source: ntrip/branches/BNC_2.11.0/src/bncwindow.cpp@ 6202

Last change on this file since 6202 was 5653, checked in by weber, 10 years ago

Documentation completed
File size: 156.6 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#ifdef QT_WEBKIT
67# include "map/bncmapwin.h"
68#endif
69#ifdef USE_POSTPROCESSING
70# include "rinex/bncpostprocess.h"
71# include "rinex/reqcedit.h"
72# include "rinex/reqcanalyze.h"
73#endif
74
75using namespace std;
76
77#ifdef GNSSCENTER_PLUGIN
78Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
79#endif
80
81// Constructor
82////////////////////////////////////////////////////////////////////////////
83bncWindow::bncWindow() {
84
85#ifdef GNSSCENTER_PLUGIN
86 BNC_CORE->setConfFileName("");
87#endif
88
89 _caster = 0;
90 _casterEph = 0;
91
92 _bncFigure = new bncFigure(this);
93 _bncFigureLate = new bncFigureLate(this);
94 _bncFigurePPP = new bncFigurePPP(this);
95 _runningRealTime = false;
96 _runningPostProcessingPPP = false;
97 _runningPostProcessingReqc = false;
98 _postProcessing = 0;
99
100 _pppSPPComboBox = 0; // necessary for enableStartStop()
101 _reqcActionComboBox = 0; // necessary for enableStartStop()
102
103 _mapWin = 0;
104
105 int ww = QFontMetrics(this->font()).width('w');
106
107 static const QStringList labels = QString("account, Streams: resource loader / mountpoint, decoder, lat, long, nmea, ntrip, bytes").split(",");
108
109 setMinimumSize(85*ww, 65*ww);
110
111 setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
112
113 connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
114 this, SLOT(slotWindowMessage(QByteArray,bool)));
115
116 // Create Actions
117 // --------------
118 _actHelp = new QAction(tr("&Help Contents"),this);
119 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
120
121 _actAbout = new QAction(tr("&About BNC"),this);
122 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
123
124 _actFlowchart = new QAction(tr("&Flow Chart"),this);
125 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
126
127 _actFontSel = new QAction(tr("Select &Font"),this);
128 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
129
130 _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
131 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
132
133 _actQuit = new QAction(tr("&Quit"),this);
134 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
135
136 _actAddMountPoints = new QAction(tr("Add &Stream"),this);
137 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
138
139 _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
140 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
141 _actDeleteMountPoints->setEnabled(false);
142
143 _actMapMountPoints = new QAction(tr("&Map"),this);
144 connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
145
146 _actStart = new QAction(tr("Sta&rt"),this);
147 connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
148
149 _actStop = new QAction(tr("Sto&p"),this);
150 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
151
152 _actwhatsthis= new QAction(tr("Help ?=Shift+F1"),this);
153 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
154
155 CreateMenu();
156 AddToolbar();
157
158 bncSettings settings;
159
160 // Network Options
161 // ---------------
162 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
163 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
164
165 connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
166 this, SLOT(slotBncTextChanged()));
167
168 _sslCaCertPathLineEdit = new QLineEdit(settings.value("sslCaCertPath").toString());
169 _ignoreSslErrorsCheckBox = new QCheckBox();
170 _ignoreSslErrorsCheckBox->setCheckState(Qt::CheckState(
171 settings.value("ignoreSslErrors").toInt()));
172
173 // General Options
174 // ---------------
175 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
176 _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
177 _rnxAppendCheckBox = new QCheckBox();
178 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
179 settings.value("rnxAppend").toInt()));
180 _onTheFlyComboBox = new QComboBox();
181 _onTheFlyComboBox->setEditable(false);
182 _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
183 int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
184 if (ii != -1) {
185 _onTheFlyComboBox->setCurrentIndex(ii);
186 }
187 _autoStartCheckBox = new QCheckBox();
188 _autoStartCheckBox->setCheckState(Qt::CheckState(
189 settings.value("autoStart").toInt()));
190
191 // RINEX Observations Options
192 // --------------------------
193 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
194 _rnxIntrComboBox = new QComboBox();
195 _rnxIntrComboBox->setEditable(false);
196 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
197 ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
198 if (ii != -1) {
199 _rnxIntrComboBox->setCurrentIndex(ii);
200 }
201 _rnxSamplSpinBox = new QSpinBox();
202 _rnxSamplSpinBox->setMinimum(0);
203 _rnxSamplSpinBox->setMaximum(60);
204 _rnxSamplSpinBox->setSingleStep(5);
205 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
206 _rnxSamplSpinBox->setSuffix(" sec");
207 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
208 _rnxSkelLineEdit->setMaximumWidth(5*ww);
209 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
210 _rnxV3CheckBox = new QCheckBox();
211 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
212
213 connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
214 this, SLOT(slotBncTextChanged()));
215
216 // RINEX Ephemeris Options
217 // -----------------------
218 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
219 _ephIntrComboBox = new QComboBox();
220 _ephIntrComboBox->setEditable(false);
221 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
222 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
223 if (jj != -1) {
224 _ephIntrComboBox->setCurrentIndex(jj);
225 }
226 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
227 _ephV3CheckBox = new QCheckBox();
228 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
229
230 connect(_outEphPortLineEdit, SIGNAL(textChanged(const QString &)),
231 this, SLOT(slotBncTextChanged()));
232
233 connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
234 this, SLOT(slotBncTextChanged()));
235
236 // Broadcast Corrections Options
237 // -----------------------------
238 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
239 _corrIntrComboBox = new QComboBox();
240 _corrIntrComboBox->setEditable(false);
241 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
242 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
243 if (mm != -1) {
244 _corrIntrComboBox->setCurrentIndex(mm);
245 }
246 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
247 _corrTimeSpinBox = new QSpinBox();
248 _corrTimeSpinBox->setMinimum(0);
249 _corrTimeSpinBox->setMaximum(60);
250 _corrTimeSpinBox->setSingleStep(1);
251 _corrTimeSpinBox->setSuffix(" sec");
252 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
253
254 connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
255 this, SLOT(slotBncTextChanged()));
256
257 connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
258 this, SLOT(slotBncTextChanged()));
259
260 // Feed Engine Options
261 // -------------------
262 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
263 _waitTimeSpinBox = new QSpinBox();
264 _waitTimeSpinBox->setMinimum(1);
265 _waitTimeSpinBox->setMaximum(30);
266 _waitTimeSpinBox->setSingleStep(1);
267 _waitTimeSpinBox->setSuffix(" sec");
268 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
269 _binSamplSpinBox = new QSpinBox();
270 _binSamplSpinBox->setMinimum(0);
271 _binSamplSpinBox->setMaximum(60);
272 _binSamplSpinBox->setSingleStep(5);
273 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
274 _binSamplSpinBox->setSuffix(" sec");
275 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
276 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
277
278 connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
279 this, SLOT(slotBncTextChanged()));
280
281 connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
282 this, SLOT(slotBncTextChanged()));
283
284 // Serial Output Options
285 // ---------------------
286 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
287 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
288 _serialBaudRateComboBox = new QComboBox();
289 _serialBaudRateComboBox->addItems(QString("110,300,600,"
290 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
291 int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
292 if (kk != -1) {
293 _serialBaudRateComboBox->setCurrentIndex(kk);
294 }
295 _serialFlowControlComboBox = new QComboBox();
296 _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
297 kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
298 if (kk != -1) {
299 _serialFlowControlComboBox->setCurrentIndex(kk);
300 }
301 _serialDataBitsComboBox = new QComboBox();
302 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
303 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
304 if (kk != -1) {
305 _serialDataBitsComboBox->setCurrentIndex(kk);
306 }
307 _serialParityComboBox = new QComboBox();
308 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
309 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
310 if (kk != -1) {
311 _serialParityComboBox->setCurrentIndex(kk);
312 }
313 _serialStopBitsComboBox = new QComboBox();
314 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
315 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
316 if (kk != -1) {
317 _serialStopBitsComboBox->setCurrentIndex(kk);
318 }
319 _serialAutoNMEAComboBox = new QComboBox();
320 _serialAutoNMEAComboBox->addItems(QString("Auto,Manual").split(","));
321 kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
322 if (kk != -1) {
323 _serialAutoNMEAComboBox->setCurrentIndex(kk);
324 }
325 _serialFileNMEALineEdit = new QLineEdit(settings.value("serialFileNMEA").toString());
326 _serialHeightNMEALineEdit = new QLineEdit(settings.value("serialHeightNMEA").toString());
327
328 connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
329 this, SLOT(slotBncTextChanged()));
330
331 connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
332 this, SLOT(slotBncTextChanged()));
333
334 // Outages Options
335 // ---------------
336 _obsRateComboBox = new QComboBox();
337 _obsRateComboBox->setEditable(false);
338 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
339 kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
340 if (kk != -1) {
341 _obsRateComboBox->setCurrentIndex(kk);
342 }
343 _adviseFailSpinBox = new QSpinBox();
344 _adviseFailSpinBox->setMinimum(0);
345 _adviseFailSpinBox->setMaximum(60);
346 _adviseFailSpinBox->setSingleStep(1);
347 _adviseFailSpinBox->setSuffix(" min");
348 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
349 _adviseRecoSpinBox = new QSpinBox();
350 _adviseRecoSpinBox->setMinimum(0);
351 _adviseRecoSpinBox->setMaximum(60);
352 _adviseRecoSpinBox->setSingleStep(1);
353 _adviseRecoSpinBox->setSuffix(" min");
354 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
355 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
356
357 connect(_obsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
358 this, SLOT(slotBncTextChanged()));
359
360 // Miscellaneous Options
361 // ---------------------
362 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
363 _miscPortLineEdit = new QLineEdit(settings.value("miscPort").toString());
364 _perfIntrComboBox = new QComboBox();
365 _perfIntrComboBox->setEditable(false);
366 _perfIntrComboBox->addItems(QString(",2 sec, 10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
367 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
368 if (ll != -1) {
369 _perfIntrComboBox->setCurrentIndex(ll);
370 }
371 _scanRTCMCheckBox = new QCheckBox();
372 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
373 settings.value("scanRTCM").toInt()));
374
375 connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
376 this, SLOT(slotBncTextChanged()));
377
378 // PPP Options
379 // -----------
380 _pppMountLineEdit = new QLineEdit(settings.value("pppMount").toString());
381 _pppMountLineEdit->setMaximumWidth(8*ww);
382 _pppCorrMountLineEdit = new QLineEdit(settings.value("pppCorrMount").toString());
383 _pppMountLineEdit->setMinimumWidth(8*ww);
384 _pppCorrMountLineEdit->setMinimumWidth(8*ww);
385 _pppCorrMountLineEdit->setMaximumWidth(8*ww);
386 _pppNMEALineEdit = new QLineEdit(settings.value("nmeaFile").toString());
387 _pppNMEALineEdit->setMinimumWidth(15*ww);
388 _pppNMEAPortLineEdit = new QLineEdit(settings.value("nmeaPort").toString());
389 _pppNMEAPortLineEdit->setMaximumWidth(8*ww);
390 _pppNMEAPortLineEdit->setMinimumWidth(8*ww);
391 _pppSigCLineEdit = new QLineEdit(settings.value("pppSigmaCode").toString());
392 _pppSigPLineEdit = new QLineEdit(settings.value("pppSigmaPhase").toString());
393 _pppSigCrd0 = new QLineEdit(settings.value("pppSigCrd0").toString());
394 _pppSigCrdP = new QLineEdit(settings.value("pppSigCrdP").toString());
395 _pppSigTrp0 = new QLineEdit(settings.value("pppSigTrp0").toString());
396 _pppSigTrpP = new QLineEdit(settings.value("pppSigTrpP").toString());
397 _pppAverageLineEdit = new QLineEdit(settings.value("pppAverage").toString());
398 _pppQuickStartLineEdit = new QLineEdit(settings.value("pppQuickStart").toString());
399 _pppMaxSolGapLineEdit = new QLineEdit(settings.value("pppMaxSolGap").toString());
400 _pppAudioResponseLineEdit = new QLineEdit(settings.value("pppAudioResponse").toString());
401 _pppRefCrdXLineEdit = new QLineEdit(settings.value("pppRefCrdX").toString());
402 _pppRefCrdYLineEdit = new QLineEdit(settings.value("pppRefCrdY").toString());
403 _pppRefCrdZLineEdit = new QLineEdit(settings.value("pppRefCrdZ").toString());
404 _pppRefdNLineEdit = new QLineEdit(settings.value("pppRefdN").toString());
405 _pppRefdELineEdit = new QLineEdit(settings.value("pppRefdE").toString());
406 _pppRefdULineEdit = new QLineEdit(settings.value("pppRefdU").toString());
407 _pppSync = new QLineEdit(settings.value("pppSync").toString());
408 _pppAntexFileChooser = new qtFileChooser;
409 _pppAntexFileChooser->setMinimumWidth(12*ww);
410 _pppAntennaLineEdit = new QLineEdit(settings.value("pppAntenna").toString());
411 _pppAntexFileChooser->setFileName(settings.value("pppAntex").toString());
412
413 _pppSPPComboBox = new QComboBox();
414 _pppSPPComboBox->setEditable(false);
415 _pppSPPComboBox->addItems(QString(",Realtime-PPP,Realtime-SPP,Post-Processing").split(","));
416 int ik = _pppSPPComboBox->findText(settings.value("pppSPP").toString());
417 if (ik != -1) {
418 _pppSPPComboBox->setCurrentIndex(ik);
419 }
420 _pppUsePhaseCheckBox = new QCheckBox();
421 _pppUsePhaseCheckBox->setCheckState(Qt::CheckState(
422 settings.value("pppUsePhase").toInt()));
423 _pppEstTropoCheckBox = new QCheckBox();
424 _pppEstTropoCheckBox->setCheckState(Qt::CheckState(
425 settings.value("pppEstTropo").toInt()));
426 _pppGLONASSCheckBox = new QCheckBox();
427 _pppGLONASSCheckBox->setCheckState(Qt::CheckState(
428 settings.value("pppGLONASS").toInt()));
429 _pppGalileoCheckBox = new QCheckBox();
430 _pppGalileoCheckBox->setCheckState(Qt::CheckState(
431 settings.value("pppGalileo").toInt()));
432
433 connect(_pppMountLineEdit, SIGNAL(textChanged(const QString &)),
434 this, SLOT(slotBncTextChanged()));
435
436 connect(_pppCorrMountLineEdit, SIGNAL(textChanged(const QString &)),
437 this, SLOT(slotBncTextChanged()));
438
439 connect(_pppUsePhaseCheckBox, SIGNAL(stateChanged(int)),
440 this, SLOT(slotBncTextChanged()));
441
442 connect(_pppRefCrdXLineEdit, SIGNAL(textChanged(const QString &)),
443 this, SLOT(slotBncTextChanged()));
444 connect(_pppRefCrdYLineEdit, SIGNAL(textChanged(const QString &)),
445 this, SLOT(slotBncTextChanged()));
446 connect(_pppRefCrdZLineEdit, SIGNAL(textChanged(const QString &)),
447 this, SLOT(slotBncTextChanged()));
448 connect(_pppRefdNLineEdit, SIGNAL(textChanged(const QString &)),
449 this, SLOT(slotBncTextChanged()));
450 connect(_pppRefdELineEdit, SIGNAL(textChanged(const QString &)),
451 this, SLOT(slotBncTextChanged()));
452 connect(_pppRefdULineEdit, SIGNAL(textChanged(const QString &)),
453 this, SLOT(slotBncTextChanged()));
454
455 connect(_pppEstTropoCheckBox, SIGNAL(stateChanged(int)),
456 this, SLOT(slotBncTextChanged()));
457
458 connect(_pppSync, SIGNAL(textChanged(const QString &)),
459 this, SLOT(slotBncTextChanged()));
460
461 connect(_pppSPPComboBox, SIGNAL(currentIndexChanged(const QString &)),
462 this, SLOT(slotBncTextChanged()));
463
464 connect(_pppAntexFileChooser, SIGNAL(fileNameChanged(const QString &)),
465 this, SLOT(slotBncTextChanged()));
466
467 connect(_pppQuickStartLineEdit, SIGNAL(textChanged(const QString &)),
468 this, SLOT(slotBncTextChanged()));
469
470 // Streams
471 // -------
472 _mountPointsTable = new QTableWidget(0,8);
473
474 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
475 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
476 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
477 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
478 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
479 _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
480 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
481 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
482 _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
483_mountPointsTable->setHorizontalHeaderLabels(labels);
484 _mountPointsTable->setGridStyle(Qt::NoPen);
485 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
