source: ntrip/trunk/BNC/src/bncwindow.cpp@ 10524

Last change on this file since 10524 was 10524, checked in by stuerze, 3 months ago

replacement of obsolete qt-class members
File size: 179.6 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <QAction>
44#include <QApplication>
45#include <QCheckBox>
46#include <QCloseEvent>
47#include <QComboBox>
48#include <QDialog>
49#include <QFontDialog>
50#include <QGridLayout>
51#include <QHeaderView>
52#include <QLabel>
53#include <QLineEdit>
54#include <QMenu>
55#include <QMenuBar>
56#include <QMessageBox>
57#include <QPushButton>
58#include <QRadioButton>
59#include <QSpinBox>
60#include <QTableWidgetItem>
61#include <QTextEdit>
62#include <QToolBar>
63
64#ifndef WIN32
65#include <unistd.h>
66#else
67#include <windows.h>
68#endif
69#include "bncwindow.h"
70#include "bnccore.h"
71#include "bncgetthread.h"
72#include "bnctabledlg.h"
73#include "bncipport.h"
74#include "bncudpport.h"
75#include "bncserialport.h"
76#include "bnchlpdlg.h"
77#include "bnchtml.h"
78#include "bnctableitem.h"
79#include "bncsettings.h"
80#include "bncfigure.h"
81#include "bncfigurelate.h"
82#include "bncfigureppp.h"
83#include "bncversion.h"
84#include "bncbytescounter.h"
85#include "bncsslconfig.h"
86#include "upload/bnccustomtrafo.h"
87#include "upload/bncephuploadcaster.h"
88#include "qtfilechooser.h"
89#include "reqcdlg.h"
90#include "bncmap.h"
91#include "rinex/reqcedit.h"
92#include "rinex/reqcanalyze.h"
93#include "orbComp/sp3Comp.h"
94#ifdef QT_WEBENGINE
95# include "map/bncmapwin.h"
96#endif
97
98using namespace std;
99
100// Constructor
101////////////////////////////////////////////////////////////////////////////
102bncWindow::bncWindow() {
103
104 const static QPalette paletteWhite(QColor(255, 255, 255));
105 const static QPalette paletteGray(QColor(230, 230, 230));
106
107 _caster = 0;
108 _casterEph = 0;
109
110 _bncFigure = new bncFigure(this);
111 _bncFigureLate = new bncFigureLate(this);
112 _bncFigurePPP = new bncFigurePPP(this);
113
114 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
115 _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
116
117 connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
118 connect(BNC_CORE, SIGNAL(finishedRnxPPP()), this, SLOT(slotPostProcessingFinished()));
119
120 _runningRealTime = false;
121 _runningPPP = false;
122 _runningEdit = false;
123 _runningQC = false;
124 _runningSp3Comp = false;
125 _reqcActionComboBox = 0; // necessary for enableStartStop()
126
127 _mapWin = 0;
128
129 int ww = QFontMetrics(this->font()).horizontalAdvance('w');
130
131 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
132
133 setMinimumSize(100*ww, 70*ww);
134
135 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
136
137 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
138 this, SLOT(slotWindowMessage(QByteArray,bool)));
139
140 // Create Actions
141 // --------------
142 _actHelp = new QAction(tr("&Help Contents"),this);
143 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
144
145 _actAbout = new QAction(tr("&About BNC"),this);
146 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
147
148 _actFlowchart = new QAction(tr("&Flow Chart"),this);
149 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
150
151 _actFontSel = new QAction(tr("Select &Font"),this);
152 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
153
154 _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
155 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
156
157 _actQuit = new QAction(tr("&Quit"),this);
158 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
159
160 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
161 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
162
163 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
164 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
165 _actDeleteMountPoints->setEnabled(false);
166
167 _actMapMountPoints = new QAction(tr("&Map"),this);
168 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
169
170 _actStart = new QAction(tr("Sta&rt"),this);
171 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
172
173 _actStop = new QAction(tr("Sto&p"),this);
174 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
175 connect(_actStop, SIGNAL(triggered()), SLOT(slotMapPPPClosed()));
176
177 _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
178 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
179
180 CreateMenu();
181 AddToolbar();
182
183 bncSettings settings;
184
185 // Network Options
186 // ---------------
187 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
188 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
189
190 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
191 this, SLOT(slotBncTextChanged()));
192
193 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
194 _sslClientCertPathLineEdit = new QLineEdit(settings.value("sslClientCertPath").toString());
195 _sslIgnoreErrorsCheckBox = new QCheckBox();
196 _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
197 settings.value("sslIgnoreErrors").toInt()));
198
199 // General Options
200 // ---------------
201 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
202 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
203 _rnxAppendCheckBox = new QCheckBox();
204 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
205 settings.value("rnxAppend").toInt()));
206 _onTheFlyComboBox = new QComboBox();
207 _onTheFlyComboBox->setEditable(false);
208 _onTheFlyComboBox->addItems(QString("no,1 day,1 hour,5 min,1 min").split(","));
209 int go = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
210 if (go != -1) {
211 _onTheFlyComboBox->setCurrentIndex(go);
212 }
213 _autoStartCheckBox = new QCheckBox();
214 _autoStartCheckBox->setCheckState(Qt::CheckState(
215 settings.value("autoStart").toInt()));
216
217 // RINEX Observations Options
218 // --------------------------
219 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
220 _rnxIntrComboBox = new QComboBox();
221 _rnxIntrComboBox->setEditable(false);
222 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
223 int ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
224 if (ii != -1) {
225 _rnxIntrComboBox->setCurrentIndex(ii);
226 }
227 _rnxSamplComboBox = new QComboBox();
228 _rnxSamplComboBox->setEditable(false);
229 _rnxSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
230 int ij = _rnxSamplComboBox->findText(settings.value("rnxSampl").toString());
231 if (ij != -1) {
232 _rnxSamplComboBox->setCurrentIndex(ij);
233 }
234 _rnxFileCheckBox = new QCheckBox();
235 _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
236 _rnxSkelExtComboBox = new QComboBox();
237 _rnxSkelExtComboBox->setEditable(false);
238 _rnxSkelExtComboBox->addItems(QString("skl, SKL").split(","));
239 int ik = _rnxSkelExtComboBox->findText(settings.value("rnxSkel").toString());
240 if (ik != -1) {
241 _rnxSkelExtComboBox->setCurrentIndex(ik);
242 }
243 _rnxSkelPathLineEdit = new QLineEdit(settings.value("rnxSkelPath").toString());
244 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
245 _rnxVersComboBox = new QComboBox();
246 _rnxVersComboBox->setEditable(false);
247 _rnxVersComboBox->addItems(QString("4,3,2").split(","));
248 _rnxVersComboBox->setMaximumWidth(7*ww);
249 int il = _rnxVersComboBox->findText(settings.value("rnxVersion").toString());
250 if (il != -1) {
251 _rnxVersComboBox->setCurrentIndex(il);
252 }
253 QString hlp = settings.value("rnxV2Priority").toString();
254 if (hlp.isEmpty()) {
255 hlp = "G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:18&DPX I:ABCX S:1&C S:5&IQX";
256 }
257 _rnxV2Priority = new QLineEdit(hlp);
258
259 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)), this, SLOT(slotBncTextChanged()));
260 connect(_rnxSkelPathLineEdit, SIGNAL(textChanged(const QString &)), this, SLOT(slotBncTextChanged()));
261 connect(_rnxVersComboBox, SIGNAL(currentIndexChanged(const QString &)), this, SLOT(slotBncTextChanged()));
262
263 // RINEX Ephemeris Options
264 // -----------------------
265 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
266 _ephIntrComboBox = new QComboBox();
267 _ephIntrComboBox->setEditable(false);
268 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
269 int ji = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
270 if (ji != -1) {
271 _ephIntrComboBox->setCurrentIndex(ji);
272 }
273 _ephOutPortLineEdit = new QLineEdit(settings.value("ephOutPort").toString());
274 _ephVersComboBox = new QComboBox();
275 _ephVersComboBox->setEditable(false);
276 _ephVersComboBox->addItems(QString("4,3,2").split(","));
277 _ephVersComboBox->setMaximumWidth(7*ww);
278 int jk = _ephVersComboBox->findText(settings.value("ephVersion").toString());
279 if (jk != -1) {
280 _ephVersComboBox->setCurrentIndex(jk);
281 }
282 //_ephFilePerStation = new QCheckBox();
283 //_ephFilePerStation->setCheckState(Qt::CheckState(settings.value("ephFilePerStation").toInt()));
284
285 connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
286 this, SLOT(slotBncTextChanged()));
287
288 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
289 this, SLOT(slotBncTextChanged()));
290
291 // Broadcast Corrections Options
292 // -----------------------------
293 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
294 _corrIntrComboBox = new QComboBox();
295 _corrIntrComboBox->setEditable(false);
296 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
297 int bi = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
298 if (bi != -1) {
299 _corrIntrComboBox->setCurrentIndex(bi);
300 }
301 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
302
303 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
304 this, SLOT(slotBncTextChanged()));
305
306 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
307 this, SLOT(slotBncTextChanged()));
308
309 // Feed Engine Options
310 // -------------------
311 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
312 _outWaitSpinBox = new QSpinBox();
313 _outWaitSpinBox->setMinimum(0);
314 _outWaitSpinBox->setMaximum(30);
315 _outWaitSpinBox->setSingleStep(1);
316 _outWaitSpinBox->setSuffix(" sec");
317 _outWaitSpinBox->setValue(settings.value("outWait").toInt());
318 _outSamplComboBox = new QComboBox();
319 _outSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
320 int nn = _outSamplComboBox->findText(settings.value("outSampl").toString());
321 if (nn != -1) {
322 _outSamplComboBox->setCurrentIndex(nn);
323 }
324 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
325 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
326 _outLockTimeCheckBox = new QCheckBox();
327 _outLockTimeCheckBox->setCheckState(Qt::CheckState(settings.value("outLockTime").toInt()));
328
329 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
330 this, SLOT(slotBncTextChanged()));
331
332 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
333 this, SLOT(slotBncTextChanged()));
334
335 connect(_outLockTimeCheckBox, SIGNAL(stateChanged(int)),
336 this, SLOT(slotBncTextChanged()));
337
338 // Serial Output Options
339 // ---------------------
340 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
341 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
342 _serialBaudRateComboBox = new QComboBox();
343 _serialBaudRateComboBox->addItems(QString("110,300,600,"
344 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
345 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
346 if (kk != -1) {
347 _serialBaudRateComboBox->setCurrentIndex(kk);
348 }
349 _serialFlowControlComboBox = new QComboBox();
350 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
351 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
352 if (kk != -1) {
353 _serialFlowControlComboBox->setCurrentIndex(kk);
354 }
355 _serialDataBitsComboBox = new QComboBox();
356 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
357 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
358 if (kk != -1) {
359 _serialDataBitsComboBox->setCurrentIndex(kk);
360 }
361 _serialParityComboBox = new QComboBox();
362 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
363 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
364 if (kk != -1) {
365 _serialParityComboBox->setCurrentIndex(kk);
366 }
367 _serialStopBitsComboBox = new QComboBox();
368 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
369 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
370 if (kk != -1) {
371 _serialStopBitsComboBox->setCurrentIndex(kk);
372 }
373 _serialAutoNMEAComboBox = new QComboBox();
374 _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
375 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
376 if (kk != -1) {
377 _serialAutoNMEAComboBox->setCurrentIndex(kk);
378 }
379 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
380 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
381
382 _serialNMEASamplingSpinBox = new QSpinBox();
383 _serialNMEASamplingSpinBox->setMinimum(0);
384 _serialNMEASamplingSpinBox->setMaximum(300);
385 _serialNMEASamplingSpinBox->setSingleStep(10);
386 _serialNMEASamplingSpinBox->setValue(settings.value("serialNMEASampling").toInt());
387 _serialNMEASamplingSpinBox->setSuffix(" sec");
388
389 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
390 this, SLOT(slotBncTextChanged()));
391
392 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
393 this, SLOT(slotBncTextChanged()));
394
395 // Outages Options
396 // ---------------
397 _adviseObsRateComboBox = new QComboBox();
398 _adviseObsRateComboBox->setEditable(false);
399 _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
400 kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
401 if (kk != -1) {
402 _adviseObsRateComboBox->setCurrentIndex(kk);
403 }
404 _adviseFailSpinBox = new QSpinBox();
405 _adviseFailSpinBox->setMinimum(0);
406 _adviseFailSpinBox->setMaximum(60);
407 _adviseFailSpinBox->setSingleStep(1);
408 _adviseFailSpinBox->setSuffix(" min");
409 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
410 _adviseRecoSpinBox = new QSpinBox();
411 _adviseRecoSpinBox->setMinimum(0);
412 _adviseRecoSpinBox->setMaximum(60);
413 _adviseRecoSpinBox->setSingleStep(1);
414 _adviseRecoSpinBox->setSuffix(" min");
415 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
416 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
417
418 connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
419 this, SLOT(slotBncTextChanged()));
420
421 // Miscellaneous Options
422 // ---------------------
423 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
424 _miscPortLineEdit = new QLineEdit(settings.value("miscPort").toString());
425 _miscIntrComboBox = new QComboBox();
426 _miscIntrComboBox->setEditable(false);
427 _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
428 int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
429 if (ll != -1) {
430 _miscIntrComboBox->setCurrentIndex(ll);
431 }
432 _miscScanRTCMCheckBox = new QCheckBox();
433 _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
434 settings.value("miscScanRTCM").toInt()));
435
436 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
437 this, SLOT(slotBncTextChanged()));
438
439 // Streams
440 // -------
441 _mountPointsTable = new QTableWidget(0,9);
442
443 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
444 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
445 _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
446 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
447 _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
448 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
449 _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
450#if QT_VERSION < 0x050000
451 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
452#else
453 _mountPointsTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
454#endif
455 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
456 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
457 _mountPointsTable->setHorizontalHeaderLabels(labels);
458 _mountPointsTable->setGridStyle(Qt::NoPen);
459 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
460 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
461 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
462 _mountPointsTable->hideColumn(0);
463 _mountPointsTable->hideColumn(3);
464 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
465 SLOT(slotSelectionChanged()));
466 populateMountPointsTable();
467
468 _log = new QTextEdit();
469 _log->setReadOnly(true);
470 QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
471 _log->setFont(msFont);
472 _log->document()->setMaximumBlockCount(1000);
473
474 // Combine Corrections
475 // -------------------
476 _cmbTable = new QTableWidget(0,4);
477 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight Factor, Exclude Satellites").split(","));
478 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
479 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
480 _cmbTable->setMaximumWidth(40*ww);
481 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
482 _cmbTable->horizontalHeader()->resizeSection(1,6*ww);
483 _cmbTable->horizontalHeader()->resizeSection(2,9*ww);
484 _cmbTable->horizontalHeader()->resizeSection(3,9*ww);
485#if QT_VERSION < 0x050000
486 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
487#else
488 _cmbTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
489#endif
490 _cmbTable->horizontalHeader()->setStretchLastSection(true);
491 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
492
493 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
494 _cmbMaxdisplacementLineEdit = new QLineEdit(settings.value("cmbMaxdisplacement").toString());
495
496 _cmbSamplSpinBox = new QSpinBox;
497 _cmbSamplSpinBox->setMinimum(0);
498 _cmbSamplSpinBox->setMaximum(60);
499 _cmbSamplSpinBox->setSingleStep(5);
500 _cmbSamplSpinBox->setMaximumWidth(9*ww);
501 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
502 _cmbSamplSpinBox->setSuffix(" sec");
503
504 _cmbLogPath = new QLineEdit(settings.value("cmbLogpath").toString());
505
506 QPushButton* addCmbRowButton = new QPushButton("Add Row");
507 QPushButton* delCmbRowButton = new QPushButton("Delete");
508
509 connect(_cmbTable, SIGNAL(itemSelectionChanged()), SLOT(slotBncTextChanged()));
510
511 _cmbMethodComboBox = new QComboBox();
512 _cmbMethodComboBox->setEditable(false);
513 _cmbMethodComboBox->addItems(QString("Kalman Filter,Single-Epoch").split(","));
514 int cm = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
515 if (cm != -1) {
516 _cmbMethodComboBox->setCurrentIndex(cm);
517 }
518
519 int iRow = _cmbTable->rowCount();
520 if (iRow > 0) {
521 enableWidget(true, _cmbMethodComboBox);
522 enableWidget(true, _cmbMaxresLineEdit);
523 enableWidget(true, _cmbMaxdisplacementLineEdit);
524 enableWidget(true, _cmbSamplSpinBox);
525 enableWidget(true, _cmbLogPath);
526 }
527 else {
528 enableWidget(false, _cmbMethodComboBox);
529 enableWidget(false, _cmbMaxresLineEdit);
