Changeset 6949 in ntrip

Timestamp:

Jun 23, 2015, 2:58:03 PM (9 years ago)

Author:

weber

Message:

Documentation completed

File:

• trunk/BNC/src/bnchelp.html (modified) (8 diffs)

trunk/BNC/src/bnchelp.html

@@ -2596 +2596 @@
 </p>
 </p>
-Because the encoding process may put a significant load on the communication link between BNC and the real-time GNSS engine, it is recommended to run both programs on the same host. However, doing so is not compulsory.
+Because the stream delivery process may put a significant load on the communication link between BNC and the real-time GNSS engine, it is recommended to run both programs on the same host. However, doing so is not compulsory.
 </p>
 <p>
@@ -2679 +2679 @@
 
 <p><a name="upadd"><h4>3.15.1 Add, Delete Row - optional</h4></p>
-<p>Hit 'Add Row' button to add another row to the stream 'Upload Table' or hit the 'Delete' button to delete the highlighted row(s).
+<p>Hit 'Add Row' button to add a row to the stream 'Upload Table' or hit the 'Delete' button to delete the highlighted row(s).
 </p>
 <p>
@@ -2685 +2685 @@
 </p>
 
-<p><a name="uphost"><h4>3.15.2 Host, Port, Mountpoint, Password - mandatory if 'Upload Table' entries specified</h4></p>
-
-<p>Specify the domain name or IP number of an NTRIP Broadcaster for uploading the stream. Furthermore, specify the caster's listening IP port, an upload mountpoint and an upload password. Note that NTRIP Broadcasters are often configured to provide access on more than one port, usually port 80 and 2101. If you experience communication problems on port 80, you should try to use the alternative port(s).
+<p><a name="uphost"><h4>3.15.2 Host, Port, Mountpoint, Password - optional</h4></p>
+
+<p>Specify the domain name or IP number of an NTRIP Broadcaster for uploading the stream. Furthermore, specify the caster's listening IP port, an upload mountpoint and an upload password. Note that NTRIP Broadcasters are often configured to provide access through more than one port, usually ports 80 and 2101. If you experience communication problems on port 80, you should try to use the alternative port(s).
 </p>
 <p>
@@ -2845 +2845 @@
 
 <p>
-<u>DREF91:</u> 'Referenzkoordinaten für SAPOS, Empfehlungen der Projektgruppe SAPOS-Koordinatenmonitoring 2008', Personal communication with Peter Franke, BKG, Germany. The following 14 Helmert Transformation Parameters were introduced:
+<u>DREF91:</u> 'Referenzkoordinaten fuer SAPOS, Empfehlungen der Projektgruppe SAPOS-Koordinatenmonitoring 2008', Personal communication with Peter Franke, BKG, Germany. The following 14 Helmert Transformation Parameters were introduced:
 </p>
 <p>
@@ -2871 +2871 @@
 </p>
 
+<p><img src="IMG/screenshot38.png"/></p>
+<p><u>Figure 28:</u> Setting Custom Transformation Parameters window, example for 'ITRF2008->GDA94'.</p>
+
 <p><a name="upcom"><h4>3.15.4 Center of Mass - optional</h4></p>
 <p>
-BNC allows to either referring Broadcast Corrections to the satellite's Center of Mass (CoM) or to the satellite's Antenna Phase Center (APC). By default corrections refer to APC. Tick 'Center of Mass' to refer uploaded corrections to CoM.
+BNC allows to either refer Broadcast Corrections to the satellite's Center of Mass (CoM) or to the satellite's Antenna Phase Center (APC). By default corrections refer to APC. Tick 'Center of Mass' to refer uploaded corrections to CoM.
 </p>
 
@@ -2911 +2914 @@
 </p>
 
-<p><a name="upclksmpl"><h4>3.15.8 Sampling - mandatory if 'Upload Table' entries specified</h4></p>
+<p><a name="upclksmpl"><h4>3.15.8 Sampling</h4></p>
 <p>BNC requires an orbit corrections sampling interval for the stream to be uploaded and sampling intervals for SP3 and Clock RINEX files. The outgoing stream's clock correction sampling interval follows that of incoming corrections and is therefore nothing to be specified here.</p>
 
-<p><a name="upclkorb"><h4>3.15.8.1 Orbits - mandatory if 'Upload Table' entries specified</h4></p>
+<p><a name="upclkorb"><h4>3.15.8.1 Orbits (Orb) - mandatory if 'Upload Table' entries specified</h4></p>
 <p>Select the stream's orbit correction sampling interval in seconds. A value of 60 sec may be appropriate.</p>
 <p> A value of zero '0' tells BNC to upload all orbit correction samples coming in from the real-time GNSS engine along with the clock correction samples to produce combined orbit and clock corrections to Broadcast Ephemeris (1060 for GPS, 1066 for GLONASS).
@@ -2948 +2951 @@
 <p>Select the SP3 orbit file sampling interval in minutes. A value of 15 min may be appropriate. A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>
 
-<p><a name="upclkrnx"><h4>3.15.8.3 RINEX - mandatory if 'RNX File' is specified</h4></p>
+<p><a name="upclkrnx"><h4>3.15.8.3 RINEX (RNX) - mandatory if 'RNX File' is specified</h4></p>
 <p>Select the Clock RINEX file sampling interval in seconds. A value of 10 sec may be appropriate. A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>
 
@@ -3942 +3945 @@
 <tr><td>corrIntr=</td><td>Broadcast Corrections: Interval</td></tr>
 <tr><td>corrPort=</td><td>Broadcast Corrections: Port</td></tr>
-<tr><td>corrTime=</td><td>Broadcast Corrections: Wait for full corr epoch</td></tr>
 
 <tr><td>outPort=</td><td>Feed Engine: Port</td></tr>