source: ntrip/trunk/BNC/CHANGELOG.md@ 10534

Last change on this file since 10534 was 10466, checked in by stuerze, 7 months ago

changelog updated

File size: 8.6 KB
Line 
1# Changelog
2## 2.13.1 (2024-04-30)
3- FIXED: Health status of Galileo satellites is now determined by the combination of HS, DVS and SISA [(#174)](https://software.rtcm-ntrip.org/ticket/174)
4- FIXED: Bug regarding the reading of the RINEX Version 4 Navigation files
5- FIXED: Bug regarding the flexibel usage of any port in secure mode
6- ADDED: A check in PPP and combination mode if stored ephemerides are still valid [(#176)](https://software.rtcm-ntrip.org/ticket/176)
7- ADDED: A SIGHUP signal to BNC will result into a reload of its configuration file [(#179)](https://software.rtcm-ntrip.org/ticket/179)
8- ADDED: The possibility to exclude satellites or satellite systems for individual ACs from the combination.
9- ADDED: The possibility to ignore orbit corrections from an indiviul AC that differ by more than 'Maximal Orb Displacement' meters from the average of all orbit corrections per satellite.
10- CHANGED: hDOP and vDOP values are computed from the variances of the NEU components of the receiver position estimates
11- CHANGED: Sampling interval for Manual NMEA can be used now in the Auto NMEA option as well [(#122)](https://software.rtcm-ntrip.org/ticket/122)
12
13
14## 2.13.0 (2023-12-01)
15- ADDED: **RINEX Version 4 Support** (in navigation files currently the EPH message type is considered only)
16- ADDED: **PPP Client Upgrade**
17- ADDED: Multi-GNSS-PPP using uncombined code and/or phase data of two frequencies
18- ADDED: Multi-GNSS-PPP using uncombined code and/or phase data of one frequency
19- ADDED: Ionospheric constraints in form of pseudo observations can be added
20- ADDED: **Ntrip Version 2.0 Upload including TLS**
21- ADDED: **Multi-GNSS Satellite Clock Combination**
22- ADDED: Individual code biases will be considered before satellite clocks are combined
23- ADDED: Satellite clock combination result includes code biases
24- ADDED: Ephemerides upload for different systems in parallel
25- ADDED: **Multi-GNSS SP3, Clock RINEX and SINEX Bias** support
26- ADDED: QC multipath analysis for more than two signals
27- ADDED: Transition from Qt4 to **Qt5**
28
29
30## 2.12.19 (2022-04-04)
31- CHANGED: Minimum combination sampling interval
32
33
34## 2.12.18 (2021-09-28)
35- FIXED: Bug in ephemeris check
36- ADDED: Satellite antenna phase center correction
37- CHANGED: Some OSM updates to force https usage and another crossOriginKeyword
38- CHANGED: Signal usage in BDS PPP
39
40
41## 2.12.17 (2021-04-20)
42- FIXED: Bug in SSR GLONASS upload
43- FIXED: Redundant output concerning unhealthy satellites
44- ADDED: One more line with satellite health flags for the GLONASS navigation message as defined in RINEX v. 3.05
45
46
47## 2.12.16 (2021-02-25)
48- FIXED: Bug in IRNSS ephemeris encoding / decoding
49- FIXED: Bug in RTCM3coDecoder regrading SSR format
50- FIXED: Bug regarding consideration of incoming ephemerides
51- FIXED: Bug regarding latency check
52- FIXED: Relativistic effects are adapted with respect to the respective GNSS ICD
53- FIXED: Bug regarding the generation of combined SSR orbit and clock messages
54- FIXED: Bug within ephemeris check
55- ADDED: Check to prevent the same eph data sets with different TOC values
56- CHANGED: A priori coordinates within examples are updated
57- CHANGED: Changes to prevent erroneous ephemeris data sets from usage in combination
58- CHANGED: Small format adaptations regarding latency check
59- CHANGED: Range of MSM messages enlarged to 1237
60- CHANGED: PPP map now with OSM only
61
62
63## 2.12.15 (2020-11-10)
64- FIXED: Cleanup of the example configurations
65- FIXED: Bug regarding long mountpoint names in latency check and latency plots
66- FIXED: Bug in clock rinex header line
67- ADDED: Ephemeris checks and related debugging output
68- ADDED: Check if orbit and clock corrections are out of range
69- CHANGED: Cleanup of the relativistic effects w.r.t. IGS-SSR
70
71## 2.12.14 (2020-09-04)
72- ADDED: Encoding and decoding of IGS-SSR messages
73- ADDED: B2b/7D BDS in signal mapping for MSM
74- CHANGED: IRNSS experimental in official ephemeris message number
75- CHANGED: Lock Time Indicator is replaced by cycle slip counter in feed engine output
76
77## 2.12.13 (2020-06-09)
78- FIXED: QZSS fit Interval is specified as flag in RINEX 3.04
79- CHANGED: BDS SSR IOD is changed from 24 into 8 bit
80- CHANGED: BDS and QZSS SSR signal and tracking mode is adapted
81
82## 2.12.12 (2020-01-21)
83- ADDED: GPS and QZSS fit Interval in hours
84- CHANGED: Epehmeris check
85
86## 2.12.11 (2019-11-08)
