| [9769] | 1 | # Changelog
|
|---|
| [10535] | 2 | ## 2.13.1 (2024-0?-??)
|
|---|
| 3 | - FIXED: obs types from skl file can be used now to write them into RINEX version 3 AND 4 observation files as configured
|
|---|
| 4 | - FIXED: **Bug in IGS SSR Epoch Time (BDS and GLO)**, which is defined as follows: Full seconds since the beginning of the week of continuous time scale with no offset from GPS, Galileo, QZSS, SBAS, **UTC leap seconds from GLONASS, -14 s offset from BDS**
|
|---|
| [10544] | 5 | - ADDED: data field range checks within RTCM3 Ephemeris decoders mainly regarding TOC and TOE
|
|---|
| [10535] | 6 | - ADDED: decoder string 'ZERO2FILE': Using this, BNC allows to by-pass its decoders and directly save the input in daily log files
|
|---|
| 7 | - CHANGED: decoder string 'ZERO': means that the raw data are forwarded only
|
|---|
| 8 |
|
|---|
| 9 |
|
|---|
| [10466] | 10 | ## 2.13.1 (2024-04-30)
|
|---|
| 11 | - FIXED: Health status of Galileo satellites is now determined by the combination of HS, DVS and SISA [(#174)](https://software.rtcm-ntrip.org/ticket/174)
|
|---|
| [10329] | 12 | - FIXED: Bug regarding the reading of the RINEX Version 4 Navigation files
|
|---|
| [10446] | 13 | - FIXED: Bug regarding the flexibel usage of any port in secure mode
|
|---|
| [10466] | 14 | - ADDED: A check in PPP and combination mode if stored ephemerides are still valid [(#176)](https://software.rtcm-ntrip.org/ticket/176)
|
|---|
| 15 | - ADDED: A SIGHUP signal to BNC will result into a reload of its configuration file [(#179)](https://software.rtcm-ntrip.org/ticket/179)
|
|---|
| 16 | - ADDED: The possibility to exclude satellites or satellite systems for individual ACs from the combination.
|
|---|
| 17 | - ADDED: The possibility to ignore orbit corrections from an indiviul AC that differ by more than 'Maximal Orb Displacement' meters from the average of all orbit corrections per satellite.
|
|---|
| [10329] | 18 | - CHANGED: hDOP and vDOP values are computed from the variances of the NEU components of the receiver position estimates
|
|---|
| [10466] | 19 | - CHANGED: Sampling interval for Manual NMEA can be used now in the Auto NMEA option as well [(#122)](https://software.rtcm-ntrip.org/ticket/122)
|
|---|
| [10329] | 20 |
|
|---|
| [10446] | 21 |
|
|---|
| [10265] | 22 | ## 2.13.0 (2023-12-01)
|
|---|
| [10283] | 23 | - ADDED: **RINEX Version 4 Support** (in navigation files currently the EPH message type is considered only)
|
|---|
| [10265] | 24 | - ADDED: **PPP Client Upgrade**
|
|---|
| 25 | - ADDED: Multi-GNSS-PPP using uncombined code and/or phase data of two frequencies
|
|---|
| 26 | - ADDED: Multi-GNSS-PPP using uncombined code and/or phase data of one frequency
|
|---|
| 27 | - ADDED: Ionospheric constraints in form of pseudo observations can be added
|
|---|
| 28 | - ADDED: **Ntrip Version 2.0 Upload including TLS**
|
|---|
| 29 | - ADDED: **Multi-GNSS Satellite Clock Combination**
|
|---|
| [10285] | 30 | - ADDED: Individual code biases will be considered before satellite clocks are combined
|
|---|
| [10265] | 31 | - ADDED: Satellite clock combination result includes code biases
|
|---|
| [9769] | 32 | - ADDED: Ephemerides upload for different systems in parallel
|
|---|
