Index: trunk/BNC/src/bnchelp.html
===================================================================
--- trunk/BNC/src/bnchelp.html (revision 10660)
+++ trunk/BNC/src/bnchelp.html (revision 10661)
@@ -6344,8 +6344,8 @@
SP3 Comparison Panel keys:
- sp3CompFile {SP3 input files, full path [character string, comma separated list in quotation marks]}
- sp3CompExclude {Satellite exclusion list [character string, comma separated list in quotation marks, example: G04,G31,R]}
- sp3CompOutLogFile {Output logfile, full path [character string]}
- sp3SummaryOnly {Output only summary of logfile [integer number: 0=no,2=yes]}
+ sp3CompFile {SP3 input files, full path [character string, comma separated list in quotation marks]}
+ sp3CompExclude {Satellite exclusion list [character string, comma separated list in quotation marks, example: G04,G31,R]}
+ sp3CompOutLogFile {Output logfile, full path [character string]}
+ sp3CompSummaryOnly {Output only summary of logfile [integer number: 0=no,2=yes]}
Broadcast Corrections Panel keys:
@@ -6398,17 +6398,18 @@
PPP/ionoMount {VTEC mountpoint, [char string]}
PPP/ionoFile {VTEC file, full path [char string]}
- PPP/nmeaPath {Directory for NMEA output files [character string]}
- PPP/snxtroPath {Directory for SINEX troposphere output files [character string]}
- PPP/snxtroIntr {SINEX troposphere file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}
- PPP/snxtroSampl {SINEX troposphere file sampling rate [character string: 1 sec|5 sec|10 sec|30 sec|60 sec|300 sec]}
- PPP/snxtroAc {SINEX troposphere Analysis Center [3-char string]}
- PPP/snxtroSol {SINEX troposphere solution ID [1-char]}
+ PPP/nmeaPath {Directory for NMEA output files [character string]}
+ PPP/snxtroPath {Directory for SINEX troposphere output files [character string]}
+ PPP/snxtroIntr {SINEX troposphere file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}
+ PPP/snxtroSampl {SINEX troposphere file sampling rate [character string: 1 sec|5 sec|10 sec|30 sec|60 sec|300 sec]}
+ PPP/snxtroAc {SINEX troposphere Analysis Center [3-char string]}
+ PPP/snxtroSolId {SINEX troposphere solution ID [1-char]}
+ PPP/snxtroSolType {SINEX troposphere solution type, e.g. RTS, UNK, .. [3-char]}
+ PPP/snxtroCampId {SINEX troposphere campaign ID, e.g. DEM, TST, OPS, .. [3-char]}
PPP Client Panel 2 keys:
- PPP/lcGPS {Select observations from GPS code and/or phase data [character string; Pi&Li|Pi|Li|no]}
- PPP/lcGLONASS {Select observations from GLONASS code and/or phase data [character string: Pi&Li|Pi|Li|no]}
- PPP/lcGalileo {Select observations from Galileo code and/or phase data [character string: Pi&Li|Pi|Li|no]}
- PPP/lcBDS {Select observations from BDS code and/or phase data [character string: Pi&Li|Pi|Li|no]}
- PPP/modelObs {select observation model [character string: Uncombined PPP|Ionosphere-free PPP|DCM with Code Biases|DCM with Phase Biases]}
+ PPP/lcGPS {Select the kind of linear combination from GPS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}
+ PPP/lcGLONASS {Select the kind of linear combination from GLONASS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}
+ PPP/lcGalileo {Select the kind of linear combination from Galileo code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}
+ PPP/lcBDS {Select the kind of linear combination from BDS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}
PPP/sigmaC1 {Sigma for code observations in meters [floating-point number]}
PPP/sigmaL1 {Sigma for phase observations in meters [floating-point number]}
@@ -6421,5 +6422,5 @@
PPP/corrWaitTime {Wait for clock corrections [integer number of seconds: 0-20]}
PPP/seedingTime {Seeding time span for Quick Start [integer number of seconds]}
- PPP/pseudoOb {Select pseudo observations [character string: no|Ionosphere]}
+ PPP/constraints {Specify, whether ionospheric constraints in form of pseudo-observations shall be added [character string: no|Ionosphere: pseudo-obs]}
PPP/sigmaGIM {Sigma for GIM pseudo observations in meters [floating-point number]}
PPP/maxResGIM {Maximal residuum for GIM pseudo observations in meters [floating-point number]}
@@ -6427,6 +6428,6 @@
PPP Client Panel 3 keys:
PPP/staTable {Station specifications table [character string, semicolon separated list, each element in quotaion marks, example:
- "WTZR00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:12&CWPSLX R:12&CP E:1&CBX E:5&QIX C:26&IQX;
- FFMJ00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:12&CWPSLX R:12&CP E:1&CBX E:5&QIX C:26&IQX"]}
+ "WTZR00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:1&C G:2&W R:1&C R:2&P E:1&C E:5&Q C:26&I;
+ FFMJ00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:12&W R:12&P E:15&X C:26&I"]}
PPP Client Panel 4 keys:
@@ -6439,10 +6440,11 @@
Combine Corrections Panel keys:
cmbStreams {Correction streams table [character string, semicolon separated list, each element in quotation marks, example:
- "SSRA00ESA0 ESA 1.0;SSRA00BKG BKG 1.0"]}
+ "SSRA00ESA0 ESA 1.0;SSRA00BKG BKG 1.0"]}
cmbMethodFilter {Combination approach [character string: Single-Epoch|Filter]}
cmbBsxFile {SINEX Bias file, full path [char string]}
- cmbMaxres {Clock outlier residuum threshold in meters [floating-point number]
- cmbMaxdisplacement {Maximal orbit displacement from the mean of corrections for a satellite [floating-point number]
- cmbSampl {Clock sampling rate [integer number of seconds: 0|10|20|30|40|50|60]}
+ cmbMaxres {Clock outlier residuum threshold in meters [floating-point number]}
+ cmbMaxdisplacement {Maximal orbit displacement from the mean of corrections for a satellite [floating-point number]}
+ cmbSampl {Clock sampling rate [integer number of seconds: 1 sec|2 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}
+ cmbLogpath {Directory for Combination log files [character string]}
cmbGps {GPS correction usage [integer number: 0=no,2=yes]}
cmbGlo {GLONASS correction usage [integer number: 0=no,2=yes]}
@@ -6458,8 +6460,8 @@
euref-ip.net,2101,SSRA02IGS1_EUREF,2,usr,pass,ETRF2000,RTCM-SSR,0,,,,258,2,0"]}
uploadIntr {Length of SP3, Clock RINEX and Bias SINEX file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}
- uploadSamplRtcmEphCorr {Orbit corrections stream sampling rate [integer number of seconds: 0|5|10|15|20|25|30|35|40|45|50|55|60]}
+ uploadSamplRtcmEphCorr {Orbit corrections stream sampling rate [integer number of seconds: 0 sec|1 sec|2 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}
uploadSamplSp3 {SP3 file sampling rate [integer number of seconds: 0 sec|30 sec|60 sec|300 sec|900 sec]}
- uploadSamplClkRnx {Clock RINEX file sampling rate [integer number of seconds: 0|5|10|15|20|25|30|35|40|45|50|55|60]}
- uploadSamplBiaSnx {SINEX Bias file sampling rate [integer number of seconds: 0|5|10|15|20|25|30|35|40|45|50|55|60]}
+ uploadSamplClkRnx {Clock RINEX file sampling rate [integer number of seconds: 0 sec|5 sec|10 sec|15 sec|20 sec|25 sec|30 sec|35 sec|40 sec|45 sec|50 sec|55 sec|60 sec]}
+ uploadSamplBiaSnx {SINEX Bias file sampling rate [integer number of seconds: 0 sec|5 sec|10 sec|15 sec|20 sec|25 sec|30 sec|35 sec|40 sec|45 sec|50 sec|55 sec|60 sec]}
Custom Trafo keys:
@@ -6511,5 +6513,6 @@
(7) bnc --conf /dev/null --key startTab 15 --key cmbStreams "SSRA00BKG1 BKG 1.0;SSRA00CNE1 CNES 1.0"
