source: ntrip/branches/BNC_2.12/src/bncwindow.cpp@ 8101

Last change on this file since 8101 was 8101, checked in by stuerze, 8 years ago

some further updates regarding ITRF2014
File size: 150.2 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70# include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83 const static QPalette paletteWhite(QColor(255, 255, 255));
84 const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87 BNC_CORE->setConfFileName("");
88#endif
89
90 _caster = 0;
91 _casterEph = 0;
92
93 _bncFigure = new bncFigure(this);
94 _bncFigureLate = new bncFigureLate(this);
95 _bncFigurePPP = new bncFigurePPP(this);
96
97 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98 _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100 connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101 connect(BNC_CORE, SIGNAL(finishedRnxPPP()), this, SLOT(slotPostProcessingFinished()));
102
103 _runningRealTime = false;
104 _runningPPP = false;
105 _runningEdit = false;
106 _runningQC = false;
107 _runningSp3Comp = false;
108 _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110 _mapWin = 0;
111
112 int ww = QFontMetrics(this->font()).width('w');
113
114 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116 setMinimumSize(100*ww, 70*ww);
117
118 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121 this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123 // Create Actions
124 // --------------
125 _actHelp = new QAction(tr("&Help Contents"),this);
126 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128 _actAbout = new QAction(tr("&About BNC"),this);
129 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131 _actFlowchart = new QAction(tr("&Flow Chart"),this);
132 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134 _actFontSel = new QAction(tr("Select &Font"),this);
135 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137 _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140 _actQuit = new QAction(tr("&Quit"),this);
141 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148 _actDeleteMountPoints->setEnabled(false);
149
150 _actMapMountPoints = new QAction(tr("&Map"),this);
151 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153 _actStart = new QAction(tr("Sta&rt"),this);
154 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156 _actStop = new QAction(tr("Sto&p"),this);
157 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158
159 _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
160 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
161
162 CreateMenu();
163 AddToolbar();
164
165 bncSettings settings;
166
167 // Network Options
168 // ---------------
169 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
170 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
171
172 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
173 this, SLOT(slotBncTextChanged()));
174
175 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
176 _sslIgnoreErrorsCheckBox = new QCheckBox();
177 _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
178 settings.value("sslIgnoreErrors").toInt()));
179
180 // General Options
181 // ---------------
182 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
183 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
184 _rnxAppendCheckBox = new QCheckBox();
185 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
186 settings.value("rnxAppend").toInt()));
187 _onTheFlyComboBox = new QComboBox();
188 _onTheFlyComboBox->setEditable(false);
189 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
190 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
191 if (ii != -1) {
192 _onTheFlyComboBox->setCurrentIndex(ii);
193 }
194 _autoStartCheckBox = new QCheckBox();
195 _autoStartCheckBox->setCheckState(Qt::CheckState(
196 settings.value("autoStart").toInt()));
197
198 // RINEX Observations Options
199 // --------------------------
200 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
201 _rnxIntrComboBox = new QComboBox();
202 _rnxIntrComboBox->setEditable(false);
203 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
205 if (ii != -1) {
206 _rnxIntrComboBox->setCurrentIndex(ii);
207 }
208 _rnxSamplSpinBox = new QSpinBox();
209 _rnxSamplSpinBox->setMinimum(0);
210 _rnxSamplSpinBox->setMaximum(60);
211 _rnxSamplSpinBox->setSingleStep(5);
212 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
213 _rnxFileCheckBox = new QCheckBox();
214 _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
215 _rnxSamplSpinBox->setSuffix(" sec");
216 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
217 _rnxSkelLineEdit->setMaximumWidth(5*ww);
218 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
219 _rnxV3CheckBox = new QCheckBox();
220 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
221 _rnxV3filenameCheckBox = new QCheckBox();
222 _rnxV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3filenames").toInt()));
223 QString hlp = settings.value("rnxV2Priority").toString();
224 if (hlp.isEmpty()) {
225 hlp = "G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX E:16&BCX E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:IQX I:ABCX S:1&C S:5&IQX";
226 }
227 _rnxV2Priority = new QLineEdit(hlp);
228
229 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
230 this, SLOT(slotBncTextChanged()));
231 connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
232 this, SLOT(slotBncTextChanged()));
233
234 // RINEX Ephemeris Options
235 // -----------------------
236 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
237 _ephIntrComboBox = new QComboBox();
238 _ephIntrComboBox->setEditable(false);
239 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
240 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
241 if (jj != -1) {
242 _ephIntrComboBox->setCurrentIndex(jj);
243 }
244 _ephOutPortLineEdit = new QLineEdit(settings.value("ephOutPort").toString());
245 _ephV3CheckBox = new QCheckBox();
246 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
247
248 _ephV3filenameCheckBox = new QCheckBox();
249 _ephV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("ephV3filenames").toInt()));
250
251 connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
252 this, SLOT(slotBncTextChanged()));
253
254 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
255 this, SLOT(slotBncTextChanged()));
256
257 // Broadcast Corrections Options
258 // -----------------------------
259 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
260 _corrIntrComboBox = new QComboBox();
261 _corrIntrComboBox->setEditable(false);
262 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
263 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
264 if (mm != -1) {
265 _corrIntrComboBox->setCurrentIndex(mm);
266 }
267 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
268
269 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
270 this, SLOT(slotBncTextChanged()));
271
272 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
273 this, SLOT(slotBncTextChanged()));
274
275 // Feed Engine Options
276 // -------------------
277 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
278 _outWaitSpinBox = new QSpinBox();
279 _outWaitSpinBox->setMinimum(1);
280 _outWaitSpinBox->setMaximum(30);
281 _outWaitSpinBox->setSingleStep(1);
282 _outWaitSpinBox->setSuffix(" sec");
283 _outWaitSpinBox->setValue(settings.value("outWait").toInt());
284 _outSamplSpinBox = new QSpinBox();
285 _outSamplSpinBox->setMinimum(0);
286 _outSamplSpinBox->setMaximum(60);
287 _outSamplSpinBox->setSingleStep(5);
288 _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
289 _outSamplSpinBox->setSuffix(" sec");
290 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
291 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
292
293 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
294 this, SLOT(slotBncTextChanged()));
295
296 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
297 this, SLOT(slotBncTextChanged()));
298
299 // Serial Output Options
300 // ---------------------
301 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
302 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
303 _serialBaudRateComboBox = new QComboBox();
304 _serialBaudRateComboBox->addItems(QString("110,300,600,"
305 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
306 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
307 if (kk != -1) {
308 _serialBaudRateComboBox->setCurrentIndex(kk);
309 }
310 _serialFlowControlComboBox = new QComboBox();
311 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
312 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
313 if (kk != -1) {
314 _serialFlowControlComboBox->setCurrentIndex(kk);
315 }
316 _serialDataBitsComboBox = new QComboBox();
317 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
318 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
319 if (kk != -1) {
320 _serialDataBitsComboBox->setCurrentIndex(kk);
321 }
322 _serialParityComboBox = new QComboBox();
323 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
324 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
325 if (kk != -1) {
326 _serialParityComboBox->setCurrentIndex(kk);
327 }
328 _serialStopBitsComboBox = new QComboBox();
329 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
330 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
331 if (kk != -1) {
332 _serialStopBitsComboBox->setCurrentIndex(kk);
333 }
334 _serialAutoNMEAComboBox = new QComboBox();
335 _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
336 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
337 if (kk != -1) {
338 _serialAutoNMEAComboBox->setCurrentIndex(kk);
339 }
340 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
341 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
342
343 _serialManualNMEASamplingSpinBox = new QSpinBox();
344 _serialManualNMEASamplingSpinBox->setMinimum(0);
345 _serialManualNMEASamplingSpinBox->setMaximum(300);
346 _serialManualNMEASamplingSpinBox->setSingleStep(10);
347 _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
348 _serialManualNMEASamplingSpinBox->setSuffix(" sec");
349
350 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
351 this, SLOT(slotBncTextChanged()));
352
353 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
354 this, SLOT(slotBncTextChanged()));
355
356 // Outages Options
357 // ---------------
358 _adviseObsRateComboBox = new QComboBox();
359 _adviseObsRateComboBox->setEditable(false);
360 _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
361 kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
362 if (kk != -1) {
363 _adviseObsRateComboBox->setCurrentIndex(kk);
364 }
365 _adviseFailSpinBox = new QSpinBox();
366 _adviseFailSpinBox->setMinimum(0);
367 _adviseFailSpinBox->setMaximum(60);
368 _adviseFailSpinBox->setSingleStep(1);
369 _adviseFailSpinBox->setSuffix(" min");
370 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
371 _adviseRecoSpinBox = new QSpinBox();
372 _adviseRecoSpinBox->setMinimum(0);
373 _adviseRecoSpinBox->setMaximum(60);
374 _adviseRecoSpinBox->setSingleStep(1);
375 _adviseRecoSpinBox->setSuffix(" min");
376 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
377 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
378
379 connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
380 this, SLOT(slotBncTextChanged()));
381
382 // Miscellaneous Options
383 // ---------------------
384 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
385 _miscPortLineEdit = new QLineEdit(settings.value("miscPort").toString());
386 _miscIntrComboBox = new QComboBox();
387 _miscIntrComboBox->setEditable(false);
388 _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
389 int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
390 if (ll != -1) {
391 _miscIntrComboBox->setCurrentIndex(ll);
392 }
393 _miscScanRTCMCheckBox = new QCheckBox();
394 _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
395 settings.value("miscScanRTCM").toInt()));
396
397 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
398 this, SLOT(slotBncTextChanged()));
399
400 // Streams
401 // -------
402 _mountPointsTable = new QTableWidget(0,9);
403
404 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
405 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
406 _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
407 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
408 _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
409 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
410 _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
411 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
412 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
413 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
414 _mountPointsTable->setHorizontalHeaderLabels(labels);
415 _mountPointsTable->setGridStyle(Qt::NoPen);
416 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
417 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
418 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
419 _mountPointsTable->hideColumn(0);
420 _mountPointsTable->hideColumn(3);
421 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
422 SLOT(slotSelectionChanged()));
423 populateMountPointsTable();
424
425 _log = new QTextEdit();
426 _log->setReadOnly(true);
427 QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
428 _log->setFont(msFont);
429 _log->document()->setMaximumBlockCount(1000);
