Changeset 7283 in ntrip
- Timestamp:
- Sep 15, 2015, 12:19:08 PM (9 years ago)
- File:
-
- 1 edited
-
trunk/BNC/src/bncmain.cpp (modified) (1 diff)
Legend:
- Unmodified
- Added
- Removed
-
trunk/BNC/src/bncmain.cpp
r7282 r7283 84 84 "\n" 85 85 "Internal keys:\n" 86 " --startTab <Top panel index number>\n"87 " --statusTab <Bottom panel index number>\n"88 " --font <Used font>\n"86 " startTab <Top panel index number>\n" 87 " statusTab <Bottom panel index number>\n" 88 " font <Used font>\n" 89 89 "\n" 90 90 "Network Panel keys:\n" 91 " --proxyHost <Proxy host>\n"92 " --proxyPort <Proxy port>\n"93 " --sslCaCertPath <Path to SSL certificates>\n"94 " --ignoreSslErrors <Ignore SSL authorization errors, 0=no, 2=yes>\n"91 " proxyHost <Proxy host>\n" 92 " proxyPort <Proxy port>\n" 93 " sslCaCertPath <Path to SSL certificates>\n" 94 " ignoreSslErrors <Ignore SSL authorization errors, 0=no, 2=yes>\n" 95 95 "\n" 96 96 "General Panel keys:\n" 97 " --logFile <Logfile, full path>\n"98 " --rnxAppend <Append files, 0=no, 2=yes>\n"99 " --onTheFlyInterval <Reread configuration, interval>\n"100 " --autoStart <Auto start, 0=no, 2=yes>\n"101 " --rawOutFile <Raw output file, full path>\n"97 " logFile <Logfile, full path>\n" 98 " rnxAppend <Append files, 0=no, 2=yes>\n" 99 " onTheFlyInterval <Reread configuration, interval>\n" 100 " autoStart <Auto start, 0=no, 2=yes>\n" 101 " rawOutFile <Raw output file, full path>\n" 102 102 "\n" 103 103 "RINEX Observations Panel keys:\n" 104 " --rnxPath <Directory>\n"105 " --rnxIntr <Interval>\n"106 " --rnxSample <Sampling [sec]> \n"107 " --rnxSkel <Skeleton file extension>\n"108 " --rnxOnlyWithSKL <Skeleton is mandatory, 0=no, 2=yes>\n"109 " --rnxScript <File upload script>\n"110 " --rnxV2Priority <Signal priority>\n"111 " --rnxV3 <Produce version 3 file contents, 0=no, 2=yes>\n"112 " --rnxV3filenames <Produce version 3 filenames, 0=no, 2=yes>\n"104 " rnxPath <Directory>\n" 105 " rnxIntr <Interval>\n" 106 " rnxSample <Sampling [sec]> \n" 107 " rnxSkel <Skeleton file extension>\n" 108 " rnxOnlyWithSKL <Skeleton is mandatory, 0=no, 2=yes>\n" 109 " rnxScript <File upload script>\n" 110 " rnxV2Priority <Signal priority>\n" 111 " rnxV3 <Produce version 3 file contents, 0=no, 2=yes>\n" 112 " rnxV3filenames <Produce version 3 filenames, 0=no, 2=yes>\n" 113 113 "\n" 114 114 "RINEX Ephemeris Panel keys:\n" 115 " --ephPath <Directory>\n"116 " --ephIntr <Interval>\n"117 " --outEphPort <Port>\n"118 " --ephV3 <Produce version 3 file contents, 0=no, 2=yes>\n"119 " --ephV3filenames <Produde version 3 filenames, 0=no, 2=yes>\n"115 " ephPath <Directory>\n" 116 " ephIntr <Interval>\n" 117 " outEphPort <Port>\n" 118 " ephV3 <Produce version 3 file contents, 0=no, 2=yes>\n" 119 " ephV3filenames <Produde version 3 filenames, 0=no, 2=yes>\n" 120 120 "\n" 121 121 "RINEX Editing and QC Panel keys:\n" 122 " --reqcAction <Action, Edit/Concatenate|Analyze>\n"123 " --reqcObsFile <Input observations file(s)>\n"124 " --reqcNavFile <Input navigation file(s)>\n"125 " --reqcOutObsFile <Output observations file>\n"126 " --reqcOutNavFile <Output navigation file>\n"127 " --reqcOutLogFile <Output logfile>\n"128 " --reqcLogSummaryOnly <Only summary output logfile, 0=no, 2=yes>\n"129 " --reqcSkyPlotSignals <Plots for signals list>\n"130 " --reqcPlotDir <QC plots directory>\n"131 " --reqcRnxVersion <RINEX version, 2|3>\n"132 " --reqcSampling <RINEX sampling [sec]>\n"133 " --reqcV2Priority <Version 2 signal priority list>\n"134 " --reqcStartDateTime <Start time>\n"135 " --reqcEndDateTime <Stop time>\n"136 " --reqcRunBy <Operators name>\n"137 " --reqcUseObsTypes <Use observation types list>\n"138 " --reqcComment <Additional comments>\n"139 " --reqcOldMarkerName <Old marker name>\n"140 " --reqcNewMarkerName <New marker name>\n"141 " --reqcOldAntennaName <Old antenna name>\n"142 " --reqcNewAntennaName <New antenna name>\n"143 " --reqcOldAntennaNumber <Old antenna number>\n"144 " --reqcNewAntennaNumber <New antenna number>\n"145 " --reqcOldAntennadN <Old north eccentritity>\n"146 " --reqcNewAntennadN <New north eccentricity>\n"147 " --reqcOldAntennadE <Old east eccentricity>\n"148 " --reqcNewAntennadE <New east eccentricity>\n"149 " --reqcOldAntennadU <Old up eccentritity>\n"150 " --reqcNewAntennadU <New up eccentricity>\n"151 " --reqcOldReceiverName <Old receiver name>\n"152 " --reqcNewReceiverName <New receiver name>\n"153 " --reqcOldReceiverNumber <Old receiver number>\n"154 " --reqcNewReceiverNumber <New receiver number>\n"122 " reqcAction <Action, Edit/Concatenate|Analyze>\n" 123 " reqcObsFile <Input observations file(s)>\n" 124 " reqcNavFile <Input navigation file(s)>\n" 125 " reqcOutObsFile <Output observations file>\n" 126 " reqcOutNavFile <Output navigation file>\n" 127 " reqcOutLogFile <Output logfile>\n" 128 " reqcLogSummaryOnly <Only summary output logfile, 0=no, 2=yes>\n" 129 " reqcSkyPlotSignals <Plots for signals list>\n" 130 " reqcPlotDir <QC plots directory>\n" 131 " reqcRnxVersion <RINEX version, 2|3>\n" 132 " reqcSampling <RINEX sampling [sec]>\n" 133 " reqcV2Priority <Version 2 signal priority list>\n" 134 " reqcStartDateTime <Start time>\n" 135 " reqcEndDateTime <Stop time>\n" 136 " reqcRunBy <Operators name>\n" 137 " reqcUseObsTypes <Use observation types list>\n" 138 " reqcComment <Additional comments>\n" 139 " reqcOldMarkerName <Old marker name>\n" 140 " reqcNewMarkerName <New marker name>\n" 141 " reqcOldAntennaName <Old antenna name>\n" 142 " reqcNewAntennaName <New antenna name>\n" 143 " reqcOldAntennaNumber <Old antenna number>\n" 144 " reqcNewAntennaNumber <New antenna number>\n" 145 " reqcOldAntennadN <Old north eccentritity>\n" 146 " reqcNewAntennadN <New north eccentricity>\n" 147 " reqcOldAntennadE <Old east eccentricity>\n" 148 " reqcNewAntennadE <New east eccentricity>\n" 149 " reqcOldAntennadU <Old up eccentritity>\n" 150 " reqcNewAntennadU <New up eccentricity>\n" 151 " reqcOldReceiverName <Old receiver name>\n" 152 " reqcNewReceiverName <New receiver name>\n" 153 " reqcOldReceiverNumber <Old receiver number>\n" 154 " reqcNewReceiverNumber <New receiver number>\n" 155 155 "\n" 156 156 "SP3 Comparison Panel keys:\n" 157 " --sp3CompFile <SP3 input files, full path>\n"158 " --sp3CompExclude <Satellite exclusion list>\n"159 " --sp3CompOutLogFile <Output logfile>\n"157 " sp3CompFile <SP3 input files, full path>\n" 158 " sp3CompExclude <Satellite exclusion list>\n" 159 " sp3CompOutLogFile <Output logfile>\n" 160 160 "\n" 161 161 "Broadcast Corrections Panel keys:\n" 162 " --corrPath <Directory for saving files in ASCII format>\n"163 " --corrIntr <Interval>\n"164 " --corrPort <Port>\n"162 " corrPath <Directory for saving files in ASCII format>\n" 163 " corrIntr <Interval>\n" 164 " corrPort <Port>\n" 165 165 "\n" 166 166 "Feed Engine Panel keys:\n" 167 " --outPort <Port>\n"168 " --waitTime <Wait for full obs epoch [sec]>\n"169 " --binSampl <Sampling [sec]>\n"170 " --outFile <File, full path>\n"171 " --outUPort <Port, unsynchronized output)>\n"167 " outPort <Port>\n" 168 " waitTime <Wait for full obs epoch [sec]>\n" 169 " binSampl <Sampling [sec]>\n" 170 " outFile <File, full path>\n" 171 " outUPort <Port, unsynchronized output)>\n" 172 172 "\n" 173 173 "Serial Output Panel:\n" 174 " --serialMountPoint <Mountpoint>\n"175 " --serialPortName <Port name>\n"176 " --serialBaudRate <Baud rate, 110|300|600|1200|2400|4800|9600|...>\n"177 " --serialFlowControl <Flow control, OFF|XONXOFF|HARDWARE>\n"178 " --serialDataBits <Data bits, 5|6|7|8>\n"179 " --serialParity <Parity, NONE|ODD|EVEN|SPACE>\n"180 " --serialStopBits <Stop bits, 1|2>\n"181 " --serialAutoNMEA <NMEA, no|Auto|Manual GPGGA|Manual GNGGA>\n"182 " --serialFileNMEA <NMEA filename>\n"183 " --serialHeightNMEA <Height>\n"184 " --serialHeightNMEASampling <Sampling [sec]>\n"174 " serialMountPoint <Mountpoint>\n" 175 " serialPortName <Port name>\n" 176 " serialBaudRate <Baud rate, 110|300|600|1200|2400|4800|9600|...>\n" 177 " serialFlowControl <Flow control, OFF|XONXOFF|HARDWARE>\n" 178 " serialDataBits <Data bits, 5|6|7|8>\n" 179 " serialParity <Parity, NONE|ODD|EVEN|SPACE>\n" 180 " serialStopBits <Stop bits, 1|2>\n" 181 " serialAutoNMEA <NMEA, no|Auto|Manual GPGGA|Manual GNGGA>\n" 182 " serialFileNMEA <NMEA filename>\n" 183 " serialHeightNMEA <Height>\n" 184 " serialHeightNMEASampling <Sampling [sec]>\n" 185 185 "\n" 186 186 "Outages Panel keys:\n" 187 " --obsRate <Observation rate, 0.1 Hz|0.2 Hz|0.5 Hz|1 Hz|5 Hz> \n"188 " --adviseFail <Failure threshold [min]>\n"189 " --adviseReco <Recovery threshold [min]>\n"190 " --adviseScript <Script, full path>\n"187 " obsRate <Observation rate, 0.1 Hz|0.2 Hz|0.5 Hz|1 Hz|5 Hz> \n" 188 " adviseFail <Failure threshold [min]>\n" 189 " adviseReco <Recovery threshold [min]>\n" 190 " adviseScript <Script, full path>\n" 191 191 "\n" 192 192 "Miscellaneous Panel keys:\n" 193 " --miscMount <Mountpoint>\n"194 " --perfIntr <Log latency, interval>\n"195 " --scanRTCM <Scan for RTCM message numbers, 0=no, 2=yes>\n"196 " --miscPort <Port output>\n"193 " miscMount <Mountpoint>\n" 194 " perfIntr <Log latency, interval>\n" 195 " scanRTCM <Scan for RTCM message numbers, 0=no, 2=yes>\n" 196 " miscPort <Port output>\n" 197 197 "\n" 198 198 "PPP Client Panel 1 keys:\n" 199 " --dataSource <Data source, Real-Time Streams| RINEX Files>\n"200 " --rinexObs <RINEX observation file>\n"201 " --rinexNav <RINEX navigation file>\n"202 " --corrMount <Corrections mountpoint>\n"203 " --corrFile <Corrections file>\n"204 " --crdFile <Coordinates file>\n"205 " --logFilePPP <PPP logfile>\n"206 " --antexFile <ANTEX file>\n"207 " --nmeaFile <NMEA output file>\n"208 " --snxtroFile <SINEX troposphere output filename>\n"209 " --snxtroSampl <SINEX troposphere sampling rate [sec]>\n"199 " dataSource <Data source, Real-Time Streams| RINEX Files>\n" 200 " rinexObs <RINEX observation file>\n" 201 " rinexNav <RINEX navigation file>\n" 202 " corrMount <Corrections mountpoint>\n" 203 " corrFile <Corrections file>\n" 204 " crdFile <Coordinates file>\n" 205 " logFilePPP <PPP logfile>\n" 206 " antexFile <ANTEX file>\n" 207 " nmeaFile <NMEA output