486 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
487 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
488 _mountPointsTable->hideColumn(0);
489 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
490 SLOT(slotSelectionChanged()));
491 populateMountPointsTable();
492
493 _log = new QTextBrowser();
494 _log->setReadOnly(true);
495
496 // Combine Corrections
497 // -------------------
498 _cmbTable = new QTableWidget(0,3);
499 _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
500 _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
501 _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
502 _cmbTable->setMaximumWidth(30*ww);
503 _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
504 _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
505 _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
506 _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
507 _cmbTable->horizontalHeader()->setStretchLastSection(true);
508 _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
509
510 _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
511
512 _cmbSamplSpinBox = new QSpinBox;
513 _cmbSamplSpinBox->setMinimum(10);
514 _cmbSamplSpinBox->setMaximum(60);
515 _cmbSamplSpinBox->setSingleStep(10);
516 _cmbSamplSpinBox->setMaximumWidth(9*ww);
517 _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
518 _cmbSamplSpinBox->setSuffix(" sec");
519
520 QPushButton* addCmbRowButton = new QPushButton("Add Row");
521 QPushButton* delCmbRowButton = new QPushButton("Delete");
522
523 connect(_cmbTable, SIGNAL(itemSelectionChanged()),
524 SLOT(slotBncTextChanged()));
525
526 _cmbMethodComboBox = new QComboBox();
527 _cmbMethodComboBox->setEditable(false);
528 _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
529 int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
530 if (im != -1) {
531 _cmbMethodComboBox->setCurrentIndex(im);
532 }
533
534 int iRow = _cmbTable->rowCount();
535 if (iRow > 0) {
536 enableWidget(true, _cmbMethodComboBox);
537 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
538 _cmbMaxresLineEdit->setEnabled(true);
539 _cmbSamplSpinBox->setEnabled(true);
540 }
541 else {
542 enableWidget(false, _cmbMethodComboBox);
543 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
544 _cmbMaxresLineEdit->setEnabled(false);
545 _cmbSamplSpinBox->setEnabled(false);
546 }
547
548 // Upload Results
549 // -------------
550 _uploadTable = new QTableWidget(0,12);
551 _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
552 _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
553 _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
554 _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
555 _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
556 _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
557 _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
558 _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
559 _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
560 _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
561 _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
562 _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
563 _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
564 _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
565 _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
566 _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
567 _uploadTable->horizontalHeader()->setStretchLastSection(true);
568 _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
569
570 connect(_uploadTable, SIGNAL(itemSelectionChanged()),
571 SLOT(slotBncTextChanged()));
572
573 QPushButton* addUploadRowButton = new QPushButton("Add Row");
574 QPushButton* delUploadRowButton = new QPushButton("Del Row");
575 QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
576 _uploadIntrComboBox = new QComboBox;
577 _uploadIntrComboBox->setEditable(false);
578 _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
579 ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
580 if (ii != -1) {
581 _uploadIntrComboBox->setCurrentIndex(ii);
582 }
583
584 _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
585 _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
586 _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
587 _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
588 _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
589 _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
590 _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
591
592 _uploadSamplSp3SpinBox = new QSpinBox;
593 _uploadSamplSp3SpinBox->setMinimum(0);
594 _uploadSamplSp3SpinBox->setMaximum(15);
595 _uploadSamplSp3SpinBox->setSingleStep(1);
596 _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
597 _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
598 _uploadSamplSp3SpinBox->setSuffix(" min");
599
600 _uploadSamplClkRnxSpinBox = new QSpinBox;
601 _uploadSamplClkRnxSpinBox->setMinimum(0);
602 _uploadSamplClkRnxSpinBox->setMaximum(60);
603 _uploadSamplClkRnxSpinBox->setSingleStep(5);
604 _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
605 _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
606 _uploadSamplClkRnxSpinBox->setSuffix(" sec");
607
608 int iRowT = _uploadTable->rowCount();
609 if (iRowT > 0) {
610 enableWidget(true, _uploadIntrComboBox);
611 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
612 enableWidget(true, _uploadSamplSp3SpinBox);
613 enableWidget(true, _uploadSamplClkRnxSpinBox);
614 }
615 else {
616 enableWidget(false, _uploadIntrComboBox);
617 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
618 enableWidget(false, _uploadSamplSp3SpinBox);
619 enableWidget(false, _uploadSamplClkRnxSpinBox);
620 }
621
622 // Upload RTCM3 Ephemeris
623 // ----------------------
624 _uploadEphHostLineEdit = new QLineEdit(settings.value("uploadEphHost").toString());
625 _uploadEphPortLineEdit = new QLineEdit(settings.value("uploadEphPort").toString());
626 _uploadEphPasswordLineEdit = new QLineEdit(settings.value("uploadEphPassword").toString());
627 _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
628 _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
629 _uploadEphSampleSpinBox = new QSpinBox;
630 _uploadEphSampleSpinBox->setMinimum(5);
631 _uploadEphSampleSpinBox->setMaximum(60);
632 _uploadEphSampleSpinBox->setSingleStep(5);
633 _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
634 _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
635 _uploadEphSampleSpinBox->setSuffix(" sec");
636 _uploadEphBytesCounter = new bncBytesCounter;
637
638 // Canvas with Editable Fields
639 // ---------------------------
640 _canvas = new QWidget;
641 setCentralWidget(_canvas);
642
643 _aogroup = new QTabWidget();
644 QWidget* pgroup = new QWidget();
645 QWidget* ggroup = new QWidget();
646 QWidget* sgroup = new QWidget();
647 QWidget* egroup = new QWidget();
648 QWidget* agroup = new QWidget();
649 QWidget* cgroup = new QWidget();
650 QWidget* ogroup = new QWidget();
651 QWidget* rgroup = new QWidget();
652 QWidget* sergroup = new QWidget();
653 QWidget* pppgroup = new QWidget();
654 QWidget* ppp2group = new QWidget();
655 QWidget* ppp3group = new QWidget();
656 QWidget* reqcgroup = new QWidget();
657 QWidget* cmbgroup = new QWidget();
658 QWidget* uploadgroup = new QWidget();
659 QWidget* uploadEphgroup = new QWidget();
660 _aogroup->addTab(pgroup,tr("Network"));
661 _aogroup->addTab(ggroup,tr("General"));
662 _aogroup->addTab(ogroup,tr("RINEX Observations"));
663 _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
664 _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
665 _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
666 _aogroup->addTab(sgroup,tr("Feed Engine"));
667 _aogroup->addTab(sergroup,tr("Serial Output"));
668 _aogroup->addTab(agroup,tr("Outages"));
669 _aogroup->addTab(rgroup,tr("Miscellaneous"));
670 _aogroup->addTab(pppgroup,tr("PPP (1)"));
671 _aogroup->addTab(ppp2group,tr("PPP (2)"));
672 _aogroup->addTab(ppp3group,tr("PPP (3)"));
673#ifdef USE_COMBINATION
674 _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
675#endif
676 _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
677 _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
678
679 // Log Tab
680 // -------
681 _loggroup = new QTabWidget();
682 _loggroup->addTab(_log,tr("Log"));
683 _loggroup->addTab(_bncFigure,tr("Throughput"));
684 _loggroup->addTab(_bncFigureLate,tr("Latency"));
685 _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
686
687 // Netowork (Proxy and SSL) Tab
688 // ----------------------------
689 QGridLayout* pLayout = new QGridLayout;
690 pLayout->setColumnMinimumWidth(0,13*ww);
691 _proxyPortLineEdit->setMaximumWidth(9*ww);
692
693 pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none."),0, 0, 1, 50);
694 pLayout->addWidget(new QLabel("Proxy host"), 1, 0);
695 pLayout->addWidget(_proxyHostLineEdit, 1, 1, 1,10);
696 pLayout->addWidget(new QLabel("Proxy port"), 2, 0);
697 pLayout->addWidget(_proxyPortLineEdit, 2, 1);
698 pLayout->addWidget(new QLabel("Path to SSL Certificates"), 3, 0);
699 pLayout->addWidget(_sslCaCertPathLineEdit, 3, 1, 1,10);
700 pLayout->addWidget(new QLabel("Default: " + bncSslConfig::defaultPath()), 3,11, 1,20);
701 pLayout->addWidget(new QLabel("Ignore SSL Authorization Errors"), 4, 0);
702 pLayout->addWidget(_ignoreSslErrorsCheckBox, 4, 1, 1,10);
703 pLayout->addWidget(new QLabel(" "), 4, 0);
704 pLayout->addWidget(new QLabel(" "), 5, 0);
705 pLayout->addWidget(new QLabel(" "), 6, 0);
706 pgroup->setLayout(pLayout);
707
708 // General Tab
709 // -----------
710 QGridLayout* gLayout = new QGridLayout;
711 gLayout->setColumnMinimumWidth(0,14*ww);
712 _onTheFlyComboBox->setMaximumWidth(9*ww);
713
714 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),0, 0, 1, 50);
715 gLayout->addWidget(new QLabel("Logfile (full path)"), 1, 0);
716 gLayout->addWidget(_logFileLineEdit, 1, 1, 1,30);
717 gLayout->addWidget(new QLabel("Append files"), 2, 0);
718 gLayout->addWidget(_rnxAppendCheckBox, 2, 1);
719 gLayout->addWidget(new QLabel("Reread configuration"), 3, 0);
720 gLayout->addWidget(_onTheFlyComboBox, 3, 1);
721 gLayout->addWidget(new QLabel("Auto start"), 4, 0);
722 gLayout->addWidget(_autoStartCheckBox, 4, 1);
723 gLayout->addWidget(new QLabel("Raw output file (full path)"), 5, 0);
724 gLayout->addWidget(_rawOutFileLineEdit, 5, 1, 1,30);
725 gLayout->addWidget(new QLabel(" "), 6, 0);
726 ggroup->setLayout(gLayout);
727
728 // RINEX Observations
729 // ------------------
730 QGridLayout* oLayout = new QGridLayout;
731 oLayout->setColumnMinimumWidth(0,14*ww);
732 _rnxIntrComboBox->setMaximumWidth(9*ww);
733 _rnxSamplSpinBox->setMaximumWidth(9*ww);
734
735 oLayout->addWidget(new QLabel("Saving RINEX observation files."),0, 0, 1,50);
736 oLayout->addWidget(new QLabel("Directory"), 1, 0);
737 oLayout->addWidget(_rnxPathLineEdit, 1, 1, 1,24);
738 oLayout->addWidget(new QLabel("Interval"), 2, 0);
739 oLayout->addWidget(_rnxIntrComboBox, 2, 1);
740 oLayout->addWidget(new QLabel(" Sampling"), 2, 2, Qt::AlignRight);
741 oLayout->addWidget(_rnxSamplSpinBox, 2, 3, Qt::AlignLeft);
742 oLayout->addWidget(new QLabel("Skeleton extension"), 3, 0);
743 oLayout->addWidget(_rnxSkelLineEdit, 3, 1, 1, 1, Qt::AlignLeft);
744 oLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
745 oLayout->addWidget(_rnxScrpLineEdit, 4, 1, 1,24);
746 oLayout->addWidget(new QLabel("Version 3"), 5, 0);
747 oLayout->addWidget(_rnxV3CheckBox, 5, 1);
748 oLayout->addWidget(new QLabel(" "), 6, 0);
749 ogroup->setLayout(oLayout);
750
751 // RINEX Ephemeris
752 // ---------------
753 QGridLayout* eLayout = new QGridLayout;
754 eLayout->setColumnMinimumWidth(0,14*ww);
755 _ephIntrComboBox->setMaximumWidth(9*ww);
756 _outEphPortLineEdit->setMaximumWidth(9*ww);
757
758 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),0,0,1,50);
759 eLayout->addWidget(new QLabel("Directory"), 1, 0);
760 eLayout->addWidget(_ephPathLineEdit, 1, 1, 1,30);
761 eLayout->addWidget(new QLabel("Interval"), 2, 0);
762 eLayout->addWidget(_ephIntrComboBox, 2, 1);
763 eLayout->addWidget(new QLabel("Port"), 3, 0);
764 eLayout->addWidget(_outEphPortLineEdit, 3, 1);
765 eLayout->addWidget(new QLabel("Version 3"), 4, 0);
766 eLayout->addWidget(_ephV3CheckBox, 4, 1);
767 eLayout->addWidget(new QLabel(" "), 5, 0);
768 eLayout->addWidget(new QLabel(" "), 6, 0);
769 egroup->setLayout(eLayout);
770
771
772 // Broadcast Corrections
773 // ---------------------
774 QGridLayout* cLayout = new QGridLayout;
775 cLayout->setColumnMinimumWidth(0,14*ww);
776 _corrIntrComboBox->setMaximumWidth(9*ww);
777 _corrPortLineEdit->setMaximumWidth(9*ww);
778 _corrTimeSpinBox->setMaximumWidth(9*ww);
779
780 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),0,0,1,50);
781 cLayout->addWidget(new QLabel("Directory, ASCII"), 1, 0);
782 cLayout->addWidget(_corrPathLineEdit, 1, 1, 1,20);
783 cLayout->addWidget(new QLabel("Interval"), 2, 0);
784 cLayout->addWidget(_corrIntrComboBox, 2, 1);
785 cLayout->addWidget(new QLabel("Port"), 3, 0);
786 cLayout->addWidget(_corrPortLineEdit, 3, 1);
787 cLayout->addWidget(new QLabel(" Wait for full corr epoch"), 3, 2, Qt::AlignRight);
788 cLayout->addWidget(_corrTimeSpinBox, 3, 3, Qt::AlignLeft);
789 cLayout->addWidget(new QLabel(" "), 4, 0);
790 cLayout->addWidget(new QLabel(" "), 5, 0);
791 cLayout->addWidget(new QLabel(" "), 6, 0);
792 cgroup->setLayout(cLayout);
793
794 // Feed Engine
795 // -----------
796 QGridLayout* sLayout = new QGridLayout;
797 sLayout->setColumnMinimumWidth(0,14*ww);
798 _outPortLineEdit->setMaximumWidth(9*ww);
799 _waitTimeSpinBox->setMaximumWidth(9*ww);
800 _binSamplSpinBox->setMaximumWidth(9*ww);
801 _outUPortLineEdit->setMaximumWidth(9*ww);
802
803 sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine."),0,0,1,50);
804 sLayout->addWidget(new QLabel("Port"), 1, 0);
805 sLayout->addWidget(_outPortLineEdit, 1, 1);
806 sLayout->addWidget(new QLabel("Wait for full obs epoch"), 1, 2, Qt::AlignRight);
807 sLayout->addWidget(_waitTimeSpinBox, 1, 3, Qt::AlignLeft);
808 sLayout->addWidget(new QLabel("Sampling"), 2, 0);
809 sLayout->addWidget(_binSamplSpinBox, 2, 1, Qt::AlignLeft);
810 sLayout->addWidget(new QLabel("File (full path)"), 3, 0);
811 sLayout->addWidget(_outFileLineEdit, 3, 1, 1, 20);
812 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 4, 0);
813 sLayout->addWidget(_outUPortLineEdit, 4, 1);
814 sLayout->addWidget(new QLabel(" "), 5, 0);
815 sLayout->addWidget(new QLabel(" "), 6, 0);
816 sgroup->setLayout(sLayout);
817
818 // Serial Output
819 // -------------
820 QGridLayout* serLayout = new QGridLayout;
821 serLayout->setColumnMinimumWidth(0,14*ww);
822 _serialBaudRateComboBox->setMaximumWidth(9*ww);
823 _serialFlowControlComboBox->setMaximumWidth(11*ww);
824 _serialDataBitsComboBox->setMaximumWidth(5*ww);
825 _serialParityComboBox->setMaximumWidth(9*ww);
826 _serialStopBitsComboBox->setMaximumWidth(5*ww);
827 _serialAutoNMEAComboBox->setMaximumWidth(9*ww);
828 _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
829
830 serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver."),0,0,1,30);
831 serLayout->addWidget(new QLabel("Mountpoint"), 1, 0, Qt::AlignLeft);
832 serLayout->addWidget(_serialMountPointLineEdit, 1, 1, 1, 2);
833 serLayout->addWidget(new QLabel("Port name"), 2, 0, Qt::AlignLeft);
834 serLayout->addWidget(_serialPortNameLineEdit, 2, 1, 1, 2);
835 serLayout->addWidget(new QLabel("Baud rate"), 3, 0, Qt::AlignLeft);
836 serLayout->addWidget(_serialBaudRateComboBox, 3, 1);
837 serLayout->addWidget(new QLabel("Flow control"), 3, 2, Qt::AlignRight);
838 serLayout->addWidget(_serialFlowControlComboBox, 3, 3);
839 serLayout->addWidget(new QLabel("Data bits"), 4, 0, Qt::AlignLeft);
840 serLayout->addWidget(_serialDataBitsComboBox, 4, 1);
841 serLayout->addWidget(new QLabel("Parity"), 4, 2, Qt::AlignRight);
842 serLayout->addWidget(_serialParityComboBox, 4, 3);
843 serLayout->addWidget(new QLabel(" Stop bits"), 4, 4, Qt::AlignRight);
844 serLayout->addWidget(_serialStopBitsComboBox, 4, 5);
845 serLayout->addWidget(new QLabel("NMEA"), 5, 0);
846 serLayout->addWidget(_serialAutoNMEAComboBox, 5, 1);
847 serLayout->addWidget(new QLabel(" File (full path)"), 5, 2, Qt::AlignRight);
848 serLayout->addWidget(_serialFileNMEALineEdit, 5, 3, 1,15);
849 serLayout->addWidget(new QLabel("Height"), 5,20, Qt::AlignRight);
850 serLayout->addWidget(_serialHeightNMEALineEdit, 5,21, 1,11);
851 serLayout->addWidget(new QLabel(" "), 6, 0);
852
853 sergroup->setLayout(serLayout);
854
855 // Outages
856 // -------
857 QGridLayout* aLayout = new QGridLayout;
858 aLayout->setColumnMinimumWidth(0,14*ww);
859 _obsRateComboBox->setMaximumWidth(9*ww);
860 _adviseFailSpinBox->setMaximumWidth(9*ww);
861 _adviseRecoSpinBox->setMaximumWidth(9*ww);
862
863 aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes."),0,0,1,50,Qt::AlignLeft);
864 aLayout->addWidget(new QLabel("Observation rate"), 1, 0);
865 aLayout->addWidget(_obsRateComboBox, 1, 1);
866 aLayout->addWidget(new QLabel("Failure threshold"), 2, 0);
867 aLayout->addWidget(_adviseFailSpinBox, 2, 1);
868 aLayout->addWidget(new QLabel("Recovery threshold"), 3, 0);
869 aLayout->addWidget(_adviseRecoSpinBox, 3, 1);
870 aLayout->addWidget(new QLabel("Script (full path)"), 4, 0);
871 aLayout->addWidget(_adviseScriptLineEdit, 4, 1, 1,30);
872 aLayout->addWidget(new QLabel(" "), 5, 0);
873 aLayout->addWidget(new QLabel(" "), 6, 0);
874 agroup->setLayout(aLayout);
875
876 // Miscellaneous
877 // -------------
878 QGridLayout* rLayout = new QGridLayout;
879 rLayout->setColumnMinimumWidth(0,14*ww);