530 enableWidget(false, _cmbMaxdisplacementLineEdit);
531 enableWidget(false, _cmbSamplSpinBox);
532 enableWidget(false, _cmbLogPath);
533 }
534 _cmbGpsCheckBox = new QCheckBox();
535 _cmbGpsCheckBox->setCheckState(Qt::CheckState(settings.value("cmbGps").toInt()));
536 _cmbGloCheckBox = new QCheckBox();
537 _cmbGloCheckBox->setCheckState(Qt::CheckState(settings.value("cmbGlo").toInt()));
538 _cmbGalCheckBox = new QCheckBox();
539 _cmbGalCheckBox->setCheckState(Qt::CheckState(settings.value("cmbGal").toInt()));
540 _cmbBdsCheckBox = new QCheckBox();
541 _cmbBdsCheckBox->setCheckState(Qt::CheckState(settings.value("cmbBds").toInt()));
542 _cmbQzssCheckBox = new QCheckBox();
543 _cmbQzssCheckBox->setCheckState(Qt::CheckState(settings.value("cmbQzss").toInt()));
544 _cmbSbasCheckBox = new QCheckBox();
545 _cmbSbasCheckBox->setCheckState(Qt::CheckState(settings.value("cmbSbas").toInt()));
546 _cmbIrnssCheckBox = new QCheckBox();
547 _cmbIrnssCheckBox->setCheckState(Qt::CheckState(settings.value("cmbIrnss").toInt()));
548
549 connect(_cmbGpsCheckBox, SIGNAL(stateChanged(int)), this, SLOT(slotBncTextChanged()));
550 connect(_cmbGloCheckBox, SIGNAL(stateChanged(int)), this, SLOT(slotBncTextChanged()));
551 connect(_cmbGalCheckBox, SIGNAL(stateChanged(int)), this, SLOT(slotBncTextChanged()));
552 connect(_cmbBdsCheckBox, SIGNAL(stateChanged(int)), this, SLOT(slotBncTextChanged()));
553 connect(_cmbQzssCheckBox, SIGNAL(stateChanged(int)), this, SLOT(slotBncTextChanged()));
554 connect(_cmbSbasCheckBox, SIGNAL(stateChanged(int)), this, SLOT(slotBncTextChanged()));
555 connect(_cmbIrnssCheckBox, SIGNAL(stateChanged(int)), this, SLOT(slotBncTextChanged()));
556
557 _cmbBsxFile = new qtFileChooser(0, qtFileChooser::File);
558 _cmbBsxFile->setFileName(settings.value("cmbBsxFile").toString());
559
560 // Upload Results
561 // -------------
562 _uploadTable = new QTableWidget(0,16);
563 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Ntrip, User, Password, System, Format, CoM, SP3 File, RNX File, BSX File, PID, SID, IOD, bytes").split(","));
564 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
565 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
566 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
567 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
568 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
569 _uploadTable->horizontalHeader()->resizeSection( 3, 6*ww);
570 _uploadTable->horizontalHeader()->resizeSection( 4, 8*ww);
571 _uploadTable->horizontalHeader()->resizeSection( 5, 8*ww);
572 _uploadTable->horizontalHeader()->resizeSection( 6,11*ww);
573 _uploadTable->horizontalHeader()->resizeSection( 7,11*ww);
574 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
575 _uploadTable->horizontalHeader()->resizeSection( 9,15*ww);
576 _uploadTable->horizontalHeader()->resizeSection(10,15*ww);
577 _uploadTable->horizontalHeader()->resizeSection(11,15*ww);
578 _uploadTable->horizontalHeader()->resizeSection(12, 4*ww);
579 _uploadTable->horizontalHeader()->resizeSection(13, 4*ww);
580 _uploadTable->horizontalHeader()->resizeSection(14, 4*ww);
581 _uploadTable->horizontalHeader()->resizeSection(15,12*ww);
582#if QT_VERSION < 0x050000
583 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
584#else
585 _uploadTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
586#endif
587 _uploadTable->horizontalHeader()->setStretchLastSection(true);
588 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
589
590 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
591 SLOT(slotBncTextChanged()));
592
593 QPushButton* addUploadRowButton = new QPushButton("Add Row");
594 QPushButton* delUploadRowButton = new QPushButton("Del Row");
595 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
596 _uploadIntrComboBox = new QComboBox;
597 _uploadIntrComboBox->setEditable(false);
598 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
599 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
600 if (ii != -1) {
601 _uploadIntrComboBox->setCurrentIndex(ii);
602 }
603
604 _uploadAntexFile = new qtFileChooser(0, qtFileChooser::File);
605 _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
606
607 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
608 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
609 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
610 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
611 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
612 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
613 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
614
615 _uploadSamplSp3ComboBox = new QComboBox();
616 _uploadSamplSp3ComboBox->addItems(QString("0 sec,30 sec,60 sec,300 sec,900 sec").split(","));
617 int oo = _uploadSamplSp3ComboBox->findText(settings.value("uploadSamplSp3").toString());
618 if (oo != -1) {
619 _uploadSamplSp3ComboBox->setCurrentIndex(oo);
620 }
621
622 _uploadSamplClkRnxSpinBox = new QSpinBox;
623 _uploadSamplClkRnxSpinBox->setMinimum(0);
624 _uploadSamplClkRnxSpinBox->setMaximum(60);
625 _uploadSamplClkRnxSpinBox->setSingleStep(5);
626 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
627 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
628 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
629
630 _uploadSamplBiaSnxSpinBox = new QSpinBox;
631 _uploadSamplBiaSnxSpinBox->setMinimum(0);
632 _uploadSamplBiaSnxSpinBox->setMaximum(60);
633 _uploadSamplBiaSnxSpinBox->setSingleStep(5);
634 _uploadSamplBiaSnxSpinBox->setMaximumWidth(9*ww);
635 _uploadSamplBiaSnxSpinBox->setValue(settings.value("uploadSamplBiaSnx").toInt());
636 _uploadSamplBiaSnxSpinBox->setSuffix(" sec");
637
638 int iRowT = _uploadTable->rowCount();
639 if (iRowT > 0) {
640 enableWidget(true, _uploadIntrComboBox);
641 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
642 enableWidget(true, _uploadSamplSp3ComboBox);
643 enableWidget(true, _uploadSamplClkRnxSpinBox);
644 enableWidget(true, _uploadSamplBiaSnxSpinBox);
645 enableWidget(true, _uploadAntexFile);
646 }
647 else {
648 enableWidget(false, _uploadIntrComboBox);
649 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
650 enableWidget(false, _uploadSamplSp3ComboBox);
651 enableWidget(false, _uploadSamplClkRnxSpinBox);
652 enableWidget(true, _uploadSamplBiaSnxSpinBox);
653 enableWidget(false, _uploadAntexFile);
654 }
655
656 // Upload RTCM3 Ephemeris
657 // ----------------------
658 _uploadEphTable = new QTableWidget(0,6);
659 _uploadEphTable->setColumnCount(8);
660 _uploadEphTable->setRowCount(0);
661 _uploadEphTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Ntrip, User, Password, System, bytes").split(","));
662 _uploadEphTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
663 _uploadEphTable->setSelectionBehavior(QAbstractItemView::SelectRows);
664 _uploadEphTable->horizontalHeader()->resizeSection( 0,13*ww);
665 _uploadEphTable->horizontalHeader()->resizeSection( 1, 5*ww);
666 _uploadEphTable->horizontalHeader()->resizeSection( 2, 8*ww);
667 _uploadEphTable->horizontalHeader()->resizeSection( 3, 6*ww);
668 _uploadEphTable->horizontalHeader()->resizeSection( 4, 8*ww);
669 _uploadEphTable->horizontalHeader()->resizeSection( 3, 8*ww);
670 _uploadEphTable->horizontalHeader()->resizeSection( 5,10*ww);
671 _uploadEphTable->horizontalHeader()->resizeSection( 6,12*ww);
672#if QT_VERSION < 0x050000
673 _uploadEphTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
674#else
675 _uploadEphTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Interactive);
676#endif
677 _uploadEphTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
678
679 connect(_uploadEphTable, SIGNAL(itemSelectionChanged()),
680 SLOT(slotBncTextChanged()));
681
682 QPushButton* addUploadEphRowButton = new QPushButton("Add Row");
683 addUploadEphRowButton->setMaximumWidth(9*ww);
684 QPushButton* delUploadEphRowButton = new QPushButton("Del Row");
685 delUploadEphRowButton->setMaximumWidth(9*ww);
686
687 _uploadSamplRtcmEphSpinBox = new QSpinBox;
688 _uploadSamplRtcmEphSpinBox->setMinimum(0);
689 _uploadSamplRtcmEphSpinBox->setMaximum(60);
690 _uploadSamplRtcmEphSpinBox->setSingleStep(5);
691 _uploadSamplRtcmEphSpinBox->setMaximumWidth(9*ww);
692 _uploadSamplRtcmEphSpinBox->setValue(settings.value("uploadSamplRtcmEph").toInt());
693 _uploadSamplRtcmEphSpinBox->setSuffix(" sec");
694
695 iRowT = _uploadEphTable->rowCount();
696 if (iRowT > 0) {
697 enableWidget(true, _uploadSamplRtcmEphSpinBox);
698 }
699 else {
700 enableWidget(false, _uploadSamplRtcmEphSpinBox);
701 }
702
703 // Canvas with Editable Fields
704 // ---------------------------
705 _canvas = new QWidget;
706 setCentralWidget(_canvas);
707
708 _aogroup = new QTabWidget();
709 _aogroup->setElideMode(Qt::ElideNone);
710 _aogroup->setUsesScrollButtons(true);
711 QWidget* pgroup = new QWidget();
712 QWidget* ggroup = new QWidget();
713 QWidget* sgroup = new QWidget();
714 QWidget* egroup = new QWidget();
715 QWidget* agroup = new QWidget();
716 QWidget* cgroup = new QWidget();
717 QWidget* ogroup = new QWidget();
718 QWidget* rgroup = new QWidget();
719 QWidget* sergroup = new QWidget();
720 QWidget* pppGroup1 = new QWidget();
721 QWidget* pppGroup2 = new QWidget();
722 QWidget* pppGroup3 = new QWidget();
723 QWidget* pppGroup4 = new QWidget();
724 QWidget* reqcgroup = new QWidget();
725 QWidget* sp3CompGroup = new QWidget();
726 QWidget* cmbgroup = new QWidget();
727 QWidget* uploadgroup = new QWidget();
728 QWidget* uploadEphgroup = new QWidget();
729 _aogroup->addTab(pgroup,tr("Network"));
730 _aogroup->addTab(ggroup,tr("General"));
731 _aogroup->addTab(ogroup,tr("RINEX Observations"));
732 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
733 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
734 _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
735 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
736 _aogroup->addTab(sgroup,tr("Feed Engine"));
737 _aogroup->addTab(sergroup,tr("Serial Output"));
738 _aogroup->addTab(agroup,tr("Outages"));
739 _aogroup->addTab(rgroup,tr("Miscellaneous"));
740 _aogroup->addTab(pppGroup1,tr("PPP (1)"));
741 _aogroup->addTab(pppGroup2,tr("PPP (2)"));
742 _aogroup->addTab(pppGroup3,tr("PPP (3)"));
743 _aogroup->addTab(pppGroup4,tr("PPP (4)"));
744 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
745 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
746 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
747
748 // Log Tab
749 // -------
750 _loggroup = new QTabWidget();
751 _loggroup->addTab(_log,tr("Log"));
752 _loggroup->addTab(_bncFigure,tr("Throughput"));
753 _loggroup->addTab(_bncFigureLate,tr("Latency"));
754 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
755
756 // Netowork (Proxy and SSL) Tab
757 // ----------------------------
758 QGridLayout* pLayout = new QGridLayout;
759 pLayout->setColumnMinimumWidth(0,13*ww);
760 _proxyPortLineEdit->setMaximumWidth(9*ww);
761
762 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
763 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
764 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
765 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
766 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
767 pLayout->addWidget(new QLabel("Path to SSL certificates"), 3, 0);
768 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
769 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
770 pLayout->addWidget(new QLabel("Path to SSL client certificates"), 4, 0);
771 pLayout->addWidget(_sslClientCertPathLineEdit, 4, 1, 1,10);
772 pLayout->addWidget(new QLabel("Ignore SSL authorization errors"), 5, 0);
773 pLayout->addWidget(_sslIgnoreErrorsCheckBox, 5, 1, 1,10);
774 pLayout->addWidget(new QLabel(""), 6, 1);
775 pLayout->setRowStretch(6, 999);
776
777 pgroup->setLayout(pLayout);
778
779 // General Tab
780 // -----------
781 QGridLayout* gLayout = new QGridLayout;
782 gLayout->setColumnMinimumWidth(0,14*ww);
783 _onTheFlyComboBox->setMaximumWidth(9*ww);
784
785 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
786 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
787 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,20);
788 gLayout->addWidget(new QLabel("Append files"), 2, 0);
789 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
790 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
791 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
792 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
793 gLayout->addWidget(_autoStartCheckBox, 4, 1);
794 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
795 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,20);
796 gLayout->addWidget(new QLabel(""), 6, 1);
797 gLayout->setRowStretch(7, 999);
798
799 ggroup->setLayout(gLayout);
800
801 // RINEX Observations
802 // ------------------
803 QGridLayout* oLayout = new QGridLayout;
804 oLayout->setColumnMinimumWidth(0,14*ww);
805 _rnxIntrComboBox->setMaximumWidth(9*ww);
806 _rnxSamplComboBox->setMaximumWidth(9*ww);
807 _rnxSkelExtComboBox->setMaximumWidth(9*ww);
808
809 oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
810 oLayout->addWidget(new QLabel("Directory"), 1, 0);
811 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1, 15);
812 oLayout->addWidget(new QLabel("Interval"), 2, 0);
813 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
814 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
815 oLayout->addWidget(_rnxSamplComboBox, 2, 3, Qt::AlignRight);
816 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
817 oLayout->addWidget(_rnxSkelExtComboBox, 3, 1, Qt::AlignLeft);
818 oLayout->addWidget(new QLabel("Skeleton mandatory"), 3, 2, Qt::AlignRight);
819 oLayout->addWidget(_rnxFileCheckBox, 3, 3);
820 oLayout->addWidget(new QLabel("Skeleton Directory"), 4, 0);
821 oLayout->addWidget(_rnxSkelPathLineEdit, 4, 1, 1, 15);
822 oLayout->addWidget(new QLabel("Script (full path)"), 5, 0);
823 oLayout->addWidget(_rnxScrpLineEdit, 5, 1, 1, 15);
824 oLayout->addWidget(new QLabel("Version"), 6, 0);
825 oLayout->addWidget(_rnxVersComboBox, 6, 1);
826 oLayout->addWidget(new QLabel("Signal priority"), 6, 2, Qt::AlignRight);
827 oLayout->addWidget(_rnxV2Priority, 6, 3, 1, 13);
828 oLayout->addWidget(new QLabel(""), 7, 1);
829 oLayout->setRowStretch(8, 999);
830
831 ogroup->setLayout(oLayout);
832
833 // RINEX Ephemeris
834 // ---------------
835 QGridLayout* eLayout = new QGridLayout;
836 eLayout->setColumnMinimumWidth(0,14*ww);
837 _ephIntrComboBox->setMaximumWidth(9*ww);
838 _ephOutPortLineEdit->setMaximumWidth(9*ww);
839
840 eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
841 eLayout->addWidget(new QLabel("Directory"), 1, 0);
842 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
843 eLayout->addWidget(new QLabel("Interval"), 2, 0);
844 eLayout->addWidget(_ephIntrComboBox, 2, 1);
845 eLayout->addWidget(new QLabel("Port"), 3, 0);
846 eLayout->addWidget(_ephOutPortLineEdit, 3, 1);
847 eLayout->addWidget(new QLabel("Version"), 4, 0);
848 eLayout->addWidget(_ephVersComboBox, 4, 1);
849 eLayout->setRowStretch(5, 999);
850 //eLayout->addWidget(new QLabel("File per Station"), 5, 0);
851 //eLayout->addWidget(_ephFilePerStation, 5, 1);
852 //eLayout->setRowStretch(6, 999);
853
854 egroup->setLayout(eLayout);
855
856
857 // Broadcast Corrections
858 // ---------------------
859 QGridLayout* cLayout = new QGridLayout;
860 cLayout->setColumnMinimumWidth(0,14*ww);
861 _corrIntrComboBox->setMaximumWidth(9*ww);
862 _corrPortLineEdit->setMaximumWidth(9*ww);
863
864 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
865 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
866 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,30);
867 cLayout->addWidget(new QLabel("Interval"), 2, 0);
868 cLayout->addWidget(_corrIntrComboBox, 2, 1);
869 cLayout->addWidget(new QLabel("Port"), 3, 0);
870 cLayout->addWidget(_corrPortLineEdit, 3, 1);
871 cLayout->addWidget(new QLabel(""), 4, 1);
872 cLayout->setRowStretch(7, 999);
873 cgroup->setLayout(cLayout);
874
875 // Feed Engine
876 // -----------
877 QGridLayout* sLayout = new QGridLayout;
878 sLayout->setColumnMinimumWidth(0,14*ww);
879 _outPortLineEdit->setMaximumWidth(9*ww);
880 _outWaitSpinBox->setMaximumWidth(9*ww);
881 _outSamplComboBox->setMaximumWidth(9*ww);
882 _outUPortLineEdit->setMaximumWidth(9*ww);
883
884 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
885 sLayout->addWidget(new QLabel("Port"), 1, 0);
886 sLayout->addWidget(_outPortLineEdit, 1, 1);
887 sLayout->addWidget(new QLabel(" Wait for full obs epoch"), 1, 2, Qt::AlignRight);
888 sLayout->addWidget(_outWaitSpinBox, 1, 3, Qt::AlignLeft);
889 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
890 sLayout->addWidget(_outSamplComboBox, 2, 1, Qt::AlignLeft);
891 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
892 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 10);
893 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
894 sLayout->addWidget(_outUPortLineEdit, 4, 1);
895 sLayout->addWidget(new QLabel("Print lock time"), 5, 0);
896 sLayout->addWidget(_outLockTimeCheckBox, 5, 1);
897 sLayout->addWidget(new QLabel(""), 6, 1);
898 sLayout->setRowStretch(7, 999);
899
900 sgroup->setLayout(sLayout);
901
902 // Serial Output
903 // -------------
904 QGridLayout* serLayout = new QGridLayout;
905 serLayout->setColumnMinimumWidth(0,12*ww);
906 _serialBaudRateComboBox->setMaximumWidth(9*ww);
907 _serialFlowControlComboBox->setMaximumWidth(11*ww);
908 _serialDataBitsComboBox->setMaximumWidth(5*ww);
909 _serialParityComboBox->setMaximumWidth(9*ww);
910 _serialStopBitsComboBox->setMaximumWidth(5*ww);
911 _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
912 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
913 _serialNMEASamplingSpinBox->setMaximumWidth(8*ww);
914
915 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
916 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
917 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
918 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
919 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
920 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
921 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
922 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
923 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
924 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
925 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
926 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
927 serLayout->addWidget(_serialParityComboBox, 4, 3);
928 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
929 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
930 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
931 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
932 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
933 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,10);
934 serLayout->addWidget(new QLabel("Height"), 5,14, Qt::AlignRight);
