source: ntrip/branches/BNC_2.12/src/bncwindow.cpp @ 9251

Last change on this file since 9251 was 9251, checked in by stuerze, 5 months ago

minor changes and small bug fixed

File size: 149.3 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70#  include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83  const static QPalette paletteWhite(QColor(255, 255, 255));
84  const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87  BNC_CORE->setConfFileName("");
88#endif
89
90  _caster    = 0;
91  _casterEph = 0;
92
93  _bncFigure     = new bncFigure(this);
94  _bncFigureLate = new bncFigureLate(this);
95  _bncFigurePPP  = new bncFigurePPP(this);
96
97  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
102
103  _runningRealTime    = false;
104  _runningPPP         = false;
105  _runningEdit        = false;
106  _runningQC          = false;
107  _runningSp3Comp     = false;
108  _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110  _mapWin = 0;
111
112  int ww = QFontMetrics(this->font()).width('w');
113
114  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116  setMinimumSize(100*ww, 70*ww);
117
118  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121          this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123  // Create Actions
124  // --------------
125  _actHelp = new QAction(tr("&Help Contents"),this);
126  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128  _actAbout = new QAction(tr("&About BNC"),this);
129  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131  _actFlowchart = new QAction(tr("&Flow Chart"),this);
132  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134  _actFontSel = new QAction(tr("Select &Font"),this);
135  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140  _actQuit  = new QAction(tr("&Quit"),this);
141  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148  _actDeleteMountPoints->setEnabled(false);
149
150  _actMapMountPoints = new QAction(tr("&Map"),this);
151  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153  _actStart = new QAction(tr("Sta&rt"),this);
154  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156  _actStop = new QAction(tr("Sto&p"),this);
157  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158  connect(_actStop, SIGNAL(triggered()), SLOT(slotMapPPPClosed()));
159
160  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
161  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
162
163  CreateMenu();
164  AddToolbar();
165
166  bncSettings settings;
167
168  // Network Options
169  // ---------------
170  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
171  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
172
173  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
174          this, SLOT(slotBncTextChanged()));
175
176  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
177  _sslIgnoreErrorsCheckBox = new QCheckBox();
178  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
179                                          settings.value("sslIgnoreErrors").toInt()));
180
181  // General Options
182  // ---------------
183  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
184  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
185  _rnxAppendCheckBox  = new QCheckBox();
186  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
187                                    settings.value("rnxAppend").toInt()));
188  _onTheFlyComboBox = new QComboBox();
189  _onTheFlyComboBox->setEditable(false);
190  _onTheFlyComboBox->addItems(QString("no, 1 day,1 hour,5 min,1 min").split(","));
191  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
192  if (ii != -1) {
193    _onTheFlyComboBox->setCurrentIndex(ii);
194  }
195  _autoStartCheckBox  = new QCheckBox();
196  _autoStartCheckBox->setCheckState(Qt::CheckState(
197                                    settings.value("autoStart").toInt()));
198
199  // RINEX Observations Options
200  // --------------------------
201  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
202  _rnxIntrComboBox    = new QComboBox();
203  _rnxIntrComboBox->setEditable(false);
204  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
205  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
206  if (ii != -1) {
207    _rnxIntrComboBox->setCurrentIndex(ii);
208  }
209  _rnxSamplComboBox    = new QComboBox();
210  _rnxSamplComboBox->setEditable(false);
211  _rnxSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
212  int ij = _rnxSamplComboBox->findText(settings.value("rnxSampl").toString());
213  if (ij != -1) {
214    _rnxSamplComboBox->setCurrentIndex(ij);
215  }
216  _rnxFileCheckBox = new QCheckBox();
217  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
218  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
219  _rnxSkelLineEdit->setMaximumWidth(5*ww);
220  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
221  _rnxV3CheckBox      = new QCheckBox();
222  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
223  QString hlp = settings.value("rnxV2Priority").toString();
224  if (hlp.isEmpty()) {
225    hlp = "G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:128&DPX C:7&DPZ I:ABCX S:1&C S:5&IQX";
226  }
227  _rnxV2Priority = new QLineEdit(hlp);
228
229  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
230          this, SLOT(slotBncTextChanged()));
231  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
232          this, SLOT(slotBncTextChanged()));
233
234  // RINEX Ephemeris Options
235  // -----------------------
236  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
237  _ephIntrComboBox    = new QComboBox();
238  _ephIntrComboBox->setEditable(false);
239  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
240  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
241  if (jj != -1) {
242    _ephIntrComboBox->setCurrentIndex(jj);
243  }
244  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
245  _ephV3CheckBox = new QCheckBox();
246  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
247
248  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
249          this, SLOT(slotBncTextChanged()));
250
251  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
252          this, SLOT(slotBncTextChanged()));
253
254  // Broadcast Corrections Options
255  // -----------------------------
256  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
257  _corrIntrComboBox    = new QComboBox();
258  _corrIntrComboBox->setEditable(false);
259  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
260  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
261  if (mm != -1) {
262    _corrIntrComboBox->setCurrentIndex(mm);
263  }
264  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
265
266  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
267          this, SLOT(slotBncTextChanged()));
268
269  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
270          this, SLOT(slotBncTextChanged()));
271
272  // Feed Engine Options
273  // -------------------
274  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
275  _outWaitSpinBox   = new QSpinBox();
276  _outWaitSpinBox->setMinimum(0);
277  _outWaitSpinBox->setMaximum(30);
278  _outWaitSpinBox->setSingleStep(1);
279  _outWaitSpinBox->setSuffix(" sec");
280  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
281  _outSamplComboBox    = new QComboBox();
282  _outSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
283  int nn = _outSamplComboBox->findText(settings.value("outSampl").toString());
284    if (nn != -1) {
285      _outSamplComboBox->setCurrentIndex(nn);
286    }
287  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
288  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
289  _outLockTimeCheckBox = new QCheckBox();
290  _outLockTimeCheckBox->setCheckState(Qt::CheckState(settings.value("outLockTime").toInt()));
291
292  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
293          this, SLOT(slotBncTextChanged()));
294
295  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
296          this, SLOT(slotBncTextChanged()));
297
298  connect(_outLockTimeCheckBox, SIGNAL(stateChanged(int)),
299          this, SLOT(slotBncTextChanged()));
300
301  // Serial Output Options
302  // ---------------------
303  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
304  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
305  _serialBaudRateComboBox = new QComboBox();
306  _serialBaudRateComboBox->addItems(QString("110,300,600,"
307            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
308  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
309  if (kk != -1) {
310    _serialBaudRateComboBox->setCurrentIndex(kk);
311  }
312  _serialFlowControlComboBox = new QComboBox();
313  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
314  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
315  if (kk != -1) {
316    _serialFlowControlComboBox->setCurrentIndex(kk);
317  }
318  _serialDataBitsComboBox = new QComboBox();
319  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
320  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
321  if (kk != -1) {
322    _serialDataBitsComboBox->setCurrentIndex(kk);
323  }
324  _serialParityComboBox   = new QComboBox();
325  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
326  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
327  if (kk != -1) {
328    _serialParityComboBox->setCurrentIndex(kk);
329  }
330  _serialStopBitsComboBox = new QComboBox();
331  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
332  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
333  if (kk != -1) {
334    _serialStopBitsComboBox->setCurrentIndex(kk);
335  }
336  _serialAutoNMEAComboBox  = new QComboBox();
337  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
338  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
339  if (kk != -1) {
340    _serialAutoNMEAComboBox->setCurrentIndex(kk);
341  }
342  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
343  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
344
345  _serialManualNMEASamplingSpinBox = new QSpinBox();
346  _serialManualNMEASamplingSpinBox->setMinimum(0);
347  _serialManualNMEASamplingSpinBox->setMaximum(300);
348  _serialManualNMEASamplingSpinBox->setSingleStep(10);
349  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
350  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
351
352  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
353          this, SLOT(slotBncTextChanged()));
354
355  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
356          this, SLOT(slotBncTextChanged()));
357
358  // Outages Options
359  // ---------------
360  _adviseObsRateComboBox    = new QComboBox();
361  _adviseObsRateComboBox->setEditable(false);
362  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
363  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
364  if (kk != -1) {
365    _adviseObsRateComboBox->setCurrentIndex(kk);
366  }
367  _adviseFailSpinBox = new QSpinBox();
368  _adviseFailSpinBox->setMinimum(0);
369  _adviseFailSpinBox->setMaximum(60);
370  _adviseFailSpinBox->setSingleStep(1);
371  _adviseFailSpinBox->setSuffix(" min");
372  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
373  _adviseRecoSpinBox = new QSpinBox();
374  _adviseRecoSpinBox->setMinimum(0);
375  _adviseRecoSpinBox->setMaximum(60);
376  _adviseRecoSpinBox->setSingleStep(1);
377  _adviseRecoSpinBox->setSuffix(" min");
378  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
379  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
380
381  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
382          this, SLOT(slotBncTextChanged()));
383
384  // Miscellaneous Options
385  // ---------------------
386  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
387  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
388  _miscIntrComboBox   = new QComboBox();
389  _miscIntrComboBox->setEditable(false);
390  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
391  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
392  if (ll != -1) {
393    _miscIntrComboBox->setCurrentIndex(ll);
394  }
395  _miscScanRTCMCheckBox  = new QCheckBox();
396  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
397                                    settings.value("miscScanRTCM").toInt()));
398
399  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
400          this, SLOT(slotBncTextChanged()));
401
402  // Streams
403  // -------
404  _mountPointsTable   = new QTableWidget(0,9);
405
406  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
407  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
408  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
409  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
410  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
411  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
412  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
413  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
414  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
415  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
416  _mountPointsTable->setHorizontalHeaderLabels(labels);
417  _mountPointsTable->setGridStyle(Qt::NoPen);
418  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
419  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
420  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
421  _mountPointsTable->hideColumn(0);
422  _mountPointsTable->hideColumn(3);
423  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
424          SLOT(slotSelectionChanged()));
425  populateMountPointsTable();
426
427  _log = new QTextEdit();
428  _log->setReadOnly(true);
429  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
430  _log->setFont(msFont);
431  _log->document()->setMaximumBlockCount(1000);
432
433  // Combine Corrections
434  // -------------------
435  _cmbTable = new QTableWidget(0,3);
436  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
437  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
