source: ntrip/branches/BNC_2.12/ChangeLog.txt@ 9208

Last change on this file since 9208 was 9208, checked in by stuerze, 20 months ago

changeLog entry added

  • Property svn:eol-style set to native
  • Property svn:mime-type set to text/plain
File size: 10.8 KB
Line 
1--------------------------------------------------------------------------------
2 BNC VERSION 2.12.15 (??.11.2020)
3--------------------------------------------------------------------------------
4 FIXED (03.11.2020): cleanup of the example configurations
5 ADDED (31.10.2020): ephemeris checks and related debugging output
6 ADDED (22.10.2020): check if orbit and clock corrections are out of range
7 FIXED (29.09.2020): small bugfixes regading long mountpoint names
8 in latency check and latency plots,
9 FIXED (29.09.2020): debug output deleted
10 FIXED (29.09.2020): bug in clock rinex header line
11 CHANGED (21.09.2020): cleanup of the relativistic effects w.r.t. IGS-SSR
12
13--------------------------------------------------------------------------------
14 BNC VERSION 2.12.14 (04.09.2020)
15--------------------------------------------------------------------------------
16 CHANGED (02.09.2020): feed engine output format,
17 Lock Time Indicator is replaced by Cycle Slip Counter
18 ADDED (27.08.2020): encoding and decoding of IGS-SSR messages
19 ADDED (24.07.2020): B2b/7D BDS in signal mapping for MSM
20 CHANGED (24.07.2020): IRNSS experimental in official ephemeris message number
21
22--------------------------------------------------------------------------------
23 BNC VERSION 2.12.13 (09.06.2020)
24--------------------------------------------------------------------------------
25 CHANGED (08.06.2020): BDS SSR IOD is changed from 24 into 8 bit with respect
26 to RTCM SSR proposal version 08
27 CHANGED (08.06.2020): BDS and QZSS SSR signal and tracking mode is adapted
28 with respect to RTCM SSR proposal version 08
29 FIXED (30.04.2020): QZSS fit Interval is specified as flag in RINEX 3.04
30
31--------------------------------------------------------------------------------
32 BNC VERSION 2.12.12 (21.01.2020)
33--------------------------------------------------------------------------------
34 ADDED (21.11.2019): GPS and QZSS fit Interval in hours
35 CHAGED (20.11.2019): Epehmeris check
36
37--------------------------------------------------------------------------------
38 BNC VERSION 2.12.11 (08.11.2019)
39--------------------------------------------------------------------------------
40 CHANGED (08.11.2019): Harmonization of RTCM3 Signal ID Mapping and
41 RTCM SSR Signal and Tracking Mode Identifiers
42 for BDS and QZSS
43
44--------------------------------------------------------------------------------
45 BNC VERSION 2.12.10 (02.10.2019)
46--------------------------------------------------------------------------------
47 ADDED (23.09.2019): IRNSS ephemeris support in RTCM3 Encoder
48 ADDED (20.09.2019): IRNSS MSM and ephemeris support in RTCM3 Decoder
49 CHANGED (20.09.2019): RTCM signal mapping IDs for GLONASS
50 CHANGED (01.10.2019): RTCM signal mapping IDs for BDS
51 Basis: RTCM BDSWG proposal from 9/2019 as far as
52 consistent with RINEX version 3.04
53 CHANGED (20.09.2019): up to 64 BDS prn codes are supported now
54 FIXED (20.09.2019): multiple message indicator in SSR messages
55 FIXED (20.09.2019): GLONASS message frame time written into RINEX files
56
57--------------------------------------------------------------------------------
58 BNC VERSION 2.12.9 (20.05.2019)
59--------------------------------------------------------------------------------
60 FIXED (17.05.2019): method to read the RTNET data buffer
61 FIXED (10.05.2019): typo in rtnet2ssr transition for ssr upload
62 CHANGED (13.05.2019): number of possible phase biases for ssr upload
63 are enlaged to 100
64 CHANGED (13.05.2019): default observation types for Galileo
65 CHANGED (10.05.2019): missing phase biases are added within
66 rtnet2ssr transition for ssr upload
67
68--------------------------------------------------------------------------------
69 BNC VERSION 2.12.8 (06.05.2019)
70--------------------------------------------------------------------------------
71 CHANGED (06.05.2019): small but fine changes within the latency checker
72 CHANGED (03.05.2019): Transformation parameters from ITRF2014 into DFREF91
73 CHANGED (30.04.2019): Transformation parameters from ITRF2014 into ETRF2000
74 CHANGED (26.04.2019): GLONASS ephemerides validity is now up to 2 hours.
75 After that, they will be marked as outdated.
76 CHANGED (10.04.2019): Check with respect to wrong observation epochs
77 FIXED (29.04.2019): Bug with respect to GLONASS upload
78 FIXED (26.04.2019): Small Bug in NMEA output
79
80--------------------------------------------------------------------------------
81 BNC VERSION 2.12.7 (03.04.2019)
82--------------------------------------------------------------------------------
83 ADDED (21.03.2019): Updates regarding RINEX Version 3.04
84 ADDED (28.02.2019): Lock time in seconds as an optional feed engine output
85 ADDED (27.09.2018): Possibility to request a user and password
86 detected sourcetable
87 ADDED (19.09.2018): Two more polynomial coefficients of the SSR clock correction
88 message and one more parameter to decribe the SSR URA
