source: ntrip/trunk/BNC/bncwindow.cpp@ 1347

Last change on this file since 1347 was 1347, checked in by weber, 15 years ago

* empty log message *
File size: 55.1 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class: bncWindow
30 *
31 * Purpose: This class implements the main application window.
32 *
33 * Author: L. Mervart
34 *
35 * Created: 24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bncapp.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bnchlpdlg.h"
49#include "bnchtml.h"
50#include "bnctableitem.h"
51
52using namespace std;
53
54// Constructor
55////////////////////////////////////////////////////////////////////////////
56bncWindow::bncWindow() {
57
58 _caster = 0;
59
60 int ww = QFontMetrics(this->font()).width('w');
61
62 static const QStringList labels = QString("account,broadcaster:port / mountpoint,decoder,lat,long,nmea,bytes").split(",");
63
64 setMinimumSize(80*ww, 65*ww);
65
66 setWindowTitle(tr("BKG Ntrip Client (BNC) Version 1.7"));
67
68 connect((bncApp*)qApp, SIGNAL(newMessage(QByteArray,bool)),
69 this, SLOT(slotWindowMessage(QByteArray,bool)));
70
71 // Create Actions
72 // --------------
73 _actHelp = new QAction(tr("&Help Contents"),this);
74 connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
75
76 _actAbout = new QAction(tr("&About BNC"),this);
77 connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
78
79 _actFlowchart = new QAction(tr("&Flow Chart"),this);
80 connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
81
82 _actFontSel = new QAction(tr("Select &Font"),this);
83 connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
84
85 _actSaveOpt = new QAction(tr("&Save && Activate Options"),this);
86 connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
87
88 _actQuit = new QAction(tr("&Quit"),this);
89 connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
90
91 _actAddMountPoints = new QAction(tr("Add &Mountpoints"),this);
92 connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
93
94 _actDeleteMountPoints = new QAction(tr("&Delete Mountpoints"),this);
95 connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
96 _actDeleteMountPoints->setEnabled(false);
97
98 _actGetData = new QAction(tr("Sta&rt"),this);
99 connect(_actGetData, SIGNAL(triggered()), SLOT(slotGetData()));
100
101 _actStop = new QAction(tr("Sto&p"),this);
102 connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
103 _actStop->setEnabled(false);
104
105 _actwhatsthis= new QAction(tr("Help=Shift+F1"),this);
106 connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
107
108 CreateMenu();
109 AddToolbar();
110
111 QSettings settings;
112 _proxyHostLineEdit = new QLineEdit(settings.value("proxyHost").toString());
113 _proxyPortLineEdit = new QLineEdit(settings.value("proxyPort").toString());
114 _proxyPortLineEdit->setMaximumWidth(9*ww);
115 _miscMountLineEdit = new QLineEdit(settings.value("miscMount").toString());
116 _miscMountLineEdit->setMaximumWidth(20*ww);
117 _scanRTCMCheckBox = new QCheckBox();
118 _scanRTCMCheckBox->setCheckState(Qt::CheckState(
119 settings.value("scanRTCM").toInt()));
120 _waitTimeSpinBox = new QSpinBox();
121 _waitTimeSpinBox->setMinimum(1);
122 _waitTimeSpinBox->setMaximum(30);
123 _waitTimeSpinBox->setSingleStep(1);
124 _waitTimeSpinBox->setSuffix(" sec");
125 _waitTimeSpinBox->setMaximumWidth(9*ww);
126 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
127 _outFileLineEdit = new QLineEdit(settings.value("outFile").toString());
128 _outPortLineEdit = new QLineEdit(settings.value("outPort").toString());
129 _outPortLineEdit->setMaximumWidth(9*ww);
130 _outUPortLineEdit = new QLineEdit(settings.value("outUPort").toString());
131 _outUPortLineEdit->setMaximumWidth(9*ww);
132 _outEphPortLineEdit = new QLineEdit(settings.value("outEphPort").toString());
133 _outEphPortLineEdit->setMaximumWidth(9*ww);
134 _corrPortLineEdit = new QLineEdit(settings.value("corrPort").toString());
135 _corrPortLineEdit->setMaximumWidth(9*ww);
136 _rnxPathLineEdit = new QLineEdit(settings.value("rnxPath").toString());
137 _ephPathLineEdit = new QLineEdit(settings.value("ephPath").toString());
138 _corrPathLineEdit = new QLineEdit(settings.value("corrPath").toString());
139
140 _rnxV3CheckBox = new QCheckBox();
141 _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
142 _ephV3CheckBox = new QCheckBox();
143 _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
144 _rnxScrpLineEdit = new QLineEdit(settings.value("rnxScript").toString());
145 _rnxSkelLineEdit = new QLineEdit(settings.value("rnxSkel").toString());
146 _rnxSkelLineEdit->setMaximumWidth(5*ww);
147 _rnxAppendCheckBox = new QCheckBox();
148 _rnxAppendCheckBox->setCheckState(Qt::CheckState(
149 settings.value("rnxAppend").toInt()));
150 _autoStartCheckBox = new QCheckBox();
151 _autoStartCheckBox->setCheckState(Qt::CheckState(
152 settings.value("autoStart").toInt()));
153 _rnxIntrComboBox = new QComboBox();
154 _rnxIntrComboBox->setMaximumWidth(9*ww);
155 _rnxIntrComboBox->setEditable(false);
156 _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
157 int ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
158 if (ii != -1) {
159 _rnxIntrComboBox->setCurrentIndex(ii);
160 }
161 _onTheFlyComboBox = new QComboBox();
162 _onTheFlyComboBox->setMaximumWidth(9*ww);
163 _onTheFlyComboBox->setEditable(false);
164 _onTheFlyComboBox->addItems(QString("1 day,1 hour,1 min").split(","));
165 ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
166 if (ii != -1) {
167 _onTheFlyComboBox->setCurrentIndex(ii);
168 }
169 _ephIntrComboBox = new QComboBox();
170 _ephIntrComboBox->setMaximumWidth(9*ww);
171 _ephIntrComboBox->setEditable(false);
172 _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
173 int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
174 if (jj != -1) {
175 _ephIntrComboBox->setCurrentIndex(jj);
176 }
177 _corrIntrComboBox = new QComboBox();
178 _corrIntrComboBox->setMaximumWidth(9*ww);
179 _corrIntrComboBox->setEditable(false);
180 _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
181 int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
