser;
408 _pppAntexFileChooser->setMinimumWidth(12*ww);
409 _pppAntennaLineEdit = new QLineEdit(settings.value("pppAntenna").toString());
410 _pppAntexFileChooser->setFileName(settings.value("pppAntex").toString());
411
412 _pppSPPComboBox = new QComboBox();
413 _pppSPPComboBox->setEditable(false);
414 _pppSPPComboBox->addItems(QString(",Realtime-PPP,Realtime-SPP,Post-Processing").split(","));
415 int ik = _pppSPPComboBox->findText(settings.value("pppSPP").toString());
416 if (ik != -1) {
417 _pppSPPComboBox->setCurrentIndex(ik);
418 }
419 _pppUsePhaseCheckBox = new QCheckBox();
420 _pppUsePhaseCheckBox->setCheckState(Qt::CheckState(
421 settings.value("pppUsePhase").toInt()));
422 _pppEstTropoCheckBox = new QCheckBox();
423 _pppEstTropoCheckBox->setCheckState(Qt::CheckState(
424 settings.value("pppEstTropo").toInt()));
425 _pppGLONASSCheckBox = new QCheckBox();
426 _pppGLONASSCheckBox->setCheckState(Qt::CheckState(
427 settings.value("pppGLONASS").toInt()));
428 _pppGalileoCheckBox = new QCheckBox();
429 _pppGalileoCheckBox->setCheckState(Qt::CheckState(
430 settings.value("pppGalileo").toInt()));
431
432 connect(_pppMountLineEdit, SIGNAL(textChanged(const QString &)),
433 this, SLOT(slotBncTextChanged()));
434
435 connect(_pppCorrMountLineEdit, SIGNAL(textChanged(const QString &)),
436 this, SLOT(slotBncTextChanged()));
437
438 connect(_pppUsePhaseCheckBox, SIGNAL(stateChanged(int)),
439 this, SLOT(slotBncTextChanged()));
440
441 connect(_pppRefCrdXLineEdit, SIGNAL(textChanged(const QString &)),
442 this, SLOT(slotBncTextChanged()));
443 connect(_pppRefCrdYLineEdit, SIGNAL(textChanged(const QString &)),
444 this, SLOT(slotBncTextChanged()));
445 connect(_pppRefCrdZLineEdit, SIGNAL(textChanged(const QString &)),
446 this, SLOT(slotBncTextChanged()));
447 connect(_pppRefdNLineEdit, SIGNAL(textChanged(const QString &)),
448 this, SLOT(slotBncTextChanged()));
449 connect(_pppRefdELineEdit, SIGNAL(textChanged(const QString &)),
450 this, SLOT(slotBncTextChanged()));
451 connect(_pppRefdULineEdit, SIGNAL(textChanged(const QString &)),
452 this, SLOT(slotBncTextChanged()));
453
454 connect(_pppEstTropoCheckBox, SIGNAL(stateChanged(int)),
455 this, SLOT(slotBncTextChanged()));
456
457 connect(_pppSync, SIGNAL(textChanged(const QString &)),
458 this, SLOT(slotBncTextChanged()));
459
460 connect(_pppSPPComboBox, SIGNAL(currentIndexChanged(const QString &)),
461 this, SLOT(slotBncTextChanged()));
462
463 connect(_pppAntexFileChooser, SIGNAL(fileNameChanged(const QString &)),
464 this, SLOT(slotBncTextChanged()));
465
466 connect(_pppQuickStartLineEdit, SIGNAL(textChanged(const QString &)),
467 this, SLOT(slotBncTextChanged()));
468
469 // Streams
470 // -------
471 _mountPointsTable = new QTableWidget(0,8);
472
473 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
474 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
475 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
476 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
477 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
478 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
479 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
480 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
481 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
482_mountPointsTable->setHorizontalHeaderLabels(labels);
483 _mountPointsTable->setGridStyle(Qt::NoPen);
484 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
485 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
486 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
487 _mountPointsTable->hideColumn(0);
488 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
489 SLOT(slotSelectionChanged()));
490 populateMountPointsTable();
491
492 _log = new QTextBrowser();
493 _log->setReadOnly(true);
494
495 // Combine Corrections
496 // -------------------
497 _cmbTable = new QTableWidget(0,3);
498 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
499 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
500 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
501 _cmbTable->setMaximumWidth(30*ww);
502 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
503 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
504 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
505 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
506 _cmbTable->horizontalHeader()->setStretchLastSection(true);
507 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
508
509 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
510
511 _cmbSamplSpinBox = new QSpinBox;
512 _cmbSamplSpinBox->setMinimum(10);
513 _cmbSamplSpinBox->setMaximum(60);
514 _cmbSamplSpinBox->setSingleStep(10);
515 _cmbSamplSpinBox->setMaximumWidth(9*ww);
516 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
517 _cmbSamplSpinBox->setSuffix(" sec");
518
519 QPushButton* addCmbRowButton = new QPushButton("Add Row");
520 QPushButton* delCmbRowButton = new QPushButton("Delete");
521
522 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
523 SLOT(slotBncTextChanged()));
524
525 _cmbMethodComboBox = new QComboBox();
526 _cmbMethodComboBox->setEditable(false);
527 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
528 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
529 if (im != -1) {
530 _cmbMethodComboBox->setCurrentIndex(im);
531 }
532
533 int iRow = _cmbTable->rowCount();
534 if (iRow > 0) {
535 enableWidget(true, _cmbMethodComboBox);
536 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
537 _cmbMaxresLineEdit->setEnabled(true);
538 _cmbSamplSpinBox->setEnabled(true);
539 }
540 else {
541 enableWidget(false, _cmbMethodComboBox);
542 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
543 _cmbMaxresLineEdit->setEnabled(false);
544 _cmbSamplSpinBox->setEnabled(false);
545 }
546
547 // Upload Results
548 // -------------
549 _uploadTable = new QTableWidget(0,12);
550 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
551 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
552 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
553 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
554 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
555 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
556 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
557 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
558 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
559 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
560 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
561 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
562 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
563 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
564 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
565 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
566 _uploadTable->horizontalHeader()->setStretchLastSection(true);
567 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
568
569 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
570 SLOT(slotBncTextChanged()));
571
572 QPushButton* addUploadRowButton = new QPushButton("Add Row");
573 QPushButton* delUploadRowButton = new QPushButton("Del Row");
574 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
575 _uploadIntrComboBox = new QComboBox;
576 _uploadIntrComboBox->setEditable(false);
577 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
578 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
579 if (ii != -1) {
580 _uploadIntrComboBox->setCurrentIndex(ii);
581 }
582
583 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
584 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
585 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
586 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
587 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
588 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
589 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
590
591 _uploadSamplSp3SpinBox = new QSpinBox;
592 _uploadSamplSp3SpinBox->setMinimum(0);
593 _uploadSamplSp3SpinBox->setMaximum(15);
594 _uploadSamplSp3SpinBox->setSingleStep(1);
595 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
596 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
597 _uploadSamplSp3SpinBox->setSuffix(" min");
598
599 _uploadSamplClkRnxSpinBox = new QSpinBox;
600 _uploadSamplClkRnxSpinBox->setMinimum(0);
601 _uploadSamplClkRnxSpinBox->setMaximum(60);
602 _uploadSamplClkRnxSpinBox->setSingleStep(5);
603 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
604 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
605 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
606
607 int iRowT = _uploadTable->rowCount();
608 if (iRowT > 0) {
609 enableWidget(true, _uploadIntrComboBox);
610 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
611 enableWidget(true, _uploadSamplSp3SpinBox);
612 enableWidget(true, _uploadSamplClkRnxSpinBox);
613 }
614 else {
615 enableWidget(false, _uploadIntrComboBox);
616 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
617 enableWidget(false, _uploadSamplSp3SpinBox);
618 enableWidget(false, _uploadSamplClkRnxSpinBox);
619 }
620
621 // Upload RTCM3 Ephemeris
622 // ----------------------
623 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
624 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
625 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
626 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
627 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
628 _uploadEphSampleSpinBox = new QSpinBox;
629 _uploadEphSampleSpinBox->setMinimum(5);
630 _uploadEphSampleSpinBox->setMaximum(60);
631 _uploadEphSampleSpinBox->setSingleStep(5);
632 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
633 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
634 _uploadEphSampleSpinBox->setSuffix(" sec");
635 _uploadEphBytesCounter = new bncBytesCounter;
636
637 // Canvas with Editable Fields
638 // ---------------------------
639 _canvas = new QWidget;
640 setCentralWidget(_canvas);
641
642 _aogroup = new QTabWidget();
643 QWidget* pgroup = new QWidget();
644 QWidget* ggroup = new QWidget();
645 QWidget* sgroup = new QWidget();
646 QWidget* egroup = new QWidget();
647 QWidget* agroup = new QWidget();
648 QWidget* cgroup = new QWidget();
649 QWidget* ogroup = new QWidget();
650 QWidget* rgroup = new QWidget();
651 QWidget* sergroup = new QWidget();
652 QWidget* pppgroup = new QWidget();
653 QWidget* ppp2group = new QWidget();
654 QWidget* ppp3group = new QWidget();
655 QWidget* reqcgroup = new QWidget();
656 QWidget* cmbgroup = new QWidget();
657 QWidget* uploadgroup = new QWidget();
658 QWidget* uploadEphgroup = new QWidget();
659 _aogroup->addTab(pgroup,tr("Network"));
660 _aogroup->addTab(ggroup,tr("General"));
661 _aogroup->addTab(ogroup,tr("RINEX Observations"));
662 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
663 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
664 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
665 _aogroup->addTab(sgroup,tr("Feed Engine"));
666 _aogroup->addTab(sergroup,tr("Serial Output"));
667 _aogroup->addTab(agroup,tr("Outages"));
668 _aogroup->addTab(rgroup,tr("Miscellaneous"));
669 _aogroup->addTab(pppgroup,tr("PPP (1)"));
670 _aogroup->addTab(ppp2group,tr("PPP (2)"));
671 _aogroup->addTab(ppp3group,tr("PPP (3)"));
672#ifdef USE_COMBINATION
673 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
674#endif
675 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
676 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
677
678 // Log Tab
679 // -------
680 _loggroup = new QTabWidget();
681 _loggroup->addTab(_log,tr("Log"));
682 _loggroup->addTab(_bncFigure,tr("Throughput"));
683 _loggroup->addTab(_bncFigureLate,tr("Latency"));
684 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
685
686 // Netowork (Proxy and SSL) Tab
687 // ----------------------------
688 QGridLayout* pLayout = new QGridLayout;
689 pLayout->setColumnMinimumWidth(0,13*ww);
690 _proxyPortLineEdit->setMaximumWidth(9*ww);
691
692 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none."),0, 0, 1, 50);
693 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
694 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
695 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
696 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
697 pLayout->addWidget(new QLabel("Path to SSL Certificates"), 3, 0);
698 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
699 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
700 pLayout->addWidget(new QLabel("Ignore SSL Authorization Errors"), 4, 0);
701 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
702 pLayout->addWidget(new QLabel(" "), 4, 0);
703 pLayout->addWidget(new QLabel(" "), 5, 0);
704 pLayout->addWidget(new QLabel(" "), 6, 0);
705 pgroup->setLayout(pLayout);
706
707 // General Tab
708 // -----------
709 QGridLayout* gLayout = new QGridLayout;
710 gLayout->setColumnMinimumWidth(0,14*ww);
711 _onTheFlyComboBox->setMaximumWidth(9*ww);
712
713 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),0, 0, 1, 50);
714 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
715 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,30);
716 gLayout->addWidget(new QLabel("Append files"), 2, 0);
717 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
718 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
719 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
720 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
721 gLayout->addWidget(_autoStartCheckBox, 4, 1);
722 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
723 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,30);
724 gLayout->addWidget(new QLabel(" "), 6, 0);
725 ggroup->setLayout(gLayout);
726
727 // RINEX Observations
728 // ------------------
729 QGridLayout* oLayout = new QGridLayout;
730 oLayout->setColumnMinimumWidth(0,14*ww);
731 _rnxIntrComboBox->setMaximumWidth(9*ww);
732 _rnxSamplSpinBox->setMaximumWidth(9*ww);
733
734 oLayout->addWidget(new QLabel("Saving RINEX observation files."),0, 0, 1,50);
735 oLayout->addWidget(new QLabel("Directory"), 1, 0);