| [10265] | 33 | - ADDED: **Multi-GNSS SP3, Clock RINEX and SINEX Bias** support
|
|---|
| [9769] | 34 | - ADDED: QC multipath analysis for more than two signals
|
|---|
| [10265] | 35 | - ADDED: Transition from Qt4 to **Qt5**
|
|---|
| [9769] | 36 |
|
|---|
| 37 |
|
|---|
| 38 | ## 2.12.19 (2022-04-04)
|
|---|
| 39 | - CHANGED: Minimum combination sampling interval
|
|---|
| 40 |
|
|---|
| [10329] | 41 |
|
|---|
| [9769] | 42 | ## 2.12.18 (2021-09-28)
|
|---|
| [10329] | 43 | - FIXED: Bug in ephemeris check
|
|---|
| 44 | - ADDED: Satellite antenna phase center correction
|
|---|
| 45 | - CHANGED: Some OSM updates to force https usage and another crossOriginKeyword
|
|---|
| 46 | - CHANGED: Signal usage in BDS PPP
|
|---|
| [9769] | 47 |
|
|---|
| [10329] | 48 |
|
|---|
| [9769] | 49 | ## 2.12.17 (2021-04-20)
|
|---|
| [10329] | 50 | - FIXED: Bug in SSR GLONASS upload
|
|---|
| 51 | - FIXED: Redundant output concerning unhealthy satellites
|
|---|
| 52 | - ADDED: One more line with satellite health flags for the GLONASS navigation message as defined in RINEX v. 3.05
|
|---|
| [9769] | 53 |
|
|---|
| [10329] | 54 |
|
|---|
| [9769] | 55 | ## 2.12.16 (2021-02-25)
|
|---|
| [10329] | 56 | - FIXED: Bug in IRNSS ephemeris encoding / decoding
|
|---|
| 57 | - FIXED: Bug in RTCM3coDecoder regrading SSR format
|
|---|
| 58 | - FIXED: Bug regarding consideration of incoming ephemerides
|
|---|
| 59 | - FIXED: Bug regarding latency check
|
|---|
| 60 | - FIXED: Relativistic effects are adapted with respect to the respective GNSS ICD
|
|---|
| 61 | - FIXED: Bug regarding the generation of combined SSR orbit and clock messages
|
|---|
| 62 | - FIXED: Bug within ephemeris check
|
|---|
| 63 | - ADDED: Check to prevent the same eph data sets with different TOC values
|
|---|
| 64 | - CHANGED: A priori coordinates within examples are updated
|
|---|
| 65 | - CHANGED: Changes to prevent erroneous ephemeris data sets from usage in combination
|
|---|
| 66 | - CHANGED: Small format adaptations regarding latency check
|
|---|
| 67 | - CHANGED: Range of MSM messages enlarged to 1237
|
|---|
| 68 | - CHANGED: PPP map now with OSM only
|
|---|
| [9769] | 69 |
|
|---|
| [10329] | 70 |
|
|---|
| [9769] | 71 | ## 2.12.15 (2020-11-10)
|
|---|
| [10329] | 72 | - FIXED: Cleanup of the example configurations
|
|---|
| 73 | - FIXED: Bug regarding long mountpoint names in latency check and latency plots
|
|---|
| 74 | - FIXED: Bug in clock rinex header line
|
|---|
| 75 | - ADDED: Ephemeris checks and related debugging output
|
|---|
| 76 | - ADDED: Check if orbit and clock corrections are out of range
|
|---|
| 77 | - CHANGED: Cleanup of the relativistic effects w.r.t. IGS-SSR
|
|---|
| [9769] | 78 |
|
|---|
| 79 | ## 2.12.14 (2020-09-04)
|
|---|
| [10329] | 80 | - ADDED: Encoding and decoding of IGS-SSR messages
|
|---|
| 81 | - ADDED: B2b/7D BDS in signal mapping for MSM
|
|---|
| 82 | - CHANGED: IRNSS experimental in official ephemeris message number
|
|---|
| 83 | - CHANGED: Lock Time Indicator is replaced by cycle slip counter in feed engine output
|
|---|
| [9769] | 84 |
|
|---|
| 85 | ## 2.12.13 (2020-06-09)
|
|---|
| [10329] | 86 | - FIXED: QZSS fit Interval is specified as flag in RINEX 3.04
|
|---|
| 87 | - CHANGED: BDS SSR IOD is changed from 24 into 8 bit
|
|---|