880 _perfIntrComboBox->setMaximumWidth(9*ww);
881 _miscPortLineEdit->setMaximumWidth(9*ww);
882
883 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port."),0, 0,1,30);
884 rLayout->addWidget(new QLabel("Mountpoint"), 1, 0);
885 rLayout->addWidget(_miscMountLineEdit, 1, 1, 1,7);
886 rLayout->addWidget(new QLabel("Log latency"), 2, 0);
887 rLayout->addWidget(_perfIntrComboBox, 2, 1);
888 rLayout->addWidget(new QLabel("Scan RTCM"), 3, 0);
889 rLayout->addWidget(_scanRTCMCheckBox, 3, 1);
890 rLayout->addWidget(new QLabel("Port"), 4, 0);
891 rLayout->addWidget(_miscPortLineEdit, 4, 1);
892 rLayout->addWidget(new QLabel(" "), 5, 0);
893 rLayout->addWidget(new QLabel(" "), 6, 0);
894 rgroup->setLayout(rLayout);
895
896 // PPP Client
897 // ----------
898 QGridLayout* pppLayout = new QGridLayout;
899 pppLayout->setColumnMinimumWidth(0,14*ww);
900 _pppSigCLineEdit->setMaximumWidth(6*ww);
901 _pppSigPLineEdit->setMaximumWidth(6*ww);
902 _pppSigCrd0->setMaximumWidth(6*ww);
903 _pppSigCrdP->setMaximumWidth(6*ww);
904 _pppSigTrp0->setMaximumWidth(6*ww);
905 _pppSigTrpP->setMaximumWidth(6*ww);
906 _pppAverageLineEdit->setMaximumWidth(6*ww);
907 _pppQuickStartLineEdit->setMaximumWidth(6*ww);
908 _pppMaxSolGapLineEdit->setMaximumWidth(6*ww);
909 _pppAudioResponseLineEdit->setMaximumWidth(6*ww);
910 _pppRefCrdXLineEdit->setMaximumWidth(10*ww);
911 _pppRefCrdYLineEdit->setMaximumWidth(10*ww);
912 _pppRefCrdZLineEdit->setMaximumWidth(10*ww);
913 _pppRefdNLineEdit->setMaximumWidth(6*ww);
914 _pppRefdELineEdit->setMaximumWidth(6*ww);
915 _pppRefdULineEdit->setMaximumWidth(6*ww);
916 _pppSync->setMaximumWidth(6*ww);
917 _pppSPPComboBox->setMinimumWidth(15*ww);
918
919 _postObsFileChooser = new qtFileChooser;
920 _postObsFileChooser->setFileName(settings.value("postObsFile").toString());
921 _postObsFileChooser->setMinimumWidth(15*ww);
922 _postNavFileChooser = new qtFileChooser;
923 _postNavFileChooser->setFileName(settings.value("postNavFile").toString());
924 _postNavFileChooser->setMinimumWidth(15*ww);
925 _postCorrFileChooser = new qtFileChooser;
926 _postCorrFileChooser->setFileName(settings.value("postCorrFile").toString());
927 _postCorrFileChooser->setMinimumWidth(15*ww);
928 _postOutLineEdit = new QLineEdit(settings.value("postOutFile").toString());
929 _postOutLineEdit->setMinimumWidth(15*ww);
930
931 int ir = 0;
932 pppLayout->addWidget(new QLabel("Precise Point Positioning, Panel 1."), ir, 0, 1, 2, Qt::AlignLeft);
933 ++ir;
934 pppLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
935 pppLayout->addWidget(_pppSPPComboBox, ir, 1, Qt::AlignRight);
936 pppLayout->addWidget(_pppMountLineEdit, ir, 3, Qt::AlignRight);
937 pppLayout->addWidget(new QLabel("Obs."), ir, 4, Qt::AlignLeft);
938 pppLayout->addWidget(_pppCorrMountLineEdit, ir, 5, Qt::AlignRight);
939 pppLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
940 ++ir;
941 pppLayout->addWidget(new QLabel("Marker coordinates"), ir, 0, Qt::AlignLeft);
942 pppLayout->addWidget(_pppRefCrdXLineEdit, ir, 1, Qt::AlignRight);
943 pppLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
944 pppLayout->addWidget(_pppRefCrdYLineEdit, ir, 3, Qt::AlignRight);
945 pppLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
946 pppLayout->addWidget(_pppRefCrdZLineEdit, ir, 5, Qt::AlignRight);
947 pppLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
948 ++ir;
949 pppLayout->addWidget(new QLabel("Antenna excentricity"), ir, 0, Qt::AlignLeft);
950 pppLayout->addWidget(_pppRefdNLineEdit, ir, 1, Qt::AlignRight);
951 pppLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
952 pppLayout->addWidget(_pppRefdELineEdit, ir, 3, Qt::AlignRight);
953 pppLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
954 pppLayout->addWidget(_pppRefdULineEdit, ir, 5, Qt::AlignRight);
955 pppLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
956 ++ir;
957 pppLayout->addWidget(new QLabel("NMEA output"), ir, 0, Qt::AlignLeft);
958 pppLayout->addWidget(_pppNMEALineEdit, ir, 1, Qt::AlignRight);
959 pppLayout->addWidget(new QLabel("NMEA File"), ir, 2, Qt::AlignLeft);
960 pppLayout->addWidget(_pppNMEAPortLineEdit, ir, 3, Qt::AlignRight);
961 pppLayout->addWidget(new QLabel("NMEA Port"), ir, 4, Qt::AlignLeft);
962 ++ir;
963 pppLayout->addWidget(new QLabel("Post-processing"), ir, 0, Qt::AlignLeft);
964 pppLayout->addWidget(_postObsFileChooser, ir, 1, Qt::AlignRight);
965 pppLayout->addWidget(new QLabel("Obs "), ir, 2, Qt::AlignLeft);
966 pppLayout->addWidget(_postNavFileChooser, ir, 3, Qt::AlignRight);
967 pppLayout->addWidget(new QLabel("Nav "), ir, 4, Qt::AlignLeft);
968 ++ir;
969 pppLayout->addWidget(_postCorrFileChooser, ir, 1, Qt::AlignRight);
970 pppLayout->addWidget(new QLabel("Corr"), ir, 2, Qt::AlignLeft);
971 pppLayout->addWidget(_postOutLineEdit, ir, 3, Qt::AlignRight);
972 pppLayout->addWidget(new QLabel("Log (full path)"), ir, 4, Qt::AlignLeft);
973
974 pppgroup->setLayout(pppLayout);
975
976 // PPP Client (second panel)
977 // -------------------------
978 QGridLayout* ppp2Layout = new QGridLayout;
979 ppp2Layout->setColumnMinimumWidth(0,14*ww);
980 ir = 0;
981 ppp2Layout->addWidget(new QLabel("Precise Point Positioning, Panel 2."), ir, 0, 1, 10);
982 ++ir;
983 ppp2Layout->addWidget(new QLabel("Antennas"), ir, 0);
984 ppp2Layout->addWidget(_pppAntexFileChooser, ir, 1,1,3);
985 ppp2Layout->addWidget(new QLabel("ANTEX File"), ir, 4);
986 ppp2Layout->addWidget(_pppAntennaLineEdit, ir, 5,1,3);
987 ppp2Layout->addWidget(new QLabel("Antenna Name"), ir, 8);
988 ++ir;
989 ppp2Layout->addWidget(new QLabel("Basics"), ir, 0, 1, 5);
990 ppp2Layout->addWidget(_pppUsePhaseCheckBox, ir, 1, Qt::AlignRight);
991 ppp2Layout->addWidget(new QLabel("Use phase obs"), ir, 2);
992 ppp2Layout->addWidget(_pppEstTropoCheckBox, ir, 3, Qt::AlignRight);
993 ppp2Layout->addWidget(new QLabel("Estimate tropo"), ir, 4);
994 ppp2Layout->addWidget(_pppGLONASSCheckBox, ir, 5, Qt::AlignRight);
995 ppp2Layout->addWidget(new QLabel("Use GLONASS"), ir, 6);
996 ppp2Layout->addWidget(_pppGalileoCheckBox, ir, 7, Qt::AlignRight);
997 ppp2Layout->addWidget(new QLabel("Use Galileo "), ir, 8);
998 ++ir;
999 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1000 ppp2Layout->addWidget(_pppSync, ir, 1);
1001 ppp2Layout->addWidget(new QLabel("Sync Corr (sec) "), ir, 2);
1002 ppp2Layout->addWidget(_pppAverageLineEdit, ir, 3, Qt::AlignRight);
1003 ppp2Layout->addWidget(new QLabel("Averaging (min)") , ir, 4);
1004 ppp2Layout->addWidget(_pppQuickStartLineEdit, ir, 5, Qt::AlignRight);
1005 ppp2Layout->addWidget(new QLabel("Quick-Start (sec) "), ir, 6);
1006 ppp2Layout->addWidget(_pppMaxSolGapLineEdit, ir, 7, Qt::AlignRight);
1007 ppp2Layout->addWidget(new QLabel("Max Sol. Gap (sec)"), ir, 8);
1008 ++ir;
1009 ppp2Layout->addWidget(new QLabel("Basics cont'd"), ir, 0);
1010 ppp2Layout->addWidget(_pppAudioResponseLineEdit, ir, 1, Qt::AlignRight);
1011 ppp2Layout->addWidget(new QLabel("Audio response (m)"), ir, 2);
1012 ++ir;
1013 ppp2Layout->addWidget(new QLabel("Sigmas"), ir, 0);
1014 ppp2Layout->addWidget(_pppSigCLineEdit, ir, 1, Qt::AlignRight);
1015 ppp2Layout->addWidget(new QLabel("Code"), ir, 2);
1016 ppp2Layout->addWidget(_pppSigPLineEdit, ir, 3);
1017 ppp2Layout->addWidget(new QLabel("Phase"), ir, 4);
1018 ++ir;
1019 ppp2Layout->addWidget(new QLabel("Sigmas cont'd"), ir, 0);
1020 ppp2Layout->addWidget(_pppSigCrd0, ir, 1, Qt::AlignRight);
1021 ppp2Layout->addWidget(new QLabel("XYZ Init "), ir, 2);
1022 ppp2Layout->addWidget(_pppSigCrdP, ir, 3, Qt::AlignRight);
1023 ppp2Layout->addWidget(new QLabel("XYZ White Noise "), ir, 4);
1024 ppp2Layout->addWidget(_pppSigTrp0, ir, 5, Qt::AlignRight);
1025 ppp2Layout->addWidget(new QLabel("Tropo Init "), ir, 6);
1026 ppp2Layout->addWidget(_pppSigTrpP, ir, 7);
1027 ppp2Layout->addWidget(new QLabel("Tropo White Noise"), ir, 8);
1028 ++ir;
1029 ppp2Layout->addWidget(new QLabel(""), ir, 0);
1030
1031 ppp2group->setLayout(ppp2Layout);
1032
1033 // PPP Client (third panel)
1034 // ------------------------
1035 QVBoxLayout* ppp3Layout = new QVBoxLayout;
1036 ppp3Layout->addWidget(new QLabel("Precise Point Positioning, Panel 3."));
1037 ppp3Layout->addSpacing(ww);
1038
1039 QHBoxLayout* ppp3LayoutHlp1 = new QHBoxLayout;
1040 _pppPlotCoordinates = new QCheckBox();
1041 _pppPlotCoordinates->setCheckState(Qt::CheckState(settings.value("pppPlotCoordinates").toInt()));
1042 ppp3LayoutHlp1->addWidget(new QLabel("PPP Plot "));
1043 ppp3LayoutHlp1->addWidget(_pppPlotCoordinates);
1044 ppp3LayoutHlp1->addWidget(new QLabel("Nort-East-Up Time Series"));
1045 ppp3LayoutHlp1->addStretch();
1046 ppp3Layout->addLayout(ppp3LayoutHlp1);
1047 ppp3Layout->addSpacing(ww);
1048
1049 QHBoxLayout* ppp3LayoutHlp2 = new QHBoxLayout;
1050 ppp3LayoutHlp2->addWidget(new QLabel("Track Plot "));
1051 _mapWinButton = new QPushButton;
1052 _mapWinButton->setText("Open Map");
1053 connect(_mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1054 ppp3LayoutHlp2->addWidget(_mapWinButton);
1055
1056 ppp3LayoutHlp2->addSpacing(1*ww);
1057
1058 _gmRadioButton = new QRadioButton;
1059 _gmRadioButton->setChecked(!settings.value("useOsmMap").toBool());
1060 ppp3LayoutHlp2->addWidget(new QLabel("Google"));
1061 ppp3LayoutHlp2->addWidget(_gmRadioButton);
1062
1063 _osmRadioButton = new QRadioButton;
1064 _osmRadioButton->setChecked(settings.value("useOsmMap").toBool());
1065 ppp3LayoutHlp2->addWidget(new QLabel("OSM"));
1066 ppp3LayoutHlp2->addWidget(_osmRadioButton);
1067
1068 ppp3LayoutHlp2->addSpacing(3*ww);
1069
1070 _mapWinDotSizeLineEdit = new QLineEdit(settings.value("mapWinDotSize").toString());
1071 ppp3LayoutHlp2->addWidget(new QLabel("Dot Size"));
1072 _mapWinDotSizeLineEdit->setMaximumWidth(5*ww);
1073 ppp3LayoutHlp2->addWidget(_mapWinDotSizeLineEdit);
1074
1075 ppp3LayoutHlp2->addSpacing(3*ww);
1076
1077 _mapWinDotColorComboBox = new QComboBox();
1078 ppp3LayoutHlp2->addWidget(new QLabel("Dot Color"));
1079 _mapWinDotColorComboBox->setEditable(false);
1080 _mapWinDotColorComboBox->addItems(QString("red,yellow").split(","));
1081 ii = _mapWinDotColorComboBox->findText(settings.value("mapWinDotColor").toString());
1082 if (ii != -1) {
1083 _mapWinDotColorComboBox->setCurrentIndex(ii);
1084 }
1085 ppp3LayoutHlp2->addWidget(_mapWinDotColorComboBox);
1086
1087 ppp3LayoutHlp2->addSpacing(3*ww);
1088
1089 _mapSpeedSlider = new QSlider;
1090 _mapSpeedSlider->setOrientation(Qt::Horizontal);
1091 _mapSpeedSlider->setRange(1, 100);
1092 _mapSpeedSlider->setTickPosition(QSlider::TicksBelow);
1093 _mapSpeedSlider->setTickInterval(10);
1094 int speed = settings.value("mapSpeed").toInt();
1095 if (speed == 0) speed = _mapSpeedSlider->maximum();
1096 _mapSpeedSlider->setSliderPosition(speed);
1097 ppp3LayoutHlp2->addWidget(new QLabel("Speed"));
1098 ppp3LayoutHlp2->addWidget(_mapSpeedSlider);
1099
1100 ppp3LayoutHlp2->addStretch();
1101 ppp3Layout->addLayout(ppp3LayoutHlp2);
1102
1103 ppp3Layout->addStretch();
1104 ppp3group->setLayout(ppp3Layout);
1105
1106 // Reqc Processing
1107 // ---------------
1108 _reqcActionComboBox = new QComboBox();
1109 _reqcActionComboBox->setEditable(false);
1110 _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1111 ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1112 if (ik != -1) {
1113 _reqcActionComboBox->setCurrentIndex(ik);
1114 }
1115 connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1116 this, SLOT(slotBncTextChanged()));
1117
1118 QGridLayout* reqcLayout = new QGridLayout;
1119 _reqcActionComboBox->setMinimumWidth(15*ww);
1120 _reqcActionComboBox->setMaximumWidth(15*ww);
1121
1122 _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1123 _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1124 _reqcObsFileChooser->setWhatsThis(tr("Specify the full path to an observation file in RINEX v2 or v3 format."));
1125 _reqcObsFileChooser->setMinimumWidth(15*ww);
1126 _reqcObsFileChooser->setMaximumWidth(15*ww);
1127
1128 _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1129 _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1130 _reqcNavFileChooser->setWhatsThis(tr("Specify the full path to a RINEX v2 or v3 navigation file."));
1131 _reqcNavFileChooser->setMinimumWidth(15*ww);
1132 _reqcNavFileChooser->setMaximumWidth(15*ww);
1133
1134 _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1135 _reqcOutObsLineEdit->setWhatsThis(tr("Specify the full path to a RINEX observation output file."));
1136 _reqcOutObsLineEdit->setMinimumWidth(15*ww);
1137 _reqcOutObsLineEdit->setMaximumWidth(15*ww);
1138
1139 _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1140 _reqcOutNavLineEdit->setWhatsThis(tr("Specify the full path to a RINEX navigation output file."));
1141 _reqcOutNavLineEdit->setMinimumWidth(15*ww);
1142 _reqcOutNavLineEdit->setMaximumWidth(15*ww);
1143
1144 _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1145 _reqcOutLogLineEdit->setWhatsThis(tr("Specify the full path to a logfile."));
1146 _reqcOutLogLineEdit->setMinimumWidth(15*ww);
1147 _reqcOutLogLineEdit->setMaximumWidth(15*ww);
1148
1149 _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1150 _reqcPlotDirLineEdit->setWhatsThis(tr("Specify the directory name for saving plots."));
1151 _reqcPlotDirLineEdit->setMinimumWidth(15*ww);
1152 _reqcPlotDirLineEdit->setMaximumWidth(15*ww);
1153
1154 _reqcSkyPlotSystems = new QComboBox();
1155 _reqcSkyPlotSystems->setEditable(false);
1156 _reqcSkyPlotSystems->addItems(QString("ALL,GPS,GLONASS,Galileo").split(","));
1157 ik = _reqcSkyPlotSystems->findText(settings.value("reqcSkyPlotSystems").toString());
1158 if (ik != -1) {
1159 _reqcSkyPlotSystems->setCurrentIndex(ik);
1160 }
1161
1162 ir = 0;
1163 reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check."),ir, 0, 1, 20);
1164 ++ir;
1165 reqcLayout->addWidget(new QLabel("Action"), ir, 0, Qt::AlignLeft);
1166 reqcLayout->addWidget(_reqcActionComboBox, ir, 1, Qt::AlignLeft);
1167 _reqcEditOptionButton = new QPushButton("Set Edit Options");
1168 reqcLayout->addWidget(_reqcEditOptionButton, ir, 3, Qt::AlignRight);
1169 ++ir;
1170 reqcLayout->addWidget(new QLabel("Input files (full path)"), ir, 0, Qt::AlignLeft);
1171 reqcLayout->addWidget(_reqcObsFileChooser, ir, 1, Qt::AlignRight);
1172 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1173 reqcLayout->addWidget(_reqcNavFileChooser, ir, 3, Qt::AlignRight);
1174 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1175 ++ir;
1176 reqcLayout->addWidget(new QLabel("Output files (full path)"), ir, 0, Qt::AlignLeft);
1177 reqcLayout->addWidget(_reqcOutObsLineEdit, ir, 1, Qt::AlignRight);
1178 reqcLayout->addWidget(new QLabel("Obs"), ir, 2, Qt::AlignLeft);
1179 reqcLayout->addWidget(_reqcOutNavLineEdit, ir, 3, Qt::AlignRight);
1180 reqcLayout->addWidget(new QLabel("Nav"), ir, 4, Qt::AlignLeft);
1181 ++ir;
1182 reqcLayout->addWidget(_reqcOutLogLineEdit, ir, 1, Qt::AlignRight);
1183 reqcLayout->addWidget(new QLabel("Log"), ir, 2, Qt::AlignLeft);
1184 ++ir;
1185 reqcLayout->addWidget(new QLabel("Directory for plots"), ir, 0, Qt::AlignLeft);
1186 reqcLayout->addWidget(_reqcPlotDirLineEdit, ir, 1, Qt::AlignRight);
1187 ++ir;
1188 reqcLayout->addWidget(new QLabel("Sky plots for"), ir, 0, Qt::AlignLeft);
1189 reqcLayout->addWidget(_reqcSkyPlotSystems, ir, 1, Qt::AlignRight);
1190 ++ir;
1191 reqcLayout->addWidget(new QLabel(""), ir, 1);
1192 reqcLayout->setRowStretch(ir, 999);
1193
1194 reqcLayout->setColumnMinimumWidth(2, 8*ww);
1195 reqcLayout->setColumnMinimumWidth(4, 8*ww);
1196
1197 reqcgroup->setLayout(reqcLayout);
1198
1199 connect(_reqcEditOptionButton, SIGNAL(clicked()),
1200 this, SLOT(slotReqcEditOption()));
1201
1202 // Combine Corrections
1203 // -------------------
1204 QGridLayout* cmbLayout = new QGridLayout;
1205
1206 populateCmbTable();
1207 cmbLayout->addWidget(_cmbTable, 0, 0, 6, 3);
1208 cmbLayout->addWidget(new QLabel(" "), 0, 5);
1209 cmbLayout->addWidget(new QLabel("Combine Broadcast Correction streams."), 0, 6, 1, 50);
1210 cmbLayout->addWidget(new QLabel(" "), 1, 5);
1211 cmbLayout->addWidget(addCmbRowButton, 1, 6);
1212 cmbLayout->addWidget(delCmbRowButton, 1, 7);
1213 cmbLayout->addWidget(new QLabel(" "), 2, 5);
1214 cmbLayout->addWidget(new QLabel("Method"), 2, 6, Qt::AlignRight);
1215 cmbLayout->addWidget(_cmbMethodComboBox, 2, 7, Qt::AlignRight);
1216 cmbLayout->addWidget(new QLabel(" "), 3, 5);
1217 cmbLayout->addWidget(new QLabel("Maximal Residuum"), 3, 6, Qt::AlignRight);
1218 cmbLayout->addWidget(_cmbMaxresLineEdit, 3, 7, Qt::AlignRight);
1219 cmbLayout->addWidget(new QLabel(" "), 4, 5);
1220 cmbLayout->addWidget(new QLabel("Sampling"), 4, 6, Qt::AlignRight);
1221 cmbLayout->addWidget(_cmbSamplSpinBox, 4, 7, Qt::AlignRight);
1222 cmbLayout->addWidget(new QLabel(" "), 5, 0);
1223
1224 connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1225 connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1226
1227 cmbgroup->setLayout(cmbLayout);
1228
1229 // Upload Layout (Clocks)
1230 // ----------------------
1231 QGridLayout* uploadHlpLayout = new QGridLayout();
1232
1233 connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1234 connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1235 connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1236
1237 uploadHlpLayout->addWidget(addUploadRowButton, 0, 0);
1238 uploadHlpLayout->addWidget(delUploadRowButton, 0, 1);
1239 uploadHlpLayout->addWidget(new QLabel("Interval"), 0, 2, Qt::AlignRight);
1240 uploadHlpLayout->addWidget(_uploadIntrComboBox, 0, 3);
1241 uploadHlpLayout->addWidget(new QLabel(" Sampling: Orb"), 0, 4, Qt::AlignRight);