430
431 // Combine Corrections
432 // -------------------
433 _cmbTable = new QTableWidget(0,3);
434 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
435 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
436 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
437 _cmbTable->setMaximumWidth(30*ww);
438 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
439 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
440 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
441 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
442 _cmbTable->horizontalHeader()->setStretchLastSection(true);
443 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
444
445 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
446 _cmbUseGlonass = new QCheckBox();
447 _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
448
449 _cmbSamplSpinBox = new QSpinBox;
450 _cmbSamplSpinBox->setMinimum(10);
451 _cmbSamplSpinBox->setMaximum(60);
452 _cmbSamplSpinBox->setSingleStep(10);
453 _cmbSamplSpinBox->setMaximumWidth(9*ww);
454 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
455 _cmbSamplSpinBox->setSuffix(" sec");
456
457 QPushButton* addCmbRowButton = new QPushButton("Add Row");
458 QPushButton* delCmbRowButton = new QPushButton("Delete");
459
460 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
461 SLOT(slotBncTextChanged()));
462
463 _cmbMethodComboBox = new QComboBox();
464 _cmbMethodComboBox->setEditable(false);
465 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
466 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
467 if (im != -1) {
468 _cmbMethodComboBox->setCurrentIndex(im);
469 }
470
471 int iRow = _cmbTable->rowCount();
472 if (iRow > 0) {
473 enableWidget(true, _cmbMethodComboBox);
474 enableWidget(true, _cmbMaxresLineEdit);
475 enableWidget(true, _cmbSamplSpinBox);
476 enableWidget(true, _cmbUseGlonass);
477 }
478 else {
479 enableWidget(false, _cmbMethodComboBox);
480 enableWidget(false, _cmbMaxresLineEdit);
481 enableWidget(false, _cmbSamplSpinBox);
482 enableWidget(false, _cmbUseGlonass);
483 }
484
485 // Upload Results
486 // -------------
487 _uploadTable = new QTableWidget(0,12);
488 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
489 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
490 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
491 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
492 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
493 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
494 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
495 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
496 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
497 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
498 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
499 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
500 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
501 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
502 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
503 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
504 _uploadTable->horizontalHeader()->setStretchLastSection(true);
505 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
506
507 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
508 SLOT(slotBncTextChanged()));
509
510 QPushButton* addUploadRowButton = new QPushButton("Add Row");
511 QPushButton* delUploadRowButton = new QPushButton("Del Row");
512 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
513 _uploadIntrComboBox = new QComboBox;
514 _uploadIntrComboBox->setEditable(false);
515 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
516 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
517 if (ii != -1) {
518 _uploadIntrComboBox->setCurrentIndex(ii);
519 }
520
521 _uploadAntexFile = new qtFileChooser(0, qtFileChooser::File);
522 _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
523
524 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
525 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
526 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
527 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
528 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
529 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
530 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
531
532 _uploadSamplSp3SpinBox = new QSpinBox;
533 _uploadSamplSp3SpinBox->setMinimum(0);
534 _uploadSamplSp3SpinBox->setMaximum(15);
535 _uploadSamplSp3SpinBox->setSingleStep(1);
536 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
537 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
538 _uploadSamplSp3SpinBox->setSuffix(" min");
539
540 _uploadSamplClkRnxSpinBox = new QSpinBox;
541 _uploadSamplClkRnxSpinBox->setMinimum(0);
542 _uploadSamplClkRnxSpinBox->setMaximum(60);
543 _uploadSamplClkRnxSpinBox->setSingleStep(5);
544 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
545 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
546 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
547
548 int iRowT = _uploadTable->rowCount();
549 if (iRowT > 0) {
550 enableWidget(true, _uploadIntrComboBox);
551 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
552 enableWidget(true, _uploadSamplSp3SpinBox);
553 enableWidget(true, _uploadSamplClkRnxSpinBox);
554 enableWidget(true, _uploadAntexFile);
555 }
556 else {
557 enableWidget(false, _uploadIntrComboBox);
558 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
559 enableWidget(false, _uploadSamplSp3SpinBox);
560 enableWidget(false, _uploadSamplClkRnxSpinBox);
561 enableWidget(false, _uploadAntexFile);
562 }
563
564 // Upload RTCM3 Ephemeris
565 // ----------------------
566 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
567 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
568 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
569 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
570 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
571 _uploadEphSampleSpinBox = new QSpinBox;
572 _uploadEphSampleSpinBox->setMinimum(5);
573 _uploadEphSampleSpinBox->setMaximum(60);
574 _uploadEphSampleSpinBox->setSingleStep(5);
575 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
576 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
577 _uploadEphSampleSpinBox->setSuffix(" sec");
578 _uploadEphBytesCounter = new bncBytesCounter;
579
580 // Canvas with Editable Fields
581 // ---------------------------
582 _canvas = new QWidget;
583 setCentralWidget(_canvas);
584
585 _aogroup = new QTabWidget();
586 _aogroup->setElideMode(Qt::ElideNone);
587 _aogroup->setUsesScrollButtons(true);
588 QWidget* pgroup = new QWidget();
589 QWidget* ggroup = new QWidget();
590 QWidget* sgroup = new QWidget();
591 QWidget* egroup = new QWidget();
592 QWidget* agroup = new QWidget();
593 QWidget* cgroup = new QWidget();
594 QWidget* ogroup = new QWidget();
595 QWidget* rgroup = new QWidget();
596 QWidget* sergroup = new QWidget();
597 QWidget* pppGroup1 = new QWidget();
598 QWidget* pppGroup2 = new QWidget();
599 QWidget* pppGroup3 = new QWidget();
600 QWidget* pppGroup4 = new QWidget();
601 QWidget* reqcgroup = new QWidget();
602 QWidget* sp3CompGroup = new QWidget();
603 QWidget* cmbgroup = new QWidget();
604 QWidget* uploadgroup = new QWidget();
605 QWidget* uploadEphgroup = new QWidget();
606 _aogroup->addTab(pgroup,tr("Network"));
607 _aogroup->addTab(ggroup,tr("General"));
608 _aogroup->addTab(ogroup,tr("RINEX Observations"));
609 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
610 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
611 _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
612 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
613 _aogroup->addTab(sgroup,tr("Feed Engine"));
614 _aogroup->addTab(sergroup,tr("Serial Output"));
615 _aogroup->addTab(agroup,tr("Outages"));
616 _aogroup->addTab(rgroup,tr("Miscellaneous"));
617 _aogroup->addTab(pppGroup1,tr("PPP (1)"));
618 _aogroup->addTab(pppGroup2,tr("PPP (2)"));
619 _aogroup->addTab(pppGroup3,tr("PPP (3)"));
620 _aogroup->addTab(pppGroup4,tr("PPP (4)"));
621 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
622 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
623 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
624
625 // Log Tab
626 // -------
627 _loggroup = new QTabWidget();
628 _loggroup->addTab(_log,tr("Log"));
629 _loggroup->addTab(_bncFigure,tr("Throughput"));
630 _loggroup->addTab(_bncFigureLate,tr("Latency"));
631 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
632
633 // Netowork (Proxy and SSL) Tab
634 // ----------------------------
635 QGridLayout* pLayout = new QGridLayout;
636 pLayout->setColumnMinimumWidth(0,13*ww);
637 _proxyPortLineEdit->setMaximumWidth(9*ww);
638
639 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
640 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
641 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
642 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
643 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
644 pLayout->addWidget(new QLabel("Path to SSL certificates"), 3, 0);
645 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
646 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
647 pLayout->addWidget(new QLabel("Ignore SSL authorization errors"), 4, 0);
648 pLayout->addWidget(_sslIgnoreErrorsCheckBox, 4, 1, 1,10);
649 pLayout->addWidget(new QLabel(""), 5, 1);
650 pLayout->setRowStretch(6, 999);
651
652 pgroup->setLayout(pLayout);
653
654 // General Tab
655 // -----------
656 QGridLayout* gLayout = new QGridLayout;
657 gLayout->setColumnMinimumWidth(0,14*ww);
658 _onTheFlyComboBox->setMaximumWidth(9*ww);
659
660 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
661 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
662 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,20);
663 gLayout->addWidget(new QLabel("Append files"), 2, 0);
664 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
665 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
666 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
667 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
668 gLayout->addWidget(_autoStartCheckBox, 4, 1);
669 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
670 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,20);
671 gLayout->addWidget(new QLabel(""), 6, 1);
672 gLayout->setRowStretch(7, 999);
673
674 ggroup->setLayout(gLayout);
675
676 // RINEX Observations
677 // ------------------
678 QGridLayout* oLayout = new QGridLayout;
679 oLayout->setColumnMinimumWidth(0,14*ww);
680 _rnxIntrComboBox->setMaximumWidth(9*ww);
681 _rnxSamplSpinBox->setMaximumWidth(9*ww);
682
683 oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
684 oLayout->addWidget(new QLabel("Directory"), 1, 0);
685 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1, 15);
686 oLayout->addWidget(new QLabel("Interval"), 2, 0);
687 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
688 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
689 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
690 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
691 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, Qt::AlignLeft);
692 oLayout->addWidget(new QLabel("Skeleton mandatory"), 3, 2);
693 oLayout->addWidget(_rnxFileCheckBox, 3, 3);
694 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
695 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1, 15);
696 oLayout->addWidget(new QLabel("Version 2 signal priority"), 5, 0);
697 oLayout->addWidget(_rnxV2Priority, 5, 1, 1, 15);
698 oLayout->addWidget(new QLabel("Version 3"), 6, 0);
699 oLayout->addWidget(_rnxV3CheckBox, 6, 1);
700 oLayout->addWidget(new QLabel("Version 3 filenames"), 6, 2);
701 oLayout->addWidget(_rnxV3filenameCheckBox, 6, 3);
702 oLayout->addWidget(new QLabel(""), 7, 1);
703 oLayout->setRowStretch(8, 999);
704
705 ogroup->setLayout(oLayout);
706
707 // RINEX Ephemeris
708 // ---------------
709 QGridLayout* eLayout = new QGridLayout;
710 eLayout->setColumnMinimumWidth(0,14*ww);
711 _ephIntrComboBox->setMaximumWidth(9*ww);
712 _ephOutPortLineEdit->setMaximumWidth(9*ww);
713
714 eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
715 eLayout->addWidget(new QLabel("Directory"), 1, 0);
716 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
717 eLayout->addWidget(new QLabel("Interval"), 2, 0);
718 eLayout->addWidget(_ephIntrComboBox, 2, 1);
719 eLayout->addWidget(new QLabel("Port"), 3, 0);
720 eLayout->addWidget(_ephOutPortLineEdit, 3, 1);
721 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
722 eLayout->addWidget(_ephV3CheckBox, 4, 1);
723 eLayout->addWidget(new QLabel("Version 3 filenames"), 4, 2);
724 eLayout->addWidget(_ephV3filenameCheckBox, 4, 3);
725 eLayout->setRowStretch(5, 999);
726
727 egroup->setLayout(eLayout);
728
729
730 // Broadcast Corrections
731 // ---------------------
732 QGridLayout* cLayout = new QGridLayout;
733 cLayout->setColumnMinimumWidth(0,14*ww);
734 _corrIntrComboBox->setMaximumWidth(9*ww);
735 _corrPortLineEdit->setMaximumWidth(9*ww);
736
737 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
738 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
739 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,30);
740 cLayout->addWidget(new QLabel("Interval"), 2, 0);
741 cLayout->addWidget(_corrIntrComboBox, 2, 1);
742 cLayout->addWidget(new QLabel("Port"), 3, 0);
