source: ntrip/trunk/BNC/src/bncwindow.cpp@ 5219

Last change on this file since 5219 was 5219, checked in by mervart, 11 years ago
File size: 151.6 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#ifdef QT_WEBKIT
67# include "map/bncmapwin.h"
68#endif
69#ifdef USE_POSTPROCESSING
70# include "rinex/bncpostprocess.h"
71# include "rinex/reqcedit.h"
72# include "rinex/reqcanalyze.h"
73#endif
74
75using namespace std;
76
77#ifdef GNSSCENTER_PLUGIN
78Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
79#endif
80
81// Constructor
82////////////////////////////////////////////////////////////////////////////
83bncWindow::bncWindow() {
84
85#ifdef GNSSCENTER_PLUGIN
86 BNC_CORE->setConfFileName("");
87#endif
88
89 _caster = 0;
90 _casterEph = 0;
91
92 _bncFigure = new bncFigure(this);
93 _bncFigureLate = new bncFigureLate(this);
94 _bncFigurePPP = new bncFigurePPP(this);
95 _runningRealTime = false;
96 _runningPostProcessingPPP = false;
97 _runningPostProcessingReqc = false;
98 _postProcessing = 0;
99
100 _pppSPPComboBox = 0; // necessary for enableStartStop()
101 _reqcActionComboBox = 0; // necessary for enableStartStop()
102
103 _mapWin = 0;
104
105 int ww = QFontMetrics(this->font()).width('w');
106
107 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
108
109 setMinimumSize(85*ww, 65*ww);
110
111 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
112
113 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
114 this, SLOT(slotWindowMessage(QByteArray,bool)));
115
116 // Create Actions
117 // --------------
118 _actHelp = new QAction(tr("&Help Contents"),this);
119 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
120
121 _actAbout = new QAction(tr("&About BNC"),this);
122 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
123
124 _actFlowchart = new QAction(tr("&Flow Chart"),this);
125 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
126
127 _actFontSel = new QAction(tr("Select &Font"),this);
128 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
129
130 _actSaveOpt = new QAction(tr("&Save && Reread Configuration"),this);
131 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
132
133 _actQuit = new QAction(tr("&Quit"),this);
134 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
135
136 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
137 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
138
139 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
140 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
141 _actDeleteMountPoints->setEnabled(false);
142
143 _actMapMountPoints = new QAction(tr("Streams &Map"),this);
144 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
145
146 _actStart = new QAction(tr("Sta&rt"),this);
147 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
148
149 _actStop = new QAction(tr("Sto&p"),this);
150 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
151
152 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
153 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
154
155 CreateMenu();
156 AddToolbar();
157
158 bncSettings settings;
159
160 // Network Options
161 // ---------------
162 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
163 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
164
165 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
166 this, SLOT(slotBncTextChanged()));
167
168 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
169 _ignoreSslErrorsCheckBox = new QCheckBox();
170 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
171 settings.value("ignoreSslErrors").toInt()));
172
173 // General Options
174 // ---------------
175 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
176 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
177 _rnxAppendCheckBox = new QCheckBox();
178 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
179 settings.value("rnxAppend").toInt()));
180 _onTheFlyComboBox = new QComboBox();
181 _onTheFlyComboBox->setEditable(false);
182 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
183 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
184 if (ii != -1) {
185 _onTheFlyComboBox->setCurrentIndex(ii);
186 }
187 _autoStartCheckBox = new QCheckBox();
188 _autoStartCheckBox->setCheckState(Qt::CheckState(
189 settings.value("autoStart").toInt()));
190
191 // RINEX Observations Options
192 // --------------------------
193 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
194 _rnxIntrComboBox = new QComboBox();
195 _rnxIntrComboBox->setEditable(false);
196 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
197 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
198 if (ii != -1) {
199 _rnxIntrComboBox->setCurrentIndex(ii);
200 }
201 _rnxSamplSpinBox = new QSpinBox();
202 _rnxSamplSpinBox->setMinimum(0);
203 _rnxSamplSpinBox->setMaximum(60);
204 _rnxSamplSpinBox->setSingleStep(5);
205 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
206 _rnxSamplSpinBox->setSuffix(" sec");
207 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
208 _rnxSkelLineEdit->setMaximumWidth(5*ww);
209 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
210 _rnxV3CheckBox = new QCheckBox();
211 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
212
213 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
214 this, SLOT(slotBncTextChanged()));
215
216 // RINEX Ephemeris Options
217 // -----------------------
218 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
219 _ephIntrComboBox = new QComboBox();
220 _ephIntrComboBox->setEditable(false);
221 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
222 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
223 if (jj != -1) {
224 _ephIntrComboBox->setCurrentIndex(jj);
225 }
226 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
227 _ephV3CheckBox = new QCheckBox();
228 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
229
230 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
231 this, SLOT(slotBncTextChanged()));
232
233 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
234 this, SLOT(slotBncTextChanged()));
235
236 // Broadcast Corrections Options
237 // -----------------------------
238 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
239 _corrIntrComboBox = new QComboBox();
240 _corrIntrComboBox->setEditable(false);
241 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
242 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
243 if (mm != -1) {
244 _corrIntrComboBox->setCurrentIndex(mm);
245 }
246 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
247 _corrTimeSpinBox = new QSpinBox();
248 _corrTimeSpinBox->setMinimum(0);
249 _corrTimeSpinBox->setMaximum(60);
250 _corrTimeSpinBox->setSingleStep(1);
251 _corrTimeSpinBox->setSuffix(" sec");
252 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
253
254 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
255 this, SLOT(slotBncTextChanged()));
256
257 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
258 this, SLOT(slotBncTextChanged()));
259
260 // Feed Engine Options
261 // -------------------
262 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
263 _waitTimeSpinBox = new QSpinBox();
264 _waitTimeSpinBox->setMinimum(1);
265 _waitTimeSpinBox->setMaximum(30);
266 _waitTimeSpinBox->setSingleStep(1);
267 _waitTimeSpinBox->setSuffix(" sec");
268 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
269 _binSamplSpinBox = new QSpinBox();
270 _binSamplSpinBox->setMinimum(0);
271 _binSamplSpinBox->setMaximum(60);
272 _binSamplSpinBox->setSingleStep(5);
273 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
274 _binSamplSpinBox->setSuffix(" sec");
275 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
276 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
277
278 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
279 this, SLOT(slotBncTextChanged()));
280
281 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
282 this, SLOT(slotBncTextChanged()));
283
284 // Serial Output Options
285 // ---------------------
286 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
287 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
288 _serialBaudRateComboBox = new QComboBox();
289 _serialBaudRateComboBox->addItems(QString("110,300,600,"
290 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
291 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
292 if (kk != -1) {
293 _serialBaudRateComboBox->setCurrentIndex(kk);
294 }
295 _serialFlowControlComboBox = new QComboBox();
296 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
297 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
298 if (kk != -1) {
299 _serialFlowControlComboBox->setCurrentIndex(kk);
300 }
301 _serialDataBitsComboBox = new QComboBox();
302 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
303 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
304 if (kk != -1) {
305 _serialDataBitsComboBox->setCurrentIndex(kk);
306 }
307 _serialParityComboBox = new QComboBox();
308 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
309 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
310 if (kk != -1) {
311 _serialParityComboBox->setCurrentIndex(kk);
312 }
313 _serialStopBitsComboBox = new QComboBox();
314 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
315 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
316 if (kk != -1) {
317 _serialStopBitsComboBox->setCurrentIndex(kk);
318 }
319 _serialAutoNMEAComboBox = new QComboBox();
320 _serialAutoNMEAComboBox->addItems(QString("Auto,Manual").split(","));
321 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
322 if (kk != -1) {
323 _serialAutoNMEAComboBox->setCurrentIndex(kk);
324 }
325 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
326 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
327
328 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
329 this, SLOT(slotBncTextChanged()));
330
331 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
332 this, SLOT(slotBncTextChanged()));
333
334 // Outages Options
335 // ---------------
336 _obsRateComboBox = new QComboBox();
337 _obsRateComboBox->setEditable(false);
338 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
339 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
340 if (kk != -1) {
341 _obsRateComboBox->setCurrentIndex(kk);
342 }
343 _adviseFailSpinBox = new QSpinBox();
344 _adviseFailSpinBox->setMinimum(0);
345 _adviseFailSpinBox->setMaximum(60);
346 _adviseFailSpinBox->setSingleStep(1);
347 _adviseFailSpinBox->setSuffix(" min");
348 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
349 _adviseRecoSpinBox = new QSpinBox();
350 _adviseRecoSpinBox->setMinimum(0);
351 _adviseRecoSpinBox->setMaximum(60);
352 _adviseRecoSpinBox->setSingleStep(1);
353 _adviseRecoSpinBox->setSuffix(" min");
354 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
355 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
356
357 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
358 this, SLOT(slotBncTextChanged()));
359
360 // Miscellaneous Options
361 // ---------------------
362 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
363 _perfIntrComboBox = new QComboBox();
364 _perfIntrComboBox->setEditable(false);
365 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
366 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
367 if (ll != -1) {
368 _perfIntrComboBox->setCurrentIndex(ll);
369 }
370 _scanRTCMCheckBox = new QCheckBox();
371 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
372 settings.value("scanRTCM").toInt()));
373
374 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
375 this, SLOT(slotBncTextChanged()));
376
377 // PPP Options
378 // -----------
379 _pppMountLineEdit = new QLineEdit(settings.value("pppMount").toString());
380 _pppMountLineEdit->setMaximumWidth(8*ww);
381 _pppCorrMountLineEdit = new QLineEdit(settings.value("pppCorrMount").toString());
382 _pppMountLineEdit->setMinimumWidth(8*ww);
383 _pppCorrMountLineEdit->setMinimumWidth(8*ww);
384 _pppCorrMountLineEdit->setMaximumWidth(8*ww);
385 _pppNMEALineEdit = new QLineEdit(settings.value("nmeaFile").toString());
386 _pppNMEALineEdit->setMinimumWidth(15*ww);
387 _pppNMEAPortLineEdit = new QLineEdit(settings.value("nmeaPort").toString());
388 _pppNMEAPortLineEdit->setMaximumWidth(8*ww);
389 _pppNMEAPortLineEdit->setMinimumWidth(8*ww);
390 _pppSigCLineEdit = new QLineEdit(settings.value("pppSigmaCode").toString());
391 _pppSigPLineEdit = new QLineEdit(settings.value("pppSigmaPhase").toString());
392 _pppSigCrd0 = new QLineEdit(settings.value("pppSigCrd0").toString());
393 _pppSigCrdP = new QLineEdit(settings.value("pppSigCrdP").toString());
394 _pppSigTrp0 = new QLineEdit(settings.value("pppSigTrp0").toString());
395 _pppSigTrpP = new QLineEdit(settings.value("pppSigTrpP").toString());
396 _pppAverageLineEdit = new QLineEdit(settings.value("pppAverage").toString());
397 _pppQuickStartLineEdit = new QLineEdit(settings.value("pppQuickStart").toString());
398 _pppMaxSolGapLineEdit = new QLineEdit(settings.value("pppMaxSolGap").toString());
399 _pppAudioResponseLineEdit = new QLineEdit(settings.value("pppAudioResponse").toString());
400 _pppRefCrdXLineEdit = new QLineEdit(settings.value("pppRefCrdX").toString());
401 _pppRefCrdYLineEdit = new QLineEdit(settings.value("pppRefCrdY").toString());
402 _pppRefCrdZLineEdit = new QLineEdit(settings.value("pppRefCrdZ").toString());
403 _pppRefdNLineEdit = new QLineEdit(settings.value("pppRefdN").toString());
404 _pppRefdELineEdit = new QLineEdit(settings.value("pppRefdE").toString());
405 _pppRefdULineEdit = new QLineEdit(settings.value("pppRefdU").toString());
406 _pppSync = new QLineEdit(settings.value("pppSync").toString());
407 _pppAntexFileChooser = new qtFileChooser;
408 _pppAntexFileChooser->setMinimumWidth(12*ww);
409 _pppAntennaLineEdit = new QLineEdit(settings.value("pppAntenna").toString());
410 _pppAntexFileChooser->setFileName(settings.value("pppAntex").toString());
411
412 _pppSPPComboBox = new QComboBox();
413 _pppSPPComboBox->setEditable(false);
414 _pppSPPComboBox->addItems(QString(",Realtime-PPP,Realtime-SPP,Post-Processing").split(","));
415 int ik = _pppSPPComboBox->findText(settings.value("pppSPP").toString());
416 if (ik != -1) {
417 _pppSPPComboBox->setCurrentIndex(ik);
418 }
419 _pppUsePhaseCheckBox = new QCheckBox();
420 _pppUsePhaseCheckBox->setCheckState(Qt::CheckState(
421 settings.value("pppUsePhase").toInt()));
422 _pppEstTropoCheckBox = new QCheckBox();
423 _pppEstTropoCheckBox->setCheckState(Qt::CheckState(
424 settings.value("pppEstTropo").toInt()));
425 _pppGLONASSCheckBox = new QCheckBox();
426 _pppGLONASSCheckBox->setCheckState(Qt::CheckState(
427 settings.value("pppGLONASS").toInt()));
428 _pppGalileoCheckBox = new QCheckBox();
429 _pppGalileoCheckBox->setCheckState(Qt::CheckState(
430 settings.value("pppGalileo").toInt()));
431
432 _pppPlotCoordinates = new QCheckBox();
433 _pppPlotCoordinates->setCheckState(Qt::CheckState(
434 settings.value("pppPlotCoordinates").toInt()));
435
436 connect(_pppMountLineEdit, SIGNAL(textChanged(const QString &)),
437 this, SLOT(slotBncTextChanged()));
438
439 connect(_pppCorrMountLineEdit, SIGNAL(textChanged(const QString &)),
440 this, SLOT(slotBncTextChanged()));
441
442 connect(_pppUsePhaseCheckBox, SIGNAL(stateChanged(int)),
443 this, SLOT(slotBncTextChanged()));
444
445 connect(_pppRefCrdXLineEdit, SIGNAL(textChanged(const QString &)),
446 this, SLOT(slotBncTextChanged()));
447 connect(_pppRefCrdYLineEdit, SIGNAL(textChanged(const QString &)),
448 this, SLOT(slotBncTextChanged()));
