Figure: BNC in 'Quick-Start' mode
- --PPP time series of North (red), East(green) and Up (blue) coordinate components will be plotted in the 'PPP Plot' tab when this option is ticked. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated XYZ coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes. -
--Note that a PPP time series makes only sense for a stationary operated receiver. -
- - --BNC allows to output results from Precise Point Positioning in NMEA format. +
3.11.4.4 Max Solution Gap - optional if XYZ is set
+Specify a 'Maximum Solution Gap' in seconds. Should the time span between two consecutive positioning solutions exceed this limit, the algorithm returns into the Quick-Start mode and fixes the introduced reference coordinate for the specified Quick-Start period. A value of '120' seconds could be an appropriate choice. +
+This option makes only sense for a stationary operated receiver where solution convergence can be enforced because the (approximate) receiver position is known. Default is an empty option field, meaning that you don't want BNC to return into the Quick-Start mode after failures caused i.e. by longer lasting outages. +
+ + ++BNC allows to output results from Precise Point Positioning in NMEA format. It can also plot a time series of North, East and UP displacements of coordinate components.
@@ -1278,4 +1278,12 @@NASA's 'World Wind' software (see http://worldwindcentral.com/wiki/NASA_World_Wind_Download) can be used for real-time visualization of positions provided through BNC's NMEA IP output port. You need the 'GPS Tracker' plug-in available from http://worldwindcentral.com/wiki/GPS_Tracker for that. The 'Word Wind' is not meant for showing centimeter level details. +
+ + ++PPP time series of North (red), East(green) and Up (blue) coordinate components will be plotted in the 'PPP Plot' tab when this option is ticked. Values will be either referred to an XYZ reference coordinate (if specified) or referred to the first estimated XYZ coordinate. The sliding PPP time series window will cover the period of the latest 5 minutes. +
++Note that a PPP time series makes only sense for a stationary operated receiver.