743 cLayout->addWidget(_corrPortLineEdit, 3, 1);
744 cLayout->addWidget(new QLabel(""), 4, 1);
745 cLayout->setRowStretch(7, 999);
746 cgroup->setLayout(cLayout);
747
748 // Feed Engine
749 // -----------
750 QGridLayout* sLayout = new QGridLayout;
751 sLayout->setColumnMinimumWidth(0,14*ww);
752 _outPortLineEdit->setMaximumWidth(9*ww);
753 _outWaitSpinBox->setMaximumWidth(9*ww);
754 _outSamplSpinBox->setMaximumWidth(9*ww);
755 _outUPortLineEdit->setMaximumWidth(9*ww);
756
757 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
758 sLayout->addWidget(new QLabel("Port"), 1, 0);
759 sLayout->addWidget(_outPortLineEdit, 1, 1);
760 sLayout->addWidget(new QLabel(" Wait for full obs epoch"), 1, 2, Qt::AlignRight);
761 sLayout->addWidget(_outWaitSpinBox, 1, 3, Qt::AlignLeft);
762 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
763 sLayout->addWidget(_outSamplSpinBox, 2, 1, Qt::AlignLeft);
764 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
765 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 10);
766 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
767 sLayout->addWidget(_outUPortLineEdit, 4, 1);
768 sLayout->addWidget(new QLabel(""), 5, 1);
769 sLayout->setRowStretch(6, 999);
770
771 sgroup->setLayout(sLayout);
772
773 // Serial Output
774 // -------------
775 QGridLayout* serLayout = new QGridLayout;
776 serLayout->setColumnMinimumWidth(0,12*ww);
777 _serialBaudRateComboBox->setMaximumWidth(9*ww);
778 _serialFlowControlComboBox->setMaximumWidth(11*ww);
779 _serialDataBitsComboBox->setMaximumWidth(5*ww);
780 _serialParityComboBox->setMaximumWidth(9*ww);
781 _serialStopBitsComboBox->setMaximumWidth(5*ww);
782 _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
783 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
784 _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
785
786 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
787 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
788 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
789 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
790 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
791 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
792 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
793 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
794 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
795 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
796 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
797 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
798 serLayout->addWidget(_serialParityComboBox, 4, 3);
799 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
800 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
801 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
802 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
803 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
804 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,10);
805 serLayout->addWidget(new QLabel("Height"), 5,14, Qt::AlignRight);
806 serLayout->addWidget(_serialHeightNMEALineEdit, 5,15, 1,11);
807 serLayout->addWidget(new QLabel("Sampling"), 5,25, Qt::AlignRight);
808 serLayout->addWidget(_serialManualNMEASamplingSpinBox, 5,26, 1,12);
809 serLayout->addWidget(new QLabel(""), 6, 1);
810 serLayout->setRowStretch(7, 999);
811
812 sergroup->setLayout(serLayout);
813
814 // Outages
815 // -------
816 QGridLayout* aLayout = new QGridLayout;
817 aLayout->setColumnMinimumWidth(0,14*ww);
818 _adviseObsRateComboBox->setMaximumWidth(9*ww);
819 _adviseFailSpinBox->setMaximumWidth(9*ww);
820 _adviseRecoSpinBox->setMaximumWidth(9*ww);
821
822 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
823 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
824 aLayout->addWidget(_adviseObsRateComboBox, 1, 1);
825 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
826 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
827 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
828 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
829 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
830 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,20);
831 aLayout->addWidget(new QLabel(""), 5, 1);
832 aLayout->setRowStretch(6, 999);
833
834 agroup->setLayout(aLayout);
835
836 // Miscellaneous
837 // -------------
838 QGridLayout* rLayout = new QGridLayout;
839 rLayout->setColumnMinimumWidth(0,14*ww);
840 _miscIntrComboBox->setMaximumWidth(9*ww);
841 _miscPortLineEdit->setMaximumWidth(9*ww);
842
843 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
844 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
845 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1, 7);
846 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
847 rLayout->addWidget(_miscIntrComboBox, 2, 1);
848 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
849 rLayout->addWidget(_miscScanRTCMCheckBox, 3, 1);
850 rLayout->addWidget(new QLabel("Port"), 4, 0);
851 rLayout->addWidget(_miscPortLineEdit, 4, 1);
852 rLayout->addWidget(new QLabel(""), 5, 1);
853 rLayout->setRowStretch(6, 999);
854
855 rgroup->setLayout(rLayout);
856
857 // PPP
858 // ---
859 _pppWidgets._dataSource->setMaximumWidth(20*ww);
860 _pppWidgets._corrMount->setMaximumWidth(20*ww);
861
862 _pppWidgets._corrFile->setMaximumWidth(35*ww);
863 _pppWidgets._crdFile->setMaximumWidth(35*ww);
864 _pppWidgets._logPath->setMaximumWidth(35*ww);
865 _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
866 _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
867 _pppWidgets._snxtroAc ->setMaximumWidth(10*ww);
868 _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
869
870 QGridLayout* pppLayout1 = new QGridLayout();
871 int ir = 0;
872 pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
873 ++ir;
874 pppLayout1->addWidget(new QLabel("Data source"), ir, 0);
875 pppLayout1->addWidget(_pppWidgets._dataSource, ir, 1);
876 pppLayout1->addWidget(new QLabel(" RINEX Obs file"), ir, 3);
877 pppLayout1->addWidget(_pppWidgets._rinexObs, ir, 4, 1, 3);
878 ++ir;
879 pppLayout1->addWidget(new QLabel("Corrections stream"), ir, 0);
880 pppLayout1->addWidget(_pppWidgets._corrMount, ir, 1);
881 pppLayout1->addWidget(new QLabel(" RINEX Nav file"), ir, 3);
882 pppLayout1->addWidget(_pppWidgets._rinexNav, ir, 4, 1, 3);
883 ++ir;
884 pppLayout1->addWidget(new QLabel("Corrections file"), ir, 0);
885 pppLayout1->addWidget(_pppWidgets._corrFile, ir, 1);
886 pppLayout1->addWidget(new QLabel(" ANTEX file"), ir, 3);
887 pppLayout1->addWidget(_pppWidgets._antexFile, ir, 4, 1, 3);
888 ++ir;
889 pppLayout1->addWidget(new QLabel("Coordinates file"), ir, 0);
890 pppLayout1->addWidget(_pppWidgets._crdFile, ir, 1);
891 pppLayout1->addWidget(new QLabel(" Version 3 filenames"),ir, 3);
892 pppLayout1->addWidget(_pppWidgets._v3filenames, ir, 4, 1, 3);
893 ++ir;
894 pppLayout1->addWidget(new QLabel("Logfile directory"), ir, 0);
895 pppLayout1->addWidget(_pppWidgets._logPath, ir, 1);
896 pppLayout1->addWidget(new QLabel(" NMEA directory"), ir, 3);
897 pppLayout1->addWidget(_pppWidgets._nmeaPath, ir, 4, 1, 3);
898 ++ir;
899 pppLayout1->addWidget(new QLabel("SNX TRO directory"), ir, 0);
900 pppLayout1->addWidget(_pppWidgets._snxtroPath, ir, 1);
901 pppLayout1->addWidget(new QLabel(" SNX TRO interval"), ir, 3);
902 pppLayout1->addWidget(_pppWidgets._snxtroIntr, ir, 4);
903 pppLayout1->addWidget(new QLabel(" SNX TRO sampling"), ir, 5);
904 pppLayout1->addWidget(_pppWidgets._snxtroSampl, ir, 6, Qt::AlignRight);
905 ++ir;
906 pppLayout1->addWidget(new QLabel(" SNX TRO AC"), ir, 3);
907 pppLayout1->addWidget(_pppWidgets._snxtroAc, ir, 4);
908 pppLayout1->addWidget(new QLabel(" SNX TRO solution") ,ir, 5);
909 pppLayout1->addWidget(_pppWidgets._snxtroSol, ir, 6, Qt::AlignRight);
910 pppLayout1->setRowStretch(ir, 999);
911
912 pppGroup1->setLayout(pppLayout1);
913
914 QVBoxLayout* pppLayout2 = new QVBoxLayout();
915 pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
916 pppLayout2->addWidget(_pppWidgets._staTable, 99);
917 QHBoxLayout* pppLayout2sub = new QHBoxLayout();
918 pppLayout2sub->addWidget(_pppWidgets._addStaButton);
919 pppLayout2sub->addWidget(_pppWidgets._delStaButton);
920 pppLayout2sub->addStretch(99);
921
922 pppLayout2->addLayout(pppLayout2sub);
923
924 pppGroup2->setLayout(pppLayout2);
925
926 QGridLayout* pppLayout3 = new QGridLayout();
927 ir = 0;
928 pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
929 ++ir;
930 pppLayout3->addWidget(new QLabel("GPS LCs"), ir, 0, Qt::AlignLeft);
931 pppLayout3->addWidget(_pppWidgets._lcGPS, ir, 1);
932 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 2);
933 pppLayout3->addWidget(new QLabel("Sigma C1"), ir, 3, Qt::AlignLeft);
934 pppLayout3->addWidget(_pppWidgets._sigmaC1, ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
935 pppLayout3->addItem(new QSpacerItem(8*ww, 0), ir, 5);
936 pppLayout3->addWidget(new QLabel("Sigma L1"), ir, 6, Qt::AlignLeft);
937 pppLayout3->addWidget(_pppWidgets._sigmaL1, ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
938 ++ir;
939 pppLayout3->addWidget(new QLabel("GLONASS LCs"), ir, 0, Qt::AlignLeft);
940 pppLayout3->addWidget(_pppWidgets._lcGLONASS, ir, 1);
941 pppLayout3->addWidget(new QLabel("Max Res C1"), ir, 3, Qt::AlignLeft);
942 pppLayout3->addWidget(_pppWidgets._maxResC1, ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
943 pppLayout3->addWidget(new QLabel("Max Res L1"), ir, 6, Qt::AlignLeft);
944 pppLayout3->addWidget(_pppWidgets._maxResL1, ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
945 ++ir;
946 pppLayout3->addWidget(new QLabel("Galileo LCs"), ir, 0, Qt::AlignLeft);
947 pppLayout3->addWidget(_pppWidgets._lcGalileo, ir, 1);
948 pppLayout3->addWidget(new QLabel("Ele Wgt Code"), ir, 3, Qt::AlignLeft);
949 pppLayout3->addWidget(_pppWidgets._eleWgtCode, ir, 4);
950 pppLayout3->addWidget(new QLabel("Ele Wgt Phase"), ir, 6, Qt::AlignLeft);
951 pppLayout3->addWidget(_pppWidgets._eleWgtPhase, ir, 7);
952 ++ir;
953 pppLayout3->addWidget(new QLabel("BDS LCs"), ir, 0, Qt::AlignLeft);
954 pppLayout3->addWidget(_pppWidgets._lcBDS, ir, 1);
955 pppLayout3->addWidget(new QLabel("Min # of Obs"), ir, 3, Qt::AlignLeft);
956 pppLayout3->addWidget(_pppWidgets._minObs, ir, 4);
957 pppLayout3->addWidget(new QLabel("Min Elevation"), ir, 6, Qt::AlignLeft);
958 pppLayout3->addWidget(_pppWidgets._minEle, ir, 7);
959 ++ir;
960 pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
961 pppLayout3->addWidget(_pppWidgets._corrWaitTime, ir, 1);
962 pppLayout3->addWidget(new QLabel("Seeding (sec)"), ir, 3, Qt::AlignLeft);
963 pppLayout3->addWidget(_pppWidgets._seedingTime, ir, 4);
964 ++ir;
965 pppLayout3->addWidget(new QLabel(""), ir, 8);
966 pppLayout3->setColumnStretch(8, 999);
967 ++ir;
968 pppLayout3->addWidget(new QLabel(""), ir, 1);
969 pppLayout3->setRowStretch(ir, 999);
970
971 pppGroup3->setLayout(pppLayout3);
972
973 // ------------------------
974 connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
975 _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
976 _pppWidgets._audioResponse->setMaximumWidth(8*ww);
977
978 QGridLayout* pppLayout4 = new QGridLayout();
979 ir = 0;
980 pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
981 ++ir;
982 pppLayout4->addWidget(new QLabel("PPP Plot"), ir, 0, Qt::AlignLeft);
983 pppLayout4->addWidget(_pppWidgets._plotCoordinates, ir, 1, Qt::AlignLeft);
984 pppLayout4->addWidget(new QLabel("Mountpoint"), ir, 2, 1, 10, Qt::AlignLeft);
985 pppLayout4->addWidget(_pppWidgets._audioResponse, ir, 4, Qt::AlignLeft);
986 pppLayout4->addWidget(new QLabel("Audio response"), ir, 5, Qt::AlignRight);
987
988 ++ir;
989 pppLayout4->addWidget(new QLabel("Track map"), ir, 0, Qt::AlignLeft);
990 pppLayout4->addWidget(_pppWidgets._mapWinButton, ir, 1, Qt::AlignLeft);
991 pppLayout4->addWidget(new QLabel("OSM"), ir, 2, Qt::AlignLeft);
992 pppLayout4->addWidget(_pppWidgets._useOpenStreetMap, ir, 3, Qt::AlignLeft);
993 pppLayout4->addWidget(new QLabel("Google"), ir, 3, Qt::AlignRight);
994 pppLayout4->addWidget(_pppWidgets._useGoogleMap, ir, 4, Qt::AlignLeft);
995 ++ir;
996 pppLayout4->addWidget(new QLabel("Dot-properties"), ir, 0, Qt::AlignLeft);
997 pppLayout4->addWidget(_pppWidgets._mapWinDotSize, ir, 1, Qt::AlignLeft);
998 pppLayout4->addWidget(new QLabel("Size "), ir, 2, Qt::AlignLeft);
999 pppLayout4->addWidget(_pppWidgets._mapWinDotColor, ir, 3, Qt::AlignLeft);
1000 pppLayout4->addWidget(new QLabel("Color"), ir, 4, Qt::AlignLeft);
1001 ++ir;
1002 pppLayout4->addWidget(new QLabel("Post-processing speed"), ir, 0, Qt::AlignLeft);
1003 pppLayout4->addWidget(_pppWidgets._mapSpeedSlider, ir, 1, 1, 20, Qt::AlignLeft);
1004 ++ir;
1005 pppLayout4->addWidget(new QLabel(""), ir, 1);
1006 pppLayout4->setRowStretch(ir, 999);
1007
1008 pppGroup4->setLayout(pppLayout4);
1009
1010 // Reqc Processing
1011 // ---------------
1012 _reqcActionComboBox = new QComboBox();
1013 _reqcActionComboBox->setEditable(false);
1014 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1015 int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1016 if (ik != -1) {
1017 _reqcActionComboBox->setCurrentIndex(ik);
1018 }
1019 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1020 this, SLOT(slotBncTextChanged()));
1021
1022 QGridLayout* reqcLayout = new QGridLayout;
1023 _reqcActionComboBox->setMinimumWidth(15*ww);
1024 _reqcActionComboBox->setMaximumWidth(20*ww);
1025