(8) bnc --conf /dev/null --key startTab 16 --key uploadMountpointsOut "products.igs-ip.net,2101,SSRC00BKG1,2,usr,pass,IGS20,RTCM-SSR,2,/Users/userName/BKG0MGXRTS${V3PROD}.SP3,,,33,3,2;euref-ip.net,443,SSRA00BKG1_EUREF,2s,usr,pass,ETRF2000,IGS-SSR,0,,,,33,5,5"
-(9) bnc --conf /dev/null --key startTab 13 --key PPP/dataSource "Real-Time Streams" --key PPP/staTable "FFMJ00DEU1,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7777,G:12&CWPSLX R:12&CP E:1&CBX E:5&QIX C:26&IQX;CUT000AUS0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7778,G:12&CWPSLX R:12&CP E:1&CBX E:5&QIX C:26&IQX"
+(9) bnc --conf /dev/null --key startTab 13 --key PPP/dataSource "Real-Time Streams" --key PPP/staTable "FFMJ00DEU1,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7777,G:12&W R:12&P E:1&C E:5&Q C:26&I;CUT000AUS0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7778,G:1&C G:2&W R:12&P E:15&X C:26&I"
+
Index: trunk/BNC/src/bncmain.cpp
===================================================================
--- trunk/BNC/src/bncmain.cpp (revision 10660)
+++ trunk/BNC/src/bncmain.cpp (revision 10661)
@@ -64,34 +64,34 @@
void catch_SIGINT(int) {
- cout << "BNC Interrupted by Ctrl-C" << endl;
- BNC_CORE->sigintReceived = 1;
- BNC_CORE->stopPPP();
- BNC_CORE->stopCombination();
+ cout << "BNC Interrupted by Ctrl-C" << endl;
+ BNC_CORE->sigintReceived = 1;
+ BNC_CORE->stopPPP();
+ BNC_CORE->stopCombination();
#ifndef WIN32
- sleep(2);
+ sleep(2);
#else
- Sleep(2000);
-#endif
- ::exit(0);
+ Sleep(2000);
+#endif
+ ::exit(0);
}
void catch_SIGTERM(int) {
- cout << "BNC Terminated" << endl;
- BNC_CORE->sigintReceived = 1;
- BNC_CORE->stopPPP();
- BNC_CORE->stopCombination();
+ cout << "BNC Terminated" << endl;
+ BNC_CORE->sigintReceived = 1;
+ BNC_CORE->stopPPP();
+ BNC_CORE->stopCombination();
#ifndef WIN32
- sleep(2);
+ sleep(2);
#else
- Sleep(2000);
-#endif
- ::exit(0);
+ Sleep(2000);
+#endif
+ ::exit(0);
}
void catch_SIGHUP(int) {
- cout << "BNC received SIGHUP signal: reload configuration" << endl;
- bncSettings settings;
- settings.reRead();
- BNC_CORE->caster()->readMountPoints();
+ cout << "BNC received SIGHUP signal: reload configuration" << endl;
+ bncSettings settings;
+ settings.reRead();
+ BNC_CORE->caster()->readMountPoints();
}
@@ -100,322 +100,322 @@
int main(int argc, char* argv[]) {
- bool interactive = true;
+ bool interactive = true;
#ifdef WIN32
- bool displaySet = true;
+ bool displaySet = true;
#else
- bool displaySet = false;
-#endif
- QByteArray rawFileName;
- QString confFileName;
-
- bncWindow* bncWin = 0;
- t_reqcEdit* reqcEdit = 0;
- t_reqcAnalyze* reqcAnalyze = 0;
- t_sp3Comp* sp3Comp = 0;
- bncEphUploadCaster* casterEph = 0;
- bncCaster* caster = 0;
- bncRawFile* rawFile = 0;
- bncGetThread* getThread = 0;
-
- QByteArray printHelp =
- "Usage:\n"
- " bnc --help (MS Windows: bnc.exe --help | more)\n"
- " --nw\n"
- " --version (MS Windows: bnc.exe --version | more)\n"
- " --display {name}\n"
- " --conf {confFileName}\n"
- " --file {rawFileName}\n"
- " --key {keyName} {keyValue}\n"
- "\n"
- "Network Panel keys:\n"
- " proxyHost {Proxy host, name or IP address [character string]}\n"
- " proxyPort {Proxy port [integer number]}\n"
- " sslCaCertPath {Full path to SSL certificates [character string]}\n"
- " sslClientCertPath {Full path to client SSL certificates [character string]}\n"
- " sslIgnoreErrors {Ignore SSL authorization errors [integer number: 0=no,2=yes]}\n"
- "\n"
- "General Panel keys:\n"
- " logFile {Logfile, full path [character string]}\n"
- " rnxAppend {Append files [integer number: 0=no,2=yes]}\n"
- " onTheFlyInterval {Configuration reload interval [character string: no|1 day|1 hour|5 min|1 min]}\n"
- " autoStart {Auto start [integer number: 0=no,2=yes]}\n"
- " rawOutFile {Raw output file, full path [character string]}\n"
- "\n"
- "RINEX Observations Panel keys:\n"
- " rnxPath {Directory for RINEX files [character string]}\n"
- " rnxIntr {File interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
- " rnxSampl {File sampling rate [character string: 0.1 sec|1 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
- " rnxSkel {RINEX skeleton file extension [character string: skl|SKL]}\n"
- " rnxSkelPath {Directory for local skeleton files [character string]}\n"
- " rnxOnlyWithSKL {Using RINEX skeleton file is mandatory [integer number: 0=no,2=yes]}\n"
- " rnxScript {File upload script, full path [character string]}\n"
- " rnxVersion {Specifies the RINEX version of the file contents [integer number: 2|3|4]}\n"
- " rnxV2Priority {Priority of signal attributes for RINEX version 2 [character string, list separated by blank character,\n"
- " example: G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:18&DPX I:ABCX S:1&C S:5&IQX]}\n"
- "\n"
- "RINEX Ephemeris Panel keys:\n"
- " ephPath {Directory [character string]}\n"
- " ephIntr {File interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
- " ephOutPort {Output port [integer number]}\n"
- " ephVersion {Specifies the RINEX version of the file contents [integer number: 2|3|4]}\n"
- "\n"
- "RINEX Editing and QC Panel keys:\n"
- " reqcAction {Action specification [character string: Blank|Edit/Concatenate|Analyze]}\n"
- " reqcObsFile {Input observations file(s), full path [character string, comma separated list in quotation marks]}\n"
- " reqcNavFile {Input navigation file(s), full path [character string, comma separated list in quotation marks]}\n"
- " reqcOutObsFile {Output observations file, full path [character string]}\n"
- " reqcOutNavFile {Output navigation file, full path [character string]}\n"
- " reqcOutLogFile {Output logfile, full path [character string]}\n"
- " reqcLogSummaryOnly {Output only summary of logfile [integer number: 0=no,2=yes]}\n"
- " reqcSkyPlotSignals {Observation signals [character string, list separated by blank character,\n"
- " example: G:1&2&5 R:1&2&3 E:1&7 C:2&6 J:1&2 I:5&9 S:1&5]}\n"
- " reqcPlotDir {QC plots directory [character string]}\n"
- " reqcRnxVersion {RINEX version [integer number: 2|3|4]}\n"
- " reqcSampling {RINEX output file sampling rate [character string: 0.1 sec|1 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
- " reqcV2Priority {Version 2 priority of signal attributes [character string, list separated by blank character,\n"
- " example: G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:18&DPX I:ABCX S:1&C S:5&IQX]}\n"
- " reqcStartDateTime {Start time [character string, example: 1967-11-02T00:00:00]}\n"
- " reqcEndDateTime {Stop time [character string, example: 2099-01-01T00:00:00]}\n"
- " reqcRunBy {Operators name [character string]}\n"
- " reqcUseObsTypes {Use observation types [character string, list separated by blank character, example: G:C1C G:L1C R:C1C RC1P]}\n"
- " reqcComment {Additional comments [character string]}\n"
- " reqcOldMarkerName {Old marker name [character string]}\n"
- " reqcNewMarkerName {New marker name [character string]}\n"
- " reqcOldAntennaName {Old antenna name [character string]}\n"
- " reqcNewAntennaName {New antenna name [character string]}\n"
- " reqcOldAntennaNumber {Old antenna number [character string]}\n"
- " reqcNewAntennaNumber {New antenna number [character string]}\n"
