source: ntrip/trunk/BNC/src/bncwindow.cpp @ 7890

Last change on this file since 7890 was 7890, checked in by stuerze, 3 years ago

minor changes

File size: 153.6 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70#  include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83  const static QPalette paletteWhite(QColor(255, 255, 255));
84  const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87  BNC_CORE->setConfFileName("");
88#endif
89
90  _caster    = 0;
91  _casterEph = 0;
92
93  _bncFigure     = new bncFigure(this);
94  _bncFigureLate = new bncFigureLate(this);
95  _bncFigurePPP  = new bncFigurePPP(this);
96
97  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
102
103  _runningRealTime    = false;
104  _runningPPP         = false;
105  _runningEdit        = false;
106  _runningQC          = false;
107  _runningSp3Comp     = false;
108  _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110  _mapWin = 0;
111
112  int ww = QFontMetrics(this->font()).width('w');
113
114  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116  setMinimumSize(100*ww, 70*ww);
117
118  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121          this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123  // Create Actions
124  // --------------
125  _actHelp = new QAction(tr("&Help Contents"),this);
126  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128  _actAbout = new QAction(tr("&About BNC"),this);
129  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131  _actFlowchart = new QAction(tr("&Flow Chart"),this);
132  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134  _actFontSel = new QAction(tr("Select &Font"),this);
135  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140  _actQuit  = new QAction(tr("&Quit"),this);
141  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148  _actDeleteMountPoints->setEnabled(false);
149
150  _actMapMountPoints = new QAction(tr("&Map"),this);
151  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153  _actStart = new QAction(tr("Sta&rt"),this);
154  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156  _actStop = new QAction(tr("Sto&p"),this);
157  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158
159  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
160  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
161
162  CreateMenu();
163  AddToolbar();
164
165  bncSettings settings;
166
167  // Network Options
168  // ---------------
169  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
170  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
171
172  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
173          this, SLOT(slotBncTextChanged()));
174
175  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
176  _sslIgnoreErrorsCheckBox = new QCheckBox();
177  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
178                                          settings.value("sslIgnoreErrors").toInt()));
179
180  // General Options
181  // ---------------
182  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
183  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
184  _rnxAppendCheckBox  = new QCheckBox();
185  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
186                                    settings.value("rnxAppend").toInt()));
187  _onTheFlyComboBox = new QComboBox();
188  _onTheFlyComboBox->setEditable(false);
189  _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
190  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
191  if (ii != -1) {
192    _onTheFlyComboBox->setCurrentIndex(ii);
193  }
194  _autoStartCheckBox  = new QCheckBox();
195  _autoStartCheckBox->setCheckState(Qt::CheckState(
196                                    settings.value("autoStart").toInt()));
197
198  // RINEX Observations Options
199  // --------------------------
200  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
201  _rnxIntrComboBox    = new QComboBox();
202  _rnxIntrComboBox->setEditable(false);
203  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
205  if (ii != -1) {
206    _rnxIntrComboBox->setCurrentIndex(ii);
207  }
208  _rnxSamplSpinBox    = new QSpinBox();
209  _rnxSamplSpinBox->setMinimum(0);
210  _rnxSamplSpinBox->setMaximum(60);
211  _rnxSamplSpinBox->setSingleStep(5);
212  _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
213  _rnxFileCheckBox = new QCheckBox();
214  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
215  _rnxSamplSpinBox->setSuffix(" sec");
216  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
217  _rnxSkelLineEdit->setMaximumWidth(5*ww);
218  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
219  _rnxV3CheckBox      = new QCheckBox();
220  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
221  _rnxV3filenameCheckBox = new QCheckBox();
222  _rnxV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3filenames").toInt()));
223  QString hlp = settings.value("rnxV2Priority").toString();
224  if (hlp.isEmpty()) {
225    hlp = "CWPX_?";
226  }
227  _rnxV2Priority = new QLineEdit(hlp);
228
229  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
230          this, SLOT(slotBncTextChanged()));
231  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
232          this, SLOT(slotBncTextChanged()));
233
234  // RINEX Ephemeris Options
235  // -----------------------
236  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
237  _ephIntrComboBox    = new QComboBox();
238  _ephIntrComboBox->setEditable(false);
239  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
240  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
241  if (jj != -1) {
242    _ephIntrComboBox->setCurrentIndex(jj);
243  }
244  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
245  _ephV3CheckBox = new QCheckBox();
246  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
247
248  _ephV3filenameCheckBox = new QCheckBox();
249  _ephV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("ephV3filenames").toInt()));
250
251  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
252          this, SLOT(slotBncTextChanged()));
253
254  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
255          this, SLOT(slotBncTextChanged()));
256
257  // Broadcast Corrections Options
258  // -----------------------------
259  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
260  _corrIntrComboBox    = new QComboBox();
261  _corrIntrComboBox->setEditable(false);
262  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
263  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
264  if (mm != -1) {
265    _corrIntrComboBox->setCurrentIndex(mm);
266  }
267  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
268
269  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
270          this, SLOT(slotBncTextChanged()));
271
272  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
273          this, SLOT(slotBncTextChanged()));
274
275  // Feed Engine Options
276  // -------------------
277  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
278  _outWaitSpinBox   = new QSpinBox();
279  _outWaitSpinBox->setMinimum(1);
280  _outWaitSpinBox->setMaximum(30);
281  _outWaitSpinBox->setSingleStep(1);
282  _outWaitSpinBox->setSuffix(" sec");
283  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
284  _outSamplSpinBox    = new QSpinBox();
285  _outSamplSpinBox->setMinimum(0);
286  _outSamplSpinBox->setMaximum(60);
287  _outSamplSpinBox->setSingleStep(5);
288  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
289  _outSamplSpinBox->setSuffix(" sec");
290  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
291  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
292
293  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
294          this, SLOT(slotBncTextChanged()));
295
296  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
297          this, SLOT(slotBncTextChanged()));
298
299  // Serial Output Options
300  // ---------------------
301  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
302  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
303  _serialBaudRateComboBox = new QComboBox();
304  _serialBaudRateComboBox->addItems(QString("110,300,600,"
305            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
306  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
307  if (kk != -1) {
308    _serialBaudRateComboBox->setCurrentIndex(kk);
309  }
310  _serialFlowControlComboBox = new QComboBox();
311  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
312  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
313  if (kk != -1) {
314    _serialFlowControlComboBox->setCurrentIndex(kk);
315  }
316  _serialDataBitsComboBox = new QComboBox();
317  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
318  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
319  if (kk != -1) {
320    _serialDataBitsComboBox->setCurrentIndex(kk);
321  }
322  _serialParityComboBox   = new QComboBox();
323  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
324  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
325  if (kk != -1) {
326    _serialParityComboBox->setCurrentIndex(kk);
327  }
328  _serialStopBitsComboBox = new QComboBox();
329  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
330  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
331  if (kk != -1) {
332    _serialStopBitsComboBox->setCurrentIndex(kk);
333  }
334  _serialAutoNMEAComboBox  = new QComboBox();
335  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
336  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
337  if (kk != -1) {
338    _serialAutoNMEAComboBox->setCurrentIndex(kk);
339  }
340  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
341  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
342
343  _serialManualNMEASamplingSpinBox = new QSpinBox();
344  _serialManualNMEASamplingSpinBox->setMinimum(0);
345  _serialManualNMEASamplingSpinBox->setMaximum(300);
346  _serialManualNMEASamplingSpinBox->setSingleStep(10);
347  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
348  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
349
350  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
351          this, SLOT(slotBncTextChanged()));
352
353  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
354          this, SLOT(slotBncTextChanged()));
355
356  // Outages Options
357  // ---------------
358  _adviseObsRateComboBox    = new QComboBox();
359  _adviseObsRateComboBox->setEditable(false);
360  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
361  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
362  if (kk != -1) {
363    _adviseObsRateComboBox->setCurrentIndex(kk);
364  }
365  _adviseFailSpinBox = new QSpinBox();
366  _adviseFailSpinBox->setMinimum(0);
367  _adviseFailSpinBox->setMaximum(60);
368  _adviseFailSpinBox->setSingleStep(1);
369  _adviseFailSpinBox->setSuffix(" min");
370  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
371  _adviseRecoSpinBox = new QSpinBox();
372  _adviseRecoSpinBox->setMinimum(0);
373  _adviseRecoSpinBox->setMaximum(60);
374  _adviseRecoSpinBox->setSingleStep(1);
375  _adviseRecoSpinBox->setSuffix(" min");
376  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
377  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
378
379  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
380          this, SLOT(slotBncTextChanged()));
381
382  // Miscellaneous Options
383  // ---------------------
384  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
385  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
386  _miscIntrComboBox   = new QComboBox();
387  _miscIntrComboBox->setEditable(false);
388  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
389  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
390  if (ll != -1) {
391    _miscIntrComboBox->setCurrentIndex(ll);
392  }
393  _miscScanRTCMCheckBox  = new QCheckBox();
394  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
395                                    settings.value("miscScanRTCM").toInt()));
396
397  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
398          this, SLOT(slotBncTextChanged()));
399
400  // Streams
401  // -------
402  _mountPointsTable   = new QTableWidget(0,9);
403
404  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
405  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
406  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
407  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
408  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
409  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
410  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
411  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
412  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
413  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
414  _mountPointsTable->setHorizontalHeaderLabels(labels);
415  _mountPointsTable->setGridStyle(Qt::NoPen);
416  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
417  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
418  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
419  _mountPointsTable->hideColumn(0);
420  _mountPointsTable->hideColumn(3);
421  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
422          SLOT(slotSelectionChanged()));
423  populateMountPointsTable();
424
425  _log = new QTextEdit();
426  _log->setReadOnly(true);
427  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
428  _log->setFont(msFont);
429  _log->document()->setMaximumBlockCount(1000);
430
431  // Combine Corrections
432  // -------------------
433  _cmbTable = new QTableWidget(0,3);
434  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
435  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
436  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
437  _cmbTable->setMaximumWidth(30*ww);
438  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
439  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
440  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
441  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
442  _cmbTable->horizontalHeader()->setStretchLastSection(true);
443  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
444
445  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
446  _cmbUseGlonass     = new QCheckBox();
447  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
448
449  _cmbSamplSpinBox = new QSpinBox;
450  _cmbSamplSpinBox->setMinimum(10);
451  _cmbSamplSpinBox->setMaximum(60);
452  _cmbSamplSpinBox->setSingleStep(10);
453  _cmbSamplSpinBox->setMaximumWidth(9*ww);
454  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
455  _cmbSamplSpinBox->setSuffix(" sec");
456
457  QPushButton* addCmbRowButton = new QPushButton("Add Row");
458  QPushButton* delCmbRowButton = new QPushButton("Delete");
459
460  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
461          SLOT(slotBncTextChanged()));
462
463  _cmbMethodComboBox = new QComboBox();
464  _cmbMethodComboBox->setEditable(false);
465  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
466  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
467  if (im != -1) {
468    _cmbMethodComboBox->setCurrentIndex(im);
469  }
470
471  int iRow = _cmbTable->rowCount();
472  if (iRow > 0) {
473    enableWidget(true, _cmbMethodComboBox);
474    enableWidget(true, _cmbMaxresLineEdit);
475    enableWidget(true, _cmbSamplSpinBox);
476    enableWidget(true, _cmbUseGlonass);
477  }
478  else {
479    enableWidget(false, _cmbMethodComboBox);
480    enableWidget(false, _cmbMaxresLineEdit);
