Index: /trunk/BNC/src/bnchelp.html
===================================================================
--- /trunk/BNC/src/bnchelp.html (revision 7682)
+++ /trunk/BNC/src/bnchelp.html (revision 7683)
@@ -707,5 +707,5 @@
File 'RinexObs.bnc'
-The purpose of this configuration is showing how to convert RTCM streams to
+Purpose: Convert RTCM streams to
RINEX Observation files. The configuration pulls streams from Ntrip
Broadcasters using Ntrip Version 1 to generate 15min 1Hz RINEX Version 3
@@ -715,8 +715,8 @@
File 'RinexEph.bnc'
-The purpose of this configuration is showing how to convert a RTCM stream
-carrying navigation messages to a RINEX Navigation file. The configuration
+Purpose: Convert a RTCM stream
+carrying navigation messages to RINEX Navigation files. The configuration
pulls a RTCM Version 3 stream with Broadcast Ephemeris coming from the
-real-time EUREF and IGS networks. It saves hourly RINEX Version 3 Navigation
+real-time EUREF and IGS networks and saves hourly RINEX Version 3 Navigation
files. See http://igs.bkg.bund.de/ntrip/ephemeris for further real-time
Broadcast Ephemeris resources.
@@ -724,5 +724,5 @@
File 'BrdcCorr.bnc'
-The purpose of this configuration is to save Broadcast Corrections from RTCM
+Purpose: Save Broadcast Corrections from RTCM
SSR messages in a plain ASCII format as hourly files. See
http://igs.bkg.bund.de/ntrip/orbits for further real-time IGS or EUREF
@@ -731,6 +731,6 @@
File 'RinexConcat.bnc'
-The purpose of this configuration is to concatenate RINEX Version 3 files to
-produce a concatenated file and edit the marker name in the file header. The
+Purpose: Concatenate several RINEX Version 3 files to
+produce one concatenated file and edit the marker name in the file header. The
sampling interval is set to 30 seconds. See section 'RINEX Editing & QC' in the
documentation for examples on how to call BNC from command line in 'no window'
@@ -739,6 +739,6 @@
File 'RinexQC.bnc'
-The purpose of this configuration is to check the quality of a RINEX Version 3
-file through a multipath analysis. Results are saved on disk in terms of a
+Purpose: Check the quality of a RINEX Version 3
+file by means of a multipath analysis. Results are saved on disk in terms of a
plot in PNG format. See section 'RINEX Editing & QC' in the documentation for
examples on how to call BNC from command line in 'no window' mode for RINEX
@@ -747,5 +747,5 @@
File 'RTK.bnc'
-The purpose of this configuration is to feed a serial connected receiver with
+Purpose: Feed a serial connected receiver with
observations from a reference station for conventional RTK. The stream is
scanned for RTCM messages. Message type numbers and latencies of incoming
@@ -754,5 +754,5 @@
File 'FeedEngine.bnc'
-The purpose of this configuration is to feed a real-time GNSS engine with
+Purpose: Feed a real-time GNSS engine with
observations from remote reference stations. The configuration pulls a single
stream from an Ntrip Broadcaster. It would of course be possible to pull
@@ -763,5 +763,5 @@
File 'PPP.bnc'
-The purpose of this configuration is Precise Point Positioning from
+Purpose: Precise Point Positioning from
observations of a rover receiver. The configuration reads RTCM Version 3
observations, a Broadcast Ephemeris stream and a stream with Broadcast
@@ -770,6 +770,6 @@
File 'PPPNet.bnc'
-The purpose of this configuration is to demonstrate simultaneous Precise
-Point Positioning for several rovers or several receivers from a network of
+Purpose: Precise
+Point Positioning for several rovers or receivers from a network of
reference stations in one BNC job. The possible maximum number of PPP solutions
per job depends on the processing power of the hosting computer. This example
@@ -780,5 +780,5 @@
File 'PPPQuickStart.bnc'
-The purpose of this configuration is Precise Point Positioning in Quick-Start
+Purpose: Precise Point Positioning in Quick-Start
mode from observations of a static receiver with precisely known position. The
configuration reads RTCM Version 3 observations, Broadcast Corrections and a
@@ -789,5 +789,5 @@
File 'PPPPostProc.bnc'
-The purpose of this configuration is Precise Point Positioning in post
+Purpose: Precise Point Positioning in post
processing mode. BNC reads RINEX Version 3 Observation and 3 Navigation files
and a Broadcast Correction file. PPP processing options are set to support
@@ -798,5 +798,5 @@
File 'PPPGoogleMaps.bnc'
-The purpose of this configuration is to track BNC's point positioning
+Purpose: Track BNC's point positioning
solution using Google Maps or OpenStreetMap as background. BNC reads a
RINEX Observation file and a RINEX Navigation file to carry out a
@@ -809,12 +809,12 @@
File 'SPPQuickStartGal.bnc'
-The purpose of this configuration is Single Point Positioning in Quick-Start
-mode from observations of a static receiver with precisely known position. The
-configuration uses GPS, GLONASS and Galileo observations and a Broadcast
+Purpose: Single Point Positioning in Quick-Start mode from observations of a static
+receiver with precisely known position.
