Index: trunk/BNC/src/bnchelp.html =================================================================== --- trunk/BNC/src/bnchelp.html (revision 8462) +++ trunk/BNC/src/bnchelp.html (revision 8463) @@ -1967,28 +1967,88 @@
-
-In the epoch-specific output every PRN follows its elevation and azimuth, as well as the number of observations types.
-For every observation type a letter for phase and code follows where 's' means cycle slip, 'g' gap and '.' means OK.
-For phase observations the signal-to-noise ratio follows, for code observations the multipath standard deviation.
-
-Note that in addition to cycle slips recorded in the RINEX 'file', cycle slips identified by BNC are reported as 'found'.
+
+
+The epoch-specific output +
+ ++Each 'Epoch Record' contains 9 parameters. Example: +
++> 2015 09 09 13 04 50.0000000 23 1.2 ++
+Their meaning is as follows: +
++Each of the 'Satellite Records' in such an epoch block carries information for one specific satellite. Example: +
++R10 49.67 46.84 8 L1C .. 52.3 C1C . 0.62 L1P .. 51.2 C1P . 0.52 L2C .. 42.9 C2C . 0.51 L2P .. 42.4 C2P . 0.40 ++
+A satellite-specific line starts with: +
++An observation type block, for example +
++L1C s. 34.3 ++
+contains +
++With respect to the summary note, that in addition to cycle slips recorded in the RINEX 'file', cycle slips identified by BNC are reported as 'found'.
-Multipath and signal-to-noise sky plots as well as plots for satellite availability, elevation and PDOP are produced per GNSS system and frequency with the multipath analysis based on CnC observation types (n = band / frequency). The 'Plots for signals' option lets you exactly specify the observation signals to be used for that and also enables the plot production. You can specify the navigation system (C = BDS, E = Galileo, G = GPS, J = QZSS, R = GLONASS, S = SBAS), the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for each navigation systems must be separated by blank character ' '. The following string is an example for option field 'Plots of signals':
-
-
- C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 --This default configuration will present: -
Examples for 'Plots for signals' option:
+Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default.