Changeset 7649 in ntrip for trunk/BNC

Timestamp:

Jan 4, 2016, 4:32:02 PM (8 years ago)

Author:

weber

Message:

Documentation completed

File:

• trunk/BNC/src/reqcdlg.cpp (modified) (1 diff)

trunk/BNC/src/reqcdlg.cpp

@@ -228 +228 @@
   mainLayout->addLayout(buttonLayout);
 
-  _reqcRnxVersion->setWhatsThis(tr("<p>Select version number of emerging new RINEX file.</p><p>When converting RINEX Version 2 to RINEX Version 3 Observation files, the tracking mode or channel information (signal attribute, see RINEX Version 3 document) in the (last character out of the three characters) observation code is left blank if unknown.</p><p>When converting RINEX Version 3 to RINEX Version 2 the mapping of observations follows a 'Signal priority list' with signal attributes as defined in RINEX Version 3.</p>")); 
-  _reqcUseObsTypes->setWhatsThis(tr("<p>This option lets you limit the RINEX output to specific observation types. Examples:</p><p><ul><li>G:C1C G:L1C R:C1C R:C1P S:C1C C:C1I C:L1I E:C1X E:L1X<br>(Valid for output of RINEX Version 3. Output contains GPS C1C and L1C, GLONASS C1C and C1P, SBAS C1C, BeiDou C1C, C1I andL1I, Galileo C1X and L1X.)</li><li>C1 L2 L5<br>(Valid for output of RINEX Version 2 with mapping of Version 3 signals to Version 2 according to 'Version 2 Signal Priority'. Output contains C1, L2 and L5 observations from any GNSS system.)</li></ul></p><p>Default is an empty option field, meaning that the RINEX output file contains all observations made available through RINEX input file.</p>"));
-  _reqcSampling->setWhatsThis(tr("<p>Select sampling rate of emerging new RINEX observation file.</p><p>'0 sec' means that observations from all epochs in the RINEX input file will become part of the RINEX output file.</p>"));
-  _reqcStartDateTime->setWhatsThis(tr("<p>Specify begin of emerging new RINEX observation file.</p>"));
-  _reqcEndDateTime->setWhatsThis(tr("<p>Specify end of emerging new RINEX observation file.</p>"));
-  _reqcOldMarkerName->setWhatsThis(tr("<p>Enter old marker name in RINEX observation file.</p><p>Default is an empty option field.</p>"));
-  _reqcNewMarkerName->setWhatsThis(tr("<p>Enter new marker name in RINEX observation file.</p><p>If option 'Old Marker Name' is either left blank or its contents is specified as given in the RINEX input file, then the marker name in the RINEX output file will be specified by 'New Marker Name'</p><p>Default is an empty option field, meaning that the contents of the marker name data field in the RINEX file will not be changed.</p>"));
-  _reqcOldAntennaName->setWhatsThis(tr("<p>Enter old antenna name in RINEX observation file.</p><p>Default is an empty option field.</p>"));
-  _reqcNewAntennaName->setWhatsThis(tr("<p>Enter new antenna name in RINEX observation file.</p><p>If option 'Old Antenna Name' is either left blank or its contents is specified as given in the RINEX input file, then the antenna name in the RINEX output file will be specified by 'New Antenna Name'</p><p>Default is an empty option field, meaning that the contents of the antenna name data field in the RINEX file will not be changed.</p>"));
-  _reqcOldAntennaNumber->setWhatsThis(tr("<p>Enter old antenna number in RINEX observation file.</p><p>Default is an empty option field.</p>"));
-  _reqcNewAntennaNumber->setWhatsThis(tr("<p>Enter new antenna number in RINEX observation file.</p><p>If option 'Old Antenna Number' is either left blank or its contents is specified as given in the RINEX input file, then the antenna number in the RINEX output file will be specified by 'New Antenna Number'</p><p>Default is an empty option field, meaning that the contents of the antenna number data field in the RINEX file will not be changed.</p>"));
-  _reqcOldAntennadN->setWhatsThis(tr("<p>Enter old north antenna eccentricity in RINEX observation file.</p><p>Default is an empty option field.</p>"));