- " reqcOldAntennadN {Old north eccentricity [character string]}\n"
- " reqcNewAntennadN {New north eccentricity [character string]}\n"
- " reqcOldAntennadE {Old east eccentricity [character string]}\n"
- " reqcNewAntennadE {New east eccentricity [character string]}\n"
- " reqcOldAntennadU {Old up eccentricity [character string]}\n"
- " reqcNewAntennadU {New up eccentricity [character string]}\n"
- " reqcOldReceiverName {Old receiver name [character string]}\n"
- " reqcNewReceiverName {New receiver name [character string]}\n"
- " reqcOldReceiverNumber {Old receiver number [character string]}\n"
- " reqcNewReceiverNumber {New receiver number [character string]}\n"
- "\n"
- "SP3 Comparison Panel keys:\n"
- " sp3CompFile {SP3 input files, full path [character string, comma separated list in quotation marks]}\n"
- " sp3CompExclude {Satellite exclusion list [character string, comma separated list in quotation marks, example: G04,G31,R]}\n"
- " sp3CompOutLogFile {Output logfile, full path [character string]}\n"
- " sp3CompSummaryOnly {Output only summary of logfile [integer number: 0=no,2=yes]}\n"
- "\n"
- "Broadcast Corrections Panel keys:\n"
- " corrPath {Directory for saving files in ASCII format [character string]}\n"
- " corrIntr {File interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
- " corrPort {Output port [integer number]}\n"
- "\n"
- "Feed Engine Panel keys:\n"
- " outPort {Output port, synchronized [integer number]}\n"
- " outWait {Wait for full observation epoch [integer number of seconds: 1-30]}\n"
- " outSampl {Sampling rate [character string: 0.1 sec|1 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
- " outFile {Output file, full path [character string]}\n"
- " outUPort {Output port, unsynchronized [integer number]}\n"
- "\n"
- "Serial Output Panel:\n"
- " serialMountPoint {Mountpoint [character string]}\n"
- " serialPortName {Port name [character string]}\n"
- " serialBaudRate {Baud rate [integer number: 110|300|600|1200|2400|4800|9600|19200|38400|57600|115200]}\n"
- " serialFlowControl {Flow control [character string: OFF|XONXOFF|HARDWARE}\n"
- " serialDataBits {Data bits [integer number: 5|6|7|8]}\n"
- " serialParity {Parity [character string: NONE|ODD|EVEN|SPACE]}\n"
- " serialStopBits {Stop bits [integer number: 1|2]}\n"
- " serialAutoNMEA {NMEA specification [character string: no|Auto|Manual GPGGA|Manual GNGGA]}\n"
- " serialFileNMEA {NMEA filename, full path [character string]}\n"
- " serialHeightNMEA {Height [floating-point number]}\n"
- " serialHeightNMEASampling {Sampling rate [integer number of seconds: 0|10|20|30|...|280|290|300]}\n"
- "\n"
- "Outages Panel keys:\n"
- " adviseObsRate {Stream observation rate [character string: 0.1 Hz|0.2 Hz|0.5 Hz|1 Hz|5 Hz]} \n"
- " adviseFail {Failure threshold [integer number of minutes: 0-60]}\n"
- " adviseReco {Recovery threshold [integer number of minutes: 0-60]}\n"
- " adviseScript {Advisory script, full path [character string]}\n"
- "\n"
- "Miscellaneous Panel keys:\n"
- " miscMount {Mountpoint [character string]}\n"
- " miscIntr {Interval for logging latency [character string: Blank|2 sec|10 sec|1 min|5 min|15 min|1 hour|6 hours|1 day]}\n"
- " miscScanRTCM {Scan for RTCM message numbers [integer number: 0=no,2=yes]}\n"
- " miscPort {Output port [integer number]}\n"
- "\n"
- "PPP Client Panel 1 keys:\n"
- " PPP/dataSource {Data source [character string: Blank|Real-Time Streams|RINEX Files]}\n"
- " PPP/rinexObs {RINEX observation file, full path [character string]}\n"
- " PPP/rinexNav {RINEX navigation file, full path [character string]}\n"
- " PPP/corrMount {Corrections mountpoint [character string]}\n"
- " PPP/corrFile {Corrections file, full path [character string]}\n"
- " PPP/crdFile {Coordinates file, full path [character string]}\n"
- " PPP/logPath {Directory for PPP log files [character string]}\n"
- " PPP/antexFile {ANTEX file, full path [character string]}\n"
+ bool displaySet = false;
+#endif
+ QByteArray rawFileName;
+ QString confFileName;
+
+ bncWindow* bncWin = 0;
+ t_reqcEdit* reqcEdit = 0;
+ t_reqcAnalyze* reqcAnalyze = 0;
+ t_sp3Comp* sp3Comp = 0;
+ bncEphUploadCaster* casterEph = 0;
+ bncCaster* caster = 0;
+ bncRawFile* rawFile = 0;
+ bncGetThread* getThread = 0;
+
+ QByteArray printHelp =
+ "Usage:\n"
+ " bnc --help (MS Windows: bnc.exe --help | more)\n"
+ " --nw\n"
+ " --version (MS Windows: bnc.exe --version | more)\n"
+ " --display {name}\n"
+ " --conf {confFileName}\n"
+ " --file {rawFileName}\n"
+ " --key {keyName} {keyValue}\n"
+ "\n"
+ "Network Panel keys:\n"
+ " proxyHost {Proxy host, name or IP address [character string]}\n"
+ " proxyPort {Proxy port [integer number]}\n"
+ " sslCaCertPath {Full path to SSL certificates [character string]}\n"
+ " sslClientCertPath {Full path to client SSL certificates [character string]}\n"
+ " sslIgnoreErrors {Ignore SSL authorization errors [integer number: 0=no,2=yes]}\n"
+ "\n"
+ "General Panel keys:\n"
+ " logFile {Logfile, full path [character string]}\n"
+ " rnxAppend {Append files [integer number: 0=no,2=yes]}\n"
+ " onTheFlyInterval {Configuration reload interval [character string: no|1 day|1 hour|5 min|1 min]}\n"
+ " autoStart {Auto start [integer number: 0=no,2=yes]}\n"
+ " rawOutFile {Raw output file, full path [character string]}\n"
+ "\n"
+ "RINEX Observations Panel keys:\n"
+ " rnxPath {Directory for RINEX files [character string]}\n"
+ " rnxIntr {File interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
+ " rnxSampl {File sampling rate [character string: 0.1 sec|1 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
+ " rnxSkel {RINEX skeleton file extension [character string: skl|SKL]}\n"
+ " rnxSkelPath {Directory for local skeleton files [character string]}\n"
+ " rnxOnlyWithSKL {Using RINEX skeleton file is mandatory [integer number: 0=no,2=yes]}\n"
+ " rnxScript {File upload script, full path [character string]}\n"
+ " rnxVersion {Specifies the RINEX version of the file contents [integer number: 2|3|4]}\n"
+ " rnxV2Priority {Priority of signal attributes for RINEX version 2 [character string, list separated by blank character,\n"
+ " example: G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:18&DPX I:ABCX S:1&C S:5&IQX]}\n"
+ "\n"
+ "RINEX Ephemeris Panel keys:\n"
+ " ephPath {Directory [character string]}\n"
+ " ephIntr {File interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
+ " ephOutPort {Output port [integer number]}\n"
+ " ephVersion {Specifies the RINEX version of the file contents [integer number: 2|3|4]}\n"
+ "\n"
+ "RINEX Editing and QC Panel keys:\n"
+ " reqcAction {Action specification [character string: Blank|Edit/Concatenate|Analyze]}\n"
+ " reqcObsFile {Input observations file(s), full path [character string, comma separated list in quotation marks]}\n"
+ " reqcNavFile {Input navigation file(s), full path [character string, comma separated list in quotation marks]}\n"
+ " reqcOutObsFile {Output observations file, full path [character string]}\n"
+ " reqcOutNavFile {Output navigation file, full path [character string]}\n"
+ " reqcOutLogFile {Output logfile, full path [character string]}\n"
+ " reqcLogSummaryOnly {Output only summary of logfile [integer number: 0=no,2=yes]}\n"
