source: ntrip/branches/BNC_2.12/src/bncwindow.cpp @ 8632

Last change on this file since 8632 was 8632, checked in by stuerze, 2 months ago

some updates to support RINEX Version 3.04

File size: 149.0 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70#  include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83  const static QPalette paletteWhite(QColor(255, 255, 255));
84  const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87  BNC_CORE->setConfFileName("");
88#endif
89
90  _caster    = 0;
91  _casterEph = 0;
92
93  _bncFigure     = new bncFigure(this);
94  _bncFigureLate = new bncFigureLate(this);
95  _bncFigurePPP  = new bncFigurePPP(this);
96
97  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
102
103  _runningRealTime    = false;
104  _runningPPP         = false;
105  _runningEdit        = false;
106  _runningQC          = false;
107  _runningSp3Comp     = false;
108  _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110  _mapWin = 0;
111
112  int ww = QFontMetrics(this->font()).width('w');
113
114  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116  setMinimumSize(100*ww, 70*ww);
117
118  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121          this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123  // Create Actions
124  // --------------
125  _actHelp = new QAction(tr("&Help Contents"),this);
126  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128  _actAbout = new QAction(tr("&About BNC"),this);
129  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131  _actFlowchart = new QAction(tr("&Flow Chart"),this);
132  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134  _actFontSel = new QAction(tr("Select &Font"),this);
135  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140  _actQuit  = new QAction(tr("&Quit"),this);
141  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148  _actDeleteMountPoints->setEnabled(false);
149
150  _actMapMountPoints = new QAction(tr("&Map"),this);
151  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153  _actStart = new QAction(tr("Sta&rt"),this);
154  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156  _actStop = new QAction(tr("Sto&p"),this);
157  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158
159  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
160  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
161
162  CreateMenu();
163  AddToolbar();
164
165  bncSettings settings;
166
167  // Network Options
168  // ---------------
169  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
170  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
171
172  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
173          this, SLOT(slotBncTextChanged()));
174
175  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
176  _sslIgnoreErrorsCheckBox = new QCheckBox();
177  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
178                                          settings.value("sslIgnoreErrors").toInt()));
179
180  // General Options
181  // ---------------
182  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
183  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
184  _rnxAppendCheckBox  = new QCheckBox();
185  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
186                                    settings.value("rnxAppend").toInt()));
187  _onTheFlyComboBox = new QComboBox();
188  _onTheFlyComboBox->setEditable(false);
189  _onTheFlyComboBox->addItems(QString("no, 1 day,1 hour,5 min,1 min").split(","));
190  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
191  if (ii != -1) {
192    _onTheFlyComboBox->setCurrentIndex(ii);
193  }
194  _autoStartCheckBox  = new QCheckBox();
195  _autoStartCheckBox->setCheckState(Qt::CheckState(
196                                    settings.value("autoStart").toInt()));
197
198  // RINEX Observations Options
199  // --------------------------
200  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
201  _rnxIntrComboBox    = new QComboBox();
202  _rnxIntrComboBox->setEditable(false);
203  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
205  if (ii != -1) {
206    _rnxIntrComboBox->setCurrentIndex(ii);
207  }
208  _rnxSamplComboBox    = new QComboBox();
209  _rnxSamplComboBox->setEditable(false);
210  _rnxSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
211  int ij = _rnxSamplComboBox->findText(settings.value("rnxSampl").toString());
212  if (ij != -1) {
213    _rnxSamplComboBox->setCurrentIndex(ij);
214  }
215  _rnxFileCheckBox = new QCheckBox();
216  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
217  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
218  _rnxSkelLineEdit->setMaximumWidth(5*ww);
219  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
220  _rnxV3CheckBox      = new QCheckBox();
221  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
222  QString hlp = settings.value("rnxV2Priority").toString();
223  if (hlp.isEmpty()) {
224    hlp = "G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:128&DPX C:7&DPZ I:ABCX S:1&C S:5&IQX";
225  }
226  _rnxV2Priority = new QLineEdit(hlp);
227
228  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
229          this, SLOT(slotBncTextChanged()));
230  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
231          this, SLOT(slotBncTextChanged()));
232
233  // RINEX Ephemeris Options
234  // -----------------------
235  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
236  _ephIntrComboBox    = new QComboBox();
237  _ephIntrComboBox->setEditable(false);
238  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
239  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
240  if (jj != -1) {
241    _ephIntrComboBox->setCurrentIndex(jj);
242  }
243  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
244  _ephV3CheckBox = new QCheckBox();
245  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
246
247  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
248          this, SLOT(slotBncTextChanged()));
249
250  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
251          this, SLOT(slotBncTextChanged()));
252
253  // Broadcast Corrections Options
254  // -----------------------------
255  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
256  _corrIntrComboBox    = new QComboBox();
257  _corrIntrComboBox->setEditable(false);
258  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
259  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
260  if (mm != -1) {
261    _corrIntrComboBox->setCurrentIndex(mm);
262  }
263  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
264
265  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
266          this, SLOT(slotBncTextChanged()));
267
268  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
269          this, SLOT(slotBncTextChanged()));
270
271  // Feed Engine Options
272  // -------------------
273  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
274  _outWaitSpinBox   = new QSpinBox();
275  _outWaitSpinBox->setMinimum(1);
276  _outWaitSpinBox->setMaximum(30);
277  _outWaitSpinBox->setSingleStep(1);
278  _outWaitSpinBox->setSuffix(" sec");
279  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
280  _outSamplComboBox    = new QComboBox();
281  _outSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
282  int nn = _outSamplComboBox->findText(settings.value("outSampl").toString());
283    if (nn != -1) {
284      _outSamplComboBox->setCurrentIndex(nn);
285    }
286  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
287  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
288  _outLockTimeCheckBox = new QCheckBox();
289  _outLockTimeCheckBox->setCheckState(Qt::CheckState(settings.value("outLockTime").toInt()));
290
291  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
292          this, SLOT(slotBncTextChanged()));
293
294  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
295          this, SLOT(slotBncTextChanged()));
296
297  connect(_outLockTimeCheckBox, SIGNAL(stateChanged(int)),
298          this, SLOT(slotBncTextChanged()));
299
300  // Serial Output Options
301  // ---------------------
302  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
303  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
304  _serialBaudRateComboBox = new QComboBox();
305  _serialBaudRateComboBox->addItems(QString("110,300,600,"
306            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
307  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
308  if (kk != -1) {
309    _serialBaudRateComboBox->setCurrentIndex(kk);
310  }
311  _serialFlowControlComboBox = new QComboBox();
312  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
313  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
314  if (kk != -1) {
315    _serialFlowControlComboBox->setCurrentIndex(kk);
316  }
317  _serialDataBitsComboBox = new QComboBox();
318  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
319  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
320  if (kk != -1) {
321    _serialDataBitsComboBox->setCurrentIndex(kk);
322  }
323  _serialParityComboBox   = new QComboBox();
324  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
325  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
326  if (kk != -1) {
327    _serialParityComboBox->setCurrentIndex(kk);
328  }
329  _serialStopBitsComboBox = new QComboBox();
330  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
331  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
332  if (kk != -1) {
333    _serialStopBitsComboBox->setCurrentIndex(kk);
334  }
335  _serialAutoNMEAComboBox  = new QComboBox();
336  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
337  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
338  if (kk != -1) {
339    _serialAutoNMEAComboBox->setCurrentIndex(kk);
340  }
341  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
342  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
343
344  _serialManualNMEASamplingSpinBox = new QSpinBox();
345  _serialManualNMEASamplingSpinBox->setMinimum(0);
346  _serialManualNMEASamplingSpinBox->setMaximum(300);
347  _serialManualNMEASamplingSpinBox->setSingleStep(10);
348  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
349  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
350
351  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
352          this, SLOT(slotBncTextChanged()));
353
354  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
355          this, SLOT(slotBncTextChanged()));
356
357  // Outages Options
358  // ---------------
359  _adviseObsRateComboBox    = new QComboBox();
360  _adviseObsRateComboBox->setEditable(false);
361  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
362  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
363  if (kk != -1) {
364    _adviseObsRateComboBox->setCurrentIndex(kk);
365  }
366  _adviseFailSpinBox = new QSpinBox();
367  _adviseFailSpinBox->setMinimum(0);
368  _adviseFailSpinBox->setMaximum(60);
369  _adviseFailSpinBox->setSingleStep(1);
370  _adviseFailSpinBox->setSuffix(" min");
371  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
372  _adviseRecoSpinBox = new QSpinBox();
373  _adviseRecoSpinBox->setMinimum(0);
374  _adviseRecoSpinBox->setMaximum(60);
375  _adviseRecoSpinBox->setSingleStep(1);
376  _adviseRecoSpinBox->setSuffix(" min");
377  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
378  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
379
380  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
381          this, SLOT(slotBncTextChanged()));
382
383  // Miscellaneous Options
384  // ---------------------
385  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
386  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
387  _miscIntrComboBox   = new QComboBox();
388  _miscIntrComboBox->setEditable(false);
389  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
390  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
391  if (ll != -1) {
392    _miscIntrComboBox->setCurrentIndex(ll);
393  }
394  _miscScanRTCMCheckBox  = new QCheckBox();
395  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
396                                    settings.value("miscScanRTCM").toInt()));
397
398  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
399          this, SLOT(slotBncTextChanged()));
400
401  // Streams
402  // -------
403  _mountPointsTable   = new QTableWidget(0,9);
404
405  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
406  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
407  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
408  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
409  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
410  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
411  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
412  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
413  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
414  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
415  _mountPointsTable->setHorizontalHeaderLabels(labels);
416  _mountPointsTable->setGridStyle(Qt::NoPen);
417  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
418  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
419  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
420  _mountPointsTable->hideColumn(0);
421  _mountPointsTable->hideColumn(3);
422  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
423          SLOT(slotSelectionChanged()));
424  populateMountPointsTable();
425
426  _log = new QTextEdit();
427  _log->setReadOnly(true);
428  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
429  _log->setFont(msFont);
430  _log->document()->setMaximumBlockCount(1000);
431
432  // Combine Corrections
433  // -------------------
434  _cmbTable = new QTableWidget(0,3);
435  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
436  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
437  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
