source: ntrip/trunk/BNC/src/bncwindow.cpp@ 4537

Last change on this file since 4537 was 4537, checked in by weber, 10 years ago

5min intervall for 'reread configuration' added

File size: 137.6 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bncapp.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#ifdef USE_POSTPROCESSING
66# include "rinex/bncpostprocess.h"
67# include "rinex/reqcedit.h"
68# include "rinex/reqcanalyze.h"
69#endif
70
71using namespace std;
72
73// Constructor
74////////////////////////////////////////////////////////////////////////////
75bncWindow::bncWindow() {
76
77 _caster = 0;
78 _casterEph = 0;
79
80 _bncFigure = new bncFigure(this);
81 _bncFigureLate = new bncFigureLate(this);
82 _bncFigurePPP = new bncFigurePPP(this);
83 _runningRealTime = false;
84 _runningPostProcessingPPP = false;
85 _runningPostProcessingReqc = false;
86
87 _pppSPPComboBox = 0; // necessary for enableStartStop()
88 _reqcActionComboBox = 0; // necessary for enableStartStop()
89
90 int ww = QFontMetrics(this->font()).width('w');
91
92 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
93
94 setMinimumSize(85*ww, 65*ww);
95
96 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
97
98 connect((bncApp*)qApp, SIGNAL(newMessage(QByteArray,bool)),
99 this, SLOT(slotWindowMessage(QByteArray,bool)));
100
101 // Create Actions
102 // --------------
103 _actHelp = new QAction(tr("&Help Contents"),this);
104 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
105
106 _actAbout = new QAction(tr("&About BNC"),this);
107 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
108
109 _actFlowchart = new QAction(tr("&Flow Chart"),this);
110 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
111
112 _actFontSel = new QAction(tr("Select &Font"),this);
113 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
114
115 _actSaveOpt = new QAction(tr("&Save && Reread Configuration"),this);
116 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
117
118 _actQuit = new QAction(tr("&Quit"),this);
119 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
120
121 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
122 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
123
124 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
125 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
126 _actDeleteMountPoints->setEnabled(false);
127
128 _actStart = new QAction(tr("Sta&rt"),this);
129 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
130
131 _actStop = new QAction(tr("Sto&p"),this);
132 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
133
134 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
135 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
136
137 CreateMenu();
138 AddToolbar();
139
140 bncSettings settings;
141
142 // Network Options
143 // ---------------
144 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
145 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
146
147 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
148 this, SLOT(slotBncTextChanged()));
149
150 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
151 _ignoreSslErrorsCheckBox = new QCheckBox();
152 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
153 settings.value("ignoreSslErrors").toInt()));
154
155 // General Options
156 // ---------------
157 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
158 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
159 _rnxAppendCheckBox = new QCheckBox();
160 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
161 settings.value("rnxAppend").toInt()));
162 _onTheFlyComboBox = new QComboBox();
163 _onTheFlyComboBox->setEditable(false);
164 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
165 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
166 if (ii != -1) {
167 _onTheFlyComboBox->setCurrentIndex(ii);
168 }
169 _autoStartCheckBox = new QCheckBox();
170 _autoStartCheckBox->setCheckState(Qt::CheckState(
171 settings.value("autoStart").toInt()));
172
173 // RINEX Observations Options
174 // --------------------------
175 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
176 _rnxIntrComboBox = new QComboBox();
177 _rnxIntrComboBox->setEditable(false);
178 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
179 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
180 if (ii != -1) {
181 _rnxIntrComboBox->setCurrentIndex(ii);
182 }
183 _rnxSamplSpinBox = new QSpinBox();
184 _rnxSamplSpinBox->setMinimum(0);
185 _rnxSamplSpinBox->setMaximum(60);
186 _rnxSamplSpinBox->setSingleStep(5);
187 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
188 _rnxSamplSpinBox->setSuffix(" sec");
189 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
190 _rnxSkelLineEdit->setMaximumWidth(5*ww);
191 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
192 _rnxV3CheckBox = new QCheckBox();
193 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
194
195 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
196 this, SLOT(slotBncTextChanged()));
197
198 // RINEX Ephemeris Options
199 // -----------------------
200 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
201 _ephIntrComboBox = new QComboBox();
202 _ephIntrComboBox->setEditable(false);
203 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
205 if (jj != -1) {
206 _ephIntrComboBox->setCurrentIndex(jj);
207 }
208 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
209 _ephV3CheckBox = new QCheckBox();
210 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
211
212 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
213 this, SLOT(slotBncTextChanged()));
214
215 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
216 this, SLOT(slotBncTextChanged()));
217
218 // Broadcast Corrections Options
219 // -----------------------------
220 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
221 _corrIntrComboBox = new QComboBox();
222 _corrIntrComboBox->setEditable(false);
223 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
224 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
225 if (mm != -1) {
226 _corrIntrComboBox->setCurrentIndex(mm);
227 }
228 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
229 _corrTimeSpinBox = new QSpinBox();
230 _corrTimeSpinBox->setMinimum(0);
231 _corrTimeSpinBox->setMaximum(60);
232 _corrTimeSpinBox->setSingleStep(1);
233 _corrTimeSpinBox->setSuffix(" sec");
234 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
235
236 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
237 this, SLOT(slotBncTextChanged()));
238
239 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
240 this, SLOT(slotBncTextChanged()));
241
242 // Feed Engine Options
243 // -------------------
244 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
245 _waitTimeSpinBox = new QSpinBox();
246 _waitTimeSpinBox->setMinimum(1);
247 _waitTimeSpinBox->setMaximum(30);
248 _waitTimeSpinBox->setSingleStep(1);
249 _waitTimeSpinBox->setSuffix(" sec");
250 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
251 _binSamplSpinBox = new QSpinBox();
252 _binSamplSpinBox->setMinimum(0);
253 _binSamplSpinBox->setMaximum(60);
254 _binSamplSpinBox->setSingleStep(5);
255 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
256 _binSamplSpinBox->setSuffix(" sec");
257 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
258 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
259
260 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
261 this, SLOT(slotBncTextChanged()));
262
263 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
264 this, SLOT(slotBncTextChanged()));
265
266 // Serial Output Options
267 // ---------------------
268 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
269 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
270 _serialBaudRateComboBox = new QComboBox();
271 _serialBaudRateComboBox->addItems(QString("110,300,600,"
272 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
273 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
274 if (kk != -1) {
275 _serialBaudRateComboBox->setCurrentIndex(kk);
276 }
277 _serialFlowControlComboBox = new QComboBox();
278 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
279 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
280 if (kk != -1) {
281 _serialFlowControlComboBox->setCurrentIndex(kk);
282 }
283 _serialDataBitsComboBox = new QComboBox();
284 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
285 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
286 if (kk != -1) {
287 _serialDataBitsComboBox->setCurrentIndex(kk);
288 }
289 _serialParityComboBox = new QComboBox();
290 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
291 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
292 if (kk != -1) {
293 _serialParityComboBox->setCurrentIndex(kk);
294 }
295 _serialStopBitsComboBox = new QComboBox();
296 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
297 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
298 if (kk != -1) {
299 _serialStopBitsComboBox->setCurrentIndex(kk);
300 }
301 _serialAutoNMEAComboBox = new QComboBox();
302 _serialAutoNMEAComboBox->addItems(QString("Auto,Manual").split(","));
303 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
304 if (kk != -1) {
305 _serialAutoNMEAComboBox->setCurrentIndex(kk);
306 }
307 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
308 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
309
310 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
311 this, SLOT(slotBncTextChanged()));
312
313 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
314 this, SLOT(slotBncTextChanged()));
315
316 // Outages Options
317 // ---------------
318 _obsRateComboBox = new QComboBox();
319 _obsRateComboBox->setEditable(false);
320 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
321 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
322 if (kk != -1) {
323 _obsRateComboBox->setCurrentIndex(kk);
324 }
325 _adviseFailSpinBox = new QSpinBox();
326 _adviseFailSpinBox->setMinimum(0);
327 _adviseFailSpinBox->setMaximum(60);
328 _adviseFailSpinBox->setSingleStep(1);
329 _adviseFailSpinBox->setSuffix(" min");
330 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
331 _adviseRecoSpinBox = new QSpinBox();
332 _adviseRecoSpinBox->setMinimum(0);
333 _adviseRecoSpinBox->setMaximum(60);
334 _adviseRecoSpinBox->setSingleStep(1);
335 _adviseRecoSpinBox->setSuffix(" min");
336 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
337 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
338
339 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
340 this, SLOT(slotBncTextChanged()));
341
342 // Miscellaneous Options
343 // ---------------------
344 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
345 _perfIntrComboBox = new QComboBox();
346 _perfIntrComboBox->setEditable(false);
347 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
348 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
349 if (ll != -1) {
350 _perfIntrComboBox->setCurrentIndex(ll);
351 }
352 _scanRTCMCheckBox = new QCheckBox();
353 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
354 settings.value("scanRTCM").toInt()));
355
356 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
357 this, SLOT(slotBncTextChanged()));
358
359 // PPP Options
360 // -----------
361 _pppMountLineEdit = new QLineEdit(settings.value("pppMount").toString());
362 _pppMountLineEdit->setMaximumWidth(8*ww);
363 _pppCorrMountLineEdit = new QLineEdit(settings.value("pppCorrMount").toString());
364 _pppMountLineEdit->setMinimumWidth(8*ww);
365 _pppCorrMountLineEdit->setMinimumWidth(8*ww);
366 _pppCorrMountLineEdit->setMaximumWidth(8*ww);
367 _pppNMEALineEdit = new QLineEdit(settings.value("nmeaFile").toString());
368 _pppNMEALineEdit->setMinimumWidth(15*ww);
369 _pppNMEAPortLineEdit = new QLineEdit(settings.value("nmeaPort").toString());
370 _pppNMEAPortLineEdit->setMaximumWidth(8*ww);
371 _pppNMEAPortLineEdit->setMinimumWidth(8*ww);
372 _pppSigCLineEdit = new QLineEdit(settings.value("pppSigmaCode").toString());
373 _pppSigPLineEdit = new QLineEdit(settings.value("pppSigmaPhase").toString());
374 _pppSigCrd0 = new QLineEdit(settings.value("pppSigCrd0").toString());
375 _pppSigCrdP = new QLineEdit(settings.value("pppSigCrdP").toString());
376 _pppSigTrp0 = new QLineEdit(settings.value("pppSigTrp0").toString());
377 _pppSigTrpP = new QLineEdit(settings.value("pppSigTrpP").toString());
378 _pppAverageLineEdit = new QLineEdit(settings.value("pppAverage").toString());
379 _pppQuickStartLineEdit = new QLineEdit(settings.value("pppQuickStart").toString());
380 _pppMaxSolGapLineEdit = new QLineEdit(settings.value("pppMaxSolGap").toString());
381 _pppRefCrdXLineEdit = new QLineEdit(settings.value("pppRefCrdX").toString());
382 _pppRefCrdYLineEdit = new QLineEdit(settings.value("pppRefCrdY").toString());
383 _pppRefCrdZLineEdit = new QLineEdit(settings.value("pppRefCrdZ").toString());
384 _pppRefdNLineEdit = new QLineEdit(settings.value("pppRefdN").toString());
385 _pppRefdELineEdit = new QLineEdit(settings.value("pppRefdE").toString());
386 _pppRefdULineEdit = new QLineEdit(settings.value("pppRefdU").toString());
387 _pppSync = new QLineEdit(settings.value("pppSync").toString());
388 _pppAntexFileChooser = new qtFileChooser;
389 _pppAntexFileChooser->setMinimumWidth(12*ww);
390 _pppAntennaLineEdit = new QLineEdit(settings.value("pppAntenna").toString());
391 _pppAntexFileChooser->setFileName(settings.value("pppAntex").toString());
392
393 _pppSPPComboBox = new QComboBox();
394 _pppSPPComboBox->setEditable(false);
395 _pppSPPComboBox->addItems(QString(",Realtime-PPP,Realtime-SPP,Post-Processing").split(","));
396 int ik = _pppSPPComboBox->findText(settings.value("pppSPP").toString());
397 if (ik != -1) {
398 _pppSPPComboBox->setCurrentIndex(ik);
399 }
400 _pppUsePhaseCheckBox = new QCheckBox();
401 _pppUsePhaseCheckBox->setCheckState(Qt::CheckState(
402 settings.value("pppUsePhase").toInt()));
403 _pppEstTropoCheckBox = new QCheckBox();