+ " reqcSkyPlotSignals {Observation signals [character string, list separated by blank character,\n"
+ " example: G:1&2&5 R:1&2&3 E:1&7 C:2&6 J:1&2 I:5&9 S:1&5]}\n"
+ " reqcPlotDir {QC plots directory [character string]}\n"
+ " reqcRnxVersion {RINEX version [integer number: 2|3|4]}\n"
+ " reqcSampling {RINEX output file sampling rate [character string: 0.1 sec|1 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
+ " reqcV2Priority {Version 2 priority of signal attributes [character string, list separated by blank character,\n"
+ " example: G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:18&DPX I:ABCX S:1&C S:5&IQX]}\n"
+ " reqcStartDateTime {Start time [character string, example: 1967-11-02T00:00:00]}\n"
+ " reqcEndDateTime {Stop time [character string, example: 2099-01-01T00:00:00]}\n"
+ " reqcRunBy {Operators name [character string]}\n"
+ " reqcUseObsTypes {Use observation types [character string, list separated by blank character, example: G:C1C G:L1C R:C1C RC1P]}\n"
+ " reqcComment {Additional comments [character string]}\n"
+ " reqcOldMarkerName {Old marker name [character string]}\n"
+ " reqcNewMarkerName {New marker name [character string]}\n"
+ " reqcOldAntennaName {Old antenna name [character string]}\n"
+ " reqcNewAntennaName {New antenna name [character string]}\n"
+ " reqcOldAntennaNumber {Old antenna number [character string]}\n"
+ " reqcNewAntennaNumber {New antenna number [character string]}\n"
+ " reqcOldAntennadN {Old north eccentricity [character string]}\n"
+ " reqcNewAntennadN {New north eccentricity [character string]}\n"
+ " reqcOldAntennadE {Old east eccentricity [character string]}\n"
+ " reqcNewAntennadE {New east eccentricity [character string]}\n"
+ " reqcOldAntennadU {Old up eccentricity [character string]}\n"
+ " reqcNewAntennadU {New up eccentricity [character string]}\n"
+ " reqcOldReceiverName {Old receiver name [character string]}\n"
+ " reqcNewReceiverName {New receiver name [character string]}\n"
+ " reqcOldReceiverNumber {Old receiver number [character string]}\n"
+ " reqcNewReceiverNumber {New receiver number [character string]}\n"
+ "\n"
+ "SP3 Comparison Panel keys:\n"
+ " sp3CompFile {SP3 input files, full path [character string, comma separated list in quotation marks]}\n"
+ " sp3CompExclude {Satellite exclusion list [character string, comma separated list in quotation marks, example: G04,G31,R]}\n"
+ " sp3CompOutLogFile {Output logfile, full path [character string]}\n"
+ " sp3CompSummaryOnly {Output only summary of logfile [integer number: 0=no,2=yes]}\n"
+ "\n"
+ "Broadcast Corrections Panel keys:\n"
+ " corrPath {Directory for saving files in ASCII format [character string]}\n"
+ " corrIntr {File interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
+ " corrPort {Output port [integer number]}\n"
+ "\n"
+ "Feed Engine Panel keys:\n"
+ " outPort {Output port, synchronized [integer number]}\n"
+ " outWait {Wait for full observation epoch [integer number of seconds: 1-30]}\n"
+ " outSampl {Sampling rate [character string: 0.1 sec|1 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
+ " outFile {Output file, full path [character string]}\n"
+ " outUPort {Output port, unsynchronized [integer number]}\n"
+ "\n"
+ "Serial Output Panel:\n"
+ " serialMountPoint {Mountpoint [character string]}\n"
+ " serialPortName {Port name [character string]}\n"
+ " serialBaudRate {Baud rate [integer number: 110|300|600|1200|2400|4800|9600|19200|38400|57600|115200]}\n"
+ " serialFlowControl {Flow control [character string: OFF|XONXOFF|HARDWARE}\n"
+ " serialDataBits {Data bits [integer number: 5|6|7|8]}\n"
+ " serialParity {Parity [character string: NONE|ODD|EVEN|SPACE]}\n"
+ " serialStopBits {Stop bits [integer number: 1|2]}\n"
+ " serialAutoNMEA {NMEA specification [character string: no|Auto|Manual GPGGA|Manual GNGGA]}\n"
+ " serialFileNMEA {NMEA filename, full path [character string]}\n"
+ " serialHeightNMEA {Height [floating-point number]}\n"
+ " serialHeightNMEASampling {Sampling rate [integer number of seconds: 0|10|20|30|...|280|290|300]}\n"
+ "\n"
+ "Outages Panel keys:\n"
+ " adviseObsRate {Stream observation rate [character string: 0.1 Hz|0.2 Hz|0.5 Hz|1 Hz|5 Hz]} \n"
+ " adviseFail {Failure threshold [integer number of minutes: 0-60]}\n"
+ " adviseReco {Recovery threshold [integer number of minutes: 0-60]}\n"
+ " adviseScript {Advisory script, full path [character string]}\n"
+ "\n"
+ "Miscellaneous Panel keys:\n"
+ " miscMount {Mountpoint [character string]}\n"
+ " miscIntr {Interval for logging latency [character string: Blank|2 sec|10 sec|1 min|5 min|15 min|1 hour|6 hours|1 day]}\n"
+ " miscScanRTCM {Scan for RTCM message numbers [integer number: 0=no,2=yes]}\n"
+ " miscPort {Output port [integer number]}\n"
+ "\n"
+ "PPP Client Panel 1 keys:\n"
+ " PPP/dataSource {Data source [character string: Blank|Real-Time Streams|RINEX Files]}\n"
+ " PPP/rinexObs {RINEX observation file, full path [character string]}\n"
+ " PPP/rinexNav {RINEX navigation file, full path [character string]}\n"
+ " PPP/corrMount {Corrections mountpoint [character string]}\n"
+ " PPP/corrFile {Corrections file, full path [character string]}\n"
+ " PPP/crdFile {Coordinates file, full path [character string]}\n"
+ " PPP/logPath {Directory for PPP log files [character string]}\n"
+ " PPP/antexFile {ANTEX file, full path [character string]}\n"
#ifdef USE_PPP
- " PPP/blqFile {BLQ file, full path [character string]}\n"
- " PPP/ionoMount {VTEC mountpoint, [char string]}\n"
- " PPP/ionoFile {VTEC file, full path [char string]}\n"
-#endif
- " PPP/nmeaPath {Directory for NMEA output files [character string]}\n"
- " PPP/snxtroPath {Directory for SINEX troposphere output files [character string]}\n"
- " PPP/snxtroIntr {SINEX troposphere file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
- " PPP/snxtroSampl {SINEX troposphere file sampling rate [character string: 1 sec|5 sec|10 sec|30 sec|60 sec|300 sec]}\n"
- " PPP/snxtroAc {SINEX troposphere Analysis Center [3-char string]}\n"
- " PPP/snxtroSolId {SINEX troposphere solution ID [1-char]}\n"
- " PPP/snxtroSolType {SINEX troposphere solution type, e.g. RTS, UNK, .. [3-char]}\n"
- " PPP/snxtroCampId {SINEX troposphere campaign ID, e.g. DEM, TST, OPS, .. [3-char]}\n"
- "\n"
- "PPP Client Panel 2 keys:\n"
- " PPP/lcGPS {Select the kind of linear combination from GPS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
- " PPP/lcGLONASS {Select the kind of linear combination from GLONASS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
- " PPP/lcGalileo {Select the kind of linear combination from Galileo code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
- " PPP/lcBDS {Select the kind of linear combination from BDS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
- " PPP/sigmaC1 {Sigma for code observations in meters [floating-point number]}\n"
- " PPP/sigmaL1 {Sigma for phase observations in meters [floating-point number]}\n"
- " PPP/maxResC1 {Maximal residuum for code observations in meters [floating-point number]}\n"
- " PPP/maxResL1 {Maximal residuum for phase observations in meters [floating-point number]}\n"
- " PPP/eleWgtCode {Elevation dependent waiting of code observations [integer number: 0=no,2=yes]}\n"
