source: ntrip/trunk/BNC/src/bncwindow.cpp @ 7668

Last change on this file since 7668 was 7668, checked in by weber, 4 years ago

Documentation completed

File size: 149.3 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70#  include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83  const static QPalette paletteWhite(QColor(255, 255, 255));
84  const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87  BNC_CORE->setConfFileName("");
88#endif
89
90  _caster    = 0;
91  _casterEph = 0;
92
93  _bncFigure     = new bncFigure(this);
94  _bncFigureLate = new bncFigureLate(this);
95  _bncFigurePPP  = new bncFigurePPP(this);
96
97  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
102
103  _runningRealTime    = false;
104  _runningPPP         = false;
105  _runningEdit        = false;
106  _runningQC          = false;
107  _runningSp3Comp     = false;
108  _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110  _mapWin = 0;
111
112  int ww = QFontMetrics(this->font()).width('w');
113
114  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116  setMinimumSize(100*ww, 70*ww);
117
118  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121          this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123  // Create Actions
124  // --------------
125  _actHelp = new QAction(tr("&Help Contents"),this);
126  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128  _actAbout = new QAction(tr("&About BNC"),this);
129  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131  _actFlowchart = new QAction(tr("&Flow Chart"),this);
132  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134  _actFontSel = new QAction(tr("Select &Font"),this);
135  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140  _actQuit  = new QAction(tr("&Quit"),this);
141  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148  _actDeleteMountPoints->setEnabled(false);
149
150  _actMapMountPoints = new QAction(tr("&Map"),this);
151  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153  _actStart = new QAction(tr("Sta&rt"),this);
154  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156  _actStop = new QAction(tr("Sto&p"),this);
157  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158
159  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
160  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
161
162  CreateMenu();
163  AddToolbar();
164
165  bncSettings settings;
166
167  // Network Options
168  // ---------------
169  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
170  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
171
172  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
173          this, SLOT(slotBncTextChanged()));
174
175  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
176  _sslIgnoreErrorsCheckBox = new QCheckBox();
177  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
178                                          settings.value("sslIgnoreErrors").toInt()));
179
180  // General Options
181  // ---------------
182  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
183  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
184  _rnxAppendCheckBox  = new QCheckBox();
185  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
186                                    settings.value("rnxAppend").toInt()));
187  _onTheFlyComboBox = new QComboBox();
188  _onTheFlyComboBox->setEditable(false);
189  _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
190  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
191  if (ii != -1) {
192    _onTheFlyComboBox->setCurrentIndex(ii);
193  }
194  _autoStartCheckBox  = new QCheckBox();
195  _autoStartCheckBox->setCheckState(Qt::CheckState(
196                                    settings.value("autoStart").toInt()));
197
198  // RINEX Observations Options
199  // --------------------------
200  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
201  _rnxIntrComboBox    = new QComboBox();
202  _rnxIntrComboBox->setEditable(false);
203  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
205  if (ii != -1) {
206    _rnxIntrComboBox->setCurrentIndex(ii);
207  }
208  _rnxSamplSpinBox    = new QSpinBox();
209  _rnxSamplSpinBox->setMinimum(0);
210  _rnxSamplSpinBox->setMaximum(60);
211  _rnxSamplSpinBox->setSingleStep(5);
212  _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
213  _rnxFileCheckBox = new QCheckBox();
214  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
215  _rnxSamplSpinBox->setSuffix(" sec");
216  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
217  _rnxSkelLineEdit->setMaximumWidth(5*ww);
218  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
219  _rnxV3CheckBox      = new QCheckBox();
220  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
221  _rnxV3filenameCheckBox = new QCheckBox();
222  _rnxV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3filenames").toInt()));
223  QString hlp = settings.value("rnxV2Priority").toString();
224  if (hlp.isEmpty()) {
225    hlp = "CWPX_?";
226  }
227  _rnxV2Priority = new QLineEdit(hlp);
228
229  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
230          this, SLOT(slotBncTextChanged()));
231  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
232          this, SLOT(slotBncTextChanged()));
233
234  // RINEX Ephemeris Options
235  // -----------------------
236  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
237  _ephIntrComboBox    = new QComboBox();
238  _ephIntrComboBox->setEditable(false);
239  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
240  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
241  if (jj != -1) {
242    _ephIntrComboBox->setCurrentIndex(jj);
243  }
244  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
245  _ephV3CheckBox = new QCheckBox();
246  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
247
248  _ephV3filenameCheckBox = new QCheckBox();
249  _ephV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("ephV3filenames").toInt()));
250
251  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
252          this, SLOT(slotBncTextChanged()));
253
254  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
255          this, SLOT(slotBncTextChanged()));
256
257  // Broadcast Corrections Options
258  // -----------------------------
259  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
260  _corrIntrComboBox    = new QComboBox();
261  _corrIntrComboBox->setEditable(false);
262  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
263  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
264  if (mm != -1) {
265    _corrIntrComboBox->setCurrentIndex(mm);
266  }
267  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
268
269  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
270          this, SLOT(slotBncTextChanged()));
271
272  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
273          this, SLOT(slotBncTextChanged()));
274
275  // Feed Engine Options
276  // -------------------
277  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
278  _outWaitSpinBox   = new QSpinBox();
279  _outWaitSpinBox->setMinimum(1);
280  _outWaitSpinBox->setMaximum(30);
281  _outWaitSpinBox->setSingleStep(1);
282  _outWaitSpinBox->setSuffix(" sec");
283  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
284  _outSamplSpinBox    = new QSpinBox();
285  _outSamplSpinBox->setMinimum(0);
286  _outSamplSpinBox->setMaximum(60);
287  _outSamplSpinBox->setSingleStep(5);
288  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
289  _outSamplSpinBox->setSuffix(" sec");
290  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
291  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
292
293  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
294          this, SLOT(slotBncTextChanged()));
295
296  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
297          this, SLOT(slotBncTextChanged()));
298
299  // Serial Output Options
300  // ---------------------
301  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
302  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
303  _serialBaudRateComboBox = new QComboBox();
304  _serialBaudRateComboBox->addItems(QString("110,300,600,"
305            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
306  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
307  if (kk != -1) {
308    _serialBaudRateComboBox->setCurrentIndex(kk);
309  }
310  _serialFlowControlComboBox = new QComboBox();
311  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
312  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
313  if (kk != -1) {
314    _serialFlowControlComboBox->setCurrentIndex(kk);
315  }
316  _serialDataBitsComboBox = new QComboBox();
317  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
318  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
319  if (kk != -1) {
320    _serialDataBitsComboBox->setCurrentIndex(kk);
321  }
322  _serialParityComboBox   = new QComboBox();
323  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
324  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
325  if (kk != -1) {
326    _serialParityComboBox->setCurrentIndex(kk);
327  }
328  _serialStopBitsComboBox = new QComboBox();
329  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
330  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
331  if (kk != -1) {
332    _serialStopBitsComboBox->setCurrentIndex(kk);
333  }
334  _serialAutoNMEAComboBox  = new QComboBox();
335  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
336  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
337  if (kk != -1) {
338    _serialAutoNMEAComboBox->setCurrentIndex(kk);
339  }
340  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
341  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
342
343  _serialManualNMEASamplingSpinBox = new QSpinBox();
344  _serialManualNMEASamplingSpinBox->setMinimum(0);
345  _serialManualNMEASamplingSpinBox->setMaximum(300);
346  _serialManualNMEASamplingSpinBox->setSingleStep(10);
347  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
348  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
349
350  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
351          this, SLOT(slotBncTextChanged()));
352
353  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
354          this, SLOT(slotBncTextChanged()));
355
356  // Outages Options
357  // ---------------
358  _adviseObsRateComboBox    = new QComboBox();
359  _adviseObsRateComboBox->setEditable(false);
360  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
361  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
362  if (kk != -1) {
363    _adviseObsRateComboBox->setCurrentIndex(kk);
364  }
365  _adviseFailSpinBox = new QSpinBox();
366  _adviseFailSpinBox->setMinimum(0);
367  _adviseFailSpinBox->setMaximum(60);
368  _adviseFailSpinBox->setSingleStep(1);
369  _adviseFailSpinBox->setSuffix(" min");
370  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
371  _adviseRecoSpinBox = new QSpinBox();
372  _adviseRecoSpinBox->setMinimum(0);
373  _adviseRecoSpinBox->setMaximum(60);
374  _adviseRecoSpinBox->setSingleStep(1);
375  _adviseRecoSpinBox->setSuffix(" min");
376  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
377  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
378
379  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
380          this, SLOT(slotBncTextChanged()));
381
382  // Miscellaneous Options
383  // ---------------------
384  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
385  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
386  _miscIntrComboBox   = new QComboBox();
387  _miscIntrComboBox->setEditable(false);
388  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
389  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
390  if (ll != -1) {
391    _miscIntrComboBox->setCurrentIndex(ll);
392  }
393  _miscScanRTCMCheckBox  = new QCheckBox();
394  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
395                                    settings.value("miscScanRTCM").toInt()));
396
397  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
398          this, SLOT(slotBncTextChanged()));
399
400  // Streams
401  // -------
402  _mountPointsTable   = new QTableWidget(0,9);
403
404  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
405  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
406  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
407  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
408  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
409  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
410  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
411  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
412  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
413  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
414  _mountPointsTable->setHorizontalHeaderLabels(labels);
415  _mountPointsTable->setGridStyle(Qt::NoPen);
416  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
417  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
418  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
419  _mountPointsTable->hideColumn(0);
420  _mountPointsTable->hideColumn(3);
421  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
422          SLOT(slotSelectionChanged()));
423  populateMountPointsTable();
424
425  _log = new QTextEdit();
426  _log->setReadOnly(true);
427  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
428  _log->setFont(msFont);
429  _log->document()->setMaximumBlockCount(1000);
430
431  // Combine Corrections
432  // -------------------
433  _cmbTable = new QTableWidget(0,3);
434  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
435  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
436  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
437  _cmbTable->setMaximumWidth(30*ww);
438  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
439  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
440  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
441  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
442  _cmbTable->horizontalHeader()->setStretchLastSection(true);
443  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
444
445  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
446  _cmbUseGlonass     = new QCheckBox();
447  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
448
449  _cmbSamplSpinBox = new QSpinBox;
450  _cmbSamplSpinBox->setMinimum(10);
451  _cmbSamplSpinBox->setMaximum(60);
452  _cmbSamplSpinBox->setSingleStep(10);
453  _cmbSamplSpinBox->setMaximumWidth(9*ww);
454  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
455  _cmbSamplSpinBox->setSuffix(" sec");
456
457  QPushButton* addCmbRowButton = new QPushButton("Add Row");
458  QPushButton* delCmbRowButton = new QPushButton("Delete");
459
460  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
461          SLOT(slotBncTextChanged()));
462
463  _cmbMethodComboBox = new QComboBox();
464  _cmbMethodComboBox->setEditable(false);
465  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
466  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
467  if (im != -1) {
468    _cmbMethodComboBox->setCurrentIndex(im);
469  }
470
471  int iRow = _cmbTable->rowCount();
472  if (iRow > 0) {
473    enableWidget(true, _cmbMethodComboBox);
474    enableWidget(true, _cmbMaxresLineEdit);
475    enableWidget(true, _cmbSamplSpinBox);
476    enableWidget(true, _cmbUseGlonass);