449 connect(_pppRefCrdZLineEdit, SIGNAL(textChanged(const QString &)),
450 this, SLOT(slotBncTextChanged()));
451 connect(_pppRefdNLineEdit, SIGNAL(textChanged(const QString &)),
452 this, SLOT(slotBncTextChanged()));
453 connect(_pppRefdELineEdit, SIGNAL(textChanged(const QString &)),
454 this, SLOT(slotBncTextChanged()));
455 connect(_pppRefdULineEdit, SIGNAL(textChanged(const QString &)),
456 this, SLOT(slotBncTextChanged()));
457
458 connect(_pppEstTropoCheckBox, SIGNAL(stateChanged(int)),
459 this, SLOT(slotBncTextChanged()));
460
461 connect(_pppSync, SIGNAL(textChanged(const QString &)),
462 this, SLOT(slotBncTextChanged()));
463
464 connect(_pppSPPComboBox, SIGNAL(currentIndexChanged(const QString &)),
465 this, SLOT(slotBncTextChanged()));
466
467 connect(_pppAntexFileChooser, SIGNAL(fileNameChanged(const QString &)),
468 this, SLOT(slotBncTextChanged()));
469
470 connect(_pppQuickStartLineEdit, SIGNAL(textChanged(const QString &)),
471 this, SLOT(slotBncTextChanged()));
472
473 // Streams
474 // -------
475 _mountPointsTable = new QTableWidget(0,8);
476
477 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
478 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
479 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
480 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
481 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
482 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
483 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
484 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
485 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
486_mountPointsTable->setHorizontalHeaderLabels(labels);
487 _mountPointsTable->setGridStyle(Qt::NoPen);
488 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
489 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
490 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
491 _mountPointsTable->hideColumn(0);
492 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
493 SLOT(slotSelectionChanged()));
494 populateMountPointsTable();
495
496 _log = new QTextBrowser();
497 _log->setReadOnly(true);
498
499 // Combine Corrections
500 // -------------------
501 _cmbTable = new QTableWidget(0,3);
502 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
503 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
504 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
505 _cmbTable->setMaximumWidth(30*ww);
506 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
507 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
508 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
509 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
510 _cmbTable->horizontalHeader()->setStretchLastSection(true);
511 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
512
513 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
514
515 _cmbSamplSpinBox = new QSpinBox;
516 _cmbSamplSpinBox->setMinimum(10);
517 _cmbSamplSpinBox->setMaximum(60);
518 _cmbSamplSpinBox->setSingleStep(10);
519 _cmbSamplSpinBox->setMaximumWidth(9*ww);
520 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
521 _cmbSamplSpinBox->setSuffix(" sec");
522
523 QPushButton* addCmbRowButton = new QPushButton("Add Row");
524 QPushButton* delCmbRowButton = new QPushButton("Delete");
525
526 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
527 SLOT(slotBncTextChanged()));
528
529 _cmbMethodComboBox = new QComboBox();
530 _cmbMethodComboBox->setEditable(false);
531 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
532 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
533 if (im != -1) {
534 _cmbMethodComboBox->setCurrentIndex(im);
535 }
536
537 int iRow = _cmbTable->rowCount();
538 if (iRow > 0) {
539 enableWidget(true, _cmbMethodComboBox);
540 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
541 _cmbMaxresLineEdit->setEnabled(true);
542 _cmbSamplSpinBox->setEnabled(true);
543 }
544 else {
545 enableWidget(false, _cmbMethodComboBox);
546 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
547 _cmbMaxresLineEdit->setEnabled(false);
548 _cmbSamplSpinBox->setEnabled(false);
549 }
550
551 // Upload Results
552 // -------------
553 _uploadTable = new QTableWidget(0,12);
554 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
555 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
556 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
557 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
558 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
559 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
560 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
561 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
562 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
563 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
564 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
565 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
566 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
567 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
568 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
569 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
570 _uploadTable->horizontalHeader()->setStretchLastSection(true);
571 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
572
573 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
574 SLOT(slotBncTextChanged()));
575
576 QPushButton* addUploadRowButton = new QPushButton("Add Row");
577 QPushButton* delUploadRowButton = new QPushButton("Del Row");
578 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
579 _uploadIntrComboBox = new QComboBox;
580 _uploadIntrComboBox->setEditable(false);
581 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
582 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
583 if (ii != -1) {
584 _uploadIntrComboBox->setCurrentIndex(ii);
585 }
586
587 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
588 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
589 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
590 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
591 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
592 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
593 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
594
595 _uploadSamplSp3SpinBox = new QSpinBox;
596 _uploadSamplSp3SpinBox->setMinimum(0);
597 _uploadSamplSp3SpinBox->setMaximum(15);
598 _uploadSamplSp3SpinBox->setSingleStep(1);
599 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
600 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
601 _uploadSamplSp3SpinBox->setSuffix(" min");
602
603 _uploadSamplClkRnxSpinBox = new QSpinBox;
604 _uploadSamplClkRnxSpinBox->setMinimum(0);
605 _uploadSamplClkRnxSpinBox->setMaximum(60);
606 _uploadSamplClkRnxSpinBox->setSingleStep(5);
607 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
608 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
609 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
610
611 int iRowT = _uploadTable->rowCount();
612 if (iRowT > 0) {
613 enableWidget(true, _uploadIntrComboBox);
614 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
615 enableWidget(true, _uploadSamplSp3SpinBox);
616 enableWidget(true, _uploadSamplClkRnxSpinBox);
617 }
618 else {
619 enableWidget(false, _uploadIntrComboBox);
620 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
621 enableWidget(false, _uploadSamplSp3SpinBox);
622 enableWidget(false, _uploadSamplClkRnxSpinBox);
623 }
624
625 // Upload RTCM3 Ephemeris
626 // ----------------------
627 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
628 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
629 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
630 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
631 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
632 _uploadEphSampleSpinBox = new QSpinBox;
633 _uploadEphSampleSpinBox->setMinimum(5);
634 _uploadEphSampleSpinBox->setMaximum(60);
635 _uploadEphSampleSpinBox->setSingleStep(5);
636 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
637 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
638 _uploadEphSampleSpinBox->setSuffix(" sec");
639 _uploadEphBytesCounter = new bncBytesCounter;
640
641 // Canvas with Editable Fields
642 // ---------------------------
643 _canvas = new QWidget;
644 setCentralWidget(_canvas);
645
646 _aogroup = new QTabWidget();
647 QWidget* pgroup = new QWidget();
648 QWidget* ggroup = new QWidget();
649 QWidget* sgroup = new QWidget();
650 QWidget* egroup = new QWidget();
651 QWidget* agroup = new QWidget();
652 QWidget* cgroup = new QWidget();
653 QWidget* ogroup = new QWidget();
654 QWidget* rgroup = new QWidget();
655 QWidget* sergroup = new QWidget();
656 QWidget* pppgroup = new QWidget();
657 QWidget* ppp2group = new QWidget();
658 QWidget* ppp3group = new QWidget();
659 QWidget* reqcgroup = new QWidget();
660 QWidget* cmbgroup = new QWidget();
661 QWidget* uploadgroup = new QWidget();
662 QWidget* uploadEphgroup = new QWidget();
663 _aogroup->addTab(pgroup,tr("Network"));
664 _aogroup->addTab(ggroup,tr("General"));
665 _aogroup->addTab(ogroup,tr("RINEX Observations"));
666 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
667 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
668 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
669 _aogroup->addTab(sgroup,tr("Feed Engine"));
670 _aogroup->addTab(sergroup,tr("Serial Output"));
671 _aogroup->addTab(agroup,tr("Outages"));
672 _aogroup->addTab(rgroup,tr("Miscellaneous"));
673 _aogroup->addTab(pppgroup,tr("PPP (1)"));
674 _aogroup->addTab(ppp2group,tr("PPP (2)"));
675 _aogroup->addTab(ppp3group,tr("PPP (3)"));
676#ifdef USE_COMBINATION
677 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
678#endif
679 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
680 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
681
682 // Log Tab
683 // -------
684 _loggroup = new QTabWidget();
685 _loggroup->addTab(_log,tr("Log"));
686 _loggroup->addTab(_bncFigure,tr("Throughput"));
687 _loggroup->addTab(_bncFigureLate,tr("Latency"));
688 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
689
690 // Netowork (Proxy and SSL) Tab
691 // ----------------------------
692 QGridLayout* pLayout = new QGridLayout;
693 pLayout->setColumnMinimumWidth(0,13*ww);
694 _proxyPortLineEdit->setMaximumWidth(9*ww);
695
696 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none."),0, 0, 1, 50);
697 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
698 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
699 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
700 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
701 pLayout->addWidget(new QLabel("Path to SSL Certificates"), 3, 0);
702 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
703 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
704 pLayout->addWidget(new QLabel("Ignore SSL Authorization Errors"), 4, 0);
705 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
706 pLayout->addWidget(new QLabel(" "), 4, 0);
707 pLayout->addWidget(new QLabel(" "), 5, 0);
708 pLayout->addWidget(new QLabel(" "), 6, 0);
709 pgroup->setLayout(pLayout);
710
711 // General Tab
712 // -----------
713 QGridLayout* gLayout = new QGridLayout;
714 gLayout->setColumnMinimumWidth(0,14*ww);
715 _onTheFlyComboBox->setMaximumWidth(9*ww);
716
717 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),0, 0, 1, 50);
718 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
719 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,30);
720 gLayout->addWidget(new QLabel("Append files"), 2, 0);
721 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
722 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
723 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
724 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
725 gLayout->addWidget(_autoStartCheckBox, 4, 1);
726 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
727 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,30);
728 gLayout->addWidget(new QLabel(" "), 6, 0);
729 ggroup->setLayout(gLayout);
730
731 // RINEX Observations
732 // ------------------
733 QGridLayout* oLayout = new QGridLayout;
734 oLayout->setColumnMinimumWidth(0,14*ww);
735 _rnxIntrComboBox->setMaximumWidth(9*ww);
736 _rnxSamplSpinBox->setMaximumWidth(9*ww);
737
738 oLayout->addWidget(new QLabel("Saving RINEX observation files."),0, 0, 1,50);
739 oLayout->addWidget(new QLabel("Directory"), 1, 0);
740 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1,24);
741 oLayout->addWidget(new QLabel("Interval"), 2, 0);
742 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
743 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
744 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
745 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
746 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, 1, 1, Qt::AlignLeft);
747 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
748 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1,24);
749 oLayout->addWidget(new QLabel("Version 3"), 5, 0);
750 oLayout->addWidget(_rnxV3CheckBox, 5, 1);
751 oLayout->addWidget(new QLabel(" "), 6, 0);
752 ogroup->setLayout(oLayout);
753
754 // RINEX Ephemeris
755 // ---------------
756 QGridLayout* eLayout = new QGridLayout;
757 eLayout->setColumnMinimumWidth(0,14*ww);
758 _ephIntrComboBox->setMaximumWidth(9*ww);
759 _outEphPortLineEdit->setMaximumWidth(9*ww);
760
761 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),0,0,1,50);
762 eLayout->addWidget(new QLabel("Directory"), 1, 0);
763 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
764 eLayout->addWidget(new QLabel("Interval"), 2, 0);
765 eLayout->addWidget(_ephIntrComboBox, 2, 1);
766 eLayout->addWidget(new QLabel("Port"), 3, 0);
767 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
768 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
769 eLayout->addWidget(_ephV3CheckBox, 4, 1);
770 eLayout->addWidget(new QLabel(" "), 5, 0);
771 eLayout->addWidget(new QLabel(" "), 6, 0);
772 egroup->setLayout(eLayout);
773
774
775 // Broadcast Corrections
776 // ---------------------
777 QGridLayout* cLayout = new QGridLayout;
778 cLayout->setColumnMinimumWidth(0,14*ww);
779 _corrIntrComboBox->setMaximumWidth(9*ww);
780 _corrPortLineEdit->setMaximumWidth(9*ww);
781 _corrTimeSpinBox->setMaximumWidth(9*ww);
782
783 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),0,0,1,50);
784 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
785 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,20);
786 cLayout->addWidget(new QLabel("Interval"), 2, 0);
787 cLayout->addWidget(_corrIntrComboBox, 2, 1);
788 cLayout->addWidget(new QLabel("Port"), 3, 0);
789 cLayout->addWidget(_corrPortLineEdit, 3, 1);
790 cLayout->addWidget(new QLabel(" Wait for full corr epoch"), 3, 2, Qt::AlignRight);
791 cLayout->addWidget(_corrTimeSpinBox, 3, 3, Qt::AlignLeft);
792 cLayout->addWidget(new QLabel(" "), 4, 0);
793 cLayout->addWidget(new QLabel(" "), 5, 0);
794 cLayout->addWidget(new QLabel(" "), 6, 0);
795 cgroup->setLayout(cLayout);
796
797 // Feed Engine
798 // -----------
799 QGridLayout* sLayout = new QGridLayout;
800 sLayout->setColumnMinimumWidth(0,14*ww);
801 _outPortLineEdit->setMaximumWidth(9*ww);
802 _waitTimeSpinBox->setMaximumWidth(9*ww);
803 _binSamplSpinBox->setMaximumWidth(9*ww);
804 _outUPortLineEdit->setMaximumWidth(9*ww);
805
806 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine."),0,0,1,50);
807 sLayout->addWidget(new QLabel("Port"), 1, 0);
808 sLayout->addWidget(_outPortLineEdit, 1, 1);