438  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
439  _cmbTable->setMaximumWidth(30*ww);
440  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
441  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
442  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
443  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
444  _cmbTable->horizontalHeader()->setStretchLastSection(true);
445  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
446
447  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
448  _cmbUseGlonass     = new QCheckBox();
449  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
450
451  _cmbSamplSpinBox = new QSpinBox;
452  _cmbSamplSpinBox->setMinimum(10);
453  _cmbSamplSpinBox->setMaximum(60);
454  _cmbSamplSpinBox->setSingleStep(10);
455  _cmbSamplSpinBox->setMaximumWidth(9*ww);
456  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
457  _cmbSamplSpinBox->setSuffix(" sec");
458
459  QPushButton* addCmbRowButton = new QPushButton("Add Row");
460  QPushButton* delCmbRowButton = new QPushButton("Delete");
461
462  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
463          SLOT(slotBncTextChanged()));
464
465  _cmbMethodComboBox = new QComboBox();
466  _cmbMethodComboBox->setEditable(false);
467  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
468  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
469  if (im != -1) {
470    _cmbMethodComboBox->setCurrentIndex(im);
471  }
472
473  int iRow = _cmbTable->rowCount();
474  if (iRow > 0) {
475    enableWidget(true, _cmbMethodComboBox);
476    enableWidget(true, _cmbMaxresLineEdit);
477    enableWidget(true, _cmbSamplSpinBox);
478    enableWidget(true, _cmbUseGlonass);
479  }
480  else {
481    enableWidget(false, _cmbMethodComboBox);
482    enableWidget(false, _cmbMaxresLineEdit);
483    enableWidget(false, _cmbSamplSpinBox);
484    enableWidget(false, _cmbUseGlonass);
485  }
486
487  // Upload Results
488  // -------------
489  _uploadTable = new QTableWidget(0,13);
490  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, Format, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
491  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
492  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
493  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
494  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
495  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
496  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
497  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
498  _uploadTable->horizontalHeader()->resizeSection( 5,11*ww);
499  _uploadTable->horizontalHeader()->resizeSection( 6, 4*ww);
500  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
501  _uploadTable->horizontalHeader()->resizeSection( 8,15*ww);
502  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
503  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
504  _uploadTable->horizontalHeader()->resizeSection(11, 4*ww);
505  _uploadTable->horizontalHeader()->resizeSection(12,12*ww);
506  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
507  _uploadTable->horizontalHeader()->setStretchLastSection(true);
508  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
509
510  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
511          SLOT(slotBncTextChanged()));
512
513  QPushButton* addUploadRowButton = new QPushButton("Add Row");
514  QPushButton* delUploadRowButton = new QPushButton("Del Row");
515  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
516  _uploadIntrComboBox = new QComboBox;
517  _uploadIntrComboBox->setEditable(false);
518  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
519  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
520  if (ii != -1) {
521    _uploadIntrComboBox->setCurrentIndex(ii);
522  }
523
524  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
525  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
526
527  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
528  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
529  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
530  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
531  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
532  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
533  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
534
535  _uploadSamplSp3SpinBox = new QSpinBox;
536  _uploadSamplSp3SpinBox->setMinimum(0);
537  _uploadSamplSp3SpinBox->setMaximum(15);
538  _uploadSamplSp3SpinBox->setSingleStep(1);
539  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
540  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
541  _uploadSamplSp3SpinBox->setSuffix(" min");
542
543  _uploadSamplClkRnxSpinBox = new QSpinBox;
544  _uploadSamplClkRnxSpinBox->setMinimum(0);
545  _uploadSamplClkRnxSpinBox->setMaximum(60);
546  _uploadSamplClkRnxSpinBox->setSingleStep(5);
547  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
548  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
549  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
550
551  int iRowT = _uploadTable->rowCount();
552  if (iRowT > 0) {
553    enableWidget(true, _uploadIntrComboBox);
554    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
555    enableWidget(true, _uploadSamplSp3SpinBox);
556    enableWidget(true, _uploadSamplClkRnxSpinBox);
557    enableWidget(true, _uploadAntexFile);
558  }
559  else {
560    enableWidget(false, _uploadIntrComboBox);
561    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
562    enableWidget(false, _uploadSamplSp3SpinBox);
563    enableWidget(false, _uploadSamplClkRnxSpinBox);
564    enableWidget(false, _uploadAntexFile);
565  }
566
567  // Upload RTCM3 Ephemeris
568  // ----------------------
569  _uploadEphHostLineEdit       = new QLineEdit(settings.value("uploadEphHost").toString());
570  _uploadEphPortLineEdit       = new QLineEdit(settings.value("uploadEphPort").toString());
571  _uploadEphPasswordLineEdit   = new QLineEdit(settings.value("uploadEphPassword").toString());
572  _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
573  _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
574  _uploadEphSampleSpinBox      = new QSpinBox;
575  _uploadEphSampleSpinBox->setMinimum(5);
576  _uploadEphSampleSpinBox->setMaximum(60);
577  _uploadEphSampleSpinBox->setSingleStep(5);
578  _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
579  _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
580  _uploadEphSampleSpinBox->setSuffix(" sec");
581  _uploadEphBytesCounter       = new bncBytesCounter;
582
583  // Canvas with Editable Fields
584  // ---------------------------
585  _canvas = new QWidget;
586  setCentralWidget(_canvas);
587
588  _aogroup = new QTabWidget();
589  _aogroup->setElideMode(Qt::ElideNone);
590  _aogroup->setUsesScrollButtons(true);
591  QWidget* pgroup = new QWidget();
592  QWidget* ggroup = new QWidget();
593  QWidget* sgroup = new QWidget();
594  QWidget* egroup = new QWidget();
595  QWidget* agroup = new QWidget();
596  QWidget* cgroup = new QWidget();
597  QWidget* ogroup = new QWidget();
598  QWidget* rgroup = new QWidget();
599  QWidget* sergroup = new QWidget();
600  QWidget* pppGroup1 = new QWidget();
601  QWidget* pppGroup2 = new QWidget();
602  QWidget* pppGroup3 = new QWidget();
603  QWidget* pppGroup4 = new QWidget();
604  QWidget* reqcgroup = new QWidget();
605  QWidget* sp3CompGroup = new QWidget();
606  QWidget* cmbgroup = new QWidget();
607  QWidget* uploadgroup = new QWidget();
608  QWidget* uploadEphgroup = new QWidget();
609  _aogroup->addTab(pgroup,tr("Network"));
610  _aogroup->addTab(ggroup,tr("General"));
611  _aogroup->addTab(ogroup,tr("RINEX Observations"));
612  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
613  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
614  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
615  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
616  _aogroup->addTab(sgroup,tr("Feed Engine"));
617  _aogroup->addTab(sergroup,tr("Serial Output"));
618  _aogroup->addTab(agroup,tr("Outages"));
619  _aogroup->addTab(rgroup,tr("Miscellaneous"));
620  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
621  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
622  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
623  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
624  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
625  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
626  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
627
628  // Log Tab
629  // -------
630  _loggroup = new QTabWidget();
631  _loggroup->addTab(_log,tr("Log"));
632  _loggroup->addTab(_bncFigure,tr("Throughput"));
633  _loggroup->addTab(_bncFigureLate,tr("Latency"));
634  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
635
636  // Netowork (Proxy and SSL) Tab
637  // ----------------------------
638  QGridLayout* pLayout = new QGridLayout;
639  pLayout->setColumnMinimumWidth(0,13*ww);
640  _proxyPortLineEdit->setMaximumWidth(9*ww);
641
642  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
643  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
644  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
645  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
646  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
647  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
648  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
649  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
650  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
651  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
652  pLayout->addWidget(new QLabel(""),                                         5, 1);
653  pLayout->setRowStretch(6, 999);
654
655  pgroup->setLayout(pLayout);
656
657  // General Tab
658  // -----------
659  QGridLayout* gLayout = new QGridLayout;
660  gLayout->setColumnMinimumWidth(0,14*ww);
661  _onTheFlyComboBox->setMaximumWidth(9*ww);
662
663  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
664  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
665  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
666  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
667  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
668  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
669  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
670  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
671  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
672  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
673  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
674  gLayout->addWidget(new QLabel(""),                             6, 1);
675  gLayout->setRowStretch(7, 999);
676
677  ggroup->setLayout(gLayout);
678
679  // RINEX Observations
680  // ------------------
681  QGridLayout* oLayout = new QGridLayout;
682  oLayout->setColumnMinimumWidth(0,14*ww);
683  _rnxIntrComboBox->setMaximumWidth(9*ww);
684  _rnxSamplComboBox->setMaximumWidth(9*ww);
685
686  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
687  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
688  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
689  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
690  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
691  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
692  oLayout->addWidget(_rnxSamplComboBox,                             2, 3, Qt::AlignLeft);
693  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
694  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
695  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
696  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
697  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
698  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
699  oLayout->addWidget(new QLabel("Version 2 signal priority"),      5, 0);
700  oLayout->addWidget(_rnxV2Priority,                               5, 1, 1, 15);
701  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
702  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
703  oLayout->addWidget(new QLabel(""),                               7, 1);
704  oLayout->setRowStretch(8, 999);
705
706  ogroup->setLayout(oLayout);
707
708  // RINEX Ephemeris
709  // ---------------
710  QGridLayout* eLayout = new QGridLayout;
711  eLayout->setColumnMinimumWidth(0,14*ww);
712  _ephIntrComboBox->setMaximumWidth(9*ww);
713  _ephOutPortLineEdit->setMaximumWidth(9*ww);
714
715  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
716  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
717  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
718  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
719  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
720  eLayout->addWidget(new QLabel("Port"),                          3, 0);
721  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
722  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
723  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
724  eLayout->setRowStretch(5, 999);
725
726  egroup->setLayout(eLayout);
727
728
729  // Broadcast Corrections
730  // ---------------------
731  QGridLayout* cLayout = new QGridLayout;
732  cLayout->setColumnMinimumWidth(0,14*ww);
733  _corrIntrComboBox->setMaximumWidth(9*ww);
734  _corrPortLineEdit->setMaximumWidth(9*ww);
735
736  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
737  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
738  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
739  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
740  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
741  cLayout->addWidget(new QLabel("Port"),                          3, 0);
742  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
743  cLayout->addWidget(new QLabel(""),                              4, 1);
744  cLayout->setRowStretch(7, 999);
745  cgroup->setLayout(cLayout);
746
747  // Feed Engine
748  // -----------