| 88 | - CHANGED: BDS and QZSS SSR signal and tracking mode is adapted
|
|---|
| [9769] | 89 |
|
|---|
| 90 | ## 2.12.12 (2020-01-21)
|
|---|
| [10329] | 91 | - ADDED: GPS and QZSS fit Interval in hours
|
|---|
| 92 | - CHANGED: Epehmeris check
|
|---|
| [9769] | 93 |
|
|---|
| 94 | ## 2.12.11 (2019-11-08)
|
|---|
| [10329] | 95 | - CHANGED:: Harmonization of RTCM3 Signal ID Mapping and RTCM SSR Signal and Tracking Mode Identifiers for BDS and QZSS
|
|---|
| [9769] | 96 |
|
|---|
| 97 | ## 2.12.10 (2019-10-02)
|
|---|
| [10329] | 98 | - FIXED: Multiple message indicator in SSR messages
|
|---|
| 99 | - FIXED: GLONASS message frame time written into RINEX files
|
|---|
| 100 | - ADDED: IRNSS ephemeris support in RTCM3 Encoder
|
|---|
| 101 | - ADDED: IRNSS MSM and ephemeris support in RTCM3 Decoder
|
|---|
| 102 | - CHANGED: RTCM signal mapping IDs for GLONASS
|
|---|
| 103 | - CHANGED: RTCM signal mapping IDs for BDS based on RTCM BDSWG proposal from 9/2019 as far as consistent with RINEX v 3.04
|
|---|
| 104 | - CHANGED: Up to 64 BDS prn codes are supported now
|
|---|
| [9769] | 105 |
|
|---|
| [10329] | 106 |
|
|---|
| [9769] | 107 | ## 2.12.9 (2019-05-20)
|
|---|
| [10329] | 108 | - FIXED: Method to read the RTNET data buffer
|
|---|
| 109 | - FIXED: Typo in rtnet2ssr transition for ssr upload
|
|---|
| 110 | - CHANGED: Number of possible phase biases for SSR upload are enlarged to 100
|
|---|
| 111 | - CHANGED: Missing phase biases are added within rtnet2ssr transition for ssr upload
|
|---|
| [9769] | 112 |
|
|---|
| [10329] | 113 |
|
|---|
| [9769] | 114 | ## 2.12.8 (2019-05-06)
|
|---|
| [10329] | 115 | - FIXED: Bug with respect to GLONASS upload
|
|---|
| 116 | - FIXED: Bug in NMEA output
|
|---|
| 117 | - CHANGED: Transformation parameters from ITRF2014 into DFREF91
|
|---|
| 118 | - CHANGED: Transformation parameters from ITRF2014 into ETRF2000
|
|---|
| 119 | - CHANGED: GLONASS ephemerides validity is now up to 2 hours.
|
|---|
| 120 | - CHANGED: Check with respect to wrong observation epochs
|
|---|
| [9769] | 121 |
|
|---|
| [10329] | 122 |
|
|---|
| [9769] | 123 | ## 2.12.7 (2019-04-03)
|
|---|
| [10329] | 124 | - FIXED: Bug in NMEA checksum
|
|---|
| 125 | - FIXED: Bug in RINEX file concatenation
|
|---|
| 126 | - FIXED: Bug in RTCM3 ephemeris message for QZSS
|
|---|
| 127 | - FIXED: Bug in RTCM3 ephemeris message for BDS and SBAS
|
|---|
| 128 | - FIXED: RINEX version 3 filenames for re-sampled files
|
|---|
| 129 | - FIXED: Bug in reqc ephemeris check
|
|---|
| 130 | - FIXED: Bug in RINEX file concatenation
|
|---|
| 131 | - FIXED: Bug in ephemeris upload
|
|---|
| 132 | - FIXED: Bug in ephemeris check
|
|---|
| 133 | - FIXED: Bug in latency check
|
|---|
| 134 | - FIXED: Galileo geocentric gravitational constant is corrected
|
|---|
| 135 | - FIXED: Encoding/decoding of all missing parameters in MT 1020
|
|---|
| 136 | - FIXED: Bug in RTCM3 MSM Decoder
|
|---|
| 137 | - ADDED: Updates regarding RINEX Version 3.04
|
|---|
| 138 | - ADDED: Lock time in seconds as an optional feed engine output
|
|---|
| 139 | - ADDED: Two more polynomial coefficients of the SSR clock correction message
|
|---|
| 140 | - ADDED: One more parameter to describe the SSR URA
|
|---|
| 141 | - ADDED: Decoding of receiver descriptor in MT 1033