-  _reqcNewAntennadN->setWhatsThis(tr("<p>Enter new north antenna eccentricity in RINEX observation file.</p><p>If option 'Old Antenna North Eccentricity' is either left blank or its contents is specified as given in the RINEX input file, then the north antenna eccentricity in the RINEX output file will be specified by 'New North Antenna Eccentricity'</p><p>Default is an empty option field, meaning that the contents of the north antenna eccentricity data field in the RINEX file will not be changed.</p>"));
-  _reqcOldAntennadE->setWhatsThis(tr("<p>Enter old east antenna eccentricity in RINEX observation file.</p><p>Default is an empty option field.</p>"));
-  _reqcNewAntennadE->setWhatsThis(tr("<p>Enter new east antenna eccentricity in RINEX observation file.</p><p>If option 'Old Antenna East Eccentricity' is either left blank or its contents is specified as given in the RINEX input file, then the east antenna eccentricity in the RINEX output file will be specified by 'New East Antenna Eccentricity'</p><p>Default is an empty option field, meaning that the contents of the east antenna eccentricity data field in the RINEX file will not be changed.</p>"));
-  _reqcOldAntennadU->setWhatsThis(tr("<p>Enter old up antenna eccentricity in RINEX observation file.</p><p>Default is an empty option field.</p>"));
-  _reqcNewAntennadU->setWhatsThis(tr("<p>Enter new up antenna eccentricity in RINEX observation file.</p><p>If option 'Old Antenna Up Eccentricity' is either left blank or its contents is specified as given in the RINEX input file, then the up antenna eccentricity in the RINEX output file will be specified by 'New Up Antenna Eccentricity'</p><p>Default is an empty option field, meaning that the contents of the up antenna eccentricity data field in the RINEX file will not be changed.</p>"));
-  _reqcOldReceiverName->setWhatsThis(tr("<p>Enter old receiver name in RINEX observation file.<p>Default is an empty option field.</p></p>"));
-  _reqcNewReceiverName->setWhatsThis(tr("<p>Enter new receiver name in RINEX observation file.</p><p>If option 'Old Receiver Name' is either left blank or its contents is specified as given in the RINEX input file, then the receiver name in the RINEX output file will be specified by 'New Receiver Name'</p><p>Default is an empty option field, meaning that the contents of the receiver name data field in the RINEX file will not be changed.</p>"));
-  _reqcOldReceiverNumber->setWhatsThis(tr("<p>Enter old receiver number in RINEX observation file.<p>Default is an empty option field.</p></p>"));
-  _reqcNewReceiverNumber->setWhatsThis(tr("<p>Enter new receiver number in RINEX observation file.</p><p>If option 'Old Receiver Number' is either left blank or its contents is specified as given in the RINEX input file, then the receiver number in the RINEX output file will be specified by 'New Receiver Number'</p><p>Default is an empty option field, meaning that the contents of the receiver number data field in the RINEX file will not be changed.</p>"));
-  _reqcComment->setWhatsThis(tr("<p>Specifying a comment line text to be added to the emerging new RINEX file header is an option. Any introduction of newline specification '\\n' in this enforces the beginning of a further comment line. The  comment line(s) will be added to the header after the 'PGM / RUN BY / DATE' record.</p><p>Default is an empty option field meaning that no additional comment line is added to the RINEX header.</p>"));
-  _reqcRunBy->setWhatsThis(tr("<p>Specify a 'RUN BY' string to be included in the emerging new RINEX file header.</p><p>Default is an empty option field meanig the operator's user ID is used as 'RUN BY' string.</p>"));
-  _reqcV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used in post processing mode to map RINEX Version 3 observation files to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified either as equal for all systems or system specifics. The following are example priority strings:</li><ul><li>'CWPX_?' (Same signal priorities valid for all systems)</li><li>'G:CWPX_? R:PCX_? E:CPX_?' (Specific signal priorities for GPS, GLONASS and Galileo system)</li></ul>Default is priority list 'CWPX_?'.</p>"));