935 serLayout->addWidget(_serialHeightNMEALineEdit, 5,15, 1,11);
936 serLayout->addWidget(new QLabel("Sampling"), 5,25, Qt::AlignRight);
937 serLayout->addWidget(_serialNMEASamplingSpinBox, 5,26, 1,12);
938 serLayout->addWidget(new QLabel(""), 6, 1);
939 serLayout->setRowStretch(7, 999);
940
941 sergroup->setLayout(serLayout);
942
943 // Outages
944 // -------
945 QGridLayout* aLayout = new QGridLayout;
946 aLayout->setColumnMinimumWidth(0,14*ww);
947 _adviseObsRateComboBox->setMaximumWidth(9*ww);
948 _adviseFailSpinBox->setMaximumWidth(9*ww);
949 _adviseRecoSpinBox->setMaximumWidth(9*ww);
950
951 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
952 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
953 aLayout->addWidget(_adviseObsRateComboBox, 1, 1);
954 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
955 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
956 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
957 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
958 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
959 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,20);
960 aLayout->addWidget(new QLabel(""), 5, 1);
961 aLayout->setRowStretch(6, 999);
962
963 agroup->setLayout(aLayout);
964
965 // Miscellaneous
966 // -------------
967 QGridLayout* rLayout = new QGridLayout;
968 rLayout->setColumnMinimumWidth(0,14*ww);
969 _miscIntrComboBox->setMaximumWidth(9*ww);
970 _miscPortLineEdit->setMaximumWidth(9*ww);
971
972 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
973 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
974 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1, 7);
975 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
976 rLayout->addWidget(_miscIntrComboBox, 2, 1);
977 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
978 rLayout->addWidget(_miscScanRTCMCheckBox, 3, 1);
979 rLayout->addWidget(new QLabel("Port"), 4, 0);
980 rLayout->addWidget(_miscPortLineEdit, 4, 1);
981 rLayout->addWidget(new QLabel(""), 5, 1);
982 rLayout->setRowStretch(6, 999);
983
984 rgroup->setLayout(rLayout);
985
986 // PPP
987 // ---
988 _pppWidgets._dataSource->setMaximumWidth(15*ww);
989 _pppWidgets._corrMount->setMaximumWidth(15*ww);
990 _pppWidgets._nmeaPath->setMaximumWidth(35*ww);
991 _pppWidgets._logPath->setMaximumWidth(35*ww);
992 _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
993 _pppWidgets._snxtroIntr->setMaximumWidth(7*ww);
994 _pppWidgets._snxtroAc->setMaximumWidth(7*ww);
995 _pppWidgets._snxtroSolId->setMaximumWidth(7*ww);
996 _pppWidgets._snxtroSolType->setMaximumWidth(7*ww);
997 _pppWidgets._snxtroCampId->setMaximumWidth(7*ww);
998 _pppWidgets._ionoMount->setMaximumWidth(15*ww);
999
1000
1001 QGridLayout* pppLayout1 = new QGridLayout();
1002 int ir = 0;
1003 pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output.<br>"), ir, 0, 1, 7, Qt::AlignLeft);
1004 ++ir;
1005 pppLayout1->addWidget(new QLabel("Data source"), ir, 0);
1006 pppLayout1->addWidget(_pppWidgets._dataSource, ir, 1);
1007 pppLayout1->addWidget(new QLabel(" Logfile directory"), ir, 4);
1008 pppLayout1->addWidget(_pppWidgets._logPath, ir, 5, 1, 3);
1009 ++ir;
1010 pppLayout1->addWidget(new QLabel("Corrections stream"), ir, 0);
1011 pppLayout1->addWidget(_pppWidgets._corrMount, ir, 1);
1012 pppLayout1->addWidget(new QLabel("Corrections file"), ir, 2);
1013 pppLayout1->addWidget(_pppWidgets._corrFile, ir, 3);
1014 pppLayout1->addWidget(new QLabel(" NMEA directory"), ir, 4);
1015 pppLayout1->addWidget(_pppWidgets._nmeaPath, ir, 5, 1, 3);
1016 ++ir;
1017#ifdef USE_PPP
1018 pppLayout1->addWidget(new QLabel("Ionosphere stream"), ir, 0);
1019 pppLayout1->addWidget(_pppWidgets._ionoMount, ir, 1);
1020 pppLayout1->addWidget(new QLabel("Ionosphere file"), ir, 2);
1021 pppLayout1->addWidget(_pppWidgets._ionoFile, ir, 3);
1022#endif
1023 pppLayout1->addWidget(new QLabel(" SNX TRO directory"), ir, 4);
1024 pppLayout1->addWidget(_pppWidgets._snxtroPath, ir, 5, 1, 3);
1025 ++ir;
1026 pppLayout1->addWidget(new QLabel("RINEX Obs file"), ir, 0);
1027 pppLayout1->addWidget(_pppWidgets._rinexObs, ir, 1);
1028 pppLayout1->addWidget(new QLabel("RINEX Nav file"), ir, 2);
1029 pppLayout1->addWidget(_pppWidgets._rinexNav, ir, 3);
1030 pppLayout1->addWidget(new QLabel(" SNX TRO interval"), ir, 4);
1031 pppLayout1->addWidget(_pppWidgets._snxtroIntr, ir, 5);
1032 pppLayout1->addWidget(new QLabel(" SNX TRO sampling"), ir, 6);
1033 pppLayout1->addWidget(_pppWidgets._snxtroSampl, ir, 7, Qt::AlignRight);
1034 ++ir;
1035 pppLayout1->addWidget(new QLabel("ANTEX file"), ir, 0);
1036 pppLayout1->addWidget(_pppWidgets._antexFile, ir, 1);
1037 pppLayout1->addWidget(new QLabel("Coordinates file"), ir, 2);
1038 pppLayout1->addWidget(_pppWidgets._crdFile, ir, 3);
1039 pppLayout1->addWidget(new QLabel(" SNX TRO AC"), ir, 4);
1040 pppLayout1->addWidget(_pppWidgets._snxtroAc, ir, 5);
1041 pppLayout1->addWidget(new QLabel(" SNX TRO solution ID"),ir, 6);
1042 pppLayout1->addWidget(_pppWidgets._snxtroSolId, ir, 7, Qt::AlignRight);
1043 ++ir;
1044#ifdef USE_PPP
1045 pppLayout1->addWidget(new QLabel("BLQ file"), ir, 0);
1046 pppLayout1->addWidget(_pppWidgets._blqFile, ir, 1);
1047 pppLayout1->addWidget(new QLabel(" SNX TRO campaign ID"), ir, 4);
1048 pppLayout1->addWidget(_pppWidgets._snxtroCampId, ir, 5);
1049 pppLayout1->addWidget(new QLabel(" SNX TRO solution type"),ir, 6);
1050 pppLayout1->addWidget(_pppWidgets._snxtroSolType, ir, 7, Qt::AlignRight);
1051#endif
1052 pppLayout1->setRowStretch(ir+1, 999);
1053 pppGroup1->setLayout(pppLayout1);
1054
1055 QGridLayout* pppLayout2 = new QGridLayout();
1056 ir = 0;
1057 pppLayout2->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
1058 ++ir;
1059 pppLayout2->addWidget(new QLabel("GPS LCs"), ir, 0, Qt::AlignLeft);
1060 pppLayout2->addWidget(_pppWidgets._lcGPS, ir, 1);
1061 pppLayout2->addItem(new QSpacerItem(8*ww, 0), ir, 2);
1062 pppLayout2->addWidget(new QLabel("Sigma C1"), ir, 3, Qt::AlignLeft);
1063 pppLayout2->addWidget(_pppWidgets._sigmaC1, ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
1064 pppLayout2->addItem(new QSpacerItem(8*ww, 0), ir, 5);
1065 pppLayout2->addWidget(new QLabel("Sigma L1"), ir, 6, Qt::AlignLeft);
1066 pppLayout2->addWidget(_pppWidgets._sigmaL1, ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
1067 ++ir;
1068 pppLayout2->addWidget(new QLabel("GLONASS LCs"), ir, 0, Qt::AlignLeft);
1069 pppLayout2->addWidget(_pppWidgets._lcGLONASS, ir, 1);
1070 pppLayout2->addWidget(new QLabel("Max Res C1"), ir, 3, Qt::AlignLeft);
1071 pppLayout2->addWidget(_pppWidgets._maxResC1, ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
1072 pppLayout2->addWidget(new QLabel("Max Res L1"), ir, 6, Qt::AlignLeft);
1073 pppLayout2->addWidget(_pppWidgets._maxResL1, ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
1074 ++ir;
1075 pppLayout2->addWidget(new QLabel("Galileo LCs"), ir, 0, Qt::AlignLeft);
1076 pppLayout2->addWidget(_pppWidgets._lcGalileo, ir, 1);
1077 pppLayout2->addWidget(new QLabel("Ele Wgt Code"), ir, 3, Qt::AlignLeft);
1078 pppLayout2->addWidget(_pppWidgets._eleWgtCode, ir, 4);
1079 pppLayout2->addWidget(new QLabel("Ele Wgt Phase"), ir, 6, Qt::AlignLeft);
1080 pppLayout2->addWidget(_pppWidgets._eleWgtPhase, ir, 7);
1081 ++ir;
1082 pppLayout2->addWidget(new QLabel("BDS LCs"), ir, 0, Qt::AlignLeft);
1083 pppLayout2->addWidget(_pppWidgets._lcBDS, ir, 1);
1084 pppLayout2->addWidget(new QLabel("Min # of Obs"), ir, 3, Qt::AlignLeft);
1085 pppLayout2->addWidget(_pppWidgets._minObs, ir, 4);
1086 pppLayout2->addWidget(new QLabel("Min Elevation"), ir, 6, Qt::AlignLeft);
1087 pppLayout2->addWidget(_pppWidgets._minEle, ir, 7);_pppWidgets._minEle->setMaximumWidth(8*ww);
1088 ++ir;
1089#ifdef USE_PPP
1090 pppLayout2->addWidget(new QLabel("Constraints"), ir, 0, Qt::AlignLeft);
1091 pppLayout2->addWidget(_pppWidgets._constraints, ir, 1);
1092 pppLayout2->addWidget(new QLabel("Sigma GIM"), ir, 3, Qt::AlignLeft);
1093 pppLayout2->addWidget(_pppWidgets._sigmaGIM, ir, 4); _pppWidgets._sigmaGIM->setMaximumWidth(8*ww);
1094#endif
1095 pppLayout2->addItem(new QSpacerItem(8*ww, 0), ir, 5);
1096 pppLayout2->addWidget(new QLabel("Wait for clock corr."), ir, 6, Qt::AlignLeft);
1097 pppLayout2->addWidget(_pppWidgets._corrWaitTime, ir, 7);
1098 ++ir;
1099 pppLayout2->addItem(new QSpacerItem(8*ww, 0), ir, 2);
1100#ifdef USE_PPP
1101 pppLayout2->addWidget(new QLabel("Max Res GIM"), ir, 3, Qt::AlignLeft);
1102 pppLayout2->addWidget(_pppWidgets._maxResGIM, ir, 4); _pppWidgets._maxResGIM->setMaximumWidth(8*ww);
1103#endif
1104 pppLayout2->addWidget(new QLabel("Seeding (sec)"), ir, 6, Qt::AlignLeft);
1105 pppLayout2->addWidget(_pppWidgets._seedingTime, ir, 7);_pppWidgets._seedingTime->setMaximumWidth(8*ww);
1106 ++ir;
1107 pppLayout2->addWidget(new QLabel(""), ir, 8);
1108 pppLayout2->setColumnStretch(8, 999);
1109 ++ir;
1110 pppLayout2->addWidget(new QLabel(""), ir, 1);
1111 pppLayout2->setRowStretch(ir, 999);
1112
1113 pppGroup2->setLayout(pppLayout2);
1114
1115 QVBoxLayout* pppLayout3 = new QVBoxLayout();
1116 pppLayout3->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
1117 pppLayout3->addWidget(_pppWidgets._staTable, 99);
1118 QHBoxLayout* pppLayout3sub = new QHBoxLayout();
1119 pppLayout3sub->addWidget(_pppWidgets._addStaButton);
1120 pppLayout3sub->addWidget(_pppWidgets._delStaButton);
1121 pppLayout3sub->addStretch(99);
1122
1123 pppLayout3->addLayout(pppLayout3sub);
1124
1125 pppGroup3->setLayout(pppLayout3);
1126
1127 // ------------------------
1128 connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1129 _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
1130 _pppWidgets._audioResponse->setMaximumWidth(8*ww);
1131
1132 QGridLayout* pppLayout4 = new QGridLayout();
1133 ir = 0;
1134 pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
1135 ++ir;
1136 pppLayout4->addWidget(new QLabel("PPP Plot"), ir, 0, Qt::AlignLeft);
1137 pppLayout4->addWidget(_pppWidgets._plotCoordinates, ir, 1, Qt::AlignLeft);
1138 pppLayout4->addWidget(new QLabel("Mountpoint"), ir, 2, 1, 10, Qt::AlignLeft);
1139 pppLayout4->addWidget(_pppWidgets._audioResponse, ir, 4, Qt::AlignLeft);
1140 pppLayout4->addWidget(new QLabel("Audio response"), ir, 5, Qt::AlignRight);
1141 ++ir;
1142 pppLayout4->addWidget(new QLabel("Track map"), ir, 0, Qt::AlignLeft);
1143 pppLayout4->addWidget(_pppWidgets._mapWinButton, ir, 1, Qt::AlignLeft);
1144 ++ir;
1145 pppLayout4->addWidget(new QLabel("Dot-properties"), ir, 0, Qt::AlignLeft);
1146 pppLayout4->addWidget(_pppWidgets._mapWinDotSize, ir, 1, Qt::AlignLeft);
1147 pppLayout4->addWidget(new QLabel("Size "), ir, 2, Qt::AlignLeft);
1148 pppLayout4->addWidget(_pppWidgets._mapWinDotColor, ir, 3, Qt::AlignLeft);
1149 pppLayout4->addWidget(new QLabel("Color"), ir, 4, Qt::AlignLeft);
1150 ++ir;
1151 pppLayout4->addWidget(new QLabel("Post-processing speed"), ir, 0, Qt::AlignLeft);
1152 pppLayout4->addWidget(_pppWidgets._mapSpeedSlider, ir, 1, 1, 20, Qt::AlignLeft);
1153 ++ir;
1154 pppLayout4->addWidget(new QLabel(""), ir, 1);
1155 pppLayout4->setRowStretch(ir, 999);
1156
1157 pppGroup4->setLayout(pppLayout4);
1158
1159 // Reqc Processing
1160 // ---------------
1161 _reqcActionComboBox = new QComboBox();
1162 _reqcActionComboBox->setEditable(false);
1163 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1164 int ip = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1165 if (ip != -1) {
1166 _reqcActionComboBox->setCurrentIndex(ip);
1167 }
1168 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1169 this, SLOT(slotBncTextChanged()));
1170
1171 QGridLayout* reqcLayout = new QGridLayout;
1172 _reqcActionComboBox->setMinimumWidth(15*ww);
1173 _reqcActionComboBox->setMaximumWidth(20*ww);
1174
1175 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1176 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1177
1178 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1179 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1180 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1181 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1182 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1183 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1184 _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1185
1186 connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1187 this, SLOT(slotBncTextChanged()));
1188
1189 _reqcLogSummaryOnly = new QCheckBox();
1190 _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1191
1192 ir = 0;
1193 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1194 ++ir;
1195 reqcLayout->addWidget(new QLabel("Action"), ir, 0);
1196 reqcLayout->addWidget(_reqcActionComboBox, ir, 1);
1197 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1198 _reqcEditOptionButton->setMinimumWidth(15*ww);
1199 _reqcEditOptionButton->setMaximumWidth(20*ww);
1200
1201 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3);
1202 ++ir;
1203 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0);
1204 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1);
1205 _reqcObsFileChooser->setMaximumWidth(40*ww);
1206 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1207 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3);
1208 _reqcNavFileChooser->setMaximumWidth(40*ww);
1209 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1210 ++ir;
1211 reqcLayout->addWidget(new QLabel("Output file (full path)"), ir, 0);
1212 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1);
1213 _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1214 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1215 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3);
1216 _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1217 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1218 ++ir;
1219 reqcLayout->addWidget(new QLabel("Logfile"), ir, 0);
1220 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1);
1221 _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1222 reqcLayout->addWidget(new QLabel(" Summary only"), ir, 2);
1223 reqcLayout->addWidget(_reqcLogSummaryOnly, ir, 3);
1224 ++ir;
1225 reqcLayout->addWidget(new QLabel("Plots for signals"), ir, 0);
1226 reqcLayout->addWidget(_reqcSkyPlotSignals, ir, 1);
1227 _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1228 ++ir;
1229 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0);
1230 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1);
1231 _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1232 ++ir;
1233 reqcLayout->setRowStretch(ir, 999);
1234
1235 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1236 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1237
1238 reqcgroup->setLayout(reqcLayout);
1239
1240 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1241 this, SLOT(slotReqcEditOption()));
1242
1243 QGridLayout* sp3CompLayout = new QGridLayout;
1244
1245 _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1246 _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1247 _sp3CompFileChooser->setMinimumWidth(15*ww);
1248 _sp3CompFileChooser->setMaximumWidth(40*ww);
1249
1250 _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1251 _sp3CompExclude->setMinimumWidth(18*ww);
1252 _sp3CompExclude->setMaximumWidth(18*ww);
1253
1254 _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1255 _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1256 _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1257
1258 _sp3CompSummaryOnly = new QCheckBox();
1259 _sp3CompSummaryOnly->setCheckState(Qt::CheckState(settings.value("sp3CompSummaryOnly").toInt()));
1260
1261 ir = 0;
1262 sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"), ir, 0, 1, 40);
1263 ++ir;
1264 sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"), ir, 0, Qt::AlignLeft);
1265 sp3CompLayout->addWidget(_sp3CompFileChooser, ir, 1, 1, 20);
1266 ++ir;
1267 sp3CompLayout->addWidget(new QLabel("Exclude satellites"), ir, 0, Qt::AlignLeft);
1268 sp3CompLayout->addWidget(_sp3CompExclude, ir, 1, Qt::AlignRight);
1269 ++ir;
1270 sp3CompLayout->addWidget(new QLabel("Logfile"), ir, 0, Qt::AlignLeft);
1271 sp3CompLayout->addWidget(_sp3CompLogLineEdit, ir, 1, Qt::AlignRight);
1272 ++ir;
1273 sp3CompLayout->addWidget(new QLabel("Summary only"), ir, 0);
1274 sp3CompLayout->addWidget(_sp3CompSummaryOnly, ir, 1);
1275 ++ir;
1276 sp3CompLayout->addWidget(new QLabel(""), ir, 1);
1277 ++ir;
1278 sp3CompLayout->setRowStretch(ir, 999);
1279
1280 sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1281 sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1282
1283 sp3CompGroup->setLayout(sp3CompLayout);
1284
1285 connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1286 this, SLOT(slotBncTextChanged()));
1287
1288 // Combine Corrections
1289 // -------------------
1290 QGridLayout* cmbLayout = new QGridLayout;
1291
1292 populateCmbTable();
1293 cmbLayout->addWidget(_cmbTable, 0, 0, 8, 10);
1294 cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams"), 0, 10, 1, 10);
1295 cmbLayout->addWidget(addCmbRowButton, 1, 10);
1296 cmbLayout->addWidget(delCmbRowButton, 1, 11);
1297 cmbLayout->addWidget(new QLabel("Method"), 2, 10, Qt::AlignLeft);
1298 cmbLayout->addWidget(_cmbMethodComboBox, 2, 11);
1299 cmbLayout->addWidget(new QLabel("BSX File"), 3, 10, Qt::AlignLeft);
1300 cmbLayout->addWidget(_cmbBsxFile, 3, 11, Qt::AlignRight);
1301 cmbLayout->addWidget(new QLabel("Max Clk Residual"), 4, 10, Qt::AlignLeft);
1302 cmbLayout->addWidget(_cmbMaxresLineEdit, 4, 11, Qt::AlignRight);
1303 cmbLayout->addWidget(new QLabel("Max Orb Displacement"), 5, 10, Qt::AlignLeft);
1304 cmbLayout->addWidget(_cmbMaxdisplacementLineEdit, 5, 11, Qt::AlignRight);
1305 cmbLayout->addWidget(new QLabel("Logfile directory"), 6, 10, Qt::AlignLeft);
1306 cmbLayout->addWidget(_cmbLogPath, 6, 11, Qt::AlignRight);
1307 cmbLayout->addWidget(new QLabel("Sampling"), 7, 10, Qt::AlignLeft);
1308 cmbLayout->addWidget(_cmbSamplSpinBox, 7, 11, Qt::AlignRight);
1309
1310
1311 cmbLayout->addWidget(new QLabel("GNSS"), 0, 14, Qt::AlignLeft);
1312 cmbLayout->addWidget(new QLabel("GPS (C1W/C2W)"), 1, 14);
1313 cmbLayout->addWidget(_cmbGpsCheckBox, 1, 15);
1314
1315 cmbLayout->addWidget(new QLabel("GLONASS (C1P/C2P)"), 2, 14);
1316 cmbLayout->addWidget(_cmbGloCheckBox, 2, 15);
1317
1318 cmbLayout->addWidget(new QLabel("Galileo (C1C/C5Q)"), 3, 14);
1319 cmbLayout->addWidget(_cmbGalCheckBox, 3, 15);
1320
1321 cmbLayout->addWidget(new QLabel("Beidou (C2I/C6I)"), 4, 14);
1322 cmbLayout->addWidget(_cmbBdsCheckBox, 4, 15);
1323
1324 cmbLayout->addWidget(new QLabel("QZSS (C1C/C2L)"), 5, 14);
1325 cmbLayout->addWidget(_cmbQzssCheckBox, 5, 15);
1326
1327 cmbLayout->addWidget(new QLabel("SBAS (C1C/C5Q)"), 6, 14);
1328 cmbLayout->addWidget(_cmbSbasCheckBox, 6, 15);
1329
1330 cmbLayout->addWidget(new QLabel("IRNSS"), 7, 14);
1331 cmbLayout->addWidget(_cmbIrnssCheckBox, 7, 15);
1332 cmbLayout->setRowStretch(9, 999);
1333