736 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1,24);
737 oLayout->addWidget(new QLabel("Interval"), 2, 0);
738 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
739 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
740 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
741 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
742 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, 1, 1, Qt::AlignLeft);
743 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
744 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1,24);
745 oLayout->addWidget(new QLabel("Version 3"), 5, 0);
746 oLayout->addWidget(_rnxV3CheckBox, 5, 1);
747 oLayout->addWidget(new QLabel(" "), 6, 0);
748 ogroup->setLayout(oLayout);
749
750 // RINEX Ephemeris
751 // ---------------
752 QGridLayout* eLayout = new QGridLayout;
753 eLayout->setColumnMinimumWidth(0,14*ww);
754 _ephIntrComboBox->setMaximumWidth(9*ww);
755 _outEphPortLineEdit->setMaximumWidth(9*ww);
756
757 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),0,0,1,50);
758 eLayout->addWidget(new QLabel("Directory"), 1, 0);
759 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
760 eLayout->addWidget(new QLabel("Interval"), 2, 0);
761 eLayout->addWidget(_ephIntrComboBox, 2, 1);
762 eLayout->addWidget(new QLabel("Port"), 3, 0);
763 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
764 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
765 eLayout->addWidget(_ephV3CheckBox, 4, 1);
766 eLayout->addWidget(new QLabel(" "), 5, 0);
767 eLayout->addWidget(new QLabel(" "), 6, 0);
768 egroup->setLayout(eLayout);
769
770
771 // Broadcast Corrections
772 // ---------------------
773 QGridLayout* cLayout = new QGridLayout;
774 cLayout->setColumnMinimumWidth(0,14*ww);
775 _corrIntrComboBox->setMaximumWidth(9*ww);
776 _corrPortLineEdit->setMaximumWidth(9*ww);
777 _corrTimeSpinBox->setMaximumWidth(9*ww);
778
779 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),0,0,1,50);
780 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
781 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,20);
782 cLayout->addWidget(new QLabel("Interval"), 2, 0);
783 cLayout->addWidget(_corrIntrComboBox, 2, 1);
784 cLayout->addWidget(new QLabel("Port"), 3, 0);
785 cLayout->addWidget(_corrPortLineEdit, 3, 1);
786 cLayout->addWidget(new QLabel(" Wait for full corr epoch"), 3, 2, Qt::AlignRight);
787 cLayout->addWidget(_corrTimeSpinBox, 3, 3, Qt::AlignLeft);
788 cLayout->addWidget(new QLabel(" "), 4, 0);
789 cLayout->addWidget(new QLabel(" "), 5, 0);
790 cLayout->addWidget(new QLabel(" "), 6, 0);
791 cgroup->setLayout(cLayout);
792
793 // Feed Engine
794 // -----------
795 QGridLayout* sLayout = new QGridLayout;
796 sLayout->setColumnMinimumWidth(0,14*ww);
797 _outPortLineEdit->setMaximumWidth(9*ww);
798 _waitTimeSpinBox->setMaximumWidth(9*ww);
799 _binSamplSpinBox->setMaximumWidth(9*ww);
800 _outUPortLineEdit->setMaximumWidth(9*ww);
801
802 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine."),0,0,1,50);
803 sLayout->addWidget(new QLabel("Port"), 1, 0);
804 sLayout->addWidget(_outPortLineEdit, 1, 1);
805 sLayout->addWidget(new QLabel("Wait for full obs epoch"), 1, 2, Qt::AlignRight);
806 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
807 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
808 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
809 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
810 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 20);
811 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
812 sLayout->addWidget(_outUPortLineEdit, 4, 1);
813 sLayout->addWidget(new QLabel(" "), 5, 0);
814 sLayout->addWidget(new QLabel(" "), 6, 0);
815 sgroup->setLayout(sLayout);
816
817 // Serial Output
818 // -------------
819 QGridLayout* serLayout = new QGridLayout;
820 serLayout->setColumnMinimumWidth(0,14*ww);
821 _serialBaudRateComboBox->setMaximumWidth(9*ww);
822 _serialFlowControlComboBox->setMaximumWidth(11*ww);
823 _serialDataBitsComboBox->setMaximumWidth(5*ww);
824 _serialParityComboBox->setMaximumWidth(9*ww);
825 _serialStopBitsComboBox->setMaximumWidth(5*ww);
826 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
827 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
828
829 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver."),0,0,1,30);
830 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
831 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
832 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
833 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
834 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
835 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
836 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
837 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
838 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
839 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
840 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
841 serLayout->addWidget(_serialParityComboBox, 4, 3);
842 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
843 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
844 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
845 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
846 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
847 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,15);
848 serLayout->addWidget(new QLabel("Height"), 5,20, Qt::AlignRight);
849 serLayout->addWidget(_serialHeightNMEALineEdit, 5,21, 1,11);
850 serLayout->addWidget(new QLabel(" "), 6, 0);
851
852 sergroup->setLayout(serLayout);
853
854 // Outages
855 // -------
856 QGridLayout* aLayout = new QGridLayout;
857 aLayout->setColumnMinimumWidth(0,14*ww);
858 _obsRateComboBox->setMaximumWidth(9*ww);
859 _adviseFailSpinBox->setMaximumWidth(9*ww);
860 _adviseRecoSpinBox->setMaximumWidth(9*ww);
861
862 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes."),0,0,1,50,Qt::AlignLeft);
863 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
864 aLayout->addWidget(_obsRateComboBox, 1, 1);
865 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
866 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
867 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
868 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
869 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
870 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,30);
871 aLayout->addWidget(new QLabel(" "), 5, 0);
872 aLayout->addWidget(new QLabel(" "), 6, 0);
873 agroup->setLayout(aLayout);
874
875 // Miscellaneous
876 // -------------
877 QGridLayout* rLayout = new QGridLayout;
878 rLayout->setColumnMinimumWidth(0,14*ww);
879 _perfIntrComboBox->setMaximumWidth(9*ww);
880
881 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for numbers of message types and antenna information."),0, 0,1,30);
882 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
883 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1,7);
884 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
885 rLayout->addWidget(_perfIntrComboBox, 2, 1);
886 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
887 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
888 rLayout->addWidget(new QLabel(" "), 4, 0);
889 rLayout->addWidget(new QLabel(" "), 5, 0);
890 rLayout->addWidget(new QLabel(" "), 6, 0);
891 rgroup->setLayout(rLayout);
892
893 // PPP Client
894 // ----------
895 QGridLayout* pppLayout = new QGridLayout;
896 pppLayout->setColumnMinimumWidth(0,14*ww);
897 _pppSigCLineEdit->setMaximumWidth(6*ww);
898 _pppSigPLineEdit->setMaximumWidth(6*ww);
899 _pppSigCrd0->setMaximumWidth(6*ww);
900 _pppSigCrdP->setMaximumWidth(6*ww);
901 _pppSigTrp0->setMaximumWidth(6*ww);
902 _pppSigTrpP->setMaximumWidth(6*ww);
903 _pppAverageLineEdit->setMaximumWidth(6*ww);
904 _pppQuickStartLineEdit->setMaximumWidth(6*ww);
905 _pppMaxSolGapLineEdit->setMaximumWidth(6*ww);
906 _pppAudioResponseLineEdit->setMaximumWidth(6*ww);
907 _pppRefCrdXLineEdit->setMaximumWidth(10*ww);
908 _pppRefCrdYLineEdit->setMaximumWidth(10*ww);
909 _pppRefCrdZLineEdit->setMaximumWidth(10*ww);
910 _pppRefdNLineEdit->setMaximumWidth(6*ww);
911 _pppRefdELineEdit->setMaximumWidth(6*ww);
912 _pppRefdULineEdit->setMaximumWidth(6*ww);
913 _pppSync->setMaximumWidth(6*ww);
914 _pppSPPComboBox->setMinimumWidth(15*ww);
915
916 _postObsFileChooser = new qtFileChooser;
917 _postObsFileChooser->setFileName(settings.value("postObsFile").toString());
918 _postObsFileChooser->setMinimumWidth(15*ww);
919 _postNavFileChooser = new qtFileChooser;
920 _postNavFileChooser->setFileName(settings.value("postNavFile").toString());
921 _postNavFileChooser->setMinimumWidth(15*ww);
922 _postCorrFileChooser = new qtFileChooser;
923 _postCorrFileChooser->setFileName(settings.value("postCorrFile").toString());
924 _postCorrFileChooser->setMinimumWidth(15*ww);
925 _postOutLineEdit = new QLineEdit(settings.value("postOutFile").toString());
926 _postOutLineEdit->setMinimumWidth(15*ww);
927
928 int ir = 0;
929 pppLayout->addWidget(new QLabel("Precise Point Positioning, Panel 1."), ir, 0, 1, 2, Qt::AlignLeft);
930 ++ir;
931 pppLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
932 pppLayout->addWidget(_pppSPPComboBox, ir, 1, Qt::AlignRight);
933 pppLayout->addWidget(_pppMountLineEdit, ir, 3, Qt::AlignRight);
934 pppLayout->addWidget(new QLabel("Obs."), ir, 4, Qt::AlignLeft);
935 pppLayout->addWidget(_pppCorrMountLineEdit, ir, 5, Qt::AlignRight);
936 pppLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
937 ++ir;
938 pppLayout->addWidget(new QLabel("Marker coordinates"), ir, 0, Qt::AlignLeft);
939 pppLayout->addWidget(_pppRefCrdXLineEdit, ir, 1, Qt::AlignRight);
940 pppLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
941 pppLayout->addWidget(_pppRefCrdYLineEdit, ir, 3, Qt::AlignRight);
942 pppLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
943 pppLayout->addWidget(_pppRefCrdZLineEdit, ir, 5, Qt::AlignRight);
944 pppLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
945 ++ir;
946 pppLayout->addWidget(new QLabel("Antenna excentricity"), ir, 0, Qt::AlignLeft);
947 pppLayout->addWidget(_pppRefdNLineEdit, ir, 1, Qt::AlignRight);
948 pppLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
949 pppLayout->addWidget(_pppRefdELineEdit, ir, 3, Qt::AlignRight);
950 pppLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
951 pppLayout->addWidget(_pppRefdULineEdit, ir, 5, Qt::AlignRight);
952 pppLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
953 ++ir;
954 pppLayout->addWidget(new QLabel("NMEA & plot output"),ir, 0, Qt::AlignLeft);
955 pppLayout->addWidget(_pppNMEALineEdit, ir, 1, Qt::AlignRight);
956 pppLayout->addWidget(new QLabel("NMEA File"), ir, 2, Qt::AlignLeft);
957 pppLayout->addWidget(_pppNMEAPortLineEdit, ir, 3, Qt::AlignRight);
958 pppLayout->addWidget(new QLabel("NMEA Port"), ir, 4, Qt::AlignLeft);
959 ++ir;
960 pppLayout->addWidget(new QLabel("Post-processing"), ir, 0, Qt::AlignLeft);
961 pppLayout->addWidget(_postObsFileChooser, ir, 1, Qt::AlignRight);
962 pppLayout->addWidget(new QLabel("Obs "), ir, 2, Qt::AlignLeft);
963 pppLayout->addWidget(_postNavFileChooser, ir, 3, Qt::AlignRight);
964 pppLayout->addWidget(new QLabel("Nav "), ir, 4, Qt::AlignLeft);
965 ++ir;
966 pppLayout->addWidget(_postCorrFileChooser, ir, 1, Qt::AlignRight);
967 pppLayout->addWidget(new QLabel("Corr"), ir, 2, Qt::AlignLeft);
968 pppLayout->addWidget(_postOutLineEdit, ir, 3, Qt::AlignRight);
969 pppLayout->addWidget(new QLabel("Log (full path)"), ir, 4, Qt::AlignLeft);
970
971 pppgroup->setLayout(pppLayout);
972
973 // PPP Client (second panel)
974 // -------------------------
975 QGridLayout* ppp2Layout = new QGridLayout;
976 ppp2Layout->setColumnMinimumWidth(0,14*ww);
977 ir = 0;
978 ppp2Layout->addWidget(new QLabel("Precise Point Positioning, Panel 2."), ir, 0, 1, 10);
979 ++ir;
980 ppp2Layout->addWidget(new QLabel("Antennas"), ir, 0);
981 ppp2Layout->addWidget(_pppAntexFileChooser, ir, 1,1,3);
982 ppp2Layout->addWidget(new QLabel("ANTEX File"), ir, 4);
983 ppp2Layout->addWidget(_pppAntennaLineEdit, ir, 5,1,3);
984 ppp2Layout->addWidget(new QLabel("Antenna Name"), ir, 8);
985 ++ir;
986 ppp2Layout->addWidget(new QLabel("Basics"), ir, 0, 1, 5);
987 ppp2Layout->addWidget(_pppUsePhaseCheckBox, ir, 1, Qt::AlignRight);
988 ppp2Layout->addWidget(new QLabel("Use phase obs"), ir, 2);
989 ppp2Layout->addWidget(_pppEstTropoCheckBox, ir, 3, Qt::AlignRight);
990 ppp2Layout->addWidget(new QLabel("Estimate tropo"), ir, 4);
991 ppp2Layout->addWidget(_pppGLONASSCheckBox, ir, 5, Qt::AlignRight);
992 ppp2Layout->addWidget(new QLabel("Use GLONASS"), ir, 6);
993 ppp2Layout->addWidget(_pppGalileoCheckBox, ir, 7, Qt::AlignRight);
994 ppp2Layout->addWidget(new QLabel("Use Galileo "), ir, 8);
995 ++ir;
996 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
997 ppp2Layout->addWidget(_pppSync, ir, 1);
998 ppp2Layout->addWidget(new QLabel("Sync Corr (sec) "), ir, 2);
999 ppp2Layout->addWidget(_pppAverageLineEdit, ir, 3, Qt::AlignRight);
1000 ppp2Layout->addWidget(new QLabel("Averaging (min)") , ir, 4);
1001 ppp2Layout->addWidget(_pppQuickStartLineEdit, ir, 5, Qt::AlignRight);
1002 ppp2Layout->addWidget(new QLabel("Quick-Start (sec) "), ir, 6);
1003 ppp2Layout->addWidget(_pppMaxSolGapLineEdit, ir, 7, Qt::AlignRight);
1004 ppp2Layout->addWidget(new QLabel("Max Sol. Gap (sec)"), ir, 8);
1005 ++ir;
1006 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1007 ppp2Layout->addWidget(_pppAudioResponseLineEdit, ir, 1, Qt::AlignRight);
1008 ppp2Layout->addWidget(new QLabel("Audio response (m)"), ir, 2);
1009 ++ir;
1010 ppp2Layout->addWidget(new QLabel("Sigmas"), ir, 0);
1011 ppp2Layout->addWidget(_pppSigCLineEdit, ir, 1, Qt::AlignRight);
1012 ppp2Layout->addWidget(new QLabel("Code"), ir, 2);
1013 ppp2Layout->addWidget(_pppSigPLineEdit, ir, 3);
1014 ppp2Layout->addWidget(new QLabel("Phase"), ir, 4);
1015 ++ir;
1016 ppp2Layout->addWidget(new QLabel("Sigmas cont'd"), ir, 0);
1017 ppp2Layout->addWidget(_pppSigCrd0, ir, 1, Qt::AlignRight);
1018 ppp2Layout->addWidget(new QLabel("XYZ Init "), ir, 2);
1019 ppp2Layout->addWidget(_pppSigCrdP, ir, 3, Qt::AlignRight);