481    enableWidget(false, _cmbSamplSpinBox);
482    enableWidget(false, _cmbUseGlonass);
483  }
484
485  // Upload Results
486  // -------------
487  _uploadTable = new QTableWidget(0,12);
488  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
489  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
490  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
491  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
492  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
493  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
494  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
495  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
496  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
497  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
498  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
499  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
500  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
501  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
502  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
503  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
504  _uploadTable->horizontalHeader()->setStretchLastSection(true);
505  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
506
507  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
508          SLOT(slotBncTextChanged()));
509
510  QPushButton* addUploadRowButton = new QPushButton("Add Row");
511  QPushButton* delUploadRowButton = new QPushButton("Del Row");
512  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
513  _uploadIntrComboBox = new QComboBox;
514  _uploadIntrComboBox->setEditable(false);
515  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
516  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
517  if (ii != -1) {
518    _uploadIntrComboBox->setCurrentIndex(ii);
519  }
520
521  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
522  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
523
524  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
525  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
526  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
527  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
528  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
529  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
530  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
531
532  _uploadSamplSp3SpinBox = new QSpinBox;
533  _uploadSamplSp3SpinBox->setMinimum(0);
534  _uploadSamplSp3SpinBox->setMaximum(15);
535  _uploadSamplSp3SpinBox->setSingleStep(1);
536  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
537  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
538  _uploadSamplSp3SpinBox->setSuffix(" min");
539
540  _uploadSamplClkRnxSpinBox = new QSpinBox;
541  _uploadSamplClkRnxSpinBox->setMinimum(0);
542  _uploadSamplClkRnxSpinBox->setMaximum(60);
543  _uploadSamplClkRnxSpinBox->setSingleStep(5);
544  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
545  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
546  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
547
548  int iRowT = _uploadTable->rowCount();
549  if (iRowT > 0) {
550    enableWidget(true, _uploadIntrComboBox);
551    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
552    enableWidget(true, _uploadSamplSp3SpinBox);
553    enableWidget(true, _uploadSamplClkRnxSpinBox);
554    enableWidget(true, _uploadAntexFile);
555  }
556  else {
557    enableWidget(false, _uploadIntrComboBox);
558    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
559    enableWidget(false, _uploadSamplSp3SpinBox);
560    enableWidget(false, _uploadSamplClkRnxSpinBox);
561    enableWidget(false, _uploadAntexFile);
562  }
563
564  // Upload RTCM3 Ephemeris
565  // ----------------------
566  _uploadEphTable = new QTableWidget(0,6);
567  _uploadEphTable->setColumnCount(6);
568  _uploadEphTable->setRowCount(0);
569  _uploadEphTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, bytes").split(","));
570  _uploadEphTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
571  _uploadEphTable->setSelectionBehavior(QAbstractItemView::SelectRows);
572  _uploadEphTable->horizontalHeader()->resizeSection( 0,13*ww);
573  _uploadEphTable->horizontalHeader()->resizeSection( 1, 5*ww);
574  _uploadEphTable->horizontalHeader()->resizeSection( 2, 8*ww);
575  _uploadEphTable->horizontalHeader()->resizeSection( 3, 8*ww);
576  _uploadEphTable->horizontalHeader()->resizeSection( 4,10*ww);
577  _uploadEphTable->horizontalHeader()->resizeSection( 5,12*ww);
578  _uploadEphTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
579  _uploadEphTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
580
581  connect(_uploadEphTable, SIGNAL(itemSelectionChanged()),
582          SLOT(slotBncTextChanged()));
583
584  QPushButton* addUploadEphRowButton = new QPushButton("Add Row");
585  addUploadEphRowButton->setMaximumWidth(9*ww);
586  QPushButton* delUploadEphRowButton = new QPushButton("Del Row");
587  delUploadEphRowButton->setMaximumWidth(9*ww);
588
589  _uploadSamplRtcmEphSpinBox = new QSpinBox;
590  _uploadSamplRtcmEphSpinBox->setMinimum(0);
591  _uploadSamplRtcmEphSpinBox->setMaximum(60);
592  _uploadSamplRtcmEphSpinBox->setSingleStep(5);
593  _uploadSamplRtcmEphSpinBox->setMaximumWidth(9*ww);
594  _uploadSamplRtcmEphSpinBox->setValue(settings.value("uploadSamplRtcmEph").toInt());
595  _uploadSamplRtcmEphSpinBox->setSuffix(" sec");
596
597  iRowT = _uploadEphTable->rowCount();
598  if (iRowT > 0) {
599    enableWidget(true, _uploadSamplRtcmEphSpinBox);
600  }
601  else {
602    enableWidget(false, _uploadSamplRtcmEphSpinBox);
603  }
604
605  // Canvas with Editable Fields
606  // ---------------------------
607  _canvas = new QWidget;
608  setCentralWidget(_canvas);
609
610  _aogroup = new QTabWidget();
611  _aogroup->setElideMode(Qt::ElideNone);
612  _aogroup->setUsesScrollButtons(true);
613  QWidget* pgroup = new QWidget();
614  QWidget* ggroup = new QWidget();
615  QWidget* sgroup = new QWidget();
616  QWidget* egroup = new QWidget();
617  QWidget* agroup = new QWidget();
618  QWidget* cgroup = new QWidget();
619  QWidget* ogroup = new QWidget();
620  QWidget* rgroup = new QWidget();
621  QWidget* sergroup = new QWidget();
622  QWidget* pppGroup1 = new QWidget();
623  QWidget* pppGroup2 = new QWidget();
624  QWidget* pppGroup3 = new QWidget();
625  QWidget* pppGroup4 = new QWidget();
626  QWidget* reqcgroup = new QWidget();
627  QWidget* sp3CompGroup = new QWidget();
628  QWidget* cmbgroup = new QWidget();
629  QWidget* uploadgroup = new QWidget();
630  QWidget* uploadEphgroup = new QWidget();
631  _aogroup->addTab(pgroup,tr("Network"));
632  _aogroup->addTab(ggroup,tr("General"));
633  _aogroup->addTab(ogroup,tr("RINEX Observations"));
634  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
635  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
636  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
637  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
638  _aogroup->addTab(sgroup,tr("Feed Engine"));
639  _aogroup->addTab(sergroup,tr("Serial Output"));
640  _aogroup->addTab(agroup,tr("Outages"));
641  _aogroup->addTab(rgroup,tr("Miscellaneous"));
642  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
643  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
644  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
645  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
646  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
647  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
648  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
649
650  // Log Tab
651  // -------
652  _loggroup = new QTabWidget();
653  _loggroup->addTab(_log,tr("Log"));
654  _loggroup->addTab(_bncFigure,tr("Throughput"));
655  _loggroup->addTab(_bncFigureLate,tr("Latency"));
656  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
657
658  // Netowork (Proxy and SSL) Tab
659  // ----------------------------
660  QGridLayout* pLayout = new QGridLayout;
661  pLayout->setColumnMinimumWidth(0,13*ww);
662  _proxyPortLineEdit->setMaximumWidth(9*ww);
663
664  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
665  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
666  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
667  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
668  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
669  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
670  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
671  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
672  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
673  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
674  pLayout->addWidget(new QLabel(""),                                         5, 1);
675  pLayout->setRowStretch(6, 999);
676
677  pgroup->setLayout(pLayout);
678
679  // General Tab
680  // -----------
681  QGridLayout* gLayout = new QGridLayout;
682  gLayout->setColumnMinimumWidth(0,14*ww);
683  _onTheFlyComboBox->setMaximumWidth(9*ww);
684
685  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
686  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
687  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
688  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
689  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
690  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
691  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
692  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
693  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
694  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
695  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
696  gLayout->addWidget(new QLabel(""),                             6, 1);
697  gLayout->setRowStretch(7, 999);
698
699  ggroup->setLayout(gLayout);
700
701  // RINEX Observations
702  // ------------------
703  QGridLayout* oLayout = new QGridLayout;
704  oLayout->setColumnMinimumWidth(0,14*ww);
705  _rnxIntrComboBox->setMaximumWidth(9*ww);
706  _rnxSamplSpinBox->setMaximumWidth(9*ww);
707
708  _rnxV2Priority->setMaximumWidth(19*ww);
709
710  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
711  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
712  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
713  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
714  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
715  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
716  oLayout->addWidget(_rnxSamplSpinBox,                             2, 3, Qt::AlignLeft);
717  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
718  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
719  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
720  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
721  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
722  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
723  oLayout->addWidget(new QLabel("Version 2"),                      5, 0);
724  oLayout->addWidget(_rnxV2Priority,                               5, 1);
725  oLayout->addWidget(new QLabel("Signal priority"),                5, 2);
726  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
727  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
728  oLayout->addWidget(new QLabel("Version 3 filenames"),            6, 2);
729  oLayout->addWidget(_rnxV3filenameCheckBox,                       6, 3);
730  oLayout->addWidget(new QLabel(""),                               7, 1);
731  oLayout->setRowStretch(8, 999);
732
733  ogroup->setLayout(oLayout);
734
735  // RINEX Ephemeris
736  // ---------------
737  QGridLayout* eLayout = new QGridLayout;
738  eLayout->setColumnMinimumWidth(0,14*ww);
739  _ephIntrComboBox->setMaximumWidth(9*ww);
740  _ephOutPortLineEdit->setMaximumWidth(9*ww);
741
742  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
743  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
744  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
745  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
746  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
747  eLayout->addWidget(new QLabel("Port"),                          3, 0);
748  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
749  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
750  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
751  eLayout->addWidget(new QLabel("Version 3 filenames"),           4, 2);
752  eLayout->addWidget(_ephV3filenameCheckBox,                      4, 3);
753  eLayout->setRowStretch(5, 999);
754
755  egroup->setLayout(eLayout);
756
757
758  // Broadcast Corrections
759  // ---------------------
760  QGridLayout* cLayout = new QGridLayout;
761  cLayout->setColumnMinimumWidth(0,14*ww);
762  _corrIntrComboBox->setMaximumWidth(9*ww);
763  _corrPortLineEdit->setMaximumWidth(9*ww);
764
765  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
766  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
767  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
768  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
769  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
770  cLayout->addWidget(new QLabel("Port"),                          3, 0);
771  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
772  cLayout->addWidget(new QLabel(""),                              4, 1);
773  cLayout->setRowStretch(7, 999);
774  cgroup->setLayout(cLayout);
775
776  // Feed Engine
777  // -----------
778  QGridLayout* sLayout = new QGridLayout;
779  sLayout->setColumnMinimumWidth(0,14*ww);
780  _outPortLineEdit->setMaximumWidth(9*ww);
781  _outWaitSpinBox->setMaximumWidth(9*ww);
782  _outSamplSpinBox->setMaximumWidth(9*ww);
783  _outUPortLineEdit->setMaximumWidth(9*ww);
784
785  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
786  sLayout->addWidget(new QLabel("Port"),                            1, 0);
787  sLayout->addWidget(_outPortLineEdit,                              1, 1);
788  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
789  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
790  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
791  sLayout->addWidget(_outSamplSpinBox,                              2, 1, Qt::AlignLeft);
792  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
793  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
794  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
795  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
796  sLayout->addWidget(new QLabel(""),                                5, 1);
797  sLayout->setRowStretch(6, 999);
798
799  sgroup->setLayout(sLayout);
800
801  // Serial Output
802  // -------------
803  QGridLayout* serLayout = new QGridLayout;
804  serLayout->setColumnMinimumWidth(0,12*ww);
805  _serialBaudRateComboBox->setMaximumWidth(9*ww);
806  _serialFlowControlComboBox->setMaximumWidth(11*ww);
807  _serialDataBitsComboBox->setMaximumWidth(5*ww);
808  _serialParityComboBox->setMaximumWidth(9*ww);
809  _serialStopBitsComboBox->setMaximumWidth(5*ww);
810  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
811  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
812  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
813
814  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
815  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
816  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
817  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
818  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