809 sLayout->addWidget(new QLabel("Wait for full obs epoch"), 1, 2, Qt::AlignRight);
810 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
811 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
812 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
813 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
814 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 20);
815 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
816 sLayout->addWidget(_outUPortLineEdit, 4, 1);
817 sLayout->addWidget(new QLabel(" "), 5, 0);
818 sLayout->addWidget(new QLabel(" "), 6, 0);
819 sgroup->setLayout(sLayout);
820
821 // Serial Output
822 // -------------
823 QGridLayout* serLayout = new QGridLayout;
824 serLayout->setColumnMinimumWidth(0,14*ww);
825 _serialBaudRateComboBox->setMaximumWidth(9*ww);
826 _serialFlowControlComboBox->setMaximumWidth(11*ww);
827 _serialDataBitsComboBox->setMaximumWidth(5*ww);
828 _serialParityComboBox->setMaximumWidth(9*ww);
829 _serialStopBitsComboBox->setMaximumWidth(5*ww);
830 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
831 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
832
833 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver."),0,0,1,30);
834 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
835 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
836 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
837 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
838 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
839 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
840 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
841 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
842 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
843 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
844 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
845 serLayout->addWidget(_serialParityComboBox, 4, 3);
846 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
847 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
848 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
849 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
850 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
851 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,15);
852 serLayout->addWidget(new QLabel("Height"), 5,20, Qt::AlignRight);
853 serLayout->addWidget(_serialHeightNMEALineEdit, 5,21, 1,11);
854 serLayout->addWidget(new QLabel(" "), 6, 0);
855
856 sergroup->setLayout(serLayout);
857
858 // Outages
859 // -------
860 QGridLayout* aLayout = new QGridLayout;
861 aLayout->setColumnMinimumWidth(0,14*ww);
862 _obsRateComboBox->setMaximumWidth(9*ww);
863 _adviseFailSpinBox->setMaximumWidth(9*ww);
864 _adviseRecoSpinBox->setMaximumWidth(9*ww);
865
866 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes."),0,0,1,50,Qt::AlignLeft);
867 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
868 aLayout->addWidget(_obsRateComboBox, 1, 1);
869 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
870 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
871 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
872 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
873 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
874 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,30);
875 aLayout->addWidget(new QLabel(" "), 5, 0);
876 aLayout->addWidget(new QLabel(" "), 6, 0);
877 agroup->setLayout(aLayout);
878
879 // Miscellaneous
880 // -------------
881 QGridLayout* rLayout = new QGridLayout;
882 rLayout->setColumnMinimumWidth(0,14*ww);
883 _perfIntrComboBox->setMaximumWidth(9*ww);
884
885 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for numbers of message types and antenna information."),0, 0,1,30);
886 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
887 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1,7);
888 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
889 rLayout->addWidget(_perfIntrComboBox, 2, 1);
890 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
891 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
892 rLayout->addWidget(new QLabel(" "), 4, 0);
893 rLayout->addWidget(new QLabel(" "), 5, 0);
894 rLayout->addWidget(new QLabel(" "), 6, 0);
895 rgroup->setLayout(rLayout);
896
897 // PPP Client
898 // ----------
899 QGridLayout* pppLayout = new QGridLayout;
900 pppLayout->setColumnMinimumWidth(0,14*ww);
901 _pppSigCLineEdit->setMaximumWidth(6*ww);
902 _pppSigPLineEdit->setMaximumWidth(6*ww);
903 _pppSigCrd0->setMaximumWidth(6*ww);
904 _pppSigCrdP->setMaximumWidth(6*ww);
905 _pppSigTrp0->setMaximumWidth(6*ww);
906 _pppSigTrpP->setMaximumWidth(6*ww);
907 _pppAverageLineEdit->setMaximumWidth(6*ww);
908 _pppQuickStartLineEdit->setMaximumWidth(6*ww);
909 _pppMaxSolGapLineEdit->setMaximumWidth(6*ww);
910 _pppAudioResponseLineEdit->setMaximumWidth(6*ww);
911 _pppRefCrdXLineEdit->setMaximumWidth(10*ww);
912 _pppRefCrdYLineEdit->setMaximumWidth(10*ww);
913 _pppRefCrdZLineEdit->setMaximumWidth(10*ww);
914 _pppRefdNLineEdit->setMaximumWidth(6*ww);
915 _pppRefdELineEdit->setMaximumWidth(6*ww);
916 _pppRefdULineEdit->setMaximumWidth(6*ww);
917 _pppSync->setMaximumWidth(6*ww);
918 _pppSPPComboBox->setMinimumWidth(15*ww);
919
920 _postObsFileChooser = new qtFileChooser;
921 _postObsFileChooser->setFileName(settings.value("postObsFile").toString());
922 _postObsFileChooser->setMinimumWidth(15*ww);
923 _postNavFileChooser = new qtFileChooser;
924 _postNavFileChooser->setFileName(settings.value("postNavFile").toString());
925 _postNavFileChooser->setMinimumWidth(15*ww);
926 _postCorrFileChooser = new qtFileChooser;
927 _postCorrFileChooser->setFileName(settings.value("postCorrFile").toString());
928 _postCorrFileChooser->setMinimumWidth(15*ww);
929 _postOutLineEdit = new QLineEdit(settings.value("postOutFile").toString());
930 _postOutLineEdit->setMinimumWidth(15*ww);
931
932 int ir = 0;
933 pppLayout->addWidget(new QLabel("Precise Point Positioning, Panel 1."), ir, 0, 1, 2, Qt::AlignLeft);
934 ++ir;
935 pppLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
936 pppLayout->addWidget(_pppSPPComboBox, ir, 1, Qt::AlignRight);
937 pppLayout->addWidget(_pppMountLineEdit, ir, 3, Qt::AlignRight);
938 pppLayout->addWidget(new QLabel("Obs."), ir, 4, Qt::AlignLeft);
939 pppLayout->addWidget(_pppCorrMountLineEdit, ir, 5, Qt::AlignRight);
940 pppLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
941 ++ir;
942 pppLayout->addWidget(new QLabel("Marker coordinates"), ir, 0, Qt::AlignLeft);
943 pppLayout->addWidget(_pppRefCrdXLineEdit, ir, 1, Qt::AlignRight);
944 pppLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
945 pppLayout->addWidget(_pppRefCrdYLineEdit, ir, 3, Qt::AlignRight);
946 pppLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
947 pppLayout->addWidget(_pppRefCrdZLineEdit, ir, 5, Qt::AlignRight);
948 pppLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
949 ++ir;
950 pppLayout->addWidget(new QLabel("Antenna excentricity"), ir, 0, Qt::AlignLeft);
951 pppLayout->addWidget(_pppRefdNLineEdit, ir, 1, Qt::AlignRight);
952 pppLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
953 pppLayout->addWidget(_pppRefdELineEdit, ir, 3, Qt::AlignRight);
954 pppLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
955 pppLayout->addWidget(_pppRefdULineEdit, ir, 5, Qt::AlignRight);
956 pppLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
957 ++ir;
958 pppLayout->addWidget(new QLabel("NMEA & plot output"),ir, 0, Qt::AlignLeft);
959 pppLayout->addWidget(_pppNMEALineEdit, ir, 1, Qt::AlignRight);
960 pppLayout->addWidget(new QLabel("NMEA File"), ir, 2, Qt::AlignLeft);
961 pppLayout->addWidget(_pppNMEAPortLineEdit, ir, 3, Qt::AlignRight);
962 pppLayout->addWidget(new QLabel("NMEA Port"), ir, 4, Qt::AlignLeft);
963 ++ir;
964 pppLayout->addWidget(new QLabel("Post-processing"), ir, 0, Qt::AlignLeft);
965 pppLayout->addWidget(_postObsFileChooser, ir, 1, Qt::AlignRight);
966 pppLayout->addWidget(new QLabel("Obs "), ir, 2, Qt::AlignLeft);
967 pppLayout->addWidget(_postNavFileChooser, ir, 3, Qt::AlignRight);
968 pppLayout->addWidget(new QLabel("Nav "), ir, 4, Qt::AlignLeft);
969 ++ir;
970 pppLayout->addWidget(_postCorrFileChooser, ir, 1, Qt::AlignRight);
971 pppLayout->addWidget(new QLabel("Corr"), ir, 2, Qt::AlignLeft);
972 pppLayout->addWidget(_postOutLineEdit, ir, 3, Qt::AlignRight);
973 pppLayout->addWidget(new QLabel("Log (full path)"), ir, 4, Qt::AlignLeft);
974
975 pppgroup->setLayout(pppLayout);
976
977 // PPP Client (second panel)
978 // -------------------------
979 QGridLayout* ppp2Layout = new QGridLayout;
980 ppp2Layout->setColumnMinimumWidth(0,14*ww);
981 ir = 0;
982 ppp2Layout->addWidget(new QLabel("Precise Point Positioning, Panel 2."), ir, 0, 1, 10);
983 ++ir;
984 ppp2Layout->addWidget(new QLabel("Antennas"), ir, 0);
985 ppp2Layout->addWidget(_pppAntexFileChooser, ir, 1,1,3);
986 ppp2Layout->addWidget(new QLabel("ANTEX File"), ir, 4);
987 ppp2Layout->addWidget(_pppAntennaLineEdit, ir, 5,1,3);
988 ppp2Layout->addWidget(new QLabel("Antenna Name"), ir, 8);
989 ++ir;
990 ppp2Layout->addWidget(new QLabel("Basics"), ir, 0, 1, 5);
991 ppp2Layout->addWidget(_pppUsePhaseCheckBox, ir, 1, Qt::AlignRight);
992 ppp2Layout->addWidget(new QLabel("Use phase obs"), ir, 2);
993 ppp2Layout->addWidget(_pppEstTropoCheckBox, ir, 3, Qt::AlignRight);
994 ppp2Layout->addWidget(new QLabel("Estimate tropo"), ir, 4);
995 ppp2Layout->addWidget(_pppGLONASSCheckBox, ir, 5, Qt::AlignRight);
996 ppp2Layout->addWidget(new QLabel("Use GLONASS"), ir, 6);
997 ppp2Layout->addWidget(_pppGalileoCheckBox, ir, 7, Qt::AlignRight);
998 ppp2Layout->addWidget(new QLabel("Use Galileo "), ir, 8);
999 ++ir;
1000 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1001 ppp2Layout->addWidget(_pppSync, ir, 1);
1002 ppp2Layout->addWidget(new QLabel("Sync Corr (sec) "), ir, 2);
1003 ppp2Layout->addWidget(_pppAverageLineEdit, ir, 3, Qt::AlignRight);
1004 ppp2Layout->addWidget(new QLabel("Averaging (min)") , ir, 4);
1005 ppp2Layout->addWidget(_pppQuickStartLineEdit, ir, 5, Qt::AlignRight);
1006 ppp2Layout->addWidget(new QLabel("Quick-Start (sec) "), ir, 6);
1007 ppp2Layout->addWidget(_pppMaxSolGapLineEdit, ir, 7, Qt::AlignRight);
1008 ppp2Layout->addWidget(new QLabel("Max Sol. Gap (sec)"), ir, 8);
1009 ++ir;
1010 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1011 ppp2Layout->addWidget(_pppAudioResponseLineEdit, ir, 1, Qt::AlignRight);
1012 ppp2Layout->addWidget(new QLabel("Audio response (m)"), ir, 2);
1013 ++ir;
1014 ppp2Layout->addWidget(new QLabel("Sigmas"), ir, 0);
1015 ppp2Layout->addWidget(_pppSigCLineEdit, ir, 1, Qt::AlignRight);
1016 ppp2Layout->addWidget(new QLabel("Code"), ir, 2);
1017 ppp2Layout->addWidget(_pppSigPLineEdit, ir, 3);
1018 ppp2Layout->addWidget(new QLabel("Phase"), ir, 4);
1019 ++ir;
1020 ppp2Layout->addWidget(new QLabel("Sigmas cont'd"), ir, 0);
1021 ppp2Layout->addWidget(_pppSigCrd0, ir, 1, Qt::AlignRight);
1022 ppp2Layout->addWidget(new QLabel("XYZ Init "), ir, 2);
1023 ppp2Layout->addWidget(_pppSigCrdP, ir, 3, Qt::AlignRight);
1024 ppp2Layout->addWidget(new QLabel("XYZ White Noise "), ir, 4);
1025 ppp2Layout->addWidget(_pppSigTrp0, ir, 5, Qt::AlignRight);
1026 ppp2Layout->addWidget(new QLabel("Tropo Init "), ir, 6);
1027 ppp2Layout->addWidget(_pppSigTrpP, ir, 7);
1028 ppp2Layout->addWidget(new QLabel("Tropo White Noise"), ir, 8);
1029 ++ir;
1030 ppp2Layout->addWidget(new QLabel(""), ir, 0);
1031
1032 ppp2group->setLayout(ppp2Layout);
1033
1034 // PPP Client (third panel)
1035 // ------------------------
1036 QVBoxLayout* ppp3Layout = new QVBoxLayout;
1037 ppp3Layout->addWidget(new QLabel("Precise Point Positioning, Panel 3."));
1038
1039 QHBoxLayout* ppp3LayoutHlp1 = new QHBoxLayout;
1040 ppp3LayoutHlp1->addWidget(new QLabel("PPP Plot"));
1041 ppp3LayoutHlp1->addWidget(_pppPlotCoordinates);
1042 ppp3LayoutHlp1->addStretch();
1043 ppp3Layout->addLayout(ppp3LayoutHlp1);
1044
1045 QHBoxLayout* ppp3LayoutHlp2 = new QHBoxLayout;
1046 _mapWinButton = new QPushButton;
1047 _mapWinButton->setText("Google / Open Street Map");
1048 QRadioButton* _gmRadioButton = new QRadioButton;
1049 QRadioButton* _osmRadioButton = new QRadioButton;
1050 connect(_mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1051 ppp3LayoutHlp2->addWidget(_mapWinButton);
1052 ppp3LayoutHlp2->addWidget(_gmRadioButton);
1053 ppp3LayoutHlp2->addWidget(new QLabel("Google"));
1054 ppp3LayoutHlp2->addWidget(_osmRadioButton);
1055 ppp3LayoutHlp2->addWidget(new QLabel("OSM"));
1056 ppp3LayoutHlp2->addStretch();
1057 ppp3Layout->addLayout(ppp3LayoutHlp2);
1058
1059 ppp3Layout->addStretch();
1060 ppp3group->setLayout(ppp3Layout);
1061
1062 // Reqc Processing
1063 // ---------------
1064 _reqcActionComboBox = new QComboBox();
1065 _reqcActionComboBox->setEditable(false);
1066 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1067 ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1068 if (ik != -1) {
1069 _reqcActionComboBox->setCurrentIndex(ik);
1070 }
1071 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1072 this, SLOT(slotBncTextChanged()));
1073
1074 QGridLayout* reqcLayout = new QGridLayout;
1075 _reqcActionComboBox->setMinimumWidth(15*ww);
1076 _reqcActionComboBox->setMaximumWidth(15*ww);
1077
1078 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1079 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1080 _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
1081 _reqcObsFileChooser->setMinimumWidth(15*ww);
1082 _reqcObsFileChooser->setMaximumWidth(15*ww);
1083
1084 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1085 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1086 _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
1087 _reqcNavFileChooser->setMinimumWidth(15*ww);
1088 _reqcNavFileChooser->setMaximumWidth(15*ww);
1089
1090 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1091 _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to a RINEX observation output file."));
1092 _reqcOutObsLineEdit->setMinimumWidth(15*ww);
1093 _reqcOutObsLineEdit->setMaximumWidth(15*ww);
1094
1095 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1096 _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to a RINEX navigation output file."));
1097 _reqcOutNavLineEdit->setMinimumWidth(15*ww);
1098 _reqcOutNavLineEdit->setMaximumWidth(15*ww);
1099
1100 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1101 _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1102 _reqcOutLogLineEdit->setMinimumWidth(15*ww);
1103 _reqcOutLogLineEdit->setMaximumWidth(15*ww);
1104
1105 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1106 _reqcPlotDirLineEdit->setWhatsThis(tr("Specify the directory name for saving plots."));
1107 _reqcPlotDirLineEdit->setMinimumWidth(15*ww);
1108 _reqcPlotDirLineEdit->setMaximumWidth(15*ww);
1109
1110 _reqcSkyPlotSystems = new QComboBox();
1111 _reqcSkyPlotSystems->setEditable(false);
1112 _reqcSkyPlotSystems->addItems(QString("ALL,GPS,GLONASS,Galileo").split(","));
1113 ik = _reqcSkyPlotSystems->findText(settings.value("reqcSkyPlotSystems").toString());
1114 if (ik != -1) {
1115 _reqcSkyPlotSystems->setCurrentIndex(ik);
1116 }
1117
1118 ir = 0;
1119 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check."),ir, 0, 1, 20);
1120 ++ir;
1121 reqcLayout->addWidget(new QLabel("Action"), ir, 0, Qt::AlignLeft);
1122 reqcLayout->addWidget(_reqcActionComboBox, ir, 1, Qt::AlignLeft);
1123 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1124 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3, Qt::AlignRight);
1125 ++ir;