1020 ppp2Layout->addWidget(new QLabel("XYZ White Noise "), ir, 4);
1021 ppp2Layout->addWidget(_pppSigTrp0, ir, 5, Qt::AlignRight);
1022 ppp2Layout->addWidget(new QLabel("Tropo Init "), ir, 6);
1023 ppp2Layout->addWidget(_pppSigTrpP, ir, 7);
1024 ppp2Layout->addWidget(new QLabel("Tropo White Noise"), ir, 8);
1025 ++ir;
1026 ppp2Layout->addWidget(new QLabel(""), ir, 0);
1027
1028 ppp2group->setLayout(ppp2Layout);
1029
1030 // PPP Client (third panel)
1031 // ------------------------
1032 QVBoxLayout* ppp3Layout = new QVBoxLayout;
1033 ppp3Layout->addWidget(new QLabel("Precise Point Positioning, Panel 3."));
1034 ppp3Layout->addSpacing(ww);
1035
1036 QHBoxLayout* ppp3LayoutHlp1 = new QHBoxLayout;
1037 _pppPlotCoordinates = new QCheckBox();
1038 _pppPlotCoordinates->setCheckState(Qt::CheckState(settings.value("pppPlotCoordinates").toInt()));
1039 ppp3LayoutHlp1->addWidget(new QLabel("PPP Plot"));
1040 ppp3LayoutHlp1->addWidget(_pppPlotCoordinates);
1041 ppp3LayoutHlp1->addStretch();
1042 ppp3Layout->addLayout(ppp3LayoutHlp1);
1043 ppp3Layout->addSpacing(ww);
1044
1045 QHBoxLayout* ppp3LayoutHlp2 = new QHBoxLayout;
1046 _mapWinButton = new QPushButton;
1047 _mapWinButton->setText("Google / Open Street Map");
1048 connect(_mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1049 ppp3LayoutHlp2->addWidget(_mapWinButton);
1050
1051 ppp3LayoutHlp2->addSpacing(5*ww);
1052
1053 _gmRadioButton = new QRadioButton;
1054 _gmRadioButton->setChecked(!settings.value("useOsmMap").toBool());
1055 ppp3LayoutHlp2->addWidget(new QLabel("Google"));
1056 ppp3LayoutHlp2->addWidget(_gmRadioButton);
1057
1058 _osmRadioButton = new QRadioButton;
1059 _osmRadioButton->setChecked(settings.value("useOsmMap").toBool());
1060 ppp3LayoutHlp2->addWidget(new QLabel("OSM"));
1061 ppp3LayoutHlp2->addWidget(_osmRadioButton);
1062
1063 ppp3LayoutHlp2->addSpacing(5*ww);
1064
1065 _mapWinTraceCheckBox = new QCheckBox;
1066 _mapWinTraceCheckBox->setCheckState(Qt::CheckState(settings.value("mapWinTrace").toInt()));
1067 ppp3LayoutHlp2->addWidget(new QLabel("Trace"));
1068 ppp3LayoutHlp2->addWidget(_mapWinTraceCheckBox);
1069
1070 ppp3LayoutHlp2->addSpacing(5*ww);
1071
1072 _mapSpeedSlider = new QSlider;
1073 _mapSpeedSlider->setOrientation(Qt::Horizontal);
1074 _mapSpeedSlider->setRange(1, 10);
1075 int speed = settings.value("mapSpeed").toInt();
1076 if (speed == 0) speed = _mapSpeedSlider->maximum();
1077 _mapSpeedSlider->setSliderPosition(speed);
1078 ppp3LayoutHlp2->addWidget(new QLabel("Speed"));
1079 ppp3LayoutHlp2->addWidget(_mapSpeedSlider);
1080
1081 ppp3LayoutHlp2->addStretch();
1082 ppp3Layout->addLayout(ppp3LayoutHlp2);
1083
1084 ppp3Layout->addStretch();
1085 ppp3group->setLayout(ppp3Layout);
1086
1087 // Reqc Processing
1088 // ---------------
1089 _reqcActionComboBox = new QComboBox();
1090 _reqcActionComboBox->setEditable(false);
1091 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1092 ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1093 if (ik != -1) {
1094 _reqcActionComboBox->setCurrentIndex(ik);
1095 }
1096 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1097 this, SLOT(slotBncTextChanged()));
1098
1099 QGridLayout* reqcLayout = new QGridLayout;
1100 _reqcActionComboBox->setMinimumWidth(15*ww);
1101 _reqcActionComboBox->setMaximumWidth(15*ww);
1102
1103 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1104 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1105 _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
1106 _reqcObsFileChooser->setMinimumWidth(15*ww);
1107 _reqcObsFileChooser->setMaximumWidth(15*ww);
1108
1109 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1110 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1111 _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
1112 _reqcNavFileChooser->setMinimumWidth(15*ww);
1113 _reqcNavFileChooser->setMaximumWidth(15*ww);
1114
1115 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1116 _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to a RINEX observation output file."));
1117 _reqcOutObsLineEdit->setMinimumWidth(15*ww);
1118 _reqcOutObsLineEdit->setMaximumWidth(15*ww);
1119
1120 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1121 _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to a RINEX navigation output file."));
1122 _reqcOutNavLineEdit->setMinimumWidth(15*ww);
1123 _reqcOutNavLineEdit->setMaximumWidth(15*ww);
1124
1125 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1126 _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1127 _reqcOutLogLineEdit->setMinimumWidth(15*ww);
1128 _reqcOutLogLineEdit->setMaximumWidth(15*ww);
1129
1130 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1131 _reqcPlotDirLineEdit->setWhatsThis(tr("Specify the directory name for saving plots."));
1132 _reqcPlotDirLineEdit->setMinimumWidth(15*ww);
1133 _reqcPlotDirLineEdit->setMaximumWidth(15*ww);
1134
1135 _reqcSkyPlotSystems = new QComboBox();
1136 _reqcSkyPlotSystems->setEditable(false);
1137 _reqcSkyPlotSystems->addItems(QString("ALL,GPS,GLONASS,Galileo").split(","));
1138 ik = _reqcSkyPlotSystems->findText(settings.value("reqcSkyPlotSystems").toString());
1139 if (ik != -1) {
1140 _reqcSkyPlotSystems->setCurrentIndex(ik);
1141 }
1142
1143 ir = 0;
1144 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check."),ir, 0, 1, 20);
1145 ++ir;
1146 reqcLayout->addWidget(new QLabel("Action"), ir, 0, Qt::AlignLeft);
1147 reqcLayout->addWidget(_reqcActionComboBox, ir, 1, Qt::AlignLeft);
1148 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1149 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3, Qt::AlignRight);
1150 ++ir;
1151 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0, Qt::AlignLeft);
1152 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1, Qt::AlignRight);
1153 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1154 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3, Qt::AlignRight);
1155 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1156 ++ir;
1157 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0, Qt::AlignLeft);
1158 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1, Qt::AlignRight);
1159 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1160 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3, Qt::AlignRight);
1161 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1162 ++ir;
1163 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1, Qt::AlignRight);
1164 reqcLayout->addWidget(new QLabel("Log"), ir, 2, Qt::AlignLeft);
1165 ++ir;
1166 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0, Qt::AlignLeft);
1167 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1, Qt::AlignRight);
1168 ++ir;
1169 reqcLayout->addWidget(new QLabel("Sky plots for"), ir, 0, Qt::AlignLeft);
1170 reqcLayout->addWidget(_reqcSkyPlotSystems, ir, 1, Qt::AlignRight);
1171 ++ir;
1172 reqcLayout->addWidget(new QLabel(""), ir, 1);
1173 reqcLayout->setRowStretch(ir, 999);
1174
1175 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1176 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1177
1178 reqcgroup->setLayout(reqcLayout);
1179
1180 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1181 this, SLOT(slotReqcEditOption()));
1182
1183 // Combine Corrections
1184 // -------------------
1185 QGridLayout* cmbLayout = new QGridLayout;
1186
1187 populateCmbTable();
1188 cmbLayout->addWidget(_cmbTable, 0, 0, 6, 3);
1189 cmbLayout->addWidget(new QLabel(" "), 0, 5);
1190 cmbLayout->addWidget(new QLabel("Combine Broadcast Correction streams."), 0, 6, 1, 50);
1191 cmbLayout->addWidget(new QLabel(" "), 1, 5);
1192 cmbLayout->addWidget(addCmbRowButton, 1, 6);
1193 cmbLayout->addWidget(delCmbRowButton, 1, 7);
1194 cmbLayout->addWidget(new QLabel(" "), 2, 5);
1195 cmbLayout->addWidget(new QLabel("Method"), 2, 6, Qt::AlignRight);
1196 cmbLayout->addWidget(_cmbMethodComboBox, 2, 7, Qt::AlignRight);
1197 cmbLayout->addWidget(new QLabel(" "), 3, 5);
1198 cmbLayout->addWidget(new QLabel("Maximal Residuum"), 3, 6, Qt::AlignRight);
1199 cmbLayout->addWidget(_cmbMaxresLineEdit, 3, 7, Qt::AlignRight);
1200 cmbLayout->addWidget(new QLabel(" "), 4, 5);
1201 cmbLayout->addWidget(new QLabel("Sampling"), 4, 6, Qt::AlignRight);
1202 cmbLayout->addWidget(_cmbSamplSpinBox, 4, 7, Qt::AlignRight);
1203 cmbLayout->addWidget(new QLabel(" "), 5, 0);
1204
1205 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1206 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1207
1208 cmbgroup->setLayout(cmbLayout);
1209
1210 // Upload Layout (Clocks)
1211 // ----------------------
1212 QGridLayout* uploadHlpLayout = new QGridLayout();
1213
1214 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1215 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1216 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1217
1218 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1219 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1220 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1221 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1222 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1223 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1224 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1225 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1226 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1227 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1228 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1229
1230 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1231 populateUploadTable();
1232
1233 uploadLayout->addWidget(new QLabel("Upload RTCMv3 Broadcast Corrections to caster."));
1234 uploadLayout->addWidget(_uploadTable);
1235 uploadLayout->addLayout(uploadHlpLayout);
1236
1237 uploadgroup->setLayout(uploadLayout);
1238
1239 // Upload Layout (Ephemeris)
1240 // -------------------------
1241 QGridLayout* uploadLayoutEph = new QGridLayout;
1242
1243 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1244 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1245 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1246 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1247
1248 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster."), 0, 0, 1, 50);
1249 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1250 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1251 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1252 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1253 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1254 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1255 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1256 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1257 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1258 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1259 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1260 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1261 uploadLayoutEph->addWidget(new QLabel(" "), 5, 0);
1262 uploadLayoutEph->addWidget(new QLabel(" "), 6, 0);
1263
1264 uploadEphgroup->setLayout(uploadLayoutEph);
1265
1266 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1267 this, SLOT(slotBncTextChanged()));
1268
1269#ifdef RTROVER_INTERFACE
1270 QWidget* rtroverGroup = new QWidget();
1271 _aogroup->addTab(rtroverGroup,tr("RTRover"));
1272 QGridLayout* rtroverLayout = new QGridLayout();
1273
1274 _rtroverModeComboBox = new QComboBox();
1275
1276 _rtroverModeComboBox->setEditable(false);
1277 _rtroverModeComboBox->addItems(QString(",PPP_DF,SPP_DF,PPP_SF,SPP_SF,PPP_AR,RTK,PPP_FTTF").split(","));
1278 ik = _rtroverModeComboBox->findText(settings.value("rtroverMode").toString());
1279 if (ik != -1) {
1280 _rtroverModeComboBox->setCurrentIndex(ik);
1281 }
1282 _rtroverModeComboBox->setMinimumWidth(10*ww);
1283
1284 _rtroverRoverMountLineEdit = new QLineEdit(settings.value("rtroverRoverMount").toString());
1285 _rtroverRoverMountLineEdit->setMaximumWidth(8*ww);
1286 _rtroverCorrMountLineEdit = new QLineEdit(settings.value("rtroverCorrMount").toString());
1287 _rtroverCorrMountLineEdit->setMaximumWidth(8*ww);
1288 _rtroverBaseMountLineEdit = new QLineEdit(settings.value("rtroverBaseMount").toString());
1289 _rtroverBaseMountLineEdit->setMaximumWidth(8*ww);
1290 _rtroverRoverRefCrdXLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdX").toString());
1291 _rtroverRoverRefCrdYLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdY").toString());
1292 _rtroverRoverRefCrdZLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdZ").toString());
1293 _rtroverBaseRefCrdXLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdX").toString());
1294 _rtroverBaseRefCrdYLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdY").toString());
1295 _rtroverBaseCrdZLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdZ").toString());
1296 _rtroverRoverDNLineEdit = new QLineEdit(settings.value("rtroverRoverDN").toString());
1297 _rtroverRoverDNLineEdit->setMaximumWidth(6*ww);
1298 _rtroverRoverDELineEdit = new QLineEdit(settings.value("rtroverRoverDE").toString());
1299 _rtroverRoverDELineEdit->setMaximumWidth(6*ww);
1300 _rtroverRoverDULineEdit = new QLineEdit(settings.value("rtroverRoverDU").toString());
1301 _rtroverRoverDULineEdit->setMaximumWidth(6*ww);
1302 _rtroverBaseDNLineEdit = new QLineEdit(settings.value("rtroverBaseDN").toString());
1303 _rtroverBaseDNLineEdit->setMaximumWidth(6*ww);
1304 _rtroverBaseDELineEdit = new QLineEdit(settings.value("rtroverBaseDE").toString());
1305 _rtroverBaseDELineEdit->setMaximumWidth(6*ww);
1306 _rtroverBaseDULineEdit = new QLineEdit(settings.value("rtroverBaseDU").toString());
1307 _rtroverBaseDULineEdit->setMaximumWidth(6*ww);
1308 _rtroverRoverAntennaLineEdit = new QLineEdit(settings.value("rtroverRoverAntenna").toString());
1309 _rtroverBaseAntennaLineEdit = new QLineEdit(settings.value("rtroverBaseAntenna").toString());
1310 _rtroverAntexFileChooser = new qtFileChooser;
1311 _rtroverAntexFileChooser->setMinimumWidth(12*ww);
1312 _rtroverAntexFileChooser->setFileName(settings.value("rtroverAntex").toString());
1313 _rtroverOutputLineEdit = new QLineEdit(settings.value("rtroverOutput").toString());