819  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
820  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
821  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
822  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
823  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
824  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
825  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
826  serLayout->addWidget(_serialParityComboBox,                     4, 3);
827  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
828  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
829  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
830  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
831  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
832  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
833  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
834  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
835  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
836  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
837  serLayout->addWidget(new QLabel(""),                            6, 1);
838  serLayout->setRowStretch(7, 999);
839
840  sergroup->setLayout(serLayout);
841
842  // Outages
843  // -------
844  QGridLayout* aLayout = new QGridLayout;
845  aLayout->setColumnMinimumWidth(0,14*ww);
846  _adviseObsRateComboBox->setMaximumWidth(9*ww);
847  _adviseFailSpinBox->setMaximumWidth(9*ww);
848  _adviseRecoSpinBox->setMaximumWidth(9*ww);
849
850  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
851  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
852  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
853  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
854  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
855  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
856  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
857  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
858  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
859  aLayout->addWidget(new QLabel(""),                              5, 1);
860  aLayout->setRowStretch(6, 999);
861
862  agroup->setLayout(aLayout);
863
864  // Miscellaneous
865  // -------------
866  QGridLayout* rLayout = new QGridLayout;
867  rLayout->setColumnMinimumWidth(0,14*ww);
868  _miscIntrComboBox->setMaximumWidth(9*ww);
869  _miscPortLineEdit->setMaximumWidth(9*ww);
870
871  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
872  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
873  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
874  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
875  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
876  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
877  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
878  rLayout->addWidget(new QLabel("Port"),                          4, 0);
879  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
880  rLayout->addWidget(new QLabel(""),                              5, 1);
881  rLayout->setRowStretch(6, 999);
882
883  rgroup->setLayout(rLayout);
884
885  // PPP
886  // ---
887  _pppWidgets._dataSource->setMaximumWidth(20*ww);
888  _pppWidgets._corrMount->setMaximumWidth(20*ww);
889
890  _pppWidgets._corrFile->setMaximumWidth(35*ww);
891  _pppWidgets._crdFile->setMaximumWidth(35*ww);
892  _pppWidgets._logPath->setMaximumWidth(35*ww);
893  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
894  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
895  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
896  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
897
898  QGridLayout* pppLayout1 = new QGridLayout();
899  int ir = 0;
900  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
901  ++ir;
902  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
903  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
904  pppLayout1->addWidget(new QLabel("   RINEX Obs file"),     ir, 3);
905  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 4, 1, 3);
906  ++ir;
907  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
908  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
909  pppLayout1->addWidget(new QLabel("   RINEX Nav file"),     ir, 3);
910  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 4, 1, 3);
911  ++ir;
912  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 0);
913  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 1);
914  pppLayout1->addWidget(new QLabel("   ANTEX file"),         ir, 3);
915  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 4, 1, 3);
916  ++ir;
917  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
918  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
919  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 3);
920  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 4, 1, 3);
921  ++ir;
922  pppLayout1->addWidget(new QLabel("Logfile directory"),     ir, 0);
923  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 1);
924  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 3);
925  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 4, 1, 3);
926  ++ir;
927  pppLayout1->addWidget(new QLabel("SNX TRO directory"),     ir, 0);
928  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 1);
929  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 3);
930  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 4);
931  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 5);
932  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 6, Qt::AlignRight);
933  ++ir;
934  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 3);
935  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 4);
936  pppLayout1->addWidget(new QLabel("   SNX TRO solution")    ,ir, 5);
937  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 6, Qt::AlignRight);
938  pppLayout1->setRowStretch(ir, 999);
939
940  pppGroup1->setLayout(pppLayout1);
941
942  QVBoxLayout* pppLayout2 = new QVBoxLayout();
943  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
944  pppLayout2->addWidget(_pppWidgets._staTable, 99);
945  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
946  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
947  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
948  pppLayout2sub->addStretch(99);
949
950  pppLayout2->addLayout(pppLayout2sub);
951
952  pppGroup2->setLayout(pppLayout2);
953
954  QGridLayout* pppLayout3 = new QGridLayout();
955  ir = 0;
956  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
957  ++ir;
958  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
959  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
960  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
961  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
962  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
963  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
964  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
965  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
966  ++ir;
967  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
968  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
969  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
970  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
971  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
972  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
973  ++ir;
974  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
975  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
976  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
977  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
978  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
979  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
980  ++ir;
981  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
982  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
983  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
984  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
985  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
986  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
987  ++ir;
988  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
989  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
990  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
991  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
992  ++ir;
993  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
994  pppLayout3->setColumnStretch(8, 999);
995  ++ir;
996  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
997  pppLayout3->setRowStretch(ir, 999);
998
999  pppGroup3->setLayout(pppLayout3);
1000
1001  // ------------------------
1002  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
1003  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
1004  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
1005
1006  QGridLayout* pppLayout4 = new QGridLayout();
1007  ir = 0;
1008  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
1009  ++ir;
1010  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
1011  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
1012  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
1013  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
1014  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
1015
1016  ++ir;
1017  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
1018  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
1019  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
1020  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
1021  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
1022  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
1023  ++ir;
1024  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
1025  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
1026  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
1027  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
1028  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
1029  ++ir;
1030  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
1031  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
1032  ++ir;
1033  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
1034  pppLayout4->setRowStretch(ir, 999);
1035
1036  pppGroup4->setLayout(pppLayout4);
1037
1038  // Reqc Processing
1039  // ---------------
1040  _reqcActionComboBox = new QComboBox();
1041  _reqcActionComboBox->setEditable(false);
1042  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1043  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1044  if (ik != -1) {
1045    _reqcActionComboBox->setCurrentIndex(ik);
1046  }
1047  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1048          this, SLOT(slotBncTextChanged()));
1049
1050  QGridLayout* reqcLayout = new QGridLayout;
1051  _reqcActionComboBox->setMinimumWidth(15*ww);
1052  _reqcActionComboBox->setMaximumWidth(20*ww);
1053
1054  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1055  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1056
1057  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1058  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1059  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1060  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1061  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1062  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1063  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1064
1065  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1066          this, SLOT(slotBncTextChanged()));
1067
1068  _reqcLogSummaryOnly = new QCheckBox();
1069  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1070
1071  ir = 0;
1072  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1073  ++ir;
1074  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1075  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1076  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1077  _reqcEditOptionButton->setMinimumWidth(15*ww);
1078  _reqcEditOptionButton->setMaximumWidth(20*ww);
1079
1080  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1081  ++ir;
1082  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1083  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1084  _reqcObsFileChooser->setMaximumWidth(40*ww);
1085  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1086  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1087  _reqcNavFileChooser->setMaximumWidth(40*ww);
1088  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1089  ++ir;
1090  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1091  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1092  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1093  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1094  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1095  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1096  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1097  ++ir;
1098  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1099  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1100  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1101  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1102  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1103  ++ir;
1104  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1105  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1106  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1107  ++ir;
1108  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1109  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1110  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1111  ++ir;
1112  reqcLayout->setRowStretch(ir, 999);
1113
1114  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1115  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1116
1117  reqcgroup->setLayout(reqcLayout);
1118
1119  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1120          this, SLOT(slotReqcEditOption()));
1121
1122  QGridLayout* sp3CompLayout = new QGridLayout;
1123
1124  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1125  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1126  _sp3CompFileChooser->setMinimumWidth(15*ww);
1127  _sp3CompFileChooser->setMaximumWidth(40*ww);
1128
1129  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1130  _sp3CompExclude->setMinimumWidth(18*ww);
1131  _sp3CompExclude->setMaximumWidth(18*ww);
1132
1133  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1134  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1135  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1136
1137  ir = 0;
1138  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1139  ++ir;
1140  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1141  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1142  ++ir;
1143  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1144  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1145  ++ir;
1146  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1147  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1148  ++ir;
1149  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1150  ++ir;
1151  sp3CompLayout->setRowStretch(ir, 999);
1152
1153  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1154  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1155
1156  sp3CompGroup->setLayout(sp3CompLayout);
1157
1158  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1159          this, SLOT(slotBncTextChanged()));
1160
1161  // Combine Corrections
1162  // -------------------
1163  QGridLayout* cmbLayout = new QGridLayout;