749  QGridLayout* sLayout = new QGridLayout;
750  sLayout->setColumnMinimumWidth(0,14*ww);
751  _outPortLineEdit->setMaximumWidth(9*ww);
752  _outWaitSpinBox->setMaximumWidth(9*ww);
753  _outSamplComboBox->setMaximumWidth(9*ww);
754  _outUPortLineEdit->setMaximumWidth(9*ww);
755
756  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
757  sLayout->addWidget(new QLabel("Port"),                            1, 0);
758  sLayout->addWidget(_outPortLineEdit,                              1, 1);
759  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
760  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
761  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
762  sLayout->addWidget(_outSamplComboBox,                              2, 1, Qt::AlignLeft);
763  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
764  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
765  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
766  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
767  sLayout->addWidget(new QLabel("Print lock time"),                 5, 0);
768  sLayout->addWidget(_outLockTimeCheckBox,                        5, 1);
769  sLayout->addWidget(new QLabel(""),                                6, 1);
770  sLayout->setRowStretch(7, 999);
771
772  sgroup->setLayout(sLayout);
773
774  // Serial Output
775  // -------------
776  QGridLayout* serLayout = new QGridLayout;
777  serLayout->setColumnMinimumWidth(0,12*ww);
778  _serialBaudRateComboBox->setMaximumWidth(9*ww);
779  _serialFlowControlComboBox->setMaximumWidth(11*ww);
780  _serialDataBitsComboBox->setMaximumWidth(5*ww);
781  _serialParityComboBox->setMaximumWidth(9*ww);
782  _serialStopBitsComboBox->setMaximumWidth(5*ww);
783  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
784  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
785  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
786
787  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
788  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
789  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
790  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
791  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
792  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
793  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
794  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
795  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
796  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
797  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
798  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
799  serLayout->addWidget(_serialParityComboBox,                     4, 3);
800  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
801  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
802  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
803  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
804  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
805  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
806  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
807  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
808  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
809  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
810  serLayout->addWidget(new QLabel(""),                            6, 1);
811  serLayout->setRowStretch(7, 999);
812
813  sergroup->setLayout(serLayout);
814
815  // Outages
816  // -------
817  QGridLayout* aLayout = new QGridLayout;
818  aLayout->setColumnMinimumWidth(0,14*ww);
819  _adviseObsRateComboBox->setMaximumWidth(9*ww);
820  _adviseFailSpinBox->setMaximumWidth(9*ww);
821  _adviseRecoSpinBox->setMaximumWidth(9*ww);
822
823  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
824  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
825  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
826  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
827  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
828  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
829  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
830  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
831  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
832  aLayout->addWidget(new QLabel(""),                              5, 1);
833  aLayout->setRowStretch(6, 999);
834
835  agroup->setLayout(aLayout);
836
837  // Miscellaneous
838  // -------------
839  QGridLayout* rLayout = new QGridLayout;
840  rLayout->setColumnMinimumWidth(0,14*ww);
841  _miscIntrComboBox->setMaximumWidth(9*ww);
842  _miscPortLineEdit->setMaximumWidth(9*ww);
843
844  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
845  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
846  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
847  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
848  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
849  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
850  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
851  rLayout->addWidget(new QLabel("Port"),                          4, 0);
852  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
853  rLayout->addWidget(new QLabel(""),                              5, 1);
854  rLayout->setRowStretch(6, 999);
855
856  rgroup->setLayout(rLayout);
857
858  // PPP
859  // ---
860  _pppWidgets._dataSource->setMaximumWidth(20*ww);
861  _pppWidgets._corrMount->setMaximumWidth(20*ww);
862
863  _pppWidgets._corrFile->setMaximumWidth(35*ww);
864  _pppWidgets._crdFile->setMaximumWidth(35*ww);
865  _pppWidgets._logPath->setMaximumWidth(35*ww);
866  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
867  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
868  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
869  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
870
871  QGridLayout* pppLayout1 = new QGridLayout();
872  int ir = 0;
873  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
874  ++ir;
875  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
876  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
877  pppLayout1->addWidget(new QLabel("   RINEX Obs file"),     ir, 3);
878  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 4, 1, 3);
879  ++ir;
880  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
881  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
882  pppLayout1->addWidget(new QLabel("   RINEX Nav file"),     ir, 3);
883  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 4, 1, 3);
884  ++ir;
885  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 0);
886  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 1);
887  pppLayout1->addWidget(new QLabel("   ANTEX file"),         ir, 3);
888  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 4, 1, 3);
889  ++ir;
890  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
891  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
892  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 3);
893  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 4, 1, 3);
894  ++ir;
895  pppLayout1->addWidget(new QLabel("Logfile directory"),     ir, 0);
896  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 1);
897  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 3);
898  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 4, 1, 3);
899  ++ir;
900  pppLayout1->addWidget(new QLabel("SNX TRO directory"),     ir, 0);
901  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 1);
902  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 3);
903  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 4);
904  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 5);
905  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 6, Qt::AlignRight);
906  ++ir;
907  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 3);
908  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 4);
909  pppLayout1->addWidget(new QLabel("   SNX TRO solution")    ,ir, 5);
910  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 6, Qt::AlignRight);
911  pppLayout1->setRowStretch(ir, 999);
912
913  pppGroup1->setLayout(pppLayout1);
914
915  QVBoxLayout* pppLayout2 = new QVBoxLayout();
916  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
917  pppLayout2->addWidget(_pppWidgets._staTable, 99);
918  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
919  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
920  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
921  pppLayout2sub->addStretch(99);
922
923  pppLayout2->addLayout(pppLayout2sub);
924
925  pppGroup2->setLayout(pppLayout2);
926
927  QGridLayout* pppLayout3 = new QGridLayout();
928  ir = 0;
929  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
930  ++ir;
931  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
932  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
933  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
934  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
935  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
936  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
937  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
938  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
939  ++ir;
940  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
941  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
942  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
943  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
944  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
945  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
946  ++ir;
947  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
948  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
949  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
950  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
951  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
952  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
953  ++ir;
954  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
955  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
956  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
957  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
958  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
959  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
960  ++ir;
961  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
962  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
963  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
964  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
965  ++ir;
966  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
967  pppLayout3->setColumnStretch(8, 999);
968  ++ir;
969  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
970  pppLayout3->setRowStretch(ir, 999);
971
972  pppGroup3->setLayout(pppLayout3);
973
974  // ------------------------
975  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
976  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
977  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
978
979  QGridLayout* pppLayout4 = new QGridLayout();
980  ir = 0;
981  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
982  ++ir;
983  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
984  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
985  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
986  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
987  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
988  ++ir;
989  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
990  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
991  ++ir;
992  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
993  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
994  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
995  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
996  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
997  ++ir;
998  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
999  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
1000  ++ir;
1001  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
1002  pppLayout4->setRowStretch(ir, 999);
1003
1004  pppGroup4->setLayout(pppLayout4);
1005
1006  // Reqc Processing
1007  // ---------------
1008  _reqcActionComboBox = new QComboBox();
1009  _reqcActionComboBox->setEditable(false);
1010  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1011  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1012  if (ik != -1) {
1013    _reqcActionComboBox->setCurrentIndex(ik);
1014  }
1015  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1016          this, SLOT(slotBncTextChanged()));
1017
1018  QGridLayout* reqcLayout = new QGridLayout;
1019  _reqcActionComboBox->setMinimumWidth(15*ww);
1020  _reqcActionComboBox->setMaximumWidth(20*ww);
1021
1022  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1023  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1024
1025  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1026  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1027  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1028  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1029  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1030  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1031  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1032
1033  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1034          this, SLOT(slotBncTextChanged()));
1035
1036  _reqcLogSummaryOnly = new QCheckBox();
1037  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1038
1039  ir = 0;
1040  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1041  ++ir;
1042  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1043  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1044  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1045  _reqcEditOptionButton->setMinimumWidth(15*ww);
1046  _reqcEditOptionButton->setMaximumWidth(20*ww);
1047
1048  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1049  ++ir;