- " PPP/eleWgtPhase {Elevation dependent waiting of phase observations [integer number: 0=no,2=yes]}\n"
- " PPP/minObs {Minimum number of observations [integer number: 4|5|6]}\n"
- " PPP/minEle {Minimum satellite elevation in degrees [integer number: 0-20]}\n"
- " PPP/corrWaitTime {Wait for clock corrections [integer number of seconds: 0-20]}\n"
- " PPP/seedingTime {Seeding time span for Quick Start [integer number of seconds]}\n"
+ " PPP/blqFile {BLQ file, full path [character string]}\n"
+ " PPP/ionoMount {VTEC mountpoint, [char string]}\n"
+ " PPP/ionoFile {VTEC file, full path [char string]}\n"
+#endif
+ " PPP/nmeaPath {Directory for NMEA output files [character string]}\n"
+ " PPP/snxtroPath {Directory for SINEX troposphere output files [character string]}\n"
+ " PPP/snxtroIntr {SINEX troposphere file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
+ " PPP/snxtroSampl {SINEX troposphere file sampling rate [character string: 1 sec|5 sec|10 sec|30 sec|60 sec|300 sec]}\n"
+ " PPP/snxtroAc {SINEX troposphere Analysis Center [3-char string]}\n"
+ " PPP/snxtroSolId {SINEX troposphere solution ID [1-char]}\n"
+ " PPP/snxtroSolType {SINEX troposphere solution type, e.g. RTS, UNK, .. [3-char]}\n"
+ " PPP/snxtroCampId {SINEX troposphere campaign ID, e.g. DEM, TST, OPS, .. [3-char]}\n"
+ "\n"
+ "PPP Client Panel 2 keys:\n"
+ " PPP/lcGPS {Select the kind of linear combination from GPS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
+ " PPP/lcGLONASS {Select the kind of linear combination from GLONASS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
+ " PPP/lcGalileo {Select the kind of linear combination from Galileo code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
+ " PPP/lcBDS {Select the kind of linear combination from BDS code and/or phase data [character string: Pi&Li|Pi|P1&L1|P1|P3&L3|P3|L3|no]}\n"
+ " PPP/sigmaC1 {Sigma for code observations in meters [floating-point number]}\n"
+ " PPP/sigmaL1 {Sigma for phase observations in meters [floating-point number]}\n"
+ " PPP/maxResC1 {Maximal residuum for code observations in meters [floating-point number]}\n"
+ " PPP/maxResL1 {Maximal residuum for phase observations in meters [floating-point number]}\n"
+ " PPP/eleWgtCode {Elevation dependent waiting of code observations [integer number: 0=no,2=yes]}\n"
+ " PPP/eleWgtPhase {Elevation dependent waiting of phase observations [integer number: 0=no,2=yes]}\n"
+ " PPP/minObs {Minimum number of observations [integer number: 4|5|6]}\n"
+ " PPP/minEle {Minimum satellite elevation in degrees [integer number: 0-20]}\n"
+ " PPP/corrWaitTime {Wait for clock corrections [integer number of seconds: 0-20]}\n"
+ " PPP/seedingTime {Seeding time span for Quick Start [integer number of seconds]}\n"
#ifdef USE_PPP
- " PPP/constraints {Specify, whether ionospheric constraints in form of pseudo-observations shall be added [character string: no|Ionosphere: pseudo-obs]}\n"
- " PPP/sigmaGIM {Sigma for GIM pseudo observations in meters [floating-point number]}\n"
- " PPP/maxResGIM {Maximal residuum for GIM pseudo observations in meters [floating-point number]}\n"
-#endif
- "\n"
- "PPP Client Panel 3 keys:\n"
- " PPP/staTable {Station specifications table [character string, semicolon separated list, each element in quotaion marks, example:\n"
- " \"WTZR00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:1&C G:2&W R:1&C R:2&P E:1&C E:5&Q C:26&I;\n"
- " FFMJ00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:12&W R:12&P E:15&X C:26&I\"]}\n"
- "\n"
- "PPP Client Panel 4 keys:\n"
- " PPP/plotCoordinates {Mountpoint for time series plot [character string]}\n"
- " PPP/audioResponse {Audio response threshold in meters [floating-point number]}\n"
- " PPP/mapWinDotSize {Size of dots on map [integer number: 0-10]}\n"
- " PPP/mapWinDotColor {Color of dots and cross hair on map [character string: red|yellow]}\n"
- " PPP/mapSpeedSlider {Off-line processing speed for mapping [integer number: 1-100]}\n"
- "\n"
- "Combine Corrections Panel keys:\n"
- " cmbStreams {Correction streams table [character string, semicolon separated list, each element in quotation marks, example:\n"
- " \"SSRA00ESA0 ESA 1.0;SSRA00BKG BKG 1.0\"]}\n"
- " cmbMethodFilter {Combination approach [character string: Single-Epoch|Filter]}\n"
- " cmbBsxFile {SINEX Bias file, full path [char string]}\n"
- " cmbMaxres {Clock outlier residuum threshold in meters [floating-point number]}\n"
- " cmbMaxdisplacement {Maximal orbit displacement from the mean of corrections for a satellite [floating-point number]}\n"
- " cmbSampl {Clock sampling rate [integer number of seconds: 0|10|20|30|40|50|60]}\n"
- " cmbLogpath {Directory for Combination log files [character string]}\n"
- " cmbGps {GPS correction usage [integer number: 0=no,2=yes]}\n"
- " cmbGlo {GLONASS correction usage [integer number: 0=no,2=yes]}\n"
- " cmbGal {Galileo correction usage [integer number: 0=no,2=yes]}\n"
- " cmbBds {Beidou correction usage [integer number: 0=no,2=yes]}\n"
- " cmbQzss {QZSS correction usage [integer number: 0=no,2=yes]}\n"
- " cmbSbas {SBAS correction usage [integer number: 0=no,2=yes]}\n"
- " cmbNavic {NavIC correction usage [integer number: 0=no,2=yes]}\n"
- "\n"
- "Upload Corrections Panel keys:\n"
- " uploadMountpointsOut {Upload corrections table [character string, semicolon separated list, each element in quotation marks, example:\n"
- " \"products.igs-ip.net,2101,SSRA02IGS1,2,usr,pass,IGS20,IGS-SSR,0,/home/user/BKG0MGXRTS${V3PROD}.SP3,/home/user/BKG0MGXRTS${V3PROD}.CLK,/home/user/BKG0MGXRTS${V3PROD}.BIA,258,1,0;\n"
- " euref-ip.net,2101,SSRA02IGS1_EUREF,2,usr,pass,ETRF2000,RTCM-SSR,0,,,,258,2,0\"]}\n"
- " uploadIntr {Length of SP3, Clock RINEX and Bias SINEX file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
- " uploadSamplRtcmEphCorr {Orbit corrections stream sampling rate [integer number of seconds: 0 sec|1 sec|2 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
- " uploadSamplSp3 {SP3 file sampling rate [integer number of seconds: 0 sec|30 sec|60 sec|300 sec|900 sec]}\n"
- " uploadSamplClkRnx {Clock RINEX file sampling rate [integer number of seconds: 0|5|10|15|20|25|30|35|40|45|50|55|60]}\n"
- " uploadSamplBiaSnx {SINEX Bias file sampling rate [integer number of seconds: 0|5|10|15|20|25|30|35|40|45|50|55|60]}\n"
- "\n"
- "Custom Trafo keys:\n"
- " trafo_dx {Translation X in meters [floating-point number]\n"
- " trafo_dy {Translation Y in meters [floating-point number]\n"
- " trafo_dz {Translation Z in meters [floating-point number]\n"
- " trafo_dxr {Translation change X in meters per year [floating-point number]\n"
- " trafo_dyr {Translation change Y in meters per year [floating-point number]\n"
- " trafo_dzr {Translation change Z in meters per year [floating-point number]\n"
- " trafo_ox {Rotation X in arcsec [floating-point number]}\n"
- " trafo_oy {Rotation Y in arcsec [floating-point number]}\n"
- " trafo_oz {Rotation Z in arcsec [floating-point number]}\n"
- " trafo_oxr {Rotation change X in arcsec per year [floating-point number]}\n"
- " trafo_oyr {Rotation change Y in arcsec per year [floating-point number]}\n"
- " trafo_ozr {Rotation change Z in arcsec per year [floating-point number]}\n"
- " trafo_sc {Scale [10^-9, floating-point number]}\n"