477  }
478  else {
479    enableWidget(false, _cmbMethodComboBox);
480    enableWidget(false, _cmbMaxresLineEdit);
481    enableWidget(false, _cmbSamplSpinBox);
482    enableWidget(false, _cmbUseGlonass);
483  }
484
485  // Upload Results
486  // -------------
487  _uploadTable = new QTableWidget(0,12);
488  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
489  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
490  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
491  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
492  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
493  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
494  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
495  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
496  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
497  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
498  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
499  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
500  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
501  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
502  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
503  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
504  _uploadTable->horizontalHeader()->setStretchLastSection(true);
505  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
506
507  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
508          SLOT(slotBncTextChanged()));
509
510  QPushButton* addUploadRowButton = new QPushButton("Add Row");
511  QPushButton* delUploadRowButton = new QPushButton("Del Row");
512  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
513  _uploadIntrComboBox = new QComboBox;
514  _uploadIntrComboBox->setEditable(false);
515  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
516  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
517  if (ii != -1) {
518    _uploadIntrComboBox->setCurrentIndex(ii);
519  }
520
521  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
522  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
523
524  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
525  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
526  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
527  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
528  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
529  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
530  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
531
532  _uploadSamplSp3SpinBox = new QSpinBox;
533  _uploadSamplSp3SpinBox->setMinimum(0);
534  _uploadSamplSp3SpinBox->setMaximum(15);
535  _uploadSamplSp3SpinBox->setSingleStep(1);
536  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
537  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
538  _uploadSamplSp3SpinBox->setSuffix(" min");
539
540  _uploadSamplClkRnxSpinBox = new QSpinBox;
541  _uploadSamplClkRnxSpinBox->setMinimum(0);
542  _uploadSamplClkRnxSpinBox->setMaximum(60);
543  _uploadSamplClkRnxSpinBox->setSingleStep(5);
544  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
545  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
546  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
547
548  int iRowT = _uploadTable->rowCount();
549  if (iRowT > 0) {
550    enableWidget(true, _uploadIntrComboBox);
551    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
552    enableWidget(true, _uploadSamplSp3SpinBox);
553    enableWidget(true, _uploadSamplClkRnxSpinBox);
554    enableWidget(true, _uploadAntexFile);
555  }
556  else {
557    enableWidget(false, _uploadIntrComboBox);
558    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
559    enableWidget(false, _uploadSamplSp3SpinBox);
560    enableWidget(false, _uploadSamplClkRnxSpinBox);
561    enableWidget(false, _uploadAntexFile);
562  }
563
564  // Upload RTCM3 Ephemeris
565  // ----------------------
566  _uploadEphHostLineEdit       = new QLineEdit(settings.value("uploadEphHost").toString());
567  _uploadEphPortLineEdit       = new QLineEdit(settings.value("uploadEphPort").toString());
568  _uploadEphPasswordLineEdit   = new QLineEdit(settings.value("uploadEphPassword").toString());
569  _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
570  _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
571  _uploadEphSampleSpinBox      = new QSpinBox;
572  _uploadEphSampleSpinBox->setMinimum(5);
573  _uploadEphSampleSpinBox->setMaximum(60);
574  _uploadEphSampleSpinBox->setSingleStep(5);
575  _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
576  _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
577  _uploadEphSampleSpinBox->setSuffix(" sec");
578  _uploadEphBytesCounter       = new bncBytesCounter;
579
580  // Canvas with Editable Fields
581  // ---------------------------
582  _canvas = new QWidget;
583  setCentralWidget(_canvas);
584
585  _aogroup = new QTabWidget();
586  _aogroup->setElideMode(Qt::ElideNone);
587  _aogroup->setUsesScrollButtons(true);
588  QWidget* pgroup = new QWidget();
589  QWidget* ggroup = new QWidget();
590  QWidget* sgroup = new QWidget();
591  QWidget* egroup = new QWidget();
592  QWidget* agroup = new QWidget();
593  QWidget* cgroup = new QWidget();
594  QWidget* ogroup = new QWidget();
595  QWidget* rgroup = new QWidget();
596  QWidget* sergroup = new QWidget();
597  QWidget* pppGroup1 = new QWidget();
598  QWidget* pppGroup2 = new QWidget();
599  QWidget* pppGroup3 = new QWidget();
600  QWidget* pppGroup4 = new QWidget();
601  QWidget* reqcgroup = new QWidget();
602  QWidget* sp3CompGroup = new QWidget();
603  QWidget* cmbgroup = new QWidget();
604  QWidget* uploadgroup = new QWidget();
605  QWidget* uploadEphgroup = new QWidget();
606  _aogroup->addTab(pgroup,tr("Network"));
607  _aogroup->addTab(ggroup,tr("General"));
608  _aogroup->addTab(ogroup,tr("RINEX Observations"));
609  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
610  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
611  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
612  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
613  _aogroup->addTab(sgroup,tr("Feed Engine"));
614  _aogroup->addTab(sergroup,tr("Serial Output"));
615  _aogroup->addTab(agroup,tr("Outages"));
616  _aogroup->addTab(rgroup,tr("Miscellaneous"));
617  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
618  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
619  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
620  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
621  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
622  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
623  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
624
625  // Log Tab
626  // -------
627  _loggroup = new QTabWidget();
628  _loggroup->addTab(_log,tr("Log"));
629  _loggroup->addTab(_bncFigure,tr("Throughput"));
630  _loggroup->addTab(_bncFigureLate,tr("Latency"));
631  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
632
633  // Netowork (Proxy and SSL) Tab
634  // ----------------------------
635  QGridLayout* pLayout = new QGridLayout;
636  pLayout->setColumnMinimumWidth(0,13*ww);
637  _proxyPortLineEdit->setMaximumWidth(9*ww);
638
639  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
640  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
641  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
642  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
643  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
644  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
645  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
646  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
647  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
648  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
649  pLayout->addWidget(new QLabel(""),                                         5, 1);
650  pLayout->setRowStretch(6, 999);
651
652  pgroup->setLayout(pLayout);
653
654  // General Tab
655  // -----------
656  QGridLayout* gLayout = new QGridLayout;
657  gLayout->setColumnMinimumWidth(0,14*ww);
658  _onTheFlyComboBox->setMaximumWidth(9*ww);
659
660  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
661  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
662  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
663  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
664  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
665  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
666  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
667  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
668  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
669  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
670  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
671  gLayout->addWidget(new QLabel(""),                             6, 1);
672  gLayout->setRowStretch(7, 999);
673
674  ggroup->setLayout(gLayout);
675
676  // RINEX Observations
677  // ------------------
678  QGridLayout* oLayout = new QGridLayout;
679  oLayout->setColumnMinimumWidth(0,14*ww);
680  _rnxIntrComboBox->setMaximumWidth(9*ww);
681  _rnxSamplSpinBox->setMaximumWidth(9*ww);
682
683  _rnxV2Priority->setMaximumWidth(19*ww);
684
685  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
686  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
687  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
688  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
689  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
690  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
691  oLayout->addWidget(_rnxSamplSpinBox,                             2, 3, Qt::AlignLeft);
692  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
693  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
694  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
695  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
696  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
697  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
698  oLayout->addWidget(new QLabel("Version 2"),                      5, 0);
699  oLayout->addWidget(_rnxV2Priority,                               5, 1);
700  oLayout->addWidget(new QLabel("Signal priority"),                5, 2);
701  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
702  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
703  oLayout->addWidget(new QLabel("Version 3 filenames"),            6, 2);
704  oLayout->addWidget(_rnxV3filenameCheckBox,                       6, 3);
705  oLayout->addWidget(new QLabel(""),                               7, 1);
706  oLayout->setRowStretch(8, 999);
707
708  ogroup->setLayout(oLayout);
709
710  // RINEX Ephemeris
711  // ---------------
712  QGridLayout* eLayout = new QGridLayout;
713  eLayout->setColumnMinimumWidth(0,14*ww);
714  _ephIntrComboBox->setMaximumWidth(9*ww);
715  _ephOutPortLineEdit->setMaximumWidth(9*ww);
716
717  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
718  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
719  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
720  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
721  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
722  eLayout->addWidget(new QLabel("Port"),                          3, 0);
723  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
724  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
725  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
726  eLayout->addWidget(new QLabel("Version 3 filenames"),           4, 2);
727  eLayout->addWidget(_ephV3filenameCheckBox,                      4, 3);
728  eLayout->setRowStretch(5, 999);
729
730  egroup->setLayout(eLayout);
731
732
733  // Broadcast Corrections
734  // ---------------------
735  QGridLayout* cLayout = new QGridLayout;
736  cLayout->setColumnMinimumWidth(0,14*ww);
737  _corrIntrComboBox->setMaximumWidth(9*ww);
738  _corrPortLineEdit->setMaximumWidth(9*ww);
739
740  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
741  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
742  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
743  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
744  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
745  cLayout->addWidget(new QLabel("Port"),                          3, 0);
746  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
747  cLayout->addWidget(new QLabel(""),                              4, 1);
748  cLayout->setRowStretch(7, 999);
749  cgroup->setLayout(cLayout);
750
751  // Feed Engine
752  // -----------
753  QGridLayout* sLayout = new QGridLayout;
754  sLayout->setColumnMinimumWidth(0,14*ww);
755  _outPortLineEdit->setMaximumWidth(9*ww);
756  _outWaitSpinBox->setMaximumWidth(9*ww);
757  _outSamplSpinBox->setMaximumWidth(9*ww);
758  _outUPortLineEdit->setMaximumWidth(9*ww);
759
760  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
761  sLayout->addWidget(new QLabel("Port"),                            1, 0);
762  sLayout->addWidget(_outPortLineEdit,                              1, 1);
763  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
764  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
765  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
766  sLayout->addWidget(_outSamplSpinBox,                              2, 1, Qt::AlignLeft);
767  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
768  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
769  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
770  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
771  sLayout->addWidget(new QLabel(""),                                5, 1);
772  sLayout->setRowStretch(6, 999);
773
774  sgroup->setLayout(sLayout);
775
776  // Serial Output
777  // -------------
778  QGridLayout* serLayout = new QGridLayout;
779  serLayout->setColumnMinimumWidth(0,12*ww);
780  _serialBaudRateComboBox->setMaximumWidth(9*ww);
781  _serialFlowControlComboBox->setMaximumWidth(11*ww);
782  _serialDataBitsComboBox->setMaximumWidth(5*ww);
783  _serialParityComboBox->setMaximumWidth(9*ww);
784  _serialStopBitsComboBox->setMaximumWidth(5*ww);
785  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
786  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
787  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
788
789  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
790  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
791  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
792  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
793  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
794  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
795  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
796  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
797  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
798  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
799  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
800  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
801  serLayout->addWidget(_serialParityComboBox,                     4, 3);
802  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
803  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
804  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
805  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
806  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