1026 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1027 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1028
1029 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1030 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1031 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1032 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1033 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1034 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1035 _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1036
1037 connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1038 this, SLOT(slotBncTextChanged()));
1039
1040 _reqcLogSummaryOnly = new QCheckBox();
1041 _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1042
1043 ir = 0;
1044 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1045 ++ir;
1046 reqcLayout->addWidget(new QLabel("Action"), ir, 0);
1047 reqcLayout->addWidget(_reqcActionComboBox, ir, 1);
1048 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1049 _reqcEditOptionButton->setMinimumWidth(15*ww);
1050 _reqcEditOptionButton->setMaximumWidth(20*ww);
1051
1052 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3);
1053 ++ir;
1054 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0);
1055 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1);
1056 _reqcObsFileChooser->setMaximumWidth(40*ww);
1057 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1058 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3);
1059 _reqcNavFileChooser->setMaximumWidth(40*ww);
1060 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1061 ++ir;
1062 reqcLayout->addWidget(new QLabel("Output file (full path)"), ir, 0);
1063 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1);
1064 _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1065 reqcLayout->addWidget(new QLabel(" Obs"), ir, 2);
1066 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3);
1067 _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1068 reqcLayout->addWidget(new QLabel(" Nav"), ir, 4);
1069 ++ir;
1070 reqcLayout->addWidget(new QLabel("Logfile"), ir, 0);
1071 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1);
1072 _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1073 reqcLayout->addWidget(new QLabel(" Summary only"), ir, 2);
1074 reqcLayout->addWidget(_reqcLogSummaryOnly, ir, 3);
1075 ++ir;
1076 reqcLayout->addWidget(new QLabel("Plots for signals"), ir, 0);
1077 reqcLayout->addWidget(_reqcSkyPlotSignals, ir, 1);
1078 _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1079 ++ir;
1080 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0);
1081 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1);
1082 _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1083 ++ir;
1084 reqcLayout->setRowStretch(ir, 999);
1085
1086 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1087 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1088
1089 reqcgroup->setLayout(reqcLayout);
1090
1091 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1092 this, SLOT(slotReqcEditOption()));
1093
1094 QGridLayout* sp3CompLayout = new QGridLayout;
1095
1096 _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1097 _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1098 _sp3CompFileChooser->setMinimumWidth(15*ww);
1099 _sp3CompFileChooser->setMaximumWidth(40*ww);
1100
1101 _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1102 _sp3CompExclude->setMinimumWidth(18*ww);
1103 _sp3CompExclude->setMaximumWidth(18*ww);
1104
1105 _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1106 _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1107 _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1108
1109 ir = 0;
1110 sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"), ir, 0, 1, 40);
1111 ++ir;
1112 sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"), ir, 0, Qt::AlignLeft);
1113 sp3CompLayout->addWidget(_sp3CompFileChooser, ir, 1, 1, 20);
1114 ++ir;
1115 sp3CompLayout->addWidget(new QLabel("Exclude satellites"), ir, 0, Qt::AlignLeft);
1116 sp3CompLayout->addWidget(_sp3CompExclude, ir, 1, Qt::AlignRight);
1117 ++ir;
1118 sp3CompLayout->addWidget(new QLabel("Logfile"), ir, 0, Qt::AlignLeft);
1119 sp3CompLayout->addWidget(_sp3CompLogLineEdit, ir, 1, Qt::AlignRight);
1120 ++ir;
1121 sp3CompLayout->addWidget(new QLabel(""), ir, 1);
1122 ++ir;
1123 sp3CompLayout->setRowStretch(ir, 999);
1124
1125 sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1126 sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1127
1128 sp3CompGroup->setLayout(sp3CompLayout);
1129
1130 connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1131 this, SLOT(slotBncTextChanged()));
1132
1133 // Combine Corrections
1134 // -------------------
1135 QGridLayout* cmbLayout = new QGridLayout;
1136
1137 populateCmbTable();
1138 cmbLayout->addWidget(_cmbTable, 0, 0, 8, 3);
1139 cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1140 cmbLayout->addWidget(addCmbRowButton, 2, 6);
1141 cmbLayout->addWidget(delCmbRowButton, 2, 7);
1142 cmbLayout->addWidget(new QLabel("Method"), 3, 6, Qt::AlignRight);
1143 cmbLayout->addWidget(_cmbMethodComboBox, 3, 7);
1144 cmbLayout->addWidget(new QLabel(" Maximal residuum"), 4, 6, Qt::AlignRight);
1145 cmbLayout->addWidget(_cmbMaxresLineEdit, 4, 7, Qt::AlignRight);
1146 cmbLayout->addWidget(new QLabel("Sampling"), 5, 6, Qt::AlignRight);
1147 cmbLayout->addWidget(_cmbSamplSpinBox, 5, 7);
1148 cmbLayout->addWidget(new QLabel(" Use GLONASS"), 6, 6, Qt::AlignRight);
1149 cmbLayout->addWidget(_cmbUseGlonass, 6, 7);
1150 cmbLayout->setRowStretch(7, 999);
1151
1152 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1153 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1154
1155 cmbgroup->setLayout(cmbLayout);
1156
1157 // Upload Layout (Clocks)
1158 // ----------------------
1159 QGridLayout* uploadHlpLayout = new QGridLayout();
1160
1161 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1162 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1163 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1164
1165 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1166 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1167 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1168 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1169 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1170 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1171 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1172 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1173 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1174 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1175 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1176 uploadHlpLayout->addWidget(new QLabel("ANTEX file"), 1, 0, Qt::AlignLeft);
1177 uploadHlpLayout->addWidget(_uploadAntexFile, 1, 1, 1, 4);
1178
1179 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1180 populateUploadTable();
1181
1182 uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1183 uploadLayout->addWidget(_uploadTable);
1184 uploadLayout->addLayout(uploadHlpLayout);
1185
1186 uploadgroup->setLayout(uploadLayout);
1187
1188 // Upload Layout (Ephemeris)
1189 // -------------------------
1190 QGridLayout* uploadLayoutEph = new QGridLayout;
1191
1192 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1193 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1194 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1195 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1196
1197 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1198 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1199 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1200 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1201 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1202 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1203 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1204 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1205 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1206 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1207 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1208 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1209 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1210 uploadLayoutEph->setRowStretch(5, 999);
1211
1212 uploadEphgroup->setLayout(uploadLayoutEph);
1213
1214 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1215 this, SLOT(slotBncTextChanged()));
1216
1217 // Main Layout
1218 // -----------
1219 QGridLayout* mLayout = new QGridLayout;
1220 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1221 mLayout->addWidget(_aogroup, 0,0);
1222 mLayout->addWidget(_mountPointsTable, 1,0);
1223 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1224 mLayout->addWidget(_loggroup, 2,0);
1225
1226 _canvas->setLayout(mLayout);
1227
1228 // WhatsThis, Network
1229 // ------------------
1230 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1231 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1232 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1233 _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.</p>"));
1234
1235 // WhatsThis, General
1236 // ------------------
1237 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1238 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1239 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1240 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1241 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1242
1243 // WhatsThis, RINEX Observations
1244 // -----------------------------
1245 _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1246 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1247 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files.</p>"));
1248 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. </p>"));
1249 _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1250 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1251 _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'C:IQX I:ABCX' (System specific signal priorities for BDS and IRNSS) </li><li>'G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX E:16&BCX E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:IQX I:ABCX S:1&C S:5&IQX'.</p>"));
1252 _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1253 _rnxV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1254
1255 // WhatsThis, RINEX Ephemeris
1256 // --------------------------
1257 _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1258 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1259 _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1260 _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1261 _ephV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1262
1263 // WhatsThis, RINEX Editing & QC
1264 // -----------------------------
1265 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1266 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1267 _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1268 _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1269 _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1270 _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1271 _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1272 _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1273 _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1274 _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5'. Specifying an empty option string would be overruled by this default.</p>"));
1275
1276 // WhatsThis, SP3 Comparison
1277 // -------------------------
1278 _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1279 _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1280 _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1281
1282 // WhatsThis, Broadcast Corrections
1283 // --------------------------------
1284 _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1285 _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1286 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1287
1288 // WhatsThis, Feed Engine
1289 // ----------------------
1290 _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1291 _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1292 _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1293 _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1294 _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1295
1296 // WhatsThis, Serial Output
1297 // ------------------------
1298 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1299 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1300 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1301 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1302 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1303 _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1304 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1305 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1306 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1307 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1308 _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1309
1310 // WhatsThis, Outages
1311 // ------------------
1312 _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1313 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1314 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1315 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1316
1317 // WhatsThis, Miscellaneous