1242 uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox, 0, 5);
1243 uploadHlpLayout->addWidget(new QLabel("SP3"), 0, 6, Qt::AlignRight);
1244 uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox, 0, 7);
1245 uploadHlpLayout->addWidget(new QLabel("RNX"), 0, 8, Qt::AlignRight);
1246 uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox, 0, 9);
1247 uploadHlpLayout->addWidget(setUploadTrafoButton, 0,10);
1248
1249 QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1250 populateUploadTable();
1251
1252 uploadLayout->addWidget(new QLabel("Upload RTCMv3 Broadcast Corrections to caster."));
1253 uploadLayout->addWidget(_uploadTable);
1254 uploadLayout->addLayout(uploadHlpLayout);
1255
1256 uploadgroup->setLayout(uploadLayout);
1257
1258 // Upload Layout (Ephemeris)
1259 // -------------------------
1260 QGridLayout* uploadLayoutEph = new QGridLayout;
1261
1262 uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1263 _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1264 _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1265 _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1266
1267 uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster."), 0, 0, 1, 50);
1268 uploadLayoutEph->addWidget(new QLabel("Host"), 1, 0);
1269 uploadLayoutEph->addWidget(_uploadEphHostLineEdit, 1, 1, 1, 3);
1270 uploadLayoutEph->addWidget(new QLabel(" Port"), 1, 4, Qt::AlignRight);
1271 uploadLayoutEph->addWidget(_uploadEphPortLineEdit, 1, 5, 1, 1);
1272 uploadLayoutEph->addWidget(new QLabel("Mountpoint "), 2, 0);
1273 uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit, 2, 1);
1274 uploadLayoutEph->addWidget(new QLabel(" Password"), 2, 2, Qt::AlignRight);
1275 uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit, 2, 3);
1276 uploadLayoutEph->addWidget(new QLabel("Sampling"), 3, 0);
1277 uploadLayoutEph->addWidget(_uploadEphSampleSpinBox, 3, 1);
1278 uploadLayoutEph->addWidget(new QLabel("Uploaded"), 4, 0);
1279 uploadLayoutEph->addWidget(_uploadEphBytesCounter, 4, 1);
1280 uploadLayoutEph->addWidget(new QLabel(" "), 5, 0);
1281 uploadLayoutEph->addWidget(new QLabel(" "), 6, 0);
1282
1283 uploadEphgroup->setLayout(uploadLayoutEph);
1284
1285 connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1286 this, SLOT(slotBncTextChanged()));
1287
1288#ifdef RTROVER_INTERFACE
1289 QWidget* rtroverGroup = new QWidget();
1290 _aogroup->addTab(rtroverGroup,tr("RTRover"));
1291 QGridLayout* rtroverLayout = new QGridLayout();
1292
1293 _rtroverModeComboBox = new QComboBox();
1294
1295 _rtroverModeComboBox->setEditable(false);
1296 _rtroverModeComboBox->addItems(QString(",PPP_DF,SPP_DF,PPP_SF,SPP_SF,PPP_AR,RTK,PPP_FTTF").split(","));
1297 ik = _rtroverModeComboBox->findText(settings.value("rtroverMode").toString());
1298 if (ik != -1) {
1299 _rtroverModeComboBox->setCurrentIndex(ik);
1300 }
1301 _rtroverModeComboBox->setMinimumWidth(10*ww);
1302
1303 _rtroverRoverMountLineEdit = new QLineEdit(settings.value("rtroverRoverMount").toString());
1304 _rtroverRoverMountLineEdit->setMaximumWidth(8*ww);
1305 _rtroverCorrMountLineEdit = new QLineEdit(settings.value("rtroverCorrMount").toString());
1306 _rtroverCorrMountLineEdit->setMaximumWidth(8*ww);
1307 _rtroverBaseMountLineEdit = new QLineEdit(settings.value("rtroverBaseMount").toString());
1308 _rtroverBaseMountLineEdit->setMaximumWidth(8*ww);
1309 _rtroverRoverRefCrdXLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdX").toString());
1310 _rtroverRoverRefCrdYLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdY").toString());
1311 _rtroverRoverRefCrdZLineEdit = new QLineEdit(settings.value("rtroverRoverRefCrdZ").toString());
1312 _rtroverBaseRefCrdXLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdX").toString());
1313 _rtroverBaseRefCrdYLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdY").toString());
1314 _rtroverBaseCrdZLineEdit = new QLineEdit(settings.value("rtroverBaseRefCrdZ").toString());
1315 _rtroverRoverDNLineEdit = new QLineEdit(settings.value("rtroverRoverDN").toString());
1316 _rtroverRoverDNLineEdit->setMaximumWidth(6*ww);
1317 _rtroverRoverDELineEdit = new QLineEdit(settings.value("rtroverRoverDE").toString());
1318 _rtroverRoverDELineEdit->setMaximumWidth(6*ww);
1319 _rtroverRoverDULineEdit = new QLineEdit(settings.value("rtroverRoverDU").toString());
1320 _rtroverRoverDULineEdit->setMaximumWidth(6*ww);
1321 _rtroverBaseDNLineEdit = new QLineEdit(settings.value("rtroverBaseDN").toString());
1322 _rtroverBaseDNLineEdit->setMaximumWidth(6*ww);
1323 _rtroverBaseDELineEdit = new QLineEdit(settings.value("rtroverBaseDE").toString());
1324 _rtroverBaseDELineEdit->setMaximumWidth(6*ww);
1325 _rtroverBaseDULineEdit = new QLineEdit(settings.value("rtroverBaseDU").toString());
1326 _rtroverBaseDULineEdit->setMaximumWidth(6*ww);
1327 _rtroverRoverAntennaLineEdit = new QLineEdit(settings.value("rtroverRoverAntenna").toString());
1328 _rtroverBaseAntennaLineEdit = new QLineEdit(settings.value("rtroverBaseAntenna").toString());
1329 _rtroverAntexFileChooser = new qtFileChooser;
1330 _rtroverAntexFileChooser->setMinimumWidth(12*ww);
1331 _rtroverAntexFileChooser->setFileName(settings.value("rtroverAntex").toString());
1332 _rtroverOutputLineEdit = new QLineEdit(settings.value("rtroverOutput").toString());
1333 _rtroverOutputLineEdit->setMinimumWidth(15*ww);
1334
1335 ir = 0;
1336 rtroverLayout->addWidget(new QLabel("Real-Time Rover"), ir, 0, 1, 2, Qt::AlignLeft);
1337 ++ir;
1338 rtroverLayout->addWidget(new QLabel("Mode & mountpoints"),ir, 0, Qt::AlignLeft);
1339 rtroverLayout->addWidget(_rtroverModeComboBox, ir, 1, Qt::AlignRight);
1340 rtroverLayout->addWidget(_rtroverRoverMountLineEdit, ir, 3, Qt::AlignRight);
1341 rtroverLayout->addWidget(new QLabel("Rover"), ir, 4, Qt::AlignLeft);
1342 rtroverLayout->addWidget(_rtroverCorrMountLineEdit, ir, 5, Qt::AlignRight);
1343 rtroverLayout->addWidget(new QLabel("Corr."), ir, 6, Qt::AlignLeft);
1344 rtroverLayout->addWidget(_rtroverBaseMountLineEdit, ir, 7, Qt::AlignRight);
1345 rtroverLayout->addWidget(new QLabel("Base"), ir, 8, Qt::AlignLeft);
1346 ++ir;
1347 rtroverLayout->addWidget(new QLabel("Rover coordinates"), ir, 0, Qt::AlignLeft);
1348 rtroverLayout->addWidget(_rtroverRoverRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1349 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1350 rtroverLayout->addWidget(_rtroverRoverRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1351 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1352 rtroverLayout->addWidget(_rtroverRoverRefCrdZLineEdit, ir, 5, Qt::AlignRight);
1353 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1354 ++ir;
1355 rtroverLayout->addWidget(_rtroverRoverDNLineEdit, ir, 1, Qt::AlignRight);
1356 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1357 rtroverLayout->addWidget(_rtroverRoverDELineEdit, ir, 3, Qt::AlignRight);
1358 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1359 rtroverLayout->addWidget(_rtroverRoverDULineEdit, ir, 5, Qt::AlignRight);
1360 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1361 ++ir;
1362 rtroverLayout->addWidget(new QLabel("Base coordinates"), ir, 0, Qt::AlignLeft);
1363 rtroverLayout->addWidget(_rtroverBaseRefCrdXLineEdit, ir, 1, Qt::AlignRight);
1364 rtroverLayout->addWidget(new QLabel("X "), ir, 2, Qt::AlignLeft);
1365 rtroverLayout->addWidget(_rtroverBaseRefCrdYLineEdit, ir, 3, Qt::AlignRight);
1366 rtroverLayout->addWidget(new QLabel("Y"), ir, 4, Qt::AlignLeft);
1367 rtroverLayout->addWidget(_rtroverBaseCrdZLineEdit, ir, 5, Qt::AlignRight);
1368 rtroverLayout->addWidget(new QLabel("Z"), ir, 6, Qt::AlignLeft);
1369 ++ir;
1370 rtroverLayout->addWidget(_rtroverBaseDNLineEdit, ir, 1, Qt::AlignRight);
1371 rtroverLayout->addWidget(new QLabel("dN"), ir, 2, Qt::AlignLeft);
1372 rtroverLayout->addWidget(_rtroverBaseDELineEdit, ir, 3, Qt::AlignRight);
1373 rtroverLayout->addWidget(new QLabel("dE"), ir, 4, Qt::AlignLeft);
1374 rtroverLayout->addWidget(_rtroverBaseDULineEdit, ir, 5, Qt::AlignRight);
1375 rtroverLayout->addWidget(new QLabel("dU"), ir, 6, Qt::AlignLeft);
1376 ++ir;
1377 rtroverLayout->addWidget(new QLabel("ANTEX"), ir, 0, Qt::AlignLeft);
1378 rtroverLayout->addWidget(_rtroverAntexFileChooser, ir, 1, Qt::AlignRight);
1379 rtroverLayout->addWidget(new QLabel("file"), ir, 2, Qt::AlignLeft);
1380 rtroverLayout->addWidget(_rtroverBaseAntennaLineEdit, ir, 3, Qt::AlignRight);
1381 rtroverLayout->addWidget(new QLabel("Ant. Rover"), ir, 4, Qt::AlignLeft);
1382 rtroverLayout->addWidget(_rtroverRoverAntennaLineEdit, ir, 5, Qt::AlignRight);
1383 rtroverLayout->addWidget(new QLabel("Ant. Base"), ir, 6, Qt::AlignLeft);
1384 ++ir;
1385 rtroverLayout->addWidget(new QLabel("Output"), ir, 0, Qt::AlignLeft);
1386 rtroverLayout->addWidget(_rtroverOutputLineEdit, ir, 1, Qt::AlignRight);
1387
1388 rtroverGroup->setLayout(rtroverLayout);
1389#endif
1390
1391 // Main Layout
1392 // -----------
1393 QGridLayout* mLayout = new QGridLayout;
1394 _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1395 mLayout->addWidget(_aogroup, 0,0);
1396 mLayout->addWidget(_mountPointsTable, 1,0);
1397 _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1398 mLayout->addWidget(_loggroup, 2,0);
1399
1400 _canvas->setLayout(mLayout);
1401
1402 // WhatsThis
1403 // ---------
1404 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1405 _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1406 _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an NTRIP broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved NTRIP broadcaster. Note that SSL communication is usually done over port 443.</p>"));
1407 _ignoreSslErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the NTRIP broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1408 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or products.</p>"));
1409 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
1410 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1411 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in a plain ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1412 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
1413 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
1414 _corrTimeSpinBox->setWhatsThis(tr("<p>Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full corr epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application.</p><p>Specifying a value of '0' means that BNC immediately outputs all incoming Broadcast Epemeris Corrections and does not drop any of them for latency reasons.</p>"));
1415 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
1416 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
1417 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
1418 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p>"));
1419 _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1420 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1421 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1422 _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p>"));
1423
1424 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Reread Configuration'.</p>"));
1425 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1426 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1427 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
1428 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
1429 _binSamplSpinBox->setWhatsThis(tr("<p>Select the synchronized observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1430 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p>"));
1431 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1432 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1433 _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date."));
1434 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1435 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1436 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the sourcetable. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate these streams, the approximate latitude/longitude rover position is sent to the NTRIP broadcaster. The default values can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1437 _log->setWhatsThis(tr("Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
1438 _bncFigure->setWhatsThis(tr("The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps)."));
1439 _bncFigureLate->setWhatsThis(tr("The individual latency of observations in each incoming stream is shown in the 'Latency' tab. Streams not carrying observations (i.e. those providing only broadcast ephemeris messages) are not considered here. Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized."));
1440 _ephV3CheckBox->setWhatsThis(tr("The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2. Select 'Version 3' if you want to output the ephemeris in RINEX Version 3 format."));
1441 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
1442 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1443 _miscPortLineEdit->setWhatsThis(tr("BNC can output an incoming stream through a TCP/IP port of your local host. Specify a port number here to activate this function."));
1444 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1445 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p>"));
1446 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that you must plug a serial cable in the port defined here before you start BNC.</p>"));
1447 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Note further that using a high baud rate is recommended.</p>"));
1448 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. Note further that parity is often set to 'NONE'.</p>"));
1449 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1450 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1451 _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1452 _serialAutoNMEAComboBox->setWhatsThis(tr("<p>Select 'Auto' to automatically forward NMEA-GGA messages coming from your serial connected receiver to the NTRIP broadcaster and/or save them in a file.</p><p>Select 'Manual' only when handling a VRS stream and your serial connected receiver doesn't generate NMEA-GGA messages.</p>"));
1453 _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
1454 _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
1455 _pppMountLineEdit->setWhatsThis(tr("<p>Specify an observations stream by its mountpoint from the 'Streams' list compiled below if you want BNC to estimate coordinates for the affected receiver position through a PPP solution. Example: 'FFMJ1'</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris referring to the satellites' Antenna Phase Centers (APC). Stream CLK11 on NTRIP broadcaster products.igs-ip.net is an example.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver in low repetition rate or don't come at all from there.</p>"));
1456 _pppCorrMountLineEdit->setWhatsThis(tr("<p>You must specify an orbit/clock Broadcast Ephemeris corrections stream by its mountpoint from the 'Streams' list below. Example: 'CLK10'. Corrections must refer to satellite Antenna Phase Centers (APC).</p><p>Note that BNC can produce an internal PPP solution from combined Broadcast Ephemeris corrections as specified under 'Combine Corrections' if you introduce keyword 'INTERNAL' as the corrections mountpoint.</p>"));
1457 _pppSPPComboBox->setWhatsThis(tr("<p>Choose between plain Single Point Positioning (SPP) and Precise Point Positioning (PPP) in 'Realtime' or 'Post-Processing' mode.</p><p>When in 'Post-Processing mode:<ul><li>Specifying a RINEX Observation, a RINEX Navigation and a Broadcast Correction file leads to a PPP solution.</li><li>Specifying only a RINEX Observation and a RINEX Navigation file and no Broadcast Correction file leads to a SPP solution.</ul></p>"));
1458 _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to edit or concatenate RINEX v2 or v3 files or to perform a quality check following UNAVCO's famous 'teqc' program.</p>"));
1459 _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX v2 or v3 files.</p>"));
1460 _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
1461 _pppEstTropoCheckBox->setWhatsThis(tr("<p>By default BNC does not introduce troposphere parameters when estimating coordinates.</p><p>Tick 'Estimate tropo' to introduce troposphere parameters when estimating coordinates.</p>"));
1462 _pppGLONASSCheckBox->setWhatsThis(tr("<p>By default BNC does not use GLONASS observations in PPP mode.</p><p>Tick 'Use GLONASS' for adding GLONASS observations to GPS and Galileo (optional) in a PPP solution.</p>"));
1463 _pppGalileoCheckBox->setWhatsThis(tr("<p>By default BNC does not use Galileo observations in PPP mode.</p><p>Tick 'Use Galileo' for adding Galileo observations to GPS and GLONASS (optional) in a PPP solution.</p>"));
1464 _pppPlotCoordinates->setWhatsThis(tr("<p>BNC will plot PPP results in the 'PPP Plot' tab as North (red), East (green) and Up (blue) displacements when this option is selected. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes.</p><p>Note that a PPP time series makes only sense for a stationary operated receiver."));
1465 _mapWinButton->setWhatsThis(tr("<p>You make like to track your rover position using Google Maps or Open Street Map as a background map. Track plots can be produced with BNC in 'Realtime-PPP', 'Realtime-SPP' and 'Post-Processing' mode.</p><p>The 'Open Map' button opens a windows showing a map according to specified options.</p><p>When in 'Post-Processing' mode you should not forget to specify a proxy under the 'Network' tab if that is operated in front of BNC."));
