// Part of BNC, a utility for retrieving decoding and // converting GNSS data streams from NTRIP broadcasters. // // Copyright (C) 2009 // German Federal Agency for Cartography and Geodesy (BKG) // http://www.bkg.bund.de // Czech Technical University Prague, Department of Geodesy // http://www.fsv.cvut.cz // // Email: euref-ip@bkg.bund.de // // This program is free software; you can redistribute it and/or // modify it under the terms of the GNU General Public License // as published by the Free Software Foundation, version 2. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program; if not, write to the Free Software // Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. /* ------------------------------------------------------------------------- * BKG NTRIP Client * ------------------------------------------------------------------------- * * Class: bncSerialPort * * Purpose: Select serial port for stream retrieval * * Author: G. Weber * * Created: 18-Feb-2009 * * Changes: * * -----------------------------------------------------------------------*/ #include #include #include #include #include #include #include #include "bncserialport.h" using namespace std; // Constructor //////////////////////////////////////////////////////////////////////////// bncSerialPort::bncSerialPort(QWidget* parent) : QDialog(parent) { setMinimumSize(400,150); QVBoxLayout* mainLayout = new QVBoxLayout(this); QGridLayout* editLayout = new QGridLayout; setWindowTitle(tr("Add Stream from Serial Port")); _serialMountpointLineEdit = new QLineEdit(); _serialPortLineEdit = new QLineEdit(); _serialFormatLineEdit = new QLineEdit(); _serialBaudRateComboBox = new QComboBox(); _serialFlowControlComboBox = new QComboBox(); _serialDataBitsComboBox = new QComboBox(); _serialParityComboBox = new QComboBox(); _serialStopBitsComboBox = new QComboBox(); _serialLatLineEdit = new QLineEdit(); _serialLonLineEdit = new QLineEdit(); _serialCountryLineEdit = new QLineEdit(); _serialBaudRateComboBox->addItems(QString("110,300,600," "1200,2400,4800,9600,19200,38400,57600,115200").split(",")); _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(",")); _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(",")); _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(",")); _serialStopBitsComboBox->addItems(QString("1,2").split(",")); _serialBaudRateComboBox->setCurrentIndex(7); _serialDataBitsComboBox->setCurrentIndex(3); int ww = QFontMetrics(font()).width('w'); _serialMountpointLineEdit->setMaximumWidth(11*ww); _serialPortLineEdit->setMaximumWidth(11*ww); _serialBaudRateComboBox->setMaximumWidth(9*ww); _serialFlowControlComboBox->setMaximumWidth(11*ww); _serialDataBitsComboBox->setMaximumWidth(5*ww); _serialParityComboBox->setMaximumWidth(9*ww); _serialStopBitsComboBox->setMaximumWidth(5*ww); _serialLatLineEdit->setMaximumWidth(11*ww); _serialLonLineEdit->setMaximumWidth(9*ww); _serialFormatLineEdit->setMaximumWidth(9*ww); _serialCountryLineEdit->setMaximumWidth(11*ww); // WhatsThis, Add Stream from Serial Port // -------------------------------------- _serialMountpointLineEdit->setWhatsThis(tr("

BNC allows to retrieve streams via serial port without using the Ntrip transport protocol.

Specify a mountpoint. Recommended is a 9-character station ID.
Example: FFMJ01DEU

")); _serialFormatLineEdit->setWhatsThis(tr("

Specify the stream format.

Available options are 'RTCM_2', 'RTCM_3', 'RTNET', and 'ZERO'.

")); _serialLatLineEdit->setWhatsThis(tr("

Enter the approximate latitude of the stream providing receiver in degrees.

Example: 45.32

")); _serialLonLineEdit->setWhatsThis(tr("

Enter the approximate latitude of the stream providing receiver in degrees.

Example: 45.32

")); _serialCountryLineEdit->setWhatsThis(tr("

Specify the country code.

Follow the ISO 3166-1 alpha-3a code.
Example, Germany: DEU

")); _serialPortLineEdit->setWhatsThis(tr("

Enter the serial 'Port name' selected for communication with your serial connected device. Valid port names are

Windows:       COM1, COM2
Linux:         /dev/ttyS0, /dev/ttyS1
FreeBSD:       /dev/ttyd0, /dev/ttyd1
Digital Unix:  /dev/tty01, /dev/tty02
HP-UX:         /dev/tty1p0, /dev/tty2p0
SGI/IRIX:      /dev/ttyf1, /dev/ttyf2
SunOS/Solaris: /dev/ttya, /dev/ttyb

You must plug a serial cable in the port defined here before you start BNC.

")); _serialBaudRateComboBox->setWhatsThis(tr("

Select a 'Baud rate' for the serial input link.

Your selection must equal the baud rate configured to the serial connected device. Note that using a high baud rate is recommended.

")); _serialDataBitsComboBox->setWhatsThis(tr("

Select the number of 'Data bits' for the serial input link.

Your selection must equal the number of data bits configured to the serial connected device. Note that often 8 data bits are used.

")); _serialParityComboBox->setWhatsThis(tr("

Select the 'Parity' for the serial input link.