1314 _rtroverOutputLineEdit->setMinimumWidth(15*ww);
1315
1316 ir = 0;
1317 rtroverLayout->addWidget(new QLabel("Real-Time Rover"), ir, 0, 1, 2, Qt::AlignLeft);
1318 ++ir;
1319 rtroverLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
1320 rtroverLayout->addWidget(_rtroverModeComboBox, ir, 1, Qt::AlignRight);
1321 rtroverLayout->addWidget(_rtroverRoverMountLineEdit, ir, 3, Qt::AlignRight);
1322 rtroverLayout->addWidget(new QLabel("Rover"), ir, 4, Qt::AlignLeft);
1323 rtroverLayout->addWidget(_rtroverCorrMountLineEdit, ir, 5, Qt::AlignRight);
1324 rtroverLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
1325 rtroverLayout->addWidget(_rtroverBaseMountLineEdit, ir, 7, Qt::AlignRight);
1326 rtroverLayout->addWidget(new QLabel("Base"), ir, 8, Qt::AlignLeft);
1327 ++ir;
1328 rtroverLayout->addWidget(new QLabel("Rover coordinates"), ir, 0, Qt::AlignLeft);
1329 rtroverLayout->addWidget(_rtroverRoverRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1330 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1331 rtroverLayout->addWidget(_rtroverRoverRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1332 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1333 rtroverLayout->addWidget(_rtroverRoverRefCrdZLineEdit, ir, 5, Qt::AlignRight);
1334 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1335 ++ir;
1336 rtroverLayout->addWidget(_rtroverRoverDNLineEdit, ir, 1, Qt::AlignRight);
1337 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1338 rtroverLayout->addWidget(_rtroverRoverDELineEdit, ir, 3, Qt::AlignRight);
1339 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1340 rtroverLayout->addWidget(_rtroverRoverDULineEdit, ir, 5, Qt::AlignRight);
1341 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1342 ++ir;
1343 rtroverLayout->addWidget(new QLabel("Base coordinates"), ir, 0, Qt::AlignLeft);
1344 rtroverLayout->addWidget(_rtroverBaseRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1345 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1346 rtroverLayout->addWidget(_rtroverBaseRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1347 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1348 rtroverLayout->addWidget(_rtroverBaseCrdZLineEdit, ir, 5, Qt::AlignRight);
1349 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1350 ++ir;
1351 rtroverLayout->addWidget(_rtroverBaseDNLineEdit, ir, 1, Qt::AlignRight);
1352 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1353 rtroverLayout->addWidget(_rtroverBaseDELineEdit, ir, 3, Qt::AlignRight);
1354 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1355 rtroverLayout->addWidget(_rtroverBaseDULineEdit, ir, 5, Qt::AlignRight);
1356 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1357 ++ir;
1358 rtroverLayout->addWidget(new QLabel("ANTEX"), ir, 0, Qt::AlignLeft);
1359 rtroverLayout->addWidget(_rtroverAntexFileChooser, ir, 1, Qt::AlignRight);
1360 rtroverLayout->addWidget(new QLabel("file"), ir, 2, Qt::AlignLeft);
1361 rtroverLayout->addWidget(_rtroverBaseAntennaLineEdit, ir, 3, Qt::AlignRight);
1362 rtroverLayout->addWidget(new QLabel("Ant. Rover"), ir, 4, Qt::AlignLeft);
1363 rtroverLayout->addWidget(_rtroverRoverAntennaLineEdit, ir, 5, Qt::AlignRight);
1364 rtroverLayout->addWidget(new QLabel("Ant. Base"), ir, 6, Qt::AlignLeft);
1365 ++ir;
1366 rtroverLayout->addWidget(new QLabel("Output"), ir, 0, Qt::AlignLeft);
1367 rtroverLayout->addWidget(_rtroverOutputLineEdit, ir, 1, Qt::AlignRight);
1368
1369 rtroverGroup->setLayout(rtroverLayout);
1370#endif
1371
1372 // Main Layout
1373 // -----------
1374 QGridLayout* mLayout = new QGridLayout;
1375 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1376 mLayout->addWidget(_aogroup, 0,0);
1377 mLayout->addWidget(_mountPointsTable, 1,0);
1378 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1379 mLayout->addWidget(_loggroup, 2,0);
1380
1381 _canvas->setLayout(mLayout);
1382
1383 // WhatsThis
1384 // ---------
1385 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1386 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1387 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1388 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1389 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1390 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1391 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1392 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1393 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1394 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1395 _corrTimeSpinBox->setWhatsThis(tr("<p>Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full corr epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application.</p><p>Specifying a value of '0' means that BNC immediately outputs all incoming Broadcast Epemeris Corrections and does not drop any of them for latency reasons.</p>"));
1396 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1397 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1398 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1399 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1400 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1401 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1402 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1403 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1404
1405 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1406 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1407 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1408 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1409 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1410 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1411 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1412 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1413 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1414 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1415 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1416 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1417 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster. The default values can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1418 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1419 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1420 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1421 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1422 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1423 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1424 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1425 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p>"));
1426 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1427 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1428 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1429 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1430 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1431 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1432 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA-GGA messages coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' only when handling a VRS stream and your serial connected receiver doesn't generate NMEA-GGA messages.</p>"));
1433 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
1434 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
1435 _pppMountLineEdit->setWhatsThis(tr("<p>Specify an observations stream by its mountpoint from the 'Streams' list compiled below if you want BNC to estimate coordinates for the affected receiver position through a PPP solution. Example: 'FFMJ1'</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris referring to the satellites' Antenna Phase Centers (APC). Stream CLK11 on NTRIP broadcaster products.igs-ip.net is an example.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver in low repetition rate or don't come at all from there.</p>"));
1436 _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'. Corrections must refer to satellite Antenna Phase Centers (APC).</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combine Corrections' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
1437 _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
1438 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check following UNAVCO's famous 'teqc' program.</p>"));
1439 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1440 _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
1441 _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
1442 _pppGLONASSCheckBox->setWhatsThis(tr("<p>By default BNC does not use GLONASS observations in PPP mode.</p><p>Tick 'Use GLONASS' for adding GLONASS observations to GPS and Galileo (optional) in a PPP solution.</p>"));
1443 _pppGalileoCheckBox->setWhatsThis(tr("<p>By default BNC does not use Galileo observations in PPP mode.</p><p>Tick 'Use Galileo' for adding Galileo observations to GPS and GLONASS (optional) in a PPP solution.</p>"));
1444 _pppPlotCoordinates->setWhatsThis(tr("<p>BNC will plot PPP results in the 'PPP Plot' tab as North (red), East (green) and Up (blue) displacements when this option is selected. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes.</p><p>Note that a PPP time series makes only sense for a stationary operated receiver."));
1445 _pppNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where PPP results are saved as NMEA messages.</p>"));
1446 _pppNMEAPortLineEdit->setWhatsThis(tr("<p>Specify an IP port number to output PPP results as NMEA messages through an IP port.</p>"));
1447 _pppSigCLineEdit->setWhatsThis(tr("<p>Enter a sigma for your code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of code observations to a PPP solution based on a combination of code and phase data. 5.0 (default) is likely to be an appropriate choice.</p>"));
1448 _pppQuickStartLineEdit->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solution to a known XYZ coordinate as introduced above and adjust a sigma 'XYZ Ini' according to the coordinate's precision. Fixing the coordinate is done in BNC through setting the 'Sigma XYZ Noise' you define below temporarily to zero.</p><p>This so-called Quick-Start option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the know position throughout the startup period.</p><p>A value of 120 is likely to be an appropriate choice for 'Quick-Start'. Default is an empty option field, meaning that you don't want BNC to operate in Quick-Start mode.</p>"));
1449 _pppMaxSolGapLineEdit->setWhatsThis(tr("<p>Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive solutions exceed this limit, the algorithm returns into Quick-Start mode and fixes the introduced reference coordinate for the specified period. A value of '60' seconds could be an appropriate choice.</p><p>This option makes only sense for a stationary operated receiver where solution convergence can be enforced because a good approximation for the rover position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages.</p>"));
1450 _pppAudioResponseLineEdit->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
1451 _pppSigPLineEdit->setWhatsThis(tr("<p>Enter a sigma for your phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of phase observations to a PPP solutions based on a combination of code and phase data. 0.02 (default) is likely to be an appropriate choice.</p>"));
1452 _pppAverageLineEdit->setWhatsThis(tr("<p>Enter the length of a sliding time window in minutes. BNC will continuously output moving average positions computed from those individual positions obtained most recently throughout this period.</p><p>An empty option field (default) means that you don't want BNC to output moving average positions.</p>"));
1453 _pppSigCrd0->setWhatsThis(tr("<p>Enter a sigma in meters for the initial XYZ coordinate componentes. A value of 100.0 (default) may be an appropriate choice. However, this value may be significantly smaller (i.e. 0.01) when starting for example from a station with known XZY position in Quick-Start mode."));
1454 _pppSigCrdP->setWhatsThis(tr("<p>Enter a sigma in meters for the white noise of estimated XYZ coordinate components. A value of 100.0 (default) may be appropriate considering the potential movement of a rover position.</p>"));
1455 _pppSigTrp0->setWhatsThis(tr("<p>Enter a sigma in meters for the a-priory model based tropospheric delay estimation. A value of 0.1 (default) may be an appropriate choice.</p>"));
1456 _pppSigTrpP->setWhatsThis(tr("<p>Enter a sigma in meters per second to describe the expected variation of the tropospheric effect.</p><p>Supposing 1Hz observation data, a value of 3e-6 (default) would mean that the tropospheric effect may vary for 3600 * 3e-6 = 0.01 meters per hour.</p>"));
1457 _pppRefCrdXLineEdit->setWhatsThis(tr("<p>Enter reference coordinate X of the receiver's position.</p><p>This option only makes sense in static observation conditions.</p>"));
1458 _pppRefCrdYLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Y of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1459 _pppRefCrdZLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Z of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1460 _pppRefdNLineEdit->setWhatsThis(tr("<p>Enter north antenna excentricity.</p>"));
1461 _pppRefdELineEdit->setWhatsThis(tr("<p>Enter east antenna excentricity.</p>"));
1462 _pppRefdULineEdit->setWhatsThis(tr("<p>Enter up antenna excentricity.</p>"));
1463 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1464 _pppSync->setWhatsThis(tr(
1465 "<p> Zero value (or empty field, default) means that BNC processes each epoch of data "
1466 "immediately after its arrival using satellite clock corrections available at "
1467 "that time.</p><p> Non-zero value 'Sync Corr' (i.e. 5) means that the epochs of data "
1468 "are buffered and the processing of each epoch is postponed till the satellite clock "
1469 "corrections not older than 'Sync Corr' seconds are available.<p>"));