- " trafo_scr {Scale change [10^-9 per year, floating-point number]}\n"
- " trafo_t0 {Reference year [integer number]}\n"
- "\n"
- "Upload Ephemeris Panel keys:\n"
- " uploadEphMountpointsOut {Upload corrections table [character string, semicolon separated list, each element in quotation marks, example:\n"
- " \"products.igs-ip.net,443,BCEP00BKG0,2s,usr,pass,ALL;products.igs-ip.net,443,BCEP01BKG0,2s,usr,pass,G\"]}\n"
- " uploadSamplRtcmEph {Stream upload sampling rate [integer number of seconds: 0|5|10|15|20|25|30|35|40|45|50|55|60]}\n"
- "\n"
- "Add Stream keys:\n"
- " mountPoints {Mountpoints [character string, semicolon separated list, example:\n"
- " \"//user:pass@igs-ip.net:2101/FFMJ00DEU0 RTCM_3.3 DEU 50.09 8.66 no 2;//user:pass@mgex.igs-ip.net:2101/CUT000AUS0 RTCM_3.0 ETH 9.03 38.74 no 2\"}\n"
- " ntripVersion {Ntrip Version [character string: 1|2|2s|R|U]}\n"
- " casterUrlList {Visited Broadcasters [character string, comma separated list]}\n"
- "\n"
- "Appearance keys:\n"
- " startTab {Index of top panel to be presented at start time [integer number: 0-17]}\n"
- " statusTab {Index of bottom panel to be presented at start time [integer number: 0-3]}\n"
- " font {Font specification [character string in quotation marks, example: \"Helvetica,14,-1,5,50,0,0,0,0,0\"]}\n"
- "\n"
- "Note:\n"
- "The syntax of some command line configuration options slightly differs from that\n"
- "used in configuration files: Configuration file options which contain one or more blank\n"
- "characters or contain a semicolon separated parameter list must be enclosed by quotation\n"
- "marks when specified on command line.\n"
- "\n"
- "Examples command lines:\n"
- "(1) /home/weber/bin/bnc\n"
- "(2) /Applications/bnc.app/Contents/MacOS/bnc\n"
- "(3) /home/userName/bin/bnc --conf /home/userName/MyConfigFile.bnc\n"
- "(4) bnc --conf /Users/userName/.config/BKG/BNC.bnc -nw\n"
- "(5) bnc --conf /dev/null --key startTab 4 --key reqcAction Edit/Concatenate"
- " --key reqcObsFile BRUX00BEL_S_20211251100_15M_01S_MO.rnx --key reqcOutObsFile BRUX00BEL_S_20211251100_15M_01S_MO_OUT.rnx"
- " --key reqcRnxVersion 2 --key reqcSampling \"30 sec\" --key reqcV2Priority \"G:12&PWCSLX G:5&IQX\"\n"
- "(6) bnc --conf /dev/null --key mountPoints \"//user:pass@mgex.igs-ip.net:2101/CUT000AUS0 RTCM_3.0 ETH 9.03 38.74 no 2;"
- "//user:pass@igs-ip.net:2101/FFMJ00DEU1 RTCM_3.1 DEU 50.09 8.66 no 2\"\n"
- "(7) bnc --conf /dev/null --key startTab 15 --key cmbStreams \"SSRA00BKG1 BKG 1.0;SSRA00CNE1 CNES 1.0\"\n"
- "(8) bnc --conf /dev/null --key startTab 16 --key uploadMountpointsOut \"products.igs-ip.net,2101,SSRC00BKG1,2,usr,pass,IGS20,RTCM-SSR,2,/Users/userName/BKG0MGXRTS${V3PROD}.SP3,,,33,3,2;"
- "euref-ip.net,443,SSRA00BKG1_EUREF,2s,usr,pass,ETRF2000,IGS-SSR,0,,,,33,5,5\"\n"
- "(9) bnc --conf /dev/null --key startTab 13 --key PPP/dataSource \"Real-Time Streams\" --key PPP/staTable \"FFMJ00DEU1,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7777,G:12&W R:12&P E:1&C E:5&Q C:26&I;"
- "CUT000AUS0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7778,G:1&C G:2&W R:12&P E:15&X C:26&I\"\n";
-
-
- for (int ii = 1; ii < argc; ii++) {
- if (QRegExp("--?help").exactMatch(argv[ii])) {
- cout << printHelp.data();
- exit(0);
- }
- if (QRegExp("--?nw").exactMatch(argv[ii])) {
- interactive = false;
- }
- if (QRegExp("--?version").exactMatch(argv[ii])) {
- cout << BNCPGMNAME << endl;
- exit(0);
- }
- if (QRegExp("--?display").exactMatch(argv[ii])) {
- displaySet = true;
- strcpy(argv[ii], "-display"); // make it "-display" not "--display"
- }
- if (ii + 1 < argc) {
- if (QRegExp("--?conf").exactMatch(argv[ii])) {
- confFileName = QString(argv[ii+1]);
- }
- if (QRegExp("--?file").exactMatch(argv[ii])) {
- interactive = false;
- rawFileName = QByteArray(argv[ii+1]);
- }
- }
- }
+ " PPP/constraints {Specify, whether ionospheric constraints in form of pseudo-observations shall be added [character string: no|Ionosphere: pseudo-obs]}\n"
+ " PPP/sigmaGIM {Sigma for GIM pseudo observations in meters [floating-point number]}\n"
+ " PPP/maxResGIM {Maximal residuum for GIM pseudo observations in meters [floating-point number]}\n"
+#endif
+ "\n"
+ "PPP Client Panel 3 keys:\n"
+ " PPP/staTable {Station specifications table [character string, semicolon separated list, each element in quotaion marks, example:\n"
+ " \"WTZR00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:1&C G:2&W R:1&C R:2&P E:1&C E:5&Q C:26&I;\n"
+ " FFMJ00DEU0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,0,G:12&W R:12&P E:15&X C:26&I\"]}\n"
+ "\n"
+ "PPP Client Panel 4 keys:\n"
+ " PPP/plotCoordinates {Mountpoint for time series plot [character string]}\n"
+ " PPP/audioResponse {Audio response threshold in meters [floating-point number]}\n"
+ " PPP/mapWinDotSize {Size of dots on map [integer number: 0-10]}\n"
+ " PPP/mapWinDotColor {Color of dots and cross hair on map [character string: red|yellow]}\n"
+ " PPP/mapSpeedSlider {Off-line processing speed for mapping [integer number: 1-100]}\n"
+ "\n"
+ "Combine Corrections Panel keys:\n"
+ " cmbStreams {Correction streams table [character string, semicolon separated list, each element in quotation marks, example:\n"
+ " \"SSRA00ESA0 ESA 1.0;SSRA00BKG BKG 1.0\"]}\n"
+ " cmbMethodFilter {Combination approach [character string: Single-Epoch|Filter]}\n"
+ " cmbBsxFile {SINEX Bias file, full path [char string]}\n"
+ " cmbMaxres {Clock outlier residuum threshold in meters [floating-point number]}\n"
+ " cmbMaxdisplacement {Maximal orbit displacement from the mean of corrections for a satellite [floating-point number]}\n"
+ " cmbSampl {Clock sampling rate [integer number of seconds: 1 sec|2 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
+ " cmbLogpath {Directory for Combination log files [character string]}\n"
+ " cmbGps {GPS correction usage [integer number: 0=no,2=yes]}\n"
+ " cmbGlo {GLONASS correction usage [integer number: 0=no,2=yes]}\n"
+ " cmbGal {Galileo correction usage [integer number: 0=no,2=yes]}\n"
+ " cmbBds {Beidou correction usage [integer number: 0=no,2=yes]}\n"
+ " cmbQzss {QZSS correction usage [integer number: 0=no,2=yes]}\n"
+ " cmbSbas {SBAS correction usage [integer number: 0=no,2=yes]}\n"
+ " cmbNavic {NavIC correction usage [integer number: 0=no,2=yes]}\n"
+ "\n"
+ "Upload Corrections Panel keys:\n"
+ " uploadMountpointsOut {Upload corrections table [character string, semicolon separated list, each element in quotation marks, example:\n"
+ " \"products.igs-ip.net,2101,SSRA02IGS1,2,usr,pass,IGS20,IGS-SSR,0,/home/user/BKG0MGXRTS${V3PROD}.SP3,/home/user/BKG0MGXRTS${V3PROD}.CLK,/home/user/BKG0MGXRTS${V3PROD}.BIA,258,1,0;\n"
+ " euref-ip.net,2101,SSRA02IGS1_EUREF,2,usr,pass,ETRF2000,RTCM-SSR,0,,,,258,2,0\"]}\n"
+ " uploadIntr {Length of SP3, Clock RINEX and Bias SINEX file interval [character string: 1 min|2 min|5 min|10 min|15 min|30 min|1 hour|1 day]}\n"
+ " uploadSamplRtcmEphCorr {Orbit corrections stream sampling rate [integer number of seconds: 0 sec|1 sec|2 sec|5 sec|10 sec|15 sec|30 sec|60 sec]}\n"
+ " uploadSamplSp3 {SP3 file sampling rate [integer number of seconds: 0 sec|30 sec|60 sec|300 sec|900 sec]}\n"
