Figure 7:Example for satellite availability plot.
@@ -675,5 +683,5 @@
Figure 7: Example for 'RINEX Editing Options' window.
+Figure 8: Example for 'RINEX Editing Options' window.
3.6.3 Input Files - mandatory if 'Action' is set
Figure 8: Example for RINEX file editing with BNC in Post Processing mode.
+Figure 9: Example for RINEX file editing with BNC in Post Processing mode.
@@ -696,5 +704,5 @@
Figure 9: Example for RINEX quality check output with BNC in Post Processing mode. A multipath and a signal-to-noise ratio analysis are presented in terms of a sky plot.
+Figure 10: Example for RINEX quality check output with BNC in Post Processing mode. A multipath and a signal-to-noise ratio analysis are presented in terms of a sky plot.
3.6.5 Directory for Plots - optional if 'Action' is set
The following Linux command line produces RINEX QC multipath (see Estey and Meertens 1999) and signal-to-noise ratio plots offline in 'no window' mode and saves them in directory '/home/user'. Introducing a dummy configuration file /dev/null makes sure that no configuration options previously saved on disc are used:
+The following Linux command line produces RINEX QC plots (see Estey and Meertens 1999) offline in 'no window' mode and saves them in directory '/home/user'. Introducing a dummy configuration file /dev/null makes sure that no configuration options previously saved on disc are used:
/home/user/bnc --conf /dev/null --key reqcAction Analyze --key reqcObsFile CUT02070.12O --key reqcNavFile BRDC2070.12P --key reqcOutLogFile CUT0.txt --key reqcPlotDir /home/user --nw
-The following Linux command line produces the same RINEX QC multipath and signal-to-noise ratio plots in interactive autoStart mode:
+The following Linux command line produces the same RINEX QC plots in interactive autoStart mode:
/home/user/bnc --conf /dev/null --key reqcAction Analyze --key reqcObsFile CUT02070.12O --key reqcNavFile BRDC2070.12P --key reqcOutLogFile CUT0.txt --key --key startTab 4 --key autoStart 2 @@ -1065,5 +1073,5 @@
Figure 10: Synchronized BNC output via IP port to feed a GNSS real-time engine.
+Figure 11: Synchronized BNC output via IP port to feed a GNSS real-time engine.
@@ -1103,5 +1111,5 @@
Figure 11: BNC pulling a VRS stream to feed a serial connected RTK rover.
+Figure 12: BNC pulling a VRS stream to feed a serial connected RTK rover.
@@ -1254,5 +1262,5 @@
Figure 12: RTCM message numbers, latencies and observation types.
+Figure 13: RTCM message numbers, latencies and observation types.
@@ -1333,8 +1341,8 @@
Figure 13: Precise Point Positioning with BNC, PPP Panel 1.
+Figure 14: Precise Point Positioning with BNC, PPP Panel 1.
Figure 14: Precise Point Positioning with BNC, PPP Panel 2.
+Figure 15: Precise Point Positioning with BNC, PPP Panel 2.
@@ -1623,8 +1631,8 @@
Figure 15: BNC in 'Quick-Start' mode (PPP, Panel 1)
+Figure 16: BNC in 'Quick-Start' mode (PPP, Panel 1)
Figure 16: BNC in 'Quick-Start' mode (PPP, Panel 2)
+Figure 17: BNC in 'Quick-Start' mode (PPP, Panel 2)
3.12.7.8 Maximal Solution Gap - optional if Quick-Start is set
Figure 17: BNC combining Broadcast Correction streams.
+Figure 18: BNC combining Broadcast Correction streams.
Figure 18: BNC uploading the combined Broadcast Corrections stream.
+Figure 19: BNC uploading the combined Broadcast Corrections stream.
Figure 19: 'INTERNAL' PPP with BNC using combined Broadcast Corrections stream.
+Figure 20: 'INTERNAL' PPP with BNC using combined Broadcast Corrections stream.
3.13.1.2 Method - mandatory if 'Combine Corrections' table is populated
Figure 20: Producing Broadcast Corrections from incoming precise orbits and clocks and uploading them to an NTRIP Broadcaster.