file>\n" 208 " snxtroFile <SINEX troposphere output filename>\n" 209 " snxtroSampl <SINEX troposphere sampling rate [sec]>\n" 210 210 "\n" 211 211 "PPP Client Panel 2 keys:\n" 212 " --staTable <Stations table>\n"212 " staTable <Stations table>\n" 213 213 "\n" 214 214 "PPP Client Panel 3 keys:\n" 215 " --lcGPS <Select linear combination from GPS code or phase data>\n"216 " --lcGLONASS <Select linear combination from GLONASS code or phase data>\n"217 " --lcGalileo <Select linear combination from Galileo code or phase data>\n"218 " --lcBDS <Select linear combination from BDS code or phase data>\n"219 " --sigmaC1 <Sigma for code observations [m]>\n"220 " --sigmaL1 <Sigma for phase observations [m]>\n"221 " --maxResC1 <Maximal residuum for code observations [m]>\n"222 " --maxResL1 <Maximal residuum for phase observations [m]>\n"223 " --eleWgtCode <Elevation dependent waiting of code observations, 0=no, 2=yes>\n"224 " --eleWgtPhase <Elevation dependent waiting of phase observations, 0=no, 2=yes>\n"225 " --minObs <Minimum number of observations>\n"226 " --minEle <Minimum elevation [deg]>\n"227 " --corrWaitTime <Wait for clock corrections [sec]>\n"228 " --seedingTime <Seeding time span for Quick Start [sec]>\n"215 " lcGPS <Select linear combination from GPS code or phase data>\n" 216 " lcGLONASS <Select linear combination from GLONASS code or phase data>\n" 217 " lcGalileo <Select linear combination from Galileo code or phase data>\n" 218 " lcBDS <Select linear combination from BDS code or phase data>\n" 219 " sigmaC1 <Sigma for code observations [m]>\n" 220 " sigmaL1 <Sigma for phase observations [m]>\n" 221 " maxResC1 <Maximal residuum for code observations [m]>\n" 222 " maxResL1 <Maximal residuum for phase observations [m]>\n" 223 " eleWgtCode <Elevation dependent waiting of code observations, 0=no, 2=yes>\n" 224 " eleWgtPhase <Elevation dependent waiting of phase observations, 0=no, 2=yes>\n" 225 " minObs <Minimum number of observations>\n" 226 " minEle <Minimum elevation [deg]>\n" 227 " corrWaitTime <Wait for clock corrections [sec]>\n" 228 " seedingTime <Seeding time span for Quick Start [sec]>\n" 229 229 "\n" 230 230 "PPP Client Panel 4 keys:\n" 231 " --plotCoordinates <Mountpoint for time series plot>\n"232 " --audioResponse <Audio response threshold [m]>\n"233 " --useOpenStreetMap <OSM track map, true|false>\n"234 " --useGoogleMap <Google track map, true|false>\n"235 " --mapWinDotSize <Size of dots on map>\n"236 " --mapWinDotColor <Color of dots and cross hair on map, red|yellow>\n"237 " --mapSpeedSlider <Offline processing speed for mapping, 1-100>\n"231 " plotCoordinates <Mountpoint for time series plot>\n" 232 " audioResponse <Audio response threshold [m]>\n" 233 " useOpenStreetMap <OSM track map, true|false>\n" 234 " useGoogleMap <Google track map, true|false>\n" 235 " mapWinDotSize <Size of dots on map>\n" 236 " mapWinDotColor <Color of dots and cross hair on map, red|yellow>\n" 237 " mapSpeedSlider <Offline processing speed for mapping, 1-100>\n" 238 238 "\n" 239 239 "Combine Corrections Panel keys:\n" 240 " --combineStreams <Table of correction streams\n"241 " --cmbMethodFilter <Approach, Single-Epoch|Filter\n"242 " --cmbMaxres <Clock outlier threshold [m]\n"243 " --cmbSampl <Orbit and clock sampling [m]\n"244 " --cmbUseGlonass <Use GLONASS in combination, 0=no, 2=yes\n"240 " combineStreams <Table of correction streams\n" 241 " cmbMethodFilter <Approach, Single-Epoch|Filter\n" 242 " cmbMaxres <Clock outlier threshold [m]\n" 243 " cmbSampl <Orbit and clock sampling [m]\n" 244 " cmbUseGlonass <Use GLONASS in combination, 0=no, 2=yes\n" 245 245 "\n" 246 246 "Upload Corrections Panel keys:\n" 247 " --uploadMountpointsOut <Upload corrections table>\n"248 " --uploadIntr <File interval, length of SP3 and Clock RINEX files>\n"249 " --uploadSamplRtcmEphCorr <Orbit corrections sampling interval [sec]>\n"250 " --uploadSamplSp3 <SP3 file sampling [min]>\n"251 " --uploadSamplClkRnx <Clock RINEX file sampling [sec]>\n"247 " uploadMountpointsOut <Upload corrections table>\n" 248 " uploadIntr <File interval, length of SP3 and Clock RINEX files>\n" 249 " uploadSamplRtcmEphCorr <Orbit corrections sampling interval [sec]>\n" 250 " uploadSamplSp3 <SP3 file sampling [min]>\n" 251 " uploadSamplClkRnx <Clock RINEX file sampling [sec]>\n" 252 252 "\n" 253 253 "Custom Trafo keys:\n" 254 " --trafo_dx <Translation X [m]>\n"255 " --trafo_dy <Translation Y [m]>\n"256 " --trafo_dz <Translation Z [m]>\n"257 " --trafo_dxr <Translation change X [m/y]>\n"258 " --trafo_dyr <Translation change Y [m/y]>\n"259 " --trafo_dzr <Translation change Z [m/y]>\n"260 " --trafo_ox <Rotation X [as]>\n"261 " --trafo_oy <Rotation Y [as]>\n"262 " --trafo_oz <Rotation Z [as]>\n"263 " --trafo_oxr <Rotation change X [as/y]>\n"264 " --trafo_oyr <Rotation change Y [as/y]>\n"265 " --trafo_ozr <Rotation change Z [as/y]>\n"266 " --trafo_sc <Scale [10^-9]>\n"267 " --trafo_scr <Scale change [10^-9/y]>\n"268 " --trafo_t0 <Reference year [y]>\n"254 " trafo_dx <Translation X [m]>\n" 255 " trafo_dy <Translation Y [m]>\n" 256 " trafo_dz <Translation Z [m]>\n" 257 " trafo_dxr <Translation change X [m/y]>\n" 258 " trafo_dyr <Translation change Y [m/y]>\n" 259 " trafo_dzr <Translation change Z [m/y]>\n" 260 " trafo_ox <Rotation X [as]>\n" 261 " trafo_oy <Rotation Y [as]>\n" 262 " trafo_oz <Rotation Z [as]>\n" 263 " trafo_oxr <Rotation change X [as/y]>\n" 264 " trafo_oyr <Rotation change Y [as/y]>\n" 265 " trafo_ozr <Rotation change Z [as/y]>\n" 266 " trafo_sc <Scale [10^-9]>\n" 267 " trafo_scr <Scale change [10^-9/y]>\n" 268 " trafo_t0 <Reference year [y]>\n" 269 269 "\n" 270 270 "Upload Ephemeris Panel keys:\n" 271 " --uploadEphHost <Host>\n"272 " --uploadEphPort <Port>\n"273 " --uploadEphMountpoint <Mountpoint>\n"274 " --uploadEphPassword <Password>\n"275 " --uploadEphSample <Sampling interval [sec]>\n"271 " uploadEphHost <Host>\n" 272 " uploadEphPort <Port>\n" 273 " uploadEphMountpoint <Mountpoint>\n" 274 " uploadEphPassword <Password>\n" 275 " uploadEphSample <Sampling interval [sec]>\n" 276 276 "\n" 277 277 "Add Stream keys:\n" 278 " --mountPoints <Mountpoint list>\n" 279 " --ntripVersion <Ntrip Version, 1|2|2s|R|U>\n" 280 " --casterUrlList <Visited URLs>\n"; 278 " mountPoints <Mountpoint list>\n" 279 " ntripVersion <Ntrip Version, 1|2|2s|R|U>\n" 280 " casterUrlList <Visited URLs>\n" 281 "\n" 282 "Example:\n" 283 "bnc --conf BNC.bnc --key startTab 4 --key reqcAction Edit/Concatenate" 284 " --key reqcObsFile AGAR.15O --key reqcOutObsFile AGAR_X.15O" 285 " --key reqcRnxVersion 2 --key reqcSampling 30 --key reqcV2Priority CWPX_?\n"; 281 286 282 287 for (int ii = 1; ii < argc; ii++) {
Note:
See TracChangeset
for help on using the changeset viewer.