1466 _gmRadioButton->setWhatsThis(tr("<p>Specify Google Maps as the background for your rover positions."));
1467 _osmRadioButton->setWhatsThis(tr("<p>Specify Open Street Map as the background for your rover positions."));
1468 _mapWinDotSizeLineEdit->setWhatsThis(tr("<p>Specify the size of dots showing the rover positions.</p><p>A dot size of '3' may be appropriate. The maximum possible dot size is '10'. An empty option field or a size of '0' would mean that you don't want BNC to show the rover's track on the map.</p>"));
1469 _mapWinDotColorComboBox->setWhatsThis(tr("<p>Specify the color of dots showing the rover track.</p>"));
1470 _mapSpeedSlider->setWhatsThis(tr("<p>With BNC in PPP post-processing mode you can specify the speed of computations as appropriate for visualization. Note that you can adjust 'Speed' on-the-fly while BNC is already processing your observations."));
1471 _pppNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where PPP results are saved as NMEA messages.</p>"));
1472 _pppNMEAPortLineEdit->setWhatsThis(tr("<p>Specify an IP port number to output PPP results as NMEA messages through an IP port.</p>"));
1473 _pppSigCLineEdit->setWhatsThis(tr("<p>Enter a sigma for your code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of code observations to a PPP solution based on a combination of code and phase data. 5.0 (default) is likely to be an appropriate choice.</p>"));
1474 _pppQuickStartLineEdit->setWhatsThis(tr("<p>Enter the lenght of a startup period in seconds for which you want to fix the PPP solution to a known XYZ coordinate as introduced above and adjust a sigma 'XYZ Ini' according to the coordinate's precision. Fixing the coordinate is done in BNC through setting the 'Sigma XYZ Noise' you define below temporarily to zero.</p><p>This so-called Quick-Start option allows the PPP solution to rapidly converge. It requires that the antenna remains unmoved on the know position throughout the startup period.</p><p>A value of 120 is likely to be an appropriate choice for 'Quick-Start'. Default is an empty option field, meaning that you don't want BNC to operate in Quick-Start mode.</p>"));
1475 _pppMaxSolGapLineEdit->setWhatsThis(tr("<p>Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive solutions exceed this limit, the algorithm returns into Quick-Start mode and fixes the introduced reference coordinate for the specified period. A value of '60' seconds could be an appropriate choice.</p><p>This option makes only sense for a stationary operated receiver where solution convergence can be enforced because a good approximation for the rover position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages.</p>"));
1476 _pppAudioResponseLineEdit->setWhatsThis(tr("<p>Specify an 'Audio response' threshold in meters. A beep is produced by BNC whenever a horizontal PPP coordinate component differs by more than the threshold value from the marker coordinate.</p><p>Default is an empty option field, meaning that you don't want BNC to produce alarm signals.</p>"));
1477 _pppSigPLineEdit->setWhatsThis(tr("<p>Enter a sigma for your phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of phase observations to a PPP solutions based on a combination of code and phase data. 0.02 (default) is likely to be an appropriate choice.</p>"));
1478 _pppAverageLineEdit->setWhatsThis(tr("<p>Enter the length of a sliding time window in minutes. BNC will continuously output moving average positions computed from those individual positions obtained most recently throughout this period.</p><p>An empty option field (default) means that you don't want BNC to output moving average positions.</p>"));
1479 _pppSigCrd0->setWhatsThis(tr("<p>Enter a sigma in meters for the initial XYZ coordinate componentes. A value of 100.0 (default) may be an appropriate choice. However, this value may be significantly smaller (i.e. 0.01) when starting for example from a station with known XZY position in Quick-Start mode."));
1480 _pppSigCrdP->setWhatsThis(tr("<p>Enter a sigma in meters for the white noise of estimated XYZ coordinate components. A value of 100.0 (default) may be appropriate considering the potential movement of a rover position.</p>"));
1481 _pppSigTrp0->setWhatsThis(tr("<p>Enter a sigma in meters for the a-priory model based tropospheric delay estimation. A value of 0.1 (default) may be an appropriate choice.</p>"));
1482 _pppSigTrpP->setWhatsThis(tr("<p>Enter a sigma in meters per second to describe the expected variation of the tropospheric effect.</p><p>Supposing 1Hz observation data, a value of 3e-6 (default) would mean that the tropospheric effect may vary for 3600 * 3e-6 = 0.01 meters per hour.</p>"));
1483 _pppRefCrdXLineEdit->setWhatsThis(tr("<p>Enter reference coordinate X of the receiver's position.</p><p>This option only makes sense in static observation conditions.</p>"));
1484 _pppRefCrdYLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Y of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1485 _pppRefCrdZLineEdit->setWhatsThis(tr("<p>Enter reference coordinate Z of the receiver's position.</p><p>This option only makes sens in static observation conditions.</p>"));
1486 _pppRefdNLineEdit->setWhatsThis(tr("<p>Enter north antenna excentricity.</p>"));
1487 _pppRefdELineEdit->setWhatsThis(tr("<p>Enter east antenna excentricity.</p>"));
1488 _pppRefdULineEdit->setWhatsThis(tr("<p>Enter up antenna excentricity.</p>"));
1489 _bncFigurePPP->setWhatsThis(tr("PPP time series of North (red), East (green) and Up (blue) coordinate components are shown in the 'PPP Plot' tab when the corresponting option is selected above. Values are either referred to an XYZ reference coordinate (if specified) or referred to the first estimated set of coordinate compoments. The sliding PPP time series window covers the period of the latest 5 minutes."));
1490 _pppSync->setWhatsThis(tr(
1491 "<p> Zero value (or empty field, default) means that BNC processes each epoch of data "
1492 "immediately after its arrival using satellite clock corrections available at "
1493 "that time.</p><p> Non-zero value 'Sync Corr' (i.e. 5) means that the epochs of data "
1494 "are buffered and the processing of each epoch is postponed till the satellite clock "
1495 "corrections not older than 'Sync Corr' seconds are available.<p>"));
1496 _pppAntexFileChooser->setWhatsThis(tr("<p>IGS provides a file containing absolute phase center corrections for GNSS satellite and receiver antennas in ANTEX format. Entering the full path to such an ANTEX file is required for correcting observations for antenna phase center offsets and variations. It allows you to specify the name of your receiver's antenna (as contained in the ANTEX file) to apply such corrections.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets and variations.</p>"));
1497 _pppAntennaLineEdit->setWhatsThis(tr("<p>Specify the receiver's antenna name as defined in your ANTEX file. Observations will be corrected for the antenna phase center's offset which may result in a reduction of a few centimeters at max. Corrections for phase center variations are not yet applied by BNC. The specified name must consist of 20 characters. Add trailing blanks if the antenna name has less then 20 characters.</p><p>Default is an empty option field meaning that you don't want to correct observations for antenna phase center offsets.</p>"));
1498 _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock corrections streams in real-time to produce, encode, upload and save a combination of correctors coming from various providers. Hit the 'Add Row' button, double click on the 'Mountpoint' field to enter a Broadcast Ephemeris corrections mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter the weight to be applied for this stream in the combination.<ul><li>Note that an appropriate 'Wait for full corr epoch' value needs to be specified for the combination under the 'Broadcast Corrections' tab. A value of 15 seconds would make sense there if the update rate of incoming clock corrections is i.e. 10 seconds.</li><li>Note also that you need to tick 'Use GLONASS' which is part ot the 'PPP (2)' panel in case you want to produce an GPS plus GLONASS combination.</li></ul></p><p>Note further that the orbit information in the final combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides the orbit and clock corrections stream(s) BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris corrections stream in the combination table. Instead of combining corrections BNC will then merge them with Broadcast Ephemeris to save results in SP3 and/or Clock RINEX format."));
1499 _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal Residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1500 _cmbSamplSpinBox->setWhatsThis(tr("<p>Specify a combination sampling interval. Clock and orbit corrections will be produced following that interval. A value of 10 sec may be an appropriate choice.</p>"));
1501 _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'. It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1502 _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to broadcast ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified NTRIP broadcaster</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris corrections if you specify correction streams in the 'Combine Corrections' stream table.</p><p>Hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an NTRIP broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the NTRIP broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference system (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving the generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create SP3 orbit files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><ul><li>As an SP3 file contents should be referred to the satellites Center of Mass (CoM) while correctors are referred to the satellites Antenna Phase Center (APC), an offset has to be applied which is available from an IGS ANTEX file. You should therefore specify the 'ANTEX File' path under tab 'PPP (2)' if you want to save the stream contents in SP3 format. If you don't specify an 'ANTEX File' path there, the SP3 file contents will be referred to the satellites APCs.</li></ul></p><p>Specify a path for saving the generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system:<br>/home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the file name.</p><p>Specify finally an SSR Provider ID number, an SSR Solution ID number and an Issue of Data SSR number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Corrections stream, BNC will merge that stream with Broadcast Ephemeris to save results in files specified here through SP3 and/or Clock RINEX file path. In such a case you should define only the SP3 and Clock RINEX file path and no further options in the 'Upload Corrections' table.</p>"));
1503 _postObsFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Observation file."));
1504 _postNavFileChooser->setWhatsThis(tr("Full path to RINEX v2/v3 Navigation file."));
1505 _postCorrFileChooser->setWhatsThis(tr("Full path to Broadcast Corrections file as previously saved with BNC in plain ASCII format."));
1506 _postOutLineEdit->setWhatsThis(tr("Full path to file with post processing PPP results. "));
1507 addCmbRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the mountpoints table."));
1508 delCmbRowButton->setWhatsThis(tr("Hit 'Delete' button to delete the highlighted line from the mountpoints table."));
1509 addUploadRowButton->setWhatsThis(tr("Hit 'Add Row' button to add another line to the stream upload table."));
1510 delUploadRowButton->setWhatsThis(tr("Hit 'Del Row' button to delete the highlighted line from the stream upload table."));
1511 _uploadIntrComboBox->setWhatsThis(tr("Select the length of the SP3 and Clock RINEX files."));
1512 _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("Select the stream's orbit correction sampling interval in seconds. A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages."));
1513 _uploadSamplClkRnxSpinBox->setWhatsThis(tr("Select the Clock RINEX file sampling interval in seconds. A value of zero '0' tells BNC to store all available samples into Clock RINEX files."));
1514 _uploadSamplSp3SpinBox->setWhatsThis(tr("Select the SP3 orbit file sampling interval in minutes. A value of zero '0' tells BNC to store all available samples into SP3 orbit files."));
1515 setUploadTrafoButton->setWhatsThis(tr("Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation through 'System' button."));
1516
1517 _uploadEphHostLineEdit->setWhatsThis(tr("BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the host IP of an NTRIP Broadcaster to upload the stream. An empty option field means that you don't want to upload Broadcast Ephemeris."));
1518 _uploadEphPortLineEdit->setWhatsThis(tr("Specify the IP port of an NTRIP Broadcaster to upload the stream. Default is port 80."));
1519 _uploadEphMountpointLineEdit->setWhatsThis(tr("Specify the mounpoint for stream upload to an NTRIP Broadcaster."));
1520 _uploadEphPasswordLineEdit->setWhatsThis(tr("Specify the stream upload password protecting the mounpoint on an NTRIP Broadcaster."));
1521 _uploadEphSampleSpinBox->setWhatsThis(tr("Select the Broadcast Ephemeris sampling interval in seconds. Defaut is '5' meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds."));
1522 _uploadEphBytesCounter->setWhatsThis(tr("BNC shows the amount of data uploaded through this stream."));
1523
1524 _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1525 _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1526 _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use the mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1527
1528 _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1529 _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1530// Weber
1531
1532 // Enable/Disable all Widgets
1533 // --------------------------
1534 slotBncTextChanged();
1535 enableStartStop();
1536
1537 // Auto start
1538 // ----------
1539 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1540 slotStart();
1541 }
1542}
1543
1544// Destructor
1545////////////////////////////////////////////////////////////////////////////
1546bncWindow::~bncWindow() {
1547 delete _caster;
1548 delete _casterEph;
1549}
1550
1551//
1552////////////////////////////////////////////////////////////////////////////
1553void bncWindow::populateMountPointsTable() {
1554
1555 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1556 _mountPointsTable->removeRow(iRow);
1557 }
1558
1559 bncSettings settings;
1560
1561 QListIterator<QString> it(settings.value("mountPoints").toStringList());
1562 int iRow = 0;
1563 while (it.hasNext()) {
1564 QStringList hlp = it.next().split(" ");
1565 if (hlp.size() < 5) continue;
1566 _mountPointsTable->insertRow(iRow);
1567
1568 QUrl url(hlp[0]);
1569
1570 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1571 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1572 QString nmea(hlp[4]);
1573 if (hlp[5] == "S") {
1574 fullPath = hlp[0].replace(0,2,"");
1575 }
1576 QString ntripVersion = "2";
1577 if (hlp.size() >= 6) {
1578 ntripVersion = (hlp[5]);
1579 }
1580
1581 QTableWidgetItem* it;
1582 it = new QTableWidgetItem(url.userInfo());
1583 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1584 _mountPointsTable->setItem(iRow, 0, it);
1585
1586 it = new QTableWidgetItem(fullPath);
1587 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1588 _mountPointsTable->setItem(iRow, 1, it);
1589
1590 it = new QTableWidgetItem(format);
1591 _mountPointsTable->setItem(iRow, 2, it);
1592
1593 if (nmea == "yes") {
1594 it = new QTableWidgetItem(latitude);
1595 _mountPointsTable->setItem(iRow, 3, it);
1596 it = new QTableWidgetItem(longitude);
1597 _mountPointsTable->setItem(iRow, 4, it);
1598 } else {
1599 it = new QTableWidgetItem(latitude);
1600 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1601 _mountPointsTable->setItem(iRow, 3, it);
1602 it = new QTableWidgetItem(longitude);
1603 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1604 _mountPointsTable->setItem(iRow, 4, it);
1605 }
1606
1607 it = new QTableWidgetItem(nmea);
1608 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1609 _mountPointsTable->setItem(iRow, 5, it);
1610
1611 it = new QTableWidgetItem(ntripVersion);
1612 //// it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1613 _mountPointsTable->setItem(iRow, 6, it);
1614
1615 bncTableItem* bncIt = new bncTableItem();
1616 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1617 _mountPointsTable->setItem(iRow, 7, bncIt);
1618
1619 iRow++;
1620 }
1621
1622 _mountPointsTable->sortItems(1);
1623
1624 enableStartStop();
1625}
1626
1627// Retrieve Table
1628////////////////////////////////////////////////////////////////////////////
1629void bncWindow::slotAddMountPoints() {
1630
1631 bncSettings settings;
1632 QString proxyHost = settings.value("proxyHost").toString();
1633 int proxyPort = settings.value("proxyPort").toInt();
1634 if (proxyHost != _proxyHostLineEdit->text() ||
1635 proxyPort != _proxyPortLineEdit->text().toInt()) {
1636 int iRet = QMessageBox::question(this, "Question", "Proxy options "
1637 "changed. Use the new ones?",
1638 QMessageBox::Yes, QMessageBox::No,
1639 QMessageBox::NoButton);
1640 if (iRet == QMessageBox::Yes) {
1641 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1642 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1643 }
1644 }
1645