1470 _pppAntexFileChooser->setWhatsThis(tr("<p>IGS provides a file containing absolute phase center corrections for GNSS satellite and receiver antennas in ANTEX format. Entering the full path to such an ANTEX file is required for correcting observations for antenna phase center offsets and variations. It allows you to specify the name of your receiver's antenna (as contained in the ANTEX file) to apply such corrections.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets and variations.</p>"));
1471 _pppAntennaLineEdit->setWhatsThis(tr("<p>Specify the receiver's antenna name as defined in your ANTEX file. Observations will be corrected for the antenna phase center's offset which may result in a reduction of a few centimeters at max. Corrections for phase center variations are not yet applied by BNC. The specified name must consist of 20 characters. Add trailing blanks if the antenna name has less then 20 characters.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets.</p>"));
1472 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.<ul><li>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</li><li>Note also that you need to tick 'Use GLONASS' which is part ot the 'PPP (2)' panel in case you want to produce an GPS plus GLONASS combination.</li></ul></p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1473 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1474 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval. Clock and orbit corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1475 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1476 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><ul><li>As an SP3 file contents should be referred to the satellites Center of Mass (CoM) while correctors are referred to the satellites Antenna Phase Center (APC), an offset has to be applied which is available from an IGS ANTEX file. You should therefore specify the 'ANTEX File' path under tab 'PPP (2)' if you want to save the stream contents in SP3 format. If you don't specify an 'ANTEX File' path there, the SP3 file contents will be referred to the satellites APCs.</li></ul></p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1477 _postObsFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Observation file."));
1478 _postNavFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Navigation file."));
1479 _postCorrFileChooser->setWhatsThis(tr("Full path to Broadcast Corrections file as previously saved with BNC in plain ASCII format."));
1480 _postOutLineEdit->setWhatsThis(tr("Full path to file with post processing PPP results. "));
1481 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1482 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1483 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1484 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1485 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1486 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1487 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1488 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1489 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1490
1491 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1492 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1493 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1494 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1495 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1496 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1497
1498 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1499 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1500 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1501
1502 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1503 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1504// Weber
1505
1506 // Enable/Disable all Widgets
1507 // --------------------------
1508 slotBncTextChanged();
1509 enableStartStop();
1510
1511 // Auto start
1512 // ----------
1513 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1514 slotStart();
1515 }
1516}
1517
1518// Destructor
1519////////////////////////////////////////////////////////////////////////////
1520bncWindow::~bncWindow() {
1521 delete _caster;
1522 delete _casterEph;
1523}
1524
1525//
1526////////////////////////////////////////////////////////////////////////////
1527void bncWindow::populateMountPointsTable() {
1528
1529 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1530 _mountPointsTable->removeRow(iRow);
1531 }
1532
1533 bncSettings settings;
1534
1535 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1536 int iRow = 0;
1537 while (it.hasNext()) {
1538 QStringList hlp = it.next().split(" ");
1539 if (hlp.size() < 5) continue;
1540 _mountPointsTable->insertRow(iRow);
1541
1542 QUrl url(hlp[0]);
1543
1544 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1545 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1546 QString nmea(hlp[4]);
1547 if (hlp[5] == "S") {
1548 fullPath = hlp[0].replace(0,2,"");
1549 }
1550 QString ntripVersion = "2";
1551 if (hlp.size() >= 6) {
1552 ntripVersion = (hlp[5]);
1553 }
1554
1555 QTableWidgetItem* it;
1556 it = new QTableWidgetItem(url.userInfo());
1557 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1558 _mountPointsTable->setItem(iRow, 0, it);
1559
1560 it = new QTableWidgetItem(fullPath);
1561 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1562 _mountPointsTable->setItem(iRow, 1, it);
1563
1564 it = new QTableWidgetItem(format);
1565 _mountPointsTable->setItem(iRow, 2, it);
1566
1567 if (nmea == "yes") {
1568 it = new QTableWidgetItem(latitude);
1569 _mountPointsTable->setItem(iRow, 3, it);
1570 it = new QTableWidgetItem(longitude);
1571 _mountPointsTable->setItem(iRow, 4, it);
1572 } else {
1573 it = new QTableWidgetItem(latitude);
1574 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1575 _mountPointsTable->setItem(iRow, 3, it);
1576 it = new QTableWidgetItem(longitude);
1577 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1578 _mountPointsTable->setItem(iRow, 4, it);
1579 }
1580
1581 it = new QTableWidgetItem(nmea);
1582 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1583 _mountPointsTable->setItem(iRow, 5, it);
1584
1585 it = new QTableWidgetItem(ntripVersion);
1586 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1587 _mountPointsTable->setItem(iRow, 6, it);
1588
1589 bncTableItem* bncIt = new bncTableItem();
1590 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1591 _mountPointsTable->setItem(iRow, 7, bncIt);
1592
1593 iRow++;
1594 }
1595
1596 _mountPointsTable->sortItems(1);
1597
1598 enableStartStop();
1599}
1600
1601// Retrieve Table
1602////////////////////////////////////////////////////////////////////////////
1603void bncWindow::slotAddMountPoints() {
1604
1605 bncSettings settings;
1606 QString proxyHost = settings.value("proxyHost").toString();
1607 int proxyPort = settings.value("proxyPort").toInt();
1608 if (proxyHost != _proxyHostLineEdit->text() ||
1609 proxyPort != _proxyPortLineEdit->text().toInt()) {
1610 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1611 "changed. Use the new ones?",
1612 QMessageBox::Yes, QMessageBox::No,
1613 QMessageBox::NoButton);
1614 if (iRet == QMessageBox::Yes) {
1615 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1616 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1617 }
1618 }
1619
1620 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1621 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1622
1623 QMessageBox msgBox;
1624 msgBox.setIcon(QMessageBox::Question);
1625 msgBox.setWindowTitle("Add Stream");
1626 msgBox.setText("Add stream(s) coming from:");
1627
1628 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1629 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1630 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1631 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1632 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1633
1634 msgBox.exec();
1635
1636 if (msgBox.clickedButton() == buttonNtrip) {
1637 bncTableDlg* dlg = new bncTableDlg(this);
1638 dlg->move(this->pos().x()+50, this->pos().y()+50);
1639 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1640 this, SLOT(slotNewMountPoints(QStringList*)));
1641 dlg->exec();
1642 delete dlg;
1643 } else if (msgBox.clickedButton() == buttonIP) {
1644 bncIpPort* ipp = new bncIpPort(this);
1645 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1646 this, SLOT(slotNewMountPoints(QStringList*)));
1647 ipp->exec();
1648 delete ipp;
1649 } else if (msgBox.clickedButton() == buttonUDP) {
1650 bncUdpPort* udp = new bncUdpPort(this);
1651 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1652 this, SLOT(slotNewMountPoints(QStringList*)));
1653 udp->exec();
1654 delete udp;
1655 } else if (msgBox.clickedButton() == buttonSerial) {
1656 bncSerialPort* sep = new bncSerialPort(this);
1657 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1658 this, SLOT(slotNewMountPoints(QStringList*)));
1659 sep->exec();
1660 delete sep;
1661 } else if (msgBox.clickedButton() == buttonCancel) {
1662 // Cancel
1663 }
1664
1665 enableStartStop();
1666}
1667
1668// Delete Selected Mount Points
1669////////////////////////////////////////////////////////////////////////////
1670void bncWindow::slotDeleteMountPoints() {
1671
1672 int nRows = _mountPointsTable->rowCount();
1673 bool flg[nRows];
1674 for (int iRow = 0; iRow < nRows; iRow++) {
1675 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1676 flg[iRow] = true;
1677 }
1678 else {
1679 flg[iRow] = false;
1680 }
1681 }
1682 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1683 if (flg[iRow]) {
1684 _mountPointsTable->removeRow(iRow);
1685 }
1686 }
1687 _actDeleteMountPoints->setEnabled(false);
1688
1689 enableStartStop();
1690}
1691
1692// New Mount Points Selected
1693////////////////////////////////////////////////////////////////////////////
1694void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1695 int iRow = 0;
1696 QListIterator<QString> it(*mountPoints);
1697 while (it.hasNext()) {
1698 QStringList hlp = it.next().split(" ");
1699 QUrl url(hlp[0]);
1700 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1701 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1702 QString nmea(hlp[4]);
1703 if (hlp[5] == "S") {
1704 fullPath = hlp[0].replace(0,2,"");
1705 }
1706 QString ntripVersion = "2";
1707 if (hlp.size() >= 6) {
1708 ntripVersion = (hlp[5]);
1709 }
1710
1711 _mountPointsTable->insertRow(iRow);
1712
1713 QTableWidgetItem* it;
1714 it = new QTableWidgetItem(url.userInfo());
1715 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1716 _mountPointsTable->setItem(iRow, 0, it);
1717
1718 it = new QTableWidgetItem(fullPath);
1719 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1720 _mountPointsTable->setItem(iRow, 1, it);
1721
1722 it = new QTableWidgetItem(format);
1723 _mountPointsTable->setItem(iRow, 2, it);
1724
1725 if (nmea == "yes") {
1726 it = new QTableWidgetItem(latitude);
1727 _mountPointsTable->setItem(iRow, 3, it);
1728 it = new QTableWidgetItem(longitude);
1729 _mountPointsTable->setItem(iRow, 4, it);
1730 } else {
1731 it = new QTableWidgetItem(latitude);
1732 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1733 _mountPointsTable->setItem(iRow, 3, it);
1734 it = new QTableWidgetItem(longitude);
1735 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1736 _mountPointsTable->setItem(iRow, 4, it);
1737 }
1738
1739 it = new QTableWidgetItem(nmea);
1740 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1741 _mountPointsTable->setItem(iRow, 5, it);
1742
1743 it = new QTableWidgetItem(ntripVersion);
1744 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1745 _mountPointsTable->setItem(iRow, 6, it);
1746
1747 bncTableItem* bncIt = new bncTableItem();
1748 _mountPointsTable->setItem(iRow, 7, bncIt);
1749
1750 iRow++;
1751 }
1752 _mountPointsTable->hideColumn(0);
1753 _mountPointsTable->sortItems(1);
1754 delete mountPoints;
1755
1756 enableStartStop();
1757}
1758
1759// Save Options (serialize)
1760////////////////////////////////////////////////////////////////////////////
1761void bncWindow::slotSaveOptions() {
1762 saveOptions();
1763 bncSettings settings;
1764 settings.sync();
1765}
1766
1767// Save Options (memory only)
1768////////////////////////////////////////////////////////////////////////////
1769void bncWindow::saveOptions() {
1770
1771 QStringList mountPoints;
1772 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1773
1774 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1775 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1776 "@" + _mountPointsTable->item(iRow, 1)->text() );
1777
1778 mountPoints.append(url.toString() + " " +
1779 _mountPointsTable->item(iRow, 2)->text()
1780 + " " + _mountPointsTable->item(iRow, 3)->text()
1781 + " " + _mountPointsTable->item(iRow, 4)->text()
1782 + " " + _mountPointsTable->item(iRow, 5)->text()
1783 + " " + _mountPointsTable->item(iRow, 6)->text());
1784 } else {
1785 mountPoints.append(
1786 "//" + _mountPointsTable->item(iRow, 1)->text()
1787 + " " + _mountPointsTable->item(iRow, 2)->text()
1788 + " " + _mountPointsTable->item(iRow, 3)->text()
1789 + " " + _mountPointsTable->item(iRow, 4)->text()
1790 + " " + _mountPointsTable->item(iRow, 5)->text()
1791 + " " + _mountPointsTable->item(iRow, 6)->text());
1792 }
1793 }
1794
1795 QStringList combineStreams;
1796 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1797 QString hlp;
1798 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1799 if (_cmbTable->item(iRow, iCol)) {
1800 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1801 }
1802 }
1803 if (!hlp.isEmpty()) {
1804 combineStreams << hlp;
1805 }
1806 }
1807
1808 QStringList uploadMountpointsOut;
1809 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1810 QString hlp;
1811 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1812 if (_uploadTable->cellWidget(iRow, iCol) &&
1813 (iCol == 3 || iCol == 4 || iCol == 5)) {
1814 if (iCol == 3) {
1815 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1816 hlp += passwd->text() + ",";
1817 }
1818 else if (iCol == 4) {
1819 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1820 hlp += system->currentText() + ",";
1821 }
1822 else if (iCol == 5) {