1334 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1335 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1336
1337 cmbgroup->setLayout(cmbLayout);
1338
1339 // Upload Layout (Clocks)
1340 // ----------------------
1341 QGridLayout* uploadHlpLayout = new QGridLayout();
1342
1343 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1344 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1345 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1346
1347 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1348 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1349 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1350 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1351 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1352 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1353 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1354 uploadHlpLayout->addWidget(_uploadSamplSp3ComboBox, 0, 7);
1355 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1356 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1357 uploadHlpLayout->addWidget(new QLabel("BSX"), 0,10, Qt::AlignRight);
1358 uploadHlpLayout->addWidget(_uploadSamplBiaSnxSpinBox, 0,11);
1359 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,12);
1360 uploadHlpLayout->addWidget(new QLabel("ANTEX file"), 1, 0, Qt::AlignLeft);
1361 uploadHlpLayout->addWidget(_uploadAntexFile, 1, 1, 1, 4);
1362
1363 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1364 populateUploadTable();
1365
1366 uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1367 uploadLayout->addWidget(_uploadTable);
1368 uploadLayout->addLayout(uploadHlpLayout);
1369
1370 uploadgroup->setLayout(uploadLayout);
1371
1372 // Upload Layout (Ephemeris)
1373 // -------------------------
1374 QGridLayout* uploadHlpLayoutEph = new QGridLayout();
1375
1376 connect(addUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadEphRow()));
1377 connect(delUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadEphRow()));
1378
1379 uploadHlpLayoutEph->addWidget(addUploadEphRowButton, 0, 0);
1380 uploadHlpLayoutEph->addWidget(delUploadEphRowButton, 0, 1);
1381 uploadHlpLayoutEph->addWidget(new QLabel(" Sampling"), 0, 2, Qt::AlignRight);
1382 uploadHlpLayoutEph->addWidget(_uploadSamplRtcmEphSpinBox, 0, 3);
1383
1384 QBoxLayout* uploadLayoutEph = new QBoxLayout(QBoxLayout::TopToBottom);
1385 populateUploadEphTable();
1386
1387 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"));
1388 uploadLayoutEph->addWidget(_uploadEphTable);
1389 uploadLayoutEph->addLayout(uploadHlpLayoutEph);
1390
1391 uploadEphgroup->setLayout(uploadLayoutEph);
1392
1393
1394 // Main Layout
1395 // -----------
1396 QGridLayout* mLayout = new QGridLayout;
1397 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1398 mLayout->addWidget(_aogroup, 0,0);
1399 mLayout->addWidget(_mountPointsTable, 1,0);
1400 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1401 mLayout->addWidget(_loggroup, 2,0);
1402
1403 _canvas->setLayout(mLayout);
1404
1405 // WhatsThis, Network
1406 // ------------------
1407 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator. Without any entry, BNC will try to use the system proxies. </p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet. <i>[key: proxyHost]</i></p>"));
1408 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC. <i>[key: proxyPort]</i></p>"));
1409 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of server certificates. Specify the path to a directory where you save CA certificates on your system. </p><p>BNC creates from *.crt and *.pem files a CA certificate database, which is used by the socket during the handshake phase to validate the peer's certificate. </p><p>Note that SSL communication is usually done over port 443. <i>[key: sslCaCertPath]</i></p>"));
1410 _sslClientCertPathLineEdit->setWhatsThis(tr("<p>Two-sided communication with an Ntrip Broadcaster over SSL requires in addition the exchange of client certificates. Specify the full path to the client certificates on your system.</p><p></p><p>The file naming convention for client certificates in BNC is as follows: &lt;hostname&gt;.&lt;port&gt;.crt for the certificate and &lt;hostname&gt;.&lt;port&gt;.key for the private key, where &lt;hostname&gt; is without https://. </p><p> If available, the client or personal authentication certificate is presented to the peer during the SSL handshake process. Password protected key files are not supported. </p><p>Don't try communication via two sided SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster. </p><p>Note that SSL communication is usually done over port 443. <i>[key: sslClientCertPath]</i></p>"));
1411 _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this. <i>[key: sslIgnoreErrors]</i></p>"));
1412
1413 // WhatsThis, General
1414 // ------------------
1415 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date. <i>[key: logFile]</i></p>"));
1416 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far. <i>[key: rnxAppend]</i></p>"));
1417 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals. The default entry is 'no' that means the reread function is switched of. <p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'. <i>[key: onTheFlyInterval]</i></p>"));
1418 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options. <i>[key: autoStart]</i></p>"));
1419 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes. <i>[key: rawOutFile]</i></p>"));
1420
1421 // WhatsThis, RINEX Observations
1422 // -----------------------------
1423 _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files. <i>[key: rnxPath]</i></p>"));
1424 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file. <i>[key: rnxIntr]</i></p>"));
1425 _rnxSamplComboBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. <i>[key: rnxSampl]</i></p>"));
1426 _rnxSkelExtComboBox->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. <i>[key: rnxSkel]</i></p>"));
1427 _rnxSkelPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where local skeleton files are located.</p><p> If no directory is specified, the path is assumed to where the RINEX Observation files will stored. <i>[key: rnxSkelPath]</i></p>"));
1428 _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types. <i>[key: rnxOnlyWithSKL]</i></p>"));
1429 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems). <i>[key: rnxScript]</i></p>"));
1430 _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'I:ABCX' (System specific signal priorities for IRNSS) </li><li>'G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:18&DPX I:ABCX S:1&C S:5&IQX'. <i>[key: rnxV2Priority]</i></p>"));
1431 _rnxVersComboBox->setWhatsThis(tr("<p>Select the format for RINEX Observation files. <i>[key: rnxVersion]</i></p>"));
1432
1433 // WhatsThis, RINEX Ephemeris
1434 // --------------------------
1435 _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files. <i>[key: ephPath]</i></p>"));
1436 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file. <i>[key: ephIntr]</i></p>"));
1437 _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: ephOutPort]</i></p>"));
1438 _ephVersComboBox->setWhatsThis(tr("<p>Select the format for RINEX Navigation files. <i>[key: ephVersion]</i></p>"));
1439 //_ephFilePerStation->setWhatsThis(tr("<p>By default, all received Broadcast Ephemeris data will be stored within one File. Thick 'File per Stations' to get separate files per station/mountpoint. <i>[key: ephFilePerStation]</i></p>"));
1440
1441 // WhatsThis, RINEX Editing & QC
1442 // -----------------------------
1443 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program. <i>[key: reqcAction]</i></p>"));
1444 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1445 _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory. <i>[key: reqcObsFile]</i></p>"));
1446 _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory. <i>[key: reqcNavFile]</i></p>"));
1447 _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced. <i>[key: reqcOutObsFile]</i></p>"));
1448 _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced. <i>[key: reqcOutNavFile]</i></p>"));
1449 _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced. <i>[key: reqcOutLogFile]</i></p>"));
1450 _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information. <i>[key: reqcLogSummaryOnly]</i></p>"));
1451 _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk. <i>[key: reqcPlotDir]</i></p>"));
1452 _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2&5 R:1&2&3 E:1&7 C:2&6 J:1&2 I:5&9 S:1&5 <br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'G:1&2 R:1&2 E:1&5 C:2&6 J:1&2 I:5&9 S:1&5'. Specifying an empty option string would be overruled by this default. <i>[key: reqcSkyPlotSignals]</i></p>"));
1453
1454 // WhatsThis, SP3 Comparison
1455 // -------------------------
1456 _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma. <i>[key: sp3CompFile]</i></p>"));
1457 _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison. <i>[key: sp3CompExclude]</i></p>"));
1458 _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless. <i>[key: sp3CompOutLogFile]</i></p>"));
1459 _sp3CompSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from comparing SP3 files. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information. <i>[key: sp3CompSummaryOnly]</i></p>"));
1460
1461 // WhatsThis, Broadcast Corrections
1462 // --------------------------------
1463 _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files. <i>[key: corrPath]</i></p>"));
1464 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files. <i>[key: corrIntr]</i></p>"));
1465 _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function. <i>[key: corrPort]</i></p>"));
1466
1467 // WhatsThis, Feed Engine
1468 // ----------------------
1469 _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outPort]</i></p>"));
1470 _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product. <i>[key: outWait]</i></p>"));
1471 _outSamplComboBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds. <i>[key: outSampl]</i></p>"));
1472 _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams. <i>[key: outFile]</i></p>"));
1473 _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function. <i>[key: outUPort]</i></p>"));
1474 _outLockTimeCheckBox->setWhatsThis(tr("<p>Print the lock time in seconds in the feed engine output.<i>[key: outLockTime]</i></p>"));
1475
1476 // WhatsThis, Serial Output
1477 // ------------------------
1478 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware. <i>[key: serialMountPoint]</i></p>"));
1479 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here. <i>[key: serialPortName]</i></p>"));
1480 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended. <i>[key: serialBaudRate]</i></p>"));
1481 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better. <i>[key: serialFlowControl]</i></p>"));
1482 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used. <i>[key: serialDataBits]</i></p>"));
1483 _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'. <i>[key: serialParity]</i></p>"));
1484 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used. <i>[key: serialStopBits]</i></p>"));
1485 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file. <i>[key: serialAutoNMEA]</i></p>"));
1486 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk. <i>[key: serialFileNMEA]</i></p>"));
1487 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively. <i>[key: serialHeightNMEA]</i></p>"));
1488 _serialNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual or receiver generated NMEA GGA sentences and their upload.</p><p>A sampling rate of '0' means, a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals. <i>[key: serialNMEASampling]</i></p>"));
1489
1490 // WhatsThis, Outages
1491 // ------------------
1492 _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span. <i>[key: adviseObsRate]</i></p>"));
1493 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note. <i>[key: adviseFail]</i></p>"));
1494 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note. <i>[key: adviseReco]</i></p>"));
1495 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option. <i>[key: adviseScript]</i></p>"));
1496
1497 // WhatsThis, Miscellaneous
1498 // ------------------------
1499 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options. <i>[key: miscMount]</i></p>"));
1500 _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information. <i>[key: miscIntr]</i></p>"));
1501 _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types. <i>[key: miscScanRTCM]</i></p>"));
1502 _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function. In this case, the stream content remains untouched; BNC does not decode or reformat the data for this output.</p><p> If the decoder string is not an accepted one ('RTCM_2.x', 'RTCM_3.x' and 'RTNET'), please change the decoder string to <ul>"
1503 "<li> 'ZERO' (forward the raw data) or </li>"
1504 "<li> 'ZERO2File' (forward and store the raw data)</li> </ul> in addition. <i>[key: miscPort]</i></p>"));
1505
1506 // WhatsThis, PPP (1)
1507 // ------------------
1508 _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations. <i>[key: PPP/dataSource]</i></p>"));
1509 _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file. <i>[key: PPP/rinexObs]</i></p>"));
1510 _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file. <i>[key: PPP/rinexNav]</i></p>"));
1511 _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP. <i>[key: PPP/corrMount]</i></p>"));
1512 _pppWidgets._ionoMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides VTEC informations in SSR format.</p><p>If you don't specify a corrections stream via this option, BNC will use VTEC informations from the Corrections stream 'mountpoint', if available. <i>[key: PPP/ionoMount]</i></p>"));
1513 _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP. <i>[key: PPP/corrFile]</i></p>"));
1514 _pppWidgets._ionoFile->setWhatsThis(tr("<p>Specify the VTEC file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will use VTEC informations from the Corrections file, if available. <i>[key: PPP/ionoFile]</i></p>"));
1515 _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets and variations</li><li>Satellite APC offsets and variations.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations for satellites and receiver.</p> <i>[key: PPP/antexFile]</i></p>"));
1516 _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:</p><ul><li>Specify the station either by:<ul><li>the 'Mountpoint' of the station's RTCM stream (in real-time PPP mode), or</li><li>the 9-char station ID of the RINEX Version 3 or 4 Observations file (in post processing PPP mode), or </li><li>the 4-char station ID of the RINEX Version 2 Observations file (in post processing PPP mode).</li></ul><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown). </li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.. <i>[key: PPP/crdFile]</i></p>"));
1517 _pppWidgets._blqFile->setWhatsThis(tr("<p>Specify the full path to a 'BLQ file' containing the ocean loading coefficients for different stations. These coefficients can be obtained from the ocean loading service under request trough the web site http://holt.oso.chalmers.se/loading/. <i>[key: PPP/blqFile]</i></p>"));
1518 _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced. <i>[key: PPP/logPath]</i></p>"));
1519 _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced. <i>[key: PPP/nmeaPath]</i></p>"));
1520 _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced. <i>[key: PPP/snxtroPath]</i></p>"));
1521 _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'. <i>[key: PPP/snxtroIntr]</i></p>"));
1522 _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters. <i>[key: PPP/snxtroSampl]</i></p>"));
1523 _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files. <i>[key: PPP/snxtroAc]</i></p>"));
1524 _pppWidgets._snxtroSolId->setWhatsThis(tr("<p>Specify a 1-character solution ID to allow a distinction between different solutions per AC. <i>[key: PPP/snxtroSolId]</i></p>"));
1525 _pppWidgets._snxtroSolType->setWhatsThis(tr("<p>Specify a 3-character solution type, e.g. real-time (RTS), unknown (UNK), .. <i>[key: PPP/snxtroSolType]</i></p>"));
1526 _pppWidgets._snxtroCampId->setWhatsThis(tr("<p>Specify a 3-character campaign ID, e.g. operational (OPS), demonstration (DEM), testing (TST), .. <i>[key: PPP/snxtroCampId]</i></p>"));
1527
1528 // WhatsThis, PPP (2)
1529 // ------------------
1530 _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of linear combination the GPS ambiguity resolutions shall be based:</p><p><ul>"
1531#ifdef USE_PPP_SSR_I
1532 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1533 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1534#else
1535 "<li>'Pi&Li' means that uncombined code and phase data of two frequencies shall be used.</li>"
1536 "<li>'Pi' means that uncombined code data of two frequencies shall be used.</li>"
1537 "<li>'P1&L1' means that uncombined code and phase data of one frequency shall be used.</li>"
1538 "<li>'P1' means that uncombined code data of one frequency shall be used.</li>"
1539 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1540 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1541 "<li>'L3' means that the inonosphere-free linear combination of phase data shall be used.</li> "
1542#endif
1543 "<li>'no' means that you don't want BNC to use GPS data.</li></ul></p><p><i>[key: PPP/lcGPS]</i></p>"));
1544 _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of linear combination the GLONASS ambiguity resolutions shall be based:</p><p><ul>"
1545#ifdef USE_PPP_SSR_I
1546 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1547 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1548 "<li>'L3' means that the inonosphere-free linear combination of phase data shall be used.</li> "
1549#else
1550 "<li>'Pi&Li' means that uncombined code and phase data of two frequencies shall be used.</li>"
1551 "<li>'Pi' means that uncombined code data of two frequencies shall be used.</li>"
1552 "<li>'P1&L1' means that uncombined code and phase data of one frequency shall be used.</li>"
1553 "<li>'P1' means that uncombined code data of one frequency shall be used.</li>"
1554 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1555 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1556 "<li>'L3' means that the inonosphere-free linear combination of phase data shall be used.</li> "
1557#endif
1558 "<li>'no' means that you don't want BNC to use GLONASS data.</li></ul></p><p><i>[key: PPP/lcGLONASS]</i></p>"));
1559 _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of linear combination the Galileo ambiguity resolutions shall be based:</p><p><ul>"
1560#ifdef USE_PPP_SSR_I
1561 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1562 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1563 "<li>'L3' means that the inonosphere-free linear combination of phase data shall be used.</li> "