1318 // ------------------------
1319 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1320 _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1321 _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1322 _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1323
1324 // WhatsThis, PPP (1)
1325 // ------------------
1326 _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1327 _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1328 _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1329 _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1330 _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1331 _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1332 _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1333 _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1334 _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1335 _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1336 _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1337 _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1338 _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk.</p>"));
1339 _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files.</p>"));
1340 _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC.</p>"));
1341
1342 // WhatsThis, PPP (3)
1343 // ------------------
1344 _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1345 _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1346 _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1347 _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1348 _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1349 _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1350 _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1351 _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1352 _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1353 _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1354 _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1355 _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.</p>"));
1356
1357 // WhatsThis, Combine Corrections
1358 // ------------------------------
1359 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1360 addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1361 delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1362 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1363 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1364 _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1365 _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1366
1367 // WhatsThis, Upload Corrections
1368 // -----------------------------
1369 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1370 addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1371 delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the Upload Corrections' table.</p>"));
1372 _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1373 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1374 _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1375 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1376 setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1377 _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1378
1379 // WhatsThis, Upload Ephemeris
1380 // ---------------------------
1381 _uploadEphHostLineEdit->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the stream.</p><p>An empty option field means that you don't want to upload Broadcast Ephemeris.</p>"));
1382 _uploadEphPortLineEdit->setWhatsThis(tr("<p>Specify the IP port of the Ntrip Broadcaster to upload the Broadcast Ephemeris stream. Default is port 80.</p>"));
1383 _uploadEphMountpointLineEdit->setWhatsThis(tr("<p>Specify a mountpoint for uploading the Broadcast Ephemeris stream.</p>"));
1384 _uploadEphPasswordLineEdit->setWhatsThis(tr("<p>Specify the stream upload password protecting the mounpoint on the Ntrip Broadcaster.</p>"));
1385 _uploadEphSampleSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1386 _uploadEphBytesCounter->setWhatsThis(tr("<p>BNC shows the amount of data uploaded via this stream.</p>"));
1387// weber
1388
1389 // WhatsThis, Streams Canvas
1390 // -------------------------
1391 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1392 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1393 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1394 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1395 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1396 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1397
1398 // WhatsThis, Log Canvas
1399 // ---------------------
1400 _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1401 _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1402 _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1403 _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1404
1405
1406 // Enable/Disable all Widgets
1407 // --------------------------
1408 slotBncTextChanged();
1409 enableStartStop();
1410
1411 // Auto start
1412 // ----------
1413 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1414 slotStart();
1415 }
1416}
1417
1418// Destructor
1419////////////////////////////////////////////////////////////////////////////
1420bncWindow::~bncWindow() {
1421 if (_caster) {
1422 delete _caster; BNC_CORE->setCaster(0);
1423 }
1424 if (_casterEph) {
1425 delete _casterEph;
1426 }
1427 delete _bncFigureLate;
1428 delete _bncFigurePPP;
1429 delete _actHelp;
1430 delete _actAbout;
1431 delete _actFlowchart;
1432 delete _actFontSel;
1433 delete _actSaveOpt;
1434 delete _actQuit;
1435 delete _actAddMountPoints;
1436 delete _actDeleteMountPoints;
1437 delete _actMapMountPoints;
1438 delete _actStart;
1439 delete _actStop;
1440 delete _actwhatsthis;
1441 delete _proxyHostLineEdit;
1442 delete _proxyPortLineEdit;
1443 delete _sslCaCertPathLineEdit;
1444 delete _sslIgnoreErrorsCheckBox;
1445 delete _logFileLineEdit;
1446 delete _rawOutFileLineEdit;
1447 delete _rnxAppendCheckBox;
1448 delete _onTheFlyComboBox;
1449 delete _autoStartCheckBox;
1450 delete _rnxPathLineEdit;
1451 delete _rnxIntrComboBox;
1452 delete _rnxSamplSpinBox;
1453 delete _rnxFileCheckBox;
1454 delete _rnxSkelLineEdit;
1455 delete _rnxScrpLineEdit;
1456 delete _rnxV3CheckBox;
1457 delete _rnxV3filenameCheckBox;
1458 delete _rnxV2Priority;
1459 delete _ephPathLineEdit;
1460 delete _ephIntrComboBox;
1461 delete _ephOutPortLineEdit;
1462 delete _ephV3CheckBox;
1463 delete _ephV3filenameCheckBox;
1464 delete _corrPathLineEdit;
1465 delete _corrIntrComboBox;
1466 delete _corrPortLineEdit;
1467 delete _outPortLineEdit;
1468 delete _outWaitSpinBox;
1469 delete _outSamplSpinBox;
1470 delete _outFileLineEdit;
1471 delete _outUPortLineEdit;
1472 delete _serialMountPointLineEdit;
1473 delete _serialPortNameLineEdit;
1474 delete _serialBaudRateComboBox;
1475 delete _serialFlowControlComboBox;
1476 delete _serialDataBitsComboBox;
1477 delete _serialParityComboBox;
1478 delete _serialStopBitsComboBox;
1479 delete _serialAutoNMEAComboBox;
1480 delete _serialFileNMEALineEdit;
1481 delete _serialHeightNMEALineEdit;
1482 delete _serialManualNMEASamplingSpinBox;
1483 delete _adviseObsRateComboBox;
1484 delete _adviseFailSpinBox;
1485 delete _adviseRecoSpinBox;
1486 delete _adviseScriptLineEdit;
1487 delete _miscMountLineEdit;
1488 delete _miscPortLineEdit;
1489 delete _miscIntrComboBox;
1490 delete _miscScanRTCMCheckBox;
1491 _mountPointsTable->deleteLater();
1492 delete _log;
1493 _cmbTable->deleteLater();
1494 delete _cmbMaxresLineEdit;
1495 delete _cmbUseGlonass;
1496 delete _cmbSamplSpinBox;
1497 delete _cmbMethodComboBox;
1498 _uploadTable->deleteLater();
1499 delete _uploadIntrComboBox;
1500 delete _uploadAntexFile;
1501 delete _uploadSamplRtcmEphCorrSpinBox;
1502 delete _uploadSamplSp3SpinBox;
1503 delete _uploadSamplClkRnxSpinBox;
1504 delete _uploadEphHostLineEdit;
1505 delete _uploadEphPortLineEdit;
1506 delete _uploadEphPasswordLineEdit;
1507 delete _uploadEphMountpointLineEdit;
1508 delete _uploadEphSampleSpinBox;
1509 delete _uploadEphBytesCounter;
1510 delete _loggroup;
1511 delete _reqcActionComboBox;
1512 delete _reqcObsFileChooser;
1513 delete _reqcNavFileChooser;
1514 delete _reqcOutObsLineEdit;
1515 delete _reqcOutNavLineEdit;
1516 delete _reqcOutLogLineEdit;
1517 delete _reqcPlotDirLineEdit;
1518 delete _reqcSkyPlotSignals;
1519 delete _reqcLogSummaryOnly;
1520 delete _reqcEditOptionButton;
1521 delete _sp3CompFileChooser;
1522 delete _sp3CompExclude;
1523 delete _sp3CompLogLineEdit;
1524 //delete _canvas;
1525}
1526
1527//
1528////////////////////////////////////////////////////////////////////////////
1529void bncWindow::populateMountPointsTable() {
1530
1531 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1532 _mountPointsTable->removeRow(iRow);
1533 }
1534
1535 bncSettings settings;
1536
1537 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1538 int iRow = 0;
1539 while (it.hasNext()) {
1540 QStringList hlp = it.next().split(" ");
1541 if (hlp.size() < 7) continue;
1542 _mountPointsTable->insertRow(iRow);
1543
1544 QUrl url(hlp[0]);
1545
1546 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1547 QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1548 QString nmea(hlp[5]);
1549 if (hlp[6] == "S") {
1550 fullPath = hlp[0].replace(0,2,"");
1551 }
1552 QString ntripVersion = "2";
1553 if (hlp.size() >= 7) {
1554 ntripVersion = (hlp[6]);
1555 }
1556
1557 QTableWidgetItem* it;
1558 it = new QTableWidgetItem(url.userInfo());
1559 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1560 _mountPointsTable->setItem(iRow, 0, it);
1561
1562 it = new QTableWidgetItem(fullPath);
1563 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1564 _mountPointsTable->setItem(iRow, 1, it);
1565
1566 it = new QTableWidgetItem(format);
1567 _mountPointsTable->setItem(iRow, 2, it);
1568
1569 it = new QTableWidgetItem(country);
1570 _mountPointsTable->setItem(iRow, 3, it);
1571
1572 if (nmea == "yes") {
1573 it = new QTableWidgetItem(latitude);
1574 _mountPointsTable->setItem(iRow, 4, it);
1575 it = new QTableWidgetItem(longitude);
1576 _mountPointsTable->setItem(iRow, 5, it);
1577 } else {
1578 it = new QTableWidgetItem(latitude);
1579 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1580 _mountPointsTable->setItem(iRow, 4, it);
1581
1582 it = new QTableWidgetItem(longitude);
1583 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1584 _mountPointsTable->setItem(iRow, 5, it);
1585 }
1586
1587 it = new QTableWidgetItem(nmea);
1588 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1589 _mountPointsTable->setItem(iRow, 6, it);
1590
1591 it = new QTableWidgetItem(ntripVersion);
1592 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1593 _mountPointsTable->setItem(iRow, 7, it);
1594
1595 bncTableItem* bncIt = new bncTableItem();
1596 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1597 _mountPointsTable->setItem(iRow, 8, bncIt);
1598
1599 iRow++;
1600 }
1601
1602 _mountPointsTable->sortItems(1);
1603
1604 enableStartStop();
1605}
1606
1607// Retrieve Table
1608////////////////////////////////////////////////////////////////////////////
1609void bncWindow::slotAddMountPoints() {
1610
1611 bncSettings settings;
1612 QString proxyHost = settings.value("proxyHost").toString();
1613 int proxyPort = settings.value("proxyPort").toInt();
1614 if (proxyHost != _proxyHostLineEdit->text() ||
1615 proxyPort != _proxyPortLineEdit->text().toInt()) {
1616 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1617 "changed. Use the new ones?",
1618 QMessageBox::Yes, QMessageBox::No,
1619 QMessageBox::NoButton);
1620 if (iRet == QMessageBox::Yes) {
1621 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1622 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1623 }
1624 }
1625
1626 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1627 settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1628
1629 QMessageBox msgBox;
1630 msgBox.setIcon(QMessageBox::Question);
1631 msgBox.setWindowTitle("Add Stream");
1632 msgBox.setText("Add stream(s) coming from:");
1633
1634 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1635 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1636 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1637 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1638 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1639
1640 msgBox.exec();
1641
1642 if (msgBox.clickedButton() == buttonNtrip) {
1643 bncTableDlg* dlg = new bncTableDlg(this);
1644 dlg->move(this->pos().x()+50, this->pos().y()+50);
1645 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1646 this, SLOT(slotNewMountPoints(QStringList*)));
1647 dlg->exec();
1648 delete dlg;
1649 } else if (msgBox.clickedButton() == buttonIP) {
1650 bncIpPort* ipp = new bncIpPort(this);
1651 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1652 this, SLOT(slotNewMountPoints(QStringList*)));
1653 ipp->exec();
1654 delete ipp;
1655 } else if (msgBox.clickedButton() == buttonUDP) {
1656 bncUdpPort* udp = new bncUdpPort(this);
1657 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1658 this, SLOT(slotNewMountPoints(QStringList*)));
1659 udp->exec();
1660 delete udp;
1661 } else if (msgBox.clickedButton() == buttonSerial) {
1662 bncSerialPort* sep = new bncSerialPort(this);
1663 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1664 this, SLOT(slotNewMountPoints(QStringList*)));
1665 sep->exec();