807  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
808  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
809  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
810  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
811  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
812  serLayout->addWidget(new QLabel(""),                            6, 1);
813  serLayout->setRowStretch(7, 999);
814
815  sergroup->setLayout(serLayout);
816
817  // Outages
818  // -------
819  QGridLayout* aLayout = new QGridLayout;
820  aLayout->setColumnMinimumWidth(0,14*ww);
821  _adviseObsRateComboBox->setMaximumWidth(9*ww);
822  _adviseFailSpinBox->setMaximumWidth(9*ww);
823  _adviseRecoSpinBox->setMaximumWidth(9*ww);
824
825  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
826  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
827  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
828  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
829  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
830  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
831  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
832  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
833  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
834  aLayout->addWidget(new QLabel(""),                              5, 1);
835  aLayout->setRowStretch(6, 999);
836
837  agroup->setLayout(aLayout);
838
839  // Miscellaneous
840  // -------------
841  QGridLayout* rLayout = new QGridLayout;
842  rLayout->setColumnMinimumWidth(0,14*ww);
843  _miscIntrComboBox->setMaximumWidth(9*ww);
844  _miscPortLineEdit->setMaximumWidth(9*ww);
845
846  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
847  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
848  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
849  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
850  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
851  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
852  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
853  rLayout->addWidget(new QLabel("Port"),                          4, 0);
854  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
855  rLayout->addWidget(new QLabel(""),                              5, 1);
856  rLayout->setRowStretch(6, 999);
857
858  rgroup->setLayout(rLayout);
859
860  // PPP
861  // ---
862  _pppWidgets._dataSource->setMaximumWidth(20*ww);
863  _pppWidgets._corrMount->setMaximumWidth(20*ww);
864
865  _pppWidgets._corrFile->setMaximumWidth(35*ww);
866  _pppWidgets._crdFile->setMaximumWidth(35*ww);
867  _pppWidgets._logPath->setMaximumWidth(35*ww);
868  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
869  _pppWidgets._snxtroIntr->setMaximumWidth(15*ww);
870
871  QGridLayout* pppLayout1 = new QGridLayout();
872  int ir = 0;
873  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
874  ++ir;
875  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
876  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
877  pppLayout1->addWidget(new QLabel("   RINEX Obs file"),     ir, 3);
878  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 4, 1, 3);
879  ++ir;
880  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
881  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
882  pppLayout1->addWidget(new QLabel("   RINEX Nav file"),     ir, 3);
883  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 4, 1, 3);
884  ++ir;
885  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 0);
886  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 1);
887  pppLayout1->addWidget(new QLabel("   ANTEX file"),         ir, 3);
888  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 4, 1, 3);
889  ++ir;
890  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
891  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
892  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 3);
893  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 4, 1, 3);
894  ++ir;
895  pppLayout1->addWidget(new QLabel("Logfile directory"),     ir, 0);
896  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 1);
897  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 3);
898  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 4, 1, 3);
899  ++ir;
900  pppLayout1->addWidget(new QLabel("SNX TRO directory"),     ir, 0);
901  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 1);
902  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 3);
903  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 4);
904  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 5, Qt::AlignRight);
905  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 6, Qt::AlignRight);
906  ++ir;
907  pppLayout1->setRowStretch(ir, 999);
908
909  pppGroup1->setLayout(pppLayout1);
910
911  QVBoxLayout* pppLayout2 = new QVBoxLayout();
912  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
913  pppLayout2->addWidget(_pppWidgets._staTable, 99);
914  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
915  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
916  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
917  pppLayout2sub->addStretch(99);
918
919  pppLayout2->addLayout(pppLayout2sub);
920
921  pppGroup2->setLayout(pppLayout2);
922
923  QGridLayout* pppLayout3 = new QGridLayout();
924  ir = 0;
925  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
926  ++ir;
927  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
928  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
929  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
930  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
931  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
932  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
933  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
934  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
935  ++ir;
936  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
937  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
938  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
939  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
940  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
941  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
942  ++ir;
943  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
944  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
945  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
946  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
947  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
948  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
949  ++ir;
950  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
951  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
952  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
953  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
954  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
955  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
956  ++ir;
957  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
958  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
959  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
960  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
961  ++ir;
962  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
963  pppLayout3->setColumnStretch(8, 999);
964  ++ir;
965  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
966  pppLayout3->setRowStretch(ir, 999);
967
968  pppGroup3->setLayout(pppLayout3);
969
970  // ------------------------
971  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
972  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
973  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
974
975  QGridLayout* pppLayout4 = new QGridLayout();
976  ir = 0;
977  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
978  ++ir;
979  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
980  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
981  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
982  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
983  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
984
985  ++ir;
986  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
987  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
988  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
989  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
990  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
991  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
992  ++ir;
993  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
994  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
995  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
996  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
997  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
998  ++ir;
999  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
1000  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
1001  ++ir;
1002  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
1003  pppLayout4->setRowStretch(ir, 999);
1004
1005  pppGroup4->setLayout(pppLayout4);
1006
1007  // Reqc Processing
1008  // ---------------
1009  _reqcActionComboBox = new QComboBox();
1010  _reqcActionComboBox->setEditable(false);
1011  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1012  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1013  if (ik != -1) {
1014    _reqcActionComboBox->setCurrentIndex(ik);
1015  }
1016  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1017          this, SLOT(slotBncTextChanged()));
1018
1019  QGridLayout* reqcLayout = new QGridLayout;
1020  _reqcActionComboBox->setMinimumWidth(15*ww);
1021  _reqcActionComboBox->setMaximumWidth(20*ww);
1022
1023  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1024  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1025
1026  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1027  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1028  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1029  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1030  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1031  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1032  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1033
1034  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1035          this, SLOT(slotBncTextChanged()));
1036
1037  _reqcLogSummaryOnly = new QCheckBox();
1038  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1039
1040  ir = 0;
1041  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1042  ++ir;
1043  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1044  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1045  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1046  _reqcEditOptionButton->setMinimumWidth(15*ww);
1047  _reqcEditOptionButton->setMaximumWidth(20*ww);
1048
1049  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1050  ++ir;
1051  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1052  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1053  _reqcObsFileChooser->setMaximumWidth(40*ww);
1054  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1055  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1056  _reqcNavFileChooser->setMaximumWidth(40*ww);
1057  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1058  ++ir;
1059  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1060  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1061  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1062  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1063  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1064  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1065  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1066  ++ir;
1067  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1068  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1069  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1070  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1071  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1072  ++ir;
1073  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1074  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1075  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1076  ++ir;
1077  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1078  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1079  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1080  ++ir;
1081  reqcLayout->setRowStretch(ir, 999);
1082
1083  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1084  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1085
1086  reqcgroup->setLayout(reqcLayout);
1087
1088  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1089          this, SLOT(slotReqcEditOption()));
1090
1091  QGridLayout* sp3CompLayout = new QGridLayout;
1092
1093  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1094  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1095  _sp3CompFileChooser->setMinimumWidth(15*ww);
1096  _sp3CompFileChooser->setMaximumWidth(40*ww);
1097
1098  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1099  _sp3CompExclude->setMinimumWidth(18*ww);
1100  _sp3CompExclude->setMaximumWidth(18*ww);
1101
1102  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1103  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1104  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1105
1106  ir = 0;
1107  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1108  ++ir;
1109  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1110  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1111  ++ir;
1112  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1113  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1114  ++ir;
1115  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1116  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1117  ++ir;
1118  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1119  ++ir;
1120  sp3CompLayout->setRowStretch(ir, 999);
1121
1122  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1123  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1124
1125  sp3CompGroup->setLayout(sp3CompLayout);
1126
1127  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1128          this, SLOT(slotBncTextChanged()));
1129
1130  // Combine Corrections
1131  // -------------------
1132  QGridLayout* cmbLayout = new QGridLayout;
1133
1134  populateCmbTable();
1135  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1136  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1137  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1138  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1139  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1140  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1141  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1142  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1143  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1144  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1145  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1146  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1147  cmbLayout->setRowStretch(7, 999);
1148
1149  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1150  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1151
1152  cmbgroup->setLayout(cmbLayout);
1153
1154  // Upload Layout (Clocks)
1155  // ----------------------
1156  QGridLayout* uploadHlpLayout = new QGridLayout();
1157