1164
1165  populateCmbTable();
1166  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1167  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1168  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1169  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1170  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1171  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1172  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1173  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1174  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1175  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1176  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1177  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1178  cmbLayout->setRowStretch(7, 999);
1179
1180  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1181  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1182
1183  cmbgroup->setLayout(cmbLayout);
1184
1185  // Upload Layout (Clocks)
1186  // ----------------------
1187  QGridLayout* uploadHlpLayout = new QGridLayout();
1188
1189  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1190  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1191  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1192
1193  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1194  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1195  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1196  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1197  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1198  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1199  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1200  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1201  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1202  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1203  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1204  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1205  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1206
1207  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1208  populateUploadTable();
1209
1210  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1211  uploadLayout->addWidget(_uploadTable);
1212  uploadLayout->addLayout(uploadHlpLayout);
1213
1214  uploadgroup->setLayout(uploadLayout);
1215
1216  // Upload Layout (Ephemeris)
1217  // -------------------------
1218  QGridLayout* uploadHlpLayoutEph = new QGridLayout();
1219
1220  connect(addUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadEphRow()));
1221  connect(delUploadEphRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadEphRow()));
1222
1223  uploadHlpLayoutEph->addWidget(addUploadEphRowButton,               0, 0);
1224  uploadHlpLayoutEph->addWidget(delUploadEphRowButton,               0, 1);
1225  uploadHlpLayoutEph->addWidget(new QLabel("     Sampling"),         0, 2, Qt::AlignRight);
1226  uploadHlpLayoutEph->addWidget(_uploadSamplRtcmEphSpinBox,          0, 3);
1227
1228  QBoxLayout* uploadLayoutEph = new QBoxLayout(QBoxLayout::TopToBottom);
1229  populateUploadEphTable();
1230
1231  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"));
1232  uploadLayoutEph->addWidget(_uploadEphTable);
1233  uploadLayoutEph->addLayout(uploadHlpLayoutEph);
1234
1235  uploadEphgroup->setLayout(uploadLayoutEph);
1236
1237
1238  // Main Layout
1239  // -----------
1240  QGridLayout* mLayout = new QGridLayout;
1241  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1242  mLayout->addWidget(_aogroup,            0,0);
1243  mLayout->addWidget(_mountPointsTable,   1,0);
1244  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1245  mLayout->addWidget(_loggroup,           2,0);
1246
1247  _canvas->setLayout(mLayout);
1248
1249  // WhatsThis, Network
1250  // ------------------
1251  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1252  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1253  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1254  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.</p>"));
1255
1256  // WhatsThis, General
1257  // ------------------
1258  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1259  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1260  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1261  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1262  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1263
1264  // WhatsThis, RINEX Observations
1265  // -----------------------------
1266  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1267  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1268  _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files.</p>"));
1269  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. </p>"));
1270  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1271  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1272  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified either as equal for all systems or as system specific. The following are example priority strings:</li><ul><li>'CWPX_?' (Same signal priorities valid for all systems)</li><li>'G:CWPX_? R:PCX_? E:CPX_?' (Specific signal priorities for GPS, GLONASS and Galileo system)</li></ul>Default is priority list 'CWPX_?'.</p>"));
1273  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1274  _rnxV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1275
1276  // WhatsThis, RINEX Ephemeris
1277  // --------------------------
1278  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1279  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1280  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1281  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1282  _ephV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1283
1284  // WhatsThis, RINEX Editing & QC
1285  // -----------------------------
1286  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1287  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1288  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1289  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1290  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1291  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1292  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1293  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1294  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1295  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5'. Specifying an empty option string would be overruled by this default.</p>"));
1296
1297  // WhatsThis, SP3 Comparison
1298  // -------------------------
1299  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1300  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1301  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1302
1303  // WhatsThis, Broadcast Corrections
1304  // --------------------------------
1305  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1306  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1307  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1308
1309  // WhatsThis, Feed Engine
1310  // ----------------------
1311  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1312  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1313  _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1314  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1315  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1316
1317  // WhatsThis, Serial Output
1318  // ------------------------
1319  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1320  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1321  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1322  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1323  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1324  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1325  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1326  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1327  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1328  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1329  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1330
1331  // WhatsThis, Outages
1332  // ------------------
1333  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1334  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1335  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1336  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1337
1338  // WhatsThis, Miscellaneous
1339  // ------------------------
1340  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1341  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1342  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1343  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1344
1345  // WhatsThis, PPP (1)
1346  // ------------------
1347  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1348  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1349  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1350  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1351  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1352  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1353  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1354  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1355  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1356  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1357  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1358  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1359  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk.</p>"));
1360  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files.</p>"));
1361  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC.</p>"));
1362
1363  // WhatsThis, PPP (3)
1364  // ------------------
1365  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1366  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1367  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1368  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1369  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1370  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1371  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1372  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1373  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1374  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1375  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1376  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.</p>"));
1377
1378  // WhatsThis, Combine Corrections
1379  // ------------------------------
1380  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1381  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1382  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1383  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1384  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1385  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1386  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1387
1388  // WhatsThis, Upload Corrections
1389  // -----------------------------
1390  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1391  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1392  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Corrections' table.</p>"));
1393  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1394  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1395  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1396  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1397  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1398  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1399
1400  // WhatsThis, Upload Ephemeris
1401  // ---------------------------
1402  _uploadEphTable->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the respective stream.</p>"));
1403  addUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Ephemeris' table.</p>"));
1404  delUploadEphRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the 'Upload Ephemeris' table.</p>"));
1405  _uploadSamplRtcmEphSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1406
1407  // WhatsThis, Streams Canvas
1408  // -------------------------
1409  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1410  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1411  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1412  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1413  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1414  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1415
1416  // WhatsThis, Log Canvas
1417  // ---------------------
1418  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1419  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1420  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1421  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1422
1423
1424  // Enable/Disable all Widgets
1425  // --------------------------
1426  slotBncTextChanged();
1427  enableStartStop();
1428
1429  // Auto start
1430  // ----------
1431  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1432    slotStart();
1433  }
1434}
1435
1436// Destructor
1437////////////////////////////////////////////////////////////////////////////
1438bncWindow::~bncWindow() {
1439  if (_caster) {
1440    delete _caster; BNC_CORE->setCaster(0);
1441  }
1442  if (_casterEph) {
1443    delete _casterEph;
1444  }
1445  delete _bncFigureLate;
1446  delete _bncFigurePPP;
1447  delete _actHelp;
1448  delete _actAbout;
1449  delete _actFlowchart;
1450  delete _actFontSel;
1451  delete _actSaveOpt;
1452  delete _actQuit;
1453  delete _actAddMountPoints;
1454  delete _actDeleteMountPoints;
1455  delete _actMapMountPoints;
1456  delete _actStart;
1457  delete _actStop;
1458  delete _actwhatsthis;
1459  delete _proxyHostLineEdit;
1460  delete _proxyPortLineEdit;
1461  delete _sslCaCertPathLineEdit;
1462  delete _sslIgnoreErrorsCheckBox;
1463  delete _logFileLineEdit;
1464  delete _rawOutFileLineEdit;
1465  delete _rnxAppendCheckBox;
1466  delete _onTheFlyComboBox;
1467  delete _autoStartCheckBox;
1468  delete _rnxPathLineEdit;
1469  delete _rnxIntrComboBox;
1470  delete _rnxSamplSpinBox;
1471  delete _rnxFileCheckBox;
1472  delete _rnxSkelLineEdit;
1473  delete _rnxScrpLineEdit;
1474  delete _rnxV3CheckBox;
1475  delete _rnxV3filenameCheckBox;
1476  delete _rnxV2Priority;
1477  delete _ephPathLineEdit;
1478  delete _ephIntrComboBox;
1479  delete _ephOutPortLineEdit;
1480  delete _ephV3CheckBox;
1481  delete _ephV3filenameCheckBox;
1482  delete _corrPathLineEdit;
1483  delete _corrIntrComboBox;
1484  delete _corrPortLineEdit;
1485  delete _outPortLineEdit;
1486  delete _outWaitSpinBox;
1487  delete _outSamplSpinBox;
1488  delete _outFileLineEdit;
1489  delete _outUPortLineEdit;
1490  delete _serialMountPointLineEdit;
1491  delete _serialPortNameLineEdit;
1492  delete _serialBaudRateComboBox;
1493  delete _serialFlowControlComboBox;
1494  delete _serialDataBitsComboBox;
1495  delete _serialParityComboBox;
1496  delete _serialStopBitsComboBox;
1497  delete _serialAutoNMEAComboBox;
1498  delete _serialFileNMEALineEdit;
1499  delete _serialHeightNMEALineEdit;
1500  delete _serialManualNMEASamplingSpinBox;
1501  delete _adviseObsRateComboBox;
1502  delete _adviseFailSpinBox;
1503  delete _adviseRecoSpinBox;
1504  delete _adviseScriptLineEdit;
1505  delete _miscMountLineEdit;
1506  delete _miscPortLineEdit;
1507  delete _miscIntrComboBox;
1508  delete _miscScanRTCMCheckBox;
1509  _mountPointsTable->deleteLater();
1510  delete _log;