1666 delete sep;
1667 } else if (msgBox.clickedButton() == buttonCancel) {
1668 // Cancel
1669 }
1670
1671 enableStartStop();
1672}
1673
1674// Delete Selected Mount Points
1675////////////////////////////////////////////////////////////////////////////
1676void bncWindow::slotDeleteMountPoints() {
1677
1678 int nRows = _mountPointsTable->rowCount();
1679 bool flg[nRows];
1680 for (int iRow = 0; iRow < nRows; iRow++) {
1681 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1682 flg[iRow] = true;
1683 }
1684 else {
1685 flg[iRow] = false;
1686 }
1687 }
1688 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1689 if (flg[iRow]) {
1690 _mountPointsTable->removeRow(iRow);
1691 }
1692 }
1693 _actDeleteMountPoints->setEnabled(false);
1694
1695 enableStartStop();
1696}
1697
1698// New Mount Points Selected
1699////////////////////////////////////////////////////////////////////////////
1700void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1701 int iRow = 0;
1702 QListIterator<QString> it(*mountPoints);
1703 while (it.hasNext()) {
1704 QStringList hlp = it.next().split(" ");
1705 QUrl url(hlp[0]);
1706 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1707 QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1708 QString nmea(hlp[5]);
1709 if (hlp[6] == "S") {
1710 fullPath = hlp[0].replace(0,2,"");
1711 }
1712 QString ntripVersion = "2";
1713 if (hlp.size() >= 7) {
1714 ntripVersion = (hlp[6]);
1715 }
1716
1717 _mountPointsTable->insertRow(iRow);
1718
1719 QTableWidgetItem* it;
1720 it = new QTableWidgetItem(url.userInfo());
1721 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1722 _mountPointsTable->setItem(iRow, 0, it);
1723
1724 it = new QTableWidgetItem(fullPath);
1725 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1726 _mountPointsTable->setItem(iRow, 1, it);
1727
1728 it = new QTableWidgetItem(format);
1729 _mountPointsTable->setItem(iRow, 2, it);
1730
1731 it = new QTableWidgetItem(country);
1732 _mountPointsTable->setItem(iRow, 3, it);
1733
1734 if (nmea == "yes") {
1735 it = new QTableWidgetItem(latitude);
1736 _mountPointsTable->setItem(iRow, 4, it);
1737 it = new QTableWidgetItem(longitude);
1738 _mountPointsTable->setItem(iRow, 5, it);
1739 } else {
1740 it = new QTableWidgetItem(latitude);
1741 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1742 _mountPointsTable->setItem(iRow, 4, it);
1743 it = new QTableWidgetItem(longitude);
1744 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1745 _mountPointsTable->setItem(iRow, 5, it);
1746 }
1747
1748 it = new QTableWidgetItem(nmea);
1749 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1750 _mountPointsTable->setItem(iRow, 6, it);
1751
1752 it = new QTableWidgetItem(ntripVersion);
1753 ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1754 _mountPointsTable->setItem(iRow, 7, it);
1755
1756 bncTableItem* bncIt = new bncTableItem();
1757 _mountPointsTable->setItem(iRow, 8, bncIt);
1758
1759 iRow++;
1760 }
1761 _mountPointsTable->hideColumn(0);
1762 _mountPointsTable->hideColumn(3);
1763 _mountPointsTable->sortItems(1);
1764 delete mountPoints;
1765
1766 enableStartStop();
1767}
1768
1769// Save Options (serialize)
1770////////////////////////////////////////////////////////////////////////////
1771void bncWindow::slotSaveOptions() {
1772 saveOptions();
1773 bncSettings settings;
1774 settings.sync();
1775}
1776
1777// Save Options (memory only)
1778////////////////////////////////////////////////////////////////////////////
1779void bncWindow::saveOptions() {
1780
1781 QStringList mountPoints;
1782 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1783
1784 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1785 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1786 "@" + _mountPointsTable->item(iRow, 1)->text() );
1787
1788 mountPoints.append(url.toString() + " " +
1789 _mountPointsTable->item(iRow, 2)->text()
1790 + " " + _mountPointsTable->item(iRow, 3)->text()
1791 + " " + _mountPointsTable->item(iRow, 4)->text()
1792 + " " + _mountPointsTable->item(iRow, 5)->text()
1793 + " " + _mountPointsTable->item(iRow, 6)->text()
1794 + " " + _mountPointsTable->item(iRow, 7)->text());
1795 } else {
1796 mountPoints.append(
1797 "//" + _mountPointsTable->item(iRow, 1)->text()
1798 + " " + _mountPointsTable->item(iRow, 2)->text()
1799 + " " + _mountPointsTable->item(iRow, 3)->text()
1800 + " " + _mountPointsTable->item(iRow, 4)->text()
1801 + " " + _mountPointsTable->item(iRow, 5)->text()
1802 + " " + _mountPointsTable->item(iRow, 6)->text()
1803 + " " + _mountPointsTable->item(iRow, 7)->text());
1804 }
1805 }
1806
1807 QStringList cmbStreams;
1808 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1809 QString hlp;
1810 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1811 if (_cmbTable->item(iRow, iCol)) {
1812 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1813 }
1814 }
1815 if (!hlp.isEmpty()) {
1816 cmbStreams << hlp;
1817 }
1818 }
1819
1820 QStringList uploadMountpointsOut;
1821 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1822 QString hlp;
1823 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1824 if (_uploadTable->cellWidget(iRow, iCol) &&
1825 (iCol == 3 || iCol == 4 || iCol == 5)) {
1826 if (iCol == 3) {
1827 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1828 hlp += passwd->text() + ",";
1829 }
1830 else if (iCol == 4) {
1831 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1832 hlp += system->currentText() + ",";
1833 }
1834 else if (iCol == 5) {
1835 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1836 QString state; state.setNum(com->checkState());
1837 hlp += state + ",";
1838 }
1839 }
1840 else if (_uploadTable->item(iRow, iCol)) {
1841 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1842 }
1843 }
1844 if (!hlp.isEmpty()) {
1845 uploadMountpointsOut << hlp;
1846 }
1847 }
1848
1849 bncSettings settings;
1850
1851 settings.setValue("startTab", _aogroup->currentIndex());
1852 settings.setValue("statusTab", _loggroup->currentIndex());
1853 settings.setValue("mountPoints", mountPoints);
1854// Network
1855 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1856 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1857 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1858 settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1859// General
1860 settings.setValue("logFile", _logFileLineEdit->text());
1861 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1862 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1863 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1864 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1865// RINEX Observations
1866 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1867 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1868 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1869 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1870 settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1871 settings.setValue("rnxV3filenames",_rnxV3filenameCheckBox->checkState());
1872 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1873 (_rnxV3filenameCheckBox->checkState()) ?
1874 settings.setValue("rnxV3", _rnxV3filenameCheckBox->checkState()) :
1875 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1876 settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1877// RINEX Ephemeris
1878 settings.setValue("ephPath", _ephPathLineEdit->text());
1879 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1880 settings.setValue("ephOutPort", _ephOutPortLineEdit->text());
1881 settings.setValue("ephV3filenames", _ephV3filenameCheckBox->checkState());
1882 (_ephV3filenameCheckBox->checkState()) ?
1883 settings.setValue("ephV3", _ephV3filenameCheckBox->checkState()) :
1884 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1885// Broadcast Corrections
1886 settings.setValue("corrPath", _corrPathLineEdit->text());
1887 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1888 settings.setValue("corrPort", _corrPortLineEdit->text());
1889// Feed Engine
1890 settings.setValue("outPort", _outPortLineEdit->text());
1891 settings.setValue("outWait", _outWaitSpinBox->value());
1892 settings.setValue("outSampl", _outSamplSpinBox->value());
1893 settings.setValue("outFile", _outFileLineEdit->text());
1894 settings.setValue("outUPort", _outUPortLineEdit->text());
1895// Serial Output
1896 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1897 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1898 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1899 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1900 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1901 settings.setValue("serialParity", _serialParityComboBox->currentText());
1902 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1903 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1904 settings.setValue("serialFileNMEA", _serialFileNMEALineEdit->text());
1905 settings.setValue("serialHeightNMEA", _serialHeightNMEALineEdit->text());
1906 settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1907// Outages
1908 settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1909 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1910 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1911 settings.setValue("adviseScript", _adviseScriptLineEdit->text());
1912// Miscellaneous
1913 settings.setValue("miscMount", _miscMountLineEdit->text());
1914 settings.setValue("miscPort", _miscPortLineEdit->text());
1915 settings.setValue("miscIntr", _miscIntrComboBox->currentText());
1916 settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1917// Reqc
1918 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1919 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1920 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1921 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1922 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1923 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1924 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1925 settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1926 settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1927// SP3 Comparison
1928 settings.setValue("sp3CompFile", _sp3CompFileChooser->fileName());
1929 settings.setValue("sp3CompExclude", _sp3CompExclude->text());
1930 settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1931// Combine Corrections
1932 if (!cmbStreams.isEmpty()) {
1933 settings.setValue("cmbStreams", cmbStreams);
1934 }
1935 else {
1936 settings.setValue("cmbStreams", "");
1937 }
1938 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1939 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1940 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1941 settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1942// Upload Corrections
1943 if (!uploadMountpointsOut.isEmpty()) {
1944 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1945 }
1946 else {
1947 settings.setValue("uploadMountpointsOut", "");
1948 }
1949 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1950 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1951 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1952 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1953 settings.setValue("uploadAntexFile", _uploadAntexFile->fileName());
1954// Upload Ephemeris
1955 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1956 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1957 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1958 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1959 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1960
1961 if (_caster) {
1962 _caster->readMountPoints();
1963 }
1964
1965 _pppWidgets.saveOptions();
1966}
1967
1968// All get slots terminated
1969////////////////////////////////////////////////////////////////////////////
1970void bncWindow::slotGetThreadsFinished() {
1971 BNC_CORE->slotMessage("All Get Threads Terminated", true);
1972 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
1973 delete _casterEph; _casterEph = 0;
1974 _runningRealTime = false;
1975}
1976
1977// Start It!
1978////////////////////////////////////////////////////////////////////////////
1979void bncWindow::slotStart() {
1980 saveOptions();
1981 if ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1982 _runningPPP = true;
1983 enableStartStop();
1984 _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1985 BNC_CORE->startPPP();
1986 _bncFigurePPP->reset();
1987 }
1988 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1989 if (_reqcActionComboBox->currentText() == "Analyze") {
1990 _runningQC = true;
1991 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1992 connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1993 reqcAnalyze->start();
1994 }
1995 else {
1996 _runningEdit = true;
1997 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1998 connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1999 reqcEdit->start();
2000 }
2001 enableStartStop();
2002 }
2003 else if (!_sp3CompFileChooser->fileName().isEmpty()) {
2004 _runningSp3Comp = true;
2005 t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2006 connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2007 sp3Comp->start();
2008 enableStartStop();
2009 }
2010 else {
2011 startRealTime();
2012 BNC_CORE->startPPP();
2013 }
2014}
2015
2016// Start Real-Time (Retrieve Data etc.)