182 if (mm != -1) {
183 _corrIntrComboBox->setCurrentIndex(mm);
184 }
185 _corrTimeSpinBox = new QSpinBox();
186 _corrTimeSpinBox->setMinimum(1);
187 _corrTimeSpinBox->setMaximum(30);
188 _corrTimeSpinBox->setSingleStep(1);
189 _corrTimeSpinBox->setSuffix(" sec");
190 _corrTimeSpinBox->setMaximumWidth(9*ww);
191 _corrTimeSpinBox->setValue(settings.value("corrTime").toInt());
192 _rnxSamplSpinBox = new QSpinBox();
193 _rnxSamplSpinBox->setMinimum(0);
194 _rnxSamplSpinBox->setMaximum(60);
195 _rnxSamplSpinBox->setSingleStep(5);
196 _rnxSamplSpinBox->setMaximumWidth(9*ww);
197 _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
198 _rnxSamplSpinBox->setSuffix(" sec");
199
200 _binSamplSpinBox = new QSpinBox();
201 _binSamplSpinBox->setMinimum(0);
202 _binSamplSpinBox->setMaximum(60);
203 _binSamplSpinBox->setSingleStep(5);
204 _binSamplSpinBox->setMaximumWidth(9*ww);
205 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
206 _binSamplSpinBox->setSuffix(" sec");
207
208 _obsRateComboBox = new QComboBox();
209 _obsRateComboBox->setMaximumWidth(9*ww);
210 _obsRateComboBox->setEditable(false);
211 _obsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
212 int kk = _obsRateComboBox->findText(settings.value("obsRate").toString());
213 if (kk != -1) {
214 _obsRateComboBox->setCurrentIndex(kk);
215 }
216 _makePauseCheckBox = new QCheckBox();
217 _makePauseCheckBox->setCheckState(Qt::CheckState(
218 settings.value("makePause").toInt()));
219 _adviseRecoSpinBox = new QSpinBox();
220 _adviseRecoSpinBox->setMinimum(0);
221 _adviseRecoSpinBox->setMaximum(60);
222 _adviseRecoSpinBox->setSingleStep(1);
223 _adviseRecoSpinBox->setSuffix(" min");
224 _adviseRecoSpinBox->setMaximumWidth(9*ww);
225 _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
226 _adviseFailSpinBox = new QSpinBox();
227 _adviseFailSpinBox->setMinimum(0);
228 _adviseFailSpinBox->setMaximum(60);
229 _adviseFailSpinBox->setSingleStep(1);
230 _adviseFailSpinBox->setSuffix(" min");
231 _adviseFailSpinBox->setMaximumWidth(9*ww);
232 _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
233 _logFileLineEdit = new QLineEdit(settings.value("logFile").toString());
234 _adviseScriptLineEdit = new QLineEdit(settings.value("adviseScript").toString());
235
236 _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
237 _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
238
239 _serialBaudRateComboBox = new QComboBox();
240 _serialBaudRateComboBox->setMaximumWidth(9*ww);
241 _serialBaudRateComboBox->addItems(QString("110,300,600,"
242 "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
243 kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
244 if (kk != -1) {
245 _serialBaudRateComboBox->setCurrentIndex(kk);
246 }
247 _serialParityComboBox = new QComboBox();
248 _serialParityComboBox->setMaximumWidth(9*ww);
249 _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
250 kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
251 if (kk != -1) {
252 _serialParityComboBox->setCurrentIndex(kk);
253 }
254 _serialDataBitsComboBox = new QComboBox();
255 _serialDataBitsComboBox->setMaximumWidth(5*ww);
256 _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
257 kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
258 if (kk != -1) {
259 _serialDataBitsComboBox->setCurrentIndex(kk);
260 }
261 _serialStopBitsComboBox = new QComboBox();
262 _serialStopBitsComboBox->setMaximumWidth(5*ww);
263 _serialStopBitsComboBox->addItems(QString("1,2").split(","));
264 kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
265 if (kk != -1) {
266 _serialStopBitsComboBox->setCurrentIndex(kk);
267 }
268 _serialAutoNMEACheckBox = new QCheckBox();
269 _serialAutoNMEACheckBox->setCheckState(Qt::CheckState(
270 settings.value("serialAutoNMEA").toInt()));
271
272 _perfIntrComboBox = new QComboBox();
273 _perfIntrComboBox->setMaximumWidth(9*ww);
274 _perfIntrComboBox->setEditable(false);
275 _perfIntrComboBox->addItems(QString(",1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
276 int ll = _perfIntrComboBox->findText(settings.value("perfIntr").toString());
277 if (ll != -1) {
278 _perfIntrComboBox->setCurrentIndex(ll);
279 }
280
281 _mountPointsTable = new QTableWidget(0,7);
282
283 _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
284 _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
285 _mountPointsTable->horizontalHeader()->resizeSection(3,7*ww);
286 _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
287 _mountPointsTable->horizontalHeader()->resizeSection(5,5*ww);
288 _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
289 _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
290 _mountPointsTable->setHorizontalHeaderLabels(labels);
291 _mountPointsTable->setGridStyle(Qt::NoPen);
292 _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
293 _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
294 _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
295 _mountPointsTable->hideColumn(0);
296 connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
297 SLOT(slotSelectionChanged()));
298 populateMountPointsTable();
299
300 _log = new QTextBrowser();
301 _log->setReadOnly(true);
302
303 // WhatsThis
304 // ---------
305 _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
306 _proxyPortLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you might need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the NTRIP broadcasters. If these are not possible, you might need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
307 _waitTimeSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full epoch' seconds. A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS engine or products.</p><p>Note that 'Wait for full epoch' does not effect the RINEX Observation file content. Observations received later than 'Wait for full epoch' seconds will still be included in the RINEX Observation files.</p>"));
308 _outFileLineEdit->setWhatsThis(tr("Specify the full path to a file where synchronized observations are saved in plain ASCII format. Beware that the size of this file can rapidly increase depending on the number of incoming streams."));