+  // WhatsThis, RINEX Editing & QC
+  // -----------------------------
+  _reqcRnxVersion->setWhatsThis(tr("<p>Select version number of emerging new RINEX file.</p><p>Note the following:</p><p>When converting <u>RINEX Version 2 to Version 3 </u>Observation files, the tracking mode or channel information (signal attribute, see RINEX Version 3 documentation) in the (last out of the three characters) observation code is left blank if unknown.</p><p>When converting <u>RINEX Version 3 to Version 2</u>, the mapping of observations follows a 'Signal priority list' with signal attributes as defined in RINEX Version 3.</p>")); 
+  _reqcSampling->setWhatsThis(tr("<p>Select sampling rate of emerging new RINEX Observation file.</p><p>'0 sec' means that observations from all epochs in the RINEX input file will become part of the RINEX output file.</p>"));
+  _reqcV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used in post processing mode to map RINEX Version 3 observation files to Version 2. The underscore character '_' stands for undefined attributes. The question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified either as equal for all systems or as system specifics. The following are example priority strings:</li><ul><li>'CWPX_?' (Same signal priorities valid for all systems)</li><li>'G:CWPX_? R:PCX_? E:CPX_?' (Specific signal priorities for GPS, GLONASS and Galileo system)</li></ul>Default is priority list 'CWPX_?'.</p>"));
+  _reqcStartDateTime->setWhatsThis(tr("<p>Specify begin of emerging new RINEX Observation file.</p>"));
+  _reqcEndDateTime->setWhatsThis(tr("<p>Specify end of emerging new RINEX Observation file.</p>"));
+  _reqcRunBy->setWhatsThis(tr("<p>Specify a 'RUN BY' string to be included in the emerging new RINEX file header.</p><p>Default is an empty option field, meanig the operator's user ID is used as 'RUN BY' string.</p>"));
+  _reqcComment->setWhatsThis(tr("<p>Specifying a comment line text to be added to the emerging new RINEX file header is an option. Any introduction of newline specification '\\n' in this enforces the beginning of a further comment line. Comment line(s) will be added to the header after the 'PGM / RUN BY / DATE' record.</p><p>Default is an empty option field meaning that no additional comment line is added to the RINEX header.</p>"));
+  _reqcUseObsTypes->setWhatsThis(tr("<p>This option lets you limit the RINEX output to specific observation types. Examples:</p><p><ul><li>G:C1C G:L1C R:C1C R:C1P S:C1C C:C1I C:L1I E:C1X E:L1X<br>(Valid for output of RINEX Version 3; output contains GPS C1C and L1C, GLONASS C1C and C1P, SBAS C1C, BeiDou C1C, C1I andL1I, Galileo C1X and L1X.)</li><li>C1 L2 L5<br>(Valid for output of RINEX Version 2 with mapping of Version 3 signals to Version 2 according to 'Version 2 Signal Priority'; output contains C1, L2 and L5 observations from any GNSS system.)</li></ul></p><p>Default is an empty option field, meaning that the RINEX output file contains all observations made available through RINEX input file.</p>"));
+  _reqcOldMarkerName->setWhatsThis(tr("<p>Enter old Marker Name in RINEX Observation file.</p><p>Default is an empty option field.</p>"));
+  _reqcNewMarkerName->setWhatsThis(tr("<p>Enter new Marker Name in RINEX Observation file.</p><p>If option 'Old Marker Name' is either left blank or its content is specified as given in the RINEX input file, then the marker name in the RINEX output file will be specified by 'New Marker Name'</p><p>Default is an empty option field, meaning that the content of the marker name data field in the RINEX file will not be changed.</p>"));
+  _reqcOldAntennaName->setWhatsThis(tr("<p>Enter old Antenna Name in RINEX Observation file.</p><p>Default is an empty option field.</p>"));