1126 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0, Qt::AlignLeft);
1127 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1, Qt::AlignRight);
1128 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1129 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3, Qt::AlignRight);
1130 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1131 ++ir;
1132 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0, Qt::AlignLeft);
1133 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1, Qt::AlignRight);
1134 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1135 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3, Qt::AlignRight);
1136 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1137 ++ir;
1138 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1, Qt::AlignRight);
1139 reqcLayout->addWidget(new QLabel("Log"), ir, 2, Qt::AlignLeft);
1140 ++ir;
1141 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0, Qt::AlignLeft);
1142 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1, Qt::AlignRight);
1143 ++ir;
1144 reqcLayout->addWidget(new QLabel("Sky plots for"), ir, 0, Qt::AlignLeft);
1145 reqcLayout->addWidget(_reqcSkyPlotSystems, ir, 1, Qt::AlignRight);
1146 ++ir;
1147 reqcLayout->addWidget(new QLabel(""), ir, 1);
1148 reqcLayout->setRowStretch(ir, 999);
1149
1150 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1151 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1152
1153 reqcgroup->setLayout(reqcLayout);
1154
1155 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1156 this, SLOT(slotReqcEditOption()));
1157
1158 // Combine Corrections
1159 // -------------------
1160 QGridLayout* cmbLayout = new QGridLayout;
1161
1162 populateCmbTable();
1163 cmbLayout->addWidget(_cmbTable, 0, 0, 6, 3);
1164 cmbLayout->addWidget(new QLabel(" "), 0, 5);
1165 cmbLayout->addWidget(new QLabel("Combine Broadcast Correction streams."), 0, 6, 1, 50);
1166 cmbLayout->addWidget(new QLabel(" "), 1, 5);
1167 cmbLayout->addWidget(addCmbRowButton, 1, 6);
1168 cmbLayout->addWidget(delCmbRowButton, 1, 7);
1169 cmbLayout->addWidget(new QLabel(" "), 2, 5);
1170 cmbLayout->addWidget(new QLabel("Method"), 2, 6, Qt::AlignRight);
1171 cmbLayout->addWidget(_cmbMethodComboBox, 2, 7, Qt::AlignRight);
1172 cmbLayout->addWidget(new QLabel(" "), 3, 5);
1173 cmbLayout->addWidget(new QLabel("Maximal Residuum"), 3, 6, Qt::AlignRight);
1174 cmbLayout->addWidget(_cmbMaxresLineEdit, 3, 7, Qt::AlignRight);
1175 cmbLayout->addWidget(new QLabel(" "), 4, 5);
1176 cmbLayout->addWidget(new QLabel("Sampling"), 4, 6, Qt::AlignRight);
1177 cmbLayout->addWidget(_cmbSamplSpinBox, 4, 7, Qt::AlignRight);
1178 cmbLayout->addWidget(new QLabel(" "), 5, 0);
1179
1180 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1181 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1182
1183 cmbgroup->setLayout(cmbLayout);
1184
1185 // Upload Layout (Clocks)
1186 // ----------------------
1187 QGridLayout* uploadHlpLayout = new QGridLayout();
1188
1189 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1190 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1191 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1192
1193 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1194 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1195 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1196 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1197 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1198 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1199 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1200 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1201 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1202 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1203 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1204
1205 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1206 populateUploadTable();
1207
1208 uploadLayout->addWidget(new QLabel("Upload RTCMv3 Broadcast Corrections to caster."));
1209 uploadLayout->addWidget(_uploadTable);
1210 uploadLayout->addLayout(uploadHlpLayout);
1211
1212 uploadgroup->setLayout(uploadLayout);
1213
1214 // Upload Layout (Ephemeris)
1215 // -------------------------
1216 QGridLayout* uploadLayoutEph = new QGridLayout;
1217
1218 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1219 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1220 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1221 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1222
1223 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster."), 0, 0, 1, 50);
1224 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1225 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1226 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1227 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1228 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1229 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1230 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1231 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1232 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1233 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1234 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1235 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1236 uploadLayoutEph->addWidget(new QLabel(" "), 5, 0);
1237 uploadLayoutEph->addWidget(new QLabel(" "), 6, 0);
1238
1239 uploadEphgroup->setLayout(uploadLayoutEph);
1240
1241 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1242 this, SLOT(slotBncTextChanged()));
1243
1244#ifdef RTROVER_INTERFACE
1245 QWidget* rtroverGroup = new QWidget();
1246 _aogroup->addTab(rtroverGroup,tr("RTRover"));
1247 QGridLayout* rtroverLayout = new QGridLayout();
1248
1249 _rtroverModeComboBox = new QComboBox();
1250
1251 _rtroverModeComboBox->setEditable(false);
1252 _rtroverModeComboBox->addItems(QString(",PPP_DF,SPP_DF,PPP_SF,SPP_SF,PPP_AR,RTK,PPP_FTTF").split(","));
1253 ik = _rtroverModeComboBox->findText(settings.value("rtroverMode").toString());
1254 if (ik != -1) {
1255 _rtroverModeComboBox->setCurrentIndex(ik);
1256 }
1257 _rtroverModeComboBox->setMinimumWidth(10*ww);
1258
1259 _rtroverRoverMountLineEdit = new QLineEdit(settings.value("rtroverRoverMount").toString());
1260 _rtroverRoverMountLineEdit->setMaximumWidth(8*ww);
1261 _rtroverCorrMountLineEdit = new QLineEdit(settings.value("rtroverCorrMount").toString());
1262 _rtroverCorrMountLineEdit->setMaximumWidth(8*ww);
1263 _rtroverBaseMountLineEdit = new QLineEdit(settings.value("rtroverBaseMount").toString());
1264 _rtroverBaseMountLineEdit->setMaximumWidth(8*ww);
1265 _rtroverRoverRefCrdXLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdX").toString());
1266 _rtroverRoverRefCrdYLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdY").toString());
1267 _rtroverRoverRefCrdZLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdZ").toString());
1268 _rtroverBaseRefCrdXLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdX").toString());
1269 _rtroverBaseRefCrdYLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdY").toString());
1270 _rtroverBaseCrdZLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdZ").toString());
1271 _rtroverRoverDNLineEdit = new QLineEdit(settings.value("rtroverRoverDN").toString());
1272 _rtroverRoverDNLineEdit->setMaximumWidth(6*ww);
1273 _rtroverRoverDELineEdit = new QLineEdit(settings.value("rtroverRoverDE").toString());
1274 _rtroverRoverDELineEdit->setMaximumWidth(6*ww);
1275 _rtroverRoverDULineEdit = new QLineEdit(settings.value("rtroverRoverDU").toString());
1276 _rtroverRoverDULineEdit->setMaximumWidth(6*ww);
1277 _rtroverBaseDNLineEdit = new QLineEdit(settings.value("rtroverBaseDN").toString());
1278 _rtroverBaseDNLineEdit->setMaximumWidth(6*ww);
1279 _rtroverBaseDELineEdit = new QLineEdit(settings.value("rtroverBaseDE").toString());
1280 _rtroverBaseDELineEdit->setMaximumWidth(6*ww);
1281 _rtroverBaseDULineEdit = new QLineEdit(settings.value("rtroverBaseDU").toString());
1282 _rtroverBaseDULineEdit->setMaximumWidth(6*ww);
1283 _rtroverRoverAntennaLineEdit = new QLineEdit(settings.value("rtroverRoverAntenna").toString());
1284 _rtroverBaseAntennaLineEdit = new QLineEdit(settings.value("rtroverBaseAntenna").toString());
1285 _rtroverAntexFileChooser = new qtFileChooser;
1286 _rtroverAntexFileChooser->setMinimumWidth(12*ww);
1287 _rtroverAntexFileChooser->setFileName(settings.value("rtroverAntex").toString());
1288 _rtroverOutputLineEdit = new QLineEdit(settings.value("rtroverOutput").toString());
1289 _rtroverOutputLineEdit->setMinimumWidth(15*ww);
1290
1291 ir = 0;
1292 rtroverLayout->addWidget(new QLabel("Real-Time Rover"), ir, 0, 1, 2, Qt::AlignLeft);
1293 ++ir;
1294 rtroverLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
1295 rtroverLayout->addWidget(_rtroverModeComboBox, ir, 1, Qt::AlignRight);
1296 rtroverLayout->addWidget(_rtroverRoverMountLineEdit, ir, 3, Qt::AlignRight);
1297 rtroverLayout->addWidget(new QLabel("Rover"), ir, 4, Qt::AlignLeft);
1298 rtroverLayout->addWidget(_rtroverCorrMountLineEdit, ir, 5, Qt::AlignRight);
1299 rtroverLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
1300 rtroverLayout->addWidget(_rtroverBaseMountLineEdit, ir, 7, Qt::AlignRight);
1301 rtroverLayout->addWidget(new QLabel("Base"), ir, 8, Qt::AlignLeft);
1302 ++ir;
1303 rtroverLayout->addWidget(new QLabel("Rover coordinates"), ir, 0, Qt::AlignLeft);
1304 rtroverLayout->addWidget(_rtroverRoverRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1305 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1306 rtroverLayout->addWidget(_rtroverRoverRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1307 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1308 rtroverLayout->addWidget(_rtroverRoverRefCrdZLineEdit, ir, 5, Qt::AlignRight);
1309 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1310 ++ir;
1311 rtroverLayout->addWidget(_rtroverRoverDNLineEdit, ir, 1, Qt::AlignRight);
1312 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1313 rtroverLayout->addWidget(_rtroverRoverDELineEdit, ir, 3, Qt::AlignRight);
1314 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1315 rtroverLayout->addWidget(_rtroverRoverDULineEdit, ir, 5, Qt::AlignRight);
1316 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1317 ++ir;
1318 rtroverLayout->addWidget(new QLabel("Base coordinates"), ir, 0, Qt::AlignLeft);
1319 rtroverLayout->addWidget(_rtroverBaseRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1320 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1321 rtroverLayout->addWidget(_rtroverBaseRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1322 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1323 rtroverLayout->addWidget(_rtroverBaseCrdZLineEdit, ir, 5, Qt::AlignRight);
1324 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1325 ++ir;
1326 rtroverLayout->addWidget(_rtroverBaseDNLineEdit, ir, 1, Qt::AlignRight);
1327 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1328 rtroverLayout->addWidget(_rtroverBaseDELineEdit, ir, 3, Qt::AlignRight);
1329 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1330 rtroverLayout->addWidget(_rtroverBaseDULineEdit, ir, 5, Qt::AlignRight);
1331 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1332 ++ir;
1333 rtroverLayout->addWidget(new QLabel("ANTEX"), ir, 0, Qt::AlignLeft);
1334 rtroverLayout->addWidget(_rtroverAntexFileChooser, ir, 1, Qt::AlignRight);
1335 rtroverLayout->addWidget(new QLabel("file"), ir, 2, Qt::AlignLeft);
1336 rtroverLayout->addWidget(_rtroverBaseAntennaLineEdit, ir, 3, Qt::AlignRight);
1337 rtroverLayout->addWidget(new QLabel("Ant. Rover"), ir, 4, Qt::AlignLeft);
1338 rtroverLayout->addWidget(_rtroverRoverAntennaLineEdit, ir, 5, Qt::AlignRight);
1339 rtroverLayout->addWidget(new QLabel("Ant. Base"), ir, 6, Qt::AlignLeft);
1340 ++ir;
1341 rtroverLayout->addWidget(new QLabel("Output"), ir, 0, Qt::AlignLeft);
1342 rtroverLayout->addWidget(_rtroverOutputLineEdit, ir, 1, Qt::AlignRight);
1343
1344 rtroverGroup->setLayout(rtroverLayout);
1345#endif
1346
1347 // Main Layout
1348 // -----------
1349 QGridLayout* mLayout = new QGridLayout;
1350 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1351 mLayout->addWidget(_aogroup, 0,0);
1352 mLayout->addWidget(_mountPointsTable, 1,0);
1353 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1354 mLayout->addWidget(_loggroup, 2,0);
1355
1356 _canvas->setLayout(mLayout);
1357
1358 // WhatsThis
1359 // ---------
1360 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1361 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1362 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1363 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1364 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1365 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1366 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1367 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1368 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1369 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1370 _corrTimeSpinBox->setWhatsThis(tr("<p>Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full corr epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application.</p><p>Specifying a value of '0' means that BNC immediately outputs all incoming Broadcast Epemeris Corrections and does not drop any of them for latency reasons.</p>"));
1371 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1372 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1373 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1374 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1375 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1376 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1377 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1378 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1379
1380 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1381 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1382 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1383 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1384 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1385 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1386 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1387 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1388 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1389 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1390 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1391 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1392 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster. The default values can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1393 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1394 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1395 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1396 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1397 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1398 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1399 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1400 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p>"));
1401 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1402 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1403 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1404 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1405 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1406 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1407 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA-GGA messages coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' only when handling a VRS stream and your serial connected receiver doesn't generate NMEA-GGA messages.</p>"));