1050  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1051  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1052  _reqcObsFileChooser->setMaximumWidth(40*ww);
1053  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1054  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1055  _reqcNavFileChooser->setMaximumWidth(40*ww);
1056  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1057  ++ir;
1058  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1059  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1060  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1061  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1062  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1063  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1064  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1065  ++ir;
1066  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1067  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1068  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1069  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1070  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1071  ++ir;
1072  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1073  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1074  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1075  ++ir;
1076  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1077  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1078  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1079  ++ir;
1080  reqcLayout->setRowStretch(ir, 999);
1081
1082  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1083  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1084
1085  reqcgroup->setLayout(reqcLayout);
1086
1087  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1088          this, SLOT(slotReqcEditOption()));
1089
1090  QGridLayout* sp3CompLayout = new QGridLayout;
1091
1092  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1093  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1094  _sp3CompFileChooser->setMinimumWidth(15*ww);
1095  _sp3CompFileChooser->setMaximumWidth(40*ww);
1096
1097  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1098  _sp3CompExclude->setMinimumWidth(18*ww);
1099  _sp3CompExclude->setMaximumWidth(18*ww);
1100
1101  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1102  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1103  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1104
1105  ir = 0;
1106  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1107  ++ir;
1108  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1109  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1110  ++ir;
1111  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1112  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1113  ++ir;
1114  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1115  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1116  ++ir;
1117  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1118  ++ir;
1119  sp3CompLayout->setRowStretch(ir, 999);
1120
1121  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1122  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1123
1124  sp3CompGroup->setLayout(sp3CompLayout);
1125
1126  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1127          this, SLOT(slotBncTextChanged()));
1128
1129  // Combine Corrections
1130  // -------------------
1131  QGridLayout* cmbLayout = new QGridLayout;
1132
1133  populateCmbTable();
1134  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1135  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1136  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1137  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1138  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1139  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1140  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1141  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1142  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1143  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1144  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1145  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1146  cmbLayout->setRowStretch(7, 999);
1147
1148  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1149  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1150
1151  cmbgroup->setLayout(cmbLayout);
1152
1153  // Upload Layout (Clocks)
1154  // ----------------------
1155  QGridLayout* uploadHlpLayout = new QGridLayout();
1156
1157  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1158  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1159  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1160
1161  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1162  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1163  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1164  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1165  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1166  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1167  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1168  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1169  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1170  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1171  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1172  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1173  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1174
1175  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1176  populateUploadTable();
1177
1178  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1179  uploadLayout->addWidget(_uploadTable);
1180  uploadLayout->addLayout(uploadHlpLayout);
1181
1182  uploadgroup->setLayout(uploadLayout);
1183
1184  // Upload Layout (Ephemeris)
1185  // -------------------------
1186  QGridLayout* uploadLayoutEph = new QGridLayout;
1187
1188  uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1189  _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1190  _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1191  _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1192
1193  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1194  uploadLayoutEph->addWidget(new QLabel("Host"),                  1, 0);
1195  uploadLayoutEph->addWidget(_uploadEphHostLineEdit,              1, 1, 1, 3);
1196  uploadLayoutEph->addWidget(new QLabel("  Port"),                1, 4, Qt::AlignRight);
1197  uploadLayoutEph->addWidget(_uploadEphPortLineEdit,              1, 5, 1, 1);
1198  uploadLayoutEph->addWidget(new QLabel("Mountpoint           "), 2, 0);
1199  uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit,        2, 1);
1200  uploadLayoutEph->addWidget(new QLabel("          Password"),    2, 2, Qt::AlignRight);
1201  uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit,          2, 3);
1202  uploadLayoutEph->addWidget(new QLabel("Sampling"),              3, 0);
1203  uploadLayoutEph->addWidget(_uploadEphSampleSpinBox,             3, 1);
1204  uploadLayoutEph->addWidget(new QLabel("Uploaded"),              4, 0);
1205  uploadLayoutEph->addWidget(_uploadEphBytesCounter,              4, 1);
1206  uploadLayoutEph->setRowStretch(5, 999);
1207
1208  uploadEphgroup->setLayout(uploadLayoutEph);
1209
1210  connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1211          this, SLOT(slotBncTextChanged()));
1212
1213  // Main Layout
1214  // -----------
1215  QGridLayout* mLayout = new QGridLayout;
1216  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1217  mLayout->addWidget(_aogroup,            0,0);
1218  mLayout->addWidget(_mountPointsTable,   1,0);
1219  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1220  mLayout->addWidget(_loggroup,           2,0);
1221
1222  _canvas->setLayout(mLayout);
1223
1224  // WhatsThis, Network
1225  // ------------------
1226  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1227  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1228  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1229  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.</p>"));
1230
1231  // WhatsThis, General
1232  // ------------------
1233  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1234  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1235  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1236  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1237  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1238
1239  // WhatsThis, RINEX Observations
1240  // -----------------------------
1241  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1242  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1243  _rnxSamplComboBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. </p>"));
1244  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4/9-char ID forming the base name has to be written in upper cases. </p>"));
1245  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1246  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1247  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'I:ABCX' (System specific signal priorities for IRNSS) </li><li>'G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:128&DPX C:7&DPZ I:ABCX S:1&C S:5&IQX'. <i>[key: rnxV2Priority]</i></p>"));
1248  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1249
1250  // WhatsThis, RINEX Ephemeris
1251  // --------------------------
1252  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1253  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1254  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1255  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1256
1257  // WhatsThis, RINEX Editing & QC
1258  // -----------------------------
1259  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1260  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1261  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1262  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1263  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1264  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1265  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1266  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1267  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1268  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default.</p>"));
1269
1270  // WhatsThis, SP3 Comparison
1271  // -------------------------
1272  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1273  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1274  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1275
1276  // WhatsThis, Broadcast Corrections
1277  // --------------------------------
1278  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1279  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1280  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1281
1282  // WhatsThis, Feed Engine
1283  // ----------------------
1284  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1285  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1286  _outSamplComboBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds. </p>"));
1287  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1288  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1289  _outLockTimeCheckBox->setWhatsThis(tr("<p>Print the lock time in seconds in the feed engine output.</p>"));
1290
1291  // WhatsThis, Serial Output
1292  // ------------------------
1293  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1294  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1295  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1296  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1297  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1298  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1299  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1300  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1301  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1302  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1303  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1304
1305  // WhatsThis, Outages
1306  // ------------------
1307  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1308  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1309  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1310  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1311
1312  // WhatsThis, Miscellaneous
1313  // ------------------------
1314  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1315  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1316  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1317  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1318
1319  // WhatsThis, PPP (1)
1320  // ------------------
1321  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1322  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1323  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1324  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1325  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1326  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1327  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1328  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1329  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1330  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1331  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1332  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1333  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p>"));
1334  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files.</p>"));
1335  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC.</p>"));
1336
1337  // WhatsThis, PPP (3)
1338  // ------------------