2017////////////////////////////////////////////////////////////////////////////
2018void bncWindow::startRealTime() {
2019
2020 _runningRealTime = true;
2021
2022 _bncFigurePPP->reset();
2023
2024 _actDeleteMountPoints->setEnabled(false);
2025
2026 enableStartStop();
2027
2028 _caster = new bncCaster();
2029
2030 BNC_CORE->setCaster(_caster);
2031 BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2032 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2033 BNC_CORE->initCombination();
2034
2035 connect(_caster, SIGNAL(getThreadsFinished()),
2036 this, SLOT(slotGetThreadsFinished()));
2037
2038 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2039 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2040
2041 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION" ("BNC_OS") ==========", true);
2042
2043 bncSettings settings;
2044
2045 // Active panels
2046 // -------------
2047 if (!_rnxPathLineEdit->text().isEmpty())
2048 BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2049 if (!_ephPathLineEdit->text().isEmpty())
2050 BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2051 if (!_corrPathLineEdit->text().isEmpty())
2052 BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2053 if (!_outPortLineEdit->text().isEmpty())
2054 BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2055 if (!_serialMountPointLineEdit->text().isEmpty())
2056 BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2057 if (!_adviseObsRateComboBox->currentText().isEmpty())
2058 BNC_CORE->slotMessage("Panel 'Outages' active", true);
2059 if (!_miscMountLineEdit->text().isEmpty())
2060 BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2061 if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2062 BNC_CORE->slotMessage("Panel 'PPP' active", true);
2063 if (_cmbTable->rowCount() > 0)
2064 BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2065 if (_uploadTable->rowCount() > 0)
2066 BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2067 if (!_uploadEphHostLineEdit->text().isEmpty())
2068 BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2069
2070 QDir rnxdir(settings.value("rnxPath").toString());
2071 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2072
2073 QString rnx_file = settings.value("rnxScript").toString();
2074 if ( !rnx_file.isEmpty() ) {
2075 QFile rnxfile(settings.value("rnxScript").toString());
2076 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2077 }
2078
2079 QDir ephdir(settings.value("ephPath").toString());
2080 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2081
2082 QDir corrdir(settings.value("corrPath").toString());
2083 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2084
2085 QString advise_file = settings.value("adviseScript").toString();
2086 if ( !advise_file.isEmpty() ) {
2087 QFile advisefile(settings.value("adviseScript").toString());
2088 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2089 }
2090
2091 _caster->readMountPoints();
2092
2093 _casterEph = new bncEphUploadCaster();
2094 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2095 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2096}
2097
2098// Retrieve Data
2099////////////////////////////////////////////////////////////////////////////
2100void bncWindow::slotStop() {
2101 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2102 QMessageBox::Yes, QMessageBox::No,
2103 QMessageBox::NoButton);
2104 if (iRet == QMessageBox::Yes) {
2105 BNC_CORE->stopPPP();
2106 BNC_CORE->stopCombination();
2107 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2108 delete _casterEph; _casterEph = 0;
2109 _runningRealTime = false;
2110 _runningPPP = false;
2111 enableStartStop();
2112 }
2113}
2114
2115// Close Application gracefully
2116////////////////////////////////////////////////////////////////////////////
2117void bncWindow::closeEvent(QCloseEvent* event) {
2118
2119 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2120 QMessageBox::Yes, QMessageBox::No,
2121 QMessageBox::Cancel);
2122
2123 if (iRet == QMessageBox::Cancel) {
2124 event->ignore();
2125 return;
2126 }
2127 else if (iRet == QMessageBox::Yes) {
2128 slotSaveOptions();
2129 }
2130
2131 BNC_CORE->stopPPP();
2132
2133 QMainWindow::closeEvent(event);
2134}
2135
2136// User changed the selection of mountPoints
2137////////////////////////////////////////////////////////////////////////////
2138void bncWindow::slotSelectionChanged() {
2139 if (_mountPointsTable->selectedItems().isEmpty()) {
2140 _actDeleteMountPoints->setEnabled(false);
2141 }
2142 else {
2143 _actDeleteMountPoints->setEnabled(true);
2144 }
2145}
2146
2147// Display Program Messages
2148////////////////////////////////////////////////////////////////////////////
2149void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2150 if (showOnScreen ) {
2151 _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2152 }
2153}
2154
2155// About Message
2156////////////////////////////////////////////////////////////////////////////
2157void bncWindow::slotAbout() {
2158 new bncAboutDlg(0);
2159}
2160
2161//Flowchart
2162////////////////////////////////////////////////////////////////////////////
2163void bncWindow::slotFlowchart() {
2164 new bncFlowchartDlg(0);
2165}
2166
2167// Help Window
2168////////////////////////////////////////////////////////////////////////////
2169void bncWindow::slotHelp() {
2170 QUrl url;
2171 url.setPath(":bnchelp.html");
2172 new bncHlpDlg(0, url);
2173}
2174
2175// Select Fonts
2176////////////////////////////////////////////////////////////////////////////
2177void bncWindow::slotFontSel() {
2178 bool ok;
2179 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2180 if (ok) {
2181 bncSettings settings;
2182 settings.setValue("font", newFont.toString());
2183 QApplication::setFont(newFont);
2184 int ww = QFontMetrics(newFont).width('w');
2185 setMinimumSize(60*ww, 80*ww);
2186 resize(60*ww, 80*ww);
2187 }
2188}
2189
2190// Whats This Help
2191void bncWindow::slotWhatsThis() {
2192 QWhatsThis::enterWhatsThisMode();
2193}
2194
2195//
2196////////////////////////////////////////////////////////////////////////////
2197void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2198 _threads = threads;
2199
2200 _bncFigure->updateMountPoints();
2201 _bncFigureLate->updateMountPoints();
2202
2203 populateMountPointsTable();
2204 bncSettings settings;
2205 _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2206 _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2207 QListIterator<bncGetThread*> iTh(threads);
2208 while (iTh.hasNext()) {
2209 bncGetThread* thread = iTh.next();
2210 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2211 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2212 "@" + _mountPointsTable->item(iRow, 1)->text() );
2213 if (url == thread->mountPoint() &&
2214 _mountPointsTable->item(iRow, 4)->text() == thread->latitude() &&
2215 _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2216 ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2217 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2218 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2219 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2220 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2221 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2222 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2223 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2224 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2225 break;
2226 }
2227 }
2228 }
2229}
2230
2231//
2232////////////////////////////////////////////////////////////////////////////
2233void bncWindow::CreateMenu() {
2234 // Create Menus
2235 // ------------
2236 _menuFile = menuBar()->addMenu(tr("&File"));
2237 _menuFile->addAction(_actFontSel);
2238 _menuFile->addSeparator();
2239 _menuFile->addAction(_actSaveOpt);
2240 _menuFile->addSeparator();
2241 _menuFile->addAction(_actQuit);
2242
2243 _menuHlp = menuBar()->addMenu(tr("&Help"));
2244 _menuHlp->addAction(_actHelp);
2245 _menuHlp->addAction(_actFlowchart);
2246 _menuHlp->addAction(_actAbout);
2247}
2248
2249// Toolbar
2250////////////////////////////////////////////////////////////////////////////
2251void bncWindow::AddToolbar() {
2252 QToolBar* toolBar = new QToolBar;
2253 addToolBar(Qt::BottomToolBarArea, toolBar);
2254 toolBar->setMovable(false);
2255 toolBar->addAction(_actAddMountPoints);
2256 toolBar->addAction(_actDeleteMountPoints);
2257 toolBar->addAction(_actMapMountPoints);
2258 toolBar->addAction(_actStart);
2259 toolBar->addAction(_actStop);
2260 toolBar->addWidget(new QLabel(" "));
2261 toolBar->addAction(_actwhatsthis);
2262}
2263
2264// About
2265////////////////////////////////////////////////////////////////////////////
2266bncAboutDlg::bncAboutDlg(QWidget* parent) :
2267 QDialog(parent) {
2268
2269 QTextBrowser* tb = new QTextBrowser;
2270 QUrl url; url.setPath(":bncabout.html");
2271 tb->setSource(url);
2272 tb->setReadOnly(true);
2273
2274 int ww = QFontMetrics(font()).width('w');
2275 QPushButton* _closeButton = new QPushButton("Close");
2276 _closeButton->setMaximumWidth(10*ww);
2277 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2278
2279 QGridLayout* dlgLayout = new QGridLayout();
2280 QLabel* img = new QLabel();
2281 img->setPixmap(QPixmap(":ntrip-logo.png"));
2282 dlgLayout->addWidget(img, 0,0);
2283 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2284 dlgLayout->addWidget(tb,1,0,1,2);
2285 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2286
2287 setLayout(dlgLayout);
2288 resize(60*ww, 60*ww);
2289 setWindowTitle("About BNC");
2290 show();
2291}
2292
2293//
2294////////////////////////////////////////////////////////////////////////////
2295bncAboutDlg::~bncAboutDlg() {
2296
2297};
2298
2299// Flowchart
2300////////////////////////////////////////////////////////////////////////////
2301bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2302 QDialog(parent) {
2303
2304 int ww = QFontMetrics(font()).width('w');
2305 QPushButton* _closeButton = new QPushButton("Close");
2306 _closeButton->setMaximumWidth(10*ww);
2307 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2308
2309 QGridLayout* dlgLayout = new QGridLayout();
2310 QLabel* img = new QLabel();
2311 img->setPixmap(QPixmap(":bncflowchart.png"));
2312 dlgLayout->addWidget(img, 0,0);
2313 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2314
2315 setLayout(dlgLayout);
2316 setWindowTitle("Flow Chart");
2317 show();
2318}
2319
2320//
2321////////////////////////////////////////////////////////////////////////////
2322bncFlowchartDlg::~bncFlowchartDlg() {
2323};
2324
2325// Enable/Disable Widget (and change its color)
2326////////////////////////////////////////////////////////////////////////////
2327void bncWindow::enableWidget(bool enable, QWidget* widget) {
2328
2329 const static QPalette paletteWhite(QColor(255, 255, 255));
2330 const static QPalette paletteGray(QColor(230, 230, 230));
2331
2332 widget->setEnabled(enable);
2333 if (enable) {
2334 widget->setPalette(paletteWhite);
2335 }
2336 else {
2337 widget->setPalette(paletteGray);
2338 }
2339}
2340
2341// Bnc Text
2342////////////////////////////////////////////////////////////////////////////
2343void bncWindow::slotBncTextChanged(){
2344
2345 const static QPalette paletteWhite(QColor(255, 255, 255));
2346 const static QPalette paletteGray(QColor(230, 230, 230));
2347
2348 bool enable = true;
2349
2350 // Proxy
2351 //------
2352 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2353 enable = !_proxyHostLineEdit->text().isEmpty();
2354 enableWidget(enable, _proxyPortLineEdit);
2355 }
2356
2357 // RINEX Observations
2358 // ------------------
2359 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2360 enable = !_rnxPathLineEdit->text().isEmpty();
2361 enableWidget(enable, _rnxIntrComboBox);
2362 enableWidget(enable, _rnxSamplSpinBox);
2363 enableWidget(enable, _rnxSkelLineEdit);
2364 enableWidget(enable, _rnxFileCheckBox);
2365 enableWidget(enable, _rnxScrpLineEdit);
2366 enableWidget(enable, _rnxV2Priority);
2367 enableWidget(enable, _rnxV3CheckBox);
2368
2369 bool enable1 = true;
2370 enable1 = _rnxV3CheckBox->isChecked();
2371 if (enable && enable1) {
2372 enableWidget(false, _rnxV2Priority);
2373 }
2374 if (enable && !enable1) {
2375 enableWidget(true, _rnxV2Priority);
2376 }
2377 }
2378
2379 // RINEX Observations, Signal Priority
2380 // -----------------------------------
2381 if (sender() == 0 || sender() == _rnxV3CheckBox) {
2382 if (!_rnxPathLineEdit->text().isEmpty()) {
2383 enableWidget(enable, _rnxIntrComboBox);
2384 enable = !_rnxV3CheckBox->isChecked();
2385 enableWidget(enable, _rnxV2Priority);
2386 }
2387 }
2388
2389 // RINEX Ephemeris
2390 // ---------------
2391 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2392 enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2393 enableWidget(enable, _ephIntrComboBox);
2394 enableWidget(enable, _ephV3CheckBox);
2395 enableWidget(enable, _ephV3filenameCheckBox);
2396 }
2397
2398 // Broadcast Corrections
2399 // ---------------------
2400 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2401 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2402 enableWidget(enable, _corrIntrComboBox);
2403 }
2404
2405 // Feed Engine
2406 // -----------
2407 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2408 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2409 enableWidget(enable, _outWaitSpinBox);
2410 enableWidget(enable, _outSamplSpinBox);
2411 }
2412
2413 // Serial Output
2414 // -------------
2415 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2416 sender() == _serialAutoNMEAComboBox) {
2417 enable = !_serialMountPointLineEdit->text().isEmpty();
2418 enableWidget(enable, _serialPortNameLineEdit);
2419 enableWidget(enable, _serialBaudRateComboBox);