309 _outPortLineEdit->setWhatsThis(tr("BNC can produce synchronized observations in binary format on your local host through an IP port. Specify a port number here to activate this function."));
310 _outUPortLineEdit->setWhatsThis(tr("BNC can produce unsynchronized observations in binary format on your local host through an IP port. Specify a port number here to activate this function."));
311 _outEphPortLineEdit->setWhatsThis(tr("BNC can produce ephemeris data in RINEX ASCII format on your local host through an IP port. Specify a port number here to activate this function."));
312 _corrPortLineEdit->setWhatsThis(tr("BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port. Specify a port number here to activate this function."));
313 _corrTimeSpinBox->setWhatsThis(tr("Concerning output through IP port, BNC drops Broadcast Ephemeris Corrections received later than 'Wait for full epoch' seconds. A value of 2 to 5 seconds is recommended, depending on the latency of the incoming correction stream(s) and the delay acceptable to your real-time application."));
314 _rnxPathLineEdit->setWhatsThis(tr("Here you specify the path to where the RINEX Observation files will be stored. If the specified directory does not exist, BNC will not create RINEX Observation files."));
315 _ephPathLineEdit->setWhatsThis(tr("Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files. If the specified directory does not exist, BNC will not create RINEX Navigation files."));
316 _corrPathLineEdit->setWhatsThis(tr("Specify a directory for saving Broadcast Ephemeris Correction files. If the specified directory does not exist, BNC will not create the files."));
317 _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is saved, you might want to compress, copy or upload it immediately via FTP. BNC allows you to execute a script/batch file to carry out these operations. To do that specify the full path of the script/batch file here. BNC will pass the full RINEX Observation file path to the script as a command line parameter (%1 on Windows systems, $1 onUnix/Linux systems).</p><p>The triggering event for calling the script or batch file is the end of a RINEX Observation file 'Interval'. If that is overridden by a stream outage, the triggering event is the stream reconnection.</p>"));
318 _rnxSkelLineEdit->setWhatsThis(tr("<p>Whenever BNC starts generating RINEX Observation files (and then once every day at midnight), it first tries to retrieve information needed for RINEX headers from so-called public RINEX header skeleton files which are derived from sitelogs. However, sometimes public RINEX header skeleton files are not available, its contents is not up to date, or you need to put additional/optional records in the RINEX header.</p><p>For that BNC allows using personal skeleton files that contain the header records you would like to include. You can derive a personal RINEX header skeleton file from the information given in an up to date sitelog. A file in the RINEX 'Directory' with the RINEX 'Skeleton extension' is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream.</p>"));
319 _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and any existing files with the same name will be overwritten. However, users might want to append already existing files following a restart of BNC, a system crash or when BNC crashed. Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
320 _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
321 _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately through 'Save & Activate Options'.</p>"));
322 _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
323 _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
324 _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of the Broadcast Ephemeris Correction files.</p>"));
325 _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. A value of zero '0' tells BNC to store all received epochs into RINEX.</p>"));
326 _binSamplSpinBox->setWhatsThis(tr("<p>Select the Observation sampling interval in seconds. A value of zero '0' tells BNC to send/store all received epochs.</p>"));
327 _obsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>An empty option field (default) means that you don't want an explicit information from BNC about stream outages and incoming streams that can not be decoded and that the special procedure for handling of corrupted streams is bypassed.</p>"));
328 _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p><p>Note that for using this function you need to specify the 'Observation rate'.</p>"));
329 _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p><p>Note that for using this function you need to specify the 'Observation rate'.</p>"));
330 _makePauseCheckBox->setWhatsThis(tr("<p>In case of a continuously corrupted stream, the decoding process can be paused and decodings are then attempted again at decreasing rate till the stream hopefully recovers. Tick 'Pause' to activate this function.</p><p>Do not tick 'Pause' (default) in order to prevent BNC from making any decoding pause. Be aware that this may incur an unnecessary workload.</p><p>Note that this function is only effective if an 'Observation rate' is specified.</p>"));
331 _logFileLineEdit->setWhatsThis(tr("Records of BNC's activities are shown in the Log section on the bottom of this window. They can be saved into a file when a valid path is specified in the 'Logfile (full path)' field."));
332 _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and one of the comments 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script can be configured to send an email to BNC's operator and/or to the affected stream provider. An empty option field (default) or invalid path means that you don't want to use this option.</p><p> Note that for using this function you need to specify the 'Observation rate'.</p>"));
333 _perfIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the Log file/section at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