1339  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1340  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1341  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1342  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1343  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1344  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1345  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1346  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1347  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1348  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1349  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1350  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.</p>"));
1351
1352  // WhatsThis, Combine Corrections
1353  // ------------------------------
1354  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1355  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1356  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1357  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1358  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1359  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1360  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1361
1362  // WhatsThis, Upload Corrections
1363  // -----------------------------
1364  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1365  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1366  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the Upload Corrections' table.</p>"));
1367  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1368  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1369  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1370  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1371  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1372  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1373
1374  // WhatsThis, Upload Ephemeris
1375  // ---------------------------
1376  _uploadEphHostLineEdit->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the stream.</p><p>An empty option field means that you don't want to upload Broadcast Ephemeris.</p>"));
1377  _uploadEphPortLineEdit->setWhatsThis(tr("<p>Specify the IP port of the Ntrip Broadcaster to upload the Broadcast Ephemeris stream. Default is port 80.</p>"));
1378  _uploadEphMountpointLineEdit->setWhatsThis(tr("<p>Specify a mountpoint for uploading the Broadcast Ephemeris stream.</p>"));
1379  _uploadEphPasswordLineEdit->setWhatsThis(tr("<p>Specify the stream upload password protecting the mounpoint on the Ntrip Broadcaster.</p>"));
1380  _uploadEphSampleSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1381  _uploadEphBytesCounter->setWhatsThis(tr("<p>BNC shows the amount of data uploaded via this stream.</p>"));
1382// weber
1383
1384  // WhatsThis, Streams Canvas
1385  // -------------------------
1386  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1387  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1388  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1389  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1390  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1391  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1392
1393  // WhatsThis, Log Canvas
1394  // ---------------------
1395  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1396  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1397  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1398  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1399
1400
1401  // Enable/Disable all Widgets
1402  // --------------------------
1403  slotBncTextChanged();
1404  enableStartStop();
1405
1406  // Auto start
1407  // ----------
1408  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1409    slotStart();
1410  }
1411}
1412
1413// Destructor
1414////////////////////////////////////////////////////////////////////////////
1415bncWindow::~bncWindow() {
1416  if (_caster) {
1417    delete _caster; BNC_CORE->setCaster(0);
1418  }
1419  if (_casterEph) {
1420    delete _casterEph;
1421  }
1422  delete _bncFigureLate;
1423  delete _bncFigurePPP;
1424  delete _actHelp;
1425  delete _actAbout;
1426  delete _actFlowchart;
1427  delete _actFontSel;
1428  delete _actSaveOpt;
1429  delete _actQuit;
1430  delete _actAddMountPoints;
1431  delete _actDeleteMountPoints;
1432  delete _actMapMountPoints;
1433  delete _actStart;
1434  delete _actStop;
1435  delete _actwhatsthis;
1436  delete _proxyHostLineEdit;
1437  delete _proxyPortLineEdit;
1438  delete _sslCaCertPathLineEdit;
1439  delete _sslIgnoreErrorsCheckBox;
1440  delete _logFileLineEdit;
1441  delete _rawOutFileLineEdit;
1442  delete _rnxAppendCheckBox;
1443  delete _onTheFlyComboBox;
1444  delete _autoStartCheckBox;
1445  delete _rnxPathLineEdit;
1446  delete _rnxIntrComboBox;
1447  delete _rnxSamplComboBox;
1448  delete _rnxFileCheckBox;
1449  delete _rnxSkelLineEdit;
1450  delete _rnxScrpLineEdit;
1451  delete _rnxV3CheckBox;
1452  delete _rnxV2Priority;
1453  delete _ephPathLineEdit;
1454  delete _ephIntrComboBox;
1455  delete _ephOutPortLineEdit;
1456  delete _ephV3CheckBox;
1457  delete _corrPathLineEdit;
1458  delete _corrIntrComboBox;
1459  delete _corrPortLineEdit;
1460  delete _outPortLineEdit;
1461  delete _outWaitSpinBox;
1462  delete _outSamplComboBox;
1463  delete _outFileLineEdit;
1464  delete _outUPortLineEdit;
1465  delete _outLockTimeCheckBox;
1466  delete _serialMountPointLineEdit;
1467  delete _serialPortNameLineEdit;
1468  delete _serialBaudRateComboBox;
1469  delete _serialFlowControlComboBox;
1470  delete _serialDataBitsComboBox;
1471  delete _serialParityComboBox;
1472  delete _serialStopBitsComboBox;
1473  delete _serialAutoNMEAComboBox;
1474  delete _serialFileNMEALineEdit;
1475  delete _serialHeightNMEALineEdit;
1476  delete _serialManualNMEASamplingSpinBox;
1477  delete _adviseObsRateComboBox;
1478  delete _adviseFailSpinBox;
1479  delete _adviseRecoSpinBox;
1480  delete _adviseScriptLineEdit;
1481  delete _miscMountLineEdit;
1482  delete _miscPortLineEdit;
1483  delete _miscIntrComboBox;
1484  delete _miscScanRTCMCheckBox;
1485  _mountPointsTable->deleteLater();
1486  delete _log;
1487  _cmbTable->deleteLater();
1488  delete _cmbMaxresLineEdit;
1489  delete _cmbUseGlonass;
1490  delete _cmbSamplSpinBox;
1491  delete _cmbMethodComboBox;
1492  _uploadTable->deleteLater();
1493  delete _uploadIntrComboBox;
1494  delete _uploadAntexFile;
1495  delete _uploadSamplRtcmEphCorrSpinBox;
1496  delete _uploadSamplSp3SpinBox;
1497  delete _uploadSamplClkRnxSpinBox;
1498  delete _uploadEphHostLineEdit;
1499  delete _uploadEphPortLineEdit;
1500  delete _uploadEphPasswordLineEdit;
1501  delete _uploadEphMountpointLineEdit;
1502  delete _uploadEphSampleSpinBox;
1503  delete _uploadEphBytesCounter;
1504  delete _loggroup;
1505  delete _reqcActionComboBox;
1506  delete _reqcObsFileChooser;
1507  delete _reqcNavFileChooser;
1508  delete _reqcOutObsLineEdit;
1509  delete _reqcOutNavLineEdit;
1510  delete _reqcOutLogLineEdit;
1511  delete _reqcPlotDirLineEdit;
1512  delete _reqcSkyPlotSignals;
1513  delete _reqcLogSummaryOnly;
1514  delete _reqcEditOptionButton;
1515  delete _sp3CompFileChooser;
1516  delete _sp3CompExclude;
1517  delete _sp3CompLogLineEdit;
1518  //delete _canvas;
1519}
1520
1521//
1522////////////////////////////////////////////////////////////////////////////
1523void bncWindow::populateMountPointsTable() {
1524
1525  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1526    _mountPointsTable->removeRow(iRow);
1527  }
1528
1529  bncSettings settings;
1530
1531  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1532  int iRow = 0;
1533  while (it.hasNext()) {
1534    QStringList hlp = it.next().split(" ");
1535    if (hlp.size() < 7) continue;
1536    _mountPointsTable->insertRow(iRow);
1537
1538    QUrl    url(hlp[0]);
1539
1540    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1541    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1542    QString nmea(hlp[5]);
1543    if (hlp[6] == "S") {
1544      fullPath = hlp[0].replace(0,2,"");
1545    }
1546    QString ntripVersion = "2";
1547    if (hlp.size() >= 7) {
1548      ntripVersion = (hlp[6]);
1549    }
1550
1551    QTableWidgetItem* it;
1552    it = new QTableWidgetItem(url.userInfo());
1553    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1554    _mountPointsTable->setItem(iRow, 0, it);
1555
1556    it = new QTableWidgetItem(fullPath);
1557    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1558    _mountPointsTable->setItem(iRow, 1, it);
1559
1560    it = new QTableWidgetItem(format);
1561    _mountPointsTable->setItem(iRow, 2, it);
1562
1563    it = new QTableWidgetItem(country);
1564    _mountPointsTable->setItem(iRow, 3, it);
1565
1566    if      (nmea == "yes") {
1567      it = new QTableWidgetItem(latitude);
1568      _mountPointsTable->setItem(iRow, 4, it);
1569      it = new QTableWidgetItem(longitude);
1570      _mountPointsTable->setItem(iRow, 5, it);
1571    } else {
1572      it = new QTableWidgetItem(latitude);
1573      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1574      _mountPointsTable->setItem(iRow, 4, it);
1575
1576      it = new QTableWidgetItem(longitude);
1577      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1578      _mountPointsTable->setItem(iRow, 5, it);
1579    }
1580
1581    it = new QTableWidgetItem(nmea);
1582    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1583    _mountPointsTable->setItem(iRow, 6, it);
1584
1585    it = new QTableWidgetItem(ntripVersion);
1586    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1587    _mountPointsTable->setItem(iRow, 7, it);
1588
1589    bncTableItem* bncIt = new bncTableItem();
1590    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1591    _mountPointsTable->setItem(iRow, 8, bncIt);
1592
1593    iRow++;
1594  }
1595
1596  _mountPointsTable->sortItems(1);
1597
1598  enableStartStop();
1599}
1600
1601// Retrieve Table
1602////////////////////////////////////////////////////////////////////////////
1603void bncWindow::slotAddMountPoints() {
1604
1605  bncSettings settings;
1606  QString proxyHost = settings.value("proxyHost").toString();
1607  int     proxyPort = settings.value("proxyPort").toInt();
1608  if (proxyHost != _proxyHostLineEdit->text()         ||
1609      proxyPort != _proxyPortLineEdit->text().toInt()) {
1610    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1611                                     "changed. Use the new ones?",
1612                                     QMessageBox::Yes, QMessageBox::No,
1613                                     QMessageBox::NoButton);
1614    if      (iRet == QMessageBox::Yes) {
1615      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1616      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1617    }
1618  }
1619
1620  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1621  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1622
1623  QMessageBox msgBox;
1624  msgBox.setIcon(QMessageBox::Question);
1625  msgBox.setWindowTitle("Add Stream");
1626  msgBox.setText("Add stream(s) coming from:");
1627
1628  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1629  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1630  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1631  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1632  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1633
1634  msgBox.exec();
1635
1636  if (msgBox.clickedButton() == buttonNtrip) {
1637    bncTableDlg* dlg = new bncTableDlg(this);
1638    dlg->move(this->pos().x()+50, this->pos().y()+50);
1639    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1640          this, SLOT(slotNewMountPoints(QStringList*)));
1641    dlg->exec();
1642    delete dlg;
1643  } else if (msgBox.clickedButton() == buttonIP) {
1644    bncIpPort* ipp = new bncIpPort(this);
1645    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1646          this, SLOT(slotNewMountPoints(QStringList*)));
1647    ipp->exec();
1648    delete ipp;
1649  } else if (msgBox.clickedButton() == buttonUDP) {
1650    bncUdpPort* udp = new bncUdpPort(this);
1651    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1652          this, SLOT(slotNewMountPoints(QStringList*)));
1653    udp->exec();
1654    delete udp;
1655  } else if (msgBox.clickedButton() == buttonSerial) {
1656    bncSerialPort* sep = new bncSerialPort(this);
1657    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1658          this, SLOT(slotNewMountPoints(QStringList*)));
1659    sep->exec();
1660    delete sep;
1661  } else if (msgBox.clickedButton() == buttonCancel) {
1662    // Cancel
1663  }
1664
1665  enableStartStop();
1666}
1667
1668// Delete Selected Mount Points
1669////////////////////////////////////////////////////////////////////////////
1670void bncWindow::slotDeleteMountPoints() {
1671
1672  int nRows = _mountPointsTable->rowCount();
1673  bool flg[nRows];
1674  for (int iRow = 0; iRow < nRows; iRow++) {
1675    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1676      flg[iRow] = true;
1677    }
1678    else {
1679      flg[iRow] = false;
1680    }
1681  }
1682  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1683    if (flg[iRow]) {
1684      _mountPointsTable->removeRow(iRow);
1685    }
1686  }
1687  _actDeleteMountPoints->setEnabled(false);
1688
1689  enableStartStop();
1690}
1691
1692// New Mount Points Selected
1693////////////////////////////////////////////////////////////////////////////
1694void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1695  int iRow = 0;
1696  QListIterator<QString> it(*mountPoints);
1697  while (it.hasNext()) {
1698    QStringList hlp = it.next().split(" ");
1699    QUrl    url(hlp[0]);
1700    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1701    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1702    QString nmea(hlp[5]);
1703    if (hlp[6] == "S") {
1704      fullPath = hlp[0].replace(0,2,"");
1705    }
1706    QString ntripVersion = "2";
1707    if (hlp.size() >= 7) {
1708      ntripVersion = (hlp[6]);
1709    }
1710
1711    _mountPointsTable->insertRow(iRow);
1712
1713    QTableWidgetItem* it;
1714    it = new QTableWidgetItem(url.userInfo());
1715    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1716    _mountPointsTable->setItem(iRow, 0, it);