1564#else
1565 "<li>'Pi&Li' means that uncombined code and phase data of two frequencies shall be used.</li>"
1566 "<li>'Pi' means that uncombined code data of two frequencies shall be used.</li>"
1567 "<li>'P1&L1' means that uncombined code and phase data of one frequency shall be used.</li>"
1568 "<li>'P1' means that uncombined code data of one frequency shall be used.</li>"
1569 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1570 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1571 "<li>'L3' means that the inonosphere-free linear combination of phase data shall be used.</li> "
1572#endif
1573 "<li>'no' means that you don't want BNC to use Galileo data.</li></ul></p><p><i>[key: PPP/lcGalileo]</i></p>"));
1574 _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of linear combination the BDS ambiguity resolutions shall be based:</p><p><ul>"
1575#ifdef USE_PPP_SSR_I
1576 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1577 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1578 "<li>'L3' means that the inonosphere-free linear combination of phase data shall be used.</li> "
1579#else
1580 "<li>'Pi&Li' means that uncombined code and phase data of two frequencies shall be used.</li>"
1581 "<li>'Pi' means that uncombined code data of two frequencies shall be used.</li>"
1582 "<li>'P1&L1' means that uncombined code and phase data of one frequency shall be used.</li>"
1583 "<li>'P1' means that uncombined code data of one frequency shall be used.</li>"
1584 "<li>'P3&L3' means that the inonosphere-free linear combination of code and phase data shall be used.</li>"
1585 "<li>'P3' means that the inonosphere-free linear combination of code data shall be used.</li>"
1586 "<li>'L3' means that the inonosphere-free linear combination of phase data shall be used.</li> "
1587#endif
1588 "<li>'no' means that you don't want BNC to use BDS data.</li></ul></p><p><i>[key: PPP/lcBDS]</i></p>"));
1589 _pppWidgets._constraints->setWhatsThis(tr("<p>Specify, whether ionospheric constraints in form of pseudo-observations shall be added. Please note, this is only valid, if no ionosphere-free linear-combination is used and only helpful as soon as the ionosphere information is more accurate than the code data accuracy. <i>[key: PPP/constraints]</i></p>"));
1590 _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GPS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of GPS C1 code observations to a PPP solution from combined code and phase data. 1.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 1.0' <i>[key: PPP/sigmaC1]</i></p>"));
1591 _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GPS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of GPS L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01' <i>[key: PPP/sigmaL1]</i></p>"));
1592#ifdef USE_PPP
1593 _pppWidgets._sigmaGIM->setWhatsThis(tr("<p>Enter a Sigma for GIM pseudo observations in meters.</p><p>The higher the sigma you enter, the less the contribution of GIM pseudo observations to a PPP solution. 5.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma GIM = 5.0' <i>[key: PPP/sigmaGIM]</i></p>"));
1594#endif
1595 _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from GPS C1 code observations in a PPP solution. '2.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Res C1 = 2.0' <i>[key: PPP/maxResC1]</i></p>"));
1596 _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from GPS L1 phase observations in a PPP solution. '0.02' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Res L1 = 0.02' <i>[key: PPP/maxResL1]</i></p>"));
1597#ifdef USE_PPP
1598 _pppWidgets._maxResGIM->setWhatsThis(tr("<p>Specify a maximum for residuals from GIM pseudo observations in a PPP solution. '5.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Res GIM = 5.0' <i>[key: PPP/maxResGIM]</i></p>"));
1599#endif
1600 _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution. <i>[key: PPP/eleWgtCode]</i></p>"));
1601 _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution. <i>[key: PPP/eleWgtPhase]</i></p>"));
1602 _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum. <i>[key: PPP/minObs]</i></p>"));
1603 _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations. <i>[key: PPP/minEle]</i></p>"));
1604
1605 // WhatsThis, Combine Corrections
1606 // ------------------------------
1607 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Double click on the 'Weight Factor' field to enter a weight factor to be applied for this stream in the combination. A Factor greater than 1 will enlarge the sigma of the clock pseudo-observations and with it down-weight its contribution. Finally, double click on the 'Exclude Satellites' field and specify satellites, to exclude them for an individual AC. An entry 'G04,G31,R' means to excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from one individual AC. Default is an empty option field, meaning that no satellite is excluded from this individual AC.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format. <i>[key: cmbStreams]</i></p>"));
1608 addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1609 delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1610 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning. <i>[key: cmbMethod]</i></p>"));
1611 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Clk Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'. <i>[key: cmbMaxres]</i></p>"));
1612 _cmbMaxdisplacementLineEdit->setWhatsThis(tr("<p>BNC builds mean values for all incoming orbit corrections per satellite. Individual orbit corrections that differ by more than 'Maximal Orb Displacement' meters from the average of all orbit corrections per satellite will be ignored.<p></p>It is suggested to specify a value of about 0.5 m.</p><p>Default is a value of '2.0'. <i>[key: cmbMaxdisplacement]</i></p>"));
1613 _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice. A value of zero '0' tells BNC to use all available samples. <i>[key: cmbSampl]</i></p>"));
1614 _cmbLogPath->setWhatsThis(tr("<p>Specify a directory for saving daily Combination logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no Combination logfiles shall be produced. <i>[key: cmbLogpath]</i></p>"));
1615 _cmbGpsCheckBox->setWhatsThis(tr("<p>GPS clock corrections shall be combined. GPS Broadcast ephemeris and corrections are required. <i>[key: cmbGps]</i></p>"));
1616 _cmbGloCheckBox->setWhatsThis(tr("<p>GLONASS clock corrections shall be combined; GLONASS Broadcast ephemeris and corrections are required. <i>[key: cmbGlo]</i></p>"));
1617 _cmbGalCheckBox->setWhatsThis(tr("<p>Galileo clock corrections shall be combined; Galileo Broadcast ephemeris and corrections are required. <i>[key: cmbGal]</i></p>"));
1618 _cmbBdsCheckBox->setWhatsThis(tr("<p>Beidou clock corrections shall be combined; BDS Broadcast ephemeris and corrections are required. <i>[key: cmbBds]</i></p>"));
1619 _cmbQzssCheckBox->setWhatsThis(tr("<p>QZSS clock corrections shall be combined; QZSS Broadcast ephemeris and corrections are required. <i>[key: cmbQzss]</i></p>"));
1620 _cmbSbasCheckBox->setWhatsThis(tr("<p>SBAS clock corrections shall be combined; SBAS Broadcast ephemeris and corrections are required. <i>[key: cmbSbas]</i></p>"));
1621 _cmbIrnssCheckBox->setWhatsThis(tr("<p>IRNSS clock corrections shall be combined; IRNSS Broadcast ephemeris and corrections are required. <i>[key: cmbIrnss]</i></p>"));
1622 _cmbBsxFile->setWhatsThis(tr("<p> Specify a Bias SINEX File that will be used to add satellite code biases to the combined clocks. <i>[key: cmbBsxFile]</i></p>"));
1623
1624 // WhatsThis, Upload Corrections
1625 // -----------------------------
1626 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) as well as Code Biases in different SSR formats. You may have a situation where clocks, orbits and code biases come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Select the Ntrip Version that shall be used for data upload. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. If Ntrip Version 2 is chosen, click to the 'User' field to enter a stream upload user name. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS20) for outgoing clock and orbit corrections.</p><p>Select a target SSR format (e.g. IGS-SSR) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BKG0MGXRTS${V3PROD}.SP3.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BKG0MGXRTS${V3PROD}.CLK.</p><p>Specify a path for saving generated Code Biases as SINEX Bias files. If the specified directory does not exist, BNC will not create SINEX Bias files. The following is a path example for a Linux system: /home/user/BKG0MGXRTS${V3PROD}.BIA.</p><p>Note that '${V3PROD}' produces the time stamp in the filename, which is related to the RINEX version 3 filename concept.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table. <i>[key: uploadMountpointsOut]</i></p>"));
1627 addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1628 delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Corrections' table.</p>"));
1629 _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3, Clock RINEX and Bias SINEX files. <i>[key: uploadIntr]</i></p>"));
1630 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages. <i>[key: uploadSamplRtcmEphCorr]</i></p>"));
1631 _uploadSamplSp3ComboBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files. <i>[key: uploadSamplSp3]</i></p>"));
1632 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files. <i>[key: uploadSamplClkRnx]</i></p>"));
1633 _uploadSamplBiaSnxSpinBox->setWhatsThis(tr("<p>Select a Bias SINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Bias SINEX files. <i>[key: uploadSamplBiaSnx]</i></p>"));
1634 setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1635 _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs. <i>[key: uploadAntexFile]</i></p>"));
1636
1637 // WhatsThis, Upload Ephemeris
1638 // ---------------------------
1639 _uploadEphTable->setWhatsThis(tr("<p>BNC can upload Broadcast Ephemeris streams in RTCM Version 3 format. To fill the 'Upload Ephemeris' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Select the Ntrip Version that shall be used for data upload. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. If Ntrip Version 2 is chosen, click to the 'User' field to enter a stream upload user name. Specify the satellite system(s) that shall be part of the uploaded stream (e.g. G for GPS or GRE for GPS+GLONASS+Galileo, or ALL). <i>[key: uploadEphHost]</i></p>"));
1640 addUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Ephemeris' table.</p>"));
1641 delUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Ephemeris' table.</p>"));
1642 _uploadSamplRtcmEphSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds. <i>[key: uploadSamplRtcmEph]</i></p>"));
1643
1644 // WhatsThis, Streams Canvas
1645 // -------------------------
1646 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. "
1647 "Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster "
1648 "according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it "
1649 "and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>"
1650 "BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. "
1651 "BNC allows users to change this selection by editing the decoder string. "
1652 "Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. "
1653 "Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>"
1654 "In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. "
1655 "To do this, specify the decoder string as 'ZERO2FILE'.</p><p>"
1656 "BNC allows as well to forward streams related to the specified 'Mountpoint' on top of the 'Miscellaneous Panel' "
1657 "through a TCP/IP port of your local host. "
1658 "In this case, the stream content remains untouched; BNC does not decode or reformat the data for this output. "
1659 "If the decoder string is not an accepted one, please change the decoder string to 'ZERO' (forward the raw data only) or 'ZERO2FILE' (forward and store the raw data) in addition.</p><p>"
1660 "BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. "
1661 "To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster "
1662 "together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. "
1663 "Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. <i>[key: mountPoints]</i></p>"));
1664 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1665 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1666 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1667 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1668 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1669
1670 // WhatsThis, Log Canvas
1671 // ---------------------
1672 _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1673 _bncFigure->setWhatsThis(tr("<p>The bandwith consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1674 _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1675 _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1676
1677
1678 // Enable/Disable all Widgets
1679 // --------------------------
1680 slotBncTextChanged();
1681 enableStartStop();
1682
1683 // Auto start
1684 // ----------
1685 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1686 slotStart();
1687 }
1688}
1689
1690// Destructor
1691////////////////////////////////////////////////////////////////////////////
1692bncWindow::~bncWindow() {
1693 if (_caster) {
1694 delete _caster; BNC_CORE->setCaster(0);
1695 }
1696 if (_casterEph) {
1697 delete _casterEph;
1698 }
1699 delete _bncFigureLate;
1700 delete _bncFigurePPP;
1701 delete _actHelp;
1702 delete _actAbout;
1703 delete _actFlowchart;
1704 delete _actFontSel;
1705 delete _actSaveOpt;
1706 delete _actQuit;
1707 delete _actAddMountPoints;
1708 delete _actDeleteMountPoints;
1709 delete _actMapMountPoints;
1710 delete _actStart;
1711 delete _actStop;
1712 delete _actwhatsthis;
1713 delete _proxyHostLineEdit;
1714 delete _proxyPortLineEdit;
1715 delete _sslCaCertPathLineEdit;
1716 delete _sslClientCertPathLineEdit;
1717 delete _sslIgnoreErrorsCheckBox;
1718 delete _logFileLineEdit;
1719 delete _rawOutFileLineEdit;
1720 delete _rnxAppendCheckBox;
1721 delete _onTheFlyComboBox;
1722 delete _autoStartCheckBox;
1723 delete _rnxPathLineEdit;
1724 delete _rnxIntrComboBox;
1725 delete _rnxSamplComboBox;
1726 delete _rnxSkelExtComboBox;
1727 delete _rnxSkelPathLineEdit;
1728 delete _rnxFileCheckBox;
1729 delete _rnxScrpLineEdit;
1730 delete _rnxVersComboBox;
1731 delete _rnxV2Priority;
1732 delete _ephPathLineEdit;
1733 //delete _ephFilePerStation;
1734 delete _ephIntrComboBox;
1735 delete _ephOutPortLineEdit;
1736 delete _ephVersComboBox;
1737 delete _corrPathLineEdit;
1738 delete _corrIntrComboBox;
1739 delete _corrPortLineEdit;
1740 delete _outPortLineEdit;
1741 delete _outWaitSpinBox;
1742 delete _outSamplComboBox;
1743 delete _outFileLineEdit;
1744 delete _outUPortLineEdit;
1745 delete _outLockTimeCheckBox;
1746 delete _serialMountPointLineEdit;
1747 delete _serialPortNameLineEdit;
1748 delete _serialBaudRateComboBox;
1749 delete _serialFlowControlComboBox;
1750 delete _serialDataBitsComboBox;
1751 delete _serialParityComboBox;
1752 delete _serialStopBitsComboBox;
1753 delete _serialAutoNMEAComboBox;
1754 delete _serialFileNMEALineEdit;
1755 delete _serialHeightNMEALineEdit;
1756 delete _serialNMEASamplingSpinBox;
1757 delete _adviseObsRateComboBox;
1758 delete _adviseFailSpinBox;
1759 delete _adviseRecoSpinBox;
1760 delete _adviseScriptLineEdit;
1761 delete _miscMountLineEdit;
1762 delete _miscPortLineEdit;
1763 delete _miscIntrComboBox;
1764 delete _miscScanRTCMCheckBox;
1765 _mountPointsTable->deleteLater();
1766 delete _log;
1767 delete _loggroup;
1768 _cmbTable->deleteLater();
1769 delete _cmbMaxresLineEdit;
1770 delete _cmbMaxdisplacementLineEdit;
1771 delete _cmbSamplSpinBox;
1772 delete _cmbLogPath;
1773 delete _cmbMethodComboBox;
1774 delete _cmbGpsCheckBox;
1775 delete _cmbGloCheckBox;
1776 delete _cmbGalCheckBox;
1777 delete _cmbBdsCheckBox;
1778 delete _cmbQzssCheckBox;
1779 delete _cmbSbasCheckBox;
1780 delete _cmbIrnssCheckBox;
1781 delete _cmbBsxFile;
1782 _uploadEphTable->deleteLater();
1783 delete _uploadSamplRtcmEphCorrSpinBox;
1784 _uploadTable->deleteLater();
1785 delete _uploadIntrComboBox;
1786 delete _uploadAntexFile;
1787 delete _uploadSamplRtcmEphSpinBox;
1788 delete _uploadSamplSp3ComboBox;
1789 delete _uploadSamplClkRnxSpinBox;
1790 delete _uploadSamplBiaSnxSpinBox;
1791 delete _reqcActionComboBox;
1792 delete _reqcObsFileChooser;
1793 delete _reqcNavFileChooser;
1794 delete _reqcOutObsLineEdit;
1795 delete _reqcOutNavLineEdit;
1796 delete _reqcOutLogLineEdit;
1797 delete _reqcPlotDirLineEdit;
1798 delete _reqcSkyPlotSignals;
1799 delete _reqcLogSummaryOnly;
1800 delete _reqcEditOptionButton;
1801 delete _sp3CompFileChooser;
1802 delete _sp3CompExclude;
1803 delete _sp3CompLogLineEdit;
1804 delete _sp3CompSummaryOnly;
1805 //delete _canvas;
1806}
1807
1808//
1809////////////////////////////////////////////////////////////////////////////
1810void bncWindow::populateMountPointsTable() {
1811
1812 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1813 _mountPointsTable->removeRow(iRow);
1814 }
1815
1816 bncSettings settings;
1817
1818 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1819 int iRow = 0;
1820 while (it.hasNext()) {
1821 QStringList hlp = it.next().split(" ");
1822 if (hlp.size() < 7) continue;
1823 _mountPointsTable->insertRow(iRow);
1824
1825 QUrl url(hlp[0]);
1826
1827 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1828 QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1829 QString nmea(hlp[5]);
1830 if (hlp[6] == "S") {
1831 fullPath = hlp[0].replace(0,2,"");
1832 }
1833 QString ntripVersion = "2";
1834 if (hlp.size() >= 7) {
1835 ntripVersion = (hlp[6]);
1836 }
1837
1838 QTableWidgetItem* it;
1839 it = new QTableWidgetItem(url.userInfo());
1840 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1841 _mountPointsTable->setItem(iRow, 0, it);
1842
1843 it = new QTableWidgetItem(fullPath);
1844 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1845 _mountPointsTable->setItem(iRow, 1, it);
1846
1847 it = new QTableWidgetItem(format);
1848 _mountPointsTable->setItem(iRow, 2, it);
1849
1850 it = new QTableWidgetItem(country);
1851 _mountPointsTable->setItem(iRow, 3, it);
1852
1853 if (nmea == "yes") {
1854 it = new QTableWidgetItem(latitude);
1855 _mountPointsTable->setItem(iRow, 4, it);
1856 it = new QTableWidgetItem(longitude);
1857 _mountPointsTable->setItem(iRow, 5, it);
1858 } else {
1859 it = new QTableWidgetItem(latitude);
1860 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1861 _mountPointsTable->setItem(iRow, 4, it);
1862
1863 it = new QTableWidgetItem(longitude);
1864 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1865 _mountPointsTable->setItem(iRow, 5, it);
1866 }
1867
1868 it = new QTableWidgetItem(nmea);