87- CHANGED:: Harmonization of RTCM3 Signal ID Mapping and RTCM SSR Signal and Tracking Mode Identifiers for BDS and QZSS
88
89## 2.12.10 (2019-10-02)
90- FIXED: Multiple message indicator in SSR messages
91- FIXED: GLONASS message frame time written into RINEX files
92- ADDED: IRNSS ephemeris support in RTCM3 Encoder
93- ADDED: IRNSS MSM and ephemeris support in RTCM3 Decoder
94- CHANGED: RTCM signal mapping IDs for GLONASS
95- CHANGED: RTCM signal mapping IDs for BDS based on RTCM BDSWG proposal from 9/2019 as far as consistent with RINEX v 3.04
96- CHANGED: Up to 64 BDS prn codes are supported now
97
98
99## 2.12.9 (2019-05-20)
100- FIXED: Method to read the RTNET data buffer
101- FIXED: Typo in rtnet2ssr transition for ssr upload
102- CHANGED: Number of possible phase biases for SSR upload are enlarged to 100
103- CHANGED: Missing phase biases are added within rtnet2ssr transition for ssr upload
104
105
106## 2.12.8 (2019-05-06)
107- FIXED: Bug with respect to GLONASS upload
108- FIXED: Bug in NMEA output
109- CHANGED: Transformation parameters from ITRF2014 into DFREF91
110- CHANGED: Transformation parameters from ITRF2014 into ETRF2000
111- CHANGED: GLONASS ephemerides validity is now up to 2 hours.
112- CHANGED: Check with respect to wrong observation epochs
113
114
115## 2.12.7 (2019-04-03)
116- FIXED: Bug in NMEA checksum
117- FIXED: Bug in RINEX file concatenation
118- FIXED: Bug in RTCM3 ephemeris message for QZSS
119- FIXED: Bug in RTCM3 ephemeris message for BDS and SBAS
120- FIXED: RINEX version 3 filenames for re-sampled files
121- FIXED: Bug in reqc ephemeris check
122- FIXED: Bug in RINEX file concatenation
123- FIXED: Bug in ephemeris upload
124- FIXED: Bug in ephemeris check
125- FIXED: Bug in latency check
126- FIXED: Galileo geocentric gravitational constant is corrected
127- FIXED: Encoding/decoding of all missing parameters in MT 1020
128- FIXED: Bug in RTCM3 MSM Decoder
129- ADDED: Updates regarding RINEX Version 3.04
130- ADDED: Lock time in seconds as an optional feed engine output
131- ADDED: Two more polynomial coefficients of the SSR clock correction message
132- ADDED: One more parameter to describe the SSR URA
133- ADDED: Decoding of receiver descriptor in MT 1033
134- ADDED: Satellite health check
135- ADDED: IRNSS support in RINEX QC
136- CHANGED: Parameters for transformation of orbit and clock corrections from ITRF 2014 into ETRF2000 and DREF91,
137- CHANGED: No updated transformation parameters for NDA83 available, hence deleted
138- CHANGED: Allow 10 Hz observation data processing and re-sampling
139- CHANGED: SSR SBAS and BDS satellite IDs with respect to the proposal
140- CHANGED: Transformation of orbit and clock corrections into ETRF2000, NDA83 or DREF91 is done temporarily via ITRF2008
141
142
143## 2.12.6 (2017-09-26)
144- FIXED:: GPS SSR Orbit IOD has to be GPS IODE, not IODC
145
146## 2.12.5 (2017-08-30)
147- CHANGED: RTCM message number for BDS is updated
148
149## 2.12.4 (2017-04-10)
150- CHANGED: SIRGAS2000 transformation parameters adjusted to IGb14
151- CHANGED: Transformation parameters for ITRF2005 to GDA94 removed
152- CHANGED: Transformation parameters for ITRF2008 to SIRGAS95 removed
153- CHANGED: Transformation parameters for ITRF2014 to GDA2020 added
154
155## 2.12.3 (2016-09-05)
156- FIXED: Check regarding wrong observation epochs is done during latency check as well to prevent erroneous latencies
157- FIXED: Map generation from sourcetable entry
158- FIXED: Re-implementation of the well proven approach (from BNC version 2.11) on how to wait for clock corrections in PPP mode
159- FIXED: Some NMEA components in PPP output: Time stamp is now UTC, hDop value instead pDop value
160- FIXED: RINEX 2.11 ephemeris output for an unknown transmission time
161- ADDED: Number of allowed SSR biases is enlarged,
162 -ADDED: Some future GLONASS signal and tracking mode identifiers
163- ADDED: Data source information as comment within RINEX navigation file header
164- ADDED: Frequency specific signal priorities are for RINEX v3 to RINEX v2 conversion
165- ADDED: Consideration of provider ID changes in SSR streams during PPP analysis
166- CHANGED: Small adaptations in qwtpolar sources to allow a successful compilation of BNC on a Raspberry Pi
167- CHANGED: The real satellite visibility is considered, if the expected observations are computed in RINEX QC
168
169
170## 2.12.2 (2016-05-18)
171- FIXED: Wrong RINEX v2 header line excluded
172- ADDED: Expected observations in RINEX QC
173- ADDED: Limits for spherical harmonics/degree order extended
174
175## 2.12.1 (2016-04-21)
176- FIXED: RINEX v2 file naming for observation files
177- CHANGED: Release number is now part of BNC version
178
179## 2.12.0 (2016-04-19)
180
Note: See TracBrowser for help on using the repository browser.