404 _pppEstTropoCheckBox->setCheckState(Qt::CheckState(
405 settings.value("pppEstTropo").toInt()));
406 _pppGLONASSCheckBox = new QCheckBox();
407 _pppGLONASSCheckBox->setCheckState(Qt::CheckState(
408 settings.value("pppGLONASS").toInt()));
409 _pppGalileoCheckBox = new QCheckBox();
410 _pppGalileoCheckBox->setCheckState(Qt::CheckState(
411 settings.value("pppGalileo").toInt()));
412
413 _pppPlotCoordinates = new QCheckBox();
414 _pppPlotCoordinates->setCheckState(Qt::CheckState(
415 settings.value("pppPlotCoordinates").toInt()));
416
417 connect(_pppMountLineEdit, SIGNAL(textChanged(const QString &)),
418 this, SLOT(slotBncTextChanged()));
419
420 connect(_pppCorrMountLineEdit, SIGNAL(textChanged(const QString &)),
421 this, SLOT(slotBncTextChanged()));
422
423 connect(_pppUsePhaseCheckBox, SIGNAL(stateChanged(int)),
424 this, SLOT(slotBncTextChanged()));
425
426 connect(_pppRefCrdXLineEdit, SIGNAL(textChanged(const QString &)),
427 this, SLOT(slotBncTextChanged()));
428 connect(_pppRefCrdYLineEdit, SIGNAL(textChanged(const QString &)),
429 this, SLOT(slotBncTextChanged()));
430 connect(_pppRefCrdZLineEdit, SIGNAL(textChanged(const QString &)),
431 this, SLOT(slotBncTextChanged()));
432 connect(_pppRefdNLineEdit, SIGNAL(textChanged(const QString &)),
433 this, SLOT(slotBncTextChanged()));
434 connect(_pppRefdELineEdit, SIGNAL(textChanged(const QString &)),
435 this, SLOT(slotBncTextChanged()));
436 connect(_pppRefdULineEdit, SIGNAL(textChanged(const QString &)),
437 this, SLOT(slotBncTextChanged()));
438
439 connect(_pppEstTropoCheckBox, SIGNAL(stateChanged(int)),
440 this, SLOT(slotBncTextChanged()));
441
442 connect(_pppSync, SIGNAL(textChanged(const QString &)),
443 this, SLOT(slotBncTextChanged()));
444
445 connect(_pppSPPComboBox, SIGNAL(currentIndexChanged(const QString &)),
446 this, SLOT(slotBncTextChanged()));
447
448 connect(_pppAntexFileChooser, SIGNAL(fileNameChanged(const QString &)),
449 this, SLOT(slotBncTextChanged()));
450
451 connect(_pppQuickStartLineEdit, SIGNAL(textChanged(const QString &)),
452 this, SLOT(slotBncTextChanged()));
453
454 // Streams
455 // -------
456 _mountPointsTable = new QTableWidget(0,8);
457
458 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
459 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
460 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
461 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
462 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
463 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
464 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
465 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
466 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
467_mountPointsTable->setHorizontalHeaderLabels(labels);
468 _mountPointsTable->setGridStyle(Qt::NoPen);
469 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
470 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
471 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
472 _mountPointsTable->hideColumn(0);
473 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
474 SLOT(slotSelectionChanged()));
475 populateMountPointsTable();
476
477 _log = new QTextBrowser();
478 _log->setReadOnly(true);
479
480 // Combine Corrections
481 // -------------------
482 _cmbTable = new QTableWidget(0,3);
483 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
484 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
485 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
486 _cmbTable->setMaximumWidth(30*ww);
487 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
488 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
489 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
490 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
491 _cmbTable->horizontalHeader()->setStretchLastSection(true);
492 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
493
494 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
495
496 _cmbSamplSpinBox = new QSpinBox;
497 _cmbSamplSpinBox->setMinimum(10);
498 _cmbSamplSpinBox->setMaximum(60);
499 _cmbSamplSpinBox->setSingleStep(10);
500 _cmbSamplSpinBox->setMaximumWidth(9*ww);
501 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
502 _cmbSamplSpinBox->setSuffix(" sec");
503
504 QPushButton* addCmbRowButton = new QPushButton("Add Row");
505 QPushButton* delCmbRowButton = new QPushButton("Delete");
506
507 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
508 SLOT(slotBncTextChanged()));
509
510 _cmbMethodComboBox = new QComboBox();
511 _cmbMethodComboBox->setEditable(false);
512 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
513 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
514 if (im != -1) {
515 _cmbMethodComboBox->setCurrentIndex(im);
516 }
517
518 int iRow = _cmbTable->rowCount();
519 if (iRow > 0) {
520 enableWidget(true, _cmbMethodComboBox);
521 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
522 _cmbMaxresLineEdit->setEnabled(true);
523 _cmbSamplSpinBox->setEnabled(true);
524 }
525 else {
526 enableWidget(false, _cmbMethodComboBox);
527 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
528 _cmbMaxresLineEdit->setEnabled(false);
529 _cmbSamplSpinBox->setEnabled(false);
530 }
531
532 // Upload Results
533 // -------------
534 _uploadTable = new QTableWidget(0,12);
535 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
536 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
537 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
538 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
539 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
540 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
541 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
542 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
543 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
544 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
545 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
546 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
547 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
548 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
549 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
550 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
551 _uploadTable->horizontalHeader()->setStretchLastSection(true);
552 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
553
554 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
555 SLOT(slotBncTextChanged()));
556
557 QPushButton* addUploadRowButton = new QPushButton("Add Row");
558 QPushButton* delUploadRowButton = new QPushButton("Del Row");
559 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
560 _uploadIntrComboBox = new QComboBox;
561 _uploadIntrComboBox->setEditable(false);
562 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
563 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
564 if (ii != -1) {
565 _uploadIntrComboBox->setCurrentIndex(ii);
566 }
567
568 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
569 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
570 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
571 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
572 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
573 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
574 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
575
576 _uploadSamplSp3SpinBox = new QSpinBox;
577 _uploadSamplSp3SpinBox->setMinimum(0);
578 _uploadSamplSp3SpinBox->setMaximum(15);
579 _uploadSamplSp3SpinBox->setSingleStep(1);
580 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
581 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
582 _uploadSamplSp3SpinBox->setSuffix(" min");
583
584 _uploadSamplClkRnxSpinBox = new QSpinBox;
585 _uploadSamplClkRnxSpinBox->setMinimum(0);
586 _uploadSamplClkRnxSpinBox->setMaximum(60);
587 _uploadSamplClkRnxSpinBox->setSingleStep(5);
588 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
589 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
590 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
591
592 int iRowT = _uploadTable->rowCount();
593 if (iRowT > 0) {
594 enableWidget(true, _uploadIntrComboBox);
595 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
596 enableWidget(true, _uploadSamplSp3SpinBox);
597 enableWidget(true, _uploadSamplClkRnxSpinBox);
598 }
599 else {
600 enableWidget(false, _uploadIntrComboBox);
601 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
602 enableWidget(false, _uploadSamplSp3SpinBox);
603 enableWidget(false, _uploadSamplClkRnxSpinBox);
604 }
605
606 // Upload RTCM3 Ephemeris
607 // ----------------------
608 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
609 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
610 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
611 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
612 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
613 _uploadEphSampleSpinBox = new QSpinBox;
614 _uploadEphSampleSpinBox->setMinimum(5);
615 _uploadEphSampleSpinBox->setMaximum(60);
616 _uploadEphSampleSpinBox->setSingleStep(5);
617 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
618 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
619 _uploadEphSampleSpinBox->setSuffix(" sec");
620 _uploadEphBytesCounter = new bncBytesCounter;
621
622 // Canvas with Editable Fields
623 // ---------------------------
624 _canvas = new QWidget;
625 setCentralWidget(_canvas);
626
627 _aogroup = new QTabWidget();
628 QWidget* pgroup = new QWidget();
629 QWidget* ggroup = new QWidget();
630 QWidget* sgroup = new QWidget();
631 QWidget* egroup = new QWidget();
632 QWidget* agroup = new QWidget();
633 QWidget* cgroup = new QWidget();
634 QWidget* ogroup = new QWidget();
635 QWidget* rgroup = new QWidget();
636 QWidget* sergroup = new QWidget();
637 QWidget* pppgroup = new QWidget();
638 QWidget* ppp2group = new QWidget();
639 QWidget* reqcgroup = new QWidget();
640 QWidget* cmbgroup = new QWidget();
641 QWidget* uploadgroup = new QWidget();
642 QWidget* uploadEphgroup = new QWidget();
643 _aogroup->addTab(pgroup,tr("Network"));
644 _aogroup->addTab(ggroup,tr("General"));
645 _aogroup->addTab(ogroup,tr("RINEX Observations"));
646 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
647 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
648 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
649 _aogroup->addTab(sgroup,tr("Feed Engine"));
650 _aogroup->addTab(sergroup,tr("Serial Output"));
651 _aogroup->addTab(agroup,tr("Outages"));
652 _aogroup->addTab(rgroup,tr("Miscellaneous"));
653 _aogroup->addTab(pppgroup,tr("PPP (1)"));
654 _aogroup->addTab(ppp2group,tr("PPP (2)"));
655#ifdef USE_COMBINATION
656 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
657#endif
658 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
659 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
660
661 // Log Tab
662 // -------
663 _loggroup = new QTabWidget();
664 _loggroup->addTab(_log,tr("Log"));
665 _loggroup->addTab(_bncFigure,tr("Throughput"));
666 _loggroup->addTab(_bncFigureLate,tr("Latency"));
667 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
668
669 // Netowork (Proxy and SSL) Tab
670 // ----------------------------
671 QGridLayout* pLayout = new QGridLayout;
672 pLayout->setColumnMinimumWidth(0,13*ww);
673 _proxyPortLineEdit->setMaximumWidth(9*ww);
674
675 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none."),0, 0, 1, 50);
676 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
677 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
678 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
679 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
680 pLayout->addWidget(new QLabel("Path to SSL Certificates"), 3, 0);
681 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
682 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
683 pLayout->addWidget(new QLabel("Ignore SSL Authorization Errors"), 4, 0);
684 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
685 pLayout->addWidget(new QLabel(" "), 4, 0);
686 pLayout->addWidget(new QLabel(" "), 5, 0);
687 pLayout->addWidget(new QLabel(" "), 6, 0);
688 pgroup->setLayout(pLayout);
689
690 // General Tab
691 // -----------
692 QGridLayout* gLayout = new QGridLayout;
693 gLayout->setColumnMinimumWidth(0,14*ww);
694 _onTheFlyComboBox->setMaximumWidth(9*ww);
695
696 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),0, 0, 1, 50);
697 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
698 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,30);
699 gLayout->addWidget(new QLabel("Append files"), 2, 0);
700 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
701 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
702 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
703 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
704 gLayout->addWidget(_autoStartCheckBox, 4, 1);
705 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
706 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,30);
707 gLayout->addWidget(new QLabel(" "), 6, 0);
708 ggroup->setLayout(gLayout);
709
710 // RINEX Observations
711 // ------------------
712 QGridLayout* oLayout = new QGridLayout;
713 oLayout->setColumnMinimumWidth(0,14*ww);
714 _rnxIntrComboBox->setMaximumWidth(9*ww);
715 _rnxSamplSpinBox->setMaximumWidth(9*ww);
716
717 oLayout->addWidget(new QLabel("Saving RINEX observation files."),0, 0, 1,50);
718 oLayout->addWidget(new QLabel("Directory"), 1, 0);
719 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1,24);
720 oLayout->addWidget(new QLabel("Interval"), 2, 0);
721 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
722 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
723 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
724 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
725 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, 1, 1, Qt::AlignLeft);
726 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