438  _cmbTable->setMaximumWidth(30*ww);
439  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
440  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
441  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
442  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
443  _cmbTable->horizontalHeader()->setStretchLastSection(true);
444  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
445
446  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
447  _cmbUseGlonass     = new QCheckBox();
448  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
449
450  _cmbSamplSpinBox = new QSpinBox;
451  _cmbSamplSpinBox->setMinimum(10);
452  _cmbSamplSpinBox->setMaximum(60);
453  _cmbSamplSpinBox->setSingleStep(10);
454  _cmbSamplSpinBox->setMaximumWidth(9*ww);
455  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
456  _cmbSamplSpinBox->setSuffix(" sec");
457
458  QPushButton* addCmbRowButton = new QPushButton("Add Row");
459  QPushButton* delCmbRowButton = new QPushButton("Delete");
460
461  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
462          SLOT(slotBncTextChanged()));
463
464  _cmbMethodComboBox = new QComboBox();
465  _cmbMethodComboBox->setEditable(false);
466  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
467  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
468  if (im != -1) {
469    _cmbMethodComboBox->setCurrentIndex(im);
470  }
471
472  int iRow = _cmbTable->rowCount();
473  if (iRow > 0) {
474    enableWidget(true, _cmbMethodComboBox);
475    enableWidget(true, _cmbMaxresLineEdit);
476    enableWidget(true, _cmbSamplSpinBox);
477    enableWidget(true, _cmbUseGlonass);
478  }
479  else {
480    enableWidget(false, _cmbMethodComboBox);
481    enableWidget(false, _cmbMaxresLineEdit);
482    enableWidget(false, _cmbSamplSpinBox);
483    enableWidget(false, _cmbUseGlonass);
484  }
485
486  // Upload Results
487  // -------------
488  _uploadTable = new QTableWidget(0,12);
489  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
490  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
491  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
492  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
493  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
494  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
495  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
496  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
497  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
498  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
499  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
500  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
501  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
502  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
503  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
504  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
505  _uploadTable->horizontalHeader()->setStretchLastSection(true);
506  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
507
508  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
509          SLOT(slotBncTextChanged()));
510
511  QPushButton* addUploadRowButton = new QPushButton("Add Row");
512  QPushButton* delUploadRowButton = new QPushButton("Del Row");
513  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
514  _uploadIntrComboBox = new QComboBox;
515  _uploadIntrComboBox->setEditable(false);
516  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
517  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
518  if (ii != -1) {
519    _uploadIntrComboBox->setCurrentIndex(ii);
520  }
521
522  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
523  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
524
525  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
526  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
527  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
528  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
529  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
530  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
531  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
532
533  _uploadSamplSp3SpinBox = new QSpinBox;
534  _uploadSamplSp3SpinBox->setMinimum(0);
535  _uploadSamplSp3SpinBox->setMaximum(15);
536  _uploadSamplSp3SpinBox->setSingleStep(1);
537  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
538  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
539  _uploadSamplSp3SpinBox->setSuffix(" min");
540
541  _uploadSamplClkRnxSpinBox = new QSpinBox;
542  _uploadSamplClkRnxSpinBox->setMinimum(0);
543  _uploadSamplClkRnxSpinBox->setMaximum(60);
544  _uploadSamplClkRnxSpinBox->setSingleStep(5);
545  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
546  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
547  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
548
549  int iRowT = _uploadTable->rowCount();
550  if (iRowT > 0) {
551    enableWidget(true, _uploadIntrComboBox);
552    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
553    enableWidget(true, _uploadSamplSp3SpinBox);
554    enableWidget(true, _uploadSamplClkRnxSpinBox);
555    enableWidget(true, _uploadAntexFile);
556  }
557  else {
558    enableWidget(false, _uploadIntrComboBox);
559    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
560    enableWidget(false, _uploadSamplSp3SpinBox);
561    enableWidget(false, _uploadSamplClkRnxSpinBox);
562    enableWidget(false, _uploadAntexFile);
563  }
564
565  // Upload RTCM3 Ephemeris
566  // ----------------------
567  _uploadEphHostLineEdit       = new QLineEdit(settings.value("uploadEphHost").toString());
568  _uploadEphPortLineEdit       = new QLineEdit(settings.value("uploadEphPort").toString());
569  _uploadEphPasswordLineEdit   = new QLineEdit(settings.value("uploadEphPassword").toString());
570  _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
571  _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
572  _uploadEphSampleSpinBox      = new QSpinBox;
573  _uploadEphSampleSpinBox->setMinimum(5);
574  _uploadEphSampleSpinBox->setMaximum(60);
575  _uploadEphSampleSpinBox->setSingleStep(5);
576  _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
577  _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
578  _uploadEphSampleSpinBox->setSuffix(" sec");
579  _uploadEphBytesCounter       = new bncBytesCounter;
580
581  // Canvas with Editable Fields
582  // ---------------------------
583  _canvas = new QWidget;
584  setCentralWidget(_canvas);
585
586  _aogroup = new QTabWidget();
587  _aogroup->setElideMode(Qt::ElideNone);
588  _aogroup->setUsesScrollButtons(true);
589  QWidget* pgroup = new QWidget();
590  QWidget* ggroup = new QWidget();
591  QWidget* sgroup = new QWidget();
592  QWidget* egroup = new QWidget();
593  QWidget* agroup = new QWidget();
594  QWidget* cgroup = new QWidget();
595  QWidget* ogroup = new QWidget();
596  QWidget* rgroup = new QWidget();
597  QWidget* sergroup = new QWidget();
598  QWidget* pppGroup1 = new QWidget();
599  QWidget* pppGroup2 = new QWidget();
600  QWidget* pppGroup3 = new QWidget();
601  QWidget* pppGroup4 = new QWidget();
602  QWidget* reqcgroup = new QWidget();
603  QWidget* sp3CompGroup = new QWidget();
604  QWidget* cmbgroup = new QWidget();
605  QWidget* uploadgroup = new QWidget();
606  QWidget* uploadEphgroup = new QWidget();
607  _aogroup->addTab(pgroup,tr("Network"));
608  _aogroup->addTab(ggroup,tr("General"));
609  _aogroup->addTab(ogroup,tr("RINEX Observations"));
610  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
611  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
612  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
613  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
614  _aogroup->addTab(sgroup,tr("Feed Engine"));
615  _aogroup->addTab(sergroup,tr("Serial Output"));
616  _aogroup->addTab(agroup,tr("Outages"));
617  _aogroup->addTab(rgroup,tr("Miscellaneous"));
618  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
619  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
620  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
621  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
622  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
623  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
624  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
625
626  // Log Tab
627  // -------
628  _loggroup = new QTabWidget();
629  _loggroup->addTab(_log,tr("Log"));
630  _loggroup->addTab(_bncFigure,tr("Throughput"));
631  _loggroup->addTab(_bncFigureLate,tr("Latency"));
632  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
633
634  // Netowork (Proxy and SSL) Tab
635  // ----------------------------
636  QGridLayout* pLayout = new QGridLayout;
637  pLayout->setColumnMinimumWidth(0,13*ww);
638  _proxyPortLineEdit->setMaximumWidth(9*ww);
639
640  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
641  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
642  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
643  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
644  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
645  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
646  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
647  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
648  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
649  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
650  pLayout->addWidget(new QLabel(""),                                         5, 1);
651  pLayout->setRowStretch(6, 999);
652
653  pgroup->setLayout(pLayout);
654
655  // General Tab
656  // -----------
657  QGridLayout* gLayout = new QGridLayout;
658  gLayout->setColumnMinimumWidth(0,14*ww);
659  _onTheFlyComboBox->setMaximumWidth(9*ww);
660
661  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
662  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
663  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
664  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
665  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
666  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
667  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
668  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
669  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
670  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
671  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
672  gLayout->addWidget(new QLabel(""),                             6, 1);
673  gLayout->setRowStretch(7, 999);
674
675  ggroup->setLayout(gLayout);
676
677  // RINEX Observations
678  // ------------------
679  QGridLayout* oLayout = new QGridLayout;
680  oLayout->setColumnMinimumWidth(0,14*ww);
681  _rnxIntrComboBox->setMaximumWidth(9*ww);
682  _rnxSamplComboBox->setMaximumWidth(9*ww);
683
684  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
685  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
686  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
687  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
688  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
689  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
690  oLayout->addWidget(_rnxSamplComboBox,                             2, 3, Qt::AlignLeft);
691  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
692  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
693  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
694  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
695  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
696  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
697  oLayout->addWidget(new QLabel("Version 2 signal priority"),      5, 0);
698  oLayout->addWidget(_rnxV2Priority,                               5, 1, 1, 15);
699  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
700  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
701  oLayout->addWidget(new QLabel(""),                               7, 1);
702  oLayout->setRowStretch(8, 999);
703
704  ogroup->setLayout(oLayout);
705
706  // RINEX Ephemeris
707  // ---------------
708  QGridLayout* eLayout = new QGridLayout;
709  eLayout->setColumnMinimumWidth(0,14*ww);
710  _ephIntrComboBox->setMaximumWidth(9*ww);
711  _ephOutPortLineEdit->setMaximumWidth(9*ww);
712
713  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
714  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
715  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
716  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
717  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
718  eLayout->addWidget(new QLabel("Port"),                          3, 0);
719  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
720  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
721  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
722  eLayout->setRowStretch(5, 999);
723
724  egroup->setLayout(eLayout);
725
726
727  // Broadcast Corrections
728  // ---------------------
729  QGridLayout* cLayout = new QGridLayout;
730  cLayout->setColumnMinimumWidth(0,14*ww);
731  _corrIntrComboBox->setMaximumWidth(9*ww);
732  _corrPortLineEdit->setMaximumWidth(9*ww);
733
734  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
735  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
736  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
737  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
738  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
739  cLayout->addWidget(new QLabel("Port"),                          3, 0);
740  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
741  cLayout->addWidget(new QLabel(""),                              4, 1);
742  cLayout->setRowStretch(7, 999);
743  cgroup->setLayout(cLayout);
744
745  // Feed Engine
746  // -----------
747  QGridLayout* sLayout = new QGridLayout;
748  sLayout->setColumnMinimumWidth(0,14*ww);
749  _outPortLineEdit->setMaximumWidth(9*ww);