+Figure 21: Producing Broadcast Corrections from incoming precise orbits and clocks and uploading them to an NTRIP Broadcaster.
@@ -2135,5 +2143,5 @@
Figure 21: Producing a Broadcast Ephemeris stream from navigation messages of globally distributed RTCM streams and uploading them in RTCM Version 3 format to an NTRIP Broadcaster.
+Figure 22: Producing a Broadcast Ephemeris stream from navigation messages of globally distributed RTCM streams and uploading them in RTCM Version 3 format to an NTRIP Broadcaster.
@@ -2202,5 +2210,5 @@
Figure 22: Bandwidth consumption of incoming streams.
+Figure 23: Bandwidth consumption of incoming streams.
@@ -2210,5 +2218,5 @@
Figure 23: Latency of incoming streams.
+Figure 24: Latency of incoming streams.
@@ -2218,5 +2226,5 @@
Figure 24: Time series plot of PPP session.
+Figure 25: Time series plot of PPP session.
@@ -2226,5 +2234,5 @@
Figure 25: Steam input communication links.
+Figure 26: Steam input communication links.
3.18.1 Add Stream - Coming from Caster
Figure 26: Casters table.
+Figure 27: Casters table.
3.18.1.3 User and Password - mandatory for protected streams
Figure 27: Broadcaster source-table.
+Figure 28: Broadcaster source-table.
Button 'Map' leads to the presentation of a map showing the distribution of streams offered through the downloaded source-table.
@@ -2295,5 +2303,5 @@
Figure 28: Stream distribution map derived from NTRIP Broadcaster source-table.
+Figure 29: Stream distribution map derived from NTRIP Broadcaster source-table.
3.18.2 Add Stream - Coming from TCP/IP Port
Figure 29: BNC setup for pulling a stream via serial port.
+Figure 30: BNC setup for pulling a stream via serial port.
@@ -2401,6 +2409,5 @@ least a virtual X-Server such as 'Xvfb' is installed and the '-display' option is used. The following is an example shell script to execute BNC in batch mode -for producing multipath and signal-to-noise ratio plots from RINEX files. It -could be used via 'crontab': +for producing QC plots from RINEX files. It could be used via 'crontab':@@ -2600,5 +2607,5 @@Aug 2012 Version 2.7 -[Bug] Bug in L5 decoding fixed +
[Bug] Bug in on-the-fly configuration fixed
[Add] Clock RINEX file header extended
[Add] Decoding/converting COMPASS and QZSS added
[Add] Work on RINEX v2 and v3 quality check started
[Mod] Source code completely re-arranged
[Add] QWT and QWTPOLAR graphics libraries added
[Add] RINEX v2 and v3 quality check through multipath analysis and sky plot
[Add] Signal-to-noise sky plot
[Bug] Short periodic outages in PPP time series when operated when 'Sync Corr' set to zero
|Add] Log observation types contained in RTCM Version 3 MSM streams
[Add] Reading RINEX v3 observation type header records from RINEX skeleton files
[Add] Logfile for RINEX file editing and concatenation
[Add] Save PNG plot files on disk
[Add] Version 2.7 published[Bug] Bug in L5 decoding fixed
[Bug] Bug in on-the-fly configuration fixed
[Add] Clock RINEX file header extended
[Add] Decoding/converting COMPASS and QZSS added
[Add] Work on RINEX v2 and v3 quality check started
[Mod] Source code completely re-arranged
[Add] QWT and QWTPOLAR graphics libraries added
[Add] RINEX QC through multipath analysis sky plot
[Add] RINEX QC through signal-to-noise sky plot
[Add] RINEX QC through satellite availability plot
[Bug] Short periodic outages in PPP time series when operated when 'Sync Corr' set to zero
|Add] Log observation types contained in RTCM Version 3 MSM streams
[Add] Reading RINEX v3 observation type header records from RINEX skeleton files
[Add] Logfile for RINEX file editing and concatenation
[Add] Save PNG plot files on disk
[Add] Version 2.7 published