1823 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1824 QString state; state.setNum(com->checkState());
1825 hlp += state + ",";
1826 }
1827 }
1828 else if (_uploadTable->item(iRow, iCol)) {
1829 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1830 }
1831 }
1832 if (!hlp.isEmpty()) {
1833 uploadMountpointsOut << hlp;
1834 }
1835 }
1836
1837 bncSettings settings;
1838
1839 settings.setValue("startTab", _aogroup->currentIndex());
1840 settings.setValue("statusTab", _loggroup->currentIndex());
1841 settings.setValue("mountPoints", mountPoints);
1842// Network
1843 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1844 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1845 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1846 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1847// General
1848 settings.setValue("logFile", _logFileLineEdit->text());
1849 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1850 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1851 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1852 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1853// RINEX Observations
1854 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1855 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1856 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1857 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1858 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1859 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1860// RINEX Ephemeris
1861 settings.setValue("ephPath", _ephPathLineEdit->text());
1862 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1863 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1864 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1865// Broadcast Corrections
1866 settings.setValue("corrPath", _corrPathLineEdit->text());
1867 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1868 settings.setValue("corrPort", _corrPortLineEdit->text());
1869 settings.setValue("corrTime", _corrTimeSpinBox->value());
1870// Feed Engine
1871 settings.setValue("outPort", _outPortLineEdit->text());
1872 settings.setValue("waitTime", _waitTimeSpinBox->value());
1873 settings.setValue("binSampl", _binSamplSpinBox->value());
1874 settings.setValue("outFile", _outFileLineEdit->text());
1875 settings.setValue("outUPort", _outUPortLineEdit->text());
1876// Serial Output
1877 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1878 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1879 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1880 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1881 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1882 settings.setValue("serialParity", _serialParityComboBox->currentText());
1883 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1884 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1885 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1886 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1887// Outages
1888 settings.setValue("obsRate", _obsRateComboBox->currentText());
1889 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1890 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1891 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1892// Miscellaneous
1893 settings.setValue("miscMount", _miscMountLineEdit->text());
1894 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1895 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1896// PPPP
1897 settings.setValue("pppSPP", _pppSPPComboBox->currentText());
1898 settings.setValue("pppMount", _pppMountLineEdit->text());
1899 settings.setValue("pppCorrMount",_pppCorrMountLineEdit->text());
1900 settings.setValue("pppRefCrdX", _pppRefCrdXLineEdit->text());
1901 settings.setValue("pppRefCrdY", _pppRefCrdYLineEdit->text());
1902 settings.setValue("pppRefCrdZ", _pppRefCrdZLineEdit->text());
1903 settings.setValue("pppRefdN", _pppRefdNLineEdit->text());
1904 settings.setValue("pppRefdE", _pppRefdELineEdit->text());
1905 settings.setValue("pppRefdU", _pppRefdULineEdit->text());
1906 settings.setValue("nmeaFile", _pppNMEALineEdit->text());
1907 settings.setValue("nmeaPort", _pppNMEAPortLineEdit->text());
1908 settings.setValue("pppPlotCoordinates", _pppPlotCoordinates->checkState());
1909 settings.setValue("useOsmMap", _osmRadioButton->isChecked());
1910 settings.setValue("mapWinTrace", _mapWinTraceCheckBox->checkState());
1911 settings.setValue("mapSpeed", _mapSpeedSlider->value());
1912 settings.setValue("postObsFile", _postObsFileChooser->fileName());
1913 settings.setValue("postNavFile", _postNavFileChooser->fileName());
1914 settings.setValue("postCorrFile", _postCorrFileChooser->fileName());
1915 settings.setValue("postOutFile", _postOutLineEdit->text());
1916 settings.setValue("pppAntenna", _pppAntennaLineEdit->text());
1917 settings.setValue("pppAntex", _pppAntexFileChooser->fileName());
1918 settings.setValue("pppUsePhase", _pppUsePhaseCheckBox->checkState());
1919 settings.setValue("pppEstTropo", _pppEstTropoCheckBox->checkState());
1920 settings.setValue("pppGLONASS", _pppGLONASSCheckBox->checkState());
1921 settings.setValue("pppGalileo", _pppGalileoCheckBox->checkState());
1922 settings.setValue("pppSync", _pppSync->text());
1923 settings.setValue("pppAverage", _pppAverageLineEdit->text());
1924 settings.setValue("pppQuickStart", _pppQuickStartLineEdit->text());
1925 settings.setValue("pppMaxSolGap", _pppMaxSolGapLineEdit->text());
1926 settings.setValue("pppAudioResponse", _pppAudioResponseLineEdit->text());
1927 settings.setValue("pppSigmaCode",_pppSigCLineEdit->text());
1928 settings.setValue("pppSigmaPhase",_pppSigPLineEdit->text());
1929 settings.setValue("pppSigCrd0",_pppSigCrd0->text());
1930 settings.setValue("pppSigCrdP",_pppSigCrdP->text());
1931 settings.setValue("pppSigTrp0",_pppSigTrp0->text());
1932 settings.setValue("pppSigTrpP",_pppSigTrpP->text());
1933// Reqc
1934 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1935 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1936 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1937 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1938 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1939 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1940 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1941 settings.setValue("reqcSkyPlotSystems", _reqcSkyPlotSystems->currentText());
1942// Combine Corrections
1943 if (!combineStreams.isEmpty()) {
1944 settings.setValue("combineStreams", combineStreams);
1945 }
1946 else {
1947 settings.setValue("combineStreams", "");
1948 }
1949 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1950 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1951 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1952// Upload Corrections
1953 if (!uploadMountpointsOut.isEmpty()) {
1954 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1955 }
1956 else {
1957 settings.setValue("uploadMountpointsOut", "");
1958 }
1959 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1960 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1961 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1962 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1963// Upload Ephemeris
1964 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1965 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1966 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1967 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1968 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1969
1970#ifdef RTROVER_INTERFACE
1971 settings.setValue("rtroverMode", _rtroverModeComboBox->currentText());
1972 settings.setValue("rtroverRoverMount", _rtroverRoverMountLineEdit->text());
1973 settings.setValue("rtroverCorrMount", _rtroverCorrMountLineEdit->text());
1974 settings.setValue("rtroverBaseMount", _rtroverBaseMountLineEdit->text());
1975 settings.setValue("rtroverRoverRefCrdX", _rtroverRoverRefCrdXLineEdit->text());
1976 settings.setValue("rtroverRoverRefCrdY", _rtroverRoverRefCrdYLineEdit->text());
1977 settings.setValue("rtroverRoverRefCrdZ", _rtroverRoverRefCrdZLineEdit->text());
1978 settings.setValue("rtroverBaseRefCrdX", _rtroverBaseRefCrdXLineEdit->text());
1979 settings.setValue("rtroverBaseRefCrdY", _rtroverBaseRefCrdYLineEdit->text());
1980 settings.setValue("rtroverBaseRefCrdZ", _rtroverBaseCrdZLineEdit->text());
1981 settings.setValue("rtroverRoverDN", _rtroverRoverDNLineEdit->text());
1982 settings.setValue("rtroverRoverDE", _rtroverRoverDELineEdit->text());
1983 settings.setValue("rtroverRoverDU", _rtroverRoverDULineEdit->text());
1984 settings.setValue("rtroverBaseDN", _rtroverBaseDNLineEdit->text());
1985 settings.setValue("rtroverBaseDE", _rtroverBaseDELineEdit->text());
1986 settings.setValue("rtroverBaseDU", _rtroverBaseDULineEdit->text());
1987 settings.setValue("rtroverRoverAntenna", _rtroverRoverAntennaLineEdit->text());
1988 settings.setValue("rtroverBaseAntenna", _rtroverBaseAntennaLineEdit->text());
1989 settings.setValue("rtroverAntex", _rtroverAntexFileChooser->fileName());
1990 settings.setValue("rtroverOutput", _rtroverOutputLineEdit->text());
1991#endif
1992
1993 if (_caster) {
1994 _caster->readMountPoints();
1995 }
1996}
1997
1998// All get slots terminated
1999////////////////////////////////////////////////////////////////////////////
2000void bncWindow::slotGetThreadsFinished() {
2001 BNC_CORE->slotMessage("All Get Threads Terminated", true);
2002 delete _caster; _caster = 0;
2003 delete _casterEph; _casterEph = 0;
2004 _runningRealTime = false;
2005}
2006
2007// Start It!
2008////////////////////////////////////////////////////////////////////////////
2009void bncWindow::slotStart() {
2010 saveOptions();
2011 if ( _pppSPPComboBox->currentText() == "Post-Processing" ) {
2012 startPostProcessingPPP();
2013 }
2014 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2015 startPostProcessingReqc();
2016 }
2017 else {
2018 startRealTime();
2019 }
2020}
2021
2022// Start Real-Time (Retrieve Data etc.)
2023////////////////////////////////////////////////////////////////////////////
2024void bncWindow::startRealTime() {
2025
2026 _runningRealTime = true;
2027
2028 _bncFigurePPP->reset();
2029
2030 _actDeleteMountPoints->setEnabled(false);
2031
2032 enableStartStop();
2033
2034 _caster = new bncCaster(_outFileLineEdit->text(),
2035 _outPortLineEdit->text().toInt());
2036
2037 BNC_CORE->setPort(_outEphPortLineEdit->text().toInt());
2038 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2039 BNC_CORE->initCombination();
2040
2041 connect(_caster, SIGNAL(getThreadsFinished()),
2042 this, SLOT(slotGetThreadsFinished()));
2043
2044 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2045 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2046
2047 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " =========", true);
2048
2049 bncSettings settings;
2050
2051 QDir rnxdir(settings.value("rnxPath").toString());
2052 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2053
2054 QString rnx_file = settings.value("rnxScript").toString();
2055 if ( !rnx_file.isEmpty() ) {
2056 QFile rnxfile(settings.value("rnxScript").toString());
2057 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2058 }
2059
2060 QDir ephdir(settings.value("ephPath").toString());
2061 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2062
2063 QDir corrdir(settings.value("corrPath").toString());
2064 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2065
2066 QString advise_file = settings.value("adviseScript").toString();
2067 if ( !advise_file.isEmpty() ) {
2068 QFile advisefile(settings.value("adviseScript").toString());
2069 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2070 }
2071
2072 QString ant_file = settings.value("pppAntex").toString();
2073 if ( !ant_file.isEmpty() ) {
2074 QFile anxfile(settings.value("pppAntex").toString());
2075 if (!anxfile.exists()) BNC_CORE->slotMessage("Cannot find IGS ANTEX file", true);
2076 }
2077
2078 _caster->readMountPoints();
2079
2080 _casterEph = new bncEphUploadCaster();
2081 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2082 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2083}
2084
2085// Retrieve Data
2086////////////////////////////////////////////////////////////////////////////
2087void bncWindow::slotStop() {
2088 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
2089 QMessageBox::Yes, QMessageBox::No,
2090 QMessageBox::NoButton);
2091 if (iRet == QMessageBox::Yes) {
2092 BNC_CORE->stopCombination();
2093 delete _caster; _caster = 0;
2094 delete _casterEph; _casterEph = 0;
2095 _runningRealTime = false;
2096 enableStartStop();
2097 }
2098}
2099
2100// Close Application gracefully
2101////////////////////////////////////////////////////////////////////////////
2102void bncWindow::closeEvent(QCloseEvent* event) {
2103
2104 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2105 QMessageBox::Yes, QMessageBox::No,
2106 QMessageBox::Cancel);
2107
2108 if (iRet == QMessageBox::Cancel) {
2109 event->ignore();
2110 return;
2111 }
2112 else if (iRet == QMessageBox::Yes) {
2113 slotSaveOptions();
2114 }
2115
2116 QMainWindow::closeEvent(event);
2117}
2118
2119// User changed the selection of mountPoints
2120////////////////////////////////////////////////////////////////////////////
2121void bncWindow::slotSelectionChanged() {
2122 if (_mountPointsTable->selectedItems().isEmpty()) {
2123 _actDeleteMountPoints->setEnabled(false);
2124 }
2125 else {
2126 _actDeleteMountPoints->setEnabled(true);
2127 }
2128}
2129
2130// Display Program Messages
2131////////////////////////////////////////////////////////////////////////////
2132void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2133
2134#ifdef DEBUG_RTCM2_2021
2135 const int maxBufferSize = 1000;
2136#else
2137 const int maxBufferSize = 10000;
2138#endif
2139
2140 if (! showOnScreen ) {
2141 return;
2142 }
2143
2144 QString txt = _log->toPlainText() + "\n" +
2145 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
2146 _log->clear();
2147 _log->append(txt.right(maxBufferSize));
2148}
2149
2150// About Message
2151////////////////////////////////////////////////////////////////////////////