750  _outWaitSpinBox->setMaximumWidth(9*ww);
751  _outSamplComboBox->setMaximumWidth(9*ww);
752  _outUPortLineEdit->setMaximumWidth(9*ww);
753
754  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
755  sLayout->addWidget(new QLabel("Port"),                            1, 0);
756  sLayout->addWidget(_outPortLineEdit,                              1, 1);
757  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
758  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
759  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
760  sLayout->addWidget(_outSamplComboBox,                              2, 1, Qt::AlignLeft);
761  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
762  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
763  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
764  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
765  sLayout->addWidget(new QLabel("Print lock time"),                 5, 0);
766  sLayout->addWidget(_outLockTimeCheckBox,                        5, 1);
767  sLayout->addWidget(new QLabel(""),                                6, 1);
768  sLayout->setRowStretch(7, 999);
769
770  sgroup->setLayout(sLayout);
771
772  // Serial Output
773  // -------------
774  QGridLayout* serLayout = new QGridLayout;
775  serLayout->setColumnMinimumWidth(0,12*ww);
776  _serialBaudRateComboBox->setMaximumWidth(9*ww);
777  _serialFlowControlComboBox->setMaximumWidth(11*ww);
778  _serialDataBitsComboBox->setMaximumWidth(5*ww);
779  _serialParityComboBox->setMaximumWidth(9*ww);
780  _serialStopBitsComboBox->setMaximumWidth(5*ww);
781  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
782  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
783  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
784
785  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
786  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
787  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
788  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
789  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
790  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
791  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
792  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
793  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
794  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
795  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
796  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
797  serLayout->addWidget(_serialParityComboBox,                     4, 3);
798  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
799  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
800  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
801  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
802  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
803  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
804  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
805  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
806  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
807  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
808  serLayout->addWidget(new QLabel(""),                            6, 1);
809  serLayout->setRowStretch(7, 999);
810
811  sergroup->setLayout(serLayout);
812
813  // Outages
814  // -------
815  QGridLayout* aLayout = new QGridLayout;
816  aLayout->setColumnMinimumWidth(0,14*ww);
817  _adviseObsRateComboBox->setMaximumWidth(9*ww);
818  _adviseFailSpinBox->setMaximumWidth(9*ww);
819  _adviseRecoSpinBox->setMaximumWidth(9*ww);
820
821  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
822  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
823  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
824  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
825  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
826  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
827  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
828  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
829  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
830  aLayout->addWidget(new QLabel(""),                              5, 1);
831  aLayout->setRowStretch(6, 999);
832
833  agroup->setLayout(aLayout);
834
835  // Miscellaneous
836  // -------------
837  QGridLayout* rLayout = new QGridLayout;
838  rLayout->setColumnMinimumWidth(0,14*ww);
839  _miscIntrComboBox->setMaximumWidth(9*ww);
840  _miscPortLineEdit->setMaximumWidth(9*ww);
841
842  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
843  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
844  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
845  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
846  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
847  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
848  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
849  rLayout->addWidget(new QLabel("Port"),                          4, 0);
850  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
851  rLayout->addWidget(new QLabel(""),                              5, 1);
852  rLayout->setRowStretch(6, 999);
853
854  rgroup->setLayout(rLayout);
855
856  // PPP
857  // ---
858  _pppWidgets._dataSource->setMaximumWidth(20*ww);
859  _pppWidgets._corrMount->setMaximumWidth(20*ww);
860
861  _pppWidgets._corrFile->setMaximumWidth(35*ww);
862  _pppWidgets._crdFile->setMaximumWidth(35*ww);
863  _pppWidgets._logPath->setMaximumWidth(35*ww);
864  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
865  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
866  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
867  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
868
869  QGridLayout* pppLayout1 = new QGridLayout();
870  int ir = 0;
871  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
872  ++ir;
873  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
874  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
875  pppLayout1->addWidget(new QLabel("   RINEX Obs file"),     ir, 3);
876  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 4, 1, 3);
877  ++ir;
878  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
879  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
880  pppLayout1->addWidget(new QLabel("   RINEX Nav file"),     ir, 3);
881  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 4, 1, 3);
882  ++ir;
883  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 0);
884  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 1);
885  pppLayout1->addWidget(new QLabel("   ANTEX file"),         ir, 3);
886  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 4, 1, 3);
887  ++ir;
888  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
889  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
890  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 3);
891  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 4, 1, 3);
892  ++ir;
893  pppLayout1->addWidget(new QLabel("Logfile directory"),     ir, 0);
894  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 1);
895  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 3);
896  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 4, 1, 3);
897  ++ir;
898  pppLayout1->addWidget(new QLabel("SNX TRO directory"),     ir, 0);
899  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 1);
900  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 3);
901  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 4);
902  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 5);
903  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 6, Qt::AlignRight);
904  ++ir;
905  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 3);
906  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 4);
907  pppLayout1->addWidget(new QLabel("   SNX TRO solution")    ,ir, 5);
908  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 6, Qt::AlignRight);
909  pppLayout1->setRowStretch(ir, 999);
910
911  pppGroup1->setLayout(pppLayout1);
912
913  QVBoxLayout* pppLayout2 = new QVBoxLayout();
914  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
915  pppLayout2->addWidget(_pppWidgets._staTable, 99);
916  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
917  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
918  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
919  pppLayout2sub->addStretch(99);
920
921  pppLayout2->addLayout(pppLayout2sub);
922
923  pppGroup2->setLayout(pppLayout2);
924
925  QGridLayout* pppLayout3 = new QGridLayout();
926  ir = 0;
927  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
928  ++ir;
929  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
930  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
931  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
932  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
933  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
934  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
935  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
936  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
937  ++ir;
938  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
939  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
940  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
941  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
942  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
943  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
944  ++ir;
945  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
946  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
947  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
948  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
949  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
950  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
951  ++ir;
952  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
953  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
954  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
955  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
956  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
957  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
958  ++ir;
959  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
960  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
961  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
962  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
963  ++ir;
964  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
965  pppLayout3->setColumnStretch(8, 999);
966  ++ir;
967  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
968  pppLayout3->setRowStretch(ir, 999);
969
970  pppGroup3->setLayout(pppLayout3);
971
972  // ------------------------
973  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
974  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
975  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
976
977  QGridLayout* pppLayout4 = new QGridLayout();
978  ir = 0;
979  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
980  ++ir;
981  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
982  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
983  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
984  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
985  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
986
987  ++ir;
988  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
989  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
990  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
991  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
992  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
993  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
994  ++ir;
995  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
996  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
997  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
998  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
999  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
1000  ++ir;
1001  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
1002  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
1003  ++ir;
1004  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
1005  pppLayout4->setRowStretch(ir, 999);
1006
1007  pppGroup4->setLayout(pppLayout4);
1008
1009  // Reqc Processing
1010  // ---------------
1011  _reqcActionComboBox = new QComboBox();
1012  _reqcActionComboBox->setEditable(false);
1013  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1014  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1015  if (ik != -1) {
1016    _reqcActionComboBox->setCurrentIndex(ik);
1017  }
1018  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1019          this, SLOT(slotBncTextChanged()));
1020
1021  QGridLayout* reqcLayout = new QGridLayout;
1022  _reqcActionComboBox->setMinimumWidth(15*ww);
1023  _reqcActionComboBox->setMaximumWidth(20*ww);
1024
1025  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1026  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1027
1028  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1029  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1030  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1031  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1032  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1033  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1034  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1035
1036  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1037          this, SLOT(slotBncTextChanged()));
1038
1039  _reqcLogSummaryOnly = new QCheckBox();
1040  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1041
1042  ir = 0;
1043  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1044  ++ir;
1045  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1046  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1047  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1048  _reqcEditOptionButton->setMinimumWidth(15*ww);