1646 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1647 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1648
1649 QMessageBox msgBox;
1650 msgBox.setIcon(QMessageBox::Question);
1651 msgBox.setWindowTitle("Add Stream");
1652 msgBox.setText("Add stream(s) coming from:");
1653
1654 QPushButton* buttonNtrip = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1655 QPushButton* buttonIP = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1656 QPushButton* buttonUDP = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1657 QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1658 QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1659
1660 msgBox.exec();
1661
1662 if (msgBox.clickedButton() == buttonNtrip) {
1663 bncTableDlg* dlg = new bncTableDlg(this);
1664 dlg->move(this->pos().x()+50, this->pos().y()+50);
1665 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1666 this, SLOT(slotNewMountPoints(QStringList*)));
1667 dlg->exec();
1668 delete dlg;
1669 } else if (msgBox.clickedButton() == buttonIP) {
1670 bncIpPort* ipp = new bncIpPort(this);
1671 connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1672 this, SLOT(slotNewMountPoints(QStringList*)));
1673 ipp->exec();
1674 delete ipp;
1675 } else if (msgBox.clickedButton() == buttonUDP) {
1676 bncUdpPort* udp = new bncUdpPort(this);
1677 connect(udp, SIGNAL(newMountPoints(QStringList*)),
1678 this, SLOT(slotNewMountPoints(QStringList*)));
1679 udp->exec();
1680 delete udp;
1681 } else if (msgBox.clickedButton() == buttonSerial) {
1682 bncSerialPort* sep = new bncSerialPort(this);
1683 connect(sep, SIGNAL(newMountPoints(QStringList*)),
1684 this, SLOT(slotNewMountPoints(QStringList*)));
1685 sep->exec();
1686 delete sep;
1687 } else if (msgBox.clickedButton() == buttonCancel) {
1688 // Cancel
1689 }
1690
1691 enableStartStop();
1692}
1693
1694// Delete Selected Mount Points
1695////////////////////////////////////////////////////////////////////////////
1696void bncWindow::slotDeleteMountPoints() {
1697
1698 int nRows = _mountPointsTable->rowCount();
1699 bool flg[nRows];
1700 for (int iRow = 0; iRow < nRows; iRow++) {
1701 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1702 flg[iRow] = true;
1703 }
1704 else {
1705 flg[iRow] = false;
1706 }
1707 }
1708 for (int iRow = nRows-1; iRow >= 0; iRow--) {
1709 if (flg[iRow]) {
1710 _mountPointsTable->removeRow(iRow);
1711 }
1712 }
1713 _actDeleteMountPoints->setEnabled(false);
1714
1715 enableStartStop();
1716}
1717
1718// New Mount Points Selected
1719////////////////////////////////////////////////////////////////////////////
1720void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1721 int iRow = 0;
1722 QListIterator<QString> it(*mountPoints);
1723 while (it.hasNext()) {
1724 QStringList hlp = it.next().split(" ");
1725 QUrl url(hlp[0]);
1726 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1727 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
1728 QString nmea(hlp[4]);
1729 if (hlp[5] == "S") {
1730 fullPath = hlp[0].replace(0,2,"");
1731 }
1732 QString ntripVersion = "2";
1733 if (hlp.size() >= 6) {
1734 ntripVersion = (hlp[5]);
1735 }
1736
1737 _mountPointsTable->insertRow(iRow);
1738
1739 QTableWidgetItem* it;
1740 it = new QTableWidgetItem(url.userInfo());
1741 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1742 _mountPointsTable->setItem(iRow, 0, it);
1743
1744 it = new QTableWidgetItem(fullPath);
1745 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1746 _mountPointsTable->setItem(iRow, 1, it);
1747
1748 it = new QTableWidgetItem(format);
1749 _mountPointsTable->setItem(iRow, 2, it);
1750
1751 if (nmea == "yes") {
1752 it = new QTableWidgetItem(latitude);
1753 _mountPointsTable->setItem(iRow, 3, it);
1754 it = new QTableWidgetItem(longitude);
1755 _mountPointsTable->setItem(iRow, 4, it);
1756 } else {
1757 it = new QTableWidgetItem(latitude);
1758 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1759 _mountPointsTable->setItem(iRow, 3, it);
1760 it = new QTableWidgetItem(longitude);
1761 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1762 _mountPointsTable->setItem(iRow, 4, it);
1763 }
1764
1765 it = new QTableWidgetItem(nmea);
1766 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1767 _mountPointsTable->setItem(iRow, 5, it);
1768
1769 it = new QTableWidgetItem(ntripVersion);
1770 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1771 _mountPointsTable->setItem(iRow, 6, it);
1772
1773 bncTableItem* bncIt = new bncTableItem();
1774 _mountPointsTable->setItem(iRow, 7, bncIt);
1775
1776 iRow++;
1777 }
1778 _mountPointsTable->hideColumn(0);
1779 _mountPointsTable->sortItems(1);
1780 delete mountPoints;
1781
1782 enableStartStop();
1783}
1784
1785// Save Options (serialize)
1786////////////////////////////////////////////////////////////////////////////
1787void bncWindow::slotSaveOptions() {
1788 saveOptions();
1789 bncSettings settings;
1790 settings.sync();
1791}
1792
1793// Save Options (memory only)
1794////////////////////////////////////////////////////////////////////////////
1795void bncWindow::saveOptions() {
1796
1797 QStringList mountPoints;
1798 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1799
1800 if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1801 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1802 "@" + _mountPointsTable->item(iRow, 1)->text() );
1803
1804 mountPoints.append(url.toString() + " " +
1805 _mountPointsTable->item(iRow, 2)->text()
1806 + " " + _mountPointsTable->item(iRow, 3)->text()
1807 + " " + _mountPointsTable->item(iRow, 4)->text()
1808 + " " + _mountPointsTable->item(iRow, 5)->text()
1809 + " " + _mountPointsTable->item(iRow, 6)->text());
1810 } else {
1811 mountPoints.append(
1812 "//" + _mountPointsTable->item(iRow, 1)->text()
1813 + " " + _mountPointsTable->item(iRow, 2)->text()
1814 + " " + _mountPointsTable->item(iRow, 3)->text()
1815 + " " + _mountPointsTable->item(iRow, 4)->text()
1816 + " " + _mountPointsTable->item(iRow, 5)->text()
1817 + " " + _mountPointsTable->item(iRow, 6)->text());
1818 }
1819 }
1820
1821 QStringList combineStreams;
1822 for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1823 QString hlp;
1824 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1825 if (_cmbTable->item(iRow, iCol)) {
1826 hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1827 }
1828 }
1829 if (!hlp.isEmpty()) {
1830 combineStreams << hlp;
1831 }
1832 }
1833
1834 QStringList uploadMountpointsOut;
1835 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1836 QString hlp;
1837 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1838 if (_uploadTable->cellWidget(iRow, iCol) &&
1839 (iCol == 3 || iCol == 4 || iCol == 5)) {
1840 if (iCol == 3) {
1841 QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1842 hlp += passwd->text() + ",";
1843 }
1844 else if (iCol == 4) {
1845 QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1846 hlp += system->currentText() + ",";
1847 }
1848 else if (iCol == 5) {
1849 QCheckBox* com = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1850 QString state; state.setNum(com->checkState());
1851 hlp += state + ",";
1852 }
1853 }
1854 else if (_uploadTable->item(iRow, iCol)) {
1855 hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1856 }
1857 }
1858 if (!hlp.isEmpty()) {
1859 uploadMountpointsOut << hlp;
1860 }
1861 }
1862
1863 bncSettings settings;
1864
1865 settings.setValue("startTab", _aogroup->currentIndex());
1866 settings.setValue("statusTab", _loggroup->currentIndex());
1867 settings.setValue("mountPoints", mountPoints);
1868// Network
1869 settings.setValue("proxyHost", _proxyHostLineEdit->text());
1870 settings.setValue("proxyPort", _proxyPortLineEdit->text());
1871 settings.setValue("sslCaCertPath", _sslCaCertPathLineEdit->text());
1872 settings.setValue("ignoreSslErrors", _ignoreSslErrorsCheckBox->checkState());
1873// General
1874 settings.setValue("logFile", _logFileLineEdit->text());
1875 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
1876 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1877 settings.setValue("autoStart", _autoStartCheckBox->checkState());
1878 settings.setValue("rawOutFile", _rawOutFileLineEdit->text());
1879// RINEX Observations
1880 settings.setValue("rnxPath", _rnxPathLineEdit->text());
1881 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
1882 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
1883 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
1884 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
1885 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
1886// RINEX Ephemeris
1887 settings.setValue("ephPath", _ephPathLineEdit->text());
1888 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
1889 settings.setValue("outEphPort", _outEphPortLineEdit->text());
1890 settings.setValue("ephV3", _ephV3CheckBox->checkState());
1891// Broadcast Corrections
1892 settings.setValue("corrPath", _corrPathLineEdit->text());
1893 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
1894 settings.setValue("corrPort", _corrPortLineEdit->text());
1895 settings.setValue("corrTime", _corrTimeSpinBox->value());
1896// Feed Engine
1897 settings.setValue("outPort", _outPortLineEdit->text());
1898 settings.setValue("waitTime", _waitTimeSpinBox->value());
1899 settings.setValue("binSampl", _binSamplSpinBox->value());
1900 settings.setValue("outFile", _outFileLineEdit->text());
1901 settings.setValue("outUPort", _outUPortLineEdit->text());
1902// Serial Output
1903 settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1904 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
1905 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
1906 settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1907 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
1908 settings.setValue("serialParity", _serialParityComboBox->currentText());
1909 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
1910 settings.setValue("serialAutoNMEA", _serialAutoNMEAComboBox->currentText());
1911 settings.setValue("serialFileNMEA",_serialFileNMEALineEdit->text());
1912 settings.setValue("serialHeightNMEA",_serialHeightNMEALineEdit->text());
1913// Outages
1914 settings.setValue("obsRate", _obsRateComboBox->currentText());
1915 settings.setValue("adviseFail", _adviseFailSpinBox->value());
1916 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
1917 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
1918// Miscellaneous
1919 settings.setValue("miscMount", _miscMountLineEdit->text());
1920 settings.setValue("miscPort", _miscPortLineEdit->text());
1921 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
1922 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
1923// PPPP
1924 settings.setValue("pppSPP", _pppSPPComboBox->currentText());
1925 settings.setValue("pppMount", _pppMountLineEdit->text());
1926 settings.setValue("pppCorrMount",_pppCorrMountLineEdit->text());
1927 settings.setValue("pppRefCrdX", _pppRefCrdXLineEdit->text());
1928 settings.setValue("pppRefCrdY", _pppRefCrdYLineEdit->text());
1929 settings.setValue("pppRefCrdZ", _pppRefCrdZLineEdit->text());
1930 settings.setValue("pppRefdN", _pppRefdNLineEdit->text());
1931 settings.setValue("pppRefdE", _pppRefdELineEdit->text());
1932 settings.setValue("pppRefdU", _pppRefdULineEdit->text());
1933 settings.setValue("nmeaFile", _pppNMEALineEdit->text());
1934 settings.setValue("nmeaPort", _pppNMEAPortLineEdit->text());
1935 settings.setValue("pppPlotCoordinates", _pppPlotCoordinates->checkState());
1936 settings.setValue("useOsmMap", _osmRadioButton->isChecked());
1937 settings.setValue("mapWinDotSize", _mapWinDotSizeLineEdit->text());
1938 settings.setValue("mapWinDotColor", _mapWinDotColorComboBox->currentText());
1939 settings.setValue("mapSpeed", _mapSpeedSlider->value());
1940 settings.setValue("postObsFile", _postObsFileChooser->fileName());
1941 settings.setValue("postNavFile", _postNavFileChooser->fileName());
1942 settings.setValue("postCorrFile", _postCorrFileChooser->fileName());
1943 settings.setValue("postOutFile", _postOutLineEdit->text());
1944 settings.setValue("pppAntenna", _pppAntennaLineEdit->text());
1945 settings.setValue("pppAntex", _pppAntexFileChooser->fileName());
1946 settings.setValue("pppUsePhase", _pppUsePhaseCheckBox->checkState());
1947 settings.setValue("pppEstTropo", _pppEstTropoCheckBox->checkState());
1948 settings.setValue("pppGLONASS", _pppGLONASSCheckBox->checkState());
1949 settings.setValue("pppGalileo", _pppGalileoCheckBox->checkState());
1950 settings.setValue("pppSync", _pppSync->text());
1951 settings.setValue("pppAverage", _pppAverageLineEdit->text());
1952 settings.setValue("pppQuickStart", _pppQuickStartLineEdit->text());
1953 settings.setValue("pppMaxSolGap", _pppMaxSolGapLineEdit->text());
1954 settings.setValue("pppAudioResponse", _pppAudioResponseLineEdit->text());
1955 settings.setValue("pppSigmaCode",_pppSigCLineEdit->text());
1956 settings.setValue("pppSigmaPhase",_pppSigPLineEdit->text());
1957 settings.setValue("pppSigCrd0",_pppSigCrd0->text());
1958 settings.setValue("pppSigCrdP",_pppSigCrdP->text());
1959 settings.setValue("pppSigTrp0",_pppSigTrp0->text());
1960 settings.setValue("pppSigTrpP",_pppSigTrpP->text());
1961// Reqc
1962 settings.setValue("reqcAction", _reqcActionComboBox->currentText());
1963 settings.setValue("reqcObsFile", _reqcObsFileChooser->fileName());
1964 settings.setValue("reqcNavFile", _reqcNavFileChooser->fileName());
1965 settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1966 settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1967 settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1968 settings.setValue("reqcPlotDir", _reqcPlotDirLineEdit->text());
1969 settings.setValue("reqcSkyPlotSystems", _reqcSkyPlotSystems->currentText());
1970// Combine Corrections
1971 if (!combineStreams.isEmpty()) {
1972 settings.setValue("combineStreams", combineStreams);
1973 }
1974 else {
1975 settings.setValue("combineStreams", "");
1976 }
1977 settings.setValue("cmbMethod", _cmbMethodComboBox->currentText());
1978 settings.setValue("cmbMaxres", _cmbMaxresLineEdit->text());
1979 settings.setValue("cmbSampl", _cmbSamplSpinBox->value());
1980// Upload Corrections
1981 if (!uploadMountpointsOut.isEmpty()) {
1982 settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1983 }
1984 else {
1985 settings.setValue("uploadMountpointsOut", "");
1986 }
1987 settings.setValue("uploadIntr", _uploadIntrComboBox->currentText());
1988 settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1989 settings.setValue("uploadSamplSp3", _uploadSamplSp3SpinBox->value());
1990 settings.setValue("uploadSamplClkRnx", _uploadSamplClkRnxSpinBox->value());
1991// Upload Ephemeris
1992 settings.setValue("uploadEphHost", _uploadEphHostLineEdit->text());
1993 settings.setValue("uploadEphPort", _uploadEphPortLineEdit->text());
1994 settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1995 settings.setValue("uploadEphPassword", _uploadEphPasswordLineEdit->text());
1996 settings.setValue("uploadEphSample", _uploadEphSampleSpinBox->value());
1997
1998#ifdef RTROVER_INTERFACE
1999 settings.setValue("rtroverMode", _rtroverModeComboBox->currentText());
2000 settings.setValue("rtroverRoverMount", _rtroverRoverMountLineEdit->text());
2001 settings.setValue("rtroverCorrMount", _rtroverCorrMountLineEdit->text());
2002 settings.setValue("rtroverBaseMount", _rtroverBaseMountLineEdit->text());
2003 settings.setValue("rtroverRoverRefCrdX", _rtroverRoverRefCrdXLineEdit->text());
2004 settings.setValue("rtroverRoverRefCrdY", _rtroverRoverRefCrdYLineEdit->text());
2005 settings.setValue("rtroverRoverRefCrdZ", _rtroverRoverRefCrdZLineEdit->text());
2006 settings.setValue("rtroverBaseRefCrdX", _rtroverBaseRefCrdXLineEdit->text());
2007 settings.setValue("rtroverBaseRefCrdY", _rtroverBaseRefCrdYLineEdit->text());
2008 settings.setValue("rtroverBaseRefCrdZ", _rtroverBaseCrdZLineEdit->text());
2009 settings.setValue("rtroverRoverDN", _rtroverRoverDNLineEdit->text());
2010 settings.setValue("rtroverRoverDE", _rtroverRoverDELineEdit->text());
2011 settings.setValue("rtroverRoverDU", _rtroverRoverDULineEdit->text());
2012 settings.setValue("rtroverBaseDN", _rtroverBaseDNLineEdit->text());
2013 settings.setValue("rtroverBaseDE", _rtroverBaseDELineEdit->text());
2014 settings.setValue("rtroverBaseDU", _rtroverBaseDULineEdit->text());
2015 settings.setValue("rtroverRoverAntenna", _rtroverRoverAntennaLineEdit->text());
2016 settings.setValue("rtroverBaseAntenna", _rtroverBaseAntennaLineEdit->text());
2017 settings.setValue("rtroverAntex", _rtroverAntexFileChooser->fileName());
2018 settings.setValue("rtroverOutput", _rtroverOutputLineEdit->text());
2019#endif
2020
2021 if (_caster) {
2022 _caster->readMountPoints();
2023 }
2024}
2025
2026// All get slots terminated
2027////////////////////////////////////////////////////////////////////////////
2028void bncWindow::slotGetThreadsFinished() {
2029 BNC_CORE->slotMessage("All Get Threads Terminated", true);
2030 delete _caster; _caster = 0;
2031 delete _casterEph; _casterEph = 0;
2032 _runningRealTime = false;
2033}
2034
2035// Start It!
2036////////////////////////////////////////////////////////////////////////////
2037void bncWindow::slotStart() {
2038 saveOptions();
2039 if ( _pppSPPComboBox->currentText() == "Post-Processing" ) {
2040 startPostProcessingPPP();
2041 }
2042 else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2043 startPostProcessingReqc();
2044 }
2045 else {
2046 startRealTime();
2047 }
2048}
2049
2050// Start Real-Time (Retrieve Data etc.)
