source: ntrip/trunk/BNC/src/bncserialport.cpp@ 7637

Last change on this file since 7637 was 7230, checked in by stuerze, 10 years ago

country code is considerred during mountpoint setup from tcp port, udp port and serial port
File size: 10.0 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2009
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncSerialPort
30 *
31 * Purpose: Select serial port for stream retrieval
32 *
33 * Author: G. Weber
34 *
35 * Created: 18-Feb-2009
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include "bncserialport.h"
44
45using namespace std;
46
47// Constructor
48////////////////////////////////////////////////////////////////////////////
49bncSerialPort::bncSerialPort(QWidget* parent) : QDialog(parent) {
50
51 setMinimumSize(400,150);
52 QVBoxLayout* mainLayout = new QVBoxLayout(this);
53 QGridLayout* editLayout = new QGridLayout;
54
55 setWindowTitle(tr("Add Stream from Serial Port"));
56
57 _serialMountpointLineEdit = new QLineEdit();
58 _serialPortLineEdit = new QLineEdit();
59 _serialFormatLineEdit = new QLineEdit();
60 _serialBaudRateComboBox = new QComboBox();
61 _serialFlowControlComboBox = new QComboBox();
62 _serialDataBitsComboBox = new QComboBox();
63 _serialParityComboBox = new QComboBox();
64 _serialStopBitsComboBox = new QComboBox();
65 _serialLatLineEdit = new QLineEdit();
66 _serialLonLineEdit = new QLineEdit();
67 _serialCountryLineEdit = new QLineEdit();
68
69 _serialBaudRateComboBox->addItems(QString("110,300,600,"
70 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
71 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
72 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
73 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
74 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
75
76 _serialBaudRateComboBox->setCurrentIndex(7);
77 _serialDataBitsComboBox->setCurrentIndex(3);
78
79 int ww = QFontMetrics(font()).width('w');
80 _serialMountpointLineEdit->setMaximumWidth(11*ww);
81 _serialPortLineEdit->setMaximumWidth(11*ww);
82 _serialBaudRateComboBox->setMaximumWidth(9*ww);
83 _serialFlowControlComboBox->setMaximumWidth(11*ww);
84 _serialDataBitsComboBox->setMaximumWidth(5*ww);
85 _serialParityComboBox->setMaximumWidth(9*ww);
86 _serialStopBitsComboBox->setMaximumWidth(5*ww);
87 _serialLatLineEdit->setMaximumWidth(11*ww);
88 _serialLonLineEdit->setMaximumWidth(9*ww);
89 _serialFormatLineEdit->setMaximumWidth(9*ww);
90 _serialCountryLineEdit->setMaximumWidth(11*ww);
91
92 // WhatsThis
93 // ---------
94 _serialMountpointLineEdit->setWhatsThis(tr("<p>BNC allows to retrieve streams via serial port without using the Ntrip transport protocol.</p><p>Specify a mountpoint. Recommended is a 4-character station ID.<br>Example: FFMJ</p>"));
95 _serialPortLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected device. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
96 _serialFormatLineEdit->setWhatsThis(tr("<p>Specify the stream format.</p><p>Available options are 'RTCM_2', 'RTCM_3', 'RTNET', and 'ZERO'.</p>"));
97 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial input link.</p><p>Note that your selection must equal the baud rate configured to the serial connected device. Note further that using a high baud rate is recommended.</p>"));
98 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial input link.</p><p>Note that your selection must equal the flow control configured to the serial connected device. Select 'OFF' if you don't know better.</p>"));
99 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial input link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected device. Note further that often 8 data bits are used.</p>"));
100 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial input link.</p><p>Note that your selection must equal the parity selection configured to the serial connected device. Note further that parity is often set to 'NONE'.</p>"));
101 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial input link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected device. Note further that often 1 stop bit is used.</p>"));
102 _serialLatLineEdit->setWhatsThis(tr("<p>Enter the approximate latitude of the stream providing receiver in degrees.<p></p>Example: 45.32</p>"));
103 _serialLonLineEdit->setWhatsThis(tr("<p>Enter the approximate latitude of the stream providing receiver in degrees.<p></p>Example: 45.32</p>"));