1158  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1159  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1160  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1161
1162  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1163  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1164  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1165  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1166  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1167  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1168  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1169  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1170  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1171  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1172  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1173  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1174  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1175
1176  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1177  populateUploadTable();
1178
1179  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1180  uploadLayout->addWidget(_uploadTable);
1181  uploadLayout->addLayout(uploadHlpLayout);
1182
1183  uploadgroup->setLayout(uploadLayout);
1184
1185  // Upload Layout (Ephemeris)
1186  // -------------------------
1187  QGridLayout* uploadLayoutEph = new QGridLayout;
1188
1189  uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1190  _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1191  _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1192  _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1193
1194  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1195  uploadLayoutEph->addWidget(new QLabel("Host"),                  1, 0);
1196  uploadLayoutEph->addWidget(_uploadEphHostLineEdit,              1, 1, 1, 3);
1197  uploadLayoutEph->addWidget(new QLabel("  Port"),                1, 4, Qt::AlignRight);
1198  uploadLayoutEph->addWidget(_uploadEphPortLineEdit,              1, 5, 1, 1);
1199  uploadLayoutEph->addWidget(new QLabel("Mountpoint           "), 2, 0);
1200  uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit,        2, 1);
1201  uploadLayoutEph->addWidget(new QLabel("          Password"),    2, 2, Qt::AlignRight);
1202  uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit,          2, 3);
1203  uploadLayoutEph->addWidget(new QLabel("Sampling"),              3, 0);
1204  uploadLayoutEph->addWidget(_uploadEphSampleSpinBox,             3, 1);
1205  uploadLayoutEph->addWidget(new QLabel("Uploaded"),              4, 0);
1206  uploadLayoutEph->addWidget(_uploadEphBytesCounter,              4, 1);
1207  uploadLayoutEph->setRowStretch(5, 999);
1208
1209  uploadEphgroup->setLayout(uploadLayoutEph);
1210
1211  connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1212          this, SLOT(slotBncTextChanged()));
1213
1214  // Main Layout
1215  // -----------
1216  QGridLayout* mLayout = new QGridLayout;
1217  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1218  mLayout->addWidget(_aogroup,            0,0);
1219  mLayout->addWidget(_mountPointsTable,   1,0);
1220  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1221  mLayout->addWidget(_loggroup,           2,0);
1222
1223  _canvas->setLayout(mLayout);
1224
1225  // WhatsThis, Network
1226  // ------------------
1227  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1228  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1229  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure wheter this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1230  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization erros' if you don't want to be bothered with this.</p>"));
1231
1232  // WhatsThis, General
1233  // ------------------
1234  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1235  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1236  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1237  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1238  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1239
1240  // WhatsThis, RINEX Observations
1241  // -----------------------------
1242  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1243  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1244  _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files.</p>"));
1245  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' suffix is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
1246  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1247  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1248  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified either as equal for all systems or as system specific. The following are example priority strings:</li><ul><li>'CWPX_?' (Same signal priorities valid for all systems)</li><li>'G:CWPX_? R:PCX_? E:CPX_?' (Specific signal priorities for GPS, GLONASS and Galileo system)</li></ul>Default is priority list 'CWPX_?'.</p>"));
1249  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1250  _rnxV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1251
1252  // WhatsThis, RINEX Ephemeris
1253  // --------------------------
1254  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1255  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1256  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1257  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1258  _ephV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1259
1260  // WhatsThis, RINEX Editing & QC
1261  // -----------------------------
1262  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1263  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1264  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1265  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1266  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1267  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1268  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1269  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1270  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1271  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for fequency and tracking mode or channel must be seperated by ampersand character '&'. Specifications for navigation systems must be seperated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5'. Specifying an empty option string would be overruled by this default.</p>"));
1272
1273  // WhatsThis, SP3 Comparison
1274  // -------------------------
1275  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1276  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparision. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparision.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1277  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1278
1279  // WhatsThis, Broadcast Corrections
1280  // --------------------------------
1281  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1282  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1283  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1284
1285  // WhatsThis, Feed Engine
1286  // ----------------------
1287  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1288  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1289  _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1290  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1291  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1292
1293  // WhatsThis, Serial Output
1294  // ------------------------
1295  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1296  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1297  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1298  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1299  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1300  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1301  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1302  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1303  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1304  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1305  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1306
1307  // WhatsThis, Outages
1308  // ------------------
1309  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1310  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1311  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1312  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1313
1314  // WhatsThis, Miscellaneous
1315  // ------------------------
1316  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1317  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1318  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1319  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1320
1321  // WhatsThis, PPP (1)
1322  // ------------------
1323  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull an RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1324  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1325  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1326  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1327  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1328  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1329  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either through<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>Nort, East and Up component of antenna excentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1330  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1331  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1332  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1333  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1334  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1335  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere paramers.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk.</p>"));
1336
1337  // WhatsThis, PPP (3)
1338  // ------------------
1339  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1340  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1341  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part ot the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1342  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part ot the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1343  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1344  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1345  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choise for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1346  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choise for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1347  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1348  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1349  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1350  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choise in order to avoid too noisy observations.</p>"));
1351
1352  // WhatsThis, Combine Corrections
1353  // ------------------------------
1354  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1355  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1356  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1357  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1358  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1359  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1360  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1361
1362  // WhatsThis, Upload Corrections
1363  // -----------------------------
1364  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1365  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1366  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the Upload Corrections' table.</p>"));
1367  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1368  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1369  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1370  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1371  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1372  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1373
1374  // WhatsThis, Upload Ephemeris
1375  // ---------------------------
1376  _uploadEphHostLineEdit->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the stream.</p><p>An empty option field means that you don't want to upload Broadcast Ephemeris.</p>"));
1377  _uploadEphPortLineEdit->setWhatsThis(tr("<p>Specify the IP port of the Ntrip Broadcaster to upload the Broadcast Ephemeris stream. Default is port 80.</p>"));
1378  _uploadEphMountpointLineEdit->setWhatsThis(tr("<p>Specify a mountpoint for uploading the Broadcast Ephemeris stream.</p>"));
1379  _uploadEphPasswordLineEdit->setWhatsThis(tr("<p>Specify the stream upload password protecting the mounpoint on the Ntrip Broadcaster.</p>"));
1380  _uploadEphSampleSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1381  _uploadEphBytesCounter->setWhatsThis(tr("<p>BNC shows the amount of data uploaded via this stream.</p>"));
1382// weber
1383
1384  // WhatsThis, Streams Canvas
1385  // -------------------------
1386  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1387  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1388  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1389  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1390  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1391  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1392
1393  // WhatsThis, Log Canvas
1394  // ---------------------
1395  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1396  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumtion per stream is shown in the 'Throughput' tab in bits per second (bps) or kilo bits per second (kbps).</p>"));
1397  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1398  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1399
1400
1401  // Enable/Disable all Widgets
1402  // --------------------------
1403  slotBncTextChanged();
1404  enableStartStop();
1405
1406  // Auto start
1407  // ----------
1408  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1409    slotStart();
1410  }
1411}
1412
1413// Destructor
1414////////////////////////////////////////////////////////////////////////////
1415bncWindow::~bncWindow() {
1416  delete _caster; BNC_CORE->setCaster(0);
1417  delete _casterEph;
1418  delete _bncFigureLate;
1419  delete _bncFigurePPP;
1420  delete _actHelp;
1421  delete _actAbout;
1422  delete _actFlowchart;
1423  delete _actFontSel;
1424  delete _actSaveOpt;
1425  delete _actQuit;
1426  delete _actAddMountPoints;
1427  delete _actDeleteMountPoints;
1428  delete _actMapMountPoints;
1429  delete _actStart;
1430  delete _actStop;
1431  delete _actwhatsthis;
1432  delete _proxyHostLineEdit;
1433  delete _proxyPortLineEdit;
1434  delete _sslCaCertPathLineEdit;
1435  delete _sslIgnoreErrorsCheckBox;
1436  delete _logFileLineEdit;
1437  delete _rawOutFileLineEdit;
1438  delete _rnxAppendCheckBox;
1439  delete _onTheFlyComboBox;
1440  delete _autoStartCheckBox;
1441  delete _rnxPathLineEdit;
1442  delete _rnxIntrComboBox;
1443  delete _rnxSamplSpinBox;
1444  delete _rnxFileCheckBox;
1445  delete _rnxSkelLineEdit;
1446  delete _rnxScrpLineEdit;
1447  delete _rnxV3CheckBox;
1448  delete _rnxV3filenameCheckBox;
1449  delete _rnxV2Priority;
1450  delete _ephPathLineEdit;
1451  delete _ephIntrComboBox;
1452  delete _ephOutPortLineEdit;