2051////////////////////////////////////////////////////////////////////////////
2052void bncWindow::startRealTime() {
2053
2054 _runningRealTime = true;
2055
2056 _bncFigurePPP->reset();
2057
2058 _actDeleteMountPoints->setEnabled(false);
2059
2060 enableStartStop();
2061
2062 _caster = new bncCaster();
2063
2064 BNC_CORE->setPort(_outEphPortLineEdit->text().toInt());
2065 BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2066 BNC_CORE->initCombination();
2067
2068 connect(_caster, SIGNAL(getThreadsFinished()),
2069 this, SLOT(slotGetThreadsFinished()));
2070
2071 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2072 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2073
2074 BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " =========", true);
2075
2076 bncSettings settings;
2077
2078 QDir rnxdir(settings.value("rnxPath").toString());
2079 if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2080
2081 QString rnx_file = settings.value("rnxScript").toString();
2082 if ( !rnx_file.isEmpty() ) {
2083 QFile rnxfile(settings.value("rnxScript").toString());
2084 if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2085 }
2086
2087 QDir ephdir(settings.value("ephPath").toString());
2088 if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2089
2090 QDir corrdir(settings.value("corrPath").toString());
2091 if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2092
2093 QString advise_file = settings.value("adviseScript").toString();
2094 if ( !advise_file.isEmpty() ) {
2095 QFile advisefile(settings.value("adviseScript").toString());
2096 if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2097 }
2098
2099 QString ant_file = settings.value("pppAntex").toString();
2100 if ( !ant_file.isEmpty() ) {
2101 QFile anxfile(settings.value("pppAntex").toString());
2102 if (!anxfile.exists()) BNC_CORE->slotMessage("Cannot find IGS ANTEX file", true);
2103 }
2104
2105 _caster->readMountPoints();
2106
2107 _casterEph = new bncEphUploadCaster();
2108 connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2109 _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2110}
2111
2112// Retrieve Data
2113////////////////////////////////////////////////////////////////////////////
2114void bncWindow::slotStop() {
2115 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
2116 QMessageBox::Yes, QMessageBox::No,
2117 QMessageBox::NoButton);
2118 if (iRet == QMessageBox::Yes) {
2119 BNC_CORE->stopCombination();
2120 delete _caster; _caster = 0;
2121 delete _casterEph; _casterEph = 0;
2122 _runningRealTime = false;
2123 enableStartStop();
2124 }
2125}
2126
2127// Close Application gracefully
2128////////////////////////////////////////////////////////////////////////////
2129void bncWindow::closeEvent(QCloseEvent* event) {
2130
2131 int iRet = QMessageBox::question(this, "Close", "Save Options?",
2132 QMessageBox::Yes, QMessageBox::No,
2133 QMessageBox::Cancel);
2134
2135 if (iRet == QMessageBox::Cancel) {
2136 event->ignore();
2137 return;
2138 }
2139 else if (iRet == QMessageBox::Yes) {
2140 slotSaveOptions();
2141 }
2142
2143 if (_postProcessing) {
2144 _postProcessing->terminate();
2145 }
2146
2147 QMainWindow::closeEvent(event);
2148}
2149
2150// User changed the selection of mountPoints
2151////////////////////////////////////////////////////////////////////////////
2152void bncWindow::slotSelectionChanged() {
2153 if (_mountPointsTable->selectedItems().isEmpty()) {
2154 _actDeleteMountPoints->setEnabled(false);
2155 }
2156 else {
2157 _actDeleteMountPoints->setEnabled(true);
2158 }
2159}
2160
2161// Display Program Messages
2162////////////////////////////////////////////////////////////////////////////
2163void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2164
2165#ifdef DEBUG_RTCM2_2021
2166 const int maxBufferSize = 1000;
2167#else
2168 const int maxBufferSize = 10000;
2169#endif
2170
2171 if (! showOnScreen ) {
2172 return;
2173 }
2174
2175 QString txt = _log->toPlainText() + "\n" +
2176 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
2177 _log->clear();
2178 _log->append(txt.right(maxBufferSize));
2179}
2180
2181// About Message
2182////////////////////////////////////////////////////////////////////////////
2183void bncWindow::slotAbout() {
2184 new bncAboutDlg(0);
2185}
2186
2187//Flowchart
2188////////////////////////////////////////////////////////////////////////////
2189void bncWindow::slotFlowchart() {
2190 new bncFlowchartDlg(0);
2191}
2192
2193// Help Window
2194////////////////////////////////////////////////////////////////////////////
2195void bncWindow::slotHelp() {
2196 QUrl url;
2197 url.setPath(":bnchelp.html");
2198 new bncHlpDlg(0, url);
2199}
2200
2201// Select Fonts
2202////////////////////////////////////////////////////////////////////////////
2203void bncWindow::slotFontSel() {
2204 bool ok;
2205 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2206 if (ok) {
2207 bncSettings settings;
2208 settings.setValue("font", newFont.toString());
2209 QApplication::setFont(newFont);
2210 int ww = QFontMetrics(newFont).width('w');
2211 setMinimumSize(60*ww, 80*ww);
2212 resize(60*ww, 80*ww);
2213 }
2214}
2215
2216// Whats This Help
2217void bncWindow::slotWhatsThis() {
2218 QWhatsThis::enterWhatsThisMode();
2219}
2220
2221//
2222////////////////////////////////////////////////////////////////////////////
2223void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2224 _threads = threads;
2225
2226 _bncFigure->updateMountPoints();
2227 _bncFigureLate->updateMountPoints();
2228
2229 populateMountPointsTable();
2230 bncSettings settings;
2231 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
2232 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
2233 QListIterator<bncGetThread*> iTh(threads);
2234 while (iTh.hasNext()) {
2235 bncGetThread* thread = iTh.next();
2236 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2237 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2238 "@" + _mountPointsTable->item(iRow, 1)->text() );
2239 if (url == thread->mountPoint() &&
2240 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
2241 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
2242 ((bncTableItem*) _mountPointsTable->item(iRow, 7))->setGetThread(thread);
2243 disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2244 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2245 connect(thread, SIGNAL(newBytes(QByteArray, double)),
2246 _bncFigure, SLOT(slotNewData(QByteArray, double)));
2247 disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2248 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2249 connect(thread, SIGNAL(newLatency(QByteArray, double)),
2250 _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2251 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2252 disconnect(thread,
2253 SIGNAL(newPosition(bncTime, double, double, double)),
2254 _bncFigurePPP,
2255 SLOT(slotNewPosition(bncTime, double, double, double)));
2256 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2257 _bncFigurePPP,
2258 SLOT(slotNewPosition(bncTime, double, double, double)));
2259 }
2260#ifdef QT_WEBKIT
2261 if (_mapWin) {
2262 disconnect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2263 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2264 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2265 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2266 }
2267#endif
2268 break;
2269 }
2270 }
2271 }
2272}
2273
2274//
2275////////////////////////////////////////////////////////////////////////////
2276void bncWindow::CreateMenu() {
2277 // Create Menus
2278 // ------------
2279 _menuFile = menuBar()->addMenu(tr("&File"));
2280 _menuFile->addAction(_actFontSel);
2281 _menuFile->addSeparator();
2282 _menuFile->addAction(_actSaveOpt);
2283 _menuFile->addSeparator();
2284 _menuFile->addAction(_actQuit);
2285
2286 _menuHlp = menuBar()->addMenu(tr("&Help"));
2287 _menuHlp->addAction(_actHelp);
2288 _menuHlp->addAction(_actFlowchart);
2289 _menuHlp->addAction(_actAbout);
2290}
2291
2292// Toolbar
2293////////////////////////////////////////////////////////////////////////////
2294void bncWindow::AddToolbar() {
2295 QToolBar* toolBar = new QToolBar;
2296 addToolBar(Qt::BottomToolBarArea, toolBar);
2297 toolBar->setMovable(false);
2298 toolBar->addAction(_actAddMountPoints);
2299 toolBar->addAction(_actDeleteMountPoints);
2300 toolBar->addAction(_actMapMountPoints);
2301 toolBar->addAction(_actStart);
2302 toolBar->addAction(_actStop);
2303 toolBar->addWidget(new QLabel(" "));
2304 toolBar->addAction(_actwhatsthis);
2305}
2306
2307// About
2308////////////////////////////////////////////////////////////////////////////
2309bncAboutDlg::bncAboutDlg(QWidget* parent) :
2310 QDialog(parent) {
2311
2312 QTextBrowser* tb = new QTextBrowser;
2313 QUrl url; url.setPath(":bncabout.html");
2314 tb->setSource(url);
2315 tb->setReadOnly(true);
2316
2317 int ww = QFontMetrics(font()).width('w');
2318 QPushButton* _closeButton = new QPushButton("Close");
2319 _closeButton->setMaximumWidth(10*ww);
2320 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2321
2322 QGridLayout* dlgLayout = new QGridLayout();
2323 QLabel* img = new QLabel();
2324 img->setPixmap(QPixmap(":ntrip-logo.png"));
2325 dlgLayout->addWidget(img, 0,0);
2326 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2327 dlgLayout->addWidget(tb,1,0,1,2);
2328 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2329
2330 setLayout(dlgLayout);
2331 resize(60*ww, 60*ww);
2332 setWindowTitle("About BNC");
2333 show();
2334}
2335
2336//
2337////////////////////////////////////////////////////////////////////////////
2338bncAboutDlg::~bncAboutDlg() {
2339};
2340
2341// Flowchart
2342////////////////////////////////////////////////////////////////////////////
2343bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2344 QDialog(parent) {
2345
2346 int ww = QFontMetrics(font()).width('w');
2347 QPushButton* _closeButton = new QPushButton("Close");
2348 _closeButton->setMaximumWidth(10*ww);
2349 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2350
2351 QGridLayout* dlgLayout = new QGridLayout();
2352 QLabel* img = new QLabel();
2353 img->setPixmap(QPixmap(":bncflowchart.png"));
2354 dlgLayout->addWidget(img, 0,0);
2355 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2356
2357 setLayout(dlgLayout);
2358 setWindowTitle("Flow Chart");
2359 show();
2360}
2361
2362//
2363////////////////////////////////////////////////////////////////////////////
2364bncFlowchartDlg::~bncFlowchartDlg() {
2365};
2366
2367// Enable/Disable Widget (and change its color)
2368////////////////////////////////////////////////////////////////////////////
2369void bncWindow::enableWidget(bool enable, QWidget* widget) {
2370 const static QPalette paletteWhite(QColor(255, 255, 255));
2371 const static QPalette paletteGray(QColor(230, 230, 230));
2372
2373 widget->setEnabled(enable);
2374 if (enable) {
2375 widget->setPalette(paletteWhite);
2376 }
2377 else {
2378 widget->setPalette(paletteGray);
2379 }
2380}
2381
2382// Bnc Text
2383////////////////////////////////////////////////////////////////////////////
2384void bncWindow::slotBncTextChanged(){
2385
2386 bool enable = true;
2387
2388 // Proxy
2389 //------
2390 if (sender() == 0 || sender() == _proxyHostLineEdit) {
2391 enable = !_proxyHostLineEdit->text().isEmpty();
2392 enableWidget(enable, _proxyPortLineEdit);
2393 }
2394
2395 // RINEX Observations
2396 // ------------------
2397 if (sender() == 0 || sender() == _rnxPathLineEdit) {
2398 enable = !_rnxPathLineEdit->text().isEmpty();
2399 enableWidget(enable, _rnxSamplSpinBox);
2400 enableWidget(enable, _rnxSkelLineEdit);
2401 enableWidget(enable, _rnxScrpLineEdit);
2402 enableWidget(enable, _rnxV3CheckBox);
2403 enableWidget(enable, _rnxIntrComboBox);
2404 }
2405
2406 // RINEX Ephemeris
2407 // ---------------
2408 if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _outEphPortLineEdit) {
2409 enable = !_ephPathLineEdit->text().isEmpty() || !_outEphPortLineEdit->text().isEmpty();
2410 enableWidget(enable, _ephIntrComboBox);
2411 enableWidget(enable, _ephV3CheckBox);
2412 }
2413
2414 // Broadcast Corrections
2415 // ---------------------
2416 if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2417 enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2418 enableWidget(enable, _corrIntrComboBox);
2419 }
2420
2421 // Feed Engine
2422 // -----------
2423 if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2424 enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2425 enableWidget(enable, _waitTimeSpinBox);
2426 enableWidget(enable, _binSamplSpinBox);
2427 }
2428
2429 // Serial Output
2430 // -------------
2431 if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2432 sender() == _serialAutoNMEAComboBox) {
2433 enable = !_serialMountPointLineEdit->text().isEmpty();
2434 enableWidget(enable, _serialPortNameLineEdit);
2435 enableWidget(enable, _serialBaudRateComboBox);
2436 enableWidget(enable, _serialParityComboBox);
2437 enableWidget(enable, _serialDataBitsComboBox);
2438 enableWidget(enable, _serialStopBitsComboBox);
2439 enableWidget(enable, _serialFlowControlComboBox);
2440 enableWidget(enable, _serialAutoNMEAComboBox);
2441
2442 bool enable2 = enable && _serialAutoNMEAComboBox->currentText() != "Auto";
2443 enableWidget(enable2, _serialFileNMEALineEdit);
2444 }
2445
2446 // Outages
2447 // -------
2448 if (sender() == 0 || sender() == _obsRateComboBox) {
2449 enable = !_obsRateComboBox->currentText().isEmpty();
2450 enableWidget(enable, _adviseFailSpinBox);
2451 enableWidget(enable, _adviseRecoSpinBox);
2452 enableWidget(enable, _adviseScriptLineEdit);
2453 }
2454
2455 // Miscellaneous
2456 // -------------
2457 if (sender() == 0 || sender() == _miscMountLineEdit) {
2458 enable = !_miscMountLineEdit->text().isEmpty();
2459 enableWidget(enable, _perfIntrComboBox);
2460 enableWidget(enable, _scanRTCMCheckBox);
2461 enableWidget(enable, _miscPortLineEdit);
2462 }
2463
2464 // Enable/disable Broadcast Ephemerides
2465 // ------------------------------------
2466 if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2467 if (!_uploadEphHostLineEdit->text().isEmpty()) {
2468 _uploadEphPortLineEdit->setStyleSheet("background-color: white");
2469 _uploadEphMountpointLineEdit->setStyleSheet("background-color: white");
2470 _uploadEphPasswordLineEdit->setStyleSheet("background-color: white");
2471 _uploadEphSampleSpinBox->setStyleSheet("background-color: white");
2472 _uploadEphPortLineEdit->setEnabled(true);
2473 _uploadEphMountpointLineEdit->setEnabled(true);
2474 _uploadEphPasswordLineEdit->setEnabled(true);
2475 _uploadEphSampleSpinBox->setEnabled(true);
2476 }
2477 else {
2478 _uploadEphPortLineEdit->setStyleSheet("background-color: lightGray");
2479 _uploadEphMountpointLineEdit->setStyleSheet("background-color: lightGray");
2480 _uploadEphPasswordLineEdit->setStyleSheet("background-color: lightGray");
2481 _uploadEphSampleSpinBox->setStyleSheet("background-color: lightGray");
2482 _uploadEphPortLineEdit->setEnabled(false);
2483 _uploadEphMountpointLineEdit->setEnabled(false);
2484 _uploadEphPasswordLineEdit->setEnabled(false);
2485 _uploadEphSampleSpinBox->setEnabled(false);
2486 }
2487 }
2488
2489 // Combine Corrections
2490 // -------------------
2491 if (sender() == 0 || sender() == _cmbTable) {
2492 int iRow = _cmbTable->rowCount();
2493 if (iRow > 0) {
2494 enableWidget(true, _cmbMethodComboBox);
2495 _cmbMaxresLineEdit->setStyleSheet("background-color: white");
2496 _cmbMaxresLineEdit->setEnabled(true);
2497 _cmbSamplSpinBox->setEnabled(true);
2498 }
2499 else {
2500 enableWidget(false, _cmbMethodComboBox);
2501 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2502 _cmbMaxresLineEdit->setEnabled(false);
2503 _cmbSamplSpinBox->setEnabled(false);
2504 }
2505 }
2506
2507 // Upload(clk)
2508 // -----------
2509 int iRow = _uploadTable->rowCount();
2510 if (iRow > 0) {
2511 enableWidget(true, _uploadIntrComboBox);
2512 enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2513 enableWidget(true, _uploadSamplClkRnxSpinBox);
2514 enableWidget(true, _uploadSamplSp3SpinBox);
2515 }
2516 else {
2517 enableWidget(false, _uploadIntrComboBox);
2518 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2519 enableWidget(false, _uploadSamplClkRnxSpinBox);
2520 enableWidget(false, _uploadSamplSp3SpinBox);
2521 }
2522
2523 // PPP Client
2524 // ----------
2525 if (sender() == 0
2526 || sender() == _pppMountLineEdit
2527 || sender() == _pppCorrMountLineEdit
2528 || sender() == _pppRefCrdXLineEdit
2529 || sender() == _pppRefCrdYLineEdit
2530 || sender() == _pppRefCrdZLineEdit
2531 || sender() == _pppRefdNLineEdit
2532 || sender() == _pppRefdELineEdit
2533 || sender() == _pppRefdULineEdit
2534 || sender() == _pppSync
2535 || sender() == _pppSPPComboBox
2536 || sender() == _pppQuickStartLineEdit