334 _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Mountpoints' section. Clicking on 'Add Mountpoints' button will open a window that allows the user to select data streams from an NTRIP broadcaster according to their mountpoints. To remove a stream from the 'Mountpoints' list, highlight it by clicking on it and hit the 'Delete Mountpoints' button. You can also remove multiple mountpoints by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' and 'format-details' as given in the sourcetable. However, there might be cases where you need to override the automatic selection due to incorrect sourcetable for example. BNC allows users to manually select the required decoder by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. The accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x', and 'RTIGS'.</p><p>In case you need to log the raw data as is, BNC allows users to by-pass its decoders and and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). To initiate these streams, an approximate rover position needs to be sent in NMEA GGA message to the NTRIP broadcaster. In return, a user-specific data stream is generated, typically by a Network-RTK software. This stream is customized to the exact latitude and longitude as shown in the 'lat' and 'long' columns under 'Mountpoints'. These VRS streams are indicated by a 'yes' in the 'nmea' column under 'Mountpoints' as well as in the sourcetable. The default 'lat' and 'long' values are taken from the sourcetable. However, in most cases you would probably want to change this according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter. The format is in positive north latitude degrees (e.g. for northern hemisphere: 52.436, for southern hemisphere: -24.567) and eastern longitude degrees (e.g.: 358.872 or -1.128). Only mountpoints with a 'yes' in its 'nmea' column can be edited. The position should preferably be a point within the coverage of the network.</p>"));
335 _log->setWhatsThis(tr("Records of BNC's activities are shown in the Log section. The message log covers the communication status between BNC and the NTRIP broadcaster as well as any problems that occur in the communication link, stream availability, stream delay, stream conversion etc."));
336 _ephV3CheckBox->setWhatsThis(tr("The default format for RINEX Navigation files containing Broadcast Ephemeris is RINEX Version 2.11. Select 'Version 3' if you want to save the ephemeris in RINEX Version 3 format."));
337 _rnxV3CheckBox->setWhatsThis(tr("The default format for RINEX Observation files is RINEX Version 2.11. Select 'Version 3' if you want to save the observations in RINEX Version 3 format."));
338 _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
339 _scanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incomming message types as well as contained antenna coordinates, antenna heigt, and antenna descriptor.</p><p>An empty option field (default) means that you don't want BNC to log such information.</p>"));
340 _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected device.</p>"));
341 _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected device. Valid port names are</p><pre>Windows: COM1, COM2<br>Linux: /dev/ttyS0, /dev/ttyS1<br>FreeBSD: /dev/ttyd0, /dev/ttyd1<br>Digital Unix: /dev/tty01, /dev/tty02<br>HP-UX: /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX: /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre>"));
342 _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial link.</p><p>Note that your selection must equal the baud rate configured to the serial connected device. Note further that using a high baud rate is recommended.</p>"));
343 _serialParityComboBox->setWhatsThis(tr("<p>Select the 'Parity' for the serial link.</p><p>Note that your selection must equal the parity selection configured to the serial connected device. Note further that parity is often set to 'NONE'.</p>"));
344 _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected device. Note further that often 8 data bits are used.</p>"));
345 _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected device. Note further that often 1 stop bit is used.</p>"));
346 _serialAutoNMEACheckBox->setWhatsThis(tr("<p>Tick 'Auto NMEA' to forward NMEA GGA messages coming from your serial connected device to the NTRIP brodacaster.</p><p>Note that this replaces the simulation of an initial NMEA GGA message based on latitude/longitude from the broadcaster's sourcetable.</p>"));
347
348 // Canvas with Editable Fields
349 // ---------------------------
350 _canvas = new QWidget;
351 setCentralWidget(_canvas);
352
353 QTabWidget* aogroup = new QTabWidget();
354 QWidget* pgroup = new QWidget();
355 QWidget* ggroup = new QWidget();
356 QWidget* sgroup = new QWidget();
357 QWidget* egroup = new QWidget();
358 QWidget* agroup = new QWidget();
359 QWidget* cgroup = new QWidget();
360 QWidget* ogroup = new QWidget();
361 QWidget* rgroup = new QWidget();
362 QWidget* sergroup = new QWidget();
363 aogroup->addTab(pgroup,tr("Proxy"));
364 aogroup->addTab(ggroup,tr("General"));
365 aogroup->addTab(ogroup,tr("RINEX Observations"));
366 aogroup->addTab(egroup,tr("RINEX Ephemeris"));
367 aogroup->addTab(cgroup,tr("Ephemeris Corrections"));
368 aogroup->addTab(sgroup,tr("Feed Engine"));
369 aogroup->addTab(sergroup,tr("Serial Link"));
370 aogroup->addTab(agroup,tr("Outages"));
371 aogroup->addTab(rgroup,tr("Miscellaneous"));
372
373 QGridLayout* pLayout = new QGridLayout;
374 pLayout->setColumnMinimumWidth(0,14*ww);
375 pLayout->addWidget(new QLabel("Proxy host"),0,0, Qt::AlignLeft);
376 pLayout->addWidget(_proxyHostLineEdit,0, 1);
377 pLayout->addWidget(new QLabel("Proxy port"),1,0, Qt::AlignLeft);
378 pLayout->addWidget(_proxyPortLineEdit,1,1);
379 pLayout->addWidget(new QLabel("Settings for the proxy in protected networks, leave the boxes blank if none."),2, 0, 1, 2, Qt::AlignLeft);
380 pLayout->addWidget(new QLabel(" "),3,0);
381 pLayout->addWidget(new QLabel(" "),4,0);
382 pLayout->addWidget(new QLabel(" "),5,0);
383 pgroup->setLayout(pLayout);
384