1453  delete _ephV3CheckBox;
1454  delete _ephV3filenameCheckBox;
1455  delete _corrPathLineEdit;
1456  delete _corrIntrComboBox;
1457  delete _corrPortLineEdit;
1458  delete _outPortLineEdit;
1459  delete _outWaitSpinBox;
1460  delete _outSamplSpinBox;
1461  delete _outFileLineEdit;
1462  delete _outUPortLineEdit;
1463  delete _serialMountPointLineEdit;
1464  delete _serialPortNameLineEdit;
1465  delete _serialBaudRateComboBox;
1466  delete _serialFlowControlComboBox;
1467  delete _serialDataBitsComboBox;
1468  delete _serialParityComboBox;
1469  delete _serialStopBitsComboBox;
1470  delete _serialAutoNMEAComboBox;
1471  delete _serialFileNMEALineEdit;
1472  delete _serialHeightNMEALineEdit;
1473  delete _serialManualNMEASamplingSpinBox;
1474  delete _adviseObsRateComboBox;
1475  delete _adviseFailSpinBox;
1476  delete _adviseRecoSpinBox;
1477  delete _adviseScriptLineEdit;
1478  delete _miscMountLineEdit;
1479  delete _miscPortLineEdit;
1480  delete _miscIntrComboBox;
1481  delete _miscScanRTCMCheckBox;
1482  _mountPointsTable->setRowCount(0);
1483  _mountPointsTable->deleteLater();
1484  delete _log;
1485  _cmbTable->setRowCount(0);
1486  _cmbTable->deleteLater();
1487  delete _cmbMaxresLineEdit;
1488  delete _cmbUseGlonass;
1489  delete _cmbSamplSpinBox;
1490  delete _cmbMethodComboBox;
1491  _uploadTable->setRowCount(0);
1492  _uploadTable->deleteLater();
1493  delete _uploadIntrComboBox;
1494  delete _uploadAntexFile;
1495  delete _uploadSamplRtcmEphCorrSpinBox;
1496  delete _uploadSamplSp3SpinBox;
1497  delete _uploadSamplClkRnxSpinBox;
1498  delete _uploadEphHostLineEdit;
1499  delete _uploadEphPortLineEdit;
1500  delete _uploadEphPasswordLineEdit;
1501  delete _uploadEphMountpointLineEdit;
1502  delete _uploadEphSampleSpinBox;
1503  delete _uploadEphBytesCounter;
1504  delete _loggroup;
1505  delete _reqcActionComboBox;
1506  delete _reqcObsFileChooser;
1507  delete _reqcNavFileChooser;
1508  delete _reqcOutObsLineEdit;
1509  delete _reqcOutNavLineEdit;
1510  delete _reqcOutLogLineEdit;
1511  delete _reqcPlotDirLineEdit;
1512  delete _reqcSkyPlotSignals;
1513  delete _reqcLogSummaryOnly;
1514  delete _reqcEditOptionButton;
1515  delete _sp3CompFileChooser;
1516  delete _sp3CompExclude;
1517  delete _sp3CompLogLineEdit;
1518  //delete _canvas;
1519}
1520
1521//
1522////////////////////////////////////////////////////////////////////////////
1523void bncWindow::populateMountPointsTable() {
1524
1525  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1526    _mountPointsTable->removeRow(iRow);
1527  }
1528
1529  bncSettings settings;
1530
1531  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1532  int iRow = 0;
1533  while (it.hasNext()) {
1534    QStringList hlp = it.next().split(" ");
1535    if (hlp.size() < 7) continue;
1536    _mountPointsTable->insertRow(iRow);
1537
1538    QUrl    url(hlp[0]);
1539
1540    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1541    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1542    QString nmea(hlp[5]);
1543    if (hlp[6] == "S") {
1544      fullPath = hlp[0].replace(0,2,"");
1545    }
1546    QString ntripVersion = "2";
1547    if (hlp.size() >= 7) {
1548      ntripVersion = (hlp[6]);
1549    }
1550
1551    QTableWidgetItem* it;
1552    it = new QTableWidgetItem(url.userInfo());
1553    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1554    _mountPointsTable->setItem(iRow, 0, it);
1555
1556    it = new QTableWidgetItem(fullPath);
1557    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1558    _mountPointsTable->setItem(iRow, 1, it);
1559
1560    it = new QTableWidgetItem(format);
1561    _mountPointsTable->setItem(iRow, 2, it);
1562
1563    it = new QTableWidgetItem(country);
1564    _mountPointsTable->setItem(iRow, 3, it);
1565
1566    if      (nmea == "yes") {
1567      it = new QTableWidgetItem(latitude);
1568      _mountPointsTable->setItem(iRow, 4, it);
1569      it = new QTableWidgetItem(longitude);
1570      _mountPointsTable->setItem(iRow, 5, it);
1571    } else {
1572      it = new QTableWidgetItem(latitude);
1573      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1574      _mountPointsTable->setItem(iRow, 4, it);
1575
1576      it = new QTableWidgetItem(longitude);
1577      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1578      _mountPointsTable->setItem(iRow, 5, it);
1579    }
1580
1581    it = new QTableWidgetItem(nmea);
1582    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1583    _mountPointsTable->setItem(iRow, 6, it);
1584
1585    it = new QTableWidgetItem(ntripVersion);
1586    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1587    _mountPointsTable->setItem(iRow, 7, it);
1588
1589    bncTableItem* bncIt = new bncTableItem();
1590    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1591    _mountPointsTable->setItem(iRow, 8, bncIt);
1592
1593    iRow++;
1594  }
1595
1596  _mountPointsTable->sortItems(1);
1597
1598  enableStartStop();
1599}
1600
1601// Retrieve Table
1602////////////////////////////////////////////////////////////////////////////
1603void bncWindow::slotAddMountPoints() {
1604
1605  bncSettings settings;
1606  QString proxyHost = settings.value("proxyHost").toString();
1607  int     proxyPort = settings.value("proxyPort").toInt();
1608  if (proxyHost != _proxyHostLineEdit->text()         ||
1609      proxyPort != _proxyPortLineEdit->text().toInt()) {
1610    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1611                                     "changed. Use the new ones?",
1612                                     QMessageBox::Yes, QMessageBox::No,
1613                                     QMessageBox::NoButton);
1614    if      (iRet == QMessageBox::Yes) {
1615      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1616      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1617    }
1618  }
1619
1620  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1621  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1622
1623  QMessageBox msgBox;
1624  msgBox.setIcon(QMessageBox::Question);
1625  msgBox.setWindowTitle("Add Stream");
1626  msgBox.setText("Add stream(s) coming from:");
1627
1628  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1629  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1630  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1631  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1632  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1633
1634  msgBox.exec();
1635
1636  if (msgBox.clickedButton() == buttonNtrip) {
1637    bncTableDlg* dlg = new bncTableDlg(this);
1638    dlg->move(this->pos().x()+50, this->pos().y()+50);
1639    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1640          this, SLOT(slotNewMountPoints(QStringList*)));
1641    dlg->exec();
1642    delete dlg;
1643  } else if (msgBox.clickedButton() == buttonIP) {
1644    bncIpPort* ipp = new bncIpPort(this);
1645    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1646          this, SLOT(slotNewMountPoints(QStringList*)));
1647    ipp->exec();
1648    delete ipp;
1649  } else if (msgBox.clickedButton() == buttonUDP) {
1650    bncUdpPort* udp = new bncUdpPort(this);
1651    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1652          this, SLOT(slotNewMountPoints(QStringList*)));
1653    udp->exec();
1654    delete udp;
1655  } else if (msgBox.clickedButton() == buttonSerial) {
1656    bncSerialPort* sep = new bncSerialPort(this);
1657    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1658          this, SLOT(slotNewMountPoints(QStringList*)));
1659    sep->exec();
1660    delete sep;
1661  } else if (msgBox.clickedButton() == buttonCancel) {
1662    // Cancel
1663  }
1664
1665  enableStartStop();
1666}
1667
1668// Delete Selected Mount Points
1669////////////////////////////////////////////////////////////////////////////
1670void bncWindow::slotDeleteMountPoints() {
1671
1672  int nRows = _mountPointsTable->rowCount();
1673  bool flg[nRows];
1674  for (int iRow = 0; iRow < nRows; iRow++) {
1675    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1676      flg[iRow] = true;
1677    }
1678    else {
1679      flg[iRow] = false;
1680    }
1681  }
1682  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1683    if (flg[iRow]) {
1684      _mountPointsTable->removeRow(iRow);
1685    }
1686  }
1687  _actDeleteMountPoints->setEnabled(false);
1688
1689  enableStartStop();
1690}
1691
1692// New Mount Points Selected
1693////////////////////////////////////////////////////////////////////////////
1694void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1695  int iRow = 0;
1696  QListIterator<QString> it(*mountPoints);
1697  while (it.hasNext()) {
1698    QStringList hlp = it.next().split(" ");
1699    QUrl    url(hlp[0]);
1700    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1701    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1702    QString nmea(hlp[5]);
1703    if (hlp[6] == "S") {
1704      fullPath = hlp[0].replace(0,2,"");
1705    }
1706    QString ntripVersion = "2";
1707    if (hlp.size() >= 7) {
1708      ntripVersion = (hlp[6]);
1709    }
1710
1711    _mountPointsTable->insertRow(iRow);
1712
1713    QTableWidgetItem* it;
1714    it = new QTableWidgetItem(url.userInfo());
1715    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1716    _mountPointsTable->setItem(iRow, 0, it);
1717
1718    it = new QTableWidgetItem(fullPath);
1719    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1720    _mountPointsTable->setItem(iRow, 1, it);
1721
1722    it = new QTableWidgetItem(format);
1723    _mountPointsTable->setItem(iRow, 2, it);
1724
1725    it = new QTableWidgetItem(country);
1726    _mountPointsTable->setItem(iRow, 3, it);
1727
1728    if      (nmea == "yes") {
1729    it = new QTableWidgetItem(latitude);
1730    _mountPointsTable->setItem(iRow, 4, it);
1731    it = new QTableWidgetItem(longitude);
1732    _mountPointsTable->setItem(iRow, 5, it);
1733    } else {
1734    it = new QTableWidgetItem(latitude);
1735    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1736    _mountPointsTable->setItem(iRow, 4, it);
1737    it = new QTableWidgetItem(longitude);
1738    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1739    _mountPointsTable->setItem(iRow, 5, it);
1740    }
1741
1742    it = new QTableWidgetItem(nmea);
1743    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1744    _mountPointsTable->setItem(iRow, 6, it);
1745
1746    it = new QTableWidgetItem(ntripVersion);
1747    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1748    _mountPointsTable->setItem(iRow, 7, it);
1749
1750    bncTableItem* bncIt = new bncTableItem();
1751    _mountPointsTable->setItem(iRow, 8, bncIt);
1752
1753    iRow++;
1754  }
1755  _mountPointsTable->hideColumn(0);
1756  _mountPointsTable->hideColumn(3);
1757  _mountPointsTable->sortItems(1);
1758  delete mountPoints;
1759
1760  enableStartStop();
1761}
1762
1763// Save Options (serialize)
1764////////////////////////////////////////////////////////////////////////////
1765void bncWindow::slotSaveOptions() {
1766  saveOptions();
1767  bncSettings settings;
1768  settings.sync();
1769}
1770
1771// Save Options (memory only)
1772////////////////////////////////////////////////////////////////////////////
1773void bncWindow::saveOptions() {
1774
1775  QStringList mountPoints;
1776  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1777
1778    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1779      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1780                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1781
1782      mountPoints.append(url.toString() + " " +
1783                         _mountPointsTable->item(iRow, 2)->text()
1784                 + " " + _mountPointsTable->item(iRow, 3)->text()
1785                 + " " + _mountPointsTable->item(iRow, 4)->text()
1786                 + " " + _mountPointsTable->item(iRow, 5)->text()
1787                 + " " + _mountPointsTable->item(iRow, 6)->text()
1788                 + " " + _mountPointsTable->item(iRow, 7)->text());
1789    } else {
1790      mountPoints.append(
1791                  "//" + _mountPointsTable->item(iRow, 1)->text()
1792                 + " " + _mountPointsTable->item(iRow, 2)->text()
1793                 + " " + _mountPointsTable->item(iRow, 3)->text()
1794                 + " " + _mountPointsTable->item(iRow, 4)->text()
1795                 + " " + _mountPointsTable->item(iRow, 5)->text()
1796                 + " " + _mountPointsTable->item(iRow, 6)->text()
1797                 + " " + _mountPointsTable->item(iRow, 7)->text());
1798    }
1799  }
1800
1801  QStringList cmbStreams;
1802  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1803    QString hlp;
1804    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1805      if (_cmbTable->item(iRow, iCol)) {
1806        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1807      }
1808    }
1809    if (!hlp.isEmpty()) {
1810      cmbStreams << hlp;
1811    }
1812  }
1813
1814  QStringList uploadMountpointsOut;
1815  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1816    QString hlp;
1817    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1818      if (_uploadTable->cellWidget(iRow, iCol) &&
1819          (iCol == 3 || iCol == 4 || iCol == 5)) {
1820        if      (iCol == 3) {
1821          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1822          hlp += passwd->text() + ",";
1823        }
1824        else if (iCol == 4) {
1825          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1826          hlp += system->currentText() + ",";
1827        }
1828        else if (iCol == 5) {
1829          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1830          QString state; state.setNum(com->checkState());
1831          hlp +=  state + ",";
1832        }
1833      }
1834      else if (_uploadTable->item(iRow, iCol)) {
1835        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1836      }
1837    }
1838    if (!hlp.isEmpty()) {
1839      uploadMountpointsOut << hlp;
1840    }
1841  }
1842
1843  bncSettings settings;
1844
1845  settings.setValue("startTab",    _aogroup->currentIndex());
1846  settings.setValue("statusTab",   _loggroup->currentIndex());
1847  settings.setValue("mountPoints", mountPoints);
1848// Network
1849  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1850  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1851  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1852  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1853// General
1854  settings.setValue("logFile",     _logFileLineEdit->text());
1855  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1856  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1857  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1858  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1859// RINEX Observations
1860  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1861  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1862  settings.setValue("rnxSampl",    _rnxSamplSpinBox->value());
1863  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1864  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1865  settings.setValue("rnxV3filenames",_rnxV3filenameCheckBox->checkState());
1866  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1867  (_rnxV3filenameCheckBox->checkState()) ?