|
|---|
| 142 | - ADDED: Satellite health check
|
|---|
| 143 | - ADDED: IRNSS support in RINEX QC
|
|---|
| 144 | - CHANGED: Parameters for transformation of orbit and clock corrections from ITRF 2014 into ETRF2000 and DREF91,
|
|---|
| 145 | - CHANGED: No updated transformation parameters for NDA83 available, hence deleted
|
|---|
| 146 | - CHANGED: Allow 10 Hz observation data processing and re-sampling
|
|---|
| 147 | - CHANGED: SSR SBAS and BDS satellite IDs with respect to the proposal
|
|---|
| 148 | - CHANGED: Transformation of orbit and clock corrections into ETRF2000, NDA83 or DREF91 is done temporarily via ITRF2008
|
|---|
| [9769] | 149 |
|
|---|
| [10329] | 150 |
|
|---|
| [9769] | 151 | ## 2.12.6 (2017-09-26)
|
|---|
| [10329] | 152 | - FIXED:: GPS SSR Orbit IOD has to be GPS IODE, not IODC
|
|---|
| [9769] | 153 |
|
|---|
| 154 | ## 2.12.5 (2017-08-30)
|
|---|
| 155 | - CHANGED: RTCM message number for BDS is updated
|
|---|
| 156 |
|
|---|
| 157 | ## 2.12.4 (2017-04-10)
|
|---|
| [10329] | 158 | - CHANGED: SIRGAS2000 transformation parameters adjusted to IGb14
|
|---|
| 159 | - CHANGED: Transformation parameters for ITRF2005 to GDA94 removed
|
|---|
| 160 | - CHANGED: Transformation parameters for ITRF2008 to SIRGAS95 removed
|
|---|
| 161 | - CHANGED: Transformation parameters for ITRF2014 to GDA2020 added
|
|---|
| [9769] | 162 |
|
|---|
| 163 | ## 2.12.3 (2016-09-05)
|
|---|
| [10329] | 164 | - FIXED: Check regarding wrong observation epochs is done during latency check as well to prevent erroneous latencies
|
|---|
| 165 | - FIXED: Map generation from sourcetable entry
|
|---|
| 166 | - FIXED: Re-implementation of the well proven approach (from BNC version 2.11) on how to wait for clock corrections in PPP mode
|
|---|
| 167 | - FIXED: Some NMEA components in PPP output: Time stamp is now UTC, hDop value instead pDop value
|
|---|
| 168 | - FIXED: RINEX 2.11 ephemeris output for an unknown transmission time
|
|---|
| 169 | - ADDED: Number of allowed SSR biases is enlarged,
|
|---|
| 170 | -ADDED: Some future GLONASS signal and tracking mode identifiers
|
|---|
| 171 | - ADDED: Data source information as comment within RINEX navigation file header
|
|---|
| 172 | - ADDED: Frequency specific signal priorities are for RINEX v3 to RINEX v2 conversion
|
|---|
| 173 | - ADDED: Consideration of provider ID changes in SSR streams during PPP analysis
|
|---|
| 174 | - CHANGED: Small adaptations in qwtpolar sources to allow a successful compilation of BNC on a Raspberry Pi
|
|---|
| 175 | - CHANGED: The real satellite visibility is considered, if the expected observations are computed in RINEX QC
|
|---|
| [9769] | 176 |
|
|---|
| [10329] | 177 |
|
|---|
| [9769] | 178 | ## 2.12.2 (2016-05-18)
|
|---|
| [10329] | 179 | - FIXED: Wrong RINEX v2 header line excluded
|
|---|
| 180 | - ADDED: Expected observations in RINEX QC
|
|---|
| 181 | - ADDED: Limits for spherical harmonics/degree order extended
|
|---|
| [9769] | 182 |
|
|---|
| 183 | ## 2.12.1 (2016-04-21)
|
|---|
| [10329] | 184 | - FIXED: RINEX v2 file naming for observation files
|
|---|
| 185 | - CHANGED: Release number is now part of BNC version
|
|---|
| [9769] | 186 |
|
|---|
| 187 | ## 2.12.0 (2016-04-19)
|
|---|
| 188 |
|
|---|