2152void bncWindow::slotAbout() {
2153 new bncAboutDlg(0);
2154}
2155
2156//Flowchart
2157////////////////////////////////////////////////////////////////////////////
2158void bncWindow::slotFlowchart() {
2159 new bncFlowchartDlg(0);
2160}
2161
2162// Help Window
2163////////////////////////////////////////////////////////////////////////////
2164void bncWindow::slotHelp() {
2165 QUrl url;
2166 url.setPath(":bnchelp.html");
2167 new bncHlpDlg(0, url);
2168}
2169
2170// Select Fonts
2171////////////////////////////////////////////////////////////////////////////
2172void bncWindow::slotFontSel() {
2173 bool ok;
2174 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2175 if (ok) {
2176 bncSettings settings;
2177 settings.setValue("font", newFont.toString());
2178 QApplication::setFont(newFont);
2179 int ww = QFontMetrics(newFont).width('w');
2180 setMinimumSize(60*ww, 80*ww);
2181 resize(60*ww, 80*ww);
2182 }
2183}
2184
2185// Whats This Help
2186void bncWindow::slotWhatsThis() {
2187 QWhatsThis::enterWhatsThisMode();
2188}
2189
2190//
2191////////////////////////////////////////////////////////////////////////////
2192void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2193 _threads = threads;
2194
2195 _bncFigure->updateMountPoints();
2196 _bncFigureLate->updateMountPoints();
2197
2198 populateMountPointsTable();
2199 bncSettings settings;
2200 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
2201 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
2202 QListIterator<bncGetThread*> iTh(threads);
2203 while (iTh.hasNext()) {
2204 bncGetThread* thread = iTh.next();
2205 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2206 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2207 "@" + _mountPointsTable->item(iRow, 1)->text() );
2208 if (url == thread->mountPoint() &&
2209 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
2210 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
2211 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
2212 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2213 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2214 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2215 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2216 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2217 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2218 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2219 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2220 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2221 disconnect(thread,
2222 SIGNAL(newPosition(bncTime, double, double, double)),
2223 _bncFigurePPP,
2224 SLOT(slotNewPosition(bncTime, double, double, double)));
2225 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2226 _bncFigurePPP,
2227 SLOT(slotNewPosition(bncTime, double, double, double)));
2228 }
2229#ifdef QT_WEBKIT
2230 if (_mapWin) {
2231 disconnect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2232 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2233 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2234 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2235 }
2236#endif
2237 break;
2238 }
2239 }
2240 }
2241}
2242
2243//
2244////////////////////////////////////////////////////////////////////////////
2245void bncWindow::CreateMenu() {
2246 // Create Menus
2247 // ------------
2248 _menuFile = menuBar()->addMenu(tr("&File"));
2249 _menuFile->addAction(_actFontSel);
2250 _menuFile->addSeparator();
2251 _menuFile->addAction(_actSaveOpt);
2252 _menuFile->addSeparator();
2253 _menuFile->addAction(_actQuit);
2254
2255 _menuHlp = menuBar()->addMenu(tr("&Help"));
2256 _menuHlp->addAction(_actHelp);
2257 _menuHlp->addAction(_actFlowchart);
2258 _menuHlp->addAction(_actAbout);
2259}
2260
2261// Toolbar
2262////////////////////////////////////////////////////////////////////////////
2263void bncWindow::AddToolbar() {
2264 QToolBar* toolBar = new QToolBar;
2265 addToolBar(Qt::BottomToolBarArea, toolBar);
2266 toolBar->setMovable(false);
2267 toolBar->addAction(_actAddMountPoints);
2268 toolBar->addAction(_actDeleteMountPoints);
2269 toolBar->addAction(_actMapMountPoints);
2270 toolBar->addAction(_actStart);
2271 toolBar->addAction(_actStop);
2272 toolBar->addWidget(new QLabel(" "));
2273 toolBar->addAction(_actwhatsthis);
2274}
2275
2276// About
2277////////////////////////////////////////////////////////////////////////////
2278bncAboutDlg::bncAboutDlg(QWidget* parent) :
2279 QDialog(parent) {
2280
2281 QTextBrowser* tb = new QTextBrowser;
2282 QUrl url; url.setPath(":bncabout.html");
2283 tb->setSource(url);
2284 tb->setReadOnly(true);
2285
2286 int ww = QFontMetrics(font()).width('w');
2287 QPushButton* _closeButton = new QPushButton("Close");
2288 _closeButton->setMaximumWidth(10*ww);
2289 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2290
2291 QGridLayout* dlgLayout = new QGridLayout();
2292 QLabel* img = new QLabel();
2293 img->setPixmap(QPixmap(":ntrip-logo.png"));
2294 dlgLayout->addWidget(img, 0,0);
2295 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2296 dlgLayout->addWidget(tb,1,0,1,2);
2297 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2298
2299 setLayout(dlgLayout);
2300 resize(60*ww, 60*ww);
2301 setWindowTitle("About BNC");
2302 show();
2303}
2304
2305//
2306////////////////////////////////////////////////////////////////////////////
2307bncAboutDlg::~bncAboutDlg() {
2308};
2309
2310// Flowchart
2311////////////////////////////////////////////////////////////////////////////
2312bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2313 QDialog(parent) {
2314
2315 int ww = QFontMetrics(font()).width('w');
2316 QPushButton* _closeButton = new QPushButton("Close");
2317 _closeButton->setMaximumWidth(10*ww);
2318 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2319
2320 QGridLayout* dlgLayout = new QGridLayout();
2321 QLabel* img = new QLabel();
2322 img->setPixmap(QPixmap(":bncflowchart.png"));
2323 dlgLayout->addWidget(img, 0,0);
2324 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2325
2326 setLayout(dlgLayout);
2327 setWindowTitle("Flow Chart");
2328 show();
2329}
2330
2331//
2332////////////////////////////////////////////////////////////////////////////
2333bncFlowchartDlg::~bncFlowchartDlg() {
2334};
2335
2336// Enable/Disable Widget (and change its color)
2337////////////////////////////////////////////////////////////////////////////
2338void bncWindow::enableWidget(bool enable, QWidget* widget) {
2339 const static QPalette paletteWhite(QColor(255, 255, 255));
2340 const static QPalette paletteGray(QColor(230, 230, 230));
2341
2342 widget->setEnabled(enable);
2343 if (enable) {
2344 widget->setPalette(paletteWhite);
2345 }
2346 else {
2347 widget->setPalette(paletteGray);
2348 }
2349}
2350
2351// Bnc Text
2352////////////////////////////////////////////////////////////////////////////
2353void bncWindow::slotBncTextChanged(){
2354
2355 bool enable = true;
2356
2357 // Proxy
2358 //------
2359 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2360 enable = !_proxyHostLineEdit->text().isEmpty();
2361 enableWidget(enable, _proxyPortLineEdit);
2362 }
2363
2364 // RINEX Observations
2365 // ------------------
2366 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2367 enable = !_rnxPathLineEdit->text().isEmpty();
2368 enableWidget(enable, _rnxSamplSpinBox);
2369 enableWidget(enable, _rnxSkelLineEdit);
2370 enableWidget(enable, _rnxScrpLineEdit);
2371 enableWidget(enable, _rnxV3CheckBox);
2372 enableWidget(enable, _rnxIntrComboBox);
2373 }
2374
2375 // RINEX Ephemeris
2376 // ---------------
2377 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2378 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2379 enableWidget(enable, _ephIntrComboBox);
2380 enableWidget(enable, _ephV3CheckBox);
2381 }
2382
2383 // Broadcast Corrections
2384 // ---------------------
2385 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2386 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2387 enableWidget(enable, _corrIntrComboBox);
2388 }
2389
2390 // Feed Engine
2391 // -----------
2392 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2393 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2394 enableWidget(enable, _waitTimeSpinBox);
2395 enableWidget(enable, _binSamplSpinBox);
2396 }
2397
2398 // Serial Output
2399 // -------------
2400 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2401 sender() == _serialAutoNMEAComboBox) {
2402 enable = !_serialMountPointLineEdit->text().isEmpty();
2403 enableWidget(enable, _serialPortNameLineEdit);
2404 enableWidget(enable, _serialBaudRateComboBox);
2405 enableWidget(enable, _serialParityComboBox);
2406 enableWidget(enable, _serialDataBitsComboBox);
2407 enableWidget(enable, _serialStopBitsComboBox);
2408 enableWidget(enable, _serialFlowControlComboBox);
2409 enableWidget(enable, _serialAutoNMEAComboBox);
2410
2411 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() != "Auto";
2412 enableWidget(enable2, _serialFileNMEALineEdit);
2413 }
2414
2415 // Outages
2416 // -------
2417 if (sender() == 0 || sender() == _obsRateComboBox) {
2418 enable = !_obsRateComboBox->currentText().isEmpty();
2419 enableWidget(enable, _adviseFailSpinBox);
2420 enableWidget(enable, _adviseRecoSpinBox);
2421 enableWidget(enable, _adviseScriptLineEdit);
2422 }
2423
2424 // Miscellaneous
2425 // -------------
2426 if (sender() == 0 || sender() == _miscMountLineEdit) {
2427 enable = !_miscMountLineEdit->text().isEmpty();
2428 enableWidget(enable, _perfIntrComboBox);
2429 enableWidget(enable, _scanRTCMCheckBox);
2430 }
2431
2432 // Enable/disable Broadcast Ephemerides
2433 // ------------------------------------
2434 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2435 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2436 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2437 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2438 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2439 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2440 _uploadEphPortLineEdit->setEnabled(true);
2441 _uploadEphMountpointLineEdit->setEnabled(true);
2442 _uploadEphPasswordLineEdit->setEnabled(true);
2443 _uploadEphSampleSpinBox->setEnabled(true);
2444 }
2445 else {
2446 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2447 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2448 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2449 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2450 _uploadEphPortLineEdit->setEnabled(false);
2451 _uploadEphMountpointLineEdit->setEnabled(false);
2452 _uploadEphPasswordLineEdit->setEnabled(false);
2453 _uploadEphSampleSpinBox->setEnabled(false);
2454 }
2455 }
2456
2457 // Combine Corrections
2458 // -------------------
2459 if (sender() == 0 || sender() == _cmbTable) {
2460 int iRow = _cmbTable->rowCount();
2461 if (iRow > 0) {
2462 enableWidget(true, _cmbMethodComboBox);
2463 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2464 _cmbMaxresLineEdit->setEnabled(true);
2465 _cmbSamplSpinBox->setEnabled(true);
2466 }
2467 else {
2468 enableWidget(false, _cmbMethodComboBox);
2469 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2470 _cmbMaxresLineEdit->setEnabled(false);
2471 _cmbSamplSpinBox->setEnabled(false);
2472 }
2473 }
2474
2475 // Upload(clk)
2476 // -----------
2477 int iRow = _uploadTable->rowCount();
2478 if (iRow > 0) {
2479 enableWidget(true, _uploadIntrComboBox);
2480 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2481 enableWidget(true, _uploadSamplClkRnxSpinBox);
2482 enableWidget(true, _uploadSamplSp3SpinBox);
2483 }
2484 else {
2485 enableWidget(false, _uploadIntrComboBox);
2486 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2487 enableWidget(false, _uploadSamplClkRnxSpinBox);
2488 enableWidget(false, _uploadSamplSp3SpinBox);
2489 }
2490
2491 // PPP Client
2492 // ----------
2493 if (sender() == 0
2494 || sender() == _pppMountLineEdit
2495 || sender() == _pppCorrMountLineEdit
2496 || sender() == _pppRefCrdXLineEdit
2497 || sender() == _pppRefCrdYLineEdit
2498 || sender() == _pppRefCrdZLineEdit
2499 || sender() == _pppRefdNLineEdit
2500 || sender() == _pppRefdELineEdit
2501 || sender() == _pppRefdULineEdit
2502 || sender() == _pppSync
2503 || sender() == _pppSPPComboBox
2504 || sender() == _pppQuickStartLineEdit
2505 || sender() == _pppEstTropoCheckBox
2506 || sender() == _pppUsePhaseCheckBox
2507 || sender() == _pppAntexFileChooser ) {
2508
2509 enable = !_pppSPPComboBox->currentText().isEmpty();
2510 if (enable) {
2511 enable = (!_pppMountLineEdit->text().isEmpty() && !_pppCorrMountLineEdit->text().isEmpty()) ||
2512 (!_pppMountLineEdit->text().isEmpty() && _pppSPPComboBox->currentText() == "Realtime-SPP") ||
2513 (_pppSPPComboBox->currentText() == "Post-Processing");
2514 }
2515
2516 enableWidget(enable, _pppNMEALineEdit);
2517 enableWidget(enable, _pppNMEAPortLineEdit);
2518 enableWidget(enable, _pppRefCrdXLineEdit);
2519 enableWidget(enable, _pppRefCrdYLineEdit);
2520 enableWidget(enable, _pppRefCrdZLineEdit);
2521 enableWidget(enable, _pppRefdNLineEdit);
2522 enableWidget(enable, _pppRefdELineEdit);
2523 enableWidget(enable, _pppRefdULineEdit);
2524 enableWidget(enable, _pppUsePhaseCheckBox);
2525 enableWidget(enable, _pppPlotCoordinates);
2526 enableWidget(enable, _mapWinButton);
2527 enableWidget(enable, _gmRadioButton);
2528 enableWidget(enable, _osmRadioButton);
2529 enableWidget(enable, _mapWinTraceCheckBox);
2530 enableWidget(enable, _mapSpeedSlider);
2531 enableWidget(enable, _pppEstTropoCheckBox);
2532// enableWidget(enable, _pppGLONASSCheckBox);
2533 enableWidget(enable, _pppGalileoCheckBox);
2534// enableWidget(enable, _pppAntexFileChooser);
2535 enableWidget(enable, _pppSigCLineEdit);
2536 enableWidget(enable, _pppSigCrd0);
2537 enableWidget(enable, _pppSigCrdP);
2538
2539 bool enable2 = enable && !_pppRefCrdXLineEdit->text().isEmpty() &&
2540 !_pppRefCrdYLineEdit->text().isEmpty() &&
2541 !_pppRefCrdZLineEdit->text().isEmpty();
2542
2543 enableWidget(enable2, _pppAverageLineEdit);
2544 enableWidget(enable2, _pppQuickStartLineEdit);