1869 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1870 _mountPointsTable->setItem(iRow, 6, it);
1871
1872 it = new QTableWidgetItem(ntripVersion);
1873 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1874 _mountPointsTable->setItem(iRow, 7, it);
1875
1876 bncTableItem* bncIt = new bncTableItem();
1877 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1878 _mountPointsTable->setItem(iRow, 8, bncIt);
1879
1880 iRow++;
1881 }
1882
1883 _mountPointsTable->sortItems(1);
1884
1885 enableStartStop();
1886}
1887
1888// Retrieve Table
1889////////////////////////////////////////////////////////////////////////////
1890void bncWindow::slotAddMountPoints() {
1891
1892 bncSettings settings;
1893 QString proxyHost = settings.value("proxyHost").toString();
1894 int proxyPort = settings.value("proxyPort").toInt();
1895 if (proxyHost != _proxyHostLineEdit->text() ||
1896 proxyPort != _proxyPortLineEdit->text().toInt()) {
1897 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1898 "changed. Use the new ones?",
1899 QMessageBox::Yes, QMessageBox::No,
1900 QMessageBox::NoButton);
1901 if (iRet == QMessageBox::Yes) {
1902 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1903 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1904 }
1905 }
1906
1907 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1908 settings.setValue("sslClientCertPath", _sslClientCertPathLineEdit->text());
1909 settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1910
1911 QMessageBox msgBox;
1912 msgBox.setIcon(QMessageBox::Question);
1913 msgBox.setWindowTitle("Add Stream");
1914 msgBox.setText("Add stream(s) coming from:");
1915
1916 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1917 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1918 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1919 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1920 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1921
1922 msgBox.exec();
1923
1924 if (msgBox.clickedButton() == buttonNtrip) {
1925 bncTableDlg* dlg = new bncTableDlg(this);
1926 dlg->move(this->pos().x()+50, this->pos().y()+50);
1927 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1928 this, SLOT(slotNewMountPoints(QStringList*)));
1929 dlg->exec();
1930 delete dlg;
1931 } else if (msgBox.clickedButton() == buttonIP) {
1932 bncIpPort* ipp = new bncIpPort(this);
1933 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1934 this, SLOT(slotNewMountPoints(QStringList*)));
1935 ipp->exec();
1936 delete ipp;
1937 } else if (msgBox.clickedButton() == buttonUDP) {
1938 bncUdpPort* udp = new bncUdpPort(this);
1939 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1940 this, SLOT(slotNewMountPoints(QStringList*)));
1941 udp->exec();
1942 delete udp;
1943 } else if (msgBox.clickedButton() == buttonSerial) {
1944 bncSerialPort* sep = new bncSerialPort(this);
1945 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1946 this, SLOT(slotNewMountPoints(QStringList*)));
1947 sep->exec();
1948 delete sep;
1949 } else if (msgBox.clickedButton() == buttonCancel) {
1950 // Cancel
1951 }
1952
1953 enableStartStop();
1954}
1955
1956// Delete Selected Mount Points
1957////////////////////////////////////////////////////////////////////////////
1958void bncWindow::slotDeleteMountPoints() {
1959
1960 int nRows = _mountPointsTable->rowCount();
1961 std::vector <bool> flg(nRows);
1962 for (int iRow = 0; iRow < nRows; iRow++) {
1963 if (_mountPointsTable->item(iRow,1)->isSelected()) {
1964 flg[iRow] = true;
1965 }
1966 else {
1967 flg[iRow] = false;
1968 }
1969 }
1970 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1971 if (flg[iRow]) {
1972 _mountPointsTable->removeRow(iRow);
1973 }
1974 }
1975 _actDeleteMountPoints->setEnabled(false);
1976
1977 enableStartStop();
1978}
1979
1980// New Mount Points Selected
1981////////////////////////////////////////////////////////////////////////////
1982void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1983 int iRow = 0;
1984 QListIterator<QString> it(*mountPoints);
1985 while (it.hasNext()) {
1986 QStringList hlp = it.next().split(" ");
1987 QUrl url(hlp[0]);
1988 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1989 QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1990 QString nmea(hlp[5]);
1991 if (hlp[6] == "S") {
1992 fullPath = hlp[0].replace(0,2,"");
1993 }
1994 QString ntripVersion = "2";
1995 if (hlp.size() >= 7) {
1996 ntripVersion = (hlp[6]);
1997 }
1998
1999 _mountPointsTable->insertRow(iRow);
2000
2001 QTableWidgetItem* it;
2002 it = new QTableWidgetItem(url.userInfo());
2003 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
2004 _mountPointsTable->setItem(iRow, 0, it);
2005
2006 it = new QTableWidgetItem(fullPath);
2007 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
2008 _mountPointsTable->setItem(iRow, 1, it);
2009
2010 it = new QTableWidgetItem(format);
2011 _mountPointsTable->setItem(iRow, 2, it);
2012
2013 it = new QTableWidgetItem(country);
2014 _mountPointsTable->setItem(iRow, 3, it);
2015
2016 if (nmea == "yes") {
2017 it = new QTableWidgetItem(latitude);
2018 _mountPointsTable->setItem(iRow, 4, it);
2019 it = new QTableWidgetItem(longitude);
2020 _mountPointsTable->setItem(iRow, 5, it);
2021 } else {
2022 it = new QTableWidgetItem(latitude);
2023 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
2024 _mountPointsTable->setItem(iRow, 4, it);
2025 it = new QTableWidgetItem(longitude);
2026 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
2027 _mountPointsTable->setItem(iRow, 5, it);
2028 }
2029
2030 it = new QTableWidgetItem(nmea);
2031 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
2032 _mountPointsTable->setItem(iRow, 6, it);
2033
2034 it = new QTableWidgetItem(ntripVersion);
2035 ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
2036 _mountPointsTable->setItem(iRow, 7, it);
2037
2038 bncTableItem* bncIt = new bncTableItem();
2039 _mountPointsTable->setItem(iRow, 8, bncIt);
2040
2041 iRow++;
2042 }
2043 _mountPointsTable->hideColumn(0);
2044 _mountPointsTable->hideColumn(3);
2045 _mountPointsTable->sortItems(1);
2046 delete mountPoints;
2047
2048 enableStartStop();
2049}
2050
2051// Save Options (serialize)
2052////////////////////////////////////////////////////////////////////////////
2053void bncWindow::slotSaveOptions() {
2054 saveOptions();
2055 bncSettings settings;
2056 settings.sync();
2057}
2058
2059// Save Options (memory only)
2060////////////////////////////////////////////////////////////////////////////
2061void bncWindow::saveOptions() {
2062
2063 QStringList mountPoints;
2064 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2065
2066 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
2067 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2068 "@" + _mountPointsTable->item(iRow, 1)->text() );
2069
2070 mountPoints.append(url.toString() + " " +
2071 _mountPointsTable->item(iRow, 2)->text()
2072 + " " + _mountPointsTable->item(iRow, 3)->text()
2073 + " " + _mountPointsTable->item(iRow, 4)->text()
2074 + " " + _mountPointsTable->item(iRow, 5)->text()
2075 + " " + _mountPointsTable->item(iRow, 6)->text()
2076 + " " + _mountPointsTable->item(iRow, 7)->text());
2077 } else {
2078 mountPoints.append(
2079 "//" + _mountPointsTable->item(iRow, 1)->text()
2080 + " " + _mountPointsTable->item(iRow, 2)->text()
2081 + " " + _mountPointsTable->item(iRow, 3)->text()
2082 + " " + _mountPointsTable->item(iRow, 4)->text()
2083 + " " + _mountPointsTable->item(iRow, 5)->text()
2084 + " " + _mountPointsTable->item(iRow, 6)->text()
2085 + " " + _mountPointsTable->item(iRow, 7)->text());
2086 }
2087 }
2088
2089 QStringList cmbStreams;
2090 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
2091 QString hlp;
2092 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2093 if (_cmbTable->item(iRow, iCol)) {
2094 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
2095 }
2096 }
2097 if (!hlp.isEmpty()) {
2098 cmbStreams << hlp;
2099 }
2100 }
2101
2102 QStringList uploadMountpointsOut;
2103 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2104 QString hlp;
2105 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2106 if (_uploadTable->cellWidget(iRow, iCol) &&
2107 (iCol == 3 || iCol == 4 || iCol == 5 || iCol == 6 || iCol == 7 || iCol == 8)) {
2108 if (iCol == 3) {
2109 QComboBox* ntripversion = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
2110 hlp += ntripversion->currentText() + ",";
2111 }
2112 else if (iCol == 4 ) {
2113 QLineEdit* user = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
2114 hlp += user->text() + ",";
2115 }
2116 else if (iCol == 5) {
2117 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
2118 hlp += passwd->text() + ",";
2119 }
2120 else if (iCol == 6) {
2121 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
2122 hlp += system->currentText() + ",";
2123 }
2124 else if (iCol == 7) {
2125 QComboBox* format = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
2126 hlp += format->currentText() + ",";
2127 }
2128 else if (iCol == 8) {
2129 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
2130 QString state; state.setNum(com->checkState());
2131 hlp += state + ",";
2132 }
2133 }
2134 else if (_uploadTable->item(iRow, iCol)) {
2135 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
2136 }
2137 }
2138 if (!hlp.isEmpty()) {
2139 uploadMountpointsOut << hlp;
2140 }
2141 }
2142
2143 QStringList uploadEphMountpointsOut;
2144 for (int iRow = 0; iRow < _uploadEphTable->rowCount(); iRow++) {
2145 QString hlp;
2146 for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
2147 if (_uploadEphTable->cellWidget(iRow, iCol) &&
2148 (iCol == 3 || iCol == 4 || iCol == 5 || iCol == 6)) {
2149 if (iCol == 3) {
2150 QComboBox* ntripversion = (QComboBox*)(_uploadEphTable->cellWidget(iRow, iCol));
2151 hlp += ntripversion->currentText() + ",";
2152 }
2153 else if (iCol == 4 ) {
2154 QLineEdit* user = (QLineEdit*)(_uploadEphTable->cellWidget(iRow, iCol));
2155 hlp += user->text() + ",";
2156 }
2157 else if (iCol == 5) {
2158 QLineEdit* passwd = (QLineEdit*)(_uploadEphTable->cellWidget(iRow, iCol));
2159 hlp += passwd->text() + ",";
2160 }
2161 else if (iCol == 6) {
2162 QLineEdit* system = (QLineEdit*)(_uploadEphTable->cellWidget(iRow, iCol));
2163 hlp += system->text() + ",";
2164 }
2165 }
2166 else if (_uploadEphTable->item(iRow, iCol)) {
2167 hlp += _uploadEphTable->item(iRow, iCol)->text() + ",";
2168 }
2169 }
2170 if (!hlp.isEmpty()) {
2171 uploadEphMountpointsOut << hlp;
2172 }
2173 }
2174
2175 bncSettings settings;
2176
2177 settings.setValue("startTab", _aogroup->currentIndex());
2178 settings.setValue("statusTab", _loggroup->currentIndex());
2179 settings.setValue("mountPoints", mountPoints);
2180// Network
2181 settings.setValue("proxyHost", _proxyHostLineEdit->text());
2182 settings.setValue("proxyPort", _proxyPortLineEdit->text());
2183 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
2184 settings.setValue("sslClientCertPath", _sslClientCertPathLineEdit->text());
2185 settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
2186// General
2187 settings.setValue("logFile", _logFileLineEdit->text());
2188 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
2189 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
2190 settings.setValue("autoStart", _autoStartCheckBox->checkState());
2191 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
2192// RINEX Observations
2193 settings.setValue("rnxPath", _rnxPathLineEdit->text());
2194 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
2195 settings.setValue("rnxSampl", _rnxSamplComboBox->currentText());
2196 settings.setValue("rnxSkel", _rnxSkelExtComboBox->currentText());
2197 settings.setValue("rnxSkelPath", _rnxSkelPathLineEdit->text());
2198 settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
2199 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
2200 settings.setValue("rnxV2Priority",_rnxV2Priority->text());
2201 settings.setValue("rnxVersion", _rnxVersComboBox->currentText());
2202// RINEX Ephemeris
2203 settings.setValue("ephPath", _ephPathLineEdit->text());
2204 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
2205 settings.setValue("ephOutPort", _ephOutPortLineEdit->text());
2206 settings.setValue("ephVersion", _ephVersComboBox->currentText());
2207 //settings.setValue("ephFilePerStation", _ephFilePerStation->checkState());
2208// Broadcast Corrections
2209 settings.setValue("corrPath", _corrPathLineEdit->text());
2210 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
2211 settings.setValue("corrPort", _corrPortLineEdit->text());
2212// Feed Engine
2213 settings.setValue("outPort", _outPortLineEdit->text());
2214 settings.setValue("outWait", _outWaitSpinBox->value());
2215 settings.setValue("outSampl", _outSamplComboBox->currentText());
2216 settings.setValue("outFile", _outFileLineEdit->text());
2217 settings.setValue("outLockTime",_outLockTimeCheckBox->checkState()); settings.setValue("outUPort", _outUPortLineEdit->text());
2218// Serial Output
2219 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
2220 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
2221 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
2222 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
2223 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
2224 settings.setValue("serialParity", _serialParityComboBox->currentText());
2225 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
2226 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
2227 settings.setValue("serialFileNMEA", _serialFileNMEALineEdit->text());
2228 settings.setValue("serialHeightNMEA", _serialHeightNMEALineEdit->text());
2229 settings.setValue("serialNMEASampling", _serialNMEASamplingSpinBox->value());
2230// Outages
2231 settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
2232 settings.setValue("adviseFail", _adviseFailSpinBox->value());
2233 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
2234 settings.setValue("adviseScript", _adviseScriptLineEdit->text());
2235// Miscellaneous
2236 settings.setValue("miscMount", _miscMountLineEdit->text());
2237 settings.setValue("miscPort", _miscPortLineEdit->text());
2238 settings.setValue("miscIntr", _miscIntrComboBox->currentText());
2239 settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
2240// Reqc
2241 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
2242 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
2243 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
2244 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
2245 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
2246 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
2247 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
2248 settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
2249 settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
2250// SP3 Comparison
2251 settings.setValue("sp3CompFile", _sp3CompFileChooser->fileName());
2252 settings.setValue("sp3CompExclude", _sp3CompExclude->text());
2253 settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
2254 settings.setValue("sp3CompSummaryOnly",_sp3CompSummaryOnly->checkState());
2255// Combine Corrections
2256 if (!cmbStreams.isEmpty()) {
2257 settings.setValue("cmbStreams", cmbStreams);
2258 }
2259 else {
2260 settings.setValue("cmbStreams", "");
2261 }
2262 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
2263 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
2264 settings.setValue("cmbMaxdisplacement", _cmbMaxdisplacementLineEdit->text());
2265 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
2266 settings.setValue("cmbLogpath", _cmbLogPath->text());
2267 settings.setValue("cmbGps", _cmbGpsCheckBox->checkState());
2268 settings.setValue("cmbGlo", _cmbGloCheckBox->checkState());
2269 settings.setValue("cmbGal", _cmbGalCheckBox->checkState());
2270 settings.setValue("cmbBds", _cmbBdsCheckBox->checkState());
2271 settings.setValue("cmbQzss", _cmbQzssCheckBox->checkState());
2272 settings.setValue("cmbSbas", _cmbSbasCheckBox->checkState());
2273 settings.setValue("cmbIrnss", _cmbIrnssCheckBox->checkState());
2274 settings.setValue("cmbBsxFile", _cmbBsxFile->fileName());
2275
2276// Upload Corrections
2277 if (!uploadMountpointsOut.isEmpty()) {
2278 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
2279 }
2280 else {
2281 settings.setValue("uploadMountpointsOut", "");
2282 }
2283 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
2284 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
2285 settings.setValue("uploadSamplSp3", _uploadSamplSp3ComboBox->currentText());
2286 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
2287 settings.setValue("uploadSamplBiaSnx", _uploadSamplBiaSnxSpinBox->value());
2288 settings.setValue("uploadAntexFile", _uploadAntexFile->fileName());
2289// Upload Ephemeris
2290 if (!uploadEphMountpointsOut.isEmpty()) {
2291 settings.setValue("uploadEphMountpointsOut", uploadEphMountpointsOut);
2292 }
2293 else {
2294 settings.setValue("uploadEphMountpointsOut", "");
2295 }
2296 settings.setValue("uploadSamplRtcmEph", _uploadSamplRtcmEphSpinBox->value());
2297
2298 if (_caster) {
2299 _caster->readMountPoints();
2300 }
2301
2302 _pppWidgets.saveOptions();
2303}
2304
2305// All get slots terminated
2306////////////////////////////////////////////////////////////////////////////
2307void bncWindow::slotGetThreadsFinished() {
2308 BNC_CORE->slotMessage("All Get Threads Terminated", true);
2309 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2310 delete _casterEph; _casterEph = 0;
2311 _runningRealTime = false;
2312 enableStartStop();
2313}
2314
2315// Start It!
2316////////////////////////////////////////////////////////////////////////////
2317void bncWindow::slotStart() {
2318 saveOptions();
2319 if ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
2320 _runningPPP = true;
2321 enableStartStop();
2322 _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
2323 BNC_CORE->startPPP();
2324 _bncFigurePPP->reset();
2325 }
2326 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2327 if (_reqcActionComboBox->currentText() == "Analyze") {
2328 _runningQC = true;
2329 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2330 connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2331 reqcAnalyze->start();
2332 }
2333 else {
2334 _runningEdit = true;
2335 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2336 connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2337 reqcEdit->start();
2338 }
2339 enableStartStop();
2340 }
2341 else if (!_sp3CompFileChooser->fileName().isEmpty()) {
2342 _runningSp3Comp = true;
2343 t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2344 connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2345 sp3Comp->start();
2346 enableStartStop();
2347 }
2348 else {
2349 startRealTime();
2350 BNC_CORE->startPPP();
2351 }
2352}
2353
2354// Start Real-Time (Retrieve Data etc.)