1049  _reqcEditOptionButton->setMaximumWidth(20*ww);
1050
1051  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1052  ++ir;
1053  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1054  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1055  _reqcObsFileChooser->setMaximumWidth(40*ww);
1056  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1057  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1058  _reqcNavFileChooser->setMaximumWidth(40*ww);
1059  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1060  ++ir;
1061  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1062  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1063  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1064  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1065  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1066  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1067  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1068  ++ir;
1069  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1070  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1071  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1072  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1073  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1074  ++ir;
1075  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1076  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1077  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1078  ++ir;
1079  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1080  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1081  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1082  ++ir;
1083  reqcLayout->setRowStretch(ir, 999);
1084
1085  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1086  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1087
1088  reqcgroup->setLayout(reqcLayout);
1089
1090  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1091          this, SLOT(slotReqcEditOption()));
1092
1093  QGridLayout* sp3CompLayout = new QGridLayout;
1094
1095  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1096  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1097  _sp3CompFileChooser->setMinimumWidth(15*ww);
1098  _sp3CompFileChooser->setMaximumWidth(40*ww);
1099
1100  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1101  _sp3CompExclude->setMinimumWidth(18*ww);
1102  _sp3CompExclude->setMaximumWidth(18*ww);
1103
1104  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1105  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1106  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1107
1108  ir = 0;
1109  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1110  ++ir;
1111  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1112  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1113  ++ir;
1114  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1115  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1116  ++ir;
1117  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1118  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1119  ++ir;
1120  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1121  ++ir;
1122  sp3CompLayout->setRowStretch(ir, 999);
1123
1124  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1125  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1126
1127  sp3CompGroup->setLayout(sp3CompLayout);
1128
1129  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1130          this, SLOT(slotBncTextChanged()));
1131
1132  // Combine Corrections
1133  // -------------------
1134  QGridLayout* cmbLayout = new QGridLayout;
1135
1136  populateCmbTable();
1137  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1138  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1139  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1140  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1141  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1142  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1143  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1144  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1145  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1146  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1147  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1148  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1149  cmbLayout->setRowStretch(7, 999);
1150
1151  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1152  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1153
1154  cmbgroup->setLayout(cmbLayout);
1155
1156  // Upload Layout (Clocks)
1157  // ----------------------
1158  QGridLayout* uploadHlpLayout = new QGridLayout();
1159
1160  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1161  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1162  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1163
1164  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1165  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1166  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1167  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1168  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1169  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1170  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1171  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1172  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1173  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1174  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1175  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1176  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1177
1178  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1179  populateUploadTable();
1180
1181  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1182  uploadLayout->addWidget(_uploadTable);
1183  uploadLayout->addLayout(uploadHlpLayout);
1184
1185  uploadgroup->setLayout(uploadLayout);
1186
1187  // Upload Layout (Ephemeris)
1188  // -------------------------
1189  QGridLayout* uploadLayoutEph = new QGridLayout;
1190
1191  uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1192  _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1193  _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1194  _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1195
1196  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1197  uploadLayoutEph->addWidget(new QLabel("Host"),                  1, 0);
1198  uploadLayoutEph->addWidget(_uploadEphHostLineEdit,              1, 1, 1, 3);
1199  uploadLayoutEph->addWidget(new QLabel("  Port"),                1, 4, Qt::AlignRight);
1200  uploadLayoutEph->addWidget(_uploadEphPortLineEdit,              1, 5, 1, 1);
1201  uploadLayoutEph->addWidget(new QLabel("Mountpoint           "), 2, 0);
1202  uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit,        2, 1);
1203  uploadLayoutEph->addWidget(new QLabel("          Password"),    2, 2, Qt::AlignRight);
1204  uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit,          2, 3);
1205  uploadLayoutEph->addWidget(new QLabel("Sampling"),              3, 0);
1206  uploadLayoutEph->addWidget(_uploadEphSampleSpinBox,             3, 1);
1207  uploadLayoutEph->addWidget(new QLabel("Uploaded"),              4, 0);
1208  uploadLayoutEph->addWidget(_uploadEphBytesCounter,              4, 1);
1209  uploadLayoutEph->setRowStretch(5, 999);
1210
1211  uploadEphgroup->setLayout(uploadLayoutEph);
1212
1213  connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1214          this, SLOT(slotBncTextChanged()));
1215
1216  // Main Layout
1217  // -----------
1218  QGridLayout* mLayout = new QGridLayout;
1219  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1220  mLayout->addWidget(_aogroup,            0,0);
1221  mLayout->addWidget(_mountPointsTable,   1,0);
1222  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1223  mLayout->addWidget(_loggroup,           2,0);
1224
1225  _canvas->setLayout(mLayout);
1226
1227  // WhatsThis, Network
1228  // ------------------
1229  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1230  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1231  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1232  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.</p>"));
1233
1234  // WhatsThis, General
1235  // ------------------
1236  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1237  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1238  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1239  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1240  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1241
1242  // WhatsThis, RINEX Observations
1243  // -----------------------------
1244  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1245  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1246  _rnxSamplComboBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. </p>"));
1247  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. </p>"));
1248  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1249  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1250  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'I:ABCX' (System specific signal priorities for IRNSS) </li><li>'G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLX G:5&IQX R:12&PC R:3&IQX R:46&ABX E:16&BCXZ E:578&IQX J:1&SLXCZ J:26&SLX J:5&IQX C:267&IQX C:128&DPX C:7&DPZ I:ABCX S:1&C S:5&IQX'. <i>[key: rnxV2Priority]</i></p>"));
1251  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1252
1253  // WhatsThis, RINEX Ephemeris
1254  // --------------------------
1255  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1256  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1257  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1258  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1259
1260  // WhatsThis, RINEX Editing & QC
1261  // -----------------------------
1262  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1263  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1264  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1265  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1266  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1267  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1268  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1269  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1270  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1271  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default.</p>"));
1272
1273  // WhatsThis, SP3 Comparison
1274  // -------------------------
1275  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1276  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1277  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1278
1279  // WhatsThis, Broadcast Corrections
1280  // --------------------------------
1281  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1282  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1283  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1284
1285  // WhatsThis, Feed Engine
1286  // ----------------------
1287  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1288  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1289  _outSamplComboBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds. </p>"));
1290  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1291  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1292  _outLockTimeCheckBox->setWhatsThis(tr("<p>Print the lock time in seconds in the feed engine output.</p>"));
1293
1294  // WhatsThis, Serial Output
1295  // ------------------------
1296  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1297  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1298  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1299  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1300  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1301  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1302  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1303  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1304  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1305  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1306  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1307
1308  // WhatsThis, Outages
1309  // ------------------
1310  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1311  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1312  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1313  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1314
1315  // WhatsThis, Miscellaneous
1316  // ------------------------
1317  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1318  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1319  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1320  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1321
1322  // WhatsThis, PPP (1)
1323  // ------------------
1324  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1325  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1326  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1327  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1328  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1329  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1330  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1331  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1332  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1333  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1334  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1335  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1336  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p>"));
1337  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files.</p>"));
1338  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC.</p>"));
1339
1340  // WhatsThis, PPP (3)