385 QGridLayout* gLayout = new QGridLayout;
386 gLayout->setColumnMinimumWidth(0,14*ww);
387 gLayout->addWidget(new QLabel("Logfile (full path)"), 0, 0);
388 gLayout->addWidget(_logFileLineEdit, 0, 1);
389 gLayout->addWidget(new QLabel("Append files"), 1, 0);
390 gLayout->addWidget(_rnxAppendCheckBox, 1, 1);
391 gLayout->addWidget(new QLabel("Reread configuration"), 2, 0);
392 gLayout->addWidget(_onTheFlyComboBox, 2, 1);
393 gLayout->addWidget(new QLabel("Auto start"), 3, 0);
394 gLayout->addWidget(_autoStartCheckBox, 3, 1);
395 gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, and auto-start."),4, 0, 1, 2, Qt::AlignLeft);
396 gLayout->addWidget(new QLabel(" "),5,0);
397 ggroup->setLayout(gLayout);
398
399 QGridLayout* sLayout = new QGridLayout;
400 sLayout->setColumnMinimumWidth(0,14*ww);
401 sLayout->addWidget(new QLabel("Port (synchronized)"), 0, 0);
402 sLayout->addWidget(_outPortLineEdit, 0, 1);
403 sLayout->addWidget(new QLabel("Wait for full epoch"), 0, 2, Qt::AlignRight);
404 sLayout->addWidget(_waitTimeSpinBox, 0, 3, Qt::AlignLeft);
405 sLayout->addWidget(new QLabel("Port (unsynchronized)"), 1, 0);
406 sLayout->addWidget(_outUPortLineEdit, 1, 1);
407 sLayout->addWidget(new QLabel("File (full path)"), 2, 0);
408 sLayout->addWidget(_outFileLineEdit, 2, 1, 1, 30);
409 sLayout->addWidget(new QLabel("Sampling"), 3, 0);
410 sLayout->addWidget(_binSamplSpinBox, 3, 1, Qt::AlignLeft);
411 sLayout->addWidget(new QLabel("Output decoded observations in a binary format to feed a real-time GNSS engine."),4,0,1,30);
412 sLayout->addWidget(new QLabel(" "),5,0);
413 sgroup->setLayout(sLayout);
414
415 QGridLayout* eLayout = new QGridLayout;
416 eLayout->setColumnMinimumWidth(0,14*ww);
417 eLayout->addWidget(new QLabel("Directory"), 0, 0);
418 eLayout->addWidget(_ephPathLineEdit, 0, 1);
419 eLayout->addWidget(new QLabel("Interval"), 1, 0);
420 eLayout->addWidget(_ephIntrComboBox, 1, 1);
421 eLayout->addWidget(new QLabel("Port"), 2, 0);
422 eLayout->addWidget(_outEphPortLineEdit, 2, 1);
423 eLayout->addWidget(new QLabel("Version 3"), 3, 0);
424 eLayout->addWidget(_ephV3CheckBox, 3, 1);
425 eLayout->addWidget(new QLabel("Saving RINEX ephemeris files and ephemeris output through IP port."),4,0,1,2,Qt::AlignLeft);
426 eLayout->addWidget(new QLabel(" "),5,0);
427 egroup->setLayout(eLayout);
428
429 QGridLayout* aLayout = new QGridLayout;
430 aLayout->setColumnMinimumWidth(0,14*ww);
431 aLayout->addWidget(new QLabel("Observation rate"), 0, 0);
432 aLayout->addWidget(_obsRateComboBox, 0, 1);
433 aLayout->addWidget(new QLabel("Failure threshold"), 1, 0);
434 aLayout->addWidget(_adviseFailSpinBox, 1, 1);
435 aLayout->addWidget(new QLabel("Recovery threshold"), 2, 0);
436 aLayout->addWidget(_adviseRecoSpinBox, 2, 1);
437 aLayout->addWidget(new QLabel("Pause"), 2, 2, Qt::AlignRight);
438 aLayout->addWidget(_makePauseCheckBox, 2, 3, Qt::AlignLeft);
439 aLayout->addWidget(new QLabel("Script (full path)"), 3, 0);
440 aLayout->addWidget(_adviseScriptLineEdit, 3, 1,1,10);
441 aLayout->addWidget(new QLabel("Outage report, handling of corrupted streams."),5,0,1,10,Qt::AlignLeft);
442 agroup->setLayout(aLayout);
443
444 QGridLayout* rLayout = new QGridLayout;
445 rLayout->setColumnMinimumWidth(0,14*ww);
446 rLayout->addWidget(new QLabel("Mountpoint"), 0, 0, Qt::AlignLeft);
447 rLayout->addWidget(_miscMountLineEdit, 0, 1,1,15,Qt::AlignLeft);
448 rLayout->addWidget(new QLabel("Log latency"), 1, 0);
449 rLayout->addWidget(_perfIntrComboBox, 1, 1);
450 rLayout->addWidget(new QLabel("Scan RTCM"), 2, 0);
451 rLayout->addWidget(_scanRTCMCheckBox, 2, 1);
452 rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for numbers of message types and antenna information."),3, 0, 1, 4, Qt::AlignLeft);
453 rLayout->addWidget(new QLabel(" "), 4, 0);
454 rLayout->addWidget(new QLabel(" "), 5, 0);
455 rgroup->setLayout(rLayout);
456
457 QGridLayout* oLayout = new QGridLayout;
458 oLayout->setColumnMinimumWidth(0,14*ww);
459 oLayout->addWidget(new QLabel("Directory"), 0, 0);
460 oLayout->addWidget(_rnxPathLineEdit, 0, 1,1,12);
461 oLayout->addWidget(new QLabel("Interval"), 1, 0);
462 oLayout->addWidget(_rnxIntrComboBox, 1, 1);
463 oLayout->addWidget(new QLabel("Sampling"), 1, 2, Qt::AlignRight);
464 oLayout->addWidget(_rnxSamplSpinBox, 1, 3, Qt::AlignLeft);
465 oLayout->addWidget(new QLabel("Skeleton extension"), 2, 0);
466 oLayout->addWidget(_rnxSkelLineEdit, 2, 1,1,1, Qt::AlignLeft);
467 oLayout->addWidget(new QLabel("Script (full path)"), 3, 0);
468 oLayout->addWidget(_rnxScrpLineEdit, 3, 1,1,12);
469 oLayout->addWidget(new QLabel("Version 3"), 4, 0);
470 oLayout->addWidget(_rnxV3CheckBox, 4, 1);
471 oLayout->addWidget(new QLabel("Saving RINEX observation files."),5,0,1,12, Qt::AlignLeft);
472 ogroup->setLayout(oLayout);
473
474 QGridLayout* cLayout = new QGridLayout;
475 cLayout->setColumnMinimumWidth(0,14*ww);
476 cLayout->addWidget(new QLabel("Directory"), 0, 0);
477 cLayout->addWidget(_corrPathLineEdit, 0, 1,1,30);
478 cLayout->addWidget(new QLabel("Interval"), 1, 0);
479 cLayout->addWidget(_corrIntrComboBox, 1, 1);
480 cLayout->addWidget(new QLabel("Port"), 2, 0);
481 cLayout->addWidget(_corrPortLineEdit, 2, 1);
482 cLayout->addWidget(new QLabel("Wait for full epoch"), 2, 2, Qt::AlignRight);
483 cLayout->addWidget(_corrTimeSpinBox, 2, 3, Qt::AlignLeft);
484 cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port."),3,0,1,30);
485 cLayout->addWidget(new QLabel(" "),4,0);
486 cLayout->addWidget(new QLabel(" "),5,0);
487 cgroup->setLayout(cLayout);
488
489 QGridLayout* serLayout = new QGridLayout;
490 serLayout->setColumnMinimumWidth(0,14*ww);
491 serLayout->addWidget(new QLabel("Mountpoint"), 0,0, Qt::AlignLeft);
492 serLayout->addWidget(_serialMountPointLineEdit, 0,1,1,2);
493 serLayout->addWidget(new QLabel("Port name"), 1,0, Qt::AlignLeft);
494 serLayout->addWidget(_serialPortNameLineEdit, 1,1,1,2);
495 serLayout->addWidget(new QLabel("Baud rate"), 2,0, Qt::AlignLeft);
496 serLayout->addWidget(_serialBaudRateComboBox, 2,1);
497 serLayout->addWidget(new QLabel(" Parity "), 2,2, Qt::AlignRight);