727 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1,24);
728 oLayout->addWidget(new QLabel("Version 3"), 5, 0);
729 oLayout->addWidget(_rnxV3CheckBox, 5, 1);
730 oLayout->addWidget(new QLabel(" "), 6, 0);
731 ogroup->setLayout(oLayout);
732
733 // RINEX Ephemeris
734 // ---------------
735 QGridLayout* eLayout = new QGridLayout;
736 eLayout->setColumnMinimumWidth(0,14*ww);
737 _ephIntrComboBox->setMaximumWidth(9*ww);
738 _outEphPortLineEdit->setMaximumWidth(9*ww);
739
740 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),0,0,1,50);
741 eLayout->addWidget(new QLabel("Directory"), 1, 0);
742 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
743 eLayout->addWidget(new QLabel("Interval"), 2, 0);
744 eLayout->addWidget(_ephIntrComboBox, 2, 1);
745 eLayout->addWidget(new QLabel("Port"), 3, 0);
746 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
747 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
748 eLayout->addWidget(_ephV3CheckBox, 4, 1);
749 eLayout->addWidget(new QLabel(" "), 5, 0);
750 eLayout->addWidget(new QLabel(" "), 6, 0);
751 egroup->setLayout(eLayout);
752
753
754 // Broadcast Corrections
755 // ---------------------
756 QGridLayout* cLayout = new QGridLayout;
757 cLayout->setColumnMinimumWidth(0,14*ww);
758 _corrIntrComboBox->setMaximumWidth(9*ww);
759 _corrPortLineEdit->setMaximumWidth(9*ww);
760 _corrTimeSpinBox->setMaximumWidth(9*ww);
761
762 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),0,0,1,50);
763 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
764 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,20);
765 cLayout->addWidget(new QLabel("Interval"), 2, 0);
766 cLayout->addWidget(_corrIntrComboBox, 2, 1);
767 cLayout->addWidget(new QLabel("Port"), 3, 0);
768 cLayout->addWidget(_corrPortLineEdit, 3, 1);
769 cLayout->addWidget(new QLabel(" Wait for full corr epoch"), 3, 2, Qt::AlignRight);
770 cLayout->addWidget(_corrTimeSpinBox, 3, 3, Qt::AlignLeft);
771 cLayout->addWidget(new QLabel(" "), 4, 0);
772 cLayout->addWidget(new QLabel(" "), 5, 0);
773 cLayout->addWidget(new QLabel(" "), 6, 0);
774 cgroup->setLayout(cLayout);
775
776 // Feed Engine
777 // -----------
778 QGridLayout* sLayout = new QGridLayout;
779 sLayout->setColumnMinimumWidth(0,14*ww);
780 _outPortLineEdit->setMaximumWidth(9*ww);
781 _waitTimeSpinBox->setMaximumWidth(9*ww);
782 _binSamplSpinBox->setMaximumWidth(9*ww);
783 _outUPortLineEdit->setMaximumWidth(9*ww);
784
785 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine."),0,0,1,50);
786 sLayout->addWidget(new QLabel("Port"), 1, 0);
787 sLayout->addWidget(_outPortLineEdit, 1, 1);
788 sLayout->addWidget(new QLabel("Wait for full obs epoch"), 1, 2, Qt::AlignRight);
789 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
790 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
791 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
792 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
793 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 20);
794 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
795 sLayout->addWidget(_outUPortLineEdit, 4, 1);
796 sLayout->addWidget(new QLabel(" "), 5, 0);
797 sLayout->addWidget(new QLabel(" "), 6, 0);
798 sgroup->setLayout(sLayout);
799
800 // Serial Output
801 // -------------
802 QGridLayout* serLayout = new QGridLayout;
803 serLayout->setColumnMinimumWidth(0,14*ww);
804 _serialBaudRateComboBox->setMaximumWidth(9*ww);
805 _serialFlowControlComboBox->setMaximumWidth(11*ww);
806 _serialDataBitsComboBox->setMaximumWidth(5*ww);
807 _serialParityComboBox->setMaximumWidth(9*ww);
808 _serialStopBitsComboBox->setMaximumWidth(5*ww);
809 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
810 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
811
812 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver."),0,0,1,30);
813 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
814 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
815 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
816 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
817 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
818 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
819 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
820 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
821 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
822 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
823 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
824 serLayout->addWidget(_serialParityComboBox, 4, 3);
825 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
826 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
827 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
828 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
829 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
830 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,15);
831 serLayout->addWidget(new QLabel("Height"), 5,20, Qt::AlignRight);
832 serLayout->addWidget(_serialHeightNMEALineEdit, 5,21, 1,11);
833 serLayout->addWidget(new QLabel(" "), 6, 0);
834
835 sergroup->setLayout(serLayout);
836
837 // Outages
838 // -------
839 QGridLayout* aLayout = new QGridLayout;
840 aLayout->setColumnMinimumWidth(0,14*ww);
841 _obsRateComboBox->setMaximumWidth(9*ww);
842 _adviseFailSpinBox->setMaximumWidth(9*ww);
843 _adviseRecoSpinBox->setMaximumWidth(9*ww);
844
845 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes."),0,0,1,50,Qt::AlignLeft);
846 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
847 aLayout->addWidget(_obsRateComboBox, 1, 1);
848 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
849 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
850 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
851 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
852 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
853 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,30);
854 aLayout->addWidget(new QLabel(" "), 5, 0);
855 aLayout->addWidget(new QLabel(" "), 6, 0);
856 agroup->setLayout(aLayout);
857
858 // Miscellaneous
859 // -------------
860 QGridLayout* rLayout = new QGridLayout;
861 rLayout->setColumnMinimumWidth(0,14*ww);
862 _perfIntrComboBox->setMaximumWidth(9*ww);
863
864 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for numbers of message types and antenna information."),0, 0,1,30);
865 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
866 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1,7);
867 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
868 rLayout->addWidget(_perfIntrComboBox, 2, 1);
869 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
870 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
871 rLayout->addWidget(new QLabel(" "), 4, 0);
872 rLayout->addWidget(new QLabel(" "), 5, 0);
873 rLayout->addWidget(new QLabel(" "), 6, 0);
874 rgroup->setLayout(rLayout);
875
876 // PPP Client
877 // ----------
878 QGridLayout* pppLayout = new QGridLayout;
879 pppLayout->setColumnMinimumWidth(0,14*ww);
880 _pppSigCLineEdit->setMaximumWidth(6*ww);
881 _pppSigPLineEdit->setMaximumWidth(6*ww);
882 _pppSigCrd0->setMaximumWidth(6*ww);
883 _pppSigCrdP->setMaximumWidth(6*ww);
884 _pppSigTrp0->setMaximumWidth(6*ww);
885 _pppSigTrpP->setMaximumWidth(6*ww);
886 _pppAverageLineEdit->setMaximumWidth(6*ww);
887 _pppQuickStartLineEdit->setMaximumWidth(6*ww);
888 _pppMaxSolGapLineEdit->setMaximumWidth(6*ww);
889 _pppRefCrdXLineEdit->setMaximumWidth(10*ww);
890 _pppRefCrdYLineEdit->setMaximumWidth(10*ww);
891 _pppRefCrdZLineEdit->setMaximumWidth(10*ww);
892 _pppRefdNLineEdit->setMaximumWidth(6*ww);
893 _pppRefdELineEdit->setMaximumWidth(6*ww);
894 _pppRefdULineEdit->setMaximumWidth(6*ww);
895 _pppSync->setMaximumWidth(6*ww);
896 _pppSPPComboBox->setMinimumWidth(15*ww);
897
898 _postObsFileChooser = new qtFileChooser;
899 _postObsFileChooser->setFileName(settings.value("postObsFile").toString());
900 _postObsFileChooser->setMinimumWidth(15*ww);
901 _postNavFileChooser = new qtFileChooser;
902 _postNavFileChooser->setFileName(settings.value("postNavFile").toString());
903 _postNavFileChooser->setMinimumWidth(15*ww);
904 _postCorrFileChooser = new qtFileChooser;
905 _postCorrFileChooser->setFileName(settings.value("postCorrFile").toString());
906 _postCorrFileChooser->setMinimumWidth(15*ww);
907 _postOutLineEdit = new QLineEdit(settings.value("postOutFile").toString());
908 _postOutLineEdit->setMinimumWidth(15*ww);
909
910 int ir = 0;
911 pppLayout->addWidget(new QLabel("Precise Point Positioning, Panel 1."), ir, 0, 1, 2, Qt::AlignLeft);
912 ++ir;
913 pppLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
914 pppLayout->addWidget(_pppSPPComboBox, ir, 1, Qt::AlignRight);
915 pppLayout->addWidget(_pppMountLineEdit, ir, 3, Qt::AlignRight);
916 pppLayout->addWidget(new QLabel("Obs."), ir, 4, Qt::AlignLeft);
917 pppLayout->addWidget(_pppCorrMountLineEdit, ir, 5, Qt::AlignRight);
918 pppLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
919 ++ir;
920 pppLayout->addWidget(new QLabel("Marker coordinates"), ir, 0, Qt::AlignLeft);
921 pppLayout->addWidget(_pppRefCrdXLineEdit, ir, 1, Qt::AlignRight);
922 pppLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
923 pppLayout->addWidget(_pppRefCrdYLineEdit, ir, 3, Qt::AlignRight);
924 pppLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
925 pppLayout->addWidget(_pppRefCrdZLineEdit, ir, 5, Qt::AlignRight);
926 pppLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
927 ++ir;
928 pppLayout->addWidget(new QLabel("Antenna excentricity"), ir, 0, Qt::AlignLeft);
929 pppLayout->addWidget(_pppRefdNLineEdit, ir, 1, Qt::AlignRight);
930 pppLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
931 pppLayout->addWidget(_pppRefdELineEdit, ir, 3, Qt::AlignRight);
932 pppLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
933 pppLayout->addWidget(_pppRefdULineEdit, ir, 5, Qt::AlignRight);
934 pppLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
935 ++ir;
936 pppLayout->addWidget(new QLabel("NMEA & plot output"),ir, 0, Qt::AlignLeft);
937 pppLayout->addWidget(_pppNMEALineEdit, ir, 1, Qt::AlignRight);
938 pppLayout->addWidget(new QLabel("NMEA File"), ir, 2, Qt::AlignLeft);
939 pppLayout->addWidget(_pppNMEAPortLineEdit, ir, 3, Qt::AlignRight);
940 pppLayout->addWidget(new QLabel("NMEA Port"), ir, 4, Qt::AlignLeft);
941 pppLayout->addWidget(_pppPlotCoordinates, ir, 5, Qt::AlignRight);
942 pppLayout->addWidget(new QLabel("PPP Plot"), ir, 6, Qt::AlignLeft);
943 ++ir;
944 pppLayout->addWidget(new QLabel("Post-processing"), ir, 0, Qt::AlignLeft);
945 pppLayout->addWidget(_postObsFileChooser, ir, 1, Qt::AlignRight);
946 pppLayout->addWidget(new QLabel("Obs "), ir, 2, Qt::AlignLeft);
947 pppLayout->addWidget(_postNavFileChooser, ir, 3, Qt::AlignRight);
948 pppLayout->addWidget(new QLabel("Nav "), ir, 4, Qt::AlignLeft);
949 ++ir;
950 pppLayout->addWidget(_postCorrFileChooser, ir, 1, Qt::AlignRight);
951 pppLayout->addWidget(new QLabel("Corr"), ir, 2, Qt::AlignLeft);
952 pppLayout->addWidget(_postOutLineEdit, ir, 3, Qt::AlignRight);
953 pppLayout->addWidget(new QLabel("Log (full path)"), ir, 4, Qt::AlignLeft);
954
955 pppgroup->setLayout(pppLayout);
956
957 // PPP Client (second panel)
958 // -------------------------
959 QGridLayout* ppp2Layout = new QGridLayout;
960 ppp2Layout->setColumnMinimumWidth(0,14*ww);
961 ir = 0;
962 ppp2Layout->addWidget(new QLabel("Precise Point Positioning, Panel 2."), ir, 0, 1, 10);
963 ++ir;
964 ppp2Layout->addWidget(new QLabel("Antennas"), ir, 0);
965 ppp2Layout->addWidget(_pppAntexFileChooser, ir, 1,1,3);
966 ppp2Layout->addWidget(new QLabel("ANTEX File"), ir, 4);
967 ppp2Layout->addWidget(_pppAntennaLineEdit, ir, 5,1,3);
968 ppp2Layout->addWidget(new QLabel("Antenna Name"), ir, 8);
969 ++ir;
970 ppp2Layout->addWidget(new QLabel("Basics"), ir, 0, 1, 5);
971 ppp2Layout->addWidget(_pppUsePhaseCheckBox, ir, 1, Qt::AlignRight);
972 ppp2Layout->addWidget(new QLabel("Use phase obs"), ir, 2);
973 ppp2Layout->addWidget(_pppEstTropoCheckBox, ir, 3, Qt::AlignRight);
974 ppp2Layout->addWidget(new QLabel("Estimate tropo"), ir, 4);
975 ppp2Layout->addWidget(_pppGLONASSCheckBox, ir, 5, Qt::AlignRight);
976 ppp2Layout->addWidget(new QLabel("Use GLONASS"), ir, 6);
977 ppp2Layout->addWidget(_pppGalileoCheckBox, ir, 7, Qt::AlignRight);
978 ppp2Layout->addWidget(new QLabel("Use Galileo "), ir, 8);
979 ++ir;
980 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
981 ppp2Layout->addWidget(_pppSync, ir, 1);
982 ppp2Layout->addWidget(new QLabel("Sync Corr (sec) "), ir, 2);
983 ppp2Layout->addWidget(_pppAverageLineEdit, ir, 3, Qt::AlignRight);
984 ppp2Layout->addWidget(new QLabel("Averaging (min)") , ir, 4);
985 ppp2Layout->addWidget(_pppQuickStartLineEdit, ir, 5, Qt::AlignRight);
986 ppp2Layout->addWidget(new QLabel("Quick-Start (sec) "), ir, 6);
987 ppp2Layout->addWidget(_pppMaxSolGapLineEdit, ir, 7, Qt::AlignRight);
988 ppp2Layout->addWidget(new QLabel("Max Sol. Gap (sec)"), ir, 8);
989 ++ir;
990 ppp2Layout->addWidget(new QLabel("Sigmas"), ir, 0);
991 ppp2Layout->addWidget(_pppSigCLineEdit, ir, 1, Qt::AlignRight);
992 ppp2Layout->addWidget(new QLabel("Code"), ir, 2);
993 ppp2Layout->addWidget(_pppSigPLineEdit, ir, 3);
994 ppp2Layout->addWidget(new QLabel("Phase"), ir, 4);
995 ++ir;
996 ppp2Layout->addWidget(new QLabel("Sigmas cont'd"), ir, 0);
997 ppp2Layout->addWidget(_pppSigCrd0, ir, 1, Qt::AlignRight);
998 ppp2Layout->addWidget(new QLabel("XYZ Init "), ir, 2);
999 ppp2Layout->addWidget(_pppSigCrdP, ir, 3, Qt::AlignRight);
1000 ppp2Layout->addWidget(new QLabel("XYZ White Noise "), ir, 4);
1001 ppp2Layout->addWidget(_pppSigTrp0, ir, 5, Qt::AlignRight);
1002 ppp2Layout->addWidget(new QLabel("Tropo Init "), ir, 6);
1003 ppp2Layout->addWidget(_pppSigTrpP, ir, 7);
1004 ppp2Layout->addWidget(new QLabel("Tropo White Noise"), ir, 8);
1005 ++ir;
1006 ppp2Layout->addWidget(new QLabel(""), ir, 0);
1007
1008 ppp2group->setLayout(ppp2Layout);
1009
1010 // Reqc Processing