Your selection must equal the parity selection configured to the serial connected device. Note that parity is often set to 'NONE'.

")); _serialStopBitsComboBox->setWhatsThis(tr("

Select the number of 'Stop bits' for the serial input link.

Your selection must equal the number of stop bits configured to the serial connected device. Note that often 1 stop bit is used.

")); _serialFlowControlComboBox->setWhatsThis(tr("

Select a 'Flow control' for the serial input link.

Your selection must equal the flow control configured to the serial connected device. Select 'OFF' if you don't know better.

")); editLayout->addWidget(new QLabel(tr("Mountpoint")), 0, 0, Qt::AlignRight); editLayout->addWidget(_serialMountpointLineEdit, 0, 1); editLayout->addWidget(new QLabel(tr("Format")), 0, 2, Qt::AlignRight); editLayout->addWidget(_serialFormatLineEdit, 0, 3); editLayout->addWidget(new QLabel(tr("Latitude")), 1, 0, Qt::AlignRight); editLayout->addWidget(_serialLatLineEdit, 1, 1); editLayout->addWidget(new QLabel(tr("Longitude")), 1, 2, Qt::AlignRight); editLayout->addWidget(_serialLonLineEdit, 1, 3); editLayout->addWidget(new QLabel(tr("Country")), 2, 0, Qt::AlignRight); editLayout->addWidget(_serialCountryLineEdit, 2, 1); editLayout->addWidget(new QLabel(tr("Port name")), 3, 0, Qt::AlignRight); editLayout->addWidget(_serialPortLineEdit, 3, 1); editLayout->addWidget(new QLabel(tr("Baud rate")), 3, 2, Qt::AlignRight); editLayout->addWidget(_serialBaudRateComboBox, 3, 3); editLayout->addWidget(new QLabel(tr("Data bits")), 4, 0, Qt::AlignRight); editLayout->addWidget(_serialDataBitsComboBox, 4, 1); editLayout->addWidget(new QLabel(tr("Parity")), 4, 2, Qt::AlignRight); editLayout->addWidget(_serialParityComboBox, 4, 3); editLayout->addWidget(new QLabel(tr("Stop bits")), 5, 0, Qt::AlignRight); editLayout->addWidget(_serialStopBitsComboBox, 5, 1); editLayout->addWidget(new QLabel(tr("Flow control")),5, 2, Qt::AlignRight); editLayout->addWidget(_serialFlowControlComboBox, 5, 3); mainLayout->addLayout(editLayout); _buttonWhatsThis = new QPushButton(tr("Help=Shift+F1"), this); connect(_buttonWhatsThis, SIGNAL(clicked()), this, SLOT(slotWhatsThis())); _buttonCancel = new QPushButton(tr("Cancel"), this); connect(_buttonCancel, SIGNAL(clicked()), this, SLOT(reject())); _buttonOK = new QPushButton(tr("OK"), this); connect(_buttonOK, SIGNAL(clicked()), this, SLOT(accept())); _buttonOK->setDefault(true); QHBoxLayout* buttonLayout = new QHBoxLayout; buttonLayout->addWidget(_buttonWhatsThis); buttonLayout->addStretch(1); buttonLayout->addWidget(_buttonCancel); buttonLayout->addWidget(_buttonOK); mainLayout->addLayout(buttonLayout); } // Destructor //////////////////////////////////////////////////////////////////////////// bncSerialPort::~bncSerialPort() { delete _buttonCancel; delete _buttonOK; delete _buttonWhatsThis; } // Accept slot //////////////////////////////////////////////////////////////////////////// void bncSerialPort::accept() { QStringList* mountPoints = new QStringList; QString _serialBaudRate = _serialBaudRateComboBox->currentText(); QString _serialFlowControl = _serialFlowControlComboBox->currentText(); QString _serialDataBits = _serialDataBitsComboBox->currentText(); QString _serialParity = _serialParityComboBox->currentText(); QString _serialStopBits = _serialStopBitsComboBox->currentText(); if ( !_serialMountpointLineEdit->text().isEmpty() && !_serialPortLineEdit->text().isEmpty() && !_serialFormatLineEdit->text().isEmpty() && !_serialCountryLineEdit->text().isEmpty() && !_serialLatLineEdit->text().isEmpty() && !_serialLonLineEdit->text().isEmpty() ) { mountPoints->push_back("//" + _serialPortLineEdit->text().replace("/","-").replace(QRegExp("^[-]"), "") + "-" + _serialDataBits + "-" + _serialParity + "-" + _serialStopBits + "-" + _serialFlowControl + "-" + _serialBaudRate + "/" + _serialMountpointLineEdit->text() + " " + _serialFormatLineEdit->text() + " " + _serialCountryLineEdit->text() + " " + _serialLatLineEdit->text() + " " + _serialLonLineEdit->text() + " " + "no S"); } else { QMessageBox::warning(this, tr("Warning"), tr("Incomplete settings"), QMessageBox::Ok); } emit newMountPoints(mountPoints); QDialog::accept(); } // Whats This Help void bncSerialPort::slotWhatsThis() { QWhatsThis::enterWhatsThisMode(); }