1511  delete _loggroup;
1512  _cmbTable->deleteLater();
1513  delete _cmbMaxresLineEdit;
1514  delete _cmbUseGlonass;
1515  delete _cmbSamplSpinBox;
1516  delete _cmbMethodComboBox;;
1517  _uploadEphTable->deleteLater();
1518  delete _uploadSamplRtcmEphCorrSpinBox;
1519  _uploadTable->deleteLater();
1520  delete _uploadIntrComboBox;
1521  delete _uploadAntexFile;
1522  delete _uploadSamplRtcmEphSpinBox;
1523  delete _uploadSamplSp3SpinBox;
1524  delete _uploadSamplClkRnxSpinBox;
1525  delete _reqcActionComboBox;
1526  delete _reqcObsFileChooser;
1527  delete _reqcNavFileChooser;
1528  delete _reqcOutObsLineEdit;
1529  delete _reqcOutNavLineEdit;
1530  delete _reqcOutLogLineEdit;
1531  delete _reqcPlotDirLineEdit;
1532  delete _reqcSkyPlotSignals;
1533  delete _reqcLogSummaryOnly;
1534  delete _reqcEditOptionButton;
1535  delete _sp3CompFileChooser;
1536  delete _sp3CompExclude;
1537  delete _sp3CompLogLineEdit;
1538  //delete _canvas;
1539}
1540
1541//
1542////////////////////////////////////////////////////////////////////////////
1543void bncWindow::populateMountPointsTable() {
1544
1545  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1546    _mountPointsTable->removeRow(iRow);
1547  }
1548
1549  bncSettings settings;
1550
1551  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1552  int iRow = 0;
1553  while (it.hasNext()) {
1554    QStringList hlp = it.next().split(" ");
1555    if (hlp.size() < 7) continue;
1556    _mountPointsTable->insertRow(iRow);
1557
1558    QUrl    url(hlp[0]);
1559
1560    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1561    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1562    QString nmea(hlp[5]);
1563    if (hlp[6] == "S") {
1564      fullPath = hlp[0].replace(0,2,"");
1565    }
1566    QString ntripVersion = "2";
1567    if (hlp.size() >= 7) {
1568      ntripVersion = (hlp[6]);
1569    }
1570
1571    QTableWidgetItem* it;
1572    it = new QTableWidgetItem(url.userInfo());
1573    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1574    _mountPointsTable->setItem(iRow, 0, it);
1575
1576    it = new QTableWidgetItem(fullPath);
1577    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1578    _mountPointsTable->setItem(iRow, 1, it);
1579
1580    it = new QTableWidgetItem(format);
1581    _mountPointsTable->setItem(iRow, 2, it);
1582
1583    it = new QTableWidgetItem(country);
1584    _mountPointsTable->setItem(iRow, 3, it);
1585
1586    if      (nmea == "yes") {
1587      it = new QTableWidgetItem(latitude);
1588      _mountPointsTable->setItem(iRow, 4, it);
1589      it = new QTableWidgetItem(longitude);
1590      _mountPointsTable->setItem(iRow, 5, it);
1591    } else {
1592      it = new QTableWidgetItem(latitude);
1593      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1594      _mountPointsTable->setItem(iRow, 4, it);
1595
1596      it = new QTableWidgetItem(longitude);
1597      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1598      _mountPointsTable->setItem(iRow, 5, it);
1599    }
1600
1601    it = new QTableWidgetItem(nmea);
1602    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1603    _mountPointsTable->setItem(iRow, 6, it);
1604
1605    it = new QTableWidgetItem(ntripVersion);
1606    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1607    _mountPointsTable->setItem(iRow, 7, it);
1608
1609    bncTableItem* bncIt = new bncTableItem();
1610    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1611    _mountPointsTable->setItem(iRow, 8, bncIt);
1612
1613    iRow++;
1614  }
1615
1616  _mountPointsTable->sortItems(1);
1617
1618  enableStartStop();
1619}
1620
1621// Retrieve Table
1622////////////////////////////////////////////////////////////////////////////
1623void bncWindow::slotAddMountPoints() {
1624
1625  bncSettings settings;
1626  QString proxyHost = settings.value("proxyHost").toString();
1627  int     proxyPort = settings.value("proxyPort").toInt();
1628  if (proxyHost != _proxyHostLineEdit->text()         ||
1629      proxyPort != _proxyPortLineEdit->text().toInt()) {
1630    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1631                                     "changed. Use the new ones?",
1632                                     QMessageBox::Yes, QMessageBox::No,
1633                                     QMessageBox::NoButton);
1634    if      (iRet == QMessageBox::Yes) {
1635      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1636      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1637    }
1638  }
1639
1640  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1641  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1642
1643  QMessageBox msgBox;
1644  msgBox.setIcon(QMessageBox::Question);
1645  msgBox.setWindowTitle("Add Stream");
1646  msgBox.setText("Add stream(s) coming from:");
1647
1648  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1649  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1650  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1651  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1652  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1653
1654  msgBox.exec();
1655
1656  if (msgBox.clickedButton() == buttonNtrip) {
1657    bncTableDlg* dlg = new bncTableDlg(this);
1658    dlg->move(this->pos().x()+50, this->pos().y()+50);
1659    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1660          this, SLOT(slotNewMountPoints(QStringList*)));
1661    dlg->exec();
1662    delete dlg;
1663  } else if (msgBox.clickedButton() == buttonIP) {
1664    bncIpPort* ipp = new bncIpPort(this);
1665    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1666          this, SLOT(slotNewMountPoints(QStringList*)));
1667    ipp->exec();
1668    delete ipp;
1669  } else if (msgBox.clickedButton() == buttonUDP) {
1670    bncUdpPort* udp = new bncUdpPort(this);
1671    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1672          this, SLOT(slotNewMountPoints(QStringList*)));
1673    udp->exec();
1674    delete udp;
1675  } else if (msgBox.clickedButton() == buttonSerial) {
1676    bncSerialPort* sep = new bncSerialPort(this);
1677    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1678          this, SLOT(slotNewMountPoints(QStringList*)));
1679    sep->exec();
1680    delete sep;
1681  } else if (msgBox.clickedButton() == buttonCancel) {
1682    // Cancel
1683  }
1684
1685  enableStartStop();
1686}
1687
1688// Delete Selected Mount Points
1689////////////////////////////////////////////////////////////////////////////
1690void bncWindow::slotDeleteMountPoints() {
1691
1692  int nRows = _mountPointsTable->rowCount();
1693  bool flg[nRows];
1694  for (int iRow = 0; iRow < nRows; iRow++) {
1695    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1696      flg[iRow] = true;
1697    }
1698    else {
1699      flg[iRow] = false;
1700    }
1701  }
1702  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1703    if (flg[iRow]) {
1704      _mountPointsTable->removeRow(iRow);
1705    }
1706  }
1707  _actDeleteMountPoints->setEnabled(false);
1708
1709  enableStartStop();
1710}
1711
1712// New Mount Points Selected
1713////////////////////////////////////////////////////////////////////////////
1714void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1715  int iRow = 0;
1716  QListIterator<QString> it(*mountPoints);
1717  while (it.hasNext()) {
1718    QStringList hlp = it.next().split(" ");
1719    QUrl    url(hlp[0]);
1720    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1721    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1722    QString nmea(hlp[5]);
1723    if (hlp[6] == "S") {
1724      fullPath = hlp[0].replace(0,2,"");
1725    }
1726    QString ntripVersion = "2";
1727    if (hlp.size() >= 7) {
1728      ntripVersion = (hlp[6]);
1729    }
1730
1731    _mountPointsTable->insertRow(iRow);
1732
1733    QTableWidgetItem* it;
1734    it = new QTableWidgetItem(url.userInfo());
1735    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1736    _mountPointsTable->setItem(iRow, 0, it);
1737
1738    it = new QTableWidgetItem(fullPath);
1739    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1740    _mountPointsTable->setItem(iRow, 1, it);
1741
1742    it = new QTableWidgetItem(format);
1743    _mountPointsTable->setItem(iRow, 2, it);
1744
1745    it = new QTableWidgetItem(country);
1746    _mountPointsTable->setItem(iRow, 3, it);
1747
1748    if      (nmea == "yes") {
1749    it = new QTableWidgetItem(latitude);
1750    _mountPointsTable->setItem(iRow, 4, it);
1751    it = new QTableWidgetItem(longitude);
1752    _mountPointsTable->setItem(iRow, 5, it);
1753    } else {
1754    it = new QTableWidgetItem(latitude);
1755    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1756    _mountPointsTable->setItem(iRow, 4, it);
1757    it = new QTableWidgetItem(longitude);
1758    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1759    _mountPointsTable->setItem(iRow, 5, it);
1760    }
1761
1762    it = new QTableWidgetItem(nmea);
1763    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1764    _mountPointsTable->setItem(iRow, 6, it);
1765
1766    it = new QTableWidgetItem(ntripVersion);
1767    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1768    _mountPointsTable->setItem(iRow, 7, it);
1769
1770    bncTableItem* bncIt = new bncTableItem();
1771    _mountPointsTable->setItem(iRow, 8, bncIt);
1772
1773    iRow++;
1774  }
1775  _mountPointsTable->hideColumn(0);
1776  _mountPointsTable->hideColumn(3);
1777  _mountPointsTable->sortItems(1);
1778  delete mountPoints;
1779
1780  enableStartStop();
1781}
1782
1783// Save Options (serialize)
1784////////////////////////////////////////////////////////////////////////////
1785void bncWindow::slotSaveOptions() {
1786  saveOptions();
1787  bncSettings settings;
1788  settings.sync();
1789}
1790
1791// Save Options (memory only)
1792////////////////////////////////////////////////////////////////////////////
1793void bncWindow::saveOptions() {
1794
1795  QStringList mountPoints;
1796  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1797
1798    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1799      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1800                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1801
1802      mountPoints.append(url.toString() + " " +
1803                         _mountPointsTable->item(iRow, 2)->text()
1804                 + " " + _mountPointsTable->item(iRow, 3)->text()
1805                 + " " + _mountPointsTable->item(iRow, 4)->text()
1806                 + " " + _mountPointsTable->item(iRow, 5)->text()
1807                 + " " + _mountPointsTable->item(iRow, 6)->text()
1808                 + " " + _mountPointsTable->item(iRow, 7)->text());
1809    } else {
1810      mountPoints.append(
1811                  "//" + _mountPointsTable->item(iRow, 1)->text()
1812                 + " " + _mountPointsTable->item(iRow, 2)->text()
1813                 + " " + _mountPointsTable->item(iRow, 3)->text()
1814                 + " " + _mountPointsTable->item(iRow, 4)->text()
1815                 + " " + _mountPointsTable->item(iRow, 5)->text()
1816                 + " " + _mountPointsTable->item(iRow, 6)->text()
1817                 + " " + _mountPointsTable->item(iRow, 7)->text());
1818    }
1819  }
1820
1821  QStringList cmbStreams;
1822  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1823    QString hlp;
1824    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1825      if (_cmbTable->item(iRow, iCol)) {
1826        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1827      }
1828    }
1829    if (!hlp.isEmpty()) {
1830      cmbStreams << hlp;
1831    }
1832  }
1833
1834  QStringList uploadMountpointsOut;
1835  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1836    QString hlp;
1837    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1838      if (_uploadTable->cellWidget(iRow, iCol) &&
1839          (iCol == 3 || iCol == 4 || iCol == 5)) {
1840        if      (iCol == 3) {
1841          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1842          hlp += passwd->text() + ",";
1843        }
1844        else if (iCol == 4) {
1845          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1846          hlp += system->currentText() + ",";
1847        }
1848        else if (iCol == 5) {
1849          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1850          QString state; state.setNum(com->checkState());
1851          hlp +=  state + ",";
1852        }
1853      }
1854      else if (_uploadTable->item(iRow, iCol)) {
1855        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1856      }
1857    }
1858    if (!hlp.isEmpty()) {
1859      uploadMountpointsOut << hlp;
1860    }
1861  }
1862
1863  QStringList uploadEphMountpointsOut;
1864  for (int iRow = 0; iRow < _uploadEphTable->rowCount(); iRow++) {
1865    QString hlp;
1866    for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
1867      if (_uploadEphTable->cellWidget(iRow, iCol) &&
1868          (iCol == 3 || iCol == 4)) {
1869        if      (iCol == 3) {
1870          QLineEdit* passwd = (QLineEdit*)(_uploadEphTable->cellWidget(iRow, iCol));
1871          hlp += passwd->text() + ",";
1872        }
1873        else if (iCol == 4) {
1874          QComboBox* system = (QComboBox*)(_uploadEphTable->cellWidget(iRow, iCol));
1875          hlp += system->currentText() + ",";
1876        }
1877      }
1878      else if (_uploadEphTable->item(iRow, iCol)) {
1879        hlp += _uploadEphTable->item(iRow, iCol)->text() + ",";
1880      }
1881    }
1882    if (!hlp.isEmpty()) {
1883      uploadEphMountpointsOut << hlp;
1884    }
1885  }
1886
1887  bncSettings settings;
1888
1889  settings.setValue("startTab",    _aogroup->currentIndex());
1890  settings.setValue("statusTab",   _loggroup->currentIndex());
1891  settings.setValue("mountPoints", mountPoints);
1892// Network
1893  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1894  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1895  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1896  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1897// General
1898  settings.setValue("logFile",     _logFileLineEdit->text());
1899  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1900  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1901  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1902  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1903// RINEX Observations
1904  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1905  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1906  settings.setValue("rnxSampl",    _rnxSamplSpinBox->value());
1907  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1908  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1909  settings.setValue("rnxV3filenames",_rnxV3filenameCheckBox->checkState());
1910  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1911  (_rnxV3filenameCheckBox->checkState()) ?
1912    settings.setValue("rnxV3",       _rnxV3filenameCheckBox->checkState()) :
1913    settings.setValue("rnxV3",       _rnxV3CheckBox->checkState());
1914  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1915// RINEX Ephemeris
1916  settings.setValue("ephPath",       _ephPathLineEdit->text());
1917  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1918  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1919  settings.setValue("ephV3filenames", _ephV3filenameCheckBox->checkState());
1920  (_ephV3filenameCheckBox->checkState()) ?