+ " uploadSamplClkRnx {Clock RINEX file sampling rate [integer number of seconds: 0 sec|5 sec|10 sec|15 sec|20 sec|25 sec|30 sec|35 sec|40 sec|45 sec|50 sec|55 sec|60 sec]}\n"
+ " uploadSamplBiaSnx {SINEX Bias file sampling rate [integer number of seconds: 0 sec|5 sec|10 sec|15 sec|20 sec|25 sec|30 sec|35 sec|40 sec|45 sec|50 sec|55 sec|60 sec]}\n"
+ "\n"
+ "Custom Trafo keys:\n"
+ " trafo_dx {Translation X in meters [floating-point number]\n"
+ " trafo_dy {Translation Y in meters [floating-point number]\n"
+ " trafo_dz {Translation Z in meters [floating-point number]\n"
+ " trafo_dxr {Translation change X in meters per year [floating-point number]\n"
+ " trafo_dyr {Translation change Y in meters per year [floating-point number]\n"
+ " trafo_dzr {Translation change Z in meters per year [floating-point number]\n"
+ " trafo_ox {Rotation X in arcsec [floating-point number]}\n"
+ " trafo_oy {Rotation Y in arcsec [floating-point number]}\n"
+ " trafo_oz {Rotation Z in arcsec [floating-point number]}\n"
+ " trafo_oxr {Rotation change X in arcsec per year [floating-point number]}\n"
+ " trafo_oyr {Rotation change Y in arcsec per year [floating-point number]}\n"
+ " trafo_ozr {Rotation change Z in arcsec per year [floating-point number]}\n"
+ " trafo_sc {Scale [10^-9, floating-point number]}\n"
+ " trafo_scr {Scale change [10^-9 per year, floating-point number]}\n"
+ " trafo_t0 {Reference year [integer number]}\n"
+ "\n"
+ "Upload Ephemeris Panel keys:\n"
+ " uploadEphMountpointsOut {Upload corrections table [character string, semicolon separated list, each element in quotation marks, example:\n"
+ " \"products.igs-ip.net,443,BCEP00BKG0,2s,usr,pass,ALL;products.igs-ip.net,443,BCEP01BKG0,2s,usr,pass,G\"]}\n"
+ " uploadSamplRtcmEph {Stream upload sampling rate [integer number of seconds: 0|5|10|15|20|25|30|35|40|45|50|55|60]}\n"
+ "\n"
+ "Add Stream keys:\n"
+ " mountPoints {Mountpoints [character string, semicolon separated list, example:\n"
+ " \"//user:pass@igs-ip.net:2101/FFMJ00DEU0 RTCM_3.3 DEU 50.09 8.66 no 2;//user:pass@mgex.igs-ip.net:2101/CUT000AUS0 RTCM_3.0 ETH 9.03 38.74 no 2\"}\n"
+ " ntripVersion {Ntrip Version [character string: 1|2|2s|R|U]}\n"
+ " casterUrlList {Visited Broadcasters [character string, comma separated list]}\n"
+ "\n"
+ "Appearance keys:\n"
+ " startTab {Index of top panel to be presented at start time [integer number: 0-17]}\n"
+ " statusTab {Index of bottom panel to be presented at start time [integer number: 0-3]}\n"
+ " font {Font specification [character string in quotation marks, example: \"Helvetica,14,-1,5,50,0,0,0,0,0\"]}\n"
+ "\n"
+ "Note:\n"
+ "The syntax of some command line configuration options slightly differs from that\n"
+ "used in configuration files: Configuration file options which contain one or more blank\n"
+ "characters or contain a semicolon separated parameter list must be enclosed by quotation\n"
+ "marks when specified on command line.\n"
+ "\n"
+ "Examples command lines:\n"
+ "(1) /home/weber/bin/bnc\n"
+ "(2) /Applications/bnc.app/Contents/MacOS/bnc\n"
+ "(3) /home/userName/bin/bnc --conf /home/userName/MyConfigFile.bnc\n"
+ "(4) bnc --conf /Users/userName/.config/BKG/BNC.bnc -nw\n"
+ "(5) bnc --conf /dev/null --key startTab 4 --key reqcAction Edit/Concatenate"
+ " --key reqcObsFile BRUX00BEL_S_20211251100_15M_01S_MO.rnx --key reqcOutObsFile BRUX00BEL_S_20211251100_15M_01S_MO_OUT.rnx"
+ " --key reqcRnxVersion 2 --key reqcSampling \"30 sec\" --key reqcV2Priority \"G:12&PWCSLX G:5&IQX\"\n"
+ "(6) bnc --conf /dev/null --key mountPoints \"//user:pass@mgex.igs-ip.net:2101/CUT000AUS0 RTCM_3.0 ETH 9.03 38.74 no 2;"
+ "//user:pass@igs-ip.net:2101/FFMJ00DEU1 RTCM_3.1 DEU 50.09 8.66 no 2\"\n"
+ "(7) bnc --conf /dev/null --key startTab 15 --key cmbStreams \"SSRA00BKG1 BKG 1.0;SSRA00CNE1 CNES 1.0\"\n"
+ "(8) bnc --conf /dev/null --key startTab 16 --key uploadMountpointsOut \"products.igs-ip.net,2101,SSRC00BKG1,2,usr,pass,IGS20,RTCM-SSR,2,/Users/userName/BKG0MGXRTS${V3PROD}.SP3,,,33,3,2;"
+ "euref-ip.net,443,SSRA00BKG1_EUREF,2s,usr,pass,ETRF2000,IGS-SSR,0,,,,33,5,5\"\n"
+ "(9) bnc --conf /dev/null --key startTab 13 --key PPP/dataSource \"Real-Time Streams\" --key PPP/staTable \"FFMJ00DEU1,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7777,G:12&W R:12&P E:1&C E:5&Q C:26&I;"
+ "CUT000AUS0,100.0,100.0,100.0,100.0,100.0,100.0,0.1,3e-6,7778,G:1&C G:2&W R:12&P E:15&X C:26&I\"\n";
+
+
+ for (int ii = 1; ii < argc; ii++) {
+ if (QRegExp("--?help").exactMatch(argv[ii])) {
+ cout << printHelp.data();
+ exit(0);
+ }
+ if (QRegExp("--?nw").exactMatch(argv[ii])) {
+ interactive = false;
+ }
+ if (QRegExp("--?version").exactMatch(argv[ii])) {
+ cout << BNCPGMNAME << endl;
+ exit(0);
+ }
+ if (QRegExp("--?display").exactMatch(argv[ii])) {
+ displaySet = true;
+ strcpy(argv[ii], "-display"); // make it "-display" not "--display"
+ }
+ if (ii + 1 < argc) {
+ if (QRegExp("--?conf").exactMatch(argv[ii])) {
+ confFileName = QString(argv[ii + 1]);
+ }
+ if (QRegExp("--?file").exactMatch(argv[ii])) {
+ interactive = false;
+ rawFileName = QByteArray(argv[ii + 1]);
+ }
+ }
+ }
#ifdef Q_OS_MAC
- if (argc== 3 && interactive) {
- confFileName = QString(argv[2]);
- }
+ if (argc == 3 && interactive) {
+ confFileName = QString(argv[2]);
+ }
#else
- if (argc == 2 && interactive) {
- confFileName = QString(argv[1]);
- }
+ if (argc == 2 && interactive) {
+ confFileName = QString(argv[1]);
+ }
#endif
#ifdef Q_OS_MACX
- if ( QSysInfo::MacintoshVersion > QSysInfo::MV_10_8 )
+ if (QSysInfo::MacintoshVersion > QSysInfo::MV_10_8)
{
// fix Mac OS X 10.9 (mavericks) font issue
@@ -425,176 +425,176 @@
#endif
- bool GUIenabled = interactive || displaySet;
- QScopedPointer app(createApplication(argc, argv, GUIenabled));
-
- if (qobject_cast(app.data())) { // start GUI version
- app->setApplicationName("BNC");
- app->setOrganizationName("BKG");
- app->setOrganizationDomain("www.bkg.bund.de"); //app->setWindowIcon(QPixmap(":ntrip-logo.png"));
- BNC_CORE->setGUIenabled(GUIenabled);
- }
- BNC_CORE->setConfFileName( confFileName );
-
- bncSettings settings;
-
- // Proxy Settings
- // --------------
- QString proxyHost = settings.value("proxyHost").toString();
- int proxyPort = settings.value("proxyPort").toInt();
- if (!proxyHost.isEmpty()) {
- QNetworkProxy proxy;
- proxy.setType(QNetworkProxy::HttpProxy);
- proxy.setHostName(proxyHost);
- proxy.setPort(proxyPort);
- QNetworkProxy::setApplicationProxy(proxy);
- }
- else {
- QNetworkProxyFactory::setUseSystemConfiguration(true);
- }
-
- for (int ii = 1; ii < argc - 2; ii++) {
- if (QRegExp("--?key").exactMatch(argv[ii])) {
- QString key(argv[ii+1]);
- QString val(argv[ii+2]);
- if (val.indexOf(";") != -1) {
- settings.setValue(key, val.split(";", Qt::SkipEmptyParts));
- }
- else {
- settings.setValue(key, val);
- }
- }
- }
-
- // Interactive Mode - open the main window
- // -----------------------------------------
- if (interactive) {
-
- BNC_CORE->setMode(t_bncCore::interactive);
-
- QString fontString = settings.value("font").toString();
- if ( !fontString.isEmpty() ) {
- QFont newFont;
- if (newFont.fromString(fontString)) {
- QApplication::setFont(newFont);
- }
- }
-
- bncWin = new bncWindow();
- BNC_CORE->setMainWindow(bncWin);
- bncWin->show();
- }
-
- // Post-Processing PPP
- // -------------------