1717
1718    it = new QTableWidgetItem(fullPath);
1719    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1720    _mountPointsTable->setItem(iRow, 1, it);
1721
1722    it = new QTableWidgetItem(format);
1723    _mountPointsTable->setItem(iRow, 2, it);
1724
1725    it = new QTableWidgetItem(country);
1726    _mountPointsTable->setItem(iRow, 3, it);
1727
1728    if      (nmea == "yes") {
1729    it = new QTableWidgetItem(latitude);
1730    _mountPointsTable->setItem(iRow, 4, it);
1731    it = new QTableWidgetItem(longitude);
1732    _mountPointsTable->setItem(iRow, 5, it);
1733    } else {
1734    it = new QTableWidgetItem(latitude);
1735    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1736    _mountPointsTable->setItem(iRow, 4, it);
1737    it = new QTableWidgetItem(longitude);
1738    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1739    _mountPointsTable->setItem(iRow, 5, it);
1740    }
1741
1742    it = new QTableWidgetItem(nmea);
1743    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1744    _mountPointsTable->setItem(iRow, 6, it);
1745
1746    it = new QTableWidgetItem(ntripVersion);
1747    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1748    _mountPointsTable->setItem(iRow, 7, it);
1749
1750    bncTableItem* bncIt = new bncTableItem();
1751    _mountPointsTable->setItem(iRow, 8, bncIt);
1752
1753    iRow++;
1754  }
1755  _mountPointsTable->hideColumn(0);
1756  _mountPointsTable->hideColumn(3);
1757  _mountPointsTable->sortItems(1);
1758  delete mountPoints;
1759
1760  enableStartStop();
1761}
1762
1763// Save Options (serialize)
1764////////////////////////////////////////////////////////////////////////////
1765void bncWindow::slotSaveOptions() {
1766  saveOptions();
1767  bncSettings settings;
1768  settings.sync();
1769}
1770
1771// Save Options (memory only)
1772////////////////////////////////////////////////////////////////////////////
1773void bncWindow::saveOptions() {
1774
1775  QStringList mountPoints;
1776  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1777
1778    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1779      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1780                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1781
1782      mountPoints.append(url.toString() + " " +
1783                         _mountPointsTable->item(iRow, 2)->text()
1784                 + " " + _mountPointsTable->item(iRow, 3)->text()
1785                 + " " + _mountPointsTable->item(iRow, 4)->text()
1786                 + " " + _mountPointsTable->item(iRow, 5)->text()
1787                 + " " + _mountPointsTable->item(iRow, 6)->text()
1788                 + " " + _mountPointsTable->item(iRow, 7)->text());
1789    } else {
1790      mountPoints.append(
1791                  "//" + _mountPointsTable->item(iRow, 1)->text()
1792                 + " " + _mountPointsTable->item(iRow, 2)->text()
1793                 + " " + _mountPointsTable->item(iRow, 3)->text()
1794                 + " " + _mountPointsTable->item(iRow, 4)->text()
1795                 + " " + _mountPointsTable->item(iRow, 5)->text()
1796                 + " " + _mountPointsTable->item(iRow, 6)->text()
1797                 + " " + _mountPointsTable->item(iRow, 7)->text());
1798    }
1799  }
1800
1801  QStringList cmbStreams;
1802  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1803    QString hlp;
1804    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1805      if (_cmbTable->item(iRow, iCol)) {
1806        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1807      }
1808    }
1809    if (!hlp.isEmpty()) {
1810      cmbStreams << hlp;
1811    }
1812  }
1813
1814  QStringList uploadMountpointsOut;
1815  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1816    QString hlp;
1817    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1818      if (_uploadTable->cellWidget(iRow, iCol) &&
1819          (iCol == 3 || iCol == 4 || iCol == 5 || iCol == 6)) {
1820        if      (iCol == 3) {
1821          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1822          hlp += passwd->text() + ",";
1823        }
1824        else if (iCol == 4) {
1825          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1826          hlp += system->currentText() + ",";
1827        }
1828        else if (iCol == 5) {
1829          QComboBox* format = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1830          hlp += format->currentText() + ",";
1831        }
1832        else if (iCol == 6) {
1833          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1834          QString state; state.setNum(com->checkState());
1835          hlp +=  state + ",";
1836        }
1837      }
1838      else if (_uploadTable->item(iRow, iCol)) {
1839        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1840      }
1841    }
1842    if (!hlp.isEmpty()) {
1843      uploadMountpointsOut << hlp;
1844    }
1845  }
1846
1847  bncSettings settings;
1848
1849  settings.setValue("startTab",    _aogroup->currentIndex());
1850  settings.setValue("statusTab",   _loggroup->currentIndex());
1851  settings.setValue("mountPoints", mountPoints);
1852// Network
1853  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1854  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1855  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1856  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1857// General
1858  settings.setValue("logFile",     _logFileLineEdit->text());
1859  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1860  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1861  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1862  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1863// RINEX Observations
1864  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1865  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1866  settings.setValue("rnxSampl",     _rnxSamplComboBox->currentText());
1867  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1868  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1869  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1870  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1871   settings.setValue("rnxV3",        _rnxV3CheckBox->checkState());
1872// RINEX Ephemeris
1873  settings.setValue("ephPath",       _ephPathLineEdit->text());
1874  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1875  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1876  settings.setValue("ephV3",         _ephV3CheckBox->checkState());
1877// Broadcast Corrections
1878  settings.setValue("corrPath",    _corrPathLineEdit->text());
1879  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1880  settings.setValue("corrPort",    _corrPortLineEdit->text());
1881// Feed Engine
1882  settings.setValue("outPort",     _outPortLineEdit->text());
1883  settings.setValue("outWait",     _outWaitSpinBox->value());
1884  settings.setValue("outSampl",    _outSamplComboBox->currentText());
1885  settings.setValue("outFile",     _outFileLineEdit->text());
1886  settings.setValue("outUPort",    _outUPortLineEdit->text());
1887  settings.setValue("outLockTime",_outLockTimeCheckBox->checkState());
1888// Serial Output
1889  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1890  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1891  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1892  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1893  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1894  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1895  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1896  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1897  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1898  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1899  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1900// Outages
1901  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1902  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1903  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1904  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1905// Miscellaneous
1906  settings.setValue("miscMount",   _miscMountLineEdit->text());
1907  settings.setValue("miscPort",    _miscPortLineEdit->text());
1908  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1909  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1910// Reqc
1911  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1912  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1913  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1914  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1915  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1916  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1917  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1918  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1919  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1920// SP3 Comparison
1921  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
1922  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
1923  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1924// Combine Corrections
1925  if (!cmbStreams.isEmpty()) {
1926    settings.setValue("cmbStreams", cmbStreams);
1927  }
1928  else {
1929    settings.setValue("cmbStreams", "");
1930  }
1931  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
1932  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
1933  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
1934  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1935// Upload Corrections
1936  if (!uploadMountpointsOut.isEmpty()) {
1937    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1938  }
1939  else {
1940    settings.setValue("uploadMountpointsOut", "");
1941  }
1942  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
1943  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1944  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
1945  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
1946  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
1947// Upload Ephemeris
1948  settings.setValue("uploadEphHost",      _uploadEphHostLineEdit->text());
1949  settings.setValue("uploadEphPort",      _uploadEphPortLineEdit->text());
1950  settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1951  settings.setValue("uploadEphPassword",  _uploadEphPasswordLineEdit->text());
1952  settings.setValue("uploadEphSample",    _uploadEphSampleSpinBox->value());
1953
1954  if (_caster) {
1955    _caster->readMountPoints();
1956  }
1957
1958  _pppWidgets.saveOptions();
1959}
1960
1961// All get slots terminated
1962////////////////////////////////////////////////////////////////////////////
1963void bncWindow::slotGetThreadsFinished() {
1964  BNC_CORE->slotMessage("All Get Threads Terminated", true);
1965  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
1966  delete _casterEph; _casterEph = 0;
1967  _runningRealTime = false;
1968}
1969
1970// Start It!
1971////////////////////////////////////////////////////////////////////////////
1972void bncWindow::slotStart() {
1973  saveOptions();
1974  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1975    _runningPPP = true;
1976    enableStartStop();
1977    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1978    BNC_CORE->startPPP();
1979    _bncFigurePPP->reset();
1980  }
1981  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1982    if (_reqcActionComboBox->currentText() == "Analyze") {
1983      _runningQC = true;
1984      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1985      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1986      reqcAnalyze->start();
1987    }
1988    else {
1989      _runningEdit = true;
1990      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1991      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1992      reqcEdit->start();
1993    }
1994    enableStartStop();
1995  }
1996  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
1997    _runningSp3Comp = true;
1998    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
1999    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2000    sp3Comp->start();
2001    enableStartStop();
2002  }
2003  else {
2004    startRealTime();
2005    BNC_CORE->startPPP();
2006  }
2007}
2008
2009// Start Real-Time (Retrieve Data etc.)
2010////////////////////////////////////////////////////////////////////////////
2011void bncWindow::startRealTime() {
2012
2013  _runningRealTime = true;
2014
2015  _bncFigurePPP->reset();
2016
2017  _actDeleteMountPoints->setEnabled(false);
2018
2019  enableStartStop();
2020
2021  _caster = new bncCaster();
2022
2023  BNC_CORE->setCaster(_caster);
2024  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2025  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2026  BNC_CORE->initCombination();
2027
2028  connect(_caster, SIGNAL(getThreadsFinished()),
2029          this, SLOT(slotGetThreadsFinished()));
2030
2031  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2032           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2033
2034  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION" ("BNC_OS") ==========", true);
2035
2036  bncSettings settings;
2037
2038  // Active panels
2039  // -------------
2040  if (!_rnxPathLineEdit->text().isEmpty())
2041      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2042  if (!_ephPathLineEdit->text().isEmpty())
2043      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2044  if (!_corrPathLineEdit->text().isEmpty())
2045      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2046  if (!_outPortLineEdit->text().isEmpty())
2047      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2048  if (!_serialMountPointLineEdit->text().isEmpty())
2049      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2050  if (!_adviseObsRateComboBox->currentText().isEmpty())
2051      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2052  if (!_miscMountLineEdit->text().isEmpty())