1011 // ---------------
1012 _reqcActionComboBox = new QComboBox();
1013 _reqcActionComboBox->setEditable(false);
1014 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1015 ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1016 if (ik != -1) {
1017 _reqcActionComboBox->setCurrentIndex(ik);
1018 }
1019 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1020 this, SLOT(slotBncTextChanged()));
1021
1022 QGridLayout* reqcLayout = new QGridLayout;
1023 _reqcActionComboBox->setMinimumWidth(15*ww);
1024 _reqcActionComboBox->setMaximumWidth(15*ww);
1025
1026 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1027 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1028 _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
1029 _reqcObsFileChooser->setMinimumWidth(15*ww);
1030 _reqcObsFileChooser->setMaximumWidth(15*ww);
1031
1032 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1033 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1034 _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
1035 _reqcNavFileChooser->setMinimumWidth(15*ww);
1036 _reqcNavFileChooser->setMaximumWidth(15*ww);
1037
1038 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1039 _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to a RINEX observation output file."));
1040 _reqcOutObsLineEdit->setMinimumWidth(15*ww);
1041 _reqcOutObsLineEdit->setMaximumWidth(15*ww);
1042
1043 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1044 _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to a RINEX navigation output file."));
1045 _reqcOutNavLineEdit->setMinimumWidth(15*ww);
1046 _reqcOutNavLineEdit->setMaximumWidth(15*ww);
1047
1048 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1049 _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1050 _reqcOutLogLineEdit->setMinimumWidth(15*ww);
1051 _reqcOutLogLineEdit->setMaximumWidth(15*ww);
1052
1053 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1054 _reqcPlotDirLineEdit->setWhatsThis(tr("Specify the directory name for saving plots."));
1055 _reqcPlotDirLineEdit->setMinimumWidth(15*ww);
1056 _reqcPlotDirLineEdit->setMaximumWidth(15*ww);
1057
1058 ir = 0;
1059 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check."),ir, 0, 1, 20);
1060 ++ir;
1061 reqcLayout->addWidget(new QLabel("Action"), ir, 0, Qt::AlignLeft);
1062 reqcLayout->addWidget(_reqcActionComboBox, ir, 1, Qt::AlignLeft);
1063 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1064 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3, Qt::AlignRight);
1065 ++ir;
1066 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0, Qt::AlignLeft);
1067 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1, Qt::AlignRight);
1068 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1069 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3, Qt::AlignRight);
1070 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1071 ++ir;
1072 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0, Qt::AlignLeft);
1073 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1, Qt::AlignRight);
1074 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1075 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3, Qt::AlignRight);
1076 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1077 ++ir;
1078 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1, Qt::AlignRight);
1079 reqcLayout->addWidget(new QLabel("Log"), ir, 2, Qt::AlignLeft);
1080 ++ir;
1081 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0, Qt::AlignLeft);
1082 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1, Qt::AlignRight);
1083 ++ir;
1084 reqcLayout->addWidget(new QLabel(""), ir, 1);
1085 reqcLayout->setRowStretch(ir, 999);
1086
1087 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1088 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1089
1090 reqcgroup->setLayout(reqcLayout);
1091
1092 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1093 this, SLOT(slotReqcEditOption()));
1094
1095 // Combine Corrections
1096 // -------------------
1097 QGridLayout* cmbLayout = new QGridLayout;
1098
1099 populateCmbTable();
1100 cmbLayout->addWidget(_cmbTable, 0, 0, 6, 3);
1101 cmbLayout->addWidget(new QLabel(" "), 0, 5);
1102 cmbLayout->addWidget(new QLabel("Combine Broadcast Correction streams."), 0, 6, 1, 50);
1103 cmbLayout->addWidget(new QLabel(" "), 1, 5);
1104 cmbLayout->addWidget(addCmbRowButton, 1, 6);
1105 cmbLayout->addWidget(delCmbRowButton, 1, 7);
1106 cmbLayout->addWidget(new QLabel(" "), 2, 5);
1107 cmbLayout->addWidget(new QLabel("Method"), 2, 6, Qt::AlignRight);
1108 cmbLayout->addWidget(_cmbMethodComboBox, 2, 7, Qt::AlignRight);
1109 cmbLayout->addWidget(new QLabel(" "), 3, 5);
1110 cmbLayout->addWidget(new QLabel("Maximal Residuum"), 3, 6, Qt::AlignRight);
1111 cmbLayout->addWidget(_cmbMaxresLineEdit, 3, 7, Qt::AlignRight);
1112 cmbLayout->addWidget(new QLabel(" "), 4, 5);
1113 cmbLayout->addWidget(new QLabel("Sampling"), 4, 6, Qt::AlignRight);
1114 cmbLayout->addWidget(_cmbSamplSpinBox, 4, 7, Qt::AlignRight);
1115 cmbLayout->addWidget(new QLabel(" "), 5, 0);
1116
1117 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1118 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1119
1120 cmbgroup->setLayout(cmbLayout);
1121
1122 // Upload Layout (Clocks)
1123 // ----------------------
1124 QGridLayout* uploadHlpLayout = new QGridLayout();
1125
1126 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1127 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1128 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1129
1130 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1131 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1132 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1133 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1134 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1135 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1136 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1137 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1138 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1139 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1140 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1141
1142 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1143 populateUploadTable();
1144
1145 uploadLayout->addWidget(new QLabel("Upload RTCMv3 Broadcast Corrections to caster."));
1146 uploadLayout->addWidget(_uploadTable);
1147 uploadLayout->addLayout(uploadHlpLayout);
1148
1149 uploadgroup->setLayout(uploadLayout);
1150
1151 // Upload Layout (Ephemeris)
1152 // -------------------------
1153 QGridLayout* uploadLayoutEph = new QGridLayout;
1154
1155 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1156 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1157 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1158 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1159
1160 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster."), 0, 0, 1, 50);
1161 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1162 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1163 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1164 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1165 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1166 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1167 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1168 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1169 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1170 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1171 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1172 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1173 uploadLayoutEph->addWidget(new QLabel(" "), 5, 0);
1174 uploadLayoutEph->addWidget(new QLabel(" "), 6, 0);
1175
1176 uploadEphgroup->setLayout(uploadLayoutEph);
1177
1178 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1179 this, SLOT(slotBncTextChanged()));
1180
1181 // Main Layout
1182 // -----------
1183 QGridLayout* mLayout = new QGridLayout;
1184 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1185 mLayout->addWidget(_aogroup, 0,0);
1186 mLayout->addWidget(_mountPointsTable, 1,0);
1187 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1188 mLayout->addWidget(_loggroup, 2,0);
1189
1190 _canvas->setLayout(mLayout);
1191
1192 // WhatsThis
1193 // ---------
1194 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1195 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1196 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1197 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1198 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1199 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1200 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1201 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1202 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1203 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1204 _corrTimeSpinBox->setWhatsThis(tr("<p>Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full corr epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application.</p><p>Specifying a value of '0' means that BNC immediately outputs all incoming Broadcast Epemeris Corrections and does not drop any of them for latency reasons.</p>"));
1205 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1206 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1207 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1208 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1209 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1210 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1211 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1212 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1213
1214 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1215 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1216 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1217 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1218 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1219 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1220 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1221 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1222 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1223 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1224 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1225 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1226 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster. The default values can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1227 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1228 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1229 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1230 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1231 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1232 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1233 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1234 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p>"));
1235 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1236 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1237 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1238 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1239 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1240 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1241 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA-GGA messages coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' only when handling a VRS stream and your serial connected receiver doesn't generate NMEA-GGA messages.</p>"));
1242 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
1243 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
1244 _pppMountLineEdit->setWhatsThis(tr("<p>Specify an observations stream by its mountpoint from the 'Streams' list compiled below if you want BNC to estimate coordinates for the affected receiver position through a PPP solution. Example: 'FFMJ1'</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris referring to the satellites' Antenna Phase Centers (APC). Stream CLK11 on NTRIP broadcaster products.igs-ip.net is an example.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver in low repetition rate or don't come at all from there.</p>"));
1245 _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combine Corrections' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
1246 _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
1247 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check following UNAVCO's famous 'teqc' program.</p>"));
1248 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1249 _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
1250 _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
1251 _pppGLONASSCheckBox->setWhatsThis(tr("<p>By default BNC does not use GLONASS observations in PPP mode.</p><p>Tick 'Use GLONASS' for adding GLONASS observations to GPS and Galileo (optional) in a PPP solution.</p>"));
1252 _pppGalileoCheckBox->setWhatsThis(tr("<p>By default BNC does not use Galileo observations in PPP mode.</p><p>Tick 'Use Galileo' for adding Galileo observations to GPS and GLONASS (optional) in a PPP solution.</p>"));
1253 _pppPlotCoordinates->setWhatsThis(tr("<p>BNC will plot PPP results in the 'PPP Plot' tab as North (red), East (green) and Up (blue) displacements when this option is selected. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes.</p><p>Note that a PPP time series makes only sense for a stationary operated receiver."));
1254 _pppNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where PPP results are saved as NMEA messages.</p>"));
1255 _pppNMEAPortLineEdit->setWhatsThis(tr("<p>Specify an IP port number to output PPP results as NMEA messages through an IP port.</p>"));
1256 _pppSigCLineEdit->setWhatsThis(tr("<p>Enter a sigma for your code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of code observations to a PPP solution based on a combination of code and phase data. 5.0 (default) is likely to be an appropriate choice.</p>"));