1868    settings.setValue("rnxV3",       _rnxV3filenameCheckBox->checkState()) :
1869    settings.setValue("rnxV3",       _rnxV3CheckBox->checkState());
1870  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1871// RINEX Ephemeris
1872  settings.setValue("ephPath",       _ephPathLineEdit->text());
1873  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1874  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1875  settings.setValue("ephV3filenames", _ephV3filenameCheckBox->checkState());
1876  (_ephV3filenameCheckBox->checkState()) ?
1877    settings.setValue("ephV3",       _ephV3filenameCheckBox->checkState()) :
1878    settings.setValue("ephV3",       _ephV3CheckBox->checkState());
1879// Broadcast Corrections
1880  settings.setValue("corrPath",    _corrPathLineEdit->text());
1881  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1882  settings.setValue("corrPort",    _corrPortLineEdit->text());
1883// Feed Engine
1884  settings.setValue("outPort",     _outPortLineEdit->text());
1885  settings.setValue("outWait",     _outWaitSpinBox->value());
1886  settings.setValue("outSampl",    _outSamplSpinBox->value());
1887  settings.setValue("outFile",     _outFileLineEdit->text());
1888  settings.setValue("outUPort",    _outUPortLineEdit->text());
1889// Serial Output
1890  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1891  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1892  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1893  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1894  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1895  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1896  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1897  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1898  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1899  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1900  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1901// Outages
1902  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1903  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1904  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1905  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1906// Miscellaneous
1907  settings.setValue("miscMount",   _miscMountLineEdit->text());
1908  settings.setValue("miscPort",    _miscPortLineEdit->text());
1909  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1910  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1911// Reqc
1912  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1913  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1914  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1915  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1916  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1917  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1918  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1919  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1920  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1921// SP3 Comparison
1922  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
1923  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
1924  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1925// Combine Corrections
1926  if (!cmbStreams.isEmpty()) {
1927    settings.setValue("cmbStreams", cmbStreams);
1928  }
1929  else {
1930    settings.setValue("cmbStreams", "");
1931  }
1932  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
1933  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
1934  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
1935  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1936// Upload Corrections
1937  if (!uploadMountpointsOut.isEmpty()) {
1938    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1939  }
1940  else {
1941    settings.setValue("uploadMountpointsOut", "");
1942  }
1943  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
1944  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1945  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
1946  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
1947  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
1948// Upload Ephemeris
1949  settings.setValue("uploadEphHost",      _uploadEphHostLineEdit->text());
1950  settings.setValue("uploadEphPort",      _uploadEphPortLineEdit->text());
1951  settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1952  settings.setValue("uploadEphPassword",  _uploadEphPasswordLineEdit->text());
1953  settings.setValue("uploadEphSample",    _uploadEphSampleSpinBox->value());
1954
1955  if (_caster) {
1956    _caster->readMountPoints();
1957  }
1958
1959  _pppWidgets.saveOptions();
1960}
1961
1962// All get slots terminated
1963////////////////////////////////////////////////////////////////////////////
1964void bncWindow::slotGetThreadsFinished() {
1965  BNC_CORE->slotMessage("All Get Threads Terminated", true);
1966  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
1967  delete _casterEph; _casterEph = 0;
1968  _runningRealTime = false;
1969}
1970
1971// Start It!
1972////////////////////////////////////////////////////////////////////////////
1973void bncWindow::slotStart() {
1974  saveOptions();
1975  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1976    _runningPPP = true;
1977    enableStartStop();
1978    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1979    BNC_CORE->startPPP();
1980    _bncFigurePPP->reset();
1981  }
1982  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1983    if (_reqcActionComboBox->currentText() == "Analyze") {
1984      _runningQC = true;
1985      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1986      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1987      reqcAnalyze->start();
1988    }
1989    else {
1990      _runningEdit = true;
1991      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1992      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1993      reqcEdit->start();
1994    }
1995    enableStartStop();
1996  }
1997  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
1998    _runningSp3Comp = true;
1999    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2000    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2001    sp3Comp->start();
2002    enableStartStop();
2003  }
2004  else {
2005    startRealTime();
2006    BNC_CORE->startPPP();
2007  }
2008}
2009
2010// Start Real-Time (Retrieve Data etc.)
2011////////////////////////////////////////////////////////////////////////////
2012void bncWindow::startRealTime() {
2013
2014  _runningRealTime = true;
2015
2016  _bncFigurePPP->reset();
2017
2018  _actDeleteMountPoints->setEnabled(false);
2019
2020  enableStartStop();
2021
2022  _caster = new bncCaster();
2023
2024  BNC_CORE->setCaster(_caster);
2025  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2026  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2027  BNC_CORE->initCombination();
2028
2029  connect(_caster, SIGNAL(getThreadsFinished()),
2030          this, SLOT(slotGetThreadsFinished()));
2031
2032  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2033           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2034
2035  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION " ("BNC_OS") ==========", true);
2036
2037  bncSettings settings;
2038
2039  // Active panels
2040  // -------------
2041  if (!_rnxPathLineEdit->text().isEmpty())
2042      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2043  if (!_ephPathLineEdit->text().isEmpty())
2044      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2045  if (!_corrPathLineEdit->text().isEmpty())
2046      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2047  if (!_outPortLineEdit->text().isEmpty())
2048      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2049  if (!_serialMountPointLineEdit->text().isEmpty())
2050      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2051  if (!_adviseObsRateComboBox->currentText().isEmpty())
2052      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2053  if (!_miscMountLineEdit->text().isEmpty())
2054      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2055  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2056      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2057  if (_cmbTable->rowCount() > 0)
2058      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2059  if (_uploadTable->rowCount() > 0)
2060      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2061  if (!_uploadEphHostLineEdit->text().isEmpty())
2062      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2063
2064  QDir rnxdir(settings.value("rnxPath").toString());
2065  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2066
2067  QString rnx_file = settings.value("rnxScript").toString();
2068  if ( !rnx_file.isEmpty() ) {
2069    QFile rnxfile(settings.value("rnxScript").toString());
2070    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2071  }
2072
2073  QDir ephdir(settings.value("ephPath").toString());
2074  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2075
2076  QDir corrdir(settings.value("corrPath").toString());
2077  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2078
2079  QString advise_file = settings.value("adviseScript").toString();
2080  if ( !advise_file.isEmpty() ) {
2081    QFile advisefile(settings.value("adviseScript").toString());
2082    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2083  }
2084
2085  _caster->readMountPoints();
2086
2087  _casterEph = new bncEphUploadCaster();
2088  connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2089          _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2090}
2091
2092// Retrieve Data
2093////////////////////////////////////////////////////////////////////////////
2094void bncWindow::slotStop() {
2095  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2096                                   QMessageBox::Yes, QMessageBox::No,
2097                                   QMessageBox::NoButton);
2098  if (iRet == QMessageBox::Yes) {
2099    BNC_CORE->stopPPP();
2100    BNC_CORE->stopCombination();
2101    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2102    delete _casterEph; _casterEph = 0;
2103    _runningRealTime = false;
2104    _runningPPP      = false;
2105    enableStartStop();
2106  }
2107}
2108
2109// Close Application gracefully
2110////////////////////////////////////////////////////////////////////////////
2111void bncWindow::closeEvent(QCloseEvent* event) {
2112
2113  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2114                                   QMessageBox::Yes, QMessageBox::No,
2115                                   QMessageBox::Cancel);
2116
2117  if      (iRet == QMessageBox::Cancel) {
2118    event->ignore();
2119    return;
2120  }
2121  else if (iRet == QMessageBox::Yes) {
2122    slotSaveOptions();
2123  }
2124
2125  BNC_CORE->stopPPP();
2126
2127  QMainWindow::closeEvent(event);
2128}
2129
2130// User changed the selection of mountPoints
2131////////////////////////////////////////////////////////////////////////////
2132void bncWindow::slotSelectionChanged() {
2133  if (_mountPointsTable->selectedItems().isEmpty()) {
2134    _actDeleteMountPoints->setEnabled(false);
2135  }
2136  else {
2137    _actDeleteMountPoints->setEnabled(true);
2138  }
2139}
2140
2141// Display Program Messages
2142////////////////////////////////////////////////////////////////////////////
2143void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2144  if (showOnScreen ) {
2145    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2146  }
2147}
2148
2149// About Message
2150////////////////////////////////////////////////////////////////////////////
2151void bncWindow::slotAbout() {
2152 new bncAboutDlg(0);
2153}
2154
2155//Flowchart
2156////////////////////////////////////////////////////////////////////////////