1921    settings.setValue("ephV3",       _ephV3filenameCheckBox->checkState()) :
1922    settings.setValue("ephV3",       _ephV3CheckBox->checkState());
1923// Broadcast Corrections
1924  settings.setValue("corrPath",    _corrPathLineEdit->text());
1925  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1926  settings.setValue("corrPort",    _corrPortLineEdit->text());
1927// Feed Engine
1928  settings.setValue("outPort",     _outPortLineEdit->text());
1929  settings.setValue("outWait",     _outWaitSpinBox->value());
1930  settings.setValue("outSampl",    _outSamplSpinBox->value());
1931  settings.setValue("outFile",     _outFileLineEdit->text());
1932  settings.setValue("outUPort",    _outUPortLineEdit->text());
1933// Serial Output
1934  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1935  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1936  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1937  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1938  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1939  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1940  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1941  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1942  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1943  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1944  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1945// Outages
1946  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1947  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1948  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1949  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1950// Miscellaneous
1951  settings.setValue("miscMount",   _miscMountLineEdit->text());
1952  settings.setValue("miscPort",    _miscPortLineEdit->text());
1953  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1954  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1955// Reqc
1956  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1957  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1958  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1959  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1960  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1961  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1962  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1963  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1964  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1965// SP3 Comparison
1966  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
1967  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
1968  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1969// Combine Corrections
1970  if (!cmbStreams.isEmpty()) {
1971    settings.setValue("cmbStreams", cmbStreams);
1972  }
1973  else {
1974    settings.setValue("cmbStreams", "");
1975  }
1976  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
1977  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
1978  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
1979  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1980// Upload Corrections
1981  if (!uploadMountpointsOut.isEmpty()) {
1982    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1983  }
1984  else {
1985    settings.setValue("uploadMountpointsOut", "");
1986  }
1987  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
1988  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1989  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
1990  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
1991  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
1992// Upload Ephemeris
1993  if (!uploadEphMountpointsOut.isEmpty()) {
1994    settings.setValue("uploadEphMountpointsOut", uploadEphMountpointsOut);
1995  }
1996  else {
1997    settings.setValue("uploadEphMountpointsOut", "");
1998  }
1999  settings.setValue("uploadSamplRtcmEph", _uploadSamplRtcmEphSpinBox->value());
2000
2001  if (_caster) {
2002    _caster->readMountPoints();
2003  }
2004
2005  _pppWidgets.saveOptions();
2006}
2007
2008// All get slots terminated
2009////////////////////////////////////////////////////////////////////////////
2010void bncWindow::slotGetThreadsFinished() {
2011  BNC_CORE->slotMessage("All Get Threads Terminated", true);
2012  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2013  delete _casterEph; _casterEph = 0;
2014  _runningRealTime = false;
2015}
2016
2017// Start It!
2018////////////////////////////////////////////////////////////////////////////
2019void bncWindow::slotStart() {
2020  saveOptions();
2021  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
2022    _runningPPP = true;
2023    enableStartStop();
2024    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
2025    BNC_CORE->startPPP();
2026    _bncFigurePPP->reset();
2027  }
2028  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
2029    if (_reqcActionComboBox->currentText() == "Analyze") {
2030      _runningQC = true;
2031      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
2032      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2033      reqcAnalyze->start();
2034    }
2035    else {
2036      _runningEdit = true;
2037      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2038      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2039      reqcEdit->start();
2040    }
2041    enableStartStop();
2042  }
2043  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
2044    _runningSp3Comp = true;
2045    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2046    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2047    sp3Comp->start();
2048    enableStartStop();
2049  }
2050  else {
2051    startRealTime();
2052    BNC_CORE->startPPP();
2053  }
2054}
2055
2056// Start Real-Time (Retrieve Data etc.)
2057////////////////////////////////////////////////////////////////////////////
2058void bncWindow::startRealTime() {
2059
2060  _runningRealTime = true;
2061
2062  _bncFigurePPP->reset();
2063
2064  _actDeleteMountPoints->setEnabled(false);
2065
2066  enableStartStop();
2067
2068  _caster = new bncCaster();
2069
2070  BNC_CORE->setCaster(_caster);
2071  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2072  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2073  BNC_CORE->initCombination();
2074
2075  connect(_caster, SIGNAL(getThreadsFinished()),
2076          this, SLOT(slotGetThreadsFinished()));
2077
2078  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2079           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2080
2081  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION" ("BNC_OS") ==========", true);
2082
2083  bncSettings settings;
2084
2085  // Active panels
2086  // -------------
2087  if (!_rnxPathLineEdit->text().isEmpty())
2088      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2089  if (!_ephPathLineEdit->text().isEmpty())
2090      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2091  if (!_corrPathLineEdit->text().isEmpty())
2092      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2093  if (!_outPortLineEdit->text().isEmpty())
2094      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2095  if (!_serialMountPointLineEdit->text().isEmpty())
2096      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2097  if (!_adviseObsRateComboBox->currentText().isEmpty())
2098      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2099  if (!_miscMountLineEdit->text().isEmpty())
2100      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2101  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2102      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2103  if (_cmbTable->rowCount() > 0)
2104      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2105  if (_uploadTable->rowCount() > 0)
2106      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2107  if (_uploadEphTable->rowCount() > 0)
2108      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2109
2110  QDir rnxdir(settings.value("rnxPath").toString());
2111  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2112
2113  QString rnx_file = settings.value("rnxScript").toString();
2114  if ( !rnx_file.isEmpty() ) {
2115    QFile rnxfile(settings.value("rnxScript").toString());
2116    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2117  }
2118
2119  QDir ephdir(settings.value("ephPath").toString());
2120  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2121
2122  QDir corrdir(settings.value("corrPath").toString());
2123  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2124
2125  QString advise_file = settings.value("adviseScript").toString();
2126  if ( !advise_file.isEmpty() ) {
2127    QFile advisefile(settings.value("adviseScript").toString());
2128    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2129  }
2130
2131  _caster->readMountPoints();
2132
2133  _casterEph = new bncEphUploadCaster();
2134}
2135
2136// Retrieve Data
2137////////////////////////////////////////////////////////////////////////////
2138void bncWindow::slotStop() {
2139  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2140                                   QMessageBox::Yes, QMessageBox::No,
2141                                   QMessageBox::NoButton);
2142  if (iRet == QMessageBox::Yes) {
2143    BNC_CORE->stopPPP();
2144    BNC_CORE->stopCombination();
2145    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2146    delete _casterEph; _casterEph = 0;
2147    _runningRealTime = false;
2148    _runningPPP      = false;
2149    enableStartStop();
2150  }
2151}
2152
2153// Close Application gracefully
2154////////////////////////////////////////////////////////////////////////////
2155void bncWindow::closeEvent(QCloseEvent* event) {
2156
2157  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2158                                   QMessageBox::Yes, QMessageBox::No,
2159                                   QMessageBox::Cancel);
2160
2161  if      (iRet == QMessageBox::Cancel) {
2162    event->ignore();
2163    return;
2164  }
2165  else if (iRet == QMessageBox::Yes) {
2166    slotSaveOptions();
2167  }
2168
2169  BNC_CORE->stopPPP();
2170
2171  QMainWindow::closeEvent(event);
2172}
2173
2174// User changed the selection of mountPoints
2175////////////////////////////////////////////////////////////////////////////
2176void bncWindow::slotSelectionChanged() {
2177  if (_mountPointsTable->selectedItems().isEmpty()) {
2178    _actDeleteMountPoints->setEnabled(false);
2179  }
2180  else {
2181    _actDeleteMountPoints->setEnabled(true);
2182  }
2183}
2184
2185// Display Program Messages
2186////////////////////////////////////////////////////////////////////////////
2187void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2188  if (showOnScreen ) {
2189    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2190  }
2191}
2192
2193// About Message
2194////////////////////////////////////////////////////////////////////////////
2195void bncWindow::slotAbout() {
2196 new bncAboutDlg(0);
2197}
2198
2199//Flowchart
2200////////////////////////////////////////////////////////////////////////////
2201void bncWindow::slotFlowchart() {
2202 new bncFlowchartDlg(0);
2203}
2204
2205// Help Window
2206////////////////////////////////////////////////////////////////////////////
2207void bncWindow::slotHelp() {
2208  QUrl url;
2209  url.setPath(":bnchelp.html");
2210  new bncHlpDlg(0, url);
2211}
2212
2213// Select Fonts
2214////////////////////////////////////////////////////////////////////////////
2215void bncWindow::slotFontSel() {
2216  bool ok;
2217  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2218  if (ok) {
2219    bncSettings settings;
2220    settings.setValue("font", newFont.toString());
2221    QApplication::setFont(newFont);
2222    int ww = QFontMetrics(newFont).width('w');
2223    setMinimumSize(60*ww, 80*ww);
2224    resize(60*ww, 80*ww);
2225  }
2226}
2227
2228// Whats This Help
2229void bncWindow::slotWhatsThis() {
2230  QWhatsThis::enterWhatsThisMode();
2231}
2232
2233//
2234////////////////////////////////////////////////////////////////////////////
2235void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2236  _threads = threads;
2237
2238  _bncFigure->updateMountPoints();
2239  _bncFigureLate->updateMountPoints();
2240
2241  populateMountPointsTable();
2242  bncSettings settings;
2243  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2244  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2245  QListIterator<bncGetThread*> iTh(threads);
2246  while (iTh.hasNext()) {
2247    bncGetThread* thread = iTh.next();
2248    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2249      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2250                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2251      if (url                                      == thread->mountPoint() &&