89 ADDED (11.12.2017): Decoding of receiver descriptor in MT 1033
90 ADDED (27.11.2017): Satellite health check
91 ADDED (26.10.2017): IRNSS support in RINEX QC
92 CHANGED (06.07.2018): Parameters for transformation of orbit and clock corrections
93 from ITRF 2014 into ETRF2000 and DREF 91,
94 no updated parameters for NDA83 available, hence deleted
95 CHANGED (28.06.2018): Allow 10 Hz observation data processing and re-sampling
96 harmonization of BNCs re-sampling applications
97 CHANGED (23.03.2018): SSR SBAS and BDS satellite IDs with respect to the proposal
98 CHANGED (28.09.2017): Transformation of orbit and clock corrections into ETRF2000,
99 NDA83 or DREF91 is done temporarily via ITRF2008
100 FIXED (29.03.2019): Bug in NMEA checksum
101 FIXED (25.03.2019): Bug in RINEX file concatention
102 FIXED (05.09.2018): Bug in RTCM3 ephemeris message for QZSS
103 FIXED (29.08.2018): Bug in RTCM3 ephemeris message for BDS and SBAS
104 FIXED (28.06.2018): RINEX version 3 filenames for re-sampled files
105 FIXED (11.06.2018): Bug in reqc ephemeris check
106 FIXED (18.05.2018): Bug in RINEX file concatenation
107 FIXED (18.05.2018): Bug in ephemeris upload
108 FIXED (29.03.2018): Bug in ephemeris check
109 FIXED (05.02.2018): Bug in latency check
110 FIXED (13.12.2017): Galileo geocentric gravitational constant is corrected
111 FIXED (17.11.2017): Encoding/decoding of all missing parameters in MT 1020
112 FIXED (23.10.2017): Bug in RTCM3 MSM Decoder
113--------------------------------------------------------------------------------
114 BNC VERSION 2.12.6 (26.09.2017)
115--------------------------------------------------------------------------------
116 FIXED (25.09.2017): GPS SSR Orbit IOD has to be GPS IODE, not IODC
117--------------------------------------------------------------------------------
118 BNC VERSION 2.12.5 (30.08.2017)
119--------------------------------------------------------------------------------
120 CHANGED (29.08.2017): RTCM message number for BDS is updated
121--------------------------------------------------------------------------------
122 BNC VERSION 2.12.4 (10.04.2017)
123--------------------------------------------------------------------------------
124 CHANGED (15.02.2017): SIRGAS2000 transformation parameters adjusted to IGb14
125 CHANGED (10.04.2017): Transformation parameters for ITRF2005 to GDA94 removed
126 CHANGED (10.04.2017): Transformation parameters for ITRF2008 to SIRGAS95 removed
127 CHANGED (10.04.2017): Transformation parameters for ITRF2014 to GDA2020 added
128 FIXED (10.04.2017): Minor bugs to prevent some irregular crashes of BNC
129--------------------------------------------------------------------------------
130 BNC VERSION 2.12.3 (05.09.2016)
131--------------------------------------------------------------------------------
132 ADDED (01.09.2016): Number of allowed SSR biases is enlarged, some future
133 GLONASS signal and tracking mode identifier are added
134 ADDED (08.08.2016): Some informations about the data source is added as
135 comment within the header of RINEX navigation files
136 ADDED (21.07.2016): Frequency specific signal priorities are added for
137 RINEX version 3 to RINEX version 2 conversion
138 ADDED (29.06.2016): Consideration of provioder ID changes in SSR streams
139 during PPP analysis
140 CHANGED (28.07.2016): Small adaptations in qwtpolar sources to allow a
141 successful comilation of BNC on a Rasperry Pi
142 CHANGED (21.07.2016): Default signal priority list
143 CHANGED (08.06.2016): Weighting factor for GLONASS phase observations
144 is now enlarged
145 CHANGED (27.05.2016): RINEX 2.11 ephemeris output for an unknown
146 transmission time is set to 0.000000000000e+00
147 CHANGED (24.05.2016): The real satellite visibility is considered, if the
148 expected observations are computed in RINEX QC
149 FIXED (12.08.2016): Check regarding wrong observation epochs is done during
150 latency check as well to prevent erroneous latencies
151 FIXED (08.06.2016): Map generation from sourcetable entry
152 FIXED (02.06.2016): the approach how to wait for clock corrections
153 in PPP mode, which was well proven in BNC verson 2.11
154 is re-implemented
155 FIXED (30.05.2016): Some NMEA components in PPP output are fixed:
156 time stamp is now UTC, hDop value instead pDop value
157
158--------------------------------------------------------------------------------
159 BNC VERSION 2.12.2 (18.05.2016)
160--------------------------------------------------------------------------------
161 ADDED (18.05.2013): Expected observations in RINEX QC
162 ADDED (12.05.2016): Limits for spherical harmonics/degree order extended
163 FIXED (12.05.2016): Wrong RINEX v2 header line excluded
164
165--------------------------------------------------------------------------------
166 BNC VERSION 2.12.1 (21.04.2016)
167--------------------------------------------------------------------------------
168 FIXED (21.04.2016): RINEX v2 file naming for observation files
169 CHANGED (21.04.2016): Release number is now part of BNC version
170
171--------------------------------------------------------------------------------
172 BNC VERSION 2.12.0 (19.04.2016)
173--------------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.