1408 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
1409 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
1410 _pppMountLineEdit->setWhatsThis(tr("<p>Specify an observations stream by its mountpoint from the 'Streams' list compiled below if you want BNC to estimate coordinates for the affected receiver position through a PPP solution. Example: 'FFMJ1'</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris referring to the satellites' Antenna Phase Centers (APC). Stream CLK11 on NTRIP broadcaster products.igs-ip.net is an example.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver in low repetition rate or don't come at all from there.</p>"));
1411 _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'. Corrections must refer to satellite Antenna Phase Centers (APC).</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combine Corrections' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
1412 _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
1413 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check following UNAVCO's famous 'teqc' program.</p>"));
1414 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1415 _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
1416 _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
1417 _pppGLONASSCheckBox->setWhatsThis(tr("<p>By default BNC does not use GLONASS observations in PPP mode.</p><p>Tick 'Use GLONASS' for adding GLONASS observations to GPS and Galileo (optional) in a PPP solution.</p>"));
1418 _pppGalileoCheckBox->setWhatsThis(tr("<p>By default BNC does not use Galileo observations in PPP mode.</p><p>Tick 'Use Galileo' for adding Galileo observations to GPS and GLONASS (optional) in a PPP solution.</p>"));
1419 _pppPlotCoordinates->setWhatsThis(tr("<p>BNC will plot PPP results in the 'PPP Plot' tab as North (red), East (green) and Up (blue) displacements when this option is selected. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes.</p><p>Note that a PPP time series makes only sense for a stationary operated receiver."));
1420 _pppNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where PPP results are saved as NMEA messages.</p>"));
1421 _pppNMEAPortLineEdit->setWhatsThis(tr("<p>Specify an IP port number to output PPP results as NMEA messages through an IP port.</p>"));
1422 _pppSigCLineEdit->setWhatsThis(tr("<p>Enter a sigma for your code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of code observations to a PPP solution based on a combination of code and phase data. 5.0 (default) is likely to be an appropriate choice.</p>"));
1423 _pppQuickStartLineEdit->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solution to a known XYZ coordinate as introduced above and adjust a sigma 'XYZ Ini' according to the coordinate's precision. Fixing the coordinate is done in BNC through setting the 'Sigma XYZ Noise' you define below temporarily to zero.</p><p>This so-called Quick-Start option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the know position throughout the startup period.</p><p>A value of 120 is likely to be an appropriate choice for 'Quick-Start'. Default is an empty option field, meaning that you don't want BNC to operate in Quick-Start mode.</p>"));
1424 _pppMaxSolGapLineEdit->setWhatsThis(tr("<p>Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive solutions exceed this limit, the algorithm returns into Quick-Start mode and fixes the introduced reference coordinate for the specified period. A value of '60' seconds could be an appropriate choice.</p><p>This option makes only sense for a stationary operated receiver where solution convergence can be enforced because a good approximation for the rover position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages.</p>"));
1425 _pppAudioResponseLineEdit->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
1426 _pppSigPLineEdit->setWhatsThis(tr("<p>Enter a sigma for your phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of phase observations to a PPP solutions based on a combination of code and phase data. 0.02 (default) is likely to be an appropriate choice.</p>"));
1427 _pppAverageLineEdit->setWhatsThis(tr("<p>Enter the length of a sliding time window in minutes. BNC will continuously output moving average positions computed from those individual positions obtained most recently throughout this period.</p><p>An empty option field (default) means that you don't want BNC to output moving average positions.</p>"));
1428 _pppSigCrd0->setWhatsThis(tr("<p>Enter a sigma in meters for the initial XYZ coordinate componentes. A value of 100.0 (default) may be an appropriate choice. However, this value may be significantly smaller (i.e. 0.01) when starting for example from a station with known XZY position in Quick-Start mode."));
1429 _pppSigCrdP->setWhatsThis(tr("<p>Enter a sigma in meters for the white noise of estimated XYZ coordinate components. A value of 100.0 (default) may be appropriate considering the potential movement of a rover position.</p>"));
1430 _pppSigTrp0->setWhatsThis(tr("<p>Enter a sigma in meters for the a-priory model based tropospheric delay estimation. A value of 0.1 (default) may be an appropriate choice.</p>"));
1431 _pppSigTrpP->setWhatsThis(tr("<p>Enter a sigma in meters per second to describe the expected variation of the tropospheric effect.</p><p>Supposing 1Hz observation data, a value of 3e-6 (default) would mean that the tropospheric effect may vary for 3600 * 3e-6 = 0.01 meters per hour.</p>"));
1432 _pppRefCrdXLineEdit->setWhatsThis(tr("<p>Enter reference coordinate X of the receiver's position.</p><p>This option only makes sense in static observation conditions.</p>"));
1433 _pppRefCrdYLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Y of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1434 _pppRefCrdZLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Z of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1435 _pppRefdNLineEdit->setWhatsThis(tr("<p>Enter north antenna excentricity.</p>"));
1436 _pppRefdELineEdit->setWhatsThis(tr("<p>Enter east antenna excentricity.</p>"));
1437 _pppRefdULineEdit->setWhatsThis(tr("<p>Enter up antenna excentricity.</p>"));
1438 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1439 _pppSync->setWhatsThis(tr(
1440 "<p> Zero value (or empty field, default) means that BNC processes each epoch of data "
1441 "immediately after its arrival using satellite clock corrections available at "
1442 "that time.</p><p> Non-zero value 'Sync Corr' (i.e. 5) means that the epochs of data "
1443 "are buffered and the processing of each epoch is postponed till the satellite clock "
1444 "corrections not older than 'Sync Corr' seconds are available.<p>"));
1445 _pppAntexFileChooser->setWhatsThis(tr("<p>IGS provides a file containing absolute phase center corrections for GNSS satellite and receiver antennas in ANTEX format. Entering the full path to such an ANTEX file is required for correcting observations for antenna phase center offsets and variations. It allows you to specify the name of your receiver's antenna (as contained in the ANTEX file) to apply such corrections.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets and variations.</p>"));
1446 _pppAntennaLineEdit->setWhatsThis(tr("<p>Specify the receiver's antenna name as defined in your ANTEX file. Observations will be corrected for the antenna phase center's offset which may result in a reduction of a few centimeters at max. Corrections for phase center variations are not yet applied by BNC. The specified name must consist of 20 characters. Add trailing blanks if the antenna name has less then 20 characters.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets.</p>"));
1447 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.<ul><li>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</li><li>Note also that you need to tick 'Use GLONASS' which is part ot the 'PPP (2)' panel in case you want to produce an GPS plus GLONASS combination.</li></ul></p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1448 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1449 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval. Clock and orbit corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1450 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1451 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><ul><li>As an SP3 file contents should be referred to the satellites Center of Mass (CoM) while correctors are referred to the satellites Antenna Phase Center (APC), an offset has to be applied which is available from an IGS ANTEX file. You should therefore specify the 'ANTEX File' path under tab 'PPP (2)' if you want to save the stream contents in SP3 format. If you don't specify an 'ANTEX File' path there, the SP3 file contents will be referred to the satellites APCs.</li></ul></p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1452 _postObsFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Observation file."));
1453 _postNavFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Navigation file."));
1454 _postCorrFileChooser->setWhatsThis(tr("Full path to Broadcast Corrections file as previously saved with BNC in plain ASCII format."));
1455 _postOutLineEdit->setWhatsThis(tr("Full path to file with post processing PPP results. "));
1456 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1457 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1458 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1459 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1460 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1461 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1462 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1463 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1464 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1465
1466 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1467 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1468 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1469 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1470 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1471 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1472
1473 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1474 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1475 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1476
1477 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1478 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1479// Weber
1480
1481 // Enable/Disable all Widgets
1482 // --------------------------
1483 slotBncTextChanged();
1484 enableStartStop();
1485
1486 // Auto start
1487 // ----------
1488 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1489 slotStart();
1490 }
1491}
1492
1493// Destructor
1494////////////////////////////////////////////////////////////////////////////
1495bncWindow::~bncWindow() {
1496 delete _caster;
1497 delete _casterEph;
1498}
1499
1500//
1501////////////////////////////////////////////////////////////////////////////
1502void bncWindow::populateMountPointsTable() {
1503
1504 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1505 _mountPointsTable->removeRow(iRow);
1506 }
1507
1508 bncSettings settings;
1509
1510 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1511 int iRow = 0;
1512 while (it.hasNext()) {
1513 QStringList hlp = it.next().split(" ");
1514 if (hlp.size() < 5) continue;
1515 _mountPointsTable->insertRow(iRow);
1516
1517 QUrl url(hlp[0]);
1518
1519 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1520 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1521 QString nmea(hlp[4]);
1522 if (hlp[5] == "S") {
1523 fullPath = hlp[0].replace(0,2,"");
1524 }
1525 QString ntripVersion = "2";
1526 if (hlp.size() >= 6) {
1527 ntripVersion = (hlp[5]);
1528 }
1529
1530 QTableWidgetItem* it;
1531 it = new QTableWidgetItem(url.userInfo());
1532 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1533 _mountPointsTable->setItem(iRow, 0, it);
1534
1535 it = new QTableWidgetItem(fullPath);
1536 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1537 _mountPointsTable->setItem(iRow, 1, it);
1538
1539 it = new QTableWidgetItem(format);
1540 _mountPointsTable->setItem(iRow, 2, it);
1541
1542 if (nmea == "yes") {
1543 it = new QTableWidgetItem(latitude);
1544 _mountPointsTable->setItem(iRow, 3, it);
1545 it = new QTableWidgetItem(longitude);
1546 _mountPointsTable->setItem(iRow, 4, it);
1547 } else {
1548 it = new QTableWidgetItem(latitude);
1549 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1550 _mountPointsTable->setItem(iRow, 3, it);
1551 it = new QTableWidgetItem(longitude);
1552 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1553 _mountPointsTable->setItem(iRow, 4, it);
1554 }
1555
1556 it = new QTableWidgetItem(nmea);
1557 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1558 _mountPointsTable->setItem(iRow, 5, it);
1559
1560 it = new QTableWidgetItem(ntripVersion);
1561 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1562 _mountPointsTable->setItem(iRow, 6, it);
1563
1564 bncTableItem* bncIt = new bncTableItem();
1565 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1566 _mountPointsTable->setItem(iRow, 7, bncIt);
1567
1568 iRow++;
1569 }
1570
1571 _mountPointsTable->sortItems(1);
1572
1573 enableStartStop();
1574}
1575
1576// Retrieve Table
1577////////////////////////////////////////////////////////////////////////////
1578void bncWindow::slotAddMountPoints() {
1579
1580 bncSettings settings;
1581 QString proxyHost = settings.value("proxyHost").toString();
1582 int proxyPort = settings.value("proxyPort").toInt();
1583 if (proxyHost != _proxyHostLineEdit->text() ||
1584 proxyPort != _proxyPortLineEdit->text().toInt()) {
1585 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1586 "changed. Use the new ones?",
1587 QMessageBox::Yes, QMessageBox::No,
1588 QMessageBox::NoButton);
1589 if (iRet == QMessageBox::Yes) {
1590 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1591 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1592 }
1593 }
1594
1595 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1596 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1597
1598 QMessageBox msgBox;
1599 msgBox.setIcon(QMessageBox::Question);
1600 msgBox.setWindowTitle("Add Stream");
1601 msgBox.setText("Add stream(s) coming from:");
1602
1603 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1604 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1605 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1606 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1607 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1608
1609 msgBox.exec();
1610
1611 if (msgBox.clickedButton() == buttonNtrip) {
1612 bncTableDlg* dlg = new bncTableDlg(this);
1613 dlg->move(this->pos().x()+50, this->pos().y()+50);
1614 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1615 this, SLOT(slotNewMountPoints(QStringList*)));
1616 dlg->exec();
1617 delete dlg;
1618 } else if (msgBox.clickedButton() == buttonIP) {
1619 bncIpPort* ipp = new bncIpPort(this);
1620 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1621 this, SLOT(slotNewMountPoints(QStringList*)));
1622 ipp->exec();
1623 delete ipp;
1624 } else if (msgBox.clickedButton() == buttonUDP) {