1257 _pppQuickStartLineEdit->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solution to a known XYZ coordinate as introduced above and adjust a sigma 'XYZ Ini' according to the coordinate's precision. Fixing the coordinate is done in BNC through setting the 'Sigma XYZ Noise' you define below temporarily to zero.</p><p>This so-called Quick-Start option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the know position throughout the startup period.</p><p>A value of 120 is likely to be an appropriate choice for 'Quick-Start'. Default is an empty option field, meaning that you don't want BNC to operate in Quick-Start mode.</p>"));
1258 _pppMaxSolGapLineEdit->setWhatsThis(tr("<p>Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive solutions exceed this limit, the algorithm returns into Quick-Start mode and fixes the introduced reference coordinate for the specified period. A value of '60' seconds could be an appropriate choice.</p><p>This option makes only sense for a stationary operated receiver where solution convergence can be enforced because a good approximation for the rover position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages.</p>"));
1259 _pppSigPLineEdit->setWhatsThis(tr("<p>Enter a sigma for your phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of phase observations to a PPP solutions based on a combination of code and phase data. 0.02 (default) is likely to be an appropriate choice.</p>"));
1260 _pppAverageLineEdit->setWhatsThis(tr("<p>Enter the length of a sliding time window in minutes. BNC will continuously output moving average positions computed from those individual positions obtained most recently throughout this period.</p><p>An empty option field (default) means that you don't want BNC to output moving average positions.</p>"));
1261 _pppSigCrd0->setWhatsThis(tr("<p>Enter a sigma in meters for the initial XYZ coordinate componentes. A value of 100.0 (default) may be an appropriate choice. However, this value may be significantly smaller (i.e. 0.01) when starting for example from a station with known XZY position in Quick-Start mode."));
1262 _pppSigCrdP->setWhatsThis(tr("<p>Enter a sigma in meters for the white noise of estimated XYZ coordinate components. A value of 100.0 (default) may be appropriate considering the potential movement of a rover position.</p>"));
1263 _pppSigTrp0->setWhatsThis(tr("<p>Enter a sigma in meters for the a-priory model based tropospheric delay estimation. A value of 0.1 (default) may be an appropriate choice.</p>"));
1264 _pppSigTrpP->setWhatsThis(tr("<p>Enter a sigma in meters per second to describe the expected variation of the tropospheric effect.</p><p>Supposing 1Hz observation data, a value of 3e-6 (default) would mean that the tropospheric effect may vary for 3600 * 3e-6 = 0.01 meters per hour.</p>"));
1265 _pppRefCrdXLineEdit->setWhatsThis(tr("<p>Enter reference coordinate X of the receiver's position.</p><p>This option only makes sense in static observation conditions.</p>"));
1266 _pppRefCrdYLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Y of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1267 _pppRefCrdZLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Z of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1268 _pppRefdNLineEdit->setWhatsThis(tr("<p>Enter north antenna excentricity.</p>"));
1269 _pppRefdELineEdit->setWhatsThis(tr("<p>Enter east antenna excentricity.</p>"));
1270 _pppRefdULineEdit->setWhatsThis(tr("<p>Enter up antenna excentricity.</p>"));
1271 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1272 _pppSync->setWhatsThis(tr(
1273 "<p> Zero value (or empty field, default) means that BNC processes each epoch of data "
1274 "immediately after its arrival using satellite clock corrections available at "
1275 "that time.</p><p> Non-zero value 'Sync Corr' (i.e. 5) means that the epochs of data "
1276 "are buffered and the processing of each epoch is postponed till the satellite clock "
1277 "corrections not older than 'Sync Corr' seconds are available.<p>"));
1278 _pppAntexFileChooser->setWhatsThis(tr("<p>IGS provides a file containing absolute phase center corrections for GNSS satellite and receiver antennas in ANTEX format. Entering the full path to such an ANTEX file is required for correcting observations for antenna phase center offsets and variations. It allows you to specify the name of your receiver's antenna (as contained in the ANTEX file) to apply such corrections.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets and variations.</p>"));
1279 _pppAntennaLineEdit->setWhatsThis(tr("<p>Specify the receiver's antenna name as defined in your ANTEX file. Observations will be corrected for the antenna phase center's offset which may result in a reduction of a few centimeters at max. Corrections for phase center variations are not yet applied by BNC. The specified name must consist of 20 characters. Add trailing blanks if the antenna name has less then 20 characters.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets.</p>"));
1280 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.<ul><li>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</li><li>Note also that you need to tick 'Use GLONASS' which is part ot the 'PPP (2)' panel in case you want to produce an GPS plus GLONASS combination.</li></ul></p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1281 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1282 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval. Clock and orbit corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1283 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1284 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><ul><li>As an SP3 file contents should be referred to the satellites Center of Mass (CoM) while correctors are referred to the satellites Antenna Phase Center (APC), an offset has to be applied which is available from an IGS ANTEX file. You should therefore specify the 'ANTEX File' path under tab 'PPP (2)' if you want to save the stream contents in SP3 format. If you don't specify an 'ANTEX File' path there, the SP3 file contents will be referred to the satellites APCs.</li></ul></p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1285 _postObsFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Observation file."));
1286 _postNavFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Navigation file."));
1287 _postCorrFileChooser->setWhatsThis(tr("Full path to Broadcast Corrections file as previously saved with BNC in plain ASCII format."));
1288 _postOutLineEdit->setWhatsThis(tr("Full path to file with post processing PPP results. "));
1289 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1290 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1291 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1292 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1293 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1294 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1295 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1296 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1297 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1298
1299 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1300 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1301 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1302 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1303 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1304 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1305
1306 // Enable/Disable all Widgets
1307 // --------------------------
1308 slotBncTextChanged();
1309 enableStartStop();
1310
1311 // Auto start
1312 // ----------
1313 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1314 slotStart();
1315 }
1316}
1317
1318// Destructor
1319////////////////////////////////////////////////////////////////////////////
1320bncWindow::~bncWindow() {
1321 delete _caster;
1322 delete _casterEph;
1323}
1324
1325//
1326////////////////////////////////////////////////////////////////////////////
1327void bncWindow::populateMountPointsTable() {
1328
1329 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1330 _mountPointsTable->removeRow(iRow);
1331 }
1332
1333 bncSettings settings;
1334
1335 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1336 int iRow = 0;
1337 while (it.hasNext()) {
1338 QStringList hlp = it.next().split(" ");
1339 if (hlp.size() < 5) continue;
1340 _mountPointsTable->insertRow(iRow);
1341
1342 QUrl url(hlp[0]);
1343
1344 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1345 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1346 QString nmea(hlp[4]);
1347 if (hlp[5] == "S") {
1348 fullPath = hlp[0].replace(0,2,"");
1349 }
1350 QString ntripVersion = "2";
1351 if (hlp.size() >= 6) {
1352 ntripVersion = (hlp[5]);
1353 }
1354
1355 QTableWidgetItem* it;
1356 it = new QTableWidgetItem(url.userInfo());
1357 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1358 _mountPointsTable->setItem(iRow, 0, it);
1359
1360 it = new QTableWidgetItem(fullPath);
1361 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1362 _mountPointsTable->setItem(iRow, 1, it);
1363
1364 it = new QTableWidgetItem(format);
1365 _mountPointsTable->setItem(iRow, 2, it);
1366
1367 if (nmea == "yes") {
1368 it = new QTableWidgetItem(latitude);
1369 _mountPointsTable->setItem(iRow, 3, it);
1370 it = new QTableWidgetItem(longitude);
1371 _mountPointsTable->setItem(iRow, 4, it);
1372 } else {
1373 it = new QTableWidgetItem(latitude);
1374 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1375 _mountPointsTable->setItem(iRow, 3, it);
1376 it = new QTableWidgetItem(longitude);
1377 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1378 _mountPointsTable->setItem(iRow, 4, it);
1379 }
1380
1381 it = new QTableWidgetItem(nmea);
1382 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1383 _mountPointsTable->setItem(iRow, 5, it);
1384
1385 it = new QTableWidgetItem(ntripVersion);
1386 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1387 _mountPointsTable->setItem(iRow, 6, it);
1388
1389 bncTableItem* bncIt = new bncTableItem();
1390 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1391 _mountPointsTable->setItem(iRow, 7, bncIt);
1392
1393 iRow++;
1394 }
1395
1396 _mountPointsTable->sortItems(1);
1397
1398 enableStartStop();
1399}
1400
1401// Retrieve Table
1402////////////////////////////////////////////////////////////////////////////
1403void bncWindow::slotAddMountPoints() {
1404
1405 bncSettings settings;
1406 QString proxyHost = settings.value("proxyHost").toString();
1407 int proxyPort = settings.value("proxyPort").toInt();
1408 if (proxyHost != _proxyHostLineEdit->text() ||
1409 proxyPort != _proxyPortLineEdit->text().toInt()) {
1410 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1411 "changed. Use the new ones?",
1412 QMessageBox::Yes, QMessageBox::No,
1413 QMessageBox::NoButton);
1414 if (iRet == QMessageBox::Yes) {
1415 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1416 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1417 }
1418 }
1419
1420 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1421 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1422
1423 QMessageBox msgBox;
1424 msgBox.setIcon(QMessageBox::Question);
1425 msgBox.setWindowTitle("Add Stream");
1426 msgBox.setText("Add stream(s) coming from:");
1427
1428 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1429 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1430 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1431 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1432 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1433
1434 msgBox.exec();
1435
1436 if (msgBox.clickedButton() == buttonNtrip) {
1437 bncTableDlg* dlg = new bncTableDlg(this);
1438 dlg->move(this->pos().x()+50, this->pos().y()+50);
1439 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1440 this, SLOT(slotNewMountPoints(QStringList*)));
1441 dlg->exec();
1442 delete dlg;
1443 } else if (msgBox.clickedButton() == buttonIP) {
1444 bncIpPort* ipp = new bncIpPort(this);
1445 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1446 this, SLOT(slotNewMountPoints(QStringList*)));
1447 ipp->exec();
1448 delete ipp;
1449 } else if (msgBox.clickedButton() == buttonUDP) {
1450 bncUdpPort* udp = new bncUdpPort(this);
1451 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1452 this, SLOT(slotNewMountPoints(QStringList*)));
1453 udp->exec();
1454 delete udp;
1455 } else if (msgBox.clickedButton() == buttonSerial) {
1456 bncSerialPort* sep = new bncSerialPort(this);
1457 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1458 this, SLOT(slotNewMountPoints(QStringList*)));
1459 sep->exec();
1460 delete sep;
1461 } else if (msgBox.clickedButton() == buttonCancel) {
1462 // Cancel
1463 }
1464
1465 enableStartStop();
1466}
1467
1468// Delete Selected Mount Points
1469////////////////////////////////////////////////////////////////////////////
1470void bncWindow::slotDeleteMountPoints() {
1471
1472 int nRows = _mountPointsTable->rowCount();
1473 bool flg[nRows];
1474 for (int iRow = 0; iRow < nRows; iRow++) {
1475 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1476 flg[iRow] = true;
1477 }
1478 else {
1479 flg[iRow] = false;
1480 }
1481 }
1482 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1483 if (flg[iRow]) {
1484 _mountPointsTable->removeRow(iRow);
1485 }
1486 }
1487 _actDeleteMountPoints->setEnabled(false);
1488
1489 enableStartStop();
1490}
1491
1492// New Mount Points Selected
1493////////////////////////////////////////////////////////////////////////////
1494void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1495 int iRow = 0;
1496 QListIterator<QString> it(*mountPoints);
1497 while (it.hasNext()) {