2355////////////////////////////////////////////////////////////////////////////
2356void bncWindow::startRealTime() {
2357
2358 _runningRealTime = true;
2359
2360 _bncFigurePPP->reset();
2361
2362 _actDeleteMountPoints->setEnabled(false);
2363
2364 enableStartStop();
2365
2366 _caster = new bncCaster();
2367
2368 BNC_CORE->setCaster(_caster);
2369 BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2370 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2371 BNC_CORE->initCombination();
2372
2373 connect(_caster, SIGNAL(getThreadsFinished()), this, SLOT(slotGetThreadsFinished()));
2374
2375 connect(_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)), this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2376
2377 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " (" BNC_OS ") ==========", true);
2378
2379 bncSettings settings;
2380
2381 // Active panels
2382 // -------------
2383 if (!_rnxPathLineEdit->text().isEmpty())
2384 BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2385 if (!_ephPathLineEdit->text().isEmpty())
2386 BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2387 if (!_corrPathLineEdit->text().isEmpty())
2388 BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2389 if (!_outPortLineEdit->text().isEmpty())
2390 BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2391 if (!_serialMountPointLineEdit->text().isEmpty())
2392 BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2393 if (!_adviseObsRateComboBox->currentText().isEmpty())
2394 BNC_CORE->slotMessage("Panel 'Outages' active", true);
2395 if (!_miscMountLineEdit->text().isEmpty())
2396 BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2397 if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2398 BNC_CORE->slotMessage("Panel 'PPP' active", true);
2399 if (_cmbTable->rowCount() > 0)
2400 BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2401 if (_uploadTable->rowCount() > 0)
2402 BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2403 if (_uploadEphTable->rowCount() > 0)
2404 BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2405
2406 QDir rnxdir(settings.value("rnxPath").toString());
2407 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2408
2409 QString rnx_file = settings.value("rnxScript").toString();
2410 if ( !rnx_file.isEmpty() ) {
2411 QFile rnxfile(settings.value("rnxScript").toString());
2412 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2413 }
2414
2415 QDir ephdir(settings.value("ephPath").toString());
2416 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2417
2418 QDir corrdir(settings.value("corrPath").toString());
2419 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2420
2421 QString advise_file = settings.value("adviseScript").toString();
2422 if ( !advise_file.isEmpty() ) {
2423 QFile advisefile(settings.value("adviseScript").toString());
2424 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2425 }
2426
2427 _caster->readMountPoints();
2428
2429 _casterEph = new bncEphUploadCaster();
2430}
2431
2432// Retrieve Data
2433////////////////////////////////////////////////////////////////////////////
2434void bncWindow::slotStop() {
2435 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2436 QMessageBox::Yes, QMessageBox::No,
2437 QMessageBox::NoButton);
2438 if (iRet == QMessageBox::Yes) {
2439 BNC_CORE->stopPPP();
2440 BNC_CORE->stopCombination();
2441 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2442 delete _casterEph; _casterEph = 0;
2443 _runningRealTime = false;
2444 _runningPPP = false;
2445 enableStartStop();
2446 }
2447}
2448
2449// Close Application gracefully
2450////////////////////////////////////////////////////////////////////////////
2451void bncWindow::closeEvent(QCloseEvent* event) {
2452
2453 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2454 QMessageBox::Yes, QMessageBox::No,
2455 QMessageBox::Cancel);
2456
2457 if (iRet == QMessageBox::Cancel) {
2458 event->ignore();
2459 return;
2460 }
2461 else if (iRet == QMessageBox::Yes) {
2462 slotSaveOptions();
2463 }
2464
2465 BNC_CORE->stopPPP();
2466
2467 QMainWindow::closeEvent(event);
2468}
2469
2470// User changed the selection of mountPoints
2471////////////////////////////////////////////////////////////////////////////
2472void bncWindow::slotSelectionChanged() {
2473 if (_mountPointsTable->selectedItems().isEmpty()) {
2474 _actDeleteMountPoints->setEnabled(false);
2475 }
2476 else {
2477 _actDeleteMountPoints->setEnabled(true);
2478 }
2479}
2480
2481// Display Program Messages
2482////////////////////////////////////////////////////////////////////////////
2483void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2484 if (showOnScreen ) {
2485 _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2486 }
2487}
2488
2489// About Message
2490////////////////////////////////////////////////////////////////////////////
2491void bncWindow::slotAbout() {
2492 new bncAboutDlg(0);
2493}
2494
2495//Flowchart
2496////////////////////////////////////////////////////////////////////////////
2497void bncWindow::slotFlowchart() {
2498 new bncFlowchartDlg(0);
2499}
2500
2501// Help Window
2502////////////////////////////////////////////////////////////////////////////
2503void bncWindow::slotHelp() {
2504 QUrl url = QUrl::fromLocalFile(":/bnchelp.html");
2505 new bncHlpDlg(0, url);
2506}
2507
2508// Select Fonts
2509////////////////////////////////////////////////////////////////////////////
2510void bncWindow::slotFontSel() {
2511 bool ok;
2512 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2513 if (ok) {
2514 bncSettings settings;
2515 settings.setValue("font", newFont.toString());
2516 QApplication::setFont(newFont);
2517 int ww = QFontMetrics(newFont).horizontalAdvance('w');
2518 setMinimumSize(60*ww, 80*ww);
2519 resize(60*ww, 80*ww);
2520 }
2521}
2522
2523// Whats This Help
2524void bncWindow::slotWhatsThis() {
2525 QWhatsThis::enterWhatsThisMode();
2526}
2527
2528//
2529////////////////////////////////////////////////////////////////////////////
2530void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2531 _threads = threads;
2532
2533 _bncFigure->updateMountPoints();
2534 _bncFigureLate->updateMountPoints();
2535
2536 populateMountPointsTable();
2537 bncSettings settings;
2538 _outSamplComboBox->findText(settings.value("outSampl").toString());
2539 _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2540 QListIterator<bncGetThread*> iTh(threads);
2541 while (iTh.hasNext()) {
2542 bncGetThread* thread = iTh.next();
2543 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2544 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2545 "@" + _mountPointsTable->item(iRow, 1)->text() );
2546 if (url == thread->mountPoint() &&
2547 _mountPointsTable->item(iRow, 4)->text() == thread->latitude() &&
2548 _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2549 ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2550 disconnect(thread, SIGNAL(newBytes(QByteArray, double)), _bncFigure, SLOT(slotNewData(QByteArray, double)));
2551 connect(thread, SIGNAL(newBytes(QByteArray, double)), _bncFigure, SLOT(slotNewData(QByteArray, double)));
2552 disconnect(thread, SIGNAL(newLatency(QByteArray, double)), _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2553 connect(thread, SIGNAL(newLatency(QByteArray, double)), _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2554 break;
2555 }
2556 }
2557 }
2558}
2559
2560//
2561////////////////////////////////////////////////////////////////////////////
2562void bncWindow::CreateMenu() {
2563 // Create Menus
2564 // ------------
2565 _menuFile = menuBar()->addMenu(tr("&File"));
2566 _menuFile->addAction(_actFontSel);
2567 _menuFile->addSeparator();
2568 _menuFile->addAction(_actSaveOpt);
2569 _menuFile->addSeparator();
2570 _menuFile->addAction(_actQuit);
2571
2572 _menuHlp = menuBar()->addMenu(tr("&Help"));
2573 _menuHlp->addAction(_actHelp);
2574 _menuHlp->addAction(_actFlowchart);
2575 _menuHlp->addAction(_actAbout);
2576}
2577
2578// Toolbar
2579////////////////////////////////////////////////////////////////////////////
2580void bncWindow::AddToolbar() {
2581 QToolBar* toolBar = new QToolBar;
2582 addToolBar(Qt::BottomToolBarArea, toolBar);
2583 toolBar->setMovable(false);
2584 toolBar->addAction(_actAddMountPoints);
2585 toolBar->addAction(_actDeleteMountPoints);
2586 toolBar->addAction(_actMapMountPoints);
2587 toolBar->addAction(_actStart);
2588 toolBar->addAction(_actStop);
2589 toolBar->addWidget(new QLabel(" "));
2590 toolBar->addAction(_actwhatsthis);
2591}
2592
2593// About
2594////////////////////////////////////////////////////////////////////////////
2595bncAboutDlg::bncAboutDlg(QWidget* parent) :
2596 QDialog(parent) {
2597
2598 QTextBrowser* tb = new QTextBrowser;
2599 QUrl url = QUrl::fromLocalFile(":/bncabout.html");
2600 tb->setSource(url);
2601 tb->setReadOnly(true);
2602
2603 int ww = QFontMetrics(font()).horizontalAdvance('w');
2604 QPushButton* _closeButton = new QPushButton("Close");
2605 _closeButton->setMaximumWidth(10*ww);
2606 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2607
2608 QGridLayout* dlgLayout = new QGridLayout();
2609 QLabel* img = new QLabel();
2610 img->setPixmap(QPixmap(":ntrip-logo.png"));
2611 dlgLayout->addWidget(img, 0,0);
2612 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version " BNCVERSION), 0,1);
2613 dlgLayout->addWidget(tb,1,0,1,2);
2614 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2615
2616 setLayout(dlgLayout);
2617 resize(60*ww, 60*ww);
2618 setWindowTitle("About BNC");
2619 show();
2620}
2621
2622//
2623////////////////////////////////////////////////////////////////////////////
2624bncAboutDlg::~bncAboutDlg() {
2625
2626};
2627
2628// Flowchart
2629////////////////////////////////////////////////////////////////////////////
2630bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2631 QDialog(parent) {
2632
2633 int ww = QFontMetrics(font()).horizontalAdvance('w');
2634 QPushButton* _closeButton = new QPushButton("Close");
2635 _closeButton->setMaximumWidth(10*ww);
2636 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2637
2638 QGridLayout* dlgLayout = new QGridLayout();
2639 QLabel* img = new QLabel();
2640 img->setPixmap(QPixmap(":bncflowchart.png"));
2641 dlgLayout->addWidget(img, 0,0);
2642 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2643
2644 setLayout(dlgLayout);
2645 setWindowTitle("Flow Chart");
2646 show();
2647}
2648
2649//
2650////////////////////////////////////////////////////////////////////////////
2651bncFlowchartDlg::~bncFlowchartDlg() {
2652};
2653
2654// Enable/Disable Widget (and change its color)
2655////////////////////////////////////////////////////////////////////////////
2656void bncWindow::enableWidget(bool enable, QWidget* widget) {
2657
2658 const static QPalette paletteWhite(QColor(255, 255, 255));
2659 const static QPalette paletteGray(QColor(230, 230, 230));
2660
2661 widget->setEnabled(enable);
2662 if (enable) {
2663 widget->setPalette(paletteWhite);
2664 }
2665 else {
2666 widget->setPalette(paletteGray);
2667 }
2668}
2669
2670// Bnc Text
2671////////////////////////////////////////////////////////////////////////////
2672void bncWindow::slotBncTextChanged(){
2673
2674 const static QPalette paletteWhite(QColor(255, 255, 255));
2675 const static QPalette paletteGray(QColor(230, 230, 230));
2676
2677 bool enable = true;
2678
2679 // Proxy
2680 //------
2681 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2682 enable = !_proxyHostLineEdit->text().isEmpty();
2683 enableWidget(enable, _proxyPortLineEdit);
2684 }
2685
2686 // RINEX Observations
2687 // ------------------
2688 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2689 enable = !_rnxPathLineEdit->text().isEmpty();
2690 enableWidget(enable, _rnxIntrComboBox);
2691 enableWidget(enable, _rnxSamplComboBox);
2692 enableWidget(enable, _rnxSkelExtComboBox);
2693 enableWidget(enable, _rnxSkelPathLineEdit);
2694 enableWidget(enable, _rnxFileCheckBox);
2695 enableWidget(enable, _rnxScrpLineEdit);
2696 enableWidget(enable, _rnxV2Priority);
2697 enableWidget(enable, _rnxVersComboBox);
2698
2699 bool enable1 = true;
2700 enable1 = _rnxVersComboBox->currentText() == "2";
2701 if (enable && enable1) {
2702 enableWidget(true, _rnxV2Priority);
2703 }
2704 if (enable && !enable1) {
2705 enableWidget(false, _rnxV2Priority);
2706 }
2707 }
2708
2709 // RINEX Observations, Signal Priority
2710 // -----------------------------------
2711 if (sender() == 0 || sender() == _rnxVersComboBox) {
2712 if (!_rnxPathLineEdit->text().isEmpty()) {
2713 enableWidget(enable, _rnxIntrComboBox);
2714 enable = _rnxVersComboBox->currentText() == "2";
2715 enableWidget(enable, _rnxV2Priority);
2716 }
2717 }
2718
2719 // RINEX Ephemeris
2720 // ---------------
2721 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2722 enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2723 enableWidget(enable, _ephIntrComboBox);
2724 enableWidget(enable, _ephVersComboBox);
2725 //enableWidget(enable, _ephVersComboBox);
2726 //enableWidget(enable, _ephFilePerStation);
2727 }
2728
2729 // Broadcast Corrections
2730 // ---------------------
2731 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2732 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2733 enableWidget(enable, _corrIntrComboBox);
2734 }
2735
2736 // Feed Engine
2737 // -----------
2738 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2739 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2740 enableWidget(enable, _outWaitSpinBox);
2741 enableWidget(enable, _outSamplComboBox);
2742 }
2743
2744 // Serial Output
2745 // -------------
2746 if (sender() == 0 ||
2747 sender() == _serialMountPointLineEdit ||
2748 sender() == _serialAutoNMEAComboBox) {
2749 enable = !_serialMountPointLineEdit->text().isEmpty();
2750 enableWidget(enable, _serialPortNameLineEdit);
2751 enableWidget(enable, _serialBaudRateComboBox);
2752 enableWidget(enable, _serialParityComboBox);
2753 enableWidget(enable, _serialDataBitsComboBox);
2754 enableWidget(enable, _serialStopBitsComboBox);
2755 enableWidget(enable, _serialFlowControlComboBox);
2756 enableWidget(enable, _serialAutoNMEAComboBox);
2757 if (enable && _serialAutoNMEAComboBox->currentText() == "Auto") {
2758 enableWidget(true, _serialFileNMEALineEdit);
2759 enableWidget(false, _serialHeightNMEALineEdit);
2760 enableWidget(true, _serialNMEASamplingSpinBox);
2761 }
2762 else if (enable && _serialAutoNMEAComboBox->currentText().contains("Manual")) {
2763 enableWidget(false, _serialFileNMEALineEdit);
2764 enableWidget(true, _serialHeightNMEALineEdit);
2765 enableWidget(true, _serialNMEASamplingSpinBox);
2766 }
2767 else {
2768 enableWidget(false, _serialFileNMEALineEdit);
2769 enableWidget(false, _serialHeightNMEALineEdit);
2770 enableWidget(false, _serialNMEASamplingSpinBox);
2771 }
2772 }
2773
2774 // Outages
2775 // -------
2776 if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2777 enable = !_adviseObsRateComboBox->currentText().isEmpty();
2778 enableWidget(enable, _adviseFailSpinBox);
2779 enableWidget(enable, _adviseRecoSpinBox);
2780 enableWidget(enable, _adviseScriptLineEdit);
2781 }
2782
2783 // Miscellaneous
2784 // -------------
2785 if (sender() == 0 || sender() == _miscMountLineEdit) {
2786 enable = !_miscMountLineEdit->text().isEmpty();
2787 enableWidget(enable, _miscIntrComboBox);
2788 enableWidget(enable, _miscScanRTCMCheckBox);
2789 enableWidget(enable, _miscPortLineEdit);
2790 }
2791
2792 // Combine Corrections
2793 // -------------------
2794 if (sender() == 0 || sender() == _cmbTable) {
2795 int iRow = _cmbTable->rowCount();
2796 if (iRow > 0) {
2797 enableWidget(true, _cmbMethodComboBox);
2798 enableWidget(true, _cmbMaxresLineEdit);
2799 enableWidget(true, _cmbMaxdisplacementLineEdit);
2800 enableWidget(true, _cmbSamplSpinBox);
2801 enableWidget(true, _cmbLogPath);
2802 enableWidget(true, _cmbGpsCheckBox);
2803 enableWidget(true, _cmbGloCheckBox);
2804 enableWidget(true, _cmbGalCheckBox);
2805 enableWidget(true, _cmbBdsCheckBox);
2806 enableWidget(true, _cmbQzssCheckBox);
2807 enableWidget(true, _cmbSbasCheckBox);
2808 enableWidget(true, _cmbIrnssCheckBox);
2809 enableWidget(true, _cmbBsxFile);
2810 }
2811 else {
2812 enableWidget(false, _cmbMethodComboBox);
2813 enableWidget(false, _cmbMaxresLineEdit);
2814 enableWidget(false, _cmbMaxdisplacementLineEdit);
2815 enableWidget(false, _cmbSamplSpinBox);
2816 enableWidget(false, _cmbLogPath);
2817 enableWidget(false, _cmbGpsCheckBox);
2818 enableWidget(false, _cmbGloCheckBox);
2819 enableWidget(false, _cmbGalCheckBox);
2820 enableWidget(false, _cmbBdsCheckBox);
2821 enableWidget(false, _cmbQzssCheckBox);
2822 enableWidget(false, _cmbSbasCheckBox);
2823 enableWidget(false, _cmbIrnssCheckBox);
2824 enableWidget(false, _cmbBsxFile);
2825 }
2826 }
2827
2828 // Upload(clk)
2829 // -----------
2830 int iRow = _uploadTable->rowCount();
2831 if (iRow > 0) {
2832 enableWidget(true, _uploadIntrComboBox);
2833 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2834 enableWidget(true, _uploadSamplClkRnxSpinBox);
2835 enableWidget(true, _uploadSamplBiaSnxSpinBox);
2836 enableWidget(true, _uploadSamplSp3ComboBox);
2837 enableWidget(true, _uploadAntexFile);
2838 }