2157void bncWindow::slotFlowchart() {
2158 new bncFlowchartDlg(0);
2159}
2160
2161// Help Window
2162////////////////////////////////////////////////////////////////////////////
2163void bncWindow::slotHelp() {
2164  QUrl url;
2165  url.setPath(":bnchelp.html");
2166  new bncHlpDlg(0, url);
2167}
2168
2169// Select Fonts
2170////////////////////////////////////////////////////////////////////////////
2171void bncWindow::slotFontSel() {
2172  bool ok;
2173  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2174  if (ok) {
2175    bncSettings settings;
2176    settings.setValue("font", newFont.toString());
2177    QApplication::setFont(newFont);
2178    int ww = QFontMetrics(newFont).width('w');
2179    setMinimumSize(60*ww, 80*ww);
2180    resize(60*ww, 80*ww);
2181  }
2182}
2183
2184// Whats This Help
2185void bncWindow::slotWhatsThis() {
2186  QWhatsThis::enterWhatsThisMode();
2187}
2188
2189//
2190////////////////////////////////////////////////////////////////////////////
2191void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2192  _threads = threads;
2193
2194  _bncFigure->updateMountPoints();
2195  _bncFigureLate->updateMountPoints();
2196
2197  populateMountPointsTable();
2198  bncSettings settings;
2199  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2200  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2201  QListIterator<bncGetThread*> iTh(threads);
2202  while (iTh.hasNext()) {
2203    bncGetThread* thread = iTh.next();
2204    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2205      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2206                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2207      if (url                                      == thread->mountPoint() &&
2208          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2209          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2210        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2211        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2212                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2213        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2214                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2215        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2216                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2217        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2218                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2219        break;
2220      }
2221    }
2222  }
2223}
2224
2225//
2226////////////////////////////////////////////////////////////////////////////
2227void bncWindow::CreateMenu() {
2228  // Create Menus
2229  // ------------
2230  _menuFile = menuBar()->addMenu(tr("&File"));
2231  _menuFile->addAction(_actFontSel);
2232  _menuFile->addSeparator();
2233  _menuFile->addAction(_actSaveOpt);
2234  _menuFile->addSeparator();
2235  _menuFile->addAction(_actQuit);
2236
2237  _menuHlp = menuBar()->addMenu(tr("&Help"));
2238  _menuHlp->addAction(_actHelp);
2239  _menuHlp->addAction(_actFlowchart);
2240  _menuHlp->addAction(_actAbout);
2241}
2242
2243// Toolbar
2244////////////////////////////////////////////////////////////////////////////
2245void bncWindow::AddToolbar() {
2246  QToolBar* toolBar = new QToolBar;
2247  addToolBar(Qt::BottomToolBarArea, toolBar);
2248  toolBar->setMovable(false);
2249  toolBar->addAction(_actAddMountPoints);
2250  toolBar->addAction(_actDeleteMountPoints);
2251  toolBar->addAction(_actMapMountPoints);
2252  toolBar->addAction(_actStart);
2253  toolBar->addAction(_actStop);
2254  toolBar->addWidget(new QLabel("                                           "));
2255  toolBar->addAction(_actwhatsthis);
2256}
2257
2258// About
2259////////////////////////////////////////////////////////////////////////////
2260bncAboutDlg::bncAboutDlg(QWidget* parent) :
2261   QDialog(parent) {
2262
2263  QTextBrowser* tb = new QTextBrowser;
2264  QUrl url; url.setPath(":bncabout.html");
2265  tb->setSource(url);
2266  tb->setReadOnly(true);
2267
2268  int ww = QFontMetrics(font()).width('w');
2269  QPushButton* _closeButton = new QPushButton("Close");
2270  _closeButton->setMaximumWidth(10*ww);
2271  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2272
2273  QGridLayout* dlgLayout = new QGridLayout();
2274  QLabel* img = new QLabel();
2275  img->setPixmap(QPixmap(":ntrip-logo.png"));
2276  dlgLayout->addWidget(img, 0,0);
2277  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2278  dlgLayout->addWidget(tb,1,0,1,2);
2279  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2280
2281  setLayout(dlgLayout);
2282  resize(60*ww, 60*ww);
2283  setWindowTitle("About BNC");
2284  show();
2285}
2286
2287//
2288////////////////////////////////////////////////////////////////////////////
2289bncAboutDlg::~bncAboutDlg() {
2290
2291};
2292
2293// Flowchart
2294////////////////////////////////////////////////////////////////////////////
2295bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2296   QDialog(parent) {
2297
2298  int ww = QFontMetrics(font()).width('w');
2299  QPushButton* _closeButton = new QPushButton("Close");
2300  _closeButton->setMaximumWidth(10*ww);
2301  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2302
2303  QGridLayout* dlgLayout = new QGridLayout();
2304  QLabel* img = new QLabel();
2305  img->setPixmap(QPixmap(":bncflowchart.png"));
2306  dlgLayout->addWidget(img, 0,0);
2307  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2308
2309  setLayout(dlgLayout);
2310  setWindowTitle("Flow Chart");
2311  show();
2312}
2313
2314//
2315////////////////////////////////////////////////////////////////////////////
2316bncFlowchartDlg::~bncFlowchartDlg() {
2317};
2318
2319// Enable/Disable Widget (and change its color)
2320////////////////////////////////////////////////////////////////////////////
2321void bncWindow::enableWidget(bool enable, QWidget* widget) {
2322
2323  const static QPalette paletteWhite(QColor(255, 255, 255));
2324  const static QPalette paletteGray(QColor(230, 230, 230));
2325
2326  widget->setEnabled(enable);
2327  if (enable) {
2328    widget->setPalette(paletteWhite);
2329  }
2330  else {
2331    widget->setPalette(paletteGray);
2332  }
2333}
2334
2335//  Bnc Text
2336////////////////////////////////////////////////////////////////////////////
2337void bncWindow::slotBncTextChanged(){
2338
2339  const static QPalette paletteWhite(QColor(255, 255, 255));
2340  const static QPalette paletteGray(QColor(230, 230, 230));
2341
2342  bool enable = true;
2343
2344  // Proxy
2345  //------
2346  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2347    enable = !_proxyHostLineEdit->text().isEmpty();
2348    enableWidget(enable, _proxyPortLineEdit);
2349  }
2350
2351  // RINEX Observations
2352  // ------------------
2353  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2354    enable = !_rnxPathLineEdit->text().isEmpty();
2355    enableWidget(enable, _rnxIntrComboBox);
2356    enableWidget(enable, _rnxSamplSpinBox);
2357    enableWidget(enable, _rnxSkelLineEdit);
2358    enableWidget(enable, _rnxFileCheckBox);
2359    enableWidget(enable, _rnxScrpLineEdit);
2360    enableWidget(enable, _rnxV2Priority);
2361    enableWidget(enable, _rnxV3CheckBox);
2362
2363    bool enable1 = true;
2364    enable1 = _rnxV3CheckBox->isChecked();
2365    if (enable && enable1) {
2366    enableWidget(false, _rnxV2Priority);
2367    }
2368    if (enable && !enable1) {
2369    enableWidget(true, _rnxV2Priority);
2370    }
2371  }
2372
2373  // RINEX Observations, Signal Priority
2374  // -----------------------------------
2375  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2376    if (!_rnxPathLineEdit->text().isEmpty()) {
2377      enableWidget(enable, _rnxIntrComboBox);
2378      enable = !_rnxV3CheckBox->isChecked();
2379      enableWidget(enable, _rnxV2Priority);
2380    }
2381  }
2382
2383  // RINEX Ephemeris
2384  // ---------------
2385  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2386    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2387    enableWidget(enable, _ephIntrComboBox);
2388    enableWidget(enable, _ephV3CheckBox);
2389    enableWidget(enable, _ephV3filenameCheckBox);
2390  }
2391
2392  // Broadcast Corrections
2393  // ---------------------
2394  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2395    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2396    enableWidget(enable, _corrIntrComboBox);
2397  }
2398
2399  // Feed Engine
2400  // -----------
2401  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2402    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2403    enableWidget(enable, _outWaitSpinBox);
2404    enableWidget(enable, _outSamplSpinBox);
2405  }
2406
2407  // Serial Output
2408  // -------------
2409  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2410      sender() == _serialAutoNMEAComboBox) {
2411    enable = !_serialMountPointLineEdit->text().isEmpty();
2412    enableWidget(enable, _serialPortNameLineEdit);
2413    enableWidget(enable, _serialBaudRateComboBox);
2414    enableWidget(enable, _serialParityComboBox);
2415    enableWidget(enable, _serialDataBitsComboBox);
2416    enableWidget(enable, _serialStopBitsComboBox);
2417    enableWidget(enable, _serialFlowControlComboBox);
2418    enableWidget(enable, _serialAutoNMEAComboBox);
2419    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2420    enableWidget(enable2, _serialFileNMEALineEdit);
2421    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2422    enableWidget(enable3, _serialHeightNMEALineEdit);
2423    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2424  }
2425
2426  // Outages
2427  // -------
2428  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2429    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2430    enableWidget(enable, _adviseFailSpinBox);
2431    enableWidget(enable, _adviseRecoSpinBox);
2432    enableWidget(enable, _adviseScriptLineEdit);
2433  }
2434
2435  // Miscellaneous
2436  // -------------
2437  if (sender() == 0 || sender() == _miscMountLineEdit) {
2438    enable = !_miscMountLineEdit->text().isEmpty();
2439    enableWidget(enable, _miscIntrComboBox);
2440    enableWidget(enable, _miscScanRTCMCheckBox);
2441    enableWidget(enable, _miscPortLineEdit);
2442  }
2443
2444  // Enable/disable Broadcast Ephemerides
2445  // ------------------------------------
2446  if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2447    enable = !_uploadEphHostLineEdit->text().isEmpty();
2448    enableWidget(enable, _uploadEphPortLineEdit);
2449    enableWidget(enable, _uploadEphMountpointLineEdit);
2450    enableWidget(enable, _uploadEphPasswordLineEdit);
2451    enableWidget(enable, _uploadEphSampleSpinBox);
2452  }
2453
2454  // Combine Corrections
2455  // -------------------
2456  if (sender() == 0 || sender() == _cmbTable) {
2457    int iRow = _cmbTable->rowCount();
2458    if (iRow > 0) {
2459      enableWidget(true, _cmbMethodComboBox);
2460      enableWidget(true, _cmbMaxresLineEdit);
2461      enableWidget(true, _cmbSamplSpinBox);
2462      enableWidget(true, _cmbUseGlonass);
2463    }
2464    else {
2465      enableWidget(false, _cmbMethodComboBox);
2466      enableWidget(false, _cmbMaxresLineEdit);
2467      enableWidget(false, _cmbSamplSpinBox);
2468      enableWidget(false, _cmbUseGlonass);
2469    }
2470  }
2471
2472  // Upload(clk)
2473  // -----------
2474  int iRow = _uploadTable->rowCount();
2475  if (iRow > 0) {
2476    enableWidget(true, _uploadIntrComboBox);
2477    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2478    enableWidget(true, _uploadSamplClkRnxSpinBox);
2479    enableWidget(true, _uploadSamplSp3SpinBox);
2480    enableWidget(true, _uploadAntexFile);
2481  }
2482  else {
2483    enableWidget(false, _uploadIntrComboBox);