+The configuration uses GPS, GLONASS and Galileo observations and a Broadcast
Ephemeris stream.
File 'SaveSp3.bnc'
-The purpose of this configuration is to produce SP3 files from a Broadcast
+Purpose: Produces SP3 files from a Broadcast
Ephemeris stream and a Broadcast Correction stream. The Broadcast Correction
stream is formally introduced in BNC's 'Combine Corrections' table. Note that
@@ -824,15 +824,15 @@
File 'Sp3ETRF2000PPP.bnc'
-The purpose of this configuration is to produce SP3 files from a Broadcast
+Purpose: Produce SP3 files from a Broadcast
Ephemeris stream and a stream carrying ETRF2000 Broadcast Corrections. The
Broadcast Correction stream is formally introduced in BNC's 'Combine
-Corrections' table. This leads to a SP3 file containing orbits referred also
+Corrections' table. The configuration leads to a SP3 file containing orbits referred also
to ETRF2000. Pulling in addition observations from a reference station at
precisely known ETRF2000 position allows comparing an 'INTERNAL' PPP solution
-with ETRF2000 reference coordinates.
+with a known ETRF2000 reference coordinate.
File 'Upload.bnc'
-The purpose of this configuration is to upload orbits and clocks from a
+Purpose: Upload orbits and clocks from a
real-time GNSS engine to an Ntrip Broadcaster. For that the configuration reads
precise orbits and clocks in RTNET format. It also reads a stream carrying
@@ -845,5 +845,5 @@
File 'Combi.bnc'
-The purpose of this configuration is to pull several streams carrying Broadcast
+Purpose: Pull several streams carrying Broadcast
Corrections and a Broadcast Ephemeris stream from an Ntrip Broadcaster to
produce a combined Broadcast Correction stream. BNC encodes the combination
@@ -855,5 +855,5 @@
File 'CombiPPP.bnc'
-This configuration equals the 'Combi.bnc' configuration. However, the combined
+Purpose: This configuration equals the 'Combi.bnc' configuration. However, the combined
Broadcast Corrections are in addition used for an 'INTERNAL' PPP solutions
based on observations from a static reference station with known precise
@@ -863,5 +863,5 @@
File 'UploadEph.bnc'
-The purpose of this configuration is to pull a number of streams from reference
+Purpose: Pull a number of streams from reference
stations to get hold of contained Broadcast Ephemeris messages. These are
encoded then in a RTCM Version 3 stream with the sole purpose of providing
@@ -870,5 +870,5 @@
File 'CompareSp3.bnc'
-The purpose of this configuration is to compare two SP3 files to calculate
+Purpose: Compare two SP3 files to calculate
RMS values from orbit and clock differences. GPS satellite G05 and GLONASS
satellite R18 are excluded from this comparison. Comparison results are saved
@@ -877,6 +877,6 @@
File 'Empty.bnc'
-The purpose of this example is to provide an empty configuration file for BNC
-which only contains default settings.
+Purpose: Provide an empty example configuration file for
+BNC which only contains the default settings.