2252          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2253          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2254        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2255        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2256                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2257        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2258                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2259        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2260                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2261        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2262                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2263        break;
2264      }
2265    }
2266  }
2267}
2268
2269//
2270////////////////////////////////////////////////////////////////////////////
2271void bncWindow::CreateMenu() {
2272  // Create Menus
2273  // ------------
2274  _menuFile = menuBar()->addMenu(tr("&File"));
2275  _menuFile->addAction(_actFontSel);
2276  _menuFile->addSeparator();
2277  _menuFile->addAction(_actSaveOpt);
2278  _menuFile->addSeparator();
2279  _menuFile->addAction(_actQuit);
2280
2281  _menuHlp = menuBar()->addMenu(tr("&Help"));
2282  _menuHlp->addAction(_actHelp);
2283  _menuHlp->addAction(_actFlowchart);
2284  _menuHlp->addAction(_actAbout);
2285}
2286
2287// Toolbar
2288////////////////////////////////////////////////////////////////////////////
2289void bncWindow::AddToolbar() {
2290  QToolBar* toolBar = new QToolBar;
2291  addToolBar(Qt::BottomToolBarArea, toolBar);
2292  toolBar->setMovable(false);
2293  toolBar->addAction(_actAddMountPoints);
2294  toolBar->addAction(_actDeleteMountPoints);
2295  toolBar->addAction(_actMapMountPoints);
2296  toolBar->addAction(_actStart);
2297  toolBar->addAction(_actStop);
2298  toolBar->addWidget(new QLabel("                                           "));
2299  toolBar->addAction(_actwhatsthis);
2300}
2301
2302// About
2303////////////////////////////////////////////////////////////////////////////
2304bncAboutDlg::bncAboutDlg(QWidget* parent) :
2305   QDialog(parent) {
2306
2307  QTextBrowser* tb = new QTextBrowser;
2308  QUrl url; url.setPath(":bncabout.html");
2309  tb->setSource(url);
2310  tb->setReadOnly(true);
2311
2312  int ww = QFontMetrics(font()).width('w');
2313  QPushButton* _closeButton = new QPushButton("Close");
2314  _closeButton->setMaximumWidth(10*ww);
2315  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2316
2317  QGridLayout* dlgLayout = new QGridLayout();
2318  QLabel* img = new QLabel();
2319  img->setPixmap(QPixmap(":ntrip-logo.png"));
2320  dlgLayout->addWidget(img, 0,0);
2321  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2322  dlgLayout->addWidget(tb,1,0,1,2);
2323  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2324
2325  setLayout(dlgLayout);
2326  resize(60*ww, 60*ww);
2327  setWindowTitle("About BNC");
2328  show();
2329}
2330
2331//
2332////////////////////////////////////////////////////////////////////////////
2333bncAboutDlg::~bncAboutDlg() {
2334
2335};
2336
2337// Flowchart
2338////////////////////////////////////////////////////////////////////////////
2339bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2340   QDialog(parent) {
2341
2342  int ww = QFontMetrics(font()).width('w');
2343  QPushButton* _closeButton = new QPushButton("Close");
2344  _closeButton->setMaximumWidth(10*ww);
2345  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2346
2347  QGridLayout* dlgLayout = new QGridLayout();
2348  QLabel* img = new QLabel();
2349  img->setPixmap(QPixmap(":bncflowchart.png"));
2350  dlgLayout->addWidget(img, 0,0);
2351  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2352
2353  setLayout(dlgLayout);
2354  setWindowTitle("Flow Chart");
2355  show();
2356}
2357
2358//
2359////////////////////////////////////////////////////////////////////////////
2360bncFlowchartDlg::~bncFlowchartDlg() {
2361};
2362
2363// Enable/Disable Widget (and change its color)
2364////////////////////////////////////////////////////////////////////////////
2365void bncWindow::enableWidget(bool enable, QWidget* widget) {
2366
2367  const static QPalette paletteWhite(QColor(255, 255, 255));
2368  const static QPalette paletteGray(QColor(230, 230, 230));
2369
2370  widget->setEnabled(enable);
2371  if (enable) {
2372    widget->setPalette(paletteWhite);
2373  }
2374  else {
2375    widget->setPalette(paletteGray);
2376  }
2377}
2378
2379//  Bnc Text
2380////////////////////////////////////////////////////////////////////////////
2381void bncWindow::slotBncTextChanged(){
2382
2383  const static QPalette paletteWhite(QColor(255, 255, 255));
2384  const static QPalette paletteGray(QColor(230, 230, 230));
2385
2386  bool enable = true;
2387
2388  // Proxy
2389  //------
2390  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2391    enable = !_proxyHostLineEdit->text().isEmpty();
2392    enableWidget(enable, _proxyPortLineEdit);
2393  }
2394
2395  // RINEX Observations
2396  // ------------------
2397  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2398    enable = !_rnxPathLineEdit->text().isEmpty();
2399    enableWidget(enable, _rnxIntrComboBox);
2400    enableWidget(enable, _rnxSamplSpinBox);
2401    enableWidget(enable, _rnxSkelLineEdit);
2402    enableWidget(enable, _rnxFileCheckBox);
2403    enableWidget(enable, _rnxScrpLineEdit);
2404    enableWidget(enable, _rnxV2Priority);
2405    enableWidget(enable, _rnxV3CheckBox);
2406
2407    bool enable1 = true;
2408    enable1 = _rnxV3CheckBox->isChecked();
2409    if (enable && enable1) {
2410    enableWidget(false, _rnxV2Priority);
2411    }
2412    if (enable && !enable1) {
2413    enableWidget(true, _rnxV2Priority);
2414    }
2415  }
2416
2417  // RINEX Observations, Signal Priority
2418  // -----------------------------------
2419  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2420    if (!_rnxPathLineEdit->text().isEmpty()) {
2421      enableWidget(enable, _rnxIntrComboBox);
2422      enable = !_rnxV3CheckBox->isChecked();
2423      enableWidget(enable, _rnxV2Priority);
2424    }
2425  }
2426
2427  // RINEX Ephemeris
2428  // ---------------
2429  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2430    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2431    enableWidget(enable, _ephIntrComboBox);
2432    enableWidget(enable, _ephV3CheckBox);
2433    enableWidget(enable, _ephV3filenameCheckBox);
2434  }
2435
2436  // Broadcast Corrections
2437  // ---------------------
2438  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2439    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2440    enableWidget(enable, _corrIntrComboBox);
2441  }
2442
2443  // Feed Engine
2444  // -----------
2445  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2446    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2447    enableWidget(enable, _outWaitSpinBox);
2448    enableWidget(enable, _outSamplSpinBox);
2449  }
2450
2451  // Serial Output
2452  // -------------
2453  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2454      sender() == _serialAutoNMEAComboBox) {
2455    enable = !_serialMountPointLineEdit->text().isEmpty();
2456    enableWidget(enable, _serialPortNameLineEdit);
2457    enableWidget(enable, _serialBaudRateComboBox);
2458    enableWidget(enable, _serialParityComboBox);
2459    enableWidget(enable, _serialDataBitsComboBox);
2460    enableWidget(enable, _serialStopBitsComboBox);
2461    enableWidget(enable, _serialFlowControlComboBox);
2462    enableWidget(enable, _serialAutoNMEAComboBox);
2463    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2464    enableWidget(enable2, _serialFileNMEALineEdit);
2465    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2466    enableWidget(enable3, _serialHeightNMEALineEdit);
2467    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2468  }
2469
2470  // Outages
2471  // -------
2472  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2473    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2474    enableWidget(enable, _adviseFailSpinBox);
2475    enableWidget(enable, _adviseRecoSpinBox);
2476    enableWidget(enable, _adviseScriptLineEdit);
2477  }
2478
2479  // Miscellaneous
2480  // -------------
2481  if (sender() == 0 || sender() == _miscMountLineEdit) {
2482    enable = !_miscMountLineEdit->text().isEmpty();
2483    enableWidget(enable, _miscIntrComboBox);
2484    enableWidget(enable, _miscScanRTCMCheckBox);
2485    enableWidget(enable, _miscPortLineEdit);
2486  }
2487
2488  // Combine Corrections
2489  // -------------------
2490  if (sender() == 0 || sender() == _cmbTable) {
2491    int iRow = _cmbTable->rowCount();
2492    if (iRow > 0) {
2493      enableWidget(true, _cmbMethodComboBox);
2494      enableWidget(true, _cmbMaxresLineEdit);
2495      enableWidget(true, _cmbSamplSpinBox);
2496      enableWidget(true, _cmbUseGlonass);
2497    }
2498    else {
2499      enableWidget(false, _cmbMethodComboBox);
2500      enableWidget(false, _cmbMaxresLineEdit);
2501      enableWidget(false, _cmbSamplSpinBox);
2502      enableWidget(false, _cmbUseGlonass);
2503    }
2504  }
2505
2506  // Upload(clk)
2507  // -----------
2508  int iRow = _uploadTable->rowCount();
2509  if (iRow > 0) {
2510    enableWidget(true, _uploadIntrComboBox);
2511    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2512    enableWidget(true, _uploadSamplClkRnxSpinBox);
2513    enableWidget(true, _uploadSamplSp3SpinBox);
2514    enableWidget(true, _uploadAntexFile);
2515  }
2516  else {
2517    enableWidget(false, _uploadIntrComboBox);
2518    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2519    enableWidget(false, _uploadSamplClkRnxSpinBox);
2520    enableWidget(false, _uploadSamplSp3SpinBox);
2521    enableWidget(false, _uploadAntexFile);
2522  }
2523
2524  // Upload(eph)
2525  // -----------
2526  iRow = _uploadEphTable->rowCount();
2527  if (iRow > 0) {
2528    enableWidget(true, _uploadSamplRtcmEphSpinBox);
2529  }
2530  else {
2531    enableWidget(false, _uploadSamplRtcmEphSpinBox);
2532  }
2533
2534  // QC
2535  // --
2536  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2537    enable = !_reqcActionComboBox->currentText().isEmpty();
2538    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2539//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2540    enableWidget(enable,                            _reqcObsFileChooser);
2541    enableWidget(enable,                            _reqcNavFileChooser);
2542    enableWidget(enable,                            _reqcOutLogLineEdit);
2543    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2544    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2545    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2546    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2547    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2548//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2549    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2550  }
2551
2552  // SP3 File Comparison
2553  // -------------------
2554  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2555    enable = !_sp3CompFileChooser->fileName().isEmpty();
2556    enableWidget(enable, _sp3CompLogLineEdit);
2557    enableWidget(enable, _sp3CompExclude);
2558  }
2559
2560  enableStartStop();
2561}
2562
2563//
2564////////////////////////////////////////////////////////////////////////////
2565void bncWindow::slotAddCmbRow() {
2566  int iRow = _cmbTable->rowCount();
2567  _cmbTable->insertRow(iRow);
2568  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2569    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2570  }
2571}
2572
2573//
2574////////////////////////////////////////////////////////////////////////////
2575void bncWindow::slotDelCmbRow() {
2576
2577  const static QPalette paletteWhite(QColor(255, 255, 255));
2578  const static QPalette paletteGray(QColor(230, 230, 230));
2579
2580  int nRows = _cmbTable->rowCount();
2581  bool flg[nRows];
2582  for (int iRow = 0; iRow < nRows; iRow++) {
2583    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2584      flg[iRow] = true;
2585    }
2586    else {
2587      flg[iRow] = false;
2588    }
2589  }
2590  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2591    if (flg[iRow]) {
2592      _cmbTable->removeRow(iRow);
2593    }
2594  }
2595  nRows = _cmbTable->rowCount();
2596  if (nRows < 1) {
2597    enableWidget(false, _cmbMethodComboBox);
2598    enableWidget(false, _cmbMaxresLineEdit);
2599    enableWidget(false, _cmbSamplSpinBox);
2600    enableWidget(false, _cmbUseGlonass);
2601  }
2602}
2603
2604//
2605////////////////////////////////////////////////////////////////////////////
2606void bncWindow::populateCmbTable() {
2607
2608  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2609    _cmbTable->removeRow(iRow);