1625 bncUdpPort* udp = new bncUdpPort(this);
1626 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1627 this, SLOT(slotNewMountPoints(QStringList*)));
1628 udp->exec();
1629 delete udp;
1630 } else if (msgBox.clickedButton() == buttonSerial) {
1631 bncSerialPort* sep = new bncSerialPort(this);
1632 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1633 this, SLOT(slotNewMountPoints(QStringList*)));
1634 sep->exec();
1635 delete sep;
1636 } else if (msgBox.clickedButton() == buttonCancel) {
1637 // Cancel
1638 }
1639
1640 enableStartStop();
1641}
1642
1643// Delete Selected Mount Points
1644////////////////////////////////////////////////////////////////////////////
1645void bncWindow::slotDeleteMountPoints() {
1646
1647 int nRows = _mountPointsTable->rowCount();
1648 bool flg[nRows];
1649 for (int iRow = 0; iRow < nRows; iRow++) {
1650 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1651 flg[iRow] = true;
1652 }
1653 else {
1654 flg[iRow] = false;
1655 }
1656 }
1657 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1658 if (flg[iRow]) {
1659 _mountPointsTable->removeRow(iRow);
1660 }
1661 }
1662 _actDeleteMountPoints->setEnabled(false);
1663
1664 enableStartStop();
1665}
1666
1667// New Mount Points Selected
1668////////////////////////////////////////////////////////////////////////////
1669void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1670 int iRow = 0;
1671 QListIterator<QString> it(*mountPoints);
1672 while (it.hasNext()) {
1673 QStringList hlp = it.next().split(" ");
1674 QUrl url(hlp[0]);
1675 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1676 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1677 QString nmea(hlp[4]);
1678 if (hlp[5] == "S") {
1679 fullPath = hlp[0].replace(0,2,"");
1680 }
1681 QString ntripVersion = "2";
1682 if (hlp.size() >= 6) {
1683 ntripVersion = (hlp[5]);
1684 }
1685
1686 _mountPointsTable->insertRow(iRow);
1687
1688 QTableWidgetItem* it;
1689 it = new QTableWidgetItem(url.userInfo());
1690 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1691 _mountPointsTable->setItem(iRow, 0, it);
1692
1693 it = new QTableWidgetItem(fullPath);
1694 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1695 _mountPointsTable->setItem(iRow, 1, it);
1696
1697 it = new QTableWidgetItem(format);
1698 _mountPointsTable->setItem(iRow, 2, it);
1699
1700 if (nmea == "yes") {
1701 it = new QTableWidgetItem(latitude);
1702 _mountPointsTable->setItem(iRow, 3, it);
1703 it = new QTableWidgetItem(longitude);
1704 _mountPointsTable->setItem(iRow, 4, it);
1705 } else {
1706 it = new QTableWidgetItem(latitude);
1707 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1708 _mountPointsTable->setItem(iRow, 3, it);
1709 it = new QTableWidgetItem(longitude);
1710 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1711 _mountPointsTable->setItem(iRow, 4, it);
1712 }
1713
1714 it = new QTableWidgetItem(nmea);
1715 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1716 _mountPointsTable->setItem(iRow, 5, it);
1717
1718 it = new QTableWidgetItem(ntripVersion);
1719 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1720 _mountPointsTable->setItem(iRow, 6, it);
1721
1722 bncTableItem* bncIt = new bncTableItem();
1723 _mountPointsTable->setItem(iRow, 7, bncIt);
1724
1725 iRow++;
1726 }
1727 _mountPointsTable->hideColumn(0);
1728 _mountPointsTable->sortItems(1);
1729 delete mountPoints;
1730
1731 enableStartStop();
1732}
1733
1734// Save Options (serialize)
1735////////////////////////////////////////////////////////////////////////////
1736void bncWindow::slotSaveOptions() {
1737 saveOptions();
1738 bncSettings settings;
1739 settings.sync();
1740}
1741
1742// Save Options (memory only)
1743////////////////////////////////////////////////////////////////////////////
1744void bncWindow::saveOptions() {
1745
1746 QStringList mountPoints;
1747 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1748
1749 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1750 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1751 "@" + _mountPointsTable->item(iRow, 1)->text() );
1752
1753 mountPoints.append(url.toString() + " " +
1754 _mountPointsTable->item(iRow, 2)->text()
1755 + " " + _mountPointsTable->item(iRow, 3)->text()
1756 + " " + _mountPointsTable->item(iRow, 4)->text()
1757 + " " + _mountPointsTable->item(iRow, 5)->text()
1758 + " " + _mountPointsTable->item(iRow, 6)->text());
1759 } else {
1760 mountPoints.append(
1761 "//" + _mountPointsTable->item(iRow, 1)->text()
1762 + " " + _mountPointsTable->item(iRow, 2)->text()
1763 + " " + _mountPointsTable->item(iRow, 3)->text()
1764 + " " + _mountPointsTable->item(iRow, 4)->text()
1765 + " " + _mountPointsTable->item(iRow, 5)->text()
1766 + " " + _mountPointsTable->item(iRow, 6)->text());
1767 }
1768 }
1769
1770 QStringList combineStreams;
1771 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1772 QString hlp;
1773 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1774 if (_cmbTable->item(iRow, iCol)) {
1775 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1776 }
1777 }
1778 if (!hlp.isEmpty()) {
1779 combineStreams << hlp;
1780 }
1781 }
1782
1783 QStringList uploadMountpointsOut;
1784 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1785 QString hlp;
1786 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1787 if (_uploadTable->cellWidget(iRow, iCol) &&
1788 (iCol == 3 || iCol == 4 || iCol == 5)) {
1789 if (iCol == 3) {
1790 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1791 hlp += passwd->text() + ",";
1792 }
1793 else if (iCol == 4) {
1794 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1795 hlp += system->currentText() + ",";
1796 }
1797 else if (iCol == 5) {
1798 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1799 QString state; state.setNum(com->checkState());
1800 hlp += state + ",";
1801 }
1802 }
1803 else if (_uploadTable->item(iRow, iCol)) {
1804 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1805 }
1806 }
1807 if (!hlp.isEmpty()) {
1808 uploadMountpointsOut << hlp;
1809 }
1810 }
1811
1812 bncSettings settings;
1813
1814 settings.setValue("startTab", _aogroup->currentIndex());
1815 settings.setValue("statusTab", _loggroup->currentIndex());
1816 settings.setValue("mountPoints", mountPoints);
1817// Network
1818 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1819 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1820 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1821 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1822// General
1823 settings.setValue("logFile", _logFileLineEdit->text());
1824 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1825 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1826 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1827 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1828// RINEX Observations
1829 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1830 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1831 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1832 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1833 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1834 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1835// RINEX Ephemeris
1836 settings.setValue("ephPath", _ephPathLineEdit->text());
1837 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1838 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1839 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1840// Broadcast Corrections
1841 settings.setValue("corrPath", _corrPathLineEdit->text());
1842 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1843 settings.setValue("corrPort", _corrPortLineEdit->text());
1844 settings.setValue("corrTime", _corrTimeSpinBox->value());
1845// Feed Engine
1846 settings.setValue("outPort", _outPortLineEdit->text());
1847 settings.setValue("waitTime", _waitTimeSpinBox->value());
1848 settings.setValue("binSampl", _binSamplSpinBox->value());
1849 settings.setValue("outFile", _outFileLineEdit->text());
1850 settings.setValue("outUPort", _outUPortLineEdit->text());
1851// Serial Output
1852 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1853 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1854 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1855 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1856 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1857 settings.setValue("serialParity", _serialParityComboBox->currentText());
1858 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1859 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1860 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1861 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1862// Outages
1863 settings.setValue("obsRate", _obsRateComboBox->currentText());
1864 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1865 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1866 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1867// Miscellaneous
1868 settings.setValue("miscMount", _miscMountLineEdit->text());
1869 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1870 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1871// PPPP
1872 settings.setValue("pppSPP", _pppSPPComboBox->currentText());
1873 settings.setValue("pppMount", _pppMountLineEdit->text());
1874 settings.setValue("pppCorrMount",_pppCorrMountLineEdit->text());
1875 settings.setValue("pppRefCrdX", _pppRefCrdXLineEdit->text());
1876 settings.setValue("pppRefCrdY", _pppRefCrdYLineEdit->text());
1877 settings.setValue("pppRefCrdZ", _pppRefCrdZLineEdit->text());
1878 settings.setValue("pppRefdN", _pppRefdNLineEdit->text());
1879 settings.setValue("pppRefdE", _pppRefdELineEdit->text());
1880 settings.setValue("pppRefdU", _pppRefdULineEdit->text());
1881 settings.setValue("nmeaFile", _pppNMEALineEdit->text());
1882 settings.setValue("nmeaPort", _pppNMEAPortLineEdit->text());
1883 settings.setValue("pppPlotCoordinates", _pppPlotCoordinates->checkState());
1884 settings.setValue("postObsFile", _postObsFileChooser->fileName());
1885 settings.setValue("postNavFile", _postNavFileChooser->fileName());
1886 settings.setValue("postCorrFile", _postCorrFileChooser->fileName());
1887 settings.setValue("postOutFile", _postOutLineEdit->text());
1888 settings.setValue("pppAntenna", _pppAntennaLineEdit->text());
1889 settings.setValue("pppAntex", _pppAntexFileChooser->fileName());
1890 settings.setValue("pppUsePhase", _pppUsePhaseCheckBox->checkState());
1891 settings.setValue("pppEstTropo", _pppEstTropoCheckBox->checkState());
1892 settings.setValue("pppGLONASS", _pppGLONASSCheckBox->checkState());
1893 settings.setValue("pppGalileo", _pppGalileoCheckBox->checkState());
1894 settings.setValue("pppSync", _pppSync->text());
1895 settings.setValue("pppAverage", _pppAverageLineEdit->text());
1896 settings.setValue("pppQuickStart", _pppQuickStartLineEdit->text());
1897 settings.setValue("pppMaxSolGap", _pppMaxSolGapLineEdit->text());
1898 settings.setValue("pppAudioResponse", _pppAudioResponseLineEdit->text());
1899 settings.setValue("pppSigmaCode",_pppSigCLineEdit->text());
1900 settings.setValue("pppSigmaPhase",_pppSigPLineEdit->text());
1901 settings.setValue("pppSigCrd0",_pppSigCrd0->text());
1902 settings.setValue("pppSigCrdP",_pppSigCrdP->text());
1903 settings.setValue("pppSigTrp0",_pppSigTrp0->text());
1904 settings.setValue("pppSigTrpP",_pppSigTrpP->text());
1905// Reqc
1906 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1907 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1908 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1909 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1910 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1911 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1912 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1913 settings.setValue("reqcSkyPlotSystems", _reqcSkyPlotSystems->currentText());
1914// Combine Corrections
1915 if (!combineStreams.isEmpty()) {
1916 settings.setValue("combineStreams", combineStreams);
1917 }
1918 else {
1919 settings.setValue("combineStreams", "");
1920 }
1921 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1922 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1923 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1924// Upload Corrections
1925 if (!uploadMountpointsOut.isEmpty()) {
1926 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1927 }
1928 else {
1929 settings.setValue("uploadMountpointsOut", "");
1930 }
1931 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1932 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1933 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1934 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1935// Upload Ephemeris
1936 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1937 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1938 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1939 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1940 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1941
1942#ifdef RTROVER_INTERFACE
1943 settings.setValue("rtroverMode", _rtroverModeComboBox->currentText());
1944 settings.setValue("rtroverRoverMount", _rtroverRoverMountLineEdit->text());
1945 settings.setValue("rtroverCorrMount", _rtroverCorrMountLineEdit->text());
1946 settings.setValue("rtroverBaseMount", _rtroverBaseMountLineEdit->text());
1947 settings.setValue("rtroverRoverRefCrdX", _rtroverRoverRefCrdXLineEdit->text());
1948 settings.setValue("rtroverRoverRefCrdY", _rtroverRoverRefCrdYLineEdit->text());
1949 settings.setValue("rtroverRoverRefCrdZ", _rtroverRoverRefCrdZLineEdit->text());
1950 settings.setValue("rtroverBaseRefCrdX", _rtroverBaseRefCrdXLineEdit->text());
1951 settings.setValue("rtroverBaseRefCrdY", _rtroverBaseRefCrdYLineEdit->text());
1952 settings.setValue("rtroverBaseRefCrdZ", _rtroverBaseCrdZLineEdit->text());
1953 settings.setValue("rtroverRoverDN", _rtroverRoverDNLineEdit->text());
1954 settings.setValue("rtroverRoverDE", _rtroverRoverDELineEdit->text());
1955 settings.setValue("rtroverRoverDU", _rtroverRoverDULineEdit->text());
1956 settings.setValue("rtroverBaseDN", _rtroverBaseDNLineEdit->text());
1957 settings.setValue("rtroverBaseDE", _rtroverBaseDELineEdit->text());
1958 settings.setValue("rtroverBaseDU", _rtroverBaseDULineEdit->text());
1959 settings.setValue("rtroverRoverAntenna", _rtroverRoverAntennaLineEdit->text());
1960 settings.setValue("rtroverBaseAntenna", _rtroverBaseAntennaLineEdit->text());
1961 settings.setValue("rtroverAntex", _rtroverAntexFileChooser->fileName());
1962 settings.setValue("rtroverOutput", _rtroverOutputLineEdit->text());
1963#endif
1964
1965 if (_caster) {
1966 _caster->readMountPoints();
1967 }
1968}
1969
1970// All get slots terminated
1971////////////////////////////////////////////////////////////////////////////
1972void bncWindow::slotGetThreadsFinished() {
1973 BNC_CORE->slotMessage("All Get Threads Terminated", true);
1974 delete _caster; _caster = 0;
1975 delete _casterEph; _casterEph = 0;
1976 _runningRealTime = false;
1977}
1978
1979// Start It!
1980////////////////////////////////////////////////////////////////////////////
1981void bncWindow::slotStart() {
1982 saveOptions();
1983 if ( _pppSPPComboBox->currentText() == "Post-Processing" ) {
1984 startPostProcessingPPP();
1985 }
1986 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1987 startPostProcessingReqc();
1988 }
1989 else {
1990 startRealTime();
1991 }
1992}
1993
1994// Start Real-Time (Retrieve Data etc.)