2839 else {
2840 enableWidget(false, _uploadIntrComboBox);
2841 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2842 enableWidget(false, _uploadSamplClkRnxSpinBox);
2843 enableWidget(false, _uploadSamplBiaSnxSpinBox);
2844 enableWidget(false, _uploadSamplSp3ComboBox);
2845 enableWidget(false, _uploadAntexFile);
2846 }
2847
2848 // Upload(eph)
2849 // -----------
2850 iRow = _uploadEphTable->rowCount();
2851 if (iRow > 0) {
2852 enableWidget(true, _uploadSamplRtcmEphSpinBox);
2853 }
2854 else {
2855 enableWidget(false, _uploadSamplRtcmEphSpinBox);
2856 }
2857
2858 // QC
2859 // --
2860 if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2861 enable = !_reqcActionComboBox->currentText().isEmpty();
2862 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2863// bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2864 enableWidget(enable, _reqcObsFileChooser);
2865 enableWidget(enable, _reqcNavFileChooser);
2866 enableWidget(enable, _reqcOutLogLineEdit);
2867 enableWidget(enable && enable10, _reqcEditOptionButton);
2868 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2869 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2870 enableWidget(enable && !enable10, _reqcLogSummaryOnly);
2871 enableWidget(enable && !enable10, _reqcSkyPlotSignals);
2872// enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2873 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2874 }
2875
2876 // SP3 File Comparison
2877 // -------------------
2878 if (sender() == 0 || sender() == _sp3CompFileChooser) {
2879 enable = !_sp3CompFileChooser->fileName().isEmpty();
2880 enableWidget(enable, _sp3CompLogLineEdit);
2881 enableWidget(enable, _sp3CompExclude);
2882 enableWidget(enable, _sp3CompSummaryOnly);
2883 }
2884
2885 enableStartStop();
2886}
2887
2888//
2889////////////////////////////////////////////////////////////////////////////
2890void bncWindow::slotAddCmbRow() {
2891 int iRow = _cmbTable->rowCount();
2892 _cmbTable->insertRow(iRow);
2893 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2894 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2895 }
2896}
2897
2898//
2899////////////////////////////////////////////////////////////////////////////
2900void bncWindow::slotDelCmbRow() {
2901
2902 const static QPalette paletteWhite(QColor(255, 255, 255));
2903 const static QPalette paletteGray(QColor(230, 230, 230));
2904
2905 int nRows = _cmbTable->rowCount();
2906 std::vector <bool> flg(nRows);
2907 for (int iRow = 0; iRow < nRows; iRow++) {
2908 if (_cmbTable->item(iRow,1)->isSelected()) {
2909 flg[iRow] = true;
2910 }
2911 else {
2912 flg[iRow] = false;
2913 }
2914 }
2915 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2916 if (flg[iRow]) {
2917 _cmbTable->removeRow(iRow);
2918 }
2919 }
2920 nRows = _cmbTable->rowCount();
2921 if (nRows < 1) {
2922 enableWidget(false, _cmbMethodComboBox);
2923 enableWidget(false, _cmbMaxresLineEdit);
2924 enableWidget(false, _cmbMaxdisplacementLineEdit);
2925 enableWidget(false, _cmbSamplSpinBox);
2926 enableWidget(false, _cmbLogPath);
2927 }
2928}
2929
2930//
2931////////////////////////////////////////////////////////////////////////////
2932void bncWindow::populateCmbTable() {
2933
2934 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2935 _cmbTable->removeRow(iRow);
2936 }
2937
2938 bncSettings settings;
2939
2940 int iRow = -1;
2941 QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2942 while (it.hasNext()) {
2943 QStringList hlp = it.next().split(" ");
2944 if (hlp.size() > 2) {
2945 ++iRow;
2946 _cmbTable->insertRow(iRow);
2947 }
2948 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2949 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2950 }
2951 }
2952}
2953
2954//
2955////////////////////////////////////////////////////////////////////////////
2956void bncWindow::slotAddUploadRow() {
2957 int iRow = _uploadTable->rowCount();
2958 _uploadTable->insertRow(iRow);
2959 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2960 if (iCol == 3) {
2961 QComboBox* ntripversion = new QComboBox();
2962 ntripversion->setEditable(false);
2963 ntripversion->addItems(QString("1,2,2s").split(","));
2964 ntripversion->setFrame(false);
2965 _uploadTable->setCellWidget(iRow, iCol, ntripversion);
2966
2967 }
2968 else if (iCol == 4) {
2969 QLineEdit* user = new QLineEdit();
2970 user->setFrame(false);
2971 _uploadTable->setCellWidget(iRow, iCol, user);
2972 }
2973 else if (iCol == 5) {
2974 QLineEdit* passwd = new QLineEdit();
2975 passwd->setFrame(false);
2976 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2977 _uploadTable->setCellWidget(iRow, iCol, passwd);
2978 }
2979 else if (iCol == 6) {
2980 QComboBox* system = new QComboBox();
2981 system->setEditable(false);
2982 system->addItems(QString("IGS20,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2983 system->setFrame(false);
2984 _uploadTable->setCellWidget(iRow, iCol, system);
2985 }
2986 else if (iCol == 7) {
2987 QComboBox* format = new QComboBox();
2988 format->setEditable(false);
2989 format->addItems(QString("IGS-SSR,RTCM-SSR").split(","));
2990 format->setFrame(false);
2991 _uploadTable->setCellWidget(iRow, iCol, format);
2992 }
2993 else if (iCol == 8) {
2994 QCheckBox* com = new QCheckBox();
2995 _uploadTable->setCellWidget(iRow, iCol, com);
2996 }
2997 else if (iCol == 15) {
2998 bncTableItem* bncIt = new bncTableItem();
2999 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
3000 _uploadTable->setItem(iRow, iCol, bncIt);
3001 BNC_CORE->_uploadTableItems[iRow] = bncIt;
3002 }
3003 else {
3004 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
3005 }
3006 }
3007}
3008
3009//
3010////////////////////////////////////////////////////////////////////////////
3011void bncWindow::slotDelUploadRow() {
3012 BNC_CORE->_uploadTableItems.clear();
3013 int nRows = _uploadTable->rowCount();
3014 std::vector <bool> flg(nRows);
3015 for (int iRow = 0; iRow < nRows; iRow++) {
3016 if (_uploadTable->item(iRow,1)->isSelected()) {
3017 flg[iRow] = true;
3018 }
3019 else {
3020 flg[iRow] = false;
3021 }
3022 }
3023 for (int iRow = nRows-1; iRow >= 0; iRow--) {
3024 if (flg[iRow]) {
3025 _uploadTable->removeRow(iRow);
3026 }
3027 }
3028 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
3029 BNC_CORE->_uploadTableItems[iRow] =
3030 (bncTableItem*) _uploadTable->item(iRow, 14);
3031 }
3032 nRows = _uploadTable->rowCount();
3033 if (nRows < 1) {
3034 enableWidget(false, _uploadIntrComboBox);
3035 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
3036 enableWidget(false, _uploadSamplSp3ComboBox);
3037 enableWidget(false, _uploadSamplClkRnxSpinBox);
3038 enableWidget(false, _uploadAntexFile);
3039 }
3040}
3041
3042//
3043////////////////////////////////////////////////////////////////////////////
3044void bncWindow::populateUploadTable() {
3045 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
3046 _uploadTable->removeRow(iRow);
3047 }
3048
3049 bncSettings settings;
3050
3051 int iRow = -1;
3052 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
3053
3054 while (it.hasNext()) {
3055 QStringList hlp = it.next().split(",");
3056 if (hlp.size() > 6) {
3057 ++iRow;
3058 _uploadTable->insertRow(iRow);
3059 }
3060 for (int iCol = 0; iCol < hlp.size(); iCol++) {
3061 if (iCol == 3) {
3062 QComboBox* ntripversion = new QComboBox();
3063 ntripversion->setEditable(false);
3064 ntripversion->addItems(QString("1,2,2s").split(","));
3065 ntripversion->setFrame(false);
3066 ntripversion->setCurrentIndex(ntripversion->findText(hlp[iCol]));
3067 _uploadTable->setCellWidget(iRow, iCol, ntripversion);
3068 }
3069 else if (iCol == 4) {
3070 QLineEdit* user = new QLineEdit();
3071 user->setFrame(false);
3072 user->setText(hlp[iCol]);
3073 _uploadTable->setCellWidget(iRow, iCol, user);
3074 }
3075 else if (iCol == 5) {
3076 QLineEdit* passwd = new QLineEdit();
3077 passwd->setFrame(false);
3078 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
3079 passwd->setText(hlp[iCol]);
3080 _uploadTable->setCellWidget(iRow, iCol, passwd);
3081 }
3082 else if (iCol == 6) {
3083 QComboBox* system = new QComboBox();
3084 system->setEditable(false);
3085 system->addItems(QString("IGS20,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
3086 system->setFrame(false);
3087 system->setCurrentIndex(system->findText(hlp[iCol]));
3088 _uploadTable->setCellWidget(iRow, iCol, system);
3089 }
3090 else if (iCol == 7) {
3091 QComboBox* format = new QComboBox();
3092 format->setEditable(false);
3093 format->addItems(QString("IGS-SSR,RTCM-SSR").split(","));
3094 format->setFrame(false);
3095 format->setCurrentIndex(format->findText(hlp[iCol]));
3096 _uploadTable->setCellWidget(iRow, iCol, format);
3097 }
3098 else if (iCol == 8) {
3099 QCheckBox* com = new QCheckBox();
3100 if (hlp[iCol].toInt() == Qt::Checked) {
3101 com->setCheckState(Qt::Checked);
3102 }
3103 _uploadTable->setCellWidget(iRow, iCol, com);
3104 }
3105 else if (iCol == 15) {
3106 bncTableItem* bncIt = new bncTableItem();
3107 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
3108 _uploadTable->setItem(iRow, iCol, bncIt);
3109 BNC_CORE->_uploadTableItems[iRow] = bncIt;
3110 }
3111 else {
3112 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
3113 }
3114 }
3115 }
3116}
3117
3118//
3119////////////////////////////////////////////////////////////////////////////
3120void bncWindow::slotSetUploadTrafo() {
3121 bncCustomTrafo* dlg = new bncCustomTrafo(this);
3122 dlg->exec();
3123 delete dlg;
3124}
3125
3126//
3127////////////////////////////////////////////////////////////////////////////
3128void bncWindow::slotAddUploadEphRow() {
3129 int iRow = _uploadEphTable->rowCount();
3130 _uploadEphTable->insertRow(iRow);
3131 for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
3132 if (iCol == 3) {
3133 QComboBox* ntripversion = new QComboBox();
3134 ntripversion->setEditable(false);
3135 ntripversion->addItems(QString("1,2,2s").split(","));
3136 ntripversion->setFrame(false);
3137 _uploadEphTable->setCellWidget(iRow, iCol, ntripversion);
3138
3139 }
3140 else if (iCol == 4) {
3141 QLineEdit* user = new QLineEdit();
3142 user->setFrame(false);
3143 _uploadEphTable->setCellWidget(iRow, iCol, user);
3144 }
3145 else if (iCol == 5) {
3146 QLineEdit* passwd = new QLineEdit();
3147 passwd->setFrame(false);
3148 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
3149 _uploadEphTable->setCellWidget(iRow, iCol, passwd);
3150 }
3151 else if (iCol == 6) {
3152 QLineEdit* system = new QLineEdit("GREC");
3153 system->setFrame(false);
3154 _uploadEphTable->setCellWidget(iRow, iCol, system);
3155 }
3156 else if (iCol == 7) {
3157 bncTableItem* bncIt = new bncTableItem();
3158 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
3159 _uploadEphTable->setItem(iRow, iCol, bncIt);
3160 BNC_CORE->_uploadEphTableItems[iRow] = bncIt;
3161 }
3162 else {
3163 _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(""));
3164 }
3165 }
3166}
3167
3168//
3169////////////////////////////////////////////////////////////////////////////
3170void bncWindow::slotDelUploadEphRow() {
3171 BNC_CORE->_uploadTableItems.clear();
3172 int nRows = _uploadEphTable->rowCount();
3173 std::vector <bool> flg(nRows);
3174 for (int iRow = 0; iRow < nRows; iRow++) {
3175 if (_uploadEphTable->item(iRow,1)->isSelected()) {
3176 flg[iRow] = true;
3177 }
3178 else {
3179 flg[iRow] = false;
3180 }
3181 }
3182 for (int iRow = nRows-1; iRow >= 0; iRow--) {
3183 if (flg[iRow]) {
3184 _uploadEphTable->removeRow(iRow);
3185 }
3186 }
3187 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
3188 BNC_CORE->_uploadTableItems[iRow] =
3189 (bncTableItem*) _uploadEphTable->item(iRow, 7);
3190 }
3191 nRows = _uploadEphTable->rowCount();
3192 if (nRows < 1) {
3193 enableWidget(false, _uploadSamplRtcmEphSpinBox);
3194 }
3195}
3196
3197//
3198////////////////////////////////////////////////////////////////////////////
3199void bncWindow::populateUploadEphTable() {
3200 for (int iRow = _uploadEphTable->rowCount()-1; iRow >=0; iRow--) {
3201 _uploadEphTable->removeRow(iRow);
3202 }
3203
3204 bncSettings settings;
3205
3206 int iRow = -1;
3207 QListIterator<QString> it(settings.value("uploadEphMountpointsOut").toStringList());
3208 while (it.hasNext()) {
3209 QStringList hlp = it.next().split(",");
3210 if (hlp.size() > 6) {
3211 ++iRow;
3212 _uploadEphTable->insertRow(iRow);
3213 }
3214 for (int iCol = 0; iCol < hlp.size(); iCol++) {
3215 if (iCol == 3) {
3216 QComboBox* ntripversion = new QComboBox();
3217 ntripversion->setEditable(false);
3218 ntripversion->addItems(QString("1,2,2s").split(","));
3219 ntripversion->setFrame(false);
3220 ntripversion->setCurrentIndex(ntripversion->findText(hlp[iCol]));
3221 _uploadEphTable->setCellWidget(iRow, iCol, ntripversion);
3222 }
3223 else if (iCol == 4) {
3224 QLineEdit* user = new QLineEdit();
3225 user->setFrame(false);
3226 user->setText(hlp[iCol]);
3227 _uploadEphTable->setCellWidget(iRow, iCol, user);
3228 }
3229 else if (iCol == 5) {
3230 QLineEdit* passwd = new QLineEdit();
3231 passwd->setFrame(false);
3232 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
3233 passwd->setText(hlp[iCol]);
3234 _uploadEphTable->setCellWidget(iRow, iCol, passwd);
3235 }
3236 else if (iCol == 6) {
3237 QLineEdit* system = new QLineEdit();
3238 system->setFrame(false);
3239 system->setText(hlp[iCol]);
3240 _uploadEphTable->setCellWidget(iRow, iCol, system);
3241 }
3242 else if (iCol == 7) {
3243 bncTableItem* bncIt = new bncTableItem();
3244 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
3245 _uploadEphTable->setItem(iRow, iCol, bncIt);
3246 BNC_CORE->_uploadEphTableItems[iRow] = bncIt;
3247 }
3248 else {
3249 _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
3250 }
3251 }
3252 }
3253}
3254
3255
3256// Progress Bar Change
3257////////////////////////////////////////////////////////////////////////////
3258void bncWindow::slotPostProcessingProgress(int nEpo) {
3259 _actStart->setText(QString("%1 Epochs").arg(nEpo));
3260}
3261
3262// Post-Processing Reqc Finished
3263////////////////////////////////////////////////////////////////////////////
3264void bncWindow::slotPostProcessingFinished() {
3265 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
3266 _runningPPP = false;
3267 _runningEdit = false;
3268 _runningQC = false;
3269 _runningSp3Comp = false;
3270 _actStart->setText(tr("Sta&rt"));
3271 enableStartStop();
3272}
3273
3274// Edit teqc-like editing options
3275////////////////////////////////////////////////////////////////////////////
3276void bncWindow::slotReqcEditOption() {
3277 saveOptions();
3278 reqcDlg* dlg = new reqcDlg(this);
3279 dlg->move(this->pos().x()+50, this->pos().y()+50);
3280 dlg->exec();
3281 delete dlg;
3282}
3283
3284// Enable/Disable Start and Stop Buttons
3285////////////////////////////////////////////////////////////////////////////
3286void bncWindow::enableStartStop() {
3287
3288 if ( running() ) {
3289 _actStart->setEnabled(false);
3290 if (_runningRealTime || _runningPPP) {
3291 _actStop->setEnabled(true);
3292 }
3293 }
3294 else {
3295 _actStart->setEnabled(true);
3296 _actStop->setEnabled(false);
3297 }
3298}
3299
3300// Show Map
3301////////////////////////////////////////////////////////////////////////////
3302void bncWindow::slotMapMountPoints() {
3303 saveOptions();
3304 t_bncMap* bncMap = new t_bncMap(this);
3305 bncMap->setMinimumSize(800, 600);
3306 bncMap->setWindowTitle("Selected Mountpoints");
3307
3308 bncSettings settings;
3309 QListIterator<QString> it(settings.value("mountPoints").toStringList());
3310 while (it.hasNext()) {
3311 QStringList hlp = it.next().split(" ");
3312 if (hlp.size() < 5) continue;
3313 QUrl url(hlp[0]);
3314 double latDeg = hlp[3].toDouble();
3315 double lonDeg = hlp[4].toDouble();
3316 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
3317 }
3318
3319 bncMap->show();
3320}
3321
3322// Show Map
3323////////////////////////////////////////////////////////////////////////////
3324void bncWindow::slotMapPPP() {
3325#ifdef QT_WEBENGINE
3326 saveOptions();
3327 enableWidget(false, _pppWidgets._mapWinButton);
3328 enableWidget(false, _pppWidgets._mapWinDotSize);
3329 enableWidget(false, _pppWidgets._mapWinDotColor);
3330
3331 if (!_mapWin) {
3332 _mapWin = new bncMapWin(this);
3333 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
3334 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
3335 _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
3336 }
3337 _mapWin->show();
3338#else
3339 QMessageBox::information(this, "Information",
3340 "Qt Library compiled without QT_WEBENGINE");
3341#endif
3342}
3343
3344// Show Map
3345////////////////////////////////////////////////////////////////////////////
3346void bncWindow::slotMapPPPClosed() {
3347#ifdef QT_WEBENGINE
3348 enableWidget(true, _pppWidgets._mapWinButton);
3349 enableWidget(true, _pppWidgets._mapWinDotSize);
3350 enableWidget(true, _pppWidgets._mapWinDotColor);
3351 if (_mapWin) {
3352 QListIterator<bncGetThread*> it(_threads);
3353 while (it.hasNext()) {
3354 bncGetThread* thread = it.next();
3355 thread->disconnect(_mapWin);
3356 }
3357 _mapWin->deleteLater();
3358 _mapWin = 0;
3359 }
3360#endif
3361}
Note: See TracBrowser for help on using the repository browser.