1341  // ------------------
1342  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1343  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1344  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1345  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1346  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1347  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1348  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1349  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1350  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1351  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1352  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1353  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.</p>"));
1354
1355  // WhatsThis, Combine Corrections
1356  // ------------------------------
1357  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1358  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1359  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1360  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1361  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1362  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1363  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1364
1365  // WhatsThis, Upload Corrections
1366  // -----------------------------
1367  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1368  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1369  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the Upload Corrections' table.</p>"));
1370  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1371  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1372  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1373  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1374  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1375  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1376
1377  // WhatsThis, Upload Ephemeris
1378  // ---------------------------
1379  _uploadEphHostLineEdit->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the stream.</p><p>An empty option field means that you don't want to upload Broadcast Ephemeris.</p>"));
1380  _uploadEphPortLineEdit->setWhatsThis(tr("<p>Specify the IP port of the Ntrip Broadcaster to upload the Broadcast Ephemeris stream. Default is port 80.</p>"));
1381  _uploadEphMountpointLineEdit->setWhatsThis(tr("<p>Specify a mountpoint for uploading the Broadcast Ephemeris stream.</p>"));
1382  _uploadEphPasswordLineEdit->setWhatsThis(tr("<p>Specify the stream upload password protecting the mounpoint on the Ntrip Broadcaster.</p>"));
1383  _uploadEphSampleSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1384  _uploadEphBytesCounter->setWhatsThis(tr("<p>BNC shows the amount of data uploaded via this stream.</p>"));
1385// weber
1386
1387  // WhatsThis, Streams Canvas
1388  // -------------------------
1389  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1390  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1391  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1392  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1393  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1394  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1395
1396  // WhatsThis, Log Canvas
1397  // ---------------------
1398  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1399  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1400  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1401  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1402
1403
1404  // Enable/Disable all Widgets
1405  // --------------------------
1406  slotBncTextChanged();
1407  enableStartStop();
1408
1409  // Auto start
1410  // ----------
1411  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1412    slotStart();
1413  }
1414}
1415
1416// Destructor
1417////////////////////////////////////////////////////////////////////////////
1418bncWindow::~bncWindow() {
1419  if (_caster) {
1420    delete _caster; BNC_CORE->setCaster(0);
1421  }
1422  if (_casterEph) {
1423    delete _casterEph;
1424  }
1425  delete _bncFigureLate;
1426  delete _bncFigurePPP;
1427  delete _actHelp;
1428  delete _actAbout;
1429  delete _actFlowchart;
1430  delete _actFontSel;
1431  delete _actSaveOpt;
1432  delete _actQuit;
1433  delete _actAddMountPoints;
1434  delete _actDeleteMountPoints;
1435  delete _actMapMountPoints;
1436  delete _actStart;
1437  delete _actStop;
1438  delete _actwhatsthis;
1439  delete _proxyHostLineEdit;
1440  delete _proxyPortLineEdit;
1441  delete _sslCaCertPathLineEdit;
1442  delete _sslIgnoreErrorsCheckBox;
1443  delete _logFileLineEdit;
1444  delete _rawOutFileLineEdit;
1445  delete _rnxAppendCheckBox;
1446  delete _onTheFlyComboBox;
1447  delete _autoStartCheckBox;
1448  delete _rnxPathLineEdit;
1449  delete _rnxIntrComboBox;
1450  delete _rnxSamplComboBox;
1451  delete _rnxFileCheckBox;
1452  delete _rnxSkelLineEdit;
1453  delete _rnxScrpLineEdit;
1454  delete _rnxV3CheckBox;
1455  delete _rnxV2Priority;
1456  delete _ephPathLineEdit;
1457  delete _ephIntrComboBox;
1458  delete _ephOutPortLineEdit;
1459  delete _ephV3CheckBox;
1460  delete _corrPathLineEdit;
1461  delete _corrIntrComboBox;
1462  delete _corrPortLineEdit;
1463  delete _outPortLineEdit;
1464  delete _outWaitSpinBox;
1465  delete _outSamplComboBox;
1466  delete _outFileLineEdit;
1467  delete _outUPortLineEdit;
1468  delete _outLockTimeCheckBox;
1469  delete _serialMountPointLineEdit;
1470  delete _serialPortNameLineEdit;
1471  delete _serialBaudRateComboBox;
1472  delete _serialFlowControlComboBox;
1473  delete _serialDataBitsComboBox;
1474  delete _serialParityComboBox;
1475  delete _serialStopBitsComboBox;
1476  delete _serialAutoNMEAComboBox;
1477  delete _serialFileNMEALineEdit;
1478  delete _serialHeightNMEALineEdit;
1479  delete _serialManualNMEASamplingSpinBox;
1480  delete _adviseObsRateComboBox;
1481  delete _adviseFailSpinBox;
1482  delete _adviseRecoSpinBox;
1483  delete _adviseScriptLineEdit;
1484  delete _miscMountLineEdit;
1485  delete _miscPortLineEdit;
1486  delete _miscIntrComboBox;
1487  delete _miscScanRTCMCheckBox;
1488  _mountPointsTable->deleteLater();
1489  delete _log;
1490  _cmbTable->deleteLater();
1491  delete _cmbMaxresLineEdit;
1492  delete _cmbUseGlonass;
1493  delete _cmbSamplSpinBox;
1494  delete _cmbMethodComboBox;
1495  _uploadTable->deleteLater();
1496  delete _uploadIntrComboBox;
1497  delete _uploadAntexFile;
1498  delete _uploadSamplRtcmEphCorrSpinBox;
1499  delete _uploadSamplSp3SpinBox;
1500  delete _uploadSamplClkRnxSpinBox;
1501  delete _uploadEphHostLineEdit;
1502  delete _uploadEphPortLineEdit;
1503  delete _uploadEphPasswordLineEdit;
1504  delete _uploadEphMountpointLineEdit;
1505  delete _uploadEphSampleSpinBox;
1506  delete _uploadEphBytesCounter;
1507  delete _loggroup;
1508  delete _reqcActionComboBox;
1509  delete _reqcObsFileChooser;
1510  delete _reqcNavFileChooser;
1511  delete _reqcOutObsLineEdit;
1512  delete _reqcOutNavLineEdit;
1513  delete _reqcOutLogLineEdit;
1514  delete _reqcPlotDirLineEdit;
1515  delete _reqcSkyPlotSignals;
1516  delete _reqcLogSummaryOnly;
1517  delete _reqcEditOptionButton;
1518  delete _sp3CompFileChooser;
1519  delete _sp3CompExclude;
1520  delete _sp3CompLogLineEdit;
1521  //delete _canvas;
1522}
1523
1524//
1525////////////////////////////////////////////////////////////////////////////
1526void bncWindow::populateMountPointsTable() {
1527
1528  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1529    _mountPointsTable->removeRow(iRow);
1530  }
1531
1532  bncSettings settings;
1533
1534  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1535  int iRow = 0;
1536  while (it.hasNext()) {
1537    QStringList hlp = it.next().split(" ");
1538    if (hlp.size() < 7) continue;
1539    _mountPointsTable->insertRow(iRow);
1540
1541    QUrl    url(hlp[0]);
1542
1543    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1544    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1545    QString nmea(hlp[5]);
1546    if (hlp[6] == "S") {
1547      fullPath = hlp[0].replace(0,2,"");
1548    }
1549    QString ntripVersion = "2";
1550    if (hlp.size() >= 7) {
1551      ntripVersion = (hlp[6]);
1552    }
1553
1554    QTableWidgetItem* it;
1555    it = new QTableWidgetItem(url.userInfo());
1556    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1557    _mountPointsTable->setItem(iRow, 0, it);
1558
1559    it = new QTableWidgetItem(fullPath);
1560    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1561    _mountPointsTable->setItem(iRow, 1, it);
1562
1563    it = new QTableWidgetItem(format);
1564    _mountPointsTable->setItem(iRow, 2, it);
1565
1566    it = new QTableWidgetItem(country);
1567    _mountPointsTable->setItem(iRow, 3, it);
1568
1569    if      (nmea == "yes") {
1570      it = new QTableWidgetItem(latitude);
1571      _mountPointsTable->setItem(iRow, 4, it);
1572      it = new QTableWidgetItem(longitude);
1573      _mountPointsTable->setItem(iRow, 5, it);
1574    } else {
1575      it = new QTableWidgetItem(latitude);
1576      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1577      _mountPointsTable->setItem(iRow, 4, it);
1578
1579      it = new QTableWidgetItem(longitude);
1580      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1581      _mountPointsTable->setItem(iRow, 5, it);
1582    }
1583
1584    it = new QTableWidgetItem(nmea);
1585    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1586    _mountPointsTable->setItem(iRow, 6, it);
1587
1588    it = new QTableWidgetItem(ntripVersion);
1589    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1590    _mountPointsTable->setItem(iRow, 7, it);
1591
1592    bncTableItem* bncIt = new bncTableItem();
1593    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1594    _mountPointsTable->setItem(iRow, 8, bncIt);
1595
1596    iRow++;
1597  }
1598
1599  _mountPointsTable->sortItems(1);
1600
1601  enableStartStop();
1602}
1603
1604// Retrieve Table
1605////////////////////////////////////////////////////////////////////////////
1606void bncWindow::slotAddMountPoints() {
1607
1608  bncSettings settings;
1609  QString proxyHost = settings.value("proxyHost").toString();
1610  int     proxyPort = settings.value("proxyPort").toInt();
1611  if (proxyHost != _proxyHostLineEdit->text()         ||
1612      proxyPort != _proxyPortLineEdit->text().toInt()) {
1613    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1614                                     "changed. Use the new ones?",
1615                                     QMessageBox::Yes, QMessageBox::No,
1616                                     QMessageBox::NoButton);
1617    if      (iRet == QMessageBox::Yes) {
1618      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1619      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1620    }
1621  }
1622
1623  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1624  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1625
1626  QMessageBox msgBox;
1627  msgBox.setIcon(QMessageBox::Question);
1628  msgBox.setWindowTitle("Add Stream");
1629  msgBox.setText("Add stream(s) coming from:");
1630
1631  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1632  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1633  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1634  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1635  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1636
1637  msgBox.exec();
1638
1639  if (msgBox.clickedButton() == buttonNtrip) {
1640    bncTableDlg* dlg = new bncTableDlg(this);
1641    dlg->move(this->pos().x()+50, this->pos().y()+50);
1642    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1643          this, SLOT(slotNewMountPoints(QStringList*)));
1644    dlg->exec();
1645    delete dlg;
1646  } else if (msgBox.clickedButton() == buttonIP) {
1647    bncIpPort* ipp = new bncIpPort(this);
1648    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1649          this, SLOT(slotNewMountPoints(QStringList*)));
1650    ipp->exec();
1651    delete ipp;
1652  } else if (msgBox.clickedButton() == buttonUDP) {
1653    bncUdpPort* udp = new bncUdpPort(this);
1654    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1655          this, SLOT(slotNewMountPoints(QStringList*)));
1656    udp->exec();
1657    delete udp;
1658  } else if (msgBox.clickedButton() == buttonSerial) {
1659    bncSerialPort* sep = new bncSerialPort(this);
1660    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1661          this, SLOT(slotNewMountPoints(QStringList*)));
1662    sep->exec();
1663    delete sep;
1664  } else if (msgBox.clickedButton() == buttonCancel) {
1665    // Cancel
1666  }
1667
1668  enableStartStop();
1669}
1670
1671// Delete Selected Mount Points
1672////////////////////////////////////////////////////////////////////////////
1673void bncWindow::slotDeleteMountPoints() {
1674
1675  int nRows = _mountPointsTable->rowCount();
1676  bool flg[nRows];
1677  for (int iRow = 0; iRow < nRows; iRow++) {
1678    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1679      flg[iRow] = true;
1680    }
1681    else {
1682      flg[iRow] = false;
1683    }
1684  }
1685  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1686    if (flg[iRow]) {
1687      _mountPointsTable->removeRow(iRow);
1688    }
1689  }
1690  _actDeleteMountPoints->setEnabled(false);
1691
1692  enableStartStop();
1693}
1694
1695// New Mount Points Selected
1696////////////////////////////////////////////////////////////////////////////
1697void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1698  int iRow = 0;
1699  QListIterator<QString> it(*mountPoints);
1700  while (it.hasNext()) {
1701    QStringList hlp = it.next().split(" ");
1702    QUrl    url(hlp[0]);
1703    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1704    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1705    QString nmea(hlp[5]);