2610  }
2611
2612  bncSettings settings;
2613
2614  int iRow = -1;
2615  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2616  while (it.hasNext()) {
2617    QStringList hlp = it.next().split(" ");
2618    if (hlp.size() > 2) {
2619      ++iRow;
2620      _cmbTable->insertRow(iRow);
2621    }
2622    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2623      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2624    }
2625  }
2626}
2627
2628//
2629////////////////////////////////////////////////////////////////////////////
2630void bncWindow::slotAddUploadRow() {
2631  int iRow = _uploadTable->rowCount();
2632  _uploadTable->insertRow(iRow);
2633  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2634    if      (iCol == 3) {
2635      QLineEdit* passwd = new QLineEdit();
2636      passwd->setFrame(false);
2637      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2638      _uploadTable->setCellWidget(iRow, iCol, passwd);
2639    }
2640    else if (iCol == 4) {
2641      QComboBox* system = new QComboBox();
2642      system->setEditable(false);
2643      system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2644      system->setFrame(false);
2645      _uploadTable->setCellWidget(iRow, iCol, system);
2646    }
2647    else if (iCol == 5) {
2648      QCheckBox* com = new QCheckBox();
2649      _uploadTable->setCellWidget(iRow, iCol, com);
2650    }
2651    else if (iCol == 11) {
2652      bncTableItem* bncIt = new bncTableItem();
2653      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2654      _uploadTable->setItem(iRow, iCol, bncIt);
2655      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2656    }
2657    else {
2658      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2659    }
2660  }
2661}
2662
2663//
2664////////////////////////////////////////////////////////////////////////////
2665void bncWindow::slotDelUploadRow() {
2666  BNC_CORE->_uploadTableItems.clear();
2667  int nRows = _uploadTable->rowCount();
2668  bool flg[nRows];
2669  for (int iRow = 0; iRow < nRows; iRow++) {
2670    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2671      flg[iRow] = true;
2672    }
2673    else {
2674      flg[iRow] = false;
2675    }
2676  }
2677  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2678    if (flg[iRow]) {
2679      _uploadTable->removeRow(iRow);
2680    }
2681  }
2682  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2683    BNC_CORE->_uploadTableItems[iRow] =
2684                                (bncTableItem*) _uploadTable->item(iRow, 11);
2685  }
2686  nRows = _uploadTable->rowCount();
2687  if (nRows < 1) {
2688    enableWidget(false, _uploadIntrComboBox);
2689    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2690    enableWidget(false, _uploadSamplSp3SpinBox);
2691    enableWidget(false, _uploadSamplClkRnxSpinBox);
2692    enableWidget(false, _uploadAntexFile);
2693  }
2694}
2695
2696//
2697////////////////////////////////////////////////////////////////////////////
2698void bncWindow::populateUploadTable() {
2699  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2700    _uploadTable->removeRow(iRow);
2701  }
2702
2703  bncSettings settings;
2704
2705  int iRow = -1;
2706  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2707  while (it.hasNext()) {
2708    QStringList hlp = it.next().split(",");
2709    if (hlp.size() > 6) {
2710      ++iRow;
2711      _uploadTable->insertRow(iRow);
2712    }
2713    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2714      if      (iCol == 3) {
2715        QLineEdit* passwd = new QLineEdit();
2716        passwd->setFrame(false);
2717        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2718        passwd->setText(hlp[iCol]);
2719        _uploadTable->setCellWidget(iRow, iCol, passwd);
2720      }
2721      else if (iCol == 4) {
2722        QComboBox* system = new QComboBox();
2723        system->setEditable(false);
2724        system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2725        system->setFrame(false);
2726        system->setCurrentIndex(system->findText(hlp[iCol]));
2727        _uploadTable->setCellWidget(iRow, iCol, system);
2728      }
2729      else if (iCol == 5) {
2730        QCheckBox* com = new QCheckBox();
2731        if (hlp[iCol].toInt() == Qt::Checked) {
2732          com->setCheckState(Qt::Checked);
2733        }
2734        _uploadTable->setCellWidget(iRow, iCol, com);
2735      }
2736      else if (iCol == 11) {
2737        bncTableItem* bncIt = new bncTableItem();
2738        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2739        _uploadTable->setItem(iRow, iCol, bncIt);
2740        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2741      }
2742      else {
2743        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2744      }
2745    }
2746  }
2747}
2748
2749//
2750////////////////////////////////////////////////////////////////////////////
2751void bncWindow::slotSetUploadTrafo() {
2752  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2753  dlg->exec();
2754  delete dlg;
2755}
2756
2757//
2758////////////////////////////////////////////////////////////////////////////
2759void bncWindow::slotAddUploadEphRow() {
2760  int iRow = _uploadEphTable->rowCount();
2761  _uploadEphTable->insertRow(iRow);
2762  for (int iCol = 0; iCol < _uploadEphTable->columnCount(); iCol++) {
2763    if      (iCol == 3) {
2764      QLineEdit* passwd = new QLineEdit();
2765      passwd->setFrame(false);
2766      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2767      _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2768    }
2769    else if (iCol == 4) {
2770      QComboBox* system = new QComboBox();
2771      system->setEditable(false);
2772      system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2773      system->setFrame(false);
2774      _uploadEphTable->setCellWidget(iRow, iCol, system);
2775    }
2776    else if (iCol == 5) {
2777      bncTableItem* bncIt = new bncTableItem();
2778      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2779      _uploadEphTable->setItem(iRow, iCol, bncIt);
2780      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2781    }
2782    else {
2783      _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2784    }
2785  }
2786}
2787
2788//
2789////////////////////////////////////////////////////////////////////////////
2790void bncWindow::slotDelUploadEphRow() {
2791  BNC_CORE->_uploadTableItems.clear();
2792  int nRows = _uploadEphTable->rowCount();
2793  bool flg[nRows];
2794  for (int iRow = 0; iRow < nRows; iRow++) {
2795    if (_uploadEphTable->isItemSelected(_uploadEphTable->item(iRow,1))) {
2796      flg[iRow] = true;
2797    }
2798    else {
2799      flg[iRow] = false;
2800    }
2801  }
2802  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2803    if (flg[iRow]) {
2804      _uploadEphTable->removeRow(iRow);
2805    }
2806  }
2807  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2808    BNC_CORE->_uploadTableItems[iRow] =
2809                                (bncTableItem*) _uploadEphTable->item(iRow, 5);
2810  }
2811  nRows = _uploadEphTable->rowCount();
2812  if (nRows < 1) {
2813    enableWidget(false, _uploadSamplRtcmEphSpinBox);
2814  }
2815}
2816
2817//
2818////////////////////////////////////////////////////////////////////////////
2819void bncWindow::populateUploadEphTable() {
2820  for (int iRow = _uploadEphTable->rowCount()-1; iRow >=0; iRow--) {
2821    _uploadEphTable->removeRow(iRow);
2822  }
2823
2824  bncSettings settings;
2825
2826  int iRow = -1;
2827  QListIterator<QString> it(settings.value("uploadEphMountpointsOut").toStringList());
2828  while (it.hasNext()) {
2829    QStringList hlp = it.next().split(",");
2830    if (hlp.size() > 4) {
2831      ++iRow;
2832      _uploadEphTable->insertRow(iRow);
2833    }
2834    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2835      if      (iCol == 3) {
2836        QLineEdit* passwd = new QLineEdit();
2837        passwd->setFrame(false);
2838        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2839        passwd->setText(hlp[iCol]);
2840        _uploadEphTable->setCellWidget(iRow, iCol, passwd);
2841      }
2842      else if (iCol == 4) {
2843        QComboBox* system = new QComboBox();
2844        system->setEditable(false);
2845        system->addItems(QString("ALL,GPS,GLONASS,Galileo,BDS,QZSS,SBAS").split(","));
2846        system->setFrame(false);
2847        system->setCurrentIndex(system->findText(hlp[iCol]));
2848        _uploadEphTable->setCellWidget(iRow, iCol, system);
2849      }
2850      else if (iCol == 5) {
2851        bncTableItem* bncIt = new bncTableItem();
2852        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2853        _uploadEphTable->setItem(iRow, iCol, bncIt);
2854        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2855      }
2856      else {
2857        _uploadEphTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2858      }
2859    }
2860  }
2861}
2862
2863
2864// Progress Bar Change
2865////////////////////////////////////////////////////////////////////////////
2866void bncWindow::slotPostProcessingProgress(int nEpo) {
2867  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2868}
2869
2870// Post-Processing Reqc Finished
2871////////////////////////////////////////////////////////////////////////////
2872void bncWindow::slotPostProcessingFinished() {
2873  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2874  _runningPPP     = false;
2875  _runningEdit    = false;
2876  _runningQC      = false;
2877  _runningSp3Comp = false;
2878  _actStart->setText(tr("Sta&rt"));
2879  enableStartStop();
2880}
2881
2882// Edit teqc-like editing options
2883////////////////////////////////////////////////////////////////////////////
2884void bncWindow::slotReqcEditOption() {
2885  saveOptions();
2886  reqcDlg* dlg = new reqcDlg(this);
2887  dlg->move(this->pos().x()+50, this->pos().y()+50);
2888  dlg->exec();
2889  delete dlg;
2890}
2891
2892// Enable/Disable Start and Stop Buttons
2893////////////////////////////////////////////////////////////////////////////
2894void bncWindow::enableStartStop() {
2895  if ( running() ) {
2896    _actStart->setEnabled(false);
2897    if (_runningRealTime || _runningPPP) {
2898      _actStop->setEnabled(true);
2899    }
2900  }
2901  else {
2902    _actStart->setEnabled(true);
2903    _actStop->setEnabled(false);
2904  }
2905}
2906
2907// Show Map
2908////////////////////////////////////////////////////////////////////////////
2909void bncWindow::slotMapMountPoints() {
2910  saveOptions();
2911  t_bncMap* bncMap = new t_bncMap(this);
2912  bncMap->setMinimumSize(800, 600);
2913  bncMap->setWindowTitle("Selected Mountpoints");
2914
2915  bncSettings settings;
2916  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2917  while (it.hasNext()) {
2918    QStringList hlp = it.next().split(" ");
2919    if (hlp.size() < 5) continue;
2920    QUrl   url(hlp[0]);
2921    double latDeg = hlp[2].toDouble();
2922    double lonDeg = hlp[3].toDouble();
2923    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2924  }
2925
2926  bncMap->show();
2927}
2928
2929// Show Map
2930////////////////////////////////////////////////////////////////////////////
2931void bncWindow::slotMapPPP() {
2932#ifdef QT_WEBKIT
2933  saveOptions();
2934  enableWidget(false, _pppWidgets._mapWinButton);
2935  enableWidget(false, _pppWidgets._useGoogleMap);
2936  enableWidget(false, _pppWidgets._useOpenStreetMap);
2937  enableWidget(false, _pppWidgets._mapWinDotSize);
2938  enableWidget(false, _pppWidgets._mapWinDotColor);
2939
2940  if (!_mapWin) {
2941    _mapWin = new bncMapWin(this);
2942    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2943    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2944            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2945  }
2946  _mapWin->show();
2947#else
2948  QMessageBox::information(this, "Information",
2949                           "Qt Library compiled without QtWebKit");
2950#endif
2951}
2952
2953// Show Map
2954////////////////////////////////////////////////////////////////////////////
2955void bncWindow::slotMapPPPClosed() {
2956#ifdef QT_WEBKIT
2957  enableWidget(true, _pppWidgets._mapWinButton);
2958  enableWidget(true, _pppWidgets._useGoogleMap);
2959  enableWidget(true, _pppWidgets._useOpenStreetMap);
2960  enableWidget(true, _pppWidgets._mapWinDotSize);
2961  enableWidget(true, _pppWidgets._mapWinDotColor);
2962  if (_mapWin) {
2963    QListIterator<bncGetThread*> it(_threads);
2964    while (it.hasNext()) {
2965      bncGetThread* thread = it.next();
2966      thread->disconnect(_mapWin);
2967    }
2968    _mapWin->deleteLater();
2969    _mapWin = 0;
2970  }
2971#endif
2972}
Note: See TracBrowser for help on using the repository browser.