1498 QStringList hlp = it.next().split(" ");
1499 QUrl url(hlp[0]);
1500 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1501 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1502 QString nmea(hlp[4]);
1503 if (hlp[5] == "S") {
1504 fullPath = hlp[0].replace(0,2,"");
1505 }
1506 QString ntripVersion = "2";
1507 if (hlp.size() >= 6) {
1508 ntripVersion = (hlp[5]);
1509 }
1510
1511 _mountPointsTable->insertRow(iRow);
1512
1513 QTableWidgetItem* it;
1514 it = new QTableWidgetItem(url.userInfo());
1515 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1516 _mountPointsTable->setItem(iRow, 0, it);
1517
1518 it = new QTableWidgetItem(fullPath);
1519 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1520 _mountPointsTable->setItem(iRow, 1, it);
1521
1522 it = new QTableWidgetItem(format);
1523 _mountPointsTable->setItem(iRow, 2, it);
1524
1525 if (nmea == "yes") {
1526 it = new QTableWidgetItem(latitude);
1527 _mountPointsTable->setItem(iRow, 3, it);
1528 it = new QTableWidgetItem(longitude);
1529 _mountPointsTable->setItem(iRow, 4, it);
1530 } else {
1531 it = new QTableWidgetItem(latitude);
1532 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1533 _mountPointsTable->setItem(iRow, 3, it);
1534 it = new QTableWidgetItem(longitude);
1535 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1536 _mountPointsTable->setItem(iRow, 4, it);
1537 }
1538
1539 it = new QTableWidgetItem(nmea);
1540 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1541 _mountPointsTable->setItem(iRow, 5, it);
1542
1543 it = new QTableWidgetItem(ntripVersion);
1544 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1545 _mountPointsTable->setItem(iRow, 6, it);
1546
1547 bncTableItem* bncIt = new bncTableItem();
1548 _mountPointsTable->setItem(iRow, 7, bncIt);
1549
1550 iRow++;
1551 }
1552 _mountPointsTable->hideColumn(0);
1553 _mountPointsTable->sortItems(1);
1554 delete mountPoints;
1555
1556 enableStartStop();
1557}
1558
1559// Save Options (serialize)
1560////////////////////////////////////////////////////////////////////////////
1561void bncWindow::slotSaveOptions() {
1562 saveOptions();
1563 bncSettings settings;
1564 settings.sync();
1565}
1566
1567// Save Options (memory only)
1568////////////////////////////////////////////////////////////////////////////
1569void bncWindow::saveOptions() {
1570
1571 QStringList mountPoints;
1572 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1573
1574 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1575 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1576 "@" + _mountPointsTable->item(iRow, 1)->text() );
1577
1578 mountPoints.append(url.toString() + " " +
1579 _mountPointsTable->item(iRow, 2)->text()
1580 + " " + _mountPointsTable->item(iRow, 3)->text()
1581 + " " + _mountPointsTable->item(iRow, 4)->text()
1582 + " " + _mountPointsTable->item(iRow, 5)->text()
1583 + " " + _mountPointsTable->item(iRow, 6)->text());
1584 } else {
1585 mountPoints.append(
1586 "//" + _mountPointsTable->item(iRow, 1)->text()
1587 + " " + _mountPointsTable->item(iRow, 2)->text()
1588 + " " + _mountPointsTable->item(iRow, 3)->text()
1589 + " " + _mountPointsTable->item(iRow, 4)->text()
1590 + " " + _mountPointsTable->item(iRow, 5)->text()
1591 + " " + _mountPointsTable->item(iRow, 6)->text());
1592 }
1593 }
1594
1595 QStringList combineStreams;
1596 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1597 QString hlp;
1598 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1599 if (_cmbTable->item(iRow, iCol)) {
1600 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1601 }
1602 }
1603 if (!hlp.isEmpty()) {
1604 combineStreams << hlp;
1605 }
1606 }
1607
1608 QStringList uploadMountpointsOut;
1609 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1610 QString hlp;
1611 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1612 if (_uploadTable->cellWidget(iRow, iCol) &&
1613 (iCol == 3 || iCol == 4 || iCol == 5)) {
1614 if (iCol == 3) {
1615 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1616 hlp += passwd->text() + ",";
1617 }
1618 else if (iCol == 4) {
1619 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1620 hlp += system->currentText() + ",";
1621 }
1622 else if (iCol == 5) {
1623 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1624 QString state; state.setNum(com->checkState());
1625 hlp += state + ",";
1626 }
1627 }
1628 else if (_uploadTable->item(iRow, iCol)) {
1629 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1630 }
1631 }
1632 if (!hlp.isEmpty()) {
1633 uploadMountpointsOut << hlp;
1634 }
1635 }
1636
1637 bncSettings settings;
1638
1639 settings.setValue("startTab", _aogroup->currentIndex());
1640 settings.setValue("statusTab", _loggroup->currentIndex());
1641 settings.setValue("mountPoints", mountPoints);
1642// Network
1643 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1644 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1645 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1646 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1647// General
1648 settings.setValue("logFile", _logFileLineEdit->text());
1649 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1650 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1651 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1652 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1653// RINEX Observations
1654 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1655 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1656 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1657 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1658 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1659 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1660// RINEX Ephemeris
1661 settings.setValue("ephPath", _ephPathLineEdit->text());
1662 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1663 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1664 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1665// Broadcast Corrections
1666 settings.setValue("corrPath", _corrPathLineEdit->text());
1667 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1668 settings.setValue("corrPort", _corrPortLineEdit->text());
1669 settings.setValue("corrTime", _corrTimeSpinBox->value());
1670// Feed Engine
1671 settings.setValue("outPort", _outPortLineEdit->text());
1672 settings.setValue("waitTime", _waitTimeSpinBox->value());
1673 settings.setValue("binSampl", _binSamplSpinBox->value());
1674 settings.setValue("outFile", _outFileLineEdit->text());
1675 settings.setValue("outUPort", _outUPortLineEdit->text());
1676// Serial Output
1677 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1678 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1679 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1680 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1681 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1682 settings.setValue("serialParity", _serialParityComboBox->currentText());
1683 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1684 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1685 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1686 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1687// Outages
1688 settings.setValue("obsRate", _obsRateComboBox->currentText());
1689 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1690 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1691 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1692// Miscellaneous
1693 settings.setValue("miscMount", _miscMountLineEdit->text());
1694 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1695 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1696// PPPP
1697 settings.setValue("pppSPP", _pppSPPComboBox->currentText());
1698 settings.setValue("pppMount", _pppMountLineEdit->text());
1699 settings.setValue("pppCorrMount",_pppCorrMountLineEdit->text());
1700 settings.setValue("pppRefCrdX", _pppRefCrdXLineEdit->text());
1701 settings.setValue("pppRefCrdY", _pppRefCrdYLineEdit->text());
1702 settings.setValue("pppRefCrdZ", _pppRefCrdZLineEdit->text());
1703 settings.setValue("pppRefdN", _pppRefdNLineEdit->text());
1704 settings.setValue("pppRefdE", _pppRefdELineEdit->text());
1705 settings.setValue("pppRefdU", _pppRefdULineEdit->text());
1706 settings.setValue("nmeaFile", _pppNMEALineEdit->text());
1707 settings.setValue("nmeaPort", _pppNMEAPortLineEdit->text());
1708 settings.setValue("pppPlotCoordinates", _pppPlotCoordinates->checkState());
1709 settings.setValue("postObsFile", _postObsFileChooser->fileName());
1710 settings.setValue("postNavFile", _postNavFileChooser->fileName());
1711 settings.setValue("postCorrFile", _postCorrFileChooser->fileName());
1712 settings.setValue("postOutFile", _postOutLineEdit->text());
1713 settings.setValue("pppAntenna", _pppAntennaLineEdit->text());
1714 settings.setValue("pppAntex", _pppAntexFileChooser->fileName());
1715 settings.setValue("pppUsePhase", _pppUsePhaseCheckBox->checkState());
1716 settings.setValue("pppEstTropo", _pppEstTropoCheckBox->checkState());
1717 settings.setValue("pppGLONASS", _pppGLONASSCheckBox->checkState());
1718 settings.setValue("pppGalileo", _pppGalileoCheckBox->checkState());
1719 settings.setValue("pppSync", _pppSync->text());
1720 settings.setValue("pppAverage", _pppAverageLineEdit->text());
1721 settings.setValue("pppQuickStart", _pppQuickStartLineEdit->text());
1722 settings.setValue("pppMaxSolGap", _pppMaxSolGapLineEdit->text());
1723 settings.setValue("pppSigmaCode",_pppSigCLineEdit->text());
1724 settings.setValue("pppSigmaPhase",_pppSigPLineEdit->text());
1725 settings.setValue("pppSigCrd0",_pppSigCrd0->text());
1726 settings.setValue("pppSigCrdP",_pppSigCrdP->text());
1727 settings.setValue("pppSigTrp0",_pppSigTrp0->text());
1728 settings.setValue("pppSigTrpP",_pppSigTrpP->text());
1729// Reqc
1730 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1731 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1732 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1733 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1734 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1735 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1736 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1737// Combine Corrections
1738 if (!combineStreams.isEmpty()) {
1739 settings.setValue("combineStreams", combineStreams);
1740 }
1741 else {
1742 settings.setValue("combineStreams", "");
1743 }
1744 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1745 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1746 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1747// Upload Corrections
1748 if (!uploadMountpointsOut.isEmpty()) {
1749 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1750 }
1751 else {
1752 settings.setValue("uploadMountpointsOut", "");
1753 }
1754 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1755 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1756 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1757 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1758// Upload Ephemeris
1759 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1760 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1761 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1762 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1763 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1764 if (_caster) {
1765 _caster->readMountPoints();
1766 }
1767}
1768
1769// All get slots terminated
1770////////////////////////////////////////////////////////////////////////////
1771void bncWindow::slotGetThreadsFinished() {
1772 ((bncApp*)qApp)->slotMessage("All Get Threads Terminated", true);
1773 delete _caster; _caster = 0;
1774 delete _casterEph; _casterEph = 0;
1775 _runningRealTime = false;
1776}
1777
1778// Start It!
1779////////////////////////////////////////////////////////////////////////////
1780void bncWindow::slotStart() {
1781 saveOptions();
1782 if ( _pppSPPComboBox->currentText() == "Post-Processing" ) {
1783 startPostProcessingPPP();
1784 }
1785 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1786 startPostProcessingReqc();
1787 }
1788 else {
1789 startRealTime();
1790 }
1791}
1792
1793// Start Real-Time (Retrieve Data etc.)
1794////////////////////////////////////////////////////////////////////////////
1795void bncWindow::startRealTime() {
1796
1797 _runningRealTime = true;
1798
1799 _bncFigurePPP->reset();
1800
1801 _actDeleteMountPoints->setEnabled(false);
1802
1803 enableStartStop();
1804
1805 _caster = new bncCaster(_outFileLineEdit->text(),
1806 _outPortLineEdit->text().toInt());
1807
1808 ((bncApp*)qApp)->setPort(_outEphPortLineEdit->text().toInt());
1809 ((bncApp*)qApp)->setPortCorr(_corrPortLineEdit->text().toInt());
1810 ((bncApp*)qApp)->initCombination();
1811
1812 connect(_caster, SIGNAL(getThreadsFinished()),
1813 this, SLOT(slotGetThreadsFinished()));
1814
1815 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
1816 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
1817
1818 ((bncApp*)qApp)->slotMessage("========== Start BNC v" BNCVERSION " =========", true);
1819
1820 bncSettings settings;
1821
1822 QDir rnxdir(settings.value("rnxPath").toString());
1823 if (!rnxdir.exists()) ((bncApp*)qApp)->slotMessage("Cannot find RINEX Observations directory", true);
1824
1825 QString rnx_file = settings.value("rnxScript").toString();
1826 if ( !rnx_file.isEmpty() ) {
1827 QFile rnxfile(settings.value("rnxScript").toString());
1828 if (!rnxfile.exists()) ((bncApp*)qApp)->slotMessage("Cannot find RINEX Observations script", true);
1829 }
1830
1831 QDir ephdir(settings.value("ephPath").toString());
1832 if (!ephdir.exists()) ((bncApp*)qApp)->slotMessage("Cannot find RINEX Ephemeris directory", true);
1833
1834 QDir corrdir(settings.value("corrPath").toString());
1835 if (!corrdir.exists()) ((bncApp*)qApp)->slotMessage("Cannot find Broadcast Corrections directory", true);
1836