+  _reqcNewAntennaName->setWhatsThis(tr("<p>Enter new Antenna Name in RINEX Observation file.</p><p>If option 'Old Antenna Name' is either left blank or its content is specified as given in the RINEX input file, then the antenna name in the RINEX output file will be specified by 'New Antenna Name'</p><p>Default is an empty option field, meaning that the content of the antenna name data field in the RINEX file will not be changed.</p>"));
+  _reqcOldAntennaNumber->setWhatsThis(tr("<p>Enter old Antenna Number in RINEX Observation file.</p><p>Default is an empty option field.</p>"));
+  _reqcNewAntennaNumber->setWhatsThis(tr("<p>Enter new Antenna Number in RINEX Observation file.</p><p>If option 'Old Antenna Number' is either left blank or its content is specified as given in the RINEX input file, then the antenna number in the RINEX output file will be specified by 'New Antenna Number'</p><p>Default is an empty option field, meaning that the content of the antenna number data field in the RINEX file will not be changed.</p>"));
+  _reqcOldAntennadN->setWhatsThis(tr("<p>Enter old North Antenna Eccentricity in RINEX Observation file.</p><p>Default is an empty option field.</p>"));
+  _reqcNewAntennadN->setWhatsThis(tr("<p>Enter new North Antenna Eccentricity in RINEX Observation file.</p><p>If option 'Old Antenna North Eccentricity' is either left blank or its content is specified as given in the RINEX input file, then the north antenna eccentricity in the RINEX output file will be specified by 'New North Antenna Eccentricity'</p><p>Default is an empty option field, meaning that the content of the north antenna eccentricity data field in the RINEX file will not be changed.</p>"));
+  _reqcOldAntennadE->setWhatsThis(tr("<p>Enter old East Antenna Eccentricity in RINEX Observation file.</p><p>Default is an empty option field.</p>"));
+  _reqcNewAntennadE->setWhatsThis(tr("<p>Enter new East Antenna Eccentricity in RINEX Observation file.</p><p>If option 'Old Antenna East Eccentricity' is either left blank or its content is specified as given in the RINEX input file, then the east antenna eccentricity in the RINEX output file will be specified by 'New East Antenna Eccentricity'</p><p>Default is an empty option field, meaning that the content of the east antenna eccentricity data field in the RINEX file will not be changed.</p>"));
+  _reqcOldAntennadU->setWhatsThis(tr("<p>Enter old Up Antenna Eccentricity in RINEX Observation file.</p><p>Default is an empty option field.</p>"));
+  _reqcNewAntennadU->setWhatsThis(tr("<p>Enter new Up Antenna Eccentricity in RINEX Observation file.</p><p>If option 'Old Antenna Up Eccentricity' is either left blank or its content is specified as given in the RINEX input file, then the up antenna eccentricity in the RINEX output file will be specified by 'New Up Antenna Eccentricity'</p><p>Default is an empty option field, meaning that the content of the up antenna eccentricity data field in the RINEX file will not be changed.</p>"));
+  _reqcOldReceiverName->setWhatsThis(tr("<p>Enter old Receiver Name in RINEX Observation file.<p>Default is an empty option field.</p></p>"));
+  _reqcNewReceiverName->setWhatsThis(tr("<p>Enter new Receiver Name in RINEX Observation file.</p><p>If option 'Old Receiver Name' is either left blank or its content is specified as given in the RINEX input file, then the receiver name in the RINEX output file will be specified by 'New Receiver Name'</p><p>Default is an empty option field, meaning that the content of the receiver name data field in the RINEX file will not be changed.</p>"));
+  _reqcOldReceiverNumber->setWhatsThis(tr("<p>Enter old Receiver Number in RINEX Observation file.<p>Default is an empty option field.</p></p>"));
+  _reqcNewReceiverNumber->setWhatsThis(tr("<p>Enter new Receiver Number in RINEX Observation file.</p><p>If option 'Old Receiver Number' is either left blank or its content is specified as given in the RINEX input file, then the receiver number in the RINEX output file will be specified by 'New Receiver Number'</p><p>Default is an empty option field, meaning that the content of the receiver number data field in the RINEX file will not be changed.</p>"));
 }