2484    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2485    enableWidget(false, _uploadSamplClkRnxSpinBox);
2486    enableWidget(false, _uploadSamplSp3SpinBox);
2487    enableWidget(false, _uploadAntexFile);
2488  }
2489
2490  // QC
2491  // --
2492  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2493    enable = !_reqcActionComboBox->currentText().isEmpty();
2494    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2495//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2496    enableWidget(enable,                            _reqcObsFileChooser);
2497    enableWidget(enable,                            _reqcNavFileChooser);
2498    enableWidget(enable,                            _reqcOutLogLineEdit);
2499    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2500    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2501    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2502    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2503    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2504//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2505    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2506  }
2507
2508  // SP3 File Comparison
2509  // -------------------
2510  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2511    enable = !_sp3CompFileChooser->fileName().isEmpty();
2512    enableWidget(enable, _sp3CompLogLineEdit);
2513    enableWidget(enable, _sp3CompExclude);
2514  }
2515
2516  enableStartStop();
2517}
2518
2519//
2520////////////////////////////////////////////////////////////////////////////
2521void bncWindow::slotAddCmbRow() {
2522  int iRow = _cmbTable->rowCount();
2523  _cmbTable->insertRow(iRow);
2524  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2525    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2526  }
2527}
2528
2529//
2530////////////////////////////////////////////////////////////////////////////
2531void bncWindow::slotDelCmbRow() {
2532
2533  const static QPalette paletteWhite(QColor(255, 255, 255));
2534  const static QPalette paletteGray(QColor(230, 230, 230));
2535
2536  int nRows = _cmbTable->rowCount();
2537  bool flg[nRows];
2538  for (int iRow = 0; iRow < nRows; iRow++) {
2539    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2540      flg[iRow] = true;
2541    }
2542    else {
2543      flg[iRow] = false;
2544    }
2545  }
2546  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2547    if (flg[iRow]) {
2548      _cmbTable->removeRow(iRow);
2549    }
2550  }
2551  nRows = _cmbTable->rowCount();
2552  if (nRows < 1) {
2553    enableWidget(false, _cmbMethodComboBox);
2554    enableWidget(false, _cmbMaxresLineEdit);
2555    enableWidget(false, _cmbSamplSpinBox);
2556    enableWidget(false, _cmbUseGlonass);
2557  }
2558}
2559
2560//
2561////////////////////////////////////////////////////////////////////////////
2562void bncWindow::populateCmbTable() {
2563
2564  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2565    _cmbTable->removeRow(iRow);
2566  }
2567
2568  bncSettings settings;
2569
2570  int iRow = -1;
2571  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2572  while (it.hasNext()) {
2573    QStringList hlp = it.next().split(" ");
2574    if (hlp.size() > 2) {
2575      ++iRow;
2576      _cmbTable->insertRow(iRow);
2577    }
2578    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2579      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2580    }
2581  }
2582}
2583
2584//
2585////////////////////////////////////////////////////////////////////////////
2586void bncWindow::slotAddUploadRow() {
2587  int iRow = _uploadTable->rowCount();
2588  _uploadTable->insertRow(iRow);
2589  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2590    if      (iCol == 3) {
2591      QLineEdit* passwd = new QLineEdit();
2592      passwd->setFrame(false);
2593      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2594      _uploadTable->setCellWidget(iRow, iCol, passwd);
2595    }
2596    else if (iCol == 4) {
2597      QComboBox* system = new QComboBox();
2598      system->setEditable(false);
2599      system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2600      system->setFrame(false);
2601      _uploadTable->setCellWidget(iRow, iCol, system);
2602    }
2603    else if (iCol == 5) {
2604      QCheckBox* com = new QCheckBox();
2605      _uploadTable->setCellWidget(iRow, iCol, com);
2606    }
2607    else if (iCol == 11) {
2608      bncTableItem* bncIt = new bncTableItem();
2609      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2610      _uploadTable->setItem(iRow, iCol, bncIt);
2611      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2612    }
2613    else {
2614      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2615    }
2616  }
2617}
2618
2619//
2620////////////////////////////////////////////////////////////////////////////
2621void bncWindow::slotDelUploadRow() {
2622  BNC_CORE->_uploadTableItems.clear();
2623  int nRows = _uploadTable->rowCount();
2624  bool flg[nRows];
2625  for (int iRow = 0; iRow < nRows; iRow++) {
2626    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2627      flg[iRow] = true;
2628    }
2629    else {
2630      flg[iRow] = false;
2631    }
2632  }
2633  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2634    if (flg[iRow]) {
2635      _uploadTable->removeRow(iRow);
2636    }
2637  }
2638  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2639    BNC_CORE->_uploadTableItems[iRow] =
2640                                (bncTableItem*) _uploadTable->item(iRow, 11);
2641  }
2642  nRows = _uploadTable->rowCount();
2643  if (nRows < 1) {
2644    enableWidget(false, _uploadIntrComboBox);
2645    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2646    enableWidget(false, _uploadSamplSp3SpinBox);
2647    enableWidget(false, _uploadSamplClkRnxSpinBox);
2648    enableWidget(false, _uploadAntexFile);
2649  }
2650}
2651
2652//
2653////////////////////////////////////////////////////////////////////////////
2654void bncWindow::populateUploadTable() {
2655  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2656    _uploadTable->removeRow(iRow);
2657  }
2658
2659  bncSettings settings;
2660
2661  int iRow = -1;
2662  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2663  while (it.hasNext()) {
2664    QStringList hlp = it.next().split(",");
2665    if (hlp.size() > 6) {
2666      ++iRow;
2667      _uploadTable->insertRow(iRow);
2668    }
2669    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2670      if      (iCol == 3) {
2671        QLineEdit* passwd = new QLineEdit();
2672        passwd->setFrame(false);
2673        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2674        passwd->setText(hlp[iCol]);
2675        _uploadTable->setCellWidget(iRow, iCol, passwd);
2676      }
2677      else if (iCol == 4) {
2678        QComboBox* system = new QComboBox();
2679        system->setEditable(false);
2680        system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2681        system->setFrame(false);
2682        system->setCurrentIndex(system->findText(hlp[iCol]));
2683        _uploadTable->setCellWidget(iRow, iCol, system);
2684      }
2685      else if (iCol == 5) {
2686        QCheckBox* com = new QCheckBox();
2687        if (hlp[iCol].toInt() == Qt::Checked) {
2688          com->setCheckState(Qt::Checked);
2689        }
2690        _uploadTable->setCellWidget(iRow, iCol, com);
2691      }
2692      else if (iCol == 11) {
2693        bncTableItem* bncIt = new bncTableItem();
2694        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2695        _uploadTable->setItem(iRow, iCol, bncIt);
2696        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2697      }
2698      else {
2699        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2700      }
2701    }
2702  }
2703}
2704
2705//
2706////////////////////////////////////////////////////////////////////////////
2707void bncWindow::slotSetUploadTrafo() {
2708  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2709  dlg->exec();
2710  delete dlg;
2711}
2712
2713// Progress Bar Change
2714////////////////////////////////////////////////////////////////////////////
2715void bncWindow::slotPostProcessingProgress(int nEpo) {
2716  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2717}
2718
2719// Post-Processing Reqc Finished
2720////////////////////////////////////////////////////////////////////////////
2721void bncWindow::slotPostProcessingFinished() {
2722  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2723  _runningPPP     = false;
2724  _runningEdit    = false;
2725  _runningQC      = false;
2726  _runningSp3Comp = false;
2727  _actStart->setText(tr("Sta&rt"));
2728  enableStartStop();
2729}
2730
2731// Edit teqc-like editing options
2732////////////////////////////////////////////////////////////////////////////
2733void bncWindow::slotReqcEditOption() {
2734  saveOptions();
2735  reqcDlg* dlg = new reqcDlg(this);
2736  dlg->move(this->pos().x()+50, this->pos().y()+50);
2737  dlg->exec();
2738  delete dlg;
2739}
2740
2741// Enable/Disable Start and Stop Buttons
2742////////////////////////////////////////////////////////////////////////////
2743void bncWindow::enableStartStop() {
2744  if ( running() ) {
2745    _actStart->setEnabled(false);
2746    if (_runningRealTime || _runningPPP) {
2747      _actStop->setEnabled(true);
2748    }
2749  }
2750  else {
2751    _actStart->setEnabled(true);
2752    _actStop->setEnabled(false);
2753  }
2754}
2755
2756// Show Map
2757////////////////////////////////////////////////////////////////////////////
2758void bncWindow::slotMapMountPoints() {
2759  saveOptions();
2760  t_bncMap* bncMap = new t_bncMap(this);
2761  bncMap->setMinimumSize(800, 600);
2762  bncMap->setWindowTitle("Selected Mountpoints");
2763
2764  bncSettings settings;
2765  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2766  while (it.hasNext()) {
2767    QStringList hlp = it.next().split(" ");
2768    if (hlp.size() < 5) continue;
2769    QUrl   url(hlp[0]);
2770    double latDeg = hlp[2].toDouble();
2771    double lonDeg = hlp[3].toDouble();
2772    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2773  }
2774
2775  bncMap->show();
2776}
2777
2778// Show Map
2779////////////////////////////////////////////////////////////////////////////
2780void bncWindow::slotMapPPP() {
2781#ifdef QT_WEBKIT
2782  saveOptions();
2783  enableWidget(false, _pppWidgets._mapWinButton);
2784  enableWidget(false, _pppWidgets._useGoogleMap);
2785  enableWidget(false, _pppWidgets._useOpenStreetMap);
2786  enableWidget(false, _pppWidgets._mapWinDotSize);
2787  enableWidget(false, _pppWidgets._mapWinDotColor);
2788
2789  if (!_mapWin) {
2790    _mapWin = new bncMapWin(this);
2791    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2792    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2793            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2794  }
2795  _mapWin->show();
2796#else
2797  QMessageBox::information(this, "Information",
2798                           "Qt Library compiled without QtWebKit");
2799#endif
2800}
2801
2802// Show Map
2803////////////////////////////////////////////////////////////////////////////
2804void bncWindow::slotMapPPPClosed() {
2805#ifdef QT_WEBKIT
2806  enableWidget(true, _pppWidgets._mapWinButton);
2807  enableWidget(true, _pppWidgets._useGoogleMap);
2808  enableWidget(true, _pppWidgets._useOpenStreetMap);
2809  enableWidget(true, _pppWidgets._mapWinDotSize);
2810  enableWidget(true, _pppWidgets._mapWinDotColor);
2811  if (_mapWin) {
2812    QListIterator<bncGetThread*> it(_threads);
2813    while (it.hasNext()) {
2814      bncGetThread* thread = it.next();
2815      thread->disconnect(_mapWin);
2816    }
2817    _mapWin->deleteLater();
2818    _mapWin = 0;
2819  }
2820#endif
2821}
Note: See TracBrowser for help on using the repository browser.