1837 QString advise_file = settings.value("adviseScript").toString();
1838 if ( !advise_file.isEmpty() ) {
1839 QFile advisefile(settings.value("adviseScript").toString());
1840 if (!advisefile.exists()) ((bncApp*)qApp)->slotMessage("Cannot find Outages script", true);
1841 }
1842
1843 QString ant_file = settings.value("pppAntex").toString();
1844 if ( !ant_file.isEmpty() ) {
1845 QFile anxfile(settings.value("pppAntex").toString());
1846 if (!anxfile.exists()) ((bncApp*)qApp)->slotMessage("Cannot find IGS ANTEX file", true);
1847 }
1848
1849 _caster->readMountPoints();
1850
1851 _casterEph = new bncEphUploadCaster();
1852 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
1853 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
1854}
1855
1856// Retrieve Data
1857////////////////////////////////////////////////////////////////////////////
1858void bncWindow::slotStop() {
1859 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
1860 QMessageBox::Yes, QMessageBox::No,
1861 QMessageBox::NoButton);
1862 if (iRet == QMessageBox::Yes) {
1863 ((bncApp*)qApp)->stopCombination();
1864 delete _caster; _caster = 0;
1865 delete _casterEph; _casterEph = 0;
1866 _runningRealTime = false;
1867 enableStartStop();
1868 }
1869}
1870
1871// Close Application gracefully
1872////////////////////////////////////////////////////////////////////////////
1873void bncWindow::closeEvent(QCloseEvent* event) {
1874
1875 int iRet = QMessageBox::question(this, "Close", "Save Options?",
1876 QMessageBox::Yes, QMessageBox::No,
1877 QMessageBox::Cancel);
1878
1879 if (iRet == QMessageBox::Cancel) {
1880 event->ignore();
1881 return;
1882 }
1883 else if (iRet == QMessageBox::Yes) {
1884 slotSaveOptions();
1885 }
1886
1887 QMainWindow::closeEvent(event);
1888}
1889
1890// User changed the selection of mountPoints
1891////////////////////////////////////////////////////////////////////////////
1892void bncWindow::slotSelectionChanged() {
1893 if (_mountPointsTable->selectedItems().isEmpty()) {
1894 _actDeleteMountPoints->setEnabled(false);
1895 }
1896 else {
1897 _actDeleteMountPoints->setEnabled(true);
1898 }
1899}
1900
1901// Display Program Messages
1902////////////////////////////////////////////////////////////////////////////
1903void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
1904
1905#ifdef DEBUG_RTCM2_2021
1906 const int maxBufferSize = 1000;
1907#else
1908 const int maxBufferSize = 10000;
1909#endif
1910
1911 if (! showOnScreen ) {
1912 return;
1913 }
1914
1915 QString txt = _log->toPlainText() + "\n" +
1916 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
1917 _log->clear();
1918 _log->append(txt.right(maxBufferSize));
1919}
1920
1921// About Message
1922////////////////////////////////////////////////////////////////////////////
1923void bncWindow::slotAbout() {
1924 new bncAboutDlg(0);
1925}
1926
1927//Flowchart
1928////////////////////////////////////////////////////////////////////////////
1929void bncWindow::slotFlowchart() {
1930 new bncFlowchartDlg(0);
1931}
1932
1933// Help Window
1934////////////////////////////////////////////////////////////////////////////
1935void bncWindow::slotHelp() {
1936 QUrl url;
1937 url.setPath(":bnchelp.html");
1938 new bncHlpDlg(0, url);
1939}
1940
1941// Select Fonts
1942////////////////////////////////////////////////////////////////////////////
1943void bncWindow::slotFontSel() {
1944 bool ok;
1945 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
1946 if (ok) {
1947 bncSettings settings;
1948 settings.setValue("font", newFont.toString());
1949 QApplication::setFont(newFont);
1950 int ww = QFontMetrics(newFont).width('w');
1951 setMinimumSize(60*ww, 80*ww);
1952 resize(60*ww, 80*ww);
1953 }
1954}
1955
1956// Whats This Help
1957void bncWindow::slotWhatsThis() {
1958 QWhatsThis::enterWhatsThisMode();
1959}
1960
1961//
1962////////////////////////////////////////////////////////////////////////////
1963void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
1964 _bncFigure->updateMountPoints();
1965 _bncFigureLate->updateMountPoints();
1966
1967 populateMountPointsTable();
1968 bncSettings settings;
1969 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
1970 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
1971 QListIterator<bncGetThread*> iTh(threads);
1972 while (iTh.hasNext()) {
1973 bncGetThread* thread = iTh.next();
1974 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1975 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1976 "@" + _mountPointsTable->item(iRow, 1)->text() );
1977 if (url == thread->mountPoint() &&
1978 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
1979 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
1980 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
1981 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
1982 _bncFigure, SLOT(slotNewData(QByteArray, double)));
1983 connect(thread, SIGNAL(newBytes(QByteArray, double)),
1984 _bncFigure, SLOT(slotNewData(QByteArray, double)));
1985 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
1986 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
1987 connect(thread, SIGNAL(newLatency(QByteArray, double)),
1988 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
1989 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
1990 disconnect(thread,
1991 SIGNAL(newPosition(bncTime, double, double, double)),
1992 _bncFigurePPP,
1993 SLOT(slotNewPosition(bncTime, double, double, double)));
1994 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
1995 _bncFigurePPP,
1996 SLOT(slotNewPosition(bncTime, double, double, double)));
1997 }
1998 break;
1999 }
2000 }
2001 }
2002}
2003
2004//
2005////////////////////////////////////////////////////////////////////////////
2006void bncWindow::CreateMenu() {
2007 // Create Menus
2008 // ------------
2009 _menuFile = menuBar()->addMenu(tr("&File"));
2010 _menuFile->addAction(_actFontSel);
2011 _menuFile->addSeparator();
2012 _menuFile->addAction(_actSaveOpt);
2013 _menuFile->addSeparator();
2014 _menuFile->addAction(_actQuit);
2015
2016 _menuHlp = menuBar()->addMenu(tr("&Help"));
2017 _menuHlp->addAction(_actHelp);
2018 _menuHlp->addAction(_actFlowchart);
2019 _menuHlp->addAction(_actAbout);
2020}
2021
2022// Toolbar
2023////////////////////////////////////////////////////////////////////////////
2024void bncWindow::AddToolbar() {
2025 QToolBar* toolBar = new QToolBar;
2026 addToolBar(Qt::BottomToolBarArea, toolBar);
2027 toolBar->setMovable(false);
2028 toolBar->addAction(_actAddMountPoints);
2029 toolBar->addAction(_actDeleteMountPoints);
2030 toolBar->addAction(_actStart);
2031 toolBar->addAction(_actStop);
2032 toolBar->addWidget(new QLabel(" "));
2033 toolBar->addAction(_actwhatsthis);
2034}
2035
2036// About
2037////////////////////////////////////////////////////////////////////////////
2038bncAboutDlg::bncAboutDlg(QWidget* parent) :
2039 QDialog(parent) {
2040
2041 QTextBrowser* tb = new QTextBrowser;
2042 QUrl url; url.setPath(":bncabout.html");
2043 tb->setSource(url);
2044 tb->setReadOnly(true);
2045
2046 int ww = QFontMetrics(font()).width('w');
2047 QPushButton* _closeButton = new QPushButton("Close");
2048 _closeButton->setMaximumWidth(10*ww);
2049 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2050
2051 QGridLayout* dlgLayout = new QGridLayout();
2052 QLabel* img = new QLabel();
2053 img->setPixmap(QPixmap(":ntrip-logo.png"));
2054 dlgLayout->addWidget(img, 0,0);
2055 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2056 dlgLayout->addWidget(tb,1,0,1,2);
2057 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2058
2059 setLayout(dlgLayout);
2060 resize(60*ww, 60*ww);
2061 setWindowTitle("About BNC");
2062 show();
2063}
2064
2065//
2066////////////////////////////////////////////////////////////////////////////
2067bncAboutDlg::~bncAboutDlg() {
2068};
2069
2070// Flowchart
2071////////////////////////////////////////////////////////////////////////////
2072bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2073 QDialog(parent) {
2074
2075 int ww = QFontMetrics(font()).width('w');
2076 QPushButton* _closeButton = new QPushButton("Close");
2077 _closeButton->setMaximumWidth(10*ww);
2078 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2079
2080 QGridLayout* dlgLayout = new QGridLayout();
2081 QLabel* img = new QLabel();
2082 img->setPixmap(QPixmap(":bncflowchart.png"));
2083 dlgLayout->addWidget(img, 0,0);
2084 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2085
2086 setLayout(dlgLayout);
2087 setWindowTitle("Flow Chart");
2088 show();
2089}
2090
2091//
2092////////////////////////////////////////////////////////////////////////////
2093bncFlowchartDlg::~bncFlowchartDlg() {
2094};
2095
2096// Enable/Disable Widget (and change its color)
2097////////////////////////////////////////////////////////////////////////////
2098void bncWindow::enableWidget(bool enable, QWidget* widget) {
2099 const static QPalette paletteWhite(QColor(255, 255, 255));
2100 const static QPalette paletteGray(QColor(230, 230, 230));
2101
2102 widget->setEnabled(enable);
2103 if (enable) {
2104 widget->setPalette(paletteWhite);
2105 }
2106 else {
2107 widget->setPalette(paletteGray);
2108 }
2109}
2110
2111// Bnc Text
2112////////////////////////////////////////////////////////////////////////////
2113void bncWindow::slotBncTextChanged(){
2114
2115 bool enable = true;
2116
2117 // Proxy
2118 //------
2119 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2120 enable = !_proxyHostLineEdit->text().isEmpty();
2121 enableWidget(enable, _proxyPortLineEdit);
2122 }
2123
2124 // RINEX Observations
2125 // ------------------
2126 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2127 enable = !_rnxPathLineEdit->text().isEmpty();
2128 enableWidget(enable, _rnxSamplSpinBox);
2129 enableWidget(enable, _rnxSkelLineEdit);
2130 enableWidget(enable, _rnxScrpLineEdit);
2131 enableWidget(enable, _rnxV3CheckBox);
2132 enableWidget(enable, _rnxIntrComboBox);
2133 }
2134
2135 // RINEX Ephemeris
2136 // ---------------
2137 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2138 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2139 enableWidget(enable, _ephIntrComboBox);
2140 enableWidget(enable, _ephV3CheckBox);
2141 }
2142
2143 // Broadcast Corrections
2144 // ---------------------
2145 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2146 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2147 enableWidget(enable, _corrIntrComboBox);
2148 }
2149
2150 // Feed Engine
2151 // -----------
2152 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2153 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2154 enableWidget(enable, _waitTimeSpinBox);
2155 enableWidget(enable, _binSamplSpinBox);
2156 }
2157
2158 // Serial Output
2159 // -------------
2160 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2161 sender() == _serialAutoNMEAComboBox) {
2162 enable = !_serialMountPointLineEdit->text().isEmpty();
2163 enableWidget(enable, _serialPortNameLineEdit);
2164 enableWidget(enable, _serialBaudRateComboBox);
2165 enableWidget(enable, _serialParityComboBox);
2166 enableWidget(enable, _serialDataBitsComboBox);
2167 enableWidget(enable, _serialStopBitsComboBox);
2168 enableWidget(enable, _serialFlowControlComboBox);
2169 enableWidget(enable, _serialAutoNMEAComboBox);
2170
2171 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() != "Auto";
2172 enableWidget(enable2, _serialFileNMEALineEdit);
2173 }
2174
2175 // Outages
2176 // -------
2177 if (sender() == 0 || sender() == _obsRateComboBox) {
2178 enable = !_obsRateComboBox->currentText().isEmpty();
2179 enableWidget(enable, _adviseFailSpinBox);
2180 enableWidget(enable, _adviseRecoSpinBox);
2181 enableWidget(enable, _adviseScriptLineEdit);
2182 }
2183
2184 // Miscellaneous
2185 // -------------
2186 if (sender() == 0 || sender() == _miscMountLineEdit) {
2187 enable = !_miscMountLineEdit->text().isEmpty();
2188 enableWidget(enable, _perfIntrComboBox);
2189 enableWidget(enable, _scanRTCMCheckBox);
2190 }
2191
2192 // Enable/disable Broadcast Ephemerides
2193 // ------------------------------------
2194 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2195 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2196 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2197 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2198 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2199 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2200 _uploadEphPortLineEdit->setEnabled(true);
2201 _uploadEphMountpointLineEdit->setEnabled(true);
2202 _uploadEphPasswordLineEdit->setEnabled(true);
2203 _uploadEphSampleSpinBox->setEnabled(true);
2204 }
2205 else {
2206 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2207 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2208 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2209 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2210 _uploadEphPortLineEdit->setEnabled(false);
2211 _uploadEphMountpointLineEdit->setEnabled(false);
2212 _uploadEphPasswordLineEdit->setEnabled(false);
2213 _uploadEphSampleSpinBox->setEnabled(false);
2214 }
2215 }
2216
2217 // Combine Corrections
2218 // -------------------
2219 if (sender() == 0 || sender() == _cmbTable) {
2220 int iRow = _cmbTable->rowCount();
2221 if (iRow > 0) {
2222 enableWidget(true, _cmbMethodComboBox);
2223 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2224 _cmbMaxresLineEdit->setEnabled(true);
2225 _cmbSamplSpinBox->setEnabled(true);
2226 }
2227 else {
2228 enableWidget(false, _cmbMethodComboBox);
2229 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2230 _cmbMaxresLineEdit->setEnabled(false);
2231 _cmbSamplSpinBox->setEnabled(false);
2232 }
2233 }
2234
2235 // Upload(clk)
2236 // -----------
2237 int iRow = _uploadTable->rowCount();
2238 if (iRow > 0) {
2239 enableWidget(true, _uploadIntrComboBox);
2240 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2241 enableWidget(true, _uploadSamplClkRnxSpinBox);