2053      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2054  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2055      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2056  if (_cmbTable->rowCount() > 0)
2057      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2058  if (_uploadTable->rowCount() > 0)
2059      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2060  if (!_uploadEphHostLineEdit->text().isEmpty())
2061      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2062
2063  QDir rnxdir(settings.value("rnxPath").toString());
2064  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2065
2066  QString rnx_file = settings.value("rnxScript").toString();
2067  if ( !rnx_file.isEmpty() ) {
2068    QFile rnxfile(settings.value("rnxScript").toString());
2069    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2070  }
2071
2072  QDir ephdir(settings.value("ephPath").toString());
2073  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2074
2075  QDir corrdir(settings.value("corrPath").toString());
2076  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2077
2078  QString advise_file = settings.value("adviseScript").toString();
2079  if ( !advise_file.isEmpty() ) {
2080    QFile advisefile(settings.value("adviseScript").toString());
2081    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2082  }
2083
2084  _caster->readMountPoints();
2085
2086  _casterEph = new bncEphUploadCaster();
2087  connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2088          _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2089}
2090
2091// Retrieve Data
2092////////////////////////////////////////////////////////////////////////////
2093void bncWindow::slotStop() {
2094  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2095                                   QMessageBox::Yes, QMessageBox::No,
2096                                   QMessageBox::NoButton);
2097  if (iRet == QMessageBox::Yes) {
2098    BNC_CORE->stopPPP();
2099    BNC_CORE->stopCombination();
2100    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2101    delete _casterEph; _casterEph = 0;
2102    _runningRealTime = false;
2103    _runningPPP      = false;
2104    enableStartStop();
2105  }
2106}
2107
2108// Close Application gracefully
2109////////////////////////////////////////////////////////////////////////////
2110void bncWindow::closeEvent(QCloseEvent* event) {
2111
2112  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2113                                   QMessageBox::Yes, QMessageBox::No,
2114                                   QMessageBox::Cancel);
2115
2116  if      (iRet == QMessageBox::Cancel) {
2117    event->ignore();
2118    return;
2119  }
2120  else if (iRet == QMessageBox::Yes) {
2121    slotSaveOptions();
2122  }
2123
2124  BNC_CORE->stopPPP();
2125
2126  QMainWindow::closeEvent(event);
2127}
2128
2129// User changed the selection of mountPoints
2130////////////////////////////////////////////////////////////////////////////
2131void bncWindow::slotSelectionChanged() {
2132  if (_mountPointsTable->selectedItems().isEmpty()) {
2133    _actDeleteMountPoints->setEnabled(false);
2134  }
2135  else {
2136    _actDeleteMountPoints->setEnabled(true);
2137  }
2138}
2139
2140// Display Program Messages
2141////////////////////////////////////////////////////////////////////////////
2142void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2143  if (showOnScreen ) {
2144    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2145  }
2146}
2147
2148// About Message
2149////////////////////////////////////////////////////////////////////////////
2150void bncWindow::slotAbout() {
2151 new bncAboutDlg(0);
2152}
2153
2154//Flowchart
2155////////////////////////////////////////////////////////////////////////////
2156void bncWindow::slotFlowchart() {
2157 new bncFlowchartDlg(0);
2158}
2159
2160// Help Window
2161////////////////////////////////////////////////////////////////////////////
2162void bncWindow::slotHelp() {
2163  QUrl url;
2164  url.setPath(":bnchelp.html");
2165  new bncHlpDlg(0, url);
2166}
2167
2168// Select Fonts
2169////////////////////////////////////////////////////////////////////////////
2170void bncWindow::slotFontSel() {
2171  bool ok;
2172  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2173  if (ok) {
2174    bncSettings settings;
2175    settings.setValue("font", newFont.toString());
2176    QApplication::setFont(newFont);
2177    int ww = QFontMetrics(newFont).width('w');
2178    setMinimumSize(60*ww, 80*ww);
2179    resize(60*ww, 80*ww);
2180  }
2181}
2182
2183// Whats This Help
2184void bncWindow::slotWhatsThis() {
2185  QWhatsThis::enterWhatsThisMode();
2186}
2187
2188//
2189////////////////////////////////////////////////////////////////////////////
2190void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2191  _threads = threads;
2192
2193  _bncFigure->updateMountPoints();
2194  _bncFigureLate->updateMountPoints();
2195
2196  populateMountPointsTable();
2197  bncSettings settings;
2198  _outSamplComboBox->findText(settings.value("outSampl").toString());
2199  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2200  QListIterator<bncGetThread*> iTh(threads);
2201  while (iTh.hasNext()) {
2202    bncGetThread* thread = iTh.next();
2203    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2204      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2205                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2206      if (url                                      == thread->mountPoint() &&
2207          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2208          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2209        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2210        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2211                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2212        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2213                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2214        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2215                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2216        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2217                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2218        break;
2219      }
2220    }
2221  }
2222}
2223
2224//
2225////////////////////////////////////////////////////////////////////////////
2226void bncWindow::CreateMenu() {
2227  // Create Menus
2228  // ------------
2229  _menuFile = menuBar()->addMenu(tr("&File"));
2230  _menuFile->addAction(_actFontSel);
2231  _menuFile->addSeparator();
2232  _menuFile->addAction(_actSaveOpt);
2233  _menuFile->addSeparator();
2234  _menuFile->addAction(_actQuit);
2235
2236  _menuHlp = menuBar()->addMenu(tr("&Help"));
2237  _menuHlp->addAction(_actHelp);
2238  _menuHlp->addAction(_actFlowchart);
2239  _menuHlp->addAction(_actAbout);
2240}
2241
2242// Toolbar
2243////////////////////////////////////////////////////////////////////////////
2244void bncWindow::AddToolbar() {
2245  QToolBar* toolBar = new QToolBar;
2246  addToolBar(Qt::BottomToolBarArea, toolBar);
2247  toolBar->setMovable(false);
2248  toolBar->addAction(_actAddMountPoints);
2249  toolBar->addAction(_actDeleteMountPoints);
2250  toolBar->addAction(_actMapMountPoints);
2251  toolBar->addAction(_actStart);
2252  toolBar->addAction(_actStop);
2253  toolBar->addWidget(new QLabel("                                           "));
2254  toolBar->addAction(_actwhatsthis);
2255}
2256
2257// About
2258////////////////////////////////////////////////////////////////////////////
2259bncAboutDlg::bncAboutDlg(QWidget* parent) :
2260   QDialog(parent) {
2261
2262  QTextBrowser* tb = new QTextBrowser;
2263  QUrl url; url.setPath(":bncabout.html");
2264  tb->setSource(url);
2265  tb->setReadOnly(true);
2266
2267  int ww = QFontMetrics(font()).width('w');
2268  QPushButton* _closeButton = new QPushButton("Close");
2269  _closeButton->setMaximumWidth(10*ww);
2270  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2271
2272  QGridLayout* dlgLayout = new QGridLayout();
2273  QLabel* img = new QLabel();
2274  img->setPixmap(QPixmap(":ntrip-logo.png"));
2275  dlgLayout->addWidget(img, 0,0);
2276  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2277  dlgLayout->addWidget(tb,1,0,1,2);
2278  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2279
2280  setLayout(dlgLayout);
2281  resize(60*ww, 60*ww);
2282  setWindowTitle("About BNC");
2283  show();
2284}
2285
2286//
2287////////////////////////////////////////////////////////////////////////////
2288bncAboutDlg::~bncAboutDlg() {
2289
2290};
2291
2292// Flowchart
2293////////////////////////////////////////////////////////////////////////////
2294bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2295   QDialog(parent) {
2296
2297  int ww = QFontMetrics(font()).width('w');
2298  QPushButton* _closeButton = new QPushButton("Close");
2299  _closeButton->setMaximumWidth(10*ww);
2300  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2301
2302  QGridLayout* dlgLayout = new QGridLayout();
2303  QLabel* img = new QLabel();
2304  img->setPixmap(QPixmap(":bncflowchart.png"));
2305  dlgLayout->addWidget(img, 0,0);
2306  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2307
2308  setLayout(dlgLayout);
2309  setWindowTitle("Flow Chart");
2310  show();
2311}
2312
2313//
2314////////////////////////////////////////////////////////////////////////////
2315bncFlowchartDlg::~bncFlowchartDlg() {
2316};
2317
2318// Enable/Disable Widget (and change its color)
2319////////////////////////////////////////////////////////////////////////////
2320void bncWindow::enableWidget(bool enable, QWidget* widget) {
2321
2322  const static QPalette paletteWhite(QColor(255, 255, 255));
2323  const static QPalette paletteGray(QColor(230, 230, 230));
2324
2325  widget->setEnabled(enable);
2326  if (enable) {
2327    widget->setPalette(paletteWhite);
2328  }
2329  else {
2330    widget->setPalette(paletteGray);
2331  }
2332}
2333
2334//  Bnc Text
2335////////////////////////////////////////////////////////////////////////////
2336void bncWindow::slotBncTextChanged(){
2337
2338  const static QPalette paletteWhite(QColor(255, 255, 255));
2339  const static QPalette paletteGray(QColor(230, 230, 230));
2340
2341  bool enable = true;
2342
2343  // Proxy
2344  //------
2345  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2346    enable = !_proxyHostLineEdit->text().isEmpty();
2347    enableWidget(enable, _proxyPortLineEdit);
2348  }
2349
2350  // RINEX Observations
2351  // ------------------
2352  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2353    enable = !_rnxPathLineEdit->text().isEmpty();
2354    enableWidget(enable, _rnxIntrComboBox);
2355    enableWidget(enable, _rnxSamplComboBox);
2356    enableWidget(enable, _rnxSkelLineEdit);
2357    enableWidget(enable, _rnxFileCheckBox);
2358    enableWidget(enable, _rnxScrpLineEdit);
2359    enableWidget(enable, _rnxV2Priority);
2360    enableWidget(enable, _rnxV3CheckBox);
2361
2362    bool enable1 = true;
2363    enable1 = _rnxV3CheckBox->isChecked();
2364    if (enable && enable1) {
2365    enableWidget(false, _rnxV2Priority);
2366    }
2367    if (enable && !enable1) {
2368    enableWidget(true, _rnxV2Priority);
2369    }
2370  }
2371
2372  // RINEX Observations, Signal Priority
2373  // -----------------------------------
2374  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2375    if (!_rnxPathLineEdit->text().isEmpty()) {
2376      enableWidget(enable, _rnxIntrComboBox);
2377      enable = !_rnxV3CheckBox->isChecked();
2378      enableWidget(enable, _rnxV2Priority);
2379    }
2380  }
2381
2382  // RINEX Ephemeris
2383  // ---------------
2384  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2385    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2386    enableWidget(enable, _ephIntrComboBox);
2387    enableWidget(enable, _ephV3CheckBox);
2388  }
2389
2390  // Broadcast Corrections
2391  // ---------------------
2392  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2393    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2394    enableWidget(enable, _corrIntrComboBox);
2395  }
2396
2397  // Feed Engine
2398  // -----------
2399  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2400    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2401    enableWidget(enable, _outWaitSpinBox);
2402    enableWidget(enable, _outSamplComboBox);
2403  }
2404
2405  // Serial Output
2406  // -------------
2407  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2408      sender() == _serialAutoNMEAComboBox) {
2409    enable = !_serialMountPointLineEdit->text().isEmpty();
2410    enableWidget(enable, _serialPortNameLineEdit);
2411    enableWidget(enable, _serialBaudRateComboBox);
2412    enableWidget(enable, _serialParityComboBox);
2413    enableWidget(enable, _serialDataBitsComboBox);
2414    enableWidget(enable, _serialStopBitsComboBox);
2415    enableWidget(enable, _serialFlowControlComboBox);
2416    enableWidget(enable, _serialAutoNMEAComboBox);
2417    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2418    enableWidget(enable2, _serialFileNMEALineEdit);
2419    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2420    enableWidget(enable3, _serialHeightNMEALineEdit);
2421    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2422  }
2423
2424  // Outages
2425  // -------
2426  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2427    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2428    enableWidget(enable, _adviseFailSpinBox);
2429    enableWidget(enable, _adviseRecoSpinBox);
2430    enableWidget(enable, _adviseScriptLineEdit);
2431  }
2432
2433  // Miscellaneous
2434  // -------------
2435  if (sender() == 0 || sender() == _miscMountLineEdit) {
2436    enable = !_miscMountLineEdit->text().isEmpty();
2437    enableWidget(enable, _miscIntrComboBox);