498 serLayout->addWidget(_serialParityComboBox, 2,3);
499 serLayout->addWidget(new QLabel("Data bits"), 3,0, Qt::AlignLeft);
500 serLayout->addWidget(_serialDataBitsComboBox, 3,1);
501 serLayout->addWidget(new QLabel(" Stop bits "), 3,2, Qt::AlignRight);
502 serLayout->addWidget(_serialStopBitsComboBox, 3,3);
503 serLayout->addWidget(new QLabel("Auto NMEA"), 4, 0);
504 serLayout->addWidget(_serialAutoNMEACheckBox, 4, 1);
505 serLayout->addWidget(new QLabel("Serial port settings to feed a serial connected device."),5,0,1,30);
506
507 sergroup->setLayout(serLayout);
508
509 QVBoxLayout* mLayout = new QVBoxLayout;
510 mLayout->addWidget(aogroup);
511 mLayout->addWidget(_mountPointsTable);
512 mLayout->addWidget(_log);
513
514 _canvas->setLayout(mLayout);
515
516 // Auto start
517 // ----------
518 if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
519 slotGetData();
520 }
521}
522
523// Destructor
524////////////////////////////////////////////////////////////////////////////
525bncWindow::~bncWindow() {
526 delete _caster;
527}
528
529//
530////////////////////////////////////////////////////////////////////////////
531void bncWindow::populateMountPointsTable() {
532
533 for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
534 _mountPointsTable->removeRow(iRow);
535 }
536
537 QSettings settings;
538
539 QListIterator<QString> it(settings.value("mountPoints").toStringList());
540 if (!it.hasNext()) {
541 _actGetData->setEnabled(false);
542 }
543 int iRow = 0;
544 while (it.hasNext()) {
545 QStringList hlp = it.next().split(" ");
546 if (hlp.size() < 5) continue;
547 _mountPointsTable->insertRow(iRow);
548
549 QUrl url(hlp[0]);
550
551 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
552 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
553 QString nmea(hlp[4]);
554
555 QTableWidgetItem* it;
556 it = new QTableWidgetItem(url.userInfo());
557 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
558 _mountPointsTable->setItem(iRow, 0, it);
559
560 it = new QTableWidgetItem(fullPath);
561 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
562 _mountPointsTable->setItem(iRow, 1, it);
563
564 it = new QTableWidgetItem(format);
565 _mountPointsTable->setItem(iRow, 2, it);
566
567 if (nmea == "yes") {
568 it = new QTableWidgetItem(latitude);
569 _mountPointsTable->setItem(iRow, 3, it);
570 it = new QTableWidgetItem(longitude);
571 _mountPointsTable->setItem(iRow, 4, it);
572 } else {
573 it = new QTableWidgetItem(latitude);
574 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
575 _mountPointsTable->setItem(iRow, 3, it);
576 it = new QTableWidgetItem(longitude);
577 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
578 _mountPointsTable->setItem(iRow, 4, it);
579 }
580
581 it = new QTableWidgetItem(nmea);
582 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
583 _mountPointsTable->setItem(iRow, 5, it);
584
585 bncTableItem* bncIt = new bncTableItem();
586 bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
587 _mountPointsTable->setItem(iRow, 6, bncIt);
588
589 iRow++;
590 }
591
592 _mountPointsTable->sortItems(1);
593}
594
595// Retrieve Table
596////////////////////////////////////////////////////////////////////////////
597void bncWindow::slotAddMountPoints() {
598
599 QSettings settings;
600 QString proxyHost = settings.value("proxyHost").toString();
601 int proxyPort = settings.value("proxyPort").toInt();
602 if (proxyHost != _proxyHostLineEdit->text() ||
603 proxyPort != _proxyPortLineEdit->text().toInt()) {
604 int iRet = QMessageBox::question(this, "Question", "Proxy options "
605 "changed. Use the new ones?",
606 QMessageBox::Yes, QMessageBox::No,
607 QMessageBox::NoButton);
608 if (iRet == QMessageBox::Yes) {
609 settings.setValue("proxyHost", _proxyHostLineEdit->text());
610 settings.setValue("proxyPort", _proxyPortLineEdit->text());
611 }
612 }
613
614 bncTableDlg* dlg = new bncTableDlg(this);
615 dlg->move(this->pos().x()+50, this->pos().y()+50);
616 connect(dlg, SIGNAL(newMountPoints(QStringList*)),
617 this, SLOT(slotNewMountPoints(QStringList*)));
618 dlg->exec();
619 delete dlg;
620
621}
622
623// Delete Selected Mount Points
624////////////////////////////////////////////////////////////////////////////
625void bncWindow::slotDeleteMountPoints() {
626
627 int nRows = _mountPointsTable->rowCount();
628 bool flg[nRows];
629 for (int iRow = 0; iRow < nRows; iRow++) {
630 if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
631 flg[iRow] = true;
632 }
633 else {
634 flg[iRow] = false;
635 }
636 }
637 for (int iRow = nRows-1; iRow >= 0; iRow--) {
638 if (flg[iRow]) {
639 _mountPointsTable->removeRow(iRow);
640 }
641 }
642 _actDeleteMountPoints->setEnabled(false);
643
644 if (_mountPointsTable->rowCount() == 0) {
645 _actGetData->setEnabled(false);
646 }
647}
648
649// New Mount Points Selected
650////////////////////////////////////////////////////////////////////////////
651void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
652 int iRow = 0;
653 QListIterator<QString> it(*mountPoints);
654 while (it.hasNext()) {
655 QStringList hlp = it.next().split(" ");
656 QUrl url(hlp[0]);
657 QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
658 QString format(hlp[1]); QString latitude(hlp[2]); QString longitude(hlp[3]);
659 QString nmea(hlp[4]);
660
661 _mountPointsTable->insertRow(iRow);
662
663 QTableWidgetItem* it;
664 it = new QTableWidgetItem(url.userInfo());
665 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
666 _mountPointsTable->setItem(iRow, 0, it);
667
668 it = new QTableWidgetItem(fullPath);
669 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
670 _mountPointsTable->setItem(iRow, 1, it);
671
672 it = new QTableWidgetItem(format);
673 _mountPointsTable->setItem(iRow, 2, it);
674
675 if (nmea == "yes") {
676 it = new QTableWidgetItem(latitude);
677 _mountPointsTable->setItem(iRow, 3, it);
678 it = new QTableWidgetItem(longitude);
679 _mountPointsTable->setItem(iRow, 4, it);
680 } else {
681 it = new QTableWidgetItem(latitude);
682 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