104 _serialCountryLineEdit->setWhatsThis(tr("<p>Specify the country code.</p><p>Recommended is the ISO 3166-1 alpha-3a code.<br>Example: DEU</p>"));
105
106 editLayout->addWidget(new QLabel(tr("Mountpoint")), 0, 0, Qt::AlignRight);
107 editLayout->addWidget(_serialMountpointLineEdit, 0, 1);
108 editLayout->addWidget(new QLabel(tr("Format")), 0, 2, Qt::AlignRight);
109 editLayout->addWidget(_serialFormatLineEdit, 0, 3);
110 editLayout->addWidget(new QLabel(tr("Latitude")), 1, 0, Qt::AlignRight);
111 editLayout->addWidget(_serialLatLineEdit, 1, 1);
112 editLayout->addWidget(new QLabel(tr("Longitude")), 1, 2, Qt::AlignRight);
113 editLayout->addWidget(_serialLonLineEdit, 1, 3);
114 editLayout->addWidget(new QLabel(tr("Country")), 2, 0, Qt::AlignRight);
115 editLayout->addWidget(_serialCountryLineEdit, 2, 1);
116 editLayout->addWidget(new QLabel(tr("Port name")), 3, 0, Qt::AlignRight);
117 editLayout->addWidget(_serialPortLineEdit, 3, 1);
118 editLayout->addWidget(new QLabel(tr("Baud rate")), 3, 2, Qt::AlignRight);
119 editLayout->addWidget(_serialBaudRateComboBox, 3, 3);
120 editLayout->addWidget(new QLabel(tr("Data bits")), 4, 0, Qt::AlignRight);
121 editLayout->addWidget(_serialDataBitsComboBox, 4, 1);
122 editLayout->addWidget(new QLabel(tr("Parity")), 4, 2, Qt::AlignRight);
123 editLayout->addWidget(_serialParityComboBox, 4, 3);
124 editLayout->addWidget(new QLabel(tr("Stop bits")), 5, 0, Qt::AlignRight);
125 editLayout->addWidget(_serialStopBitsComboBox, 5, 1);
126 editLayout->addWidget(new QLabel(tr("Flow control")),5, 2, Qt::AlignRight);
127 editLayout->addWidget(_serialFlowControlComboBox, 5, 3);
128
129 mainLayout->addLayout(editLayout);
130
131 _buttonWhatsThis = new QPushButton(tr("Help=Shift+F1"), this);
132 connect(_buttonWhatsThis, SIGNAL(clicked()), this, SLOT(slotWhatsThis()));
133
134 _buttonCancel = new QPushButton(tr("Cancel"), this);
135 connect(_buttonCancel, SIGNAL(clicked()), this, SLOT(reject()));
136
137 _buttonOK = new QPushButton(tr("OK"), this);
138 connect(_buttonOK, SIGNAL(clicked()), this, SLOT(accept()));
139
140 _buttonOK->setDefault(true);
141
142 QHBoxLayout* buttonLayout = new QHBoxLayout;
143
144 buttonLayout->addWidget(_buttonWhatsThis);
145 buttonLayout->addStretch(1);
146 buttonLayout->addWidget(_buttonCancel);
147 buttonLayout->addWidget(_buttonOK);
148
149 mainLayout->addLayout(buttonLayout);
150}
151
152// Destructor
153////////////////////////////////////////////////////////////////////////////
154bncSerialPort::~bncSerialPort() {
155 delete _buttonCancel;
156 delete _buttonOK;
157 delete _buttonWhatsThis;
158}
159
160// Accept slot
161////////////////////////////////////////////////////////////////////////////
162void bncSerialPort::accept() {
163
164 QStringList* mountPoints = new QStringList;
165
166 QString _serialBaudRate = _serialBaudRateComboBox->currentText();
167 QString _serialFlowControl = _serialFlowControlComboBox->currentText();
168 QString _serialDataBits = _serialDataBitsComboBox->currentText();
169 QString _serialParity = _serialParityComboBox->currentText();
170 QString _serialStopBits = _serialStopBitsComboBox->currentText();
171
172 if ( !_serialMountpointLineEdit->text().isEmpty() &&
173 !_serialPortLineEdit->text().isEmpty() &&
174 !_serialFormatLineEdit->text().isEmpty() &&
175 !_serialCountryLineEdit->text().isEmpty() &&
176 !_serialLatLineEdit->text().isEmpty() &&
177 !_serialLonLineEdit->text().isEmpty() ) {
178 mountPoints->push_back("//"
179 + _serialPortLineEdit->text().replace("/","-").replace(QRegExp("^[-]"), "") + "-"
180 + _serialDataBits + "-"
181 + _serialParity + "-"
182 + _serialStopBits + "-"
183 + _serialFlowControl + "-"
184 + _serialBaudRate + "/"
185 + _serialMountpointLineEdit->text() + " "
186 + _serialFormatLineEdit->text() + " "
187 + _serialCountryLineEdit->text() + " "
188 + _serialLatLineEdit->text() + " "
189 + _serialLonLineEdit->text() + " "
190 + "no S");
191 } else {
192 QMessageBox::warning(this, tr("Warning"),
193 tr("Incomplete settings"),
194 QMessageBox::Ok);
195 }
196
197 emit newMountPoints(mountPoints);
198
199 QDialog::accept();
200}
201
202// Whats This Help
203void bncSerialPort::slotWhatsThis() {
204QWhatsThis::enterWhatsThisMode();
205}
206
Note: See TracBrowser for help on using the repository browser.