2545
2546 bool enable3 = enable2 && !_pppQuickStartLineEdit->text().isEmpty();
2547 enableWidget(enable3, _pppMaxSolGapLineEdit);
2548 enableWidget(enable3, _pppAudioResponseLineEdit);
2549
2550 bool enable4 = enable && !_pppAntexFileChooser->fileName().isEmpty();
2551 enableWidget(enable4, _pppAntennaLineEdit);
2552
2553 bool enable5 = enable && _pppEstTropoCheckBox->isChecked();
2554 enableWidget(enable5, _pppSigTrp0);
2555 enableWidget(enable5, _pppSigTrpP);
2556
2557 bool enable6 = enable && _pppUsePhaseCheckBox->isChecked();
2558 enableWidget(enable6, _pppSigPLineEdit);
2559
2560 bool enable7 = enable && _pppSPPComboBox->currentText() == "Realtime-PPP";
2561 enableWidget(enable7, _pppSync);
2562
2563 bool enable8 = _pppSPPComboBox->currentText() == "Realtime-PPP";
2564 enableWidget(enable8, _pppCorrMountLineEdit);
2565
2566 bool enable9 = _pppSPPComboBox->currentText() == "Post-Processing";
2567 enableWidget(enable9, _postObsFileChooser);
2568 enableWidget(enable9, _postNavFileChooser);
2569 enableWidget(enable9, _postCorrFileChooser);
2570 enableWidget(enable9, _postOutLineEdit);
2571
2572 bool enable10 = !_pppSPPComboBox->currentText().isEmpty() && !enable9;
2573 enableWidget(enable10, _pppMountLineEdit);
2574 }
2575
2576 if (sender() == 0 || sender() == _reqcActionComboBox) {
2577 enable = !_reqcActionComboBox->currentText().isEmpty();
2578 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2579 enableWidget(enable && enable10, _reqcEditOptionButton);
2580 enableWidget(enable, _reqcObsFileChooser);
2581 enableWidget(enable, _reqcNavFileChooser);
2582 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2583 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2584 enableWidget(enable, _reqcOutLogLineEdit);
2585 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2586 enableWidget(enable && !enable10, _reqcSkyPlotSystems);
2587 }
2588
2589 enableStartStop();
2590}
2591
2592//
2593////////////////////////////////////////////////////////////////////////////
2594void bncWindow::slotAddCmbRow() {
2595 int iRow = _cmbTable->rowCount();
2596 _cmbTable->insertRow(iRow);
2597 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2598 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2599 }
2600}
2601
2602//
2603////////////////////////////////////////////////////////////////////////////
2604void bncWindow::slotDelCmbRow() {
2605 int nRows = _cmbTable->rowCount();
2606 bool flg[nRows];
2607 for (int iRow = 0; iRow < nRows; iRow++) {
2608 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2609 flg[iRow] = true;
2610 }
2611 else {
2612 flg[iRow] = false;
2613 }
2614 }
2615 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2616 if (flg[iRow]) {
2617 _cmbTable->removeRow(iRow);
2618 }
2619 }
2620 nRows = _cmbTable->rowCount();
2621 if (nRows < 1) {
2622 enableWidget(false, _cmbMethodComboBox);
2623 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2624 _cmbMaxresLineEdit->setEnabled(false);
2625 _cmbSamplSpinBox->setEnabled(false);
2626 }
2627}
2628
2629//
2630////////////////////////////////////////////////////////////////////////////
2631void bncWindow::populateCmbTable() {
2632
2633 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2634 _cmbTable->removeRow(iRow);
2635 }
2636
2637 bncSettings settings;
2638
2639 int iRow = -1;
2640 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2641 while (it.hasNext()) {
2642 QStringList hlp = it.next().split(" ");
2643 if (hlp.size() > 2) {
2644 ++iRow;
2645 _cmbTable->insertRow(iRow);
2646 }
2647 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2648 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2649 }
2650 }
2651}
2652
2653//
2654////////////////////////////////////////////////////////////////////////////
2655void bncWindow::slotAddUploadRow() {
2656 int iRow = _uploadTable->rowCount();
2657 _uploadTable->insertRow(iRow);
2658 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2659 if (iCol == 3) {
2660 QLineEdit* passwd = new QLineEdit();
2661 passwd->setFrame(false);
2662 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2663 _uploadTable->setCellWidget(iRow, iCol, passwd);
2664 }
2665 else if (iCol == 4) {
2666 QComboBox* system = new QComboBox();
2667 system->setEditable(false);
2668 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2669 system->setFrame(false);
2670 _uploadTable->setCellWidget(iRow, iCol, system);
2671 }
2672 else if (iCol == 5) {
2673 QCheckBox* com = new QCheckBox();
2674 _uploadTable->setCellWidget(iRow, iCol, com);
2675 }
2676 else if (iCol == 11) {
2677 bncTableItem* bncIt = new bncTableItem();
2678 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2679 _uploadTable->setItem(iRow, iCol, bncIt);
2680 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2681 }
2682 else {
2683 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2684 }
2685 }
2686}
2687
2688//
2689////////////////////////////////////////////////////////////////////////////
2690void bncWindow::slotDelUploadRow() {
2691 BNC_CORE->_uploadTableItems.clear();
2692 int nRows = _uploadTable->rowCount();
2693 bool flg[nRows];
2694 for (int iRow = 0; iRow < nRows; iRow++) {
2695 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2696 flg[iRow] = true;
2697 }
2698 else {
2699 flg[iRow] = false;
2700 }
2701 }
2702 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2703 if (flg[iRow]) {
2704 _uploadTable->removeRow(iRow);
2705 }
2706 }
2707 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2708 BNC_CORE->_uploadTableItems[iRow] =
2709 (bncTableItem*) _uploadTable->item(iRow, 11);
2710 }
2711 nRows = _uploadTable->rowCount();
2712 if (nRows < 1) {
2713 enableWidget(false, _uploadIntrComboBox);
2714 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2715 enableWidget(false, _uploadSamplSp3SpinBox);
2716 enableWidget(false, _uploadSamplClkRnxSpinBox);
2717 }
2718}
2719
2720//
2721////////////////////////////////////////////////////////////////////////////
2722void bncWindow::populateUploadTable() {
2723 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2724 _uploadTable->removeRow(iRow);
2725 }
2726
2727 bncSettings settings;
2728
2729 int iRow = -1;
2730 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2731 while (it.hasNext()) {
2732 QStringList hlp = it.next().split(",");
2733 if (hlp.size() > 6) {
2734 ++iRow;
2735 _uploadTable->insertRow(iRow);
2736 }
2737 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2738 if (iCol == 3) {
2739 QLineEdit* passwd = new QLineEdit();
2740 passwd->setFrame(false);
2741 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2742 passwd->setText(hlp[iCol]);
2743 _uploadTable->setCellWidget(iRow, iCol, passwd);
2744 }
2745 else if (iCol == 4) {
2746 QComboBox* system = new QComboBox();
2747 system->setEditable(false);
2748 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2749 system->setFrame(false);
2750 system->setCurrentIndex(system->findText(hlp[iCol]));
2751 _uploadTable->setCellWidget(iRow, iCol, system);
2752 }
2753 else if (iCol == 5) {
2754 QCheckBox* com = new QCheckBox();
2755 if (hlp[iCol].toInt() == Qt::Checked) {
2756 com->setCheckState(Qt::Checked);
2757 }
2758 _uploadTable->setCellWidget(iRow, iCol, com);
2759 }
2760 else if (iCol == 11) {
2761 bncTableItem* bncIt = new bncTableItem();
2762 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2763 _uploadTable->setItem(iRow, iCol, bncIt);
2764 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2765 }
2766 else {
2767 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2768 }
2769 }
2770 }
2771}
2772
2773//
2774////////////////////////////////////////////////////////////////////////////
2775void bncWindow::slotSetUploadTrafo() {
2776 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2777 dlg->exec();
2778 delete dlg;
2779}
2780
2781// Start Post-Processing PPP
2782////////////////////////////////////////////////////////////////////////////
2783void bncWindow::startPostProcessingPPP() {
2784#ifdef USE_POSTPROCESSING
2785 _runningPostProcessingPPP = true;
2786 _actStart->setText("0 Epochs");
2787 enableStartStop();
2788
2789 _postProcessing = new t_postProcessing(this);
2790 connect(_postProcessing, SIGNAL(finished()), this, SLOT(slotFinishedPostProcessingPPP()));
2791 connect(_postProcessing, SIGNAL(progress(int)), this, SLOT(slotPostProgress(int)));
2792 bncSettings settings;
2793 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2794 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2795 _bncFigurePPP, SLOT(slotNewPosition(bncTime, double, double, double)));
2796 }
2797#ifdef QT_WEBKIT
2798 if (_mapWin) {
2799 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2800 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2801 }
2802#endif
2803
2804 _postProcessing->start();
2805#else
2806 QMessageBox::information(this, "Information",
2807 "Post-Processing Not Permitted");
2808#endif
2809}
2810
2811// Post-Processing PPP Finished
2812////////////////////////////////////////////////////////////////////////////
2813void bncWindow::slotFinishedPostProcessingPPP() {
2814 _runningPostProcessingPPP = false;
2815 _postProcessing = 0;
2816 QMessageBox::information(this, "Information",
2817 "Post-Processing Thread Finished");
2818 _actStart->setText("Start");
2819 enableStartStop();
2820}
2821
2822// Progress Bar Change
2823////////////////////////////////////////////////////////////////////////////
2824void bncWindow::slotPostProgress(int nEpo) {
2825 if (_actStart) {
2826 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2827 }
2828}
2829
2830// Start Post-Processing Reqc
2831////////////////////////////////////////////////////////////////////////////
2832void bncWindow::startPostProcessingReqc() {
2833#ifdef USE_POSTPROCESSING
2834 _runningPostProcessingReqc = true;
2835 enableStartStop();
2836 if (_reqcActionComboBox->currentText() == "Analyze") {
2837 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2838 connect(reqcAnalyze, SIGNAL(finished()),
2839 this, SLOT(slotFinishedPostProcessingReqc()));
2840 reqcAnalyze->start();
2841 }
2842 else {
2843 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2844 connect(reqcEdit, SIGNAL(finished()),
2845 this, SLOT(slotFinishedPostProcessingReqc()));
2846 reqcEdit->start();
2847 }
2848#else
2849 QMessageBox::information(this, "Information",
2850 "Post-Processing Not Permitted");
2851#endif
2852}
2853
2854// Post-Processing Reqc Finished
2855////////////////////////////////////////////////////////////////////////////
2856void bncWindow::slotFinishedPostProcessingReqc() {
2857 _runningPostProcessingReqc = false;
2858 if (_reqcActionComboBox->currentText() != "Analyze") {
2859 QMessageBox::information(this, "Information",
2860 "RINEX Processing Thread Finished");
2861 }
2862 enableStartStop();
2863}
2864
2865// Edit teqc-like editing options
2866////////////////////////////////////////////////////////////////////////////
2867void bncWindow::slotReqcEditOption() {
2868 reqcDlg* dlg = new reqcDlg(this);
2869 dlg->move(this->pos().x()+50, this->pos().y()+50);
2870 dlg->exec();
2871 delete dlg;
2872}
2873
2874// Enable/Disable Start and Stop Buttons
2875////////////////////////////////////////////////////////////////////////////
2876void bncWindow::enableStartStop() {
2877
2878 if ( _pppSPPComboBox && _pppSPPComboBox->currentText() == "Post-Processing" ) {
2879 if (_runningPostProcessingPPP) {
2880 _actStart->setEnabled(false);
2881 }
2882 else {
2883 _actStart->setEnabled(true);
2884 }
2885 _actStop->setEnabled(false);
2886 }
2887 else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
2888 if (_runningPostProcessingReqc) {
2889 _actStart->setEnabled(false);
2890 }
2891 else {
2892 _actStart->setEnabled(true);
2893 }
2894 _actStop->setEnabled(false);
2895 }
2896 else {
2897 if (_runningRealTime) {
2898 _actStart->setEnabled(false);
2899 _actStop->setEnabled(true);
2900 }
2901 else {
2902 _actStop->setEnabled(false);
2903 if (_mountPointsTable->rowCount() == 0) {
2904 _actStart->setEnabled(false);
2905 }
2906 else {
2907 _actStart->setEnabled(true);
2908 }
2909 }
2910 }
2911}
2912
2913// Show Map
2914////////////////////////////////////////////////////////////////////////////
2915void bncWindow::slotMapMountPoints() {
2916 saveOptions();
2917 t_bncMap* bncMap = new t_bncMap(this);
2918 bncMap->setMinimumSize(800, 600);
2919 bncMap->setWindowTitle("Selected Mountpoints");
2920
2921 bncSettings settings;
2922 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2923 while (it.hasNext()) {
2924 QStringList hlp = it.next().split(" ");
2925 if (hlp.size() < 5) continue;
2926 QUrl url(hlp[0]);
2927 double latDeg = hlp[2].toDouble();
2928 double lonDeg = hlp[3].toDouble();
2929 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2930 }
2931
2932 bncMap->show();
2933}
2934
2935// Show Map
2936////////////////////////////////////////////////////////////////////////////
2937void bncWindow::slotMapPPP() {
2938#ifdef QT_WEBKIT
2939 saveOptions();
2940 enableWidget(false, _mapWinButton);
2941 enableWidget(false, _gmRadioButton);
2942 enableWidget(false, _osmRadioButton);
2943 enableWidget(false, _mapWinTraceCheckBox);
2944 enableWidget(false, _mapSpeedSlider);
2945 if (!_mapWin) {
2946 _mapWin = new bncMapWin(this);
2947 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2948 QListIterator<bncGetThread*> it(_threads);
2949 while (it.hasNext()) {
2950 bncGetThread* thread = it.next();
2951 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2952 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2953 }
2954 if (_postProcessing) {
2955 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2956 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2957 }
2958 }
2959 _mapWin->show();
2960#else
2961 QMessageBox::information(this, "Information",
2962 "Qt Library compiled without QtWebKit");
2963#endif
2964}
2965
2966// Show Map
2967////////////////////////////////////////////////////////////////////////////
2968void bncWindow::slotMapPPPClosed() {
2969#ifdef QT_WEBKIT
2970 delete _mapWin;
2971 _mapWin = 0;
2972 slotBncTextChanged();
2973#endif
2974}
Note: See TracBrowser for help on using the repository browser.