683 _mountPointsTable->setItem(iRow, 3, it);
684 it = new QTableWidgetItem(longitude);
685 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
686 _mountPointsTable->setItem(iRow, 4, it);
687 }
688
689 it = new QTableWidgetItem(nmea);
690 it->setFlags(it->flags() & ~Qt::ItemIsEditable);
691 _mountPointsTable->setItem(iRow, 5, it);
692
693 bncTableItem* bncIt = new bncTableItem();
694 _mountPointsTable->setItem(iRow, 6, bncIt);
695
696 iRow++;
697 }
698 _mountPointsTable->hideColumn(0);
699 _mountPointsTable->sortItems(1);
700 if (mountPoints->count() > 0 && !_actStop->isEnabled()) {
701 _actGetData->setEnabled(true);
702 }
703 delete mountPoints;
704}
705
706// Save Options
707////////////////////////////////////////////////////////////////////////////
708void bncWindow::slotSaveOptions() {
709 QSettings settings;
710 settings.setValue("proxyHost", _proxyHostLineEdit->text());
711 settings.setValue("proxyPort", _proxyPortLineEdit->text());
712 settings.setValue("waitTime", _waitTimeSpinBox->value());
713 settings.setValue("obsRate", _obsRateComboBox->currentText());
714 settings.setValue("adviseFail", _adviseFailSpinBox->value());
715 settings.setValue("adviseReco", _adviseRecoSpinBox->value());
716 settings.setValue("makePause", _makePauseCheckBox->checkState());
717 settings.setValue("outFile", _outFileLineEdit->text());
718 settings.setValue("perfIntr", _perfIntrComboBox->currentText());
719 settings.setValue("outPort", _outPortLineEdit->text());
720 settings.setValue("outUPort", _outUPortLineEdit->text());
721 settings.setValue("outEphPort", _outEphPortLineEdit->text());
722 settings.setValue("corrPort", _corrPortLineEdit->text());
723 settings.setValue("corrTime", _corrTimeSpinBox->value());
724 settings.setValue("rnxPath", _rnxPathLineEdit->text());
725 settings.setValue("ephPath", _ephPathLineEdit->text());
726 settings.setValue("corrPath", _corrPathLineEdit->text());
727 settings.setValue("rnxScript", _rnxScrpLineEdit->text());
728 settings.setValue("rnxIntr", _rnxIntrComboBox->currentText());
729 settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
730 settings.setValue("ephIntr", _ephIntrComboBox->currentText());
731 settings.setValue("corrIntr", _corrIntrComboBox->currentText());
732 settings.setValue("rnxSampl", _rnxSamplSpinBox->value());
733 settings.setValue("binSampl", _binSamplSpinBox->value());
734 settings.setValue("rnxSkel", _rnxSkelLineEdit->text());
735 settings.setValue("rnxAppend", _rnxAppendCheckBox->checkState());
736 settings.setValue("autoStart", _autoStartCheckBox->checkState());
737 settings.setValue("rnxV3", _rnxV3CheckBox->checkState());
738 settings.setValue("ephV3", _ephV3CheckBox->checkState());
739 settings.setValue("logFile", _logFileLineEdit->text());
740 settings.setValue("adviseScript",_adviseScriptLineEdit->text());
741 settings.setValue("miscMount", _miscMountLineEdit->text());
742 settings.setValue("scanRTCM", _scanRTCMCheckBox->checkState());
743 settings.setValue("serialPortName", _serialPortNameLineEdit->text());
744 settings.setValue("serialMountPoint", _serialMountPointLineEdit->text());
745 settings.setValue("serialBaudRate", _serialBaudRateComboBox->currentText());
746 settings.setValue("serialParity", _serialParityComboBox->currentText());
747 settings.setValue("serialDataBits", _serialDataBitsComboBox->currentText());
748 settings.setValue("serialStopBits", _serialStopBitsComboBox->currentText());
749 settings.setValue("serialAutoNMEA", _serialAutoNMEACheckBox->checkState());
750
751 QStringList mountPoints;
752
753 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
754 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
755 "@" + _mountPointsTable->item(iRow, 1)->text() );
756
757 mountPoints.append(url.toString() + " " +
758 _mountPointsTable->item(iRow, 2)->text()
759 + " " + _mountPointsTable->item(iRow, 3)->text()
760 + " " + _mountPointsTable->item(iRow, 4)->text()
761 + " " + _mountPointsTable->item(iRow, 5)->text());
762 }
763 settings.setValue("mountPoints", mountPoints);
764 if (_caster) {
765 _caster->slotReadMountPoints();
766 }
767}
768
769// All get slots terminated
770////////////////////////////////////////////////////////////////////////////
771void bncWindow::slotGetThreadErrors() {
772 ((bncApp*)qApp)->slotMessage("All Get Threads Terminated", true);
773 if (!_actStop->isEnabled()) {
774 _actGetData->setEnabled(true);
775 }
776}
777
778// Retrieve Data
779////////////////////////////////////////////////////////////////////////////
780void bncWindow::slotGetData() {
781 slotSaveOptions();
782
783 _actDeleteMountPoints->setEnabled(false);
784 _actGetData->setEnabled(false);
785 _actStop->setEnabled(true);
786
787 _caster = new bncCaster(_outFileLineEdit->text(),
788 _outPortLineEdit->text().toInt());
789
790 ((bncApp*)qApp)->setPort(_outEphPortLineEdit->text().toInt());
791 ((bncApp*)qApp)->setPortCorr(_corrPortLineEdit->text().toInt());
792
793 connect(_caster, SIGNAL(getThreadErrors()),
794 this, SLOT(slotGetThreadErrors()));
795
796 connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
797 this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
798
799 ((bncApp*)qApp)->slotMessage("============ Start BNC ============", true);
800
801 _caster->slotReadMountPoints();
802}
803
804// Retrieve Data
805////////////////////////////////////////////////////////////////////////////
806void bncWindow::slotStop() {
807 int iRet = QMessageBox::question(this, "Stop", "Stop retrieving data?",
808 QMessageBox::Yes, QMessageBox::No,
809 QMessageBox::NoButton);
810 if (iRet == QMessageBox::Yes) {
811 delete _caster; _caster = 0;
812 _actGetData->setEnabled(true);
813 _actStop->setEnabled(false);
814 }
815}
816
817// Close Application gracefully
818////////////////////////////////////////////////////////////////////////////
819void bncWindow::closeEvent(QCloseEvent* event) {
820
821 int iRet = QMessageBox::question(this, "Close", "Save Options?",
822 QMessageBox::Yes, QMessageBox::No,
823 QMessageBox::Cancel);
824
825 if (iRet == QMessageBox::Cancel) {
826 event->ignore();
827 return;
