Changeset 2103 in ntrip


Ignore:
Timestamp:
Dec 7, 2009, 9:54:52 PM (14 years ago)
Author:
weber
Message:

* empty log message *

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/BNC/bncwindow.cpp

    r2094 r2103  
    385385  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p>"));
    386386  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meter for your VRS to simulate an inital NMEA-GGA message.</p><p>The setting of this option is ignored in case of streams coming from physical reference stations.</p>"));
    387   _pppMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint if you want BNC to derive coordinates for the affected receiver position through a PPP solution.</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris. Pulling in addition a stream carrying Broadcast Ephemeris messages in short repetition rates is suggested.</p>"));
     387  _pppMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint if you want BNC to derive coordinates for the affected receiver position through a PPP solution.</p><p>Note that PPP in BNC requires to also pull a stream carrying RTCM Version 3 satellite orbit and clock corrections to Broadcast Ephemeris.</p><p>Pulling in addition a third stream carrying Broadcast Ephemeris messages in high repetition rate is suggested if such messages are comeing from the receiver only in low repetition rate or even not at all.</p>"));
    388388  _pppStaticCheckBox->setWhatsThis(tr("<p>By default BNC considers the rover receiver as mobile.</p><p>Tick 'Static' to consider a static observation sitatuion and adapt appropriate filter characteristics for that.</p>"));
    389389  _pppUsePhaseCheckBox->setWhatsThis(tr("<p>By default BNC applies a PPP solution using an ionosphere free P3 linear combination of code observations.</p><p>Tick 'Use phase obs' for an ionosphere free L3 linear combination of phase observations.</p>"));
Note: See TracChangeset for help on using the changeset viewer.