1995////////////////////////////////////////////////////////////////////////////
1996void bncWindow::startRealTime() {
1997
1998 _runningRealTime = true;
1999
2000 _bncFigurePPP->reset();
2001
2002 _actDeleteMountPoints->setEnabled(false);
2003
2004 enableStartStop();
2005
2006 _caster = new bncCaster(_outFileLineEdit->text(),
2007 _outPortLineEdit->text().toInt());
2008
2009 BNC_CORE->setPort(_outEphPortLineEdit->text().toInt());
2010 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2011 BNC_CORE->initCombination();
2012
2013 connect(_caster, SIGNAL(getThreadsFinished()),
2014 this, SLOT(slotGetThreadsFinished()));
2015
2016 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2017 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2018
2019 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " =========", true);
2020
2021 bncSettings settings;
2022
2023 QDir rnxdir(settings.value("rnxPath").toString());
2024 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2025
2026 QString rnx_file = settings.value("rnxScript").toString();
2027 if ( !rnx_file.isEmpty() ) {
2028 QFile rnxfile(settings.value("rnxScript").toString());
2029 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2030 }
2031
2032 QDir ephdir(settings.value("ephPath").toString());
2033 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2034
2035 QDir corrdir(settings.value("corrPath").toString());
2036 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2037
2038 QString advise_file = settings.value("adviseScript").toString();
2039 if ( !advise_file.isEmpty() ) {
2040 QFile advisefile(settings.value("adviseScript").toString());
2041 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2042 }
2043
2044 QString ant_file = settings.value("pppAntex").toString();
2045 if ( !ant_file.isEmpty() ) {
2046 QFile anxfile(settings.value("pppAntex").toString());
2047 if (!anxfile.exists()) BNC_CORE->slotMessage("Cannot find IGS ANTEX file", true);
2048 }
2049
2050 _caster->readMountPoints();
2051
2052 _casterEph = new bncEphUploadCaster();
2053 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2054 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2055}
2056
2057// Retrieve Data
2058////////////////////////////////////////////////////////////////////////////
2059void bncWindow::slotStop() {
2060 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
2061 QMessageBox::Yes, QMessageBox::No,
2062 QMessageBox::NoButton);
2063 if (iRet == QMessageBox::Yes) {
2064 BNC_CORE->stopCombination();
2065 delete _caster; _caster = 0;
2066 delete _casterEph; _casterEph = 0;
2067 _runningRealTime = false;
2068 enableStartStop();
2069 }
2070}
2071
2072// Close Application gracefully
2073////////////////////////////////////////////////////////////////////////////
2074void bncWindow::closeEvent(QCloseEvent* event) {
2075
2076 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2077 QMessageBox::Yes, QMessageBox::No,
2078 QMessageBox::Cancel);
2079
2080 if (iRet == QMessageBox::Cancel) {
2081 event->ignore();
2082 return;
2083 }
2084 else if (iRet == QMessageBox::Yes) {
2085 slotSaveOptions();
2086 }
2087
2088 QMainWindow::closeEvent(event);
2089}
2090
2091// User changed the selection of mountPoints
2092////////////////////////////////////////////////////////////////////////////
2093void bncWindow::slotSelectionChanged() {
2094 if (_mountPointsTable->selectedItems().isEmpty()) {
2095 _actDeleteMountPoints->setEnabled(false);
2096 }
2097 else {
2098 _actDeleteMountPoints->setEnabled(true);
2099 }
2100}
2101
2102// Display Program Messages
2103////////////////////////////////////////////////////////////////////////////
2104void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2105
2106#ifdef DEBUG_RTCM2_2021
2107 const int maxBufferSize = 1000;
2108#else
2109 const int maxBufferSize = 10000;
2110#endif
2111
2112 if (! showOnScreen ) {
2113 return;
2114 }
2115
2116 QString txt = _log->toPlainText() + "\n" +
2117 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
2118 _log->clear();
2119 _log->append(txt.right(maxBufferSize));
2120}
2121
2122// About Message
2123////////////////////////////////////////////////////////////////////////////
2124void bncWindow::slotAbout() {
2125 new bncAboutDlg(0);
2126}
2127
2128//Flowchart
2129////////////////////////////////////////////////////////////////////////////
2130void bncWindow::slotFlowchart() {
2131 new bncFlowchartDlg(0);
2132}
2133
2134// Help Window
2135////////////////////////////////////////////////////////////////////////////
2136void bncWindow::slotHelp() {
2137 QUrl url;
2138 url.setPath(":bnchelp.html");
2139 new bncHlpDlg(0, url);
2140}
2141
2142// Select Fonts
2143////////////////////////////////////////////////////////////////////////////
2144void bncWindow::slotFontSel() {
2145 bool ok;
2146 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2147 if (ok) {
2148 bncSettings settings;
2149 settings.setValue("font", newFont.toString());
2150 QApplication::setFont(newFont);
2151 int ww = QFontMetrics(newFont).width('w');
2152 setMinimumSize(60*ww, 80*ww);
2153 resize(60*ww, 80*ww);
2154 }
2155}
2156
2157// Whats This Help
2158void bncWindow::slotWhatsThis() {
2159 QWhatsThis::enterWhatsThisMode();
2160}
2161
2162//
2163////////////////////////////////////////////////////////////////////////////
2164void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2165 _threads = threads;
2166
2167 _bncFigure->updateMountPoints();
2168 _bncFigureLate->updateMountPoints();
2169
2170 populateMountPointsTable();
2171 bncSettings settings;
2172 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
2173 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
2174 QListIterator<bncGetThread*> iTh(threads);
2175 while (iTh.hasNext()) {
2176 bncGetThread* thread = iTh.next();
2177 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2178 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2179 "@" + _mountPointsTable->item(iRow, 1)->text() );
2180 if (url == thread->mountPoint() &&
2181 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
2182 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
2183 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
2184 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2185 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2186 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2187 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2188 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2189 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2190 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2191 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2192 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2193 disconnect(thread,
2194 SIGNAL(newPosition(bncTime, double, double, double)),
2195 _bncFigurePPP,
2196 SLOT(slotNewPosition(bncTime, double, double, double)));
2197 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2198 _bncFigurePPP,
2199 SLOT(slotNewPosition(bncTime, double, double, double)));
2200 }
2201#ifdef QT_WEBKIT
2202 if (_mapWin) {
2203 disconnect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2204 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2205 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2206 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2207 }
2208#endif
2209 break;
2210 }
2211 }
2212 }
2213}
2214
2215//
2216////////////////////////////////////////////////////////////////////////////
2217void bncWindow::CreateMenu() {
2218 // Create Menus
2219 // ------------
2220 _menuFile = menuBar()->addMenu(tr("&File"));
2221 _menuFile->addAction(_actFontSel);
2222 _menuFile->addSeparator();
2223 _menuFile->addAction(_actSaveOpt);
2224 _menuFile->addSeparator();
2225 _menuFile->addAction(_actQuit);
2226
2227 _menuHlp = menuBar()->addMenu(tr("&Help"));
2228 _menuHlp->addAction(_actHelp);
2229 _menuHlp->addAction(_actFlowchart);
2230 _menuHlp->addAction(_actAbout);
2231}
2232
2233// Toolbar
2234////////////////////////////////////////////////////////////////////////////
2235void bncWindow::AddToolbar() {
2236 QToolBar* toolBar = new QToolBar;
2237 addToolBar(Qt::BottomToolBarArea, toolBar);
2238 toolBar->setMovable(false);
2239 toolBar->addAction(_actAddMountPoints);
2240 toolBar->addAction(_actDeleteMountPoints);
2241 toolBar->addAction(_actMapMountPoints);
2242 toolBar->addAction(_actStart);
2243 toolBar->addAction(_actStop);
2244 toolBar->addWidget(new QLabel(" "));
2245 toolBar->addAction(_actwhatsthis);
2246}
2247
2248// About
2249////////////////////////////////////////////////////////////////////////////
2250bncAboutDlg::bncAboutDlg(QWidget* parent) :
2251 QDialog(parent) {
2252
2253 QTextBrowser* tb = new QTextBrowser;
2254 QUrl url; url.setPath(":bncabout.html");
2255 tb->setSource(url);
2256 tb->setReadOnly(true);
2257
2258 int ww = QFontMetrics(font()).width('w');
2259 QPushButton* _closeButton = new QPushButton("Close");
2260 _closeButton->setMaximumWidth(10*ww);
2261 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2262
2263 QGridLayout* dlgLayout = new QGridLayout();
2264 QLabel* img = new QLabel();
2265 img->setPixmap(QPixmap(":ntrip-logo.png"));
2266 dlgLayout->addWidget(img, 0,0);
2267 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2268 dlgLayout->addWidget(tb,1,0,1,2);
2269 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2270
2271 setLayout(dlgLayout);
2272 resize(60*ww, 60*ww);
2273 setWindowTitle("About BNC");
2274 show();
2275}
2276
2277//
2278////////////////////////////////////////////////////////////////////////////
2279bncAboutDlg::~bncAboutDlg() {
2280};
2281
2282// Flowchart
2283////////////////////////////////////////////////////////////////////////////
2284bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2285 QDialog(parent) {
2286
2287 int ww = QFontMetrics(font()).width('w');
2288 QPushButton* _closeButton = new QPushButton("Close");
2289 _closeButton->setMaximumWidth(10*ww);
2290 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2291
2292 QGridLayout* dlgLayout = new QGridLayout();
2293 QLabel* img = new QLabel();
2294 img->setPixmap(QPixmap(":bncflowchart.png"));
2295 dlgLayout->addWidget(img, 0,0);
2296 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2297
2298 setLayout(dlgLayout);
2299 setWindowTitle("Flow Chart");
2300 show();
2301}
2302
2303//
2304////////////////////////////////////////////////////////////////////////////
2305bncFlowchartDlg::~bncFlowchartDlg() {
2306};
2307
2308// Enable/Disable Widget (and change its color)
2309////////////////////////////////////////////////////////////////////////////
2310void bncWindow::enableWidget(bool enable, QWidget* widget) {
2311 const static QPalette paletteWhite(QColor(255, 255, 255));
2312 const static QPalette paletteGray(QColor(230, 230, 230));
2313
2314 widget->setEnabled(enable);
2315 if (enable) {
2316 widget->setPalette(paletteWhite);
2317 }
2318 else {
2319 widget->setPalette(paletteGray);
2320 }
2321}
2322
2323// Bnc Text
2324////////////////////////////////////////////////////////////////////////////
2325void bncWindow::slotBncTextChanged(){
2326
2327 bool enable = true;
2328
2329 // Proxy
2330 //------
2331 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2332 enable = !_proxyHostLineEdit->text().isEmpty();
2333 enableWidget(enable, _proxyPortLineEdit);
2334 }
2335
2336 // RINEX Observations
2337 // ------------------
2338 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2339 enable = !_rnxPathLineEdit->text().isEmpty();
2340 enableWidget(enable, _rnxSamplSpinBox);
2341 enableWidget(enable, _rnxSkelLineEdit);
2342 enableWidget(enable, _rnxScrpLineEdit);
2343 enableWidget(enable, _rnxV3CheckBox);
2344 enableWidget(enable, _rnxIntrComboBox);
2345 }
2346
2347 // RINEX Ephemeris
2348 // ---------------
2349 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2350 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2351 enableWidget(enable, _ephIntrComboBox);
2352 enableWidget(enable, _ephV3CheckBox);
2353 }
2354
2355 // Broadcast Corrections
2356 // ---------------------
2357 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2358 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2359 enableWidget(enable, _corrIntrComboBox);
2360 }
2361
2362 // Feed Engine
2363 // -----------
2364 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2365 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2366 enableWidget(enable, _waitTimeSpinBox);
2367 enableWidget(enable, _binSamplSpinBox);
2368 }
2369
2370 // Serial Output
2371 // -------------
2372 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2373 sender() == _serialAutoNMEAComboBox) {
2374 enable = !_serialMountPointLineEdit->text().isEmpty();
2375 enableWidget(enable, _serialPortNameLineEdit);
2376 enableWidget(enable, _serialBaudRateComboBox);
2377 enableWidget(enable, _serialParityComboBox);
2378 enableWidget(enable, _serialDataBitsComboBox);
2379 enableWidget(enable, _serialStopBitsComboBox);
2380 enableWidget(enable, _serialFlowControlComboBox);
2381 enableWidget(enable, _serialAutoNMEAComboBox);
2382
2383 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() != "Auto";
2384 enableWidget(enable2, _serialFileNMEALineEdit);
2385 }
2386
2387 // Outages
2388 // -------
2389 if (sender() == 0 || sender() == _obsRateComboBox) {
2390 enable = !_obsRateComboBox->currentText().isEmpty();
2391 enableWidget(enable, _adviseFailSpinBox);
2392 enableWidget(enable, _adviseRecoSpinBox);
2393 enableWidget(enable, _adviseScriptLineEdit);
2394 }
2395
2396 // Miscellaneous
2397 // -------------
2398 if (sender() == 0 || sender() == _miscMountLineEdit) {
2399 enable = !_miscMountLineEdit->text().isEmpty();
2400 enableWidget(enable, _perfIntrComboBox);
2401 enableWidget(enable, _scanRTCMCheckBox);
2402 }
2403
2404 // Enable/disable Broadcast Ephemerides
2405 // ------------------------------------
2406 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2407 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2408 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2409 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2410 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2411 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2412 _uploadEphPortLineEdit->setEnabled(true);
2413 _uploadEphMountpointLineEdit->setEnabled(true);
2414 _uploadEphPasswordLineEdit->setEnabled(true);
2415 _uploadEphSampleSpinBox->setEnabled(true);
2416 }
2417 else {
2418 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2419 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2420 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2421 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2422 _uploadEphPortLineEdit->setEnabled(false);
2423 _uploadEphMountpointLineEdit->setEnabled(false);
2424 _uploadEphPasswordLineEdit->setEnabled(false);
2425 _uploadEphSampleSpinBox->setEnabled(false);
2426 }
2427 }
2428
2429 // Combine Corrections
2430 // -------------------
2431 if (sender() == 0 || sender() == _cmbTable) {
2432 int iRow = _cmbTable->rowCount();
2433 if (iRow > 0) {
2434 enableWidget(true, _cmbMethodComboBox);
2435 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2436 _cmbMaxresLineEdit->setEnabled(true);
2437 _cmbSamplSpinBox->setEnabled(true);
2438 }
2439 else {
2440 enableWidget(false, _cmbMethodComboBox);
2441 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2442 _cmbMaxresLineEdit->setEnabled(false);
2443 _cmbSamplSpinBox->setEnabled(false);
2444 }
2445 }
2446
2447 // Upload(clk)
2448 // -----------
2449 int iRow = _uploadTable->rowCount();
2450 if (iRow > 0) {
2451 enableWidget(true, _uploadIntrComboBox);
2452 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2453 enableWidget(true, _uploadSamplClkRnxSpinBox);
2454 enableWidget(true, _uploadSamplSp3SpinBox);
2455 }
2456 else {
2457 enableWidget(false, _uploadIntrComboBox);