2242 enableWidget(true, _uploadSamplSp3SpinBox);
2243 }
2244 else {
2245 enableWidget(false, _uploadIntrComboBox);
2246 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2247 enableWidget(false, _uploadSamplClkRnxSpinBox);
2248 enableWidget(false, _uploadSamplSp3SpinBox);
2249 }
2250
2251 // PPP Client
2252 // ----------
2253 if (sender() == 0
2254 || sender() == _pppMountLineEdit
2255 || sender() == _pppCorrMountLineEdit
2256 || sender() == _pppRefCrdXLineEdit
2257 || sender() == _pppRefCrdYLineEdit
2258 || sender() == _pppRefCrdZLineEdit
2259 || sender() == _pppRefdNLineEdit
2260 || sender() == _pppRefdELineEdit
2261 || sender() == _pppRefdULineEdit
2262 || sender() == _pppSync
2263 || sender() == _pppSPPComboBox
2264 || sender() == _pppQuickStartLineEdit
2265 || sender() == _pppEstTropoCheckBox
2266 || sender() == _pppUsePhaseCheckBox
2267 || sender() == _pppAntexFileChooser ) {
2268
2269 enable = !_pppSPPComboBox->currentText().isEmpty();
2270 if (enable) {
2271 enable = (!_pppMountLineEdit->text().isEmpty() && !_pppCorrMountLineEdit->text().isEmpty()) ||
2272 (!_pppMountLineEdit->text().isEmpty() && _pppSPPComboBox->currentText() == "Realtime-SPP") ||
2273 (_pppSPPComboBox->currentText() == "Post-Processing");
2274 }
2275
2276 enableWidget(enable, _pppNMEALineEdit);
2277 enableWidget(enable, _pppNMEAPortLineEdit);
2278 enableWidget(enable, _pppRefCrdXLineEdit);
2279 enableWidget(enable, _pppRefCrdYLineEdit);
2280 enableWidget(enable, _pppRefCrdZLineEdit);
2281 enableWidget(enable, _pppRefdNLineEdit);
2282 enableWidget(enable, _pppRefdELineEdit);
2283 enableWidget(enable, _pppRefdULineEdit);
2284 enableWidget(enable, _pppUsePhaseCheckBox);
2285 enableWidget(enable, _pppPlotCoordinates);
2286 enableWidget(enable, _pppEstTropoCheckBox);
2287// enableWidget(enable, _pppGLONASSCheckBox);
2288 enableWidget(enable, _pppGalileoCheckBox);
2289// enableWidget(enable, _pppAntexFileChooser);
2290 enableWidget(enable, _pppSigCLineEdit);
2291 enableWidget(enable, _pppSigCrd0);
2292 enableWidget(enable, _pppSigCrdP);
2293
2294 bool enable2 = enable && !_pppRefCrdXLineEdit->text().isEmpty() &&
2295 !_pppRefCrdYLineEdit->text().isEmpty() &&
2296 !_pppRefCrdZLineEdit->text().isEmpty();
2297
2298 enableWidget(enable2, _pppAverageLineEdit);
2299 enableWidget(enable2, _pppQuickStartLineEdit);
2300
2301 bool enable3 = enable2 && !_pppQuickStartLineEdit->text().isEmpty();
2302 enableWidget(enable3, _pppMaxSolGapLineEdit);
2303
2304 bool enable4 = enable && !_pppAntexFileChooser->fileName().isEmpty();
2305 enableWidget(enable4, _pppAntennaLineEdit);
2306
2307 bool enable5 = enable && _pppEstTropoCheckBox->isChecked();
2308 enableWidget(enable5, _pppSigTrp0);
2309 enableWidget(enable5, _pppSigTrpP);
2310
2311 bool enable6 = enable && _pppUsePhaseCheckBox->isChecked();
2312 enableWidget(enable6, _pppSigPLineEdit);
2313
2314 bool enable7 = enable && _pppSPPComboBox->currentText() == "Realtime-PPP";
2315 enableWidget(enable7, _pppSync);
2316
2317 bool enable8 = _pppSPPComboBox->currentText() == "Realtime-PPP";
2318 enableWidget(enable8, _pppCorrMountLineEdit);
2319
2320 bool enable9 = _pppSPPComboBox->currentText() == "Post-Processing";
2321 enableWidget(enable9, _postObsFileChooser);
2322 enableWidget(enable9, _postNavFileChooser);
2323 enableWidget(enable9, _postCorrFileChooser);
2324 enableWidget(enable9, _postOutLineEdit);
2325
2326 bool enable10 = !_pppSPPComboBox->currentText().isEmpty() && !enable9;
2327 enableWidget(enable10, _pppMountLineEdit);
2328 }
2329
2330 if (sender() == 0 || sender() == _reqcActionComboBox) {
2331 enable = !_reqcActionComboBox->currentText().isEmpty();
2332 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2333 enableWidget(enable && enable10, _reqcEditOptionButton);
2334 enableWidget(enable, _reqcObsFileChooser);
2335 enableWidget(enable, _reqcNavFileChooser);
2336 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2337 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2338 enableWidget(enable, _reqcOutLogLineEdit);
2339 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2340 }
2341
2342 enableStartStop();
2343}
2344
2345//
2346////////////////////////////////////////////////////////////////////////////
2347void bncWindow::slotAddCmbRow() {
2348 int iRow = _cmbTable->rowCount();
2349 _cmbTable->insertRow(iRow);
2350 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2351 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2352 }
2353}
2354
2355//
2356////////////////////////////////////////////////////////////////////////////
2357void bncWindow::slotDelCmbRow() {
2358 int nRows = _cmbTable->rowCount();
2359 bool flg[nRows];
2360 for (int iRow = 0; iRow < nRows; iRow++) {
2361 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2362 flg[iRow] = true;
2363 }
2364 else {
2365 flg[iRow] = false;
2366 }
2367 }
2368 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2369 if (flg[iRow]) {
2370 _cmbTable->removeRow(iRow);
2371 }
2372 }
2373 nRows = _cmbTable->rowCount();
2374 if (nRows < 1) {
2375 enableWidget(false, _cmbMethodComboBox);
2376 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2377 _cmbMaxresLineEdit->setEnabled(false);
2378 _cmbSamplSpinBox->setEnabled(false);
2379 }
2380}
2381
2382//
2383////////////////////////////////////////////////////////////////////////////
2384void bncWindow::populateCmbTable() {
2385
2386 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2387 _cmbTable->removeRow(iRow);
2388 }
2389
2390 bncSettings settings;
2391
2392 int iRow = -1;
2393 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2394 while (it.hasNext()) {
2395 QStringList hlp = it.next().split(" ");
2396 if (hlp.size() > 2) {
2397 ++iRow;
2398 _cmbTable->insertRow(iRow);
2399 }
2400 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2401 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2402 }
2403 }
2404}
2405
2406//
2407////////////////////////////////////////////////////////////////////////////
2408void bncWindow::slotAddUploadRow() {
2409 int iRow = _uploadTable->rowCount();
2410 _uploadTable->insertRow(iRow);
2411 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2412 if (iCol == 3) {
2413 QLineEdit* passwd = new QLineEdit();
2414 passwd->setFrame(false);
2415 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2416 _uploadTable->setCellWidget(iRow, iCol, passwd);
2417 }
2418 else if (iCol == 4) {
2419 QComboBox* system = new QComboBox();
2420 system->setEditable(false);
2421 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2422 system->setFrame(false);
2423 _uploadTable->setCellWidget(iRow, iCol, system);
2424 }
2425 else if (iCol == 5) {
2426 QCheckBox* com = new QCheckBox();
2427 _uploadTable->setCellWidget(iRow, iCol, com);
2428 }
2429 else if (iCol == 11) {
2430 bncTableItem* bncIt = new bncTableItem();
2431 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2432 _uploadTable->setItem(iRow, iCol, bncIt);
2433 ((bncApp*)qApp)->_uploadTableItems[iRow] = bncIt;
2434 }
2435 else {
2436 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2437 }
2438 }
2439}
2440
2441//
2442////////////////////////////////////////////////////////////////////////////
2443void bncWindow::slotDelUploadRow() {
2444 ((bncApp*)qApp)->_uploadTableItems.clear();
2445 int nRows = _uploadTable->rowCount();
2446 bool flg[nRows];
2447 for (int iRow = 0; iRow < nRows; iRow++) {
2448 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2449 flg[iRow] = true;
2450 }
2451 else {
2452 flg[iRow] = false;
2453 }
2454 }
2455 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2456 if (flg[iRow]) {
2457 _uploadTable->removeRow(iRow);
2458 }
2459 }
2460 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2461 ((bncApp*)qApp)->_uploadTableItems[iRow] =
2462 (bncTableItem*) _uploadTable->item(iRow, 11);
2463 }
2464 nRows = _uploadTable->rowCount();
2465 if (nRows < 1) {
2466 enableWidget(false, _uploadIntrComboBox);
2467 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2468 enableWidget(false, _uploadSamplSp3SpinBox);
2469 enableWidget(false, _uploadSamplClkRnxSpinBox);
2470 }
2471}
2472
2473//
2474////////////////////////////////////////////////////////////////////////////
2475void bncWindow::populateUploadTable() {
2476 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2477 _uploadTable->removeRow(iRow);
2478 }
2479
2480 bncSettings settings;
2481
2482 int iRow = -1;
2483 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2484 while (it.hasNext()) {
2485 QStringList hlp = it.next().split(",");
2486 if (hlp.size() > 6) {
2487 ++iRow;
2488 _uploadTable->insertRow(iRow);
2489 }
2490 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2491 if (iCol == 3) {
2492 QLineEdit* passwd = new QLineEdit();
2493 passwd->setFrame(false);
2494 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2495 passwd->setText(hlp[iCol]);
2496 _uploadTable->setCellWidget(iRow, iCol, passwd);
2497 }
2498 else if (iCol == 4) {
2499 QComboBox* system = new QComboBox();
2500 system->setEditable(false);
2501 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,Custom").split(","));
2502 system->setFrame(false);
2503 system->setCurrentIndex(system->findText(hlp[iCol]));
2504 _uploadTable->setCellWidget(iRow, iCol, system);
2505 }
2506 else if (iCol == 5) {
2507 QCheckBox* com = new QCheckBox();
2508 if (hlp[iCol].toInt() == Qt::Checked) {
2509 com->setCheckState(Qt::Checked);
2510 }
2511 _uploadTable->setCellWidget(iRow, iCol, com);
2512 }
2513 else if (iCol == 11) {
2514 bncTableItem* bncIt = new bncTableItem();
2515 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2516 _uploadTable->setItem(iRow, iCol, bncIt);
2517 ((bncApp*)qApp)->_uploadTableItems[iRow] = bncIt;
2518 }
2519 else {
2520 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2521 }
2522 }
2523 }
2524}
2525
2526//
2527////////////////////////////////////////////////////////////////////////////
2528void bncWindow::slotSetUploadTrafo() {
2529 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2530 dlg->exec();
2531 delete dlg;
2532}
2533
2534// Start Post-Processing PPP
2535////////////////////////////////////////////////////////////////////////////
2536void bncWindow::startPostProcessingPPP() {
2537#ifdef USE_POSTPROCESSING
2538 _runningPostProcessingPPP = true;
2539 _actStart->setText("0 Epochs");
2540 enableStartStop();
2541
2542 t_postProcessing* postProcessing = new t_postProcessing(this);
2543 connect(postProcessing, SIGNAL(finished()), this, SLOT(slotFinishedPostProcessingPPP()));
2544 connect(postProcessing, SIGNAL(progress(int)), this, SLOT(slotPostProgress(int)));
2545
2546 postProcessing->start();
2547#else
2548 QMessageBox::information(this, "Information",
2549 "Post-Processing Not Permitted");
2550#endif
2551}
2552
2553// Post-Processing PPP Finished
2554////////////////////////////////////////////////////////////////////////////
2555void bncWindow::slotFinishedPostProcessingPPP() {
2556 _runningPostProcessingPPP = false;
2557 QMessageBox::information(this, "Information",
2558 "Post-Processing Thread Finished");
2559 _actStart->setText("Start");
2560 enableStartStop();
2561}
2562
2563// Progress Bar Change
2564////////////////////////////////////////////////////////////////////////////
2565void bncWindow::slotPostProgress(int nEpo) {
2566 if (_actStart) {
2567 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2568 }
2569}
2570
2571// Start Post-Processing Reqc
2572////////////////////////////////////////////////////////////////////////////
2573void bncWindow::startPostProcessingReqc() {
2574#ifdef USE_POSTPROCESSING
2575 _runningPostProcessingReqc = true;
2576 enableStartStop();
2577 if (_reqcActionComboBox->currentText() == "Analyze") {
2578 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2579 connect(reqcAnalyze, SIGNAL(finished()),
2580 this, SLOT(slotFinishedPostProcessingReqc()));
2581 reqcAnalyze->start();
2582 }
2583 else {
2584 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2585 connect(reqcEdit, SIGNAL(finished()),
2586 this, SLOT(slotFinishedPostProcessingReqc()));
2587 reqcEdit->start();
2588 }
2589#else
2590 QMessageBox::information(this, "Information",
2591 "Post-Processing Not Permitted");
2592#endif
2593}
2594
2595// Post-Processing Reqc Finished
2596////////////////////////////////////////////////////////////////////////////
2597void bncWindow::slotFinishedPostProcessingReqc() {
2598 _runningPostProcessingReqc = false;
2599 if (_reqcActionComboBox->currentText() != "Analyze") {
2600 QMessageBox::information(this, "Information",
2601 "RINEX Processing Thread Finished");
2602 }
2603 enableStartStop();
2604}
2605
2606// Edit teqc-like editing options
2607////////////////////////////////////////////////////////////////////////////
2608void bncWindow::slotReqcEditOption() {
2609 reqcDlg* dlg = new reqcDlg(this);
2610 dlg->move(this->pos().x()+50, this->pos().y()+50);
2611 dlg->exec();
2612 delete dlg;
2613}
2614
2615// Enable/Disable Start and Stop Buttons
2616////////////////////////////////////////////////////////////////////////////
2617void bncWindow::enableStartStop() {
2618
2619 if ( _pppSPPComboBox && _pppSPPComboBox->currentText() == "Post-Processing" ) {
2620 if (_runningPostProcessingPPP) {
2621 _actStart->setEnabled(false);
2622 }
2623 else {
2624 _actStart->setEnabled(true);
2625 }
2626 _actStop->setEnabled(false);
2627 }
2628 else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
2629 if (_runningPostProcessingReqc) {
2630 _actStart->setEnabled(false);
2631 }
2632 else {
2633 _actStart->setEnabled(true);
2634 }
2635 _actStop->setEnabled(false);
2636 }
2637 else {
2638 if (_runningRealTime) {
2639 _actStart->setEnabled(false);
2640 _actStop->setEnabled(true);
2641 }
2642 else {
2643 _actStop->setEnabled(false);
2644 if (_mountPointsTable->rowCount() == 0) {
2645 _actStart->setEnabled(false);
2646 }
2647 else {
2648 _actStart->setEnabled(true);
2649 }
2650 }
2651 }
2652}
Note: See TracBrowser for help on using the repository browser.