2420 enableWidget(enable, _serialParityComboBox);
2421 enableWidget(enable, _serialDataBitsComboBox);
2422 enableWidget(enable, _serialStopBitsComboBox);
2423 enableWidget(enable, _serialFlowControlComboBox);
2424 enableWidget(enable, _serialAutoNMEAComboBox);
2425 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2426 enableWidget(enable2, _serialFileNMEALineEdit);
2427 bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2428 enableWidget(enable3, _serialHeightNMEALineEdit);
2429 enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2430 }
2431
2432 // Outages
2433 // -------
2434 if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2435 enable = !_adviseObsRateComboBox->currentText().isEmpty();
2436 enableWidget(enable, _adviseFailSpinBox);
2437 enableWidget(enable, _adviseRecoSpinBox);
2438 enableWidget(enable, _adviseScriptLineEdit);
2439 }
2440
2441 // Miscellaneous
2442 // -------------
2443 if (sender() == 0 || sender() == _miscMountLineEdit) {
2444 enable = !_miscMountLineEdit->text().isEmpty();
2445 enableWidget(enable, _miscIntrComboBox);
2446 enableWidget(enable, _miscScanRTCMCheckBox);
2447 enableWidget(enable, _miscPortLineEdit);
2448 }
2449
2450 // Enable/disable Broadcast Ephemerides
2451 // ------------------------------------
2452 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2453 enable = !_uploadEphHostLineEdit->text().isEmpty();
2454 enableWidget(enable, _uploadEphPortLineEdit);
2455 enableWidget(enable, _uploadEphMountpointLineEdit);
2456 enableWidget(enable, _uploadEphPasswordLineEdit);
2457 enableWidget(enable, _uploadEphSampleSpinBox);
2458 }
2459
2460 // Combine Corrections
2461 // -------------------
2462 if (sender() == 0 || sender() == _cmbTable) {
2463 int iRow = _cmbTable->rowCount();
2464 if (iRow > 0) {
2465 enableWidget(true, _cmbMethodComboBox);
2466 enableWidget(true, _cmbMaxresLineEdit);
2467 enableWidget(true, _cmbSamplSpinBox);
2468 enableWidget(true, _cmbUseGlonass);
2469 }
2470 else {
2471 enableWidget(false, _cmbMethodComboBox);
2472 enableWidget(false, _cmbMaxresLineEdit);
2473 enableWidget(false, _cmbSamplSpinBox);
2474 enableWidget(false, _cmbUseGlonass);
2475 }
2476 }
2477
2478 // Upload(clk)
2479 // -----------
2480 int iRow = _uploadTable->rowCount();
2481 if (iRow > 0) {
2482 enableWidget(true, _uploadIntrComboBox);
2483 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2484 enableWidget(true, _uploadSamplClkRnxSpinBox);
2485 enableWidget(true, _uploadSamplSp3SpinBox);
2486 enableWidget(true, _uploadAntexFile);
2487 }
2488 else {
2489 enableWidget(false, _uploadIntrComboBox);
2490 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2491 enableWidget(false, _uploadSamplClkRnxSpinBox);
2492 enableWidget(false, _uploadSamplSp3SpinBox);
2493 enableWidget(false, _uploadAntexFile);
2494 }
2495
2496 // QC
2497 // --
2498 if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2499 enable = !_reqcActionComboBox->currentText().isEmpty();
2500 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2501// bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2502 enableWidget(enable, _reqcObsFileChooser);
2503 enableWidget(enable, _reqcNavFileChooser);
2504 enableWidget(enable, _reqcOutLogLineEdit);
2505 enableWidget(enable && enable10, _reqcEditOptionButton);
2506 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2507 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2508 enableWidget(enable && !enable10, _reqcLogSummaryOnly);
2509 enableWidget(enable && !enable10, _reqcSkyPlotSignals);
2510// enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2511 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2512 }
2513
2514 // SP3 File Comparison
2515 // -------------------
2516 if (sender() == 0 || sender() == _sp3CompFileChooser) {
2517 enable = !_sp3CompFileChooser->fileName().isEmpty();
2518 enableWidget(enable, _sp3CompLogLineEdit);
2519 enableWidget(enable, _sp3CompExclude);
2520 }
2521
2522 enableStartStop();
2523}
2524
2525//
2526////////////////////////////////////////////////////////////////////////////
2527void bncWindow::slotAddCmbRow() {
2528 int iRow = _cmbTable->rowCount();
2529 _cmbTable->insertRow(iRow);
2530 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2531 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2532 }
2533}
2534
2535//
2536////////////////////////////////////////////////////////////////////////////
2537void bncWindow::slotDelCmbRow() {
2538
2539 const static QPalette paletteWhite(QColor(255, 255, 255));
2540 const static QPalette paletteGray(QColor(230, 230, 230));
2541
2542 int nRows = _cmbTable->rowCount();
2543 bool flg[nRows];
2544 for (int iRow = 0; iRow < nRows; iRow++) {
2545 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2546 flg[iRow] = true;
2547 }
2548 else {
2549 flg[iRow] = false;
2550 }
2551 }
2552 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2553 if (flg[iRow]) {
2554 _cmbTable->removeRow(iRow);
2555 }
2556 }
2557 nRows = _cmbTable->rowCount();
2558 if (nRows < 1) {
2559 enableWidget(false, _cmbMethodComboBox);
2560 enableWidget(false, _cmbMaxresLineEdit);
2561 enableWidget(false, _cmbSamplSpinBox);
2562 enableWidget(false, _cmbUseGlonass);
2563 }
2564}
2565
2566//
2567////////////////////////////////////////////////////////////////////////////
2568void bncWindow::populateCmbTable() {
2569
2570 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2571 _cmbTable->removeRow(iRow);
2572 }
2573
2574 bncSettings settings;
2575
2576 int iRow = -1;
2577 QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2578 while (it.hasNext()) {
2579 QStringList hlp = it.next().split(" ");
2580 if (hlp.size() > 2) {
2581 ++iRow;
2582 _cmbTable->insertRow(iRow);
2583 }
2584 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2585 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2586 }
2587 }
2588}
2589
2590//
2591////////////////////////////////////////////////////////////////////////////
2592void bncWindow::slotAddUploadRow() {
2593 int iRow = _uploadTable->rowCount();
2594 _uploadTable->insertRow(iRow);
2595 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2596 if (iCol == 3) {
2597 QLineEdit* passwd = new QLineEdit();
2598 passwd->setFrame(false);
2599 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2600 _uploadTable->setCellWidget(iRow, iCol, passwd);
2601 }
2602 else if (iCol == 4) {
2603 QComboBox* system = new QComboBox();
2604 system->setEditable(false);
2605 system->addItems(QString("IGS14,ETRF2000,NAD83,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2606 system->setFrame(false);
2607 _uploadTable->setCellWidget(iRow, iCol, system);
2608 }
2609 else if (iCol == 5) {
2610 QCheckBox* com = new QCheckBox();
2611 _uploadTable->setCellWidget(iRow, iCol, com);
2612 }
2613 else if (iCol == 11) {
2614 bncTableItem* bncIt = new bncTableItem();
2615 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2616 _uploadTable->setItem(iRow, iCol, bncIt);
2617 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2618 }
2619 else {
2620 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2621 }
2622 }
2623}
2624
2625//
2626////////////////////////////////////////////////////////////////////////////
2627void bncWindow::slotDelUploadRow() {
2628 BNC_CORE->_uploadTableItems.clear();
2629 int nRows = _uploadTable->rowCount();
2630 bool flg[nRows];
2631 for (int iRow = 0; iRow < nRows; iRow++) {
2632 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2633 flg[iRow] = true;
2634 }
2635 else {
2636 flg[iRow] = false;
2637 }
2638 }
2639 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2640 if (flg[iRow]) {
2641 _uploadTable->removeRow(iRow);
2642 }
2643 }
2644 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2645 BNC_CORE->_uploadTableItems[iRow] =
2646 (bncTableItem*) _uploadTable->item(iRow, 11);
2647 }
2648 nRows = _uploadTable->rowCount();
2649 if (nRows < 1) {
2650 enableWidget(false, _uploadIntrComboBox);
2651 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2652 enableWidget(false, _uploadSamplSp3SpinBox);
2653 enableWidget(false, _uploadSamplClkRnxSpinBox);
2654 enableWidget(false, _uploadAntexFile);
2655 }
2656}
2657
2658//
2659////////////////////////////////////////////////////////////////////////////
2660void bncWindow::populateUploadTable() {
2661 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2662 _uploadTable->removeRow(iRow);
2663 }
2664
2665 bncSettings settings;
2666
2667 int iRow = -1;
2668 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2669 while (it.hasNext()) {
2670 QStringList hlp = it.next().split(",");
2671 if (hlp.size() > 6) {
2672 ++iRow;
2673 _uploadTable->insertRow(iRow);
2674 }
2675 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2676 if (iCol == 3) {
2677 QLineEdit* passwd = new QLineEdit();
2678 passwd->setFrame(false);
2679 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2680 passwd->setText(hlp[iCol]);
2681 _uploadTable->setCellWidget(iRow, iCol, passwd);
2682 }
2683 else if (iCol == 4) {
2684 QComboBox* system = new QComboBox();
2685 system->setEditable(false);
2686 system->addItems(QString(",IGS14,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2687 system->setFrame(false);
2688 system->setCurrentIndex(system->findText(hlp[iCol]));
2689 _uploadTable->setCellWidget(iRow, iCol, system);
2690 }
2691 else if (iCol == 5) {
2692 QCheckBox* com = new QCheckBox();
2693 if (hlp[iCol].toInt() == Qt::Checked) {
2694 com->setCheckState(Qt::Checked);
2695 }
2696 _uploadTable->setCellWidget(iRow, iCol, com);
2697 }
2698 else if (iCol == 11) {
2699 bncTableItem* bncIt = new bncTableItem();
2700 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2701 _uploadTable->setItem(iRow, iCol, bncIt);
2702 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2703 }
2704 else {
2705 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2706 }
2707 }
2708 }
2709}
2710
2711//
2712////////////////////////////////////////////////////////////////////////////
2713void bncWindow::slotSetUploadTrafo() {
2714 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2715 dlg->exec();
2716 delete dlg;
2717}
2718
2719// Progress Bar Change
2720////////////////////////////////////////////////////////////////////////////
2721void bncWindow::slotPostProcessingProgress(int nEpo) {
2722 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2723}
2724
2725// Post-Processing Reqc Finished
2726////////////////////////////////////////////////////////////////////////////
2727void bncWindow::slotPostProcessingFinished() {
2728 delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2729 _runningPPP = false;
2730 _runningEdit = false;
2731 _runningQC = false;
2732 _runningSp3Comp = false;
2733 _actStart->setText(tr("Sta&rt"));
2734 enableStartStop();
2735}
2736
2737// Edit teqc-like editing options
2738////////////////////////////////////////////////////////////////////////////
2739void bncWindow::slotReqcEditOption() {
2740 saveOptions();
2741 reqcDlg* dlg = new reqcDlg(this);
2742 dlg->move(this->pos().x()+50, this->pos().y()+50);
2743 dlg->exec();
2744 delete dlg;
2745}
2746
2747// Enable/Disable Start and Stop Buttons
2748////////////////////////////////////////////////////////////////////////////
2749void bncWindow::enableStartStop() {
2750 if ( running() ) {
2751 _actStart->setEnabled(false);
2752 if (_runningRealTime || _runningPPP) {
2753 _actStop->setEnabled(true);
2754 }
2755 }
2756 else {
2757 _actStart->setEnabled(true);
2758 _actStop->setEnabled(false);
2759 }
2760}
2761
2762// Show Map
2763////////////////////////////////////////////////////////////////////////////
2764void bncWindow::slotMapMountPoints() {
2765 saveOptions();
2766 t_bncMap* bncMap = new t_bncMap(this);
2767 bncMap->setMinimumSize(800, 600);
2768 bncMap->setWindowTitle("Selected Mountpoints");
2769
2770 bncSettings settings;
2771 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2772 while (it.hasNext()) {
2773 QStringList hlp = it.next().split(" ");
2774 if (hlp.size() < 5) continue;
2775 QUrl url(hlp[0]);
2776 double latDeg = hlp[3].toDouble();
2777 double lonDeg = hlp[4].toDouble();
2778 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2779 }
2780
2781 bncMap->show();
2782}
2783
2784// Show Map
2785////////////////////////////////////////////////////////////////////////////
2786void bncWindow::slotMapPPP() {
2787#ifdef QT_WEBKIT
2788 saveOptions();
2789 enableWidget(false, _pppWidgets._mapWinButton);
2790 enableWidget(false, _pppWidgets._useGoogleMap);
2791 enableWidget(false, _pppWidgets._useOpenStreetMap);
2792 enableWidget(false, _pppWidgets._mapWinDotSize);
2793 enableWidget(false, _pppWidgets._mapWinDotColor);
2794
2795 if (!_mapWin) {
2796 _mapWin = new bncMapWin(this);
2797 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2798 connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2799 _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2800 }
2801 _mapWin->show();
2802#else
2803 QMessageBox::information(this, "Information",
2804 "Qt Library compiled without QtWebKit");
2805#endif
2806}
2807
2808// Show Map
2809////////////////////////////////////////////////////////////////////////////
2810void bncWindow::slotMapPPPClosed() {
2811#ifdef QT_WEBKIT
2812 enableWidget(true, _pppWidgets._mapWinButton);
2813 enableWidget(true, _pppWidgets._useGoogleMap);
2814 enableWidget(true, _pppWidgets._useOpenStreetMap);
2815 enableWidget(true, _pppWidgets._mapWinDotSize);
2816 enableWidget(true, _pppWidgets._mapWinDotColor);
2817 if (_mapWin) {
2818 QListIterator<bncGetThread*> it(_threads);
2819 while (it.hasNext()) {
2820 bncGetThread* thread = it.next();
2821 thread->disconnect(_mapWin);
2822 }
2823 _mapWin->deleteLater();
2824 _mapWin = 0;
2825 }
2826#endif
2827}
Note: See TracBrowser for help on using the repository browser.