2458 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2459 enableWidget(false, _uploadSamplClkRnxSpinBox);
2460 enableWidget(false, _uploadSamplSp3SpinBox);
2461 }
2462
2463 // PPP Client
2464 // ----------
2465 if (sender() == 0
2466 || sender() == _pppMountLineEdit
2467 || sender() == _pppCorrMountLineEdit
2468 || sender() == _pppRefCrdXLineEdit
2469 || sender() == _pppRefCrdYLineEdit
2470 || sender() == _pppRefCrdZLineEdit
2471 || sender() == _pppRefdNLineEdit
2472 || sender() == _pppRefdELineEdit
2473 || sender() == _pppRefdULineEdit
2474 || sender() == _pppSync
2475 || sender() == _pppSPPComboBox
2476 || sender() == _pppQuickStartLineEdit
2477 || sender() == _pppEstTropoCheckBox
2478 || sender() == _pppUsePhaseCheckBox
2479 || sender() == _pppAntexFileChooser ) {
2480
2481 enable = !_pppSPPComboBox->currentText().isEmpty();
2482 if (enable) {
2483 enable = (!_pppMountLineEdit->text().isEmpty() && !_pppCorrMountLineEdit->text().isEmpty()) ||
2484 (!_pppMountLineEdit->text().isEmpty() && _pppSPPComboBox->currentText() == "Realtime-SPP") ||
2485 (_pppSPPComboBox->currentText() == "Post-Processing");
2486 }
2487
2488 enableWidget(enable, _pppNMEALineEdit);
2489 enableWidget(enable, _pppNMEAPortLineEdit);
2490 enableWidget(enable, _pppRefCrdXLineEdit);
2491 enableWidget(enable, _pppRefCrdYLineEdit);
2492 enableWidget(enable, _pppRefCrdZLineEdit);
2493 enableWidget(enable, _pppRefdNLineEdit);
2494 enableWidget(enable, _pppRefdELineEdit);
2495 enableWidget(enable, _pppRefdULineEdit);
2496 enableWidget(enable, _pppUsePhaseCheckBox);
2497 enableWidget(enable, _pppPlotCoordinates);
2498 enableWidget(enable, _pppEstTropoCheckBox);
2499// enableWidget(enable, _pppGLONASSCheckBox);
2500 enableWidget(enable, _pppGalileoCheckBox);
2501// enableWidget(enable, _pppAntexFileChooser);
2502 enableWidget(enable, _pppSigCLineEdit);
2503 enableWidget(enable, _pppSigCrd0);
2504 enableWidget(enable, _pppSigCrdP);
2505
2506 bool enable2 = enable && !_pppRefCrdXLineEdit->text().isEmpty() &&
2507 !_pppRefCrdYLineEdit->text().isEmpty() &&
2508 !_pppRefCrdZLineEdit->text().isEmpty();
2509
2510 enableWidget(enable2, _pppAverageLineEdit);
2511 enableWidget(enable2, _pppQuickStartLineEdit);
2512
2513 bool enable3 = enable2 && !_pppQuickStartLineEdit->text().isEmpty();
2514 enableWidget(enable3, _pppMaxSolGapLineEdit);
2515 enableWidget(enable3, _pppAudioResponseLineEdit);
2516
2517 bool enable4 = enable && !_pppAntexFileChooser->fileName().isEmpty();
2518 enableWidget(enable4, _pppAntennaLineEdit);
2519
2520 bool enable5 = enable && _pppEstTropoCheckBox->isChecked();
2521 enableWidget(enable5, _pppSigTrp0);
2522 enableWidget(enable5, _pppSigTrpP);
2523
2524 bool enable6 = enable && _pppUsePhaseCheckBox->isChecked();
2525 enableWidget(enable6, _pppSigPLineEdit);
2526
2527 bool enable7 = enable && _pppSPPComboBox->currentText() == "Realtime-PPP";
2528 enableWidget(enable7, _pppSync);
2529
2530 bool enable8 = _pppSPPComboBox->currentText() == "Realtime-PPP";
2531 enableWidget(enable8, _pppCorrMountLineEdit);
2532
2533 bool enable9 = _pppSPPComboBox->currentText() == "Post-Processing";
2534 enableWidget(enable9, _postObsFileChooser);
2535 enableWidget(enable9, _postNavFileChooser);
2536 enableWidget(enable9, _postCorrFileChooser);
2537 enableWidget(enable9, _postOutLineEdit);
2538
2539 bool enable10 = !_pppSPPComboBox->currentText().isEmpty() && !enable9;
2540 enableWidget(enable10, _pppMountLineEdit);
2541 }
2542
2543 if (sender() == 0 || sender() == _reqcActionComboBox) {
2544 enable = !_reqcActionComboBox->currentText().isEmpty();
2545 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2546 enableWidget(enable && enable10, _reqcEditOptionButton);
2547 enableWidget(enable, _reqcObsFileChooser);
2548 enableWidget(enable, _reqcNavFileChooser);
2549 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2550 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2551 enableWidget(enable, _reqcOutLogLineEdit);
2552 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2553 enableWidget(enable && !enable10, _reqcSkyPlotSystems);
2554 }
2555
2556 enableStartStop();
2557}
2558
2559//
2560////////////////////////////////////////////////////////////////////////////
2561void bncWindow::slotAddCmbRow() {
2562 int iRow = _cmbTable->rowCount();
2563 _cmbTable->insertRow(iRow);
2564 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2565 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2566 }
2567}
2568
2569//
2570////////////////////////////////////////////////////////////////////////////
2571void bncWindow::slotDelCmbRow() {
2572 int nRows = _cmbTable->rowCount();
2573 bool flg[nRows];
2574 for (int iRow = 0; iRow < nRows; iRow++) {
2575 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2576 flg[iRow] = true;
2577 }
2578 else {
2579 flg[iRow] = false;
2580 }
2581 }
2582 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2583 if (flg[iRow]) {
2584 _cmbTable->removeRow(iRow);
2585 }
2586 }
2587 nRows = _cmbTable->rowCount();
2588 if (nRows < 1) {
2589 enableWidget(false, _cmbMethodComboBox);
2590 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2591 _cmbMaxresLineEdit->setEnabled(false);
2592 _cmbSamplSpinBox->setEnabled(false);
2593 }
2594}
2595
2596//
2597////////////////////////////////////////////////////////////////////////////
2598void bncWindow::populateCmbTable() {
2599
2600 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2601 _cmbTable->removeRow(iRow);
2602 }
2603
2604 bncSettings settings;
2605
2606 int iRow = -1;
2607 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2608 while (it.hasNext()) {
2609 QStringList hlp = it.next().split(" ");
2610 if (hlp.size() > 2) {
2611 ++iRow;
2612 _cmbTable->insertRow(iRow);
2613 }
2614 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2615 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2616 }
2617 }
2618}
2619
2620//
2621////////////////////////////////////////////////////////////////////////////
2622void bncWindow::slotAddUploadRow() {
2623 int iRow = _uploadTable->rowCount();
2624 _uploadTable->insertRow(iRow);
2625 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2626 if (iCol == 3) {
2627 QLineEdit* passwd = new QLineEdit();
2628 passwd->setFrame(false);
2629 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2630 _uploadTable->setCellWidget(iRow, iCol, passwd);
2631 }
2632 else if (iCol == 4) {
2633 QComboBox* system = new QComboBox();
2634 system->setEditable(false);
2635 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2636 system->setFrame(false);
2637 _uploadTable->setCellWidget(iRow, iCol, system);
2638 }
2639 else if (iCol == 5) {
2640 QCheckBox* com = new QCheckBox();
2641 _uploadTable->setCellWidget(iRow, iCol, com);
2642 }
2643 else if (iCol == 11) {
2644 bncTableItem* bncIt = new bncTableItem();
2645 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2646 _uploadTable->setItem(iRow, iCol, bncIt);
2647 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2648 }
2649 else {
2650 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2651 }
2652 }
2653}
2654
2655//
2656////////////////////////////////////////////////////////////////////////////
2657void bncWindow::slotDelUploadRow() {
2658 BNC_CORE->_uploadTableItems.clear();
2659 int nRows = _uploadTable->rowCount();
2660 bool flg[nRows];
2661 for (int iRow = 0; iRow < nRows; iRow++) {
2662 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2663 flg[iRow] = true;
2664 }
2665 else {
2666 flg[iRow] = false;
2667 }
2668 }
2669 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2670 if (flg[iRow]) {
2671 _uploadTable->removeRow(iRow);
2672 }
2673 }
2674 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2675 BNC_CORE->_uploadTableItems[iRow] =
2676 (bncTableItem*) _uploadTable->item(iRow, 11);
2677 }
2678 nRows = _uploadTable->rowCount();
2679 if (nRows < 1) {
2680 enableWidget(false, _uploadIntrComboBox);
2681 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2682 enableWidget(false, _uploadSamplSp3SpinBox);
2683 enableWidget(false, _uploadSamplClkRnxSpinBox);
2684 }
2685}
2686
2687//
2688////////////////////////////////////////////////////////////////////////////
2689void bncWindow::populateUploadTable() {
2690 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2691 _uploadTable->removeRow(iRow);
2692 }
2693
2694 bncSettings settings;
2695
2696 int iRow = -1;
2697 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2698 while (it.hasNext()) {
2699 QStringList hlp = it.next().split(",");
2700 if (hlp.size() > 6) {
2701 ++iRow;
2702 _uploadTable->insertRow(iRow);
2703 }
2704 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2705 if (iCol == 3) {
2706 QLineEdit* passwd = new QLineEdit();
2707 passwd->setFrame(false);
2708 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2709 passwd->setText(hlp[iCol]);
2710 _uploadTable->setCellWidget(iRow, iCol, passwd);
2711 }
2712 else if (iCol == 4) {
2713 QComboBox* system = new QComboBox();
2714 system->setEditable(false);
2715 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2716 system->setFrame(false);
2717 system->setCurrentIndex(system->findText(hlp[iCol]));
2718 _uploadTable->setCellWidget(iRow, iCol, system);
2719 }
2720 else if (iCol == 5) {
2721 QCheckBox* com = new QCheckBox();
2722 if (hlp[iCol].toInt() == Qt::Checked) {
2723 com->setCheckState(Qt::Checked);
2724 }
2725 _uploadTable->setCellWidget(iRow, iCol, com);
2726 }
2727 else if (iCol == 11) {
2728 bncTableItem* bncIt = new bncTableItem();
2729 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2730 _uploadTable->setItem(iRow, iCol, bncIt);
2731 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2732 }
2733 else {
2734 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2735 }
2736 }
2737 }
2738}
2739
2740//
2741////////////////////////////////////////////////////////////////////////////
2742void bncWindow::slotSetUploadTrafo() {
2743 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2744 dlg->exec();
2745 delete dlg;
2746}
2747
2748// Start Post-Processing PPP
2749////////////////////////////////////////////////////////////////////////////
2750void bncWindow::startPostProcessingPPP() {
2751#ifdef USE_POSTPROCESSING
2752 _runningPostProcessingPPP = true;
2753 _actStart->setText("0 Epochs");
2754 enableStartStop();
2755
2756 _postProcessing = new t_postProcessing(this);
2757 connect(_postProcessing, SIGNAL(finished()), this, SLOT(slotFinishedPostProcessingPPP()));
2758 connect(_postProcessing, SIGNAL(progress(int)), this, SLOT(slotPostProgress(int)));
2759 bncSettings settings;
2760 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2761 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2762 _bncFigurePPP, SLOT(slotNewPosition(bncTime, double, double, double)));
2763 }
2764#ifdef QT_WEBKIT
2765 if (_mapWin) {
2766 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2767 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2768 }
2769#endif
2770
2771 _postProcessing->start();
2772#else
2773 QMessageBox::information(this, "Information",
2774 "Post-Processing Not Permitted");
2775#endif
2776}
2777
2778// Post-Processing PPP Finished
2779////////////////////////////////////////////////////////////////////////////
2780void bncWindow::slotFinishedPostProcessingPPP() {
2781 _runningPostProcessingPPP = false;
2782 _postProcessing = 0;
2783 QMessageBox::information(this, "Information",
2784 "Post-Processing Thread Finished");
2785 _actStart->setText("Start");
2786 enableStartStop();
2787}
2788
2789// Progress Bar Change
2790////////////////////////////////////////////////////////////////////////////
2791void bncWindow::slotPostProgress(int nEpo) {
2792 if (_actStart) {
2793 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2794 }
2795}
2796
2797// Start Post-Processing Reqc
2798////////////////////////////////////////////////////////////////////////////
2799void bncWindow::startPostProcessingReqc() {
2800#ifdef USE_POSTPROCESSING
2801 _runningPostProcessingReqc = true;
2802 enableStartStop();
2803 if (_reqcActionComboBox->currentText() == "Analyze") {
2804 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2805 connect(reqcAnalyze, SIGNAL(finished()),
2806 this, SLOT(slotFinishedPostProcessingReqc()));
2807 reqcAnalyze->start();
2808 }
2809 else {
2810 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2811 connect(reqcEdit, SIGNAL(finished()),
2812 this, SLOT(slotFinishedPostProcessingReqc()));
2813 reqcEdit->start();
2814 }
2815#else
2816 QMessageBox::information(this, "Information",
2817 "Post-Processing Not Permitted");
2818#endif
2819}
2820
2821// Post-Processing Reqc Finished
2822////////////////////////////////////////////////////////////////////////////
2823void bncWindow::slotFinishedPostProcessingReqc() {
2824 _runningPostProcessingReqc = false;
2825 if (_reqcActionComboBox->currentText() != "Analyze") {
2826 QMessageBox::information(this, "Information",
2827 "RINEX Processing Thread Finished");
2828 }
2829 enableStartStop();
2830}
2831
2832// Edit teqc-like editing options
2833////////////////////////////////////////////////////////////////////////////
2834void bncWindow::slotReqcEditOption() {
2835 reqcDlg* dlg = new reqcDlg(this);
2836 dlg->move(this->pos().x()+50, this->pos().y()+50);
2837 dlg->exec();
2838 delete dlg;
2839}
2840
2841// Enable/Disable Start and Stop Buttons
2842////////////////////////////////////////////////////////////////////////////
2843void bncWindow::enableStartStop() {
2844
2845 if ( _pppSPPComboBox && _pppSPPComboBox->currentText() == "Post-Processing" ) {
2846 if (_runningPostProcessingPPP) {
2847 _actStart->setEnabled(false);
2848 }
2849 else {
2850 _actStart->setEnabled(true);
2851 }
2852 _actStop->setEnabled(false);
2853 }
2854 else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
2855 if (_runningPostProcessingReqc) {
2856 _actStart->setEnabled(false);
2857 }
2858 else {
2859 _actStart->setEnabled(true);
2860 }
2861 _actStop->setEnabled(false);
2862 }
2863 else {
2864 if (_runningRealTime) {
2865 _actStart->setEnabled(false);
2866 _actStop->setEnabled(true);
2867 }
2868 else {
2869 _actStop->setEnabled(false);
2870 if (_mountPointsTable->rowCount() == 0) {
2871 _actStart->setEnabled(false);
2872 }
2873 else {
2874 _actStart->setEnabled(true);
2875 }
2876 }
2877 }
2878}
2879
2880// Show Map
2881////////////////////////////////////////////////////////////////////////////
2882void bncWindow::slotMapMountPoints() {
2883 saveOptions();
2884 t_bncMap* bncMap = new t_bncMap(this);
2885 bncMap->setMinimumSize(800, 600);
2886 bncMap->setWindowTitle("Selected Mountpoints");
2887
2888 bncSettings settings;
2889 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2890 while (it.hasNext()) {
2891 QStringList hlp = it.next().split(" ");
2892 if (hlp.size() < 5) continue;
2893 QUrl url(hlp[0]);
2894 double latDeg = hlp[2].toDouble();
2895 double lonDeg = hlp[3].toDouble();
2896 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2897 }
2898
2899 bncMap->show();
2900}
2901
2902// Show Map
2903////////////////////////////////////////////////////////////////////////////
2904void bncWindow::slotMapPPP() {
2905#ifdef QT_WEBKIT
2906 if (!_mapWin) {
2907 _mapWin = new bncMapWin(this);
2908 QListIterator<bncGetThread*> it(_threads);
2909 while (it.hasNext()) {
2910 bncGetThread* thread = it.next();
2911 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2912 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2913 }
2914 if (_postProcessing) {
2915 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2916 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2917 }
2918 }
2919 _mapWin->show();
2920#else
2921 QMessageBox::information(this, "Information",
2922 "Qt Library compiled without QtWebKit");
2923#endif
2924}
Note: See TracBrowser for help on using the repository browser.