1706    if (hlp[6] == "S") {
1707      fullPath = hlp[0].replace(0,2,"");
1708    }
1709    QString ntripVersion = "2";
1710    if (hlp.size() >= 7) {
1711      ntripVersion = (hlp[6]);
1712    }
1713
1714    _mountPointsTable->insertRow(iRow);
1715
1716    QTableWidgetItem* it;
1717    it = new QTableWidgetItem(url.userInfo());
1718    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1719    _mountPointsTable->setItem(iRow, 0, it);
1720
1721    it = new QTableWidgetItem(fullPath);
1722    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1723    _mountPointsTable->setItem(iRow, 1, it);
1724
1725    it = new QTableWidgetItem(format);
1726    _mountPointsTable->setItem(iRow, 2, it);
1727
1728    it = new QTableWidgetItem(country);
1729    _mountPointsTable->setItem(iRow, 3, it);
1730
1731    if      (nmea == "yes") {
1732    it = new QTableWidgetItem(latitude);
1733    _mountPointsTable->setItem(iRow, 4, it);
1734    it = new QTableWidgetItem(longitude);
1735    _mountPointsTable->setItem(iRow, 5, it);
1736    } else {
1737    it = new QTableWidgetItem(latitude);
1738    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1739    _mountPointsTable->setItem(iRow, 4, it);
1740    it = new QTableWidgetItem(longitude);
1741    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1742    _mountPointsTable->setItem(iRow, 5, it);
1743    }
1744
1745    it = new QTableWidgetItem(nmea);
1746    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1747    _mountPointsTable->setItem(iRow, 6, it);
1748
1749    it = new QTableWidgetItem(ntripVersion);
1750    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1751    _mountPointsTable->setItem(iRow, 7, it);
1752
1753    bncTableItem* bncIt = new bncTableItem();
1754    _mountPointsTable->setItem(iRow, 8, bncIt);
1755
1756    iRow++;
1757  }
1758  _mountPointsTable->hideColumn(0);
1759  _mountPointsTable->hideColumn(3);
1760  _mountPointsTable->sortItems(1);
1761  delete mountPoints;
1762
1763  enableStartStop();
1764}
1765
1766// Save Options (serialize)
1767////////////////////////////////////////////////////////////////////////////
1768void bncWindow::slotSaveOptions() {
1769  saveOptions();
1770  bncSettings settings;
1771  settings.sync();
1772}
1773
1774// Save Options (memory only)
1775////////////////////////////////////////////////////////////////////////////
1776void bncWindow::saveOptions() {
1777
1778  QStringList mountPoints;
1779  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1780
1781    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1782      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1783                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1784
1785      mountPoints.append(url.toString() + " " +
1786                         _mountPointsTable->item(iRow, 2)->text()
1787                 + " " + _mountPointsTable->item(iRow, 3)->text()
1788                 + " " + _mountPointsTable->item(iRow, 4)->text()
1789                 + " " + _mountPointsTable->item(iRow, 5)->text()
1790                 + " " + _mountPointsTable->item(iRow, 6)->text()
1791                 + " " + _mountPointsTable->item(iRow, 7)->text());
1792    } else {
1793      mountPoints.append(
1794                  "//" + _mountPointsTable->item(iRow, 1)->text()
1795                 + " " + _mountPointsTable->item(iRow, 2)->text()
1796                 + " " + _mountPointsTable->item(iRow, 3)->text()
1797                 + " " + _mountPointsTable->item(iRow, 4)->text()
1798                 + " " + _mountPointsTable->item(iRow, 5)->text()
1799                 + " " + _mountPointsTable->item(iRow, 6)->text()
1800                 + " " + _mountPointsTable->item(iRow, 7)->text());
1801    }
1802  }
1803
1804  QStringList cmbStreams;
1805  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1806    QString hlp;
1807    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1808      if (_cmbTable->item(iRow, iCol)) {
1809        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1810      }
1811    }
1812    if (!hlp.isEmpty()) {
1813      cmbStreams << hlp;
1814    }
1815  }
1816
1817  QStringList uploadMountpointsOut;
1818  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1819    QString hlp;
1820    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1821      if (_uploadTable->cellWidget(iRow, iCol) &&
1822          (iCol == 3 || iCol == 4 || iCol == 5)) {
1823        if      (iCol == 3) {
1824          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1825          hlp += passwd->text() + ",";
1826        }
1827        else if (iCol == 4) {
1828          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1829          hlp += system->currentText() + ",";
1830        }
1831        else if (iCol == 5) {
1832          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1833          QString state; state.setNum(com->checkState());
1834          hlp +=  state + ",";
1835        }
1836      }
1837      else if (_uploadTable->item(iRow, iCol)) {
1838        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1839      }
1840    }
1841    if (!hlp.isEmpty()) {
1842      uploadMountpointsOut << hlp;
1843    }
1844  }
1845
1846  bncSettings settings;
1847
1848  settings.setValue("startTab",    _aogroup->currentIndex());
1849  settings.setValue("statusTab",   _loggroup->currentIndex());
1850  settings.setValue("mountPoints", mountPoints);
1851// Network
1852  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1853  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1854  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1855  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1856// General
1857  settings.setValue("logFile",     _logFileLineEdit->text());
1858  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1859  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1860  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1861  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1862// RINEX Observations
1863  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1864  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1865  settings.setValue("rnxSampl",     _rnxSamplComboBox->currentText());
1866  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1867  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1868  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1869  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1870   settings.setValue("rnxV3",        _rnxV3CheckBox->checkState());
1871// RINEX Ephemeris
1872  settings.setValue("ephPath",       _ephPathLineEdit->text());
1873  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1874  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1875  settings.setValue("ephV3",         _ephV3CheckBox->checkState());
1876// Broadcast Corrections
1877  settings.setValue("corrPath",    _corrPathLineEdit->text());
1878  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1879  settings.setValue("corrPort",    _corrPortLineEdit->text());
1880// Feed Engine
1881  settings.setValue("outPort",     _outPortLineEdit->text());
1882  settings.setValue("outWait",     _outWaitSpinBox->value());
1883  settings.setValue("outSampl",    _outSamplComboBox->currentText());
1884  settings.setValue("outFile",     _outFileLineEdit->text());
1885  settings.setValue("outUPort",    _outUPortLineEdit->text());
1886  settings.setValue("outLockTime",_outLockTimeCheckBox->checkState());
1887// Serial Output
1888  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1889  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1890  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1891  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1892  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1893  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1894  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1895  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1896  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1897  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1898  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1899// Outages
1900  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1901  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1902  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1903  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1904// Miscellaneous
1905  settings.setValue("miscMount",   _miscMountLineEdit->text());
1906  settings.setValue("miscPort",    _miscPortLineEdit->text());
1907  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1908  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1909// Reqc
1910  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1911  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1912  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1913  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1914  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1915  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1916  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1917  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1918  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1919// SP3 Comparison
1920  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
1921  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
1922  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1923// Combine Corrections
1924  if (!cmbStreams.isEmpty()) {
1925    settings.setValue("cmbStreams", cmbStreams);
1926  }
1927  else {
1928    settings.setValue("cmbStreams", "");
1929  }
1930  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
1931  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
1932  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
1933  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1934// Upload Corrections
1935  if (!uploadMountpointsOut.isEmpty()) {
1936    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1937  }
1938  else {
1939    settings.setValue("uploadMountpointsOut", "");
1940  }
1941  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
1942  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1943  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
1944  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
1945  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
1946// Upload Ephemeris
1947  settings.setValue("uploadEphHost",      _uploadEphHostLineEdit->text());
1948  settings.setValue("uploadEphPort",      _uploadEphPortLineEdit->text());
1949  settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1950  settings.setValue("uploadEphPassword",  _uploadEphPasswordLineEdit->text());
1951  settings.setValue("uploadEphSample",    _uploadEphSampleSpinBox->value());
1952
1953  if (_caster) {
1954    _caster->readMountPoints();
1955  }
1956
1957  _pppWidgets.saveOptions();
1958}
1959
1960// All get slots terminated
1961////////////////////////////////////////////////////////////////////////////
1962void bncWindow::slotGetThreadsFinished() {
1963  BNC_CORE->slotMessage("All Get Threads Terminated", true);
1964  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
1965  delete _casterEph; _casterEph = 0;
1966  _runningRealTime = false;
1967}
1968
1969// Start It!
1970////////////////////////////////////////////////////////////////////////////
1971void bncWindow::slotStart() {
1972  saveOptions();
1973  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1974    _runningPPP = true;
1975    enableStartStop();
1976    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1977    BNC_CORE->startPPP();
1978    _bncFigurePPP->reset();
1979  }
1980  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1981    if (_reqcActionComboBox->currentText() == "Analyze") {
1982      _runningQC = true;
1983      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1984      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1985      reqcAnalyze->start();
1986    }
1987    else {
1988      _runningEdit = true;
1989      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1990      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1991      reqcEdit->start();
1992    }
1993    enableStartStop();
1994  }
1995  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
1996    _runningSp3Comp = true;
1997    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
1998    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1999    sp3Comp->start();
2000    enableStartStop();
2001  }
2002  else {
2003    startRealTime();
2004    BNC_CORE->startPPP();
2005  }
2006}
2007
2008// Start Real-Time (Retrieve Data etc.)
2009////////////////////////////////////////////////////////////////////////////
2010void bncWindow::startRealTime() {
2011
2012  _runningRealTime = true;
2013
2014  _bncFigurePPP->reset();
2015
2016  _actDeleteMountPoints->setEnabled(false);
2017
2018  enableStartStop();
2019
2020  _caster = new bncCaster();
2021
2022  BNC_CORE->setCaster(_caster);
2023  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2024  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2025  BNC_CORE->initCombination();
2026
2027  connect(_caster, SIGNAL(getThreadsFinished()),
2028          this, SLOT(slotGetThreadsFinished()));
2029
2030  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2031           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2032
2033  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION" ("BNC_OS") ==========", true);
2034
2035  bncSettings settings;
2036
2037  // Active panels
2038  // -------------
2039  if (!_rnxPathLineEdit->text().isEmpty())
2040      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2041  if (!_ephPathLineEdit->text().isEmpty())
2042      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2043  if (!_corrPathLineEdit->text().isEmpty())
2044      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2045  if (!_outPortLineEdit->text().isEmpty())