- else if (settings.value("PPP/dataSource").toString() == "RINEX Files") {
- caster = new bncCaster();
- BNC_CORE->setCaster(caster);
- BNC_CORE->setMode(t_bncCore::batchPostProcessing);
- BNC_CORE->startPPP();
- }
-
- // Post-Processing reqc edit
- // -------------------------
- else if (settings.value("reqcAction").toString() == "Edit/Concatenate") {
- BNC_CORE->setMode(t_bncCore::batchPostProcessing);
- reqcEdit = new t_reqcEdit(0);
- reqcEdit->start();
- }
-
- // Post-Processing reqc analyze
- // ----------------------------
- else if (settings.value("reqcAction").toString() == "Analyze") {
- BNC_CORE->setMode(t_bncCore::batchPostProcessing);
- reqcAnalyze = new t_reqcAnalyze(0);
- reqcAnalyze->start();
- }
-
- // SP3 Files Comparison
- // --------------------
- else if (!settings.value("sp3CompFile").toString().isEmpty()) {
- BNC_CORE->setMode(t_bncCore::batchPostProcessing);
- sp3Comp = new t_sp3Comp(0);
- sp3Comp->start();
- }
-
- // Non-Interactive (data gathering)
- // --------------------------------
- else {
-
- signal(SIGINT, catch_SIGINT);
- signal(SIGTERM, catch_SIGTERM);
- BNC_CORE->sigintReceived = 0;
+ bool GUIenabled = interactive || displaySet;
+ QScopedPointer app(createApplication(argc, argv, GUIenabled));
+
+ if (qobject_cast(app.data())) { // start GUI version
+ app->setApplicationName("BNC");
+ app->setOrganizationName("BKG");
+ app->setOrganizationDomain("www.bkg.bund.de"); //app->setWindowIcon(QPixmap(":ntrip-logo.png"));
+ BNC_CORE->setGUIenabled(GUIenabled);
+ }
+ BNC_CORE->setConfFileName(confFileName);
+
+ bncSettings settings;
+
+ // Proxy Settings
+ // --------------
+ QString proxyHost = settings.value("proxyHost").toString();
+ int proxyPort = settings.value("proxyPort").toInt();
+ if (!proxyHost.isEmpty()) {
+ QNetworkProxy proxy;
+ proxy.setType(QNetworkProxy::HttpProxy);
+ proxy.setHostName(proxyHost);
+ proxy.setPort(proxyPort);
+ QNetworkProxy::setApplicationProxy(proxy);
+ }
+ else {
+ QNetworkProxyFactory::setUseSystemConfiguration(true);
+ }
+
+ for (int ii = 1; ii < argc - 2; ii++) {
+ if (QRegExp("--?key").exactMatch(argv[ii])) {
+ QString key(argv[ii + 1]);
+ QString val(argv[ii + 2]);
+ if (val.indexOf(";") != -1) {
+ settings.setValue(key, val.split(";", Qt::SkipEmptyParts));
+ }
+ else {
+ settings.setValue(key, val);
+ }
+ }
+ }
+
+ // Interactive Mode - open the main window
+ // -----------------------------------------
+ if (interactive) {
+
+ BNC_CORE->setMode(t_bncCore::interactive);
+
+ QString fontString = settings.value("font").toString();
+ if (!fontString.isEmpty()) {
+ QFont newFont;
+ if (newFont.fromString(fontString)) {
+ QApplication::setFont(newFont);
+ }
+ }
+
+ bncWin = new bncWindow();
+ BNC_CORE->setMainWindow(bncWin);
+ bncWin->show();
+ }
+
+ // Post-Processing PPP
+ // -------------------
+ else if (settings.value("PPP/dataSource").toString() == "RINEX Files") {
+ caster = new bncCaster();
+ BNC_CORE->setCaster(caster);
+ BNC_CORE->setMode(t_bncCore::batchPostProcessing);
+ BNC_CORE->startPPP();
+ }
+
+ // Post-Processing reqc edit
+ // -------------------------
+ else if (settings.value("reqcAction").toString() == "Edit/Concatenate") {
+ BNC_CORE->setMode(t_bncCore::batchPostProcessing);
+ reqcEdit = new t_reqcEdit(0);
+ reqcEdit->start();
+ }
+
+ // Post-Processing reqc analyze
+ // ----------------------------
+ else if (settings.value("reqcAction").toString() == "Analyze") {
+ BNC_CORE->setMode(t_bncCore::batchPostProcessing);
+ reqcAnalyze = new t_reqcAnalyze(0);
+ reqcAnalyze->start();
+ }
+
+ // SP3 Files Comparison
+ // --------------------
+ else if (!settings.value("sp3CompFile").toString().isEmpty()) {
+ BNC_CORE->setMode(t_bncCore::batchPostProcessing);
+ sp3Comp = new t_sp3Comp(0);
+ sp3Comp->start();
+ }
+
+ // Non-Interactive (data gathering)
+ // --------------------------------
+ else {
+
+ signal(SIGINT, catch_SIGINT);
+ signal(SIGTERM, catch_SIGTERM);
+ BNC_CORE->sigintReceived = 0;
#ifndef WIN32
- signal(SIGHUP, catch_SIGHUP);
-#endif
-
- casterEph = new bncEphUploadCaster(); (void) casterEph;
-
- caster = new bncCaster();
-
- BNC_CORE->setCaster(caster);
- BNC_CORE->setPortEph(settings.value("ephOutPort").toInt());
- BNC_CORE->setPortCorr(settings.value("corrPort").toInt());
- BNC_CORE->initCombination();
-
- BNC_CORE->connect(caster, SIGNAL(getThreadsFinished()), app->instance(), SLOT(quit()));
-
- BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " (" BNC_OS ") ==========", true);
-
-
- // Normal case - data from Internet
- // --------------------------------
- if ( rawFileName.isEmpty() ) {
- BNC_CORE->setMode(t_bncCore::nonInteractive);
- BNC_CORE->startPPP();
-
- caster->readMountPoints();
- if (caster->numStations() == 0) {
- BNC_CORE->slotMessage("bncMain: number of caster stations: 0 => exit" , true);
- exit(3);
- }
- }
-
- // Special case - data from file
- // -----------------------------
+ signal(SIGHUP, catch_SIGHUP);
+#endif
+
+ casterEph = new bncEphUploadCaster(); (void)casterEph;
+
+ caster = new bncCaster();
+
+ BNC_CORE->setCaster(caster);
+ BNC_CORE->setPortEph(settings.value("ephOutPort").toInt());
+ BNC_CORE->setPortCorr(settings.value("corrPort").toInt());
+ BNC_CORE->initCombination();
+
+ BNC_CORE->connect(caster, SIGNAL(getThreadsFinished()), app->instance(), SLOT(quit()));
+
+ BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " (" BNC_OS ") ==========", true);
+
+
+ // Normal case - data from Internet
+ // --------------------------------
+ if (rawFileName.isEmpty()) {
+ BNC_CORE->setMode(t_bncCore::nonInteractive);
+ BNC_CORE->startPPP();
+
+ caster->readMountPoints();
+ if (caster->numStations() == 0) {
+ BNC_CORE->slotMessage("bncMain: number of caster stations: 0 => exit", true);
+ exit(3);
+ }
+ }
+
+ // Special case - data from file
+ // -----------------------------
+ else {
+ BNC_CORE->setMode(t_bncCore::batchPostProcessing);
+ BNC_CORE->startPPP();
+
+ rawFile = new bncRawFile(rawFileName, "", bncRawFile::input);
+ getThread = new bncGetThread(rawFile);
+ caster->addGetThread(getThread, true);
+ }
+
+ }
+
+ // Start the application
+ // ---------------------
+ app->exec();
+
+ // End of application
+ // ------------------
+ if (interactive) {
+ delete bncWin;
+ }
else {
- BNC_CORE->setMode(t_bncCore::batchPostProcessing);
- BNC_CORE->startPPP();
-
- rawFile = new bncRawFile(rawFileName, "", bncRawFile::input);
- getThread = new bncGetThread(rawFile);
- caster->addGetThread(getThread, true);
- }
-
- }
-
- // Start the application
- // ---------------------
- app->exec();
-
- // End of application
- // ------------------
- if (interactive) {
- delete bncWin;
- }
- else {
- BNC_CORE->stopPPP();
- BNC_CORE->stopCombination();
+ BNC_CORE->stopPPP();
+ BNC_CORE->stopCombination();
#ifndef WIN32
- sleep(2);
+ sleep(2);
#else
- Sleep(2000);
-#endif
- }
- if (caster) {
- delete caster; caster = 0; BNC_CORE->setCaster(0);
- }
- if (casterEph) {
- delete casterEph; casterEph = 0;
- }
- if (rawFile) {
- delete rawFile;
- }
-
- return 0;
+ Sleep(2000);
+#endif
+ }
+ if (caster) {
+ delete caster; caster = 0; BNC_CORE->setCaster(0);
+ }
+ if (casterEph) {
+ delete casterEph; casterEph = 0;
+ }
+ if (rawFile) {
+ delete rawFile;
+ }
+
+ return 0;
}