2438    enableWidget(enable, _miscScanRTCMCheckBox);
2439    enableWidget(enable, _miscPortLineEdit);
2440  }
2441
2442  // Enable/disable Broadcast Ephemerides
2443  // ------------------------------------
2444  if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2445    enable = !_uploadEphHostLineEdit->text().isEmpty();
2446    enableWidget(enable, _uploadEphPortLineEdit);
2447    enableWidget(enable, _uploadEphMountpointLineEdit);
2448    enableWidget(enable, _uploadEphPasswordLineEdit);
2449    enableWidget(enable, _uploadEphSampleSpinBox);
2450  }
2451
2452  // Combine Corrections
2453  // -------------------
2454  if (sender() == 0 || sender() == _cmbTable) {
2455    int iRow = _cmbTable->rowCount();
2456    if (iRow > 0) {
2457      enableWidget(true, _cmbMethodComboBox);
2458      enableWidget(true, _cmbMaxresLineEdit);
2459      enableWidget(true, _cmbSamplSpinBox);
2460      enableWidget(true, _cmbUseGlonass);
2461    }
2462    else {
2463      enableWidget(false, _cmbMethodComboBox);
2464      enableWidget(false, _cmbMaxresLineEdit);
2465      enableWidget(false, _cmbSamplSpinBox);
2466      enableWidget(false, _cmbUseGlonass);
2467    }
2468  }
2469
2470  // Upload(clk)
2471  // -----------
2472  int iRow = _uploadTable->rowCount();
2473  if (iRow > 0) {
2474    enableWidget(true, _uploadIntrComboBox);
2475    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2476    enableWidget(true, _uploadSamplClkRnxSpinBox);
2477    enableWidget(true, _uploadSamplSp3SpinBox);
2478    enableWidget(true, _uploadAntexFile);
2479  }
2480  else {
2481    enableWidget(false, _uploadIntrComboBox);
2482    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2483    enableWidget(false, _uploadSamplClkRnxSpinBox);
2484    enableWidget(false, _uploadSamplSp3SpinBox);
2485    enableWidget(false, _uploadAntexFile);
2486  }
2487
2488  // QC
2489  // --
2490  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2491    enable = !_reqcActionComboBox->currentText().isEmpty();
2492    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2493//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2494    enableWidget(enable,                            _reqcObsFileChooser);
2495    enableWidget(enable,                            _reqcNavFileChooser);
2496    enableWidget(enable,                            _reqcOutLogLineEdit);
2497    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2498    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2499    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2500    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2501    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2502//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2503    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2504  }
2505
2506  // SP3 File Comparison
2507  // -------------------
2508  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2509    enable = !_sp3CompFileChooser->fileName().isEmpty();
2510    enableWidget(enable, _sp3CompLogLineEdit);
2511    enableWidget(enable, _sp3CompExclude);
2512  }
2513
2514  enableStartStop();
2515}
2516
2517//
2518////////////////////////////////////////////////////////////////////////////
2519void bncWindow::slotAddCmbRow() {
2520  int iRow = _cmbTable->rowCount();
2521  _cmbTable->insertRow(iRow);
2522  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2523    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2524  }
2525}
2526
2527//
2528////////////////////////////////////////////////////////////////////////////
2529void bncWindow::slotDelCmbRow() {
2530
2531  const static QPalette paletteWhite(QColor(255, 255, 255));
2532  const static QPalette paletteGray(QColor(230, 230, 230));
2533
2534  int nRows = _cmbTable->rowCount();
2535  bool flg[nRows];
2536  for (int iRow = 0; iRow < nRows; iRow++) {
2537    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2538      flg[iRow] = true;
2539    }
2540    else {
2541      flg[iRow] = false;
2542    }
2543  }
2544  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2545    if (flg[iRow]) {
2546      _cmbTable->removeRow(iRow);
2547    }
2548  }
2549  nRows = _cmbTable->rowCount();
2550  if (nRows < 1) {
2551    enableWidget(false, _cmbMethodComboBox);
2552    enableWidget(false, _cmbMaxresLineEdit);
2553    enableWidget(false, _cmbSamplSpinBox);
2554    enableWidget(false, _cmbUseGlonass);
2555  }
2556}
2557
2558//
2559////////////////////////////////////////////////////////////////////////////
2560void bncWindow::populateCmbTable() {
2561
2562  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2563    _cmbTable->removeRow(iRow);
2564  }
2565
2566  bncSettings settings;
2567
2568  int iRow = -1;
2569  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2570  while (it.hasNext()) {
2571    QStringList hlp = it.next().split(" ");
2572    if (hlp.size() > 2) {
2573      ++iRow;
2574      _cmbTable->insertRow(iRow);
2575    }
2576    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2577      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2578    }
2579  }
2580}
2581
2582//
2583////////////////////////////////////////////////////////////////////////////
2584void bncWindow::slotAddUploadRow() {
2585  int iRow = _uploadTable->rowCount();
2586  _uploadTable->insertRow(iRow);
2587  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2588    if      (iCol == 3) {
2589      QLineEdit* passwd = new QLineEdit();
2590      passwd->setFrame(false);
2591      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2592      _uploadTable->setCellWidget(iRow, iCol, passwd);
2593    }
2594    else if (iCol == 4) {
2595      QComboBox* system = new QComboBox();
2596      system->setEditable(false);
2597      system->addItems(QString("IGS14,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2598      system->setFrame(false);
2599      _uploadTable->setCellWidget(iRow, iCol, system);
2600    }
2601    else if (iCol == 5) {
2602      QComboBox* format = new QComboBox();
2603      format->setEditable(false);
2604      format->addItems(QString("IGS-SSR,RTCM-SSR").split(","));
2605      format->setFrame(false);
2606      _uploadTable->setCellWidget(iRow, iCol, format);
2607    }
2608    else if (iCol == 6) {
2609      QCheckBox* com = new QCheckBox();
2610      _uploadTable->setCellWidget(iRow, iCol, com);
2611    }
2612    else if (iCol == 12) {
2613      bncTableItem* bncIt = new bncTableItem();
2614      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2615      _uploadTable->setItem(iRow, iCol, bncIt);
2616      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2617    }
2618    else {
2619      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2620    }
2621  }
2622}
2623
2624//
2625////////////////////////////////////////////////////////////////////////////
2626void bncWindow::slotDelUploadRow() {
2627  BNC_CORE->_uploadTableItems.clear();
2628  int nRows = _uploadTable->rowCount();
2629  bool flg[nRows];
2630  for (int iRow = 0; iRow < nRows; iRow++) {
2631    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2632      flg[iRow] = true;
2633    }
2634    else {
2635      flg[iRow] = false;
2636    }
2637  }
2638  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2639    if (flg[iRow]) {
2640      _uploadTable->removeRow(iRow);
2641    }
2642  }
2643  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2644    BNC_CORE->_uploadTableItems[iRow] =
2645                                (bncTableItem*) _uploadTable->item(iRow, 12);
2646  }
2647  nRows = _uploadTable->rowCount();
2648  if (nRows < 1) {
2649    enableWidget(false, _uploadIntrComboBox);
2650    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2651    enableWidget(false, _uploadSamplSp3SpinBox);
2652    enableWidget(false, _uploadSamplClkRnxSpinBox);
2653    enableWidget(false, _uploadAntexFile);
2654  }
2655}
2656
2657//
2658////////////////////////////////////////////////////////////////////////////
2659void bncWindow::populateUploadTable() {
2660  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2661    _uploadTable->removeRow(iRow);
2662  }
2663
2664  bncSettings settings;
2665
2666  int iRow = -1;
2667  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2668  while (it.hasNext()) {
2669    QStringList hlp = it.next().split(",");
2670    if (hlp.size() > 6) {
2671      ++iRow;
2672      _uploadTable->insertRow(iRow);
2673    }
2674    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2675      if      (iCol == 3) {
2676        QLineEdit* passwd = new QLineEdit();
2677        passwd->setFrame(false);
2678        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2679        passwd->setText(hlp[iCol]);
2680        _uploadTable->setCellWidget(iRow, iCol, passwd);
2681      }
2682      else if (iCol == 4) {
2683        QComboBox* system = new QComboBox();
2684        system->setEditable(false);
2685        system->addItems(QString("IGS14,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2686        system->setFrame(false);
2687        system->setCurrentIndex(system->findText(hlp[iCol]));
2688        _uploadTable->setCellWidget(iRow, iCol, system);
2689      }
2690      else if (iCol == 5) {
2691        QComboBox* format = new QComboBox();
2692        format->setEditable(false);
2693        format->addItems(QString("IGS-SSR,RTCM-SSR").split(","));
2694        format->setFrame(false);
2695        format->setCurrentIndex(format->findText(hlp[iCol]));
2696        _uploadTable->setCellWidget(iRow, iCol, format);
2697      }
2698      else if (iCol == 6) {
2699        QCheckBox* com = new QCheckBox();
2700        if (hlp[iCol].toInt() == Qt::Checked) {
2701          com->setCheckState(Qt::Checked);
2702        }
2703        _uploadTable->setCellWidget(iRow, iCol, com);
2704      }
2705      else if (iCol == 12) {
2706        bncTableItem* bncIt = new bncTableItem();
2707        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2708        _uploadTable->setItem(iRow, iCol, bncIt);
2709        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2710      }
2711      else {
2712        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2713      }
2714    }
2715  }
2716}
2717
2718//
2719////////////////////////////////////////////////////////////////////////////
2720void bncWindow::slotSetUploadTrafo() {
2721  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2722  dlg->exec();
2723  delete dlg;
2724}
2725
2726// Progress Bar Change
2727////////////////////////////////////////////////////////////////////////////
2728void bncWindow::slotPostProcessingProgress(int nEpo) {
2729  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2730}
2731
2732// Post-Processing Reqc Finished
2733////////////////////////////////////////////////////////////////////////////
2734void bncWindow::slotPostProcessingFinished() {
2735  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2736  _runningPPP     = false;
2737  _runningEdit    = false;
2738  _runningQC      = false;
2739  _runningSp3Comp = false;
2740  _actStart->setText(tr("Sta&rt"));
2741  enableStartStop();
2742}
2743
2744// Edit teqc-like editing options
2745////////////////////////////////////////////////////////////////////////////
2746void bncWindow::slotReqcEditOption() {
2747  saveOptions();
2748  reqcDlg* dlg = new reqcDlg(this);
2749  dlg->move(this->pos().x()+50, this->pos().y()+50);
2750  dlg->exec();
2751  delete dlg;
2752}
2753
2754// Enable/Disable Start and Stop Buttons
2755////////////////////////////////////////////////////////////////////////////
2756void bncWindow::enableStartStop() {
2757  if ( running() ) {
2758    _actStart->setEnabled(false);
2759    if (_runningRealTime || _runningPPP) {
2760      _actStop->setEnabled(true);
2761    }
2762  }
2763  else {
2764    _actStart->setEnabled(true);
2765    _actStop->setEnabled(false);
2766  }
2767}
2768
2769// Show Map
2770////////////////////////////////////////////////////////////////////////////
2771void bncWindow::slotMapMountPoints() {
2772  saveOptions();
2773  t_bncMap* bncMap = new t_bncMap(this);
2774  bncMap->setMinimumSize(800, 600);
2775  bncMap->setWindowTitle("Selected Mountpoints");
2776
2777  bncSettings settings;
2778  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2779  while (it.hasNext()) {
2780    QStringList hlp = it.next().split(" ");
2781    if (hlp.size() < 5) continue;
2782    QUrl   url(hlp[0]);
2783    double latDeg = hlp[3].toDouble();
2784    double lonDeg = hlp[4].toDouble();
2785    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2786  }
2787
2788  bncMap->show();
2789}
2790
2791// Show Map
2792////////////////////////////////////////////////////////////////////////////
2793void bncWindow::slotMapPPP() {
2794#ifdef QT_WEBKIT
2795  saveOptions();
2796  enableWidget(false, _pppWidgets._mapWinButton);
2797  enableWidget(false, _pppWidgets._mapWinDotSize);
2798  enableWidget(false, _pppWidgets._mapWinDotColor);
2799
2800  if (!_mapWin) {
2801    _mapWin = new bncMapWin(this);
2802    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2803    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2804            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2805  }
2806  _mapWin->show();
2807#else
2808  QMessageBox::information(this, "Information",
2809                           "Qt Library compiled without QtWebKit");
2810#endif
2811}
2812
2813// Show Map
2814////////////////////////////////////////////////////////////////////////////
2815void bncWindow::slotMapPPPClosed() {
2816#ifdef QT_WEBKIT
2817  enableWidget(true, _pppWidgets._mapWinButton);
2818  enableWidget(true, _pppWidgets._mapWinDotSize);
2819  enableWidget(true, _pppWidgets._mapWinDotColor);
2820  if (_mapWin) {
2821    QListIterator<bncGetThread*> it(_threads);
2822    while (it.hasNext()) {
2823      bncGetThread* thread = it.next();
2824      thread->disconnect(_mapWin);
2825    }
2826    _mapWin->deleteLater();
2827    _mapWin = 0;
2828  }
2829#endif
2830}
Note: See TracBrowser for help on using the repository browser.