828 }
829 else if (iRet == QMessageBox::Yes) {
830 slotSaveOptions();
831 }
832
833 QMainWindow::closeEvent(event);
834}
835
836// User changed the selection of mountPoints
837////////////////////////////////////////////////////////////////////////////
838void bncWindow::slotSelectionChanged() {
839 if (_mountPointsTable->selectedItems().isEmpty()) {
840 _actDeleteMountPoints->setEnabled(false);
841 }
842 else {
843 _actDeleteMountPoints->setEnabled(true);
844 }
845}
846
847// Display Program Messages
848////////////////////////////////////////////////////////////////////////////
849void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
850
851#ifdef DEBUG_RTCM2_2021
852 const int maxBufferSize = 1000;
853#else
854 const int maxBufferSize = 10000;
855#endif
856
857 if (! showOnScreen ) {
858 return;
859 }
860
861 QString txt = _log->toPlainText() + "\n" +
862 QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg;
863 _log->clear();
864 _log->append(txt.right(maxBufferSize));
865}
866
867// About Message
868////////////////////////////////////////////////////////////////////////////
869void bncWindow::slotAbout() {
870 new bncAboutDlg(0);
871}
872
873//Flowchart
874////////////////////////////////////////////////////////////////////////////
875void bncWindow::slotFlowchart() {
876 new bncFlowchartDlg(0);
877}
878
879// Help Window
880////////////////////////////////////////////////////////////////////////////
881void bncWindow::slotHelp() {
882 QUrl url;
883 url.setPath(":bnchelp.html");
884 new bncHlpDlg(0, url);
885}
886
887// Select Fonts
888////////////////////////////////////////////////////////////////////////////
889void bncWindow::slotFontSel() {
890 bool ok;
891 QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
892 if (ok) {
893 QSettings settings;
894 settings.setValue("font", newFont.toString());
895 QApplication::setFont(newFont);
896 int ww = QFontMetrics(newFont).width('w');
897 setMinimumSize(60*ww, 80*ww);
898 resize(60*ww, 80*ww);
899 }
900}
901
902// Whats This Help
903void bncWindow::slotWhatsThis() {
904 QWhatsThis::enterWhatsThisMode();
905}
906
907//
908////////////////////////////////////////////////////////////////////////////
909void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
910 populateMountPointsTable();
911 QSettings settings;
912 _binSamplSpinBox->setValue(settings.value("binSampl").toInt());
913 _waitTimeSpinBox->setValue(settings.value("waitTime").toInt());
914 QListIterator<bncGetThread*> iTh(threads);
915 while (iTh.hasNext()) {
916 bncGetThread* thread = iTh.next();
917 for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
918 QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
919 "@" + _mountPointsTable->item(iRow, 1)->text() );
920 if (url == thread->mountPoint() &&
921 _mountPointsTable->item(iRow, 3)->text() == thread->latitude() &&
922 _mountPointsTable->item(iRow, 4)->text() == thread->longitude() ) {
923 ((bncTableItem*) _mountPointsTable->item(iRow, 6))->setGetThread(thread);
924 break;
925 }
926 }
927 }
928}
929
930//
931////////////////////////////////////////////////////////////////////////////
932void bncWindow::CreateMenu() {
933 // Create Menus
934 // ------------
935 _menuFile = menuBar()->addMenu(tr("&File"));
936 _menuFile->addAction(_actFontSel);
937 _menuFile->addSeparator();
938 _menuFile->addAction(_actSaveOpt);
939 _menuFile->addSeparator();
940 _menuFile->addAction(_actQuit);
941
942 _menuHlp = menuBar()->addMenu(tr("&Help"));
943 _menuHlp->addAction(_actHelp);
944 _menuHlp->addAction(_actFlowchart);
945 _menuHlp->addAction(_actAbout);
946}
947
948//
949////////////////////////////////////////////////////////////////////////////
950void bncWindow::AddToolbar() {
951 // Tool (Command) Bar
952 // ------------------
953 QToolBar* toolBar = new QToolBar;
954 addToolBar(Qt::BottomToolBarArea, toolBar);
955 toolBar->setMovable(false);
956 toolBar->addAction(_actAddMountPoints);
957 toolBar->addAction(_actDeleteMountPoints);
958 toolBar->addAction(_actGetData);
959 toolBar->addAction(_actStop);
960 toolBar->addWidget(new QLabel(" "));
961 toolBar->addAction(_actwhatsthis);
962}
963
964//
965////////////////////////////////////////////////////////////////////////////
966bncAboutDlg::bncAboutDlg(QWidget* parent) :
967 QDialog(parent) {
968
969 QTextBrowser* tb = new QTextBrowser;
970 QUrl url; url.setPath(":bncabout.html");
971 tb->setSource(url);
972 tb->setReadOnly(true);
973
974 int ww = QFontMetrics(font()).width('w');
975 QPushButton* _closeButton = new QPushButton("Close");
976 _closeButton->setMaximumWidth(10*ww);
977 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
978
979 QGridLayout* dlgLayout = new QGridLayout();
980 QLabel* img = new QLabel();
981 img->setPixmap(QPixmap(":ntrip-logo.png"));
982 dlgLayout->addWidget(img, 0,0);
983 dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version 1.7"), 0,1);
984 dlgLayout->addWidget(tb,1,0,1,2);
985 dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
986
987 setLayout(dlgLayout);
988 resize(60*ww, 60*ww);
989 show();
990}
991
992//
993////////////////////////////////////////////////////////////////////////////
994bncAboutDlg::~bncAboutDlg() {
995};
996
997//
998////////////////////////////////////////////////////////////////////////////
999bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
1000 QDialog(parent) {
1001
1002 int ww = QFontMetrics(font()).width('w');
1003 QPushButton* _closeButton = new QPushButton("Close");
1004 _closeButton->setMaximumWidth(10*ww);
1005 connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
1006
1007 QGridLayout* dlgLayout = new QGridLayout();
1008 QLabel* img = new QLabel();
1009 img->setPixmap(QPixmap(":bncflowchart.png"));
1010 dlgLayout->addWidget(img, 0,0);
1011 dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
1012
1013 setLayout(dlgLayout);
1014 show();
1015}
1016
1017//
1018////////////////////////////////////////////////////////////////////////////
1019bncFlowchartDlg::~bncFlowchartDlg() {
1020};
1021
Note: See TracBrowser for help on using the repository browser.