2046      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2047  if (!_serialMountPointLineEdit->text().isEmpty())
2048      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2049  if (!_adviseObsRateComboBox->currentText().isEmpty())
2050      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2051  if (!_miscMountLineEdit->text().isEmpty())
2052      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2053  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2054      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2055  if (_cmbTable->rowCount() > 0)
2056      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2057  if (_uploadTable->rowCount() > 0)
2058      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2059  if (!_uploadEphHostLineEdit->text().isEmpty())
2060      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2061
2062  QDir rnxdir(settings.value("rnxPath").toString());
2063  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2064
2065  QString rnx_file = settings.value("rnxScript").toString();
2066  if ( !rnx_file.isEmpty() ) {
2067    QFile rnxfile(settings.value("rnxScript").toString());
2068    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2069  }
2070
2071  QDir ephdir(settings.value("ephPath").toString());
2072  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2073
2074  QDir corrdir(settings.value("corrPath").toString());
2075  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2076
2077  QString advise_file = settings.value("adviseScript").toString();
2078  if ( !advise_file.isEmpty() ) {
2079    QFile advisefile(settings.value("adviseScript").toString());
2080    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2081  }
2082
2083  _caster->readMountPoints();
2084
2085  _casterEph = new bncEphUploadCaster();
2086  connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2087          _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2088}
2089
2090// Retrieve Data
2091////////////////////////////////////////////////////////////////////////////
2092void bncWindow::slotStop() {
2093  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2094                                   QMessageBox::Yes, QMessageBox::No,
2095                                   QMessageBox::NoButton);
2096  if (iRet == QMessageBox::Yes) {
2097    BNC_CORE->stopPPP();
2098    BNC_CORE->stopCombination();
2099    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2100    delete _casterEph; _casterEph = 0;
2101    _runningRealTime = false;
2102    _runningPPP      = false;
2103    enableStartStop();
2104  }
2105}
2106
2107// Close Application gracefully
2108////////////////////////////////////////////////////////////////////////////
2109void bncWindow::closeEvent(QCloseEvent* event) {
2110
2111  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2112                                   QMessageBox::Yes, QMessageBox::No,
2113                                   QMessageBox::Cancel);
2114
2115  if      (iRet == QMessageBox::Cancel) {
2116    event->ignore();
2117    return;
2118  }
2119  else if (iRet == QMessageBox::Yes) {
2120    slotSaveOptions();
2121  }
2122
2123  BNC_CORE->stopPPP();
2124
2125  QMainWindow::closeEvent(event);
2126}
2127
2128// User changed the selection of mountPoints
2129////////////////////////////////////////////////////////////////////////////
2130void bncWindow::slotSelectionChanged() {
2131  if (_mountPointsTable->selectedItems().isEmpty()) {
2132    _actDeleteMountPoints->setEnabled(false);
2133  }
2134  else {
2135    _actDeleteMountPoints->setEnabled(true);
2136  }
2137}
2138
2139// Display Program Messages
2140////////////////////////////////////////////////////////////////////////////
2141void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2142  if (showOnScreen ) {
2143    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2144  }
2145}
2146
2147// About Message
2148////////////////////////////////////////////////////////////////////////////
2149void bncWindow::slotAbout() {
2150 new bncAboutDlg(0);
2151}
2152
2153//Flowchart
2154////////////////////////////////////////////////////////////////////////////
2155void bncWindow::slotFlowchart() {
2156 new bncFlowchartDlg(0);
2157}
2158
2159// Help Window
2160////////////////////////////////////////////////////////////////////////////
2161void bncWindow::slotHelp() {
2162  QUrl url;
2163  url.setPath(":bnchelp.html");
2164  new bncHlpDlg(0, url);
2165}
2166
2167// Select Fonts
2168////////////////////////////////////////////////////////////////////////////
2169void bncWindow::slotFontSel() {
2170  bool ok;
2171  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2172  if (ok) {
2173    bncSettings settings;
2174    settings.setValue("font", newFont.toString());
2175    QApplication::setFont(newFont);
2176    int ww = QFontMetrics(newFont).width('w');
2177    setMinimumSize(60*ww, 80*ww);
2178    resize(60*ww, 80*ww);
2179  }
2180}
2181
2182// Whats This Help
2183void bncWindow::slotWhatsThis() {
2184  QWhatsThis::enterWhatsThisMode();
2185}
2186
2187//
2188////////////////////////////////////////////////////////////////////////////
2189void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2190  _threads = threads;
2191
2192  _bncFigure->updateMountPoints();
2193  _bncFigureLate->updateMountPoints();
2194
2195  populateMountPointsTable();
2196  bncSettings settings;
2197  _outSamplComboBox->findText(settings.value("outSampl").toString());
2198  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2199  QListIterator<bncGetThread*> iTh(threads);
2200  while (iTh.hasNext()) {
2201    bncGetThread* thread = iTh.next();
2202    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2203      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2204                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2205      if (url                                      == thread->mountPoint() &&
2206          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2207          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2208        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2209        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2210                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2211        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2212                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2213        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2214                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2215        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2216                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2217        break;
2218      }
2219    }
2220  }
2221}
2222
2223//
2224////////////////////////////////////////////////////////////////////////////
2225void bncWindow::CreateMenu() {
2226  // Create Menus
2227  // ------------
2228  _menuFile = menuBar()->addMenu(tr("&File"));
2229  _menuFile->addAction(_actFontSel);
2230  _menuFile->addSeparator();
2231  _menuFile->addAction(_actSaveOpt);
2232  _menuFile->addSeparator();
2233  _menuFile->addAction(_actQuit);
2234
2235  _menuHlp = menuBar()->addMenu(tr("&Help"));
2236  _menuHlp->addAction(_actHelp);
2237  _menuHlp->addAction(_actFlowchart);
2238  _menuHlp->addAction(_actAbout);
2239}
2240
2241// Toolbar
2242////////////////////////////////////////////////////////////////////////////
2243void bncWindow::AddToolbar() {
2244  QToolBar* toolBar = new QToolBar;
2245  addToolBar(Qt::BottomToolBarArea, toolBar);
2246  toolBar->setMovable(false);
2247  toolBar->addAction(_actAddMountPoints);
2248  toolBar->addAction(_actDeleteMountPoints);
2249  toolBar->addAction(_actMapMountPoints);
2250  toolBar->addAction(_actStart);
2251  toolBar->addAction(_actStop);
2252  toolBar->addWidget(new QLabel("                                           "));
2253  toolBar->addAction(_actwhatsthis);
2254}
2255
2256// About
2257////////////////////////////////////////////////////////////////////////////
2258bncAboutDlg::bncAboutDlg(QWidget* parent) :
2259   QDialog(parent) {
2260
2261  QTextBrowser* tb = new QTextBrowser;
2262  QUrl url; url.setPath(":bncabout.html");
2263  tb->setSource(url);
2264  tb->setReadOnly(true);
2265
2266  int ww = QFontMetrics(font()).width('w');
2267  QPushButton* _closeButton = new QPushButton("Close");
2268  _closeButton->setMaximumWidth(10*ww);
2269  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2270
2271  QGridLayout* dlgLayout = new QGridLayout();
2272  QLabel* img = new QLabel();
2273  img->setPixmap(QPixmap(":ntrip-logo.png"));
2274  dlgLayout->addWidget(img, 0,0);
2275  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2276  dlgLayout->addWidget(tb,1,0,1,2);
2277  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2278
2279  setLayout(dlgLayout);
2280  resize(60*ww, 60*ww);
2281  setWindowTitle("About BNC");
2282  show();
2283}
2284
2285//
2286////////////////////////////////////////////////////////////////////////////
2287bncAboutDlg::~bncAboutDlg() {
2288
2289};
2290
2291// Flowchart
2292////////////////////////////////////////////////////////////////////////////
2293bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2294   QDialog(parent) {
2295
2296  int ww = QFontMetrics(font()).width('w');
2297  QPushButton* _closeButton = new QPushButton("Close");
2298  _closeButton->setMaximumWidth(10*ww);
2299  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2300
2301  QGridLayout* dlgLayout = new QGridLayout();
2302  QLabel* img = new QLabel();
2303  img->setPixmap(QPixmap(":bncflowchart.png"));
2304  dlgLayout->addWidget(img, 0,0);
2305  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2306
2307  setLayout(dlgLayout);
2308  setWindowTitle("Flow Chart");
2309  show();
2310}
2311
2312//
2313////////////////////////////////////////////////////////////////////////////
2314bncFlowchartDlg::~bncFlowchartDlg() {
2315};
2316
2317// Enable/Disable Widget (and change its color)
2318////////////////////////////////////////////////////////////////////////////
2319void bncWindow::enableWidget(bool enable, QWidget* widget) {
2320
2321  const static QPalette paletteWhite(QColor(255, 255, 255));
2322  const static QPalette paletteGray(QColor(230, 230, 230));
2323
2324  widget->setEnabled(enable);
2325  if (enable) {
2326    widget->setPalette(paletteWhite);
2327  }
2328  else {
2329    widget->setPalette(paletteGray);
2330  }
2331}
2332
2333//  Bnc Text
2334////////////////////////////////////////////////////////////////////////////
2335void bncWindow::slotBncTextChanged(){
2336
2337  const static QPalette paletteWhite(QColor(255, 255, 255));
2338  const static QPalette paletteGray(QColor(230, 230, 230));
2339
2340  bool enable = true;
2341
2342  // Proxy
2343  //------
2344  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2345    enable = !_proxyHostLineEdit->text().isEmpty();
2346    enableWidget(enable, _proxyPortLineEdit);
2347  }
2348
2349  // RINEX Observations
2350  // ------------------
2351  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2352    enable = !_rnxPathLineEdit->text().isEmpty();
2353    enableWidget(enable, _rnxIntrComboBox);
2354    enableWidget(enable, _rnxSamplComboBox);
2355    enableWidget(enable, _rnxSkelLineEdit);
2356    enableWidget(enable, _rnxFileCheckBox);
2357    enableWidget(enable, _rnxScrpLineEdit);
2358    enableWidget(enable, _rnxV2Priority);
2359    enableWidget(enable, _rnxV3CheckBox);
2360
2361    bool enable1 = true;
2362    enable1 = _rnxV3CheckBox->isChecked();
2363    if (enable && enable1) {
2364    enableWidget(false, _rnxV2Priority);
2365    }
2366    if (enable && !enable1) {
2367    enableWidget(true, _rnxV2Priority);
2368    }
2369  }
2370
2371  // RINEX Observations, Signal Priority
2372  // -----------------------------------
2373  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2374    if (!_rnxPathLineEdit->text().isEmpty()) {
2375      enableWidget(enable, _rnxIntrComboBox);
2376      enable = !_rnxV3CheckBox->isChecked();
2377      enableWidget(enable, _rnxV2Priority);
2378    }
2379  }
2380
2381  // RINEX Ephemeris
2382  // ---------------
2383  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2384    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2385    enableWidget(enable, _ephIntrComboBox);
2386    enableWidget(enable, _ephV3CheckBox);
2387  }
2388
2389  // Broadcast Corrections
2390  // ---------------------
2391  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2392    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2393    enableWidget(enable, _corrIntrComboBox);
2394  }
2395
2396  // Feed Engine
2397  // -----------
2398  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2399    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2400    enableWidget(enable, _outWaitSpinBox);
2401    enableWidget(enable, _outSamplComboBox);
2402  }
2403
2404  // Serial Output
2405  // -------------
2406  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2407      sender() == _serialAutoNMEAComboBox) {
2408    enable = !_serialMountPointLineEdit->text().isEmpty();
2409    enableWidget(enable, _serialPortNameLineEdit);
2410    enableWidget(enable, _serialBaudRateComboBox);
2411    enableWidget(enable, _serialParityComboBox);
2412    enableWidget(enable, _serialDataBitsComboBox);
2413    enableWidget(enable, _serialStopBitsComboBox);
2414    enableWidget(enable, _serialFlowControlComboBox);
2415    enableWidget(enable, _serialAutoNMEAComboBox);
2416    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2417    enableWidget(enable2, _serialFileNMEALineEdit);
2418    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2419    enableWidget(enable3, _serialHeightNMEALineEdit);
2420    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2421  }
2422
2423  // Outages
2424  // -------
2425  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2426    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2427    enableWidget(enable, _adviseFailSpinBox);