2537 || sender() == _pppEstTropoCheckBox
2538 || sender() == _pppUsePhaseCheckBox
2539 || sender() == _pppAntexFileChooser
2540#ifdef QT_WEBKIT
2541 || sender() == _mapWin
2542#endif
2543 ) {
2544
2545
2546 enable = !_pppSPPComboBox->currentText().isEmpty();
2547 if (enable) {
2548 enable = (!_pppMountLineEdit->text().isEmpty() && !_pppCorrMountLineEdit->text().isEmpty()) ||
2549 (!_pppMountLineEdit->text().isEmpty() && _pppSPPComboBox->currentText() == "Realtime-SPP") ||
2550 (_pppSPPComboBox->currentText() == "Post-Processing");
2551 }
2552
2553 enableWidget(enable, _pppNMEALineEdit);
2554 enableWidget(enable, _pppNMEAPortLineEdit);
2555 enableWidget(enable, _pppRefCrdXLineEdit);
2556 enableWidget(enable, _pppRefCrdYLineEdit);
2557 enableWidget(enable, _pppRefCrdZLineEdit);
2558 enableWidget(enable, _pppRefdNLineEdit);
2559 enableWidget(enable, _pppRefdELineEdit);
2560 enableWidget(enable, _pppRefdULineEdit);
2561 enableWidget(enable, _pppUsePhaseCheckBox);
2562 enableWidget(enable, _pppPlotCoordinates);
2563 enableWidget(enable, _mapWinButton);
2564 enableWidget(enable, _mapWinDotSizeLineEdit);
2565 enableWidget(enable, _mapWinDotColorComboBox);
2566 enableWidget(enable, _gmRadioButton);
2567 enableWidget(enable, _osmRadioButton);
2568 enableWidget(enable, _pppEstTropoCheckBox);
2569// enableWidget(enable, _pppGLONASSCheckBox);
2570 enableWidget(enable, _pppGalileoCheckBox);
2571// enableWidget(enable, _pppAntexFileChooser);
2572 enableWidget(enable, _pppSigCLineEdit);
2573 enableWidget(enable, _pppSigCrd0);
2574 enableWidget(enable, _pppSigCrdP);
2575
2576 bool enable2 = enable && !_pppRefCrdXLineEdit->text().isEmpty() &&
2577 !_pppRefCrdYLineEdit->text().isEmpty() &&
2578 !_pppRefCrdZLineEdit->text().isEmpty();
2579
2580 enableWidget(enable2, _pppAverageLineEdit);
2581 enableWidget(enable2, _pppQuickStartLineEdit);
2582
2583 bool enable3 = enable2 && !_pppQuickStartLineEdit->text().isEmpty();
2584 enableWidget(enable3, _pppMaxSolGapLineEdit);
2585 enableWidget(enable3, _pppAudioResponseLineEdit);
2586
2587 bool enable4 = enable && !_pppAntexFileChooser->fileName().isEmpty();
2588 enableWidget(enable4, _pppAntennaLineEdit);
2589
2590 bool enable5 = enable && _pppEstTropoCheckBox->isChecked();
2591 enableWidget(enable5, _pppSigTrp0);
2592 enableWidget(enable5, _pppSigTrpP);
2593
2594 bool enable6 = enable && _pppUsePhaseCheckBox->isChecked();
2595 enableWidget(enable6, _pppSigPLineEdit);
2596
2597 bool enable7 = enable && _pppSPPComboBox->currentText() == "Realtime-PPP";
2598 enableWidget(enable7, _pppSync);
2599
2600 bool enable8 = _pppSPPComboBox->currentText() == "Realtime-PPP";
2601 enableWidget(enable8, _pppCorrMountLineEdit);
2602
2603 bool enable9 = _pppSPPComboBox->currentText() == "Post-Processing";
2604 enableWidget(enable9, _postObsFileChooser);
2605 enableWidget(enable9, _postNavFileChooser);
2606 enableWidget(enable9, _postCorrFileChooser);
2607 enableWidget(enable9, _postOutLineEdit);
2608 enableWidget(enable9, _mapSpeedSlider);
2609
2610 bool enable10 = !_pppSPPComboBox->currentText().isEmpty() && !enable9;
2611 enableWidget(enable10, _pppMountLineEdit);
2612 }
2613
2614 if (sender() == 0 || sender() == _reqcActionComboBox) {
2615 enable = !_reqcActionComboBox->currentText().isEmpty();
2616 bool enable10 = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2617 enableWidget(enable && enable10, _reqcEditOptionButton);
2618 enableWidget(enable, _reqcObsFileChooser);
2619 enableWidget(enable, _reqcNavFileChooser);
2620 enableWidget(enable && enable10, _reqcOutObsLineEdit);
2621 enableWidget(enable && enable10, _reqcOutNavLineEdit);
2622 enableWidget(enable, _reqcOutLogLineEdit);
2623 enableWidget(enable && !enable10, _reqcPlotDirLineEdit);
2624 enableWidget(enable && !enable10, _reqcSkyPlotSystems);
2625 }
2626
2627 enableStartStop();
2628}
2629
2630//
2631////////////////////////////////////////////////////////////////////////////
2632void bncWindow::slotAddCmbRow() {
2633 int iRow = _cmbTable->rowCount();
2634 _cmbTable->insertRow(iRow);
2635 for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2636 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2637 }
2638}
2639
2640//
2641////////////////////////////////////////////////////////////////////////////
2642void bncWindow::slotDelCmbRow() {
2643 int nRows = _cmbTable->rowCount();
2644 bool flg[nRows];
2645 for (int iRow = 0; iRow < nRows; iRow++) {
2646 if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2647 flg[iRow] = true;
2648 }
2649 else {
2650 flg[iRow] = false;
2651 }
2652 }
2653 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2654 if (flg[iRow]) {
2655 _cmbTable->removeRow(iRow);
2656 }
2657 }
2658 nRows = _cmbTable->rowCount();
2659 if (nRows < 1) {
2660 enableWidget(false, _cmbMethodComboBox);
2661 _cmbMaxresLineEdit->setStyleSheet("background-color: lightGray");
2662 _cmbMaxresLineEdit->setEnabled(false);
2663 _cmbSamplSpinBox->setEnabled(false);
2664 }
2665}
2666
2667//
2668////////////////////////////////////////////////////////////////////////////
2669void bncWindow::populateCmbTable() {
2670
2671 for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2672 _cmbTable->removeRow(iRow);
2673 }
2674
2675 bncSettings settings;
2676
2677 int iRow = -1;
2678 QListIterator<QString> it(settings.value("combineStreams").toStringList());
2679 while (it.hasNext()) {
2680 QStringList hlp = it.next().split(" ");
2681 if (hlp.size() > 2) {
2682 ++iRow;
2683 _cmbTable->insertRow(iRow);
2684 }
2685 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2686 _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2687 }
2688 }
2689}
2690
2691//
2692////////////////////////////////////////////////////////////////////////////
2693void bncWindow::slotAddUploadRow() {
2694 int iRow = _uploadTable->rowCount();
2695 _uploadTable->insertRow(iRow);
2696 for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2697 if (iCol == 3) {
2698 QLineEdit* passwd = new QLineEdit();
2699 passwd->setFrame(false);
2700 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2701 _uploadTable->setCellWidget(iRow, iCol, passwd);
2702 }
2703 else if (iCol == 4) {
2704 QComboBox* system = new QComboBox();
2705 system->setEditable(false);
2706 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2707 system->setFrame(false);
2708 _uploadTable->setCellWidget(iRow, iCol, system);
2709 }
2710 else if (iCol == 5) {
2711 QCheckBox* com = new QCheckBox();
2712 _uploadTable->setCellWidget(iRow, iCol, com);
2713 }
2714 else if (iCol == 11) {
2715 bncTableItem* bncIt = new bncTableItem();
2716 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2717 _uploadTable->setItem(iRow, iCol, bncIt);
2718 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2719 }
2720 else {
2721 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2722 }
2723 }
2724}
2725
2726//
2727////////////////////////////////////////////////////////////////////////////
2728void bncWindow::slotDelUploadRow() {
2729 BNC_CORE->_uploadTableItems.clear();
2730 int nRows = _uploadTable->rowCount();
2731 bool flg[nRows];
2732 for (int iRow = 0; iRow < nRows; iRow++) {
2733 if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2734 flg[iRow] = true;
2735 }
2736 else {
2737 flg[iRow] = false;
2738 }
2739 }
2740 for (int iRow = nRows-1; iRow >= 0; iRow--) {
2741 if (flg[iRow]) {
2742 _uploadTable->removeRow(iRow);
2743 }
2744 }
2745 for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2746 BNC_CORE->_uploadTableItems[iRow] =
2747 (bncTableItem*) _uploadTable->item(iRow, 11);
2748 }
2749 nRows = _uploadTable->rowCount();
2750 if (nRows < 1) {
2751 enableWidget(false, _uploadIntrComboBox);
2752 enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2753 enableWidget(false, _uploadSamplSp3SpinBox);
2754 enableWidget(false, _uploadSamplClkRnxSpinBox);
2755 }
2756}
2757
2758//
2759////////////////////////////////////////////////////////////////////////////
2760void bncWindow::populateUploadTable() {
2761 for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2762 _uploadTable->removeRow(iRow);
2763 }
2764
2765 bncSettings settings;
2766
2767 int iRow = -1;
2768 QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2769 while (it.hasNext()) {
2770 QStringList hlp = it.next().split(",");
2771 if (hlp.size() > 6) {
2772 ++iRow;
2773 _uploadTable->insertRow(iRow);
2774 }
2775 for (int iCol = 0; iCol < hlp.size(); iCol++) {
2776 if (iCol == 3) {
2777 QLineEdit* passwd = new QLineEdit();
2778 passwd->setFrame(false);
2779 passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2780 passwd->setText(hlp[iCol]);
2781 _uploadTable->setCellWidget(iRow, iCol, passwd);
2782 }
2783 else if (iCol == 4) {
2784 QComboBox* system = new QComboBox();
2785 system->setEditable(false);
2786 system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2787 system->setFrame(false);
2788 system->setCurrentIndex(system->findText(hlp[iCol]));
2789 _uploadTable->setCellWidget(iRow, iCol, system);
2790 }
2791 else if (iCol == 5) {
2792 QCheckBox* com = new QCheckBox();
2793 if (hlp[iCol].toInt() == Qt::Checked) {
2794 com->setCheckState(Qt::Checked);
2795 }
2796 _uploadTable->setCellWidget(iRow, iCol, com);
2797 }
2798 else if (iCol == 11) {
2799 bncTableItem* bncIt = new bncTableItem();
2800 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2801 _uploadTable->setItem(iRow, iCol, bncIt);
2802 BNC_CORE->_uploadTableItems[iRow] = bncIt;
2803 }
2804 else {
2805 _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2806 }
2807 }
2808 }
2809}
2810
2811//
2812////////////////////////////////////////////////////////////////////////////
2813void bncWindow::slotSetUploadTrafo() {
2814 bncCustomTrafo* dlg = new bncCustomTrafo(this);
2815 dlg->exec();
2816 delete dlg;
2817}
2818
2819// Start Post-Processing PPP
2820////////////////////////////////////////////////////////////////////////////
2821void bncWindow::startPostProcessingPPP() {
2822#ifdef USE_POSTPROCESSING
2823 _runningPostProcessingPPP = true;
2824 _actStart->setText("0 Epochs");
2825 enableStartStop();
2826
2827 _postProcessing = new t_postProcessing(this, _mapSpeedSlider->maximum(), _mapSpeedSlider->value());
2828 connect(_postProcessing, SIGNAL(finished()), this, SLOT(slotFinishedPostProcessingPPP()));
2829 connect(_postProcessing, SIGNAL(progress(int)), this, SLOT(slotPostProgress(int)));
2830 connect(_mapSpeedSlider, SIGNAL(valueChanged(int)), _postProcessing, SLOT(slotSetSpeed(int)));
2831 bncSettings settings;
2832 if ( Qt::CheckState(settings.value("pppPlotCoordinates").toInt()) == Qt::Checked) {
2833 _bncFigurePPP->reset();
2834 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2835 _bncFigurePPP, SLOT(slotNewPosition(bncTime, double, double, double)));
2836 }
2837#ifdef QT_WEBKIT
2838 if (_mapWin) {
2839 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
2840 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
2841 }
2842#endif
2843
2844 _postProcessing->start();
2845#else
2846 QMessageBox::information(this, "Information",
2847 "Post-Processing Not Permitted");
2848#endif
2849}
2850
2851// Post-Processing PPP Finished
2852////////////////////////////////////////////////////////////////////////////
2853void bncWindow::slotFinishedPostProcessingPPP() {
2854#ifdef QT_WEBKIT
2855 if (_mapWin) {
2856 _postProcessing->disconnect(_mapWin);
2857 }
2858#endif
2859 _runningPostProcessingPPP = false;
2860 delete _postProcessing;
2861 _postProcessing = 0;
2862 QMessageBox::information(this, "Information",
2863 "Post-Processing Thread Finished");
2864 _actStart->setText("Start");
2865 enableStartStop();
2866}
2867
2868// Progress Bar Change
2869////////////////////////////////////////////////////////////////////////////
2870void bncWindow::slotPostProgress(int nEpo) {
2871 if (_actStart) {
2872 _actStart->setText(QString("%1 Epochs").arg(nEpo));
2873 }
2874}
2875
2876// Start Post-Processing Reqc
2877////////////////////////////////////////////////////////////////////////////
2878void bncWindow::startPostProcessingReqc() {
2879#ifdef USE_POSTPROCESSING
2880 _runningPostProcessingReqc = true;
2881 enableStartStop();
2882 if (_reqcActionComboBox->currentText() == "Analyze") {
2883 t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2884 connect(reqcAnalyze, SIGNAL(finished()),
2885 this, SLOT(slotFinishedPostProcessingReqc()));
2886 reqcAnalyze->start();
2887 }
2888 else {
2889 t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2890 connect(reqcEdit, SIGNAL(finished()),
2891 this, SLOT(slotFinishedPostProcessingReqc()));
2892 reqcEdit->start();
2893 }
2894#else
2895 QMessageBox::information(this, "Information",
2896 "Post-Processing Not Permitted");
2897#endif
2898}
2899
2900// Post-Processing Reqc Finished
2901////////////////////////////////////////////////////////////////////////////
2902void bncWindow::slotFinishedPostProcessingReqc() {
2903 _runningPostProcessingReqc = false;
2904 if (_reqcActionComboBox->currentText() != "Analyze") {
2905 QMessageBox::information(this, "Information",
2906 "RINEX Processing Thread Finished");
2907 }
2908 enableStartStop();
2909}
2910
2911// Edit teqc-like editing options
2912////////////////////////////////////////////////////////////////////////////
2913void bncWindow::slotReqcEditOption() {
2914 reqcDlg* dlg = new reqcDlg(this);
2915 dlg->move(this->pos().x()+50, this->pos().y()+50);
2916 dlg->exec();
2917 delete dlg;
2918}
2919
2920// Enable/Disable Start and Stop Buttons
2921////////////////////////////////////////////////////////////////////////////
2922void bncWindow::enableStartStop() {
2923
2924 if ( _pppSPPComboBox && _pppSPPComboBox->currentText() == "Post-Processing" ) {
2925 if (_runningPostProcessingPPP) {
2926 _actStart->setEnabled(false);
2927 }
2928 else {
2929 _actStart->setEnabled(true);
2930 }
2931 _actStop->setEnabled(false);
2932 }
2933 else if ( _reqcActionComboBox && !_reqcActionComboBox->currentText().isEmpty() ) {
2934 if (_runningPostProcessingReqc) {
2935 _actStart->setEnabled(false);
2936 }
2937 else {
2938 _actStart->setEnabled(true);
2939 }
2940 _actStop->setEnabled(false);
2941 }
2942 else {
2943 if (_runningRealTime) {
2944 _actStart->setEnabled(false);
2945 _actStop->setEnabled(true);
2946 }
2947 else {
2948 _actStop->setEnabled(false);
2949 if (_mountPointsTable->rowCount() == 0) {
2950 _actStart->setEnabled(false);
2951 }
2952 else {
2953 _actStart->setEnabled(true);
2954 }
2955 }
2956 }
2957}
2958
2959// Show Map
2960////////////////////////////////////////////////////////////////////////////
2961void bncWindow::slotMapMountPoints() {
2962 saveOptions();
2963 t_bncMap* bncMap = new t_bncMap(this);
2964 bncMap->setMinimumSize(800, 600);
2965 bncMap->setWindowTitle("Selected Mountpoints");
2966
2967 bncSettings settings;
2968 QListIterator<QString> it(settings.value("mountPoints").toStringList());
2969 while (it.hasNext()) {
2970 QStringList hlp = it.next().split(" ");
2971 if (hlp.size() < 5) continue;
2972 QUrl url(hlp[0]);
2973 double latDeg = hlp[2].toDouble();
2974 double lonDeg = hlp[3].toDouble();
2975 bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2976 }
2977
2978 bncMap->show();
2979}
2980
2981// Show Map
2982////////////////////////////////////////////////////////////////////////////
2983void bncWindow::slotMapPPP() {
2984#ifdef QT_WEBKIT
2985 saveOptions();
2986 enableWidget(false, _mapWinButton);
2987 enableWidget(false, _gmRadioButton);
2988 enableWidget(false, _osmRadioButton);
2989 enableWidget(false, _mapWinDotSizeLineEdit);
2990 enableWidget(false, _mapWinDotColorComboBox);
2991
2992 if (!_mapWin) {
2993 _mapWin = new bncMapWin(this);
2994 connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2995 QListIterator<bncGetThread*> it(_threads);
2996 while (it.hasNext()) {
2997 bncGetThread* thread = it.next();
2998 connect(thread, SIGNAL(newPosition(bncTime, double, double, double)),
2999 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
3000 }
3001 if (_postProcessing) {
3002 connect(_postProcessing, SIGNAL(newPosition(bncTime, double, double, double)),
3003 _mapWin, SLOT(slotNewPosition(bncTime, double, double, double)));
3004 }
3005 }
3006 _mapWin->show();
3007#else
3008 QMessageBox::information(this, "Information",
3009 "Qt Library compiled without QtWebKit");
3010#endif
3011}
3012
3013// Show Map
3014////////////////////////////////////////////////////////////////////////////
3015void bncWindow::slotMapPPPClosed() {
3016#ifdef QT_WEBKIT
3017 slotBncTextChanged();
3018 if (_mapWin) {
3019 QListIterator<bncGetThread*> it(_threads);
3020 while (it.hasNext()) {
3021 bncGetThread* thread = it.next();
3022 thread->disconnect(_mapWin);
3023 }
3024 if (_postProcessing) {
3025 _postProcessing->disconnect(_mapWin);
3026 }
3027 _mapWin->deleteLater();
3028 _mapWin = 0;
3029 }
3030#endif
3031}
Note: See TracBrowser for help on using the repository browser.