2428    enableWidget(enable, _adviseRecoSpinBox);
2429    enableWidget(enable, _adviseScriptLineEdit);
2430  }
2431
2432  // Miscellaneous
2433  // -------------
2434  if (sender() == 0 || sender() == _miscMountLineEdit) {
2435    enable = !_miscMountLineEdit->text().isEmpty();
2436    enableWidget(enable, _miscIntrComboBox);
2437    enableWidget(enable, _miscScanRTCMCheckBox);
2438    enableWidget(enable, _miscPortLineEdit);
2439  }
2440
2441  // Enable/disable Broadcast Ephemerides
2442  // ------------------------------------
2443  if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2444    enable = !_uploadEphHostLineEdit->text().isEmpty();
2445    enableWidget(enable, _uploadEphPortLineEdit);
2446    enableWidget(enable, _uploadEphMountpointLineEdit);
2447    enableWidget(enable, _uploadEphPasswordLineEdit);
2448    enableWidget(enable, _uploadEphSampleSpinBox);
2449  }
2450
2451  // Combine Corrections
2452  // -------------------
2453  if (sender() == 0 || sender() == _cmbTable) {
2454    int iRow = _cmbTable->rowCount();
2455    if (iRow > 0) {
2456      enableWidget(true, _cmbMethodComboBox);
2457      enableWidget(true, _cmbMaxresLineEdit);
2458      enableWidget(true, _cmbSamplSpinBox);
2459      enableWidget(true, _cmbUseGlonass);
2460    }
2461    else {
2462      enableWidget(false, _cmbMethodComboBox);
2463      enableWidget(false, _cmbMaxresLineEdit);
2464      enableWidget(false, _cmbSamplSpinBox);
2465      enableWidget(false, _cmbUseGlonass);
2466    }
2467  }
2468
2469  // Upload(clk)
2470  // -----------
2471  int iRow = _uploadTable->rowCount();
2472  if (iRow > 0) {
2473    enableWidget(true, _uploadIntrComboBox);
2474    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2475    enableWidget(true, _uploadSamplClkRnxSpinBox);
2476    enableWidget(true, _uploadSamplSp3SpinBox);
2477    enableWidget(true, _uploadAntexFile);
2478  }
2479  else {
2480    enableWidget(false, _uploadIntrComboBox);
2481    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2482    enableWidget(false, _uploadSamplClkRnxSpinBox);
2483    enableWidget(false, _uploadSamplSp3SpinBox);
2484    enableWidget(false, _uploadAntexFile);
2485  }
2486
2487  // QC
2488  // --
2489  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2490    enable = !_reqcActionComboBox->currentText().isEmpty();
2491    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2492//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2493    enableWidget(enable,                            _reqcObsFileChooser);
2494    enableWidget(enable,                            _reqcNavFileChooser);
2495    enableWidget(enable,                            _reqcOutLogLineEdit);
2496    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2497    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2498    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2499    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2500    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2501//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2502    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2503  }
2504
2505  // SP3 File Comparison
2506  // -------------------
2507  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2508    enable = !_sp3CompFileChooser->fileName().isEmpty();
2509    enableWidget(enable, _sp3CompLogLineEdit);
2510    enableWidget(enable, _sp3CompExclude);
2511  }
2512
2513  enableStartStop();
2514}
2515
2516//
2517////////////////////////////////////////////////////////////////////////////
2518void bncWindow::slotAddCmbRow() {
2519  int iRow = _cmbTable->rowCount();
2520  _cmbTable->insertRow(iRow);
2521  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2522    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2523  }
2524}
2525
2526//
2527////////////////////////////////////////////////////////////////////////////
2528void bncWindow::slotDelCmbRow() {
2529
2530  const static QPalette paletteWhite(QColor(255, 255, 255));
2531  const static QPalette paletteGray(QColor(230, 230, 230));
2532
2533  int nRows = _cmbTable->rowCount();
2534  bool flg[nRows];
2535  for (int iRow = 0; iRow < nRows; iRow++) {
2536    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2537      flg[iRow] = true;
2538    }
2539    else {
2540      flg[iRow] = false;
2541    }
2542  }
2543  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2544    if (flg[iRow]) {
2545      _cmbTable->removeRow(iRow);
2546    }
2547  }
2548  nRows = _cmbTable->rowCount();
2549  if (nRows < 1) {
2550    enableWidget(false, _cmbMethodComboBox);
2551    enableWidget(false, _cmbMaxresLineEdit);
2552    enableWidget(false, _cmbSamplSpinBox);
2553    enableWidget(false, _cmbUseGlonass);
2554  }
2555}
2556
2557//
2558////////////////////////////////////////////////////////////////////////////
2559void bncWindow::populateCmbTable() {
2560
2561  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2562    _cmbTable->removeRow(iRow);
2563  }
2564
2565  bncSettings settings;
2566
2567  int iRow = -1;
2568  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2569  while (it.hasNext()) {
2570    QStringList hlp = it.next().split(" ");
2571    if (hlp.size() > 2) {
2572      ++iRow;
2573      _cmbTable->insertRow(iRow);
2574    }
2575    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2576      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2577    }
2578  }
2579}
2580
2581//
2582////////////////////////////////////////////////////////////////////////////
2583void bncWindow::slotAddUploadRow() {
2584  int iRow = _uploadTable->rowCount();
2585  _uploadTable->insertRow(iRow);
2586  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2587    if      (iCol == 3) {
2588      QLineEdit* passwd = new QLineEdit();
2589      passwd->setFrame(false);
2590      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2591      _uploadTable->setCellWidget(iRow, iCol, passwd);
2592    }
2593    else if (iCol == 4) {
2594      QComboBox* system = new QComboBox();
2595      system->setEditable(false);
2596      system->addItems(QString("IGS14,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2597      system->setFrame(false);
2598      _uploadTable->setCellWidget(iRow, iCol, system);
2599    }
2600    else if (iCol == 5) {
2601      QCheckBox* com = new QCheckBox();
2602      _uploadTable->setCellWidget(iRow, iCol, com);
2603    }
2604    else if (iCol == 11) {
2605      bncTableItem* bncIt = new bncTableItem();
2606      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2607      _uploadTable->setItem(iRow, iCol, bncIt);
2608      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2609    }
2610    else {
2611      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2612    }
2613  }
2614}
2615
2616//
2617////////////////////////////////////////////////////////////////////////////
2618void bncWindow::slotDelUploadRow() {
2619  BNC_CORE->_uploadTableItems.clear();
2620  int nRows = _uploadTable->rowCount();
2621  bool flg[nRows];
2622  for (int iRow = 0; iRow < nRows; iRow++) {
2623    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2624      flg[iRow] = true;
2625    }
2626    else {
2627      flg[iRow] = false;
2628    }
2629  }
2630  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2631    if (flg[iRow]) {
2632      _uploadTable->removeRow(iRow);
2633    }
2634  }
2635  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2636    BNC_CORE->_uploadTableItems[iRow] =
2637                                (bncTableItem*) _uploadTable->item(iRow, 11);
2638  }
2639  nRows = _uploadTable->rowCount();
2640  if (nRows < 1) {
2641    enableWidget(false, _uploadIntrComboBox);
2642    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2643    enableWidget(false, _uploadSamplSp3SpinBox);
2644    enableWidget(false, _uploadSamplClkRnxSpinBox);
2645    enableWidget(false, _uploadAntexFile);
2646  }
2647}
2648
2649//
2650////////////////////////////////////////////////////////////////////////////
2651void bncWindow::populateUploadTable() {
2652  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2653    _uploadTable->removeRow(iRow);
2654  }
2655
2656  bncSettings settings;
2657
2658  int iRow = -1;
2659  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2660  while (it.hasNext()) {
2661    QStringList hlp = it.next().split(",");
2662    if (hlp.size() > 6) {
2663      ++iRow;
2664      _uploadTable->insertRow(iRow);
2665    }
2666    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2667      if      (iCol == 3) {
2668        QLineEdit* passwd = new QLineEdit();
2669        passwd->setFrame(false);
2670        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2671        passwd->setText(hlp[iCol]);
2672        _uploadTable->setCellWidget(iRow, iCol, passwd);
2673      }
2674      else if (iCol == 4) {
2675        QComboBox* system = new QComboBox();
2676        system->setEditable(false);
2677        system->addItems(QString("IGS14,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2678        system->setFrame(false);
2679        system->setCurrentIndex(system->findText(hlp[iCol]));
2680        _uploadTable->setCellWidget(iRow, iCol, system);
2681      }
2682      else if (iCol == 5) {
2683        QCheckBox* com = new QCheckBox();
2684        if (hlp[iCol].toInt() == Qt::Checked) {
2685          com->setCheckState(Qt::Checked);
2686        }
2687        _uploadTable->setCellWidget(iRow, iCol, com);
2688      }
2689      else if (iCol == 11) {
2690        bncTableItem* bncIt = new bncTableItem();
2691        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2692        _uploadTable->setItem(iRow, iCol, bncIt);
2693        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2694      }
2695      else {
2696        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2697      }
2698    }
2699  }
2700}
2701
2702//
2703////////////////////////////////////////////////////////////////////////////
2704void bncWindow::slotSetUploadTrafo() {
2705  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2706  dlg->exec();
2707  delete dlg;
2708}
2709
2710// Progress Bar Change
2711////////////////////////////////////////////////////////////////////////////
2712void bncWindow::slotPostProcessingProgress(int nEpo) {
2713  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2714}
2715
2716// Post-Processing Reqc Finished
2717////////////////////////////////////////////////////////////////////////////
2718void bncWindow::slotPostProcessingFinished() {
2719  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2720  _runningPPP     = false;
2721  _runningEdit    = false;
2722  _runningQC      = false;
2723  _runningSp3Comp = false;
2724  _actStart->setText(tr("Sta&rt"));
2725  enableStartStop();
2726}
2727
2728// Edit teqc-like editing options
2729////////////////////////////////////////////////////////////////////////////
2730void bncWindow::slotReqcEditOption() {
2731  saveOptions();
2732  reqcDlg* dlg = new reqcDlg(this);
2733  dlg->move(this->pos().x()+50, this->pos().y()+50);
2734  dlg->exec();
2735  delete dlg;
2736}
2737
2738// Enable/Disable Start and Stop Buttons
2739////////////////////////////////////////////////////////////////////////////
2740void bncWindow::enableStartStop() {
2741  if ( running() ) {
2742    _actStart->setEnabled(false);
2743    if (_runningRealTime || _runningPPP) {
2744      _actStop->setEnabled(true);
2745    }
2746  }
2747  else {
2748    _actStart->setEnabled(true);
2749    _actStop->setEnabled(false);
2750  }
2751}
2752
2753// Show Map
2754////////////////////////////////////////////////////////////////////////////
2755void bncWindow::slotMapMountPoints() {
2756  saveOptions();
2757  t_bncMap* bncMap = new t_bncMap(this);
2758  bncMap->setMinimumSize(800, 600);
2759  bncMap->setWindowTitle("Selected Mountpoints");
2760
2761  bncSettings settings;
2762  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2763  while (it.hasNext()) {
2764    QStringList hlp = it.next().split(" ");
2765    if (hlp.size() < 5) continue;
2766    QUrl   url(hlp[0]);
2767    double latDeg = hlp[3].toDouble();
2768    double lonDeg = hlp[4].toDouble();
2769    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2770  }
2771
2772  bncMap->show();
2773}
2774
2775// Show Map
2776////////////////////////////////////////////////////////////////////////////
2777void bncWindow::slotMapPPP() {
2778#ifdef QT_WEBKIT
2779  saveOptions();
2780  enableWidget(false, _pppWidgets._mapWinButton);
2781  enableWidget(false, _pppWidgets._useGoogleMap);
2782  enableWidget(false, _pppWidgets._useOpenStreetMap);
2783  enableWidget(false, _pppWidgets._mapWinDotSize);
2784  enableWidget(false, _pppWidgets._mapWinDotColor);
2785
2786  if (!_mapWin) {
2787    _mapWin = new bncMapWin(this);
2788    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2789    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2790            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2791  }
2792  _mapWin->show();
2793#else
2794  QMessageBox::information(this, "Information",
2795                           "Qt Library compiled without QtWebKit");
2796#endif
2797}
2798
2799// Show Map
2800////////////////////////////////////////////////////////////////////////////
2801void bncWindow::slotMapPPPClosed() {
2802#ifdef QT_WEBKIT
2803  enableWidget(true, _pppWidgets._mapWinButton);
2804  enableWidget(true, _pppWidgets._useGoogleMap);
2805  enableWidget(true, _pppWidgets._useOpenStreetMap);
2806  enableWidget(true, _pppWidgets._mapWinDotSize);
2807  enableWidget(true, _pppWidgets._mapWinDotColor);
2808  if (_mapWin) {
2809    QListIterator<bncGetThread*> it(_threads);
2810    while (it.hasNext()) {
2811      bncGetThread* thread = it.next();
2812      thread->disconnect(_mapWin);
2813    }
2814    _mapWin->deleteLater();
2815    _mapWin = 0;
2816  }
2817#endif
2818}
Note: See TracBrowser for help on using the repository browser.